In 
Products   Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
209.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
The wind turbine with the coreless permanent magnet generator and three high-strength fiberglass blades is more durable and has a long service life. The spiral blades are aerodynamically designed to make the rotor run smoothly and reliably, which leads to stable electricity generation.
$
216.00
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
MidNite Solar MNPV12 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry.
$
126.00
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Large ratio of tip section chord to root section chord and variable chord airfoil blade ensures rotor start-up easily and running smoothly with high torque & RPM at low wind conditions Aerodynamic blades designed with over-speed dynamic blade braking systems ensure the generator is well protected in higher winds.
$
130.50
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
MidNite Solar MNPV6 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry.
$
17.99
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Stop getting twisted!! Gold Plated Contacts Heavy 30 amp Per conductor slip ring total 60 amps....Great for even heavy 12 volt environment Specs ---30 amps per conductor --- 250 volts AC/DC per circuit ---2200 watts per conductor --- rpms 0-300 ---Gold Plated Contacts ---Operational Lifespan: 80,000,000 revolutions depending on temperature, rotation speed and enviroment ---DC applications by using two conductors to cut down on the resistance. If you have application specific questions feel free to ask me before buying. Has 3 mounting holes in collar and long wires for easy installation. To International buyers: the sales price does not include customs or duties that your country may include. Hurricane Wind Power does not know the policies of every customs department worldwide nor their tax schedules.
$
18.79
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Stop getting twisted!! Gold Plated Contacts Heavy 30 amp Per conductor slip ring total 90 amps....Great for even heavy 12 volt environment wind generators as used in our Hurricane XP turbines Specs ---30 amps per conductor --- 250 volts AC/DC per circuit ---2200 watts per conductor --- rpms 0-300 ---Gold Plated Contacts ---Operational Lifespan: 80,000,000 revolutions depending on temperature, rotation speed and enviroment This rotating connector will be great for the wind generator. The current can be split up in DC applications by using two conductors to cut down on the resistance. If you have application specific questions feel free to ask me before buying. Has 3 mounting holes in colar and long wires for easy installation. To International buyers: the sales price does not include customs or duties that your country may include.
$
37.79
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Set of 2 Heavy 100 Amp Rectifier ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage. ---This item is used to convert 3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool. ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose. ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar. Powered by [eBay Turbo Lister] (http://pages.ebay.com/turbo_lister/) The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.
$
19.79
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
This listing is for: One Heavy 100 Amp Rectifier ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage. ---This item is used to convert 3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool. ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose. ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar. Powered by [eBay Turbo Lister] (http://pages.ebay.com/turbo_lister/) The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.
$
24.29
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Heavy 100 Amp Rectifier with Spade Terminals and Heat Shrink Includes: 1 - Heavy 100 Amp Rectifier 5 - Spade Terminals 3/8 Inch 0.375 UL Listed 5 - 1/2 Inch Heat Shrink Tubing (1 Inch Length) Heavy 100A Rectifier: ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage ---This item is used to convert 3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar Spade Terminals 3/8 Inch 0.
$
22.49
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Locking Collar Fits 1 1/2" Pipe for Wind Turbine Generator Inside Diameter 1-15/16" Outside Diameter 3" Features: ---High Quality Steel Construction ---Zinc Plated to Prevent Rusting ---Single Allen Set Screw [FREE TRIAL Add a map to your own listings FREE Trial!] (https://newage.mystoremaps.com//echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=3) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
9.89
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Yaw Bearing OK folks here is the deal I use this stuff and I know what it will and will not do. Plating this thing with "zinc" will not cause this not to rust. The rollers on this bearing are under constant friction and any applied coating will wear away in short order . These bearings must be packed in grease and when they are they do help DIY wind turbines track better in the wind. However it is an inexpensive part and we find no reason to grand stand and make it seem like it is something it is not for the sake of charging a high $ This listing is for one Yaw Bearing to be used on 1 1/2 inch diameter tower pipes to allow the wind turbine head to turn easily.
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
(Multiple Values) Flexcharge DC Surge Arrester 36-48 Volts Model: SA3648DC US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. Near by lighting strikes, switches, relays, and static electricity can all cause damaging spikes and surges in your electrical system on the DC and AC sides. The Flexcharge Surge Arresters are completely transparent to the system until the voltage on the system reaches the breakdown voltage of the unit. Normally, high voltage spikes that are dissipated by the surge arrester will not damage the surge arrester and it will continue to protect your circuit.
$
130.50
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
MIDNITE SOLAR STOP SWITCH FOR WIND TURBINES 63AMP 150VDC MNSTOPSWITCH *ACCESSORY FOR MIDNITE SOLAR CHINOOK 200 WIND TURBINE (Chinook 200 12, 24 and 48 Volt available in our eBay store) Disconnects turbine from batteries and shorts out turbine. Comes with neutral busbar and ground box terminal. ---Environmental Rating - Type 1 (Indoor) ---Warranty 5 yrs. ---Listed by ETL for US & Canada. ---Made in the USA.
$
156.00
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series - C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
$
360.00
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Click here to see description.
$
145.00
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
(Multiple Values) Xantrex This listing is for the C40 , C35 and C60 discussed for informational purposes only See other listings for optional meter C Series - C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
$
71.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Lot of 10...12Volt 30Amp DC Auto Reset Circuit Breaker Type 1 12V 30A DC Auto Reset Circuit Breaker (lot of 10) (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 30Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 30 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 30 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount.
$
1850.00
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Midnite DC Clipper MNCLIP1.5KDC2.4 Used with Midnite Classic MPPT Charge Controllers Please note that there is a 3 week lead time on this item. Each unit is built per order and shipped direct from the manufacturer The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can order custom other resistance values upon request. 1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic.
$
62.10
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Midnite Solar MNBIGBABY Big Baby Box General Use Enclosure This product is not intended for outdoor use! The Big Baby Box holds up to (4) 13mm wide dinrail breakers from 1-63 amps. The original Baby Box has been a huge success in filling an industry need. It does have it's short comings though as it is a very small enclosure. Midnite Solar has introduced their newest enclosure called the Big Baby. This box is one inch larger in all dimensions. It also includes a ground box lug and mounting provisions for our short insulated bus bar. See Product Documentation above for a dimensional drawing. Features ---Listed by ETL for US & Canada ---Enclosure: Powder coated aluminum ---Dinrail supports up to 4 breakers (not included) ---Ground terminal accepts up to 1/0 AWG.
$
69.30
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Midnite Solar MNEDC-QUAD General Use Enclosure The Quad Enclosure is a general use aluminum enclosure from Midnite. This box holds 4 MNEDC 80 (or Outback OBDC-80) type panel mount breakers. A dimensional drawing is located under the documents tab above. Breakers, busbars and grounding lugs are sold separately. Features ---Listed by ETL for US & Canada ---Enclosure: 16 gauge steel, gray powder coat ---Furnished with 4 breaker knockouts ---Conduit knockouts on each end ---Not recommended for use with cables larger than awg #4 (19mm).
$
109.80
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
MidNite Solar MNPV3 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry.
$
105.00
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Auction for: C35 model C40 and C60 discussed for line comparison only. Meter discussed in description does not come with charge control but available in other auctions Trace / Xantrex C Series - C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
$
56.69
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Midnite Solar BABY BOX MNBABYBOX General Use Enclosure This product is NOT UL listed, and not intended for outdoor use! (Formerly known as the Midnite Duo) Approx. dimensions: Height: 6.875", Width: 3", Depth: 2.625" Enclosure for 4 DIN rail breakers,such as Outback OBPV or OBAC. Use with DC systems up to 125 volts or AC up to 240 volts. Knockouts top and bottom for easy wiring. This product is not UL listed. It may not be possible to have code compliant bending radiuses with four breakers installed.
$
119.99
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-12 hybrid 12 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/12 charge controller - 12 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Free First Class next day shipping....road runner beep beep Dual 40 amp blocking diodes mounted in a foot mount heat sink What in the world is this thing?? If you are a newbie its essentially a one way valve for power...typical wind and solar applications include solar e.g. back flow of power discharging the batteries when the sun goes down. Also often used in DIY wind generator designs where a donor motor is used as a generator. Using the diode prevents the battery from powering the motor. There are many other uses but these are the 2 most frequesnt I know of for wind and solar.....They are also used in installation of watts view power meters This item is ideal for use with wind turbines such as those constructed using with Ametek and heavy tradmill motors.
$
283.50
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Midnite Solar MNPV-DISCO MNPV Disconnecting Combiner Box MNPV6 DISCO COMBINER Please Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
$
27.95
Buy It Now
Free Shipping
Condition: Used
Location: Pawtucket, United States
$
365.00
Buy It Now
Free Shipping
Condition: New
Location: , Greece
The wind generator using patented magnetic bearing alternator, coupled with a special stator design, effectively reduce the resistance torque of the generator, while the wind wheel and the generator has a more good matching characteristics, the unit running reliability.
$
209.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
400W 12V 3 Blades Helix Wind Turbine Generator Kit Vertical Axis Wind Power USA About This Item: Condition:New Controller system:  Electromagnetism  Starting Wind Speed: 2.5m/s   Cut-in Wind Speed: 2.5m(98inch)/S  Rated Wind Speed: 18m/s   Max Wind Speed:  ≤40 m/s  The instantaneous maximum wind speed≤45m/s Blades quantity:3 (3 different colors) Rotor Diameter of Blades:0.6m Blades height(m): 0.
$
209.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
The wind turbine with the coreless permanent magnet generator and three high-strength fiberglass blades is more durable and has a long service life. The spiral blades are aerodynamically designed to make the rotor run smoothly and reliably, which leads to stable electricity generation.
$
350.00
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Click here to see description.
$
350.00
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Click here to see description.
$
500.00
0 bids
Free Shipping
Condition: Used
Location: Blackfoot, United States
These are some blades I got that came from a government sale I believe. They are made of fiberglass. They are not broken and In good shape. I'm not sure exactly what they fit. They are 128 inches long and at the widest part are 29.5 inches wide. I will load them but buyer pays shipping.  If need addisional information please ask.
$
239.93
Buy It Now
Free Shipping
Condition: New
Location: Detroit, United States
VMAXTANKS AGM SOLAR BATTERY. HIGH POWER, AGM 12V SOLAR BATTERY. EXCELLENT BACK UP AND RALLY PRO PLUS GENERATOR GROUP 27 BATTERY. AGM Electrolyte Suspension System. Use 2 in parallel in your Rally Pro Generator and double the capacity.
$
149.99
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-48 hybrid 48 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/48 charge controller - 48 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
$
549.99
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Flexcharge Ultra High Efficiency 24V 100A Solar and Wind Charging System Controller Model: NCHC-24-100 US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. The patented circuit architecture developed during the design of the NC25A charge controller was used as the basis for the development of the NCHC family of controllers. Pretty it may not be, but the NCHC will regulate PV, Wind, or any other current limited charging source with the highest efficiency possible in an alternative energy system charge controller. For Lead Acid GEL, AGM, and Flooded cell Batteries. Also works with wet cell NiCad batteries.
$
424.99
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Flexcharge Ultra High Efficiency 12V 60A Solar and Wind Charging System Controller Model: NCHC-12-60 US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. The patented circuit architecture developed during the design of the NC25A charge controller was used as the basis for the development of the NCHC family of controllers. Pretty it may not be, but the NCHC will regulate PV, Wind, or any other current limited charging source with the highest efficiency possible in an alternative energy system charge controller. For Lead Acid GEL, AGM, and Flooded cell Batteries. Also works with wet cell NiCad batteries.
$
339.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
VMAX SLR125 12-Volt 125Ah AGM Deep Cycle High Performance Battery Quantity 1 Battery VMAX SLR125 12-Volt 125Ah AGM Deep Cycle High Performance Battery used for renewable energy projects such as solar panels, wind generators and micro hydro applications. VMAXTANKS SLR series is most ideal for all energy storage applications. Custom made military grade alloys are best match for such uses. Whether it’s for daily use or power back up, the SLR series is designed to withstand repeated cycles yet stay charged with minimum self-discharge in standby power back up modes. * Warning: Do not use a smaller charger or wet battery constant current charger to recharge any VMAX battery. Maintainers should ONLY be used to maintain a fully charged battery but NEVER as a charger. **Total Height including terminal post.
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
(Multiple Values) Flexcharge DC Surge Arrester 12-24 Volts Model: SA1224DC US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. Near by lighting strikes, switches, relays, and static electricity can all cause damaging spikes and surges in your electrical system on the DC and AC sides. The Flexcharge Surge Arresters are completely transparent to the system until the voltage on the system reaches the breakdown voltage of the unit. Normally, high voltage spikes that are dissipated by the surge arrester will not damage the surge arrester and it will continue to protect your circuit.
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
(Multiple Values) Flexcharge AC Surge Arrester 120 Volts Model: SA120VAC US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. Near by lighting strikes, switches, relays, and static electricity can all cause damaging spikes and surges in your electrical system on the DC and AC sides. The Flexcharge Surge Arresters are completely transparent to the system until the voltage on the system reaches the breakdown voltage of the unit. Normally, high voltage spikes that are dissipated by the surge arrester will not damage the surge arrester and it will continue to protect your circuit.
$
802.45
0 bids
Free Shipping
Condition: New
Location: Lexington, United States
690VAC 50Hz 1.6KW/3.2KW Dual Speed. LEGO MOTORS AKD112M-6B/4B. Wind Turbine Motor. Motor Weight; 108 lbs. We stand behind all our products. Money back if not satisfied.
$
30.46
0 bids
Free Shipping
Condition: New
Location: , China
Wire size: 10A=AWG#17; 20A=AWG#14; 30A=AWG#12;. 1 conductive slip ring. Rated current per ring (A): 30. Rated speed: 150RPM. Wire length: standard length 300mm. Working life: 10 million revolutions. Dynamic resistance change value: <0.01Ω.
$
289.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
VMAX SLR100 12-Volt 100Ah AGM Deep Cycle High Performance Battery Quantity 1 Battery VMAX SLR100 12-Volt 100Ah AGM Deep Cycle High Performance Battery used for renewable energy projects such as solar panels, wind generators and micro hydro applications. VMAX TANKS SLR series is most ideal for all energy storage applications. Custom made military grade alloys are best match for such uses. Whether it’s for daily use or power back up, the SLR series is designed to withstand repeated cycles yet stay charged with minimum self-discharge in standby power back up modes. * Warning: Do not use a smaller charger or wet battery constant current charger to recharge any VMAX battery. Maintainers should ONLY be used to maintain a fully charged battery but NEVER as a charger. **Total Height including terminal post.
$
71.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Lot of 10...12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 12V 20A DC Auto Reset Circuit Breaker (lot of 10) (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount.
$
71.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
Lot of 10...12Volt 40Amp DC Auto Reset Circuit Breaker Type 1 12V 40A DC Auto Reset Circuit Breaker (lot of 10) (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 40Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 40 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 40 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount.
$
71.99
Buy It Now
Free Shipping
Condition: New
Location: Roanoke, United States
(Multiple Values) 12Volt 50Amp DC Auto Reset Circuit Breaker (Lot of 10) You are bidding on a (Lot of 10) 12V 50A DC Auto Reset Circuit Breakers (Single Pole Thermal Type 1 Breakers) This product is designed to allow a current under 50 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 50 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 50 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Application: Battery Chargers, Trucks, Buses, RVs, Trolling Motors, etc. [FREE! Sellers: Add a FREE map to your listings. FREE!] (https://newage.mystoremaps.com//echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=2) Froo www.froo.
$
129.99
0 bids
Free Shipping
Condition: New
Location: Roanoke, United States
Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-24 hybrid 24 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/24 charge controller - 24 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
1
 In