|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
0 bids $129.00 Shipping
Condition: Used Location: Brooklyn, United States
Sartorius Arium Comfort | Water Purification System. Be Well Be Safe!
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: , China
Fits most 55 gallon drums.Ideal for heating up WVO for settling or processing biodiesel. 1pc Silicon heater (the drum not included). Drum Size:200 L(55Gallon). Compressive strength: 1500V / 5S. Insulation resistance: >= 5 Mohm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: Used Location: Johns Island, United States
Buy It Now
Free Shipping
Condition: New Location: North Charleston, United States
Flow: 25gpm @ 1800rpm. It consists of pump body, baseplate, gear, bearing seat and safety valve, bearing, seal etc. Body and bearing seat are made of cast iron. Gear is made of high grade carbon steel.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Power: 550W. Compatible with oil, diesel, bio-diesel or kerosene. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances! Pump type：Diesel pump.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Power: 550W. Compatible with oil, diesel, bio-diesel or kerosene. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances! Pump type：Diesel pump.
0 bids Free Shipping
Condition: New Location: , United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
110V AC Self Priming Electric Fuel Transfer Pump Oil Fuel Diesel Kerosene 16GPM. Power: 550W. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more.
Buy It Now
$4.95 Shipping
Condition: New Location: Portland, United States
Build your own gear, this trolley Pulley system is both light and strong. Steel sheaves NOT aluminum. This trolley is made for running on steel cable, but can also be used on rope. Build your own Zip line with this high quality Trolley.
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
0 bids $10.00 Shipping
Condition: New – Open box Location: Chino, United States
16GPM Self Priming Portable Electric Oil Pump Transfer Fuel Diesel 110V AC 550W. Compatible with oil, diesel, bio-diesel or kerosene. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
$7.00 Shipping
Condition: New – Open box Location: Chino, United States
Power: 550W. Compatible with oil, diesel, bio-diesel or kerosene. 60L/Min Electric Oil Fuel Diesel Transfer Pump Self-priming Diesel Pump 2800 rpm. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
Buy It Now
Free Shipping
Condition: New Location: North Charleston, United States
It has 14 gauge wires and draws 16.6A. Fuel Filter Heater Wrap 11" x 6", 200W, 12VDC — Diesel Fuel Filter Heater Wrap — Fits Most Large Canister Filters. Heated Filter Wrap 12V - 200W. 👍BUILT TO LAST —This fuel filter heater wrap is made of heavy duty heating material in the US by Arlon Silicone Technologies Division.
0 bids $9.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Model: ACTP60 Process: Painting Color: Yellow, Silver, Black Material: Cast Iron, Aluminum Alloy, Copper Plug Standard: US Standard Motor: AC 110V 60Hz Flow Rate: 20-60L/5.28-15.85gal/min Power: 550Watts Self Priming Max. Speed: 3300rpm Suction Height: 5m/16ft Max Lift: 15m/49ft.
0 bids $15.00 Shipping
Condition: New Location: Rancho Cucamonga, United States
By heating the barrel, easy to remove coagulum and liquid, as the barrel adhesive, grease, tar, paint, wax, oil, and various resin materials. 1 set of Oil Drum Heater 110v 153157. 125 1740mm(4.92" 68.5") 110v 30~150℃ 200L(53Gallon) 1KW.
0 bids Free Shipping
Condition: New Location: , China
JSRGO@ quality are among the highest in the industry. It features Strength, Flexibility. - CE / UL Certified Heater with One Year Warranty! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
Buy It Now
Free Shipping
Condition: New Location: , United States
Drum Size:200 L(55Gallon). Fits most 55 gallon drums.Ideal for heating up WVO for settling or processing biodiesel. 1pc s Silicon heater(the drum not included). Compressive strength: 1500V / 5S. Insulation resistance: >= 5 Mohm.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Compatible with oil, diesel, bio-diesel or kerosene. 550W Self-Priming Diesel Pump 60 L/min Fuel Transfer 2800 rpm Pump Kit. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power：1500W. By heating the barrel, easy to remove coagulum and liquid, as the barrel adhesive, grease, tar, paint, wax, oil, and various resin materials. By the barrel heated to a uniform decrease in viscosity, reducing pump skill.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Model: ACTP60 Process: Painting Color: Yellow, Silver, Black Material: Cast Iron, Aluminum Alloy, Copper Plug Standard: US Standard Motor: AC 110V 60Hz Flow Rate: 20-60L/5.28-15.85gal/min Power: 550Watts Self Priming Max. Speed: 3300rpm Suction Height: 5m/16ft Max Lift: 15m/49ft.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Specification: Contruction: Cast Iron Motor: 110V AC 550Watts 60hz Self Priming Flow Rate: 60L/Min (5.25-15.75 GPM) Max Pressure: 44PSI (3Bar) Suction Height: 3-5m (16ft) max Lift: 5-10m Continous Duty Cycle 5" x 9-3/8" x 6-1/4" H Induction Motor with aluminum casing In Built Fitler Easily accessible for cleaning With self priming pump and bypass valve. Package Includes: 1x Electric Oil Pump Transfer Fuel Diesel.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Technical Parameters: Product Type: Self-Priming Diesel Pump Inlet and Outlet: 25mm (1 inch) PVC Inlet hose: 2 m Rubber Outlet Hose: 4 m Lifting height ：10-15 m Power: 550W Voltage：110V（DC），50HZ Noise Level: <70 dB Power (x/hp) / Speed (rpm)： 2800 rpm Maximum pressure: 0.29 MPa, 3 bar, 42 PSI Maximum flow capacity: 60 L/min Gross Weight: 13.5 kg Package Size:43*26*25cm Delivery: 1 Piece Dieselpume DP60L 1x PVC inlet hose（2m） 1x Rubber drain hose（4m） 2x Inlet Hose Mounting Circuits 1x Fuel Filter 1x Inlet Hose Fitting.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Transferring light fuel pumping applications such as diesel fuel, biodiesel and kerosene. Motor: 110V AC 370Watts 60hz Self Priming. The primary usage of this pump is to fueling vehicle or transferring fuel to gaddy fuel tank.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket Note: Manual measurement, please allow 2-3cm error.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping
Condition: New Location: , United States
Heating Blanket, SRL Series, Temp. Range (C) -51 Degrees to 232 Degrees, Temp. Range (F) -60 Degrees to 450 Degrees F, Max. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Buy It Now
Free Shipping
Condition: New – Open box Location: Chino, United States
Power: 550w. Compatible with Oil, Diesel, Bio-diesel or Kerosene. Do Not Use the Diesel Pump and Fuel Oil Pump for Pumping Water, Gasoline or Flammable, Volatile Substances! Pump Type：diesel Pump.
Buy It Now
Free Shipping
Condition: New Location: Minooka, United States
BRISKHEAT DHLS15. PENTAIR/PENTEK 255074-75 Filter Bag,600 micron,32" L,Size 2,PK20. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Buy It Now
Free Shipping
Condition: New Location: Watertown, United States
Notice: This pump is intended for oil above 40 degrees and not heavier than 15w40. It can be used to transfer bulk or waste oil, transmission fluid, hydraulic oil, antifreeze, vegetable oil, diesel, and fuel oil.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Compatible with oil, diesel, bio-diesel or kerosene. 110v AC 16GPM Electric Diesel Oil Fuel Transfer Extractor Pump w/Nozzle Hose. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
Buy It Now
Free Shipping
Condition: New Location: , United States
Fits most 55 gallon drums.Ideal for heating up WVO for settling or processing biodiesel. 1pc Silicon heater (the drum not included). Drum Size:200 L(55Gallon). Compressive strength: 1500V / 5S. Insulation resistance: >= 5 Mohm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: , United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel. With self priming pump and bypass valve.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel. Motor: 110V AC 550Watts 60hz Self Priming.
Buy It Now
Free Shipping
Condition: New – Open box Location: Bristol, United States
Part Number: AP25P4S. Micron: 25. Item: Polyester Filter Bags. Length: 14".
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Compatible with oil, diesel, bio-diesel or kerosene. 550W Self-Priming Diesel Pump 60 L/min Fuel Transfer 2800 rpm Pump Kit. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
Buy It Now
Free Shipping
Condition: New – Open box Location: Chino, United States
Compatible with oil, diesel, bio-diesel or kerosene. 550W Self-Priming Diesel Pump 60 L/min Fuel Transfer 2800 rpm Pump Kit. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
0 bids Free Shipping
Condition: New Location: Pasadena, United States
110V AC 550Watts 60hz Self Priming. 1 x Manual Filling Nozzle. With self priming pump and bypass valve. Oil Transfer Pump. Induction Motor with aluminum casing. Inlet hose length. Outlet hose length.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Condition: New: New Product Type: Self-Priming Diesel Pump Pump type：Diesel pump Inlet and Outlet: 25mm (1 inch) PVC Inlet hose: 2 m Rubber Outlet Hose: 4 m Lifting height ：10-15 m Power: 550W Voltage：110（DC），50HZ Noise Level: <70 dB Power (x/hp) / Speed (rpm)： 2800 rpm Maximum pressure: 0.29 MPa, 3 bar, 42 PSI Maximum flow capacity: 60 L/min Gross Weight: 13.5 kg Package Size:43*26*25cm Installation Instructions: Not included Brand: Unbranded Product function description:.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel. Motor: 110V AC 550Watts 60hz Self Priming.
0 bids Free Shipping
Condition: New Location: Chino, United States
Mediums that can only be transferred: diesel and paraffin. Petrol and motor oil are not allowed. Description The electric oil pump with a portable handle can make it easier for you to take it to the workplace. The powerful power of 550W can help you finish your work quickly and well. It is a "self-priming" electric oil pump, which means you do not need to fill the water pump before the first use. It will be a good helper for enterprises, mines, construction sites, fishing boats, pleasure boats, and small refueling points. Key Features High-quality Material: This product adopts an high-quality full copper coil, and cast iron structure. High-quality materials and painting process make it has the performance of anti-corrosion, anti-rust, and strong pressure resistance, thus can effe.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Condition: New: New Product Type: Self-Priming Diesel Pump Pump type：Diesel pump Inlet and Outlet: 25mm (1 inch) PVC Inlet hose: 2 m Rubber Outlet Hose: 4 m Lifting height ：10-15 m Power: 550W Voltage：110（DC），50HZ Noise Level: <70 dB Power (x/hp) / Speed (rpm)： 2800 rpm Maximum pressure: 0.29 MPa, 3 bar, 42 PSI Maximum flow capacity: 60 L/min Gross Weight: 13.5 kg Package Size:43*26*25cm Installation Instructions: Not included Brand: Unbranded Delivery: 1 Piece Dieselpume DP60L 1x PVC inlet hose（2m） 1x Rubber drain hose（4m） 2x Inlet Hose Mounting Circuits 1x Fuel Filter 1x Inlet Hose Fitting.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
1740 250 1.8mm Rubber Heater 2000W. By heating the barrel, easy to remove coagulum and liquid, as the barrel adhesive, grease, tar, paint, wax, oil, and various resin materials. 110V Oil Drum Heater Silicone Heating Blanket.
Buy It Now
Free Shipping
Condition: Used Location: Morton, United States
Buy It Now
$9.99 Shipping
Condition: New Location: Prior Lake, United States
This WarmGuard Bucket Heater offers an energy-efficient solution for keeping liquid flowing in cold weather. With the insulated full-wrap design, this heater provides uniform heat to preserve expensive materials without scorching or burning.
Buy It Now
Free Shipping
Condition: New – Open box Location: Rowland Heights, United States
Transferring light fuel pumping applications such as diesel fuel, biodiesel and kerosene. Motor: 110V AC 370Watts 60hz Self Priming. The primary usage of this pump is to fueling vehicle or transferring fuel to gaddy fuel tank.
Buy It Now
Free Shipping
Condition: New Location: North Charleston, United States
25gpm(45 liters/min): 1" NPT threaded ports, 1.25" hose barbs. Uses a robust Baldor 1hp 3450RPM motor for moving motor oil, gear oil etc. Voila, a portable and fast gear pump for high viscosity fluids.
0 bids Free Shipping
Condition: New Location: , China
155 X 1740mm. - FAQs, All Size Database, Installation Guidance can be found on our Website. / GIS insulation cover / Nitrogen Bottle heater/ Food Kitchen Pizza Heating Pads. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
53Gallon Barrel Band Heater Pail Heater 102 1778 1.8mm. 102 1778mm(4.02" 70") 110V 30~150℃ 200L(53Gallon) 0.75KW. 110V Oil Drum Heater. By heating the barrel, easy to remove coagulum and liquid, as the barrel adhesive, grease, tar, paint, wax, oil, and various resin materials.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Brand BP MPN 160009 UPC Does not apply Custom Bundle No Warranty 1 year California Prop 65 Warning Passed Country/Region of Manufacture China Contruction Cast Iron Self Priming Pump Yes Bypass Valve Yes Motor 110V AC 550Watts 60hz Self Priming Flow Rate 20-60L/Min (16 GPM) Max Pressure 44PSI (3Bar) Suction Height 3-5m (16ft) Absorbing Distance 5m Speed Rang 2800（r/m） Size 5" x 9-3/8" x 6-1/4".
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
|
|
|
|
Funnel is 8.25 inches tall and 5 inch diameter. Very nice condition. The two bottles have glass stoppers. No chips. They are 5.5 inches tall and 2 1/8 inch diameter. These either came out of a pharmacy or high school lab. Last are two beakers. Small one is two table spoons and is 3 5/8 inches tall and 1 7/8 inch diameter at top. Big one is 125ml or 4 oz. with Fancy lettering or numbering etched in side. It is 6.75 inches tall and 2.75 inches diameter at top. No chips or cracks. Nice group. Email any questions. Thanks.
|
|
|
Im listing this as used. However it may be new, I cant tell. It heats right up and looks fantastic.
|
|
removed from service this is a large stainless filter housing only seems to have been used for filtering water. Will need to be cleaned has 1" inlet/ outlet ports and 3/4" drain and 1/4" gauge port on top. the filters are 30" long so I would think you could stack 10" ones but not sure. this was band clamped to a cart so I dont have any mounting bracket here is the data sheet shipping weight 30 lbs TERMS: items are sold AS-IS/ as described. Some items offered with return privilege. Some are sold without please read return policy for specific item/s. Please ask any questions about payment, item condition or any other concerns before bidding, We try and ship promptly within 2-3 days of receiving payment. Tracking number provided upon shipment of goods. We may ship small ... moreitems via post office at our discretion. We do not ship freight collect on UPS accounts. We do not ship any other method i.e. FedEx etc. No international bidders at this time. PAYMENT: we accept paypal and other forms of payment please inquire. We try and answer all requests and questions in 24hours but do service and travel so we are not always available to get back to you in a few hors depending on schedule. Thanks for looking.
|
|
|
All American biodiesel processor used. Metal piping enclosed system. You can see the manufacturer we purchased it from at all american bio. com. Works great. We have the direction booklet to go with it. No longer making fuel because we now have a attached garage. pick up or shipping paid by buyer. Contact me and we can figure out shipping. I can deliver it to a trucking terminal in Milwaukee WI to save on shipping. call to arrange a shipping quote 414 530 2405
|
|
This is a 15 gallon per minute biodiesel cavitation reactor manufactured by FM Mathis and Sons in 2011. The unit is powered by 480VAC. And requires a feedstock stream of vegetable oil, methanol, and liquid catalyst at a measured dosage rate. Alternatively you can mix all the chemicals in one tank and let the reactor pull from that tank to another tank, reacting it into biodiesel as it goes. Input stream should be at least 140F for a thorough reaction, but lower temperatures have been successful as well. This unit has less than 100 hours on it. And was working without problems when pulled from service. Owner upgraded to higher throughput system soon after purchasing. This unit makes biodiesel very well and technical support is available from the manufacturer. Unit weighs approximately 800 lbs ... moreand may be shipped via LTL freight. Or is available for local pickup in ZIP code 27893. This unit is guaranteed not DOA but otherwise comes with no warranty or guarantees.
|
|
Item Information Item Name: Operational Biodiesel Plant 100.000 gal/month Item# 9705 Price/Each: $435.000.00 Year: 2007 Brand Name: Model: Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Operational BioDiesel Plant Information on the components of the system can be found in the images below: This is an operational BioDiesel plant that has just been idled this summer. All plumbing is hooked up. Boilers are in place and electrical is explosion proof. Plant can be professionally taken apart ... moreand loaded on trucks or in containers. This plant can produce 100.000 gallons in one shift per month. Call for photots or video. Come see the plant. Call for details. Seller does not want to keep it in his building and the plant needs to be removed from the property and set up elseware. The original designer and installer will conduct the removal and new location installation for a fee. Contact Us About This Machine Should you have questions. Please contact Joe Wihbey at(860) 484-4449 or email or use the"Ask a Question/ Make an Offer" form below PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments ma
|
|
PLEASE NOTE! SHIPPING IS NOT FREE! WE WILL palletize AND LOAD AT NO EXTRA CHARGE. J. Little Mercer Co. Inc. A-2269 60 GAL stainless steel TANK. Model/serial no. S/N 4138. 1969. Manufacturer PROCESS ENGINEERING& MACHINE. Dimensions 24"X32" FLAT TOP& SLANT BOTTOM. Construction/configuration 316 SS VERTICAL. PSI:Jkt:in ATMOS. 300 DEG.F. Inlets/outlets 1"SO.2-1"TI,TOP MIXER SLOT. General data 3-12" LEGS. HINGED HALF-COVER. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer ... moretakes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
see us at acmeheater.com PH-1500 Ideal for anodizing or taxidermy uses Overall Length: 8.5" 6” Hot Zone) Built In Thermostat: 110f– 195f variable temperature thermostat Material: Nickel Plated Steel Input Voltage: 120 VAC Just takes minutes to heat bucket to temp Suitable For Anodize Sealer. Dyes etc. Includes Side Mounting Bracket For 2-5 Gal Bucket CALL 913-961-9421 for more info or see acmeheater.com
|
|
|
55 gallon drum filtered lids for WVO collection comes with locking ring for secure WVO collection Will fit your standard 55 gallon drums opening is 12"x14" with 3" sides(any of these dimensions can be changed) 3/4" filtration openings(can be made smaller if desired) Comes with locking ring(bolt style or lever lock) made in USA using 16 gauge steel(can be made thicker by request) PLEASE CHECK YOUR BARREL DIAMETER. THESE FIT 23" DIAMETER BARRELS ONLY! Quantity discount available as well as shipping is available(contact me for a shipping quote) Please call 910-538-1220 for any questions before you bid or email Vance at portcitywelding dot com Happy bidding!
|
|
Solid Stainless Steel Heat Exchanger. Solid Stainless Steel Heat Exchanger Unit Biofuel Oil. For you guys running straight veggie oil. WVO or Biodiesel. This 38" by 10" heat exchanger will warm things up pronto and you won't have to worry about it breaking. It came out of a German made semiconductor processing machine and is very robust. Ran deionized water so it is in great shape and there are not residues inside or out. Of course the fittings are the highest of quality, 316 Stainless Steel Swagelok tube fittings for ultimate reliability and sure seals. Swagelok fittings are so tightly machined they are all metal seals- no rubber, no silicone. Use this for an extra radiator or heater core. Cool your rig for free by using the ambient air underneath instead of running that horsepower ... moresucking fan. A nice quality unit that someone can hopefully put to a good use- like using reclaimed fryer oil to drive down the road: This auction is for one heat exchanger. We have 5 identical units. And combine shipping domestic and international. gsrx_vers_308(GS 5.3.7(308) Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
This is a used. Mayhew MP2-500 Coo1, Fluid Purifier, this is powered by an external air source(not supplied) it has an onboard diaphragm pump and regulator, It looks complete, came from Govt auction, operability of filters, pump and regulator unknown, filters are rusty and in poor condition, buyer understands it may need work and or filters. Mayhew Industries primary objective since 1948. Is to be environmentally safe, to assist in the battle against global pollution and to conserve our planet’s natural resources. By using our Particle Fluid Purification Systems& Radar Liquid Coolant Filtration Systems you will gain economical and environmental benefits by turning your waste into wealth. Our products can recycle most petroleum-based liquids into re-usable clean fluids. Products purified ... morewith our systems are just as clean as when first purchased.
|
|
All purchases must be made on eBay. We will not remove items from eBay to sell directly. Free shipping service is only available in the continental United States and only on qualified items. Manufacturer: Shertech Item Title: Cast Iron Pedestal Gear Pump Model Number: PCN5 Description: Sherwood rotary gear pumps have a limited self-priming capability and use the simple principle of two gears rotating in a closely fitted housing. With every revolution of the pump shaft. A definite amount of liquid is drawn into the pump through the suction port. Pumps can be used for spraying, recirculating, cleaning, transfer, etc. Specifications: Rotation: Clockwise/Counterclockwise Port Size: 3/4" Material: Cast Iron Pressure Rating: 125 PSI Free Flow: 20.6 GPM@ 1750 RPM@ 1 1/2 Hp Connection: NPT Shaft: ... more3/4" Keyed List Price: $400.00 Condition: Like new but used. Quantity: 1 Guaranteed No DOA Please use the shipping calculator tab at the top of the page to determine your shipping costs. Please review the"Shipping and Payments" tab above the auction before purchasing. Some notes on Shipping: Free Shipping is for domestic orders only and will be shipped via Fedex SmartPost. Fedex Ground, Fedex Home Delivery or USPS Parcel Post depending on the weight and destination. Items weighing over 120lbs will be palletized and shipped via freight carrier. We get very good rates on freight shipments. Please use the shipping calculator to determine shipping costs. Shipping to a commercial location with loading dock or forklift is always the cheapest option for freight. Rush Delivery is available upon request. Please e-mail for quote(please include zip code) Handling Time is normally only 1 business day. Please use the shipping calculator to determine transit times. Holidays are an exception) Your tracking number will be emailed to you once your order has been shipped. A note to international buyers: FedEx International Economy& Priority shipping services are available for qualified packages worldwide. FedEx Internation
|
|
You are viewing a professionally cleaned and pressure tested Clawson Rock Chemical Tote. We also have several totes manufactured by Bonar Plastics and has a tare weight of 260 lbs this tote is pictures with a black bottom and also comes complete with a Banjo Ball valve and Cap. Unlike a regular IBC tote with thin sidewalls these extremely thick totes can be buried and used as a septic tank. Since the walls are thicker than the IBC totes you do not have to worry about cave in from ground pressure and with some slight modification you have a septic tank. We have a loading dock and forklift for pickup and can arrange shipping. FOB is 46070. We are a professional company and value each of our customers by providing a cost effective solution to your bulk transportation needs. We currently have ... moreseveral New Schutz IBC totes available with a new camlock factory sealed valve and fill port enclosed by a refurbished cage also clean nice and ready to ship. Any questions feel free to call. Email or text. Thanks Shawn 765-278-3384
|
|
removed from service unit has been rinsed but could use a better cleaning. clean the tag states MSC as the manuf. There is not data for this exact model on there web site. unit has 1-1/2" pipe thread ports for inlet and outlet. A 3/4" sediment drain fitting on the bottom and two 1/4" gauge ports for reading the differential pressure accross the filter. this uses standard 10" they are usually a little shorter but they are called 10" filters this model uses 2 stacked in a array of 4(so you need 8 cartridges to fill the housing. and you buy the micron rating of the filter you need. from my limited knowledge of these type unit this should offer 50gpm flow at about 100psi max. I an trying to see if I can get any more data on the unit. shipping weight 40 lbs TERMS: items ... moreare sold AS-IS/ as described. Some items offered with return privilege. Some are sold without please read return policy for specific item/s. Please ask any questions about payment, item condition or any other concerns before bidding, We try and ship promptly within 2-3 days of receiving payment. Tracking number provided upon shipment of goods. We may ship small items via post office at our discretion. We do not ship freight collect on UPS accounts. We do not ship any other method i.e. FedEx etc. No international bidders at this time. PAYMENT: we accept paypal and other forms of payment please inquire. We try and answer all requests and questions in 24hours but do service and travel so we are not always available to get back to you in a few hors depending on schedule. Thanks for looking.
|
|
|
Nice pump. Little dirty on the outside from storage. Its a good working pump. Was tested at our shop. We no longer use this style of pump. All the clamp rings are stainless. All wetted parts are chem resistant plastic for extreme agresseive chemicals or slurries. We believe the pump is made of Kynar. Flanged input and output with 4 bolt flanges. Very nice pump ready to put to work. take a look at the photos. If you have any questions don't be shy!
|
|
|
I have for sale a Davco Unit 234 WVO filter with the plastic wrench inclued it. This fuel processors work great in vegetable oil conversions for any diesel cars, i had it in my Mercedes 300SD for some time and i did a great job filtering the WVO.
|
|
|
This was a valve that had in my dailey driver-I thought it was bad but my problem was a wiring issue. Its working properly and is in good used condition. Shipping is free anywhere in the cont. 48 states.
|
|
|
Diameter: 14in(355mm) length: 44in(1118mm) width: 3.6in(92m) size: 15-gallons(57L) voltage: 120VAC; watts: 700 Economical choice Economical heater is made for metal drums and pails; includes a 6ft(1.8m) long power cord with a standard 3-prong plug(NEMA 5-15) Uses 2 layers of 15mil fiberglass-reinforced silicone rubber with a density of 16.8oz/sq yd(570g/sq m) per layer Patented grounded heating element is uniformily placed to maximize heat distribution and meets NEC 427.23 Adjustable thermostat has a range of 50 to 425 degrees F(10 to 218 degrees C) Band was used twice and is in like new condition. No longer have a need for it. Feel free to ask any questions and check out my other auctions. Happy bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e54e4439c-0x102-
|
|
500 CFM LEYBOLD VACUUM PUMP 29.9 inches of Hg Stock no. P-0069 MODEL TR630.S/N 9260024 MFG. BY LEYBOLD VACUUM PRODUCTS.INC. Construction C/S Inlets/outlets 3" X 2" Motor RELIANCE 20HP.1160 RPM Drive COUPLED DRIVE Electrical data 230/460V 3PH 60HZ Was in working condition when removed from service and has been stored indoors since. SELLING AS IS! Used selling AS IS. We can test motor before shipping. Trochoid pumps belong to the class of so called rotary piston pumps. Which in turn belong to the group of rotary pumps. With rotary piston pumps. The piston’s center of gravity runs along a circular path about the rotational axis(hence rotary piston machines) A rotary piston pump can–in contrast to the rotary plunger pump–be completely balanced dynamically. This offers the advantage that ... morelarger pumps can operate without vibration so that they can be installed without needing foundations. Moreover. Such pumps may be operated at higher speed, compared to rotary plunger pumps. The volume of the pumping chamber with respect to the volume of the entire pump–the so called specific volume–is. In the case of trochoid pumps, approximately twice of that of rotary plunger pumps. Larger rotary plunger pumps run at speeds of 500 rpm. The trochoid pump may run at 1000 rpm and this applies also to larger designs. It is thus about four times smaller compared to a rotary plunger pump having the same pumping speed and runs without producing any vibrations. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is.
|
|
|
Working centrifugal filter model no. 181-5300. Liquidating WVO processing facility. Looks dirty and used. It is: Save money, BIN is 1/2 of MSRP new. Make an offer! Posted with 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e683d1ab8-0xf5-
|
|
|
Listing is for a 2600 gallon cone bottom tank on a steel frame. This was used in a WVO environment and still contains traces of oils. It is wrapped in 3" poly-foam insulation. It has a 3" drain and top fill port. Included inside is 700 ft. of 3" diameter Pex heating coil. Over $3500.00 Invested. Save here! MAKE AN OFFER! THIS ITEM IS LISTED FOR PICKUP. Fulton NY 13069 SHIPPING CAN BE ARRANGED BY 3rd PARTY or BUYER. AT BUYERS EXPENSE. Thank you for viewing the listing Have a great day!
|
|
Ebay Listing Form- We have 5000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Acra Electric TRX-55 55-gallon Thermostatically-Controlled Drum Heater FEATURES: Model TRX-55. Heat range 200 to 400 degrees, Manufacted by Acra, Heats to 500 so looks like 200 to 400 degree F version. 1920-960-480 Watt power settings. 120V input, 11 lbs. 6.25" x 27.5 x 24" CONDITION: Tested. Heats well. Some storage and handling rash. CA Inventory# 5501 NOTES: packing& shipping is very costly. used& parts- don't buy if. understand item condition. you can make an offer. international is super costly& slow. combined shipping. anything electrical-more restrictions. can't schedule shipping without. delivery takes time. query& purchase ... moreresponse time. we make a mistake now& then. LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, Additional similar or related items may be available listed separately. This Might Be Just What You Need For Your Drum-Heating Application. If you want or really need what you see. Do the"Buy-It-Now" before someone else locks you out of it! Terms And Conditions Are As Follows: The seller may refuse to sell to. Cancel the bid of, or terminate a transaction with any party the seller comes
|
|
|
2008 Model. In good working order. Currently in use. Complete with all accessories.and instructions. We also have numerous 250 gallon totes to sell for $50 each.
|
|
This is an excellent working centerfuge. Named Absolute Centerfuge, made in the USA! We bought this to clean our waste veggie oil to run in our diesel vehicles. We used the hanging bags for filtration before the purchase of this equipment. This centerfuge is the answer to the cleanest oil possible. Must be heated before you run in the centerfuge. We no longer use waste veggie oil due to health issues. This centerfuge has been cleaned and is in excellent working condition, there might still be some waste oil on the outside of the unit. The oil must be preheated before it goes into the centerfuge, and the unit is a non automated feed in it, my husband wanted to control the amount and speed of the oil in the centerfuge, so the dirt would settle to the bottom and not clog the basket. If you have ... moreany questions please just e-mail me!We purchased the unit for over $1200.00. I will be listing a filling unit that was used with this unit. PLEASE READ THE FOLLOWING! COMES FROM A NONSMOKING HOME! ● As per Ebay rules. I accept only PayPal. ● ● If you are paying with an E-Check through PayPal. Please know that your item will NOT ship until the payment has cleared. ● ● Payment is expected within 3 days after the auction has ended. ALL NON-Paying Bidders will be reported to Ebay. ● ● Shipping to Hawaii and Alaska please add 2 dollars for S&H ● ● Worldwide shipping is NO LONGER available. ● ● I ship ONLY to your confirmed PayPal address. Items will no longer be sent to an address other than the one that is registered with PayPal. ● ● Shipping and handling includes delivery confirmation for ALL U.S. addresses. ● ● Please remember there is more to shipping than just the actual postage. Handling involves bubble mailers. Bubble wrap, packaging tape, printer ink, printer paper and gas money to the post office. ● ● This item will ship via the US Post Office. ● ● If you have any questions. Please email me. ● Happy Bidding!
|
|
|
Custom made aluminum fuel tank designed for WVO two tank system. Has coolant and fuel fitting attachments on the bottom. Coolant has a welded in loop to ensure good heat no other heating element is needed for the tank. 43" wide 15" deep 16" tall. Fits real good in a 300D came out of a 1985. Also fits in a 1982-1991 S class. Does not fit in a 1996 to 1999 E class I tried it. The opening was small. It is designed so that the spare tire can be removed with the tank still in the car and full. Hold a real world 26 gallons. All the way to the top is closer to 30 gallons. Call Me if you have Questions. 954 266 9303. If you live in South Florida I will bring it to you. We can talk about shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ebb2bc06f-0x104-
|
|
|
Great pump for Veggie oil. Or waste oil pumping! It only has a few hours total run time, practically new. I'm getting out of the oil business as I'm going to fire my boiler by wood waste instead of oil. Has 1 1/4 inch hose barbs. I can't remember the GPM on this but it can empty a 55gal drum in a few minutes! This is a beast of a pump. There is no filter screen that comes with this. The pictures look like the pump has high hours with the scrapes and such but I am the original owner can can vouch for the low hours! =) I had it mounted to a dolly hence the scrapes on the motor mount, The pump works flawlessly, wired for 110V. Simply plug it in and throw the switch and your good to go! Pump all boxed up weighs in at 55 LBS. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13ec7b72964-0xf5-
|
|
|
This tank was purchased for a WVO project. But I never used it. Dimensions as shown. Thanks for looking. Seller works two jobs, maximum time to pack and ship will be 5 business days.
|
|
Make 40 gallons per batch from new or used vegetable oil. Save big at the pumps This is a used system in working order. Saves you the time and money tracking down all the needed components. Buying them and figuring out how to assemble. We used it for a couple years making bio for the tractor. Dozer, backhoe and truck. A lot went into the dozer when we were building the pond but also in the pick which really quieted down the clatter of the 7.3. It smells a lot better and we usually ran a 50-50 mixture without any problems. Run it in the pickup, Case 580B backhoe, T-8 Dozer, 25 hp compact tractor and even the diesel generator. Guessing we made 400-500 gallons with the system. Ok so what do you get with this system. Basically everything you need to start making bio diesel as soon as you clean ... moreout a spot in the garage for it. The processor is the most expensive and time consuming part to purchase and put together but it is all assembled and ready to go. You also get a spare processing mixture pump, The timer and outlet set up. One course Golden rod filter, One very fine filter for the finished product which is a Filtroil BU-30 which is over $600 new. One settling tank. 55 gal. for incoming used fryer oil, then goes to the tank below, One 55 gallon heat tank with 220 volt band heater and insulated and drains on the bottom to fill the processor and the other to drain out any water. Plus three more drums with used oil. Various measuring cups, and droppers. One fine mister for the beginning of the washing. One hand pump to get the fuel out of the finished 55 gallon drum. 150 gallon of used fryer oil and the other two ingredients for the process to get a few batches made The only thing you should need is a measuring scale for weighing lye and small red phenol bottle for the titration test. You will also need a trailer to haul all of this. And a way to get full 55 gallon drums of the trailer or truck. Or make a couple trips. The process is simple and only takes a little time each day. I usually make 40 gallons a week an
|
|
|
Large fuel tank for 116 body like a 300sd 450 Maybe will fit a 123 body have not tried it may have to adjust a few things? 45 to 50 gal. replaces stock tank doubles your fuel carrying. Has stock sender could be used for wvo or veggie oil have to ad a heater if you live in a climate where it get really cold like below 40F. great tank for long trips no fill ups! anyway take a look at the photo email any questions we have lot of good used Mercedes parts
|
|
|
This is a used racor 1000fg fuel filter which came from a generator replacement.It comes with a brand new drain plug asembly. I had to remove the filter cartridge because of the diesel smell. It is in perfect working condition. Posted with the 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13eda3f979e-0x107-
|
|
I have for sale an Extreme Biodiesel mini refinery that cost me well over $20.000; also included are containers both 50 gallon drums and 300 gallon polyethylene containers. Also, a larger fiberglass container that holds 500 gallons. I have many more materials and miscellaneous items that go with the system when sold. All components are in like new used condition and housed in a ventilated building. For more information please call(352) 302-5870. Below is the information from Extremebiodiesel's website: The Mini Refinery is the only waterless system available on the market that can make 600 gallons of quality biodiesel per day. Designed to run continuously. The Mini Refinery will meet all of your biodiesel needs.600 gallons/day system $19,999 The Extreme Biodiesel Mini Refinery is extremely ... moreunique in the world of Biodiesel. This waterless system is the only system on the market that can make 600 gallons per day utilizing the best technology known in the industry—and at minimal cost. The Mini Refinery is built to be used continuously. Every day, and does not require rest. We construct this refinery using only the finest materials available. The Mini Refinery includes a heating system that is an electric pass-through heater and a 300 gallon tank and filtration system. This way you know before processing that your oil is free of large debris. You can also choose any voltage configuration. We now offer a new optional waste oil heater that runs on vegetable oil. As well as, biodiesel. Not only will this reduce your processing cost, but it will also earn you money. You may qualify for state and federal tax credits for burning waste oil. Check with your local tax authority. The filtration unit on the refinery will run 3000 gallons before requiring a methanol rinse. And will last 12,000 to 14,000 gallons before needing to recharge the system. All of this is wrapped into one tidy package that only takes about 25 feet x 10 feet of space. This is truly an incredible mini refinery and at only $19.999, it is by far the mos
|
|
|
Waste oil tote I think it's 250 gallon not sure. It can be cleaned out for other uses but it was used for waste oil. Local pickup. Can't deliver. I am selling locally so I may end auction early if I sale. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ee1f385d1-0xf0-
|
|
Dieselcraft OC-50 Cleaning Rate: 100 Gallons per Hour Measures 13” wide by 42” tall and 16” deep to stand next to a 55 gallon drum. Shipping weight: 85 pounds Rotor holding capacity: 20 oz of contamination. Pump and Motor Features: 100 PSI maximum continuous pressure. All-bronze construction, bronze gears with stainless steel shafts and mechanical seal. Motor is 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, automatic thermal overload protection. Frame is a 12 gage steel fully formed structure with polyester powder coating. Used this unit for one season processed over 1000 gallons of wast oil for are truck.sold are diesel truck this year. Also can be used for heating fuel. I will also give the buyer a extra rotor new $125 witch holds ... more20oz of waste. Unit brakes down for easy shipping Go to the you tube link to see unit in operation http:www.youtube.com/watch?v=ZnEYyAnlck8&sns=em Posted with
|
|
|
Pollack Fuel Valve model 42-159 Used but nice condition One side has 2 inlets or outlet and the other side has 4 Max psi is 65 Comes with the proper electrical connection you just have to attach you wires. Has a mounting bracket(see last pic) Posted with
|
|
I bought this off eBay from PA Biodiesel Supply a few months ago for 150$. This has been used on my filtering system for wvo that I was running in my car. It works great. Just run the oil from one 55 gallon drum to the other to make it clean and get out water ect in just one hour. I tried my best to clean it but if you have ever dealt with this stuff it is messy and is hard to clean. Specs- The flow rate capacity of the wvo centrifuge is.93 GPM or 55 gallons per hour. The centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of WVO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity ... moreat 7500 RPM. You need to purchase a 1/3HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration system with this unit. Posted with
|
|
|
Used but in great condition. Model OC-20 Centrifuge Flow rate.93 GPM or 55 gallons per hour The Centrifuge can handle maximum particle size of 500 Micron at the input. The Centrifuge nozzles are.045 inches/ 1.15mm. However. For the safety of the pump, it is best if a suction filter of 150 micron is used. Measures 4” Diameter by 6” Tall Supplied Universal mounting plate is 3” wide x 4” long with a flange mount with two ½ holes and a 1” NPT female coupling for affixing the return line. Rotor holding capacity: 10.5 oz of contamination. Maximum operating pressure 90 PSI.
|
|
|
This is a PA biodiesel kit. It is fully assembled and working. There a fe gallons of WVO/WMO left in the unit. I am getting out of WVO for now. I will also throw in 4 steel Jerry cans and a barrel hand pump that I use to collect WVO. http:pabiodieselsupply.com/shop/wvo-centrifuge-oil-centrifuge-filtration-unit-closed-drum/ Local pickup or will deliver for $.57 a loaded mile up to 200 miles. Delivery could take a week to organize. Posted with
|
|
This 55-gallon(208L) 120V DHCS Series standard heavy duty heater is made for metal drums and pails. The patented 360° grounded multi-stranded heating element is laminated between two extra thick layers of 20mil fiberglass-reinforced silicone rubber for excellent strength and durability. The heating element is uniformily placed to maximize heat distribution and meets NEC 427.23. It is moisture and chemical resistant, with a spring closure that can be expanded 3in(76mm) The adjustable thermostat has a range of 50 to 425°F(10 to 218°C) for metal drums or pails. The maximum exposure temperature on the heating surface is 450°F(232°C) Includes a 6ft(1.8m) long power cord with a standard 3-prong plug(NEMA 5-15) Grounded. Material: 2-Layer Fiberglass Reinforced Silicone Rubber. ... moreVoltage: 120VAC. Watts: 1200. Thermostat Temperature: 50 To 425°F(10 To 218°C) Maximum Exposure Temperature On Heating Surface: 450°F(232°C) Dielectric Strength: 2000V. Diameter: 22.3in(565mm) Length: 70in(1778mm) Width: 4in(102m) Size: 55-Gallons(208L) BriskHeat# DHCS15. This item is lightly used but still in excellent physical and working condition. So. This not quite what you’re looking for? Be sure to We strive for 5-Star Service. So please contact us regarding any problems BEFORE filing any claims or leaving unfavorable DSR’s or feedback. We will do our best to make you happy. Payment required within 24 hours of auction end. If you need more time to pay. Contact me prior to bidding. Shipping quote is for shipping to the 48 contiguous United States. Shipping to Alaska. Hawaii, and international will cost more. Please contact me for a shipping quote. We insure all packages for purchase price and are not able to claim lesser values on items for shipping purposes. I only ship to Paypal confirmed addresses.
|
|
I have a professional/commercial-grade expeller oil seed press for sale. I purchased the Komet CA 59G expeller press from Oekotec IBG-Monforts. Germany) in December 2004 and began commercial pressing of organic sesame seed and sunflower seed oils in June 2005. I sold these organic seed oils at the Portland Farmer's Market in Portland, Oregon from 2005 through 2007 but since that time, I have done only personal oil pressings. And because I am currently back in school working on another career, I have decided not to press any more oil. Some details- Single phase. 220V electric motor(1.5 hp) Frictionless gear drive; speed of press screw 20 to 100 rpm*Press screw model R-6 with one set of nozzles sizes 4. 5, 6, 8, and 10 mm*Brass ring heater*Acryl oil catcher*Acryl hopper The Komet CA 59G ... moreplus all of the additional and supplemental equipment needed to begin a small-scale commercial operation is included in this sale. Supplemental equipment includes- One stainless steel table*Two stainless steel collection vessels*One stainless steel funnel*One stainless steel strainer I would be happy to share my pressing experience as well. Note that this press is probably NOT the best choice for biodiesel production because it is designed for high-quality. Food-grade seed oil production. Unfortunately, eBay does not have another category that fits this piece of equipment. Also, I am not really prepared to ship these items; you should plan on picking them up in Portland, OR. The cost of shipping would be astronomical(the press itself weighs over 200 lbs(110 kg)
|
|
|
1 used Waste Vegetable Oil Centrifuge. I bought this from PA biodiesel. It is a model PA-55. I used it less than 10 hrs, constructed a WVO filter system but decided not to continue with the project. This unit sells on PA Biodiesels web site for $136.
|
|
|
Used immersion heater. I used this in my oil filtration set up, it easily heated 10 gallons of oil to 400+ degrees in less than 1 hour. No thermostat provided. Used
|
|
|
Used silicone heater. I bought this used off of ebay and never used it, these sell for over $120 on PA Biodiesel's web site. This one does not include a thermostat, you will need your own thermostat for that.
|
|
|
A must for heating WVO before filtering. 1000 watts heats very quickly. Used very little. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fa1002b11-0xfd-
|
|
Hello There Fellow Ebayer Here We Have a Babington Airtronic Burner Condition: This Burner is Used. It was Purchased from The Military as Operational. Unfortunately I Do Not Know How to Test. We Do Accept RETURNS! FEATURES High combustion efficiency at all firing rates Reliable performance over extended periods(e.g. 5000 hours) Single switch on/off operation Operational simplicity. Rapid deployment and low power consumption Variable firing rates with a single dial and no parts change Operates without smoke. Odor or carbon monoxide from start-up to shutdown Instantaneous ignition with low energy spark Multi-fuel capability[ DF-1. DF-2(diesel) DF-M, JP-5, JP-8 and Kerosene] Tolerance to fuel contaminated with water and dirt High combustion efficiency regardless of fuel viscosity Low power consumption ... moreNo preheat requirements even at ambient temperatures as low as-40°F Lightweight and compact design Compatible with virtually any type of heat exchanger Suitable for use with off-road military combat and support vehicles Tolerance to tilt. Shock, and vibration Modular design promotes simple maintenance procedures Designed to satisfy the highest military and commercial safety standards Reliable performance from-55°F to +140°F Field tested by the U.S. Army at 53 degrees below zero. Using Winter-grade diesel fuel; Lit reliably even after 24-hour cold soak Manufacturer- Website Product Page This is Just a Video That I Have Found On YouTube Of This Identical Burner in Action! Shipping Flat Fee $50 w/Tracking# Ships Out Same Day This is A Perfect Opportunity for Someone To Get a Great Ebay Deal! Any Questions At All Please Do Not Hesitate To Ask Thank You Very Much If You Are Not Completely Satisfied with Your Purchase Just Return For A Full& Immediate Refund! Returns Accepted! Hassle Free) Actual Pictures! These are Actual Pictures of The Burner& Condition You Will Receive
|
|
|
VGC barrel dollie. Local pickup only, no shipping. 314-315-1061
|
|
|
AS IS* Used barrel heater*NEMA 5-20P plug* 1920W. 120V. Thermostatically-controlled(knob missing. Still works) Slightly dirty/corroded.
|
|
one 40 gal tank(needs to be finished with heated pick up fule line) two wvo valves 12v with viton seals wvo filter head cast iron 15 feet of 1/2 inch Aluminum fuel line. These are Parts I had left from some WVO installs. This is most of the part you will need to convert your Mercedes or VW diesel or older diesel truck to run on veggie oil. You will need a few more parts however this is most of them anyway you can make a heated wvo filter with the fuel line and a heated pick up tube for the tank if you need to. good deal for someone e mail me if you have any questions Have lots of good diesel parts in stock and a few more wvo parts on hand here is some info on the valves The 3-way vlaves are high quality 3 way solenoid valves for switching between 2 fuel supplies- excellent for straight vegetable ... moreoil(SVO) conversions(using waste vegetable oil- WVO) These are heavy duty. Reliable valves that have viton seals. They have 3 x 1/2" female NPT ports. They have a small LED that illuminates when energized(typically energized = wvo, default state = diesel) Biodiesel compatible with Viton seals. Rated for temperatures up to 220 F and pressures up to 10 bar. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13fd24c1536-0xfd-
|
|
|
Selling my BioPro 190 Biodiesel Processor. These machines are fully automated and produce quality fuel. I have produced almost 6000 gallons with this processor. So it has paid for itself already. Since owning the machine. I have replaced both heaters, the methoxide pump and the Directlogic controller and card. The machine works well and will come with the fuel pump as well. I have put a brand new motor on the fuel pump also. I will ship this by freight anywhere in the lower 48 states. I'll cover anything over $400 for freight costs. I make several cross country trips a year. So if you are somewhere close to my route I will be glad to stop by and help you get started if needed. Local pickup is also an option. I have some chemicals available if you pick it up locally. Thanks for looking.
|
|
|
Had a pair of valve left over from an install anyway take a look at the photo's 1/2 inch npt 3 port valves 12 volt. Used same valves on my other rig worked well for years here is some more info on the wvo valves They have a small LED that illuminates when energized( energized = wvo. Default state = diesel) Biodiesel compatible with Viton seals. Rated for temperatures up to 220 F and pressures up to 10 bar.
|
|
This biodiesel processing system was constructed in 2008 and is in 100% working order. This system can produce biodiesel from various feedstocks. Including but notlimited to: used cooking oil, virgin vegetable oils, fish oil, lard, tallow, and allother animal fats. It can handle high FFA feedstocks as well. Using acid/base processing, and frequently processes feedstocks with 10% or more FFA. Reaction tanks are constructed of both stainless steel(304) and carbon steel. Total capacity of reactors is 2,700 gallons, and batch processing time is 48 hours. With effective batch management the facility can be optimized for 500,000 gallons per year, or more. The facility is located in beautiful Costa Rica and the price of the system is FOB Costa Rica. It can be crated and loaded into two full size ... morecontainers for shipment worldwide. System footprint is 2.000 square feet. All processing systems are semi-automated and include agitation systems. Agitation systems are powered by electric motors and gearboxes or pneumatic motors. Complete systems include: Industrial Filtration Systems Pre-Heat and/or reaction tank: 550 gal Centrifuge dewatering and filtering tank: 300 gallon 3 biodiesel reactor tanks(1 stainless 550 gal. 1 carbon steel 550 gal, 1 carbon steel 1,000 gal) Methanol distillation and recovery system(98%99% purity) tank. Agitation, reflux column, industrial heat exchangers, chiller with temp. control, compressor Production equipment for natural cosmetics using the glycerin by-product as feedstock More detailed information here: http:www.dieselloverde.com/facility.php
|
|
You are looking at a used"Hot Fox" fuel heater/coolant heat exchanger manufactured by Arctic Fox. This unit is designed for 10-12" deep diesel tanks. However with a longer 1/2" NPT pickup extension it will fit into deeper tanks. Made in USA. Stainless steel, all welded construction. The fuel heater being auctioned is the one pictured- what you see is what you get(tape measure not included of course) Condition: Used. Date of mfg unknown. Pressure tested to 25 psi- no leaks. Fully serviceable. Cosmetic flaws: one very small ding in main tube(see picture) minor scratches. Dimensions: 1/2" FPT Fuel fittings(outlet has a 3/8" flare adapter. Inlet has a brass extension) 1/2" FPT coolant fittings. 1 1/3" profile above flange. Tube drop below bottom of flange ... moreis without extension is 9" The installed brass extension has been cut to 3/4" Unit came from a 10" deep tank) 1 1/2" diameter tube. 3" diameter 5 hole pattern fits in a standard diesel tank sending unit location. Manufacturer's specifications here: Shipping details: North American shipping only- US and Canada. Also available for local pickup(Northern Atlanta Metropolitan area. GA) This heater fits in a USPS 12x12x5 1/2" box. This unit retails for over $220. This is a no reserve auction with a low starting bid. Any questions? Use the"ask seller" feature or call directly at(678) 967-9339 from 9am to 9pm EST and I will answer your inquiry as soon as possible.
|
|
GREENFUELS FUELMATIC BIODIESEL PROCESSOR THIS MACHINE IS CAPABLE OF MAKING UPTO 8-10000 LITRES PER DAY. THE MACHINE IS SEMI AUTOMATED AND VERY SIMPLE TO USE. CHEMICALS ARE INJECTED AUTOMATICALLY. GLYCERINE IS ALSO PUMPED AWAY AUTOMATICALLY. THIS MACHINE HAS 2 X RESIN TOWERS THAT POLISH THE BIODIESEL WITHOUT THE NEED FOR WATER WASHING. How the FuelMatic works The feedstock is heated. Then measured into the reaction vessels where methanol and methylate are accurately injected into the flow, Once the reaction is complete the mixture of crude biodiesel and crude glycerine is channelled through to the GSX separation unit where the two products are cleanly separated and the glycerine is discharged to storage. The crude biodiesel then passes through our purification process where any impurities are ... moreremoved through an ion exchange process. Finally the residual methanol is recovered for reuse and the resulting biodiesel is automatically discharged to site storage. For commercial use. Our highest selling processor, the 20,000 litre FuelMatic, is designed as a flexible, shrink-wrapped product, allowing biodiesel producers to go to market within 3 months, many times faster than previous generations of biodiesel technology. It can be housed in a 40-foot container, run in a major city or on a small, community scale in remote locations using readily available, locally grown or waste feedstock with the resulting fuel used for transport or to generate power. Key Benefits High product yields- 1.01 litres biodiesel per litre input oil, Low energy demand- the plant system uses less than 50kWh per ton. Commercial grade fuel- EU EN:14214& US ASTM-6751 standard, High flexibility- a variety of input oils(feedstocks) can be processed. Minimal waste and no waste water, PLEASE NOTE ITEM IS LOCATED IN THE UNITED KINGDOM. WE CAN SHIP THIS MACHINE IN A CONTAINER WORLDWIDE. SHIPPING WILL BE BASED ON COST.
|
|
Every thing you need to start your own business! This is a LARGE commercial sized bio-diesel processing system. 1 or 2 batches can be done at a time. producing about 400 gallons of finished product per batch. 4 batches can be made a day if running full speed = 1.600 gallons of finished product a day if desired. All tanks are HDPE plastic- FDA approved) 2- 1000gal 45 degree cone bottom- finish product tanks with steel stands in containment unit 1- 1000gal 45 degree cone bottom- mixer with steel stand in containment unit 2- 500gal 45 degree cone bottom- batch tanks with steel stand 4- 500gal 45 degree cone bottom- settle tanks with steel stand 1- 500gal 45 degree cone bottom- dry wash with steel stand 1- 1000gal bulk container. 6- jet pumps. 1- Honda Water Pump Over $15.000 in tanks, stands ... moreand, containment's alone. These are NOT water tanks. They are rated for oil. This comes with everything you need to be fully operational. Including motors. Pumps, valves, piping, gauges, fittings, furnace All tanks are still in like new condition. Only used 3 or 4 times. System located in Newbury. MA Willing to load, and deliver. for an extra charge. SMALLER SYSTEMS SELL FOR UPWARDS OF $50.000! A simliar system called B-500 Continuous Batch Commercial Biodiesel Plant Sells for $50.00 0. You can see it on google. Please contact for more information. And to set up a time to check it out. Here is a list of the more common feedstock that can be used to make bio-diesel: Waste vegetable oil(WVO) Soybean oil Jatropha oil sunflower oil Animal fat Chinese tallow Coconut oil Rapeseed oil Linseed oil Palm seed oil Canola oil Algae oil The list goes on and on. PAYMENT OPTIONS. MONEY ORDER OR CASHIERS CHECK. This a large system. We would be happy to help disassemble free of charge. We would also be willing to load and transport this system for a delivery charge. We require the payment for this item to be made using the following formats only: Money Order Cashiers Check Please no PayPal on this large item. E bay requires us to
|
|
|
Heat exchanger used to chill glycol down to-20 deg F Built to use freon to chill. Call me if you have any questions. Ken 209-648-5424
|
|
|
SCOTT ARDUX FUEL PUMP 1-1/2"WITH ALUM. QUICK COUPLINGS BALDOR EXPLOSION PROOF 1 HP EXPLOSION PROOF MOTOR 25-60 GPM UNUSED MILITARY SURPLUS PLEASE VISIT OUR EBAY STORE: FLOW DADDY NEW. USED, SURPLUS, REBUILT(full year warranty) EQUIPMENT FOR PETROCHEMICAL HANDLING pumps. Meters, strainers, valves, mixers, etc. up to 12in. PAYMENT We accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. We reserve the right to request certified funds only for large items.
|
|
|
Here are the specs: Northern Tool Item# 109502. Item Weight: 7.00 lb(s) Product Information: The Zee Line lever hand pump is designed to pump diesel fuel or up to 40 weight oil from up to 55-gallon drums. Dispenses approx. 1 pint per stroke. Oz. Per Stroke: 16. Fits 15 to 55 gallon drums with 2in. bung opening Recommended for diesel fuel or oil up to 40 weight Die-cast zinc piston with 2 chemically resistant brass rings. Along with adjustable stroke lever; Buna N seals Telescoping PVC tube assembly(NOT INCLUDED. Cheap, crappy, doesn't work anyways) Curved discharge w/garden hose threads, $10 shipping to lower 48 states. No international sales. No returns. Good luck bidding. Thanks.
|
|
Up for auction is a complete Golden Fuel Systems WVO/SVO kit. This is a used system that I am currently running in my 1996 Ford F250 7.3L Diesel. This system was over $3000.00 new. I have been running this system for a little over a year. I have used it during both summer and winter. It has worked great for me during all seasons, yes even in extremely cold weather! Included in the kit are the following components. 1. 60 Gallon Trekker Tank with coolant heating system. less than a year old. 2. 900 Series Racor Filter with heating element. 3. All vegetable. Diesel and coolant lines inside one heavy duty sheath. This helps with ease of running the lines and keeps the veggie oil warm while it travels from tank to engine. 4. All electrical connections pre wired on electrical block. 5. Three valve ... morerail that handles the delivery and switching from veggie to diesel and purging of the system. This also comes pre plumbed with all the hoses. 6.In cab dash switch for switching from diesel to veggie and purging of the system. 7. Vacuum Gauge and Fuel Gauge. 8. I am also throwing in a 55 gallon barrel drum heater. I am currently running the system ion my truck and would be happy to send a video of it operating. Since it is used. There may need to be some hose fittings, hose clamps and small pieces to be purchased. Anything I needed after my purchase I was able to get from a local auto parts or Menards type store. I also purchased this kit for a Mercedes I was going to run it with. But decided on the Ford instead. This kit would have worked with either car minus the 60 gallon veggie tank. Golden Fuel Systems has great install instructions on their website and great info on the system. I highly suggest any interested buyer to do some homework on their site. This is a great system and along with a friend had it installed and running in a couple days. Since this is s used system I will be selling it( AS IS) I will not accept any returns or give any refunds. It's running fine in my truck now and I will uninstall it upon sale,
|
|
J. Little Mercer Co. Inc. Data for equipment P-2109 1 inch MAGNETIC DRIVE PUMP Model/serial no. 13063P-1. TC 18 Manufacturer Kontro/ Sundyne Dimensions 1" i/o Construction/configuration 316 stainless STEEL Inlets/outlets 5 3/8 input shaft. General data 108 ft head. 20 gpm. Seal-less Motor 7.5 hp. 3600 rpm Electrical data 3 ph. 230/460 volt, 20 a Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available ... morelocally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
I used this to filter grease for my WVO/SVO/Veggie Oil car. Works great and can handle a lot of volume but naturally depends on the quality of the source oil. Oil temperature, and pump capabilities. You will need to order a new o-ring for this which run from $5-$12 depending on the material. This comes with the X100B(bag) vessel. Differential pressure gauge seen near the top of the vessel, the pressure gauge in the lid, and the steel leg kit. Here is information from the brochure: X100B- Bag Design Polypropylene Body. Buna O-Ring Port Sizes: 2" FNPT Side In. Bottom Out Nominal Flow: 80 GPM Maximum Pressure: 90 PSI The Right Choice for Many Applications and for Many Reasons FSI’s X100 Convertible Filter Housing provides an excellent. Low-cost alternative to other types of filter housings. ... moreFSI X100 is Lightweight and Chemical-Resistant Manufactured from polypropylene with a UV inhibitor for all-weather durability. X100 housings are strong, lightweight and economical.Resistant to a wide range of chemicals for a wide range of industrialapplications, the X100 will precisely fit your particular needs. Easy Cleaning is Another X100 Trademark FSI engineered the X100 convertible filter housing with a“clean wall” design. A smooth interior surface that allows faster, easier manual cleaning or in-place flushing. The X100 Filter Housing is Convertible Designed to accept either a bag filter or a cartridge filter. The FSI X100 filter housing allows you to choose the filter media and construction to precisely fit your filtering needs. No Sump Disassembly Required for Filter Changes Because the X100 is top loaded with a specially developed threaded lid and gasket. Filter elements can be changed without disassembling the sump and without additional tools for tightening. With the X100, changing the filter requires much less time than with many other types of filter housings Positive Sealing of Both Bag and Cartridge Filters The X100 Convertible Filter Housing. Along with the Polyloc® seal point of our X01 filter bags and
|
|
|
Two Greasecar solenoids used on my veggie oil car to convert between vegetable oil and diesel. Worked great while in use but I am now building a hot rod and have no further use for them. Please email with questions. As mentioned. They worked fine. Also, check my other auctions as I have a huge canister filter, filter bags and an arctic hot fox tank heater?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-1403cd07a65-0xf0-
|
|
|
Centrifuge Controller Clearance item Used trade in for deluxe controller. Used Old Style Economy Centrifuge Controller. Complete. Universal Voltage 110V to 240 V- plug in and go. No selection necessary. Two Circuits- one motor circuit and one resistive load circuit(heater) Cycles Centrifuge and heater to dump sludge. Free Shipping*May be traded in later for credit towards Deluxe Controller(less eBay fees and shipping cost) 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14055cb50f2-0x108-
|
|
|
Centrifuge Bowl and Spindle Clearance Item Old style US Filtermaxx centrifuge bowl. Complete. Used Bowl- trade in for new style. New Spindle Ready to install. Free shipping. Used Bowl may have some oily internal surfaces
|
|
Hey Guys, I'm selling my Greasecar system. Anyone familiar with the waste vegetable oil for fuel will know about Greasecar systems. They have been in this business quite a while and have one of the better systems on the market. I had this installed in a diesel Passat. It's ideally suited for the Mercedes 300D. VW golf, Jetta Diesels as well. This package I just pulled from the car and had very little use. My car is a 2005 with the Pumpe Duse injectors. After I installed I read that it wasn't suited for his engine and I wouldn't recommend running veg oil in it. S at most I ran a couple of tanks of oil. This package has the wiring intact as I just pulled it.some of the fuel hoses are attached. Also an extra auxiliary fuel pump. The copper heat exchanger. The stainless filter ... morehead and included is a Brand new Filter. Plus a Veg Therm inline electric fuel heater. I also have the stainless tank and 3 gauges. Including digital temp gauge, vacuum gauge, fuel gauge that I may list separately. I'm listing all pictured above. If you're interested in the whole package make me an offer. Posted with
|
|
|
I built this from a processor kit and wash tank kit purchased from Utah Biodiesel Supply. I have made ASTM quality bio for several years with this setup. We are selling our diesel car and I no longer need to make bio. This utilizes a 65 gallon water heater so that I can make 45 gallon batches. Heating element was replaced last month. Pump was replaced 6 months ago. Processor and wash tank are mounted on a rolling cart for easy movement to clean behind it or move around. With"gas station" nozzle you can pump filtered dried biodiesel direct from the wash tank to your car. I will provide to the buyer any remaining methanol. KOH, and WVO. Local pickup only or may be able to help transport in Georgia
|
|
|
This works great and has a very strong magnet. Thanks for your interest
|
|
Simple Centrifuge" Made in the USA Clean waste vegetable oil(WVO) Bio diesel, lube oils, and even hydraulic oil in your garage. Purchased this unit just over a year ago. I tried many different filtering methods but found this unit was the most thorough and economical to use. I paid just over $1.500 for the unit. You can visit the company website SimpleCentrifuge to view the unit in action. I no longer make biodiesel and am liquidating all my equipment. The Centrifuge works perfectly. If you are in the market for a good quality Centrifuge. You can save hundreds of dollars by purchasing this unit. FREE SHIPPING! Bid with confidence. Check my 100% feedback. From the Simple Centrifuge website: How much does it cost to run? The machine is modestly sized. Large enough to clean hundreds of gallons ... moreper week yet small enough that it is inexpensive to run. Just pennies per day. How much product can I run per hour? This depends on your product. Heated oils can be processed at a rate of over 20 gallons per hour. The slower you go the finer the particulate it will capture. What kinds of products can I run through the machine? Successfully run WVO. Lube oils and hydraulic oil. Most any liquid can be processed. What kind of power requirements does the machine need? Single phase 110v. Can I set this machine up in my garage? You bet. The machine is small enough and quiet enough to put anyplace near for feed stock. How well does it clean the product? Easily down to 1 micron. Unlike filters it can capture smaller particulate based on its weight. Not size, so not only does it capture small carbons but it can capture water. What is the maintenance? The machine should be wiped down between usages.
|
|
|
Empty can of the now discontinued lewis red devil lye
|
|
|
US Filtermaxx 3000G Centrifuge Manufacturer Reman 3000 G Classic Type 60% New Parts. Low hours on motor. Some parts may have residual oil on them. Free Shipping 904 334 2838
|
|
|
4.627 Gallon Nexus corrosion barrier. Previously used to hold purified water. Buyer will be responsible to pick up/transport the item; please coordinate pick up with us after purchase, k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-140ec227910-0xec-
|
|
|
Large Frybrid 12 volt electric fuel filter blanket heater. Used works great. Posted with
|
|
Up for sale is my WVO/Biodiesel process supplied. I have a 200 PSI bag filter housing(pressure vessel) A 1/3 HP pump from Redline pump and a 400⁰F 55 gallon barrel band heater. I purchased this equipment new and used it to filter and dewater WVO that I used for my 2-3 hour daily commute. I used to commute from Salem Oregon to Portland Oregon every day- a distance of 100 to 110 miles that took me anywhere from 1 to 1.5 hours one way. I got the WVO from our café at work, took it home and put it in a 55 gallon drum where I heated it for 1-2 days with the band heater. Once heated to ~100 degrees, I bled the water out of the mixture, then filtered the WVO through a 5 micron 4"x8" sock filter into clean containers. What came out was a nice clear amber color(looked like Light Beer) ... moreand I used that in my VW auxiliary heated fuel tank. I would start the car on Diesel, warm it up for a few miles, then switch over to WVO for the majority of my commute. Once I got to work I shut down on Diesel. I did this for 2 years and ran about 66 gallons of WVO fuel per month through my car. The system worked flawlessly and saved me a ton of money. My best month of commuting costs I made two trips to Seattle from Salem in addition to my normal commute for a total of 275 MPG on fuel I was paying for. That month I made these trips using only one tank of diesel. Anyway, I now have a 7-minute walk to work everyday, so WVO just doesn’t work for me any more. I have had this stuff sitting in my garage for the past 2 years doing nothing. Now I wish to just get rid of. I decided to sell as a block as I just want to get rid of it and figured I could sell it one fell swoop. My reserve on this is low compared to what I originally paid. So here is what I have for sale: Redline 2000 Pump This pump has a 1/3 HP electric motor with a belt driven pump. The Motor is a Dayton electric motor model# 6K778G. According to the project specs, the motor is a"Belt Drive Motor, Split-Phase, 1/3 HP, Nameplate RPM 1725, Voltage 115, 1 Phase, Frame
|
|
I have for sale my biodiesel processor. I built this from plans I purchased from Utah Biodiesel Supply 3 years ago. Since then. I have used this processor to make high quality biodiesel from used vegetable oil that I've burned in my Ford F250 and my 2 VW diesels. This processor works great! The only reason I am selling it is because I want to build a bigger one and I need to move this one before going larger. This processor yields about 25 gallons of high quality biodiesel per batch and 1 batch will take you about 1-2 days depending how much time you've got. I also added several enhancements to the plans by adding a separate wash tank and a settling tank that are both the cone bottom design which allows you to have up to 3 batches in-process at the same time. I also added a smaller ... morecone bottom tank for mixing the catalyst. Also, I put the entire unit into a 4' X 5' plastic vat so if there is an oil spill, it will contain it instead of it running all over your garage or shop floor. This vat also makes it very convenient to move the processor in one contained unit with a tractor or forklift. The plans call for 1 pump, but with the extra tanks, this has 2 pumps to move the oil. It also has 2 filters to filter the final product down to 10 microns before you put it in your vehicle. I have over $2500 worth of materials invested in this processor but I'm letting it go CHEAP because I need to move it and it has just about paid for itself in fuel savings. I have the reserve set at $500- you couldn't build one for that price- that's 80% off of the cost of the parts to build it! With my present setup, this processor will make good biodiesel for about $1.07/gal. If you have a flatbed or a trailer, I can load it for you.
|
|
|
You are bidding/ buying A Palet Of Fisher Boxes. Big Joes, Esc. 7) Fisher Fieldvue Instruments(2) Big Joe's(1) Fisher PWV(1) Fisher DLC 3010 Transmitter(1) Fisher 98H-34(1) Fisher D-Valve(1) Fisher HSR-CCFAMYN(1) Fisher Fieldvue With Actuator Thank you for your purchase! If. For any reason, you have any questions or any sort of issue with your purchase PLEASE contact us before leaving feedback. Thanks di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-141582c517b-0xf6-
|
|
|
Come get oil local pick up only. 75 cents a gallon. Run cheaper and cleaner. Posted with
|
|
|
1 used pollak valve and a 3 way valve. Both used on a wvo system on a diesel van. Worked when pulled. As-is Flat $10 shipping to lower 48 Posted with
|
|
|
You are bidding on this slightly used OC-50 centrifuge. Fantastic little unit to clean. De-water, polish) WVO. Has spun approximately 300 gallons of vegetable oil. I was hired by a company to convert their fleet to WVO. Bought this unit polish vegetable oil, when the housing market crashed, the company went under and i inherited this unit. Time no longer permits its use, so it is for sale. Contains everything you need to spin oil, you must supply your own 55 gallon drum. If you have any questions, please feel free to contact me via e-mail. You will not regret buying this unit. Other WVO implements will also be listed soon. Payment is expected at end of auction. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1419d6187a5-0x102-
|
|
I am selling one of my WMO WVO centrifuges. It is based on a pressure cooker design. I am using a raw power centrifuge bowl( coupled to a 3450 rpm motor which is driven by a Fincor VFD(variable frequency drive) to spin the centrifuge at 6000 rpm. I built two of these and one was for a friend who changed his mind. I have some photos attached of the build of the unit for sale as well as some youtube videos of mine in action. These work very well at cleaning oil. All the parts are used so it is sold as is but guaranteed not DOA. The motor/vfd will require 220 volt single phase ac in order to operate. This is common in most garages or dryer hookups. It will come with the motor. Bowl and legs detached but I will include all the hardware, VFD manual and some instructions on how to use the centrifuge. ... moreYou will need to supply a 220 plug, available at Lowes, Home Depot and a way to feed oil to the centrifuge. I use a 5 gallon bucket suspended above mine with a ball valve to control the flow rate. Please email any questions prior to bidding. Starting at about 1/3 the price of new VFD controlled centrifuges.
|
|
|
Up for sale is a waste oil gear pump made from a new big block chevy oil pump.This pump has been tap threaded with two 1/2" NPT pipe nipples and I used JB weld to make a good seal the shaft is a half inch shaft that can be spun with an 1/2" chuck drill.This pump work great with just about any liquid.This pump was used for a few hundred gallons of waste motor so it is still in great shape.The shaft is a tight fit and just a few drops of oil comes out when in use.I put this pump on a 1/2" corded drill and was pumping about 10 gallons a minute at 40 psi. FREE SHIPPING TO THE LOWER 48 U.S.STATES.
|
|
|
5000 Gallon Steel Tank. 1/4" Steel, Double Walled, UL Approved for Flammable and Combustible Liquids, Ladders and Safety Rails Included but removed for shipping. 2" threaded bottom outlet. 2 1/2" flanged outlet. Man-way cleanout. Ultrasonic level sensor attached. 4" and 8" inlet. 6 Tanks Available. Price is for 1 tank. Manual and Automatic Pneumatic valves are available but not included. Great for Bio-diesel, Biodiesel, Bio Diesel plant or other alternative fuels. 3- 5hp Baldor right angle, gear reduction agitators available but not included. 3hp and 5hp Baldor 3ph gear pumps available but not included. Tanks are in excellent condition, only used for a few months, new startup company didn't make it. Tanks sold for $35,000+ each originally.
|
|
|
These are genuine factory OEM parts guaranteed! Used condition sold( AS IS) we nothing about this. Hoppers/ Railcars. MARTIN BRUTE CCV6-50-6A HOPPER HYDRAULIC VIBRATOR. Part# 22107-04/ integral clamp foot/ motor driven. Out force 9605 lbs/ with oil bath bearings. Actual part in photo what you see is what you get) Please compare part numbers or pictures. Customer service is our#1 priority any questions or concerns. Please call us@ 515-724-1199 M- F 9:00 am- 6:00 pm central time. Please provide us with a working phone number for shipping purposes. Most items will ship the same day or next day)
|
|
|
THIS IS A EXCELLENT CONDITION USED: GERSTEL Headspace Syringe 2.5ml- Glass Syringe. Model# 009980-055-00 SHIPPING: ALL ITEMS ARE SHIPPED OUT WITHIN 3-4 BUSINESS DAYS AFTER RECEIVING PAYMENT. ITEMS ARE USUALLY SHIPPED PRIORITY MAIL OR UPS. IF YOU HAVE A SHIPPING ACCOUNT NUMBER. WE CAN USE THAT TOO. GUARANTEE: ALL ITEMS SOLD ARE IN GOOD WORKING CONDITION OR OTHERWISE STATED. IF YOU HAVE ANY PROBLEM WITH ANY ITEM PURCHASED FROM OUR STORE. IT CAN BE RETURNED FOR A FULL REFUND. WE OFFER A 30 DAY RETURN, BUT IF YOU ENCOUNTER ANY PROBLEM WITHIN 60 DAYS, DEPENDING UPON THE PROBLEM, WE WILL STILL TAKE RETURNS FOR A FULL REFUND. PLEASE CONTACT US IF YOU HAVE ANY ISSUES. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-141f56f5b12-0x101-
|
|
|
HELLO! UP FOR SALE IS THIS FREEDOM FUELER HOME BIO-DIESEL PROCESSOR KIT. DESPITE BEING PREVIOUSLY USED. THIS KIT APPEARS COMPLETE, UNDAMAGED AND IN GREAT CONDITION TO BE USED ONCE AGAIN. Converts even heavily used oils and fats. Completely closed system with built in 7' vent lines. Dimensions: 48in. Long. 24in. Wide, and 62in. High Weight: Heated: 250 lbs. THIS UNIT IS FOR LOCAL PICK-UP ONLY. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANKS FOR LOOKING! Check out my! Be sure to add me to your!
|
|
This is the king of fuel filters on the market! If your looking for fuel filtration and removal of water and any other contaminants then this filter will give you what you want! Ideal for boats. Biodiesel, WVO, or any other application where contaminated fuel may be an issue. I AM ADDING FOR FREE TO THIS UNIT REMOVABLE 3/8 NPT ADAPTOR FITTINGS FOR BOTH THE INLET AND OUTLET FOR YOUR CONVENIENCE[shown in picture] AND 4 FREE PARKER RACOR FILTERS THAT HAVE A TOTAL VALUE OF AT LEAST $60.00[also shown in picture] EVERYTHING ON THIS WORKS GREAT AND IS IN GREAT WORKING CONDITION! Turbine Series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt. Rust, algae, asphaltines, varnishes, and especially ... morewater, which is prevalent in engine fuels. They remove contaminates from fuel using the following legendary three stage process: Stage One: Separation As fuel enters the filter assembly. It moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl. Stage Two: Coalescing Small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough. They too fall to the bottom of the bowl. Stage Three: Filtration Proprietary Aquabloc ® II cartridge elements repel water and remove contaminants from fuel down to two micron(nominal) They are waterproof and effective longer then water absorbing elements. Features and Benefits• Available in several sizes to fit any application. Heavy duty construction. Installs quickly. Available in 2. 10, and 30 micron. Easy to service. Clear collection bowl. Self-venting water drain. Optional accessories may include: water detection kits. 12 or 24 volt dc heaters, and heavy-duty fuel hose and fittings.
|
|
|
This is a custom made pump used to collect oil Used very little SUPER HEAVY DUTY will pump anything BSM gear pump. With 1/2 hp 110v electric motor 484-213-1081 Dave
|
|
500 Gallon HDPE Poly Cone Bottom Mixing Tank w/ Steel Stand Biodiesel WVO Soap Used tank in good condition. Some discoloration and staining. Some scratches and scuffs. Mostly outside. Great tank for biodiesel or WVO. Nice sturdy steel stand included. Last used for mixing soap/cleaning supplies. Includes bulkhead fitting on the bottom and two ball valves. Tank measures approx. 52" in diameter with an overall height of 80" Will have to ship freight. Please send zip code for an rough estimate of freight costs. NMFC will be 41024-3 with a freight class of 125. For an example. A similar tank shipped from OR to NM last year for around $400-$450, but freight charges change all the time. Local pick up is also acceptable. Sold"as is" without warranty expressed or implied. Buyer ... moreis responsible for determining the suitability of this product for their application. All items are sold as is FOB Hillsboro. OR. Buyer is responsible for shipping and handling or freight charges. Small items will be shipped USPS or FedEx Ground unless other arrangements are made.
|
|
|
Freedom Fueler Bio-Diesel Processor. Includes: 80 Gallon processor Cone Tank with methanol inductor tank Biokleen 350 Drywash System Exclusive 1500 Watt In Tank Heating System One Piece Steel Frame All Steel Plumbing Built-in Temperature Guage Fueling Station. Digital Process timer with on/off and event planning Built-In-Explosion-proof methanol pump New- In the Box- 720 GPH turbine pump Plus many accessories included Dimensions: 48in Long. 24 in Wide, and 62in. High Weight: Approx 250 lbs. Powered by
|
|
WASTE OIL B URNERS SAFE. CLEAN, RELIABLE Two sizes of INOV8 Waste Oil Burners cover a range from 125.000 to one million BTUs. The burners are fully certified to use with fuel oil up to#6 and any EPA approved used motor or vegetable-based oil. The two basic burner sizes have been used since 1990 on three sizes of INOV8 furnaces, 12 sizes of cast iron boilers, many standard fuel oil boilers, INOV8's waste water evaporator and as a replacement for competitor burners. The INOV8 burner includes many unique features that address the challenges of burning waste oil. These features are categorized into oil delivery. Safety controls and modular design. Oil Delivery There is a general consensus in the waste oil burning industry that preheating oil with electric heat creates operating problems. The ... moreintense heat applied directly to the oil will char it creating small carbon nodules that will eventually block the flow of the oil. To prevent that INOV8 burners move the oil quickly around the heating element. This was modeled after the automotive engine that moves the oil at three feet per second while the oil is being heated. With each pass through the heating system. The oil also passes through a 10 micron filter. This method allows the oil to be heated to a higher temperature where the fuel burns the best. The optimal preheat temperature varies based on the characteristics of the oil. For example common motor oil can burn satisfactorily when preheated to 150 o F. But synthetic motor oil has a much higher flash point and requires a higher preheat temperature. When oil is preheated to the optimal temperature there is complete combustion of all fuel molecules. The higher temperatures however release vapors that form bubbles that can cause fuel outages and smoke. INOV8 burners remove these vapors from the fuel to yield the most reliable, clean burning flame with the highest possible efficiency. The oil preheat system provides the fastest heat transfer into the oil with no related problems. The automatic vapor elimination pro
|
|
OUR LOSS AND YOUR GAIN ON THIS TOP OF THE LINE US FREEDOM FUELS BIO-DIESEL PROCESSOR. WE WERE GOING TO PROCESS BIO-DIESEL FOR OUR SMALL FLEET OF ISUZU NPR TRUCKS BUT DUE TO A UNFORESEEN CHARLOTTE AREA TRANSIT SYSTEM RAILROAD PROJECT IT IS SHUTTING DOWN OUR INGRESS AND EGRESS INTO OUR BUILDING. WE HAVE RESEARCHED BIO-DIESEL PROCESSORS FOR MONTHS BEFORE WE MADE A PURCHASE AND WE FOUND THE US FREEDOM FUELS PROCESS TO BE BY FAR THE BEST PROCESSOR ON THE MARKET TODAY. WE ARE SELLING THE EQUIPMENT FOR A MUCH LOWER PRICE THAN WHAT WE PAID FOR IT. THIS IS OVER 15K WORTH OF PROCESSING EQUIPMENT. WE ONLY PROCESSED A FEW THOUSAND GALLONS BEFORE WE REMOVED THE MACHINES FROM THERE PAD. THE WEBSITE IS usfreedomfuels.com TO SEE WHAT THIS EQUIPMENT SELLS FOR. WE HAVE EVERYTHING REQUIRED TO START PROCESSING ... moreBIO-DIESEL ALONG WITH A METHAONOL RECOVERY MACHINE WHICH WILL ALLOW YOU TO EXTRACT METHAONOL AFTER IT HAS BEEN USED FOR FLASHING AND RE-USE IT INTO THE NEXT BATCH OF OIL TO BE PROCESSED. THIS IS A HUGE SAVINGS AND A MUST HAVE IN BIO-DIESEL REFINING. HERE IS THE EQUIPMENT SPECS ON THE BD-65 BIO-DIESEL PROCESSOR Features of the BD65 Biodiesel Processor: 80 Gallon Preheat Tank with 4500 Watt Stainless Steel Element. Galvanized Removable Dust Covers for Both the Preheat Tank and the Settlement Tank. 130 Gallon Settlement Tank with 5500 Watt Stainless Steel Element for Methanol Flash. Fuse Protected Circuitry with UL Approved Control Panel. Timer Controlled Processor. One 1½ HP Pump. One 1¾ HP Pump. 75 Gallon Spill Containment Pallet. 10KG Freedom Clean Dry Wash Tower. Each BD65 is Shipped with the following items: 10KG Freedom Clean Dry Wash Tower 55# Bag of Potassium Hydroxide 2x50ML Beakers 2xGlass Stirring Rods 2x3ML Syringe 2x10 ML Syringe 2 OZ Phenolphthalein 1x15 Gallon Cone Bottom Injection Tank on Casters 1x55 Gallon Methanol Siphon Pump 1x Bottle of Isopropynol 1x Qt 1% KOH Solution Requirements for the BD65: 240 Volt. Single Phase with 4 prong outlet(Standard 4 Wire Range Plug) Allow 36 Square Feet of Floor Spa
|
|
|
35 gallon steel military surplus fuel tank designed to mount under a vehicle and filled from the top. Please note that the tank has rust on the filler cap and surface rust inside the tank. The tank will need to be cleaned and treated prior to use. It is being sold as is where is. Please email me if you are serious and would like a price on shipping through a freight company. Otherwise. Local pick up only.
|
|
|
250 Gallon totes. Last used to store used cooking oil(UVO) Will hold oil, outside/inside are dirty with vegi oil. Will assist in loading your truck Call Jason at 518 361 3908 for more info/ pickup
|
|
Hey guys. Today I am selling an incomplete Jetta TDI kit that needs some TLC. Buying these parts individually new would cost well over 400 dollars. I am starting the bidding at 100. I bought this with the original intent of installing it in a 1992 international school bus. Unfortunately. I have had some financial issues pop up and I am being forced to abandon the project. I got this for a bargain off craigslist and now I'm passing my good fortune off to someone else. I cannot attest to the working condition of any of these parts so I am selling this AS IS. I never had a chance to install them. But I am confident you will be happy with them. WHATS INCLUDED- 13 Gallon tank-The tank is caked in old vegetable oil. I did a little research and it can all be scrubbed off with a steel wool brush ... moreand some draino. Everything else appears to be in working condition. Fuel sender(Not pictured)Also caked with old veggie oil. Probably needs a new filter Manual controller(Not pictured)It appears to have everything intact. The metal casing around it is a little bent. Because it was removed from a totaled vehicle. Let me know if you have any questions. Happy bidding.
|
|
|
Tank has lines cut as shown in pictures. Inside of tank is dirty and should be cleaned before use. shipping price is for 48 continental USA only.
|
|
|
Includes scales and instructions both units are un working condition. Call 205-834-3833 pick up only no shipping offered Posted with
|
|
|
Used BriskHeat ECONO55-1 ECONO Metal Drum Heater. This fits 55-Gallon Drums. It is used but in good working order. Email with questions!
|
|
|
Working used BriskHeat barrel/ drum heater with adjustable thermostat. Approximately 4" wide and 65" long with spring closure to allow snug fit around 55 gallon drums. Worn and could use a new cord but works great. Heats very fast. New sells for $180+. Not for use on non-metal drums.
|
|
|
Used fuel injectors and glow plugs out off Cat accer 6.6 motor. Only have 5 injectors and 4 glow plugs. As is. Posted with
|
|
|
This is your opportunity to own some of the finest biofuel equipment on the market! I have used this equipment to produce approximately 700-1000 gal/yr since 2008. This auction gives you everything you need to get start producing except for the chemicals. I was set up to pay tax on my fuel and with that put me at about $1.80/gal. As you can see from pics this is all the highest quality components that have cost me a fortune. For the buy it now price you get EVERYTHING including the oil pictured. I will work with winning bidder to load or ship what they want or buy. Feel free with questions. The only reason for selling is that we are moving to a smaller property that does not have the space for this setup. I just finished using this setup in January.
|
|
|
WVO filtration system I have not used this in over a year so time to part with. Check out the YouTube for live demonstration. http:youtu.be/2I-alYn86RY All parts are functional. This system works by pumping oil from the bottom of the barrel through a heater element to the centrifuge back into the barrel. Local pick up only. Please email with question. Posted with
|
|
Up for bid is a used WVO Designs Raw Power centrifuge. This unit has served me well. But I no longer have the time and desire to pursue my WVO plans. I added a Control Techniques Comander SE.37KW variable frequency drive to control the speed, and a Cutler Hammer E45 48 temperature controller with thermocouple. No heater is included. The unit will be shipped in two boxes and will be disassembled for safe shipment. New seals, if needed, can be ordered from WVO Designs. They have exceptional customer service. The main shaft seal should probably be replaced since the motor will be removed from the bowl for shipping. I have been very happy with this unit. And have expeditiously cleaned over 1000 gallons of WVO. The VFD is currently set to spin the shaft at just under 6000 rpm with a simple flip ... moreof a switch on the outside of the 3R enclosure. It can be adjusted to suit your needs. The owners manual for the Control Techniques VFD is included. The centrifuge runs on 20 amps 220VAC. The heater control is 110VAC and includes the solid state relay and thermocouple. It can be used to control the heater sold by WVO designs.
|
|
J. Little Mercer Co. Inc. filter skid lot includes three items below and skid with controls. P-2523 2 inch PUMP Model/serial no. CRNS 30 JAR A JJEJJ7C Manufacturer Grundfos Pumps Construction stainless steel configuration vertical PSI:Jkt:in 40 gpm@ 230 psi Inlets/outlets 2" i/o General data Part of water filtration unit Motor 3 hp. 3460 rpm Electrical data 208-230/460v.3ph,8.2/7.8/3.9 amp, A-4677 150 gallon POLY TANK Manufacturer TERRACON Dimensions 30" dia x 5.15" o/a height.Open top Construction poly configuration vertical Inlets/outlets(3)2" upper side inlets. 2" lower side outlet,1" lower side outlet General data part of penfield liquid treatment system C-2450 4 cart. CARTRIDGE FILTER Model/serial no. 4D17. 4425B-03 Manufacturer(PLATE UNREADABLE) Construction/ ... morestainless steel configuration vertical PSI:Jkt:in 150 psi@ 250 DEG. F. Inlets/outlets(2)2" i/o. 2)1" i/o,25" vent General data Part of water filtration skid SELLING AS IS! OPEN TO OFFERS! Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|