|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Blue Springs, United States
NEW VCI DBS HYDROGEN GENERATOR PARTS. I AM NOT SURE IF THEY ARE PARTS FOR A MACHINE OR IF THEY GO TOGETHER TO HELP MAKE A SINGLE UNIT.
0 bids $5.99 Shipping
Condition: New Location: , China
Push in hydrogen gas, the hydrogen pressure is 0.02-0.04mpa, open the air outlet, drain the air in the battery and then close it. - Connect the hydrogen pipeline to the fuel cell inlet. - Hydrogen consumption: 14ml-21ml/min.
0 bids $3.00 Shipping
Condition: New Location: , China
1 x Fuel cell electric power generation module (PC). For DJI FPV Drone Battery Protection Cover Heightened Landing Gear Accessories. Set Filter Humidifier Filter for Honeywell Filter Honeywell Hev615 Hev620 Hft600.
Buy It Now
$88.00 Shipping
Condition: Used Location: Milton Freewater, United States
THIS IS A EXCELLENT FCTS H2412 GOOD CONDITION.
0 bids Free Shipping
Condition: New Location: , China
Hydrogen Fuel Cell Solar Power Generation Module Hydrogen Fuel Stack Educational. l Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. 1 x Fuel c ell (PC). l Rated power: 1W. l Working power: 0.7 - 1.1 W.
0 bids Free Shipping
Condition: New Location: , China
Night Flying Light LED Signal Lamp Kit for DJI Mavic Air 2/Mavic Mini/Mavic2 Pro. 1 x Fuel cell electric power generation module (PC). For SCX10 D90 TRX4 1/10 RC Climbing Car Spotlight Dual-Row Roof Lamp Light Kit.
0 bids Free Shipping
Condition: New Location: , China
Night Flying Light LED Signal Lamp Kit for DJI Mavic Air 2/Mavic Mini/Mavic2 Pro. 1 x Fuel cell electric power generation module (PC). For SCX10 D90 TRX4 1/10 RC Climbing Car Spotlight Dual-Row Roof Lamp Light Kit.
0 bids Free Shipping
Condition: New Location: , China
L Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. 1 x Fuel c ell (PC). l Rated power: 1W. l Working power: 0.7 - 1.1 W. l Color: black.
Buy It Now
$750.00 Shipping
Condition: New Location: , TR
Why should I buy a cyber energy hydrogen machine?. What is your difference from others?. Which hydrogen machine should I buy?. Warranty: Our machine has a one-year warranty and spare parts are provided for 5 years.
0 bids $75.00 Shipping
Condition: Used Location: Albany, United States
Hydrogen Plasma Fusion Research Vessel.
0 bids Free Shipping
Condition: New Location: , China
1 x Fuel cell electric power generation module (PC). Open the lower outlet and plug it to drain the air from the battery. Note: the blue module only, other modules in the picture are not included. Connect the load.
0 bids Free Shipping
Condition: New – Open box Location: San Bernardino, United States
Buy It Now
Free Shipping
Condition: New Location: , United States
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
0 bids Free Shipping
Condition: New Location: , China
L Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. Encoder Plug Connector for Panasonic Yaskawa Molex JZSP-CMP9-1-E Servo Plug. QPE2-A4R7MD3 NoPower Consumption PTC Starters Insert for 110V Freezer Compressor.
Buy It Now
$135.00 Shipping
Condition: New Location: , TR
The water level of the main tank and filter tank with two led light are shown. The light goes out when the water level is low. Water should be added until light is on. The warranty is 1 years, parts and labor, but with proper care, your unit will last for years.
0 bids $5.00 Shipping
Condition: New Location: , China
L Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. 1 x Fuel c ell (PC). l Rated power: 1W. l Working power: 0.7 - 1.1 W. l Color: black.
0 bids Free Shipping
Condition: New Location: , China
1 x Fuel cell electric power generation module (PC). Open the lower outlet and plug it to drain the air from the battery. Note: the blue module only, other modules in the picture are not included. Connect the load.
Buy It Now
Free Shipping
Condition: New Location: Bountiful, United States
Silicone is the choice material for Low & high temp and provide a great seal for a leak proof assembly of the HHO cell. This silicone gasket fits perfectly with 6" square plates and custom made to provide the most surface area for HHO production.
0 bids Free Shipping
Condition: New Location: , China
L 0.6V Hydrogen Fuel Cell Power Generation Module Hydrogen Fuel Stack. l 1 Hydrogen Fuel Cell Stack. Power Drive / Start Button for LG WD-N10240D/T12360D/A12355DS Washing Machine. For Airpods 1st/2nd Generation Wireless Earphones Headphones Battery.
0 bids $12.60 Shipping
Condition: New Location: Katy, United States
316L grade stainless steel HYDROGEN GENERATOR KNOWN AS JOE CELL. AAA Stainless, Online Cut to Size 1/8" up to 4" OD tubes! Total of 4 tubes. We carry 304/316 (SMLS) (WELD) stainless steel tubes, pipes, rods.
Buy It Now
$48.50 Shipping
Condition: New Location: Los Angeles, United States
Buy It Now
$750.00 Shipping
Condition: New Location: , TR
L8 5000 WATT CARBON CLEAN MACHINE 2400L HHO GAS. L8 5000 WATT CARBON CLEAN MACHINE 1200L HHO GAS. THE DEVICE CAN PRODUCE UP TO 1200 LITERS OF HHO GAS PER SAT. Which hydrogen machine should I buy?. Why should I buy a cyber energy hydrogen machine?.
Buy It Now
Free Shipping
Condition: New Location: , United States
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
0 bids Free Shipping
Condition: New – Open box Location: Lyons, United States
Used to reduce hydrogen input pressures to the lower pressure used by Typical Fuel Cells.
Buy It Now
$32.00 Shipping
Condition: New Location: , TR
Buy It Now
Free Shipping
Condition: Used Location: East Syracuse, United States
Included 1x PlugPower GenDrive 1700-36. Hydrogen Storage 1.7kg. Significantly Reduce Peak Power Demand - Demands for high-cost electricity eliminated. Pressure 350 bar. Reduce Site Emissions - Safe, clean, zero emission power sources.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
Buy It Now
$135.00 Shipping
Condition: New Location: , TR
It provides a motor and zero emissions. Allows you to protect the sound. Saves fuel. Recovers from high consistent repair costs. catalytic converter, egr valve, exhaust, spark plugs, peat clean. It extends the life of these parts twice.
0 bids Free Shipping
Condition: New Location: , China
0.6V Hydrogen Fuel Cell Power Generation Module Hydrogen Fuel Stack Tool Parts. l Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. We are dedicated to providing a high-quality product at a reasonable price.
0 bids $5.00 Shipping
Condition: New Location: , China
0.6V Hydrogen Fuel Cell Power Generation Module Hydrogen Fuel Stack Tool Parts. l Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. 1 x Fuel c ell (PC). l Rated power: 1W. l Working power: 0.7 - 1.1 W.
0 bids Free Shipping
Condition: New Location: 普陀区, China
Push in hydrogen gas, the hydrogen pressure is 0.02-0.04mpa, open the air outlet, drain the air in the battery and then close it. - Connect the hydrogen pipeline to the fuel cell inlet. - Hydrogen consumption: 14ml-21ml/min.
0 bids Free Shipping
Condition: New Location: , China
For Shark APEX AZ1002 AX950 AX951 AX952 Vacuum Cleaner Main Brush Roller Brush. Armor Watch Strap Multifarious Colors Optional for Samsung Galaxy Series Watch. Nylon Woven Watch Strap Watch Parts for Huawei Watch Fit Special Edition (B39).
0 bids Free Shipping
Condition: New – Open box Location: Lyons, United States
Gensure E-1100 fuel cell. 1100 Watt Hydrogen Fuel Cell 48VDC.
Buy It Now
$4.99 Shipping
Condition: New Location: Bountiful, United States
This is a high quality Flat Silicone Gasket custom made to fit a 6" x 6" HHO plates dry cell. Silicone will provide a water tight seal and can withstand high temperature and the cold winter. It is the best electrical insulator for the HHO plates.
Buy It Now
Free Shipping
Condition: For parts or not working Location: Austin, United States
I have over 20 years of experience in the hydrogen fuel cell industry.
Buy It Now
$750.00 Shipping
Condition: New Location: , TR
THE DEVICE PRODUCES 1200 LITERS OF HHO GAS PER SAT WITH A POWER OF 5 KW. L8 5000 WATT CARBON CLEAN MACHINE 1200L HHO GAS. Since the gas production of these machines is very low, they do not provide real cleaning.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
0 bids Free Shipping
Condition: New Location: , China
1pc of Fuel cell electric power generation module (PC). Open the lower outlet and plug it to drain the air from the battery. Connect the load. The upper outlets on both sides is connected to the gas device by a conduit.
0 bids $3.99 Shipping
Condition: New Location: , China
1 x Fuel cell electric power generation module (PC). Open the lower outlet and plug it to drain the air from the battery. Note: the blue module only, other modules in the picture are not included. Connect the load.
0 bids Free Shipping
Condition: New Location: , China
L Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. For Samsung Galaxy Note 9 N960U 128GB Unlocked Mainboard Motherboard Logic Board. QPE2-A4R7MD3 NoPower Consumption PTC Starter Insert for 110V Freezer Compressors.
0 bids $5.00 Shipping
Condition: New Location: , China
For Motorola Walkie-talkie GP338D XIR P8668 P8628 Key Board Connection Cable. Solar Panel Double-sided Junction Box 1500V/30A Photovoltaic Connector Box. 1 x Fuel cell electric power generation module (PC).
0 bids Free Shipping
Condition: New Location: , China
24BYJ48 DC 5V 4 Phase 5 Wire Gear Stepper Motor Reduced Speed Synchronous Motor. Night Light Searchlight Fill Lamp Adapter Mount Bracket for DJI Mini 4 Pro Drone. Mouse Roller Wheel Scroll For Logitech Wired G502RGB G502SE Wireless G502 G502X.
0 bids Free Shipping
Condition: New Location: , China
1 x Fuel cell electric power generation module (PC). Open the lower outlet and plug it to drain the air from the battery. Note: the blue module only, other modules in the picture are not included. Connect the load.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
0 bids $5.00 Shipping
Condition: New Location: , China
0.6V Hydrogen Fuel Cell Power Generation Module Hydrogen Fuel Stack Tool Part. l Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. 1 x Fuel c ell (PC). l Rated power: 1W. l Working power: 0.7 - 1.1 W.
Buy It Now
Free Shipping
Condition: For parts or not working Location: Austin, United States
Sold as is. See pictures for details.
Buy It Now
$4.99 Shipping
Condition: New Location: Bountiful, United States
This is a high quality Flat Silicone Gasket custom made to fit a 6" x 6" HHO plates dry cell. Silicone will provide a water tight seal and can withstand high temperature and the cold winter. It is the best electrical insulator for the HHO plates.
Buy It Now
Free Shipping
Condition: New Location: Norwalk, United States
HONEYWELL DP3040A5003 DEFINITE PURPOSE CONTACTOR. Condition is New. Brand New in box never been used. Shipped with USPS Priority Mail.
Buy It Now
$40.00 Shipping
Condition: New Location: , TR
HYDROGEN GENERATOR HHO DRY CELL 16 PLATE. Gaskets: We use acid-resistant gaskets to ensure long-lasting operation. What we have learned is that EPDM gaskets are great for hho generators. Natural rubber is not resistant to alkaline chemicals.
0 bids $3.00 Shipping
Condition: New Location: , China
1 x Fuel cell electric power generation module (PC). Open the lower outlet and plug it to drain the air from the battery. Note: the blue module only, other modules in the picture are not included. Connect the load.
0 bids Free Shipping
Condition: New Location: Cleveland, United States
Hydrogen Electrolysis. Water Electrolysis. Green hydrogen. For use in lab testing. Internally machines manifolds for liquid and gas distribution. Two (2) available.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
0 bids Free Shipping
Condition: New Location: , China
L 1 Hydrogen Fuel Cell Stack. Laptop Accessories include laptop AC adapter, portable laptop table, laptop drives and dvd burners. Fashion Electronics such as car mp3 player, gaming mouse, baby monitors, ebook readers etc.
0 bids Free Shipping
Condition: New Location: , China
L 1 Hydrogen Fuel Cell Stack. l Generation Current:0-0.6A. It may take longer to other countries or remote areas.
0 bids Free Shipping
Condition: New Location: , China
L 0.6V Hydrogen Fuel Cell Power Generation Module Hydrogen Fuel Stack. l 1 Hydrogen Fuel Cell Stack. For EUFY RoboVac 11S 11SMAX 15T 30 30C 15C 12 35C Side Brush Gear Set Repair Kit. TPM2.0 Security Module SPI 14Pin LPC 14/18/20 Pin for Asrock TPM2 -SLI -S -SPI.
Buy It Now
$40.00 Shipping
Condition: New Location: , TR
HYDROGEN GENERATOR HHO DRY CELL 21 PLATE. Gaskets: We use acid-resistant gaskets to ensure long-lasting operation. What we have learned is that EPDM gaskets are great for hho generators. Natural rubber is not resistant to alkaline chemicals.
Buy It Now
$4.99 Shipping
Condition: New Location: Bountiful, United States
This is a high quality Flat Silicone Gasket custom made to fit a 6" x 6" HHO plates dry cell. Silicone will provide a water tight seal and can withstand high temperature and the cold winter. It is the best electrical insulator for the HHO plates.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. 6V 1W Solar panel with good effect of weak light, high conversion efficiency and output power, with 30cm red black cable. Model: 6V 1W. Also suitable to be used for DIY. Item Type: Solar Panel.
0 bids Free Shipping
Condition: New Location: , China
1/10 RC Car Tail Wing Rally Powerhouse RC Car Accessories for 1/10 RC Cars. Washable Cleaning Brush Car Air Vent Cleaning Brush Car Interior Accessories. For Samsung Galaxy Z Flip Crocodile Pattern Protective Shell Phone Case Cover.
0 bids Free Shipping
Condition: New Location: , China
L Hydrogen consumption: 8L/min. l Hydrogen pressure: 0.03-0.06mpa. 1 x Fuel c ell (PC). l Rated power: 1W. l Working power: 0.7 - 1.1 W. l Color: black. The RMA number must not be written on the manufacturer's product box.
|
|
|
MGI-250 Hydrogen Gas Generator. This gas generator was originally manufactured for the jewelery industry for welding precious metals as it has a neutral flame. Non oxidizing or carbonizing. This was a $40, 000.00 option on a larger semiconductor manufacturing piece of equipment. They have been regularly maintained until removed from service. It can produce a minimum of 250 standard liters per hour at 5 psi. It can be hooked up to pressurized water and run 24/7 as it auto fills and has a built in scrubber to clean the gas of moisture and contaminates so the gas can be burned with a clean almost invisible flame with temperatures up to 6000 degrees F. This system is as removed from service and may need calibration or some service to get running. Service it yourself and save some money or use ... morethe parts for your our serious hydrogen gas experiments. 208-220 VAC single phase power input. You could also use an external DC power source to make gas too This is a complete system to make hydrogen gas. Ask questions before purchasing. Due to several non paying buyers.you must pay in 7 days or the deal will be canceled and you will be reported to ebay.
|
|
Pneumatic Pump STT40:1 has a pressure ratio of 40:1. Uses compressed air from a compressor source to operate. The purpose of the pneumatic pump is to take a source of gas from a lower level of psi and elevate the psi to a required level to operate equipment or to fill a tank. You can use any gas in this pneumatic pump including: Argon. Oxygen, Nitrogen, natural gas, propane Hydrogen, etc. The minimum supply pressure for the compressed air can be 14.5psi to 1450psi which will increase the gas compression to 4350psi on the outlet gas line. The gas inlet is 1/4" connector and the outlet gas connector is 1/4" The compressed air inlet connector is 1/2" This model has one interior chamber and two anterior chambers. Our regular price is $4999.00. Our competitors price is over $5999.00. ... moreThis is a used item and the price is $2495.00. Size: 21"L x 10"H x 7"W. Special Sale: $1295. 50% below cost. For use with H2 and other gases. Fill your own tanks with compressed Hydrogen fuel or some other type of gas or fuel.
|
|
|
ORIGINAL AND RARE 1940 FIRST EDITION EIGHT IMPRESSION(SMALLER THEN THE TENTH IMPRESSION) BOILER OPERATOR'S GUIDE CONSTRUCTION. OPERATION. INSPECTION AND MAINTENANCE OF STEAM BOILERS, WITH 310 TYPICAL STEAM ENGINEER'S EXAMINATION QUESTIONS AND ANSWERS BY HARRY M. SPRING. JR. PUBLISHED MCGRAW HILL BO O K COMPANY. INC NEW YORK AND LONDON 1940 THE PURPOSE OF THIS BOOK IS TO SUPPLY A MODERN HANDBOOK SPECIALIZING ON BOILERS AND BOILER EQUIPMENT. 353 PAGES ARE INDEXED WITH ILLUSTRATIONS AND INSTRUCTIONS BOOK IN VERY GOOD SHAPE ORIGINAL OWNER S NAME IN FRONT OF BOOK BLANK PAGE HARDCOVER
|
|
|
The GE Panametrics CGA 351 oxygen analyzer utilizes an zirconia sensor to determine oxygen content in process gases. Microprocessor-based electronics allow the GE Panametrics CGA 351 oxygen analyzer to take measurements from ppm levels to 100 percent oxygen.
|
|
Advanced lab kit manufactured by Square1 Energy. Used only a couple of times. With all the boxes and original packaging. The Advanced Lab Kit is the ultimate tool for serious researchers and HOD developers. In addition to what is included in the Lab Starter Kit. The Advanced Lab Kit includes an Alicat Measurement Device, specifically calibrated to measure HHO gas. The Alicat integrates with the Commander software to provide real-time visualization and monitoring of gas output relative to user adjustable and/or sequenced parameters. This data is logged and stored in a database along with the readouts from any sensors and parameters read directly from the SIC. This provides the ability to determine the correlations between subtle changes made to the cell operating parameters and the gas output ... moreof the cell. Included with this package is the option to join the HYDRO-MAXX TM Developer Network. If you choose to opt in to this program. Your database and testing results will be integrated with our master database, to which you will have full access. The intention is to provide a wealth of research data to those seriously interested in perfecting HOD technology by incorporating data from as wide a range of sources as possible. Instead of spending days or even weeks testing things that have already been documented elsewhere, the HYDRO-MAXX TM Developer Network will provide serious researchers the means for targeted development of HOD systems for specific applications. Firmly based on a plethora of scientifically acquired data. This package includes: Servo Integrated Controller POM(includes integrated Current Transducer) DB9 → P5 Connector Cable Cat5 Connector Cable Temperature Sensor Power Cable Connector Harness Gas Dryer Filter Assembly Commander L5 Disk(L4 + Data Acquisition. Data Base, Real-Time Graphing) Alicat Measurement Device MSRP 7.000 USD
|
|
Up for sale is a FuelCon TrueData-CMV 70 Fuel Cell MOnitor. Unit is in good used condition. Comes as shown. Sorry. No other accessories, power supply, documentation or software available. Please ask all questions before purchasing. Satisfaction guaranteed. Buyer may return within 10 days or receipt for a refund(less shipping charges) Please use shipping calculator for actual delivery costs. Although the Ebay shipping calculator shows UPS we will ship via FedEx ground. If you need it quicker. Please contact us. All items are packed with care. I've been buying and selling on Ebay for many years. I try to treat my customers like I would like to be treated as a buyer. If you have any problems with any items purchased through our store. Please contact us immediatly and we will make it right. ... moreBefore you email me a question. Please check here for some canned answers to some very common questions: Will you end the auction or sale early? The only way to end the sale early is to"Buy it Now" For the safety of both parties. I do not sell outside of Ebay. Will you ship overseas or to Canada? It may be possible to ship overseas or to Canada depending on the item. Please contact us for details. Do you have any manuals. Accessories, etc for the unit? I do a very good job of listing everything that is included with an item. Everything included is described in the listing and/or shown in the photograph. I'm local. Can I pick up the item? In most cases. No. Only for large bulky items will I consider local pickup. Will you sell a accessory separately or make a copy of a manual or software for me? In most cases no. The accessories provided go with the unit we are selling. If we have any extras they would be listed in our store. We do not copy manuals or software. I will try to answer all questions as fast as possible. Please allow at least 24 hours for answers to most questions. I appologize for all the rules. However. I find it necessary to put these in writing to deal with a small number of"problem" Ebay
|
|
USED 24 Volt Power Supply Used in Fuel Cell Display unit Up for auction is this used 24 Volt Power Supply unit. It measures about 4 1/2" x 4 1/2" x 2" It was part of the display case system. It is working and was tested. It should work fine for someone who has the know how. Last picture shows the Display case and the 24 Volt Power Supply mounted in it. This auction is for the 24 Volt Power Supply ONLY without the case or anything else! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. ... moreList your items fast and easy and manage your active items.
|
|
USED two piece GDS-200 FLAMMABLE GAS SENSOR unit Up for auction is this used fuel cell FLAMMABLE GAS SENSOR unit. It measures 10" x 6" x 2" It measures 8" high. 5" wide, 2 1/4" deep. The sensor itself measures 3 1/4" x 3 1/4" x 1 1/2" I have the connector plug taped to it. It was powered by 220volts. It was part of the display case system. I don't know how to test it so it is sold"AS IS" untested. It should work fine for someone who has the know how. Last picture shows the Display case and the FLAMMABLE GAS SENSOR unit mounted in it. This auction is for the FLAMMABLE GAS SENSOR unit and sensor ONLY! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. ... moreBid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
milton_roy_erd-150_hydrogen_generator Milton Roy ERD-150 Serfas Elhygen RD NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 314775, Manufacturer: Milton Roy, Model Number: ERD-150, Description: Hydrogen generator, Made in: United States, Weight: 45Lbs, Condition: In use when removed, Cosmetic: Very Good, 115 Volts 1 Amps 60 Hz Have questions regarding this product? Contact us: ebay@megawavz.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise their bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless discussed with the billing party. In the case that payment has not been received within 7 working days. Groupe Interconnexion reserves the right to open an unpaid auction request.Unless ... moreotherwise notified) All Items are subject to a Packing and Handling Fee of 3% 15$ Minimum) Canadian residents should expect Provincial/Federal taxes to be applied. IMPORTANT: Read our shipping instructions allocated to your region; Canada. USA or International. Alternative buyer's shipping account are also welcome CANADA: A Minimum Shipping Charge of $20.00usd will be applied to all auctions. Higher rates will apply in northern Canada) Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Sorry. We will not ship post mail. USA: A Minimum shipping charge of $25.00usd will be applied to all auctions. Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculat
|
|
USED FUEL CELL VOLTAGE MONITORING UNIT Up for auction is this used fuel cell voltage monitoring unit. It measures 10" x 6" x 2" It measures 10 7/8" high. 7 7/8" wide, 4" deep. It was run by a separate computer system outside the box.I don't know how to test it so it is sold"AS IS" untested. It should work fine for someone who has the know how. Last three pictures show the Display case and the Fuel Cell voltage monitoring unit mounted in it. Seals never broken. Wiring and Plugs will be included. This auction is for the Fuel Cell voltage monitoring unit ONLY! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and ... moremy eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
USED FUEL CELL POWER CONVERTER 30 VOLT 10A Up for auction is this used fuel cell power converter. It's rated at 30 volts. 10A. All original mounting hardware included. It measures 10 7/8" high, 7 7/8" wide, 4" deep. I don't know how to test it so it is sold"AS IS" untested. It should work fine for someone who has the know how. Last two pictures show the Display case and the Fuel Cell Power Converter mounted in it. This auction is for the Fuel Cell Power Converter ONLY! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for ... morelooking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13ea636f13c-0xf9-
|
|
USED Fuel Cell Gas 24 Volt Valve Used From Fuel Cell Display Unit Up for auction is this used 24 Volt Valve. It measures about 4" x 3" x 1 1/4" It was part of the display case Fuel Cell System. It is working and was tested. It should work fine for someone who has the know how. Last picture shows the Display case. This auction is for the 24 Volt Valve ONLY without the case or anything else! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your ... moreactive items.
|
|
USED FUEL CELL System Control Up for auction is this used fuel cell System Control. It was part of a computer controlled system. No software or manuals are available or will be included with it. All original mounting hardware included. This would make a nice project box. It measures 11" Long. 6 3/4" wide, 2" deep. I don't know how to test it or hook it up so buyer assumes all risk and it is sold"AS IS" Untested. Last two pictures show the Display case and the System Control mounted in it. This auction is for the Fuel Cell System Control ONLY. NOT the display case shown or anything else! If you purchase more than one item wait for my invoice for combined shipping! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback ... moreand been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
LOT OF FIVE USED FUEL CELL SYSTEM PARTS Up for auction is this lot of five used fuel cell System parts. It was part of a computer controlled system. No software or manuals are available or will be included with it. This first item in this lot would make a nice project box. It measures 11" Long. 6 3/4" wide, 2" deep. I don't know how to test it or hook it up so buyer assumes all risk and it is sold"AS IS" Untested. Pictures show the other five items listed below in this Lot. Last two pictures show the Display case and the System Control mounted in it. This auction is for the Fuel Cell System Control. Power Converter, Cell Voltage Monitor, Gas Sensor Alarm and Detector, and 24 Volt Power Supply. NOT the display case shown or anything else! These are all packed and ... moreready to ship via UPS! They weigh 22 lbs. See my other listings for the rest of the parts in a LOT Listing. Thanks for looking. PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
LOT OF 18 USED FUEL CELL SYSTEM PARTS Lot#1 Up for auction is this Large lot of 18 used fuel cell system parts. It was part of a computer controlled system. No software or manuals are available or will be included with it. Pictures show the 18 items listed below in this Lot. ITEMS LISTED IN THIS LOT; Hi-Low float sensor Gas Flow sensor Gas Sensor Gas Regulator 10 Ohm Load Resistor 10 Ohm Load Resistor 10 Ohm Load Resistor PCB Board Rack of Wiring Connectors With Reset Breaker Black Box of Electronics Black Box of Electronics Wiring and Plug With Socket Wiring and Plug With Socket Wiring with Socket Wiring with Socket Brass"T" Tos Autonics Temperature Controller 25 Amp 230 volt. Breaker on mount. This lot has been discounted much cheaper than the individual sum of all the parts would ... morehave been. Last two items on list added at last minute in separate picture. Is not in the group photo. Last three pictures show the Display case and system diagram. This auction is for the Fuel Cell System parts shown below. NOT the display case shown! These are all packed and ready to ship via Large Flat Rate Priority Mail Box! See my other listings for the rest of the parts in a LOT Listing. Thanks for looking. PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
LOT OF Eight USED FUEL CELL SYSTEM PARTS Lot#2 Up for auction is this lot of eight used fuel cell System parts. It was part of a computer controlled system. No software or manuals are available or will be included with it. Pictures show the eight items listed below in this Lot. This lot has three BURKERT 24 volt DC valves-3.0 FPM. Two MPL-808-10 PSI-ADJ pressure switches with"T" fitting on each, and three pieces brass compression fittings consisting of 4"T" fittings with 2 valve fittings on them. This lot has been discounted much cheaper than the individual sum of all the parts would have been. Last two pictures show the Display case. This auction is for the Fuel Cell System parts shown below. NOT the display case shown or anything else! These are all packed and ready to ... moreship via Priority Mail! They weigh 6 lbs. See my other listings for the rest of the parts in a LOT Listing. Thanks for looking. PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This is one lot of HHO equipment. It includes 2 dry cells(1 large and 1 small) 2 bubblers(1 large and 1 small) 1 PWM controller on a mounting bracket, 1 AMP meter(0- 50) and 1 PVC separator. This equipment was purchased for a test project. Most pieces were only used a couple of times. All in great shape. Lost interest in the HHO project and now am cleaning out the garage. All sales are"as is" Ships only to the US.
|
|
| MackTruck Fluid Filter Element, Click to View Image Album The item that is for auction is a*NEW* MackTruck Fluid Filter Element Hydrocarbon Fuel or Oil Used for powersteering unit 2940-01-407-2809_ These items are NEW OLD STOCK! NOS) This offer comes as pictured. No additional items are included in this Auction. Sorry. But due to the Low Price that we are selling these items for WE CANNOT COMBINE SHIPPING COSTS OF THESE ITEMS. Please do not bid if this is not agreeable. NO RESERVE FOR THIS AUCTION A1-10088 Quoted ground shipping cost at bottom of action page is for continental US shipments only. This excludes Alaska and Hawaii. We do not ship until full amount is paid. If item is picked up. It is subject to a handling fee, which will be determined in the Winning Bidder's e-mail. The ... moresale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. We do not ship overseas; however. If you have someone in the USA we could ship to, they could ship it to you. Thanks for looking! Please Note: NOS parts are made by the OEM. These parts can range from 2 to 75 years old and were made to the standards of the year the part was manufactured. Most NOS parts are in good to excellent condition unless otherwise stated. But please do not expect them to be perfect. Most all of our items are government surplus and as such they are subject to have identifying marks such as etchings or paint or other various markings for use by the government for control purposes. Do not bid if this is not acceptable. Normal 0 false false false EN-US X-NONE X-NONE Quoted ground shipping cost at bottom of auction page is for continental US shipments only. This excludes Alaska and Haw
|
|
|
Up for sale is a HydroGen Micro Generator Precision Soldering Unit. This item is used and has heavy wear from average use. The cord in the back is exposed. So please have a close look at the pictures before bidding. It will power on, but has not been tested beyond that. Sold as is. No returns please. Please check my feedback and you’ll see that I’m a trusted seller who deals with quality goods. If there is a problem with the purchase after you have received your item. Please contact me immediately, as I strive for customer satisfaction. Thank you for your time! Immediate payment required. Only ships within the Continental United States(MS) 255978-2 LE(BB) 06/05
|
|
|
WELLER ENTERPRISE!22 PLATE HYDROGEN WET FUEL CELL! If you know anything about fuel cells then you know that a 23 cell wet cell is huge. It puts enough H2 out to run my motor cycle without any gas. Ive had this cell in my car for the past year. I only took it out to replace it with my new 100 plate cell. I hope it goes to a good home.good luck with it. Please only purchase this cell if you know how fuel cells work. This cell puts out a large amount of H2 and if miss used could produce a huge explosion. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f1a2b5b0b-0x101-
|
|
Hydrogen Fuel Dispensing Station Mfg. by Air Liquide for General Motors Co. Used from 2008-2012 to fuel 40 hydrogen/ fuel cell vehicles in the NYC area. All major components complete including piping and dispenser unit. A Sullair S-Energy series 3000/ 40 HP compressor functioned with the unit. The compressor is being offered separately from the hydrogen unit. Compressor is a standard 40 hp 150 psi unit. The nitrogen cooling system tank. Designed to accompany the full system, was leased from Praxair. Reinstallation of the system requires a nitrogen tank to be leased as well. Cost at time of installation: $457.000 Info: 802-342-0293 Shipping Information: Hydrogen unit is installed in a modified 8'W x 20'L cargo container. The container has been modified to carry additional weight and ... moreprovide ventilation. Total weight of container is approximately 37.000 lbs Fuel dispenser: skid dimensions 40"w x 130"l x 48"h Freight quote available with C. H. Robinson Worldwide Inspection by Appointment?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f2ecd5272-0xa4-
|
|
Listing include: 1.5 Quart HHO Heavy Duty Bubbler/ Reservoir with fluid level sensor inside, 11x 1/4' Barb Fittings 90 degrees(18 NPT) 2x 1/4; Barb Fittings straight(18 NPT) 4x stainless steal clamps. 1/4' to 5/8' I.D. 2x 1/4' Barb Fittings straight- 1x 1/4' check valve- 2x 1/4' fuel hose( approximately 10 ft and 6 ft) Every item on listing is on the pictures. Please check it carefully. Items lightly used for checking my HHO system. I ship to 48 US States. no shipping to Alaska,Hawaii, Puerto Rico and the US Virgin Islands) no International shipping. Payment must be received within 48 hours of the close of the auction. Otherwise. I reserve the right to cancel the order and relist the item. Returns: I accept returns within 7 days. When returned. Item must be in the same ... morecondition as when shipped. Buyer pays shipping on returns. I will usually ship within 2 business day of receiving cleared payment. DELIVERY CONFIRMATION INCLUDED. IMMEDIATE PAYMENT REQUIRED.
|
|
250 EBOOKS AND PDF'S THIS IS AN INCREASE FROM THE LAST EBOOK COLLECTION OF 100 EBOOKS. THIS HAS 250 EBOOKS ON FREE ENERGY DON'T WAIT TILL THE END OF THE WORLD! THIS IS THE LARGEST FREE ENERGY EBOOK COLLECTION ON EBAY. IT HAS OVER 400 FREE ENERGY DEVICES, MAGNETIC TESLA COIL, ANTI GRAVITY SYSTEM GENERATORS, VEHICLES, MAGNETIC MOTORS AND HYDROGEN POWERED CARS. CONCEPTS. KNOWLEDGE, FORMULA'S AND DIAGRAMS THIS MEGA EBOOK COLLECTION WILL BE SENT TO YOU ON A DVD DISC THE BOOK CONTAINS LINKS TO HOW TO VIDEOS! YOU WILL HAVE OVER PAGES OF PICTURES, DOCUMENTS, DIAGRAMS, INSTRUCTIONS, PATENTS, STEP BY STEP GUIDES TAKE ADVANTAGE OF THE SUPPRESSED TECHNOLOGY INCLUDING: NIKOLAI TESLA COILS BOB NEAL MOTOR LEROY ROGERS MOTOR JAMES HARDYS WATER JET GENERATOR VIKTOR SCHAUBERGER MIKE BRADY'S ... morePERENDEV MAGNET MOTOR THE MURILO LUCIANO GRAVITY CHAIN LAWRENCE TSEUNG'S GRAVITY IMPACT WHEEL DANIEL COOK'S INDUCTION LES BROWNS PYRAMIDS STANLEY MYER HYDROGEN/WATER POWERED CAR(DIRECTIONS. PATENTS, DIAGRAHMS, AND PICTURES) SIMPLE MOTORS, GENERATORS IMAGINE NEVER HAVING A POWER BILL EVER AGAIN. NO WAITING AT THE PUMP, AND HELPING YOUR ENVIRONMENT! WE SHIP WORLDWIDE! INTERNATIONAL BUYERS. ALLOW FOR 2 WEEKS FOR DELIVERY ALL BOOKS WILL BE ON A DVD DISK. TABLET. IPAD, NOOK, KINDLE FRIENDLY! CLICK THE LINK BELOW TO VIEW BOOK LIST AND VIDEOS AGEOFLUCIDITY.INFO 200 EBOOKS IN TOTAL 2447 PAGE Free Energy Book(15 Books in 1) 1) Magnet Power. 2)Moving Pulsed Systems. 3)Motionless Pulsed Systems. 4) Gravitational Pulsed Systems. 5) Energy-Tapping Pulsed Systems. 6) Battery-Charging Pulsed Systems. 7) Aerial Systems. 8) Fuel-less Motors. 9) Passive Systems. 10) Vehicles Systems. 11) Other Devices and Theories. 12) Electronics Tutorial. 13) Doubtful Devices. 14) Renewal Energy Devices. 15)The Present Situation. 50.000 Volt DCPower Supply. Gas electrical hydrogen generator. Magnetism. Alexandersson- Living Water- Viktor Schauberger and the Secrets of Natural Energy(1990) A-Long-Term-Survival-Guide-Scrounging-Metal-and-Survival-Blacksmi
|
|
|
HHO ELECTROLYTE RECOVERY TANK BUBBLER HYDROGEN CELL You Are Buying A Bubbler/Water Reservoir for HHO Cells. Come with a Plug in the Top for easy Refills. Side Glass View That Allow to see The Water Level and Conditions. Suitable for HHO Dry Cell or Wet Cell Water Reservoir, Bubbler or Water Holding Tank. This unit was constructed and tested but never installed in a vehicle. Shipp NOT available internationally or to Alaska or Hawaii, N.C. residents add 6.75%
|
|
HHO Hydrogen GENERATOR for Cars and TrucksThe HHO Booster is an on-board electrolysis system that generates hydroxy gas at a rate of approx. 1 liter per minute. To go into the air intake, to improve mileage and decrease emissions. An HHO booster is a piece of equipment which increases the mpg performance of a car or motorcycle. It does this by using some current from the vehicle’s battery to break water into a mixture of hydrogen and oxygen gasses called“hydroxy” gas which is then added to the air which is being drawn into the engine. The hydroxy gas improves the quality of the fuel burn inside the engine, increases the engine power, cleans old carbon deposits off the inside of the engine, reduces the unwanted exhaust emissions and improves the mpg figures under all driving conditions. This ... moreunit was constructed and tested but never installed on any vehicle. NOTICE/WAIVER OF LIABILITY Caution: This is not a toy. If you make and use one of these, you do so entirely at your own risk. Neither the designer of the booster, the author of this document or the provider of the internet display are in any way liable should you suffer any loss or damage through your own actions. While it is believed to be entirely safe to make and use a booster of this design, provided that the safety instructions shown below are followed, it is stressed that the responsibility is yours and yours alone. We are not responsible for any damages that may be caused to you, anyone else or your vehicle engine, drive train, personal property, etc. by the purchase and use of any of these products/ parts used for the Hydrogen Generator as well as the information provided that we sell. We are not responsible for improper installation, use, maintenance or operation of these parts. We know, for a fact, when hooked up properly, they create Hydrogen Gas which is HIGHLY EXPLOSIVE. Caution MUST be used when handling this by product of water.ALWAYS use and/or install these in a well-ventilated area and NEVER near a flame. Gas travels and could ignite at an
|
|
|
unit was removed from a salvage truck. It appears to be in good condition and useable.
|
|
|
Up for auction is a HH2 system. This was removed from a 96 Lexus LX 450 that the previous owner had installed. I removed it after purchasing the vehicle. I never tried to use it before removing so it is being sold for parts only. The reservoir tank that holds the water is broken. See pictures for more info. Shipping to address in continental US only. No waranty no return. Thanks for looking. Posted with
|
|
This is a 64 cell Ballard Power Mark1012 ACS 2.88 kW(2880 watt) open air cathode proton exchange membrane(PEM) fuel cell stack. This uses state of the art self humidifying membrane technology. This completely eliminates the need of an external air humidification system and significantly simplifies system integration. With no moving parts and high efficiency. This fuel cell produces clean DC power with a low thermal and acoustic signature. The same air that feeds the fuel cell also maintains the stack temperature(60C) eliminating a complicated liquid cooling subsystem. The air moves though the passageway in each cell of the fuel cell similar to an automotive radiator. This type of fuel cell is easy to integrate as it only needs a variable speed fan to supply air for the reaction and temperature ... morecontrol as well as a hydrogen supply system( 5 psig) with or without hydrogen recirculation. This a top of the line hydrogen fuel cell with good power density for use in a multitude of applications. Properly serviced and maintained this unit can provide over 10.000 hours of performance. Perfect for of grid battery charging, portable power, or a science/engineering project. This was used for demonstrations and is in very good condition. It was working when pulled out of service. Therefore. It is being sold as is. Does not include the test stand shown in the pictures. No controls or support systems are included. I have over 10 years of fuel cell experience and can assist you in your integration or build your project for you around this stack. I also specialize in hydrogen storage systems. Specifications Rated Power[kW] 2.88 kW Rated Current 65 Amps DC Voltage(open circuit) 54 VDC DC Voltage(full load) 45 VDC Mass(approximate) 32 lbs Stack core height 16" Stack core width 16” Stack core depth 4.5" Will ship world wide. Shipping costs and customs clearance is responsibility of the purchaser. Ships from 77845. Shipping outside of the United States will have higher shipping costs. Shipping will be calculated after the a
|
|
|
These Fuel Cell Technologies 100 cm2 Single Cell Hardware Fuel Cells are in real good condition and guaranteed to function 100% They came from a local lab that was upgrading equipment. Included in listing are 5 fuel cells without graphite blocks which will be sold for $1000 a piece. We can accept pay pal or your credit card. Please contact me with any questions. A Fuel Cell Hardware Assembly consists of a pair of Poco Graphite Blocks with a precision. Machined flow-pattern and a pair of gold-plated connectors fastened with aluminum end plates. Gas inputs and outputs are through Swagelok fittings. 100SCH 100 Sq. Centimeter Cell Hardware(No MEA Provided) Ref. Electrode not available $4600.00 RETAIL
|
|
|
These Fuel Cell Technologies 50 cm2 Single Cell Hardware Fuel Cells are in real good condition and guaranteed to function 100% They came from a local lab that was upgrading equipment. As seen in group picture. Various components of hardware assembly are or are not provided(terminal wires, heater plug, etc) We can accept pay pal or your credit card. Please contact me with any questions. A Fuel Cell Hardware Assembly consists of a pair of Poco Graphite Blocks with a precision. Machined flow-pattern and a pair of gold-plated connectors fastened with aluminum end plates. Gas inputs and outputs are through Swagelok fittings. 50SCH, 50 Square Centimeter Cell Hardware(No MEA Provided) $3210.00 RETAIL,
|
|
|
This is the same chip that is sold by HydroClubUsa here: This is flashed for a 1999 Plymouth Voyager mini van but can be easily re-flashed. I had this re-flashed once already(changed vehicles) and I think it cost me $15.00 for the re-flash. FAST AND FREE SHIPPING!
|
|
Meet the new cell design from Advance Tech Engineering! Incorporated in this new design is years of testing in collaboration with plating in the Semiconductor Industry. Our innovative designs alone show that we are leaders in the hydroxy industry. Buying our products is like investing in the future. With every purchase from us. We are able to move the future of energy closer. Our ultimate goal is to bring free/cheap energy to the world. This Cell uses and requires 220v and produces up to 15 LPM. ATE used this cell for testing and running vehicles on solely hydroxy. You can see this cell in action here: and here: To see more of our products please see our website at Our home page Advance Tech Engineering prides it's self on being the far most knowledgeable on all things hydroxy/hho. So ... moreif you have any questions at all, feel free to ask!
|
|
|
Up for auction is a water electrolysis unit that was purchased as part of an estate auction. It is being sold as-is and all sales are final. From what we know about this unit. It was used strictly to convert water into hydrogen/HHO mixture. By the looks of it, it was used very little. It appears to be a very high quality unit and is of stainless steel construction. We do not have any data on it, but it appears to have been custom made. We filled the unit with water and applied 12 volts to it for testing. It appeared to be producing gas at that point. But no futher testing was done. Unit measures approx 12 inches high by 4.5 inches wide. Buyer pays actual S&H. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-142f9a10403-0x101-
|
|
This tank was briefly used in an experimental hydrogen fuel cell vehicle. The vehicle has been stored in a University basement since about late 2007-2008. The tank is in very good condition. This is a Type 4 tank rated for 250 Bar = 3600 psi. It measures 18” in diameter and 51” long including the valve on the end. This includes the mounting brackets shown in the pictures as well as a high pressure transducer. The tank is due for inspection and re-certification in 2015. If you require a larger or higher pressure Tank please contact me. I also have a 350 Bar 5000 psi Dynetek tank measuring 23.7” in diameter and about 42” long including the valve manifold. This is a Type 3 tank and can store approximately 4.26 kg of H2. This too was used briefly in a fuel cell prototype vehicle. The vehicle was ... morealso stored in a University basement since around 2007-2008. The tank is in very good condition with few cycles and is certified until 2019. It includes mounting brackets and a 350 Bar refueling nozzle. This auction is just for the one Lincoln Composites Hydrogen tank. Like I said. Knowing the history of the company that built the vehicles and where they have been in the last 6 or so years it has seen very few cycles. Let me know if you have any other questions. I have been designing. Building, and integrating hydrogen storage systems and hydrogen fuel cell systems in vehicles for over a decade. If you need assistance with integration or design please contact me. I can provide turnkey solutions for almost any platform. H2 tanks are notoriously difficult to purchase in small quantities. With my industry contacts, I can help source hydrogen tanks of various sizes for your project. Winner must make payment within 3 days. Please note there is no paypal or CC on this item due to it`s value. This will ship by freight and added to the final price unless you make your own shipping arrangements. When the auction is complete I will email the winning bidder an invoice with shipping costs. For cost estimations assume 275 lbs. Thanks for
|
|
Price Reduced from $85k- Need to move Stuart Energy/ Hydrogenics Hydrogen Fuel System 15 Nm3/h on-site hydrogen generator For a continuous production of hydrogen and oxygen based on the principle of water electrolysis. As a default. The HySTAT consists of a Process Part. A Power Rack and a Control Panel along with a complete set of interconnecting cables. The core component of the electrolysis skid is the HySTATTM pressurized electrolysis cell stack. The cell stack consists of circular electrolysis cells. Each containing two electrodes and an alkaline inorganic ion-exchange membrane. Process Skid The H 2 and O 2 are generated when current is supplied to the cell stack. The gases are then directed to the gas separator. Which is a dual stainless steel pressure vessel, and then rinsed in the ... moresmall pressure vessel located above the gas separator. An ISO 20’ high cube container designed and modified to house the 15 Nm3/h hydrogen plant. SPECIFICATIONS- One full generation unit. Unit contains all components and hardware. Approximate weight: 12.000 lbs. Does not include external storage tanks. Model: IGEN 1000/15/10 H2 OUTPUT-Flow range: 6 to 15 Nm3/h-Purity(before HPS: Hydrogen Purification System) 99.9% H 2 O saturated) O 2-Cell Stack(s) quantity: 1 POWER REQUIREMENTS-Estimated power consumption@ full flow(after HPS) with utilities: 5.3 kWh/Nm3-Voltage: 3 X 400 VAC ± 10% 3 X 480 VAC ± 10% Standard in US option) Frequency: 50 Hz ± 3% 60 Hz ± 3% Standard in US and CA option) Ultima X-series gas monitors- Ultracool Superplus chiller unit-Feed Water Treatment System-HPS(Hydrogen Purification System) Make Offer- Price Negotiable" Payment: All payments must be made within 14 days. Arrangements can be made for payment methods. Shipping: Arrangements can be made for loading and shipping at the buyers expense. Contact Information: Any questions. Please contact by email kantnecc@muohio.edu
|
|
|
Tested with DI water and guaranteed working. The dessicant pouch may benefit from a regeneration process: put in an oven at 200C for about an hour. Packed in double-wall box with closed cell foam padding. It will arrive in good condition. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1432eb9a458-0xe7-
|
|
|
Normal 0 MicrosoftInternetExplorer4 30 amp PWM from HYDROGENWATERPOWER.COM 30 AMP. 12V Multi Function HHO Pulse Width Modulator hardly used, purchased form hydrogenwaterfuel.com cost over 300.00. Works fine, had little use. As far as I know it’s 12 volts not sure of the max amp capability multi frequency. I don’t have the exact specs on it nor can I find one identical to get the specs, as the website for the company is not available last time I checked recently.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14353e9f0dd-0xfa-
|
|
|
Hydrogen kit for small engines up to 3.5 liters. Most of the kit is completely unused. Just a few parts were used for testing then cleaned. The kit includes the following: 1. HHO Dry Cell Generator 8 plate of 316L stainless steel 2. Reservoir Bubbler 3. Pulse-Width Modulator-PWM-30A. 4. EFIE. 5. LCD Display HHO Am meter- 30A. 6. Relay. 7. Toggle Switch 8. Relay Socket. 9. Fuse Holder with fuse. 10. Solenoid 11. Fuel Vaporizer. 12. Instructions for installation
|
|
|
Up for auction is a gaseous fuel mixture unit that was removed from an experimental internal combustion engine. This is a liquidation item that was part of an estate sale. And is being sold as-is. Liquidation items are NON-RETURNABLE for any reason, and all sales are final. This unit was apparently designed to mix hydrogen/oxygen with air to be burned inside a gasoline engine. But will probably work with propane, natural gas, and other gaseous fuels as well. It appears to bolt directly onto the engine, just as a regular carburetor would. The controls seem to move freely. Because we cannot test this item, it is being sold AS-IS, and for PARTS ONLY. Buyer pays S&H. Please email or call 508-923-9503 with any questions.
|
|
|
PWM HHO Hydrogen Generator. Dry Cell Used but working really good.
|
|
|
This auction is for a used AquaPulser D1400 Gated Pulse Generator. I used this unit for testing with HHO generators several years ago and have not used it since. I do not have any manuals or other info on this unit. The unit does power on and work. Feel free to ask if you have any questions.
|
|
|
This ballard power hydrogen fuel cell was part of a power backup system that was decommissioned in working order. Total time on the cell is just over 600 hours. Has been stored in a temperature controlled warehouse since removal. Rated at 4kw continuous power. But can be used for up to 12kw peak power. Depending on when/where this sells, shipment may call for'no freeze' handling. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144103f5bc1-0xe3-
|
|
|
The Seway Father NineBot 2014 Is A Personal Robot Join ouer Comunity for Global Economy NEXT WEEK YOU HAVE IT Adam Huber Huber Heights International
|
|
This large PEM fuel cell is a module that was made for use in a rack that housed multiple units so that hydrogen and cooling was shared. This module contains four separate fuel cells. I can find very little technical information on the individual modules but from searching on the internet it would appear that they are either 41W or 60W. You could probably call the company(Avista) to obtain the specifications but suffice to say they are rather large as this type of fuel cells go. These are hydrogen-air cells which means that they obtain the required oxygen from the air. Hydrogen-air cells can be run on oxygen for added efficiency but it is much easier to simply use air. The air that provides oxygen is also used to cool the cell and take away excess water vapour, the visible metal plate is covering ... morethe duct that channels air through the body and over the membrane, there are vents visible at either end of the module. To use the fuel cell you will need hydrogen gas. An easy gas to obtain by electrolysis or from any bottle supplier. You will also need some sort of air flow through the module, a blower fan would do nicely. As it is, each end of the module has two cells wired in series which will produce about 1.2-1.4 volts, all in series it will be about 2.6V which can be used directly or stepped up using a boost module to get higher voltages. Easy to disassemble and clean. If you want it as parts then the elements could even be re-purposed, there is a fair amount of platinum and other precious metals in there too. The case is very robust, there are many small springs that provide strong and even compression over the membranes. Dimensions are 43mm x 171mm x 267mm and weight is a little under 1.5kg. Shipping is from New Zealand. If you have a preferred shipping method then I will be happy to use that. NZpost charges about $45 for a package of this weight(1.5kg) to the US, UK, and Canada, and about $20 to Australia, these aren't guaranteed but I will endeavour to keep costs below that. NZ shipping is FREE! If you are
|
|
|
H-TEC Fuel Cell Solar Hydrogen System PEMPower 1 Junior Classroom Instruction Kit This kit appears in good cosmetic condition. The photos show the actual items. I did not test this other than checking the meters and the stopwatch. One meter appears to be working. The other one and the stopwatch did not show any readings but may just need batteries. I do not know how to test it beyond that so I must sell it as is. I will accept a return if you are not satisfied but I cannot refund the shipping charges. Includes what is shown. US shipping only on this item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Ovonic Solid Hydrogen Storage canisters utilize proprietary metal hydride technology to safely store hydrogen in a compact manner at a low pressure. Up to 250psig. The metal alloy powder contained in the canister is formulated to absorb and release hydrogen similar to a sponge absorbing water. Canisters are designed to operate at ambient temperatures with no requirement for added heat and can store several times more hydrogen than similarly sized high-pressure compressed hydrogen cylinders. These canisters can be charged and discharged infinitely with no related memory problems that batteries incur unless contamination is introduced. Canisters may be re-generated fully if contaminated by moisture using a simple vacuum pump. These metal hydride storage cylinders were purchased for a pilot fuel ... morecell project that was not funded for completion. over $950.00 usd orginal price. Current pricing is higher) These cylinders have been charged and discharged(fully and partially) as many as 10 times in a laboratory environment using dry. Fuel cell grade hydrogen. You are bidding on one(1) 900 liter(80 g) Aluminum pressure cylinder filled with Ovonic proprietary Metal Hydride storage medium with manual control valve. Pressure/temperature relief valve and 1/8" female NPT connection. Specification sheets and refill instructions will accompany each cylinder. These are fully functioning items. No Returns. Please ask questions before purchasing. See pictures for P-T curve and basic specifications. Shipped empty(no hydrogen) and sealed with 1/8" npt plug. Details The Solid Hydrogen Storage Canister(International) 900 SL uses Ovonics Standard"Air Shippable" DOT-SP13280-400 Alloy and provides a hydrogen storage capacity of 900 standard liters. The Ovonic Solid Hydrogen Storage canister includes a manual shut off valve and safety valves for over pressure and over temperature conditions. Technical Specifications Hydrogen Storage Capacity(nominal) 85g/ 900 Std. L(condition dependent) Diameter: 3.5in. 8.9cm Length: 16.
|
|
This is for one Avista(Now ReliOn) Hydrogen Fuel Cell Blade Module with approximately 250 Watt Output and weighs 11 lbs. Great for science projects or to learn about fuel cell technology. This is used and was pulled from a working system. I have no way of testing the individual module. Sold As Is. Hydrogen enters and exits at the back two connections and air moves through the large opening. A series of fans should be sufficient to move the air. I have about 10 of these. I also have a complete 2000 watt system availablethat uses these hot swappable modules. See pictures for details. Let me know if you have any questions. Winner must make payment within 3 days. Thanks for looking. Check out my other auctions. I have a lot of fuel cell and hydrogen storage parts and systems. Let me know if you ... moreare looking for something.
|
|
|
For bid is used HHO generator. 2x 6” 21 plate dry cell generator was used in my Chevy Tahoe. Recently I am building 5 times larger wet cell and therefore my recent kit has to go. I purchased it 1 year ago on Ebay. I spent over $900 for the kit. You can have it for fraction of the price. Kit is in good working condition ready to install. What you see in picture that is what you get. For details check: http:www.ebay.com/itm/Best-HHO-6-21-Plate-Dr y-Cell-Generator-Kit-331064839649?pt=LH_DefaultDomain_0&hash=item4d15008de1&vxp=mtr.
|
|
This auction for a used Jadoo 100 Watt Hydrogen Fuel Cell. This shows signs of use but looks to functioning. I think the banged up appearance is from careless storage. When new this was rated for 100 watts and I was able to pull 50 watts from it. That's as far as my electric load would go. I can only say with confidence that this will produce 50 watt. See picture for voltage operating at 45 watts. I can not guarantee 100 watt output so please bid accordingly. This does not come with hydrogen storage. The winner will have to find a way to supply hydrogen to this system. Description from Jadoo: Jadoo’s N-gen is a fuel cell power unit that is both easy to use and reliable. The N-Stor refillable fuel canisters( not included) recharge the same the first time as the one hundredth. No memory ... moreas with traditional battery solutions. N-gen is capable of producing 100 watts of continuous power, perfect for recharging radios and cell phones in the field or powering surveillance equipment. The fuel cell system were originally developed to be battery replacements for in the field news cameras. See pictures for details. I have years of fuel cell experience so let me know if you have any questions or need assistance developing a system or solution. This is Sold As Is. Thanks for looking. Check out my other auctions for more fuel cells. If you are looking for something specific please let me know. I have a wide range of fuel cell parts. Stacks, and system available. Winner must make payment with in 3 days of the end of the auction.
|
|
Up for sale is a Plug Power“GenCore” 48Vdc. 5000 watt Hydrogen(PEM) proton exchange membrane fuel cell stack. There is less than 6 hours of actual run time on this stack before it was decommissioned from working Gencore fuel cell unit. Stack was removed and stored in heated warehouse since removal. It has been sealed with the protector caps the entire time it has been stored. It has never been exposed to freezing temperatures since then. It will need to be rehydrated before its next use. I have coolant that I can send along. Or can hydrate prior to shipping if you plan to use asap. Coolant is propylene glycol and distilled water) This would be a perfect replacement for a Plug Power Gencore system that needs a stack. Or would make a great project for hobbyist. Could also be a replacement for ... morean Ida-Tek or Ballard fuel cell system. Unfortunately I can’t keep this. Company is looking to recoup some of the costs. This is no longer made by Plug Power. However the replacement cost of the stack alone was $5800. I have all installation manuals/spec sheets. As well as extra Gencore parts/coolant that I can include in sale if requested. For a copy of manuals to look at. Email me at miscfuelman on gmail. Below are some specs that I know about this if you are looking to“play” with it. Specs: 46 to 56 volt operating range 5000 watt max continuous 0-109amp operating current range Actual hydrogen pressure into stack-1.2 to 1.8psig Maximum water emmisions-2 liters per hour@ full power load If looking for possible project with this(my knowledge) Top pipe on stack is for the coolant which houses a thermostat(just like a car. But opens at 120 degrees) There are two coolant pipes on bottom of stack. top one runs to a radiator just like a car to cool coolant when needed. One is the return to the stack, and the other goes to a coolant pump to keep stack from freezing when system isn’t running) Two AN connectors on back side are for the Hydrogen inlet. The second one is for the EGR blower(think car) which recirculates mixtur
|
|
|
This is a 40 amp PWM made by Hydrogen Boost Now. I purchased it for a project and never finished it. The unit works fine. Directions come with it. I never had it in a car just hooked up on my test bench when testing my cell. I know this unit works. So if you hook it up backwards and fry it, It's on you, no returns. Happy bidding. Ships to lower 48 only
|
|
|
It was used for 2 months. There is no original end plates but I added two pieces of plexi glass. Also. Barbs not included. No International Shipping!
|
|
|
I was cleaning my garage and found the HHO kit I use to use on one of my cars I nolonger have. This Kit was working and did raise my milage but depending on the vehicle you install it on you may need a controller. 1. The generator is a 9 plate 6" 1/8 gasket Best HHO dry cell generator. 2. Tank with 5 Ports 3. Amperage Gauge with 37.5 trip amp DC Circuit Breaker and 10ga wire 4. Relay and socket 5. all the used hose 6. 2 New O2 sensor extensions(I never got around to installing these) 7. 3/8 x 1/4 npt nylon hose barb for the intake 8. The instruction sheet I got with the generator. All Sold AS-IS Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14596985e2d-0x103-
|
|
|
Used condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145a07e6fb5-0x114-
|
|
|
Set was used 2 months. There are no barbs and no end plates- but I added 2 plexi glass. I ship to 48 US States. no shipping to Alaska, Hawaii, Puerto Rico and the US Virgin Islands) no International shipping. Payment must be received within 48 hours of the close of the auction. Otherwise. I reserve the right to cancel the order and relist the item. Returns: I accept returns within 7 days. When returned. Item must be in the same condition as when shipped. Buyer pays shipping on returns. I will usually ship within 2 business day of receiving cleared payment. DELIVERY CONFIRMATION INCLUDED. IMMEDIATE PAYMENT REQUIRED.
|
|
Used working great condition pull from working unit. I used in on my Madza 5 for 6 months and it did save me some money. What you see is what you get. I might send you the instruction if I can find it(consider I can't find it right now) I bought it from GreenSource 2 years ago for approx. $200 include the Pulse Width Generator. Basically connect the Red to 12V and black to negative. The 2 spades connect to the top of the fuel cell. I consider you do have some experience in connecting/ installing the fuel cell as i wasn't able to provide any technical support. Consider this kit as spare parts or junk. This kit includes: 1. H ydrogen generator reaction vessel with stainless outer(up to 4L engine) 2. Stainless Steel electrode pack 4. braided reinforced tubing(you might need longer) 5. ... moreFlashback arrestor 6. Fusible link(fuse and holder) 7. 16 gauge) red primary hook up wire(for 12 volts) 8. 16 gauge) black secondary hook up wire 9. 1 toggle switch 10. spade. Quick Disconnect” connectors for connecting to the toggle switch 11. Comes with PWM(Pulse Width Modulator) 12. Throw in 2 black rubber seals and one input connector for the fluid Comes with PWM(the circuit from the photos) If you require substantial HHO output. You need a PWM. PWMs control the current inside the generator, thus the HHO flow, and the temperature of the operation. Using PWM if: 1. You use KOH or NaOH as an electrolyte 2. You do not want to risk overheating the hydrogen generator 3. You live in a warm climate and/or require the generator to be working at higher flow rates. Ie. near their capacity. No warranties/ non return and ship in USA only.
|
|
|
This Hydrogen Generator works great. Comes with Wiring Diagrams and Instructions.
|
|
Normal 0 false false false MicrosoftInternetExplorer4 This is a used Plug Power GenCore 5T PEM fuel cell system. You need to supply pure hydrogen. And it will deliver up to 5,000 W at 48VDC. I have the operations manual and specifications. But I do not have the ability to test and certify the condition. However. These were fully functional upon decommissioning a several years ago. I cannot verify the hours of runtime on the stacks. Stack was removed and stored in heated warehouse since being decommission several years ago. Tubing is sealed with the protector caps. This is a good educational or learning tool. Or could be a great hobby project. Please don’t expect this unit to be refurbished and run for many years. It is an older model and not fully supported. I can put you in contact with some ... morecommunity colleges and ogther experts with knowledge of this unit. the replacement stack price used to be $5.800) and the complete system new was over $30,000. The unit is 48VDC and 5.0kW maximum power. Fuel input is 75 slm of pure H2 supply at max power. The total weight is 500 lb. There is no inverter. Only 48VDC output, but you can add an inverter or batteries, and/or solar DC for a complete system. You could pick up locally(SE Michigan. North suburb of Detroit) and I have a fork truck here on site. Alternatively, I will palletize, and ship via freight truck at your cost. I have three units available for sale. If you desire spare parts or redundancy. Normal 0 false false false MicrosoftInternetExplorer4
|
|
|
I am selling all 3 devices in this listing: 1 The Protium Fuel saver Mass air flow sensor tuner has three knobs( I had this on a Dodge Dakota 5.9 that I sold) 2 Hydrogen single Oxy sensor adjuster( comes with instructions) one knob one switch( I had this on a Dodge Dakota 5.9 that I sold) 3 If My memory serves me. I believe its a Eagle Research EFie kit that was assembled but not tested.eagle-research.com/cms/store/fuel-savers/efie-device-kit The first two did operate when I removed them The last one has not been tested All Sold AS-IS
|
|
Used 1 Plug Power Hydrogen Fuel Cell Graphite Bipolar End Plate from a GenCore Fuel Cell Stack One side has a flow field and the other is blank. The active area is approximately 245 cm2. The plate has internal cooling channels. The cooling ports can be seen on the edge of the center manifold. Put a PEM membrane(MEA) between two of these and you have your own single cell fuel cell or electrolyzer. These have molded in rubber seals on both sides of the plates so you won't need an O-ring or gasket. Overall the plates are in good usable condition. They came out of operating fuel cells that were only in operation for six months for a test project then they were decommissioned. If you have any questions contact me. Check my other listings for more fuel cell parts. Stacks, and systems. Sold As-Is ... morewith NO Warranty Local pick up or can be shipped. Buyer pays actual shipping. Cash in Person or PayPal Payment must be made within 3 days or item will be relisted. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1477f0a4bb3-0x10b-
|
|
|
This is a small hydrogen generation tank designed to fit underneath the hood of most automobiles. Everything is assembled. But installation will require some automotive knowledge. This tank has never been used. But I used one identical to it on my'93 Toyota pickup 4-cylinder gas engine. The hydrogen comes out of the top of the tank, and I hooked it into a vacuum line going into the intake. Its a fragile process to get everything set up right, but once it is, fuel efficiency and horsepower both increase. Some claim these devices can double efficiency, but I saw about a 5mpg increase, and about a 20HP increase. I urge you not to buy these components unless you are familiar with hydrogen devices.
|
|
Up For Sale: Stan Meyer Replicators kit: Phase Lock Loop driver circuit: This kit includes a replication of Stan Meyer's Phase lock loop driver circuit which includes the following circuits on a single circuit board: Cell Driver Circuit-Gated Pulse Frequency Generator circuit-Phase Lock Loop circuit-Resonant scanning circuit-Pulse indicator circuit-Variable Pulse Frequency Generator circuit The circuit board connects to the VIC and switches it on and off with a gated pulse train. The frequency is manually adjustable. But in auto it will sweep across a range of frequencies as it looks for resonance. When it finds the resonant frequency it locks onto it. As you can see from the pictures the circuit board is in complete working order. The circuit produces a gated pulse train in which the ... morepulse frequency. Gate frequency, and gate duty cycle is adjustable using small trim pots on the circuit board. The circuit also comes with it's own ac adapter-power supply. The Circuit board was purchased from Globalkast.com VIC coils and Bobbins Included is one set of ferrite U cores. These cores are very fragile and have been repaired in several places where they cracked. see pictures) There are also 3 bobbin sets included in the kit(See pictures) Both the VIC and Circuit board are housed in a plastic project enclosure for protection. see pictures) What you'll need As you can see from the pictures the coils have been partially taken apart and modified. If you want to make an exact replication of Meyer's circuit you'll need some 29 or 30 awg wire to re wrap the coils You'll also need a HV ultrafast diode for the coil as well as a water cell. Although this circuit performs exactly as it should replicating Meyer is no easy task. This kit comes with no guarantees that you'll have a successful replication. If you are operating this you should have some electronics knowledge so you don't damage the circuit. Yourself or someone else, or property. By purchasing this kit you agree to assume all responsibilit
|
|
Complete GenCore 5T Hydrogen Fuel Cell System- 5000 Watts This is a used Plug Power GenCore 5T PEM fuel cell system. You need to supply pure hydrogen. And it will deliver up to 5,000 W at 48VDC. I have the operations manual and specifications. These were fully functional upon decommissioning a several years ago but I cannot verify the hours of runtime on the stacks. The stack was removed and stored in heated warehouse since being decommission several years ago. Tubing is sealed with the protector caps. This is a good educational or learning tool. Or could be a great hobby project or used as backup power. The unit was made in 2004 and the complete system new was over $30,000. the replacement stack price alone is $5,800) The unit is 48VDC and 5.0kW maximum power. Fuel input is 75 slm of pure ... moreH2 supply at max power. The total weight is 500 lb. Due to the nature of the item. I am selling as-is and the item is located in Toronto, Ontario. If you want the item shipped, I can put the item on a pallet and ship internationally as well- but the cost will vary depending on location. Please contact me for proper shipping quote, but the item is quite heavy and large, so please keep that in mind
|
|
Famed producer of HHO units Denny Klein passed away last year and left very little behind but a legacy of stimulating the field of alternative energy. I knew him personally for years and we were completing a private label deal with him to produce our units for Kleangas when he passed away suddenly. He lived a larger than life kind of existence and never expected to die so he left no last will and his heirs suffered for it. Of the few things his son was left with is this HTA unit that Denny himself used for experiments and he would bubble the gas through his drinking water and would breathe it as well. I saw him many times in his back-shop with this unit"doing his thing" The unit for sale here is his personal unit and I promised his son that I would put it out there for sale so that ... morehe would have some funds to offset the costs of his father's passing. Included in the sale is the operators manual and the buyer will receive a personalized thank you. Note from Denny's son Greg Klein. This is primarily to help the family of this legendary man. Shipping is at buyers expense and via buyers specified method to be arranged post auction. This is a two man lift unit and extra charge will be added if crating is required. Basic handling charge of $80 is in any event. Item is for sale off-line also but if auction makes it to the final 24 Hrs it will be sold on EBay.
|
|
This is a working low voltage 2 kw alkaline electrolyser system that has been field tested since 2005. Hydrogen production capacity is up to 15 standard cubic feet/hour and has made well over 30 Mwh of zero emission energy from various RE sources It creates 99.9% pure hydrogen at 2000 psi. Meets or exceeds ISO standards. It is directly coupled to the RE source and can be coupled to wind or PV system simultaneously. Will automatically switch from RE power to grid power. System includes 2-1.4 Kw of PV(12 VDC nominal) Package includes: All electrical and computer controls. Data logging program, Historical performance data Fail safe safety system, 80 Kwh of H2 storage, Hydrogen purification system. Some spare parts and 15 gallons of Potassium Hydroxide solution Set up and training are also included. ... moreThis system comes with a money back guarantee. This is a large and heavy system with multiple components so delivery costs will be determined by final destination
|
|
Parker Balston Hydrogen Generator 75-31 Mdl. 75-31NA Used Thank you for choosing us! If you have any questions. Please ask any questions through EBAY MESSAGES. Exactly what is pictured is included. If you have doubts about what is included. Please ask before purchasing and we will be happy to clarify. We strive for 100 percent satisfaction with every sale. If there is a problem of ANY kind with an item you purchase from us. Please contact us through Ebay and give us the chance to make it right. We use a numerical rating system. Please refer to the item's condition number and the explanation of each number below The Condition of the item in this listing is: 2 Item descriptions are defined as follows: 1. Means the item is new/unused. 2. Means the Item is fully working with a 14 day warranty. ... more3. Means the item has some working issue or damage. If not explained above. Please ask or refer to pictures. This is being sold as-is. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Regardless of the origin of the equipment. Photographs provided in the listing, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified, recommended for, or offered for sale for any specific use and seller is not liable for any injuries or damages associated with the equipment. It is the buyer’s responsibility to have this item professionally tested and certified by an authorized technician prior to use. We accept Paypal. Please contact us ONLY through EBAY MESSAGES with questions. We do our best to ensure the safety of your item. We have bubble wrap. Packing peanuts, and high quality corrugated cardboard boxes. We w
|
|
Digital EFIE For Wide Band Oxygen Sensors Wide Band Quad EFIE For 6 and 8 cylinder engines that have wide band oxygen sensors. Vehicles that have wide band oxygen sensors. Only use them upstream of the catalytic converter. The downstream sensors will still be narrow band. This digital EFIE has 2 wide band and 2 narrow band EFIEs. It has one potentiometer that controls the 2 wide band and another pot for controlling the 2 narrow band. It will work with all types of wide band and AFR(Air/Fuel Ratio) sensors. It is the EFIE to choose for four and five wire oxygen sensors. Also note there is a variation of the 5-wire sensor that uses 6 wires. This device will work with these also. SLIGHTLY USED. I bought this off the"Hydrogen Generators USA" website. I used it a few weeks. It worked ... moregreat, and then I upgraded so I no longer need it. It was $99 brand new, so I'm sure you'll get it much cheaper buying it used from me. Happy Bidding.
|
|
|
These are electrodes taken out of operating hydrogen/oxygen generators. They are composed of a nickel mesh. They are better than stainless for use in electrolizers or HHO cells because they will not decay with use even when strong electrolytes like KOH. I will sell these 2 ways as full 24 plate sets 12 positive 12 negative or as individual plates. This auction is for a full set of 24 plates tied together in 2 sets of 12. The pictures are of a set that I cut some individual plates off for testing you will receive a full set with none removed. Please look at my other auction for sets of 2 single plates. I have a couple dozen full sets so a bulk deal is possible. Thanks Posted with
|
|
HHO 44 PLATE DRY CELL IS USED BUT IN VERY GOOD CONDITION. VERY LITTLE USE. This is a 44 plate Dry cel. the picture is of one identical but smaller. 44 Plates of 316L Stainless Steel Plates* Demensions: 12*6*6 inch* High temperature Cast Acrylic end Plates* Quad 1/4" 90 Degree Bronze Elbows with Hose Barbs* Neoprene Rubber Gaskets* Net Weight: 3kg* Our Dry Cell is expandable. Plate size is 4*4 inch* Plate's thickness: 1.2mm/18 Gauge* Production: 1LPM to 6LPM. Working at 10v to 30v. 3amp to 50amp. SHIPPING: YOUR ITEM WILL BE SHIPPED WITHIN 48 HOURS AFTER PAYMENT IS RECEIVED. YOU WILL RECEIVE AN EMAIL FROM US AFTER WE SHIPPED THE ITEM. WE WILL GIVE YOU THE TRACKING NUMBER SO YOU CAN FOLLOW YOUR ITEM VERY EASILY. PAYMENT: PAYPAL IS PREFERRED. PLEASE TRY TO MAKE THE PAYMENT WHEN YOU PURCHASED ... moreTHE ITEM OR IN 48 HOURS. PLEASE MAKE THE PAYMENT SOON THAT YOUR ITEM CAN BE SHIPPED TO YOU AS SOON AS POSSIBLE. SERIOUS BIDDERS ONLY PLEASE. THANK YOU. Return Policy: If you are not completely satisfied with your product simply return it with all accessories. Original packaging and manuals in"like new" condition within 48 hours of receipt for a refund, minus postage and handling and a 7% restocking fee to cover eBay and associated fees. products, accessories, original packaging or manuals not returned in original condition or showing signs of use or abuse will be subject to a 20% restocking fee. Return postage is the responsibility of the Buyer. Please take a moment to read our"Terms and Conditions" before you bid or buy. Terms and Conditions: TERMS AND CONDITIONS PAYMENT We only accept PayPal. Most major credit cards are accepted through PayPal. NON PAYING BIDDERS m. Non-paying bidders will be reported to eBay. Payment is expected no later than 3 days after the close of the auction. SHIPPING Usually your order will be shipped in 24 to 72 hours.But in most cases, we ship them out in the same day it is received Monday thru Saturday. We do not combine shipping. TRACKING NUMBERS You will receive a tracki
|
|
|
800x600 Surrey. Council, Corporate Reports, Regular Council, 2012 14.00 Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE Experimental Hydrogen Fuel cell unit. Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE
|
|
|
atago pocket pal 40-s sodium hydroxide digital meter great for measureing naoh in youre hydrogen generator works good
|
|
|
This is a H2o hydrogen generator kit that I purchased to convert your automobile engine to run on water. These were popular years ago when the gas prices sky rocketed. I have never used it or tested it. It has new components such as the water bottle filter cartridge w/SS plates(generator) Amp meter gauge, a back flow check valve and the starter solenoid. There is also some SS fittings. Bid accordingly for parts or whatever. See the photos. What you see is what you will get. Low starting bid& shipping. Shipped to the lower 48 states only. NO International Bidders Please. All sales are final with NO returns. Good luck bidding!
|
|
Plug Power SU1 hydrogen fuel cell generator plant. Has a large methane reformer section to convert natural gas to hydrogen. 5kw PEM fuel cell stack that outputs DC power, and a power inverter and battery bank to make AC power output. Tons of interesting goodies inside for the backyard inventor/scientist/experimenter. If nothing else there is about 20 kilograms of catalyst beads and also the PEM membranes that are full of platinum and rhodium. Govt surplus from research project. Has been in storage several years. Although it appears complete, due to the complex specialized nature of this type equipment it is impossible for me to test, therefore it is being sold as pictured in as-is condition for parts or repair. I may have access to several more of these units in time. Located near Fort Worth. ... moreTX Viewing welcome. Local pickup is encouraged. Because of weight of this item it can only be shipped truck freight. If you want it shipped, you the buyer are 100% responsible for making and paying for your own shipping arrangements from zip code 76112. I can deliver up to 100 miles radius of 76112 for $2.mile. Shipping weight is near 2800 pounds Size is about 6' long 40"wide and 6' tall. USA bidders only!
|
|
|
FOR SALE A USED PAIR OF HYDROGEN GENERATORS. THESE SELL FOR $58.00 A PIECE NEW. THEY ARE HYDROCLUB USA HHO DRY CELL HYDROGEN GENERATORS. I INSTALEED THE KIT ON MY DODGE TRUCK AND THEY WORKED GREAT BUT SOLD MY TRUCK TO GET A DIESEL TO PULL A LARGE BOAT. THESE ARE 9 PLATE STAINLESS STEEL GENERATORS. JUST ADD THE 12VDC POWER AND WATER AND WATCH THE HYDROGEN GAS COME OUT. THESE WILL INCREASE YOUR MILEAGE. JUST PLUMB THEM INTO YOUR INTAKE AND WATCH THE MPG GO UP. WILL NOT HURT YOUR CAR. GET 2 FOR LESS THAN THE PRICE OF ONE PLUS FREE SHIPPING.
|
|
Plug Power SU1 hydrogen fuel cell electric generator plant. Has a large catalytic methane reformer section to convert natural gas to hydrogen. 5kw PEM fuel cell stack that outputs DC voltage, and a power inverter and battery bank to make AC power output for grid connection. Tons of interesting goodies inside for the backyard inventor/scientist/experimenter. If nothing else there is about 20 kilograms of catalyst beads and also the PEM membranes that are full of platinum and rhodium. Origional cost was approximately $100,000. Untested Government surplus from a research project. Has been in storage several years. Appears complete but due to the complex specialized nature of this type equipment it is impossible for me to test, therefore it is being sold as pictured in as-is condition for parts ... moreor repair. This doesn't mean its broken, just that I am not able to test functionality. I may have access to several more of these units in time. Located near Fort Worth. TX Viewing welcome. Local pickup is encouraged. Because of weight of this item it can only be shipped truck freight. If you want it shipped, you the buyer are 100% responsible for making and paying for your own shipping arrangements from zip code 76112. I can deliver up to 100 miles radius of 76112 for $2.mile. Shipping weight is near 2800 pounds Size is about 6' long 40"wide and 6' tall. USA bidders only!
|
|
|