|
|
Order by: |
0 bids Free Shipping
Condition: New – Open box Location: , China
It will hurt us a lot. We apply comprehensive quality check and testing before dispatching.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New Location: , China
Silicone heater pad (1/pcs ). / GIS insulation cover / Nitrogen Bottle heater/ Food Kitchen Pizza Heating Pads. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: , China
102 X 152mm. with built in 90C Thermostat. - CE / UL Certified Heater with One Year Warranty! - Holes / Eyelets can be added on heater upon request, NO Extra Cost! with 3M adhesive backing. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: Liberty, United States
Acetylene Cylinder Compression Gas Valve CGA 520 3/8" -18 NGT. HOLE 6/8"WIDE TOP, LEFT HOLE 5/8".
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
THREADS:MALE 3/8" O-RING TO MALE 3/8" O-RING VIA 1/2" NPT. Feel free to ask us about conversion kits for almost anything, including trucks, cars, generators, tractors, boats, motorcycles, RVs, etc. We can build a kit to convert almost any engine!
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
THREADS:FEMALE 3/8" O-RING TO FEMALE 3/8" O-RING VIA 1/2" NPT. 3/8" FEMALE O-RING EXTENSION. Feel free to ask us about conversion kits for almost anything, including trucks, cars, generators, tractors, boats, motorcycles, RVs, etc.
0 bids Free Shipping
Condition: New Location: Millersburg, United States
4- 1/8" OD. 0.56" stem OD. Lift Tables. Available on select orders within USA lower 48 states. Model 71655. Part Number 71655. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
I bet we answer the phone. It can also make fuel pellets from soft biomass materials like leaves, grass, pine needles, or juniper.
Buy It Now
Free Shipping
Condition: New Location: Oklahoma City, United States
NEW - Kioshi CNG Storage Tank Type 1 -. Tank inspection sticker current 3 Years or 36,000 Miles. (14x59") - 10.9 GGE rated at 70 degrees F.
Buy It Now
Free Shipping
Condition: New – Open box Location: Brooklyn, United States
See picture.
Buy It Now
$10.00 Shipping
Condition: New Location: , China
Manufacturer Part Number:Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. 1 x 3928161 R290 SA-4293-24V. Diesel Fuel shut off solenoid valve. Work volt : 24V. Unique Characteristics:Direct in fuel pump.
0 bids $12.39 Shipping
Condition: New Location: , China
Fuel Shutdown Shutoff Stop Solenoid Valve. Other Reference No.: Woodward 2300-1503. Application: Woodward 2300-1503. Maintenance service: repairing for monitor, ECU computer and hydraulic pump; monitor hours resetting, etc.
0 bids Free Shipping
Condition: New Location: , China
Engine Oil heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! - CE / UL Certified Heater with One Year Warranty!
0 bids Free Shipping
Condition: New Location: , China
Silicone heater pad (1/pcs ). / GIS insulation cover / Nitrogen Bottle heater/ Food Kitchen Pizza Heating Pads. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
Buy It Now
Free Shipping
Condition: New Location: , China
Application: Fits For Ouman D59-105-04 Engine. Title: Solenoid Valve.
0 bids $18.00 Shipping
Condition: Used Location: , Canada
Fuelmaker FM4 natural gas vehicle fueling appliance rear top vent cover-good condition-missing I tab.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
APPLICATION: 51828 9-volt wire extension. Common Repair Part for the Algas Direct Gas-Fired LP Gas Vaporizers.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New – Open box Location: Lockport, United States
We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose. We did our diligence cleaning this item, but this item can still use a good wipe upon receipt.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
THREAD:2" MALE NPT. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. APPLICATION:Bulk Tank Full Internal Relief Valve.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
I bet we answer the phone.
Buy It Now
$12.99 Shipping
Condition: New Location: Vaughn, United States
Caterpillar CAT Fuel Shutdown Solenoid 155-4651 8C-3664 12 Volt stop solenoid.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
POL CONNECTION. DIP TUBE: 10.7" LENGTH. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. MANUAL BLEEDER VALVE.
0 bids $8.75 Shipping
Condition: New Location: Clovis, United States
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
LB36 QUICK CONNECT. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. Feel free to ask us about conversion kits for almost anything, including trucks, cars, generators, tractors, boats, motorcycles, RVs, etc.
0 bids $45.00 Shipping
Condition: Used Location: Calumet City, United States
0 bids Free Shipping
Condition: New Location: Millersburg, United States
Lift Tables. Available on select orders within USA lower 48 states. Model 71655. Part Number 71655. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New – Open box Location: , China
It will hurt us a lot. We apply comprehensive quality check and testing before dispatching.
0 bids Free Shipping
Condition: New Location: , China
Installed NTC100K thermistor. NO Extra Cost! - CE / UL Certified Heater with One Year Warranty! - Holes / Eyelets can be added on heater upon request, NO Extra Cost! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
Buy It Now
$4.49 Shipping
Condition: New Location: , China
Title: Fuel Shutoff Solenoid Valve. Application: Fits For Woodward.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
I bet we answer the phone.
0 bids Free Shipping
Condition: New Location: Cumming, United States
New Inflex ~80L CNG tank with bracket kit
0 bids Free Shipping
Condition: Used Location: Lockport, United States
This item is used. Was changed out by NYS and was in working condition when removed from service. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
APPLICATION:Removal / Installation Wrench Tool 2" MPT Full Internal Relief Valve. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm.
0 bids Free Shipping
Condition: New – Open box Location: New Bedford, United States
Spinner ll oli centrufuge. MODEL 3400.
0 bids $35.00 Shipping
Condition: Used Location: Plattsburgh, United States
MPN 16 PUCK. Manufacturer's Warranty and Support DO NOT apply. We will work with you to resolve any issue as quickly as possible. We are NOT Authorized Distributor of this item.
Buy It Now
Free Shipping
Condition: New Location: Chicago, United States
812010 True V-Belt, A6R12-2L290 For Rgs Genuine OEM TRUE812010.
0 bids Free Shipping
Condition: New – Open box Location: Moultrie, United States
All products are sold without an existing warranty. Be sure to see our full inventory of Rosemount, MicroMotion, Yokogawa, Allen-Bradley, Endress Hauser, etc. UNLESS OTHERWISE STATED.
Buy It Now
Free Shipping
Condition: New – Open box Location: Albuquerque, United States
New in original factory sealed packaging, but does not include original box.
Buy It Now
$12.99 Shipping
Condition: New Location: Vaughn, United States
Part # 01181663. Deutz KHD BF4L913, F4L913, BF6L913 Engines. LarryB's Fuel Shut-Off Solenoid.
0 bids Free Shipping
Condition: Used Location: Lockport, United States
This item is used. Was changed out by NYS and was in working condition when removed from service. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
POL CONNECTION. DIP TUBE: 10.2" LENGTH. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. MANUAL BLEEDER VALVE.
0 bids Free Shipping
Condition: Used Location: Lockport, United States
This item is used. Was changed out by NYS and was in working condition when removed from service. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale.
0 bids $24.00 Shipping
Condition: Used Location: , Canada
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm.
Buy It Now
Free Shipping
Condition: New Location: Oklahoma City, United States
NEW - Kioshi CNG Storage Tank Type 1 -. Tank inspection sticker current 3 Years or 36,000 Miles. (14x34") - 5.8 GGE rated at 70 degrees F.
0 bids $12.50 Shipping
Condition: New – Open box Location: Chillicothe, United States
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
APPLICATION:REPAIR KIT FOR THE IMPCO MODEL PEV-2 REGULATOR.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
Make your own biomass fuel pellets (not wood) or animal feed pellets. It can also make fuel pellets from soft biomass materials like leaves, grass, pine needles, or juniper. A die puller and an allen wrench are included.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
APPLICATION: 37503 Re-Igniter 9 Volt Module. Common Repair Part for the Algas Direct Gas-Fired LP Gas Vaporizers.
0 bids Free Shipping
Condition: New Location: Bakersfield, United States
Part # A26223 Wolverine Advanced Simplex Chemical Injection Pump, 12VDC, 1/5HP Motor 1/4, FFKM Seals, runs off solar energy.
Buy It Now
Free Shipping
Condition: New Location: Danville, United States
0 bids Free Shipping
Condition: New Location: 松江区, China
102 X 152mm. with Built In 90 Degree Thermostat. - CE / UL Certified Heater with One Year Warranty! - Holes / Eyelets can be added on heater upon request, NO Extra Cost! with 3M adhesive backing. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
Buy It Now
Free Shipping
Condition: New Location: Miami, United States
Sheets per Unit: 5.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
A die puller and an allen wrench are included. The 4hp electric motor runs on standard 220 volt 60hz single phase power. Make your own biomass fuel pellets (not wood) or animal feed pellets.
0 bids Free Shipping
Condition: New Location: , China
JSRGO@ quality are among the highest in the industry. It features Strength, Flexibility. 200 X 200mm. - CE / UL Certified Heater with One Year Warranty! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: , China
152 X 254mm. With 3M adhesive but can produce it without 3M. - FAQs, All Size Database, Installation Guidance can be found on our Website. - Holes / Eyelets can be added on heater upon request, NO Extra Cost!
|
|
|
Fully Refurbished SPROUT WALDRON 501-D PELLET MILL W/ 12"X56" CONDITIONER. SINGLE SPEED 36" PULLEY V BELT DRIVE AND 100 HP MOTOR. If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model will be fu lly refurbished befor e it is shipped to you. Please allow 4-6 weeks for full refurbish. Please ask about international shipp ing. This model includes feeder. C onditioner. Roll shells, and motor. The only thin g left is your die(we can quote you this as well. And may have one in stock) C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have ... morethe experience to help you with all your equipment needs. Experience the Continental Agra difference! What makes our equipment better than the rest? We use only the finest materials and parts in our equipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive products on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
|
RECEIVED AS SURPLUS Manufacturer: LAB-VOLT MODEL# TD-40036-OC- THIS IS A WORKING UNIT HOWEVER THE BATTERY IN THE TIMER NEEDS TO BE REPLACED- GUARANTEED WORKING
|
|
|
99 Renault Clio B- SIMENS ECU 99 Renault Clio B- SIMENS ECU HOM7700867270 tested at working condition Posted with k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-140eba73d38-0xe9-
|
|
|
99 Renault Clio B- SIMENS ECU HOM7700102886 tested at working condition Posted with
|
|
|
99 Renault Clio B- 99 Renault Clio B- Alternator tested at working condition Posted with
|
|
|
Selling a Used GFI Compuvalve unit that came off a 2001 Ford F-150 truck. The truck was upgraded to a new system and this Compuvalve was taken off the truck. I have NO way to test the unit so it will be sold AS IS with NO guarantees! I know that the parts alone are worth a lot and if unit does work its worth thousands! Pictures will show numbers of unit if you need to match them up. NO Returns! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1431788ecbe-0xfb-
|
|
Product Specifications. Brand: LUBE DEVICES, Condition: Used, Model: 161, Weight: 1 lbs, Dimensions: 9 x 3 x 4 in, SKU: B314465, Category: Miscellaneous, Additional Notes: GRAVITY LUBRICATOR RESERVOIR 3/8 IN NPT, Product Photos. $20 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship our items within 1 to 2 business days of receiving payment. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only ship ... morethrough UPS. Collect shipping must be through your UPS account. If the item is to be shipped on a skid please contact us for a competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your eBay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence. We put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer hassle-free refunds! All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. If you receive an item that
|
|
NEW Surplus Stock. SEE Surplus Section Below! No Instructions. No Factory Box, No Factory Wrapper Please Know What You Are Purchasing Returns Are For D.O.A. Only FACTORY REFURBISHED GFI Compuvalve V9-900 R1-161 ecs Untitled Document Payment. Paypal. And Cash on local pickup. Payment on buy it now must be made Immediately when you Buy. Local pickup must be paid in cash when item is picked up. Shipping. Handling time is 1 day. I try to ship same day if I can. But it will for sure ship next business day. If a delivery confirmation is confirmed by USPS or UPS. That is considered DELIVERED! If someone steals it from your door step or mailbox it's on YOU. I only cover packages NOT delivered. Many people try this scam and I do NOT send you another item or refund your money. If you live in a bad ... moreneighborhood I suggest you get a PO box. If you want it sent with a signature required. Let me know when you order. Although I do drop packages off at the post office on Sat. Sun. sometimes the large package drop box is full or the package is too big. In those cases I will take them Monday Morning. I do this because I know you will get it faster! USPS Or UPS Tracking Number will be provided. I video every packing of each item showing my security seals and the shipping label and showing how each item is packed. I video the opening of return items. Free Shipping is to lower 48 States Only. Unless otherwise noted in the listing. Alaska/Hawaii. US Protectorates, APO/FPO Email me your address info and I will give you a shipping quote. Surplus Items. Surplus items may have shelf dust. Dirt, scratches etc(LOOK at ALL the Pictures) Boxes or packages may be open. Cut open, or may not include original packaging. Labels may be faded. Plastic packaging may be cracked. Items may or may not have factory paperwork or packaging. Ask any questions before you buy. All sales are final for cosmetics or packaging. Warranty. I will 14 day Warranty against DOA. DEAD ON ARRIVAL ONLY. If a replacement item is available. You choose refund or rep
|
|
|
This unit was set up to demonstrate the generation of electricity using biomass as a fuel source. It currently has about 15 hours on the system. This sale consists of a Calnetix 125 KW generator(currently owned by GE) A 3 Million BTU Energy Unlimited Inc solid fuel furnace, solid fuel storage hopper, fuel metering hopper, three heat exchangers, induced draft fan, all plumbing, starters and PLC controls to operate the system. This unit is designed to be attached to the grid. The generator can be operated for any prospective buyer. The price includes loading on your trucks. A $2.000 payment through PayPal will be required if you are the winning bidder. The final payment must be made before loading the equipment. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14402079510-0xf3-
|
|
These Francis turbines are made of durable cast iron and have heavy gage runners. Some units were rebuilt with stainless steel hardware. The pictures above show a unit after it has been cleaned up and the runner painted. The picture with the backhoe shows a unit before cleanup and paint(the way they are offered) There are 14 runner blades and 12 wicket gates. The gates are 18” tall and the crown plate is about 65” in diameter. I designed a complete operational system around these units. My system includes the main shaft, thrust bearing, upper guide bearing, sheaves, main frame, gate operator, sheaves, timing belt and generator. My system is installed with 14.5’ of head and produces about 110 kW with about 125 cfs at 155 rpm. I have it coupled to a 900 rpm, 480V, 150 HP induction motor used ... moreas a generator. I have the manufacturer’s tables to determine output power at various heads. For another point of reference, it would produce around 180 kW at 20’ of head. I have all the electrical and mechanical drawings to make a working system, which I will consider selling under the right circumstances.
|
|
Author: Edward J. Walsh Year: 1981 Subject: Natural Resources in Latin America Type of Publication: Educational Geared Towards: Everyone Pages: 16 Cover: Lightweight Cardstock Flaws: Some spots. Mainly on the front and back covers. Some framing on covers. A few spots on some pages. Binding: Saddle Stitch You are bidding on one booklet that's a short. Quick read but gets you thinking. Mr. Walsh introduces the reader to the energy crisis we experience in the US, and leads us to untapped resources in Latin America as an alternative. He unveils minerals that are available in Jamaica, Brazil and Argentina and more and tells how some of our imports could be sourced so much closer to home. It's an eye opener. It makes you wonder why we've never taken advantage of these resources so close ... moreto home. The cover of this booklet is white with black and brown print and the inner pages are black and white. The booklet is in very good shape except for the covers which have some framing and spotting but are still very much in tact. The book measures 5.5" x 8.5" If you have questions. Just ask. These come from a non-smoking home. Thanks!
|
|
Cosmic Rays. Gamma Rays, Safety, Chernobyl, Fukushima, Research, Astronomy: National Nuclear Model DM-2 Pedestrian Portal Gamma-Ray Detector High Sensitivity Low Cost to Operate Reliable. HUGE Scintillator- Mount on your Jeep to quickly explore W. US for U deposits to stake a claim like Vernon Pick did. Why not? Documented use at labs. Power stations, and many other locations. We have several highly informative and publicaly available.pdf papers. Make your request on your letterhead and we will send. PLEASE NOTE: We have NOT tested these due lack of means to do so. We make no claim as to suitability for ANY intended use. May require repair or refurb. However PMT's are inexpensive to replace. And scintillator materials are, we believe, highly stable non-biodegradable plastics, good for ... morecenturies. AS Lakoff wisely says: Do NOT think Fukushima! either there or along W. Coast of CA) Scintillation Plastic = 2"x 62"x 11"Wide = 1364 in3 Power PMT Supply = 1600vdc. Adjustable voltage, regulated x Directional = Lead Lined on 3 sides Detector = PMT Weight. Ea. = 160-300kg = 350-660lbs(depending upon thickness of lead shielding References: G. W. Clark"Applications of Large Scintillation Detectors to Cosmic-Ray Experiments" IRE Trans. Nucl. Sci. vol. NS-7, pp.164 1960 Free Loading into Your Carrier's Truck We exert our utmost to assist you in loading. Crating, and if needed. Locating an economical and reliable shipper and appropriate insurance. Full Service" management of Crating. Insurance, and Shipping for a 12% fee over actual cost We require a 10% deposit in order to hold an item for you. Questions? Ed.m@lasermotion.com. 510-427-0115 Best Description we found: there is much technical info on the web- just take some time to look) Of interest at universities. Gov labs, and research organizations looking, for example, at cosmic rays, etc. SEE: http:www.osti.gov/scitech/servlets/purl/10108517] B. National Nuclear Corporation DM-2 Doorway Monitor. 1. Physical Characteristics and Operation
|
|
|
Used Cat# F-30 Manufacturer: CruzPro Add. info: Inspected& Tested Item: Fuel Gauge Condition: Used Location: 1L15-C- JR Posted with
|
|
I'm selling everything you need to run your car on vegetable oil. Greasecar kit. Settling/heating/filtering system, and(the hardest thing to find) SOURCES! I've been running Jetta and Golf TDIs on WVO since 2006. After 8 years and 70.000 trouble free miles, my wife totalled her Jetta. I no longer have the enthusiasm to keep up with the project with just one car and so I'm selling the whole shebang. I already sold the Jetta kit. I collect the WVO and settle it in cubies. I pour it into the blue drum(see picture) through sock filters hanging in the top of the drum. Leaving the sediment in the cubie. The hot water heater element in the drum brings the oil up to 130°, thermostat keeps it at that temp for as long as you want. There is a stand pipe in the bottom of the drum to suck ... moreoil from above the bottom of the drum through a Goldenrod Water Block filter and a Whole House water filter. It then pumps into the tanks seen on top of the racks. A hose running from the tanks gravity feeds for fill up in the garage. All valves, plumbing and temperature gauge are included. I have one extra Goldenrod filter and 9 sock filters. Switches and water pump are included. Marine grade 1" macerator oil pump with hose is included for collection. Two locking 55 gallon oil drum tops are included. The used Greasecar system I have consists of the tank that fits in the spare tire well(24" diameter) Heated fuel filter housing and head, switches, 2 solenoid valves, temp gauge, fuel gauge. Original Greasecar installation manual is included. Hoses for the Greasecar kit are not included. They are readily available and you'll need particular lengths for your car. All the"how to" guides about running on WVO say Step#1 is LOCATE YOUR SOURCE. I'm selling sources for 70 gallons/month along with the system. There is no contract but they have been providing me for 7 years and show no inclination to change as long as they continue to receive good. Reliable service. Obviously. I'm not mailing this system
|
|
1929 Seaboard by Product Coke Co. Clifton NJ Kopper's Coke Booklet Heating Fuel. Staples are rusted so pages are loose and has interesting pictures. 28 pages and cover has edge wear and 1" tear top of binding. Ask anymore questions. TERMS I offer 2 shipping options. To see both prices. You need to click on"see details" at the shipping charge. If your item needs special handling and materials. We need time to purchase them, and it may take a little longer for you to receive your item. All of our items are sold"as is" We state the condition of all of our items to the best of our knowledge. Any electronic items we sell are"vintage" or pre-owned. So there are no guarantees or warranties. PLEASE, WE STRONGLY ENCOURAGE ANY QUESTIONS BEFORE BIDDING! WE ARE NOT ... moreEXPERTS ON ANY OF OUR ITEMS WE SELL HERE ON EBAY. Any clothing that we sell are preowned or new with tags from within our family. Most vintage items are cleaned on the exterior before the pictures are taken. We do not open up or clean any new working items. BEFORE LEAVING A NEUTRAL OR NEGATIVE FEEDBACK. PLEASE CONTACT US FIRST. WE ARE VERY WILLING TO DISCUSS PROBLEMS AND FIX THEM. IF YOU ARE PATIENT WITH US, THEN YOU WILL GET THE SAME SERVICE. Thanks for looking! Have a great day! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
PhotoBioReactor Glass Tube PLEASE READ THE FULL DESCRIPTION By bidding on this item you accept the terms stated below. Up for auction is a used PhotoBioReactor Glass Tube 3" ID. 21" Height. This device is in fair cosmetic condition with scratches in the glass and signs of use. Please refer to the pictures provided below for more details on the condition of the item. We are unable to test this unit. This item was purchased from surplus. We see no outward reason that it will not function fully. However. Given that the we cannot test it, this device will be sold as-is. We will not accept returns for this auction if it does not work to your satisfaction. By bidding on this auction. You are taking the risk that the item may not work. Only those items shown in the photos will be included ... morein the auction. ATTENTION INTERNATIONAL BIDDERS: Import duties. Taxes, and Customs charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. It is illegal to falsify customs documentation by changing the value or marking items sold as"gift" We will not accommodate any such requests. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011- 26670. Powered by
|
|
|
NORWALK COMPRESSOR SERAIL# 50458 TYPE- TDR-S3T PRESSURE-340 DATE 5-25-1989 SIZE 16X12 SERVICE DIGEST. GAS RPM-215
|
|
|
SUPPRESSED INVENTIONS and how they work PLUS Secrets of the 200 MPG CARBURETOR. You get both rare hard to find out of print books.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-145c1101584-0x118-
|
|
DISPLAY BATTERY CHARGER MARINER VENTURA? BIN#37 Sold as is. Thanks. TERMS OF USE Welcome to our SILO Ebay store. Please. Review our terms and conditions, which has the purpose to clarify and help for a better business relationship with our customers. If you do not agree with any part of our company policies, please do not do any bidding in our items. IF YOU PLACE A BID IN OUR ITEMS We’ll consider that you have agreed to all the following Term of Use. ITEM CONDITIONS: Please. Make a thoroughly inspection of the photos, description and conditions of each item you are interested, before placing your biding. SILO attempts to be as accurate as possible. However. SILO does not warrant that product descriptions or other content is accurate, complete, reliable, current, or error-free. If a product ... moreoffered in our store is not as described, your sole remedy is to return it in unused condition. DISCLAIMER: Many of our items are previously USED products or REFURSBISHED. Therefore they are sold“with all faults” or“AS IS” unless otherwise specify in writing. The condition of the item is provided in the“ description” RETURN POLICY: Our goal is to provide our customer with the best option for their needs. If you need to return item this rules will apply: We offer the buyer a two weeks(14 days) right to return the item. The buyer will be responsible for the cost of packing and shipping the item. Items MUST BE returned for any Refund. We do not offer partial refunds. Refunds will be given as money back. WARRANTIES OR RETURNS: NO WARRANTIES ARE EXPRESS OR IMPLIED. Items that are supposed to be operational according to the description in the listing can be returned if they are D.O.D. Items that are untested or are sold‘AS IS’ can not be returned. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: All ITEMS OR PRODUCTS LISTED IN OUR EBAY STORE ARE PROVIDED BY SILO ON AN"AS IS" AND"AS AVAILABLE" BASIS. UNLESS OTHERWISE SPECIFIED IN WRITING. OUR SILO STORE MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRE
|
|
PARKER PNEUMATIC VALVE 150 PSI BIN#37 Sold as is. Thanks. TERMS OF USE Welcome to our SILO Ebay store. Please. Review our terms and conditions, which has the purpose to clarify and help for a better business relationship with our customers. If you do not agree with any part of our company policies, please do not do any bidding in our items. IF YOU PLACE A BID IN OUR ITEMS We’ll consider that you have agreed to all the following Term of Use. ITEM CONDITIONS: Please. Make a thoroughly inspection of the photos, description and conditions of each item you are interested, before placing your biding. SILO attempts to be as accurate as possible. However. SILO does not warrant that product descriptions or other content is accurate, complete, reliable, current, or error-free. If a product offered in ... moreour store is not as described, your sole remedy is to return it in unused condition. DISCLAIMER: Many of our items are previously USED products or REFURSBISHED. Therefore they are sold“with all faults” or“AS IS” unless otherwise specify in writing. The condition of the item is provided in the“ description” RETURN POLICY: Our goal is to provide our customer with the best option for their needs. If you need to return item this rules will apply: We offer the buyer a two weeks(14 days) right to return the item. The buyer will be responsible for the cost of packing and shipping the item. Items MUST BE returned for any Refund. We do not offer partial refunds. Refunds will be given as money back. WARRANTIES OR RETURNS: NO WARRANTIES ARE EXPRESS OR IMPLIED. Items that are supposed to be operational according to the description in the listing can be returned if they are D.O.D. Items that are untested or are sold‘AS IS’ can not be returned. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: All ITEMS OR PRODUCTS LISTED IN OUR EBAY STORE ARE PROVIDED BY SILO ON AN"AS IS" AND"AS AVAILABLE" BASIS. UNLESS OTHERWISE SPECIFIED IN WRITING. OUR SILO STORE MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPL
|
|
BoreMaster ZX-1000 Industrial Commercial Water Swivel. 12 Volt Power Winch With Remote Control, Wide Heavy Duty Gripping Platform, 13-1/2” Tires, Built-In Battery& Tool Tray. The Platform design grips the ground for any slope. Features a single beam adjustable mast(adjustable from zero-vertical to 45 degrees for perfect borehole alignment) Heavy Duty I-Beam Mast. Can be used to bore holes for Geo-Thermal drilling. Includes: Drilling Rig/ 12V Winch with Remote Control. 100 ft. Commercial wide tread drill stem(1-1/2” I.D. 2 Heavy Duty Carbide Bits. 4-1/2” 6-1/2” Mud Pump 12000 GPH with holes. BoreMaster ZX-1000 With 13Hp Gas Engine. Ad Placed on BESTFARMBUYS.COM. Industrial Commercial Water Swivel. 12 Volt Power Winch With Remote Control, Wide Heavy Duty Gripping Platform, 13-1/2” Tires, ... moreBuilt-In Battery& Tool Tray. The Platform design grips the ground for any slope. Features a single beam adjustable mast(adjustable from zero-vertical to 45 degrees for perfect borehole alignment) Heavy Duty I-Beam Mast. Can be used to bore holes for Geo-Thermal drilling. Includes: Drilling Rig/ 12V Winch with Remote Control. 100 ft. Commercial wide tread drill stem(1-1/2”ID) 2 Heavy Duty Carbide Bits. 4-1/2” 6-1/2” Mud Pump 12000 GPH with holes. 6" Heavy Duty Post Hole Digger Can be seen on@ I used this rig for my own well three years ago and it worked just fine. I haven't had a use for it since other than I have been using it for drilling fence post which it works great for. I bought a post hole bit which I will include with it. Here is a link to the bit it's a 6"bit only) This rig would be great for Geo-Themo installations. Where drilling with a large truck rig would not be possible in backyards. Everything is in working order however the 8" bit that came with the rig is not available and would have to be purchased by the manufacture. If you would like pictures of the rig itself contact me and I will send them to you. I don't currently have any that's why I included the manufactures stock pi
|
|
|
Type 2 CNG cylinders deliver the highest impact strength in the class of fiber reinforced cylinders. This new breakthrough option for commercial CNG’s users is the result of innovative production technology. Where lightweight steel liners are wrapped with a proprietary very high strength steel wire, sealed with a special epoxy and covered with a protective mesh. Specs: Capacity 98 liters/22 gallons, Size 40"x16" and weight 81.9kg/180lbs. This Compressed Natural Gas can be used with combustion engines to improve gas mileage or used specifically to have zero emissions vehicle.
|
|
|
For sale are CNG fuel delivery parts from a 2001 Ford F-150 Bi-fuel truck. The system was working sporadically when removed 2 years ago. The compuvalve was rebuilt by a company in Oklahoma shortly before I removed the factory CNG system. The pressure regulator worked properly. These parts are for sale AS IS. The winning bidder will receive the parts shown in the pictures.
|
|
|
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! These Are All Great parts that will fit about any Perfection Heater Burner. There are 2 All BRASS Fuel Gauges that work flawlessly in any Perfection Heater nice and shiny look like new.There is 1 Round Rotunda that screws down over wick is good with very good threads 1 Flame Spreader.Is nice and ready for use, 2 Burner Lifting Handles and 1 Filler Cap. Happy Bidding on these nice parts For Perfection Heaters.THKS Rob
|
|
MCH5 CNG Compressor These compressors are built to the highest standards. All parts are easily available. There is no expiration on these units because if it is cared for and all scheduled tune ups are preformed in a timely manner they just keep on pumping! Some in the cng network have well over 50,000hrs on there well maintained machines and are extremely happy. Iam only selling this unit due to the fact that my family put a large fast fill station on our land so I just use that now. As you can see from the service receipt I have only run the unit a couple hundred hours since its full scheduled service back in august of last year. The current oil in the machine only has about 5 hours on it so you wont need to touch a thing for quite some time. These units are a bit pricey if you have been ... morelooking, however this is a chance to get the unit at a fraction of the cost due to my situation/ access to a fast fill less than a mile away. As far as shipping is concerned if you are willing to come pick it up I have a machine ready to load the unit on to your truck or trailer. I am also willing to put the unit on my truck and haul it to the nearest trucking terminal, however the buyer will be responsible for all shipping costs. Thank you! The smallest of the Coltri Family of CNG Compressors. The MCH 5 reliably and cost-effectively delivers the ideal amount of CNG for use in Ice Resurfacers serving Single Pad Arenas, Fork Truck Fleets of 4 vehicles or less, independent contractor service fleets of 2-4 vehicles, or as a Home Fill Kit for the daily long-distance commuter seeking fuel cost savings. TECHNICAL SPECS, CHARGING RATE: 85 L/min- 5 m³/h- 3 CFM, FILLING TIME TANK 80 Liters(Kg 11.5) 0/200 Bar: 3 h, WORKING PRESSURE: 200 Bar- 2900 Psi or 250 Bar- 3800 Psi, DRIVEN BY: single-phase electric motor(Atex certified Zone 2) POWER: single-phase 3 Kw(230V- 50/60Hz) DIMENSIONS: height 105 cm/ 41.3" width 70 cm/ 27.5" depth 67 cm/ 26.3" DRY WEIGHT: 160 Kg/ 352 lbs, NOISE: 65 dB(at 1 m distance) N° STAGES AND
|
|
|
A.C VOLTS 120/240 Phase: 1 KVA: 4 KW: 4 PF: 1 AMPS: 16.7 Hz: 60 RPM: 1800 Bat: 120 That's what's on the tag Sold as is Worked when took out Transfer switch come with Talk to me for a shipping quote
|
|
|
Low hours. I believe it is in the 0-500 category when I checked. It is not working, and I was told it needs some kind of a software update. I live in San Diego, and they told me it would cost $400 to come down from LA to do the work. I have another pump, so I will leave it to the next owner. When it stopped working, I replaced the key pad in the hope that would fix it. No go. It is stuck in the dry mode and will not come out. The unit comes with the custom galvanized outdoor stand that I made for it. Pick up only. For more information call Pete at 858-945-5710
|
|
|
Parker Parflex- 1/4" I.D. Fill and Vent Hose Combo. 5000 PSI Length: 14ft.
|
|
|
Up for sale is a CNG fuel fill valve off my 2001 Ford F-150 Bi-fuel truck. The CNG system never let me down in the time I have owned the truck(since 2009) BUT the truck will not start with a cold engine on CNG. It needs to run for 15 or so minutes until the system will start on CNG. The system has been this way as long as I have owned the truck. Last time I filled/used the system was some time last summer(2013) The system is pretty much bone dry of CNG(closest filling station is 45+ minutes away) but there was enough to start/run the truck in Alternative mode today(6-1-14) Sold as-is. NO guarantee of DOA. As of now the entire system is compete on the truck. Feel free to contact me if you need other used parts. Free shipping
|
|
Click on pictures to enlarge LOCAL PICK UP IS AVAILABLE AT NO COST Item Details: MAKE: AVISTA LABS MODEL: SR-12 MODULAR PEM GENERATOR CONDITION: USED/ WORKING Comes as pictured Warranty:Guaranteed against DOA Lister 13452 3/10/2014 Payment Details: We accept payment through Paypal. PayPal provides fast and secure transactions. We ship to confirmed PayPal address. No Checks or escrow. Canadian buyers are responsible for all custom- brokerage- GST and PST charges Shipping Information: We usually ship within 1-2 days after payment has been received. We allow FREE local pickup please call at 720-840-6045 or 303-521-3869 to arrange pickup. Our address for pickup is SUM Computers Inc. 4945 Monaco St Commerce City CO 80022 Warranty Information: All items come with non DOA(Dead on Arrival) warranty ... moreunless stated otherwise. If the item arrives damaged please let us know and we will file a claim with the shipping company. Sorry we do not offer any warranties on the batteries software and operating system issues. Feedback and Contact Information: Our system is automated and will leave positive feedback upon receiving positive feedback. Please contact us if there are any issues with the item. Please give us an opportunity to resolve the issue before leaving any bad feedback. We try our best to explain the item with utmost accuracy but sometimes there are human errors. Please do not hesitate to email us with any questions or concerns. Why Buy from US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This natural gas unit serviced a 136.000 square foot building, lights computers, everything. Can be converted to propane. Built in 2000, only had 118 hours on it, serial number is 68608-1-04-00, model number is LRG-425I-6005-A, weighs 700-800 pounds, and is on a pallet, can be picked up, or shipped freight, don't know what freight cost would be.
|
|
|
Removed from 98 Ford Contour Mileage: 53k Condition: Used.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146a850b055-0x10c-
|
|
|
Up for sale is a CNG fuel pressure regulator off my 2001 Ford F-150 Bi-fuel truck. The CNG system never let me down in the time I have owned the truck(since 2009) BUT the truck will not start with a cold engine on CNG. It needs to run for 15 or so minutes until the system will start on CNG. The system has been this way as long as I have owned the truck. Last time I filled/used the system was some time last summer(2013) The system is pretty much bone dry of CNG(closest filling station is 45+ minutes away) but there was enough to start/run the truck in Alternative mode today(6-1-14) Sold as-is. NO guarantee of DOA. As of now the entire system is compete on the truck. Feel free to contact me if you need other used parts. Free shipping
|
|
|
SOLENOID CONTROLLER 110 VOLT. WORKS GOOD WITH WORKING SOLENOID HEAD.
|
|
|
Has less than 200 hours on it. Older model but like new condition. They don’t make them like this anymore! Sold with the 500 gallon diesel tank. Located in Ijamsville. MD, minutes from Frederick, MD. Local pick-up only.
|
|
|
Mid to late 1990s Vaillant F75-W-45 PP Oil-Fired Boiler. Heats baseboards great. Heater coil needs replaced for maximum flow of hot water to faucets. Local pickup only. Purchaser to help remove from our basement.
|
|
Up for auction is a prototype board designed for use with DC electric vehicles. This is actually a functioning board(we recently used to drive a 4000-pound electric vehicle on the highway) but it is being sold for development purposes only. This board was developed for a customer and is based off an old EP-1000 motor controller board(a 1000-amp. 300V controller) This board accepts an Atmel ATMEGA-328 processor(16-bit) The processor has been removed, but we are including a blank one with the board. There is also a small 8-pin processor installed on the board that has software pre-loaded on it. This software should drive a car just fine, if you want to use it for testing/experimental purposes. The board has a 12-amp IGBT driver built in. Which will easily drive two 600-amp IGBT modules up to ... more10 kHz, or one to about 20 kHz. The board also has room for a second driver, which will allow you to run additional modules. The IGBT driver has built-in fault and short-circuit protection, which prevents damage to the IGBT modules if you over-current them, or short the output terminals on the controller. For tech questions, please email or call 508-923-9503.
|
|
Methanol& Other Ways Around The Gas Pump book Lincoln 1976 alternate energy METHANOL& OTHER WAYS AROUND THE GAS PUMP 1976 ALTERNATIVE ENERGY GUIDE NICE SOFT COVER BOOK IS IN VERY GOOD CONDITION MINIMAL SOILING COVERS& SPINE ARE IN VERY GOOD CONDITION PAGES INTACT 50 CENT WRITTEN ON FRONT GREAT COLLECTIBLE! ~~ Share the passion ~~ ~~~ Get a youngster into collecting( ANYTHING) You will ignite a fire. they will thank you! ~~~ Thank you for your consideration. Please read description. See photos and ask questions before bidding! YOU will be the judge of what the item is worth to YOU& bid accordingly. Refunds only if listing description is inaccurate. I am not an expert. I get items from estate sales and auctions. PLEASE ask questions! I do not attempt to clean or repair any item. ... moreJust movin' them along. You will get it like I got it: DUSTY, RUSTY I gladly combine shipping to save you some money! If you win multiple auctions please email me BEFORE sending payments so I can adjust your shipping cost. PLEASE consider SHIPPING INSURANCE. As I have no control over delivery once I give it to the Post Office folks. Here at Luna Creek Mellow Antiques we try to recycle as much as possible. Not only our products but the boxes and packing material used to ship them. It's good for the earth and it just makes sense. Adding items all the time. Check back often. Great stuff is just a click away!
|
|
|
HOBART ARC WELDER Portable Generator 10.000 Watt Generator Champion Line, 20 used hours(approx.
|
|
|
Electric Vehicle Hats- LaMode Black with Nev Logo on it. Gemcar logo
|
|
|
I AM SELLING ALL BRAND NEW CONDITION PARTS THAT INCLUDE A 15 HP PEAK 48 VOLT 5000 WATT DC MOTOR MOTENERGY ME0909 WITH 13 TOOTH SPROCKET FOR 428 CHAIN SIZE. ALSO INCLUDED ALLTRAX NPX 4830 300 AMP CONTROLLER 24-48 VOLT PROGRAMMED FOR THE FASTEST THROTTLE RESPONSE AND THE 5K OHM THROTTLE WITH MATCHING GRIP FOR THE LEFT SIDE OF HANDLE BARS. I SOLD THE FRAME AND BATTERIES SHOWN IN PICTURE NOT INCLUDED IN AUCTION.THESE WILL SHIP USPS TO THE LOWER 48 STATES. Posted with
|
|
This lightly used 1999 model Gen-set is a Ready to run unit. It was taken out of service last month from a United States government facility. This unit has the Cummins 5.9 L 6BT engine. It is very clean and has some maintenance stickers on the back panel door that indicate it was serviced regularly. It appears to have been well taken care of. It only has 774 hours. The unit is also for sale locally and could possibly have been run since the photo in this listing which means it may have a few more hours on the meter. The unit cranks easily and purrs like a cummins should. It appears to have had a full preventative maintenance Oct. 2013 with regular periodic routine preventative maintenance until may of 2014. It has a day tank and by the information on the tank it appears to be a 173 gallon ... moretank. This unit was taken out of service because the fuel tank is a single walled tank. It was replaced with a unit that had a dual wall tank. This unit can be swapped from 3 phase to single phase relatively easily. This unit is ready to run. This unit is available for local pickup. I do have a forklift and will gladly load it for you. If you wish to have the item shipped from my location you will be responsible for procuring shipping. Thanks again for stopping by to take a look. Follow this link to a video of gen-set running. http:youtu.be/UtWFtJZrs9o Feel free to contact me if you have any other questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147b3d8a39e-0x10e-
|
|
Hydrofarm AAPA45L 20W 45LPM Active Aqua Commercial Air Pump/6 outlets- 024675. USED. FUNCTIONS WELL, IN VERY GOOD CONDITION, SOME MINOR COSMETIC ISSUES, ITEM MAY BE REPACKAGED OR ORIGINAL PACKAGE MAY SHOW WEAR NOT APPROPRIATE FOR GIFTS. JS ENTERPRISE SOLUTION– Electronics POLICIES Payment: We accept PayPal. Shipping: Where are we located& where do we ship? Item location: Reno. NV 89511 Shipping to: United States only. Excludes: Alaska/Hawaii. US Protectorates, APO/FPO. Tracking Number Confirmation: Tracking numbers will be emailed and uploaded to eBay immediately after the item ships. PO Boxes: Since JS Enterprise Solution ships with UPS. Please provide a physical address. If a PO Box is provided, your order will be delayed until a physical address is given. Terms of Sale: We deal with ... morereturned and overstock items. Many items are brand new or new in open boxes. However. We do sell many products that are defective or damaged in some way. Please read the description carefully for the item you are considering purchasing. View all of the pictures as they will portray the item as accurately as possible. Some items. Although New or Like New will not be shipped in their original packaging as this is due to wear and tear of the original packaging and is not practical to utilize for shipping. How do I Return My Item? When you purchase from JS Enterprise Solutions your item is guaranteed for up to 14 days. We believe in delivering accurate and quality items so we do not see many returns. However. The policy is in place if you ever have a change of mind or something goes wrong and shipping damages your product. Email or call us and answer any questions you may have. About Us: Thank you for your interest in JS Enterprise Solution on eBay! We are dedicated to bringing an endless variety of products to eBay and allowing our customers to determine the price by using the auction format or making an offer that we can't refuse on a"Buy it Now format" One of the biggest compliments we can receive is a repeat custo
|
|
|
Reli On Independence 1000 Fuel Cell for sale- excellent condition. Was part of our back up power system for our school since 2009, well maintained. Will produce 1000 watts of power at 48 VDC when supplied with hydrogen. We have three of these units available. Manuals are available also. Included are the hot-swappable fuel cell cartridges(six for each unit) Sold as is. Please feel free to email with questions.
|
|
|
Hardbound Book w/Dust Jacket: STEAM-ITS GENERATION AND USE. Edited by J.B. Kitto and S.C. Stultz. Published by The Babcock& Wilcox Company. 2005. First Printing of the 45th edition. Photos and illustrations. 900+ pages. Condition: only very minor wear. Shipping is $4.00 via media mail.
|
|
|
AIR PRODUCTS GAS PRESSURE REGULATOR E12-J-N1450 CGA MAX INPUT 3.000. PSI MAX OUTPUT 100 PS I SOLID BRASS CONSTRUCTION COST 169.00 NEW 30 DAY MONEY BACK GUARANTEE
|
|
|
I have a used Fuelmaker fueling unit FMQ 8-36. It is a complete unit with the remote control panel and everything was working when it was removed. Would be great for parts and supplies.
|
|
|
This auction is for 2008. ROTAX 912 ULS, 100HP in good cosmetic and working condition, with 140 hours total time in service.Engine is equipped with the slipper clutch and comes with the oil tank, voltage regulator, starter solenoid and the log book.
|
|
This tractor's build purpose was for power generation. Featuring 3 Horse power Mike Brown steam engine 2 cylinder double acting. Starts in any position. POWER GENERATION= Permanent magnet alternator 200 Volt DC variable with steam engine RPMs. AIR COMPRESSION= 2 Cylinder single stage 120 PSI DRIVETRAIN= Used rear end differential from used large truck. 5 Speed standard transmission used. Wheels 3 FOOT DIA X 1 FOOT Wide X1/2" Thick Solid Steel. BOILER= Heating Surface= 51.843 Square Foot All New welded construction. Hydro tested@ 250 PSI for 4 hours. Sight Glass. Safety blow off valve@ 150 PSI, Hand operated feed water pump. Approximately 20 gallon water stand by tank. This Boiler has been engineered to power a much larger steam engine) FIRE BOX= Brick lined designed to burn wood. ... moreThis tractor runs amazing I have started it many times to show friends and family. Please under stand this tractor's"MAIN PURPOSE" was for"POWER GENERATION" Tractive effort of this engine is low due to sizing of pistons.
|
|
Fuelmaker Model FM4 Natural Gas Vehicle Refueling Appliance This item was part of a bulk purchase of the contents of a manufacturing facility. We have no experience or knowledge of the installation. Operation, or maintenance of natural gas compressors. Therefore this unit is untested. If you have any questions at all about the unit, send us your questions, and we will do our best to answer them. We will also provide photographs of any specific part of the unit if it assists in answering any questions. If you wish to do a personal inspection of the unit, we are located in East Aurora, NY(Erie County- about 20 minutes Southeast of Buffalo) and we would be happy to accommodate appointments for inspection. We are offering local pickup at no cost(of course) and the unit comes with a wood shipping ... morecontainer(custom- not export certified- see photo) which is attached to a small pallet. If the purchaser wishes to have the appliance shipped via freight, we will load the appliance for the freighter of the purchaser's choice at no additional cost, but purchaser will be responsible for arranging and cost of freight service(UPS freight, FedEx Freight, R&L, Conway, etc. Please send any questions to this account.
|
|
Up for sale is a GREEN REVOLUTION GR SYSTEM MOUNT SPINNER BIKES 20 ALTERNATORS WITH GRID TIE OUTBACK 3600 VA PURE SINE WAVE INVERTER. THIS SYSEM WAS USED AT A LOCAL SCHOOL WORKOUT GYM. ALTERATORS MOUNT ON SPINNER BIKES AND OTHERS CAN BE RETROFIT. PAID OVER 30.000.00 FOR SYSTEM. EACH BIKE HAS A HANDLE MONTED CONTROL WHICH CONTROLS LOAD ON TURNING WHEEL. CONTROLLER INCREASES VOLTAGE ON ROTOR OF ALTERNATOR INCREASING OUTPUT. THERE IS A COMPUTER ON THIS SYSTEM THAT CONNECTS TO A HDMI MONITOR OUTPUT SO YOU CAN SEE WHAT TOTAL OUTPUT IS FROM ALL THE BIKES. NOTE YOUTUBE VIDEO LINK) WHEN PEOPLE RAN THE SPINNER BIKES THE ALTERNATORS ON 20 BIKES. WOULD POWER A 3600 VA OUTBACK PURE SINE WAVE GRID TIE INVERTER(USED ON SOLAR PV SYSTEMS) THIS INVERTER WOULD POWER THE GRID FROM THE ALTERNATORS TURNING ON ... moreTHE STATIONARY BIKES. NOTE A FEW LINKS OF THE SYSTEM IN USE. FREIGHT SHIP OR LOCAL PICKUP. THE 2 BATTERIES INSTALLED WERE BAD 12 VOLT 110 AH EACH. INVERTER IS 24 VOLTS IN 120 VOLTS 3600 VA OUT. HAVE MORE PICS IF NEEDED. CONTACT WITH ANY QUESTIONS INFO LINK: IMPORTANT! Please read before submitting bids: Our Return Policy: By bidding on this item you'll completely understand the terms and conditions of this auction and Agree to indemnify and hold CCTV1 and associates harmless from all claims or demands associated with sale or condition of this item All items are sold as is no returns. We do our best to present accurate and detailed information about every item we sell. We desire to provide strong customer satisfaction and a very positive experience for all of our customers. However. It is the responsibility of the bidder to carefully review all item photos and description and ask appropriate questions. We pride ourselves in providing good service and great low prices to our customers over the years. Our experience and good standing speak for itself. We have assisted eBay Trust and Safety Team in fighting credit card fraud and have reported numerous illegal transactions and helped close deceitful and fraudulent accounts to kee
|
|
Charging station in like new condition. Purchased new from Amazon, used for 8 months. It will come with cable that connects unit to the breaker box. New units come without it.Buy it now option will include free shipping. The choice of thousands of drivers and the preferred charging partner of the Nissan LEAF. Ford, BMW Active-E and Mitsubishi i-MiEV. 15-foot cable lets you refuel multiple cars and install close to your power source. Minimizing installation costs. Rated safe for indoor/outdoor use and compatible with all major EV models AeroVironment's Level 2 EVSE is safe. Reliable and easy to use. A green light tells you it's ready, and it automatically stops when it's done charging. Plug and unplug safely without pressing any buttons. It's that simple. AeroVironment has done ... morea great job of making this a great user experience. I'm telling everyone about AeroVironment and how they're ushering in this new era in automotive history. Saro D. Nissan LEAF driver In comparison to[another manufacturer's unit] This had a nicer look and a much more compact design. I would definitely recommend AeroVironment to any electric car user. It's a great unit.we're just crazy about it. Victor B. Chevy Volt driver SAFETY- Regulatory: UL. CUL listed- Auto short circuit and ground fault shutoff- Protection against live power and power surges- Cable breakaway system DEPENDABILITY- Based on 20+ years of charging expertise- Compliant with SAE J1772 charging standard- ADA compliant installation available- 24-hour support SPECIFICATIONS- 208VAC to 240VAC- Requires dedicated 220/240 Volt 40A circuit- 30A output maximum current- 60/50Hz- 10 pounds excluding cable- 15' cable length
|
|
Dual Axis Sensor For sale is a used. Schaevitz brand Dual Axis Sensor, 3935 type. It does have some scratches around it. Please feel free to use the zoom tool on the photos above to get a closer look! The owner of Fredrich Electronics. My father, was recently injured very badly in an accident. The accident has left my mother in need of someone to manage family business affairs. I am selling a wide variety of electronic equipment from his workbench, along with antique Aladdin lamps, glassware, and many other unique and rare items he has collected over the years. I can only assume that the equipment on his workbench has full functionality. Please bid accordingly. Thanks and HAPPY BIDDING! ALL ITEMS WILL BE SHIPPED BETWEEN MONDAY AND WEDNESDAY ONLY! PLEASE PAY WITHIN THIS PERIOD TO ENSURE PROMPT ... moreDELIVERY!
|
|
If you want a generator with the control. We will separate from this system. You can use this as a stand alone unit. Just attach a 12 volt battery to cable. As you change the power setting on the bike mounted control you are changing the voltage to the rotor in the alternator thus increasing output and more load on the bike. Up for sale is a GREEN REVOLUTION GR SYSTEM MOUNT SPINNER BIKES 15 ALTERNATORS WITH GRID TIE OUTBACK 3600 VA PURE SINE WAVE INVERTER. THIS SYSEM WAS USED AT A LOCAL SCHOOL WORKOUT GYM. ALTERATORS MOUNT ON SPINNER BIKES AND OTHERS CAN BE RETROFIT. PAID OVER 30.000.00 FOR SYSTEM. EACH BIKE HAS A HANDLE MONTED CONTROL WHICH CONTROLS LOAD ON TURNING WHEEL. CONTROLLER INCREASES VOLTAGE ON ROTOR OF ALTERNATOR INCREASING OUTPUT. THERE IS A COMPUTER ON THIS SYSTEM THAT CONNECTS ... moreTO A HDMI MONITOR OUTPUT SO YOU CAN SEE WHAT TOTAL OUTPUT IS FROM ALL THE BIKES. NOTE YOUTUBE VIDEO LINK) WHEN PEOPLE RAN THE SPINNER BIKES THE ALTERNATORS ON 20 BIKES. WOULD POWER A 3600 VA OUTBACK PURE SINE WAVE GRID TIE INVERTER(USED ON SOLAR PV SYSTEMS) THIS INVERTER WOULD POWER THE GRID FROM THE ALTERNATORS TURNING ON THE STATIONARY BIKES. NOTE A FEW LINKS OF THE SYSTEM IN USE. FREIGHT SHIP OR LOCAL PICKUP. THE 2 BATTERIES INSTALLED WERE BAD 12 VOLT 110 AH EACH. INVERTER IS 24 VOLTS IN 120 VOLTS 3600 VA OUT. HAVE MORE PICS IF NEEDED. CONTACT WITH ANY QUESTIONS INFO LINK: IMPORTANT! Please read before submitting bids: Our Return Policy: By bidding on this item you'll completely understand the terms and conditions of this auction and Agree to indemnify and hold CCTV1 and associates harmless from all claims or demands associated with sale or condition of this item All items are sold as is no returns. We do our best to present accurate and detailed information about every item we sell. We desire to provide strong customer satisfaction and a very positive experience for all of our customers. However. It is the responsibility of the bidder to carefully review all item photos and description and ask appropriate questions. We
|
|
You can use this as a stand alone unit. Just attach a 12 volt battery to cable. As you change the power setting on the bike mounted control you are changing the voltage to the rotor in the alternator thus increasing output and more load on the bike. CAN USE IT TO CHARGE A 12 VOLT BATTERY AND POWER A GRID TIE STAND ALONE INVERTER. Up for sale is a GREEN REVOLUTION GR SYSTEM MOUNT SPINNER BIKE ALTERNATOR AND BIKE MOUNTED LOAD CONTROL. WILL INCLUDE A CABLE THAT GOES FROM ALTERNATOR TO YOUR BATTERY. THIS SYSEM WAS USED AT A LOCAL SCHOOL WORKOUT GYM. ALTERATOR MOUNTS ON A SPINNER BIKE AND OTHER BIKES CAN RETROFIT. EACH BIKE HAS A HANDLE MONTED CONTROL WHICH CONTROLS LOAD ON TURNING WHEEL. CONTROLLER INCREASES VOLTAGE ON ROTOR OF ALTERNATOR INCREASING OUTPUT. NOTE A FEW LINKS OF THE SYSTEM IN USE. ... moreHAS BEEN TESTED IN GOOD OPERATING CONDITION. CONTACT WITH ANY QUESTIONS INFO LINK: IMPORTANT! Please read before submitting bids: Our Return Policy: By bidding on this item you'll completely understand the terms and conditions of this auction and Agree to indemnify and hold CCTV1 and associates harmless from all claims or demands associated with sale or condition of this item All items are sold as is no returns. We do our best to present accurate and detailed information about every item we sell. We desire to provide strong customer satisfaction and a very positive experience for all of our customers. However. It is the responsibility of the bidder to carefully review all item photos and description and ask appropriate questions. We pride ourselves in providing good service and great low prices to our customers over the years. Our experience and good standing speak for itself. We have assisted eBay Trust and Safety Team in fighting credit card fraud and have reported numerous illegal transactions and helped close deceitful and fraudulent accounts to keep eBay clean. You will feel safe with us! Your bid is your acknowledgement that you have read and accepted the following terms of sale All closed auctions are non-cancellab
|
|
|
CNG Quickfill 20 Bottle Cascade Compressed Natural Gas Quick Fill You are buying a 20 Bottle CNG Quick Fill Cascade comes with the cascade wire bin as pictured. unit is used. Removed from a privately owned company working cng fill station. Used. Sold As Is. The buyer may pick up at our location. I have two cascades with 20 bottles per cascade available for sale you are buying ONE 20 bottle cascade for $2100 or you can buy both cascades for $4200($2100 per cascade) ~Shipping~ Any buyer who wants to have the unit shipped will need to make arrangements with their choice of shipping carrier/company. We can load the unit with our forklift. The item would ship from our commercial address. This item is available for sale locally and we reserve the right to end this ad early.
|
|
|
Onan 35 KVA generator with transfer switch. Generator can run on natural gas or regular gas. Natural gas is half price from diesel! You will save ton of money using natural gas. Also it's always connected so you can never run out of fuel. Was our backup generator for IT room. Regular service was always done. Also new muffler was installed last year. Generator was rebuilt with new brushes.etc including full load test. This was about $7000. All done last year. Receipts available. We have no need for it since our IT was moved to another location.
|
|
|
Fuelmaker 3600 psi 1 gge per hour fill station. I bought a new oem compressor head and oem hose and nozzle and used it briefly before lost location I was filling at. Save thousands over new knowing main wear parts are new. The cabinet shows wear from moving and use. But is fully functional and work perfect.
|
|
|
A used brass water meter dial only with enamel face and 7 separate dials measuring cubic feet of water used.
|
|
|
FM-4 CNG fueling appliance removed from local utility due to larger compressor install. I have 4 in working order I do not know how much time is on them but I do have new timer chips that can be purchased extra. This auction is for 1 unit. Pick up in Nor Cal or ship at buyer cost.
|
|
Remanufactured Dual Hose Fill Post CNG Fueling 12 month warranty Description: Dual hose fill post with integral vent hose breakaway. Fill post body has 6000 psi manual shut off valve. Fill post with NFPA required placards. Tubing is.035 ¼“stainless. Hoses are Parker Paraflex AGA 1-93 electrically conductive hose required for CNG fueling applications. Fill posts body is mounted on 2” post that can be inserted into base sleeve or poured into concrete. Each post has all new Parker flex hose. All valves and nozzles are tested and replaced with new parts as needed. Posts are provided with new powder coating finish. Posts come with a 12 month warranty. Manual shut off Valve 2’ Post Hose retractor 15’ x ¼” Parker Paraflex CNG hose assembly Three-Way ¼” Ball Valve In-line break away ... moreNGV-1 Type2 refueling nozzle Go Freedom Fuel Inc. Specializing in CNG Transportation Solutions for Main Street America" 4333 W 530 Rd. Pryor Creek. Oklahoma Ph. 918 581 4311 Cell 720 227 7944 Fax 720 398 3221 PAYMENTS. SHIPPING. DISCLAIMER. CONTACT US We accept PayPal and direct payment. If you qualify for PayPal's Paypal Credit. You may make installment payments to them for your purchase. Please see shipping method under the Shipping and payments tab above. No refunds on Used or Opened CNG(Compressed Natural Gas) Conversion Kits. CNG Parts or CNG Cylinders Refunds are only made with Return Autorization and have a 10% restocking fee. Shipping is non-refundable on all our products sold. Our CNG Conversion Kits are not EPA or DOT certified. Some of our CNG Cylinders are not DOT Certified. But are ISO Certified. All CNG Conversion Kits. CNG Parts or CNG Cylinders installed or not installed are considered Do-It-Yourself and are installed at your own risk. Installation of CNG Conversion Kits. CNG Parts or CNG Cylinders is buyers responsibility to obtain, perform and maintain. By purchasing any of our products. You agee to forever hold harmless, indemnify and convent not to sue Utah CNG LLC or anyone affilia
|
|
|
8 year old Aqua therm wood boiler with waste oil conversion. Run on wood or waste oil.Comes with many extra part new in box. Well mintained and runs great Boiler is up and running to be viewed many years of free heat. Contact Tim at 845-532-8150
|
|
|
Normal 0 false false false EN-US JA X-NONE AeroVironment Home EV Charger One owner. Well cared for, ready to use, like new. Free ground shipping within the continental United States. AeroVironment 30 amp home EV charger. As is. Excellent condition. Includes 25ft. cable. Mounted cable caddy, and junction box. Specifications: Industry standard SAE-J1772 connector-208 VAC to 240 VAC-requires dedicated 220/240 V 40A-circuit-30A output maximum- UL. CUL listed
|
|
|
Fuel saving device Use with all types of diesel engines.Thailand Products I accept ONLY PayPal for payment. The payment is expected within 5 days after the auction ends. Free Shipping Handling WORLDWIDE. The package will be shipped directly from Thailand via Standard Small package Airmail and it will take about 11-20 business days. I do not ship to UK. 100% Satisfaction Guarantee:If you are not satisfied with the product you purchased for any reason.Please contact us for a return instruction within 7 days for a refund. Shipping Handling Costs are not. Please contact us by ebay message only.
|
|
Silicon Energy Wireless Fusion Receiver in Glass Plate w/ Brace Arms Condition: Good cosmetic condition. With some minor scuffing and scratching in spots. Smudging along most of glass plate. Unit has not been tested, and there are no included accessories. Measurements: 14.5" x 14.5" Notes: Please see photos for additional detail and feel free to ask questions. Store: G Our customer's satisfaction is our top priority. In the event you experience any problems with your order. Please contact us prior to leaving a negative or neutral feedback and we'll be sure to offer a speedy resolution to any issues that may arise. PAYMENTS Paypal is the only method of Payment we accept. No exceptions can be made. Payment must be received within 3 days of the auction's end. This also applies ... moreto combined orders. Items left unpaid for more than 3 days are eligible to be relisted and have an unpaid item claim filed. SHIPPING We offer combined shipping as long as we have packaging material to accommodate the size/ weight of the items to ensure a safe shipment. Auctions must end within 3 days of each other to be eligible for combined shipping. Combined shipping is automated for items with a calculated rate. So when you are done bidding you can proceed to checkout. Any item sold by the Seattle Goodwill is eligible for local pick up at our warehouse 7 days a week between the hours of 9 a.m. to 3:30 p.m. Monday through Saturday, and 10 a.m. to 3:30 p.m. on Sundays. Please note that payment must be cleared online prior to pick up, as we are unable to accept cash or process payment at our location. Local pick up items not claimed within 14 days will be relisted without notice and considered a donation. INTERNATIONAL BIDDERS We do not ship to the following locations: Africa. South America, Central America, Mexico, and Asia(except Japan) We ship internationally to Europe. United Kingdom, Japan, Australia, New Zealand, and Canada. Customers from New Zealand will need to email prior to bidding to be added to the list of ap
|
|
|
Outside wood burning boiler great for home or out buildings. The insde Height of the wood chamber is 2' 5" the width is 31" it's 3 ft deep if you have any questions feel free to call me at(812) 344-2754 a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14988d902f2-0x10e-
|
|
|
Onan/Zenith Tri-fuel carburetor for use with gasoline or LP or natural gas. Carburetor is complete with electric choke. Choke lock-out pin for use with gaseous fuel, and air cleaner hose adapter elbow. Mounting flange bolt holes- 2 11/16" C to C Throttle bore- 1 3/8" Venturi- `1 27/32"
|
|
|
F4energy is an Irish based CHP company that specialises in bespoke CHP container systems. Available Dec 2014. One fully overhauled MAN 2876 Gas Engine 185kWe fitted with Motortech All in One contril System. MIC4 Motortech Ignition System, Varifuel and Integrated Throttle. Full top and bottom end overhaul. Zero houred engine. Also available is a MAN 2842 twin turbo 370kWe CHP container. Both engines can be bespoke designed for nat gas. Biogas, landfill or sewage gas. F4 energy CSM Ltd.
|
|
|
TCM 100HP Duplex Compressor Complete Skid with many spare parts. Serial Number Q002680-81 Skid Dimensions 7' 6" wide. 19' 6" long. Estimated Weight 12,000- 15,000 LBS Originally Deployed in 1999 at the Imperial County CNG Fueling Station in El Centro. CA This is a complete skid with many additional parts. Original Plans available. At one time. This handled the CNG fleet for the county until it was discontinued and transported to the City of Industry in 2013. Sold as is and with no warranty. Buyer responsible for removing it within 2 weeks of purchase. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-149b16ffc0b-0x10a-
|
|
Used in great working condition. Model EVSE RS 17314-015 15ft Cord AeroVironment Level 2 EVSE is safe. Reliable and easy to use. A green light tells you it's ready, and it automatically stops when it's done charging. Plug and unplug safely without pressing any buttons. It's that simple. SAFETY- Regulatory: UL, cUL listed- Auto short circuit and ground fault shutoff- Protection against live power and power surges- Cable breakaway system DEPENDABILITY- Based on 20+ years of charging expertise- Compliant with SAE J1772 charging standard- ADA compliant installation available- 24-hour support SPECIFICATIONS- 208VAC to 240VAC- Requires dedicated 220/240 Volt 40A circuit- 30A output maximum current- 60Hz- 10 pounds excluding cable- 15' cable length For Nissan Leaf, Volt, i3, Spark, ... more500e, Focus Electric, C-Max, Fusion Energi, Fit EV, Accord Plug-in, Soul EV, i, ED, Tesla, e-Golf, RAV4 EV, Prius Plug-In.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-149d8bb8d1e-0x110-
|
|
This pre-owned item is in'Excellent' condition US Filtermaxx 2400G Centrifuge Features are: 120 volt entry model. Submicron Particulate Removal Feed rate 10 to 40 GPH Designed. Made and tested in USA. Forced Ventilation exhausts vapors released during processing waste oils or biodiesel. Prevents contamination of clean oil by water vapor and ventilates methanol vapors. Clean oil and dirty oil are separated by an internal dam Feed plate distributes oil evenly around circumference does not channel oil into a few small spots or use a wobbly cone. Single phase ¾ hp industrial electric motor. Footprint fits on top of 55 gallon drum. Belt overdrive system drives the high-speed rotor while the motor runs at 1800 rpm for a quieter. Cooler running, longer lasting centrifuge. Large 1 gallon ... moredisplacement bowl that filters 360 gallons of oil per day. 165 cubic inches sludge capacity. Input ¼ inch NPT. Output 1¼ inch NPT. Operating load is taken by 1-inch diameter spindle with replaceable bearings. Not the motor bearings as with some other centrifuges. Bowl is removed by the quick release spindle in less than a minute. Heavy duty 1 inch thick aluminum centrifuge body for rigidity and minimal vibration. Rotor is machined aircraft grade aluminum casting. Machine weight 106 pounds. 15 minutes from box to operation. Automatic controller(optional) allows unit to cycle and drain sludge for unattended cleaning of up to 960 gallons of biodiesel per day! G&J HOME DÉCOR carries a large stock of Books. Movies. Mugs. Shot Glasses, Spoons. Magazines and Other Stuff Payment& Shipping Payment for all items is required within 5 days of purchase! Combined Shipping We can offer reduced shipping charges when multiple items are purchase and shipped in the same package. If interested. Please ask and include zip code or country(if not USA. Also specify items to be purchased. U.S.A. Shipments This item will be shipped via UPS. Use the shipping calculator to determine the exact cost. Worldwide Shipments We ship to
|
|
|
Like new VSP Powerpack Electric Generator. Awesome piece of new technology for all your mobil power needs. Only been used once on a movie shoot for maybe 10 hrs. Excellent condition. Can be charged by car. Solar, or 110v plug at home. Gives 3500 watts of instant power and has silent operation. Perfect for movie sets or any mobile power needs. Also used for power tools and appliances as well. Very reliable and best of all. eco friendly. Listed below wholesale price! Payments must be recieved within three days of the end of bidding or item will be relisted.
|
|
|
Complete pellet line. Price includes infeed live bottom mixer. Feed auger, pellet mill with 1/4' die, conveyor, bucket elevator to cooler, counterflow cooler, screener, bucket elevator to bagging system, hopper and scale with weight sensing shut off, bagger, bag heat sealer with conveyor, and pallet wrapper. Pellet mill is a CPM 7122 with a 300 hp motor. CME CF3 counterflow cooler with three ton per hour capacity and screener only one year old. Last used for making wood pellets. Can be seen running. $250.000 total price. We can assist in unhooking and loading smaller items. A rigger is necessary for the mill. Line is available locally and we reserve the right to end the auction early
|
|
|
Green Plug 15- 120VAC/ 15 Amp- Electricity Saver- Commercial Refrigeration Actual pictures of item. Works. Please view pictures for condition/ inclusions and judge. Please ask all questions before bidding. All sales final. Thank You. Shipping is $10 to the 48 contiguous states only. Insurance upon request only.
|
|
Great Deal on"End of Year Clearance" for CNG Equipment* Slightly U sed- ~1.100 Hours* Norwalk Model NQ-SV3L-15 CNG Comp ressor complete with Relay Logic Controller in an explosion proof enclosure This Norwalk u n it is in great shape. We installed this as a new unit for a client a few years back. This has been serviced by us since new. Client has recently upgraded to a larger system and has asked us to liquidate this unit on their behalf. Unit is priced to sell quickly. Only has 1.100 hours of use on this unit and comes bundled with a relay logic controller. This unit is ready to go. Shipping or Pick up is available from our Central New Jersey Location. We also have Gas Dryers that we can bundle with this item of if you need them. Any Questions. Please Call the Norwalk CNG Compressor ... moreHotline at 908-205-2430
|
|
|
Lear Siegler starter generator for Solar Saturn turbine. 24vdc. 4000 to 8000 rpm. Model 632-10. Good working condition. 4 available. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14a4849cd7e-0x107-
|
|
|
1990 and 1996 Vulcan chemicals Wichita directories good condition old books
|
|
|
USED Ariel CNG Compressor package with Caterpillar natural gas drive engine. Fully enclosed. Buffer tank. Air compressor, filters, electronics, cooling fan, etc. This unit can compress 100gge/hr with adequate inlet pressure. Very good condition. Manuals are included. INCLUDED in this sale(but not physically enclosed in box) is 100 GGE of storage tanks. NEW dispenser and dryer available for additional costs. Please contact seller for more information. Located in Pennsylvania. Local pick up or you arrange delivery separately. Item is also listed for sale locally. We do not sell or ship to California.
|
|
INSTRUCTIONS with DRAWINGS to CONVERT GAS TO ELECTRIC 1981 printing Build a battery compartment in any Chevette Dear readers! please consider the worthy charity a part of this sale supports. no-kill pet shelters are great for the cats and their new owners, who benefit greatly from their newfound feline companions. cat and owner both may live longer. Happier lives. Thank You nice vintage plans from Flight Systems of Pennsylvania 40 pages with many full page pictures and 6 technical drawings at the back, plus 19 technical drawings that come with the book. great for personal or school project; teach electricity. Blueprint reading, machining, project planning and industrial design. thank you for looking. And ENJOY! $4.00 SHIPPING TO ANYWHERE IN THE USA Please enjoy the pictures. Computer users ... morecan use the zoom feature! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i strive to have happy customers. Because i like to BE a happy customer. i like to share interesting and fun items. with 100% feedback(thanks. All customers! and a commitment to your satisfaction, i hope to earn your trust that we'll have an honest deal. thank you for spending your valuable time here! please see other listings from anunderdogg. Where there's no need to fear!
|
|
|
This auction is for one(1) Valence U Charge XP Battery. Model# UEV 18XP its 19.2 Volt and 69 AH. perfect working condition. less than 20 charge cycles. 3 day auction
|
|
P-279 Richland. WA Hanford Simulated Fast Breeder Fuel Pellet, Westinghouse Co. 3 X 4 1/2 inch mounting board U.S. Department of Energy, Westinghouse Hanford Company. nbsp; From a Pasco, Washington estate purchased in the 1980's. Will be sent in padded envelope with protective poster board on both sides. Colors may not be accurate because of lighting, camera settings and computers along the way. Look the pictures over carefully, as our items are being sold as is, but guaranteed as described. Photos and postcards are shipped with protective cardboard in padded envelopes. Will ship only to U.S. addresses. First Class S&H& Delivery confirmation is $2.50. Local pickup is not available. Payment is expected within 48 hours and items not paid for in 10 days will be re-listed and negative ... morefeedback may be posted. Pay with PayPal
|
|
|
Up for auction: JGA ARIEL W/ 3306TA CAT EQUIPMENT P& ID DRAWING 1-7ASBLT Original EDO ANGI equipment drawing chart. Paypal authorized seller
|
|
|
This is a small home made waste motor oil filtration system. Runs off any air compressor. Simply pour oil in the top. Use air to push oil out into fuel tank, storage tank, etc. Has water and heavy particulate drain on the bottom of the tank. Utilizes 30, 10, and 2 micron nominally rated filters. I used a similar system I built to run WMO through many different pieces of heavy equipment and an off road pickup truck with out incident. I cannot guarantee your success. Item is sold as is. Do with it what you wish. Seller is not liable for any damage that may occur to buyers personal property. Replacement filters are readily available but if help is needed obtaining them, i can do that.
|
|
Normal 0 Ocean Wave Track Electrical Power Generator Alternative Energy Design Idea start date of this sale is1/15/2015 Patent not yet applied for. This listing hereby establishes creative origin and date. The Shoreline Wave Track Power Generator Imagine a sturdy zig-zag shaped sea wall designed to be both strong and to create higher. Concentrated waves. Near the narrow end inside each V shaped channel. Mounted to the wall or the sea floor, a generator and its braces driven by a flattened paddle wheel track. The drive assembly platform would be mounted so as to self adjust to tidal levels(for example with jack-screws) The(mostly) horizontal force of the waves against the blades of the track drive generator rotors along the track. The area of each blade and span between paddle blades determined ... moreby wave timing- frequency/distance between each wave. The best surfing and biggest waves are in funnel shaped bays. This design could take advantage of such man made or natural features. The simplified drawing above shows the basic concept. But is lacking detail, which are easily filled in according to established engineering code and materials science. I am too old and content to pursue any serious promotion of this. So I figured why not just stick it out there, someone might find it interesting. Payment to be upon legal witnessed contractual transfer of interest in this invention idea package. US citizens/corporations only please. No foreign sales* Thank you for your consideration.
|
|
Normal 0 Ocean Wave Cradle Electrical Power Generator/Sea Wall Alternative Energy Design Idea start date of this sale is1/14/2015 Patent not yet applied for. This listing hereby establishes creative origin and date. The Shoreline Cradle Imagine a sturdy zig-zag shaped sea wall designed to be both strong and to create higher. Concentrated waves. Near the narrow end inside each V shaped channel. Mounted to the wall and the sea floor, a generator and its braces driven by a rocking floating lever. The drive rotor-cams and gears would be mounted so as to self adjust to tidal levels. eg: generator driven by chains using spring loaded tensioners) The(mostly) vertical oscillation of the float-affixed actuating lever drives the linkage and rotors. Which then rotate ratcheting gears attached to the ... moregenerator. The lever length(or span between fixed floatation devices at either end) determined by wave timing- frequency/distance between each wave. The best surfing and biggest waves are in funnel shaped bays. This design takes advantage of this phenomenon. The W profile lever top view is wedge shaped to fit the V channels. The simplified drawing above shows the basic concept. But is lacking detail including the mounts. gear sizes/ratios and tensioners. But to give an idea of scale. Each V shaped channel would be at least 100 yards from mouth to apex. Each V shaped flotation lever, at least 40 feet long(I am too old and content to pursue any serious promotion of this. So I figured why not just stick it out there. Payment to be upon legal witnessed contractual transfer of interest in this invention idea package. US citizens/corporations only please. No foreign sales* Thank you for your consideration.
|
|
|
Up for auction is a Up for auction is what i believe to be a solid brass Coppus Turbine Division Medal. I am not sure the exact reason this medal was produced or who it was intended for but its a very neat medal. The back is covered in glue. Measures 1 1/2" diameter This item came from a large lot of Medals. Badges, Tokens and random other items i purchased at an estate sale. Most of the items have remnants of glue on the back where they must have been glued on to some sort of cloth covered board for display. I am going to be listing a large variety of items that came from this lot so keep watching my auctions. If you win more than one item i will combine shipping. I combine shipping. Shipping and handling is estimated through ebay. Posted with
|
|
FUELMAKER MODEL FM4 CNG VEHICLE REFUELING STATION. SERIAL NO. 13319. PURCHASED THIS FROM A LOCAL COLLEGE. THEY REMOVED IT BECAUSE THEY NO LONGER NEEDED IT. I TALKED TO THE DIRECTOR OF MAINTENANCE AND HE SAID IT WORKED JUST FINE BEFORE REMOVAL. VERY LITTLE USE ON IT AS THEY ONLY HAD ONE VEHICLE THAT TOOK CNG. IT WAS HARD WIRED INTO A BOX SO IT HAS NO PLUG. I WIRED IT UP AND IT POWERED UP JUST FINE. IT TAKES 208/230 VOLT 1 PHASE POWER. COMES WITH THE FILL HOSE IN PICTURE. I CAN PALLETIZE AND SHIP THIS ITEM TO YOUR DOOR BY WAY OF FREIGHT TRUCK. EMAIL ME YOUR ZIP CODE AND IF IT IS A BUSINESS ADDRESS OR RESIDENTIAL. IF YOU NEED A LIFTGATE TO GET IT OFF OF THE TRUCK OR YOU HAVE A FORKLIFT AND I CAN GET YOU A QUOTE FOR SHIPPING. LOCAL PICK IS FINE ALSO. THANKS AND EMAIL WITH QUESTIONS. Powered by ... moreThe free listing tool. List your items fast and easy and manage your active items. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b09010691-0x106-
|
|
|