|
|
Order by: |
Buy It Now
Free Shipping
Condition: New – Open box Location: Rexburg, United States
This item was inventoried and sat on the inventory shelves never to get used. We have multiple available.
0 bids Free Shipping
Condition: New Location: , China
Model Number: for Disel Engine Parts. Product Detail.
0 bids Free Shipping
Condition: New Location: , China
Model Number: for Disel Engine Parts. Product Detail.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New – Open box Location: Albany, United States
ID: AHV20250 --- 2.5 million Btu/h (730 k W) @ $6,000.00Straight burner w/steel housing; Propane; Al manifold w/ 330 SS wings; Right hand piping; NPT connection; Pilot; Flame rod; Standard filter
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
APPLICATION:Removal / Installation Wrench Tool 2" MPT Full Internal Relief Valve. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm.
Buy It Now
$11.25 Shipping
Condition: New – Open box Location: San Marcos, United States
OSASIS # BV704-4S6SDBN CNG 1/2" Isolation Ball Valve. Ports: 3/4"-16. WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and reproductive harm.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
Make your own biomass fuel pellets (not wood) or animal feed pellets. It can also make fuel pellets from soft biomass materials like leaves, grass, pine needles, or juniper. A die puller and an allen wrench are included.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
I bet we answer the phone.
0 bids Free Shipping
Condition: New Location: South El Monte, United States
Fuel shut off solenoid fuel pump 3928160 Cummins 6CTA 8.3L. Cummins 3928160. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model. Close Notes. Hold current.
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
POL CONNECTION. DIP TUBE: 10.2" LENGTH. WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. MANUAL BLEEDER VALVE.
Buy It Now
Free Shipping
Condition: Used Location: Arlington, United States
Most of the tanks were manufactured in 2013-2016 and have life expectancy of 20 years. Those tank systems were taken off Class 8 trucks and were originally manufactured by Hexagon/Lincoln, Agility, and Quantum Fuel Systems.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
Buy It Now
Free Shipping
Condition: New Location: Santa Cruz, United States
All readable and log-able via RS-485 and user friendly EKM Dash software. This model requires 1 to 3 CTs, depending on you electrical system. Spec sheet/instruction manual included. 3"w x 4"h x 2.5"d.
0 bids Free Shipping
Condition: New Location: , China
Model Number: for Disel Engine Parts. Product Detail.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New Location: Pompano Beach, United States
332/J5060 - Fuel Shut Off Solenoid for JCB VOLVO 120C L120C L150C L180C VOE11033561 11033561. To be on a safe side, we prefer for you to. There is no hiden fees! BENEFITS GlobalPartsZone is a one stop solution for your parts needs.
0 bids $7.35 Shipping
Condition: New Location: Clovis, United States
0 bids Free Shipping
Condition: New – Open box Location: Hesperia, United States
GE Gas Turbine. Full Set of 10 combustion liners for Positions 1-10. details of each combustion liner can. GE Combustion Liner - Picture 3 Once the box was opened, any etchings or inked detail from interior or exterior of combustion liner.
Buy It Now
Free Shipping
Condition: New Location: Chippewa Falls, United States
I bet we answer the phone. It can also make fuel pellets from soft biomass materials like leaves, grass, pine needles, or juniper.
0 bids Free Shipping
Condition: New Location: , China
JSRGO@ quality are among the highest in the industry. It features Strength, Flexibility. 127 X 610mm. - CE / UL Certified Heater with One Year Warranty! Etched Foil heaters. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New – Open box Location: Dallas, United States
GFI COMPUVALVE V9-100 WORKING PRESSURE 100PSIG 12VDC
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
CROSSES TO A7797A. They are designed to be used at the end of a filling hose on a bobtail, dispensing system or nurse tank. trucks, cars, generators, tractors, boats, motorcycles, RVs etc. We can build a kit to convert almost any engine!
0 bids Free Shipping
Condition: New – Open box Location: New Bedford, United States
Spinner ll oli centrufuge. MODEL 3400.
0 bids Free Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: , China
Engine Oil heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! - CE / UL Certified Heater with One Year Warranty!
Buy It Now
Free Shipping
Condition: New Location: Auburn, United States
0 bids $12.15 Shipping
Condition: New – Open box Location: San Antonio, United States
NGV,CNG Natural Gas Vehicle Fueling Hose Breakaway. I have them listed as open box due to the shelf / storage ware "holes in bags". I opened one for the Pictures.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
0 bids Free Shipping
Condition: New Location: , China
12V 35 Watt. Products include: silicone heater pad (1/pcs ). / GIS insulation cover / Nitrogen Bottle heater/ Food Kitchen Pizza Heating Pads. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: , China
Model Number: for Disel Engine Parts. Product Detail.
Buy It Now
Free Shipping
Condition: Used Location: Arlington, United States
Total Capacity: 100 GGE. Capacity: 29.7 GGE ( 353.5 Liters). Those are carbon fiber, Type 4 / composite tanks. Lincon Hexagon/ Agility. Most of the tanks were manufactured in 2013-2014 and have life expectancy of 20 years.
Buy It Now
Free Shipping
Condition: New Location: Draper, United States
0 bids Free Shipping
Condition: New Location: , China
Installed NTC100K thermistor in center. NO Extra Cost! - CE / UL Certified Heater with One Year Warranty! - Holes / Eyelets can be added on heater upon request, NO Extra Cost! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: , China
102 X 152mm. with built in 90C Thermostat. - CE / UL Certified Heater with One Year Warranty! - Holes / Eyelets can be added on heater upon request, NO Extra Cost! with 3M adhesive backing. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
Buy It Now
Free Shipping
Condition: New Location: , China
Application: Fits For Ouman D59-105-04 Engine. Title: Solenoid Valve.
Buy It Now
Free Shipping
Condition: New Location: Oklahoma City, United States
NEW - Kioshi CNG Storage Tank Type 1 -. Tank inspection sticker current 3 Years or 36,000 Miles. (14x34") - 5.8 GGE rated at 70 degrees F.
Buy It Now
Free Shipping
Condition: New Location: Kansas City, United States
C2
Buy It Now
Free Shipping
Condition: New Location: , China
You can give us your hairstyle number and we can help you find them. We believe good. Model Number: for Disel Engine Parts. communicationwillprevent many troubles. 3）Professional technicians and responsible salespersons;.
Buy It Now
Free Shipping
Condition: New Location: , China
Manufacturer Part Number:Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. 1 x 3928161 R290 SA-4293-24V. Diesel Fuel shut off solenoid valve. Work volt : 24V. Unique Characteristics:Direct in fuel pump.
Buy It Now
$375.00 Shipping
Condition: Seller refurbished Location: Oklahoma City, United States
Charging Rate 2 GGE/HR. Dry Weight 352 lbs.
0 bids Free Shipping
Condition: New Location: , China
JSRGO@ quality are among the highest in the industry. It features Strength, Flexibility. - CE / UL Certified Heater with One Year Warranty! Heating at 10 Degree C. / GIS insulation cover / Nitrogen Bottle heater/ Food Kitchen Pizza Heating Pads.
0 bids $8.45 Shipping
Condition: New – Open box Location: Berthoud, United States
Box tab torn on last valve sold.
0 bids Free Shipping
Condition: New Location: , China
JSRGO@ quality are among the highest in the industry. It features Strength, Flexibility. Wires out from middle of short side (3" side). Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New – Open box Location: Auburn, United States
Tulsa Gas Technologies 16" Whip for CNG Vehicle Fueling Refueling. This is the Flex whip hose that goes between the fill valve and the fill nozzle.
Buy It Now
Free Shipping
Condition: Used Location: Arlington, United States
Total Capacity: 120 GGE. Capacity: 41.1 GGE ( 489.1 Liters). Those are carbon fiber, Type 4 / composite tanks. Most of the tanks were manufactured in 2013-2014 and have life expectancy of 20 years.
0 bids Free Shipping
Condition: New Location: , China
63.5 X143mm. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! with built-in thermostat of 70 degree C. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
Buy It Now
$8.45 Shipping
Condition: New – Open box Location: San Marcos, United States
WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and reproductive harm.
0 bids Free Shipping
Condition: New Location: , China
Silicone heater pad (1/pcs ). / GIS insulation cover / Nitrogen Bottle heater/ Food Kitchen Pizza Heating Pads. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids Free Shipping
Condition: New Location: , China
JSRGO@ quality are among the highest in the industry. It features Strength, Flexibility. Installed K type thermocouple in center. - CE / UL Certified Heater with One Year Warranty! Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater.
0 bids $6.03 Shipping
Condition: New – Open box Location: San Antonio, United States
Staubli GMV 08 / C, CNG, Natural Gas Vehicle Refueling Receptacle. I have them listed as open box due to the shelf / storage ware "holes in bags". I opened one for the Pictures.
Buy It Now
Free Shipping
Condition: New Location: Danville, United States
NUMBERS ON VALVE. 9/16-18" SAE THREADS.
0 bids $12.50 Shipping
Condition: New – Open box Location: Chillicothe, United States
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
IMPCO PART NO.:HPR-3600. FUEL TYPE:COMPRESSED NATURAL GAS (CNG). APPLICATION :VEHICLES RUNNING COMPRESSED NATURAL GAS SYSTEMS. NEW DESIGN WITH 5/8" COOLANT CONNECTIONS. Feel free to ask us about conversion kits for almost anything, including trucks, cars, generators, tractors, boats, motorcycles, RVs, etc.
0 bids Free Shipping
Condition: New Location: Ogden, United States
Buy It Now
Free Shipping
Condition: New Location: Nicholasville, United States
FITTING:3/8" MALE O-RING SAE-6 9/16-18 TO 1/4" FEMALE PIPE THREAD. We build conversion kits for almost anything, including trucks, cars, generators, tractors, boats, motorcycles, RVs, etc. We can build a kit to convert almost any engine!
0 bids Free Shipping
Condition: Used Location: Lockport, United States
This item is used. Taken out of service in working condition by NYS. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
0 bids Free Shipping
Condition: New Location: , China
Manufacturer Part Number: Cummins 3928161. Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Diesel Fuel shut off solenoid valve. Unique Characteristics: Direct in fuel pump. Fuel Pump Model: Bosch MW.
Buy It Now
Free Shipping
Condition: New Location: , China
Fuel shut off solenoid fuel pump 3928161 cummins 6CTA 8.3L. Manufacturer Part Number:Cummins 3928161. 1 x shut off solenoid 3928161 24V. Diesel Fuel shut off solenoid valve. Unique Characteristics:Direct in fuel pump.
|
|
|
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 One of the cleanest 5000 PSI units we have ever had. New Valves. Oil, filters and test run for over 4 hours FREE SHIPPING USA 800x600 Manufacturer MAKO Model# 9300 UNIT Year Hours 425 Phase Three HP 7.5 CFM 8 PSI 5000 Filtration MK-1-C Processes 9.800 cf of Air Options Complete Gauge Panel with Hour Meter. Automatic Condensate Drain System with Self Standing Muffler/Reservoir, High Air Pressure Shut-Down Switch, High Air Temperature Shut-Down Switch Dimensions 48” HIGH X 24” DEEP X 24” WIDE Ship Weight 350 Lbs. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 FREE SHIPPING USA lower 48 BUSINESS ADDRESS with a fork lift ... moreor loading dock. Extra fee for liftgate delivery. I will ship to canada and worldwide for additional cost. Pick up in NJ and get a discount ANY QUESTIONS? E-MAIL THROUGH E-BAY OR CALL RUSTY AT 609-364-6179 PAYPAL only 53e.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*16b%3E53e-13ccd03deb8-0xf6-
|
|
Living in a North Woods Maine Cabin All Year Round: A Year in the Maine Woods by Bernd Heinrich Reviews: Heinrich here recounts a recent year he spent in the western Maine wilderness. With his pet raven Jack. He began his sojourn at the end of May. His cabin, without electricity or plumbing, sat in a clearing a half-mile up a steep brush-filled hill accessible only to four-wheel-drive vehicles. His mailbox was at the foot of the trail, and his nearest neighbors lived on the road beyond the mailbox. To keep in touch with family and friends, Heinrich installed a phone and answering machine in the neighbors' outhouse. He takes us through his busy summer and fall of chopping wood and making repairs to the cabin, all the while observing the wildlife around him. He battles with blackflies and ... moremosquitos, mice and cluster flies. no highlighting. Notes, marks, etc. Large softcover. In excellent condition, 260 pgs, 1994. Also included: Large National Geographic Travel Map of Maine& The Maritimes 17 miles to 1 inch scale. 24x36" shows parks, rivers, points of interest, and National forest lands. Excellent condt. plastic-coated paper. u f-h-450 `2g7:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3E%602g7%3A-13dcfb5f727-0xf6-
|
|
|
Used CNG Tank with Internal. Electronic, Shut-Off Valve. tank expires July, 2018) Fits 1998- 2002 Chevy Cavalier. tank capacity 6.2 GGE) Tank is strapped to a pallet, ready for pick-up, or buyer arranges shipping. Used tank/valve sold as-is. Note: Buyer Pays All Shipping Fees.
|
|
water chiller portable mobile gas potable engine 943 Portable engine driven water chiller unit for cooling potable water. Unit is a self-contained cooling system which draws warm water from a storage tank and can either dispense chilled water into individual containers or dispense chilled water into another bulk tank. Could be used in small remote communities. Large gatherings, festivals or anywhere else where chilled drinkable water is needed. Could also be used in concessions to make a water bath for bottled drinks instead of using ice. Chiller uses an automotive type refrigeration compressor which is driven by an 18HP twin cylinder Briggs engine. The water is forced through the system by a belt driven pump. Warm water flows into the water chiller through a hose. In the initial starting ... morephase. Water is by-passed around the thermostatic blending valve(V4) by the START-RUN water control valve(V5) Once the engine is up to speed, the START-RUN valve is turned and water is run through the thermostatic valve. The valve will automatically either recirculate the water to reduce the temperature, or will open and allow more warm water into the system. Cool water will be available within three minutes of starting. Water that is not dispensed will be discharged from the recirculate port. Water comes out of the recirculate port when the dispense port is stopped(with a valve) or when the unit is in start-up mode. The chiller unit does not have an internal fuel tank, it uses a simple fuel line that drops into a regular gas jug. Unit was tested and it works well. For the test we heated a tank of water to about 88 degress. The chiller was turned on and after about three minutes cool water started filling the smaller tank. As seen in the video the cool tank water measured about 66.5 degs. But if the probe was placed in the outlet pipe stream the temp was about 62 deg. We assume the hot asphalt quickly heated the chilled water. See the video for the actual test. Overall this unit is in good usable condition with minor scr
|
|
This is a CNG compressor package complete with two compressors. A built-in gas dryer, sequential controller, and a priority fill panel. The system is capable of producing 55 gas gallon equivalent of CNG per hour from a 20 psi supply. All components are inside an enclosure with no exposure to the weather unlike many of these systems. The package was produced by the industry leading ANGI energy systems and designed with explosion proof electrical elements. This system will work well for a fleet or for a small public station. The system was built and installed in 1994/1995 but saw little use after the price of gasoline fell and was removed from the site and placed in storage a few years ago. The two 20H40NG Ingersoll Rand compressors have very low hours of 305 and 309 hours. These compressors ... moreroutinely operate for over 10.000 hours with proper service and maintenance. These compressors are driven by 40 hp electric motors. The large desiccant dryer tank has external connections for a future regenerative unit if needed. The priority panel will control filling of a three bank storage system to provide a vehicle fast fill capability. The sequential fill controller will control the filling of a vehicle from the storage bank without the need of an expensive dispenser. The system was designed for cold weather operation which has proven to be a problem for some CNG compressor systems. This is an industrial quality system that will operate and last unlike some aluminum compressors. The compressors are completely accessible for removal through the large doors on the end of the unit. There are PDF scans of the drawing package and plenty of space inside the metal enclosure for maintenance. This item is for sale locally and we reserve the right to end this auction early if the item sells. The package will have to be loaded with a crane onto a flatbed truck to be transported. The loading and transportation are the responsibility of the buyer. We also have ASME storage tanks. Dispensers, dryers, and other CNG components as well
|
|
INDEPENDENCE 1000 FUEL CELL SYSTEM- 2 FUEL CELLS IN ONE ENCLOSURE 2- AVISTA LABS( NOW RELI-ON) PERMEABLE ELECTROLYTE MEMBRANE FUEL CELLS- 48 VDC. 2000 WATT SYSTEM RATED POWER OUTPUT 1000 WATT/ FUEL CELL X 2 FUEL CELLS = 2000 WATT FOR UNIT/ SYSTEM NOMINAL OUTPUT VOLTAGE- 48 DC OPERABLE TEMPERATURE 0 C TO 50 C FUEL SOURCE- COMPRESSED HYDROGEN NO MANUAL OR INSTRUCTIONS/ SOLD AS IS/ UNABLE TO TEST APPEARS TO HAVE HAD LITTLE IF ANY USE PERMEABLE ELECTROLYTE MEMBRANE; PRODUCES DC POWER FROM COMPRESSED HYDROGEN AND AIR THIS UNIT CONSISTS OF TWO FUEL CELL ASSEMBLIES 1000 WATT EACH THERE ARE TWELVE PEM MODULES- SIX FOR EACH FUEL CELL WEATHER PROOF STEEL ENCLOSURE PROVIDES SECURE STORAGE FOR 6 HYDROGEN CYLINDERS( THREE CYLINDERS ON EACH SIDE) LOCAL INSPECTION/ PICK UP AVAILABLE. CAN POSSIBLY DELIVER ... moreALSO ENCLOSURE SIZE IS 52" WIDE X 42" DEEP X 72" HIGH SHIPPING DIMENSIONS- APPROX. 60" X 48" X 84" HIGH. WEIGHT 900 LBS SHIPS FEDEX FREIGHT OR YOUR CARRIER FROM ZIP CODE 43434 PAYMENT- MONEY ORDER. CHECK OR PROPAY- PAY ON PICK UP ALSO WILL LOAD IF PICKED UP OR CAN POSSIBLY DELIVER
|
|
For your consideration. We have an amazing package deal that has a nice easy breakeven. This Norwalk Compressor has been completely rebuilt and refurbished by Wise Gas Inc and will be sold with a 12 month warranty through Wise Gas Inc. The compressor is a 20 HP unit that produces at 5-7psi inlet pressure& produces 1 GGE every 7 minutes. PERFECT option for an overnight fill up of 2 Garbage Trucks, or 8 Light Duty Vehicles. It will fill 102 GGE's in a 12 hour period! With an annual rate of 37,230 GGE at $2.00 a gallon, thats an annual savings of over $75,000.00! Your breakeven on this deal is 15 months! This system package will also come with the Fill Posts that are necessary for a complete set-up, a 1 year warranty through WGI, and installation* of the compressor and posts. If you have ... morea fleet of LDV's that are OUL or IA, purchase of this system will be done at a discounted rate. Average cost of a CERTIFIED and professionally installed CNG Conversion system ranges between $8,000- $10,000 dollars. If you would like a quote, you can message me through Ebay. Quote will only be good for those purchasing the complete package. NOT INCLUDED ARE PERMITTING CHARGES FOR ALL LOCATIONS, SHIPPING OF THE UNIT, TRANSPORTATION OF INSTALLATION CREW. Any Questions, please ask PRIOR to purchase. PAYMENT TERMS: 50% within 3 days of auction closing, Final Payment due at installation.
|
|
|
GENUINE BLACKMER PUMP E-100CIP QUESTIONS? CALL US! 248-688-5443 This item was part of a large parts purchase. GOVERNMENT SURPLUS DIVISION DEPARTMENT GARAGE PARTS/STOCK Combined shipping is available-please see our other auctions for other great deals on parts. We have had continued positive feedback on our motors that we have been offering for sale. These surplus items have been excellent quality. Please see our feedback regarding these parts and purchase with confidence. On Jan-08-13 at 10:05:43 PST. Seller added the following information:
|
|
Fuelmaker Authorized Dealer with 7 years experience refurbishing rebuilding the Fuelmaker equipment. Including building HALF FILL and FAST FILL systems using standard Fuelmaker equipment. We aalso refurbish warrant and sell C-3, FM4 units. FuelMaker FMQ2-36 CNG Home Refueling Station Can fill two(2) Vehicles Overnight NOTICE UNIT is sold without hoses. Hoses must be quoted separatly. Hose lengths available are 10 foot. 20 foot and 25 foot. See photo whcih provides company phone number and email address. VAST fuel savings.no road tax.fast payback.easy installation! Available from a Certified FuelMaker Dealer* with over 35 years experience in the natural gas field FuelMaker FMQ2-36 is a compact unit developed in the Americas and now manufactured by BRC FuelMaker. In Italy. FuelMaker products ... moreare fully supported in the USA. My Dealership/ company has been in the natural gas field since 1976. Our Engineers have 14 natural gas related patent. Both design as well as mechanical patents. Service department services all Fuelmaker products. Including the original Fuelmaker C-3 units. We regularly refurbish the entire FuelMaker product line. FuelMaker has been manufacturing home and business natural gas refueling systems for over twenty(20) years. The FuelMaker name is synonymous with quality and reliability. The FuelMaker is the brand most Utilities use to fuel their CNG vehicles. 1) Compact All-in-One CNG Refueling for Home or Small Office, 2) One Year Warranty Direct from Manufacturer. 3) WITH an additional 6 month limited warranty from CNG of Dayton[Dayton Ohio] 4) The world's first high pressure refueling appliance that is certified to safely refuel your CNG vehicle outdoors from your household natural gas line. 5) Filling up is easy. Can fill two(2) vehicles overnight, 6) Connect FuelMaker to your car. Then press the start button and your vehicle will be filled overnight. 7) Please call or text your questions to The Fuelmakersales Hotline at 937-469-3962. 8) This unit can be used with fast fill tanks to
|
|
|
NEW WOODWARD EG-M CONTROLER APPLICABLE TO GE GAS TURBINE GENERATORS AND SOME SOLAR! $35 S/H ANYWHERE IN LOWER 48 US STATES ALL OTHERS EMAIL ME FOR S/H QUOTE! Powered by
|
|
|
GENUINE MARATHON 10/7.5 HP 3 PHASE MOTOR E721 MODEL NUMBER 9VJ215TTDB4026AN X QUESTIONS? CALL US! 248-688-5443 This item was part of a large parts purchase. GOVERNMENT SURPLUS DIVISION DEPARTMENT GARAGE PARTS/STOCK Combined shipping is available-please see our other auctions for other great deals on parts. We have had continued positive feedback on our motors that we have been offering for sale. These surplus items have been excellent quality. Please see our feedback regarding these parts and purchase with confidence. On Jan-08-13 at 10:05:50 PST. Seller added the following information:
|
|
|
Charger in good condition 100% MBG Posted with the.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e108e01ce-0xf7-
|
|
Primary Category: Business& Industrial Fuel& Energy Alternative Fuel& Energy Other LINCOLN CO TUFFSHELL 500 PSI HYDRAULIC ACCUMULATOR TANK Description Description SIMPLY ANOTHER ITEM BY EACH PROJECT. CONSULTANTS FOR EACH INDIVIDUAL EQUIPMENT OR SERVICE YOU MAY NEED WORLDWIDE! You are bidding on a used condition LINCOLN COMPOSITES TUFFSHELL 500 PSI HYDRAULIC ACCUMULATOR Model# R240059-002 HYDRAULIC ACCUMULATOR TANK AS CAN BE SEEN IN THE PICTURES! Model# R240059-002, Manufactured By: TUFFSHELL, ~180 lbs. 38 by 36 by 16 inches approximate raw dimensions and weight. PREVIOUSLY USED TANK. WHAT YOU SEE IS WHAT YOU GET. Note that this placarded has limited life to 2012. Sold strictly as-is no return. Buyer is totaly responsible for the safe and proper use ot these items. Please see pictures. ... moreThey give a great idea of condition. If you have any other questions please ask and expect a prompt reply. Good Luck! PLEASE NOTE BEFORE BIDDING: We included several pictures so you can get a look around. ~ SE HABLA ESPAÑOL ~ ~ FALAMOS PORTUGUÊS ~ ~ NOUS PARLONS FRANÇAIS~ BE SURE TO CHECK OUR EBAY STORE FOR OTHER GREAT DEALS This product can be previewed at our facility in ANN ARBOR- MI. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please ask questions before you bid. Please don’t wait until you have won the auction to begin asking specific questions regarding the item listed. We value our feedback and hope you will do the same. Please do not bid if you aren't going to buy. We will work with anyone on any problems should they arise. They rarely do since we make sure to list as completely as possible. If shipping problems arise we will be there to help. We will always disclose our phone numbers and address to anyone needing them after the auction. From buying experience on eBay. We feel that shipping insurance is a very good idea. Good luck on your bidding and remember communication is the key to a
|
|
|
Bliss e4424 Hammermill built in 1986 and very well maintained at a large corporation. Motor can be added for additional charge. air system can be added for an additional charge. Call for more information. Feel free to email or call me directly with any questions. Comments, or to discuss offers. As for payment, a check would be prefered(they made me say I would take PayPal. But we can talk about that when the deal is done) Be confident, you are working with a 26 year old company in its second generation. We strive to make every sale as easy as possible for our customers. Have a great day. Jon Arkin Arkin Sales 913.908.2431
|
|
|
VAPOR POWER IGNITOR PLUG P/N C106-320-2& 45042283-01. AUBURN 1C-15-3B,$5 S/H ANYWHERE IN LOWER 48 US STATES ONLY ALL OTHERS EMAIL ME FOR S/H QUOTE! Powered by
|
|
|
Used CNG Tank w/Internal Electronic. Shut-Off Valve. tank expires July, 2018) Fits 1998- 2002 Chevy Cavalier. tank capacity 6.2 GGE- 3600 psi. Rubber boot that covers the end is included. Tank is strapped to a pallet, palletized size: 59" long x 31" wide x 24" weighs 280 lbs. Buyer arranges all shipping. Note: Buyer makes the shipping arrangements and pays the shipping fees. Used tank, sold as-is.
|
|
|
Price is per tank. We have quit a few of these. We can make a deal for all or multiple tanks. Carbon Fiber bus tanks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e49ce4cf9-0xfe-
|
|
|
I am selling a diesel fuel fired heater for a diesel truck. It was taken off a Semi-Diesel truck. I believe its supposed to warm the truck inside. Without the truck being started. Saves lots of fuel and just does a good job overall, especially in the winter
|
|
|
Here is a Thiss Technologies high power 3-phase inverter filter. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9(at)zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
|
|
We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- 1 of 2 Catalytic Reactor Oxidizer Parts Unit. FEATURES: 12 digital displays, Main reactor chamber has a thermal blanket around it, Other parts are insulated with aluminum external aluminum cover, lots of stainless plumbing parts, Stainless hopper feeds into main reactor chamber, Electrically liquid heating column, Electrical disconnects, ~2040 lbs. 78 by 43 by 96 overall dimensions raw. Height pretty much dictates it will have to ship by backhaul flatbed or high cube trailer-serious shipping cost because it is both big and heavy. CONDITION: Looks generally good-has been sitting around-very little if any actual use. We do not have any documentation or any knowledge of what this was designed ... morefor. Used on the set of the Terminator Salvation movie production for set decoration. Some minor rash from removing the aging paint after the movie shoot. We think the heat exchanger is temp monitoring for what was external to this unit. What you see is what you get. Sold as-is. As parts/components only, no return. There are two units on seems left hand and one right hand. This listing is for the first buyers choice of JUST ONE of 2. CA# 1812 or 1813 NOTES: packing& shipping is very costly. used& parts- don't commit if. understand item condition. you can make an offer. international is super costly& slow. combined shipping. anything electrical-more restrictions. can't schedule shipping without. delivery takes time. query& purchase response time. we make a mistake now& then. LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automat
|
|
Heat Pipe History A Reno Nevada based company produced these gravity assisted heat pipes for a solar-thermal application. With a solar absorptive fin attached to the evaporator. And the condenser connected to an efficient heat exchanger, the heat pipes transport 300 watts of incident power to the fluid within the heat exchanger. The pipes offered for sale were a part of the performance and reliability test program. They show minor signs of use. Only cosmetic in nature. Heat pipes delivering this level of performance have only been built for specialized applications. And at very high prices. The manufacturer offers these units as evaluation units and learning aids. In anticipation that creative individuals will find them to be useful in an assortment of applications. Instructors and students ... moremay find working with these heat pipes to be a highly productive learning experience. Dimensions Total Length 94 inches. 239 cm Evaporator Length 84 inches. 213 cm Condenser Length 10 inches. 25.4 cm Evaporator Diameter 0.62 inches. 1.59 cm Condenser Diameter 1.12 inches. 2.86 cm Physical Properties Material Aluminum Weight 1.25 pounds. 570 grams Performance Maximum Power 300 watts Temperature Delta@ Maximum Power 10 degrees F. 5.5 degrees C Operating Angle Range 10 to 90 degrees Operating Temperature-40 to 300 degrees F. 149 degrees C Projected Life 30 years Warranted Life 10 years Questions and inquiries gladly accepted.
|
|
|
I acquired this pump in a package deal along with some other items.The pump appears to be rebuilt it has all new bolts and paint it also spins freely. Pump has no manufacture tags/model/make sorry, I will answer any questions to the best of my knowledge and will help in shipping by dropping it off at a freight company. You will be responsible for the cost and paperwork of the freight, this is a probably the cheapest you will ever buy something of this magnitude I'm sure there not cheap. Please cal 734 777 2672 THIS IS A NO RESERVE AUCTION
|
|
Up for Auction. Due to closure of a large In-Plant Printing Facility is the following: HOLZMAG industrial Briquette maker This machine was used to take paper scrap and dust. And compact it into Briquette Logs. It is capable of handling a wide variety of materials including: Paper. Wood Chips, Hay, Straw, etc. Includes all controls. And the large cyclone vacuum pump, manuals for operation. You can also remove the Heavy-Duty piping that runs along the ceiling if you would like to re-use it in your facility. Here is a link to the manufacturer specs and info: NOTE: If you click on the Movie Reel Icon labeled"Papierstaub" middle of page) you will see an actual video of this machine in production! Price includes: Dismantle and Loading onto truck. Please feel free to call/ e-mail with questions: ... more503)701-4623 or nwpe@aol.com
|
|
Pellet Pro Diesel Powered Pellet& Hammer Mill Combination System Includes the following components Pellet Pro Model PP650D-2 Pellet Mill Power: 15HP Diesel/ Liquid cooled/Electric start/Clutch Weight: 700 Lbs. Production Capacity: Up to 600 Lbs. per hr. Dimensions: 32"x30 1/2"x55" Fuel Usage: 1 US. Quart/Hour approx. Material Use: All Biomass Products Pellet Pro Model PP1000D Hammer Mill Power: 15HP Diesel(Electric start) Weight: 510 Lbs. Production Capacity: Up To 1000 Lbs. Per Hour Dimensions: 33" X 31" X 55" Hytrol Hopper Type Belt Conveyor Includes Vibrating Hopper 110 Volt variable Speed Gear Motor Drive(1/3 HP) System can process any biomass. But was being used to make pellets from wood dust& chips. Needs no binder to make pellets. Hammermill can ... moreprocess thin table saw rippings as well as wood chips. Conveyor acts as a metering system for the pellet mill so it does'nt overload. Entire system just out of production and in good working order. Includes spare rollers& pellet dies. Local pick up preferred but will ship. Good Condition.
|
|
|
Bauer compressor with new block Installed 170 hours ago. k18 5 stage 24cfm 6000psi air-cooled high pressure compressor. 20 hp 240/480 volt three phase. Moisture separators. Auto drain, pressure switch for automatic stop control, motor starter, hourmeter. Nominal capacity 24CFM at 6000 psi. Set up for nitrogen can be used for air. You could modify this unit for Cng as well. Just completely serviced( filters. Oil, and belts) This unit runs perfect.For More Info Please Call. Ed 352-207-4001 Posted with
|
|
|
I have a few CNG tanks for sale. All tanks are used. The Item listed for sale is the Type-II 6GGE tank. The custom tank bracket shown in the picture is included in the listing for free. If you prefer to not have the bracket, the tank alone is fine. I have two of the Type 2 6 GGE tanks and they are good to use until December. 2023. These tanks are $500 each. And buyer is responsible for shipping. If you interested in these or any of the other CNG tanks. Email me on here or call or txt me at 217.663.5205. Thanks!
|
|
|
Was used for a natural gas compressor. Posted with
|
|
| DetroitDiesel PowerGuard Primary Fuel Filter, Click to View Image Album Click to View Image Album The item that is for auction is a*NEW* DetroitDiesel Primary Powerguard Fuel Filter SP0770-97-M-BB11 Cage 05GE1 P/N= 2501-4341 2910-01-331-6526_ These items are NEW OLD STOCK! NOS) This offer comes as pictured. No additional items are included in this Auction. Sorry. But due to the Low Price that we are selling these items for WE CANNOT COMBINE SHIPPING COSTS OF THESE ITEMS. Please do not bid if this is not agreeable. NO RESERVE FOR THIS AUCTION A1-10085 Quoted ground shipping cost at bottom of action page is for continental US shipments only. This excludes Alaska and Hawaii. We do not ship until full amount is paid. If item is picked up. It is subject to a handling fee, which will be determined ... morein the Winning Bidder's e-mail. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. We do not ship overseas; however. If you have someone in the USA we could ship to, they could ship it to you. Thanks for looking! Please Note: NOS parts are made by the OEM. These parts can range from 2 to 75 years old and were made to the standards of the year the part was manufactured. Most NOS parts are in good to excellent condition unless otherwise stated. But please do not expect them to be perfect. Most all of our items are government surplus and as such they are subject to have identifying marks such as etchings or paint or other various markings for use by the government for control purposes. Do not bid if this is not acceptable. Quoted ground shipping cost at bottom of auction page is for continental US shipments only. This excludes Alaska and Hawai
|
|
|
The item is a military surplus generator selector switch box with leads. The selector switch is four position Gen 1-Gen 2-Off-Off snap action rotary rated at 60 amp/500 V AC- 60 amp/250 V DC. The indicator light bulbs are burnt out. The box is 12"x 12"x 12" steel with a 2.75"x 3.5" hinged cover over the output bus. Four 3/8" mounting holes in the back. The input leads are 5' and 7' of 4 wire 600V in good condition with most tags intact. I have visually inspected and continuity tested the unit and found it to be in good operating order. Just to buy a new switch of this size lists for around $500. If you are getting off the grid this unit is a good buy considering the price of what the market has to offer.
|
|
Up for sale is a pair of Fuel Maker FM4 CNG Natural Gas Compressors. One has never been used after a recent rebuild. Both compressors work very well and will give you years of service to come. Along with this sale will be two inline low pressure filters with ZEOCHEM media. There is approximately 2/3 of a 55 Gallon Drum of new media. Also included is a High Pressure filter used prior to the fill nozzle. This was my Fathers hobby that kept him busy trying to overcome oil dependency. He has since past on and my Mother would like to see it go. This is everything you would need to used CNG for your CNG powered vehicle. But if you like. I even have a car to go with it for an additional $500.00. It's a 1995 Ford Tarus and it does need some work. When this car was running it ran very good on Natural ... moregas. Out of the 4 cars my father owned over the years, it was the second best running car on CNG. It just needs some TLC. This equipment is for sale locally in West Virginia and Must be picked up locally. This is also for sale locally so I reserve the right to end this auction if sold.
|
|
|
This listing is for an entire system made by FuelMaker for filling natural gas tanks to run a fleet of Fork Lifts at a Bosch Automotive manufacturing facility that we purchased in 2002. We had no need for the fueling system so we have never used it. The system includes 2 Fas Fill stations and(4) FM-4 compressors. We estimate the cost of the system installed at over $60.000. These units are still serviced and parts supplied by FuelMaker and others. This is a great deal for someone looking for a natural gas filling system for a fork lift or automotive fleet. We will disconnect the system and load it on your truck at no extra charge. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f464d5cb4-0xf9-
|
|
Up for sale is an Athens One Horse Treadmill. This treadmill was made in 2008 by Athens Enterprises and is used to run small stationary farm and domestic equipment including but not limited to a log splitter. Washing machine, ice cream churn, hay elevator, vacuum pump, water pump DC generator, air compressor, small hammer mill, grain mill, meat grinder and any other equipment that can be run with a small engine or motor. Easy to use, load horse onto treadmill, release brake and treadmill will spin a pto shaft at 120 rpms and can be stepped up to 1800 rpms with a gear box that is included in this sale. Treadmill can been seen on you-tube search Ferrum College and treadmill to see this treadmill in operation. This sale is for the treadmill. Pto shaft and gear box. Must be hauled on a low boy ... moreflat bed trailer. Unit weighs 2,000 lbs. New these units are $5,000 each plus $600 for gear box/pto shaft. Great alternative energy system, converts a horse walking into useful energy. Buyer to arrange shipping. Cash at pickup.
|
|
selling these 2 capstone fuel valves together. 1-PN: 512035102 1-PN: 503044103 used but good working units. THANKS for LOOKING! ya'll come back Ya hear? Unless stated otherwise above. Item comes with a 10 Day Guarantee against Defect Only, Or if description has wrong information or is Grossly misrepresented. Guarantee does Not Include the following: Misuse in customer handling or installation. Lightning damage, or customer making a mistake in what they bought. I reserve the right to inspect equipment/ item(s) Prior to refund. Buyer will be reimbursed for total amount of item. Plus shipping, and any shipping cost incurred if item is sent back. I expect item to be sent back packed in At least as good condition as arrived. And must include insurance and delivery confirmation/Tracking. item ... moremust be returned within 10 days of arrival. Serial numbers are kept on file. And tamper proof stickers applied. Item will be Well packed. And insured with delivery confirmation. Any sensitive electronic items will be wrapped in Anti-Static bags. If item does not include out of U.S. bidders. Then International bidders should ask Before bidding. Alaska.Hawaii may be higher shipping cost, so please inquire before buying. If more information is need Please contact us. If no answer. Leave name,number and Ebay item you are inquiring about, and an E.C.S. Rep. will return your call. 865)206-2052. 865)446-2112. All Auctions sold as-is. As per the description above, with No Guarantees or Warranties implied unless otherwise stated or if I list wrong information, so ASK before buying.
|
|
Two NGV Systems 90 Liter CNG Natural Gas Cylinder Tanks for Vehicle Up for sale we have a Two NGV Systems 90 Liter CNG Natural Gas Cylinder Tanks in good shape. There were just removed from a Ford pickup truck. We were using them just fine prior to removal. These tanks are in good usable condition. The tanks are rated at 3600 psig service pressure. 90 Litres water capacity, 940 SCF capacity. Approvals: DOT 49. CFR 579.304 Type 2. Great deal on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer is responsible for shipping charges. The shipping weight is 556 lbs and the dimensions are 64" L x 34" W x 20" H. Unit will be strapped to a ... morepallet and shipped from Hayward. CA 94545. Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now!
|
|
|
This a used cng tank that was removed from a pickup truck. It comes with everything that is in the pictures. The expiration date is 7/2018 on this tank. This a large and heavy tank. Pallet in pic is a standard size pallet, so it will have to be either for local pickup or you arrange shipping. I can load with a forklift with prearrangement. If I can answer any questions I will do my best. Offers will be considered. thanks for looking
|
|
|
I have two Lincoln Composite Tuff Shell Type 4 CNG Tanks model number RH36A-16-07107 The Exp. Date is 9/2030 16"x6' You Can Call@ 404-973-8362
|
|
Parker Balston H2-500NA Hydrogen Generator* Left Side: Right Side, Manufacturer: Parker Balston Model: H2-500NA Description: Hydrogen Generator Condition: Used Packaging Condition Details: Not in original manufacturer packaging. Please Note: As shown in the pictures below. There are scratches on the housing of this unit. There is also a support brace(for the lid) across the top of the generator that is slightly bent. It also has two nuts missing that hold the support to the top. There are no instructions or documentation included. No power cord or other cables or tubing is included. The No Hydrogen Flow light(third light from the top; see picture of front of unit) blinks when turned on. This unit is being offered as USED. PRODUCT TYPE GAS GENERATOR HYDROGEN PRODUCT PURITY 99.99999+% FLOW RANGE ... more500 cc/min DELIVERY PRESSURE 0 to 100 psig*This item is not eligible for combined shipping. This item is guaranteed to power on only. No other functions have been tested and therefore are not guaranteed. Includes: Parker Balston H2-500NA Hydrogen Generator Packaging Condition: Not in Original Manufacturer Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for
|
|
|
Curtis 1237-3402 Curtis Motor Speed Controller. Voltage: 36V, Max Current: 160A, 0-5k Input, Permanent Magnet. Curtis PMC Models 1227/1237 are designed for large permanent magnet motors, such as those used by large mobility aids, scrubbers, personnel carriers, small golf cars, small walkies etc. Comes with wiring harness, matching 36 volt coil, power plug. Sells new for $544.75.
|
|
|
ANG Absorber Accumulator Cylinder DOT approved 500 CC Used on ANG filling Equipment 304 Stainless Steel Body Cost New $250.00
|
|
|
FuelMaker FM4 CMG compressor in good condition. The unit worked fine when the guy I bought it from totaled his truck. I bagged all the connection and stored it in my garage. I was going to convert me 1993 truck. I had planned to send it to studebkrjack in Englewood. Ohio. He will provide an estimate to rebuild the unit and guarantee it. This is a perfect chance to get a CNG compressor for about half the cost of a rebuilt unit. The tank does need to be tested and recertified. Good luck! I prefer local pick up but could arrange shipping if required.
|
|
Up for auction is a almost brand new 32 h.p. GH300 pellet mill. Has no more than five hours on the machine. Bought in beginning of April this year and only produced 5oo pounds max of pellets with this machine. Dont have the time like I though I would to use it. 32 horsepower diesel motor with 12 inch die. This is manufactured to produce 100% wood pellets. It is roller driven, and the die is stationary. Works excellent, and produces good hard pellets. Has electric start, and evaporative cooling. Can use all sawdust, or any bio product to produce pellets. Starter button broke, and did not replace it, have been starting by connecting two wires and fires right up. For further information check out gardenheat.com. This is where I bought and had this delivered to me from. Will include battery, and ... moremoisture meter which is crucial to get the right moisture content to make good pellets. Battery and moisture meter were $200.00. As is no warranty, will not ship. Pick up only. I did mount heavy duty caster wheels which are included to the bottom so it can be rolled around on your shop floor. The caster wheels were $100.00. I have over $5.000.00 in this machine with delivery and all the extras. This is practically a brand new machine. Includes manual. Please email with any questions, buyers are encouraged to see item before bidding. No shipping. All sales final, as is no warranty. Pick up only.
|
|
Up for sale is an entire pellet mill operation. Including all of the items needed to start your own fuel pellet or animal feed buisness. The set up includes everything needed from the conveyor belts the raw material hoopers and feeder the mill, the conditioners, coolers, baggers, shrink wrap machine, and much more. This operation is capable of producing 1-2 tons of material an hour depending on the raw material and conditions, and can easily be run by one or more individuals. The mill has been used to produce fuel pellets for the past 5 years for a small comany in NC. the machine has been very well maintained and constantly updated with new parts to keep it in the best shape. I have personally assisted in operating the mill dozens of times over the years and would be happy to awnser any questions ... moreyou may have. This would be a great opprotunity for somene to start their own pellet fuel or feed pellet buisness and make a very good living with not a lot of overhead or startup cost. Below is a list of all of the items that come with the operation my name is Trey and feel free to contact me any time through messages or phone number 336-209-2987. 150 HP California Pellet Mill DS PELLET MILL WITH CONDITIONER, EAGLE 30-660 DISCHARGE HOPPER 215 CUBIC FOOT, SOFT START FOR PELLET MILL, MEADOW MODEL#35 HAMMER MILL, COLLECTOR 12' TALL, SAMUEL KENT INCLINED WASTE 10' LONG 12" WIDE, CPM 2GA2 VERTICAL COOLER, BIN WITH RECONDITIONED JEM GB-32 BAG SCALE, PSI DUST COLLECTION SYSTEM, DWAN BAG SEALER WITH 6.5 CONVEYOR, TEMPEST BLOWER S SERIES INDUSTRIAL CYCLONE, 28' LONG HY-CAP 12" BELT CONVEYOR, 24' LONG HY-CAP 12" BELT CONVEYOR, 20' LONG HY-CAP 12" BELT CONVEYOR, PLATE MAGNET, MIMI-SHRINK WRAP MACHINE, MISC. PARTS(DIE,ROLLERS PARTS, STORAGE BINS)
|
|
|
greasecar co-pilot computer controller This unit was just removed from my greasecar WVO system. It works great. The action is for the computer controler. And the RAM windshield mounting system only, as pictured. All other accesories for the greasecar system or the computer are not included. These computers go for $400 from the company website. This would make a great affordable replacement for your greasecar system. Shipping $10 to lower 48 states. No international sales. No returns. Thanks. And good luck bidding.
|
|
ATOMIC ENERGY OF CANADA 1981 Korea Electric WOLSUNG 1 Nuclear Plant ASHTRAY RARE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Up for your consideration is this really unusual solid brass souvenir ashtray. This appears to be a presentation piece commemorating the completion of construction of the Wolsung-1 nuclear power plant in South Korea. The plant was completed in 1981 and opened the following year after certification. From what I can find out. The construction of the plant was managed by the Atomic Energy Of Canada Limited company, a Canadian based nuclear power company, which has been active since the 1950's ... morein developing electricity from nuclear reactors. The name"P. G. Dahan" is cast into the center of the tray above the date. I could find no information on this person, but assume he may have been in charge of construction. I'm guessing this is one rare ashtray. Comes in it's original presentation box complete with what I assume to be the original tissue. I doubt you'll ever see another. The ash tray measures nearly 9 1/4 inches in diameter and is 1 3/8 inches tall. It is a very highly detailed casting with polishing. It was made by the Ulsan Grand Company. Which I believe to be a South Korean firm. The sticker on the back is still intact. The raised inscription reads"Atomic Energy Of Canada Limited nuclear construction managers Korea Electric Company Wolsung-1 nuclear power plant" in English and correspondingly in Korean beneath it. Wonderful design and detail. No evidence it's ever been used as an ashtray. In the raised center is an atomic symbol over a pyramid and the inscription"P. G. Dahan Jul. 1981" Has a couple tarnish spots to the back and a super light dimple to the rim, which is not noticeable unless the piece is tilted properly to the light. The ashtray weighs a hefty 1 3/4
|
|
|
Bidding on an Smart Fuel Cell A25. NO FUEL IN THE CANISTER! Unknown condition. Don't believe it's been used. SOLD AS IS. 12V 8.5A Output.
|
|
|
1908' Waterhouse& Lester Invoice for 2 Tons of Coal GREAT GRAPHICS CONDITION: FOLDED- VERY NICE CONDITION WILL SHIP FIRST CLASS IN A PROTECTED LARGE ENVELOPE YOU WON'T BE DISAPPOINTED WILL ANSWER ALL QUESTIONS On Jul-08-13 at 05:01:37 PDT. Seller added the following information:
|
|
Auction consisting of 1- satellite fuel tank hydrazine nitrogen tetroxide space flight titanium empty Weights aprox. 9.3 lbs. dan local pickup is available by appointment at no cost. It sometimes take me up to ten(10) days to ship items if you are in a hurry to get your item move along to the next auction. Ebay nor anyone else will ever tell me what types of payments I will accept so if you want to pay with some sort of paper payment feel free. Just send me a message asking for my mailing address. Will only ship to U.S. addresses. Foreign bidders will be approved to bid only after providing a U.S. shipping address. Delivery is available for everything I sell I charge $20 per hour plus actual fuel cost my van gets 21 mpg diesel I have a passport. I can have things hauled to Fort Collins once ... morea week. Since ebay is forcing a limited number of condition selections you the auction browser. Bidder or buyer will have to learn to ignore that condition selection whatever it may be as there is no unknown Age, history and operating condition choice. Items may have some scratches. Image is Actual. Click Image for LARGER Version
|
|
|
FuelMaker FM4 CNG Compressor Refueling Station 3000 PSI Unit- Could be used with 36000 PSI tanks Single Phase- 220 Volt Comes with Hose and Connector Had new compressor when I purchased it. I used it Approximately 250 Hours. Machine shows 650-Max hours remaining to service. Refueling Station is still installed and working and can be demonstrated. SHIPPING is the Responsibility of the buyer. We only sell to buyers in the lower 48 States.
|
|
|
187 pages including index. Every thing you need to know in order to heat with coal. Know the types of coal. The best for economical heat. how to manage a coal fire for overnight burning. know stove or furnace size& type to meet your needs. SAVE MONEY WITH COAL HEAT! Powered by
|
|
|
You are bidding on a lightly used electric 8mm die Agico pellet mill. Model: ZLSP D-Type 120A Capacity: 70-150KG/H Power: New 5HP 240/480 volt 3-phase electric motor with GS2 VFD Net Weight: 120KG/264 LBS Outside Dimension: 870x440x730 MM. 48x36x18 INCHES Comes with spare die plate and roller set. This was only used for a recycled coffee pellet R&D project.
|
|
|
ASME UPV Code Section VIII. Div.1, 1998 Addenda 1999 and Appendix 22,SF=3) ASME SA 372 Grade J. Class 70 4 3 2 left Asking: $ 45.000 each 17.000 scf at 5,500 psi(138 gge) g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-140eba73d3b-0xf3-
|
|
|
In 1978. Zurn Industries of Erie, Pennsylvania prepared and published this 20-page catalog, Keystone Steam Generating Systems, for distribution to its customers. Packed with photos, drawings, tables and charts, the softcover book provides detailed technical information on steam generators manufactured at its Erie factory. Sized at 8.5" by 11" the catalog is in very good condition. Please add $3.95 postage and handling for shipment within the U.S. only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-140eba73d50-0x101-
|
|
|
Up for bid is a Snyder 60 gallon tank assembly w/ stand in good used condition. It was used indoors and held DEF fluid to test DEF components in our engineering lab. Details: Tank Snyder Industries 60 Gallon Double Containment Tank Assembly(HDLPE) Snyder 1000300N 60 Gallon DCT(Dual Containment) 14” PE Threaded-Vented Manway w/11-3/8” Access• 2” PVC Bulkhead Fitting with Viton Gasket& Micro-Matic container valve Stand Snyder Industries 60 Gallon Double Containment Tank Assembly(HDLPE) Snyder 169023 30” Plastic Stand• 12” Nominal Bottom Clearance It is fully functional and being sold as is with no warranty. Please ask specific questions prior to bidding.
|
|
|
Bought this item from an estate auction with WWII veteran items. After much research. Discovered that this item looks to be a Vapor Carburetor. Charles Nelson Pogue invented a carburetor that vaporized gasoline. This item looks identical. The photos show all of the details of this carburetor. The box has slight camouflage coloring on the outside.
|
|
|
RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14115f2022d-0xf4-
|
|
|
Up for sale is a Commerical Alcohol Still on a trailer. I think it has a 1500 or 2000 gallon mash tank. It has all copper tubing and its own attached boiler that work on firewood or convert to LP This is located in Southern IND. If you are really interested contact me for pictures. I have the old manuals that came with this back in the'80s. Cash only on pick up of unit.
|
|
Simple Centrifuge. Made in the USA. This is a beautiful centrifuge made with a Simple Centrifuge drum. The bowl is aluminum. The frame is steel and it has a clear plexiglass top so you can see the oil as it cleans. Note: When Simple Centrifuge started you could only buy their drum and then you needed to make your own centrifuge using their drum. This is a centrifuge made that way. Clean waste vegetable oil(WVO) Bio diesel, lube oils, and even hydraulic oil in your garage. Purchased this unit a couple of years ago, and have cleaned hundreds of gallons of Waste Veggie Oil with it. VERY reliable unit! I tried many different filtering methods but found this unit was the most thorough and economical to use. I paid just over $1.200 for the unit. You can visit the company website SimpleCentrifuge.com ... moreto view the unit in action. I sold my veggie oil truck and am liquidating all my equipment. The centrifuge works perfectly. If you're in the market for a good quality centrifuge. You can save hundreds of dollars by purchasing this unit. Stands a little over 3 feet tall. It has a few small blemishes(you'd have to look hard. Mostly a ding here or a scratch there) and is ready to use right out-of-the-box. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This unit was installed in 2000 and was last used in 2007 and was operational. Manual and installation details included. Weight approximately 150 pounds. Operates on 115 V and 7A. Fill your compressed natural gas! A 10' fuel nozzle is included with a spare! Posted with
|
|
|
Propane fill adaptor. 1-3/4 acme x 1-1/4 forklift valve fitting. Guarantee to work. Payment must be made within 5 days. Thank you
|
|
|
Used Rego 7547 3/4" fill valve. New paint with a new operating mechanism. Has a bleeder valve. Guarantee to work. Payment must be made within 5 days. Thank you
|
|
|
This is a Factory Remanufactured GFI Teleflex Compuvalve for a Ford Contour. I have tested this unit myself and it works perfect. These are very rare to find and if you can find one at the dealership they sell for $2500 and up. You can email me with questions about if it will fit your vehicle and I will do my best to help you figure it out. Posted with
|
|
Get a check from PG&E! 40 beautiful acres along the Middle fork of Cottonwood creek with a functioning hydroelectric plant. Sale includes license. Powerhouse, dam, land and equipment. The plant has 55ft of static head with a max capacity of 106CFS. This is a run of the river prject. The turbine is a crossflow type built by Hydrostock and later rebuilt by Canyon industries. The generator is an Allis Chalmers 180 RPM 40 pole from 1913. This is a very cool property in a remote part of Shasta county. Plant is 5 miles in through a locked gate and part of a private hunting club. The land also offers gold panning in the creek as well as hunting and fishing. Option to buy an additional adjoining 40 acres with cabin and timber. There is also a backup PV solar system and potential to increase revenue ... morewith the sale of renewable energy credits. This property needs a motivated owner who has a basic understanding of hydro power.
|
|
|
2650 gallon 304 type stainless steel rectangular storage tank measures 5’9” wide X 57” high X 13’0” overall in length; was manufactured by EPS International in 2002 having a MFG serial# 10322-02-01. Exterior of tank& frame support structure are epoxy coated. Tank is supported on a steel skid support structure and has various fittings for plumbing. A detailed drawing. Additional pictures and free freight quotes are available upon request. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14191bd9ada-0xfb-
|
|
|
Wizard stick smoke pencil by Chimney Ballon Co. Powered by 6-AA batteries. See details at Chimney Ballon web site. Posted with
|
|
|
Kimberlite Solid( gold) Available. hornetlodemine@hotmail.com
|
|
|
Advertising card for the C.Reiss Coal Company in St Paul. Minnesota. Front has picture of ship with the title"Plying the Seven Seas" and signed Mettel. Telephone is Garfield 5341. Front has calendar page for Dec. 1932 and Jan 1922. Back of sign has prices for coal. Interesting, who knew you could buy either"Egg,Nut, Stove,Pea or Buckwheat" Is that the size of coal? Or what about this"All coal dustless treated if desired-without extra charge" Measures approx 5 1/4 wide and 10" high. Really a cute piece to hang on the wall.
|
|
|
Fuelmaker FM-4. 3000 psi Natural Gas Compressor Appliance to refill your CNG vehicle. Works on both 3000 psi and 3600 psi vehicles. Has 10 month old brand new compression head. See receipt $1800.00. Runs on 208-220 volts, unlimited hour chip. Selling due to upgrading to larger unit. Compression head has 14 months and approximantely 1000 hours warranty time remaining. Compresses.9 gasoline gallon equivalents per hour. I have large shipping crate if needed for additional $49.00. I will assist in crating and loading into truck. Buyer to arrange shipping. Presently hooked up and pumping gas, come see it work. Also selling 2012 Honda Civic Natural Gas 37k miles, and 2006 Honda Civic GX Natural Gas 140K miles. Posted with
|
|
|
Used Ariel CNG Compressor package with Caterpillar natural gas drive engine. Fully enclosed. Buffer tank. Air compressor, filters, electronics, cooling fan, etc. This unit can compress 100gge/hr with adequate inlet pressure. Station was in service until fall 2012. Very good condition. This listing is for the compressor system only. Dryers. Dispensers, and storage are not included in this sale. Located in Pennsylvania. Local pick up or you arrange delivery separately. We do not sell or ship to California. Item is also listed for sale locally.
|
|
|
SPECS PAGE SAYS: THE DISCOVERY FUEL-CELL SYSTEM IS RATED TO DELIVER 3 KILOWATTS OF AC ELECTRICAL POWER CONTINUOUSLY AT 120/240 VOLTS AND 60 HERTZ. THE SYSTEM CAN SUPPLY PEAK POWER OF 10 KILOWATTS OF AC ELECTRICAL POWER AT 120/240 VOLTS AND 60 HERTZ FOR 45 MINUTES" DIMENSIONS OF UNIT: 36"X28"X 62" WEIGHT IS ABOUT 700 LBS. THIS UNIT SEEMS TO BE COMPLETE. BUT WE ARE UNABLE TO TEST, IT IS BEING SOLD AS-IS. FREIGHT SHIPPING WILL BE AT BUYERS EXPENSE, FREE FORKLIFT LOADING AT OUR SITE.
|
|
Rix CNG compressor Model#3k3g-25 Serial# 7846 Designed for the compression of natural gas(CNG) Operating Parameters 8PSI inlet pressure 3600 PSI Discharge pressure 30scfm. Electric control system is designed for NEMA 7 environment. Operating pressures. First stage 100 PSIG. Second stage 560. Third stage 3600@ compressor RPM 620. Electric motor 20 hp 230 volt 3 phase 1800 rpm. Full schematics and manual are available with the unit. The unit is currently inoperable. A gasket leak allowed water into the block and the crank is split. A new crank will be required or this one must be repaired. New this is a hugely expensive piece of equipment. I have been told it can produce 16gge per hour of compressed natural gas. Questions or additional pictures call. Bob 773-960-5642. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-142ff1a15b7-0xf5-
|
|
DESCRIPTION: Bought this unit brand new about a year ago. Only used it a few times…it works awesome in cleaning WVO and WMO! Didn’t try it on anything else. USES: Cleans a Variety of Fluids- You'll gain the ability to produce fuel quality oil from a variety of waste oils including motor oil. Vegetable oil, ATF and hydraulic oil. Extract Dirt and Water- Remove particles and unwanted fluids with this powerful and effective tool, processing up to 25 gallons/hour! Powerfully clean a variety of oils. Even the really nasty stuff. Facilitate your oil processing. Saves you time and money. SPECIFICATIONS: Engineered for Waste Oil- High Quality Aluminum Castings- Custom Baldor Motor Flow Rate: 5-25 gallons/hour(19-95 liters/hour) factors are heat and how dirty the oil is to begin with Overall Height: ... more18" Overal diameter: 18" Hose Fittings: 3/4" hose barb fittings included Rated for Continuous Use Handles a variety of fluids- Water. Diesel, WVO, Motor Oil, Biodiesel, ATF, Gear Oil, etc. Rated up to 400*F
|
|
|
15 foot Fuelmaker hose. Rated at 3,000 PSI. Used but appears in good condition(no cuts or breaks) I have no way to test it, so if it is DOA when YOU test it, I will accept returns with 14 days of end of receipt of item. No reserve. FREE shipping to the 48 contiguous states!
|
|
|
Used Fuelmaker FMQ 8-36 with manual 4.5 gge per hour Storage available. Sold separately. Dryer available. Sold separately.
|
|
Waukesha Cogeneration Handbook Condition: Near Mint Condition Vintage: 1980s This was one of the better booklets covering cogeneration application and installation. It has lots of application and installation data needed to properly size and install engine driven generators sets into applications where you are producing electricity and recovering waste heat off for use in process. Great collectors item or for everyday use if you work in gen set applications. We try to represent all our auction items and their condition to the best of our abilities but still welcome any questions you may have about an item. We will try to answer all questions in a timely manor(usually within 24 hours) All communications should be handled through eBay messaging. All photos: Are of the actual item being auctioned ... moreexcept on multiple item fixed price listings which show a picture of only one of the items. If all are identical and in the same condition. Shipping: Ship within one business day following confirmation of payment. We normally ship via USPS with online tracking provided. Some heavy items are shipped UPS and will be specified in the listing. Ship only to addresses confirmed as PayPal"ship to" address. No international bidders or shipping No reverse billing. COD or third party shipper account billings for shipping costs. Associated shipping costs must be paid prior to the item being shipped. Returns: 14 day returns are accepted if an item has been misrepresented. After receiving an item buyer should look it over immediately and contact us as soon as is possible through eBay messaging to explain any issues they have. All items must be returned in the same condition they were shipped out in prior to a refund being authorized. A returned item’s purchased price will be issued through PayPal only. Initial shipping costs are not refunded. Buyer pays return shipping costs. All items returned for a refund must be shipped by the same method it was received with a tracking number. Bidding Conditions: Please remember that your
|
|
BEST CHRISTMAS PRICE! Before bidding please contact me at garciag641@gmail.com. I would like to explain my TERMS of sale. Buy it now option available. Before bidding please contact me at garciag641@gmail.com to get shipping quotes. This is a Coltri CNG Compressor(Model) MCH 5 Made in Italy 3600 P.S.I. It will only connect to a 3600 P.S.I. receptacle and will not work on a 3000 P.S.I. Setup. This unit has 230 Hours on it and has been in storage for the last couple years. It was in working order when we took it out of service. It was taken out of service because we started using a cascade system along with the fact that a local Mobil put in a mega station. It fills at the rate of 2 Gasoline Gallons Equivelent Per Hour. It was well taken care of being that it was in a covered but fully ventilated ... moreenclosure.
|
|
|
Vintage Power Bag From West Virginia Coal Mines# 33 12 1/2 inches long 13 1/2 inches wide Strap is 44 inches long 2 1/2 inches wide
|
|
I have three of these to sell but only listing one(1)here in this auction. People sending in offers of $1000 is nuts. This unit can start in sub freezing temps on a dime. Originally sold for $19.000 dollars. These burn gasoline and have spark plug and carb. If you looking at this item then you probably know more about this heater then I do. What I can tell you is that I purchased these from my local airport up here in Maine and all seam to be taken real good care of and stored indoors.The year on these is like in the 90's I think. Serial number should confirm it. New Page 1 EMAIL and QUESTIONS: Please use eBay's email to contact us or@ 207-433-7802 and ask for Shannon. I will try to answer or return emails within 24 hours. During regular business hours Monday through Friday. All messages ... moremust be sent through ebay.com, no other emails will be answered. WARRANTY AND RETURNS: Everything we sell here is*AS IS WHERE IS* with no warrantee unless specified in this add. No returns acceptred unless specified in this add. Buyer is responsible for shipping unless specified in this add or we make other arrangements through Ebay Email. SHIPPING CHARGES: Customer is responsible for all shipping cost unless specified in this add. I can store these up to 90 days and load for free. I do sell a few things I ship from time to time but almost never Heavy Equipment or Trucks. If you need shipping maybe we can work on it together.
|
|
|
A full semi truck full of this material is up for auction. It burns well. Is super absorbant, and will insulate like a dream. They are trimmings from a medical product we run here in NW Ohio. It's Non hazardous and takes up quite a bit of space we are looking to reclaim. If you want a couple to try, or a whole truckload let me know. We can make more also. We will help load on truck you pay the freight or local pickup is always welcome.
|
|
3) Ariel JGJ-2. Size 6.375” x 3.875” x 2” 400 HP@ 1800 RPM electric drive Ariel Compressor Frame Model: JGJ-2 RPM: 900-1800 Stroke: 3.5” Rod Load: 40.000 S/N: F-11332 General Electric Motor HP: 400 RPM: 1785 Volts: 460 Amp: 433 Frame: 5011LL Model: 5K511CN2294P Type: K Phase: 3 Hz: 60 KVAR: 59.3 S/N: WL6373005 1st Stage Ariel Cylinder Class: JGRJ Bore: 5.125” Stroke: 3.5” MAWP: 1500 w/ VVCP S/N: C-31891 2nd Stage Ariel Cylinder Class: JGRJT– CE Bore: 3.875” Stroke: 3.5” MAWP: 2200 S/N: C-31892 3rd Stage Ariel Cylinder Class: JGRJT– HE Bore: 2” Stroke: 3.5” MAWP: 5280 S/N: C-116493 Air X Changer Model: 60VV Job# 963042 B Skid Dimensions: 28’ 9” L x 14’ 3” W x 11’ 10” H Chris Wylder 25048 Anza Dr. Valenicia. Ca. 91355 Phone: 661)257-8000 Fax: 661) 257-8009 Cell: 661)993-9206 336.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14319693e8e-0xf4-
|
|
|
Gemini CNG Compressor Model: HPDD Size 3” x 2.5” x 1.25” Stroke: 3” S/N: C-5429A/ C-5429B Engine: Caterpillar Model G3408TA S/N: 6NB01304 Gemini CNG Compressor Model: HPDD Size 3” x 2.5” x 1.25” Stroke: 3” S/N: C-5430A/ C-5430B Engine: Caterpillar Model G3408TA S/N: 6NB01305 For more information. Call(661) 257-8000 or email us at sean@compressionsource.com
|
|
ArielJGA-4/CAT G33408TA Compressor Pkg ArielJGA-4 Frame Stroke:3” RPM:900-1/800 RL:20.000# SN:F-12325 1 st Stage Ariel2.75” JG Cylinder Bore:2.75 Stroke:3” MAWP:2550 SN:C-35310 Ariel2.75” JG Cylinder Bore:2.75 Stroke:3” MAWP:2550 SN:C-35309 2 nd Stage Ariel3” JGT Cylinder Bore:3” Stroke:3” MAWP:2550 SN:C-35313 Ariel3” JGT Cylinder Bore:3” Stroke:3” MAWP:2550 SN:C-35311 3 rd Stage Ariel1.5” JGT Cylinder Bore:1.5” Stroke:3’ MAWP:5280 SN:C-35312 Ariel1.5” JGT Cylinder Bore:1.5” Stroke:3’ MAWP:5280 SN:C-35312 CATG3408TA Engine RPM:1800 Arng#102-9398 SN:6NB01589 EngineHrs: 592 KunifinCooler Engine/WaterJacket MAWP:100/100 SN:V7230-97-3 MAWP:900psi@ 2400/5500F Temp:400F@ 400psi SN:V7230-97-1 For more information. Call us at(661) 257-8000 or email us at chris@compressionsource.com 336.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14319693ecd-0xe3-
|
|
|
THIS COMPRESSOR HAS ABOUT 50 Hours on it when BEARINGS Went BAD!Y ou Are bidding on a NEW Home/Office CNG.Natural Gas Refueling Appliance. House pressure@7.5"W.C. to 5PSI for 2GGE Output. What you put in you get out. NOTE: This Is Three Phase Power@ 60HRZ. NO FUELING HOSE AND OR NOZZEL is NOT INCLUDED. OPTIONAL REBUILD KIT IS AVAILABLE@ $500.00 FOR TECH SUPPORT CALL BOB@708-343-4747 DISCLAIMER: If you do not know about high pressure compressors and Fueling Appliances. And do not have the ability to conform to all U.S. Gas Standards, PLEASE do not Bid or Purchase. Thank You for your Understanding. If You Need me to help with shipping. Just Ask! WEIGHT IS ABOUT 350 Pounds. Thank You.
|
|
|
LPG-Vaporizer/Air Mixing System from Alternate Energy Systems. Inc. Model WB-1000 Used to convert from electrical power to propane gas in a large textile mill in NC. Price list new was well over $150.000. Serious inquiries please feel free to contact with questions!
|
|
I am listing this turbine for a friend of mine who is not particularly computer savvy. I will provide his email address and phone number for you to contact him directly. As I have no knowledge of the unit. He will provide any information you might need and is VERY motivated to sell the unit, so please feel free to make him a reasonable offer and you just might own this great unit! This is an Obermeyer Semi-Kapian Turbine that developes11 hp under approximately 12-14 head. Operating at 1240 rpm. The generator is rated 7KW, 240 volt, single phase. The unit was installed in 1983 at a cost of nearly $10,000. in a dam in Massachusetts and operated until the dam was condemned. My friend bought it with the intention of installing, perhaps in his sawmill, but unfortunately never got around to it, ... moreso now will sell to the next lucky owner. Obviously the worth of this unit has increased a great deal since it was new. Ken is the name of the owner and his phone number is 860-428-4874. His email is sigfridson@juno.com. He loves talking about this type of machinery and as mentioned, motived to sell the unit, so he is negotiable. As a special incentive he will deliver the unit anywhere in New England for free, providing an agreeable amount has been reached and has been paid in full. Shipping this unit anywhere else, will have to be calculated by the destination where the new buyer is located. I know that there will probably be many questions. So I highly recommend that you contact Ken. Thank You for viewing our ad and good luck in bidding. Please bid to own as this is time consuming and expensive and not a joking matter. Good LUCK!
|
|
|
From an estate. Fair condition. Paperback. 83 pages. 6 X 9 1/4 inches. Not a library book. Many photos of heavy machinery. Boxed shipping. Please see photos.
|
|
|
You are bidding on three USED kidney stones that were passed by Amazon founder and CEO Jeff Bezos. The stones were passed without surgery. Meaning they traveled all the way through Bezos's penile canal. They will ship with a glass jar that has hospital label of time, date, location, and Bezos's name. For serious collectors only! No returns. Posted with
|
|
|
This is a Fully Rebuilt& Fully Tested GFI Compuvalve Unit. I have personally been driving the unit on my truck for past month and it runs perfect. Please email me with any questions on the fitting of this unit on your model vehicle and I will make sure it will work on yours. If you have a Compuvalve unit that needs to be rebuilt please send me an email and I will help you with getting that done. Thanks Posted with
|
|
NOTE: Although it says this item is for pick-up only. I will be happy to assist with shipping. See below for more info. This is a home version of the Phill Fuelmaker line of CNG(Compressed Natural Gas) home fueling station/ compressor. It is intended to allow home users to fill their CNG vehicles by hooking up to their home natural gas line. I got this used from a friend who put very few hours of service on it. He sold his CNG vehicle fairly early on and had no use for this. When I got it. I planned to purchase a CNG vehicle so that I could ride alone in the carpool lane on my commute to work. However, I no longer commute and only drive about 5 minutes to work so I've never even hooked this up to use it. It has been sitting unused for over a year for sure and I have no way to verify that ... moreit's in 100% working order. I don't have a reason to believe it won't work but I'm selling it as-is with no guarantees so bid accordingly. A few days ago I plugged it in and ran the test to show how many hours are on it. It powered up properly and hummed and indicates that it has between 500 and 749 hours of use so far. It is a model HRA-P36-002 which is the 3600 PSI model. It should have everything needed to attach to a natural gas line and fuel a vehicle. I have all documentation including the original purchase invoice and manuals. The person I got it from was rather detailed when he disconnected it from his garage and gave me 8 pages of photo documentation of how everything was connected when he pulled it out. All of these photos and manuals will be included. It's definitely an older model fueling station so do your research to be sure this is what you need. It's very clean and has been well taken care of but as I said. There's no way for me to check it out further. You are welcome to come by and take a look prior to bidding if you like. It's located in Martinez. CA. I am putting that it needs to be picked up only although I'd be happy to have you ship it if needed. I just don't have
|
|
|
Living on 12 volts Good condition old paperback book. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143950c1d8c-0xfa-
|
|
|
2006 yr. bowl s/n- 3530879 frame s/n- 3530879 40HP motor included.
|
|
This is a barely used WVO Designs 6000 RPM Centrifuge. The exact setup that I am selling here. Costs $1597 new from WVO Designs. Their Ebay item number is: 281206643653. I bought this centrifuge about a year ago and centrifuged approximately 200 gallons of oil. It works very well: it is very well balanced(no vibrations even at 6000 RPM) and it pulls the finest particles out of the oil. I am selling it because I started looking into all the certifications that would be required to keep large quantities of oil on my property for what I wanted to do. And it was more trouble that I was willing or had time to deal with. As long as you aren't storing large volumes of oils/fuels on your property, you don't need any special certifications. This model has the extra triangle shaped metal piece ... morethat bolts into the middle of the centrifuge wheel to speed up and economize the oil cleaning process. That wheel has 3 bolts that hold it in, and one of the bolts goes in a little loosely. It might be a good idea to tap a hole for the next size bolt and replace the bolt. This centrifuge plugs into normal household outlets and runs very quietly. The little white box is a control unit for the motor on the centrifuge that allows you to adjust the speed of the centrifuge. Everything is guaranteed to be in full working order. For any questions, please feel free to email or call(910) 603-4074. Thanks! Posted with
|
|
Please Contact Us With Questions The ST-5 is a multipurpose external-combustion engine designed for those who either cannot obtain grid electricity easily and economically or have realized the uncertainty of total dependence on utilities to supply their power needs. Virtually any combustible material is a suitable fuel for the ST-5. Among various acceptable fuels are wood. Wood pellets, husks and chaff, peanut shells, weeds and hay, cotton waste, other agro-byproducts, and natural gas. Rugged and reliable, the ST-5 has no spark plugs, carburetor or fuel injectors and is much quieter than than an internal combustion engine. The ST-5 is an external combustion Stirling cycle engine which boasts: Over 5 HP Of Shaft Power At 650 RPM- Level power output over a range of speeds, Multi-Fuel Operation- ... moreproduce your own fuel and be truly energy independent No Spark Plugs. Carburetor, Distributor, Muffler, Injector- few failure modes Reliability- low maintenance and service requirements result from simplicity of design, Quiet Operation- fuel is burned continuously outside of the engine so noise is minimal Little Pollution- minimal carbon monoxide. Unburned hydrocarbons, nitrogen oxides Absence of Oil- no need to monitor and change oil Safety- no boiler or high pressures as with steam engines, Long Life- high quality bearings. Seal materials, commitment to quality control User Serviceability- field repairable with basic tools and the service manual High Quality-SOLD AS IS Selling Without the Blue Barrel Burner We can arrange freight shipping. Shipping is not included in the final price.
|
|
The Green Spin Centrifuge was designed specifically for cleaning particulate from waste oils and fluids. This design does not include a cut-off valve. Which after multiple uses becomes inoperable and will cause the centrifuge to work at a diminished capacity or not at all. The centrifuge works by means of centrifugal force and is capable of cleaning fluids to one tenth of a micron. High pressure oil is pumped to the centrifuge and sprayed from opposing jets to spin the rotor at speeds approaching 8000 rpm to remove particulate from the fluid. This force extracts solid contaminants from the fluid stream and deposits them on the inner wall of the cleanable rotor as a dense. Solid cake. To clean WVO. Settle the dirty oil in a separate container and filter to at least 100 microns to remove the ... morelarger particles out of the oil. Heating the WVO to a temperature of 100°F will lower the viscosity and allow suspended water to settle. The oil needs to be heated for the oil to move through the centrifuge. The fluid should flow like water for the centrifuge to work properly. Fluids other than WVO may or may not need to be heated to achieve the desired viscosity. Temperatures of at least 150°F must be maintained and temperatures above 180 degrees are not beneficial. If you complete enough passes. The centrifuge will polish the oil to NEVER allow the pressure to exceed 100 psi. Over 100 psi will cause damage and void the warranty. The rotor will need to be cleaned approximately every 150-200 gallons and will take 5-10 minutes to complete the process. The rotor will be extremely hot and will need to cool prior to cleaning. You have the option of purchasing an extra rotor to use while cleaning the dirty rotor. Flow rate: 1 gallon per minute or 60 gallons per hour Inlet port: 1/4" FNPT inlet port Rotor capacity: 12 oz. of contamination Need to be cleaned: Approximately every 150-200 gallons Dimensions: 5” in diameter and 6 ½” tall PSI: 85-90 PSI for optimum performance You need to purchase a pump with motor to
|
|
|
This is a used 300 gallon conical poly tank with the stand. These are about $600 new with the stand if you get a good deal on them. It was used for used vegetable oil and still has vegetable oil residue in it. Email or call with questions: 910) 603-4074 Posted with
|
|
|
Report On Bonneville Power Administration's First 25 Years 1937-1962 Folded once horizontally once vertically to 8 x 10 1/2 BPA 25th Anniversary contains pics and a map of coverage Name written on upper right cover. Otherwise good condition Posted with
|
|
This unique Steam Engine was produced in America in 2008. It has features that allow it to be used as a steam engine. As a pump and as a compressor. It is approximately 60 cubic inches. The pistons are external without a fixed block. It has a Z-shaft and thrust plate. The piston rings can easily be changed with a quick removal of the entire cylinder. It can be mounted and run in any position. This particular engine has less than 10 running hours on it. It seems to have a sweet spot for running between 400 and 800 RPM's. However it can be run at 2500 RPM's. Original cost was $3995.00 It is all brass, stainless steel and aluminum. Ultra virgin olive oil works well for lubrication. Weight is 55 lbs. This steam engine is in almost new condition. Works perfect. 2p5ddv.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1444de0f13f-0xfb-
|
|
|
Liquidating CNG single hose Tulsa dispenser. Totally functional, recently installed public service station, this pump is no longer needed. Any questions call 814-541-7730.
|
|
|
like new. Motor, controller, DC to DC converter and charger and some other stuff, it all came out of a salvaged Nissan Leaf and is sold as is.
|
|
These Blue Prints/ New Technologies show Figures& Plans on How-To build Free Energy Devices/Food/H2O/Space Ships for our future ventures into space etc. I am not the CREATOR of these Documents/Images/Blue Prints. I am Distributing these to those who are willing enough to go to the extra length to create a Eco-Friendly& Star-Venturing Future. All Credit of these files go to Keshe Foundation[Non-Profit Organization] I am not connected/affiliated with the Keshe Foundation just for you're concern. Once you buy I will supply you with the download links to these[Confidential Files] via Email or Sharing Website. The price of these documents are life changing& you must accept any risk doing so using these files. I cannot help you in using these documents and/or supply you with any ... moreof the material provided in these blue prints. I can send you paper documents or a USB with these Blue Prints applied if you do not feel safe with online non-physical purchases. These are just a few pictures of the concept. The Blue Prints I am going to sell to you has all the information needed to build& create this Space Ship. Including new Plasma Reactor Technology for the main core that provides(fuel) as so we know it. This is all I can tell you as of right now but when or whenever you decide for payment you will go on a journey through physics& math to try& piece all these together, but I assure you. after all said& done. You will have a space ship ready for launch. I am currently only accepting CASH Up-Front as Payment. No refunds. We will go through it together when or whenever we meet if you decide to go fourth& do so.
|
|
This is a experimental engine stand from the University of Louisville. Been here last 30 years. NO IT DOES NOT RUN and is just in horrible condition. We repurpose everything here as this ad shows. This is NOT shipping so don't ask. I will defer to you the bidders as to what she is valued at today in 2014. ONLY available for pick up. After the sale I will give you directions, Mon-Fri 9-5 As you can see all items we list have been warehoused here for many years. They will come as I found them. Dusty. If I cleaned them up, you would have to pay me for it, yes its that simple here. If you liked this item. Please add us to your favorite sellers(follow) as we will be listing, and clearing out multiple warehouses here over the next few years. New ID is for organizational purposes. I personally ... morehave been a seller on eBay for the past 9 years, full time, please buy with confidence. Questions are answered within 1 business day, always. Sincerely, Mr.Thornton thorntongifts.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144eb4e483a-0x119-
|
|
|