|
|
Order by: |
Buy It Now
$4.99 Shipping
Condition: New Location: , China
Copper Plated Truss Head Semi-Tubular Rivets Fasteners Oval Head Hollow Rivet. Length: 6/8/10/12/15/18/20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/100mm.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,9/32" L,PK100 1HBP2. APPROVED VENDOR 1HBP2. Semitubular rivets can be set either tight or loose, depending upon application. Each features a hole in the end of the rivet that draws together the materials being joined.
Buy It Now
Free Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,1/8x3/8 In,PK100 PK 6. GRAINGER APPROVED TAC0812-100. Grainger Part #:1HCL3-6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
Buy It Now
Free Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,3/16x1/4 In,PK100 PK 6. GRAINGER APPROVED TSC1208.1-100. Grainger Part #:1HBR5-6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
Buy It Now
$4.00 Shipping
Condition: New Location: Darien, United States
Top Quality Stainless Steel Truss Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.312".
Buy It Now
$4.00 Shipping
Condition: New Location: Darien, United States
Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.147".
Buy It Now
$4.00 Shipping
Condition: New Location: Darien, United States
Top Quality Stainless Steel Truss Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.375".
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,1/4x5/8 In,PK50. GRAINGER APPROVED TSC1620.1-50. Grainger Part #:1HBT8. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia.
0 bids Free Shipping
Condition: New Location: , China
It's very important, we need it. Therefore, make sure you need it before buying the product. You should receive the item within 2-4 weeks.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,1/8x1/4 In,PK100. GRAINGER APPROVED TAC0808-100. Grainger Part #:1HBZ9. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia.
Buy It Now
Free Shipping
Condition: New Location: Ogdensburg, United States
Tubular Rivets Copper Plated 100 packSize:9/16"Head Size: 5/16" (0.79cm)Post Length: 9/16" (1.43cm)Tube Diameter: 1/8" (0.32mm)Made from steel, these plated rivets are designed to last when set properly with the Zelitool Tubular Rivet Peening Tool #8099-00.Note: Rivet post length should be 1/16" to 1/8" longer than material riveted.Quality rivets for professional results. Great for dog collars, leashes, halters, bridles, bracelets, belts and more
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$1.32 Shipping
Condition: New Location: , China
Tubulars Rivets M 0.9 M1.3 M1.5 M1.7 Mix Circuit Board Nails Coppers Hollows Rivets Nut. size：M 0.9 M1.3 M1.5 M1.7. 1000pcs hollows rivets. After this it can solder into place or whatever you might want to.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $2.99 Shipping
Condition: New Location: , China
Item: Aluminum Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6. Head Style:Oval Head. Material: Aluminum.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
If you are not satisfied with our products. We would try our best to help you solve the problem. is what we are striving for.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
Free Shipping
Condition: Used Location: Franktown, United States
LOT OF 150 RIVETS.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
ZORO SELECT. Zoro Select 2Wcl4.0 4" Butt Weld T304 Ss Short Tangent 90 Degree Elbow. Elc Security Products 061H14ppgr Pull Rip Stamped Seals 5-1/2" X 9/64", Green. General Purpose. & Recepticles. Electrical Outlets.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
ZORO SELECT. Eklind 15708 Torx(R) Plain Torx(R) Key, T8 Tip Size, 3 5/32 In Long, 39/64 In. Westward 54Tm86 5/16 In Tip, Socket Bit, Sae 1/2 In Drive. General Purpose. & Recepticles. Electrical Outlets.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
Sizes: M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3 M3.5 M4 M5 M6. Material: Brass.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
Free Shipping
Condition: New Location: Ferndale, United States
AAZF SHANK STYLE TUBULAR. AASK HEAD STYLE FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER).
Buy It Now
$4.20 Shipping
Condition: New Location: Bay City, United States
This is for 160 rivets 1 bag of all 8 of our sizes. these are Aluminum Rivets so they set easy. Big J Toys. 3/16" - 20 pcs. 5/32" - 20 pcs.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Specifications: Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,3/16x5/8 In,PK100 1HEA1. Semitubular rivets can be set either tight or loose, depending upon application. Each features a hole in the end of the rivet that draws together the materials being joined.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$2.50 Shipping
Condition: New Location: , China
Size: M0.9/M1.3/M1.5/M1.7/M2/M2.3/M2.5/M3/M3.5/M4/M5/M6. Model: Eyelet Hollow Tubular Rivets. We will do our best to solve any problems and provide you with the best after-sale service.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids Free Shipping
Condition: New Location: Warren, United States
Buy It Now
$4.20 Shipping
Condition: New Location: Bay City, United States
Semi tubular Rivets for your Tonka or any toy restoration. these are Aluminum Rivets so they set easy. Made In The USA Since 2000.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward.The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
Free Shipping
Condition: New Location: , China
Made of high quality steel with high hardness, durable and practical to use. 1 Coupped Bit For Soild And Tubuler Rivet. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping
Condition: New Location: Onalaska, United States
You are purchasing twenty five of the semi tubular rivets shown in the above picture. These are 1/8" rivets and 1/4" in length. Nickel plated to match most of the toy bumpers I sell in my store and available in many different lengths. I also carry the c-clamp style rivet tool for using these rivets to give your project a professional finished look. International purchasers, to receive combined shipping on multiple items won, please DO NOT pay until you've received an invoice from me to reflect the multiple items. We do our best but do not always catch multiple purchases so paying for items individually may result in you NOT receiving combined shipping. Be sure to check out my Ebay Store as I have over 500 toy parts listings and over 1500 toy decal listings. We are your one stop shop for all your toy restoration needs.
Buy It Now
$2.89 Shipping
Condition: New Location: , China
Thread Specifications: M0.9/M1.3/M1.7/M2/M2.3/M2.5/M3/M3.5/M4/M5/M6. Material: Brass. Length: 2.5mm 3mm 3.5mm 4mm 5mm 6mm 7mm 8mm 10mm.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
Size: M0.9M2.0M2.3M2.5M3. Material: Brass.
Buy It Now
$4.20 Shipping
Condition: New Location: Bay City, United States
Semi tubular Rivets for your Tonka or any toy restoration. these are Aluminum Rivets so they set easy.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
0 bids $3.60 Shipping
Condition: Brand New Location: , China
Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Buy It Now
$2.49 Shipping
Condition: New Location: , China
Size: M0.9/M1.3/M1.5/M1.7/M2/M2.3/M2.5/M3/M3.5/M4/M5/M6. Model: Eyelet Hollow Tubular Rivets. We will do our best to solve any problems and provide you with the best after-sale service.
Buy It Now
$4.20 Shipping
Condition: New Location: Bay City, United States
These are Aluminum Rivets so they set easy. This is for 80 rivets 10 pieces each of all 8 of our sizes. 1/8" - 10 pcs. 5/32" - 10 pcs. 3/16" - 10 pcs.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
Model: Eyelet Hollow Tubular Rivets. Material: Brass. Size: M3/M3.5/M4/M5/M6. We will do our best to solve the problems.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
ZORO SELECT. Zoro Select Vial-40C-10 Vial With Cap,148Ml,Pk10. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Semi-Tubular Rivet,3/32x7/32 In,PK100. GRAINGER APPROVED TBC0607-100. Grainger Part #:1HBU8. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia.
|
|
|
|