|
|
Order by: |
Buy It Now
$2.99 Shipping
Condition: New Location: , China
High quality 304 stainless steel single bright hard wire. Material: 304 stainless steel. Types:Soft Steel Wire/Hard Steel Wire. Smooth surface without burrs.
Buy It Now
Free Shipping
Condition: New Location: Hudson, United States
Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board.
0 bids Free Shipping
Condition: New Location: Fort Lauderdale, United States
Made of carbon steel and galvanized zinc coated with 20 µ m, these pins are durable and can withstand harsh conditions.
Buy It Now
Free Shipping
Condition: New Location: Irvine, United States
2" Tubing Plug Black Round End Cap Bumper Chair Glide Snap In for 2 in OD Pipe. Versatile Use: Use them for waterproof, dustproof, anti-slip, and chemical-resistant protection. Square Plastic Tubing Plugs Tube Cap Multiple Sizes Chair Glide Snap in Fit.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Material： 304 stainless steel. High quality and durable, with 304# stainless steel. 12 different sizes, 120/200 pieces in one box, will fit most of your needs. Easy to install and not easy to fall off when you set well.
Buy It Now
Free Shipping
Condition: New Location: Williamsport, United States
Hook Eye, Jaw Jaw, Eye Eye, Hook Hook, Jaw Eye. Galvanized Drop Forged Turn Buckles.
0 bids Free Shipping
Condition: New Location: Baton Rouge, United States
Made of flexible rubber material, they are of good electric resistance capability. Corrosion resistance, high temperature resistance, durable and tear-resistant.
Buy It Now
Free Shipping
Condition: New Location: Belmar, United States
Buy It Now
Free Shipping
Condition: New Location: Anderson, United States
Uses: Engine Hoses, Auto Parts, Car Parts, Brake Fluid, Coolant Hoses, A/C Lines, Transmission Pipes, Tubes, Holes, Etc. PMI-58 OD 2.555 - 2.69" ID 2.493 - 2.628". PMI-54 OD 2.395 - 2.602" ID 2.333 - 2.54".
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Buckeye, United States
GM 11611199. GM Air Box Screw. Part # BAS01001. Length: 39.8mm.
Buy It Now
Free Shipping
Condition: New Location: Paramount, United States
Carbon steel construction body. Exquisite craft, smooth surface. 10 Pc - 5/32" x 19/64" x 49/64". 10 Pc - 5/32" x 1/4" x 41/64".
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
✅【410 Stainless Steel】The Tek Self Tapping Screws are made of high quality 410 stainless steel, resistant to rust and corrosion. It has higher density, better stability and durability than traditional stainless steel.
Buy It Now
Free Shipping
Condition: New Location: Tustin, United States
Sandbaggy carries a variety of concrete forming supplies. ThisConcrete Turnbuckle Form Aligner is an indispensable asset for any concrete contractor. The Concrete Turnbuckle Form Aligner is a tool for precisely aligning and leveling concrete forms.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Quick Installation: With this anchors, you can easily drive screws into drywall. The focus of these anchors is concentrated and can quickly break through the resistance of the drywall. They are also very strong and will not break after being driven into a screw.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
Hose Clamp. 1PCHose Clamp. Specification s： Material:Carbon Steel. S ize as follow 17.8-21mm (15pcs).
Buy It Now
Free Shipping
Condition: New Location: Leesport, United States
Aluminum Head With Steel Mandrel.
Buy It Now
$15.00 Shipping
Condition: New Location: Salt Lake City, United States
Double Barbs: Enhance gripping power to hold fence securely in place. The galvanized coating protects the staples from rust, while the double barbs ensure a secure hold. This bucket of 1-1/2" staples is ideal for various fence-building projects.
Buy It Now
Free Shipping
Condition: New Location: Mira Loma, United States
High quality: Heavy duty high grade black plastic finishing plug end cap for square tubing in various sizes and quantities. Built with multiple ribs for easy install and secure fit. Type: Tube Inserts.
Buy It Now
$3.00 Shipping
Condition: New Location: , China
Silicone rubber is a soft and elastic material with good sealing type, high temperature resistance, anti-aging, acid and alkali corrosion resistance. Material: Silicone Rubber. Colour: Black. Good Good quality.
Buy It Now
Free Shipping
Condition: New Location: Mira Loma, United States
Heavy duty high grade black plastic finishing plug end cap for square tubing in various sizes and quantities. Built with multiple ribs for easy install and secure fit. • Type: Tube Inserts. • Shape: Square.
Buy It Now
Free Shipping
Condition: New Location: , United States
0 bids Free Shipping
Condition: New Location: , United States
It includes a wrench, 42 sets of 3/8 expansion bolts, and 82 sets of self-tapping screws. It can prevent from shak ing randomly. VEVOR 8 pcs Pergola Bracket Kit Pergola Corner Bracket for 4" x 4" Wood Lumber.
Buy It Now
$5.70 Shipping
Condition: New Location: Queensbury, United States
Buy It Now
Free Shipping
Condition: New Location: Beaumont, United States
You can use them to hide screws and paint them to decorate your furniture. Material: plastic.
Buy It Now
Free Shipping
Condition: New Location: Leesport, United States
Made By GOLIATH INDUSTRIAL TOOL. Great For Use As A Safety Clip On Farm Tractor And Trailer Pins. Drop Forged Yellow Zinc Coated Steel Construction.
Buy It Now
Free Shipping
Condition: New Location: Hillsboro, United States
Screws are preset for easy installation. Preset for easy installation and proper spacing and drainage. Each order contains two (2) boxes totaling enough for 100 sq ft.
Buy It Now
Free Shipping
Condition: New Location: Chicago, United States
20 Pieces of Petal Expansion Nuts (with screws). 【Expansion Design】: The anchors expand on two opposing sides as you tighten the screw, increasing holding power. Material: Steel.
Buy It Now
Free Shipping
Condition: New Location: Orange, United States
Firewall Rubber Hole Plugs. Stem bumpers are typically used as hole plugs or bumpers. Length of Stem. Hole Plugs. These hole plugs are attached without need for screws or other fasteners. Tubing Plugs.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
Perfect for indoor hot water piping, air conditioning piping, petrochemical transportation piping etc. AU--Wire & Cable Connectors. UK--Wire & Cable Connectors. Drill Bit Tools. Size as follow -Convenient to use and carry.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
Total Quantity: 100pcs. -Stepless 1 ear clamp/single ear. -Suitable for demanding applications where lighter, thin-walled hose or tubing. Material: 304 Stainless Steel. -304 stainless steel to resist corrosion.
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
VEVOR 1/4" 100' Proof Coil Chain Zinc Plated Galvanized Towing Guard Rails G30. VEVOR T316 1000ft Stainless Steel Cable 1/8" 1x19 Wire Rope Cable Railing. VEVOR T316 1x19 Stainless Steel Cable 500FT 1/8" Cable Rail Steel Wire Rope.
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
❤High-Quality and Durable: The Quick Link Chain is made of premium 304 stainless steel, ensuring excellent hardness and toughness. It is highly durable, waterproof, rust-proof, and corrosion-proof, making it suitable for both indoor and outdoor activities.
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
Triangle Nail-. Height: 25, 30, 35, 45(in mm) Material and process: iron, electroplated. Color: Silver. Good load-bearing.
Buy It Now
Free Shipping
Condition: New Location: Leesport, United States
Woodruff Keys Roll Pins Snap Rings 50pcs 5/32" X 5/8". 40pcs 1/8" X 5/8". 25pcs 1/8" X 1/2". 25pcs 3/32" X 1/2". 25pcs 3/32" X 3/8".
Buy It Now
$3.00 Shipping
Condition: New Location: , China
Available Size: from 2.5mm to 14mm. Silicone rubber is a soft and elastic material with good sealing type, anti-high and low temperature resistance, anti-aging, acid and alkali corrosion resistance. Material: Silicone Rubber（Food Grade）.
Buy It Now
Free Shipping
Condition: New Location: Anderson, United States
1/4" Cap ID x 1/2" Inside Length. 1/4" Cap ID x 1" Inside Length. 3/8" Cap ID x 1/2" Inside Length. 3/8" Cap ID x 1" Inside Length. 1/2"Cap ID x 1/2" Inside Length. 1/2"Cap ID x 1" Inside Length. 0.562" Cap ID x 1/2" Inside Length.
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
The connector's base snugly fits against the wooden column, providing stable support for the railing without wobbling, ensuring safety protection for the installation site. Made of robust stainless steel for durability, rust resistance, and stability.
Buy It Now
Free Shipping
Condition: New Location: Florence, United States
Multi Purpose Industrial Strength EPDM Rubber T Latch Pull Downs. High Shore Side Seam Construction to absorb and reduce vibration. Weather and Fade Resistant! Keeper Hold Down Bracket Punched and Stamped for Bolting or Welding.
Buy It Now
Free Shipping
Condition: New Location: Elkhart, United States
Diamond Plate Sheet. 025" Aluminum Trim Guard Slim - Various Colors, Sizes. Size: Various. Color: VARIOUS. Finish: Painted or Polished. For multiple orders there may be more than one box.
Buy It Now
$4.50 Shipping
Condition: New Location: Higley, United States
Note: These fittings are designed to nominally fit the actual ID of the tubing size indicated. High quality rigid hose pipe connectors are made from Polyamide 6, 30% Glass Fiber Reinforced. Hose joiners are resistant to fuel, oil and glycol.
Buy It Now
Free Shipping
Condition: New Location: Orange, United States
Snap In Flush Panel Plugs. Flush Head Design Enhance your projects with these versatile Panel Hole Plugs designed for. Hole Plugs. Panel Plugs. Square Plugs. Tubing Plugs. tubing plugs, rubber washers, and more.
Buy It Now
Free Shipping
Condition: New – Open box Location: Saint Petersburg, United States
Bung Wrenches. Tapered rib design for a snug and secure fit. Roof Guards. Prevent scuff marks on floors by using as glides on chair, bar stools, and table legs, bench feet or patio furniture inserts and more.
0 bids Free Shipping
Condition: New Location: Houston, United States
★ Perfect to use to prevent leaks while working with plumbing, hydraulics, air and gas connections. Rubber construction resists oil, gas, water, and solvents. ★ All rubber construction. 25 pc - 7/16".
Buy It Now
$4.00 Shipping
Condition: New Location: Daphne, United States
They slip over the tube end to a depth of 1". Series VSC is available in a wide range of sizes. Material is flexible vinyl. Search this #115590625319 for various sizes flexible vinyl covers 1” - 3”.
Buy It Now
Free Shipping
Condition: New Location: Independence, United States
GENUINE T50. FITS: ARROW T50, T50RED, T50SA, T50SHA.
Buy It Now
Free Shipping
Condition: New Location: Irvine, United States
Material: High-Quality NBR Rubber with Steel Washer. Recessed Rubber Feet Design Key Specifications Made from high-quality NBR rubber for durability. Easy installation with screws, epoxy adhesive, or machine screws, depending on substrate.
Buy It Now
Free Shipping
Condition: New Location: Florence, United States
Multi Purpose Industrial Strength EPDM Rubber T Latch Pull Downs. High Shore Side Seam Construction to absorb and reduce vibration. Weather and Fade Resistant! Keeper Hold Down Bracket Punched and Stamped for Bolting or Welding.
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
Money Piece Nail-. Height: 10, 16, 20, 25, 30 (in mm) Material and process: iron, electroplated.
Buy It Now
Free Shipping
Condition: New Location: , United States
Color is black. 4 Plastic round plugs with flange, fits panel thickness. 03" -. 08".
Buy It Now
Free Shipping
Condition: New Location: Orange, United States
Rubber Feet. Rubber Push-In Feet. Ideal as push-in rubber feet or bumpers. These rubber feet are commonly used as bumpers. Thick Top Pad. The top pad is larger & thicker for more stability. High Temp Silicone Rubber.
Buy It Now
Free Shipping
Condition: New Location: Winder, United States
Quality Screw, Bolt, Nut Size & Thread Checker Gauge. This is a top quality gauge for checking size and thread pitch of screws, bolts & nuts. This gauge is also available in Blue. Your Opinion Your opinion matters!
Buy It Now
Free Shipping
Condition: New Location: Johnson City, United States
Length: 3/8 in. Crown Width: 3/8 in. Crown Type: Flat Crown Product Type: Heavy Duty Staples Gauge: 18 Ga. THESE ARE NOT STAINLESS STEEL STAPES - IF NEEDED, SEARCH FOR ARROW 506SS1 .
0 bids $10.00 Shipping
Condition: Used Location: Lees Summit, United States
These pipe fittings were removed from a playground. Mixture of Hollaender, Cinti and non-marked. All are in good condition and functional but used. Those without are a Kee Klamp designation, but refer to the pictures to make sure it's the style you want.
Buy It Now
Free Shipping
Condition: New Location: , China
Buy It Now
$4.35 Shipping
Condition: New Location: South Boardman, United States
RECTANGLE TUBING PLUG/END CAP 2" X 3". FITS 1.74"-1.83" × 2.73"-2.83" TUBE ID. QUANTITY 2.
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Irvine, United States
Silicon Rubber Drill Hole Plugs with Compression Stem. Stem Bumpers: These plugs can double as stem bumpers, perfect for use as hole plugs or inserted as bumpers to reduce vibration and noise. Easy Installation: Simply push these silicone rubber plugs into holes to cover them neatly, providing a finished look.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
Not easy to deform. Material : Silicone Rubber ( Food Grade ). Water proof and Dust-proof. Long service life. Color : Black. Due to the different monitor and light effects, the actual color of the item might be slightly different from the color showed on the pictures.
|
|
|
Four 73” long pieces#1020 T-Slot 8020(80/20 Inc) Series-10 Aluminum Extrusion This item is used but in very good condition. And were removed from a closed down factory maintenance shop. Made for the aluminum T-Slot extrusion system known as 8020 or 80/20, which is considered an industrial erector set material made by 80/20 Inc. There were many different extruded profiles, brackets, connectors, swivel joints, wheels, and other hardware. I will be listing all the parts I have separately in small lots so you don’t have to purchase what you don’t need. SAVE ON SHIPPING CHARGES: I will combine all you buy into the most cost saving shipments. Buy a lot and save mucho on shipping. After you commit to buy a few items( but before you pay)email me for a better shipping total. You will like my total.if ... moreyou don't? I will cancel the sale for you with no hard feelings) PLEASE DO NOT ASK for an estimate before you commit to buy as I just don't have the time for all the flakes out there. THIS LOT IS FOR: Four 73” long pieces#1020 T-Slot 8020(80/20 Inc) Series-10 Aluminum Extrusion CONDITION: Used. May have small areas of tape. Paint or dust from open shop storage. No holes, deep scratches or bent slots. Perfectly usable. I see no defects that will affect functionality. Each have 4 sets of 2 holes and some side slot distortion.See Photos) USA SHIPPING: This item/lot‘s actual weight is approximately 25 pounds. My shipping charge will be as if 28 Lbs is the packaged weight for this auction item. I will use UPS Ground. For my TOTAL SHIPPING/HANDLING COST to your location please use eBays CALCULATOR near the bottom of this page. For FOREIGN SHIPPING rates check at: http:ircalc.usps.gov/ Take the weight I list for the packaged shipment. Use my Zip(14411) as the"ship from" And add $5 S&H to your choice of service. Freight shipping available for large lots. No COD’s. No charge for LOCAL PICK-UP. Combining purchases is welcome and will ofte
|
|
HEAVY 3 Commercial Grade Stainless Steel Hose Clamps USA Made 7" 4" 2" Used Condition: Used but good working condition. Item Description: This is an auction for a 3 Commercial Grade Stainless Steel Hose Clamps USA Made 7" 4" 2" Used. 7" 2" are Dixon brand 4" is Breeze brand Starting Bid: $5.99 Please check out our other auctions. For more information on our company. Check out our"about me" ebay page. Shipping Information: We combine shipping for multiple purchases. Please wait for our revised ebay invoice with combined shipping. If you bid on multiple items& want a combined shipping estimate before bidding. Please contact us. Item is not available outside the continental U.S. Payment Information: Paypal& all major credit cards ... moreare now the only methods of payment we are allowed to accept on ebay. MO residents will be charged a 6.225% sales tax. Contact Information: Google ATL Welding Supply for more great information on welding& industrial supplies. Where Paypal is accepted. We are currently liquidating a wide variety of assets in the Midwest. If you have any questions about this product. Any of our other auctions, or other great surplus welding supply specials call us at(800) 551-1086 Return Policy: Notified returns received within 30 days of date of purchase will be given a return for the purchase price minus ebay& paypal fees for the following reasons: Manufacturer Defect Inaccurate Item Description Buyer pays all return shipping& is required to contact us before returning anything. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
One 40” long piece#1020 T-Slot 8020(80/20 Inc) Series-10 Aluminum Extrusion This item is used but in very good condition. And were removed from a closed down factory maintenance shop. Made for the aluminum T-Slot extrusion system known as 8020 or 80/20, which is considered an industrial erector set material made by 80/20 Inc. There were many different extruded profiles, brackets, connectors, swivel joints, wheels, and other hardware. I will be listing all the parts I have separately in small lots so you don’t have to purchase what you don’t need. SAVE ON SHIPPING CHARGES: I will combine all you buy into the most cost saving shipments. Buy a lot and save mucho on shipping. After you commit to buy a few items( but before you pay)email me for a better shipping total. You will like my total.if ... moreyou don't? I will cancel the sale for you with no hard feelings) PLEASE DO NOT ASK for an estimate before you commit to buy as I just don't have the time for all the flakes out there. THIS LOT IS FOR: One 40” long piece#1020 T-Slot 8020(80/20 Inc) Series-10 Aluminum Extrusion CONDITION: Used. May have small areas of tape. Paint or dust from open shop storage. No holes, deep scratches or bent slots. Perfectly usable. I see no defects that will affect functionality. Each with 2 holes in mid and 2 on sides. USA SHIPPING: This item/lot‘s actual weight is approximately 3 pounds. My shipping charge will be as if 4 Lbs is the packaged weight for this auction item. I will use UPS Ground. For my TOTAL SHIPPING/HANDLING COST to your location please use eBays CALCULATOR near the bottom of this page. For FOREIGN SHIPPING rates check at: http:ircalc.usps.gov/ Take the weight I list for the packaged shipment. Use my Zip(14411) as the"ship from" And add $5 S&H to your choice of service. Freight shipping available for large lots. No COD’s. No charge for LOCAL PICK-UP. Combining purchases is welcome and will often save you quite a bit on shipping c
|
|
|
For Sale: Two cabinet lift off door hinges. Hinges were removed from an automation cabinet made from 80/20 metric 40 series T-Slots with a critical slot opening of 10 mm.
|
|
One 25” long piece#1530 T-Slot 8020(80/20 Inc) Series-15 Aluminum Extrusion This item is used but in very good condition. And were removed from a closed down factory maintenance shop. Made for the aluminum T-Slot extrusion system known as 8020 or 80/20, which is considered an industrial erector set material made by 80/20 Inc. There were many different extruded profiles, brackets, connectors, swivel joints, wheels, and other hardware. I will be listing all the parts I have separately in small lots so you don’t have to purchase what you don’t need. SAVE ON SHIPPING CHARGES: I will combine all you buy into the most cost saving shipments. Buy a lot and save mucho on shipping. After you commit to buy a few items( but before you pay)email me for a better shipping total. You will like my total.if ... moreyou don't? I will cancel the sale for you with no hard feelings) PLEASE DO NOT ASK for an estimate before you commit to buy as I just don't have the time for all the flakes out there. THIS LOT IS FOR: One 25” long piece#1530 T-Slot 8020(80/20 Inc) Series-15 Aluminum Extrusion CONDITION: Used. May have small areas of tape. Paint or dust from open shop storage. No holes, deep scratches or bent slots. Perfectly usable. I see no defects that will affect functionality. Each has 2 holes in mid section of one slot.See Photos) USA SHIPPING: This item/lot‘s actual weight is approximately 5 pounds. My shipping charge will be as if 6 Lbs is the packaged weight for this auction item. I will use UPS Ground. For my TOTAL SHIPPING/HANDLING COST to your location please use eBays CALCULATOR near the bottom of this page. For FOREIGN SHIPPING rates check at: http:ircalc.usps.gov/ Take the weight I list for the packaged shipment. Use my Zip(14411) as the"ship from" And add $5 S&H to your choice of service. Freight shipping available for large lots. No COD’s. No charge for LOCAL PICK-UP. Combining purchases is welcome and will often save you quite a b
|
|
2 NEW(2436) Mesh Panel Retainers for 8020(80/20 Inc) Removed from a closed down factory maintenance shop. Most of these items are NEW. NEVER USED. Made for the aluminum T-Slot extrusion system known as 8020 or 80/20, which is considered an industrial erector set material made by 80/20 Inc. There were many different extruded profiles, brackets, connectors, swivel joints, wheels, and other hardware. I will be listing all the parts I have separately in small lots so you don’t have to purchase what you don’t need. SAVE ON SHIPPING CHARGES: I will combine all you buy into the most cost saving shipments. THIS LOT IS FOR: 2 NEW(2436) Mesh Panel Retainers for 8020(80/20 Inc) for aluminum extrusions(see photo or 80/20 website for specs. CONDITION: New. Never used. 2006 Price from 80/20 Inc website: ... more$ 5 each Can be shipped Priority Mail with tracking anywhere in U.S. for $4.50. Optional: insurance($1.35) NOTE: Shipping price quoted is for mailing item/s in an envelope(Flat Rate Envelope) I will pad it the best I can. But am limited by the size of the envelope Use the CALCULATOR if you want this boxed(shipping cost will be higher) USA SHIPPING: This item/lot‘s actual weight is approximately.5 pounds. If you don’t want it sent in the Flat-Rate Envelope the shipping charge for mailing in a box with more insulation. And all foreign shipments will be as if 1 Lbs is the packaged weight for this auction item. Combining purchases is welcome and will often save you quite a bit on shipping costs. Click on the link“View seller's other items” at the top of this page. RETURNS: Satisfaction guaranteed or your money back NO“restocking fee” NOT SOLD"AS-IS" I have attempted to honestly represent this item to the best of my knowledge. And photograph it as clearly as possible. But, because I do make mistakes(Yes, I am human! buyer may return within one week of receipt, for any reason, and receive full reimbursement of the high bid price(with NO"restocking" fee) NO QUESTIONS ASKED! I will even reimburse shi
|
|
|
4 swivel caster wheels. Very good condition! All 4 wheels swivel. The wheel diameter is about 3" and the height is 4" They seem like very nice sturdy casters! They have seen very little wear! Check out my other items! I'm more than happy to combine shipping! If you make multiple purchases please contact me BEFORE paying. I can almost always beat the automated shipping discount price! 30 day no hassle returns accepted! I stand behind my sales so you can bid worry free! If there is a problem of any kind. Please contact me prior to leaving feedback. I'm sure we can work it out! My customers satisfaction and my standing with ebay are extremely important to me! I'm not happy until you are!
|
|
|
Here is a large bolt with nut that measures 5 1/4in long x 1 1/8in around. Nut measures 1 7/8in x 1 1/16in. Eyelet measures 1 1/2in x 1/2in. With a 1/2in hole. Regular USA shipping will include tracking number. Any place other than lower 48 states, contact me for shipping rate. Thanks for looking, Bob.
|
|
|
VACO RETAINING RINGS AND PLIERS- SNAP RING KIT. MASTER SERVICE KIT# 1550. DIAMETERS ARE 3/8. 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 15/16, 1 INCH, 1INCH, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 11/16, 3/4. 25/32. 7/8. I KNOW SOME DIAMETERS HAVE BEEN REPEATED. IF YOU LOOK ON THE CHART SOME ARE OPEN AND SOME ARE CLOSED. REFER TO PICUTRE IF NEEDED. COMES WITH RINGS AND PLIERS AND HAS ONLY A FEW MISSING. NICE INDUSTRIAL CASE INCLUDED! THANKS FOR LOOKING. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e4a3f4a50-0xfe-
|
|
|
Track is 6 ft long x 1 3/16 inch wide. Wall mtg brackets@ 13 1/2" on center.
|
|
DESCRIPTION: LEVELING FOOT FEET PAD 1/2 1-1/2 OD 2" THREAD LENGTH 2-3/4 OVER ALL LENGTH INVENTORY#1023 USED; MAY SHOW SIGNS OF USE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP TO SAVE YOU EVEN MORE MONEY. TERMS and CONDITIONS We try to describe every item the best of our ability. Although we do have experience in the tooling industry we don't know everything. We are always happy to answer any questions. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1 business day. Shipping charges are the responsibility of the buyer. 3: We do offer a money back refund if ... morethe item is not as described. The item must be received back in its original condition and we must be notified through eBay messages within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. 4: When we say it is NEW; It will be never used or old stock. 5 Concerning calibration of items; no items are calibrated unless otherwise noted. 6: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
3M Dual Lock Reclosable Fastener System MP-3551/52(1 in x 4.7 yd) Black Color· Stem Type 400/170· 1 inch wide· 2 Rolls(1 inch by 4.7 yards) This is a partial box: The 2 Rolls have(1 inch by 166 1/2" instead of 180" Or 4.7 yards instead of 4.9 yards) Adheres well to many surfaces including: Bare Metals· Painted Metals· Glass· Fiberglass Painted Wood and many plastics including: ABS· Acrylic· Polycarbonate Polystyrene· Rigid Vinyl Not recommended for use on powder paint. Polyethylene or polypropylene.
|
|
|
Tsubaki. 2080SS. Conveyor Roller Chain New. Without box. Warranty- 3 months. Not tested. Price for 3m' I sent items to the buyer next workday after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL–express write me and I will answer how much it would cost you. I have more items of the same kind. Write me how much and how quickly you need them. I will display the goods on Ebay.com as"Buy it now"
|
|
|
Description VINTAGE MALINS MUSIC WIRE LOT#ND-1. THE BOX HAS PAPER WEAR HAS WRITING ON THE CARDBOARD. HAS TEARS. I DO NOT KNOW IF ANY OF THE WIRE WAS USED. LOOKS LIKE A LOT IS LEFT. PLEASE SEE PHOTOS FOR WHAT YOU WILL BE RECEIVING. WE COMBINE SHIPPING ON ALL OF OUR ITEMS. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e818952ea-0x105-
|
|
|
Here is a real good used MIP-1200 Steel Strapping Tensioner for Steel Strapping. Realize the saving by buying my tensioner over other listing up to 6 times my price. I always pack very good for safe delivery. Remember my price includes FREE SHIPPING to adjoining 48 States. For additional information be sure to call Ken Eppersopn at 573-864-2547.
|
|
|
Total of 5- 5/32" Wingnut Cleco Fasteners with 0- 1/2" Grip. Genuine Kwik-Lok KWN-FW- 5/32 These fasteners are in great working condition. Clecos pictured are the ones you will receive. Thanks for looking. Powered by
|
|
|
Total of 10- 5/32" Wingnut Cleco Fasteners with 0- 1/2" Grip. Genuine Kwik-Lok KWN-FW- 5/32 These fasteners are in great working condition. Clecos pictured are the ones you will receive. Thanks for looking. Powered by
|
|
|
Total of 20- 5/32" Wingnut Cleco Fasteners with 0- 1/2" Grip. Genuine Kwik-Lok KWN-FW- 5/32 These fasteners are in great working condition. Clecos pictured are the ones you will receive. Thanks for looking. Powered by
|
|
MEADOWTOWN AUCTIONS PRESENTS: Vintage 1967 HOLO-KROME SOCKET SCREW SELECTOR CARD CHART#1063 Cool Chart from 1967 to figure out which Screws go to what. In very nice condition Thank you for choosing Meadowtown-purveyor of vintage collectibles. Ephemera, with a few odds and ends. Stop by my store to see what else you can dig up. Shipping-If you purchase your item Sunday through Thursday. I ship next day. Friday and Saturday purchases will not be shipped until Monday. If there are any issues with shipping, let me know so I can help you. Returns-I can and will do everything possible to make sure you are happy with your order. I try to describe the item as best I can. But due to the vintage nature, I may not get everything. I want to emphasize that I never claim to sell mint or perfect items. I ... morewant all my buyers to be satisfied, so if you are unsure, please ask questions prior to bidding. If you are unsatisfied. Or if you have any problems, I will work until I resolve the issue! Please give me the chance to resolve the issue before leaving negative feedback. Thanks!
|
|
Questions? Call us: 1-877-328-9236. Heavy Duty 3/4"10 x 4" Stud Leveling Foot W/ Jam Nut. Manufacturer: Unknown Model: Unknown Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Unknown Condition: Used. Comes in non-original packaging. Item has minor dings from previous use. Notes: This item has not been tested. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Heavy Duty 3/4"10 x 4" Stud Leveling Foot W/ Jam Nut, Specifications: Manufacturer: Unknow, Base Diameter: 4" Total Length: 5 3/8" Thread Length: 4, Threads per Inch: 10, Material: Steel, SKU: L32M015 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. ... more877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to be as described. The
|
|
Questions? Call us: 1-877-328-9236. Tochigiya 13/16"10 x 7 7/8" Stud Leveling Foot W/Pad. Manufacturer: Tochigiya Model: 13/16" 10 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Tochigiya Condition: Used. Comes in non-original packaging. Item has minor dings and scratches from previous use. Notes: This item has not been tested. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Tochigiya 13/16" 10 x 7 7/8" Stud Leveling Foot, Specifications: Manufacturer: Tochigiya, Model: 13/16" 10, Base Diameter: 2 1/4" Total Length: 9" Thread Length: 7 7/8" Threads per Inch: 10, Material: Steel, SKU: L32M023 For questions regarding this item. Please reference the SKU ... moreto help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Wa
|
|
Box of 48 18-8SS Dowel Pins 1/8 x 1-1/8 From our inventory. We are selling a Box of 48 18-8SS Dowel Pins 1/8 x 1-1/8. Specifications: Model# Box of 48 18-8SS Dowel Pins 1/8 x 1-1/8 ST45-4-G 2 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 2 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit ... moreCard through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure safe
|
|
One Lot(20pcs) of 80/20 Inc 15 Series Black Zinc 5/16-18 x 3/4" SHCS w/Economy T-Nut& Washer. Combo Part#3468, Used. This lot contains the following pieces: 20 pieces of 5/16-18 x 3/4" SHCS 20 pieces of 5/16-18 Economy T-Nut, 20 pieces of 5/16 Washer, The above quantities will make 20 combo parts of#3468. Mixture of new and used pieces. Please note that due to sales volume we cannot recalculate and refund S&H if you pay for items separately. Questions on how to buy? Please click BUYING Condition: Used Price Per: Lot Item/Lot Weight: 1 pound For detailed information on this item or other 80/20 Inc Extrusions and Accessories. Simply click on the catalog photo link below: SHIPPING& HANDLING WE DO COMBINE NEW TO EBAY? Click BUYING for detailed checkout/ buying assistance. ... morePURCHASING MORE THAN ONE ITEM? Please wait until you have selected your last item to Request Total from Seller or make payment. When purchasing multiple items we suggest you use Request Total from Seller to insure the best S&H price however you are free to send payment if the indicated S&H price is agreeable. Items ship within 3 business days from Columbia City. IN 46725. Click for more important information about the shipping of your item. PAYMENT TERMS Payment via Paypal. Major credit cards accepted. For info on paying via credit card click Please note our hours are M-F 8AM- 5PM. Evening and weekend orders are processed in the morning of the next Business day. Check out our other items and be sure to add us to your favorites list! ABOUT 80/20 SURPLUS 80/20 Surplus offers overstock. Returned goods, and lightly damaged items that are surplus to the needs of 80/20 Inc, a leader in T-slot aluminum framing products. These items may not meet the rigid appearance standards of 80/20 Inc. Surplus items may have light surface scratches or discoloration but are FULLY FUNCTIONAL unless otherwise noted in the body of the listing. Please visit our page for more info on 80/20 Surplus and 80/20 Inc. Powered by The free listing tool.
|
|
|
This lot is 20 pcs 3/8 shaft collar. Used, 7/64 socket head screws
|
|
|
1-888-9WEC2IT(993-2248) Problem? Lot of 78 M28-22 TA FPL-PX Compression Coupling AC Air Pipe Connectors. Item Description. Manufacturer Unknown, Model Number M28-22 TA FPL-PX, Category Industrial Manufacturing, Cosmetic Wear Items are in good cosmetic shape. Functional Condition Fully functional, Items Included In Listing Approximately 78 units. RNF113. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
|
|
|
Nice big stainless hinges. Four off set hinges(3/4) Two latch handles. No latch catches. Item in photos are what you will receive. Heavy item. Posted with
|
|
|
hook check mark hook with eye 9"long rod id 1/2" round not really sure what this is for we will combine shipping when buying more then one item
|
|
One Lot(30pcs) of 80/20 Inc 15 Series 1.5" x 1.5" End Cap. Part#2030, Used. This end cap is used to cover the end of the 1515 or 1515 Lite(1.5" x 1.5" T-slot aluminum extrusion. This lot contains 30 pieces of end caps with NO pushins. Used and a little dirty but fully functional. Please note that due to sales volume we cannot recalculate and refund S&H if you pay for items separately. Questions on how to buy? Please click BUYING Condition: Used. Price Per: Lot. Item/Lot Weight: 4 pounds. For detailed information on this item or other 80/20 Inc Extrusions and Accessories. Simply click on the catalog photo link below: SHIPPING& HANDLING WE DO COMBINE NEW TO EBAY? Click BUYING for detailed checkout/ buying assistance. PURCHASING MORE THAN ONE ITEM? Please wait until ... moreyou have selected your last item to Request Total from Seller or make payment. When purchasing multiple items we suggest you use Request Total from Seller to insure the best S&H price however you are free to send payment if the indicated S&H price is agreeable. Items ship within 3 business days from Columbia City. IN 46725. Click for more important information about the shipping of your item. PAYMENT TERMS Payment via Paypal. Major credit cards accepted. For info on paying via credit card click Please note our hours are M-F 8AM- 5PM. Evening and weekend orders are processed in the morning of the next Business day. Check out our other items and be sure to add us to your favorites list! ABOUT 80/20 SURPLUS 80/20 Surplus offers overstock. Returned goods, and lightly damaged items that are surplus to the needs of 80/20 Inc, a leader in T-slot aluminum framing products. These items may not meet the rigid appearance standards of 80/20 Inc. Surplus items may have light surface scratches or discoloration but are FULLY FUNCTIONAL unless otherwise noted in the body of the listing. Please visit our page for more info on 80/20 Surplus and 80/20 Inc. Powered by The free listing tool. List your items fast and easy and manage your ac
|
|
|
7) 3/8" Turnbuckle. 4) 3/8" U-Bolts(28) 1/4" U-Bolts, 7) Cable Protectors, 7) 3/8" hooks, 7) 3/8" eye/hole Posted with
|
|
Please Read Complete Listing and ask questions before bidding. Thank You Keith Morris 248-459-0507 Email keith@usavequip.com You are bidding on ONE take the one you want The y both power up and run good I gu ess I do not know a lot about them I plugged them in and turned them on that is what I know about them I am listing them at $400 each or B u y now $ 7 00 for both if you are local and paying with Cash I am all ears if you want just one make a offer well make offer on both they just need a new home Shipping $1 50 to $400 the closer you are to Michigan the cheaper if you need a quote send a zip and weather you need a lift gate at delivery and a business or going to your home Wanted 12. 20, 30, 40, 60, 80, 140qt Hobart mixers& HCM's, VCM's pices and parts running or not Estimated ... moreShipping $? We will ship anywhere In the USA Free pick up at our shop in Holly Mi 48442 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We at U-SAV Equipment. LLC: BUY. Sell or Trade all kinds of Mixers, attachments, and other used Hobart Equipment. Repair most makes of mixers and equipment. Are also a Univex Dealer. Carrying a full line Univex equipment& parts. Shipping We do not make money off Shipping we charge what UPS charges We just put in the weight and size when listing a item eBay does all the figuring some time they are off and you will get a refund Look in our store for more mixer accessories. Paddles and dough hooks. We have almost any paddle you want from 12 qt. up to 140 qt. Please call if you do not see what you are looking for listed. U-SAV is a full service restaurant supply company carrying a full line of small wares. Most all of our auctions are no reserve Bid to Buy. We reserve the right to end auction early. Any and all comments you have are welcome. We are here to serve you the customer! Your responses help us to serve you better. Sincerely, Keith If you need more info Call Keith at 248-459-0507 or email: keith@usavequip.com Want something in the Michigan area from a person
|
|
These came from electric switch gear(inside) These are in good reusable condition. Not in new condition. steel- you can buff them to the desired shine. Measurements are from me. And are to the best of my ability. If you need perfect factory precise measurements then please look for new ones. Thanks Comes as shown(THIS SET NOT BEAD BLASTED FOR THE FLAT LOOK) Measurements are- 1/2 Inch hole(13.30mm- 5240in) OD- 1" 2510mm- 9880in) Thick Spacer(10.70mm- 4215in) Heavy 3/8(OVER) Thin Spacer( 8.54mm- 3365in) 5/16 Please compare to chart below- Pl ease ask any questions before you BIDNBUY. Thank you Millimeters Inches Inches Centimeters Meters Decimal Fractional 0.3969 0.0156 1/64 0.04 0.0004 0.7925 0.0312 1/32 0.08 0.0008 1.0000 0.0394 0.10 0.0010 1.5875 0.0625 1/16 0.16 0.0016 2.0000 0.0788 ... more0.20 0.0020 3.1750 0.1251 1/8 0.32 0.0032 3.0000 0.1182 0.30 0.0030 4.0000 0.1576 0.40 0.0040 5.0000 0.1970 0.50 0.0050 6.3500 0.2502 1/4 0.64 0.0064 7.0000 0.2758 0.70 0.0070 8.0000 0.3152 0.80 0.0080 9.0000 0.3546 0.90 0.0090 9.5250 0.3753 3/8 0.95 0.0095 10.0000 0.3940 1.00 0.0100 11.0000 0.4334 1.10 0.0110 12.0000 0.4728 1.20 0.0120 12.7000 0.5004 1/2 1.27 0.0127 13.0000 0.5122 1.30 0.0130 14.0000 0.5516 1.40 0.0140 15.0000 0.5910 1.50 0.0150 15.8750 0.6255 5/8 1.59 0.0159 16.0000 0.6304 1.60 0.0160 17.0000 0.6698 1.70 0.0170 18.0000 0.7092 1.80 0.0180 19.0500 0.7506 3/4 1.91 0.0191 20.0000 0.7880 2.00 0.0200 22.2250 0.8757 7/8 2.22 0.0222 25.4000 1.0000 1 inch 2.54 0.0254 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13eb6057e19-0x108-
|
|
The overall length of the pin is 1 3/8" Below the head of the pin it is 7/8" x 1/4" Diameter The wire rope/ cable is 10" x 1/16" Diameter(approximately) The bracket is attached to the area area of the pin. It 3/8" away from the straight part of the pin. The bracket is 3/4" wide x 1" with a bend in it near the bottom. It looks like the pin is put into hole and kept in place by the bracket. The bracket and cable are made of steel. The pin is made of stainless steel We are not sure if it is used or not. It is in excellent condition. Please remember that the shipping cost to ship this item to a location within the United States is included in the selling price! No one can truly ship anything for free. The only difference between listings with free shipping ... morecompared to listings without free shipping is that the customer knows exactly how much the item will cost when purchasing it! We purchased a quantity of electron tubes at a yard sale recently. We had them checked out and put them in 4 catagories. Unused Used. But still working Used and not working. Unable to check. Our tester did not have the proper equipment to test the tube. Some of the tubes were in boxes that were not the correct box. We plan to ship the tubes in the small flat rate priority mail boxes. There should be less chance of breakage that way! Please be aware that our shipping and handling fees reflect not only the cost of shipping your purchase to you. But also the cost of packaging materials. Our time and most importantly, our time hand delivering each package to the US Post Office. There is NO mai
|
|
|
This is a plastic printer gear lot. The gears are mechanically in good shape but are coated in a grease residue that will need to be soaked off. Various sizes. These would be good for projects including possible upcycling or spare parts to have on hand. Posted with
|
|
|
42" TABLE CROME WAYS THIS MACHINE IS IN EXCELLENT SHAPE THE KNEE LOOKS NEW LOW MILAGE ON THIS MACHINE LATE MODELCAME OUT OF A TRADE SCHOOL THEY NEVER USED IT. YOU DONT SEE THEM WITH A KNEE AS NICE AS THIS NO NOISE ON THE HEAD BEARINGS ARE EXCELLENT WELL TAKEN CARE OF COMES WITH R8 COLLET SET ENDMILL ASSORTMENT AND KNEE HANDLE AND QUILL HANDLE CALL FOR A SHIPPING PRICE.
|
|
|
SQUARE D CLOSING COILSAJ 51020-056-85 USED BUT GOOD FREE SHIPPING! ALL ITEMS GUARANTEED. NO QUESTIONS ASKED RETURN POLICY. FREE U.S. SHIPPING. NOTE: IF WE ACCEPT AN OFFER LESS THEN THE ORIGINAL ASKING PRICE. WE WILL SHIP THE CHEAPEST WAY. 9 TIMES OUT OF 10, IF YOU PAY BEFORE 3:30 PM EST. MON-FRI, WE WILL SHIP THAT DAY.WE HOPE THAT YOU ARE HAPPY WITH YOUR PURCHASE, BUT IF YOU ARE NOT, EMAIL US AND WE WILL DO WHATEVER WE CAN TO MAKE IT RIGHT.IF YOU ARE STILL NOT HAPPY, SEND IT BACK. BUT PLEASE GIVE US THE CHANCE TO SATISFY YOU!RETURN POLICY.FIRST EMAIL THAT YOU ARE MAKING A RETURN.SECOND IT MUST BE BACK IN THE MAIL WITHIN 14 DAYS FROM THE TIME YOU RECEIVE THE ITEM.ITEM MUST BE IN THE EXACT SAME CONDITION AS WHEN WE SHIPPED IT.
|
|
|
19" WIDE 29" DEEP 52 TALL NICE SHAPE WE CAN COMBINE SHIPPING CALL FOR A SHIPPING PRICE.
|
|
Large Heavy Duty Metal Double Hook Turnbuckle Industrial Age Rustic Decor Approx. 29" closed& 37" open There is a 3 above a 4 on one end(see pic#3) The threads are ¾" and it weighs about 8 lbs. This is not my expertise so please ask any and all questions you may have before bidding. I ACCEPT PAYPAL ONLY. Buyer is responsible for all shipping& handling fees Insurance is included in most cases. Payment is expected within 2 days of auction ending. Unpaid item cases are filed automatically by eBay against buyers that do not pay within 2 day so I can get my eBay fees credited back to me. We Ship USPS& UPS. Combined shipping is available but I must be contacted before payment is made so I can send you an invoice with new shipping charges. You must have a physical ... moreaddress to ship UPS. I only ship to Paypal verified addresses so make sure the address you intend the item to be shipped to is listed with Paypal before bidding because this is where it will be shipped. If it goes to a wrong address due to address not being updated on Paypal then. Shipping fees to resend to new address will be charged. Shipping in the US ONLY. Please e-mail with any questions you may have before bidding. Please Note: Once you bid it is considered a binding contract. Asking questions that should have been asked before bidding will not constitute reason for a refund if one is offered on the item. We would be happy to answer any question you may have to the best of our ability and would like the chance to resolve any issue you may have before you leave negative feedback or file a case. We will be happy to do the same for you. THANK YOU. GOOD LUCK AND HAPPY BIDDING.
|
|
|
8020-2080) 80/20 Adjustable Hinge T Slot Aluminum 15 S 2080(USED) Includes: 1 Piece) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
8020-3286) 15 Series 1/4-20 Slide In T Nut CENTERED(10 PCS) Includes: 10 Piece) Powered by The free listing tool. List your items fast and easy and manage your active items. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ed938a25f-0xfe-
|
|
|
8020-3778) 15 Series 5/16-18 T Nut PN 3376(20 PCS) Includes: 20 Piece) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Don't like our price? Make us an offer! Item Description: FLEXCO ALLIGATOR Flexible Steel Lacing. Everything pictured included. One set of lacing has been used. But all else there. As pictured. About Free Shipping: Free shipping is only for domestic shipping to the lower 48 states to a physical(ie. non PO Box) address deliverable by Fedex/ UPS ground. If you only have a PO Box or live in Alaska. Hawaii, or other, please contact us regarding the difference in the shipping cost. Please let us know if you have any questions. About our Feedback: Please do leave us good feedback on all our categories. Unfortunately. Ebay has made it more difficult for smaller sellers and so anything less than perfect actually counts against a seller. Please let us know if there is anything we can do to accomodate ... moreso you can provide us with top ratings on all our categories! If there are any problems or questions, please do not hesitate to ask! Powered by
|
|
|
Caterpillar CAT D Ring Kit Caterpillar D-Ring Kit: This item is preowned& does show signs of wear from normal outside/garage use. All rings are original from CAT, since this item was used please know that it does not have the original amount of rings Also exterior is not very pretty Please see all pictures for a better look at condition Please see all pictures& ask all questions before bidding or buying No refunds. So please, communication is vital: Happy bidding/shopping! Posted with
|
|
|
16 inch forged steel turnbuckle with two eyes With 1 3/8" holes and 5/8" threads. Posted with
|
|
|
This is misc vehicle equipment hardware like roll pins.E clips, throttle llinkage, o rings, assorted grease fittings, star lock washers, and self taping drain plugs. My husband is now retired.
|
|
|
8020-4305)15 Series 80/20® 4 Hole Joining Strip 15 s PN 4305 INCLUDES: 1 PIECE Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Here is a pair of brass snap hooks. Like new. 360 degree rotation, strong spring action, about 3 inches long. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13ee51fb6de-0xfc-
|
|
|
8020-4481) 15 SeriesAluminum 5 Hole"L" Joining Plate PN 4481 PN 4481 INCLUDES: 1 PIECE Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
8020-4480) T Aluminum Joining Plate PN 4480 INCLUDES: 1 PIECE Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
You are bidding on this lot of vibration dampers. They are used but look in good shape. See picture. Winner to pay calculated shipping to the US with payment due within 7 days. Feel free to use PayPal. You can use your credit card through PayPal.
|
|
|
This auction is for 20 hitch pin cotter pins. Measure about 3/4" Several shapes. Leftovers from button cards. PLEASE ASK QUESTIONS BEFORE BIDDING. I ACCEPT PAY PAL. PAYMENT IS DUE WITHIN 3 DAYS OF AUCTION END. I WILL GLADLY COMBINE SHIPPING TO SAVE YOU MONEY ON POSTAGE. PLEASE LET ME KNOW IF YOU ARE BIDDING ON MULTIPLE ITEMS. BEFORE PAYING. PLEASE REQUEST AN INVOICE. I WILL PACKAGE THINGS UP. GET THE POSTAGE QUOTE, AND THEN SEND YOU AN INVOICE. ENJOY! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13eea993c8a-0x105-
|
|
|
You get it all ~ There is a Wesco Products Company sliding caliper that says on back it is a"Universal Joint Identifier" ~ 2 plastic gages with Bowman advertising that says"Bolt& Nut Gage" ~ plus a U.S. Steel supply advertising piece that is Lentiqular on the reverse side. A Fraction- Decimal Equivalent Chart, and 6" inch rule ~ All Plastics, All advertising pieces, probably giveaways or company promotional items, All used. ~ Honest auctions- prompt shipping- Thank You
|
|
FOR SALE ARE TWO CONTANERS WITH SLIMSERT INSTALLATION TOOLS FOR SIZE 37. THE BOXES HAVE THE NUMBER SRPBT37 ON THEM. THEY ARE FROM AN AERSPACE COMPANY. THE BOXES HAVE WHAT IS SHOWN IN THE PICTURES. THERE ARE DOUBLES. TRIPLES, ETC OF SOME AND SINGLES OF SOME. THIS IS NOT 2 COMPLETE SETS. BUT A COMPILATION OF THE 37 SIZE TOOLS INTO TWO CASES THESE BOXES CONTAIN THE FOLLOWING PART NUMBERS. SRPBT37. SRWPBT37,BROACH TOOLS(AND EXTRA BROACH CUTTER INSERTS) SRW37T BOTTOM TAP.SRW37T TAPER TAP SRW37D STEP DRILL SRW37SA SWAGE TOOL SLIMSERTS ARE EXCELLENT THREADED INSERTS USED IN AEROSPACE AND OTHER APPLICATIONS. TYPICAL PROCEDURE IS 1) DRILL USING STEP DRILL 2) BROACH USING BROACH TOOL 3) TAP HOLE USING TAP 4) WRENCH IN SLIMSERT 5) SWAGE USING SWAGE TOOL TO LOCK IN PLACE THANK YOU I HAVE OTHER SIZES FOR ... moreSALE ON EBAY. I DO COMBINE SHIPPING IF PURCHASED AT THE SAME TIME. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13eea993d2b-0xfb-
|
|
FOR SALE ARE THREE CONTANERS WITH SLIMSERT INSTALLATION TOOLS FOR SIZE 31. THE BOXES HAVE THE NUMBER SRWPBT31 ON THEM. THEY ARE FROM AN AERSPACE COMPANY. THE BOXES HAVE WHAT IS SHOWN IN THE PICTURES. THERE ARE DOUBLES. TRIPLES, ETC OF SOME AND SINGLES OF SOME. THIS IS NOT 3 COMPLETE SETS. BUT A COMPILATION OF THE 31 SIZE TOOLS INTO THREE CASES THESE BOXES CONTAIN THE FOLLOWING PART NUMBERS. SRPBT31. SRWPBT31,BROACH TOOLS(AND EXTRA BROACH CUTTER INSERTS) SRW31T BOTTOM TAP.SRW31T TAPER TAP SRW31D STEP DRILL SRW31SA SWAGE TOOL SLIMSERTS ARE EXCELLENT THREADED INSERTS USED IN AEROSPACE AND OTHER APPLICATIONS. TYPICAL PROCEDURE IS 1) DRILL USING STEP DRILL 2) BROACH USING BROACH TOOL 3) TAP HOLE USING TAP 4) WRENCH IN SLIMSERT 5) SWAGE USING SWAGE TOOL TO LOCK IN PLACE THANK YOU I HAVE OTHER SIZES ... moreFOR SALE ON EBAY. I DO COMBINE SHIPPING IF PURCHASED AT THE SAME TIME.
|
|
|
Total of 5- 1/8" Wedgelock Cylindrical Cleco Fasteners with 1/2" to 1 1/2" Grip. CBXEL-BF-1/8 These Fasteners are used. But have been hand tested and are in Good working condition. Clecos pictured are the ones you will recieve. I combine shipping when possible, Thanks for looking. Powered by
|
|
Heavy Duty Metal Hardware STORAGE BIN 35" x 21" x 12" Local Pick Up DELAWARE IF YOU SEE AN ITEM ON OUR LIST AND IT IS NOT A BUY IT NOW. DONT HESITATE IN CONTACTING US, IN MOST CIRCUMSTANCES IF YOU OFFER US A FAIR PRICE WE WILL SELL IT. UP FOR BID IS- THIS HEAVY DUTY. HEAVY GAUGE METAL OR STEEL, NUT AND BOLT OR HARDWARE STORAGE BIN. MEASURES 35 1/4" LONG x 21 1/4" TALL x 11 7/8" WIDE.IT HAS HOLES ON THE TOP/BACK AND BOTTOM. DEPENDING ON HOW YOU WANT TO MOUNT IT.OR CAN JUST SIT IT ON WORK BENCH.YOU CAN SEE IN PICTURES THE FRONT HAS A LIP TO KEEP ANYTHING FROM FALLING OUT. SHIPPING WOULD BE COSTLY BECAUSE OF WEIGHT SO I AM ONLY GOING TO OFFER A LOCAL PICK-UP ON THIS.I WILL SHIP IF YOU ARE WILLING TO PAY.ROUGHLY 40 POUNDS. AND DIMENSIONS ARE GIVEN ABOVE. MANY MORE ... moreUNIQUE.FRESH ESTATE ITEMS COMING. IF YOU SEE AN ITEM ON OUR LIST AND IT IS NOT A BUY IT NOW OR BEST OFFER. DONT HESITATE IN GIVING US A SHOUT. IN A LOT OF CASES WE WILL CHANGE IT TO SELL SELL SELL IS OUR MOTTO. THEIR WILL BE EXCEPTIONS TO THIS BUT YOU WILL NOT HURT MY FEELINGS BY JUST MAKING AN OFFER. BY MAKING WE ONLY ACCEPT PAYPAL PAYMENTS WITH A CONFIRMED ADRES WE WILL NOT SHIP TO A FRIEND OR A COUSIN. ONLY THE PERSON WHOS ADRESS IS CONNECTED WITH THE PAYPAL ACCOUNT. DIRECTLY AFTER THE CLOSE OF THE AUCTION YOU WILL RECEIVE A SAFE AND SECURE INVOICE FROM US WITH ALL INFORMATION NEEDED TO COMPLETE YOUR PURCHASE. PAYMENT IS EXPECTED IN A TIMELY FASHION. WE USE CALCULATED PRIORITY AND PARCEL POST SHIPPING.WE USE ALL THE CORRECT MATERIALS TO ENSURE A SAFE AND WORRY FREE DELIVERY. WE DO NOT PROFIT IN ANY WAY FROM SHIPPING. IT ACTUALLY COSTS US A GREAT DEAL OF MONEY ON SHIPPING SUPPLIES SO YOUR ITEM WILL ARRIVE AS SAFE AND SECURE AS WE CAN MAKE IT. NOTICE: DUE TO THE INCREASED LEVEL OF DAMAGE DURING TRANSIT. WE ARE NOW FORCED TO ADD THE COST OF INSURANCE TO YOUR SHIPPING TOTAL. WE WILL GLADLY EXCLUDE YOU FROM THIS ADDITIONAL FEE WHEN WE RECEIVE A MESSAGE FROM YOU DECLINING INSURANCE AND WAIVING ANY CLAIMS AGAINST DAMAGE OCCURED DUR
|
|
R100451-P54 McMaster-Carr E-Style Rings Zinc Plated(Click to Enlarge) Click to Enlarge) Product ID# R100451 This McMaster-Carr E-Style Rings Zinc Plated kit appears to be in good cosmetic condition with some signs of prior use or wear. I did not count how many pieces are in the box. Or how many have been used. They don't appear to be in the proper slots as shown. However, I lack the knowledge or equipment to test them, so due to no testing, this kit is being sold as-is. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems are 11" x 7" x 2" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated ... moreterms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $15.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 1.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal
|
|
ALOMA"B" PRE CUT STAINLESS SHIM SET LOT B ECONOMY KIT 3" X 3" Click to Enlarge Click to Enlarge Click to Enlarge Description: ALOMA"B" PRE CUT SHIM SET Model: B ECONOMY KIT 3"x 3" with tab for up to 3/4" bolt diameter 304 stainless steel 001.002, 003, 004, 005, 010, 020, and.050. This item appears to be in good used condition. Refer to pictures for details- ONLY 2/3 FULL CASE. New, item would cost over $425.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range ... moreof products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is
|
|
MAULDIN SS SHIM STOCK SET 2" X 2" SLOTTED 1" BOLT HOLE Description: MAULDIN STAINLESS STEEL SHIM STOCK SET 2" x 2" 1" bolt hole.001-125 thickness This item appears to be in good used and un-used condition. Refer to pictures for details. This set MAY OR MAY NOT be complete. Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality ... morebeyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open M
|
|
Set of 6 SWL 3/4T Clevis Rigging Screw Pin 5/8- Gently Used You will receive all 6 pins. As shown, gently used, though one screw is missing. Marked SWT 3/4T. As well as 5/8. USA shipping included. Check out my other items! Craig's Barn Payment: Payment is expected within 10 days of purchase. Shipping: We are generally able to ship within 1 business day. If we do not respond to you within that period of time. Please check our eBay store, Craig's Barn, to see if we have put up a closed notice. We charge actual estimated shipping plus a $2 handling fee. That fee covers expenses such as delivery confirmation. Tape, boxes, envelopes, peanuts, bubble wrap, etc. At times it also covers actual shipping costs when actual shipping costs are more than anticipated. In some cases handling fees ... moremay be more because we have to travel to Kansas City to get to the bus station to ship via Greyhound or because packaging requires more expensive materials such a corner boards or hardboard. Please use the shipping calculator below before bidding or purchasing an item. That way there are no surprises. Combined Shipping: We are happy to try to combine shipping when you purchase items from two or more listings from us. Sometimes items can't be safely combined(one item will damage the other) or the combination bumps your shipping costs into"oversize" or"irregular packaging" that costs more when we purchase shipping from a carrier. We are happy to work with you on this. When you purchase items from three or more listings please wait for an invoice before you pay.you will generally see a savings. Returns/Refunds: Returns must be made within 14 days following receipt of the item. Refunds are for merchandise only and do not include shipping or handling costs. Feedback: We believe that the sale is not complete until you have received your item and are satisfied. Therefore we prefer to give feedback after we have received feedback from you or after we have worked out any difficulties. Please communicate concerns s
|
|
|
You are bidding on all of the items shown. P lease see pictures and email me with any questions. See my other auctions; I will combine shipping when possible. If you have a question. Please ask it BEFORE the auction ends! Payment required within 2 days. No local pickup. No buy it now. PayPal only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f005ffbd5-0xf5-
|
|
|
Bidding on an Old Vintage Globemaster Eyelet Fastening Kit with strong release and Extra Eyelets. The kit was made in Japan and the Scovill Clinton eyelet refill packet was made in USA. Email me with any questions before bidding.
|
|
|
Unistrut 1-5/8" Metal Framing System. Lot of 5. 90° Angle Fitting. 3 Holes 3- P1822 Right Hand 2- P1823 Left Hand Hole Diameter: 9/16" 14.3mm) Hole Spacing(From End) 13/16" 20.6mm) Hole Spacing(On Center) 1-7/8" 47.6mm) Width: 1-5/8" 41mm) Thickness: 1/4" 6.4mm) Powered by
|
|
|
Please take the time to read the entire offer now so there are no misunderstandings later on. Photo are the actual 160 tiny rollers available. DATA:stainless steel non magnetic. 310 OD x.1725 T, hole is about.100. That is about all I really know about these. NO further listing, scrap if not sold. ASK QUESTIONS. Ebay now requires Pay-Pal payment unless buyer requests another method. Feedback posted about 20 days after shipping date. NO EXPORT* NO EXCEPTIONS* DON'T EVEN ASK. Auction void 10 days after closing w/a Non Paying Bidder Alert sent. If you have PRIVATE or"O" ZERO) please pass on my sales. No questions answered in the last 24 hours of the sale.
|
|
Eaton 3MTB1600BLK 750 MCM Group Metering Terminal Box 4-Piece Lug Kit Left Side: Right Side, Manufacturer: Eaton Model: 3MTB1600BLK Description: 750 MCM Group Metering Terminal Box Lug Kit Condition: Used. Scuffs& Scratches on surface. Packaging Condition Details: Slightly Distressed.Scuffs/tears, dirt on box. LUG KIT Application: Industrial. Hardware 750 MCM For Group Metering Use on Terminal Boxes Aluminum Construction Includes Hardware 4-Piece UPC: 782114792919*No further information found on item. Contents* Only the items pictured below are included. Includes: 4-Piece Lug Kit as pictured and described. Packaging Condition: Slightly Distressed We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card ... morePayments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest
|
|
|
Lot of 20 FOP convention pins. PayPal only. No refunds no returns. USA only. Posted with
|
|
You get everything in the picture. Payment by PayPal is expected within 3 days after auction closes. If you need more time to pay please email me within 3 days to let me know the situation. Failure to do so may result in a non-paying bidder notification being sent to EBay. Possibly limiting your ability to buy on EBay. Unless item is significantly not as described or item is defective. ALL SALES ARE FINAL! I do not ship outside the USA. I will combine shipping cost whenever possible to save the bidder money. I ship on Mondays. Wednesdays and Fridays. If you have any doubt about any product, email me first. Thanks! I will NOT give partial payment refunds if you only like one or two items sold in lots! I will NOT give partial refunds period. If it states in the description that the box is NOT ... moremint- That's what it means. email me if you need more details before you bid.
|
|
|
Discount Industrial Equipment& Supplies, | | | | | | | | | | | | CLICK ON PICTURE TO CHANGE VIEW. PRODUCT DESCRIPTION, IAR Stock# 3094 Condition Used-Excellent. Qty of Lots 1 Items In Lot 1. Location 655. U.S. SEAL PS-205 1.75Dia in bronze Shaft Seal U Make: U.S. SEAL. Model: PS-205. SPECIFICATIONS- See Tech Spec tab for more details. Diameter(in) 1.75. Color: bronze. Type: Shaft Seal. Weight(Lbs) 1. Shipping dimensions(L in) 5(W in) 2.5(H in) 2.5. Click here for Shipping Estimate(Save money with combined shipping) Tech Spec U.S. SEAL PS-205 1.75IN I.D. SHAFT SEAL. Compliance Compliance. 2C16] U.S. SEAL PS-205 1.75Dia in bronze Shaft Seal U.
|
|
nice pulley for v belt. Browning brand model bk90h crm PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. ... moreYOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items a
|
|
|
Total of 10- CBX-BF-1/8 Wedgelock Cleco Fasteners with 0- 1/2" Grip. These Fasteners have been hand tested and are in great working condition. Clecos pictured are the ones you will receive I combine shipping when posable. Thanks for looking. Powered by
|
|
|
100 Eyelets E 3165 Nickel Plated Brass. 092 OD. 1 54 Head. 530 Le ng th These are sizes I measured with my calipers. Online listed sizes might be slightly different Aircraft Surplus Made in the USA Buyer pays 3 oz US m ail s hipping
|
|
|
100 Eyelets A 1 271 Nickel Plated Brass. 430 OD. 540 Flat Head. 1 1 7 Le ng th.00 8 These are sizes I measured with my calipers. Online listed sizes might be slightly different Aircraft Surplus Made in the USA Buyer pays 3 oz US m ail s hipping
|
|
|
100 Eyelets A 1453 Gold Plated Brass. 273 OD. 406 Head. 187 Le ng th.009 These are sizes I measured with my calipers. Online listed sizes might be slightly different Aircraft Surplus Made in the USA Buyer pays 3 oz US m ail s hipping
|
|
|
AN COLLECTION OF MISC NAILS. WOOD& METAL SCREWS,WASHERS LEFT OVER FROM AN ESTATE SALE. EACH BOX CONTAINS AT LEAST 10LBS OF ITEMS INSIDE.
|
|
ALOMA MODEL"B" STAINLESS SHIM STOCK SET IN METAL STORAGE CASE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: ALOMA STAINLES SHIM SET"B" Aloma B Shim Kit Set Up to 3/4" Bolt Size 304 stainless steel Range from.002" thick to.125" This item appears to be in good used condition. Refer to pictures for details. This doesn't appear to be a complete set, about 90% full. Retail, this item would cost over $375.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus ... moreequipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in
|
|
Mint Hilti PS 200 Ferroscan PS200M Handheld Replacement Monitor Only This unit was purchase new in 2012. You are budding on what is in the pictures(the monitor only) no battery included. The scanner unit was lost so we only have the monitor. It comes fully guaranteed working. It was used only a couple times and is in Like New Condition. The screen still had the original plastic cover on it so the screen is perfect with no scuffs or scratches. This replacement unit From Hilti Retails for $8000. Item no. 031225 Serial no. 26911004 Manufacture date. 09-2011 Serenity Trades sells hundreds and hundreds of items each year and with this number of transactions occasional issues do arise. From broken roughly handled packages to the odd just stopped working vintage camera things are sometimes just out ... moreof our hands. Our goal is to make sure you have an awesome 100% positive transaction! It is vital that you as a buyer contact us if you have a problem. So far this year the only negative feedback we have received comes from buyers who did not bother contacting us. If you are a buyer who leaves negative feedback before contacting a seller Please BID elsewhere! Sincerely. Serenity Trades All Items ship on Thursday. Payment must be made prior to 5:00 PM EST Wednesday or shipment will be delayed. I ship Fedex or USPS when available. Our choice. I ship to your paypal address no exceptions! SHIPPING INFORMATION IS SENT TO YOUR PAYPAL EMAIL ADDRESS ONCE ITEM IS PICKED UP BY FEDEX. Payment must be received within 5 days. All merchandise is sold AS IS with no warranty or return policy, unless otherwise stated in the description of the item. Must be contacted within 3 days of delivery if you have an problems I work with buyers in providing quick and fair customer service. E-MAIL AND QUESTIONS NOT SENT DIRECTLY THROUGH EBAY WILL NOT BE ANSWERED.
|
|
|
STI M-621594-08-74 GENERAL INFORMATION: MANUFACTURED BY: STI, MANUFACTURER PART NUMBER: M-621594-08-74, DESCRIPTION: BOTTOM SUPPORT RING. 95 SERIES. CONDITION: PSSC- USED IN AUTOMATION RECOVERY PACKAGING- LOT OF 2* IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|
STI M-621594-08-68 REVISION A GENERAL INFORMATION: MANUFACTURED BY: STI, MANUFACTURER PART NUMBER: M-621594-08-68, REVISION: A, DESCRIPTION: 200 SERIES BOTTOM SUPPORT RING. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|
STI M-621594-08-76 GENERAL INFORMATION: MANUFACTURED BY: STI, MANUFACTURER PART NUMBER: M-621594-08-76, DESCRIPTION: CONTAINMENT RING 95 SERIES. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|
This is from a used machine. Sold as is.
|
|
|
One used 20 lb oxygen. Nitrogen cylinder with the pressure control valve that was used in a welding shop. Has you can tell it has been bumped around but it works like it should. You get what's in the picture.
|
|
|
One used 10 lb oxygen cylinder that was used in a welding shop. Has you can tell it has been bumped around but it works like it should. You get what's19.99 in the picture.
|
|
www.meci.com Falk Torque Arm 0785261 Click image to enlarge. Manufacturer: Part# MECI Part# Condition: Dimensions: Weight: Description: Falk 0785261 734-0138 Used-Used Great Condition 12" Length. 3" Width, 2" Height 4.2 Lbs Falk Torque Arm 0785261 Falk Torque Arm 0785261 4115JR-C Hardware Included Manufacturer: Falk Part# 0785261 Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Payment We accept the following forms of payment: PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& Discover) Please call MECI to make your Credit Card Payment 800-422-3525 ext 5 830am to 500pm EST Mon-Fri Shipping Cost and Policy USA USPS Priority ... moreMail or ground services are used. International Shipped USPS International Priority Mail or USPS First Class International. We will not mark as a gift in any circumstance. Shipping cost does not include import taxes. Duties or brokerage fees, these charges are the buyer's responsibility. Please check with your customs office to determine what additional cost my apply. COMBINED SHIPPING We will combine shipping the best we can. If you purchase other items we will put them in the same box if they can be shipped securely and safely together. Shipping cost at checkout will show the combined charges but additional charges may apply if needed. Please wait to make your payment until you have purchased all items. You have 3 days from the end of the first purchase to add additional items to your order. All of your purchases will be consolidated into one checkout with one payment. SALES TAX- For shipments to Ohio. We are required by State law to collect 7% Sales Tax. STORE PICKUP Please note in checkout the estimated date/time you want to pickup your item(s) Handling fee(if stated) sales tax still apply. Customer Service. Warranty& Return Info We are located at Mendelson Liquidation Outlet 340 East First Street Dayton. Ohio 454
|
|
|
You get 4 pounds of stainless steel hardware It will be mostly screws but have some nuts and washers in it. Sizes range from m2. 2 to 1/4-20, M4, M5, 10-32 and other sizes. There will be some non stainless mixed in. But you will get 4lbs of stainless Shipping to the US is $6. See below for the rest of the world. I will combine auctions to lower shipping costs. 2-6 hardware auctions shipped for $12 to the US.
|
|
|
Up for bid are these. Eye bolts 46 pcs 5/8-3/8" Various sizes there are some MM thrown in
|
|
|
Up for bid are these EYE bolts 28 pcs various sizes 5/8-1/2" There are some MM thrown in
|
|
|
Up for bid are these Eye bolts 50 pcs various sizes 5/8" 3/8" There are some MM thrown in the lot.
|
|
|
INGERSOLL RAND 13125 SHOE BRAKE GENERAL INFORMATION: MANUFACTURED BY: INGERSOLL RAND, MANUFACTURER PART NUMBER: 13125, DESCRIPTION: SHOE BRAKE. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f5043585f-0x102-
|
|
|
10 Large bolts. Dont know what they were used for.
|
|
|
JOLICO WDX14-60-0701A 387B242 TYPE 1 M24 RETAINER BOLT GENERAL INFORMATION: MANUFACTURED BY: JOLICO, MANUFACTURER PART NUMBER: WDX14-60-0701A 387B242, DESCRIPTION: RETAINER BOLT. M24, TYPE 1. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|
Nice old hitch or anchor pin that weighs just about a pound and measures 8" in length! I guess there are many uses for this such as.latching a dinosaur cage? Anyway. Nice early made piece of hardware for your consideration. Buyer to pay 3.95 sh. Paypal preferred.
|
|
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Lot of 2 Stainless 3/8" Turnbuckles. I'm not 100% sure, so there is NO guarantee, but these look new and unused to me. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, ... morewhichever comes first, are forfeited as abandoned and as payment for storage and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
Up for bis is this lot of Eye bolts 26 pcs various sizes 1/2-3/4-5/8" May have some MM in the set
|
|
|
Up for bid are these EYE bolts 14 pcs 1/2" 5/8" Thread size Various sizes. Length range from 6-4" or so.
|
|
|
VINTAGE STANLEY DROP LEAF TABLE SUPPORTS 1956 BROWN LACQUER HARDWARE 10" IN BOX UP FOR SALE IS THE ITEM SEEN IN THE PHOTOS! UNUSED. VERY GOOD CONDITION. Click Images to Enlarge PLEASE READ THE SIMPLE INSTRUCTIONS BELOW BEFORE BIDDING! IF YOU LIVE OUTSIDE THE U.S. THE POSTAGE WILL BE MORE THAN QUOTED! IOWA RESIDENTS PLEASE ADD 6% SALES TAX WITH YOUR PAYMENT. inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
PLEASE NOTE: Our website cmsurplus carries products of all kinds and nature mostly aftermarket automotive. Tools, industrial and household items. We always describe the items to the best of ability. If you have any questions or concerns after you purchase just let us know and we will address them very quickly. We always use an actual photo of the product, not a stock photo. you will appreciate the extra time and effort it takes to do this. PS602 POWER STRUT POWERSTRUT CONNECTOR The white lense is scratched You get as you see in this picture
|
|
|
7 Hook/Hook Galvinised and Aluminum Turnbuckles 3/8"Rod 5ea 9 1/2" long 2 ea 8" Long Turnbuckels will be diassemblred.To fit in a small flat rate priority mail box. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Easy to use. Superior adhesive strength, indoor/outdoor use, water resistant, adheres to most surfaces, including plastic! This stuff sticks to anything and lasts forever!
|
|
|
NOTE: During the week of May 6th we will not be shipping out any items. Please take that in consideration before you purchase.PULL HANDLE ASSEMBLY from Seagrave Fire Truck. Mostly brass with chrome pieces are brass with chrome layer. Red painted fixture is also brass. The handle pulls about 6.5" Total weight is about 3 lbs. Over all length of assembly is about 15" Brass needs polishing. Sold as is, as pictured. Buyer pays for shipping. Use for intented purpose or for parts or for art projects such as Steampunk or industrial decor. Questions, call 406-727-7700. location: off. at 13th. i.d. 4.
|
|
Here's a lot of approx 200 brass U-shaped pins. I'm not sure what they are for. Each measures 5/16" x 1/4. Check out my other auctions for more great finds. I will combine shipping whenever possible. So bid early and bid often! Terms and Conditions: Please ask all questions prior to placing a bid. Acceptable methods of payment are PayPal only due to eBay regulations. Payment must be received within 2 days of auction end. If payment is not received a non-payment dispute is automatically filed with eBay. Winning bidder is responsible for paying shipping and handling. I ship the next business day after payment is received. All items are sold‘as is’ unless otherwise noted. I evaluate items carefully and I do my best to describe items in detail including flaws. So please ask all questions ... morebefore bidding. Thanks for stopping by! Good luck bidding!
|
|
|
SEW EURODRIVE BW100-005 GENERAL INFORMATION: MANUFACTURED BY: SEW EURODRIVE, MANUFACTURER PART NUMBER: BW100-005, DESCRIPTION: BRAKE RESISTOR 500 WATT. 100 OHM, W/MOUNTING PLATE. CONDITION: FPOR- THIS ITEM APPEARS TO HAVE DEFECTS OR DAMAGE WHICH MAY INTERFERE WITH ITS NORMAL OPERATION OR INTENDED USE. PLEASE FOR REPAIR AND TESTING OPTIONS OR MORE INFORMATION. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|