|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Polyurethane P2 PU Foam Spray Gun Air Purge Spray Gun Self Cleaning Device Specifications: Max.fluid working pressure: 35Mpa Air inlet pressure: 0.2-0.12mpa Cleaning method: self cleaning with air Working flow: 1-12kg/min Mix Chamber Size: 1.3mm*2.1mm Spray nozzle size: 1.6mm/1.8mm Optimal spray distance: 0.5-1m Spraying material: polyurethane, polyurea Uses: tank pouring, panel house spraying, model casting, sculpture spraying, container spraying, cold storage spraying, exterior wall insulation, tank insulation, passenger car compartment, profile filling, etc.
0 bids Free Shipping
Condition: Used Location: Riverton, United States
Graco reactor E-30 reactor with 35 kW 3 ph generator and 300 ft of hose. Graco Fusion PC gun. Comes with two man Air supply, masks, T3 transfer pumps. Comes with about a half a set of open cell foam, drum mixers and all accessories. Works great. Lots of extras. Foam saws, etc. This hasn't been used since last summer and has was cleaned out the last time it was used. It currently has hydraulic oil ran through the system.
Buy It Now
Free Shipping
Condition: New Location: Hibbing, United States
Foam Sealant Kit, Insulation Value R-6.1, Application Multipurpose, Color Cream, Container Size 3 lb, Container Type Cylinder, Coverage 12 bd ft, Expansion Ratio 4:1, Full Cure Time 1 min, Includes Hose, Insta-Flo Dispensing Spray Gun, Iso Tank, Nozzle, Polyol Tank, Working Time 40 sec, Standards UL Classified, Application Method Straw, Environment Indoor, Outdoor, Maximum Application Temperature 100 Degrees F, Minimum Application Temperature 40 Degrees F, Number of Components 2.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
High toughness, not easy to break, reducing the risk of the drill bit breaking in the nozzle hole.
Buy It Now
Free Shipping
Condition: New Location: Dacula, United States
• Uses: Check Valve Screens Filter out debris in Resin and Isocyanate sprayed through the Graco Fusion AP gun. Spray Foam and More SmartParts Do Not Void Your Warranty. • Maker-Mfg. -Importer: Spray Foam and More SmartParts.
Buy It Now
$12.00 Shipping
Condition: New Location: Chino, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun, the Surface of the Gun Body Is Electroplated, Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm（Not included, customer configures by himself） , and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm（Not included, customer configures by himself） 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Max.fluid working pressure: 35Mpa. Spraying material: polyurethane, polyurea. NOTE: Need to beused with air compressor and polyurethane spraying machine. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
0 bids Free Shipping
Condition: New Location: Chino, United States
Handheld Automatic Polyurethane Spray Gun Foam Sprayer Double Head+2*1L Tank Polyurethane spray foam machine automatic spray gun professional Electroplating type double-head double-component spray gun， the surface of the gun body is electroplated， corrosion-resistant and easy to clean The stainless steel nozzle has a diameter of 1.3mm， and is equipped with 2 sets of internal pressurized 1000ml lower pots. 1. Feeding type: pressure 2. Best working pressure (bar / psi): 4/58 3. Pattern width (cm): about 40 4. Air consumption: 8-12cfm 5. Nozzle size (mm): 1.3mm 6. Air inlet: G1 / 4 The package includes: 1 * spray gun 2 * 1000ml aluminum water tank 1 * hose.
0 bids $20.00 Shipping
Condition: New Location: Monroe Township, United States
Features: 1. The pipe joint Angle, reduce the gun load, make operation easy. 2. Gas valve can prevent trigger is stuck. 3. Gas auxiliary spring can quickly cut into the mixing head of raw materials. 4. Jet linear continuous and smooth, no field control. 5. Pneumatic wrench can reduce the labor intensity of operators. 6. All steel hybrid head, output, precise control of spraying position, reduce the waste of raw materials, particularly applicable to residential construction between two walls of spraying. 7. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal. 8. Use manual switch valve, no tool can quickly and easily switch gun. 9. High pressure vacuum mixed to ensure the best.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun， the Surface of the Gun Body Is Electroplated， Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm， and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
Buy It Now
Free Shipping
Condition: New Location: Grand Rapids, United States
There are two types of can foam; "Gun Foam, and Straw Foam (used w/ a plastic straw)". Our guns, like all foam guns, work with all“gun foams”. The FOAM-STER Foam Gun hooks on your hip for easy access and leaves your hands free.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun, the Surface of the Gun Body Is Electroplated, Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm , and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun, the Surface of the Gun Body Is Electroplated, Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm , and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
Buy It Now
Free Shipping
Condition: New Location: Grand Rapids, United States
There are two types of can foam; "Gun Foam, and Straw Foam (used w/ a plastic straw)". They produce similar foam results. Your gun will not need to be cleaned after each use. Use the cleaner to "flush" the gun every 6 to 8 cans when using consistently.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
Free Shipping
Condition: New Location: , China
· Equipped with adjustable flow cap. And the piston can be locked to avoid accidental triggering when spraying is stopped. · Check valve can be removed for cleaning without removing other parts. B Component (Resin) Inlet Size 1/8 NPT(F).
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
0 bids Free Shipping
Condition: New Location: Charlotte, United States
Remains soft and flexible. GREAT STUFF™ Window & Door fits Pro Foam Dispensing Guns that give greater precision and access to hard to reach places. Great Stuff Pro Gun Foam, Windows & Doors, 20 oz Can x12.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
0 bids Free Shipping
Condition: New Location: Chino, United States
Specifications: Max.fluid working pressure:35Mpa Air inlet pressure: 0.2-0.12mpa Cleaning method:self cleaning with air Working flow:1-12kg/min Mix Chamber Size:1.3mm*2.1mm Spray nozzle size:1.6mm/1.8mm Optimal spray distance:0.5-1m Spraying material: polyurethane, polyurea Uses: tank pouring, panel house spraying, model casting, sculpture spraying, container spraying, cold storage spraying, exterior wall insulation, tank insulation, passenger car compartment, profile filling, etc. NOTE: Need to be used with air compressor and polyurethane spraying machine.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
The upgraded mix chamber and insert are a whole, which prevents mismatch between mix chamber and insert and is more convenient to use. M 02 Mix Chamber Equivalent size 5252.
Buy It Now
$0.56 Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: , United States
Specifications: Product: Foam Spray Gun Max.fluid working pressure: 24Mpa Air inlet pressure: 0.4-0.8mpa Cleaning method: self-cleaning with air Working flow: 2-9kg/min Mix Chamber Size: 1.3mm Spray nozzle size: 1.6mm Gross weight: 2.0kg Packing size: 210*100*100mm Optimal spray distance: 0.
0 bids Free Shipping
Condition: New Location: , United States
Package Included 1* Spray Gun 1* English User Manual Notes Please check the size carefully before ordering. Please use this product within the specified working pressure range (35Mpa). Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun, the Surface of the Gun Body Is Electroplated, Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm, and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
Buy It Now
Free Shipping
Condition: New Location: Katy, United States
EASY & STRONG BONDING: Fastcoat Polyurethane Spray Foam is paintable and adheres excellently to most building materials. Nozzle A is used for vertical applications, providing a wedged spray, while Nozzle B is designed for ceiling applications.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Polyurethane P2 PU Foam Spray Gun Air Purge Spray Gun Self Cleaning Free Ship Specifications: Max.fluid working pressure: 35Mpa Air inlet pressure: 0.2-0.12mpa Cleaning method: self cleaning with air Working flow: 1-12kg/min Mix Chamber Size: 1.3mm*2.1mm Spray nozzle size: 1.6mm/1.8mm Optimal spray distance: 0.5-1m Spraying material: polyurethane, polyurea Uses: tank pouring, panel house spraying, model casting, sculpture spraying, container spraying, cold storage spraying, exterior wall insulation, tank insulation, passenger car compartment, profile filling, etc. NOTE: Need to be used with air compressor and polyurethane spraying machine.
0 bids Free Shipping
Condition: New Location: Panama City, United States
Hand-tightened front cap – no tools needed to clean and maintain seals and mix chamber. Quick-release fluid housing - lets you easily change the mix chambers without tools.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Features: 1. The pipe joint Angle, reduce the gun load, make operation easy. 2. Gas valve can prevent trigger is stuck. 3. Gas auxiliary spring can quickly cut into the mixing head of raw materials. 4. Jet linear continuous and smooth, no field control. 5. Pneumatic wrench can reduce the labor intensity of operators. 6. All steel hybrid head, output, precise control of spraying position, reduce the waste of raw materials, particularly applicable to residential construction between two walls of spraying. 7. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal. 8. Use manual switch valve, no tool can quickly and easily switch gun. 9. High pressure vacuum mixed to ensure the best.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Portable P2 PU Foam Spray Gun Polyurethane Air Purge Self Cleaning Single Valve. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal.
Buy It Now
$8.99 Shipping
Condition: New Location: , United States
"GREAT STUFF MODEL 230408". SPRAY FOAM INSULATION GUN. Economical Model With Replaceable Barbed Dispensing Nozzle. PRO GUN 13 - PRO-SERIES.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
2 1000ml Aluminum Water Tank. Polyurethane Spray Foam Machine Automatic Spray Gun Professional. 1 Spray Gun. TypePolyurethane spray foam machine automatic spray gun. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: New Location: Freehold, United States
Top quality foam gun dispenser. 2 Professional Foam Gun Applicators. PTFE Non-Stick coated adapter basket, dispensing needle and ball valve promote easy cleaning. Our foam guns are the highest quality money can buy at this affordable price.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun， the Surface of the Gun Body Is Electroplated， Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm， and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Spray Applicator Cleaner, Capacity 12 fl oz, Color Clear, Features Acetone Based, Can Be Attached to Handi Tool Dispensing Units, Cleans Dispensing Units, Dissolves Uncured Foam and Adhesives, For Use With Applicator Guns, Gun Foam Sealants and Adhesives, Includes Straw Applicator, Product Type Foam Dispenser Cleaner.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
$3.00 Shipping
Condition: New Location: Monroe Township, United States
Specifications: Max.fluid working pressure:35Mpa Air inlet pressure: 0.2-0.12mpa Cleaning method:self cleaning with air Working flow:1-12kg/min Mix Chamber Size:1.3mm*2.1mm Spray nozzle size:1.6mm/1.8mm Optimal spray distance:0.5-1m Spraying material: polyurethane, polyurea Uses: tank pouring, panel house spraying, model casting, sculpture spraying, container spraying, cold storage spraying, exterior wall insulation, tank insulation, passenger car compartment, profile filling, etc.
0 bids $5.00 Shipping
Condition: New Location: Glenarm, United States
Pour Tip Kit Part # GU-815-53.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polyurethane spray foam machine automatic spray gun professional. 2 1000ml aluminum water tank. Your satis faction is our ultimate goal. MPNDoes Not Apply. EANDoes not apply. ISBNDoes not apply. UPCDoes not apply.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
P2 Black Air Purge Spray Gun. NOTE: Need to be used with air compressor and polyurethane spraying machine. The spray gun is lightweight, easy to handle and simple maintenance, even in the difficult position of spray can and spray ease of operation, its excellent production efficiency has been widely recognized by the industry.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Includes 1 1-3/8” AIR PISTON, 1 1-1/2” AIR PISTON And 3 O-Rings. The AIR PISTON is made of Carbon steel and will not break. We don't use aluminum.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Spraying material: polyurethane, polyurea. NOTE: Need to beused with air compressor and polyurethane spraying machine. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal.
0 bids Free Shipping
Condition: New Location: Charlotte, United States
GREAT STUFF™ Window & Door Remains soft and flexible. fits Pro Foam Dispensing Guns that give greater precision and access to hard to reach places. Great Stuff Pro Gun Foam, Windows & Doors, 20 oz Can x12.
Buy It Now
Free Shipping
Condition: New Location: Santa Fe Springs, United States
Graco A-side (ISO) check valve assembly 246731.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Features: 1. The pipe joint Angle, reduce the gun load, make operation easy. 2. Gas valve can prevent trigger is stuck. 3. Gas auxiliary spring can quickly cut into the mixing head of raw materials. 4. Jet linear continuous and smooth, no field control. 5. Pneumatic wrench can reduce the labor intensity of operators. 6. All steel hybrid head, output, precise control of spraying position, reduce the waste of raw materials, particularly applicable to residential construction between two walls of spraying. 7. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal. 8. Use manual switch valve, no tool can quickly and easily switch gun. 9. High pressure vacuum mixed to ensure the best.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specifications: Max.fluid working pressure:35Mpa Air inlet pressure: 0.2-0.12mpa Cleaning method:self cleaning with air Working flow:1-12kg/min Mix Chamber Size:1.3mm*2.1mm Spray nozzle size:1.6mm/1.8mm Optimal spray distance:0.5-1m Spraying material: polyurethane, polyurea Uses: tank pouring, panel house spraying, model casting, sculpture spraying, container spraying, cold storage spraying, exterior wall insulation, tank insulation, passenger car compartment, profile filling, etc.
Buy It Now
Free Shipping
Condition: New Location: Springfield, United States
Pella window and door low expansion proven not to buckle, distort, or bow any door or window frame
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Features: 1. The pipe joint Angle, reduce the gun load, make operation easy. 2. Gas valve can prevent trigger is stuck. 3. Gas auxiliary spring can quickly cut into the mixing head of raw materials. 4. Jet linear continuous and smooth, no field control. 5. Pneumatic wrench can reduce the labor intensity of operators. 6. All steel hybrid head, output, precise control of spraying position, reduce the waste of raw materials, particularly applicable to residential construction between two walls of spraying. 7. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal. 8. Use manual switch valve, no tool can quickly and easily switch gun. 9. High pressure vacuum mixed to ensure the best.
0 bids $150.00 Shipping
Condition: New Location: , KW
Component A Inlet Thread Type:UNF. Component B Inlet Thread Type:UNF. Inlet Thread Type:NPT. Component A Inlet Size (in):1/2-20. Component B Inlet Size (in):9/16-18. Component Type:Plural-Component.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Polyurethane P2 PU Foam Spray Gun Air Purge Spray Gun Self Cleaning Free Ship Specifications: Max.fluid working pressure: 35Mpa Air inlet pressure: 0.2-0.12mpa Cleaning method: self cleaning with air Working flow: 1-12kg/min Mix Chamber Size: 1.3mm*2.1mm Spray nozzle size: 1.6mm/1.8mm Optimal spray distance: 0.5-1m Spraying material: polyurethane, polyurea Uses: tank pouring, panel house spraying, model casting, sculpture spraying, container spraying, cold storage spraying, exterior wall insulation, tank insulation, passenger car compartment, profile filling, etc. NOTE: Need to be used with air compressor and polyurethane spraying machine.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Spraying material: polyurethane, polyurea. NOTE: Need to beused with air compressor and polyurethane spraying machine. Single valve device can prevent ISO material and POLY material flow back, and not apart gun, which can check the gun inside most of the seal.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polyurethane spray foam machine automatic spray gun professional Electroplating type double-head double-component spray gun, the surface of the gun body is electroplated, corrosion-resistant and easy to clean The stainless steel nozzle has a diameter of 1.3mm, and is equipped with 2 sets of internal pressurized 1000ml lower pots. 1. Feeding type: pressure 2. Best working pressure (bar / psi): 4/58 3. Pattern width (cm): about 40 4. Air consumption: 8-12cfm 5. Nozzle size (mm): 1.3mm 6. Air inlet: G1 / 4.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polyurethane Spray Foam Machine Automatic Spray Gun Professional Electroplating Type Double-head Double-component Spray Gun, the Surface of the Gun Body Is Electroplated, Corrosion-resistant and Easy to Clean the Stainless Steel Nozzle Has a Diameter of 1.3mm , and Is Equipped with 2 Sets of Internal Pressurized 1000ml Lower Pots. 1. Feeding Type: Pressure 2. Best Working Pressure (bar / Psi): 4/58 3. Pattern Width (Cm): About 40 4. Air Consumption: 8-12cfm 5. Nozzle Size (Mm): 1.3mm 6. Air Inlet: G1 / 4 The Package Includes: 1 * Spray Gun 2 * 1000ml Aluminum Water Tank 1 * Hose.
0 bids Free Shipping
Condition: New Location: Chino, United States
P2 PU Foam Spray Gun Polyurethane Air Purge Spray Gun Self-Cleaning 35Mpa Black. Spraying material: polyurethane, polyurea. NOTE: Need to be used with air compressor and polyurethane spraying machine.
|
|
|
|