In 
Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
84.99
Buy It Now
Free Shipping
Condition: New
Location: Aurora,NE,USA
$
338.95
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
899.00
Buy It Now
Free Shipping
Condition: New
Location: Brighton,IL,USA
$
1200.00
Buy It Now
$110.00 Shipping
Condition: Used
Location: Juneau,WI,USA
$
695.00
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
895.00
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
74.95
Buy It Now
$15.95 Shipping
Condition: New
Location: Oroville,CA,USA
$
579.95
Buy It Now
$34.95 Shipping
Condition: New
Location: Cottage Grove,OR,USA
$
825.00
Buy It Now
Free Shipping
Condition: Used
Location: Charlotte,NC,USA
$
1049.00
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
500.00
Buy It Now
Free Shipping
Condition: Used
Location: Redding,CA,USA
$
300.00
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
44.99
Buy It Now
Free Shipping
Condition: Used
Location: Buffalo,NY,USA
$
139.95
Buy It Now
$45.95 Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
17.95
Buy It Now
$9.99 Shipping
Condition: New
Location: Oroville,CA,USA
$
149.95
Buy It Now
$6.99 Shipping
Condition: Used
Location: Scottsdale,AZ,USA
$
1150.00
Buy It Now
$29.00 Shipping
Condition: Used
Location: San Diego,CA,USA
$
100.55
Buy It Now
$20.95 Shipping
Condition: New
Location: Australia
$
81.95
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
750.00
Buy It Now
$35.00 Shipping
Condition: New – Open box
Location: San Antonio,TX,USA
$
27.16
Buy It Now
$13.97 Shipping
Condition: New
Location: Australia
$
121.50
Buy It Now
$38.40 Shipping
Condition: New
Location: Australia
$
900.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: San Antonio,TX,USA
$
40.00
Buy It Now
Free Shipping
Condition: Used
Location: Barberton,OH,USA
$
257.65
Buy It Now
$33.52 Shipping
Condition: New
Location: Australia
$
40000.00
Buy It Now
Free Shipping
Condition: Used
Location: Spring Branch,TX,USA
$
125.00
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
159.95
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
257.65
Buy It Now
$33.52 Shipping
Condition: New
Location: Australia
$
499.99
Buy It Now
Free Shipping
Condition: Used
Location: Denver,CO,USA
$
149.95
Buy It Now
$29.00 Shipping
Condition: New
Location: Oroville,CA,USA
$
975.00
Buy It Now
Free Shipping
Condition: Used
Location: North Port,FL,USA
$
1200.00
Buy It Now
Free Shipping
Condition: Used
Location: El Paso,TX,USA
$
180.00
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
500.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Old Hickory,TN,USA
$
45.39
Buy It Now
$50.62 Shipping
Condition: New
Location: Australia
$
322.49
Buy It Now
$21.99 Shipping
Condition: New
Location: Statesville,NC,USA
$
56.95
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
269.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: Ontario,CA,USA
$
46500.00
Buy It Now
Free Shipping
Condition: Used
Location: Kingman,AZ,USA
$
34.21
Buy It Now
$13.97 Shipping
Condition: New
Location: Australia
$
40.00
Buy It Now
$10.65 Shipping
Condition: New
Location: San Antonio,TX,USA
$
24.99
Buy It Now
Free Shipping
Condition: Used
Location: Buffalo,NY,USA
$
21.64
Buy It Now
$40.39 Shipping
Condition: New
Location: Australia
$
18000.00
Buy It Now
Free Shipping
Condition: Used
Location: Scottsdale,AZ,USA
$
190.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Oklahoma City,OK,USA
$
200.00
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
44.99
Buy It Now
Free Shipping
Condition: Used
Location: Buffalo,NY,USA
$
1400.00
Buy It Now
Free Shipping
Condition: New
Location: Marysville,CA,USA
$
15000.00
Buy It Now
Free Shipping
Condition: Used
Location: Hookstown,PA,USA
$
84.95
Buy It Now
Free Shipping
Condition: New
Location: Ypsilanti,MI,USA
$
589.00
Buy It Now
Free Shipping
Condition: Used
Location: Petaluma,CA,USA
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Middleton,ID,USA
$
259.99
Buy It Now
Free Shipping
Condition: Used
Location: Boca Raton,FL,USA
$
48.44
Buy It Now
Free Shipping
Condition: New
Location: Denver,CO,USA
$
17.46
Buy It Now
$40.39 Shipping
Condition: New
Location: Australia
$
27.90
Buy It Now
Free Shipping
Condition: New
Location: Australia
$
24.09
Buy It Now
$27.23 Shipping
Condition: New
Location: Australia
$
175.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Dunellen,NJ,USA
$
199.95
Buy It Now
$59.95 Shipping
Condition: New
Location: Oroville,CA,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
METAL MINING PAN 12" PAN GOLD PROSPECTING MINING EQUIPMENT This item has FREE shipping anywhere in the U.S.A. 12" METAL MINING PAN IN GOOD CONDITION. READY TO START A NEW VENTURE? PAN YOUR OWN GOLD OR OTHER PRECIOUS MEDALS. BE A PROSPECTOR. I FOUND A FEW OF THESE AT AN AUCTION IN PHOENIX A FEW MONTHS BACK AND THOUGHT THEY WERE GREAT.
Only used one time. Almost brand new gold recovery wheel.
Legal Disclaimer This item is being sold"AS IS. AS SEEN" without recourse. All repairs and inspections are the responsibility of the buyer. No representation, promise or warranty, expressed or implied, has been made regarding the vehicle's condition, merchantability, suitability or fitness for a particular purpose. All sales are final. Read this before you bid! Bidders with negative or zero rated feedback must get bid approval first or your bids will be removed from all my auctions. ... moreA nonrefundable deposit of $1000.00 is due within 48 hours to secure vehicle. Balance due within 7 days of auction close. Seller reserves the right to end the auction early without any liability to the seller. All bidders must be able to pay for the vehicle. Financing must be secured prior to bidding. Payment must be made by cash in person. Certified check. Buyer is responsible for all shipping costs. Remember that your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle. The time to decide if you want vehicle is BEFORE you place your bid. We are located only 120 miles north of Boston, and 240 miles south of Montreal in tax free New Hampshire.
Early 1900's Climax stone crusher. Manufactured by Climax Road machine Co. Marathon. Ny
ALASKAN 12 INCH"GOLD PANNING" PAN Description 12" Novelty Gold Mining pan which is 3" in depth, Pan contains an etched resin placquard depicting Gold Miner and Alaskan Scenery. Pan is black in color with white& grey resin insert. Item is in Good condition with slight oxidization on back of pan. DVD'S Video Games and All Electronics are Sold AS IS Please Also Note that many of the Items we Make Available come from Auctions and Estate Sales and are Presented to you in the ... moreExact Same Condition as We Pruchased Them In Some Cases We Will Take the Extra Time to Clean an Item. But Most Times we Want to Extend the Best Deal to You, Our Customers, and in Order to Offer Items on Auction at a Low Starting Price, we Forgo the Extra Time and Supplies Necessary to Clean Them Our Preferred Ship Method For Collectibles is Priority Mail Our Shipping rates are Based on the Following Information: USPS Actual Shipping Cost USPS Insurance Box or Envelope When Necessary Packaging Materials that May Include: Bubble Wrap Peanuts Foam Tissue Paper Batting Materials Used are Based on the Fragility of the Item. All Book and Paper GoodsShip Medial Mail Unless Otherwise Agreed Upon. We are Always Happy to Discuss Other Options with our Buyers; Simply Contact Us! Please Send Your Inquires Through the eBay Message Center to Ensure a Response. OUR SHIPPING RATE IS BASED ON THE FOLLOWING INFORMATION: Please Refrain From Leaving Feedback Until We Have Been Given an Opportunity to Address any Concerns You May Have. We cannot Fix an Issue We are Unaware Of. Our Goal with Every Transaction is to Trade POSITIVE FEEDBACK With our Customer. We Also Offer Combined Shipping on Most of Our Items. WE RESERVE THE RIGHT TO CHANGE SHIPPING METHOD DEPENDING ON SHIPPING LOCATION AND FINAL SELLING VALUE AT NO ADDITIONAL CHARGE* We Will Ship International Purchase the Most Economical Way Possible Unless Otherwise Agreed Upon. Materials Used are Based on the Items Fragility. We Take Extreme Measures to Assure Your item Arrives in the Sa
We pay CA$H for surplus business and industrial assets! Currently over 30.000 items in liquidation at our 100,000 sqft warehouse& on our website by clicking on Our Asset# KSC529- 1.1-2 Qty available: 2 EAGLE IRONWORKS GEARBOX for 36" to 38" LOG WASHER Gallery Photo Customer Service Contact below Appraised Value: $6.900.00 FACTORY NEW replacement or price when new: $0.00 Est. Rigging fees $35 per 1.000 lbs: Est. Packaging: POR Condition: 3. Refurbished: See ad for details Guaranty: ... more2. See our 7 day return policy! Full Description or Background We have two of these logwasher gearboxes. One is excellent used that was a STAND BY box for a power plant washing coal. The other was completely rebuilt by a professional shop(HANCO) We talked to the parts department at EAGLE IRONWORKS and they said a new one is selling for $40k each. Manufacturer: Eagle Iron Works Ratio: approx 19:1 Weight: approx 6930 lbs each Description: One unit is a spare and was rebuilt in April 2010 by Hanco. The other unit was working when removed from service. See attachment for additional information. Condition: 1 GOOD USED asking $6950.00 1 REBUILT by HANCO at a cost of $9950.00. Tag Photos or information Manufacturer: EAGLE IRONWORKS Model: 36" or 38" LOG WASHER GEARBOX Serial# Year: HP/Amp/KW/KVA: Voltage: Phase: Other Info: We are not dealers or experts of assets we liquidate. KSC personnel may not have the expertise to detect errors when reading a tag. The above information is entered because the tag photo may not be clear. This info should is for reference only. KSC can not guaranty this info. Contact original manufacture for detailed information on this asset. Terms& Conditions: Click here Detail Photos* Factory Information* King Surplus is not making any representations. Warranty of merchantability or any implied warranty of fitness for a particular purpose. For reference only: THESE GEARBOXES FIT THE FOLLOWING SIZE EAGLE IRONWORKS LOG WASHERS Log Washer Size Capacity T.P.H. Max. Mat’l Size Water Req’d Elec. Mot
How do you even find a category for this? It is I'm sure one of a kind purpose built and I'm quite sure for a staggering amount of money. I really cannot find any info on this. It does have a serial number stamped above the hatch door.but. It has mass hydraulics and what looks like scuba air tanks that must be for emergency's? Again? The"sub" is set up tethered for surface air and hydraulics.I thought about Battery powered hydraulics.then I watched"Alaskan Gold Rush" ... moreand now I finally figured out what one should do with this. As far as shipping, I can work with your shipper to help load. But cost? Posted with
This is a 1986 vintage Little Camel gold panning machine. Book included. It has been used but still works well. Please note all of the pictures carefully. The spiral pan has a small crack in it. It is repairable by fiberglassing. The little camel is designed for the desert it can work all day with just a few gallons of water. It consists of a rotating pan that contains 7 separate concentric spiral riffles. The pan is rotated by an all gear drive powered by a 12 volt gear motor. The pan and drive ... moreassembly is mounted on a 3 gallon water supply tub which houses the 12 volt re circulating pump and the tailings catch tub. Please contact me with questions. Posted with On Apr-17-13 at 19:06:23 PDT. Seller added the following information: I have added an additional picture of the crack in the pan. It shows the crack a little more closely. Someone asked if it has a variable speed. It does not
Very lightly used. Low hour machine.Has Deutz diesel engine with 1360 hours on it that runs great. All conveyors are variable speed and work properly. Machine is job ready bid with confidense! For sale locally, we reserve right to end auction if sold. Posted with
For Sale: Aluminum Construction Vibrating Wash Plant with Sluice Box. We are listing this for an employee. He built this and has used it successfully for the past year. His operation has out-grown this unit and he asked us to list it. Dead Iron is not able to offer advice on mining, but specific questions will be forwarded to him for response. This all aluminum wash plant has 3 levels of screening on the 120volt powered table. The table uses removable legs and has a spring insulated bed. The all ... morealuminum sluice box also has removable legs. It is cleanable with 4 easy to use thumb screws. The main table measures 5ft long by 2 ft wide. It is 4' high with the legs. The sluice measures 4ft long. 26" tall at the max, and has a 12" main chute area. The PVC water system has a standard hose connection and distributes throughout the 3 stages of screening. There is a clean-out plug at the end when debris starts clogging the holes. A gas pumped trash pump was used in the field and is NOT included. When the legs are removed and the sluice/legs are placed inside the wash plant. The package measures 56.5" long, 27" wide, and 30" long. This is a compact package. Weighs 55 pounds. That is EVERYTHING! Shipping is actual cost from our commercial shop in Bozeman. MT 59718. We will assist with truck loading if needed. Can also be palletized if needed. This might be able to ship UPS, expect 70 pounds well packaged.
This is a 3x5' topsoil screener. It is ready to run. It has 2000 hours. This machine has a remote tipping grizzly(needs remote) It also has a soil shredder above the screen for optimal screen efficency. Have a shredder mill rebuild kit to make this machine even more aggresive. Pull this machine on a job site and get right to work. This machine was working in my operation at the end of the last year. Very. Very effective on rocky soil. Make me an offer very negotiable. Buyers can inspect just ... morecontact me to set it up. For sale locally also.
Proline Gold Prospecting Suction Hose Float Pontoon Mining Dredge Highbanker Water Pump Equipment Manufacturer: Proline Mining Equipment. Coulterville, CA USA Pump Manufacturer: Shin-Daiwa Kogyo Co. LTD ShinDaiwa GP450 Professional Water Pump Air Cooled Engine 2.3 hp@ 8000 rpm Max Pump Head 155 ft Pump Delivery 66 gal. Suction Head 27 ft 2" suction hose We tested it using a garden hose as shown in the photos. Normal 0 false false false EN-US X-NONE X-NONE PAYMENT: Paypal payment is due immediately ... morefor“Buy-it-now” listings and within 72 hours for auction listings. We reserve the right to relist the item if the buyer does not respond or payment is not received within 72 hours. Local Pick-Up Option: The buyer is responsible for arranging the item pickup within a week of the item selling date. The buyer can pickup the item himself/herself or make arrangements for his/her representative and/or shipping service to pick up item. As it is considered one of the same. Items picked locally must be inspected and tested as needed by the buyer or buyer’s representative for final approval prior to actual pickup. Normal 0 false false false EN-US X-NONE X-NONE ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And if purchased, it is exactly what you will receive. Only the item(s) shown in the photos are included. Please see all photos for details and condition. If an item is used, please note that it will have the expected wear when purchasing used goods. All measurements are approximates. Items are sold in“as is” condition; and returns are not accepted, unless a serious and gross error was made in the listing. Normal 0 false false false EN-US X-NONE X-NONE
WORLDS BEST DREDGE PUMP! Toyo DP 7.5 but instead of the standard 7.5 hp motor. Comes with the premium upgrade 10 hp. motor, hence DP 7.5-10 model number. This is a submersible electric 3 phase pump with a 4" discharge that Toyo claims can pump 70% solids!$$ See link(type double u double u double u and copy the following) toyopumps.com/toyo_html/dp-submersible-pumps.html See videos toyopumps.com/agitator.aspx youtube.com/watch?v=JT33Yl7Hjwk youtube.com/watch?v=jL0n528t5Mc This pump has no wear ... moreand only 10 hrs(if that) on it. It has been in storage. Forgotten about collecting dust, until recently rediscovered. New they cost almost 10k. This one is a steal and hard to find so don't miss out! Call me if you want. Todd 7272784891
LOCAL PICKUP ONLY. NO SHIPPING. I have for sale the US Prospectors G1 Concentrator. I have made a couple modifications to this high banker including deep v matting in upper tray. And removable deep v matting with miners moss in top of lower tray. Also included is a second lower G1 lower sluice tray that has the same modifications. As well as a Honda WX 15(great condition) Custom dredge crash box for G1, dredge nozzle and hose, suction hose, 25' lay flat hose, 75' lay flat hose, standard ... moredredge adapter that comes with the G1. This little set up has treated me very well and works great for a one or two man operation. Their is a good chance that I will be moving to San Diego so the likes of getting to use this unit is unlikely. All items are in excellent operational condition. If you have any questions please feel free to ask. If you would like more pictures let me know and I can email them out. Thank you for looking, Kyle On Apr-20-13 at 13:31:11 PDT. Seller added the following information: These items are located in Auburn. CA NOT Susanville, CA. On Apr-20-13 at 13:42:31 PDT. Seller added the following information: The 25' lay flat hose has a small hole towards one of the connectors but is an easy fix.
7 foot Jarva Rock Boring Machine with Hydraulic Car and 1 cutter head with 2 dressing cutters and conveyors. Equipment was used 5 years ago and worked at that time. It should still work but is being sold as is. Local pickup only.
A D348 Caterpillar Generator. That produces 4160 volts of electricity. Comes with a disconnect switch. Equipment was used 5 years ago and worked at that time. It should still work but is being sold as is. Local pickup only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e40394143-0xf6-
FINISHING TABLE THAT SCREENS FROM THE TOP A 3/16 DIVIDES LARGER AND SMALLER CONCENTRATES TO OPPOSITE SIDES OF TABLE. ANYTHING TO LARGE FOR THE TABLE GOES OVER A SLUICE BOX. BRINGS CONCENTRATES TO NEAR PERFECT/BLACK SANDS NIK(702) 461-1931.
2005 W900 Kenworth. 676,135 Miles, 86" Studio Sleeper, C-15 Caterpillar 550 H.P. Accert Engine, Engine Brake, Recent 18 sp. transmission(warranty) 11R 24.5 tires, Polished Aluminum wheels, New Bumper, Rig Master Power Unit, Power windows, Cruise Control, 290 in. wheel base, paint in very good condition, Tires 50% plus, Brakes 50% plus, VERY CLEAN STUDIO, LOTS OF EXTRA CHROME, SUNROOF, COUCH, FRIG, THIS TRUCK HAS IT ALL! Trailer sold separate, available with truck or after truck sells. on the ... moreroad now. LOCATED IN Apache Junction. AZ, THANKS FOR LOOKING. CALL GARY 480-694-9479 WITH ANY QUESTIONS UNIT IS SUBJECT TO PRIOR SALE AND IS SOLD"AS IS WHERE IS" OUR EBAY FEEDBACK SPEAKS FOR ITSELF. ANY QUESTIONS. CALL GARY AT 480-694-9479 OR EMAIL ME. YOUR QUESTIONS ARE IMPORTANT. BUYER RESPONSIBLE FOR THEIR LOCAL SALES TAX. Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 ANY QUESTIONS. CALL ME PLEASE AND THANKS FOR LOOKING CALL GARY AT 480-694-9479 WITH ANY FREIGHT OR PAYMENT QUESTIONS UNIT IS SUBJECT TO PRIOR SALE AND IS SOLD"AS IS WHERE IS" OUR EBAY FEEDBACK SPEAKS FOR ITSELF. ANY QUESTIONS. CALL GARY AT 480-694-9479 OR EMAIL ME. YOUR QUESTIONS ARE IMPORTANT. BUYER RESPONSIBLE FOR THEIR LOCAL SALES TAX.
2008 Cam superline 25 ton heavy equipment trailer 3 axle 65.000 gvwr air lift front axle 31 foot trailer with 7.5 dovetail and self-cleaning ramps outriggers 1 foot goes to 10.6 wide load under body tool box tires at 70- 75% Private Contractor owned LOCATED IN New York state THANKS FOR LOOKING. CALL GARY 480-694-9479 WITH ANY QUESTIONS UNIT IS SUBJECT TO PRIOR SALE AND IS SOLD"AS IS WHERE IS" OUR EBAY FEEDBACK SPEAKS FOR ITSELF. ANY QUESTIONS. CALL GARY AT 480-694-9479 OR EMAIL ME. YOUR ... moreQUESTIONS ARE IMPORTANT. BUYER RESPONSIBLE FOR THEIR LOCAL SALES TAX. Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 ANY QUESTIONS. CALL ME PLEASE AND THANKS FOR LOOKING CALL GARY AT 480-694-9479 WITH ANY FREIGHT OR PAYMENT QUESTIONS UNIT IS SUBJECT TO PRIOR SALE AND IS SOLD"AS IS WHERE IS" OUR EBAY FEEDBACK SPEAKS FOR ITSELF. ANY QUESTIONS. CALL GARY AT 480-694-9479 OR EMAIL ME. YOUR QUESTIONS ARE IMPORTANT. BUYER RESPONSIBLE FOR THEIR LOCAL SALES TAX.
Boulder Buster W/Mat Travel Box. And User Manual Boulder Buster W/Mat. Travel Box, And User Manual This unit is used but in good condition. We are not able to test this unit. Everything that is included is shown in the pictures. 3-1. Disclaimer The item offered here is in no way recommended or certified for any specific use. By purchasing this item you agree that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any ... moreway with this item. By purchasing or bidding on this equipment you are indicating your acknowledgement of and agreement to the terms of this disclaimer. We strive for 5-star service by stating upfront our policies. Shipping rates and shipping frequency. We strive to earn 100 percent'5 Star' scores from you. The star-scores are very important to us, because eBay uses them to determine our fees and our visibility in the eBay search results. Our future success depends on it! —Thank you!
This is a used 4" Vermeer carbide directional drilling bit. Bit is in very good condition. This was used on my Vermeer D7x11 Series II drill. I am retiring and selling the rest of my equipment.
In this listing are included 2 Grizzly Gold Pans. Which measure appx. 14" long by 4.75" at the deepest; 1 Gold Miser Sluice Box, which measures appx. 10" long by 4.5" at the widest; 4 rubber stoppers for the Grizzly Pans(2 extra) and one one-hour instruction video(VHS) which teaches you how to get 5-10x more gold; the science of gold mining; and instructions how to use the equipment. This equipment has been mildly used on the Kern RIver- and it HAS found gold. We moved out of ... moreCalifornia and have no where to use it at our current location.
MARATHON ELECTRIC MOTOR# WF182TTDR7211ADL HP: 75 Speeds: 2 Variable Torque Voltage 460 Shaft Length: 2.75 Shaft Diameter: 1 Key Width: 7/16 RPM: 1734 This item will be shipped out within 1 Business Day of Recieving Payment If You Would Like to Purchase More than One Lot or Have any Questions call 417-499-8240 If No Answer Leave a Message Will Get Back with You as Soon as I Can There are no Returns on this Item
Here is a great way to get some high end starter gold mining equipment. All used just one time! Blue bowl never used! Included in this lot: Check out for all these fine products: 1 Blue Bowl Concentrator($77 new) 2 Large 11" screens size 8 and 20($22 ea. new) 1 size 18 small mesh screen($12 new) 1 Garrets combination sifter($8 new) 2 Pioneer mining gold pans($8 ea new) 1 JSP gold testing kit 10-14-18K gold. Magnifying glass. Funnel, bottle. All of these items are in great shape. Barely used ... moreand ready for action, over $150 to buy new, save $$. Email me with any questions. Thanks.
Normal 0 Normal 0 1990 Cat 834B Wheel Tractor Compactor Hour Meter Reading Unknown Engi ne was Rebuilt@ 5000 Hours S/N 92 Z( USA) Engine 3408E 450 Horse Power Fast Fuel System No Spin Rear Differential Larger Steering Pump Transport Dims Weight: 102.21 3 Lbs. Length: 28' 7" Width: 11' 8" Height: 13' 6" Stock# 10150 Location: Montana Call Us For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& ... moreNOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
Antique blasting galvanometer"Austin Powder" needs battery. Posted with
Kenworth Water Well Drilling Rig Normal 0 Price $49.900 Or Best Offer Fob Montana Stock# 9010 Location: Montana Call Us For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& ... moreOCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
OK all you smaller miners! this is the tool for you! This is the tool you need to go out and make your rocks powder to table down to GOLD! This is and was designed to be used in conjunction with a Jaw-crusher and tables. Takes very little water and in fact I have a separate vacuum attachment so you could run it dry if need be? This has a conventional 2" ball hitch to tow it around with. I think it weigh's around three TONS but pulls pretty easy with a half ton truck. The mill it'self ... moreis a"PRATER" and was used to shred up bolts and nuts that did not make spec in a factory! Think about that for a minute? Now you know it will have no problem chewing up your hard-rock from your mine! Really it performs best if you can feed it a steady 3" to 4" minus material. usually takes it down to tabling material one pass! To the tune of about 7 to 10 tons per hour. I have it set-up for sampling right now and have another chute for it that is strait. So if you wanted to place it under a Jaw Crusher then from the bottom of this to your tables. It has 1/4" screen in it right now. I do not have extra screens but they are not very much coin. You can put whatever size screen in it you want or recycle the material to take it down MUCH finer if you so desired? The engine is a Wisconsin 50 HP. The belt is a single serpentine. and yes it has a clutch! Just in case you over load it- I have not been able to yet! I am selling this one as my plans changed and now need a much bigger machine. I love the fact this is propane as it's cheaper than GAS! Also you do not have the varnish problems with propane like you do GAS. this baby will eat anything you want to put thru it! About the only thing I would not recommend is anything really sticky like TAR or something like that. But I bet it would eventually eat that too! The torsion bar axle has four bolts you could remove and drop it down on the skids like to be drug up to a remote location or something. the top opening is approx 8 inches by 18 inches. The b
Badger Bare Jaw Crusher 18x24 Cedar Rapids Motor~75 Horse 220 Volt 3 Phase soft start Only form of payment accepted will be PayPal. Payment due within 7 days of auction close. If payment is not received with 7 days seller reserves the right to cancel bid. Buyer is responsible for ALL shipping and freight costs. Shipping cost is estimated. Actual cost may vary. Buyer is responsible for all sales tax.
Keene gold dredge pump work great has strong compression. Ready to dig some gold from the earth. I bout this and don't know the laws for dredging in Cal so I'm selling it the fuel mix is 50:1 Posted with 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e913e76d6-0xfb-
Normal 0 Normal 0 Daewoo 220 LC-3 Excavator w/ Magnet& Shear Labounty Shear M odel M S 40 Shear S/N 40689 Price of Excavator is w/ Magnet& Shear W/O Magnet please cal l& Discuss Price! Stock# 10150 Location: Montana Call Us For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE ... moreUS WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
Kinergy Bin Discharge Vibrator KBA 10 HD 10 Foot bolt ring 10 hp 3 phase motor. We can load and ship if needed call for details. 219-670-2788 Thanks for looking! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e934f67df-0x104-
Gold Prospectors Portable Mining auger drill gold rush drilling test equipment GOLD CLAIM TEST DRILL STOP PROSPECTING BLINDLY. DRILL DRILL DRILL DRILL DRILL AS SAID ON GOLD RUSH TV. SAVE TIME AND MONEY.TEST FIRST, DONT DIG JUST ANYWHERE, DRILL DRILL DRILL AND THEN DRILL MORE. FIRST. THEN CHECK AUGER CUTTINGS FOR TEST SAMPLES OF GOLD ORE FOR THE BEST EXCAVATION LOCATION. FIND THE MINERALIZED AREA FIRST. THEN DIG THE PAYLOAD. AWESOME PORTABLE GOLD PROSPECTING TEST DRILL UNIT. OPERATIONAL WEIGHT 645 ... moreLBS. 8 INCH AUGER INCLUDED. DRILLING TEST DEPTH 10 FEET. ADD MORE TOOLING IF NEEDED, GASOLINE ENGINE AS IS. AS PICTURED IN LISTING. HEALTH ISSUES ENDING GOLD PROSPECTING BUSINESS FORCES EQUIPMENT LIQUIDATION. GOLD SAMPLES SHOWN NOT INCLUDED. SHIPS ON FLAT WOOD SKID. SHIPS U.S.A. ONLY dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e934f67cf-0xfd-
Normal 0 Normal 0 2007 JLG 339 4rt Rough Terrain Sci ssor Lift Only 884 Hours Platform Height 33' Ma x Platform H eight 39' 94" Wide Slide Out Deck Extension Diesel 4x4 Stock# 1014 6 Location: North West Regi on USA Call For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE ... moreUS WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
Up for sale is my personal desert fox gold panning machine/ gold wheel. Get every color you can! With gold currently selling for $1456.00 per ounce. You can't afford not to. It works well, I am only selling it because I do not have as many concentrates to run at once anymore and have time to pan it. This makes it a snap for doing higher volumes. Buyer pays actual shipping, sorry no returns. Happy bidding! Posted with
The model of the truck is CCC The engine is a Cummins 350hp There is less than 100 hours on the major The tires are 11r22.5- 90% is on the drives Call Ed for more information 414-403-0382
Normal 0 Normal 0 2001 JLG 600SC Track Driven Telescopic B o om Li ft 4459 Hours 66' Working Height 49' 6" Horizontal Reach Deutz Diesel Power 8' Platform Ste el Tracks 1000 Lb. Restricted Platform Capacity Ser viced& Work Ready! Stock# 1017 5 Location: Illinois Call For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING ... moreQUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
Normal 0 Normal 0 200 1 JLG 120SXJ Telescopic Boom Lift/ Manlift Reconditioned by JLG 2009 1300 Hours Work Height 126' D eutz Diesel SkyPower Foam Fill ed Tires 11' Articulated Jib 8' Platform Serviced& W ork Ready! Stock# 10170 Location: ILLINOIS Call For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. ... moreDIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ea248fe78-0x102-
I have 4 sale this vintage dynamite tag. This piece measures 20.5mm in diameter(around the size of a nickel) I combine items 2 save u money. I welcome my foreign customers on this piece. Thanks 4 Buying-It-Now! Jon On May-12-13 at 23:20:44 PDT. Seller added the following information:
ez screen 1000b with ez screen tilt trailer. Used but runs very well, one owner, serviced and greased regularly, tilt trailer has good tires and a winch brakes and lights all work as they should, its a great little screener and has lots of life left, we are expanding our topsoil business and buying a larger ez screen or we would keep running this well designed and well built machine
COAL MINE WORKERS AGREEMENT EFF 10-01-1935- 03-31-1937. UNITED MINE WORKERS OF AM. AND THE INTERNATIONAL UNION. CORNERS ARE BENT. NO TORN PAGES ALL ARE THERE. SOILED BY HARD WORKING MINERS HANDS. WORKING TIME. 78 CENTS/HR MACHINE MEN WITH W/EXCEPTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
This is a production made 8 inch Precision dredge with heavy duty equipment trailer. This is a complete dredge that was used for two seasons in fresh water on the 40 Mile River in interior Alaska before it went to into storage. The dredge has foam filled aluminum floats and a steel fame. It's a commercial grade mining machine way beyond the recreational machines of Keene and Proline. The rig includes the following: Ram's horn jet Jet flare(approximately 8 feet) Suction hose(approximately ... more16 feet) Suction nozzle with brake Sluice Box with a winch hoist system for the riffles. Box Size is approximate 9 feet by 3 feet. VW 1200cc air cooled engine(Approximtely 45 HP) with Alaska volcanic air filter Caterpillar equipment control panel for monitoring engine systems Precision PH2 Waterpump($1700 alone) Couplers. Pipes, clamps, etc. Hot water system- Exhaust heat exchanger type Exhaust extension Spud anchor to dredge frame. Msc. parts. Custom tandem axle tilt trailer. This dredge was stored away in perfect working order. But it has been sitting for a few years so it will need to be gone through to get everything tuned up and back in working order. It was stored indoors the majority of the time. There is surface rust on some of the components, but most can easily be wire brushed off. The engine was also in perfect running condition when stored, but is currently unknown from sitting, although it appears to turn when manually turning the pulley. It will at least need to gone through and tuned up. The trailer is a heavy duty unit with a hydraulic tilt for easy launch and recovery of the dredge. It also could use a going-through, but it pulled fine recently on a 50 mile trip to our property. The trailer has current CA registration. The dredge dimensions are approximately 8 feet wide and 16 feet long. It is also designed to be broken down into modular pieces for shipping to remote locations. The dredge currently has an on board fuel tank and air reservoir for diving, but it will need the hot water reservoir tank replac
This engine/pump was in a dredge package I purchased and don't really need it but I am tempted to keep it: Your actually biding buying on the keene p90 pump but motor is included. Pump works great and the seal doesn't appear to leak. Pumps water like crazy! 1" ID pressure side* engine is included* Now the details: 3.5 HP? Motor does run but has low compression Needs to be chocked and a little throttle to start Runs fine when warm NO Warrantee on engine Will be drained of fluids for ... moreshipping(YOU WILL NEED TO ADD OIL) A tune up and carb rebuild should fix it up. Engine is oily but will be cleaned up for shipping Tags: gold. Dredge, sluice, high banker, mining, high pressure pump, water pump.
Bought this 2.5" suction nozzle last year and now have went to a 4" dredge so don't need this. Pressure side is 1 1/4" threaded Normal scratches from use Tags: gold. Dredge, high banker, sluice
Used Miners Cap Lamp. Works. But also makes a nice collector's piece. Doesn't come with a charger.
this 5 gallon bucket uses a 200gph pump to suction small material through 3/4 inch hose. The material collects in the bucket while expelling only the water. the pump is mounted on the outside of the bucket to make carrying and using this equipment much easier. Pump runs on 12v battery and a small riding lawnmower battery works best for operation. And can also fit inside the bucket for easy travel and storage. The bucket comes with all hoses needed. However you will need to get your own battery. ... moreUse of this crevassing tool is permitted year- round, because it's size is under FISH and gold regs requirements for dredging. So there fore it is a crevassing tool, NOT a dredge, and can be used in the wetted perimeter year round.
Ingersoll-Rand ECM-590 Drifter Hammer Rock Drill Chuck Driver Plenty of life in this. Good Luck.
Ingersoll-Rand Yh-80 Hammer Drifter Rock Drill End Cap
You're bidding on a dry cell wheat light. It is MSHA approved. Will run for 20 hours when fully charged. Has the slide on head with the a miner PTO on the light. Come with the compatible charger.
MARATHON ELECTRIC MOTOR# VH254TTDR7240CNW HP: 1.9 Speeds: 2 Variable Torque Voltage: 200 Amps: 7.2 Shaft Length: 4 Shaft Diameter: 1 5/8 Key Width: 3/8 RPM: 875 Hours are 8:00 to 5:00 M-F There are no Returns on this item If You Would Like to Purchase More than One Lot or Have any Questions call 417-499-8240 If No Answer Leave a Message Will Get Back with You as Soon as I Can EM-2-3.
John Deere 450BJ Dozer Backhoe Attachment 6-Way Blade/ Cherry Picker Mounts Backhoe is removable JD style joysticks Digs 12-14 Feet GP Bucket 1/4 yard. Approx. Call Us for Details. or Inspection! Stock# 9030A Location: Montana Follow Us On Twitter! WSHEquipment Bidders must Call Prior to Bidding! Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. ... morePLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ebdb6858a-0x107-
1997 John Deere 690E LC Hydraulic Excavator 7.004 Hours Clean Tight& Dry Machine! Call for Details. Inspection! Stock# 9096B Location: No Rust Phoenix. Arizona Follow Us On Twitter! WSHEquipment Bidders must Call Prior to Bidding! Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER ... moreSEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ebdb685b9-0x107-
1994 5700-B Power Curber Nice Clean Machine! Stock# 9096 Location: Phoenix. Arizona Call For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS ... moreTHAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
Browning Gold Stone Mineral Mining Jaw Crusher The opening dimensions are 1-3/4" by 1-1/2" Item shown i n photo s are actual item for sale. Please refer to photos for details and condition. PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. Please do not bid if you payment is not followed through as it will be unfair for the other buyers and the seller. If payment is not received within the specified time. We reserve the right sell ... morethe item to a different buyer. SHIPPING: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to Ebay/Paypal policies. International Shipping: Import duties. Taxes, and surcharges are not included in the item price or shipping charges and are the buyer’s responsibility unless it is purchased through the Global Shipping Program. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos are included. Items in the photo(s) will supersede the written description should there is any discrepancy due to inadvertent description error. Please see all photos for details and condition. If an item is used. Please note that it will have the expected wear when purchasing used goods. All measurements are approximates. Items are sold in“as is” condition; and returns are not accepted, unless a serious and gross error was made in the listing. Normal 0 false false false EN-US X-NONE X-NONE
Hercules Powder Co blasting galvanometer with leather case. Posted with
You are bidding on a Completely Rebuilt Boom mounted Crust Breaker/ Pavement Breaker Model: 7030 Bore: 3 3/4" Piston Stroke: 5" Length: 27 1/2" Unit not Total) Shank Diameter: 2 3/8" Air Inlet: 1" Contact Seller for freight Quote
VINTAGE 1920 AD-HUGHSON-BACON CO-OAKLAND REBORING MACHI VINTAGE MEMORABILIA-VINTAGE ADVERTISING EARLY VINTAGE ORIGINAL COLLECTIBLE ITEMS ARE MY SPECIALTY TITLE: NICE- 1920 EARLY VINTAGE- HUGHSON-BACON COMPANY" OAKLAND. CALIFORNIA HUBACO-RE-BORING MACHINE SPECIFICATIONS ARE GIVEN ON MACHINE UNATTACHED-PERFECT FOR FRAMING VINTAGE: 1920 MADE BY: NOT GIVEN MEASURES: 5 1/2 X 8" PERFECT FOR FRAMING CONDITION- MINOR AGE WEAR-STILL CRISP-NO CREASES OR WRITING EDGES ARE FINE DESCRIPTION: THIS IS ... moreA NICE VINTAGE EARLY 1920 FULL PAGE ADVERTISEMENT-HUGHSON-BACON CO. OAKLAND, CALIFORNIA FOR HUBACO-RE-BORING MACHINE USED IN MINING. THIS IS IN NICE SHAPE WITH SOME WEAR AS SHOWN AND ALL IN TACT. THIS IS IN GOOD SHAPE AND COMES SEALED IN PLASTIC SLEEVE AND WILL SENT FIRST CLASS. TRIPLE SEALED. MAKE A NICE GIFT! I GUARANTEE WHAT I SELL-CUSTOMER SATISFACTION IS#1. ALL ITEMS SENT FIRST CLASS. TRIPLE-SEALED IN SCOTCH BUBBLE ENVELOPES AND WELL PROTECTED BID WITH CONFIDENCE WITH OVER 6800 POSITIVE FEEDBACKS- I SEND ALL OVER THE WORLD! ALL ITEMS SENT WITHIN 2-3 DAYS OF PAYMENT CHECK OUT MY EBAY STORE FOR OTHER VINTAGE PINS AND PAPER ITEMS PLEASE EMAIL IF ANY CONCERNS OF QUESTIONS? I ACCEPT PAYPAL AND OTHER FORMS OF PAYMENT MULTIPLE DISCOUNTS ARE AVAILABLE THANK YOU FOR YOUR BUSINESS-PLEASE SEND PAYMENT TO ROBERT FRASER PO BOX 644 HOLDEN. MAINE-04429 or paypal ALL ITEMS SENT FIRST CLASS-TRIPLE SEALED-EXTRA $1 ONLY FOR MULTIPLE ITEMS-LET ME KNOW IF YOU ARE BIDDING ON OTHER ITEMS AND I WILL COMBINE. I ACCEPT PAYPAL AND OTHER FORMS OF PAYMENT. YOUR BUSINESS IS APPRECIATED-PLEASE EMAIL IF ANY CONCERNS-WISH YOU WELL! gsrx_vers_421(GS 6.0.9(421)
Dredge is only 1 year old and has 2800 Hours. Comes with a Pipe Catch Attachment that is worth $21.000 and has never been opened. Specs below: Dredge Depth- 25 Ft Hull Length- 50' 15.2 Meters Overall Length with Ladder- 68' 20.7 Meters Hull Depth- 2' Overall Height- 10' Total Dry Weight- 56.000Lb Dredge is located in the SouthEastern US. Buyer would be responsible for shipping.
OK! to all you guys that have been watching this table for the past couple months. Here is your chance! This table was $12.000 new and it has about $1,500 in add ons. I have been asked to put this up for a real aucton to see were it goes. I dont know if I'm crazy for doing this but lets see what happens! Someone is going to be one lucky person. You know who you are so Happy bidding! It is a 2 foot x 4 foot High Frequency shaker table. It is variable speed with adjustable water jets. And fully ... moreadjustable table angels for all types of ore.It also comes with a Syntron variable speed feeder. It will accept dry or wet material. It does roughly 0.1 tons or 200lbs on hour of material/concentrates. It was intended for a 500 ton a day milling operation.It is fully operational. Just plug into 120 volt and a water supply. It has about 80 hours on it. As you can see in the photo it seperates gold from the black sands with ease.It is capable of seperating a variety of heavy metals. Works great for separating lead shot also. Local pick up or I can ship via freight quote.If your in the the Sacramento area I can deliver for a small fee. Please feel free to ask any questions!
This estate sale. Five inch, jetting gold dredge was built in 2009 and used for three summers. It works extremely well for fine gold recovery, floats high in the water and jets upriver to easily change location or go down the river fast! The dredge has a Proline pump and a single engine Honda GX270. A powerful engine with low fuel consumption, both were purchased new in 2009. The single sluice box makes a quick, easier cleanup and the slope of the sluice box is precisely adjustable to your site ... morerequirements. There is also a single air hose and regulator for diving, fish screen and a stiff leg for anchoring. The styrofoam float logs are wrapped in plywood so the dredge will float high in the water to clear rocks and avoid puncture leaks. The custom built trailer comes with a spare tire. The complete unit is stored in a heated, insulated shop. For technical questions call George 509-322-4258 or the owner Eva at 509-322-2385.
You are bidding on a Koehler l1 wheat light. This light has the led head an is in very good condition. Cord has no frays and the light is charged up. This light does not come with a charger. Posted with
Keene highbanker less than a year old. comes with GOLD HOG mat and a few extra's 1/4 plate. Miner moss, 25ft lay flat hose and if you dont want to highbank and going to a remote place I also have the part to turn it in a sluice also comes with the highbanker. Everything new plus tax would cost $700+.
WATCH FOB HOLMES LIMESTONE BERLIN. OHIO Size: 1 3/8' x 1 1/2' Condition: See photo's Contact me with any?s
Caterpillar front end loader 922b 4 wd rear steer $500 down via PayPal rest at pickup Thank you Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ee9979d70-0x101-
YOU ARE BIDDING ON TWO POLARIS NORTHERN LED MINING LIGHTS WITH ONE CHARGER. BOTH LIGHTS ARE IN VERY GOOD CONDITION AS WELL AS THE CHARGER. YOU GET EVERYTHING PICTURED. TWO LIGHTS AND ONE CHARGER. PLEASE EMAIL WITH ANY QUESTIONS. Posted with
JUSTRITE STREAMLINED" CARBIDE COAL MINER'S LIGHT- Antique This antique"Justrite Streamlined" Carbide Coal Miner's Light is in fairly good condition. It measures about 4"tall. It says on the bottom"United States of America" On the top Pat Pen. I bought this light for decoration for our family room back in about 1995. It has sit on the shelf every since. Great collectors piece. Buyer is responsible(see pictures) to determine condition. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ef62aeb7c-0x102-
I have 4 of these aluminum trench suports with the pump lightly used and everythings there will ship just have to be freighted and a crated up and discussed Posted with
Nice Blue Bowl Gold Concentrator Kit We used this kit one time to do about a gallon of black sand and it worked great.We are no longer mining so here it is up for sale.Comes with bowl.Hose,hose fittings,steel legs for bowl,pump,wires,and neg and pos clips for your battery.We also have the instructions for this unit. Please make sure this is what you need before bidding. Thanks lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13efaa3bb9b-0xfe-
Custom built gold highbanker sluice box. Used only one time up on the claim. Works excellent. Comes with everything you see on the unit. We used a 2 inch pump. It has a 16 inch wide sluice box with expanded steel grate and miners moss.There are two 48 x16 inch sluice boxes that bolt together.The frame is tube steel and very light. The hopper is welded steel with 1 1/2 pvc pipe for water flow. We have video of this highbanker working. It can be taken apart with ease. We prefer pickup only. Possible ... moreshipping but size will be at least 6x5x3.Weight is about 100 lbs give or take. Posted with e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13efc8b8b37-0xfa-
Portable Universal 30x42 Jaw Crushing Plant Used Universal 30x42 Jaw Crusher. Single toggle design, grease lubricated bearings, reversible manganese jaw plates are 70%+/ Crusher is powered by 150 HP electric motor. Mounted on an adjustable base with sheaves, bushings, v-belts& safety guards. Used 18’ vibrating grizzly feeder with welded, stress-relieved steel box, oil lubricated vibrating mechanism, grizzly section, powered by 30 HP electric motor. V-belts and safety guard. Grizzly fines are ... morebypassed via an under-grizzly chute which directs fines to the under crusher belt. Mounted in an 8’ wide steel hopper. 36” under crusher front discharge conveyor with impact idlers. Head& tail pulleys, 15 HP electric motor and conveyor belting. All mounted on a three-axle steel chassis fabricated from flange beam with rubber tires, mud flaps, steel fixed blocking stands and fifth wheel pin. The shipping process will begin once 100% of the funds are paid. I will ship this unit anywhere in the world within 2 weeks after the date I receive payment. This unit will be delivered by me personally. Terms: Item will be shipped when PayPal clears the funds. Shipping could be up to two weeks depending on where you are purchasing from. Bearing Temperatures Time Outer Bearing(Drive Side) Inner Bearing(Drive Side) Inner Bearing(Non-Drive Side) Outer Bearing(Non-Drive side) 9.00 77 77 77 77 9.15 78 78 78 77 9.30 84 86 82 83 9.45 94 93 90 92 10.00 98 95 95 97 10.15 108 101 101 104 10.30 108 100 100 104 10.45 103 100 100 103 11.00 103 101 101 103 Outside Temperature: Start- 77 degrees Outside Temperature: Finish- 79 degrees Coast down time: 1 min 48 sec. Notes(including type of oil. Quantity of oil added or removed) Posted with
97 renco new brakes new brake drums new suspension bushings More details you can call or text 210 8542575 Posted with
This trommel was built by owner's ex-partner and was built for serious gold recovery. I lost my partner due to health issues and used the trommel by myself. I was able to run apx 1 1/2 tons of material per hour; with your addition of a belt feed. This could be increased to maybe 3 tons of material per hour. This trommel will produce. I worked on Rich Hill Weaver Creek area and did very well. I was leasing a claim and it was sold under me. I am only selling because of another project I am working ... moreon with another gentleman. When purchased, all you need is gas/oil/water. I am setting you up for success. This is a gold producer. Please, only serious inquiries. SPECS: Trommel is mounted on a 4' x 8' trailer with extra tire. And room for the generator. Drum is 20" diameter by 63" long. Large spray bar. Belt drive with extra parts. Simer pump, 5 1/2 hp(same as Honda pump. Industrial Duty Fractional Motor 1/3 hp, 1750 rpm, 115/230. Sluice: 5 1/2 ft x 14 3/4 in wide, commerical grade miners moss, heavy duy Alaska commercial expanded metal. Chrome plated punch plate for tailings separation for water recovery. 500 gallon water system with two inserted screens. Generator: Coleman Powermate Pulse Plus 1750. Trommel water intake is optional for 1 1/2" or 2" 750 gallon water tanks for hauling water. PAYMENT/SHIPPING: Pick-up of the item is most preferred. And I will then be able to show you its operation and set-up. Second best is to meet me halfway; I will, at no charge, meet you up to 400 miles from my zipcode of 85332, in which case you too would be driving 400 miles. Shipping via freight is not an option, as the equipment is too heavy. Most payment methods are accepted: Paypal, money order, cashier's check or personal chec; payment must clear before pick-up. Email if you have any more questions, thanks for looking!
1926 COPPER PROPERTY- BINGHAM CANYON SALT LAKE CITY UT This is an unused postcard titled"Utah Copper Property. Bingham Canyon, near Salt Lake City, Utah. Someone has written"1926 trip" on the back. This postcard is in very good condition with wear to the edges and corners. view my other auctions below: visit my entire auction
Erics Equipment Sales is proud to offer this 1997 Teledyne PRINCETON D5000 W/TRAILER. This 1997 Teledyne Princeton D5000 truck mounted forklift. Very low hours 1079. Kubota engine.Hydrastat. 3 WD. Excellent machine. 2000 Dorsey flatbed trailer 96 x 48. Wood deck, sliding rear axle. Trailer is set up to carry forklift.OUR GUARANTEE TO YOU, IF YOU COME PICK UP YOUR EQUIPMENT AND YOU FEEL IT IS MISREPRESENTED FOR ANY REASON, YOUR DEPOSIT WILL BE REFUNDED NO QUESTIONS ASKED. We do have this item for ... moreSale locally and Reserve the Right to End this Auction at anytime. We will Be happy to Store the Winners item until pickup can be arranged. We will assist with Shipping Worldwide. Buyer is responsible for all Shipping Costs CALL TODAY 240 277 7777
Keene Engineering A52p backpack Sluice! Hard to find! Rated#1 This is a complete package with carry bag. Has the newest design riffles that grab gold and will not let it go! I used this 2 times on a trip out west. Had great success! Time to pass it on. buyer pays within 24hrs of auction close! Paypal Only! Thank you& happy bidding!
PLEASE READ ALL SHIPPING INSTRUCTIONS BEFORE BIDDING! Item Description: Old Mining tool made by"Iron City" Good ID mark/logo stamped in metal. Tool is 13" in length and marked on top"Little Digger" 5& 1/4" pick/spike on one end the other end is 2" wide beveled cutter. You are buying the tool/head only. Does NOT come with a handle. Has wear. Scuffs and scratches with some small dings as is the norm for old used tools. Some surface rust/rust and pitting. Overall ... morein good condition. Add a handle an it is ready to use or add to your collection. Photo of all side for condition viewing. Shipping based on ship to zip code& weight. Ship weight is 2.75lbs from zip code 38257. PLEASE E-MAIL ANY QUESTIONS BEFORE BIDDING! TENNESSEE RESIDENTS MUST PAY 9.75% STATE SALES TAX or provide a tax. Exempt tax# NO EXCEPTIONS" Item"will not" ship until taxes are paid! PLEASE READ* SHIPPING INSTRUCTIONS/POLICY AS FOLLOWS* ALL ITEMS SHIP BY USPS PARCEL POST UNLESS OTHERWISE REQUESTED. ITEMS SHIP THE NEXT BUSINESS DAY AFTER PAYMENT IS RECEIVED. DELIVERY BY USPS PARCEL CAN TAKE UP TO 10 BUSINESS DAYS OR LONGER TO DELIVER DEPENDING UPON LOCATION. BUSINESS DAYS ARE MONDAY THROUGH FRIDAY. IF YOU PREFER A FASTER METHOD OF DELIVERY I WILL SHIP BY PRIORITY MAIL WITH THE EXTRA EXPENSE/ COST TO THE BUYER. EMAIL FOR PRIORITY QUOTE BEFORE MAKING PAYMENT. PAYMENT METHODS ACCEPTED- PAYPAL! Email for other payment options! INTERNATIONAL BUYERS ARE WELCOME. INTERNATIONAL SHIPPING QUOTES AFTER COMPLETED AUCTION. ALL INTERNATIONAL TRANSACTIONS MUST BE PAID FOR BY PAYPAL. ALL FEES. TARIFFS AN OR TAXES INCURRED/ DUE TO INTERNATIONAL SHIPPING ARE THE SOLE RESPONSIBILITY OF THE BUYER. NO EXCEPTIONS. I ONLY ACCEPT PAYPAL FROM INTERNATIONAL BUYERS. IF YOU DO NOT UNDERSTAND THESE SHIPPING TERMS PLEASE CONTACT ME BEFORE BIDDING. U.S. buyers to pay shipping!
Slightly worn 9.5 redwing work boots. Look at pics Posted with
Special Offer* 1993 Failing F-6 Drill Rig. Designed for auger drilling for the expanding monitoring well market, suitable for foundation investigation, soil sampling, rock coring as well as water well production. 1993 Failing(Gefco) F-6 Drill Rig. S/N: 907273 Top Head Drive Drill Rig Note: Set up for Mud Rotary Drilling. Air Drilling with Portable Air Compressor connected, also designed for Auger drilling, and high 6 speed transmission Coring. Note: Drill is designed for auger drilling for the expanding ... moremonitoring well market. Suitable for foundation investigation, soil sampling, rock coring as well as water well production. Cummins 6BT Diesel Deck Engine Auger Racks. 3L-6 Moyno Pumo. 300 Gallon Water Tank. 4 Winches(7.000 lbs& 5,000 lbs, and Sandline) CAT Head. 30.000 lbs of Capacity, 4 hydraulic leveling jacks. Mounted on a 1994 Ford FT900 Truck. Cummins 8.3L Diesel Engine. 8 Speed Road Ranger Transmission. 12K Front and 34K Rear Axles. Air Brakes. Miles Read: 81.763 and Tow Winch VIN# 1FDYL90E3RVA14254 T/A. Dsl, 35' L x 12' H. 8'6" W, 28,000 lbs FOB: Mifflinburg. Pennsylvania USA but we can deliver anywhere in the world, just contact us for inland and/or ocean shipping quotes. We were asking $63.500.00 USD but are looking to move this quickly, machine is in good working condition and available for inspection any time. Contact us with any questions or for shipping quote. Thank you for your interest. And good luck bidding!
Cat 824B Wheel Dozer w/ 6- Way Blade Same as Cat 988A Wheel Loader Dom: 1978 Semi U Blade/ 6- Way Double Tilt = 2 Tilts Forward& Back = 2 Face of Blade Tilts Up& Down = 2 Weight Approx: 80.000 Lbs. Same as 988A Wheel Loader Nice Rare Machine Good Price for $$ Has Brakes. Runs& Starts up Good! Call for Questions or Inspections! Stock# 10106 Location: North West USA Call For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 ... moreTERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING QUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
1997 Bell Articulated Haul Truck. S/N BAT3420/97 29.5 X 25 Tires. Recent Brake Job. Mercedez Engine. Allison Automatic. Engine Brake 7.767 Actual Hours. One Owner Machine. Great running truck that is job ready. Machine is for sale locally so listing may end early. If you have questions call me before you bid. My phone number is 406-750-1948. Payment must be in certified funds and must be received prior to shipment. Buyer is responsible for all shipping costs.Seller will prepare the machine for shipping ... morewith the buyers carrier. No warranties expressed or implied. No returns. Will consider possible trade for later model crushing equipment of equal value.
Northern Light Polaris Cap Light Coal Mine Led Cordless IF YOU NEED IT IN A HURRY DO THE BUY IT NOW AND I WILL SHIP IT RIGHT OUT PRIORITY coal mining light cordless MSHA APPROVED Check out my other items! ALL OUR LISTINGS ARE 100% SATISFACTION GUARANTEED SORRY NO INTERNATIONAL SHIPPING
You are bidding on an Air Mover/ Air Horn by Texas Pneumatic. Model: TX10AM. Overall Height: Approximately 43" Diameter of Base: Approximately 16" Diameter-Top of Horn: Approximately 16"
First addition of relic quest. 511 pages of top notch tips for all your metal detecting needs. If you are a newbie to the game or a seasoned detecter this is a must have book Posted with
First addition 1959 California's mother lode by mary edith crosley. Look all you want you can't find this book! Posted with
1973 gost towns of the old west magazine. Find all the gost towns that they don't publish in new books. You wont find this magazine anywhere! Posted with
First addition 1962 covers all the gold bearing rivers on California. Book covers alamo. Amargosa, American, bear, big, calaveras, carmel, carson, chowchilla, Colorado, cosumnes. Cuyama, eal, elk, fall, feather, fresno,garcia, Guadalupe, gualala, keweah, kerm. Kings, klamath, los Angeles, lost, mad, mattole, mcclod. Merced, middle, mojave, mokelumne, nacimiento, mapa, navarro, new, noyo, old, otay, owens. Pajaro, pit, rubicon, russian, Sacramento salinas, salmon, san antonio, san benito, san diego, ... moresan gabriel, san gorgonio, san jacinto, san joaquin. San lorenzo, san luis ray, santa ana, santa clera. Santa Margarita, santa ymez, scott, shasta. Sisquoc, smith, stanislaus, sur, suasn, sweetwater, ten mile, tia juana, trinity, truckee, tule, tuolumne, van duzen ventura, walker,whitewater, yuba. Posted with
18 issues of modern gold miner and treasure hunter magazines. October 1988. November/December. 1989, may/June 1989, july/August 1980, March/April. 1989, November/ December 1989, September/ October 1989 January/ February 1989, February 1992 june 1991, August 1991, April 1991,April 1990, October 1990, may/june 1990 April 1990, January/ February 1990, August. 1990. All in good shape Posted with
15 rock& gem gold hunters magazines. January 1989. July 1996, January 1996 March 1996, July 1997, January 1998, August 1999, January 1999, January 2000, july 2000, july 2001, January 2003.all in good shape Posted with
43 issues of modern gold miner& treasure magazines. October 1992. April 1992, August 1992, February 1993, August 1993, October 1993, June 1993, December 1993, December 1994, April 1994, june 1994, February 1994, August 1994, October. 1994, June 1995, April 1995, February 1995, October 1995, August 1995, December 1995, October 1996, December 1996, may/june 1996, February 1996, April 1996, August 1996, February 1996, February 1997, April 1997, june 1997, October 1997, August 1997, February 1998, ... moreApril 1998, December 1998, June 1998, August 1998, October 1998, April 1999, February 1999, june1999. All are in great shape Posted with
1996 HITACHI EX 150 HYDRAULIC EXCAVATOR WITH 10324 HOURS IN GOOD WORKING CONDITION. METER READS 324. CALL GARY 480-694-9479 AND THANKS FOR LOOKING. ITEM LOCATION: NORTH DAKOTA CALL GARY FOR ANY INFO 480-694-9479 UNIT IS SUBJECT TO PRIOR SALE AND IS SOLD"AS IS WHERE IS" OUR EBAY FEEDBACK SPEAKS FOR ITSELF. ANY QUESTIONS. CALL GARY AT 480-694-9479 OR EMAIL ME. YOUR QUESTIONS ARE IMPORTANT. BUYER RESPONSIBLE FOR THEIR LOCAL SALES TAX.
USED IN GREAT. WORKING CONDITION POLARIS NORTHERN LIGHTS HARD HAT CORDLESS LIGHT AND SINGLE UNIT CHARGER MSHA The Northern Light Polaris All-In-One. Cordless cap lamp is an ultra-bright LED headpiece only with optics designed specifically for the mining environment. The primary LED lamp produces 3500 Lux output from a compact, lightweight lithium ion battery. A secondary LED light source is ideal for close-up viewing needs. Cordless and Durable The high capacity lithium Ion battery and LED light ... moreare housed in a single, impact, dust and water resistant plastic enclosure. The Polaris can be mounted on any mining or construction hard hat with a fixed or adjustable clip. Headbands, lanyards, neckstraps and magnet mounts are also available. All-In-One Cordless Polaris Cap Lamp benefits include: No Cords Weighs only 6 ouncesPre-set Beam 3,500 Lux light outputLED primary& secondaryLithium Ion batteryDischarge time 12 hrsLowest cost of ownership– no bulb replacement necessaryCar charger availableCharging System:Optimizes the life of Li-Ion batteriesSizes: Single unit. 24-unit and 48-unit rackAvailable in 120 volt and 220 volt12V DC model for vehicle connection
1-1/2 inch backpacker COMBO Dredge/Highbanker. With Homelite AP125 2 stroke pump@ 1860gph. Comes with dredge suction nozzle and head-in to classifier/grizzly box and also the highbanker head giving your 2 pieces of equipment in 1. Attach pump hose to highbanker plumbing and shovel into the hopper or attach to suction nozzle and suck material right out of the stream and into the hopper. These combo models are getting hard to find in a backpack unit. Highbanker plumbing also has a short spray hose ... moreand valve for easy cleanup. Comes with extra lay flat hoses for working farther out of wetted perimeter. Pump attaches to frame and hoses coil up and bungee on to backback. Tuck in a gold pan so all you carry is a shovel and a bucket! Would be easy to add floats or even strap to a tube to make a floating stream dredge. Good little gold getter for getting into tight spots or out of the way locations. Works perfectly! Ships to USA only as it is a larger item. Edit to add BIN and pictures of it in action.one of dredge mode.one of highbanker mode.and one of everything included(except wiffle bat that is used for scale)
Normal 0 Normal 0 200 1 Genie S-120 Telescopic Boom Lift/ M anlift 6349 Hours Cummins 4 Cyl. Diesel Max Working Height 126' Power to Plat form Platform H eight 120' E xtendable Axles Foam Filled Tires 8' Basket Drive System 4x4 Stock# 101 3 3 Location: Texas Call For Inspection! Follow Us On Twitter! WSHEquipment Call for Questions or Inspections please contact Greg@ 602-299-8766 TERMS OF SALE& NOTIFICATION TO BIDDERS WE CAN PROVIDE BUYERS WITH THE MOST COMPETITIVE RATE/SHIPPING ... moreQUOTES. DIRECTLY FROM CARRIERS. PLEASE PROVIDE US WITH YOUR CITY, STATE& ZIP CODE. OVER SEAS QUOTES CAN TAKES SEVERAL DAYS DUE TO LOGISTICS OF LAND& OCEAN PORT DESTINATIONS. ALL ITEMS THAT WE SELL ARE PRIVATE CONSIGNMENTS. DEALER CONSIGNMENTS, TRADE-INS, REPOSSESSIONS, OR DIRECT PURCHASES. WE ONLY ACCEPT DEPOSITS MADE VIA PAYPAL NOT TO EXCEED $500.00. THE REMAINING BALANCE MUST BE PAID BY. MONEY ORDERS, OR BANK TO BANK WIRE TRANSFER OF FUNDS. OUT OF COUNTRY BUYERS MUST USE BANK WIRE TRANSFERS OR BANK CASH TRANSFERS AS MEANS OF PAYMENT. FEE AND TAX INFORMATION: ARIZONA BUYERS MUST PAY SALES TAX. ALL OTHER BUYERS ARE RESPONSIBLE FOR APPLICABLE TAXES IN YOUR STATE OR JURISDICTION. THE WINNING BIDDER/ BUYER MUST CONTACT US WITHIN 24 HOURS VIA E-MAIL OR PHONE. FOR INSTRUCTIONS AFTER THE AUCTION CLOSES TO MAKE THE ARRANGEMENT FOR FINAL PAYMENT. WE ARE ACTING ON BEHALF OF THE SELLER. AS THE CONSIGNOR FOR THIS ITEM AND WILL NOT BE HELD LIABLE FOR ANY ERRORS OR OMISSIONS IN THIS LISTING. WE DO URGE OUR CLIENTS TO SET UP AN INSPECTION PRIOR TO SALE. CONSIGNED ITEMS ARE SUBJECT TO LOCAL SALE. YOU MAY CONTACT US BY CALLING GREG@ 602-299-8766 OR GARY@480-694-9479 SALES MGR. PLEASE DO NOT BID IF YOU DO NOT INTEND TO BUY! FEEL FREE TO E-MAIL SELLER OR CALL WITH ANY QUESTIONS PRIOR TO BIDDING! Please see Description. gsrx_vers_308(GS 5.3.7(308) Posted with
Up for buy it now or best offer is a 1-1/2 inch BACK PACK POWER DREGDE. It has a Homelite 2 stoke engine and pump. Great for getting into good gold country where you have very little water. The SLUICE box is 6-1/2 ins wide x 32 ins long. With miners moss and ribbed carpet. All the hoses have been replaced. The pick up hose 2 years ago and the other 2 are brand new. Brand new fuel lines and the carb is rebulit this year, ready to go to work. I made a attachment that gos on the box with 4 small screws ... moreand it becomes a MINI HIGH BANKER, might not look like a pro job but works very well.see pics) I bought this in 1995 and found nice gold with it for a few years, now it is time to give it up. Comes with original owners manual and parts manual. Every thing fits on the back pack and you head to the hills. Weights about 35 LBS. I accept pay pal as payment for winning bid. Thanks for looking. SHIPPING TO USA ONLY. PLEASE PAY WITH IN 3 DAYS OF WINNING BID. THE FASTER I RECEIVE PAYMENT THE FASTER I CAN SHIP. PLEASE TAKE A LOOK AT MY OTHER LISTINGS. I do combine shipping. E-mail for details
30ft end dump with barn door newer floor newer brakes ribbed floor heavy duty landing gear(can be loaded without truck under it) newer cylinder and tarp not installed but in new shape. Posted with
jaw. Roll crusher, and screener in one unit, cat diesel, was working before we moved it last year. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f61c7c771-0xfd-
2003 KOMATSU PC 228 USLC-3 EXCAVATOR. 42" ESCO BUCKET, A/C, RADIO, AUX. HYDRAULICS WITH CASE DRAIN(FOR USE WITH AUGER OR SHEETING HAMMER) 5600 HOURS, ORIGINAL OWNER, NEW SPROCKETS AND IDLER ASSEMBLIES, MACHINE TRAVELS AND OPERATES AS IT SHOULD WITH NO KNOWN PROBLEMS,MINOR COSMETIC DAMAGE TO DOORS AND CAB, LOCAL EQUIPMENT DEALER OFFERED $40K FOR THIS MACHINE ON A TRADE SO I SET THE RESERVE AT $50K, OTHERWISE I WILL JUST TRADE IT IN WITH NO HEADACHES. $1,000 DEPOSIT WITHIN 3 DAYS OF AUCTION END ... moreAND BALANCE DUE WITHIN 10 DAYS OF AUCTION END, MACHINE ALSO NEEDS TO BE REMOVED FROM PROPOERTY WITHIN 10 DAYS AFTER FINAL PAYMENT IS RECEIVED. NO WARRENTIES OR REFUNDS, MACHINE IS SOLD AS IS, WHERE IS. MACHINE IS LOCATED IN FARMINGDALE NY, 11735. CALL 631 390 8882 BETWEEN 8AM AND 5 PM M-F TO SCHEDULE AN APPOINTMENT. LOCAL PICK UP ONLY
Gilson Shaker Screen- Porta-Screen PS-3. Comes with 5 trays. 1" 3/4" 1/2" 3/8" 4. Digital display. Power up tested. Used very little. Sells new for $3700.00 + tax& freight. Local pickup near Sacramento Ca. or ground freight to lower 48 only. Freight will be cost + crate& handling fee of $40.00. Please email& I will get a freight quote for you. Below are specs from the Gilson web site PS-3 Gilson Porta-Screens ®• Counterbalanced mechanism for smooth operation. ... morePortable and easy to relocate for mobile applications. Easy to handle smaller screens. Gilson's Porta-Screen ® has long been the accepted standard portable screen for quality control of construction aggregates at asphalt and ready-mix plants. Porta-Screen ® models are designed for performance durability. Yet are light enough to be portable. Designed for best separation in the 2in(50.8mm) to No.16(1.18mm) range, it is often used to sieve materials to No.200(75µm) Porta-Screens are also useful for separations of many other materials. Capacity depends on test material characteristics but may range up to 60lb(27.3kg) per test. PS-3 holds five screen trays and pan. PS-4 holds seven trays and pan to permit two added mesh sizes per test. Vibration of both models is mechanically counterbalanced for smooth, stable operation; no mounting is required. A built-in UL-approved timer has LED display of remaining test time and issues a 5 second audible alarm at zero. Timer resets to repeat times which can be programmed up to 99 minutes, 59 seconds. A feature allows interruptions without loss of test time. Five or Seven Coarse Series Screen Trays are included with each PS-3 or PS-4 respectively. Trays have 14x14in(356x356mm) screen area and are quickly secured for operation by dual hand clamp levers. When levers are released. Trays are individually-removable for convenient emptying, cleaning, and weighing operations. Mesh sizes No.4 and larger have metal shields around edges to cover partial openings for accuracy of sep
Nicely painted metal gold digging mining pan. It is signed but I do not know who the artist is. It has some tape residue on the back that I am sure you can get off with a little work. The pan measures 10 1/2" across. The pan show some wear as you can see. But painting is very nice and show little to no wear. Smoke-free home.
Book on Aetna Dynamite. By the Aetna Powder Co. of Chicago. Copyright by Aetna Powder Co. 1907. Everything you need to know about dynamite. Ask questions before bidding.