|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , China
We will do our best to help solve the problem. Austria ,Denmark ,Finland ,Greece ,Ireland ,GUERNSEY ,JERSEY ,Norway .
0 bids $10.00 Shipping
Condition: Used Location: Houston, United States
USED UNIT,PULLED FROM A WORKING SYSTEM.
0 bids Free Shipping
Condition: Used Location: Framingham, United States
Storage Systems. - Includes only what is shown. Power adapter included.
Buy It Now
$5.56 Shipping
Condition: Brand New Location: , China
PTFE is made up of Fluorine and Carbon atoms. The Fluorine atoms are just the right size to form a helical shield around the carbon atoms. Commonly known as - PTFE has a very low coefficient of friction.
Buy It Now
$4.50 Shipping
Condition: New Location: Fenton, United States
2 - Premium Quality 304 stainless steel tube M6x26mm throat nozzle for 3d printers with teflon inserts. Ex: You buy a roller and the separation pad was not replaced. The pad may be a remaining issue in your repair.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
1 ALLEN WRENCH PER ORDER NOT PER COUPLER. New Precision Aluminum Rigid Shaft Coupler6.35mm x 8mm.
0 bids Free Shipping
Condition: Used Location: Woodruff, United States
25IN25 EXTRUDER. MODEL: 25IN25. DATE MFG.: 3-01. S.O.NO.: 71491. TYPE: DSPW. SERIAL NO.: 17913.
Buy It Now
Free Shipping
Condition: Used Location: Palatine, United States
MAGUIRE ML VACUUM GENERATOR.
Buy It Now
Free Shipping
Condition: New Location: Ocala, United States
THE LARGE CERAMIC WIRE CONNECTERS ARE EQUIVALENT TO THE RED PLASTIC WIRE NUT. CERAMIC WIRE CONNECTERS, IDEAL TO CONNECT HEATERS AND OTHER DEVICES WHERE HIGH TEMPERATURE PROTECTION IS REQUIRED. TYPICAL USES INCLUDE APPLIANCES, HIGH POWERED LIGHTING FIXTURES, CEILING FANS, HEATERS, PLASTIC EXTRUSION-INJECTION MOLDING BARRELS AND SIMILAR HIGH TEMPERATURE APPLICATIONS.
0 bids Free Shipping
Condition: New Location: , China
Description:Made of phenolic material with mirror polishing that is smooth and durable. It provides high electrical insulating properties, heat resistance, toughness, ductility and good properties for long-term use.Designed with a female threaded brass insert hole as a durable fastener that can be screwed in to attach firmly and avoid it being moved or loose when applying it to the male thread.This cylinder hand knob has a glossy and non-slip surface that is comfortable to handle. It can be easily grip to assemble and disassemble by hand without any tools.The hand knobs are versatile. It can be used as a replacement part for mechanical equipment, furniture decorations, control levers, exercise equipment, and more.
Buy It Now
Free Shipping
Condition: New Location: Nashville, United States
As shown, new.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Precision Aluminum Flexible Shaft Coupler.5MM x 9.53MM / 5MM X 3/8" (Shaft Inputs)". Radial Beam. Clamp Type with set screws.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
1 ALLEN WRENCH PER ORDER NOT PER COUPLER. New Precision Aluminum Rigid Shaft Coupler8mm x 8mm.
Buy It Now
$30.00 Shipping
Condition: New Location: , China
And we wouldn't use your phone number for other purpose. We will be happy to resolve any issues you may have in a cordial and friendly manner. Otherwise deal is final. All products are quality checked.
0 bids Free Shipping
Condition: Used Location: Livingston, United States
ZSK-30 Screw Elements, different kind, price is for each, please contact for specifications and availability. The photo just shows some of them, we have many more!
0 bids Free Shipping
Condition: Used Location: Chandler, United States
3DT 44000-38 REV 3B Control Monitoring Board for 10031-37 TubeDyne Corona System. Condition is Used. Shipped with UPS Ground.
Buy It Now
Free Shipping
Condition: New Location: Brooklyn, United States
Easy to install and remove without tools, our umbrella screw for patio umbrella stands would be a nice selection for you. Plastic Thread Size: M8x40mm. Thread Pitch:1.25mm. YOU WILL GET.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
3D Printer Parts. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Compatible with most 3D printers currently out on the market.
Buy It Now
Free Shipping
Condition: New Location: Tulsa, United States
Height: 20 mm.
0 bids Free Shipping
Condition: Used Location: Robards, United States
Once you pull the strands through the tank you can readjust the tank closer to the nozzle.
0 bids Free Shipping
Condition: New Location: , China
Description:Ultra-solid ball knob with a Shiny finish, suitable for general application,such as lawn mowers, exercise equipment, machinery, valves, spigots, etc. Specifications:Product Name: Ball KnobMounting Type: Female ThreadThread Depth: About 23mm/ 0.9 inchMounting Thread Size: M10Spherical Diameter: 32mm/ 1.26 inchMaterial: Phenolic PlasticRim Style: Smooth Package Content:2 Pcs x Ball Knob.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Aluminum Flexible Shaft Coupler.6.35MM x 15.88MM / 1/4" x 5/8" (Shaft Inputs). No other accessories included. Radial Beam. Clamp Type with set screws. Max speed 5500rpm.
Buy It Now
Free Shipping
Condition: New – Open box Location: Madison, United States
Polyurethane Board for Models. MB-0600 Board Material. Key Properties Applications. Compressive Strength - ISO 604 - MPa - 15-20. Flexural strength - ISo 178 - MPa - 15-20. The material should be processed at a temperature of 20°C – 25°C.
Buy It Now
$2.69 Shipping
Condition: New Location: , China
Feature: 100% Brand new. High precision 3D printer throat, suitable for 3D printer using 1.75mm printing materials. Made of stainless steel, durable and compact. Material: Stainless steel Length: about 30mm/1.18" Screw thread: M6 Fit for filament size: 1.75mm Without Teflon tube Package list: 2 x Nozzle Throat for 3D printer Notice:.
0 bids $8.00 Shipping
Condition: New Location: North Chelmsford, United States
Buy It Now
Free Shipping
Condition: New Location: Nashville, United States
As shown, new.
Buy It Now
$5.95 Shipping
Condition: New Location: Fredericksburg, United States
It also fits the new Axiom printers. We use these in our own printers and they work very well on all of the materials we have tested. These nozzles are made for 6061 Aluminum.
Buy It Now
$3.39 Shipping
Condition: New Location: , China
Widely used in industrial machine tools, such as milling machine,lathes,grinders etc. Back Ripple Hand Wheel designed. 1x Hand Wheel. Scope: widely used in various machine tools. We will much appreciate it and try to improve our service.
Buy It Now
$5.56 Shipping
Condition: Brand New Location: , China
Model: ABS Sheet. It is heat-resistant, non-deformable, and has high impact toughness at low temperatures. It is also a hard, scratch-resistant and deformable-resistant material. Material: ABS.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Automatic Vacuum Grain Suction Machine Extractor. 1 Vacuum Feeding Machine Grey. Host Size (MM) 550 400 600. M otor 1.1KW/1.5HP, Carbon Brush Type. Net Weight of Main Engine (KG) 13. Transport Capacity(KG/H) 300.
Buy It Now
Free Shipping
Condition: New Location: , China
Application: This machine is widely used in the producing process of. Small size, durable, easy to install and operate.
0 bids Free Shipping
Condition: New Location: Sherwood, United States
1" MNPT riser, welded to body. Self-Lubricating, Ceramic Hybrid Ball Bearing 1/4" thru 1". Bearing type Includes(as pictured) 1/2" end fitting.
0 bids $22.00 Shipping
Condition: For parts or not working Location: Centerville, United States
Glasscraft Fiberglass Chopper parts I've had these parts for several years. I closed my fiberglass shop down four years ago and I'm cleaning out my garage I've come across this last little bit of my shop . One part is a tip of the chop gun itself the other two are the bottom of the air cylinders that take the filter all parts are used in sold as is.i have many other new and used parts please look at all my other auctions or ask me what you're looking for and please look at all my other glass craft items and if you're really interested please make me an offer for these items won't last long
0 bids Free Shipping
Condition: New Location: Collierville, United States
Brand new never used gutter roll forming machine. Includes everything needed to start making gutters. Schneider control system is very easy to use and has DRO and can cut gutters to any size. Please send a message or call/text [phone removed by eBay] with any questions. We have drawings of the profile of gutters as well.
Buy It Now
Free Shipping
Condition: New – Open box Location: Nashville, United States
New open box / factory surplus unit, compatibility is unknown.
0 bids Free Shipping
Condition: New Location: Dawsonville, United States
You are looking at a New Stratasys FDM Standard 92 / 92ci (1510cc) Product # 310-20400 Translucent. Everything included in the ad is shown in the pictures and listed in the accessories line unless otherwise stated.
0 bids Free Shipping
Condition: Used Location: Miami, United States
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
3D Printer Parts. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Compatible with most 3D printers currently out on the market.
0 bids Free Shipping
Condition: New Location: Costa Mesa, United States
Vacuum loaders are the simplest version of a ‘resin conveying system’ but they are not an integral part of a central conveying system. A pickup lance is inserted into the material source container and a length of flexible hose connects the lance to the loader.
Buy It Now
$15.00 Shipping
Condition: New Location: Elgin, United States
0 bids Free Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: , China
Descriptions: It is mainly used in the heating devices of plastic injection machine stuffing container. Reasonable structure, attractive appearance, stable performance, quick heating, fine insulation performance, high pressure resistant. Features: Rust resistant steel sheath, stainless steel clamp type lock-up, notched sleeve allows installation, flush with nozzle he, mica insulation.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Aluminum Flexible Shaft Coupler.8MM x 14MM (Shaft Inputs). No other accessories included. Radial Beam. Clamp Type with set screws. Max speed 5500rpm.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
It is ABS material which has low shrinkage rate and do perform testing. It is spooled well without. The standard size and and common working temperature make it a necessary gadget for 3D lover. - For 3D printing pen and used to draw 3D objects from the paper to real life.
0 bids Free Shipping
Condition: New Location: , China
Description:Ultra-solid ball knob with a Shiny finish, suitable for general application,such as lawn mowers, exercise equipment, machinery, valves, spigots, etc. Specifications:Product Name: Ball KnobMounting Type: Female ThreadThread Depth: About 22mm/ 0.87 inchMounting Thread Size: M8Spherical Diameter: 35mm/ 1.38 inchMaterial: ThermosetRim Style: Smooth Package Content:1Pcs x Red Ball Knob,1 Pcs x Black Ball Knob.
Buy It Now
$19.99 Shipping
Condition: New Location: Wilkes Barre, United States
Low cost Vacuum Forming Machine ready to make parts for you. This low cost machine is designed to use 8" x 12" thermoforming plastic sheets. This is a great super low cost starter machine designed to test and learn all about vacuum forming.
Buy It Now
Free Shipping
Condition: New Location: Miami, United States
(Forming Area 16 1/4 X 16 1/4). : 16 1/4" x 16 1/4"(that's the size of the forming area,where the holes are). I can also custom make different size, u p to 24" x 36". COLOR TONE ON THE BOX MAY VARY FROM PHOTO.
0 bids Free Shipping
Condition: New Location: 闵行区, China
Comaptible With Bambu 3D Printer. 1 led Light Strip. Lamp Quantity : 75. Light Coloe : White LED. Length :150cm ( you can cut ). Weight : 36g. All pictures are for illustration purpose only and Colours may vary slightly.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
1 ALLEN WRENCH PER ORDER NOT PER COUPLER. New Precision Aluminum Rigid Shaft Coupler5mm x 8mm.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
It is spooled well without. It is ABS material which has low shrinkage rate and do perform testing. The standard size and and common working temperature make it a necessary gadget for 3D lover. - For 3D printing pen and used to draw 3D objects from the paper to real life.
0 bids Free Shipping
Condition: New Location: , China
Description:Made of phenolic material with mirror polishing that is smooth and durable. It provides high electrical insulating properties, heat resistance, toughness, ductility and good properties for long-term use.Designed with a female threaded brass insert hole as a durable fastener that can be screwed in to attach firmly and avoid it being moved or loose when applying it to the male thread.This tapered hand knob has a glossy and non-slip surface that is comfortable to handle. It can be easily grip to assemble and disassemble by hand without any tools. The hand knobs are versatile. It can be used as a replacement part for mechanical equipment, furniture decorations, control levers, exercise equipment, and more.Product Specifications:Material: PhenolicFinish: Mirror PolishingColor: BlackShape: Tapered ConeFemale Thread Size: M12x1.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
1 ALLEN WRENCH PER ORDER NOT PER COUPLER. New Precision Aluminum Rigid Shaft Coupler5mm x 5mm.
Buy It Now
Free Shipping
Condition: New – Open box Location: Denver, United States
Renshape 5045 urethane closed cell foam for tooling, modeling, or signs. The 5045 grade foam machines to the finest surface finish and sharpest definition of all of the Renshape board grades. Rough Size - 12"x6"x9.5".
0 bids Free Shipping
Condition: Used Location: Scottsburg, United States
Thanks for looking. Message if any questions
0 bids Free Shipping
Condition: New Location: Tazewell, United States
Filabot Plastic Orange Colorant. Mixture Ratio 25:1. Bin Location 3L1.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Precision Heavy Duty Flexible Shaft Coupler. Clamp Type. Speed 9000RPM.
Buy It Now
$21.99 Shipping
Condition: New Location: Wilkes Barre, United States
Low cost Vacuum Forming Machine ready to make parts for you. This low cost machine is designed to use 12" x 12" thermoforming plastic sheets. This is a great super low cost starter machine designed to test and learn all about vacuum forming.
0 bids Free Shipping
Condition: Used Location: Shippensburg, United States
78 in x 36 in x 56 in. No other accessories not on the picture are included.
Buy It Now
$5.95 Shipping
Condition: New Location: Fredericksburg, United States
It also fits the new Axiom printers. We use these in our own printers and they work very well on all of the materials we have tested. This alloy rivals mild steel in strength.
0 bids Free Shipping
Condition: New Location: Fullerton, United States
Vacuum Forming Machine, #PlastPress, 110 volt: The most compact positive pressure machine on the market, the PlastPress assure greater accuracy in the forming process and lower noise compared to vacuum machines.
|
|
|
|
Star Automation TW-650FM STEC-311Mc Robot for use on an injection molding machine. Item can be seen and picked up in Waukegan IL
|
|
IMPORTANT* PLEASE READ ENTIRE DESCRIPTION* No Returns This is a 3D printer that I purchased and have only taken out of the box. Was hoping to use it for a project. But CNC cutting has taken off and do not have time to use. I felt that it was better to sell to someone who can use, than try and use it and possibly make a mistake. This printer has LED lights, and also comes with a NEW SPOOL of 3mm 3d Printer ABS Red 1LB Plastic Filament! Printer is boxed up and ready to ship out ASAP! Here is the original ad so you can see everything that the printer has and comes with. You are bidding on a completely assembled RepRap 3D Printer. It is fullyfunctional and has the correct firmware already installed in it's Gen6Electronics board. This printer WILL NEED calibration via software used(i.e.Pronterface. ... moreSlic3r, etc. These RepRap printers need much attention and areNOT plug and play. Please be aware of this before bidding as I will notguarantee your success at printing with it. I will guarantee that allelectronics and functional parts are working and it is a VERY clean build asyou can see in the pics. Everything is neat and zip tied. I added custom LEDlighting with a small switch. Everything runs off of one plug! Included is a small glass for bed covered in Kapton Tape with clips I have installed a BRAND NEW J hot end and nozzle which hasnever had filament through it. You will get exactly what you see in the pictures + a few feet of black ABS(3mm) filament to get you started. This printer originally sells for $799 assembled + shipping- here is your chance to get it for less PLUS A NEW SPOOL OF FILAMENT. See the manufactures specs below:Technical Specification: Machine size 400 mmx 200 mm x 320 mm• Build size 220 mm x 220 mm x 165 mm• Nozzle Diameter(mm) 0.35• Layer Thickness(mm) 0.2• Speed(mm/s) 60• Positionning Precision: 27 microns• Input Format: STL• Software: Pronterface•System Copatibility: Windows XP. Windows 7 and Vista• Power Supply: ATX. 450W• Weight(KG) 12 Features
|
|
|
Gala#7 pelletizer cutter with 15 hp ac motor. On a adjustable cart with a spring loaded v groove casters. Manual cutter(shaft) adjustment. Includes spring loaded hub mounting option. Motor runs great, very quiet. Both spring loaded cutter option and manual shaft adjustment mechanism work well. Will strap to skid and ship via commericial freight to your location. Or you can pick up at our location in Garrettsville Ohio 44231 Any questions please ask
|
|
|
in titles& description Name: Labotek Vacuum Loader. PGT 61- No control box, Ticket# 14881, Model: PGT61, Manufacturer: LABOTEK, Item located at: Morrisville. PA, Serial# 1800798, Condition: Used, Terms& Condition: As is where is, Description: 220 3 PH. 60 HZ, 1.37 KW Missing electrical cover No control box Ticket: 14881 Additional information will be posted as it becomes available. PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION Subject To Prior Sale | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
in titles& description Name: SELF DUMPING HOPPER, Ticket# 20856C, Size: 37" x 51" x 36" Manufacturer: Unknown, Item located at: Morrisville. PA, Condition: Used, Terms& Condition: As is where is, Description: Hopper Dims: 48" x 34" x 24" External Dims: 51" x 37" x 36" | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
USED WECHSEL POLYMER EXTRUDER PART NO. 496-945. TYPE 012FG-B50 WITH A BALDOR MOTOR, 3 HP, 14 AMP 1750 RPM. I'M AFRAID I KNOW LITTLE OF THIS MACHINE BUT LOOKS TO BE FAIRLY GOOD CONDITION BUT HAS NOT BEEN TESTED,SOLD AS IS. I'LL TRY TO ANSWER ANY QUESTIONS.
|
|
DESCRIPTION: Up for the auction is REPRAP MENDEL ASSEMBLED 3D PRINTER* AS IS FOR PROJECT Fully assembled RepRap Mendel 1 3D Printer. This is intended for hobbyists and those who are technically inclined. Not recommended for kids without geek parents. The project was started in 2010 but was not completed due to the lack of time. There are custom made electronics which does not fit the standard Reprap Mendel software. We also made custom extruder and our pulleys are aluminum instead of plastic. The heated bed is not installed on the printer. This RepRap Mendel is exclusively for the project. But not for immediate use, therefore it is sold AS IS NO RETURNS. DON'T MISS A CHANCE TO GET THIS REPRAP MENDEL 3D PRINTER- Bidders with 0 feedback please contact me before bidding. Or I will be forced ... moreto cancel your bid. SHIPPING: I ALWAYS USE LOWEST SHIPPING PRICES AVAILABLE AT THE POST OFFICE I will ship Worldwide. I always pack safely and I am quick to ship. The package is trackable of course. PAYMENT: PAYPAL preferred. Payment must be done in 3 days after auction ends. Non-paying bidders will be reported to Ebay. Thank you for looking. In case of any questions please don't hesitate to contact me. || please feel free to take a look at other items || || like the stuff I sell? add me to your favorite sellers || © 2011-2013 mechanical.animals Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
16" x 40" Witte Screener. Single Deck Description: 16" x 40" Witte Screener. Single Separation, 64" Infeed Height, 48" Discharge Height, 1 HP AC Motor, No Starter. Approximate Dimensions: 54" L x 24" W x 64" H. Stock#7708. Subject to prior sale. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ... moreNormal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is used machinery sold“As Is. There are no warranties of any kind. Bidder/Buyer assumes all risks. Is solely responsible for the safe use of this machine and agrees to fully indemnify Arlington. By bidding on this machine, you agree that if you are the successful bidder. The full Terms and Conditions on the following website will apply Buyer is responsible for setting up shipping
|
|
|
in titles& description Name: RANGER AUTOMATION PICK AND PLACE ROBOT SA-1000 S4/F, Ticket# 10426, Model: SA-1000 S4/F, Size: Y=35" Z=48" Z=11' Manufacturer: Ranger, Item located at: Morrisville. PA, Condition: Used, Terms& Condition: As is where is, Selling Price: $7125.00 Description: Ranger Robot Automation Systems. Inc. Model# SA-1000 S4/F. Y=35" Z=48" Z=11' Preliminary specifications subject to verification. Additional information will be posted as it becomes available. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
EMX STRIP HEATER- FABRICATOR 36" 500 WATTS- MUST SELL! DESCRIPTION: 36" 34" HEATING ELEMENT] STRIP HEATER MANUFACTURER: KIDDER MANUFACTURING CO MODEL: EMX-1 FEATURES: BENDS SHEET UP TO 1/2" THICK 36" 34" LONG HEATING ELEMENT] THERMOSTAT ON/OFF SWITCH PILOT LIGHT MAX TEMP- 450 DEGREES F VOLTAGE- 115 V WATTS- 500 W CONDITION: EXCELLENT- LIMITED USE- SEE PHOTOS SOLD AS IS- NO RETURNS
|
|
Reprap MK4 hot-end 0.4mm nozzle for 3mm diameter filament. Initially was purchased from ebay Repsnaper from Denmark. The thermistor has been replaced with the more precise and know 100K ohm EPCOS B57560G104F. The EPCOS B57560G104F is the most reprap recommended thermistor. It is first listed in the most used firmware. For example marlin has 2 tables for it for 4.7k pull resistor and 1k. Has also the best specs in terms of precision and feasibility. For it is not need to mess up with thermistor tables. The hot end have been used before refurbishing with original but bad thermistor. The hot end have printed approximately 300g-to 500g of plastic filament. The melting chamber is dimensioned for 3mm filament. My printer is adapted for 1.75 filament. Therefore I sell it. It has 40 w ceramic heater. ... moreThe PEEK thermic isolator works very well for temperatures below 250.It may work with 1.75 PTFE filament by using an PTFE linear tube all the way inside of the melting chamber.This adaptation will have perhaps a very low speed or malting rate because of the low thermal conductivity of the PTFE plastic.
|
|
|
Used- EDI 54" Wide Flex Lip Sheet Die. Type Ultraflex 40. Flexible upper lip, 5 zone, back center feed. ref# 40508012 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Sterlco Hot Oil Heater. Approximately 12 kW, single zone, with pump. ref# 40508003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Die Block ref# 40505019 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- EDI UltraFlow Co-Ex Die Block. Serial# 02-22806. ref# 40505017 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Nissui S Cutter Sprue Runner. Model SA-26. Approximately 4 1/2" diameter rotor, 3) 1" thick hook blades. 21" x 15 1/2" feed with hopper. Driven by a 3.7 kw(5 hp) 3/60/230/460 volt gearmotor, ratio 60 to 1. Frame mounted with casters. ref# 40501003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Nelmore Granulator. Model 1745. Pelican feed, bottom discharge. Driven by a 5 hp, 230/460 volt motor. Mounted on casters. ref# 40478003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Zenith Gear Pump. Carbon steel. Driven by a 2 hp, 180 volt DC gearmotor, ratio 26.4 to 1. Includes a 12' diameter x 19' deep 316 stainless steel tank, and a control panel with a Zenith ZE drive. Mounted on a carbon steel frame. ref# 40289009 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used-1) Set of(2) Cincinnati 35mm conical twin screws. Serial#T7382/48. ref# 40158084 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Unadyn Dehumidifier Dryer. Model DHD-4. Dual desiccant beds, 110-120 process cfm, 3/60/220 volt, 36 amp, 14.2 kva. Includes a control panel. ref# 40158081 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- RDN Traveling Saw. Model 2418. Approximate capacity 2" x 4" profile, 2" O.D. tubing. Driven by a 1 1/2 hp, 3/60/208-230/460 volt, 3450 rpm motor. ref# 40158065 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Motan Diagnostic Dryer. Model MDD100. 1/60/240 volt, 41.6 amp. Total heater load 6 kw, 80-100 psi air required. Mounted on casters. ref# 40158062 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Profile Embosser. 6" wide, 2 roll design. Each roll is 16" wide X 16" O.D. and patterned. Air actuated nipping. Includes operator control panel, chain drive with no motor. ref# 40158058 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13e5752a2aa-0xf1-
|
|
|
Used- 1) Set of 2 Cincinnati 80mm conical twin screws. ref# 40158041 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Betol 1.9' 50mm) Single Screw Extruder. Model BC50, approximate 24 to 1 L/D ratio. Electrically heated, air cooled 4 zone non-vented barrel. Water cooled feed throat with a hopper. Driven by an 18 hp(13.4 kw) 3/460/1560 rpm motor thru a reducer, ratio 14 to 1. Includes a control panel with Eurotherm digital controllers, and a Reliance Flex-Pak 3000 D-CV-S drive. ref# 40158032 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- RDN Vacuum Sizing Tank. Model 4D3V2T30, 304 stainless steel. 12" wide x 12" deep x 30' long. 5) sections with covers. Includes holding tank, heat exchangers and pumps. Mounted on a carbon steel frame with casters. Built 1997. ref# 40158030 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e5752a1cb-0xfc-
|
|
|
Used- AEC Whitlock Pneumatic Blower including receiver and dust collector bin. Model VTTV3.5. Serial#99D0724. Has 3-1/2 hp blower, 460 volt and 16" O.D. X 26" receiver. ref# 40158029 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Non-insulated Drying Hopper. Carbon steel. 48" diameter x 100" straight side x 31" coned bottom. 6" bottom outlet. Mounted on a stand. ref# 40158027 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Beringer 4.5' Hydraulic Screen Changer. Model 4UL, maximum 600 deg F and 6200 psi. Includes a 2 hp hydraulic power pack, stand with heat exchanger and panel. Built 1996. ref# 40158010 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- RDN Vacuum Sizing Tank. Model 4D1V2T12, stainless steel. 12" wide x 12" deep x 12' long. 2) sections with covers. Includes holding tank, heat exchanger and pumps. Mounted on a carbon steel frame with casters. ref# 40158004 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used: 42" Cloeren Model Epoch V Sheet Die. 001"030" lip opening range. 03 neutral opening, 36-39-RC tool steel, hard chrome plated.002-0025, five heat zones, 240 volt, 2002 vintage. REF: INVOICE# 7895 ref# 40094003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used: 55" Cloeren. Model Epoch V, Sheet Die. Equipped with AutoGauge 5 Push/Pull adjustable lip, 0-04" gap range, tool steel, 001 Electroless nickel plating, 5 zones, 240 volt, 1992 vintage, die. ref# 40094001 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e5752a297-0xfc-
|
|
|
Used- Cumberland 14" Strand Type Pelletizer. Size 14. 12 bolt on knife rotor. Rotor and pull rolls are driven by an approximate 15 hp vari-speed motor. Manual top pull roll. Mounted on a frame with casters. ref# 38385 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e5752a3b3-0x104-
|
|
|
Used- Egan Extrusion Coating/Casting Station. 54' Wide. Includes 24" diameter x 54" wide casting roll, cored for heating or cooling( no rotary union) Quick coupling for quick roll change. Roll is gear driven by approximate 5 hp DC motor but no SCR control. Includes operator control panel and tension control panel with(3) 42" wide rolls in load cell tension area. Also includes Mount Hope bow roll and air actuated pull roll assembly. ref# 37916 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Cumberland grinder. Carbon steel. 5 hp, 3/60/220/440 volt, 1150 rpm motor, cutting rotor 26" wide x 16" diameter, 6 fixed,carbon steel blades with stainless steel tips, no cover. ref# 33785 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Ball& Jewel Rotary Cutter. Carbon Steel. Belt driven by approximate 15 hp motor, 12" diameter x 21" long 6 blade rotor, open top, coned to 6" bottom outlet. Mounted on steel frame. ref# 33775 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Cumberland Granulator. Model 185GPAN-2KN. 7-1/2 hp, 3/60/230/460V 1750 TEFC. 3 knife rotor, 2 bed knives. ref# 30572 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- TEW Hopper-Dryer. Model THD-50, Carbon Steel. 50 kg Capacity, 3000 watt heater power. Includes a BMS vacuum loader with wand. Last used on a 2" extruder. ref# 25488000 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- L. Lunardon Unwind/Winder. Manual speed control. Driven by an approximate 1 hp gearmotor. ref# 25434018 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Cross Head Die Block. Last used on an approximate 2" extruder. ref# 25434003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Nelmore Granulator. Model RG1220M1. Approximately 12" diameter x 20" wide 3 bolt-on blade closed rotor, 2) bed knives. Manual hydraulic tilt back pelican style feed hopper, bottom discharge, no drawer. Approximately 1/4" diameter screen holes. Driven by a 20 hp, 3/60/460 volt, 1755 rpm motor. Sound dampening side panels. Mounted on casters ref# 24770001 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Drying Hopper. Carbon Steel. Approximate 46" diameter x 80" straight side x 25" cone. Top openings 6" 11" 6" center bottom outlet. Mounted on 4 carbon steel legs. ref# 24746000 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Eldan Recycling/ E. Laursens Rasper. Model R1400/4, Carbon Steel. 1) Single shaft with wedge mounted blades. Hydraulically driven. Includes a feed hopper, and stand. Designed for preparing for instance cables for granulation. Requires assembly. ref# 24445000 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Maier 47" Wide Nip Roll station. Model AP1200. 1) 6" diameter x 47" wide chrome roll, 1) 6" diameter x 47" wide rubber roll, pneumatically adjustable. Driven by a 6.9 kw, 3/50/380 volt, 1800 rpm motor with reducer. ref# 24384002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Maier Rewinder. Model WSN24-M4-2. 3 kw hydraulic power system with rewinding heads. Includes(2) 53' wide rewind stands. ref# 24384001 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e5752a3d7-0x102-
|
|
|
Used- Buss Ko-Kneader Hot Face Die. Carbon Steel. 7' diameter die face with approcximately 1/8' diameter holes. 9' overall diameter x 1-1/8' thick with(12) bolt hole mounting on 2-1/4' centers. ref# 23916012 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Conair Conomix blender. 2 color. Includes 2 vacuum supply hoppers into 1 mixing chamber, driven by a 1/6 hp motor. ref# 81463 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Conair Pelletizer. Model 106. 8" diameter x 6" wide approximate 48 blade helical rotor. Rubber and metal pull rolls, bottom discharge. Driven by a 5 HP, 3/60/230/460 Volt, 1740 RPM motor. Mounted on a carbon steel stand on casters. ref# 81438 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Welex 1200L cooler. Model 1200 HC, stainless steel construction, air purge seals, 20 hp 575 volt motor, serial number 4675, year 1987. ref# 81343 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Polysystem 20" single layer blown film die. Model 20" SLD. 6" opening. Unit mounted on an oscillating die cart with casters, driven by a 3/4 hp gearmotor. 60/480 volt. ref# 81332 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Lodige cooler. Model 1210, 42 cubic feet working capacity, 321 stainless steel. Carbon steel jacketed chamber 32" diameter x 96" straight side, rated approximately 75 psi at 230 deg F. 4" diameter shaft with 11 welded-on T blades. Openings: top(2) 10" 3) side access doors; end bottom outlet. Unit requies an approximate 40 hp motor. ref# 81267 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Sakas table saw. Model SP8. 24" diameter saw blade. Unit can accept up to 7" wide x 6" tall product. Saw driven by 5 hp motor. ref# 80352 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: AEC Whitlock WD series cabinet dryer. Model WD150Q. 3/60/460 volt, 150 cfm process air flow. 160-400 deg F temperature range, 4 hp blower. Mounted on casters. OAD 37" long x 37" wide x 79" tall. Approximate weight 750# ref# 80337 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: AEC Whitlock dryer. Model 150CL. 3/60/460 volt, 150 cfm process air flow, approximate 4 hp blower. Mounted on casters. OAD 37" long x 37" wide x 79" tall. Approximate weight 750# ref# 80336 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Novatec POD series drying system. Model POD-150B. Dual tank system driven by 1 hp, 1/60/230/460 volt, 3450 rpm motor. ref# 80284 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED- Novatec POD Series Drying System. Model POD-150B. Dual tank system driven by 1 HP, 1/60/230/460 Volt, 3450 RPM motor. ref# 80283 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Sano 8" single layer blown film die. Mounted on a fixed die cart. Mfg 1981. ref# 75871 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Shick 3600 pound scaling/receiving hopper. 70 cubic feet, stainless steel. 52" diameter x 60" straight side, coned top and bottom. Includes diverter valve, 12" outlet with butterfly valve, side lug mounts. ref# 74830 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Papenmeier High Intensity Mixer. Model TGAHK8. 0.28) Cubic feet, 8 liter capacity. 316 Stainless steel jacketed bowl 8-1/2" diameter x 10" deep. Hinged top cover with baffle and sight glass. 2 Tier blade, 4" outlet with a manual plug valve. Driven by a 3 kw(4 hp) 220/440 volt, 1700 rpm motor. ref# 74341 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Filmaster 10" single layer blown film IBC extrusion die. 070 gap. ref# 74063 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Sano 10" single layer blown film IBC die. 1.75" bore opening, 070 gap. ref# 74055 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Roots Positive Displacement Blower. Model 406RAM, carbon steel. 4' NPT inlet/outlet. Requires motor. ref# 90630 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Weima Shredder. Model WLH600S/30, Carbon Steel. Approximately 14-1/2' diameter x 23' wide 32 blade rotor, driven by a 30 kw(40hp) 3/60/460 volt, 1766 rpm motor. Horizontal feed with(2) metal feed rolls, driven by an approximate 1-1/2 hp gearmotor. Approximate 1-1/8' diameter screen holes. Unit set up for blower discharge. ref# 90618 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Prodex High Intensity Mixer. Model JSSD-115, 2.1 Cubic Feet Working Capacity, 2.6 Total, 316 Stainless Steel.Carbon steel jacketed bowl 18 1/2" diameter x 18" deep.Hinged top cover withdeflector style baffle.Side bottom outlet with plug valve.Bottom wagon wheel style mixing blade.Driven by a 14.8/17.9 HP, 3/60/440 Volt, 1740/3480 RPM motor.Mounted on a carbon steel base. Includes a control panel. ref# 90463 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Mitts& Merrill Twin Shaft Shredder. Model 1417, Carbon Steel. 2) rows of(7) intermeshing hook knives approximately 6" diameter x 5/8" thick. 14" x 17" feed opening with hopper, bottom discharge. Driven by a 10 hp, 3/60/230/460 volt, 1140 rpm gear motor. Mounted on a frame. ref# 90383 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Whitlock Desiccant Dryer. Model DB-600RTNX. 300 CFM, 3/60/460 volt, 57 amp, 26.2 KVA. Mounted on casters. ref# 90173 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- AEC Whitlock drying hopper. Model DH-75F-Q, carbon steel. Approximate 42" diameter x 80" straight side. Removable top, coned bottom. Mounted on 4 legs. ref# 89486 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Blackmer Sliding Vane Pump. Model XL1.5A, Ductile Cast Iron. 2-1/2" Inlet/outlet. Rated approximately 35 gallons per minute at 100 psi at 1750 rpm. Driven by a 5hp, 3/60/230/460 volt, 1735 rpm XP motor thru a Blackmer helical reducer, ratio 3.32:1. Mounted on a carbon steel base. ref# 89447 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Blackmer Sliding Vane Pump. Ductile Cast Iron. 2-1/2" Inlet/outlet. Rated approximately 35 gallons per minute at 100 psi at 1750 rpm. Driven by a 5hp, 3/60/230/460 volt, 1740 rpm XP motor thru a Blackmer helical reducer, ratio 3.32:1. Mounted on a carbon steel base. ref# 89439 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e5d149d0d-0x103-
|
|
|
Used- Egan 6" Single Screw Extruder. Model H6026D. Approximate 26:1 L/D ratio. Electrically heated, water cooled 8 zone non-vented barrel. Water cooled feed throat, no hopper. Includes a reducer, 710 HP rating at 1150 RPM, ratio 7.054:1. Requires motor and panel. ref# 85172 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e5dff3a6f-0x100-
|
|
|
Used- Henschel High Intensity Mixer Bowl Only. 500 Liter, Model 115 JSS, Stainless Steel. 36-1/2" Diameter x 31-1/2" deep. 10" Outlet. ref# 85069 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Vacuum Sizing Tank. 304 Stainless Steel. 7-3/4" wide x 7-1/2" deep x 144" long. Includes holding tank, heat exchanger, pumps and covers. Mounted on a carbon steel frame. ref# 85031 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Metaplast Vacuum Sizing Tank. Model MVSP14.3.7.5, 304 Stainless Steel. Dual sections, 1) 18" wide x 12" deep x 10' long, 1) 18" wide x 12" deep x 12' long. Includes holding tank, heat exchanger, pumps, filter and panel. Mounted on a carbon steel frame. ref# 85030 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- RDN Vacuum Sizing Tank. Model 4D-3V-2T-30, 304 Stainless Steel. 11-1/2" wide x 11-1/2" deep x 360" long. Includes holding tank, heat exchanger, pumps, filter and covers. Mounted on a carbon steel frame. ref# 85027 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- M A Industries Pellet Cooler. Model P7171001-0, Carbon Steel. 12" wide x 12' long perforated bottom screen. 6" top end inlet, 4" x 4" end bottom outlet with a 3 HP blower. Includes a top screen cover and a side mounted 15 HP, 3/60/230/460 Volt, 3520 RPM blower. ref# 84858 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13e5dff3a18-0xfd-
|
|
|
USED: Cincinnati Milacron Dryer. Model CDD-100. Temp range approximately 170 to 250 deg F. Air flow approximately 75 cfm. 3/60/460 volt, 14 amp. Includes an insulated hopper. Mounted on a frame with casters. ref# 84502 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Normag Gear Pump. Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/230/460 volt, 1760 rpm motor thru a Sew reducer, ratio 27.47:1. No controls. Last used on a 60mm twin screw extruder. ref# 84307 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Automated Assemblies Corp. Robot Arm. Model AX-40 W/E4. Last used picking parts from an injection molder. ref# 84305 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Henschel cooler. Model 115CM. 400 liter working capacity, 1050 liters total. Stainless steel, carbon steel jacketed bowl. 59" diameter x 23" deep. Single blade, 8" diameter outlet driven by a 20 hp motor, no reducer. ref# 84296 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e5dff3a18-0x104-
|
|
|
USED: Papenmeier High Intensity Mixer. Approximately 150 liter, 5 cubic foot, 316 stainless steel. Carbon steel jacketed bowl 22" diameter x 24" deep. Swing away top cover with baffle, 2 tier blade. Side bottom outlet with plug valve. Driven by an approximately 25 kw(33 hp) 3/50 hz motor. Mounted on an I-beam frame. ref# 84116 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e5dff3a40-0xf5-
|
|
|
USED: Waterbath. Stainless steel. 21" wide x 68" long x 11" deep. Mounted on a carbon steel frame with casters. ref# 84023 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Simplomatic vertical lab size injection molder. Model Hydro. Approximate 6 ton clamping system. Approximate 3/4 ounce shot. 220 volt, 1200 watt. 1" diameter tie bars, approximately 8" between. 1) Platen 7-3/4" x 5" high, 1) 11" x 5" high. Top feed, side discharge with parts pan. 5 hp hydraulic motor. ref# 83951 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Killian 8" Wide Cast Film Lab Chill Roll Stand. 1) 8" wide x 8" diameter chrome plated chill roll cored; 2) 5" diameter x 8" wide pull rolls. 1) rubber, 1) metal, pneumatically adjustable, driven by a 1/2 HP 180 Volt DC gearmotor with a Bronco drive. Unitized single turret wind driven by a 1/4 HP, 90 Volt, 1725 RPM DC gearmotor. Also includes(1) 6" wide vertical cast film die. Mounted on a carbon steel base on casters. ref# 83949 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: 6" Hydraulically operated slide plate. No hydraulic power unit. ref# 83943 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Chipper. 6" x 15" feed opening, segmented rotor with carbide tips, 15 hp 230/460 volt motor, feed hopper with magnets. ref# 83831 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Conair Dehumidifying Dryer. Model CD200H, 150 cfm. 4 Desiccant cartridges, rated 160-250 deg F, 3/60/480 volt. Includes Compudry control panel. Mounted on casters. ref# 83131 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e5dff3a50-0xf0-
|
|
|
USED: Boston Matthews Belt Puller. Model C650VT. 2) Manually adjustable belts, 4" wide x 24" long contact area. Driven by an approximate 1 hp gearmotor. Feet per minute min/max 9/195. Control panel incomplete. Base mounted. ref# 83128 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e5dff3a39-0xf5-
|
|
|
USED: Ball and Jewel Granulator. Model CG-812-SCSX. Approximate 8" diameter x 12" wide open rotor, requires 3 bolt-on blades, 2 bed knives. Tilt back pelican style feed hopper with approximate 1/16 hp paddle feed, bottom blower discharge, no blower. Approximate 1/4" diameter screen holes. Driven by a 7.5 hp, 3/60/230/460 volt, 1745 rpm motor. Mounted on casters. ref# 82989 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Conair insulated dry hopper. Model 18053804, approximate 215 cubic foot capacity, stainless steel. Carbon steel sheathing with insulation. 4) bolt together sections. 64" diameter x 147" straight side x 43" coned bottom. Side access door. 6" center bottom outlet. Mounted on a frame. ref# 82775 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Grinder. Approximately 14" diameter x 18" wide 3 bolt-on slanted blade open rotor, 2) bed knives. Tilt back pelican style feed hopper, bottom discharge drawer. Approximately 3/8" diameter screen holes. Driven by a 25 hp, 3/60/575 volt, 1750 rpm motor. Mounted on casters. ref# 82405 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: MPG Under the Press Granulator. Model UP735. 6" x 36" long feed with a tilting hopper, 2) feed rollers driven by a 1 hp motor. Approximate 36" wide closed rotor driven by a 10 hp, 3/60/208-230/460 volt, 1160 rpm motor. Set up for blower discharge with a 3 hp blower. Mounted on casters. ref# 82104 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Peachtree Tech Belt Puller. Model PFP01000. 2) Pneumatically adjustable foam belts, 1" wide x 12" long contact area. Driven by a 1/4 hp Servo motor. Includes control panel. Cabinet mounted. ref# 82051 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- EDI 52" Wide Sheet Die. 1" Back center feed. Includes restrictor bar. ref# 81843 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Prodex Torquemaster 6" Single Screw Extruder. Model TKM60D340-24. 24 To 1 L/D ratio. 5 Zone electrically heated, water cooled barrel, side vented 91" from feed openeing with a vacuum pump. Water cooled feed, no hopper. Approximate 52-1/4" centerline height. Driven by a 300hp, 550 volt, 1750 rpm DC motor thru a Lufkin reducer, 14.58 to 1 ratio. Includes a control panel with Barber-Cloman temperature controllers, and a 400 KVA transformer. ref# 81842 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Progressive Systems dual rip saw. Approximate 10' wide area. 2) 14" diameter blades, manually adjustable, each driven by a 10 hp, 3/60/230/460 volt, 1745 rpm motor. 44" table height. Mounted on casters. ref# 81590 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Sakas table saw. Model TS110. 3) upacting saws, approximate 10" diameter blades, under cut. Each driven by a 5 hp motor. ref# 81587 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: American Maplan approximate 40mm counter-rotating. Intermeshing twin screw extruder. 2) 1.5" diameter x 19" long screws. Electrically heated, air cooled 2 zone vented barrel. Water cooled feed throat, no hopper. Extruder driven by a 10 hp DC motor thru a reducer. Unitized control panel with Eurotherm controllers and a 45 kva transformer. Mounted on casters. ref# 81584 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- HPM 2-1/2" Single Screw Extruder. Model 2.5TMC-24, 24:1 L/D Ratio. Electrically heated, air cooled 4 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 40 HP, 640 Volt, 2500 RPM DC motor thru a gearbox, ratio 13.95 to 1, 108 hp rating. Approximate 42" centerline height. Unit includes a quick clamp die adapter, 7.5 KVA transformer, Powertec Brushless 2000 DC drive and control panel with Eurotherm 94 controllers. All unitized on a common carbon steel base. ref# 70708 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer. Model TD-360. CFM 360, 3/60/460 Volt, 55 Amp. Unit includes a Tech 3 automated intelligence control panel. ref# 85237 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e64f8fde8-0x102-
|
|
|
Used- Egan 3-1/2" Single Screw Extruder. Model H3518HD. Approximate 26:1 L/D ratio. Electrically heated, water cooled 6 zone non-vented barrel with heat exchanger, pump and tank. Water cooled feed throat, no hopper. Includes a reducer, 260 HP rating at 1150 RPM, ratio 7.67:1. Requires motor and panel. ref# 85173 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|