|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Mansfield, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Used on lots of old hit and miss engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made in the USA!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
1/8" NPT threads, 1" wide cap, 1" tall overall.
0 bids Free Shipping
Condition: For parts or not working Location: Shenandoah, United States
Antique International Harvester 10-20 Brass Carburetor. Sold for Parts or Rebuild or core. The center section swivels making the tube loose.
Buy It Now
$3.75 Shipping
Condition: New Location: Fayetteville, United States
Face stapled. 8 1/2" by 11". It covers the small 1 1/2 hp engines. alot of good information about all the parts, carb, timing, as well as the care, starting and operation of the engine. a great addition to any collection.
0 bids Free Shipping
Condition: New Location: Wilton, United States
Comb binding. 8 1/2 X 11" format, lay flat when open. New reproduction manual. Located on computer 1 file. Extensive parts lists.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! This will replace your broken or used muffler.
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
Snapper mowers 1981 and Forward Fuqua decal set For Briggs And Snapper 21” 8pc. Condition is New. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A nice looking solid brass with tee handle w/ bibb drain cock.
0 bids Free Shipping
Condition: New Location: Wilton, United States
I have a large database and have only listed a fraction of thus far. New reproduction of Owner Parts Manual, to be printed in black and white. 8 1/2 X 11" format. 1.5, 3, 6 horse power units. Comb binding.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Reprint instruction book for the Galloway engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made in the USA.
Buy It Now
Free Shipping
Condition: New Location: Rajkot Race Course Road S.O, India
Piston Rings only - Set DEV- 574-10970. Dev Precision Engineers. Lister CS CAST IRON PISTON ASSEMBLY COMPLETE WITH RING SET For 5/1 6/1 8/1 10/2 12/2 16/2 engines with 4.5" Bore. A standard cast iron piston ring set for use in Lister CS / India Listeroid type engines.
0 bids Free Shipping
Condition: New Location: , China
Part Number: A218020. Fit for Doosan Daewoo Forklift: G20E-3-CW, G20E-3-CX, G20E-3-DX, G20E-3-G9, G20E-3-GA, G25E-3-CW, G25E-3-CX, G25E-3-DX, G25E-3-G9, G25E-3-GA, G30E-3-CW, G30E-3-CX, G30E-3-DX, G30E-3-G9, G30E-3-GA, G32E-3-CW, G32E-3-CX, G32E-3-DX, G32E-3-G9, G32E-3-GA, G32E-3-GP, GC20E-3-CU, GC20E-3-CV, GC20E-3-DY, GC20E-3-JY, GC20E-3-JZ, GC25E-3-CU, GC25E-3-CV, GC25E-3-DY, GC25E-3-JY, GC25E-3-JZ, GC30E-3-CU, GC30E-3-CV, GC30E-3-DY, GC30E-3-JY, GC30E-3-JZ, GC32E-3-JY, GC32E-3-JZ.
0 bids Free Shipping
Condition: Used Location: Pleasant Hill, United States
Kubota V2203 DI or IDI 51 HP Engine - USED. Kubota V2203 DI. Right now we have (3)+/- Kubota V2203 Engines. 47-51 HP (4) Cylinder Diesel Engine. 4 Cylinder Diesel Engine. We need the old engine complete in order for our engine to work in the place of the V2203 and/or V2203M.
0 bids Free Shipping
Condition: New Location: Le Mars, United States
It will retain the flat shape if you roll it the opposite way when you get it.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
$4.25 Shipping
Condition: New Location: Fayetteville, United States
For sale is manual #384 the Root & VanDerVoort Triumph horizontal hit Miss Engine Instruction and Care Manual. Full 8 1/2"x 11". This is pre 1916 when they rerated the engines. Guess it includes all the Triumph line.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
0 bids Free Shipping
Condition: Used Location: Waldo, United States
This is a VERY hard to find Detroit Lubricator Model G 4-feed lubricator as used on several prairie tractors, engines, and other machinery. It will need a new glass disc over the gauge and also a new sight window.
0 bids Free Shipping
Condition: New Location: Livonia, United States
Buy It Now
$10.50 Shipping
Condition: New – Open box Location: Baldwin, United States
This is All New, Made Of Cast Iron, Poured In A foundry, Ready To Put On Your Engine & Run ! These are Made for a single Mounting Bolt Just as the Originals were, Approx 11" Over all Height, 3 1/4" wide where it fits into the Opening On the Back. 4 3/4" Outside Width At Base, 4 1/4" wide At The top part Of the curve.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
John Deere E Rocker Arm spring for the E 1-1/2 & 3 hp engine. Made to the original specs.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
V belt pulley to make an ice cream machine with a hit and miss enigne.
Buy It Now
$4.24 Shipping
Condition: New Location: Fayetteville, United States
I have a beautiful color reprint of the IHC Mogul oil tractor Catalog. It is 38 pages. Really nice color pics of the different tractors and engines for them as well as alot of specs and pics of each size.
0 bids $7.50 Shipping
Condition: Used Location: Lockridge, United States
Center to center bolt spacing is 1 3/4”. Brass I believe this will fit all 1HP famous/titan engines. This cap was specifically removed from a Aircooled atom thumb. See pictures for the absolute best description. 1HP IHC Famous Titan Tom Thumb Rod bearing cap Hit Miss Engine.
Buy It Now
Free Shipping
Condition: For parts or not working Location: Sherwood, United States
For your consideration is an original Associated or United rocker arm with bolt for a 1-3/4, 2, 2-1/4 and 2-1/2hp engine. It’s been repaired on the adjuster end and needs drilled/tapped to put in a bolt.
0 bids Free Shipping
Condition: Used Location: Punxsutawney, United States
VTG Essex Brass Corp Detroit MI Oiler.
0 bids $16.50 Shipping
Condition: New – Open box Location: Finksburg, United States
LB 1 1/2 TO 3 1/2 HP. CRAINKCASE BLOCK.
Buy It Now
Free Shipping
Condition: New Location: , China
See all condition definitionsopens in a new window or tab.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Exhaust bolt for the Briggs wm and wmb engines. Casting is for reference only, it is NOT included.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
$5.00 Shipping
Condition: New Location: Le Mars, United States
1/4" round leather belt for your engine cooling fans and governors. Price is per foot. Item #2740.
Buy It Now
$18.40 Shipping
Condition: Used Location: Omaha, United States
For sale is a used Briggs & Stratton Flywheel. all fins are intact.
Buy It Now
$12.00 Shipping
Condition: Used Location: Muscoda, United States
Four books relating to old hit miss gasoline engines. C.H.Wendel's Gas Engine Trademarks hardcover, Amanco, (Associated) engines, Gas Engine Restoration, Stationary Gasoline Engines. Two are as new, other two have slight handling wear as shown in pictures. 550+ pages total.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
This will fit a 2-1/2hp to 12hp engine but it is probably most correct for a 2-1/2hp to 6hp. There are no cracks, breaks, or welds I can see or know of. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: Used Location: Campbellsport, United States
I HAVE FOR YOUR CONSIDERATION A STEEL BODIED LOW TENSION IGNITION COIL. THIS IS MADE TO HOOK BETWEEN A BATTERY AND YOUR IGNITER ON YOUR ENGINE. THIS IS NOT FOR AN ENGINE WITH A MAGNETO. I HAVE TESTED THIS COIL AND RAN AN ENGINE WITH THIS COIL.
0 bids Free Shipping
Condition: Used Location: Seaford, United States
G. B. ESSEX Brass Cylinder Oiler No 3 Hit Miss Engine Steam Antique
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Brought to you by the oldest and largest dealer and Manufacturer of reproduction John Deere Engine parts in the country.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
1/2" course thread not pipe thread. Cup is longer than normal.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
You can choose to apply vinyl in one of two ways; dry or wet. Applying vinyl decals dry does not allow for any mistakes. However, applying vinyl decals with application spray allows you the opportunity to remove and reposition vinyl, as needed, for several minutes.
Buy It Now
Free Shipping
Condition: Used Location: Battle Creek, United States
Good used rocker arm, no cracks or welds. Thanks for looking
Buy It Now
Free Shipping
Condition: Used Location: Manteca, United States
0 bids Free Shipping
Condition: Used Location: Orient, United States
No. 1 Brass Grease Cup Hit Miss Gas Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back.
0 bids $12.50 Shipping
Condition: For parts or not working Location: Lockridge, United States
NONWORKING. Good glass. I believe one of the needle valves is incorrect to this Oiler. Will require some work.One of the locking nuts is stripped out as well. What you see is what I have. Thanks for looking.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
19 page long book showing a breakdown of the parts for a John Deere model E engine.
Buy It Now
$4.75 Shipping
Condition: New Location: Placerville, United States
Also found on many early outboard boat engines including Elto and Evinrude.
Buy It Now
Free Shipping
Condition: Used Location: Holgate, United States
The etching is deep and the letters and such are very easy to feel. Check out the pictures and see if you need it. I am a real person who is easy to find. Reproduction item. The mounting holes are supposed about 3-1/2" apart on center.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original International Harvester IHC McCormick Deering M Rod Grease Cup, this should work for at least 1-1/2 to 6hp sizes. This is the grease cup that threads into the end of the crank shaft and the cap is left handed thread.
Buy It Now
Free Shipping
Condition: New Location: Haverhill, United States
This is new 7mm spark plug wire with a copper stranded core. Has a cotton jacket woven over the rubber jacket with a lacquer finish. 5 feet of Black with red tracers spark plug wire. Order more than one and you will get one piece of wire cut to the length of your order. Example order 3 get one piece 15 feet long.
0 bids $4.00 Shipping
Condition: Used Location: Marine City, United States
Original Brass Name Tag Fuller & Johnson Hit and Miss Gas Engine Model NC 2 Hp. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Copper gasket for various engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Cape Coral, United States
A new Wico EK trip used on many engines that utilize the popular Type 2 trip.
0 bids Free Shipping
Condition: New Location: Tellico Plains, United States
2 GIB HEAD KEYS.
0 bids Free Shipping
Condition: New – Open box Location: Campbellsport, United States
BABBIT APPEARS TO BE IN GOOD CONDITION ON BOTH SIDES. THERE ARE NO CRACKS, BREAKS, OR WELDS ON THIS PART. I ACQUIRED THIS ENGINE IN PIECES FROM AN ELDERLY GENTLEMAN WHO WAS IN A RESTORATION PROCESS.
|
|
|
|
Vintage CLINTON Engine/Motor Mini Bike/Minibike. Go Cart/Kart Gocart/Gokart Gas(Fuel) Tank. with Braket& Straps. Minor dings. Looks like it's been primer/painted on. Bracket looks worked on. Very minor rust inside. Classic Clinton Arrow Logo still visible. Some pix shown with it mounted on the motor(Just Tank. Bracket& Straps are for sale) May fit Briggs& Stratton or Tecumseh. Mac 10, Lauson etc. Maybe Lawn Mower, Tractor, Snow Blower, Rototiller or? Great start for Stock. Custom, Driver or display on your man cave garage or?
|
|
|
VINTAGE BRASS HIT& MISS EX-CELL-OSPINDLE ENGINE OILER BY ESSEX BRASS CO. IT IS 3 1/2" TALL. NO CRACKS. SEE MY OTHER AUCTIONS AND VISIT MY EBAY STORE FOR MORE GREAT ITEMS. WINNER TO PAY $7.00 POSTAGE& HANDLING. COMBINED POSTAGE FOR MULTIPLE ITEMS. I HAVE A 7 DAY FULL REFUND POLICY IF NOT PLEASED WITH YOUR PURCHASE. GREENFIELD GALLERY P.O. BOX 270535 WEST ALLIS. WI 53227*wi buyers add 5.6% sales tax
|
|
|
Here for your consideration is this vintage antique brass oiler or greaser for the collector or restorer. This one comes to you in very good condition with no problems that I can see. Its marked on the top Ohio Injector Company Wadsworth. Ohio, it has a number one above the threads for the size. The body measures about 2 inches tall and is 2 inches in diameter, overall this is 4 inches from top to bottom with the screw in the position as shown in the pictures, this has a 1/4 NPT thread. Everything moves freely and all the threads look good, there are very few scuffs or nicks on this, its real nice. Please look at the pictures and email with any questions. Free Shipping anywhere in the USA!
|
|
|
Call Brett At 309-261-5695 for questions. h5 Vintage Montgomery Wards Airline 62-6619A 6 Volt Generator Battery Charger Gas Engine Powered. 37 amp. 225 Watts, number 705A. Cast Iron Base Engine turns over unknown if complete have not started. View all photos carefully. Check out my other items! Buyer pickup only. I can lift onto your transport loose exactly as shown but will not b e crat ing. Payment due within 7 days of auctions end.MUST BE PICKED UP WITHIN 45 DAYS AUCTIONS END On Aug-19-12 at 01:30:39 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
For sale. The crankcase for a Briggs and Stratton ZZ engine. I have cleaned up the crankcase in my bead blaster, so you can see that it has no cracks, breaks, or welds. Please check out the pictures, and send me a message if you have any questions.
|
|
|
Original Stover CT2 filler lid.I coated the inside with West System resin to eliminate rust. There is some minor pitting see pics
|
|
This is a Big Crank Handle I believe is For Fairbanks Morse Type H Hit& Miss Gas Engine. If I Am Wrong Let me Know& I will Adjust The Listing. Looks Like it Has A Part Or Casting Number On It of: H-415-A-3 Looks like it is For A 2 3/4 Crank Shaft! Catch Dog Is Good. It Will Need A new spring. No Damage Or Repairs Of Any Kind, A Very Nice Original Part With Good Original Patina.Selling As IS. This Item Weighs 10 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 ... morePlease Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
Nice little running engine Will need a gas tank But other than that complete Posted with 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e40ce7d95-0x105-
|
|
|
This is a 3TN A68. Good running engine. Same block as the 3TNA72. 1 9 hp 3 cylinder. 30 day warranty with BIN price. It comes with injection pump. Starter, alternator, water pump and flywheel. Lots of Kubota and Yanmar engines to choose from. 931)492-0316 Shipping to a commercial loading dock only.
|
|
|
THIS IS A ZF TRANSMISSION PUMP HOUSING. ONE HALF, P/N 42-02484R,SHOULD FIT ALOT OF DIFFERENT DEERE BACKOES,310S 310 E, 310G 310SG, 410 G, 410E AND MORE,THE OTHE HALF OF THIS WAS HIT BY A ROCK AND WAS BROKEN, SOLD AS IS THIS IS PART OF A BUNCH OF STUFF I BOUGHT AT A AUCTION! WILL BE PUTTING A BUCH OF STUFF ON, SO CHECK. I CAN HAUL THIS AS I TRAVEL ALOT DOWN THE WEST COAST SO COULD HAUL, BUT GET IN TOUCH BEFORE BUYING THOUGH ON LOCATION. THANK YOU VERY MUCH! by adding my eBay Store to your FavoritesCheck out my! Be sure to add me to your!
|
|
|
You are bidding on a nice Champion 34. 1/2" long reach spark plug. Great shape and ready to use. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13f22aa9393-0xb9-
|
|
|
AUCTION IS FOR A NICE SMALL HIT MISS ENGINE CART IT IS 4' X 2' REAR WHEELS ARE APROX 7.75 TALL FRONTS ARE APROX 6" TALL I AM LISTING 3 CARTS LOCAL PICKUP LISTING FOR MY DAD HIS NO. IS 217 440 4277 PLEASE NO PAYPAL CK OR MO OR CASH ON PICKUP IF WITHIN 10 DAYS On Jul-19-13 at 16:36:14 PDT. Seller added the following information:
|
|
Offered is a lot of great reference detail material for the vintage 4 Cycle Briggs and Stratton Gasoline Engine. Model 6B-H. Please review my photos, as the Operating Instructions diagrams on some of the pages of the 23 page booklet are detailed. There are additional parts lists and other diagrams within the booklet not photographed. Included in this lot is the original(not a copy) Operating Instructions Manual of 23 pages and 6 by 9 inches. Original Envelope for storage. A blank Registration Card. And. One page Form No. 1296 on one side, noted Form 1186 on the other, and labeled Parts List for a Rotary Mower, which I am not certain if originally came with the 6B-H manual, or not, but maybe helpful. All papers are clean and without moisture odors etc. Only issue I see is the back of the envelope ... morehas a few phone number notes written on it in pencil. And there is a slight tear on the cover of the operating instruction booklet. Free shipping. First class method. Thank you
|
|
Vtg Antique STITT Spark Plug Hit Miss Gas Sationary Engine Tractor Oil Field Here is a very nice NOS Stitt spark plug. I included many photos to show its condition. It is a large 7/8 inch thread plug with long reach extension. These were used in the big oil field type engines. I checked it with an old magneto. It still throws a nice blue spark. Please email any questions. Be sure to ask questions at least 24 hours prior to the auction end to receive a response before the auction ends. Payment: Timely payment is expected within 10 days of the end of the auction. Otherwise the buyer forfeits the sale. My customer satisfaction is most important to me. If you have any problems with your item. Please email me as soon as possible to let me know. I can not resolve an issue if I am not aware there ... moreis one. Domestic Shipping: US buyers to pay $6.95. Hawaii and Alaska shipping may be more. Shipping amount will be adjusted) Most packages are shipped USPS with delivery confirmation. I will discount shipping for buyers if applicable. If the item is paid for. I will refund shipping overcharge if applicable. Shipping includes: most items are packaged with new bubble wrap and new packing peanuts. Your item will be packaged professionally. Securely and shipped so it arrives at your location in the same condition. I generally ship USPS Priority Mail. I will ship Parcel Post upon request. On bigger items I will compare price between USPS and UPS Ground to find the cheapest shipping. Sometimes prices are inflated due to the weight of the item. I have to list a shipping price and can not state the actual shipping until the item is packaged. So the shipping may look very high. On these and larger items the buyer I will compare shipping prices to get the best shipping price. I will gladly estimate shipping costs if you email me with your zip code. International Shipping: Due to fluctuation in shipping prices. International buyers will be asked to send their country so actual shipping can be calculated. I require all international pack
|
|
Vintage Wisconsin Engine Manual ABN AKN Issue MM-253-A This listing feature a Vintage Wisconsin Engine Manual for models ABN and AKN. Issue MM-253-A. It’s in fair condition with wear to the page edges and wear and stains to the covers. Please see photos for exact details. Thank you for checking out our listing. We’d be happy to answer questions you have about this item before bidding. Make Model Size Condition As pictured Inventory# MDX 54 O4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We ship most items Worldwide. Any time there is a free shipping option; this option is for domestic shipping only. The shipping calculator should show you what the shipping + packaging will cost for domestic and often international purchases. If there is no international price shown. ... morePlease send questions about shipping cost before bidding. Insurance is included as part of the shipping price. Due to eBay seller protection policies, we no longer will ship First Class International. Sorry! All international buyers are responsible for paying any customs fees associated with your purchase. International shipping cost in NOT-Refundable under any circumstance. MADISON HEIGHTS ONLINE CONSIGNMENT does its best to make sure all items are packed securely before shipping. Sometimes this includes packaging costs in the shipping price for things like bubble wrap. Padded envelopes, etc. Please keep this in mind when examining our shipping cost. We want to do everything we can to make certain an item arrives at your door in the same condition it left ours. MADISON HEIGHTS ONLINE CONSIGNMENT would be happy to combine shipping where it is reasonable to do so. Keep in mind that sellers also must pay about 9% of shipping price in eBay FVFs. Paypal processing fees are also charged on the shipping price. That being said. If you want to combine multiple items into one shipment, we are happy to send a combined quote to save you shipping cost, but you must send a combined invoice request prior to making payment. Do NOT send
|
|
|
THIS IS A MAYTAG TWIN CYLINDER ENGINE FLYWHEEL COVER. USED ON THE 1937-1952 TWIN ENGINES. HARD TO FIND PIECE.
|
|
|
vintage barn find new way air cooled gas engine. has good compression and spark(bosh magneto) stored indoors since last time run. was told this motor is a 3 1/2 HP. Looks like aprox 4"or 4 1/2" bore? heavy cart has 11" wheels. overall measurements 42" from ground to tip of sparkplug, 33" from bottom of gas tank base to top of new fan shroud made at a machinery building shop copyed from what was left of the original. has 20" flywheels 1 1/2" crankshaft and 8" x 4" flat belt pulley. has a hand stamped#U1544 at base of cyl.
|
|
|
Hit miss style maytag model 72 twin cylinder engine has good compression and turns over well it has a small dent in the flywheel that wont affect its operation pickup is free Has spark on both sides I did not try to start it
|
|
|
this is a power products light weight like brand new with Fairbanks recoil 2 cycle. we will pack with care 585 690 1534 if more info needed
|
|
|
Very rusty original flywheel cover for a Maytag model 72 multi motor. needs cleaning up. rusty very sound item. I will be listing other Maytag parts this week. Thanks for looking
|
|
maytag gas engine looks like an older restoration starts easy and runs good. sold asis Please read\ before bidding 1) This item is used not new. Unless otherwise stated. Please look at pictures and read description. This Item will be shipped with insurance, unless otherwise stated. E-mail me with any questions before bidding. I do not need bad feed back or complaints from bidders that bid on used and expect new. Also don’t bid for someone else I don’t need bad feed back for something they did not see. All sales are final. No returns, and sold as is! 2) I must get communication on method of payment within 24 hours and payment must be received within 5 day or item will be relisted. 3) feed back is an important part of the ebay system but if you don't wish to give me feedback I won't ... moregive you feedback. 4) I can give a close estimate of shipping cost. Please ask. I do not need complaints after you have won the item. All I need is your zip code. I do not ship to P.O. boxes! I ONLY SHIP TO CONTINENTAL US! Due to my work schedule I ship paid for items on the fallowing weekends. 5) There are absolutely no refunds on the engines I sell. This one included. Also there is no guarantee that the engine will run when you receive it. This engine have been run and tested, and ran when it left here. I don't have any control over what you put in the gas tank or in the crank case. This engine needs to be filled with fresh gas engine a good grade of oil. SOLD ASIS ALL SALES ARE FINAL! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1431560ae1e-0xfd-
|
|
|
Ford Industrial 4 Cylinder Engine- LRG 425 OHV- 2.5L 153 cid Running when pulled- but weak& burning oil Regular Head Used in generators. Welders, forklifts, trenchers, boom lifts& air compressors
|
|
|
You are bidding on a super nice. No. 1 1/2 Lunkenheimer Paragon ball check oiler. This is the Cadillac of old engine oilers. If you have an engine that creates back pressure, or tired of cheap oilers that quit working, you need to invest in a Paragon. There is no damage to this oiler that I can see, period. Good glass, and very minimal scuff marks on the brass. Has been used recently and it worked flawlessly, you can see some oil residue inside the glass. You won't be dissapointed if you buy an oiler of this quality! Don't pass it up! Good Luck. And Happy Bidding!
|
|
|
Nice set of maytag 72 twin multi motor Good useable parts See pictures
|
|
|
Lot of old brass pet cocks. Shut off cocks and drain cocks. All sizes and shapes.
|
|
|
GREAT ESTATE FIND! VINTAGE BRIGGS& STRATTON GAS ENGINE METAL GAS TANK ONLY. MADE IN U.S.A. IT IS 5" TALL. 8" LONG AND 5" DEEP. IT IS CLEAN INSIDE WITH NO LEAKS! THEY ARE IN VERY GOOD CONDITION WITH NO DINGS. DENTS, CRACKS OR REPAIRS. THERE IS PAINT LOSS. RUST AND HAS USE MARKS. GREAT COLLECTABLE! THANKS FOR LOOKING! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Briggs and Stratton FI straight fin block assembly with piston. Rod, cam gear and lifters. These parts are in very good condition and came from a running engine which ran smoothly and did not smoke. No attempt was made to clean or hone the cylinder walls; all items are as removed. No cracks or damage. This is about as nice as you will find; I used other parts from this engine to build up a slant fin model. Ship to USA 48 states only.
|
|
|
Caterpillar 3116 300hp matched pair. 1200hrs RTO's but will need work or rebuilding. Or for additional cost I can rebuild these cores to look like pictures from block up. OEM Parts and warranty,Call 781-837-5424 for more info.
|
|
|
Rebuilt Caterpillar 3406 complete marine engine 450hp with marine gear 2.5:1 ratio(other ratios available at additional cost) H/E or K/C. Can ship worldwide. Call 781-837-5424 for more info.
|
|
|
For a two cylinder Vanguard engine. Very good condition.
|
|
|
Up for sale is a nice condenser for a Maytag model 72
|
|
This engine was the main engine and in good working condition in October. 2013 when pulled from a 73' tugboat. The engine was pulled along with the transmission and has been sitting in a ship yard waiting to be sold. This engine fires right up using compressed air(~90 psi required) The exhaust smoke cleans up in ~1.5 minutes(2 minutes in colder temperatures) which is a strong indication of how well the cylinder and sleeves still hold compression. Engine is a"dry sump" configuration which means a scavenger pump sends oil to an external tank before it is sent back to the engine by the main mechanical oil pump. This makes oil changes and monitoring oil condition very simple. The oil was recently changed just prior to scrapping the tug using 28 gallons of SAE 40W Diesel Oil. Idle ... morespeed is approximately 180 RPM and maximum RPM is 600. This engine was never run above 450 RPM since it was in my possession(10 years) due to the specific tug application. Engine runs and starts using no electricity. No glow plugs, no starter, etc. This is what engines SHOULD be like! Turbocharger provides 3-4 psi of boost at max engine speed and spins free with a separate oil reservoir. This turbo oil was never changed while I had the engine( Full original Lister Manual available with purchase of this engine. Shipping weight is estimate only. However will require dedicated flat semi for shipping outside Windsor, Ontario, Canada. Engine is located in Windsor. Ontario, Canada, however eBay wouldn't allow accept a Canadian zipcode for some reason. Engine is US owned, however vessel was scrapped in Canada. Transportation back into the US is not complicated, providing Bill of Lading from Ship Yard.
|
|
|
hi i am selling a stationary engine, 50s. Has good comprecion never put it has to work, but it works. Need to clean the carburetor does not have the exhaust looks very old, the original color was green. I paint red and black, the shipping cost is $ 90 dollars in usa only. if less will refund the rest.model tank heater generator model 7d28-7.serial 43j 5171. thank, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-143e333f4d8-0xfd-
|
|
|
A NICE COMPLETE MODEL 72 FUEL TANK TOP WITH KICK PEDAL PIN.NO CRACKS OR CHIPS JUST NEEDS A GOOD CLEANING.
|
|
This Is an Exhaust Rod Complete With the Igniter Trip Arm Bracket(Part Number 345K30) Trip Arm. For the 1 1/2 1 3/4& 2 Hp Hercules, Economy, Jaeger Hit& Miss Or Throttle Governed Gas Engines Using A Webster Magneto. The cam Roller turns. With only A little play in it, There is A little wear On the exhaust Rod& the trip Finger, But It is All Useable, Even the spring Looks Good! It Is Complete& in Good Condition. This would be Ideal For someone who Is trying to Put An Engine together, That is Missing Some pieces Or Build one Out Of Parts. A very hard to find Original Complete Setup That Is ready to put On your engine. Go to to work!No Damage Or Repairs.Selling As IS. This Item Weighs 3 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack ... moreEverything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
This is a nice rubber flat drive belt. It is 7" wide by 28' long single. It has a new splice included is the splice wire. The belt is textured on one side and smooth on the other. Can run on either side. The one side shows some wear and freying but does not affect the performance of the belt.
|
|
|
UP FOR SALE I HAVE A MAYTAG ENGINE BALL MUFFLER AND PIPE ALL COMPLETE AND READY TO MOUNT. THIS SETUP MEASURES 48 INCHES LONG AND IS IN VERY GOOD CONDITION. I WILL COMBINE SHIPPING ON MULTIPLE PURCHASES.
|
|
This is a VERY hard to find original Divine"Red Devil" water motor made by the Divine Water Motor Company in Utica. New York. It is in good original condition with no cracks, breaks, or repairs of any kind except for a chip in the face plate and a turned off screw near that. Neither of these blemishes hinders it's performance. It turns nicely with very little wear in the bearing. The brass water cups on the paddle wheel look to be in great shape. It has the original brass coupler on it that should fasten to any garden hose or faucet. It also has the original grinding stone on it. This could be removed and a small pulley put on it to run a light belt driven implement. This is a 6 inch motor, the largest the company offered, and was shown in original advertisements running a wash ... moremachine. These water motors are extremely tough to find in the wild or even at swap meets. They look great with your water pump or water ram display at the shows! The pictures tell the story on this one. It will likely be a long time before another one turns up and it probably won't be this nice. Don't miss it. Good Luck.
|
|
|
You are Bidding on Vintage Briggs Stratton Model 6 Fan Cover and Original Fuel Tank with Brackets no rust thru clean inside original condition approx 9" long X 41/4 Dia.
|
|
|
For sale. A running Wisconsin AKN engine. The engine has a gear reducer on it with an approximate 2:1 gear ratio. The engine is in good shape, although it is missing the gas tank. You can see video of the engine running here Please check out the video. And send me a message if you have any questions.
|
|
|
Water pump housing and fan for LeRoi D201(possible others) engine. Fan turns freely. Not sure about pump condition, no visible cracks in housing. May also fit some CONTINENTAL engines that have the same casting number. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This is a very hard to find ear"nubber" for an International Harvester steel Pony corn sheller. These were used to clean the ends of the ears or cobs when the sheller didn't get those kernels. It is in excellent condition with no cracks. Breaks, or repairs of any kind. These were options on these shellers and you hardly ever find one with one on it. It fits on a 15/16 inch shaft and has a part number of 2285A. The slotted set screw is loose and this nubber is ready to be used on a sheller. It will likely be a long time before another one turns up so don't miss it. The pictures tell the story on this one. You won't be disappointed in any way. Good Luck.
|
|
This is an original New Holland hit and miss gas engine diecast toy made by Irvin's Model Shop several years ago. They were made in very limited numbers and aren't real easy to find today. This one is number 657. It is cast aluminum and is in good shape for it's age with no cracks. Breaks, or repairs of any kind. The flywheels move as they should. It measures about 2 3/4 x 4 and is 2 3/4 inches tall. It has some nicks and paint chips on it from being played with but that's just enough to give it some character. These are fairly tough to find in the wild and don't even turn up that often here on Ebay. Recently one of these sold for close to $200 so don't miss out on this one. It would be a nice addition to your early toy collection especially if you like or have hit ... moreand miss engines. The pictures tell the story. You'll like it. Good Luck.
|
|
|
HERE WE HAVE A NICE RUNNING TWO CYLINDER ENGINE FOR THE B6000 MODEL TRACTOR. THIS MOTOR ALWAYS STARTS UP AND RUNS GOOD, NO BURNING OIL, NO SPOTS ON THE FLOOR, THIS ADD IS FOR THE BASIC ENGINE ONLY, NO CHARGING SYSTEM, NO AIR FILTER, NO STARTER, NO FLY WHEEL OR CLUTCH, NO RADIATOR, NO HYDRAULIC PUMP. PICK UP ONLY.
|
|
|
For sale. A running Montgomery Ward& Co engine. The serial tag is faded, so all I can read on the bottom of the tag is Montgomery Ward& Co. The serial number is stamped into the plate and is 1652842. You can see video of the engine running here Please send a message if you have any questions.
|
|
|
Unit worked good when last used but selling in as-is condition. There is a hole in the"how to read plug-scope" see picture) Leads and screen are in good condition.
|
|
|
Nice straight air shroud came off a Briggs and Stratton WM size washing machine motor. Measures 9-1/4" top to bottom. I sold the carb but have the block and head left. Let me know if you need other parts and I'll see if I can make you a package deal. This auction is for air shroud ONLY. Posted with
|
|
This Auction Is For One Very Nice Old One Cylinder Engine That Was Recently Taken Out Of Service In The Oilfield& Replaced With An Electric Motor And Two Parts Engines That Are 75% 80% Complete But Stuck! These are all three Fairbanks Morse Model Number 208's. The one turns over& it still has good compression when the flywheels are turned over by hand. It is mainly missing the magneto and carburetor but another carburetor is included as pictured. This engine may very possibly be in good running order. The other two are for parts or will need rebuilt! There are also two piles of small parts that go with this auction. What you see is what you are getting! These can be safely stored where it is UP TO 6 MONTHS if need be at no additional charge but will need to be paid for within 7 ... moredays of auction's end! We will not ship this assortment of engines and parts so it will need to be picked up here at our yard. The pictures pretty well tell the story but feel free to ask any questions PRIOR TO BIDDING! We have We also have several loose parts to fit this models of Fairbanks Morse engine. Inquire with wants!
|
|
Offering a neat old Wisconsin Engine Type AEHS. Size 3 x 3 1/4. Serial number 286290. Was told it was used during war to start biplanes. I have no documentation to prove that. I am also told that these are used on farms and other industrial applications. About 23" tall by 20" wide and 19" deep. Flywheel part turns. This came from the estate of an old collector in his ninety's. Please ask any questions. This is too HEAVY to ship. It can be picked up in Spring Hill. Fl. Or discuss other shipping options. I might be able to meet you on the road for I am going to a show in Round Top, Texas. The Georgia Peaches to Beaches event and Brimfield, MA. Payment is still due within 3 days auction end.The legal stuff: The merchandise comes from estate sales, flea markets, auctions, and ... moregood old picking. Photos are part of the description. So please look at ALL photos and ask questions before you bid I want us both happy. I am not an expert, but happy to share what information I am told or have. I strive for 5 star performance. Payment due within 3 days. Unpaid case opened after 4 days. Good Luck. e
|
|
|
LITTLE RED WAGON.1939 VINTAGE MAYTAG TWO CYLINDER MOTOR MOUNTED ON AIR TANK AND WAGON WITH 1/2 HP 1946 SEARS COMPRESSOR AND VINTAGE BRASS WHISTLE, COMPLETELY OVERHAULED BOTH ITEMS. CYLINDERS MAY BE INVERTED FOR EXHAUST ON THE BOTTOM.
|
|
|
KOHLER ENGINE FAMILY 2KHXS.62428C CC 624 MODEL CH18S SPEC 62506 SERIAL 3215603271 INCLUDES HYDRAULIC PUMP ENGINE STARTS AND RUNS GOOD PLEASE CONTACT JOSH AT 540-320-8606 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE. DUE TO RECENT TRANSACTIONS WE NO LONGER ACCEPT PAYPAL, ALL PAYMENTS OVER $1500 MUST BE PAID VIA CASH, WIRE TRANSFER OR CASHIERS CHECK
|
|
|
This auction is for a used 5hp Briggs& Stratton engine. It came off a garden tiller. I put in new gas and it started right up. Could use a tune up but seems to run good. It leaks a spot of oil over a days time. Took a pic of the garage floor where it sat. I took off the side cover but could`t see where it was coming from. It didn`t smoke when it ran. Would be a ok motor if you keep a eye on the oil. I`ll ship it with No Gas or Oil. Model# 135202 Type 0258 01 Code 960409YD Shipping will be to the lower 48 states to a home or business address. Local pick-up is fine. Payment due in 3 days. Thanks for looking.
|
|
|
Flywheel technology gives you a smooth motion during your workout. While dual action handle bars work your arms and upper body. Adjustable resistance lets you customize your routine. LCD display tracks calories burned speed and time(two AA batteries not included) Paddles are easy to move. Sturdy steel frame, MUST BE PICKED UP WILL NOT BE SHIPPED. ALREADY ASSEMBLED.
|
|
|
Motor is off a 1937 bolens walk behind tractor. Briggs and Stratton corp. Milwaukee wis. usa. tag reads, type 300152 model BR6 ser. 33161, motor turns over with compression and no nocks or rattles, comes with original hand crank, I don't have any spark, the unit was stored in a barn for over 45 years, will be listing many more parts to the tractor. total weight is 100 lbs motor is being sold for restoration, motor can be picked up in person, 45.00 crate fee for building and materials
|
|
|
This is a nice brass base magneto. The tag says Acme Magento. J.G. The Tritt Electric Co Union City Ind. It is 6 inches high, 8 inches long and 3 1/4 inches wide. The mounting holes are 4 inches center to center. Any questions contact me. Will not ship out of US unless contacted about shipping rates. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-144d9756d0a-0x110-
|
|
|
FUEL PUMP REMOVED FROM A KUBOTA V1100 WITH 1189 HOUR ON IT. ACCORDING TO THE HOBBS METER. CHECK OUT MY OTHER ACTION FOR OTHER PARTS, I WILL COMBINE SHIPPING ON MULTIPLE AUCTIONS. WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL RECEIVE. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME.
|
|
|
STARTER REMOVED FROM A KUBOTA V1100 WITH 1189 HOUR ON IT. ACCORDING TO THE HOBBS METER. CHECK OUT MY OTHER ACTION FOR OTHER PARTS, I WILL COMBINE SHIPPING ON MULTIPLE AUCTIONS. WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL RECEIVE. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME.
|
|
|
GLOW PLUGS REMOVED FROM A KUBOTA V1100 WITH 1189 HOUR ON IT. ACCORDING TO THE HOBBS METER. CHECK OUT MY OTHER ACTION FOR OTHER PARTS, I WILL COMBINE SHIPPING ON MULTIPLE AUCTIONS. WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL RECEIVE. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME.
|
|
|
HEAD BOLT SET REMOVED FROM A KUBOTA V1100 WITH 1189 HOUR ON IT. ACCORDING TO THE HOBBS METER. CHECK OUT MY OTHER ACTION FOR OTHER PARTS, I WILL COMBINE SHIPPING ON MULTIPLE AUCTIONS. WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL RECEIVE. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME.
|
|
|
For sale. A running antique Lauson engine. The engine is complete, and is in really nice shape. The serial tag contains the following information; Type: SSA-404 No: 5228045 You can see video of the engine running here: Please feel free to send me a message if you have any questions.
|
|
|
Just pulled runs the very best three cyl.d1105 Kubota diesel motor only 591 hours come from a local county fell of truck 975.00 with starter and alternator we are going to be selling the deck in another auction if you need let me know 72 inch cut in very good condition any question call or text 863-698-9446 happy bidding we can help with loading
|
|
|
This is a nice grist mill. It turns freely. A couple of the mounting ears are broke off(see pictures) Someone has made the adjustment screw. They have also braized an extension funnel on the top.
|
|
|
This is 7 HP fuller Johnson stationary engine. The engine is loose. It appears complete except for the oiler. the rocker arm is broke. The engine is clean and does not appear to have been used much. Check out my! I will be listing another engine. Buyer to pay for and arrange shipping. No Paypal All checks must clear. to be paid for within 7 days and picked up within 1 year. Selling the engine as is due to age. no warrantees or guarantees.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-144ec04251b-0x105-
|
|
|
Yanmar 4jh-te 56 hp turbo diesel with less than 700 hrs. New alternater. Starter, and oil pan casket. Needs fuel pump rebuilt. $5500, call me Bob 214-923-6093. Local pick in Pensacola
|
|
|
Nice piston for a maytag model 82 washing machine motor Part#205 Does have ring Look good. Other 82 parts listed Ask questions
|
|
Antique Lunkenheimer Co#5 Hit Or Miss Oiler Brass W/ Nice Glass. As You Can See Someone Cut The Handle Off The Valve I Believe It May Have Been Wood. Otherwise Unmolested Piece Here Primer Functions Well Nice And Smooth. Shipping $11 Priority USPS Mail Service Please Check Our Feedback And Bid With Confidence. Terms PLEASE ASK QUESTIONS BEFORE YOU BID ALL SALES ARE FINAL! Unless otherwise noted all items are"sold as is. We do our best to describe flaws. Missing parts, age, condition and/or damage. Payment must be received within 24 Hours From close of auction unless other arrangements have been made. Immediate payment is required for all BUY IT NOW Listings. We ship Monday thru Friday and usually ship via United States Postal Service[oversize packages may ship via UPS] PLEASE NOTE: FOR ... moreINTERNATIONAL SHIPPING WE ONLY SHIP PRIORITY INTERNATIONAL WITH INSURANCE. PLEASE CHECK SHIPPING CHARGE BEFORE YOU BID, IF YOU DO NOT WANT TO PAY FOR THIS SHIPPING CHARGE DO NOT BID! For domestic shipping we are recommend insurance. Item will ship on the business day following receipt of your payment. Once payment has been received we will leave feedback for you& would appreciate if you would do the same when you receive your item. Thank you for looking& happy bidding! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144eed201e7-0x10d-
|
|
|
Single pole switch in very good condition
|
|
Hercules 1 1/2 Hit and Miss gasoline engine. This is an earlier design with the oval hopper and the ignitor" make and break" ignition.Using a Webster Tri- polar Oscillator magneto. I've been collecting,repairing,buying and selling one cylinder engines for about 30 years,long enough to be able to know that,nice original, unmolested,engines are getting harder to find. I've sold several"Restored" engines to folks that later have indicatd they would like to also have one that is still original and in good running condition. I have several such engines in my collection,and am offering this one for sale,only because my space is maxed out. I hate to leave an engine outside under a tarp. Everything about this engine is original,including the Hercules cart it's sitting ... moreon. The gas tank needed to be replaced and the lubricator was added other than that this is the real deal.It starts on the second pull of the flywheels and once its warm it coasts from 12 to 14 clicks between firing( thats 24 to 28 revolutions) There are no cracks or repairs,and compression is good. I can store this engine for 30 days or longer if arrangements are made ahead of time,or I can strap it to a pallet for shipping,Our zip is 95482 We are located in Ukiah Ca. which is 2 Hrs North of the Golden Gate Bridge. This engine is easy to start and a pleasure to listen to.One thing to think about,this engine can always be made to"Look Pretty" But it took nearly a Hundred Years to get it to look this. You are welcome to ask any question you might have through ebay or you are welcome to call me, Joe 707 367 1284 Thank you for looking,and we've made a youtube video so you can see it in action. $250. through Paypal and balance, certified check or cash upon delivery. video goes here"
|
|
|
MAYTAG 72 HANGER MOUNTING BRACKET EXCELLENT CONDITION
|
|
This is a nice old barn fresh New Holland Mill on what appears to be the original wooden legs. One leg is damaged and will need repair. Also has the original wooden hopper box on top, flywheel, and belt pulley. Some red paint remains visible. It turns freely and appears to be complete, including the flat metal plate that sits inside the hopper. I did not take the mill apart or otherwise do anything to it, so you are buying it as is, so please look at all the pictures and ask questions before bidding. New Holland is the top name in hit and miss engines. And the feed mills are just as sought after as the engines. I believe this one is considered the#3 mill, but I did not see a#3 anywhere on the casings. Because of its size and weight. It will be offered for local pickup only, or the buyer can ... moremake all arrangements for shipping. Payment is expected within 3 days of auction ending. Thanks for looking and good luck bidding.
|
|
|
1938 MAYTAG ENGINE IN EXCELLENT CONDITION WAS RESTORED A LITTLE OVER A YEAR AGO STARTS AND RUNS GREAT SERIAL# 855906(1938) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144fd1db09b-0x110-
|
|
Up for auction is a small fuel tank with mounting bracket and shutoff valve.Tank has a pinhole repair on bottom and some denting in same area as well. Inside is not bad very light surface rust on bottom but shinny in most areas.A light cleaning or some tank sealer would make this nice hard to find smaller fuel tank run your engine in style.Cap fits nice but needs a new cork gasket as the one with it has shrunk.Tank is 3 1/2" round and 8 5/8" long.This is a great solid tank. By bidding on my auctions you agree to pay in 3 days or less.This is a USA auction only,I ship with priority mail mostly and tracking is part of my shipping and is included.I pack very well and ship fast. This is an auction there are no returns if you do not like it so if your not sure do not bid.Feedback left ... moreafter you do.Thanks and have fun.I do combine shipping
|
|
Up for auction is a very nice Ashcroft Double Spring Traction Engine Gauge.Its 5 1/2" across with a heavy cast iron case and brass ring attached with 3 screws one of which is missing.Still has two of the mounting tabs to mount to the back wall of the steam engine cab.Glass is missing and there is a small ding between the 0 and 25 very hard to see,there is of course various paint loss and wear to gauge too.Number of gauge is 961226A.Gauge is untested but shows no signs of water damage,dial is straight as well.this is in great all around shape I have not taken it apart and I do not think it has been taken apart I would say this is a great canidate to restore and put back to work or add to your collection. By bidding on my auctions you agree to pay in 3 days or less.This is a USA auction ... moreonly,I ship with priority mail mostly and tracking is part of my shipping and is included.I pack very well and ship fast. This is an auction there are no returns if you do not like it so if your not sure do not bid.Feedback left after you do.Thanks and have fun.I do combine shipping
|
|
|
fits Dodge diesel 3500-5.9 diesel engine-6 speed transmission. Selling still in box- reman. feel free to email any questions. Posted with
|
|
|
Diesel Injector Pump- RMFD. 2000 Dodge 3500 5.9 with 6 speed transmission. I am selling this still in the box. Never been installed. If you have any questions feel free to email me. Posted with
|
|
|
THIS IS FOR ONE COPY OF A VERY OLD"THE MCCORMICK DEERING GAS ENGINE HANDBOOK" NUMBERS ON BACK ARE A-739-R. 9-19-I PRINTED IN U.S.A. SO IT COULD BE 1919? BUT THAT DOES NOT REALLY COENCIDE WITH THE COMPANY MERGERS IF I REMEMBER RIGHT. BECAUSE IT IS PUBLISHED BY THE INTERNATIONAL HARVESTER COMPANY(INCORPORATED) INSIDE. REGARDLESS IT IS OLD AND DOESN'T REALLY STATE AN ENGINE MODEL. SO I BELIEVE IT IS JUST FOR THE OLD HIT/MISS. IT COVERS EVERYTHING FROM INTRODUCTION, EXPLANATION, TO MAINTAINANCE, REPAIR, OVERHAULING. THE BOOKLET IS DOGEARED AND MISSING THE CORNER ON THE FIRST 2 PAGES. IT HAS WATER STAINS ON ALL THE PAGES, BUT EVERYTHING IS EASILY LEGIBLE. TONS OF PICTURES AND ILLLUSTRATIONS AND 64 PAGES LONG. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14503d8cc7c-0x110-
|
|
|
You are Bidding on Vintage 4 Stroke Reo working Magneto and Flywheel fits Models211-298-522-552-2980H.
|
|
Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Hit miss stationary engine operated AMANCO farm house lighting generator control panel. As found at central Iowa farm. Back board is heavy thick slate with beveled edges. 18 X 24 inches. Makers metal plate at top, AMANCO Farm Lighting Plants, Associated Manufacturers Co. Waterloo, Iowa. Other metal plates include“Generator” and“Lights” above knife switches. Large knob marked“To raise voltage(with arrow) AMANCO Waterloo Iowa USA. Volt and Amp meters with original glass. Slate is fine condition with just a small paper thin flake(shown in one of the photos) Needles present in meters but don’t know if meters work. Knife switches open/close smoothly. Large knob does not turn. Back of rheostat ... morehas surface rust and is dirty. The coil in lower right on front has ragged insulation. Very heavy weighting just under 70 lbs. Please ask questions… Pick up only; will not crate. Will not ship. Payment due 48 hours after auction ends
|
|
|
Retired collector selling out. Belt in very usable condition. Not much wear. 3" wide x 12' long loop. There is about a 10" piece laced in for some reason. I used it like it is.
|
|
|
MAYTAG 72 ENGINE FLYWHEEL GUARD EXCELLENT CONDITION
|
|
|
Two early brass engine oilers from around 1915. Posted with
|
|
|
Three antique brass engine oilers made by the Gits Bros Manufacturing Co in Chicago. IL. Posted with
|
|
|
YANMAR.FITS THE CHINA MADE 10 HP DIESEL. STATER WITH MAGNETS ASSEEN IN THE PICTURE. GREAT USED CONDITION
|
|
|
Had Maytag engine on it at one time.One of the boards is cracked.See pics.can be fixed
|
|
|
Caille Liberty Drive Marine Engine. Don't know much about it. What is pictured is all I have for it. Don't know what is missing. If anything. Has good compression, nice brass carb. and ignition system is complete. It measures 16" high with an 11 1/2" fly wheel. Very small and lightweight. Sold as is. Pick up only. If interested in shipping in the US. You must contact us, so we can give you a quote.
|
|
AMERICAN MACHINIST MEMORIES(SELECTED ARTICLES FROM EARLY ISSUES OF AMERICAN MACHINIST MAGAZINE) BABBITT 1910-1916(PRACTICAL HINTS. TIPS AND"HOW TO" FOR MANIPULATING WHITE BEARING METAL) 2003 REPRINT BY: LINDSAY PUBLICATIONS 72 PAGES CONTENTS: METHODS USED IN BABBITTING BEARINGS ANCHOR HOLES FOR BABBITTED BEARINGS A BABBITTING ARBOR FOR LONG BOXES BRONZE AND BABBITT LININGS TWO RAILROAD SHOP KINKS COMPRESSING BABBITT IN BEARINGS QUICK METHOD OF REBABBITTING PULLEYS BABBITT IN THE ENDS OF STEADY REST JAWS BABBITTING BABBITT METAL VERSUS BRONZE USING ROSIN PAPER WHILE BABBITTING SPLIT BABBITTING MANDREL RENEWING LATHE SPINDLE BEARINGS A BABBITTING METHOD MAKING BABBITT AND BABBITED BEARINGS(MAKING THE BABBITT. BEARING SHELLS AND THEIR PREPARATION, POURING OF THE BEARINGS AND FINISHING) ... moreAN INTERNAL GEAR CUTTING AND TWO BABBITTING DEVICES TO GET EVEN SHRINKAGE WHEN BABBITTING AN EFFICIENT BABBITTING MANDREL MACHINING SPLIT BABBITT BUSHINGS HANDLING BABBITT MOLD FOR HALF BEARINGS BABBITTING ARBOR TOOLS IN A WESTERN RAILROAD SHOP(BABBITTING FIXTURES. DETAILS OF THE FIXTURES, BLOCK FIXTURES, BABBITTING GIBS AND FIXTURES FOR AXLE BRASSES) BABBITTING A BUSH WITH OIL GROOVES TAPPING LUBRICANT FOR BABBITT METAL A BABBITTING TALE BABBITTING FIZTURE FOR BOXES"FOUNDRY FINISHED" BEARING SURFACES AN UNUSUAL METHOD OF BABBITTING BEARINGS SEMI-AUTOMATIC BUSHING MOLD ADVANTAGE OF A BABBITTED HALF-NUT(JULY 1914- ENTROPY) ADVANTAGE OF A BABBITTED HALF-NUT(AUGUST 1914- WALREN) BABBITTING THE NUT FOR A MULTI-THREAD SPLINED SHAFT TWO BABBITTING FIXTURES(BEAM STANDS) A BABBITTING FIXTURE(FOR IRON BOX) CONNECTING-ROD BABBITTING FIXTURE SOME CALIFORNIA TRACTION ENGINE DETAILS(CYLINDER FIXTURE. TRANSMISSION BOXES, PUMP-CASE PLANING FIXTURE) PHILADELPHIA TEXTILE MACHINERY CO. BORING FOUR BEARINGS IN PLACE DESIGNING A BABBITT MOLD AROUND SMALL-SHOP BABBITT FIRES(DECEMBER 1915- JOHN VAN DEVENTER) END MILL BABBITT AROUND SMALL-SHOP BABBITT FIRES(MARCH 1916- E.W. WRIGLEY) AN EMERGENCY REPAIR ON A STONE CRUSHER BABBITTING SOLID
|
|
|
Nice lot of valves. Some new. Some used. You are bidding on the lot. USA SHIPPING ONLY. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14505d9b3b5-0x10d-
|
|
DISCOVERING TRACTION ENGINES BY: HAROLD BONNETT COPYRIGHT 1975 SHIRE PUBLICATIONS LTD 56 PAGES 4-1/2" X 7" BOOKLET CONTENTS: DIAGRAM OF A TRACTION ENGINE WITH DESCRIPTION OF NUMBERED PARTS INTRODUCTION THE ORGIN AND HISTORICAL BACKGROUND OF THE TRACTION ENGINE THE PRESERVATION OF TRACTION ENGINES THE PORTABLE ENGINE THE GENERAL PURPOSE ENGINE THE STEAM ROLLER THE SHOWMAN'S ENGINE THE STEAM PLOUGH ENGINE THE LIGHT STEAM TRACTOR THE ROAD LOCOMOTIVE PRINCIPAL MECHANICAL FEATURES OF A TRACTION ENGINE TRACTION ENGINE RALLIES TRACTION ENGINE CLUBS BIBLIOGRAPHY MUSEUMS AND OTHER COLLECTIONS WITH TRACTION ENGINE EXHIBITS(NOTE: DISCOLORIZATION TO COVER) NOTE: YELLOWING TO PAGES) NOTE: OLD BOOK SMELL) PLEASE CONTACT ME WITH ANY QUESTIONS! PLEASE CONTACT ME FOR INTERNATIONAL SHIPPING DETAILS! ... moreI WILL GLADLY COMBINE SHIPPING ON MULTIPLE PURCHASES! PLEASE READ CAREFULLY BEFORE BIDDING* THIS IS ALL THE BORING BUT IMPORTANT STUFF) PLEASE DO NOT CONTACT ME TO CHANGE SHIPPING AND HANDLING PRICES WITHIN THE USA! SHIPPING AND HANDLING IS WHAT IT IS! I DO CHARGE A HANDLING FEE TO COVER MY TIME AND PACKAGING COSTS. PLEASE DO NOT CONTACT ME TO PUT A REDUCED PRICE ON ITEM VALUE FOR INTERNATIONAL SHIPPING! IT IS ILLEGAL TO DO SO AND I WILL NOT DO IT! UNLESS THE ITEM HAS BEEN GROSSLY MISREPRESENTED THERE WILL BE NO RETURNS. ALL ITEMS SOLD“AS IS” PLEASE READ ITEM DESCRIPTIONS CAREFULLY. CHECK PHOTOGRAPHS BEFORE BIDDING. I WELCOME ANY QUESTIONS AND WILL TRY TO ANSWER AS PROMPTLY AS POSSIBLE. I AM NOT RESPONSIBLE FOR BUYER’S REMORSE. FEEDBACK IS IMPORTANT. AFTER RECEIVING YOUR ITEM. PLEASE POST FEEDBACK FOR ME AND I WILL DO THE SAME FOR YOU. THIS WAY I KNOW THAT YOU HAVE RECEIVED YOUR ITEM AND ARE SATISFIED. IF YOU ARE NOT SATISFIED WITH YOUR PURCHASE, PLEASE EMAIL BEFORE YOU LEAVE FEEDBACK. PERHAPS WE CAN WORK IT OUT BEFORE ANY FEEDBACK IS LEFT. THANK YOU AND GOOD LUCK!
|
|
|
THESE ARE GOOD USED PARTS. PUMP WORKS GREAT. ID SUGEST CLEANING INJECTOR PRIOR TO INSTALL. STILL CONECTED TO THE FUEL LINE. HAPPY BIDDING:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14505d9b3a4-0x112-
|
|
|
nice 3/4 hp associated pony mag gear with all the teeth in great shape
|
|
|
CAM SHAFT AND SPROCKET IN GOOD USED CONDITION.FITS THE CHINA MADE 10 HP DIESEL
|
|
Here is a good used fuel tank for a Briggs& Stratton engine that takes the later non adjustable carburetor first introduced in the 1990s. The current Briggs list is around $90.00. You can see it looks good inside and still has the baffle and foam inside and the gas cap. The last pic shows the only noticable dent I could find. It is on the back side. If you look hard there are a couple of shallow dents in the lower part of the tank in pics 3 and 5. Those dents are hard to see on these pics and also in person. PAYMENT is by PAYPAL ONLY. Ebay will not allow advertising other payment methods. Ask. Feedback given as required and the same appreciated. Contact is expected in 5 days and payment within 14 days or auction is void. Good Luck! AT AUCTION END. My first email to you will include the ... moretotal and payment info through an ebay generated invoice. SHIPPING. You can use the shipping calculator and pay anytime after auction end. Most communication is in the morning. I print my own USPS and UPS labels and drop off is a couple of miles away. With PayPal. And my system, the item usually goes out the same day if payment is received before 10 AM. NOTE! NOTE! Payment is expected in a timely fashion. Computers. Fixin motors and ebay are fun but it sure is a pain chasing bidders. A non-paying bidder notice and negative feedback will be given if required.
|
|
Here is a Briggs& Stratton NOS piston part number 295846 that fits many of the 140000 series engines. It is.010" oversize for the STEEL BORE models and It is no longer available from B& S. The piston is stained from age and the rings and pin retainers have very minor surface rust. In the last pic I tried to show the staining on the piston and one half moon shaped spot to the right of center that I thought. At first, was a crack but it is not. This piston is solid. PAYMENT is by PAYPAL ONLY. Ebay will not allow advertising other payment methods. Ask. Feedback given as required and the same appreciated. Contact is expected in 5 days and payment within 14 days or auction is void. Good Luck! AT AUCTION END. My first email to you will include the total and payment info through an ebay ... moregenerated invoice. SHIPPING. You can use the shipping calculator and pay anytime after auction end. Most communication is in the morning. I print my own USPS and UPS labels and drop off is a couple of miles away. With PayPal. And my system, the item usually goes out the same day if payment is received before 10 AM. NOTE! NOTE! Payment is expected in a timely fashion. Computers. Fixin motors and ebay are fun but it sure is a pain chasing bidders. A non-paying bidder notice and negative feedback will be given if required. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-145089bf0e4-0x111-
|
|
|
For sale is a points timing cam and key for a twin cylinder model 72 Maytag gas engine. This part is in excellent useable condition and came off a running engine. Posted with
|
|
Vintage 1920 Standard Sanitary Mfg. Co. Steam Mill And Factory Catalogue B. This catalogue is actually a hard cover book. That measures 9 1/4" x 7" x 1 3/8" It has 529 pages, and it is loaded with illustrations of their products. This book does show wear, stains, slight odor, dirt, etc. But overall, still very acceptable. All pages are present and bound, with the binding showing wear and starting to separate. There are no loose pages, and for the most part, the pages are clean. The pages toward the end get worse. All pages are legible, and I could not find any with tears or dog eared. A very interesting book showing their products and prices for them. Besides their tools, there is lubricators, stoves, kerosene engines, gas engines, pump engines, boilers, steam whistles, oilers, ... morepumps, guages, etc. The list goes on, you name it, it's probably in here. I have provided many photos to show the condition and content of this book. Please look them over for a better idea of what is being offered. If more photos are needed, I can send them directly to you. Always happy to answer any questions. Thanks for looking.
|
|
This is a Webster Magneto Trip Finger Assembly. With the straight Push Rod Journal for Webster Fired Gas Engines, Including Galloway, Economy, Associated, Most Of The Other Gas Engines that use Webster Ignition. This Will Fit Engines From the 1 1/2 HP To the 8 Hp Range It Will Also Work For most Any Other Engine Using the Webster Magneto This is About 6" In Overall Length. 3/4" Of Adjustment, Has Approx. 1" of 5/16" Fine thread Just As the Originals were Made! This Is All New. Except The Push Rod Wedge, It Has some wear As you Can See in the pictures But Will Work Just Fine. No Other Damage Or Repairs, It Is Complete with All the Correct Hardware, Including The Shims, Correct style spring& cotter Pin! Quit Looking For that Hard to find Original part. Get one of these ... moreWebster Trip Fingers Ordered& Get that Webster Fired Engine Running! This Is Complete& ready To Bolt On Your Engine, Adjust& Run.Selling As IS. This Item Weighs 2 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
Up for auction is a pair of Briggs and Stratton Model FH engines. One engine is a slant fin and one is a straight fin model. I only have the parts you see here. They are both locked up from sitting. And had been sitting under a work bench for about 40 years before I bought these intending to restore them. However, I've picked up a project that is going to require more of my attention then I thought. I wish I could describe these better. But I think the photos do a better job then my words could. If you have any questions. Please feel free to email me. Item in as-is condition with no warranty. Buyer to pay for S&H. Please remember these are heavy. Please email me for a more accurate shipping quote as the one here is only a rough estimate. Thanks for looking.
|
|
|
This engine is in good shape. It's been awhile since we put this engine together so i don't remember all the specifics. But the head has never been used and the injector tips are new. The project ended when we found out the fuel pump needed an overhaul and at the time we didn't want to put more money into it. At present we have too many projects and need this one out of the way. ENGINE IS SOLD BOBTAIL If you want the gear box. I will sell it for $2000. It is a Yanmar gear box and it's brand new. Model# KMH60A Ratio: 2.04 Manufacturing# 00832
|
|
|
Antique Air Compressor came off a Briggs model WMB. Seems to be in good shape, 10" tall and 9" wide,Great for the collector or the small engine enthusiast 14 day return policy. We accept paypal and always combine shipping We have over 19.000 NOS and NLA parts in stock,if not listed just call(540) 273-7541 Thank you
|
|
ORIGINAL JENSEN MFG. CO. JEANETTE PA. STEAM WORKSHOP Up for bid is a ORIGINAL JENSEN Steam Workshop. CONDITION- Please see PICS! Normal wear. Paint loss, dusty, some sort of dried epoxy on the wood which I will leave for new owner to easily remove. IT'S A WORKSHOP what do you expect! All parts move. This is sold AS-IS. This is a great piece don't miss out! If you have any questions please ask and I will try and answer you as fast and as best as I can. If you need more photos please shoot me a message thanks! If an issue should arise PLEASE contact me ASAP for a resolution I am here to help! My goal is to provide the best experience possible! Please see my other items as I will be posting them as fast as I can! Upon winning this item please allow 3-5 business days for shipping and handling. ... moreI usually ship ASAP. Thanks for looking! Ships to US ONLY! BID WITH CONFIDENCE!
|
|
|