|
|
Order by: |
0 bids $10.00 Shipping
Condition: Used Location: Bluffton, United States
And wood handle 5 1/2" long.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Used on lots of antique engines, these are nice new reproduction Mica washers for igniter's. Made to the highest of standards these will provide you with many years of trouble free service!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
It is a low density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. It is intended for sealing oils, fuels, and water in applications with short duration maximum temperatures up to 180.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A new reproduction flywheel key for the 1 1/2 and 3 hp John Deere E engines these are copied from a original they are not a gib key they are a special taper brought to you by the oldest and most complete dealer in reproduction JD parts.
Buy It Now
$4.24 Shipping
Condition: New Location: Fayetteville, United States
I have a really nice reprint of the 1925 Novo Type S Gas Engine Instruction Manual. This manual covers the all the type S engines. talks about kerosene, gasoline and even natural gas equipped engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
High temperature rated head gasket material! Includes all Eight pieces, head gasket, two pan gaskets, side cover gasket, ignitor gasket, magneto gasket & felt and the top cover gasket.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This booklet is Number 107T. Nice print and easy to read, it is not a cheap photo copy style reprint! Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What works on one might not work on another.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A nice looking solid brass with tee handle drain cock.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
With high tension ignition, Wico EK magneto. Well put together and covers a lot of material. Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What works on one might not work on another.
9d 6h 47m 46s 0 bids
$250.00 Now
Free Shipping
Condition: Seller refurbished Location: Post Falls, United States
The engine has been mounted for display. Base is included.
Buy It Now
$10.40 Shipping
Condition: Used Location: Sherwood, United States
Buy It Now
Free Shipping
Condition: Used Location: Orient, United States
Flat Belt Pulley. holes have been drilled all around the pulley. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back.
Buy It Now
Free Shipping
Condition: New Location: , United States
1068 - Crank Bolt Socket - 27mm. Use for easily breaking loose crank bolts. 3998 - Benz Crankshaft Pulley Holder. Use with 1/2" square drive tools. Kit includes.
0 bids Free Shipping
Condition: New – Open box Location: Bhavnagar Wadva S.O, India
[not included in price].
Buy It Now
Free Shipping
Condition: New Location: , United States
MADE IN USA.
0 bids Free Shipping
Condition: New – Open box Location: Gaines, United States
Part and Box May Have Shelf Wear.
Buy It Now
$10.00 Shipping
Condition: New Location: Zanesville, United States
Made from solid brass. (1) Grease cup, Four are shown in the photo.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
High quality and ready for your engine.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
You get 6 pairs of the most common sizes of oiler sight glass gaskets.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A nice looking solid brass with lever handle pet cock.
Buy It Now
Free Shipping
Condition: New – Open box Location: Baldwin, United States
It Is ready To Use. You Can Leave it Shiny, Rust it up To Look Old & Original OR Paint it to Match Your Engine. These Are Made Specifically To Copy The Original Spring Used By Waterloo. Most Originals Are worn Out, Or Cobbled Or Have Been Replaced By The Wrong Spring !
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A nice looking solid brass with lever handle drain cock.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
It seems to be in good shape shape and ready to use. A little insulation is missing were the wires go into the case, that will not effect the operation of the unit. It will work fine as is though. It would also be very easy to repaint the case if desired.
Buy It Now
$4.50 Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Fits: H1, H4. Used in the H1 mag and on the International LA/LB engine and lots of other applications. A great way to get your engine back up and running as good as new! Part: International Points H1 H4.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Brass plate just stamp your hp, rpm & serial number.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made in the USA! Why buy anywhere else.
Buy It Now
Free Shipping
Condition: New – Open box Location: Tulsa, United States
Fits Delco 1112643 and 1112644 distributor only.Check your distributor number because Massey used several different distributor models. 12V negative ground only. Compatible with internal resistor 3 ohm coils.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Vinyl Sattley decal. Our decals are MADE IN THE USA with a high quality material to withstand many years of being on your engine.
0 bids $16.95 Shipping
Condition: New – Open box Location: Hermitage, United States
ALFA LAVAL SALE.
0 bids Free Shipping
Condition: Used Location: Jeddo, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Includes 5.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
I do have gaskets listed for various oilers and also sight glass.
Buy It Now
Free Shipping
Condition: New Location: Tulsa, United States
New distributor cap and rotor, fits 3-cylinder Continental TM-20 equipped with Perlux distributor.
Buy It Now
$4.25 Shipping
Condition: New Location: Fayetteville, United States
This manual covers the setting up and basic operation of the engine. It is 12 pages. a great addition to any collection.
Buy It Now
$4.24 Shipping
Condition: New Location: Fayetteville, United States
This manual covers from the 1 1/4HP to the 15HP. A few pics of engine parts in the manual. the rest is all parts pages. It is 12 pages. Color front and back. No date on it that I can find. It covers the different sizes and all the parts for them.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
3/8" pipe thread. Bowl is 1" to the inside.
Buy It Now
Free Shipping
Condition: New Location: New York, United States
Fill it with 24 ounces of fluid: 12 ounces of Gasoline and 12 ounces of Diesel. Made in New York, USA.
0 bids Free Shipping
Condition: Used Location: Bramwell, United States
Vintage Briggs & Stratton 2HP engine with teel pump. Pump model 3P413 Serial number 416154. Ran good when started 4 months ago, have not tried pump-no hoses. Everything looks good including propeller. Local pick up only.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Chicago, United States
WAREHOUSE FIND! FITS IGW TYPE DISTRIBUTORS THAT HAVE SPARK PLUG WIRES COMING OUT THE SIDE RATHER THAN OUT THE TOP. THERE IS A COVER THAT SCREWS ONTO THIS CAP (NOT INCLUDED WITH THIS CAP) THAT HOLD WIRES DOWN ON THE SHARP STAB TYPE POINTS.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
It is the best product I've seen on the market for a wide range of uses on our old hit & miss gas engines as well as auto and light industrial use. It is 1/32 thick. It's a high quality product made in the USA.
Buy It Now
Free Shipping
Condition: New – Open box Location: Brookfield, United States
130200 to 131299 rated 5.0 Hp. This manual has chapters and or instructions for New reprint of the Original Factory Manual with all pages ~ Full size ~ Printed and Bound like the Original. This manual is.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A tune up kit for the JD E series engines it fits all 3 sizes of engines. It consists of both the springs that were re engineered to provide the proper tension not just a copy of a copy of a copy like the other guys, a pair of my custom made Stainless Steel points, and a bag of Mica washers plenty enough to do the job and a pair of the correct length cotter pins.
0 bids $24.00 Shipping
Condition: Used Location: Marine City, United States
The block is in real nice condition. There’s no damage to the fins and the cylinder bore is in good condition. Please look at pictures.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Fits the 1,2, and 3 needle carbs.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
$10.00 Shipping
Condition: New Location: Farwell, United States
The item for sale here is a NOS FM Recoil. This will fit many engines, but I do not have a list of how many. The bolt patern is 3-1/4" center to center in a square. It is in Nice New condition. Help yourself to a good deal.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
$4.24 Shipping
Condition: New Location: Fayetteville, United States
This catalog covers from the 5HP to the 16HP Galloway engines. Really nice info about all the construction of the engine and parts to include the basic care and operation of the engine. It has the basic repair parts as well.
0 bids $18.40 Shipping
Condition: Used Location: Holgate, United States
It appears to be in pretty nice shape. Check out the pictures and see if you need it. I think there are several different kinds of Sparta engines and this may not be correct for all of them. I am a real person who is easy to find.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Centralia, United States
You are looking a complete maytag 92 engine carburetor complete kit with lead washers and gasket. I will put one each pickup tube for deep tank and short tank but just one bottom for pickup tube needle for gas ajustment needle handle nut spring also 4 brass bolts one each air and gas brass nut on the bottom and needle and spring . I have been selling parts for more than 22 Year. . Every thing you see in picture . Condition is "New". Thanks for looking.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: Gib Head Shaft Key - 5/16 x 2.5. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need!
0 bids Free Shipping
Condition: New Location: South El Monte, United States
Alarm switch 3408607. Suits for cummins generator. oil press alarm switch. Professional advise and any technical problem will be provided. 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products.
0 bids Free Shipping
Condition: Used Location: Enola, United States
The housings are about 1-3/4" across & tall. About 4-1/2" tall overall. Could use a good cleaning. Not sure if it is operational, it is untested and sold as-is, the glass all looks good. Two may have broken tabs on the top.
|
|
|
This auction is for a Vintage Delaval Brass Oiler. The oiler glass has NO chips or cracks It measures about 4 1/2 inches long and about 1 3/4 inches in diameter. Please look at photos for items condition. Please check my other auctions for more vintage items. Item will be shipped upon receiving payment. All items are shipped insured and the insurance price is included in the shipping fee. Will accept Paypal. If there are any problems with your purchase. Please contact me via eBay to resolve the problem. I am proud my listings and positive feedback and will work with you to preserve it. US BUYER PAYS SHIPPING COSTS OF $6.00 US. PAYMENT/ INTERNATIONAL SHIPPING DEPENDS ON BUYER LOCATION. WILL COMBINE SHIPPING ON MULTIPLE ITEMS- I accept Paypal. If you have any questions please feel free to ask ... moreme.
|
|
Antique International Havester Hit Miss-LB- Engine 1 1/2 to 2 1/2 HP 300-500 RPM Pulley speed. Good Motor Needs restored and parts. B lock good with no cracks or chips. Motor turns freely. Head good. magneto/ Coil untested! What you see is all we have! Most parts are here or the main compon en ts. Missing gas tank. 1 push rod, Coil/ plug wire needs replaced. Missing head bolts, you will need new gasket s and anything else not seen in pictures. Purchased at auction. Own er passed and all items auctioned off. Was owner of Clermont county equipment in Ohio. We have Maytag dual cylinder hit miss motor going up for sale as well 95% complete. International measures approx. 28" x 14 1/4" x 17"Tall Made In Chicago Illinois. Large wheel measures 14 5/8" No. on maker tag 1BA 125668 ... moremay be a 2 on end? I'm no expert on these motors so feel free to ask any questions will answer best I can. Willing to ship but will have weigh before I can give any prices. Anything over 150 pounds will be freight. will add shipping soon. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e59c67b25-0xf0-
|
|
I HAVE FOR SALE IS I BELIEVE TO BE AN ORIGINAL FACTORY MAYTAG VERTICLE UPRIGHT CRANKSHAFT. THE CRANK IS 7 9/16" LONG. IT IS 5/8" IN DIAMETER. I RECENTLY FOUND THIS CRANKSHAFT IN THE ESTATE OF AN OLDER MAYTAG COLLECTOR. THERE WERE MANY LOOSE VERTICLE PARTS. THAT I HAVE LISTED ON HERE. THERE WAS ANOTHER CRANK ON HERE A WHILE BACK AND APPEARED TO BE AN EXACT MATCH. THE SHAFT WILL NEED TO BE CLEANED OR POLISHED. BUT THERE IS NO REAL WEAR ON THE SHAFT. I SEE NO REASON WHY THIS WILL NOT BE A VERY USEABLE PIECE. SO IF YOU HAVE A MISSING MAYTAG CRANK OR ARE IN NEED OF A GOOD ONE ON THE SHELF HERE IS YOUR CHANCE. KICK OFF YOUR WINTER PROJECT WITH A BANG. PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction ... moreend. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
I HAVE FOR SALE AN ORIGINAL PISTON AND ROD FOR AN UPRIGHT MAYTAG. THE CASTING# S23 IS FOUND ON THE PISTON. THE BRASS ROD HAS NO# ON IT. THERE ARE NO RINGS IN THE PISTON. IT APPEARS TO BE 2" BORE. THERE IS SOME WEAR IN THE WRIST PIN. BUT EVERYTHING IS IN GREAT SHAPE FOR ITS AGE. THIS IS A NICE CLEAN ORIGINAL PIECE. THAT IS SELDOM FOUND LOOSE. IF YOU HAVE A UPRIGHT MAYTAG PROJECT THAT IS IN NEED OF A PISTON HERE IS YOUR CHANCE. PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you ... moreare or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
I HAVE FOR SALE AN ORIGINAL SET OF MAIN CAPS WITH THE ORIGINAL BABBIT BEARINGS REMOVED FROM A 3 H.P. FAIRBANKS" Z" ENGINE. I DO NOT KNOW IF THIS WILL FIT OTHER H.P.S OR OTHER LINES OF ENGINES. SO PLEASE LET THE PICS AND MEASUREMENTS BE YOUR GUIDE. THERE ARE NO CRACKS, BREAKS, OR WELDS ON THIS PIECE ANYWHERE. THE MAIN CAPS HAVE A TOTAL LENGTH OF 4" AND A WIDTH OF 4 3/4" THE MAIN CAPS HAVE CASTING#S ON THEM THEAT READ: ZB 12. THE BABBIT APPEARS TO BE IN EXCELLENT SHAPE WITH NONE OF BEING CRACKED OR BROKE. THESE MAIN CAPS HAVE THE NICE ORIGINAL, GREEN PATINA LOOK. IF YOU WERE SHORT SOME MAINS FOR YOUR" Z" NOW IS YOUR CHANCE TO OWN THAT" MISSING-LINK" PC. THAT HAS BEEN KEEPING YOU FROM FINISHING YOUR ENGINE. YOU WILL NOT BE DISSAPOINTED WITH THIS PIECE. ... morePAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do ev
|
|
I HAVE FOR SALE A VERY EARLY E.C. SIMMONS TAKE APART SPARK PLUG. IT IS IN ORIGINAL GREAT CONDITION. IT DOES NOT HAVE STANDARD PIPE THREAD. IT IS A LARGER FINE THREAD PITCH. LIKE 7/8 BY? THERE IS NO CHIPPING IN THE PORCELAIN. THE BRASS TOP IS UNMOLESTED. THE HEX IS GREAT NOT ALL ROUNDED OVER. THIS IS A DOUBLE ELECTRODE SPARK PLUG. IF YOU ARE A SPARK PLUG COLLECTOR. OR WANT TO MAKE YOUR EARLY EXHIBIT A STEP ABOVE THE REST. HERE IS YOUR CHANCE. PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking ... moreout if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
I HAVE FOR SALE A PISTON/ ROD COMBO THAT WAS REMOVED FROM A FAIRBANKS AND MORSE 3HP MODEL" Z" THE PISTON HAS A DIAMETER OF APPROX. 4 7/16" AND A LENGTH OF 5 3/4" THE PISTON/ ROD HAS A TOTAL LENGTH OF 18" THE RINGS ARE ALL LOOSE AND IN GOOD CONDITION. THE PISTON/ ROD IS IN GOOD COND. SHOWING LITTLE SIGNS OF WEAR. THERE ARE NO CRACKS, BREAKS, OR WELDS ON THESE PCS. ANYWHERE. THE ROD HAS THE CASTING#S: ZB 18& 20 STAMPED ON IT. THE ROD'S BABBIT APPEARS TO BE IN EXCELLENT USEABLE CONDITION AND HAS A DIAMETER OF APPROX: 1 7/8" ALL ORIGINAL SHIMS ARE INCLUDED ON THE ROD, JUST AS THEY WERE PULLED. I WOULD CONSIDER THIS A BOLT-IN READY TO GO PIECE. DON'T PASS UP THIS OPPORTUNITY TO FINALLY PUT THAT 3HP Z TO WORK AT THE SHOWS. I WILL BE LISTING MORE PARTS FOR ... moreTHE 3 HP" Z" ENGINES IN THE NEXT COUPLE OF WEEKS. THANKS FOR LOOKING! PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a chang
|
|
Because half the time we don’t have the slightest idea what we’re doing. Old age) It will be up to you to do your own research to determine what this item is. If it’s complete, or how old it is. Unless I state I know for sure in the description. I might just be guessing as to what I think this item might be. Be sure to ask questions if need be. All 9 photos are for your viewing pleasure and to help you determine just what the heck this thing is. Please remain seated until this ride comes to a complete stop. Thank you. Complete except for flywheel. If I had the flywheel I’d hook it up to a barrel of water and get it running. Turns over just fine and the mag is hot. Waukesha FC 94. 446071 engine tag. Bosch MJA 4C-102. 50232 magneto tag. This was purchased at an old automotive repair shop auction ... moreand was found under a cabinet in a back room. Openings were closed off. exhaust, carb, water in& out) I wouldn't be surprised if the old tractor wasn't hauled off to the scrap to make room for the auction. From what I could find on Google; The Trail Tractor was built and developed in Portlan d Oregon. 1939-4 3. It was the father of the WW II CA-1 for the Army, 1944- 46. Because of the silver paint and no Army type numbers found on it. I think it's the earlier Trail Tractor rather than the"Clark Airborne" Dozer that the Army called it. Cylinder head casting number is CHC 30277 68-402D and a tag looking casting of 415 42(Date code? Casting# on timing cover is BE 805-J Casting number for the block is behind the carb and hard to see. But I t hink it's close to 68820 CWC. And behind the governor it looks like ALLOY ENG and some numbers. Last 3 are 202 You are welcome to have your shipper pick it up here. Pack it for you, and ship it to you. I will load it into their truck. But will not pack it. Or you can take that long needed vacation and c ome on out to Oregon. It's quit rain ing for now) Only comes with what is described and shown in my photos in the description area. All our listed items are
|
|
|
You are purchasing this 1947 Allis Chalmers C tractor with 59" Woods mower. New battery installed 2012. Minor oil pan leak. Work horse. Please call 734-652-3021 for viewing. Delivery is available at a charge. Price varies on location. Not all locations available.
|
|
|
This is an ultra rare Monitor 3 wheeled power lawn mower. These Monitors mowers were built with a Maytag model 72 twin cylinder washing machine gas engine. The mower housing and front wheel are all aluminum and were sand blasted before painting. This mower is complete and original including 3 blade cutter. The Maytag engine has new rings. Cylinders honed, gaskets, and spark plugs. Serial number is 104484X(March 1947) Call 406-721-1409 in Missoula. MT. Thanks
|
|
|
Please see pictures vi rage antique item Posted with
|
|
I HAVE FOR SALE A NICE ORIGINAL FAIRBANKS AND MORSE 6 HP MODEL Z GEAR GUARD. THIS IS FOR AN ENGINE THAT HAS THE PLUG OSCILLATOR SET-UP OR NO MAGNETO AT ALL. THE GUARD LAYS RIGHT OVER THE TIMING GEAR AND GOVENOR GEAR. IF YOU HAVE A MAGNETO THERE WILL BE ANOTHER GEAR IN THE SEQUENCE THERE. WHICH CALL FOR A DIFFERENT GUARD. THIS IS A KINDA AWKWARD PIECE USUALLY REMOVED AND TOSSED IN ITS EARLIER LIFE. THIS IS YOUR CHANCE TO MAKE YOUR 6 HP MODEL Z FLAWLESS. IF YOU HAVE ANY PAYMENT. SHIPPING, OR OTHER CONCERNS. CALL JUSTIN(920) 210-3662 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping on all ... moreitems. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
I HAVE FOR SALE AN ORIGINAL STARTING CRANK FOR A FULLER& JOHNSON 4 HP MODEL NB. THE CASTING# IS 3N153D. JUST A QUICK MEASURE AND IT APPEARS TO BE FOR A 2 3/4" CRANKSHAFT. THERE ARE NO CRACK. BREAKS OR WELDS ON THE CRANK. THE HANDLE IS LOOSE AND FREE SPINNING AS IT SHOULD BE. THIS IS A VERY NICE CLEAN HONEST PIECE. IF YOU HAVE ANY PAYMENT. SHIPPING, OR OTHER CONCERNS. CALL JUSTIN(920) 210-3662 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping on all items. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. ... moreDelivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
I HAVE FOR SALE AN ORIGINAL WOODEN FINGER JOINTED OR DOVE TAILED BATTERY BOX. IT HAS A NICE WONDERFUL ORIGINAL BLACK PAINT PATINA AS MANY BOXES DID. IT ALSO HAS THE VERY ORNATE TIGHT FINGER JOINTED ENDS. THE IS A 1/2 HOLE IN THE SIDE TO RUN YOUR WIRES OUT OF. I PICKED UP THIS BOX IN THE LOOSE FROM AN OLDER ENGINE COLLECTOR AND UNSURE OF IT'S ORIGINAL MANUFACTURE. THE BOX MEASURES 10" WIDE BY 10" TALL AND 6 1/2" IN DEPTH. THE PATINA ON THIS BOX IS PRICELESS. IF YOU HAVE A NICE ORIGINAL ENGINE AND YOU NEED A BOX LOOK NO FURTHER. THE WIERD THING IS THERE ARE NO MOUNTING HOLES IN THE BOTTON OF THE BOX. IT MAY HAVE MOUNTED FROM THE BACK IN A FUEL TANK STAND? IT WOULD ALSO LOOK GOOD ON ANY ENGINE. LET THE PICTURES BE YOUR GUIDE. ORIGINAL BATTERY BOXES ARE NON EXISTANT ANY MORE. ... moreIF YOU HAVE ANY PAYMENT. SHIPPING, OR OTHER CONCERNS. CALL JUSTIN(920) 210-3662 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping on all items. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on
|
|
Visit My eBay Store: Resources Seller's other items About my eBay Store View other Auctions by category Generators AC Motors DC Motors AC Motor Controls DC Motor Controls Gear Motors Gear Reducers HVAC Fans and Blowers Lighting Electrical Parts Surplus Motor Speed Control Packages Phase Converters Test Equipment Breakers Receptacles. Plugs& Fuses We Have Thousands of products available. Let us know what you are looking for. Electric motors o DC motors o Single phase to 15hp Motor control o Electronic and mechanic motor protection devices o Magnetic motor starters o DC& AC speed controls o Medium voltage soft starters Power transmission products o AC and DC variable speed drive packages Fuses o Industrial power fuses o Electronic fuses o Medium voltage fuses Transformers Ventilation ... moreequipment Phase converters o Phase converters convert single phase to three phase Multiple motor loads in excess of 400hp available o Rotary and static models Power generation o Custom sets diesel 5 to 1000 kw o Custom gas 3 to 25kw o 1 and 2 bearing generators to 2000kw o PTO drive generator sets 10 to 160kw o High-speed gas air-cooled sets Power generator components o AC& DC metering(volts. Amps, hour, frequency, pf, kw) Analogue and digital o Safety switch engine safety and annunciator components o Voltage regulation o Electronic governing Power Factor Correction Technology Bid with Confidence Mitsubishi 6 Cyl Diesel Engine Description: 6 cylinder diesel engine for parts Payment: Paypal Shipping: Seller ships internationally(worldwide) Freight: See conditions below Store inventory: All of our ebay store inventory is stock to 2 weeks delivery check with us for current inventory level Overview 6 cylinder diesel engine for parts. Stamped on block- WO60A21332. Opposite side- 114111713 Customer Service To speak to a Friesen Electric specialist please call us toll free: 1-800-663-9414 Shipping Information Please provide your phone number for shipping purposes Seller ships internationally(worldwide) Freight Title of goods p
|
|
|
McCormick Deering m 1-1/2 hp fuel filler pipe and cap. No signs of repair. This item is old and original so sold as is. Thanks for looking and please check out my other auctions. Posted with
|
|
vintage jacobsen two cycle 321 engine GO KART MINIBIKE recoil start This is a nice little 2 cycle. These work great on mini bikes, and go karts. This one is missing the oil cleaner assembly, has a nice little base someone made for it, and has spark. See photos. WISCONSIN RESIDENTS AND PICK UP SALES PAY 5.5% SALES TAX•FREE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA•CHECK OUT MY other items! My business is called Antique Rustler. I have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to ... morewait for it to clear. I am a mechanic, explanation for the permanently dirty hands. I work 6 days a week and sometimes I have trouble making it to the post office I pay someone else to do my packing and try to ship as soon as I can. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you have any questions feel free to message me, I look forward to dealing with you! Powered by The free listing tool. List your items fast and easy and manage your active items. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f748f470d-0xf6-
|
|
|
Old rusty crank handle for a jaeger Hercules ecomomy 1 1/2;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f79e31d64-0xff-
|
|
For auction is a Fairbanks& Morse recoil rope starter for vintage gas engines. Chainsaws, etc. The rope pulls and recoils just fine. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. I cleaned it up a little to make sure it was in good shape. With a little more cleaning it would really look nice. If you want more pics just let me know and I will email them to you. This item is being sold as is. I will combine shipping whenever possible to try and save money. Many of the items I sell are vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy ... morewith your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check out my other auctions. Thanks. I am currently traveling a lot for work so I am mostly shipping on the weekends. I will try to ship your item as soon as possible but it may not go out until Saturday or Monday depending on my schedule. If you have any problems with your purchase please contact me through ebay. Thanks. This will fit other applications including Go Karts. Gocarts gokarts carts bikes minibike mini scooter and chainsaws old antique vintage rare Lauson clinton briggs
|
|
|
79cc Predator engine runs very good. Shaft is 2.4 inches long 5/8 inches in diameter has a 3/16 keyway and is tapped for a bolt. Engine is 22 lbs dry weight. 21/2 hp runs very good would make a good mini bike, water pump, small generator, tiller, edger, engine to name a few, very universal engine. shipped without oil or fuel.
|
|
|
Governor weights and pins for International M in good condition.
|
|
|
This is a maytag washing machine engine. it is an upright model. A friend said it had spark and compression but we don't know how to start it. It doesn't small like gas so I think it has been sitting for some time. sold asis in non working condition because I don't know how to run it.
|
|
|
This auction is for a non working. 1/4 scale Red Wing Hit& Miss Model Engine, Cooled Water. Latch Out Bar must be finished.
|
|
|
You are bidding on a very nice ratchet cover and ball oiler for a Maytag 92 engine. Great shape. Feel free to ask questions. Good Luck and Happy Bidding!
|
|
|
Nnnn PLEASE NOTE THAT MY GOAL AS A SELLER IS TO ALWAYS SATISFY YOU AS THE BUYER FIRST. STRIVING FOR POSITIVE FEEDBACK WITH 5 FIVE STAR RATINGS. IF EVER THERE IS A QUESTION OR CONCERN PLEASE CONTACT ME FIRST ALLOWING ME TO RESOLVE ANY CONCERNS. You are bidding on a Fairbanks Morse Gov. Part(see pic) for The 1 1/2 and maybe other sizes Nice part for you engine. See the pictures Check out my other listing. Have other engine parts I will be listing soon Ask question if you like call 615 335 9722 Good Luck
|
|
eBay Code Generator Visit My eBay Store: Resources Seller's other items About my eBay Store View other Auctions by category Generators AC Motors DC Motors AC Motor Controls DC Motor Controls Gear Motors Gear Reducers HVAC Fans and Blowers Lighting Electrical Parts Surplus Motor Speed Control Packages Phase Converters Test Equipment Breakers Receptacles. Plugs& Fuses We Have Thousands of products available. Let us know what you are looking for. Electric motors o DC motors o Single phase to 15hp Motor control o Electronic and mechanic motor protection devices o Magnetic motor starters o DC& AC speed controls o Medium voltage soft starters Power transmission products o AC and DC variable speed drive packages Fuses o Industrial power fuses o Electronic fuses o Medium voltage fuses ... moreTransformers Ventilation equipment Phase converters o Phase converters convert single phase to three phase Multiple motor loads in excess of 400hp available o Rotary and static models Power generation o Custom sets diesel 5 to 1000 kw o Custom gas 3 to 25kw o 1 and 2 bearing generators to 2000kw o PTO drive generator sets 10 to 160kw o High-speed gas air-cooled sets Power generator components o AC& DC metering(volts. Amps, hour, frequency, pf, kw) Analogue and digital o Safety switch engine safety and annunciator components o Voltage regulation o Electronic governing Power Factor Correction Technology Bid with Confidence Continental 60 HP Gas Engine Free Shipping in Continental US and Canada Description: Freight depends on location Payment: Paypal Product No: Shipping: Seller ships internationally(worldwide) Freight: See conditions below Store inventory: All of our ebay store inventory is stock to 2 weeks delivery check with us for current inventory level Overview 330 cubic inches. 6 cylinder Including radiator& fan Natural gas or vapour propane Customer Service To speak to a Friesen Electric specialist please call us toll free: 1-800-663-9414 Customer service will assist you with any questions or inquires you may have.
|
|
This is a Cast Iron Ball Muffler for the Sta-Rite OR La Crosse Hit& Miss Gas Engines. I think This Would Be correct for All the Earlier Engines. OR would look good On Any engine with 1 1/4" pipe thread exhaust. It is 5 1/8" in dia And 3 1/2" deep.This is in good Condition. It came off an Engine I bought And was replaced with the correct style. I am Offering this So Someone else can Complete their Engine! This Is A Re-Cast Muffler. NO Damage Or Repairs.Selling As IS. Nice Part Ready to Put To Work. On your Engine! This Item Weighs 4 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items ... moreFor more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
This is a vintage rope-start. Gas powered engine from the REO Motor Co. This is their Model 552-A, and was originally designed to power the 1949'Royale' Reel Lawn Mower from REO. This saw life in between as the power source of a home-made farm Mini-bike from whence I rescued it. This is a 1 1/2 hp. engine and includes the original cylindrical gas tank. The engine measures about 10 by 10 by 11 in. with a 1 1/2 in. power gear. This has some wear: the tank has a dent in one side/the carb has some moderate tarnish-corrosion/the rest has moderate rust patching/overall moderate greasiness-soiling-this has compression but has not been otherwise tested. a story from the SmokStak site: I have a 552 on a coaster wagon my dad built for me in 1959 i mounted the engine with its entire clutch and ... moredrive assembly. And used a bicycle gear on the wheel of the cart. i used to drive it all over the place, before I got my license, and only got pestered once. I was driving it in a parking lot, whan a cop stopped me and told me to take the machine home. He said it was making too much noise! I told him his cop car made more noise than my engine, and he got POed. He got out of the car, and looked at the engine, and says"It's running? Yeah it was. You could hear the valves but not the engine. Well, take it home anyway, and don't run the engine on the street" He then pulled away. i coasted to the top of the street that crossed my home street, and seeing no one around, popped the clutch and drove the cart home. I pulled it right into the garage, shut off the engine and got off the cart, and turned around. There was the cop, standing in the driveway! I told you not to use the engine on the street. Do you know how fast you were going on that thing? 50 Miles an hour! if I see you on the road again, I'm going to take it away! Fat chance I thought, I know the chief, and he lives next door! The 552 was pretty thrifty on gas, I could ride for an hour on one tank of gas. It looked really neat at night, as I had a AC LM
|
|
|
You are bidding on a used Honda 3.5 HP motor engine. Model GX110. A little beat up and has some dents in the gas tank. Good working condition. Horizontal shaft. Shipping only for USA lower 48 states. Cannot ship to PO Box. Good luck bidding!
|
|
|
Model"N" 2 1/2 or 3 horsepower piston 6.375 long 4.25 diameter with.375 rings original condition with slight pitting on top
|
|
|
You are bidding on a nice kickpedal and segment gear for a Maytag 92 engine. The gear is missing the yeilding tooth. But it is not necessary for use. Feel free to ask questions. Will combine shipping on items IF possible to save you money. Good luck and happy bidding!
|
|
|
You are bidding on a nice exhaust elbow for a Maytag 92 engine. Feel free to ask questions. Will combine shipping on items IF possible to save you money. Good luck and happy bidding!
|
|
This Awesome hardcover text is an absolute must have for any Steam Fitter. Plumber, Boiler Restorationist Engine Designer or Restorationist, Mechanic or Student of Old Engine and Steam Boiler Construction Styles and Techniques! Titled: BAILEY'S HANDBOOK" UNIVERSAL QUESTIONS AND ANSWERS FOR STATIONARY. MARINE AND DIESEL ENGINEERS AND FIREMEN AUTHOR ~ A. R. Bailey Published by THE GOODHEART- WILLCOX COMPANY Copyright 1953 This Beautifully written and illustrated text is a Killer information source on Boilers and Engines! CONDITION: Marvelous semi- gloss pages are cream colored, supple and tightly bound inside. The Covers Have Medium Wear. The Lettering on the Spine is Fading a Little. The Page Edges Are Very Good. The Interior is Has a Some Check Marks In the First Few Pages. Other ... moreThan That the Interior is Good. This text is in Good Condition For a 60 year-Old teaching guide! The condition is considered" GOOD +" by industry standards. OK. LET'S START OUT WITH THE MAIN QUESTION HERE. THERE ARE. 2.103 ANSWERS HERE! This is the kind of text every mechanic and boiler man wants at his disposal. It is simply packed with the kinds of questions and answers that the everyday layman is always thinking and wondering about. Every one wants to know the answers to individual questions without going through the hassle of reading an entire chapter or book to find that one answer you need and want to know Now! Sometimes you just don't even know where to begin to search. This awesome study book was used to Assist Professors. Students, Mechanics, Engineers, Firemen and Laymen alike in their acquisition of knowledge. It is filled with exquisite pen and ink line drawings and illustrations and Pictures. This masterpiece is surrounded by Dark Navy Blue Covers I t measures in at 4 3/4" by 6 1/2" It is 7/8" Thick! It has 43 Chapters. A 5 Page Index and 5 Pages of Early 20th Century Advertisements for a total of 273 pages of incredible information not easily found in modern books! If you are intere
|
|
Wisconsin Motor Corp 10HP(9.2hp@ 3600 RPM) Model AENLD 3 x 3.25(bore and stroke) Serial# 3983090 Spec# 16286 Complete with STARTER! In very good condition. Ready to go. Came off of a customers generator system. He upgraded to a 4 cylinder car engine(generation system) to backup the electrical system in his home. Complete Exactly as pictured. No flue tank. Was used with propane. All original. Shipping: Please note that the shipping is no problem. I will box/package it professionally. But the shipping cost will be calculated based on your location and if it is a business or a home. I would recommend that you have it shipped to a business or pick it up at the shipping location.just a thought.give me a call with any questions. Call me with the shipping location and I will give you an estimate ... moreon shipping cost. Item is in good condition.no problems. If you have any questions. Please give me a call.also free local pickup. If you need this item delivered in the Arkansas/Oklahoma/Louisiana/Texas areas.let me know. Exactly as pictured! Please take a look at all pictures. You are bidding on the item in the pictures. We accept PayPal Thanks for looking and good luck! There is no substitution for mutual communication in this auction environment. Please ask questions* Power Synthetics: Your Local AMSOIL Dealer Call with any question: 501-545-9339 H onesty, I ntegrity and P rofessionalism
|
|
|
This is a David Bradley Briggs Engine Glass Sediment Bowl with Original Fuel Line. Please look at picture for details. You will be emailed a tracking number when item is packed and ready to ship. If any questions Please E-mail me. Thanks Tom
|
|
This is a New Replica Ball Muffler For the Earlier Engines. Part# AG40 For 1 1/2 1 3/4& 2 Hp Waterloo. Hit& Miss Gas Engines& All Of their Contract Engines. Such As John Smythe, Sandow, DesJardens. T-Eaton, Imperial, Big Chief, Ect. I would say that if you Have any Waterloo Or Waterloo Contract Engine. That Uses A 3/4 Pipe thread this would be the correct style muffler for your Engine This is 4 3/4" In Dia. 5 1/2" tall 3/4" Pipe thread. These Are brand New Cast Iron Castings Done Professionally In A Foundry. Drilled& Threaded On A lathe, Then Riveted Together Just As The originals were. They Are ready To Put On Your Engine& Use, You Can either Rust it up To Look Original Or Paint it to Match Your Restoration. These are the Only Reproduction Mufflers like ... morethis Available. These are Very Well Made& Detailed. This is An Extremely Hard part to find, Most All Original Mufflers Are Missing! This Is An Original Part I had Patterned Up& Casting made from.So Don't miss out on your opportunity to Complete that 1 1/2 1 3/4& 2 Hp Waterloo Gasoline Engine Co. Waterloo Boy Engine Or One of the Many Contract Engines with A Super Nice Ball Muffler! If your Engine Has A 1" Pipe thread For Exhaust Contact Me Ahead Of Time And I will Make sure I have one that Size Or Thread One. This Item Weighs 7 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 6
|
|
Thanks for Looking! Check my other listings and bookmark my ebay store. I have HUNDREDS of interesting items and add more all the time! You are bidding on a vintage/antique Maytag model 72 horizontally opposed twin cylinder gasoline stationary engine. It is in good original condition. One of the spark plugs is broken. Has good compression. Engine turns freely. It is missing the knob that goes on the end of the air intake. I have not attempted to start it and it is sold as-is. Payment Policy Payment required through Paypal within seven days of auction end. If you expect a delay in payment. Please notify me. Returns Policy Returns accepted within 14 days. Buyer pays return shipping. Satisfaction guaranteed or your money back. Powered by The free listing tool. List your items fast and easy and ... moremanage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-140418e40e7-0xf5-
|
|
|
Up for auction is a 1 1/2 hp international m engine. Cart and mag not included. I have had it running no cracks or welds only needs mag to run main bearings loose do have extra set to go with it included it has diffrent fule pump looks like off a car? but it works good. lettering on cart still readable no shipping will need to pick up. can keep for a while if paid for. any questions ask Thanks
|
|
|
Original Maytag model 72 twin engine hanging or mounting bracket. Great condition. Still has original paint.
|
|
Normal 0 false false false EN-US X-NONE X-NONE Auction is for a nice John Deere 4.5 liter 4-cyl turbo diesel engine. This engine is rated at 125 HP at 2200 rpm. Year of manufacture is 2006. Equipped with a simple test wiring harness and start switch. Engine speed is controlled electrically. And the wiring harness includes a working throttle knob. A sketch of the wiring harness will be included. This engine has 1995 hours of run time according to the engine computer. A charge air intercooler is required. But not supplied. See it crank and run at: Other Details: Peak torque 387 ft-lbs at 1500 rpm Length: 33.9 inches Width: 24.1 inches Height: 40.9 inches Weight: 1083 pounds dry Alternator: 24V. 45A Bosch Starter: 24V Denso. 10HP Air Intake Heater equipped Flywheel housing: SAE#3 Flywheel size: ... more10” History: This engine was installed in a construction air compressor. And run for 1995 hours of testing during the development of a new compressor model, by a major equipment manufacturer in the US. After testing. The compressor was dismantled for evaluation, and we bought the engine. Engine is mounted on a sturdy pallet. And we will build a crate around it for shipping. Shipping weight 1200 pounds in wooden crate. Shipping size 48X40X48 inches.
|
|
|
This came off Wisconsin motor. I have more parts for sale. Will combine items to help you save in shipping. WISCONSIN MOTOR CORP No serial number but casting on motor is BA-54 LM268 BX Posted with
|
|
Antique Vtg 1929 Maytag 92 Single Kick Start Washing Machine Engine Hit& Miss Runs via squirt bottle. See video here, Serial number 379366. Appears to be complete minus the kill pull rod. Tag has a dent. One apparent chip in fin. Small piece of the kicker guard mounting foot missing. Shown. See my other engine auctions. I will be listing several antique engines over the next several weeks. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see my other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. We combine ... moreshipping when possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved. International Buyers Please Note: Import duties. Taxes and charges are not included in
|
|
Antique Vtg 1948 Maytag 72 Twin Kick Start Washing Machine Engine Hit& Miss Nice engine. Runs via squirt bottle. See video here, Serial number 163528X. Appears to be complete. With mounting plate. Has one original Maytag spark plug. No apparent breaks or repairs. See my other engine auctions. I will be listing several antique engines over the next several weeks. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see my other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. We combine shipping when possible. ... moreRemind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping
|
|
Antique Vintage 1930 Briggs& Stratton FH Engine Kick Start Appears to be complete. Eng. No. 103904. Engine does turn but the valves are stuck so I did not turn the engine completely over. As not to damage the valve train. No apparent broken fins. The kicker is free but the chain is froze. Nice shroud and tag. Carburetor butterfly and mixture screw move freely. This will be extremely well packaged. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see my other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. ... moreWe combine shipping when possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved. International Buyers Please Note: Import duties. Taxes and charges are not inc
|
|
|
Westinghouse Gas Engines. East Pittsburg Pa. That is not mis-spelled.Pittsburg. They lost the letter h on the end for a time. Old. Not a copy. 66 pages. The catalog is in good condition or better. Well illustrated and rare catalog. $5.60 shipping in USA. Will ship anywhere. Ship in USA for $5.00 Will ship anywhere. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1404c53528c-0x104-
|
|
|
Brons oil engines. 1912-13. Old. Not a copy. Written in Hungarian. A minor problem with Google. 24 pages. The catalog is in good condition or better. Well illustrated and rare catalog. $5.60 shipping in USA. Will ship anywhere. Ship in USA for $5.00 Will ship anywhere.
|
|
|
Overall good shape. Cover has some staining, and the center page is loose. Some stains, smudges in the interior but still good useable manual. Note it has the previous owners serial number and motor number hand written in it. If you have this Roadster in the manual. This manual would be a real find! Chassis# 1-612628 Engine# 11590 Roadster 2 Date purchased: 4-26-1972 Info is written in pencil. Rupp mini bike. Minibike Posted with
|
|
|
A stunning example of a rare toy engine. With the original box. Dayton Vacuum Rotor. Alcohol engine. Original and almost flawless condition. Untouched. Slightly used long ago and returned to the original box. Clearly. It was stored in dry place for many years. As found. As good as they get. Literally, I've owned a few of these and this is the best one I've seen. I will ship this anywhere for cost.
|
|
|
Old mower that I'll try to box if necessary. Best to pick up. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1404c53527d-0x105-
|
|
|
Cheap old Iowa-built engine not stuck paint nice. Needs gas cap. Posted with
|
|
|
This 4.5"by 3" brass tag is in good used condition and is unpolished and in as found condition. Free shipping on this item
|
|
Here is a"previous owner refurnished" small engine made by Clinton. Type according to the engine data plate is A2100. It has the recoil start(cover reads Fairbanks Morse) Overall I would say it is in ok condition. It does spark, tank is dry and ok, has the correct Clinton carburetor and air filter and should run with hardly any effort. I can't really vouch for the correctness of the tank, it looks it belongs there and the cut outs at the mounting points are also correct. The is a weld at the bottom(see picture) but it seemed well made. The muffler is one of the aftermarket reproduction pieces. It weighs approx. 22lbs w/o packing. I will drain the oil and can pack properly for shipping. Pickup in the N.GA mountains is ok. Most likely I will ship with FEDEX home delivery service. ... moreSo the indicated shipping price is just a estimate. Please wait until I send you the correct invoice after the end of the auction, when I have your ZIP. I will list a couple more small engines(Maytag. Clinton. and parts over the next couple days and weeks to clear out some of the space in my garage. As always. Questions are welcome, but not 5 minutes before the end of the auction.
|
|
|
For parts or restore. Rare. Hard to mind motor. I did not detect any cracks, or breaks to cast iron head. You get what you see in pix. Shipping will be based on 65 lbs. See rate calculator for quote to your zip
|
|
Here is a little. Well known Briggs& Stratton engine. It is the 5S type and according to the serial number it is made around Dec/1953. It was refurbished by the previous owner. Has good spark and seems overall complete and ready to go. The tank is dry and clean(minor surface rust probably due to humidity, nothing serious) Has a pulley cover(made in Hagerstown/Indiana) which actually slides on the shaft. Don't know if this was done to accommodate various belt sizes, haven't seen too many with those. The shroud is undented. It appears one of the carburetor attachment bolts was broken off. So carb is held in place with only to bolts. The color of the crank case is obviously not original black, but it is easy one the eyes. It also has the correct oil bath cleaner and the original steel ... moremuffler(not the thin chinese reproduction) Would be a nice donor for some vintage gocarts, or to get the youngens into the engine hobby with something easy, light weight and not"the boring black" paint. It is mounted on a board and weighs complete approx. 38lbs. I will drain the oil and can pack properly for shipping. Pickup in the N.GA mountains is ok. Most likely I will ship with FEDEX home delivery service. So the indicated shipping price is just a estimate. Please wait until I send you the correct invoice after the end of the auction, when I have your ZIP. I will list a couple more small engines(Maytag. Clinton. and parts over the next couple days and weeks to clear out some of the space in my garage. As always. Questions are welcome, but not 5 minutes before the end of the auction.
|
|
|
Up for auction is a vintage Tecumseh engine. This is a vintage engine that is hard to come by. I was told by the prior owner that this is from a Rupp mini bike but i can not guarantee this. This engine is either a 3.5 HP or 5 HP but not certian. It turns over with good compression and has plenty of good parts. Missing some parts as seen in the pictures. Comes as pictured. As is. Please feel free to ask any questions. International shipping is available. Please email for a quote. Good luck bidding!
|
|
|
Nice kick start Iron Horse engine. Does not seem to spark but i'm sure it's an easy fix. Look at the pictures and i'll answer any questions that I can. I'll ship for actual cost from 05647. Local pickup prefered. But if I ship it i'll drain the oil. Pretty heavy 50+ pounds. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14052edc411-0x107-
|
|
I am offering a vintage and rare Essex hot air engine. These engines were used to drive store displays. Peanut roasters and dentists tools(so I have read) Stamped on top is"ESSEX PAT MCH 24 1903. It is mounted on a crudely cut piece of wood with a hole for applying heat to the furnace. Some of the furnace insulation is missing and as you can see from the photo, the furnace wall has rusted through in a couple of locations. Otherwise, the engine is in very original condition and runs great. You can see it run at using a propane torch for heat. These engines may have come with a small kerosene container and heat source. This motor does NOT have that feature. The motor with board weighs 14lb and is approximately 20" long and has a 6" flywheel. Let me know if you have any questions. ... moreThanks for looking. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14052edc41d-0x101-
|
|
Here is a vintage Briggs and Stratton engine. Badged and probably sold as and by Sears as Model 500. I believe they resemble the WMB or WM line from Briggs. It is an older restoration. Where the previous owner didn't agree with Henry Fords color selection philosophy. The block, head, carb and flywheel is painted red. It is the kickstart model, which also places it in the washing machine application like so many others, such as Maytag, Iron Horse, Continental. The shroud is not rusted. Has a couple minor imperfections, but is far from being a"repainted, beat up piece of sheet metal" The pot metal carburetor(mixer) is also in good condition. Nothing broken off. You can see that the tank is not original, however, it is very clean on the inside and somebody went through great length ... moreto made an adapter plate which a) closed the carburetor hole for the previous application and b) to adapt the check valve and fuel line. The engine sparks and probably only needs some gas to fire up. The governor linkage is also there. The muffler is not here. Many substitute these aftermarket repro muffler, commonly available for a couple bucks. It is mounted on a piece of plywood for storage and display, however, I will remove for a more compact packing. Overall. This is a nice little engine, a step away from the boring black, but maybe that will attract some youngsters or a collector who wants to freshen up his line of 50 or more black painted engines. I will drain the oil and pack properly if it needs to be shipped. The engine weighs approx. 35lbs and I will ship this most likely FEDEX ground. Payment during pickup in the N.GA mountains is welcome.
|
|
Vintage 1950s Kohler K90 R Gear Reduction Engine Tiller Wheel Horse Tractor Runs via squirt bottle. See video of it running above. Rope start. Model K90 R, Serial#340918, Spec#2704D. 3/4" shaft. 2" long. Spark plug wire needs a new clip end. Oil bath air cleaner is cracked. See my other engine auctions. I will be listing several antique engines over the next several weeks. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see my other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. We combine shipping ... morewhen possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved. International Buyers Please Note: Import duties. Taxes and charges are not included in the item p
|
|
|
old single cylinder 4-stroke engine of unknown brand. Block only. Not complete. Not running.
|
|
You are Bidding on a Witte Dieselectric 12HP Oil Field engine. It is a Model MD Serial Number D17013. I had this running briefly a couple years ago by injecting fuel in the breather. What a beast! Unfortunately over the winter the plug allowed snow to build in the hopper. Melt and then freeze, cracking the head. I don't have pictures of the cracks at this time but I will try to add them soon. I don't think they would be to hard to weld and I haven't taken the time to look for a new head. The engine is on a home made trailer as seen in the pictures. Trailer has 2 Bulldog Jacks and a 2" hitch. Lights probably need rewired. I wanted this to be the center of my collection but I dont forsee having the time or money any time soon so it needs to go. I reserve the right to end this ... moreauction early as I have this for sale locally
|
|
|
A really nice International Harvester Type L magneto. This mag fits the IHC M engine. There are no cracks. Breaks or welds to be found, except for the bolt mount on the bottom of the mag(as pictured) but this shouldn't be to hard to fix. When you spin the shaft, you can feel the impulse of the magnets working. If you have any questions, please let me know. Posted with
|
|
|
Lot of 2 Delaval drip type hit miss engine oilers. They are 2 inches in diameter. Glass in good shape with no cracks.
|
|
The Murphy HC-9040 Ignition Powered Panel Tester allows you to test your panel for short circuits and insulation leaks in sensor leads or panel wiring. The tester provides 160 to 180 VDC–nearly simulating ignition voltage and current conditions. The current-limited output provides sufficient current to operate TATTLETALE® annunciators(mechanical and digital) and fuel gas valves. The HC-9040 is designed for testing Murphy Ignition Powered Panels incorporating 307PH-CD. LCDT, MARK II or IV Series TATTLETALE® annunciators and M25-CD or M50-CD Series fuel gas valves. The HC-9040 can test digital tachometers and loop monitors applied to negative ground CD ignition systems. Contact Murphy for more details. The HC-9040 connects to the panel’s terminals by means of clip leads. This operation ... morecan produce a spark. Therefore the tester is to be used only in areas where there is no danger of ignitable gas mixtures. WARNING: Do not use Panel Tester in hazardous locations where an ignitable mixture of gases may accumulate. The HC-9040 has two modes of operation: 1) apply 160 to 180 VDC for component operation testing; 2) indicate short circuits by making the lamp glow brightly or glow dimly to indicate insulation leakage. Power Requirements: Four“D” cell 1.5 V batteries–6 VDC total(DURACELL MN1300 batteries are recommended) Output Voltage: 160 to 180 VDC. Relative Humidity: Operates up to 95% relative humidity under conditions of no condensation. Power On-Off Switch: Turns battery power ON or OFF. Bright glow of lamp indicates short circuit; dim glow indicates insulation leak. Positive Output Terminal: 160 to 180 VDC output for use in testing component operation. Common Terminal(COM) Common return for either output circuit. Insulation Test Terminal: DC output in series with lamp to indicate short circuits or insulation leaks. I only used this for a couple of years then I got out of the gas compressor industry. this cost over 1000.00 new. I'll send operating instructions with it.
|
|
|
McCormick Deering m 1-1/2 hp cam grease cup. This is old and original so sold as is Thanks for looking please check out my other auctions. Posted with
|
|
Good Engine To clean up and run. Everything Works! Has good compression. Pull start works. I took a picture of the spark while pulling the rope start. Recoil works. The spark is in the last picture. I had trouble timing the pulling with the camara shutter I blocked some of the spark and it is blurry from moving in a slow shutter. It can still be seen in the last picture. Has a good clutch which is included. The clutch housing has a shaft that could have a gear attached if wanted. The clutch shoes have little wear. The rope start is imbossed with an insignia and the words FAIRBANKS MORRIS. Carburator is a tillotson double diaphragm with the number HL15A on it's base. Schroud has the cut off switch. Good muffler. Good air cleaner. Throttle linkage returns by spring action. No broken fins. ... moreThere is no tag on the engine. Engine is exactly the same size as the 5800 engines. I have a few mounting bolts to go with it. Should be a nice looking engine when cleaned up. Has all the features. Good luck bidding. Thanks in advance! FYI. E-Bay pulled this listing 3 days after I listed. Because I put 2 Brand names in the title. The other was West Bend which I am not sure this is a West Bend because there is no ID plate. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140615daa22-0x106-
|
|
BOOK TITLE: Single Cylinder Engine Service Manual AUTHOR: Kohler Engines CONTENTS: Covers the following models: K91, K141, K161, K181, K241, K301, K321, K341, With sections on: Operating instructions, Lubrication, Air intake, Fuel. Fuel system, Governor, Ignition, Electric starting- charging, Retractable starters, Inspection- disassembly, Reconditioning, Reassembly, Special fuel systems, Modifications, Specifications DESCRIPTION: Softcover Book. 1981, 50 pages CONDITION: The book is in good condition inside with cover rubs. SHIPPING: $3.28 Media Mail(1-2 weeks) shipping. Priority Mail(1-3 days) shipping cost can be given if requested. FYI: I ship on Monday. Wednesday, and Friday when payment is received by 6:00 p.m. the night before. INTERNATIONAL SHIPPING: Please contact me for international ... moreshipping rates. PLEASE CHECK OUT ALL OF THE TECHNICAL BOOKS I HAVE ON eBAY AND IN MY eBAY STORE DISCOUNTED COMBINED SHIPPING IS AVAILABLE ON ALL OF MY BOOKS!
|
|
|
Vintage Champion Ford Spark Plug- A 25 In Box Auto Lite Became Ford Brand This Spark Plug Was in the Vintage Ford Motor Company Emergency Kit Tin-Listed for $75.00 Please Look at Photos Box missing Flap on Bottom All Shipping on Tuesdays
|
|
You are bidding on a wonderful VINTAGE RESTORED 1946 MAYTAG STATIONARY ENGINE. This engine is really beautiful. It was gone over from head to toe. It has cloth wrapped EISEMANN PLUG WIRES AND NEW PLUGS. The engine was tested to be fine. The original gas tank was cleaned. The paint and decal is good and there is no damage. Flywheel is solid and has no cracks. Because of the age of this engine I am selling without warranty. The collector I purchased it from said it worked fine and in checking it over I see no reason why it shouldn't. It has compression and spark. It's a super nice twin cylinder MAYTAG for your collection! If you have any questions. Please contact me. Please check out my other listings. We buy a lot of households and get quite a bit of unique and rare items. I will do ... moremy best to keep shipping costs down on multiple items and will combine shipping when feasible. If you like what you see please add us to your favorite sellers list. Thanks folks!
|
|
Maytag Model 92 Multimotor Heritage Matters Many of you have bought stamps and other collectibles from me as" clockmanjohn. I have changed my user id to"heritage-matters" because it more accurately reflects what I am doing on e-bay. But I am offering the same sort of items, with the same passion and attention to detail as ever. The change reflects the fact that I am offering matters of heritage, because heritage does matter! MAYTAG MULTIMOTOR MODEL 92 GOOD ORIGINAL CONDITION THIS IS A GUARANTEED GENUINE MAYTAG MULTIMOTOR MODEL 92 HIT-AND-MISS GAS ENGINE. The paint. While far from perfect, is original, as are the decals. It is serial number 372442, which would have been produced between July 1 and September 30, 1929. This motor was well taken care of. In the estate from which ... moreI bought it. It was in a wood-working shop, no doubt kept as a curiosity. I cleaned the sawdust, remove the gas residue from the tank, cleaned the spark plug and carburetor(and replaced its gasket) The needle valve is in good shape, still sharp. I have run it several times; of course, I do not guarantee that it will start the first time or every time, but I had it running well. My grandmother had a Maytag with one of these engines, and after her death, my father removed it and ran a pump sprayer with it, so I know a little about how temperamental they can be. There are some stress cracks in the retainer ring just inside the pulley(see photos) I normally offer next day shipping. But will be unable to do so with this, especially if I have to crate it up. About shipping: free for pick-up, and I can hold it for a considerable period if paid for in a timely fashion. I will personally deliver FREE within 50 miles of Zip Code 20601; I will deliver it for a flat fee of $25 within 100 miles of 20601, and for $50 within 150 miles. Beyond that, it will have to be shipped either UPS or FedEx. Shipping weight will be 70 pounds. I sell all mechanical and electrical devices in technically"as-is" condition. As old items can get damag
|
|
|
You are Bidding on Vintage 2hp Tecumseh Case Delyxe Recoil Start horizontal Engine with Clutch. Sprayed Fuel in Carb Started right up, No breaks or repairs,has real good compresson nice and clean inside and out oil nice and blue, Mini-Bike- Go-Cart, I found this setting in old barn I was told it was off old Go-Kart out of the 50s, numbers on Tillotson UpDraft Carb E4A, No numbers anywhere, On fan cover reads in red letters CASE on decal reads Delyxe 2hp, All Fluids will be drained.
|
|
|
You are bidding on a nice original inspection cover. For a Maytag 92 engine. Feel free to ask questions. Will combine shipping on items IF possible to save you money. Good luck and happy bidding!
|
|
|
You are bidding on a very nice. Brass Oberdorfer water pump. I have used this pump and it works great. This would be perfect to circulate water through a tank cooled engine. Don't waste money on a cheap china made pump. This is a very old, U.S. made pump. Very nice quality, and ready to use!
|
|
|
This vintage side shaft motor has great compression. It was pulled off a Jacobson golf mower. It wouldnt take much to restore the motor. If you would like parts off the mower please let me know. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14079ddcf12-0x105-
|
|
Up for your consideration is a old used Maytag Model 72-D Washing Machine Motor. This is a old barn. The motor turns over freely. Has Spark Plugs but the porcelain is broke. Foot start looks good along with flywheel. A small piece broke off on one of the fins. see last photo) Not sure if the unit was repainted at some point or not. The foot start will be removed and packed in for shipping purposes. Please understand that this item is selling"as is" for parts or restoration. Please view the photo's closely for best description as well as the condition of the items before bidding. Simply contact me with any questions you may have. Enjoy Bidding and Thanks So Much For Looking! I deal in Vintage/Older items and describe them the best I can. On occasion there may be minor imperfections ... morethat I have missed. Tom Borgstrom(The Vintage Tradesman) MY SHIPPING POLICIES-Refunds are accepted if item is not as described. Shipping's fees will not be refunded only your bid price. If you are not happy with your purchase please email and I will do my best to work things out to your satisfaction. I will be happy to combine shipping to save on postage. I do my best to ship within 2 days after receiving payment. Delivery times depends on your zip code and shipping method. Pay securely with any major credit card through PayPal! Visa MasterCard Discover American ExpresseCheck INTERNATIONAL BUYERS. Please read shipping statement below before you bid. Once the item is shipped I can not guarantee out of the US shipping and can not guarantee how long it takes to arrive. I can not give refunds or replace any item shipped outside the US. Please understand that shipping overseas can become complicated
|
|
|
Vintage Olds Seager Engine Works Gas& Gasoline Lansing Michigan Hit and Miss This is the real one no reprint here- Type A Engines- great photos- cutaways- testimonials- practical use- ignition system- governor- air cooled- the bad thing is the pages in the middle are loose and it's missing page 23 to 26- some soiling- still a bunch of great information and photos. Measures about 7" x 10" You will receive what is pictured above. PLEASE ASK QUESTIONS or If More photos are needed please let me know. All USA packages will have tracking- which is added into the postage- I DO COMBINE SHIPPING. For savings to you. You will recieve your Tracking Number upon request. Overseas: your shipping starts a $6.60 and goes up from there.
|
|
Antique Maytag Engine~~~"CHOICE OF ONE"~~~ WILL SHIP NoRes- VINTAGE- Maytag Engine I Have Not Played with Any. Only 2 Are Froze Up,All Need Tinkering I Have Engines to Sell. I Am Selling One Engine. Winner Gets Choice,Yes Winner May Buy 2,3 or All Yes. I Will Ship,To A Business Address for $50.00 Per Engine If the Winner Buys Many. These Will Be Shipped on a Pallet I Will Ship in the Continental U.S.A Wa tch"Andersonhom" On e B a y. Bid Often& Good Luck! If this is your First Auction. We will do our best to help you get through this with a Positive Experience! We Try to find the Best Items to List for your Bidding Pleasure.Please Bid wih Confidence and Most Important Have Fun. Payment must be received within 4 days of auctions end or a non-paying alert will be issued. ... moreI understand that circumstances do arise and therefore would expect e-mail communications if there are any problems. THANKS FOR VIEWING THIS AUCTION AS ALWAYS WE LOVE TO COMBINE SHIPPING. We ship with in 2 business days. We strive to describe items we are auctioning as accurately as we can. Should you ever purchase from us and find we did not do so. Please let us know so we can continue to improve. We will usually ship within 2 business days of receiving cleared payment. Return policy details: If an item is found to be incorrectly described in a manner as to be considered materially deficient. We will gladly accept the return at our expense. We realize that on-line shopping is a difficult experience and try to be fair to our customers as well as ourselves. Thank you Marcia& Myron HI. We are Myron and Marcia Our main goal is to make people happy with their purchase and we pride ourselves on our fast shipping. We try very hard to treat other people the way we would like to be treated. EBay is a great hobby. There are many very nice people in the Ebay Community! Thank you for stopping in and have a Great Ebay Day! Email with any Questions you have. We will try to answer all of them. We want only Questions about the item, Tha
|
|
Antique Vtg 1928 Maytag 92 Single Washing Machine Engine Hit& Miss Watch a video of it running via squirt bottle above. Serial#313353. This one has the screen and brass ring air filter. The spark plug wire just needs a new clip end. This engine has its Maytag spark plug but the tip is missing. See photo. Is missing its tag and kill rod, easily replaced. No apparent cracks, breaks or repairs. See my other antique engine ads. I will be listing more over the next several weeks. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or a pet free home. Please see ... moremy other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. We combine shipping when possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay experience for all involved.
|
|
|
Cast iron toy Fairbanks Morse engine. The paint is about 75% And the flywheels may have been repainted,but I don't see any breaks or repairs,It's a great shelf item or shop item( depending on your wife) And has lots of patina.Ask questions if you got em. USA addresses only,Thanks for looking!
|
|
Pair of approximately 1937 Hummer model E2 engines running Montgomery Wards battery chargers or generators. Mounted on a homemade 2 wheel wheelbarrow type cart. Both engines have been restored and run. Although they are a little tempermental and may need a little tinkering to get running. Green Engine specifics: Model E2 Horsepower 5/8 RPM 1750 Serial E2H20194 This engine is a direct drive generator with a cast iron base and a tin gas tank(repaired) beneath engine and generator. It has a 6 volt battery and coil ignition system. Has points in the housing on the end of the crankshaft. Has a foot pedal for starting that doesn't work well so I start it by wrapping a pull rope around the pulley. The generator has been cleaned up and seems to charge. But I'm no generator expert. There are ... moresome neat little knife switches next to the ampmeter to turn charge on anf off and to start or stop the engine. See it run here http:www.youtube.com/watch?v=-CrV3qC9ves and here http:www.youtube.com/watch?v=OHTLpToaRpk Red Engine specifics: Model E2. Bore 2-1/8 Stroke 1-3/4. RPM 1750. Serial E2B3078A. This engine is a belt drive generator with a cast iron base that also serves as the gas tank. It has a direct drive magneto ignition system on the end of the crankshaft THAT WORKS! Has a foot pedal for starting that works good. It has an old repair to the crankcase that was repaired before I got it that does not affect operation at all. This one does smoke a little. The generator has been cleaned up and seems to charge but is not wired up to charge batteries. See it run here I have totally disassembled. Cleaned and reassembled both of these engines myself. I built the cart from salvaged materials and new wood. I don't think you will find a better pair of Hummer engines anywhere! I am also including a tote with all my spare parts including 2 carbs. 2 blocks, head, shrouds& tins etc. Local pickup preferred. I will not ship. If you want to arrange shipping and pickup. I will strap to a pallet and load on a truck for an addit
|
|
|
SELLING HERE IS THIS OLD LAUSON GAS TANK ALONG WITH LINE AND FILTER. THE TANK IS IN GOOD CONDITION WITH WORN AND MISSING PAINT FINISH. IT HAS A BIT OF MINOR RUST. ONE OF THE ENDS HAS A SHALLOW DENT IN IT. THE INSIDE LOOKS QUITE CLEAN. I HAVEN'T CLEANED THE TANK. AS FOUND AT A LOCAL FARM SALE. THE LID FITS GOOD. MEASURES 8.75" X 4" WEIGHT 30 OZS. PLEASE EMAIL WITH ANY QUESTIONS. THANKS AND GOOD LUCK!
|
|
|
Man 450 horse power running takeout. This is a high hour running takeout. Engine has about 10.000 hours, but was still running excellent when removed from boat last winter. This engine is over due for after cooler and heat exchanger maintenance, but was a great runner. No smoke. Engine comes with computer, harnesses, and a set of gauges. Sold as is.
|
|
VINTAGE BRIGGS STRATTON 14FB SIDE SHAFT MOTOR 5 HP HORIZONTAL ENGINE UP FOR AUCTION IS A BRIGGS& STRATTON 14FB HORZINTAL SHAFT ENGINE. I THINK ITS 5 H.P. DOES NOT RUN. IS NOT LOCKED UP. TURNS FREELY. LOOKS TO BE ALL THERE. THE MOTOR WEIGHTS 78 LBS. SEE PICTURES FOR MORE DISCRIPTION. PICK-UP IS AVAILABLE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK. We except paypal payments only. Buyers are asked to remit payment within 7 days of auction end. International buyers are responsible for paying applicable duties and/or taxes upon reciept of shipment. I will gladly refund the purchase price of the item less any shipping charges if I have misstated anything about the item in the discription. Please contact me before leaving feedback if there is any concerns or problems with the item once you recieved ... moreit. Contact us by clicking on the ask seller a question icon located on the top right side of this listing.
|
|
VINTAGE ORIGINAL BRIGGS& STRATTON ENGINE Markings on the engine: Pat'd 9-21-28 Milwaukee. Wis. U.S.A. Model- FH Eng. No. 85863 By the handle- 87851 On the handle- 87781 Bottom area- 67351(looks like a 3. Not sure) Straight finned engine. 1/2 hp. Levered/chain pull start. stroke- bore 2.25. OHV. Pot metal carb. Magneto ignition. 2- cast iron flywheels. Blower housing. May have dings/dents/scratches from normal use. Non-running. But not locked. All fluids will be drained for shipping purposes. Please remember to refill them before trying to start engine. Check out my other items! If it is a part I am selling it may fit others. Check with a dealer. Please be thorough and ask any and all questions before you bid. Check all pictures. Payment is due within 4 days of end of auction. All sales ... moreare final and absolutely no refunds will be issued. Items are sold as is/ no warranties. As with any item used. It may need a cleaning/servicing. Please remember you are bidding on used merchandise, not new!
|
|
|
this is a nice piece.the paint is good. the tires are weather cracked but they hold air. the sheet metal is perfect.it comes with the diggers attached and a brush cutting attachment that is in the pics.it has a small briggs engine on it that is not stuck.the POWER HO is ready to go to work in your garden. i will hold for pickup.Haul to the steam o rama the 2nd weekend in sept at republic mo, or ship thru fastenal. call with questions. 417 388 0632 buyer pays ACTUAL shipping.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1408509821a-0xf5-
|
|
Up For Bid: Lot of 2 Hit& Miss Engine Trucks Wheels Cast Iron Flat Belt Pulley(VBX) 1.5" wide x 8" in diameter with 5/8" diameter inner hole. Each one dirty from signs of being used Please email with questions Picture is of exact items you will be receiving Please email with any questions PRIOR to bidding. Payment Details: All payments are expected within five days of auction close. After four days unpaid bidder cases are automatically opened. Please e-mail for means of payment other than Paypal. For PA buyers all items that are not coins or bullion will be charged 6% PA sales tax unless you have a valid PA tax ID number. unless you have a tax ID number. Shipping& Return Details: All items are shipped within 1 business day of auction close. We combine shipping on all ... moreof our sales. For flat rate shipping an additional.50 per item will be charged. For combined shipping on calculated shipping please email us. If for some reason your invoice does not reflect combined shipping please email us and we will fix it. In order to protect both parties from scams. W e will only ship to the address that is on file with Ebay. The only e xception to this is if you have a PO box on file and the item must be shipped UPS due to size. We offer a 14 day return policy on all of our auctions. Unless the auction states otherwise. Except in the case of misrepresentation return shipping must be paid by the buyer and the original shipping cost will NOT be refunded. Please contact us prior to making a return. All coin and token s that are returned m ust be sealed in their original holder. Any coin or currency returned that was originally shipped with f ree shipping will have the original cost of shipp ing deducted from their refund. International Buyers: We welcome international bidders. All packages weighing 4 lbs. and under will be shipped via USPS 1st Class Mail International Select. Import taxes. Duties, charges are not included in the item price or shipping charge. These charges are the buyer's responsibility
|
|
|
nice ottawa log saw and buzz saw. i have the buzz saw and the cross cut attachment as well.it has a AEH. think briggs engine.this is a good looking rig.i think a little time and a soft touch she would run. it is complete as far as i know. i can hold for pickup.Deliver to the steam o rama in republic mo the second weekend in sept, or i can ship thru fastenal. buyer pays ACTUAL shipping. call with questions. 417 388 0632.
|
|
|
two wright saws.one money. the good one is a nice saw. i have not run the saw but i believe a tune up and you could head to the timber.i will hold for pickup.Deliver to the steam o rama in republic mo the 2nd weekend in sept, or ship UPS. i doubt it would cost much to ship. buyer pays ACTUAL shipping costs. call with questions. 417 388 0632
|
|
|
Very old Stover vertical hit and miss engine. No serial number found but dates to the early 1900's. Because many original parts were missing a man converted it to a propane vertical side shaft engine and it runs well. Could be converted back to original if parts were found or made. It is on a nice old cart that goes with the engine. Battery. coil and propane tank are included. Shipping would be up to the buyer and it can be stored inside as long as it is paid for when sold. NO PAYPAL on this engine and a personal check or postal money orders are fine. Questions are welcome also. I am showing shipping as free but it is up to the buyer to pick up the engine or pay for all shipping costs.
|
|
|
Hi I have up for sale A ORIGINAL 2 PIECE BELT PULLEY FOR A FH OR FI BRIGGS AND STRATTON GAS ENGINE. This belt pulley is in good condition. It goes on the governor side of engine. You don’t see these come up for sale very often so don’t miss out. Please check out pictures. Payment must be received with in 3 days after auctions. I will try and answer any questions you might have. I ONLY SHIP TO A USA ADDRESS ONLY. NO INTERNATIONAL SHIPPING. NO SHIPPING TO ALASKA OR HAWAII. Thanks for looking.
|
|
|
Three count Empire. Alamo gas engine books bought for a friend didn't want see as one piece
|
|
|
Vintage early 1900's Embossed book cover! This could have been for a parts catalog or instruction manual I am unsure. From the Filer& Stowell Company. Milwaukee, Wisconsin. Hunter Green Beautiful Scroll Detail! would make excellent framed decor for any collector! Found in my Great Aunt's estate, My Uncle loved Stationary engines and steamers. I would like to pass this on for someone to treasure as he once did. From my smoke free home. Shipping will be $2.00 for buyers in the US. Please view my other listings for more great finds! Combined shipping for buyers of multiple items.
|
|
|
hance vac-a-way seed cleaner. this is a really nice fanning mill. it is a small one.it comes with 2 extra screens and a grain chute. the only thing wrong with this mill is a small piece of wood is splintered off on the back sice. i have the piece and with some wood glue and some new trim nails it will be fine.it has quite a bit of original pinstriping on it. i can hold for pickup.Ship thru fastenal, or deliver to the steam o rama at republic mo the second weekend in sept. call with questions. 417 388 0632
|
|
|
2 cyl NOVO power unit. kinda rough. this engine is stuck and the sheet metal is not the best. it has a nice mag. i would call this a parts engine.i will hold for pickup.Deliver to the steam o rama the 2nd weekend in sept at republic mo, or ship thru fastenal. call with questions. 417 388 0632
|
|
|
This is the small 4 bolt head rare Lawson engine for collectors. My dad used to show and run this engine.It is military issue and could be WWII or Korea vintage. It turns over fine and has always been sheded. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-140a13a3a95-0x101-
|
|
|
You are viewing a vintage Maytag. Hit/miss gas engine. It is possibly a 92D single cylinder engine, based on the serial number of 64323. The 72D chart does not have SN numbers that are similar to this as the 92d chart does. It was possibly manufactured between June and July of 1935. The engine was last started in the early 80's when it was given to my husband by his father. We do not know if it is still operable. It is being sold AS IS and is a local PICK UP only. Once PayPal payment has cleared. Please view our other listings of vintage engines. Parts, and accessories. Thanks for stopping by ptcaresher. Posted with c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-140a13a3ca9-0x100-
|
|
|
Maytag Twin Cylinder Gas Engine 72 D SN 152048(Dec. 1947) The gas engine you are viewing Has been in the family for many years. My father passed it on to me back in the early 80's. at that time I was able to start it but have not operated it since. So I do not know of its functionality. The engine is being sold in AS IS condition with the PICKUP only offering. This listing must be prepaid and cleared, via PayPal, prior to possession. Feel free to ask questions and thanks for stopping by. Posted with
|
|
|
Heres a neat old sales brochure with several models of the Ottawa saws. Its Original Check my other auctions for more like this
|
|
|
You are Bidding on Vintage Lauson Model#55AB-613 Rope Start horizontal Engine Sprayed Fuel in Carb Started right up. Original Plastic Oil Filter Original Muffler, No breaks or repairs,has real good compresson I found this setting in old barn All Fluids will be drained.
|
|
|
Was taken off an engine with a bad block bearing. Please make sure you have the same type injectors. Fits 3TNE82 and 3TN78 and 3TN75. call(931)492-0316
|
|
|