|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 2" pipe thread for exhaust. 3 7/8" center to center 5-hole mounting. If you decide you don't want it or find another one cheaper, I won't take it back.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
There are 3 strip cover gaskets, intake to carb, carb to block, and the head gasket in this set. We own all the tooling and settle for only the best money can buy. Part: Fairbanks ZD Gasket set. And as always our advice is always free!
Buy It Now
Free Shipping
Condition: Used Location: Onaga, United States
Part #9242 D cast on it. Valves and buttery fly are not stuck. No visible cracks welds or repairs. See Photos!
Buy It Now
$19.30 Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original Cushman cylinder head for a Hit Miss Stationary type Engine. I’m not sure exactly which model this fits. The 2 in the middle going across are 5-7/8”. The threads appear good for the spark plug and the mixer.
0 bids $18.40 Shipping
Condition: Used Location: Holgate, United States
Here is a very nice head for a 1-1/2hp Stover K hit and miss engine. It looks to be in great shape. The valves look and feel good, they have a small amount of normal wear. The mounting hole for the carb is 1-1/16".
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 1 1/2HP Fairbanks Morse Z Spark Plug Engine. Head fits a 1 1/2HP Fairbanks Morse Z spark plug engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 1" exhaust threads.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
Valves look good.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: Gib Head Shaft Key - 1/4 x 1.5. Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy!
0 bids Free Shipping
Condition: Used Location: Lempster, United States
It has (4x) bolt holes. Hole Locations: 3.25" center to center.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original HEAD with VALVES for a spark plug 3hp Fairbanks Morse Z throttle governed, Hit Miss Old stationary type Gas Engine. The exhaust port threads are in fair condition.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 1HP IHC Famous or Titan Hit Miss Engine G7536. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 3/4" pipe thread for exhaust. 2 1/4” on center bolt holes for carb mount.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
It is the best product I've seen on the market for a wide range of uses on our old hit & miss gas engines as well as auto and light industrial use. It is 1/32 thick. It's a high quality product made in the USA.
0 bids Free Shipping
Condition: Used Location: Campbellsport, United States
I HAVE FOR YOUR CONSIDERATION AN CYLINDER HEAD FOR AN ASSOCIATED 1 3/4HP HIT MISS GAS ENGINE. THIS WOULD BE CORRECT FOR THE HOPPER COOLED OR AIR COOLED MODELS. THE HEAD IS IN GREAT SHAPE THE VALVES ARE STILL TIGHT IN THE GUIDES.
0 bids $16.85 Shipping
Condition: For parts or not working Location: Lockridge, United States
I have for sale a cylinder head for a 3 to 5HP IHC throttle governed engine. The part # is hard to read but I believe it says 9178D. The spark plug threads are in very poor condition, may be possible to get a heli coil???.
0 bids $10.00 Shipping
Condition: New – Open box Location: Campbellsport, United States
Let the pictures provided be your guide. Location: TW1R.
0 bids $37.50 Shipping
Condition: For parts or not working Location: Lockridge, United States
Piston and rod removed from a 3HP Associated hit & Miss engine. Piston diameter is just under 4 1/2” No Babbitt bearings. Wrist pin and bushing seems good. No piston rings. No breaks or welds that i can see. There is a few “nicks” and scratches on the piston skirt but I don’t see it being to big of a issue for a engine that’s over 100 years old. Please see pictures for the absolute best description. This item is old, used, has wear, and sold as is. Thanks for looking.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Part No 4N3. Here is an original head for a Fuller Johnson engine. Looks to be in great shape and ready to use. Check out the pictures and see if you need it. The valves seem to fit very nicely with only minimal wear.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 3HP IHC Vertical Famous. 3” on center bolt holes for igniter valves. I HAVE 3HP VERTICAL FAMOUS BLOCK AND FLYWHEELS AVAILABLE. I have been collecting hit miss engines for 35+ years and I am very knowledgeable.
0 bids $16.50 Shipping
Condition: For parts or not working Location: Lockridge, United States
Bare head for a 1 1/2HP John Deere e. All threads look good and usable however the exhaust and where the fuel needle valve goes could be cleaned up a bit for best results. No valves. I don’t see any breaks or cracks. There looks to be a little casting flaw, (air pocket) I am pointing to the area with a pen in the pictures. I don’t see it being a issue and it doesn’t go clear through. See pictures for the absolute best description. Valve seats have some small pitted areas. This item is old, used, and sold as is.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
Part # 3557D. I don't see any breaks or repairs. Butterfly is free.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 2" pipe thread for exhaust. 3 7/8" center to center 5 hole mounting. I apologize for any inconvenience. The water jacket has been repaired in two separate places - see photos.
0 bids Free Shipping
Condition: Used Location: Arthur, United States
0 bids Free Shipping
Condition: Used Location: Orient, United States
Throttle linkage and rod for 1 3/4 HP IHC Mogul. The rod is 21 1/2" long. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
It will need valves & springs.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original 6hp Nelson Brothers model NB Cylinder Head. The bolt pattern is 4-1/4” on center. The rocker stands are not broke, but there is an old freeze break repair on the top as can be seen in the pics.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
1 valve guide is cracked see pictures. Part #6CT1.
Buy It Now
Free Shipping
Condition: Used Location: Onaga, United States
Part #3557 D cast on it. Valves and buttery fly are not stuck. No visible cracks welds or repairs. See Photos!
0 bids $18.40 Shipping
Condition: Used Location: Holgate, United States
It seems to be in good shape and ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. 5 mounting holes, those holes about about 2-9/16" apart from each other on center.
0 bids Free Shipping
Condition: Used Location: Orient, United States
6HP Associated / United Pushrod Guide. Fits on an 1" pushrod. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back.
0 bids Free Shipping
Condition: Used Location: Littleton, United States
Here is an original head for a 1hp IHC Famous or Titan engine. There are no cracks, breaks, or welds on this head that I have found. The valve springs, Valves and seats look good. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 8HP Stover Hit Miss Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. The exhaust valve will move but is tight - spring looks good. The intake valve is loose and will need a new spring.
0 bids Free Shipping
Condition: For parts or not working Location: Holgate, United States
I am sure there are other excuses also but I don't care and don't want to hear them. Here is an original head with valves for a 1-1/2hp John Deere E gas engine. The intake valve fits great in its guide but the exhaust valve has a little play, it should be fine though.
Buy It Now
$18.00 Shipping
Condition: Used Location: Elizabethtown, United States
Head is cracked as seen in pictures. Crack did not push, should be a fairly easy repair.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
$16.00 Shipping
Condition: Used Location: Robersonville, United States
HEAD complete 3 1/2 HP HERCULES ECONOMY Hit Miss Gas Engine not sure of type has repaired crack valve move as should please look at picks. Lower 48
Buy It Now
$17.00 Shipping
Condition: Used Location: Elizabethtown, United States
Pipe will still thread in without problems. Good condition, but has a chip at ex as seen in pictures. Valves are free.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: Gib Head Shaft Key - 3/8 x 4. Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy!
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 2 1/2 HP Alamo / Empire / Rock Island. Fits 2 1/2 HP Alamo. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 1 1/4" pipe thread for exhaust. 1 1/4" carb hole mount.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 1 1/2HP Fairbanks Morse Z Spark Plug Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. Hairline Cracks In Jacket - see photos. 1" exhaust threads. Mounts to engine with 4 bolts 3 7/16" apart on center.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is what I believe to be an original John Lauson 1-1/2hp cylinder head. The 4 x 1/2” bolt mounting pattern is about 3-1/4” on centers. It has 1” NPT threads for the intake and exhaust ports.
0 bids Free Shipping
Condition: For parts or not working Location: Orient, United States
Head for 6HP IHC M Spark PlugHit Miss Gas Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 1 5/8" throttle linkage mounting. 1 1/4" NPT for exhaust. Needs intake and exhaust valves and springs.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original set of International Harvester, IHC, McCormick Deering 1-1/2Hp model M head studs and nuts. They were removed from a spark plug Wico engine. The 2 longer studs are about 3”, and the 2 shorter studs are about 1-3/4”.
0 bids Free Shipping
Condition: Used Location: Carmichael, United States
John Deere E93R bare head for a 1 1/2 hp Model E one cylinder hit and miss engine.Appears usable and in good condition.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: Gib Head Shaft Key - 5/16 x 2.5. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need!
Buy It Now
Free Shipping
Condition: Used Location: Onaga, United States
Part #3557 D cast on it. Valves and buttery fly are not stuck. No visible cracks welds or repairs. See Photos!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: Gib Head Shaft Key - 1/4 x 2. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need!
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 1 1/4" pipe thread for exhaust. Head is in good original condition. 3 3/16" center to center mounting holes. If you decide you don't want it or find another one cheaper, I won't take it back.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 1" pipe thread for exhaust. Valves are loose but will need one spring. Head is in good original condition. 2 9/16" center to center bolt holes.
0 bids $15.00 Shipping
Condition: New – Open box Location: Waldo, United States
This is a recast cylinder head for a 3hp Falk flywheel type engine. It is cored for the water passages as can be seen. It will need to be machined to use but looks like a nice casting to machine. This would be a fairly complex casting with all of the core pieces.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Check out the pictures and see if you need it. The valve heads and seats look great. 2" pipe exhaust, 1-1/4" pipe carb mounting. I am a real person who is easy to find. The mounting holes are about 3-13/16" apart from the next closest one on center.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
There are no cracks, breaks, or welds that I can see or know of. The valves seem to have a small amount of normal wear. The heads and seats look good. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 2 1/2HP IHC MogulHit Miss Gas Engine. Head is for 2 1/2hp IHC Mogul. Has choke plate. No breaks, crack, or welds to the head itself. The muffler is missing the bottom half and the top piece is broken.
0 bids Free Shipping
Condition: For parts or not working Location: Holgate, United States
I am sure there are other excuses also but I don't care and don't want to hear them. Here is an original head with valves for a 1-1/2hp John Deere E gas engine. The valves fit well in their guides The needle valve and jet is missing for the carb.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original HEAD with VALVES for a spark plug 3hp Fairbanks Morse Z throttle governed, Hit Miss Old stationary type Gas Engine. The exhaust port threads are in good condition.
0 bids Free Shipping
Condition: Used Location: New Prague, United States
3 HP IHC M engine cylinder head. For ignitor engine. Has an old repair on the rocker arm stand.
0 bids Free Shipping
Condition: For parts or not working Location: Holgate, United States
Here is an original head for an Associated Chore Boy or United equivalent engine. Its in really good shape but the intake valve guide has been broken. I think it would be a very easy fix to insert a new guide into it.
0 bids $24.00 Shipping
Condition: Used Location: Ceresco, United States
International Harvester mogul 6 hp original cast iron piston with rings. Piston looks to be in good shape no wrist pin. Rings are loose but have been used. A hard to find original piece.. No cracks breaks or welds. Please see pictures for more information and condition. Sold as is. Shipped with USPS Priority Mail.
|
|
|
|