Offered here for auction is very nice. And somewhat rare Brownwall Antique Gasoline Engine. It's in original as found condition, the crankguard was missing, so I purchased a reproduction, and it can be seen in the photos. It has a very nice cast iron muffler, I made some minor repairs, such as, a new needle valve seat, and fuel line, the only thing left that needs to be done is, flush out the fuel tank, which is a cast iron tank, and is part of the base. All the bearing's are tight, and it has great compression. The flywheels run true, and have raised letters cast into them. This engine is fired by a buzz coil and battery, coil and battery not included. The auction starts at $.01 and will be sold to the highest bidder, payment must be made by either a bank certified check, or certified ... morepostal money order within 3 days of sale. Only these two types of payments are accepted. I can store this engine for up to 60 days providing it is paid for, any shipping costs are the buyers responsibility. I know of a few people in New England that attend the bigger shows, perhaps for a fee they would haul it for you, however all shipping arrangements are the buyers responsibility. There are no returns, please ask any questions you may have. Please note* I had to put in an amount for shipping to post the ad, please keep in mind I am NOT providing shipping. Thank you, and good luck.
|
|
|
A O Smith Motorwheel stationary engine with flyball govenor Rare 1915-1917. I have only seen on other like this. It was on a WW1 spark gap generator for a very early ham radio. I know there are a lot of motorwheel's out there. But have you ever seen one of these? It has the also quite rare small National magneto on it. I will Crate this for shipment by FEDEX
|
|
|
Antique Johnson Motor wheel long block. good condition 1920's. I took this engine apart for inspection. The bearings are tight and the cylinders pistons and rods all look ready to use.
|
|
|
this engine is not stuck and free the fuel tank needs to be replaced it is in good shape the mag will need some work i do not have the saw for it every ting else is there local pick up only any quiosions or need more pics please call 507 828 9710 thanks tanner
|
|
This is for an International Harvestor LBB stationary engine. Been rebuilt with new rings, valves and seats ground, mag is hot, has a good original fuel tank on it, no hopper cover, has a good valve cover, that has been repaired with a new oil.drain tube, freeze plugs are good and solid, ran great last year, have not tried to start this spring, but when put away, had stabilizer put in fuel tank, nice little engine, it is a 3-5 horse. This does not include the trucks the engine is on. If you have any questions, please ask. I have marked for local pickup, but, will ship, but buyer has to arrange shipping. Posted with On Mar-27-13 at 11:18:20 PDT. Seller added the following information: IF YOU DO NOT HAVE AT LEAST A POSATIVE FEEDBACK OF 5 OR MORE. DO NOT BID WITHOUT CONTACTING ME OR YOUR BID ... moreWILL BE CANCELLED, SOORY TO BE THAT WAY, BUT DUE TO NONPAYING BIDDERS, AM FORCED TO TAKE THIS ACTION.
|
|
|
Nice old Flat belt pulley Jack Shaft small pulley is 3 inch diameter and 2-1/4 Wide large Pulley is 7 Inch diameter and 1-1/4 Wide shaft is 5/8 Thanks for looking
|
|
|
Dempster 1 1/2 hp Gas Engine for parts or repair; missing piston& rod and ignitor. Shipping costs are approximate. And are the responsibility of the buyer. Please send zip code for exact shipping costs. Also, please feel free to send any questions. We are closed on Saturday and Sunday, but we will respond to any questions when we return on Monday Morning.
|
|
|
Great running 2.2 Isuzu diesel engine 40 hp. It starts right up and sounds strong. No smoke and carries 65 lbs. Of oil psi at idle. The hours are unknown all we know is it runs fabulous. You are getting a complete engine with starter air cleaner and engine mounts. This engine weights 585 lbs on a skid and we will ship or you may pick it up at our address at. 46526 zip code. We have put many of these engines in skidloaders any many other applications. Help yourself and if you have any questions feel free to contact us. Thanks Posted with
|
|
|
This engine appears to have only had test starts and never used on anything. VERY strong comp and I did prime start it and it sounded strong. Selling and shipping to the lower 48 states only. Shipping is a set $20 On Apr-01-13 at 06:23:52 PDT. Seller added the following information: Tag says. AH47 sn-3772601 engine was mounted to a peice of plywood when I got it.
|
|
|
Vintage CLINTON Engine/Motor(Not Boat) SHORT BLOCK(Less: Head. Carb, Gas/Fuel Tank, Shroud) Spins Freely. Probably Rebuildable Core, Flywheel, Block, etc.Intact.
|
|
|
This is a good engine that has less than 6 00hrs. This is a 3TNC78. It will bolt in to replace a 3TN75 and 3TNE82 also. R uns excellent. Lots of Kubota and Yanmar engines to choose from. 931)492-0316 Shipping to a commercial loading dock only. 30 day warranty with BIN
|
|
This is an Original Igniter for Sparta Economy Hit& Miss Gas Engines. This same Igniter fits different Early Models& Hp's. It Is 2 1/2" in Dia& Bolt Spacing Is 1 3/4" This In an igniter that I Have Had for A while. These do Not Show Up For sale very often. It was in Good Condition But missing the springs, I sent it in to Hit& Miss to be rebuilt, They did An Excellent Job. It Had New Mica& Springs installed. Points Are Real Good. Everything Looks new.It is Ready to bolt on& Use! This even Has Both Of The Original Brass Terminal Holders. That Are never there. Excellent Igniter If you Have An Early Economy. Don't Miss out on this one! This Item Weighs 3 LBS! I will Combine shipping.FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. ... moreAs I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e0430619b-0xfc-
|
|
|
IH Mogul 1 hp Gas Engine/Hit& Miss; Engine turns over. Has magneto, muffler and pulley, with a tune up, it should run. Older repaint. Shipping costs are approximate. And are the responsibility of the buyer. Please send zip code for exact shipping costs. Also, please feel free to send any questions. We are closed on Saturday and Sunday, but we will respond to any questions when we return on Monday Morning.
|
|
|
vintage shutoff valves 1/2" od on threads(I think) works fine
|
|
|
I'm selling my maytag 92 engine. It has been TOTALLY restored. It's been completely dismantled. Sand blasted and painted. Put back together with new rings, cylinder honed, crank bearings, and new rod. It also has new plug and wire and the rubber in the wire holder is new. Reconditioned points new condenser. Rebuild carb. And a brass bolt kit, new decals, new model plate, brass pull and plug grounder( not sure its called that but you know what I mean) It's also been mounted on some wood. It runs great. Timing has been correctly set with a fixture. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e0555eec2-0xfe-
|
|
|
For sale is a Wisconsin Engine with frame that used to drive a generator. Generator is missing. But engine runs and is in like new condition. Call 508/561-8404 for details.
|
|
|
This is another engine from my collection I am selling. This engine was made in Clinton. Michigan. This engine starts good, runs good and looks good on the oak frame I make for all my show engines. No breaks, cracks or welds Ship to lower 48 only.
|
|
5 HP SAXON. Complete, runs good, GREEN paint. I have the large cast iron pulley as well. The original crank is also included. I put gas in the carb and ran it for a few minutes. Saxons are not scarce engines as I have seen quite a few. The 5 hp however is a different size that is very un-common. Turns out I have 2! Flywheels are true. There is a repair on the trip arm on the mag bracket and a repair on the head shown in the pictures. These are the only items I am aware of that have been fixed or repaired. Casting weakness on the hopper. Also seen in the pics. The tag on the side says SAXON and is a Bracket. Shaw& Lunt tagged engine. Serial numbers on both of the tags match. I can deliver the engine to Coolsprings in June for Gas money or you can pick it up. I will also crate and ship. ... moreYou pay for the materials, a list of them will be included if shipping occurs. There is a possibilty of getting it to Ky or Tx from Coolsprings if that helps you out. I will not calculate shipping costs, my zip code is 04105 with major carriers a few miles away, I can load or take the crate to the carrier. I will be listing other items. Please call or email me for more info or pics. Tks 1.207.939.8764.
|
|
|
Set of 5 nice oilers. Pics say it all, 2 Lunkenheimer, 2 Essex, 1 DT Williams. $12. shipping via Fed Ex Ground in the US. outside the US is actual costs incurred. All oilers are nice. Not polished, nothing broken, very good condition Email or call for more questions 1.207.939.8764 1lunger@maine.rr.com o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e177eee95-0xf8-
|
|
|
This auction is for a vintage Cunningham engine. I picked it up on a estate sale. Turns over fine. I couldn`t get any spark. I don`t see a model# on it. Shipping well be to a home or business address in the lower 48 states. Payment due in 3 days. Thanks for looking. On Apr-16-13 at 11:23:21 PDT. Seller added the following information: A E-Bay member has let me know this is a REO engine with a Cunningham tank.
|
|
This is a really neat and unusual Sunlight 110 volt portable generator. It was made by the Sunlight Electrical Manufacturing Company in Warren. Ohio. It has a Briggs and Stratton WMB engine on it for power. The engine is kick start and turns over nicely with great compression. The generator turns over nicely and seems to be in good condition. It is missing one of the doors on the back side but the other one is there for a pattern to reproduce one. The original gas tank is there and is in decent shape with a couple of small dings. Surprisingly the engine has it's original muffler which is almost never seen! I think with just a little cleaning this could be a running setup. I personally have never seen another one but I'm sure there's a few out there. This should be a fun project ... moreand surely an attention getting display at the shows. It would be a great way to have electricity there. I can deliver this engine for free to LeSueur, MN, Baraboo, WI, Portland, IN, or Coolspring, PA, later this year. I can also ship it quite reasonably through Fastenal. It can always be picked up here and stay here as long as needed as long as it's paid for. I accept many forms of payment and can be reached at 262-573-1931 if you'd like to talk about it. The pictures tell the story. You'll like it. Good Luck.
|
|
This is an Original Crank Handle for An Old Gas Engine. Not Sure what Brand it is Original To, But It Is In Excellent Original Condition with NO Damage Or Repairs. If you Know the Application for sure Let Me Know& I will Adjust The Listing. This has A Part Or Casting Number of AB 52.Crank shaft Hole is 1 3/8" Would Likely work On Any Engine That Has A 1 3/8" Crank& Uses the Gib Key As the catch. Very Nice Crank Handle to use or display With your Gas Engine.Selling As IS. May Be for: Rock Island. Alamo, Empire, Wood pecker, Titan, Famous, Gade, New Way, New Holland, Gilson, Domestic, Fairbanks Morse, IHC, Edwards, Fuller& Johnson, Lauson, Bauer This Item Weighs 5 LBS! I will Combine shipping. E- Mail me For any Combined shipping Costs. I will Do My Best To Box& Pack ... moreEverything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e2325d396-0xf8-
|
|
|
You are bidding on a used original crank case breather for a McCormick Deering M. This item is in good condition and sold as is. Thanks for looking and please check out my other auctions.
|
|
|
This is for a very rare. Limited production KV181 Kohler engine. Yes, this is an old vertical cast iron Kohler engine. This came out on a Wheel Horse garden tractor, great for a serious Kohler engine collector, you will have a one of a very rare engine. Engine is free, when turned by hand, has compression, but not sure if it has fire, is a solid state ignition. If any questions, please ask. Will ship UPS, if within delivery area, can use Speedi Delivery, Posted with
|
|
|
Reid 15hp Engine. Engine Turns over, Has a tag, Unrestored. Shipping costs are approximate. And are the responsibility of the buyer. Please send zip code for exact shipping costs. Also, please feel free to send any questions. We are closed on Saturday and Sunday, but we will respond to any questions when we return on Monday Morning.
|
|
This is a Parts lot For the ZD Fairbanks Morse Hit& Miss. Or Throttle Governed Gas Engines. All Of the Parts You See in the pictures. Will Be in the box. Carb does have A little piece broke off, but it is There, It could possibly be repaired, By Putting A bushing Thru for the butterfly, Everything else seems useable, Let me know if there is something You need me to check.Selling As IS. This Item Weighs 8 LBS! I will Combine shipping. E- Mail me For any Combined shipping Costs. I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges ... more+$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e30854771-0xf8-
|
|
This is an Original Head Part# E93R For a 1 1/2 Hp John Deere Type E Hit& Miss Gas Engine. As You Can See It is Complete. In Good Original Condition. The Valves are there& In Real Good Condition, With Plenty Of Margin. I Aquired this In with A bunch of stuff I bought Out Of an Estate Sale. This Is Definately A Useable Head. With A Couple Of Valve springs& A Needle Valve/Fuel Fitting It would Run An Engine, It will Need the exhaust Threads chased As it looks like it has been run Without A muffler For A while. All bolt Holes look Good! I see NO Damage Or Repairs.Selling As IS. This Item Weighs 8 LBS! I will Combine shipping. E- Mail me For any Combined shipping Costs. I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible ... morefor Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
Kohler Model K7-1 K12-1 engine operating maintenance and parts manual in very good condition for its age. I’m listing more of these too. Anyone collecting Kohler engines would like this. Estate find. Please see pictures to help with my description. Thanks for looking and please ask questions before buying. Item must be paid for within 7 days
|
|
This is a pretty nice original and VERY hard to find Lunkenheimer 5 inch Mockingbird steam whistle. It seems to be in good condition with no cracks. Breaks, or repairs of any kind. It is a rather large whistle and is about 26 inches long overall. It is marked with the Lunkenheimer name and has a patent date on the other side of the body. The slide moves freely. This whistle has 1 1/2 inch pipe threads. The dome is in great shape with only a few very minor dings. I believe this whistle could be plumbed up to steam or compressed air and used just the way it is. Both the slide and the valve have short cables attached to use it. These larger mockingbird whistles are almost impossible to find in the wild or even at swap meets and really turn some heads when they are polished up and displayed at ... morethe shows! The pictures tell the story on this one. They just don't get much nicer! I can be reached at 262-573-1931 if you'd like to talk about it and can deliver it to LeSueur, MN, Baraboo, WI, Portland, IN, or Coolspring, PA, later this year. Good Luck!
|
|
|
Nice used original Petter oil engine booklet. Thirty six pages printed in 1927 and sh o ws the S li ne of oil engines. All about the company and the explanation of the two-stroke cycle engine. Many photos and lots of information about these engines. Shipping in the usa only $5.80 priority mail. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e381e5c18-0xf8-
|
|
This is an Old Original Magneto Or Dynamo For an Early Hit& Miss Gas Engine. There is No identification On it just A ser# of 1746. Was told it Could be A Sumpter Or Pfeinstehl? If You Know let me Know& I will Get the listing Adjusted. As You Can See It is Complete. In Good Original Condition. The Armature Feels Tight& looks to be In Real Good Condition.I am Sure it would Produce Charge, Tag Reads"WKS OK" But I have Not Tested Or messed with this.It is 5 1/2" tall& 7" length Of Armature shaft) 3 1/2" wide. This Has no Mounting Holes On the Bottom. I Aquired this In with A bunch of Magneto's& stuff I bought Out Of an Estate Sale Of A former Magneto Repairman looks like it was in with his Collection Of"Odd& Unusuall" Mags. I see NO ... moreDamage Or Repairs.Selling As IS. This Item Weighs 8 LBS! I will Combine shipping. E- Mail me For any Combined shipping Costs. I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
Up for auction here is a Antique Vintage Brass Banner Lunkenheimer Co. Cin. Ohio Hit& Miss. Steam Oiler. Item is in good condition for its age. Oiler does have some nicks from pliers, please look at pictures. I didn't clean up oiler thinking somebody may want it to look old. Everything looks operational, however I am not an expert. Cannot find any other markings. Will ship USPS. Thanks for looking
|
|
|
Appear to be almost new. Needle bearings feel new and the rings look great! Posted with
|
|
I HAVE FOR SALE AN ORIGINAL FAIRBANKS AND MORSE IGNITER. THIS WAS RECENTLY REBUILT. THERE WERE NEW SHAFTS MACHINED AND INSTALLED. NEW POINTS WERE MADE. AND NEW MICA WAS ALSO INSTALLED. THE MOVEABLE POINT WAS PINNED TO THE SHAFT AND ALSO BRAZED OVER FOR EXTRA PIECE OF MIND. I KNOW IT DOES NOT LOOK APPEALING. BUT YOU NEVER SEE IT WHEN IT IS IN, AND RUNNING YOUR ENGINE. OTHERWISE IT APPEARS TO BE A BOLT IN AND READY TO RUN PIECE. THE EARLY Z IGNITERS ARE GETTING HARDER TO COME BY AS THEY WERE NOT PRODUCED THAT LONG. SO IF YOU HAVE A FAIRBANKS PROJECT ENGINE OR ARE IN NEED OF A GOOD IGNITER HERE IS YOUR CHANCE. KICK OFF YOUR WINTER PROJECT WITH A BANG. PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please ... moreomit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING! Posted with
|
|
|
Vintage Dempster Hit Miss Burr Grinder/Mill and stands around 22 inches tall without the funnel/hopper. I did not try turning anything so it may need some cleaning. The bottom base does not have any chips or cracks. Looks like it missing a latch/bolt that holds the cover which is shown in the 6th picture. The funnel/hopper is dented and does not have any weak spots in the metal. I will ship the items in different boxes and UPS Shipping shows it will be around $75 for each coast.
|
|
This is a Lima 10Kw generator i had used mounted on a trailer. That i am now selling as i dont have the time to fix it. The engine runs perfectly fine but the generator has stopped outputting power. It has two fuses inline for the voltage regulator, these kept blowing 5 amp fuses recently. I replaced both ice cube relays as it looked like they had some moisture in them but it did not fix the issue. I added a 10 amp fuse and it didnt blow but still no power output. The generator did smoke a little when using the 10 amp fuse for a few seconds so i am not sure if i burned up the voltage regulator or what. The engine runs great, starts right up, and from what i understand these Limas are very good units. Here us a video i took today right before i removed it from the trailer. I did disconnect ... morethe F- and F+ from the voltage regulator as someone suggested and tested continuity between the two and got 40ohms. And i tested between each and the frame i eventually got continuity but i was using an auto range finding meter which kept jumping all over the place from megaohms to ohms, to nothing so i am not sure how accurate it was. The engine/generator hour meter show 2909 hours. I have used it for 30 hours or so since i have owned it and it worked great. I dont know anything about generator repair though so i am just pulling the unit from the trailer it was mounted to and mounting a smaller generator in its place. I also broke a bolt in the generator rear mesh cover trying to remove it, apparently its not meant to be removed anyway. Here is the manual for the generator. Its a 250 frame, 12 lead i believe, single phase. Here is the brochure for the engine. The voltage regulator in it is a standard Basler APR 63-4 which is a part that can be found on ebay or any 63-4 regulator for about $130 if that was the case. I just dont have the time to mess with it and i dont really need a generator this large so i just replaced it which a cheaper generator to mount to the trailer. I have it strapped to a pallet stored out of the weath
|
|
|
IDEAL POWER LAWN MOWER CO ID#X8399 AIR COOLED HIT AND MISS ENGINE RUNS GOOD BUT HAS NOT BEEN STARTED IN A FEW YEARS SELLING AS IS VERY NICE COMPLETE CONDITION INCLUDES HAND STARTING CRANK
|
|
|
JOHNDEERE HIT AND MISS ENGINE WE HAD THIS ENGINE RUNNING GOOD LAST SUMMER? SELLING AS IS. NOT RUNNING.
|
|
|
UNKNOWN MAKE 2 HP HIT AND MISS ENGINE LOOKS LIKE IT CAN BE MADE TO RUN? SELLING AS IS. NOT RUNNING.
|
|
|
MAYNARD TYPE W HIT AND MISS ENGINE LOOKS LIKE IT CAN BE MADE TO RUN? SELLING AS IS. NOT RUNNING.
|
|
1/2 HP IHC INTERNATIONAL TOM THUMB ORIG ON CART WOW! RARE HIT MISS This is a real tough one to find in all original condition. Like they say. They're only original once! This one retains a lot of it's original paint, on the OG cart, Has most of battery box, butter churn pulley, and the crank for starting. Found in Northern WI about 30 years ago, was stored away until last year when I purchased. See photos, they don't get much nicer. No Cracks, Breaks, or repairs on it, the only flaw I see is the gas tank cap needs to be replaced. See photos. Should be picked up in a month or two. WISCONSIN RESIDENTS AND PICK UP SALES PAY 5.5% SALES TAX•FREE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA•CHECK OUT MY other items! My business is called Antique Rustler. ... moreI have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to wait for it to clear. I am a mechanic, explanation for the permanently dirty hands. I work 6 days a week and sometimes I have trouble making it to the post office I pay someone else to do my packing and try to ship as soon as I can. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you have any questions feel free to message me, I look forward to dealing with you! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Up for auction is the vintage briggs stratton kick start engine pictured below. I bought this from a local collector. It ran very well until I broke the sparkplug. There is a little foot valve in the gas tank that some times sticks. I blew in it and it frees right up. Good looking engine appears to have been restored. Sold as is seen in picture. Thank you for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
You are bidding on each generator not all four.We have 4 used generator sets in running condition. These are take outs from a local electric utility and all manuals and service records are included. Each unit has a Fairbanks Morse engine#38TD 81/8. 2.7mega watt to 3.5 mega watt generators, these are opposed piston engines ranging in HP from 2880 to 3500 at 900rpm, All are turbo charged and supercharged and we also have many new parts available for these units. Each unit weighs approx. 130,000. lbs. and we will provide transportation to a shipping dock here in Kodiak as these are all on Kodiak Island in Alaska. We are selling them as is with no warranty of any kind, we are told by the local utility that they are all in good running condition and there are no known mechanical problems. We recomend ... morethat the buyer come to inspect any unit that they may be interested in. For any other information call Andy at 907-354-8518.
|
|
|
I removed this from an old military generator that was sold at an auction at edwards airforce base. Generator had low hours. If you have any questions email me. I am selling as local pickup only. If you want to find out about shipping contact me. Posted with Posted with
|
|
|
These are David Bradley Spike Tooth Harrow Spikes and the Mounting Brackets. There is a Nice Id tag Model 917.57519. You will be emailed a tracking number when item is packed and ready to ship. If any questions Please E-mail me. Thanks Tom
|
|
I HAVE FOR SALE A MAGNETO BRACKET THAT WAS REMOVED FROM A 1 1/2 HP ECONOMY MODEL" E" ENGINE. THIS MAG BRACKET ACCEPTS THE WEBSTER STYLE MAGNETO. I BELIEVE THIS WILL ALSO WORK ON THE HERCULES AND JEAGER ENGINES. BUT PLEASE LET THE PICTURES BE YOUR GUIDE. THIS PIECE ALONG WITH OTHERS I WILL BE LISTING WAS REMOVED FROM THE RUNNING ENGINE JUST LAST WEEK. ALL SPRINGS AND HARDWARE ARE INCLUDED ON THIS BRACKET JUST AS THEY WERE PULLED FROM THE ENGINE. THE BRACKET HAS THE CASTING#S: 3O3 M1 STAMPED ON THE BOTTOM OF IT. THE MOUNTING HOLES WHERE THE BRACKET BOLTS TO THE BLOCK ARE APPROX: 1 3/4" CENTER TO CENTER. THE MOUNTING HOLES ON THE BRACKET WHERE THE MAGNETO SITS ARE 1 1/2" WIDE BY 2" LENGTH. ALL PARTS ON THIS BRACKET ARE FREE AND ARE IN WORKING ORDER. THERE ARE NO CRACKS, ... moreBREAKS, OR WELDS ON THIS PC. ANYWHERE. I WOULD CONSIDER THIS A BOLT-ON READY PIECE, SINCE I RAN THIS ENGINE MINUTES BEFORE I PULLED IT APART. DON'T PASS UP THIS OPPORTUNITY TO FINALLY PUT THAT ECONOMY OR HERC BACK TO WORK AT THE SHOWS. I WILL BE LISTING MORE PARTS FOR THE 1 1/2 E ENGINE IN THE NEXT COUPLE OF DAYS. THANKS FOR LOOKING! PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listi
|
|
|
Great condition Vermont Farm Machine Co. Bellows, Vt. drip oiler steam hit and miss engines. It is approx 1 1/2" in diameter. See pic with ruler. All glass is good. All necessary parts work. COMMUNICATION Every effort has been made to give an accurate and honest description of this item. Your satisfaction is important to me. I will gladly e-mail you additional photos of any item. If you notice an error. Or improvement we could make to the ad, please let me know. If you have any questions, please email me, as I would like to resolve issues prior to purchase. Likewise payment or communication is expected from the buyer within three(3) days of sale. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e588691f4-0x104-
|
|
Up for auction here is a 2 horse power Waterloo Boy hit and miss gas engine. This is known as the John Deere built Waterloo Boy and has the JD cast in the block. There are no cracks breaks or welds I can find anywhere on the engine. It is not locked up but I have not had it running. It will need a new fuel line. It has the Wizard magneto. Both the mag and igniter are good. The magneto has been rebuilt by Adrians's Magneto Service out of Lancaster. MN. at a cost of $212.00 I have the receipt for the mag rebuild which will be included. This engine also has a good drip oiler, belt pulley, and will come with a tin crank guard that bolts to the engine block. There are 2 nice brass tags that are very readable. The serial number is 235729. I will not ship this engine and it will need to be picked ... moreup here in Epworth, Ia. within 2 months after auction end. Please feel free to ask me any questions. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e588691b8-0xf9-
|
|
|
THIS IS A WARREN STEAM ENGINE/ PUMP COMBINATION. IT COMES WITH A SEPERATE OILER AND THE STEAM PRESSURE PIPES MEASURE 4 1/2" X 3 3/4" X 4" THE NUMBER LISTED ON THE BRASS PLATE IS#33 072. THE PUMP IS IN GOOD CONDITION WITH NO CRACKS OR REPAIRS AND THE CONNECTING RODS WORK FREELY. IT'S COMBINED SHIPPING WEIGHT IS IN THE VICINITY OF 300 POUNDS. THE PUMP ITSELF MEASURES 48"X 20" AND THE PALLET THAT WILL BE SHIPPED WITH IT. MEASSURES 48"s X 40"s. I ADDED EXTRA PICTURES TO SHOW THE CONNECTING RODS AFTER THEY WERE CLEANED UP. THIS MACHINE ONLY NEEDS A GOOD CLEANING AND MAYBE A PAINT JOB. THANKS FOR LOOKING.
|
|
|
1930s MAYTAG WASHING MACHINE MODEL 72. Model number, per eBay member info. Kick Start Small Stationary Engine OLD Used from a local collector estate sale. It runs ok as probably a hit and miss engine will. I do have a video of it running. A very early engine and my first one ever. I prefer pickup. But will ship and I'll invoice and bill you after the auction. I will be selling three engines this week. My first so I really know very little about them. Other than they all run. I have videos of them running. From a local collector's sale last week. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e59c67c4f-0xfb-
|
|
|
Up for auction is two horizontal steam engin cylinders with a flywheel and other misc. parts. I beleive all items were at one point a full steam engine in it's entirety and sure a skilled indvidual can put back together and make it whole again. The two cylinders appear to be in good condition which spin left and right smoothly. The cylinders are 8 inches long and about 2.5 inches high. The cylinders are about 3/4 inches across each. The flywheel is also in great condition which is 3.5 inches across or 11.25 inches in diameter. Please see photos to view all parts included. These cylinders have never been tested and sold as is. Please email with any questions and check my feedback and bid with confidence. Happy Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e5aa264c9-0xf5-
|
|
|
You are bidding on a nice set of hand made bolsters for I'm guessing a hand cart for maybe a 1hp Famous or anything really. I have no use for them so take a look and see if it's something you need. Well made. Ready to use. Good Luck and Happy Bidding!
|
|
|
You are bidding on a very nice and hot. Backplate for a Maytag 92 kickstart engine. I have sold dozens of these and have never had one returned. This backplate has been tested and has run an engine. If you get it and it's not hot, return it within 10 days of recieving it for a full refund! Feel free to ask questions. NO dissapointments with this one. Good Luck and Happy Bidding!
|
|
|
MAYTAG GAS ENGINE MODEL X TWIN CYLNDER HIT MISS MOTOR. BACK OF FLYWHEEL MODEL# 7 2-DA SERIAL# 49-E. APPEARS TO TO BE IN EXCELLENT CONDITION W/ ORIGINAL DECAL. POINTS LOOK WORN. MISSING FLYWHEEL BOLT, I'M NO EXERT ON THESE MOTORS BUT LOOKS LIKE MINOR TUNE-UP A ND FEW PARTS AND C OULD BE RUNNING. PURCHASED AT AUCTION. OWNER PASSED AND ALL TOOLS/ EQUIPMENT WAS SOLD, OWNER OF CLERMONT COUNTY EQUIPMENT IN OHIO. WE ALSO HAVE INTERNA TIONAL HARVESTER HIT MISS MOTOR FOR SALE. IF YOU HAVE ANY QUESTIONS PLEASE ASK. SOLD AS IS. NOT RUNNING, HAS GOOD COMPRESSION AND TURN OVER. EXHAUST WILL BE REMOVED FOR SHIPPING. NOTE" WE HAVE KEY PIN& WASHER NOT PICTURED FOR FLYWHEEL. FORGOT TO PUT IN PICTURES.
|
|
|
This is a complete and original super low hour Tecumseh? engine 3hp off of an old vintage Craftsman snowblower. Ran great. Has not been started in awhile but should again no problem. Model-143-551072 Serial-5146 08991 Horizontal shaft that measures from engine case to end 2.5' in length and 5/8' in diameter. Please message with questions and i will respond asap. Thank you.
|
|
|
ANTIQUE REVERS I BLE ELECTRIC MOTOR. TOY MODEL OF AN EARLY STEA M ENGINE. RUNS WELL ON 12V DC WE SHIP USPS PARCEL SELECT/1ST CLASS UNLESS OTHERWISE REQUESTED TO THE CONTINENTAL US WE WILL SHIP TO OTHER COUNTRIES NOT IN PROGRAM. IF PERMITTED BUT ONLY USING PRIORITY SHIP WITH INSURANCE AT INTERNATIONAL BUYERS EXPENSE. INTERNATIONAL BUYERS PLEASE NOTE: CUSTOMS TAXES AND FEES NOT INCLUDED AND ARE BUYERS RESPONSIBLITY. WE GREATLY APPRECIATE PAYMENT WITHIN 48 HOURS OF PURCHASE BUT IMMEDIATE PAYMENT IS ALWAYS RECOMMENDED TO EX P E DITE SHIPPING.
|
|
|
Here we have 5 Delaval oilers in good condition. On one has a missing glass. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e62ed0298-0x107-
|
|
|
will consider all offers We are relisting this for the third time this is a 1.5 hp john deere.It has been converted to a spark plug and coil it can be switched back to original with the proper parts. I am selling this as in.It does run and starts easy. It is also missing the muffler.Please contact me with any questions. and i will fill you in on reasons for no sale.Payment must be made within 2 days of end of auction. thanks.
|
|
|
This grist mill was purchased 2 years ago for $2800. And very lightly used. It grinds all seeds grains. You can control the fineness manually at your desire. It has a huge capacity, and it was build to last 100 years by one of the best builder in the United States. I am moving out of state, and won't have a use if it anymore, this is a rare opportunity! Good luck bidding!
|
|
|
Antique Briggs Stratton model 14 year is 1948(first year production) cast iron& turnover some compression. as what you get in photo. UPS shipping 48 states or pick up is ok. or can bring to Portland Indiana- Baraboo Wi- and Mt Pleasant Iowa. If UPS large package need give me time about 3 to 5 days before ship out. Paypal- cashier check and cash. please paid with 7days after end. sold as is. See my another list. I sell many more small motors to sell. good luck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e6ebde70c-0xf0-
|
|
|
Antique Briggs Stratton model 23A I think? tag is missing. year is 195? cast iron& turnover some compression. as what you get in photo. UPS shipping 48 states or pick up is ok. or can bring to Portland Indiana- Baraboo Wi- and Mt Pleasant Iowa. If UPS large package need give me time about 3 to 5 days before ship out. Paypal- cashier check and cash. please paid with 7days after end. sold as is. See my another list. I sell many more small motors to sell. good luck.
|
|
|
Antique Briggs Stratton model 23A(23AFB) year is 1959- cast iron& turnover some compression. as what you get in photo. UPS shipping 48 states or pick up is ok. or can bring to Portland Indiana- Baraboo Wi- and Mt Pleasant Iowa. If UPS large package need give me time about 3 to 5 days before ship out. Paypal- cashier check and cash. please paid with 7days after end. sold as is. See my another list. I sell many more small motors to sell. good luck.
|
|
|
Antique Briggs Stratton model 14s year is 1954- cast iron& turnover some compression. as what you get in photo. may some missing. UPS shipping 48 states or pick up is ok. or can bring to Portland Indiana- Baraboo Wi- and Mt Pleasant Iowa. If UPS large package need give me time about 3 to 5 days before ship out. Paypal- cashier check and cash. please paid with 7days after end. sold as is. See my another list. I sell many more small motors to sell. good luck.
|
|
|
Selling my 1911 Waterloo Boy to fund another project. It runs well but is not perfect. The engine is on a home made cart but does take a fair bit of energy to move. You can see from the pictures that I use heavy amounts of oil but I'd rather use too much than not enough. Email with questions. Selling no reserve. I am selling locally so I reserve the right to end the auction early. If winning bidder needs. I can hold the engine for 60 days but it would need to be paid in full in advance. Note* Engine does not come with a battery for the igniter. Posted with
|
|
E. T. Westbury Centaur Model Hit Miss Gas Engine Runs Great Here is a very nice little model E. T. Westbury Centaur flywheel engine. I included many photos to show its condition. This is a model that was made back in the 1940 to 1950s. It has survived nicely. Check out the YOUTUBE video to see it running at http:www.youtube.com/watch?v=VwdYnWs7vkU It will make a nice addition to your collection. Battery and coil and wires not included Please email any questions. Be sure to ask questions at least 24 hours prior to the auction end to receive a response before the auction ends. Payment: Timely payment is expected within 10 days of the end of the auction. Otherwise the buyer forfeits the sale. My customer satisfaction is most important to me. If you have any problems with your item. Please email ... moreme as soon as possible to let me know. I can not resolve an issue if I am not aware there is one. Domestic Shipping: US buyers to pay $65.95. Hawaii and Alaska shipping may be more. Shipping amount will be adjusted) Most packages are shipped USPS with delivery confirmation. I will discount shipping for buyers if applicable. If the item is paid for. I will refund shipping overcharge if applicable. Shipping includes: most items are packaged with new bubble wrap and new packing peanuts. Your item will be packaged professionally. Securely and shipped so it arrives at your location in the same condition. I generally ship USPS Priority Mail. I will ship Parcel Post upon request. On bigger items I will compare price between USPS and UPS Ground to find the cheapest shipping. Sometimes prices are inflated due to the weight of the item. I have to list a shipping price and can not state the actual shipping until the item is packaged. So the shipping may look very high. On these and larger items the buyer I will compare shipping prices to get the best shipping price. I will gladly estimate shipping costs if you email me with your zip code. International Shipping: Due to fluctuation in shipping prices. International buyers will be ask
|
|
|
Old engine turns over. Has compression but no spark. Does not run. Might be a Jacobsen. I don't see a model number on it. I have never seen it run. Has a Wico Mag. No shipping, buyer will pickup.
|
|
|
Nice old Pulley 8 Inch Diameter 2 Inch Wide x 1 Inch hub with set screw very nice pulley these small S Spokes are hard to find no cracks or breaks that I can see Thanks for looking
|
|
|
Here is a used Maytag 1 cylinder gas engine. It has Serial# 599797 on the flywheel. It is loose and free. The spark plug is broken on top. The wire to the coil is gone. The flywheel is not broken but has some pitting on it in a couple of places. It is sold as a rebuilder or parts engine. It is sold as is. Items must be paid within 7 days! Thanks for looking and check out our other items on Ebay.
|
|
|
IM CLEANING OUT THE SHOP OF SOME MOTORBIKE STUFF. THIS IS A UNKNOWN SINGLE CYLINDER ENGINE. 15"TALL 14' long 8" wide MAYBE INDIAN HARLEY? THE ENGINE HAS COMRESSION. HAD IT RUNING A YEAR AGO, HAD SPARK BUT NOT NOW NEED TO CLEAN THE POINTS ANY QUESTIONS OR IF YOU KNOW WHAT KIND OF ENGINE IT IS LET ME KNOW. THANK FOR LOOKING. Check out my other items!
|
|
|
Engine turns over. Has compression but no spark. Does not run. I don't see a model number on it. I have never seen it run. Has a Wico 305A Mag. No shipping, buyer will pickup.
|
|
|
Up for auction is a Antique Draw Saw pulley Hit and Miss Engine steampunk sold as is. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e7b6ef224-0x106-
|
|
|
Up for auction is a Maytag Hit and Miss Engine steampunk Single Cylinder Gas Engine Kick Start. Engine is untested and sold as is. Type FY-ED4 s243
|
|
|
Replaces E3AF1 E3AD1 E3AG1. Great running engine with less tha n 500hrs. 30 Day warranty. 931)492-0316
|
|
You’re bidding on a VINTAGE SEARS ROEBUCK HIT MISS ENGINE Motor MODEL 500 Thanks for looking and good luck. Pennsylvania Residents or local pickup will be charged 6% sales tax on the final price. We do combine shipping on certain items. However often large or heavy items(such as lots of tools. Hardware, Etc. will have to be shipped individually. For most lots will typically us priority flat rate boxes. Google Us: Kettering Enterprises Check out my! Be sure to add me to your! WE ONLY SHIP USPS. RETURNS AND REFUNDS Refunds will be for the original price paid. Purchased items must be returned within(14) days after you receive your item. Item must be shipped back to me unless we work out another solution. Buyer is responsible for return shipping. The returned items must be in the exact condition ... moreof which it was received with all original attachments and original packaging materials. If your purchased items are received in unsatisfactory condition. We will work with the buyer to achieve a satisfactory result. No returns for a change of mind in purchase decision. Insured items must be returned for us to make claim and you must wait for claim to be paid could take a few weeks depending on post office. Items described and pictured to the best of our ability but can't be perfect. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e80c565d6-0xf5-
|
|
|
You're bidding on a Detroit 12v71 engine. There are two different engines in the pictures. This auction is for the choice of one. Both are runners taken out of Euclid haul trucks. Any questions please call 570-499-5313 Posted with
|
|
|
Here is a great investment. Collectible, and have fun all wrapped into one! Antique. Economy" 1.5hp, Gasoline Engine on skids! Has not been run in awhile-May need magneto charged; Water-Cooled; Coming out of an over 40 year collection; Always stored inside, kept lubricated; No cracks or welds that we are aware of; This is a"sweetheart of an engine" Don't find these everyday. Not messed with! This is a true. Original Economy engine! E-mail w/ques& for addl photos. Available for showing at(315)536-1206. Buyer accepts"as-is" Buyer is responsible for own trucking/shipping arrangements and payment. Can be stored at least a couple of months.
|
|
|
Cool Old Antique Maytag Motor This belonged to a man that was a collector for years Comes with the exhaust pipe that you see in pics It turns over and has compression I have not tried to actually run the motor Selling as is with no reserve I will box and pack for free. But the buyer pays actual shipping cost
|
|
|
KOHLER ENGINE MODEL K-181. I DON'T KNOW MUCH ABOUT THIS ENGINE. BUT MY NEIGHBOR WHO DOES KNOW ENGINES SAYS IT'S RARE AND IT HAS GOOD COMPRESSION. PLEASE MESSAGE ME WITH ANY QUESTIONS. IT IS FOR SALE LOCALLY SO I DO RESERVE THE RIGHT TO END THE AUCTION. FREE SHIPPING TO LOWER 48 STATES.
|
|
|
Up for auction is a extremely clean original vintage C. S. Bell#2 coffee mill/feed/grain/seed/corn mill. In excellent complete, damage free, working condition, with no repairs or alterations. This mill looks perfect throughout, works smoothly and is fully adjustable for course to fine grinding. It comes with the original handle but can easily be adapted to a flat or V-belt pulley for use with a hit& miss/ stationary engine display or even an electric motor. Please see my other auctions for related items and possible combined shipping. Thanks
|
|
|
Up for auction is a vintage original Wico EK Magneto in overall excellent original condition with nothing broken or missing. This magneto was removed from a running engine and I have had it sitting on a shelf. Dry stored and humidity controlled for about 30 years as a spare. I am cleaning out surplus parts and this magneto is being offered in AS IS ORIGINAL CONDITION, as I have not tested it since it was removed. Please see my other auctions for related items and possible combined shipping. Thanks
|
|
|
McCormick Deering 1-1/2 horse M rod bearing grease cup. This item is old and original. Sold as is. Thanks for looking and please check out my other auctions.
|
|
|
Lil Mule machined and assembled by Microedge Machine& Tool. Runs great. Has 12V coil under base. Runs on Coleman fuel. Flywheels measure ~4.50" diameter. Click on link to see it running: http:www.youtube.com/watch?v=MCBEh26ITkc&list=UUHcs3p_G2XKa8vfyrP0VodA&index=2" Lil Mule Video Shipping to lower 48 states. On May-09-13 at 16:30:36 PDT. Seller added the following information: Lil Mule machined and assembled by Microedge Machine& Tool. Runs great. Has 12V coil under base. Runs on Coleman fuel. Flywheels measure ~4.50" diameter. Click on link to see it running: http:www.youtube.com/watch?v=MCBEh26ITkc&list=UUHcs3p_G2XKa8vfyrP0VodA&index=2 Shipping to lower 48 states.
|
|
|
Cast Iron Swivel Cart Wheel For factory/ hit miss cart
|
|
|
Here we have a large gas engine cart. I think it is for a associated or Galloway but I am not positive. It is missing two of the wheel keepers and the hitch. It looks like the front axle has an old repair. Still a very usable cart. See pictures for condition. Selling as is. Please ask questions if you have them. Thanks for looking! Check out my other auctions for more great old stuff. Paypal is not prefered on this item. This is engine needs to be picked up in Kimball. Minn. Posted with
|
|
|
Antique Maytag Gas Engine Powered Washing Machine 1920s 1930s Original. Very Good Unrestored Condition with Original Attached Ringer and Drain Hose. Antique Maytag Gas Engine Powered Washing Machine- 1920s/30s. Engine Not Locked Up- Free Wheelin' Has Been Sitting Inside For Many Years and Has Not Been Used. Please View All Pictures and Email any Questions. Pick-Up Only. Charlottesville. Virginia.
|
|
|
Lauson RSH-737 from the mid 1950's 2 HP This motor ran a couple years ago. Now it will fire on starting fluid. But wont keep running. The carburetor is going to need to be rebuilt i'm sure. Local pickup is always welcome. Plus its free!
|
|
|
This came off a non running motor. Oil bath air cleaner. What you see is what you will receive. I will be selling other parts off this motor as well. So check my other listings. If you do not see something that you need. Ask. I will be glad to list that part as well on a separate auction. WISCONSIN MOTOR CORP AGND may fit other models but this is the type of motor it came off of. No serial number but casting on motor is BA-54 LM268 BX
|
|
This came off a non running motor. It has not been cleaned up. I took it apart to see how good of shape it was inside and was surprised how clean it was. The gasket was hard and broke so it will need to be replaced. It looks to all be there. But you be the judge. Whatyou see is what you will get. There was on small piece that looked to be part of a butterfly that I could not figure out where it went.you will see in loose in one of the pictures. I will be selling other parts off this motor as well. So check my other listings. If you do not see something that you need, ask. I will be glad to list that part as well on a separate auction. ZENITH CARBURETOR 12188F L63A WISCONSIN MOTOR CORP AGND may fit other models but this is the type of motor it came off of. No serial number but casting on motor ... moreis BA-54 LM268 BX On May-10-13 at 19:18:06 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
This came off a non running motor. It does produce a spark. Can not guarantee that it works outside of producing a spark. Boot on spark plug wire is split.rest looks to be in good shape. I will be selling carburetor and other parts off this motor as well. So check my other listings. I will combine shipments to help save you shipping costs. If you do not see something that you need. Ask. I will be glad to list that part as well on a separate auction. CCW type TYPE 15 FM- XD1B7R- 1 SERIAL 5116756 MFD. FOR Y-107-B WISCONSIN MOTOR CORP No serial number but casting on motor is BA-54 LM268 BX On May-10-13 at 19:18:04 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. ... moreDelivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
1/2 INCH HAYS ORIGINAL BRASS OILFIELD HIT AND MISS GAS ENGINE DIAMOND FUEL VALVE. GOOD CONDITION. INSIDE AND OUTSIDE HAS BEEN CLEANED AND LUBRICATED. BUILT IN THE USA. GREAT FIND. I HAVE NOT SEEN MANY 1/2 HAYS GAS VALVES. Posted with
|
|
|
Here we have an old Sandow feed grinder mill. This would look great belted up to an old hit miss engine especially if it was a Sandow. The mill is stuck. Also may be missing some parts. See pictures for condition. Selling as is. Please ask questions if you have them. Thanks for looking! Check out my other auctions for more great old stuff. Paypal is not preferred on this item. Posted with
|
|
|
Here we have an old IHC model M 1-1/2 hp gas engine. The engine is stuck. Also missing some parts. See pictures for condition. Selling as is. Please ask questions if you have them. Thanks for looking! Check out my other auctions for more great old stuff. Paypal is not preferred on this item. This is engine needs to be picked up in Kimball. Minn. Posted with
|
|
|
Here we have an old John Deere E 1-1/2 hp gas engine. It tuns over freely. There is little compression. The mag is there but cracked.There are no cracks breaks or repairs on that I see on any of the castings. There is still some original paint and decals visible. See pictures for condition. Selling as is. Please ask questions if you have them. Thanks for looking! Check out my other auctions for more great old stuff. Paypal is not preferred on this item. This is engine needs to be picked up in Kimball. Minn. Posted with
|
|
All Items start at $5.99. I will not sell as buy it now. For your consideration is this: Fuller& Johnson Insrtuction Book with Parts List Model N Gasoline Engines 12 HP Condition- Great- I don't see a date on this- I did find a date on the parts list 1920- filled with schematics. Speed of engine, exhaust valves, timing gears, fuel supply lines, parts list, and much more about these engines- 20 pages- Measures about 6" x 9" Most items were found in my grandpa's home and are original. I try to do the best I can listing an item. I do forget some important details that you might require. PLEASE ASK questions. I will try to answer them in a timely manner. Thanks for looking. And good luck. All Items are sold as is. Please read: Additional checkout instructions. ALSO READ: ... moreI have added.95 cents extra in the shipping cost as EBAY want's every item to be tracked. I do not print off my own addresses as there is cost in paper and ink so EBAY'S Tracking is out- The tracking will be from the post office- I will add the tracking number at shipping- and notify you personally- Sorry if this causes any inconvenience- Please note the as of January 28. Shipping has gone up. Most packages start at $2.07 so.95 cents will be added to that for tracking. Foreign countries: I will ship to you but please note that prices start at $6.55 and go up from there depending on size and weight.
|
|
|
I just bought 21 old gas engines at an Estate Sale. Researching the B&S model PB engine I ran across. E-bay listing# 230972213719. It appears that in the box of parts I got for the PB engine was the hand crank for a Moto Mower. I cannot say for sure that is what I have but maybe you can figure it out. The diameter of the round stock is about.570. The part where you would put your hand is about 4" long. The next long part is about 6 1/2" long. The little offset about 1 1/4" long. Looks like it would wrap around a Diameter of something like 5/8" to around 3/4" You are buying the hand crank only as pictured. I will be happy to answer questions on the crank.Or drop by and inspect for yourself. Thanks for looking. Sales and shipping to lower 48 states only.
|
|
|
Here is an original Delco Light Plant Advertising Egg Separator. This item is stamped with" Dependable Delco-Light Farm Electricity" Around the rim of the separator. This is a unique. And quite rare item for those that collect stationary engines or Delco Light Plants.
|
|
|
HI I have up for sale 2 GOOD ENGINE CART WHEELS. These wheels are 12 inch in diameter and 21/4 inch across face with a 1” axle hole. These 2 wheels are all matching wheels no crack spokes. You don’t see these come up for sale very often so don’t miss out. Please check out pictures. Payment must be received with in 3 days after auctions. I will try and answer any questions you might have. I ONLY SHIP TO A USA ADDRESS. NO INTERANTIONAL SHIPPING. Thanks for looking.
|
|
|
HI I have up for sale 4 GOOD ENGINE CART WHEELS WITH THE ORIGINAL WASHERS. These wheels are 7 inch in diameter and 2 inch across face with a1 1/8 axle hole. These 4 wheels are all matching wheels no crack spokes. You don’t see these come up for sale very often so don’t miss out. Please check out pictures. Payment must be received with in 3 days after auctions. I will try and answer any questions you might have. I ONLY SHIP TO A USA ADDRESS. NO INTERANTIONAL SHIPPING. Thanks for looking.
|
|
|
Antique/ Vintage Maytage washing machine motor Model#s233 I found this motor cleaning out my Grandfather's Garage. He used to be an appliace repair man. I do not know anything about this motor. All I know is that it is an Old Maytag. Therefore you are buying this Item AS IS. The weight for this item is 65 lbs. and with the box it will be shipped in you are looking at about 85lbs for shipping. If you have any questions or would like to have other pictures I will do my best to answer them and take them As best to my ability. Winning bidder must pay for item within 3 bussiness days of the ene of auction. If item is not paid for. I will report item as PAYMENT NOT RECEIVED and it will be offered to next highest bidder or relisted. THANK YOU FOR LOOKING AT MY ITEM AND GOOD LUCK
|
|
Mitsubishi 5L Diesel Engine 81HP WMVXL050AAA Motor turns over freeley. But has not been tested, selling"AS IS" ∙ Mitsubish Heavy Industries LTD ∙ Rated output 81 HP/2450 RPM ∙ Engine Family: WMVXL050AAA ∙ B03080 Weight: 768 lbs(10593 Rack103 NB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL ... moreBUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST,
|
|