|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Scottsburg, United States
0 bids Free Shipping
Condition: Used Location: Lockport, United States
Location: BIN 173.
Buy It Now
Free Shipping
Condition: Used Location: Wolcottville, United States
appears to be a homemade piece, no numbers etc. could be wired to switch for a dosing, metering or dewatering (low PSI) application .
0 bids Free Shipping
Condition: New Location: Galion, United States
NEW UNUSED IN ORIGINAL BOX NOS. We're Not Perfect! But when available in multiple quantity, the photo shown is representative of the item.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: 1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
0 bids Free Shipping
Condition: New Location: Pottsville, United States
CCG CABLE GLAND 1/2” with sealant bramd new BRTX-A M25-2 explosion proof 1/2”. Bin A58
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
P/N: CHX17098.
Buy It Now
Free Shipping
Condition: New Location: Ogden, United States
5-1/2" x 4-1/4".
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11778. Disposable - 1 use bags. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion. Clear bag allows you to see how much room you have left.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
Buy It Now
Free Shipping
Condition: New Location: Butner, United States
NEW LOT OF 10 PCS. PRM POLYESTER FELT TRADE SIZE #2 5 MICRON LIQUID FILTER BAGS NIB. PRM PART#: BFPE5P2SX. MICRON LEVEL: 5 MICRON. Materials: Polyester Felt Bag, Polypropylene Ring. 200 MICRON 50 PCS.
0 bids $6.00 Shipping
Condition: New Location: Wendel, United States
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Assembly,Tube 6GGW0. BAYCO SL-202. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
0 bids Free Shipping
Condition: Used Location: Knoxville, United States
With our dynamic pricing model, our prices are always competitive.
Buy It Now
Free Shipping
Condition: New Location: Cincinnati, United States
1 lbs of black Delrin virgin pellets.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 18" of Fiberglass Leads. P/N: CH024421.
Buy It Now
$26.00 Shipping
Condition: New Location: Ocala, United States
Thermoforming and Vacuum Forming. THIS HEATERS HAVE TWO 12X12 HEATING ZONES. Preheat Printed Circuit Boards. Finishing Process of Textiles. Heat Treating Plastic Parts. Cools down to "safe" temperatures in about 5-10 minutes.
0 bids $9.99 Shipping
Condition: New – Open box Location: Rolla, United States
In original packaging, see photos for details3036 CG
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Nibco 611R 2X2x11/2 2" X 2" X 1-1/2" Nom C Copper Reducing Tee. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids Free Shipping
Condition: New Location: Tampa, United States
Pipe Fusion Welder Machine. Manually Operated butt fusion welding machine is suitable for PE PB PPR PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
Buy It Now
Free Shipping
Condition: New Location: Tulsa, United States
0 bids Free Shipping
Condition: New Location: Millersburg, United States
Model PENG200P1P. Cantilever Racking. 200 Micron Polyester Felt. Lift Tables. Part Number PES 200 / P1POL-WE. New Surplus. PES 200 / P1POL-WE. 14" Bag Length.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Raytek Raycmltv Fixed Mount Ir Temp. Sensor,-4 To 932F. Milwaukee Tool 49-16-2742 Chainsaw Chain. Light Industrial. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose.
0 bids Free Shipping
Condition: New – Open box Location: Conroe, United States
Hydraulic Gear Motor. 1 1/4" Keyed Shaft 4" Long. 1" x 1" Flange. 2 x 4 Bolt 5" Pilot. 1430 in lbs.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
High Frequency Ultrasonic Spot Welder Welding Machine Plastic Welding Machine. 1 Ultrasonic Spot Welder. Application: Mainly Used for Spot Welding, Pressure Welding, Riveting, Marking, Sealing, Screw Embedding, Applique Welding and Other Processes.
Buy It Now
Free Shipping
Condition: New – Open box Location: Waterloo, United States
HIFI OA1213 air oil separator filter.
0 bids Free Shipping
Condition: New – Open box Location: Middlebury, United States
Stud is 3/4-10. Length of stud is 1-3/4". Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following Weight (lbs, oz): 7.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Diesel Engine Oil,30,Conventional,1qt 6KXK8. Diesel Engine Oil, Series Delvac 1230, Container Size 1 qt, Compatible Vehicle Type Cars, Light Duty Trucks, Base Formulation Conventional, SAE Viscosity Grade 30, Standards API CF-2/CF/SF, Additives Included Rust Inhibitors, Color Brown, Container Type Bottle, Engine Cycle 2-Cycle, Features Rust Inhibiting, Flash Point 492.8 Degrees F, ISO Viscosity Grade Not Specified, Odor Characteristic, Pour Point -22 Degrees F, Specific Gravity 0.89 at 60.1 Degrees F, Viscosity @ 100 Deg C 12 cSt.
Buy It Now
Free Shipping
Condition: New Location: Doniphan, United States
This is a fixed CIP spray ball with a 1" MNPT and 2.5" ball. Spray balls are fluid driven, and are typically used in the beverage industry to clean the interior of storage tanks and piping, using a scrubbing-like effect.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specifications: Welding Head For Ultrasonic Plastic Welder / Plastic Spot Welding Machine Color: Silver Material: Aluminum Alloy Size: 3.88'' x 1.08'' x 0.47''(98.7mm x 27.6mm x 12mm) Weight:0.1kg Application: Nine Points Are Suitable For Welding Of mobile Door Panels. Package Included: 1*Welding Head Note: Not Include Machine And Handle.
0 bids Free Shipping
Condition: New – Open box Location: Dickinson, United States
Sold as lot of 5.
Buy It Now
Free Shipping
Condition: New – Open box Location: Park City, United States
TWO STARSIS WELL WORN, BUT WE THINK IT WORKS. ONE STARIS IS WORN OUT REQUIRING REBUILD OR HEAVY REPAIR. BOX IS WORN DUE TO STORAGE AND HANDLING. FOUR STARSIS LIKE NEW OR IN EXCELLENT CONDITION. I DON'T WANT TO DISAPPOINT ANYONE.
0 bids Free Shipping
Condition: For parts or not working Location: Mc Donald, United States
The Watt Stopper FX 200 Illuminometer Untested
0 bids Free Shipping
Condition: New – Open box Location: Rocklin, United States
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Westward 12U489 Western Scoop,46-3/4 In. Handle,Steel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Precision Aluminum / Polyurethane Flexible Shaft Coupler6MM x 10MM. Clamp Type. Max Speed: 25000rpm.
Buy It Now
Free Shipping
Condition: New Location: Clawson, United States
Velvac - 713118 - Rear Crossview Bracket Kit White.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Lawn/Garden Inner Tube,480/400-8 41P289. HI-RUN TUN6002. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. BALDWIN FILTERS BF1391-O Fuel Filter,8-21/32 x 4-1/4 x 8-21/32 In 4ZRN4.
Buy It Now
Free Shipping
Condition: New Location: , United States
Justrite 7150100 5 Gal. Red Steel Type I Safety Can For Flammables. Continental Contitech Plb02530-10-51 1/4" X 10 Ft Pvc Coupled Multipurpose Air. Light Industrial. & Recepticles. Electrical Outlets.
0 bids Free Shipping
Condition: New – Open box Location: Camarillo, United States
SHOCK ABSORBER.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 12" of Fiberglass Leads. 125 Watts and 120 Volts. P/N: CH020185.
0 bids Free Shipping
Condition: Used Location: Lockport, United States
Location: BIN 158.
Buy It Now
Free Shipping
Condition: New Location: , United States
Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Micro-soil Disintegrator Soil Crushing Machine Soil Pulverizer Analysis of Soil Micro-soil Disintegrator 110V. It is used for all kinds of soil crushing. 1 set of Micro-soil Disintegrator 110V (251055).
0 bids $12.00 Shipping
Condition: New Location: Plattsburgh, United States
Description Plastic Adjustable-Position Handle With M8 x 1.25 mm Threaded Hole.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
0 bids $7.00 Shipping
Condition: New Location: Wendel, United States
230/240volt, 250watts.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids $6.25 Shipping
Condition: New – Open box Location: Blanchester, United States
You are buying one thermocouple. We will do our best to describe each item to the best of our ability.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Precision Aluminum Flexible Shaft Coupler.10MM x 12.7MM. Clamp Type with set screws. Max Speed: 6000RPm.
Buy It Now
Free Shipping
Condition: New Location: Enfield, United States
Big Horn 11789 19.5" Dia. Clear Plastic Dust Collection Bag 30.5" x 33" (5 pk).
Buy It Now
Free Shipping
Condition: New – Open box Location: Rochester, United States
For Use With Grainger Item Number 3AA26B.
Buy It Now
Free Shipping
Condition: New Location: Albuquerque, United States
QTY=2 included, new. One has terminals soldered on, one does not, see pictures.
Buy It Now
Free Shipping
Condition: New Location: Butner, United States
PRM #1 SIZE LIQUID FILTER BAGS - POLYESTER FELT WITH POLYPROPYLENE RINGS - 1 MICRON LOT OF 25 PCS. Materials: Polyester Felt Bag, Polypropylene Ring. Polypropylene Ring with Handles are standard. Available in Quantities of 10 or 25 Bags or cases of 50 bags.
Buy It Now
Free Shipping
Condition: New Location: Racine, United States
LOT OF 18POLYESTER FILTER BAGS. Bag length: 8". Sewn in steel ring.
Buy It Now
Free Shipping
Condition: New Location: Winona, United States
1868X8X4 PUSH CONNECT. Weatherhead (Danfoss). Weatherhead Quick-Connect Air Brake Straight Adapters Push to Connect/NPFT Male. Straight Adapters. End 2 Type. End 2 Size. Push to Connect. End 1 Type.
Buy It Now
$4.50 Shipping
Condition: New Location: Northridge, United States
New Precision Aluminum Flexible Shaft Coupler.6MM x 8MM.
Buy It Now
Free Shipping
Condition: New Location: Grand Rapids, United States
Rub-on and transfer a beautiful design to transform your next piece into a work of art. Condition Guide. Your source for quality arts and crafts supplies at reduced prices. Item Availability.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Are you still struggling to stir the paint manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/4 HP power and maximum 2600 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping
Condition: New Location: Hebron, United States
Square Welding head --8 10MM. Square Welding head --8 8MM. Round Welding head--- 8mm.
|
|
|
|
OFFERED IS A USED Zander Stainless Steel Microfilters Filter Housing S 05-N/K Pres Max Pressure 16 bar Max Temp 200C This is a Great Deal Go to the Following Link For More Info: Please See Pictures Thanks
|
|
|
OFFERED IS A USED FILTRATION SYSTEMS CF-8M BASKET STRAINER AND BAG FILTER STAINLESS STEEL Max Pressure 300 PSI Max Temp 250 F Inner Dim 4" x 12" This is a Great Deal Go to the Following Link For More Info: Please See Pictures More Info Thanks
|
|
|
Machine adapter for 8" diameter Nordfab Quick-fit or compatible clamp-together dust collection duct work. Has machine screw holes from previous use. Clamp shown in picture not included. Shipped to the lower 48 states only. Purchases from this seller on the same calendar day may be combined in one shipment to reduce shipping cost. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14a3e8b25fa-0x10f-
|
|
Riged Router Template Guide Bushing Model: R2900*Missing Mounting Plate*Very Good Condition Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. ... moreFeel free to call us at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aw
|
|
CompAir Pneumatic Valve Model: 8M301.382 Foot Operated Spring Return 1/8 3 Way Non-Lube VLV Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. ... moreFeel free to call us at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aw
|
|
US Filter 20 GPM Used Clarifier Plates set at a 55 degree angle All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained ... moreherein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will not remove said goods or permit them to be removed from the address where installed without the written consent of Water and Wastewater Equipment Company.
|
|
120 GPM Waste Water Treatment Clarifier Unit contains“honeycomb” plate pack style 4 Outlet ports/cones. With a large 3 section flocculation chamber Overall dimensiosn: 123” L x 131” W x 140” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions ... moreshall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will not remove said goods or permit them to be removed from the address where installed wit
|
|
|
Torit Co. Dust Collector System with Shaker Model 90 3 HP 3 Ph 220/440v 9A/4.5A Unit measures 40" wide& 36" Deep 59" tall to base of motor or 83" to top of motor 8" inlet pipe Paint peeling. Came from running factory. For a freight quote. Or any questions, please email or call Delaney's Surplus at 608-643-8009 Closed Tuesdays and Wednesdays. If buying and needs freight, please email your zip code and if it is a business with a dock or residential that needs a lift-gate. When you purchase item, Please inform us if the item will be shipped to a business with a dock or residential that will need a lift-gate service. If you do not inform us, we will bill freight shipping at a residential rate. Stock 120314C
|
|
Up for your consideration is a used Donaldson Torit Dust Collector. This is a dual dust collector. Can be used for woodworking. Food powders, etc. Our business recently moved and we have an in-house dust collection system and don't require use of this one. Everything is included except the 2 filters. It even has the disconnect box and starter box. It is a model VS2400. Ser# 16672710, 3 phase. Great used condition. It has been completely cleaned and the foam insulation on the inside has been replaced. The doors even have new gasket material. This is available for delivery or local pickup in Largo Florida. I can arrange trucking and get you shipping quote if you would like or you can arrange it yourself. We do require that it be shipped within 7 business days from date or purchase. Shipping ... moreweight on wood pallet is 740 pounds. Open only to the USA. Lower 48 states. No International shipping. No shipping to Alaska or Hawaii. You can pay with PayPal or cashiers check. Please email if you have any questions. Thank you
|
|
|
C12269 NCH Model A3-100 Floor Standing Dust Collector- 200VAC 3Ph- Test Ran OK on 208VAC- Quiet Running- Outside dimensions of the cabinet(Not including handles. Levers, duct fittings, etc. are 20" by 20" by 47"Tall. Please review all the pictures. They are part of the description. We will load at no charge on a truck you send and pay for. If you do not have a freight carrier we can provide a freight quote. If you want a freight quote. Send the full delivery address including zip code, state if delivery address is in a commercial area(Saves the residential delivery charge) and state if there is a dock or forklift available(Saves the lift gate truck charge) We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
C12268 NCH Model A3-101 Floor Standing Dust Collector- 200VAC 3Ph- Test Ran OK on 208VAC- Quiet Running- Outside dimensions of the cabinet(Not including handles. Levers, duct fittings, etc. are 20" by 20" by 47"Tall. Please review all the pictures. They are part of the description. We will load at no charge on a truck you send and pay for. If you do not have a freight carrier we can provide a freight quote. If you want a freight quote. Send the full delivery address including zip code, state if delivery address is in a commercial area(Saves the residential delivery charge) and state if there is a dock or forklift available(Saves the lift gate truck charge) We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
Check out my Stores! Stainless Steel Magnetic Plate Conveyor Discharge Chute 8-1/4" wide x 7-1/2"deep x 2-3/8" thick magnet 12"long x 8-wide channel with 5" to 2-1/2" side walls Designed for use on conveyor end chute or similar applications where powerful. Rare-earth neodymium magnets in one to five pole circuit configurations remove and capture metal trash as small as 0.0001 inches from free-flowing product lines. Be sure to add me to your!
|
|
|
Aquafine UV Sterlizer Light Model# RBE-12R Serial#LS87071 12 bulbs Hours 22410 Up to 135 GPM Lamp status indicator lights SS Construction 2.5“ inlet/ outlet fittings(Tri Clover) SS ANSI 4 bolt flanges Electrical 120 Volt/ 60/ Hz/ 1 Phase/ 7.5 Amps Just removed from Production Very Good Condition! For More Information EMAIL tesales@used-equipment.com Call Kevin at(903) 355-1409,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14a5c55855b-0x10c-
|
|
Siemens U.S. Filter PV 500 Liquid Phase Carbon Adsorber Water Vessel Tank Up for sale we have a Siemens U.S. Filter PV 500 Liquid Phase Carbon Adsorber Water Vessel Tank in good shape. The PV Series Adsorber are designer for use in a wide range of low/high flow pressure applications. Groundwater remediation Wastewater filtration Tank rinse water treatment Pilot testing Underground storage tank clean up Leachate treatment Dechlorination Spill cleanup Hydrotesting Drinking Water The PV-500 is rated at 25 gallons per minute and 75 psi water pressure. It is 32 inches in diameter and 5 ft 6 in. tall. It has 2" NPT connections located on top(inlet) and bottom(outlet) The internal piping is made of PVC and the interior lining has Epoxy coating. The tank is mostly empty. Great ... moreoffer on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer is responsible for shipping charges. The shipping weight 638 lbs and the dimensions are 36" L x 32" W x 76" H. Unit will be strapped to a pallet and shipped from Hayward. CA 94545. Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never i
|
|
Seimens 75 cubic foot used waste water treatment filter press(41) 1200mm Gasketed polypropylene plates Copper stabilized plates 50mm Cake thickness Automatic hydraulic closure Center feed with 4 corner return Semi-automatic plate shifter Bombay doors Overall Dimensions: 233” L x 58” W x 70” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing ... moreand accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of
|
|
Netzsch 7 cu. ft. used filter press(25) 630mm non gasketed filter press plates 32mm Cake thickness Center feed with open side discharge return Model#630lp/24/36 Serial#400-1217 Overall Dimensions: 115” L x 45” W x 70” T Unit has optional catwalk and stairs. Please consult Water& Wastewater Equipment Co. sales for price adder for components both as is and fully reconditioned All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written ... moreconsent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispo
|
|
Parkson 7.5cf x 10.5 cf used filter press(15) x(21) 800mm Gasketed polypropylene filter press plates 32mm Cake thickness Center feed with 4 corner return 1-3-1 button design for air blow down Automatic hydraulic closure. With semi automatic plate shifter Overall dimensions: 141” L x 41” W x 76” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing ... moreand accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operatio
|
|
Filtration Solutions 3 cubic foot used filter press(10) 630mm Gasketed polypropylene plates 32mm Cake thickness Automatic hydraulics 1-3-1 button design for air cake blow down Center feed 4 Corner return. With a sludge dump cart SN: 1075 Overall Dimensions: 93” L x 36” W x 69” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted ... moreby Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will
|
|
Utica Torque Screw Driver Model: TS-30 Item. Torque Limiting Screwdriver. Type. Adjustable. Rotation. CW. Drive Size(In. 1/4. Accuracy. +/6% of Torque Reading@ 20% Of Full Scale. Grip Type. Knurled. Housing Material. Aluminum. Item. Torque Limiting Screwdriver. Overall Length(In. 6-1/2. Reset Type. Click-Over. Type. Adjustable. Meets/Exceeds. ASME Standard B107.14M. Min. Number of Cycles. 5000. Includes. Screwdriver. Primary Scale Range. 6 to 30 in.lb. Primary Scale Increments. 1 in.lb. Package Quantity. 1. Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. ... moreReturn Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items und
|
|
Sigma Systems Environmental Chamber Controller Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus ... moreat(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could b
|
|
|
Aquafine Water Purification System and Reverse Osmosis System. Very nice used condition. Everything works the way it should. Ready to install. Can ship worldwide. If you have any questions. Please ask.
|
|
CONDITION; USED. CLEAN, VERY GOOD CONDITION, WAS USED IN A ELECTRONIC SHOP. DONALDSON TORIT DUST COLLECTOR. MODEL VS-1200. AIR FLOW RANGE; 1200 CFM INTAKE DIA. 6" MOTOR; 3 HP ELECTRICAL; 208-230-460. 3 PHASE. COMPRESSED AIR REQ. 60 PSI HOUSING IS 12 GA STEEL WEIGHT; 370# AIR FILTER IS CLEAN AND IN PLACE. WITH DUST DRAWER. SIZE; 24"W x 30"L x 68" H MOUNTED ON CASTERS ESTIMATED WEIGHT CRATED; 500# LOCAL PICK-UP AT 64141. I WILL LOAD ON YOUR TRUCK FOR FREE. AND IF ITEM REQUIRES PALLETIZING. COST IS $30.00 IF ITEM IS TO SHIP COMMON CARRIER, COST FOR CRATING WILL BE $100.00. COST TO SHIP LTL COMMON CARRIER WILL BE A BUYERS EXPENSE AND RISK. PLEASE CONTACT FREIGTHQUOTE.COM@1-800-323-5441 TO OBTAIN AN ACCURATE COST. LOOK AND BID WITH CONFIDENCE. MY GOAL IS TO MAKE EVERY SALE A ... morePOSITIVE ONE. FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Utica Adjustable Torque Screw Driver Model: TS-35 36 IN-LB Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial ... moreSurplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Ta
|
|
Ruwac WS2320 For Parts or Repair. Missing removable bottom dustpan. 1 of the three electric motors does not power up. But the other two power up. I do not know much about this unit other than it was expensive new. For parts or repair sells as is. For sale locally as well. Freight Shipping Policy Paying for and scheduling of shipping is the responsibility of the buyer. I can put this on a standard pallet. Load it on a truck, or drop it off at a shipping terminal in South Bend for free. I can crate it but it will be an additional cost. I will hold it for up to a 30 days only if full payment is made within 3 days. Please give me at least a days notice before shipment. Uship and Freightquote are great places to get freight shipping from. My zip code is 46628. Free local pickup I can load into ... moreyour truck or trailer.
|
|
|
For sale is one FSI X100 bag filter unit. Very good condition. Only briefly used. Includes internal basket, lid, and o-ring. Does not include filter bag. Manufactured in 2011, Max 100 PSI and 110F. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14a73a476cc-0x104-
|
|
|
You are biding on 1 used PACE Fume Extractor Air Filter 8888-0825 Equipment MODEL: ARM EVAC II(8888-0825) VOLTS 110 FREQ 60 PHASE 1 2 used Pace 8886-0429 45mm st/st Flex Arm 1 Flex Arm Unknown model 1 Hose: 88" x 31/2" 1 Hose: 95" x 2 1/2" 1 Hose 88"x2`/1/2" 1 Hose 78" x 3 1/2" 1 Hose: 44"x3" 14 day warranty
|
|
|
Aquafine RBE-12R UV Light Model# RBE-12R Serial#LS87071 12 bulbs Hours 22410 Lamp status indicator lights SS Construction 2.5“ inlet/ outlet fittings(Tri Clover) SS ANSI 4 bolt flanges Electrical 120 Volt/ 60/ Hz/ 1 Phase/ 7.5 Amps Very Nice Condition! Recently Removed From Production! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
ebay template Nederman Nederman Filter Box Dust Collection Unit I TEM S OLD A S P ICTURED Very nice dust collection unit for machine shop. Shows very little signs of use or wear. Like new. 1HP motor Includes hoses in box Measures 22" x 22" x 28"high Receptacle holds 20 litres and is easily removable for emptying. Nederman is still in business. Current similar model sells for $4.500 Manuals included. INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic ... morecondition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we have to bring in special equipment or call a mover. Note: Most of our listings are marked Freight shipping. We ship via FEDEX and USPS for item(s) 150lbs or lighter. The cost of shipping will be sent via invoice. We encourage all customers to log i
|
|
|
C12276 Donaldson Torit Model 81 Floor Standing Dust Collector- 115VAC 1Ph- 1-1/2 Hp- Test Ran OK- Outside dimensions of the cabinet(Not including handles. Levers, duct fittings, etc. are 28" by 28" by 48"Tall. Please review all the pictures. They are part of the description. We will load at no charge on a truck you send and pay for. If you do not have a freight carrier we can provide a freight quote. If you want a freight quote. Send the full delivery address including zip code, state if delivery address is in a commercial area(Saves the residential delivery charge) and state if there is a dock or forklift available(Saves the lift gate truck charge) We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
HI UP FOR BIDS IS A USE VERY LITTLE 1/4' INGERSOLL-RAND WATER PUMP. LOOK AT PICTURE THIS IS WHAT WE ARE SELLING. THANKS CHRISTINE.
|
|
|
Up for sale is a lot of 2 of the same 20 inch blue water filter canisters with a new filter. Part number could be 142606/USF/PPI/214. Note only 1 is shown in the picture but there are two. See pictures for details. Shipping is free within the continental USA not including Alaska. Canada, Mexico, PR or any out of country purchases. Extra shipping charges would apply. A 14 day inspection and ROR is granted minus 25.00 in return shipping if items do not work as described.
|
|
KNOLL COOLANT PUMP FILTRATION SYSTEM HAVE 8 UNITS AVAILABLE ALL OFF OF CNC MILLING MACHINES TYPE# VRF 250/1200 1999 YEAR ORDER#29918878 REFRENCE# 01 08012 ALL UNITS ARE ALIKE AND AT OUR FACILITY 230/400 VOLTS 3PH 2915 RPM SIEMENS PUMP MOTOR SHIPPING AND RIGGING COSTS ARE THE RESPONSIBILITY OF THE BUYER SPEC'S SUBJECT TO FINAL INSPECTION SELLING"AS IS- WHERE IS" AS DESCRIBED BUYER IS RESPONSIBLE FOR ALL RIGGING AND SHIPPING CHARGES. WE CAN ARRANGE RIGGING SERVICES AND SHIPPING ARRANGEMENTS. AGAIN. AT BUYER'S EXPENSE CALL RUSS@ 414 940-3288 WITH ANY QUESTIONS WE STRIVE TO MAKE EVERY SALE A"FIVE STAR" BUYING EXPERIENCE. IF WE HAVE NOT DONE SO. PLEASE LET US KNOW WHAT WE NEED TO DO THAT'LL ENABLE YOU TO PROVIDE"5 STAR" EBAY SELLER FEEDBACK! WE'LL DO ... moreOUR VERY BEST TO MAKE IT SO! SINCERELY, RJ-EQUIPMENT WISCONSIN BUYERS WILL BE CHARGED APPROPRIATE SALES TAX UNLESS A WISCONSIN SALES TAX EXEMPTION FORM IS PROVIDED BY THE PURCHASER. BUYERS OUT OF WISCONSIN AND/OR INTERNATIONAL BUYERS WILL NOT BE LIABLE TO PAY FOR OR PROVIDE A SALES TAX EXEMPTION FORM. THEY WILL BE LIABLE TO PAY THEIR OWN STATE OR COUNTRIES SALES TAX ACCORDING TO LOCAL GOVERNMENTS TAX LAWS.
|
|
THE ITEM FOR SALE IS A ONEIDA AIR SYSTEMS 2hp C+ VAC SYSTEM. THE UNIT IS IN GREAT USED CONDITION SO IT WILL HAVE DUST ON AND IN THE UNIT AND FILTER. IT COMES WITH THE HOSES. CONNECTORS AND WALL MOUNT. THIS IS A LARGE ITEM AND WILL HAVE TO BE PICKED UP UNLESS YOU WANT TO ARRANGE SHIPPING FOR THE ITEM. IF YOU HAVE ANY QUESTIONS PLEASE ASK AND THANKS FOR LOOKING! THIS IS A PICKUP ITEM CASH ON PICKUP! ITEM MUST BE PICKED UP AND PAID FOR WITHIN 3 DAYS OF THE AUCTIONS CLOSE. IN CASH. UNLESS YOU ASK US FIRST AND MAKE PRIOR ARRANGEMENTS Auction is just for what you see in the pictures- Please ask questions or call us if you need additional information on the item being sold. So there is no confusion. All items are sold as is. All sales final, no returns and no warranties expressed or implied! All ... moreitems are for sale locally Operating Hours- TUE-FRI 10am-6pm& Sat 10am-4pm 2 BOND ST. WESTMINSTER. MD 21157 410-751-2111
|
|
|
Up for auction is a used Aercology EA 700 Mist/ Dust Collector. Collector works great. I just don't need it anymore. Shipping price determined upon sale(weight and destination) Sold as is* No returns* Shipping to US only*
|
|
Description For sale is a used Vickers filter model OFP 35-S-E-20. It has a new filter. Bowl seal and bowl spring. Came out of a spare parts room of a manufacturer. You get exactly as shown below. Comes with a 14 day return policy. See the specs in the pictures below. Please see the pictures below for more details and specs. PLEASE SCROLL DOWN TO SEE LARGE DETAILED PICTURES* Our pictures are part of the description. Please examine them carefully. You get exactly what is pictured. See pics for details. We sell an assortment of items that are both new and used. We do our best to describe the item accurately. But please use the pictures as your final decision maker on whether you want the item or not. We are not experts in all areas. If you have questions, please contact us. Many of our used ... moreitems come from estates or closed businesses. We do realize that with many items. Condition is everything. However, we typically do not do too much cleaning of these items as we know that with certain items, if they are not cleaned properly, it diminishes the value. We leave the cleaning up to the new owner. Contact US: If you have questions about a particular item or want to talk about larger quantity buys. Please call(920) 246-4663 or e-mail patrick(at)packercitysales(dot)com. If you have any questions before or after winning the auction. Please do not hesitate to contact us. Our office hours are Monday to Friday 8am-6pm CST. We are off during the weekends and all major holidays. All emails and shipments will be processed within 2 business days. If you are not satisfied with the purchase. Remember to contact us before you leave a feedback. Leaving feedback means you have already graded this transaction. And it will not help to bring it closer to resolution. We like good feedback, so we work to the best of our ability to"get things right. Before leaving a negative feedback, contact us first. for more great items! Payment Payment Method: WISCONSIN RESIDENTS WILL BE CHARGED 5% SALES TAX. SORRY BUT UNCLE SAM DEMANDS IT
|
|
|
Here is a used Filter-Mate air handler/smoke eater model MH-33. This was used for approx. 10 yrs. in a weld shop. And was currently in good working condition. Measures approx. 2 ft. x 2 ft. x 6 ft. This item will be a Local Pick-Up Only. Any questions please call 920-773-2121 Ext. 134. Specifications: Model- MH-33 + FH-42-1x1. Voltage- 460 volt 3 phase. Amps/HP- 2.5 FLA 2.0 HP. Filters Required- Prefilter 24"x24"x4" Bag 95% 24"x24"x36"
|
|
Taft-Peirce Gauge Thread Plug A-5 Taperlock 1 1/4- 11 1/2 NPT Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme ... moreIndustrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import
|
|
Scale Lupe 10x Lenses Lense Numbers 1. 3, 4, 5, 7, 12, 13 Set Of 7 Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at ... moreAcme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(I
|
|
MTI Spindle Motor Controller Model: SMA8115-1A-1 Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus ... moreat(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could
|
|
Up for auction is this Rare Antique W.S. Tyler No. 16 USA Standard Testing Sieve 14 Meshes to the Inch ASTM E-11 Brass. I believe this one is close to 100 years old. It is marked" THE TYLER STANDARD SCREEN SCALE ~ THE TYLER DOUBLE CRIMPED ~ OPENING.046 IN. 1.168 MM. ~ MESHES TO THE INCH 28 ~ U.S. SERIES EQUIVALENT No. 30 ~ THE W.S, TYLER COMPANY, CLEVELAND, O. Great Patina. It measures 8" in diameter and 2 5/8" tall. It has a lip so it can be attached to other pans. This one does have 5 cracks along the edges and the top lip is slighty dented bit it still fit together nicely with other scales and it still works great. W.S. TYLER developed the first Test Sieve products and standards that are commonly used today. While a Test Sieve may appear to be a very simple device. It is ... moreactually a very precise instrument used for Quality Control every day. Sieving, remains a very cost efficient method of measuring particles, producing consistent, repeatable results and analysis. Standard Test Sieve diameters include 3" 8" 12" 200 mm, and 300 mm. Special application products are available in 6" 10" and 18" diameters and include Air Jet and Wet Test designs. All W.S. Tyler Test Sieves are fabricated in brass and durable stainless steel. Our premium quality sieve cloth, woven by Haver& Boecker, is produced to the very tight tolerances, providing consistent repeatable analysis. Standard openings per international specifications range from 5" 125 mm) down to 20 um(micron) Repeatable test results and particle size distribution curves from laboratory to laboratory. State to state, country to country, is a long term goal of W.S. Tyler’s Industrial Group. W.S. Tyler Test Sieves conform to the current ASTM E11-13 and ISO 565. 3310-1 standards. The products detailed in TABLE 1 below are proudly manufactured in Mentor. Ohio USA. Test sieving has been used for particle measurement for generations in the Agricultural. Bio-Industry, Chemical, Cosmetics, General Industrial, Fertilizer, Fo
|
|
|
For Sale- KEI Dust Collector Model 5015-1 Serial 31929 On Casters Looks in Good Working Condition. Untested at our Facility Offered By Industrial Sales& Salvage 20 Cedar Lane New Limerick Maine 04761 207-694-1635
|
|
574-825-4990 SKU: 59900 Torit Model 64 3/4HP Single Phase 115 Dust Collector Cabinet 4"Inlet Shaker. Brand: Torit Size: Length: 26 in. Width: 28 in. Height: 60 in. Condition: Used Model: Model 64 Country of Manufacture: Unknown Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 191.0 This unit is in good working condition. Has been repainted. Filters need to be cleaned. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is ... moreimportant to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Please call us at 574-825-4990 with the Bullseye SK
|
|
574-825-4990 SKU: 59899 Amano PiA-30M Intelligent Pulse Jet Type Dust Collector 1.5KW 440V 3PH 6"Inlet. Brand: Amano Size: Length: 28 in. Width: 28 in. Height: 64 in. Condition: Used Model: PiA-30M Country of Manufacture: Unknown Consigner: B Items in Lot: 1 Lister: 1 MPN: PiA Series Weight(lbs. Oz) 365.0 This is a good used unit that has been tested and works as it should. Please see link for manufactures specs. The PiA series has been replaced with PiE series and all of the specs matchup with the PiA series. S/N 30695. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading ... moresource for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED
|
|
574-825-4990 SKU: 59898 Torit Model 64 1/2 HP Single Phase 115/230V Shaker Dust Collector(2) 3"Inlets. Brand: Torit Size: Length: 30 in. Width: 26 in. Height: 64 in. Condition: Used Model: Model 64 Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 190.0 Unit has been tested and works like it should. Currently wired for 115 volts. 60 cycle. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business ... moreis important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Please call us at 574-825-4990 with the Bul
|
|
Used filter press. 2 cu. ft. capacity expandable to 3 cu ft. 12x16) 470mm Poly pro gasketed plates 32mm Cake thickness Manual hydraulics Center feed with 4 corner return. Overall Dimensions: 86” L x 38” W x 52” H Price Reconditioned: $8.750.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used ... moreequipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immed
|
|
Dekastat Resistor Model: DS1463 Total Resistance: 12k O Milliamps Max: 23 Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call ... moreus at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs d
|
|
USED LAB filter press.1.25 cu. ft. 19) 12” Plate and Frames Manual screw closure Corner feed 3 Corner return Unit includes a drip tray Price Reconditioned: $5.900.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 ... moreand ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State t
|
|
|
A great auction find. This worked when I removed it from the building. It is 3 phase. But can be switched to single phase, by changing the motor.
|
|
|
You are LOOKING AT a Parker Guardian GT410C6F582 Portable Hydraulic Filter Pump Model: GT410C6F582 110/120 volt/ 50/60 Hz Filter Element: 6F584 COMES WITH ALL HOSES AND CASE AND FILTERS PICTURED IN LISTING. IF YOU HAVE ANY QUESTIONS PLEASE ASK THEM PRIOR TO PURCHASING AND VIEW ALL PICTURES AS WELL. THIS ITEM TURNS ON SOUNDS CLEAN THAT IS THE EXTENT OF MY KNOWLEDGE. IT LOOKS CLEAN AND SOUNDS SMOOTH. THANK YOU
|
|
Included in this sale: Klimawent AFP-3 Mobile Fume Extractor Active Air Filter Tested Functional Physical Condition: This unit is in overall good cosmetic condition with fairly clean filters. Functional Condition& Warranty: This unit has been tested for key functions; unit sucks in air. The unit's power will sometimes switch off automatically and it may take several tries for the power switch to stick to ON. Item Location(For Company Use) Item SKU: DS Location: For Domestic U.S. Customers: WE DO NOT PAY RETURN SHIPPING- Any questions or special needs should be resolved before you bid. IT Remarketing ships within 1 to 3 business days after payment has cleared. Local pickups are always welcome! IT Remarketing and all equipment listed by ITR is located at: 6600 Long Point Dr. Suite#103 ... moreHouston. TX 77055. We accept Paypal. Visa, MasterCard, and American Express. We accept Paypal, Visa, MasterCard, and American Express. Buyer is responsible for all customs fees. IT Remarketing does not pay any customs fees.
|
|
|
Star Tank& Filter Press MFG. Model: 10 SS 6212 TIC. SN: 69074. 5 stainless steel plates: Frame 1"x 12" diameter round. Top feed. Bottom discharge, closed delivery, 2 eye. On frame with pump and motor. Manual open and close.
|
|
|
Sperry Filter Press 160 cu. ft. 1200mm Plate Size 160 Cubic Feet Center feed Four Corner Return Overall Dimensions: 40' Long x 5' Wide x 5' High Used in good working order Customer Responsible for Freight from Cleveland. Ohio 44102
|
|
Air Flow Systems Vibra Pulse V200-VP. PN#V200-XXXX-XXVP-33XX BUILT 2001 FOLKS THIS IS A NICE RUNNING READY TO GO. AIR FILTRATION SYSTEM! WE WELCOME YOU TO COME OUT AND INSPECT THE MACHINE AT OUR LOCATION WHIS IS LEE'S MACHINERY 4089 N. RIDGE RD. PERRY. OHIO. 44081 PHONE 440-259-2222 ASK FOR MIKE. THIS IS A NICE RUNNING PIECE IF EQUIPMENT. THE MACHINE OPERATES VERY WELL AS YOU CAN SEE IN THE VIDEOS BELOW. IT HAS A 3.5 HP. BALDOR MOTOR 3PH. 208,220/460 VOLTS 9.7, 8.8/4.4 AMPS LINK TO MACHINE RUNNING LINK TO AIRFLOW FOR SPECS OR QUESTIONS. VIDEO PROMO OF LEE'S MACHINERY WE'RE A 3 GENERATION SHOP. LEE(MY DAD) HAS OFFICIALLY RETIRED, MIKE(ME) WHO'S BEEN DOING THIS FOR 24+ YEARS, MEL 10+YEARS AND DENVER(MY SON) WHO BEEN HERE FOR A LITTLE OVER 4 YEARS NOW. NICE EQUIPMENT AT A FAIR ... morePRICE AND WE GET IT THERE IN ONE PIECE. WE HAVE OVER 25 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING,ETC. I DON'T LIKE USING THE AUTOMATIC FREIGHT CALCULATOR. I LIKE TO PUT THE TRUCKING COMPANIES UP AGAINST EACH OTHER SO I GET SOME GOOD COMPETITIVE PRICES. JUST E-MAIL ME WITH YOUR ZIP CODE AND LET ME KNOW IF YOU CAN UNLOAD ON YOUR END VIA- LIFT TRUCK, OR LOADING DOCK. WE WILL LOAD ONTO YOUR TRUCK AT OUR LOCATION UNSKIDDED AT NO ADDITIONAL CHARGE, WE WILL CHARGE $ 100 FOR A CUSTOM SKID, OR IF IT NEEDS TO BE FULLY ENCLOSED IN A CRATE WE'LL CHARGE $250 FOR A SKID AND CRATE. IT SHOULD SHIP OUT AT 38" LONG, 30" DEEP AND 50" TALL WEIGHING 550LBS. CRATED.
|
|
Via Einaudi. Automatic, 9 cu. ft. used filter press 470 mm. 50 non-gasketed polypro plates Center feed. Open side discharge into a trough Hydraulic. Electro mechanical sludge pump Includes SS Dumpster Outer dimensions: 185" L x 32" W x 52" T. Price Reconditioned with(50) non-gasketed plates: $15.500.00 Price Reconditioned with(50) gasketed plates: $25.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead ... moretime subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part t
|
|
Durco. 6.5 cu. ft. used filter press(22) 630mm Non-gasketed polypro plates(1) 2’ center feed and(4) 1.5’ corner return Automatic pneumatic hydraulic closure and release 100 PSI max feed pressure 32 mm Cake thickness. Overall dimensions. Overall Dimensions 110’ L x 36’ W x 54’ H. Price Reconditioned with(22) non-gasketed plates: $13.900.00 Price Reconditioned with(22) gasketed plates: $19.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. ... moreLead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure
|
|
Lanco. 3.5 cu. used filter press 69 sq. ft. filter area(22) 470MM Gasketed polypro plates(1) 2" PVC feed and(4) 1" PVC corner returns Manual hydraulic closure 32 mm cake 100 PSI max feed pressure Overall dimensions: 10'L x 3'W x 4'H. Price Reconditioned: $10.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! ... moreFor more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments
|
|
Dillon MK 4 Multi Purpose Handpiece Oxygen Acetylene Weilding Acetylene and Air Heating Oxygen Acetylene Cutting Sheet Metal Cutting* This Item Comes With An Assortment of Pieces. Please Check Pictures. Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you ... morehave any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We w
|
|
|
Millipore YY500500 SS-316 T-Line Gas Filter Housing 1/4" NPT Port*NO FILTER* This filter housing does NOT include a filter Head- Bowl Electropolished 316 Stainless Steel- Vitron O-Ring. WGGB12S02 12-Stack Filter. Port size: 1/4" FNPT 3.75 Inch Diameter 3.125 Inch Height. Max Inlet: 150 PSIG- 68F 50 PSIG- 212F. SKU 42826
|
|
Up for bid is a 3 inch diameter USA Standard Sieve No. 10 that was used in the 1970's by a mud logging company. The opening is.0787 inches and 2.00 mm. It weighs 3.7 ounces. The sieve is in good shape but it could use a good cleaning. Because many of my items are vintage in nature and/or pre-owned. Some light scratching or imperfections may be expected. I will always try to point out any imperfections that I find. But it is the buyer’s responsibility to view the pictures and description closely to get a reference to the condition of any item. If you have any questions, please contact me prior to bidding. Most of my shipping is done via priority mail. Parcel post, or first class mail depending on the weight of the item. I will ship items within 1-2 business days after payment has cleared. ... morePlease make payment via PayPal within 3 days of auction's end. Extreme care and attention will be given to the packing of your item to insure safe arrival. Combined shipping on multiple purchases is always available. The shipping cost is based on the total weight of the box and contents. If you win the auction. Please contact me with any question or problem before leaving Feedback. Thank you.
|
|
574-825-4990 SKU: 60162 Rosedale 6"Basket Filter Strainer 24"Long 2"NPT Ports. Brand: Rosedale Size: Length: 38 in. Width: 10 in. Height: 10 in. Condition: Used Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 43.0 Unknown pressure rating. Previous application was 100 PSI. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your ... morepurchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Please call us at 574-825-4990 with the Bullseye SKU# or eBay item number(s) of the items that you w
|
|
574-825-4990 SKU: 60160 Aercology FD3000 Dust Smoke Oil Mist Collector Filter for Laden Air 3HP 3PH. Brand: Aercology Size: Length: 57 in. Width: 32 in. Height: 75 in. Condition: Used Model: FD3000 Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 450.0 3 HP. 208-230/460 volt, 3ph. Two stage filter. Aercology is now owned by Donaldson Torit. This unit is setup to stand upright on a 44-1/2" stand with a 30-1/2"x30-1/2" foot print. Inlet opening is 9.5" Cabinet measures 26x32x75" CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial ... moreSales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a frei
|
|
Johnny's Bottle's& More Inc. ~ Presents by Our Clients Permission ~ ~ Explosion Proof Vent Fan& Motor ~ This explosion proof vent fan is in reasonable condition for having been used in a manufacturing setting. 23” Dia. Blade. 5 Blades Housing is 23-3/4” Dia. X 13” Wide 26-1/2” O.D. at the Mounting Flange. 8 Mounting Holes that are 3/8” Dia. Pulleys have 2 V-Belts ~ Motor Info ~ The Master Electric Company. Dayton OH Serial# CT 10452. Type: PB, Frame: F13, H.P: 1, Volts: 220/440, Cycles: 60, Phase: 3, RPM: 1725, Code: J, Amps: 3.6/1.8, Temp Rating: 55 C Inventory# 3286166 Shelf: None Please review all images above for item details. Also check out our other listings for a large assortment of other items like this and many interesting items that are available. Shipments outside ... morethe US are at extra cost through the Global Shipping Program. Visit My eBay Store: Johnnys Bottles&More Sign up for my email newsletters by adding my eBay Store to your Favorites Every buyer gets a MyStoreRewards invitation for cash back. On Oct-22-14 at 14:26:42 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
JWI. 25 cubic foot used filter press(50) 800mm Gasketed polypro filter press plates Automatic hydraulics Center feed with 4 corner return Semi automatic plate shifter 1-3-1 button design for air blow down M# 800G32-50-25 233” L x 50” W x 64” H Price Reconditioned: $36.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For ... moremore information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments an
|
|
Duriron 20 cu. ft. used filter press(31) 900mm non gasketed filter press plates Center feed with 4 corner return Automatic hydraulics Overall Dimensions: 183” L x 58” W x 81” H Price Reconditioned: $29.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment a
|
|
Durco style. 14 cu. ft. used filter press(19) 36" 915mm) plates. 1-1/2" cake thickness Center feed. Non-gasketed, polypro plates Automatic hydraulic. Unit on risers. Overall dimensions: 16'L x 3'W x 9'T. Price Reconditioned with 19 non-gasketed plates: $20.900.00 Price Reconditioned with 19 gasketed plates: $27.400.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to ... morefacilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equip
|
|
|
This is a used Ashland OnGuard B-Series water treatment controller. The unit was pulled out of service working. Please feel free to ask any questions regarding this item. We look forward to doing business with you!
|
|
|
This is the second M67 smokemaster that I am selling. It is in a good used condition and the airfilters should probably be changed soon. But the ones in it have some life left in them. I put local pickup only, but we can discuss shipping if you would life to pay us to ship it too you.
|
|
|
Pace 8889-0205 Arm-Evac 200 Fume Extraction Filtration Unit The Arm-Evac 200 is designed to meet the needs of light-duty production as well as rework and repair operations. Lightweight and compact. The Arm-Evac 200 installs in minutes. Power Requirements: 120VAC. 60Hz 3 Amps 230VAC, 50Hz 1.38 Amps Size: 393mm H x 282mm W x 365mm D(15.4" H x 11.1" x 14.3" D) Sound Level: 58 dBA# Inlets: Two 75mm(3" dia. High volume air flow Heavy duty brushless motor 18 gauge steel construction On/off switch located on front panel Easy filter access Compact and self-contained Includes pre-filter. General purpose combo filter and power cord Check out my! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14abf92b943-0x100-
|
|
ebay template TORIT DFT2-4 Dust Collector I TEM S OLD A S P ICTURED The Torit Downflo cartridge collector delivers exceptional performance. Low operating pressure drop and the most compact footprint in the industry while maintaining the efficiency and reliability you've come to expect from Torit. VIDEO FEATURES Multiple Inlet and Outlet Locations, 48" Leg Clearance, Installed Filters, Hopper Bottom Style with Connector for 12" Diameter Drum SPECIFICATIONS Rated Nominal Air Flow Capacity 500 to 3150 CFM Air Intake Port 7" Diameter Motor 7.5 HP. 3450 rpm Power Requirement 230-460 Volts. 60 Hz, 3 Phase Overall Size 43" x 70" x 98" high Weight(approx. 1.400 Lbs*Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, ... morethis item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up.
|
|
|
Johnson Controls Unitary Controller W/8 BO For Facilitator Model: FA-UNT110-1 Removed from working system. Priced very low for quick sale. Free Shipping. Shipped to the 48 states only. Sorry no shipping outside the U.S.
|
|
|
1- used 30 cu. ft. JWI Filter Press Model 1000G32-25/37-20/30 SYLS. Serial#4746. With(37) 1.000 mm caulked, 1-3-1 button, gasketed& recessed polypropylene plates with 32 mm cake thickness Approx. 3 1/2 in. dia. center feed and(4) approx. 2 1/4 in. dia. corner returns. Automatic hydraulic closure with pump control system and plate shifter. Rated for 100 psi maximum feed pressure and 3,100 psi maximum closing pressure. Approx. OAD: 17 ft. long x 5 ft. wide x 6 ft. tall. Press was only in service for approx. 1 year before being shut down. It has removed and is being stored at our New Jersey facility. F.O.B. LOCATION
|
|
|
J. Little Mercer Co. Inc. Stock Number: C-2290 Mfg. Knight Corp Stainless steel basket within a basket 2 inch threaded to flange side in and out 8 x 35 inch housing Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
Inventory# RU2070 Manufacturer: Samsco Model# S60CNA Type: Gas-Fired Burner Flow Rate GPH: 39 Dimensions: 85"L x 43"W x 70"H Serial# 1949 395.000 BTU. 333 gallon tank capacity. 316 stainless steel. 110 volt, 15 amp. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
Millipore Sanitary Filter Housing Stainless Steel H4117USAC(2) 1-1/2" Tri-Clamp Connections(1) 1/2" Tri-Clamp Connections 4" Tri-Clamp Main Body Used Surplus. Excess Inventory Listing Includes Only What is Shown in Pictures See Pictures for Information! No Way to Test Items Money Back if DOA Will Combine Ship! Bitter End Trading is an asset recovery wholesaler specializing in new and used surplus industrial equipment. Bitter End Trading is not a representative of any manufacturer listed; all names. Logos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with ... moreas much information as possible. Bitter End Trading is not liable for any products sold. The customer is responsible for proper testing, installation and use of equipment purchased. No warranties are expressed or implied. Combined Shipping Policy We will combine shipments to reduce costs for customers purchasing multiple items. After customers have completed their multiple purchases they should request an invoice. We will package and weigh the entire purchase and provide an invoice. Including shipping and handling. Shipping rates are generated using the EBAY shipping calculator. Handling charges per shipment are determined by size of the item. As well as additional packing requirements on delicate instruments. See individual item for cost. Domestic Shipping. We ship using UPS and FedEx to provide en-route package tracking. International Shipping We ship using UPS. FedEx and USPS. Items shipped by UPS and FedEx are more efficient and provide customers with en-route tracking. Items shipped by USPS cannot be tracked. International buyers are responsible for any and all applicable customs. Duties, taxes and fees. Freight Shipping We have very competitive rates for shipping freight. All items are palletized and shrink wrapped before
|
|
|
Check out my Stores! TRI-CLOVER Streamline™ In-Line Filter/Strainer Furnished with a single perforated screen for straining large particles. 3" Tri-Clamp connections 316L Stainless Steel 4-1/2"diameter x 12" long body Overall Lenght: 15-3/4"Long Be sure to add me to your!
|
|
|
Used working condition. Can be floor stand or ceiling mount, buyer may arrange shipping from 29673 if wanted, we can load with a forklift.
|
|
JWI 75 cubic foot used waste water treatment filter press(41) 1200mm Non-Gasketed polypropylene plates Copper stabilized plates. 50mm cake thickness Automatic hydraulic closure. Center feed with 4 corner return Semi-automatic plate shifter Overall Dimensions: 233” L x 58” W x 70” H Price Reconditioned: $78.000.00 each Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) ... moreAll serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company i
|
|
Spectroline Pro-Log Eprom UV Eraser Model: 9103A-1* Tested and Works Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us ... moreat Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties
|
|
Monitor Model: Hp vs15 Screen Size: 15" Built In Speakers* Does Not Come With Power Cable or Video Cord Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve ... morethem if you wait. Feel free to call us at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you pai
|
|
Drillco Drill Stop Box Model: DS 69A Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus at(407) ... more328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when
|
|
574-825-4990 SKU: 59904 Aercology DM-1000 2HP 3PH 460V Dust Collector Cabinet w/Manual Shaker Bag Filter. Brand: Aercology Size: Length: 34 in. Width: 34 in. Height: 70 in. Condition: Used Model: DM-1000 Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 463.0 6" inlet diameter. 2hp. 460 volt, 3 phase blower. Manual shaker. Cabinet dimensions 32" wide x 28-1/2" Deep x 69" Tall. Good working condition, some rust on inside of cabinet. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial ... moreSurplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing m
|
|
574-825-4990 SKU: 59903 DCE Unimaster UMA40AD 3/4HP Single Phase Dust Collector Automatic Shaker 4"Inlet. Brand: DCE Unimaster Size: Length: 28 in. Width: 24 in. Height: 60 in. Condition: Used Model: UMA40AD Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 245.0 3/4HP. 1 Phase, 115 volt. Unit has automatic shaker built in. Measures 60" tall x 28"wide x 24" tall and has a footprint of 17-1/2 x 17-1/2" Tested and in good working condition. S/N 8-1349. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source ... morefor new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING
|
|
574-825-4990 SKU: 59902 Torit 1HP Dust/Smoke Collector Filter 3PH 230/460V On Casters 3"Inlet Shaker. Brand: Torit Size: Length: 27 in. Width: 25 in. Height: 57 in. Condition: Used Model: Model 75 Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 Weight(lbs. Oz) 250.0 Nice clean unit that has been tested and works as it should. 1 Hp. 230/460V, 3Ph. Manual shaker. 3" Inlet. Unit is on casters. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used ... moresurplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping.
|
|
574-825-4990 SKU: 59901 Airflow Systems Vibra-Pulse Dust Collector 2.5 HP 460V 3PH 2"Inlet Dust Pak. Brand: Airflow Systems Size: Length: 40 in. Width: 26 in. Height: 39 in. Condition: Used Model: V2.PG.AP Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 1 MPN: V200-XXXX-XXXX-23XX Weight(lbs. Oz) 354.0 Nice unit in good working condition. Model R5325A Regenerative blower. 2.5 HP, 460 volt, 3ph. Pressure gauge, 2) 2"Inlet ports. Filters will need to be replaced. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used ... moreIndustrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasin
|
|
GE Fanuc AC Servo Motor Model: a2/3000 Motor Spec: A06B-0373-B577#7008 Output: 0.5 kW Cont. Volt: 129 Amp: 2.6 Freq: 200 Speed: 3000 Phase: 3 Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. ... moreIt's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus at(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be va
|
|
|
HERE IS A GOOD WORKING DUST COLLECTION SYSTEM FOR YOUR WOOD OR METAL SHOP- WAS USED WITH WOOD. BUT IN AN ENVIRONMENT WITH METAL& WOOD. DEPENDABLE SYSTEM- GOOD BAGS MAKE AN OFFER
|
|
Call Us Today! 626.330.4647| AQUAFINE RBE-8R ULTRAVIOLET UV WATER TREATMENT UNIT, Made by Aquafine. This is an Ultrviolet Treatment Unit in Excellent Condition! Model# RBE-8R Serial# KS97009 Aquafine RBE Models feature a UV treatment chamber connected by a flexible. Liquid tight conduit to a separate electrical control panel. The cabinet is rated NEMA 4X, Making RBE Models suitable for many harsh indoor and outdoor enviromental conditions. Specifications: Maximum Capacity Clear Fresh Water: 80 GPM 18.2 m3/hr Distilled DI/ RO Water: 100 GPM 22.7 m3/hr No. of UV Lamps: 8 Standard Operation Pressure: 120 psig UV Dosage Microwatt sec/cm2: 30.000 Overall Dimensions: 71" x 20" x 56" high Weight: 340 lbs. Copyright 2014 1 Machinery Sales.com | All Rights Reserved, DESCRIPTIONS Please ... moreread descriptions carefully. We list any features, specifications and details we know and/or research. When possible we test the basic features If you don’t see the information you need or notice any discrepancies; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Don't assume items come with any accessories not shown in pictures. All items come as shown in pictures. PAYMENTS We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. After 10 business days of non-payment item will be relisted and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. STORAGE We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. We offer two kinds of storage fees: Inside:
|
|
Shelco MicroGuardian MS10 FOSBN-786DUBTH SS Filter Cartridge Chamber Housing EC Shelco MS10 FOSBN-786DUBTH SS Filter Cartridge Chamber Housing USF with String Wound Filter Cartridge 304L Stainless Steel Shell with Bolt& Nut Closure for Double Open Ended Cartridges for Liquid Applications SBN = Brass Nickel Plated Head with 304L Stainless Steel sump and brass petcock drain Cartridge: 9.75" Long. 4 3/4" Diameter 3/4" Pipe Inlet/Outlet Flow rate up to 7 gpmlm Maximum operating pressure: 250 PSI(17 bar) 275°F(135°C) Weighs 7.5 pounds Applications: Oils Air/ Gas Petrochemicals Photo Solutions Magnetic Coatings Process Wate rFood& Beverage Solvents Pre-filtration Paint/ Inks Water& Waste-water Chemicals Two available. Used for water in a medical device manufacturing ... morefacility. Very clean. Excellent condition. We have been in the commercial liquidation business since 1976. And selling on eBay for 13 years, and have a good, solid reputation. Check out our eBay feedback. We want you to buy with confidence. We accept VISA. MasterCard, and Discover(Please call us with credit card information) or PayPal(to a CONFIRMED PayPal address) Unless otherwise noted. All items sold by surpluswarehouse/Dewell& Dewell, Inc. on eBay are covered by a non-transferrable 14 Day Limited Warranty with respect to operation only. Seller warrants the product to operate to manufacturer's original specifications. Warranty period begins at the time that the buyer agrees to purchase the item on eBay. Notification of any operational defect must be made to the seller by phone or email within the warranty period. All materials returned must be shipped prepaid, and received within 10 days of notification, in the same condition that the item was in when shipped by the seller. The seller will repair. Replace, or refund the original purchase price of any merchandise returned under the terms of this warranty. Shipping costs are NOT refundable. There are no other warranties of any kind. Including, but not limited to
|
|
Whitey Swagelok Model: SS-45F8 Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus at(407) 328-1280 ... moreMonday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the s
|
|
one) Machine tool filter/coolant tank. 44" x 74" x 10" high, with(2) Fuji/Teral coolant pumps, model VKA343A2, ¾" pipe size, 19/28M head, 85/100 LPM, 200/220 vac, 3 phase, 50/60 hz, 540/900 watts. Used for a short period of time and replaced with a different model. $775 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-11990, 91, 92, 85, 86, 89 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $775.00 truck International Shipping. $3000.00 by sea to port FREE scheduling. Supersized images and templates. Get Vendio Sales ... moreManager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Hayward Bag Filter Used Good Condition Model Number FLT4202 150 psi Pictures are of actual unit. Customer Responsible for Freight from Cleveland. Ohio 44102.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14acff9122b-0x105-
|
|
|
Eagle Double Chamber Water Softener Used Good Condition Double Chamber Pictures are of actual unit. Please contact for further information. Customer Responsible for Freight from Cleveland. Ohio 44102
|
|
CMT TOOLS TRIPLE ACTION AIR CLEANER INDUSTRIAL AIR FILTER EUC Used in excellent to near mint condition. The outside of this unit has lots of dust and some minor scuffing and scratching from storage. It appears this filter has never been used and has a filter in it. This unit should be cleaned prior to use as it was in a dusty warehouse. A great find. Thanks for looking. Please feel free to message us with any questions you may have. Or to request additional photo's! Every item that is offered for sale is examined carefully. If you do not agree with any of the descriptions or condition that is given on any item that is listed for auction or sale. PLEASE contact us before leaving any negative feedback. This is greatly appreciated. PayPal is the only method of payment accepted. Sorry. No ... morepersonal checks, M.O.s or cash. Please see other listings and add us to your favorites!
|
|
|
Powermatic Dust Collector. Used. Good condition. PayPal not accepted, please pay on pickup.
|
|
May be new. May be used- unknown, untested. Multiple Shipping Options Available- Pick the best one for you. We doubt you will find this any cheaper. anywhere! We do not know much about the item. Only what is marked or what we have found online through limited research. Please be sure this item is the correct one for YOUR application! See photos for additional model specs and details. WHERE DID THIS COME FROM? The item(s) in the listing came from a large packaging converting company. All items were kept in a climate controlled maintenance inventory stockroom. Some items were stored in their original boxes. And some were not. In talking to the inventory manager of the facility, he explained that in some cases, when items came in from the supplier, they were removed from the original box, tagged ... morewith their own inventory control numbers, and were then placed on the stock shelves. This was done primarily due to“space limitations” as leaving an item in the box can take up so much more room on a shelf than an“un-boxed” item does. Over the next several months. We will be listing thousands of industrial items that we acquire from this packaging converting company. They had built a new facility and closed its doors at the previous location. This company remains a worldwide leader in packaging and print technologies in consumer food and non-food industries. The facility they closed was huge, nearly 800,000 square feet) and had a workforce of over 350 workers. The new facility is even larger(over 1 million square feet) and now employs over 500 workers. With all new machinery installed at the new location, the decision was made to liquidate the remaining parts and pieces of the maintenance departments’ store room” and we were fortunate enough to be able to purchase the majority of the items. Sorry. But if this is shipped to an Ohio address, Ohio requires us to collect sales tax on the final sale price of the item as well as the shipping cost for that item.
|
|
|
4 Dust Collector Tops. No barrels, sold together. Used, good condition. PayPal not accepted, please pay on pickup.
|
|
|
Delta Dust Collector. Used. Good condition. PayPal not accepted, please pay on pickup.
|
|
Gigware USB Keyboard Model: 10A07* Lot Of 2 Insurance Insurance is required and will be automatically included on all items as part of the handling charges. Handling charges may vary according to buyer's freight requirements. Such as crating etc. For the benefit of our buyers, combined shipping will be available when possible. Return Policy We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Tracking numbers and any additional information will be sent by email. Problems are questions that were not asked before the listing closed. If you have any questions. Please ask them before the listing ends. It's often to late to solve them if you wait. Feel free to call us at Acme Industrial Surplus ... moreat(407) 328-1280 Monday thru Friday 9-5 EST. We will do our best to answer any questions as soon as we can. If you contact us on the weekend, holidays or after hours, you may not hear from us until the next business day) Local Pickups are welcome on a will call basis; please call to arrange it. Feedback is automated and should be posted once you have left feedback for us. A change of heart or having buyers remorse: If you change your mind on an item. We may take it back determined on a case by case basis, but shipping both ways will be paid by you and the eBay fees will be deducted from your return. ATTENTION FOREIGN BUYERS We will ship items under $2500 direct to foreign buyers in countries not restricted by U.S. government regulations. We will ship items under $1000 to Mexico and under $1600 to Canada as required under NAFTA using UPS, USPS or FEDEX according to buyer's needs. All items over amounts stated above will be shipped to buyer's U.S. export agent. Buyer is responsible for all arrangements and costs associated with export/import of their purchase. We will not make false statements on any paperwork. It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be d
|
|
|
Used coupled hours. Parker: 15P210QM250MM195. 15P210QBM2KS124.
|
|
|
Pumped used a couple hours for tests in a laboratory. Works great! Will provide datasheet upon request. SHERTECH 20 GPM Aqua Tiger Stainless Steel Centrifugal Pump. 36 Volts. 3/4" NPT Inlet& Outlet. SS Impeller. Viton O-Rings. Nonflammable Liquids Only. Model# CMSV36D. MSRP: $375. This pump is an unused surplus item in very good working condition. Inspected and tested. Shipping Weight: 5 Lbs.
|
|
|