|
|
Order by: |
0 bids $10.00 Shipping
Condition: Used Location: Waldo, United States
This is a nice original Enduro style low tension ignition coil for an ignitor fired gas engine. I checked it just before I took the pictures and it puts out a nice, hot blue spark that will surely run an engine.
0 bids $10.00 Shipping
Condition: Used Location: Waldo, United States
This is a nice original Thordarson low tension ignition coil for an ignitor fired gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind that I can see or know of. I checked it just before I took the pictures and it puts out a nice, hot blue spark that will surely run an engine.
0 bids $7.00 Shipping
Condition: New – Open box Location: Waldo, United States
It is 1/2" thick and has 1/4" wide slots on one side and 1/4" slots on the other side 90 degrees off of the front side. Let the pictures be your guide. Good Luck.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is a rather hard to find Eisemann GV4 4-cylinder base mount magneto for an old tractor. These were used on several Caterpillar tractors and possibly other tractors. It is fresh from an old collection where it lived as a spare.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
I checked it just before I took the pictures and it puts out a nice, hot blue spark that will surely run an engine. If you've been looking for a bigger and therefore hotter coil don't miss your chance on this one.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is an original Splitdorf style low tension ignition coil for an ignitor fired gas engine. I checked it just before I took the pictures and it puts out a nice, hot blue spark that will surely run an engine.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is an original Enduro style low tension ignition coil for an ignitor fired gas engine. I checked it just before I took the pictures and it puts out a nice, hot blue spark that will surely run an engine.
0 bids $7.00 Shipping
Condition: New – Open box Location: Waldo, United States
It is 7/16" thick and has 1/4" wide slots on one side and 1/4" slots on the other side 90 degrees off of the front side. Let the pictures be your guide. Good Luck.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is a rather hard to find JI Case CMA 4-cylinder base mount magneto for an old tractor. These were used on the earlier C, D, L models and possibly other tractors. It is fresh from an old collection where it lived as a spare.
0 bids $7.00 Shipping
Condition: Used Location: Waldo, United States
This is a VERY slightly used phenolic magneto drive coupler for a tractor, car, truck, power unit, or other application. It is 1/2" thick and has 1/4" wide slots on one side and 1/4" slots on the other side 90 degrees off of the front side.
Buy It Now
$10.00 Shipping
Condition: New – Open box Location: Waldo, United States
It is part number XA43 and has 1" npt pipe threads. It is assembled with correct style original fasteners and is ready to be used on an engine or put on the shelf for a spare. If you've been looking for one don't miss your chance on this one.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
It makes tending a boiler a much easier task. Let the pictures be your guide. You'll like it. Good Luck.
0 bids $7.00 Shipping
Condition: New – Open box Location: Waldo, United States
It is 3/8" thick and has 1/4" wide slots on one side and 1/4" slots on the other side 90 degrees off of the front side. Let the pictures be your guide. Good Luck.
Buy It Now
Free Shipping
Condition: New – Open box Location: Waldo, United States
It is part number U5. If you've been looking for one don't miss your chance on this one. Let the pictures be your guide. You won't be disappointed in any way. Good Luck.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
It is clockwise rotation and the drive lugs are in great shape. It has no noticeable bearing wear and turns over very nicely with good magnetic pull and the impulse works as it should. It puts out a hot, snapping spark on all four leadouts that is sure to run your engine if it is set up properly.
0 bids $7.00 Shipping
Condition: New – Open box Location: Waldo, United States
It is 11/16" thick and has 1/4" wide slots on one side and 1/4" slots on the other side 90 degrees off of the front side. Let the pictures be your guide. Good Luck.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
VERY nice original International Harvester Type L rotary low tension magneto. Several applications including 1 1/2hp and 3hp Type M engines with ignitor ignition, 1hp Titan/Famous and possibly others.
0 bids Free Shipping
Condition: Used Location: Belgium, United States
This is a real nice original cast iron pulley for a Monitor hit and miss gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It will fit on any engine with an adapter plate.
0 bids $10.00 Shipping
Condition: Used Location: Waldo, United States
This is a rather hard to find original ignitor for a 12, 15, 20, and 25hp International Harvester Famous or Titan gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind that I can see or know of.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is a pretty nice original Eisemann AM-4 four-cylinder base mount magneto for an old garden tractor or power unit engine. It is clockwise rotation. It has no noticeable bearing wear and turns over very nicely with good magnetic pull.
0 bids $16.00 Shipping
Condition: Seller refurbished Location: Waldo, United States
It is an IS model which has the Impulse Starter built into the end of it. It is in excellent professionally rebuilt condition with no cracks, breaks, or repairs that I can see or know of other than a slight chip on the points cover which really don't affect it's performance.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
It is clockwise rotation. It has no noticeable bearing wear and turns over very nicely with good magnetic pull. It puts out a hot, snapping spark that is sure to run your engine if it is set up properly.
0 bids Free Shipping
Condition: New – Open box Location: Waldo, United States
It is fresh from an old estate where it lived on a shelf for decades. It is counter clockwise rotation and the drive lugs are in unused condition. It is flange mount on a horizontal pattern. It turns over very nicely with good magnetic pull and the impulse works as it should.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is a very nice original Eisemann AM-4 four-cylinder base mount magneto for an old garden tractor or power unit engine. It is clockwise rotation. It has no noticeable bearing wear and turns over very nicely with good magnetic pull.
0 bids $10.00 Shipping
Condition: Used Location: Waldo, United States
This is a pretty nice origina brass connecting rod oiler in the "0" size. It has 1/8" npt pipe threads that are in great shape. The original cap is there which is often missing. These small connecting rod oilers are pretty tough to find.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is real nice original and hard to find Fairbanks Morse J4A11 4-cylinder magneto for an old farm tractor, power unit, car, or truck. It is base mount and everything looks to be in solid condition with no cracks, breaks, or repairs that I can see or know of.
Buy It Now
$50.00 Shipping
Condition: Used Location: Ashland, United States
GARDNER 1 1/2" Steam Engine Flyball Governer. Really great piece. Everything turns and spins with ease. The flyballs spread out when the shaft is spun. I'm not sure if a couple of the pieces of cast that go around the center cogs have been cut at one point or not.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
They are in great shape with no cracks, breaks, or repairs of any kind. There is one casting flaw that doesn't affect anything. They would also make great spares on the shelf. Good Luck.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is real nice original and hard to find Fairbanks Morse J4A11 4-cylinder magneto for an old farm tractor, power unit, car, or truck. It is base mount and everything looks to be in solid condition with no cracks, breaks, or repairs that I can see or know of.
0 bids $7.00 Shipping
Condition: New – Open box Location: Waldo, United States
This is a NOS, new old stock brass timer lever for a Cushman 4hp Binder engine. It is part number RB66 and measures about 5 1/8 inches long and about 7/16 inch thick. It is fresh from the unused inventory of an old hardware store and is ready to be used on an engine. These NOS Cushman parts are exceedingly tough to find in the wild anymore so if you've been looking for one for an engine project or just for a spare on the shelf here it is. The pictures tell the story. You won't be disappointed in any way. I can be reached at 262 573 193 1 if you'd like to talk about it. Good Luck.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
This is a VERY hard to find original exhaust manifold for a Fordson Model N tractor. It is in excellent slightly used condition with no cracks, breaks, or repairs of any kind that I can see or know of.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
This is an original crankshaft for a 3hp Fairbanks Morse Z throttle governed or hit and miss gas engine. I believe it is correct for all variations of the open crank 3hp Z engines. It is part number ZB25 and is in good used condition with no cracks, breaks, or repairs of any kind.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is a very hard to find original fuel pump for a Fairbanks Morse Y oil engine. It is in pretty good used condition with no cracks, breaks, or repairs but the plunger is stuck. After a little elbow grease it should be ready to be put to use on an engine!
0 bids $7.00 Shipping
Condition: Used Location: Waldo, United States
This is an original adjustable throttle linkage for a 1hp International Harvester Mogul gas engine. It is in excellent original condition with no cracks, breaks or repairs of any kind that I can see or know of and is ready to go to work on an engine.
0 bids $10.00 Shipping
Condition: Used Location: Waldo, United States
This is a hard to find original main bearing cap for a Galloway hit and miss gas engine. It is part number AB77 and is in good condition with no cracks, breaks, or repairs of any kind. The threads for the grease cup is in great shape.
0 bids $15.00 Shipping
Condition: New – Open box Location: Waldo, United States
This is a recast cylinder head for a 3hp Falk flywheel type engine. It is cored for the water passages as can be seen. It will need to be machined to use but looks like a nice casting to machine. This would be a fairly complex casting with all of the core pieces.
0 bids $16.00 Shipping
Condition: Used Location: Waldo, United States
This is an extremely scarce original Wehr flyball governor for use on a Fordson tractor engine. It is in excellent slightly used condition from an old collector's estate. It seems to have very little wear and turns as it should. There are no cracks, breaks, or repairs that I can see or know of other than the cap on the oiler missing. It seems to work as it should. It would look great on your Fordson tractor and surely make it more user-friendly. It would also look good on the shelf for a future project. The pictures tell the story. You'll like it. It will likely be a long time before another one comes along! I can be reached at 262 573 193 1 if you'd like to talk about it. Good Luck.
0 bids Free Shipping
Condition: Used Location: Belgium, United States
This is a real nice original cast iron pulley for a York hit and miss gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It will fit on any engine with an adapter plate.
0 bids $8.50 Shipping
Condition: Used Location: Waldo, United States
This is a real nice original fuel pump body for an International Harvester 1hp Mogul gas engine. It is cast iron and in excellent used condition with no cracks, breaks, or repairs. The 1/8 pipe threads are in great shape.
0 bids $8.50 Shipping
Condition: Used Location: Belgium, United States
This is a rather hard to find original cast iron cam gear or timing gear for a Gilson gas engine. It is in excellent used condition with no cracks, breaks, or repairs of any kind. It has 40 teeth and they are in great shape as is the timing cam lobe.
0 bids $9.00 Shipping
Condition: Used Location: Waldo, United States
It is in good used condition with no cracks, breaks, or repairs of any kind. It has 30 teeth. There are a few with a slight wear mark on the edge but the rest are all in great shape. The cam itself looks to be in great shape.
0 bids $8.50 Shipping
Condition: Used Location: Waldo, United States
This is a very hard to find original armature coil for a Splitdorf Model E-15 single cylinder magneto for a hit and miss gas engine. It is in excellent original condition with no cracks, breaks, or repairs of any kind that I can see or know of.
0 bids $9.00 Shipping
Condition: Used Location: Waldo, United States
This is a cast iron exhaust rocker arm stand for an Ingeco hit and miss or throttle governed gas engine. I believe it is for a 4 or 5hp engine. It is in excellent used with no cracks, breaks, or repairs of any kind.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
This is an original cast iron crankguard or fender for a Witte hit and miss or throttle governed gas engine. You won't be disappointed in any way. Good Luck.
0 bids $14.50 Shipping
Condition: Used Location: Waldo, United States
This is a real nice original cast iron pulley for an Ottawa hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It will fit on any engine with an adapter plate.
0 bids $16.00 Shipping
Condition: New – Open box Location: Waldo, United States
If you've been looking for one don't miss your chance on this one. Let the pictures be your guide. You won't be disappointed in any way. The last picture is of an original ignitor arranged in a 4 1/2hp engine for orientation reference.
0 bids $8.50 Shipping
Condition: Used Location: Waldo, United States
I believe this is an original magneto bracket for a Vaughan garden tractor. It is brass and is in good condition with no cracks, breaks, or repairs of any kind that I can see or know of. These original Vaughan magneto brackets are quite tough to find so if you've been looking for one don't miss your chance on this one.
0 bids $7.00 Shipping
Condition: Used Location: Waldo, United States
It is in excellent original condition with no cracks, breaks, or repairs of any kind and only a few slight dings. Let the pictures be your guide and decide if you need it. Good Luck.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
This is a very hard to find original 3/4" Gardner steam engine governor. It could also work for a gas engine. It is in excellent, used condition just as found from an old collector's estate. Everything moves as it should and it has very little wear on the the gears or on the shaft.
0 bids $7.50 Shipping
Condition: Used Location: Belgium, United States
This is a rather hard to find original cast iron cam gear or timing gear for a Gilson gas engine. It is in excellent used condition with no cracks, breaks, or repairs of any kind except for a crack in the adjustable lobe under a set screw.
0 bids $15.00 Shipping
Condition: Used Location: Waldo, United States
This is real nice original and hard to find Fairbanks Morse RV6 6-cylinder magneto for an old farm tractor, power unit, car, or truck. It is base mount and everything looks to be in solid condition with no cracks, breaks, or repairs that I can see or know of.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
Here is a large and impressive 26" clutch pulley for a big gas engine. It has an 8" face and mounts to every other spoke of the flywheel with holes about 8 3/4" on center. If you've been looking for one to complete a restoration here's your chance.
0 bids Free Shipping
Condition: Used Location: Waldo, United States
Here is a large and impressive 32" clutch pulley for a big gas engine. It has an 8" face and mounts to every spoke of the flywheel with holes about 8 3/8" on center and every other spoke of the flywheel with 3 holes 14 3/4" on center.
|
|
|
|