|
|
Order by: |
0 bids Free Shipping
Condition: For parts or not working Location: Dillon, United States
1
0 bids $16.50 Shipping
Condition: For parts or not working Location: Lockridge, United States
Bare head for a 1 1/2HP John Deere e. All threads look good and usable however the exhaust and where the fuel needle valve goes could be cleaned up a bit for best results. No valves. I don’t see any breaks or cracks. There looks to be a little casting flaw, (air pocket) I am pointing to the area with a pen in the pictures. I don’t see it being a issue and it doesn’t go clear through. See pictures for the absolute best description. Valve seats have some small pitted areas. This item is old, used, and sold as is.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is what I believe to be an original John Deere E 3hp rocker arm for a Hit Miss Stationary Engine. It has been repaired in 2 spots.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Book about the John Deere E engines and it's variations written by Rie Fulk.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are hi quality and made in the USA.
Buy It Now
Free Shipping
Condition: New Location: Morton, United States
This is for a John Deere “E” 3 Hp. My John Deere pans are 16 gauge stainless steel, laser cut and very stiff (to hold the gasket against the block). They’re flat with no oil cup. Just leave it off unless you are working the engine real hard.
Buy It Now
Free Shipping
Condition: New – Open box Location: Morton, United States
Here is a new fuel tank for a John Deere 1 1/2 hp Type E engine. This is a poly fuel tank so it can’t rust out like the originals. Check out the pictures and make sure it is what you are looking for. Please ask any questions prior to purchase.This listing is marked as "AS-IS" and "NO RETURNS". If I make a mistake on measurements or you feel something is not as described please let me know and I will try to make it right.My shipping time is set for 5 business days, weekends and holidays don't count. I ship most items quicker than that though. If you are worried about how soon I can ship and item please ask before you buy it. This isn't my main job and I have a family so I am not always on call 24/7.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This is a very nice high quality spark plug at a very reasonable price. Part: Autolite 386 Spark Plug 18mm. Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What works on one might not work on another.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This is for a John Deere “E” 3 hp oil pan.It replaces JD part number AE16RT.My John Deere pans are 16 gauge stainless steel, laser cut and very stiff (to hold the gasket against the block). They now have the 1018 steel oil cup spot welded on for when you are working the engine real hard and for limiting oil splash.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original governor assembly with oil slinger for a 1-1/2hp and or 3hp John Deere E gas engine. It appears to be in great shape. Has oil slinger. Fits 1-1/2hp and 3hp engines. I am sure there are other excuses also but I don't care and don't want to hear them.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original governor assembly for a 1-1/2hp and or 3hp John Deere E gas engine. It appears to be in great shape. The gear teeth have a little bit of wear but nothing that will hurt it. Fits 1-1/2hp and 3hp engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Spring set for JD 3 hp engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made in the USA.
Buy It Now
Free Shipping
Condition: New – Open box Location: Morton, United States
Here is a new reproduction muffler for a John Deere E hit & Miss engine. This muffler fits the 1 1/2 & 3 hp engines. Check out the pictures and make sure it is what you are looking for. Please ask any questions prior to purchase.This listing is marked as "AS-IS" and "NO RETURNS". If I make a mistake on measurements or you feel something is not as described please let me know and I will try to make it right.My shipping time is set for 5 business days, weekends and holidays don't count. I ship most items quicker than that though. If you are worried about how soon I can ship and item please ask before you buy it. This isn't my main job and I have a family so I am not always on call 24/7.
0 bids $15.00 Shipping
Condition: New Location: Wheatland, United States
John Deere Rear Bolster for a 1.5 horse stationary engine cartThis item is new but does have a manufacturing defectPlease look closely at photo #4Reasonable offers will be considered Questions welcomeShips only to US locationsThank you for taking the time to look
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Merrill, United States
Made in the U.S.A.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Expansion plug for under the mag, all hp.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an WICO XH-1042 Short Lug 2 Cylinder magneto. It seems to be in excellent shape. If you want to talk about it 419 789 1159. 2 Cylinder. Very Hot Spark. The mounting hole and slot are about 4-1/8" apart on center.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made in the USA.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Top quality and made in the USA by a major spring manufacturer exclusively for us.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made from an original to the original specs.
Buy It Now
Free Shipping
Condition: New Location: Morton, United States
This is a NEW replacement housing-frame made to replace the John Deere HCT magneto housing or frame. This is not an OEM part. The use of part numbers or letters is intended for reference only. This will fit all sizes of John Deere type E low tension magnetos 1 1/2, 3 & 6hp. Armature spacer shims and ground brush are included. These are made in the USA by one of the finest magneto shops in the U.S. My shipping time is set for 5 business days, weekends and holidays don't count. I ship most items quicker than that though. If you are worried about how soon I can ship and item please ask before you buy it. This isn't my main job and I have a family so I am not always on call 24/7.
0 bids Free Shipping
Condition: For parts or not working Location: Orient, United States
E108R / E2213. 1-1/2HP, 3HP, 6HP JOHN DEERE E Hit Miss Gas Engine. Original Igniter for. The moveable electrode is STUCK. I have been collecting hit miss engines for 35+ years and I am very knowledgeable.
Buy It Now
Free Shipping
Condition: New Location: Morton, United States
These funnels were used to fill gas tanks and crankcase oil. These are high quality reproductions. Even if you don’t use it it looks great hanging on the wall next to your engine!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Push rod for the John Deere 1.5 hp.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made in the USA.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
New cast governor body fits 1.5-3hp John Deere engines. Use your weights and pin. Not included.
0 bids Free Shipping
Condition: For parts or not working Location: Holgate, United States
I am sure there are other excuses also but I don't care and don't want to hear them. Here is an original head with valves for a 1-1/2hp John Deere E gas engine. The valves fit well in their guides The needle valve and jet is missing for the carb.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Got any other gaskets you need made?. No problem. Send us an original and we can get a die made!
Buy It Now
Free Shipping
Condition: For parts or not working Location: Racine, United States
Nice ignitor, no breaks, moves freely.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Vinyl John Deere decal. Our decals are MADE IN THE USA with a high quality material to withstand many years of being on your engine.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Long head stud for John Deere 1.5 hp.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are a gasket paper material. These are Made In The USA, We refuse to use import sources to manufacture our specialty parts just to make a bit more profit like others do.
Buy It Now
Free Shipping
Condition: Used Location: Sherwood, United States
For your consideration is an original John Deere E Magneto Gasket Plate for a Hit Miss Stationary Engine. This goes around the magneto and holds the gaskets. It’s rusty and pitted but should still be useable.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Got any other gaskets you need made?. No problem. Send us an original and we can get a die made!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Head gasket with firing ring for the 3 hp John Deere model E engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Copper Ignitor gasket for the 1 1/2 3 & 6 hp John Deere model E engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
New babbit rod bearing for 1.5hp John Deere engines.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original camshaft assembly for a 1-1/2hp and or 3hp John Deere E gas engine. It appears to be in great shape. Fits 1-1/2hp and 3hp engines. I am sure there are other excuses also but I don't care and don't want to hear them.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
If there is any other parts you are looking for and you don't see, give us a call and we might be able to help you out.
0 bids $18.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original Connecting Rod that fits the 1-1/2hp John Deere E engines. It appears to be in great shape and ready to use. Fits 1-1/2hp John Deere E engines. About 9-1/2" center to center on the holes.
Buy It Now
$10.25 Shipping
Condition: Used Location: Lockridge, United States
Item is used, old, and has wear. Removed from a 1 1/2Hp igniter fired JD hit & miss. Total overall end to end length is 14 3/4” See pictures for the absolute best description.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is a Muffler for a 1-1/2hp and or 3hp John Deere E gas engine. It appears to be ready to use. I am sure there are other excuses also but I don't care and don't want to hear them. So here it is.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
High temperature rated head gasket material! Includes nine pieces, head gasket with firing ring, two pan gaskets, side cover gasket, copper ignitor gasket, magneto gasket & felt and the top cover gasket.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Tank drain for the John Deere 1.5 & 3 hp.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Rocker arm push rod pin for John Deere 6 hp.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original camshaft assembly for a 1-1/2hp and or 3hp John Deere E gas engine. It appears to be in great shape. Fits 1-1/2hp and 3hp engines. I am sure there are other excuses also but I don't care and don't want to hear them.
Buy It Now
$22.00 Shipping
Condition: Used Location: Baldwin, United States
Buy It Now
Free Shipping
Condition: New Location: Morton, United States
John Deere E Needle Valve, Seat & Spring for the E 1-1/2 & 3 hp engine. Made to the original specs. These are Made In The USA. BE SURE TO INSTALL THESE WITH THE SLOTS IN FRONT IN THE HORIZONTAL POSITION.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Push Rod for John Deere 3 hp.
|
|
|
|