|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Orient, United States
Igniter Trip Guide for 1HP IHC FAMOUS Hit Miss Gas Engine. goes on igniter trip rod. This piece bolts on the head and advance retards the timing on the igniter trip rod. I have been collecting hit miss engines for 35+ years and I am very knowledgeable.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original trip roller advance retard assembly for a 1hp IHC Famous or Titan engine. These parts in great shape and ready to use. There are no cracks, breaks, or welds. Check out the pictures and see if you need it.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a original governor weight bracket for a 4hp IHC Famous or Titan engine. It seems to be in great shape and ready to use. I am a real person who is easy to find. 3/8" mounting pin for weight.
0 bids Free Shipping
Condition: Used Location: Orient, United States
IHC Famous Pulley w/ Mounting Bolts. Pulley in good condition ready to use. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 1 1/8" D Hole. If you decide you don't want it or find another one cheaper, I won't take it back.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
I am pretty sure this is for a 2-1/2hp IHC horizontal engine. It is in great shape and ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. About 2-9/16" center to center on the mounting holes.
0 bids $15.05 Shipping
Condition: Used Location: Holgate, United States
I think this is an original detent for a 3hp IHC vertical engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
0 bids Free Shipping
Condition: For parts or not working Location: Holgate, United States
Here is an original head for a 1hp IHC Famous or Titan engine. There are no cracks, breaks, or welds on this head. The valves are stuck but should be easy to loosen up. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original Igniter for a 1hp IHC Famous or Titan engine. There are no cracks, breaks, or welds. There is only a very minimal amount of wear, this is a very tight low hour igniter. There is a chance the mica might need redone but it will certainly not need any machining to work right.
0 bids $15.50 Shipping
Condition: Used Location: Holgate, United States
I think this is an original detent for a 3hp IHC vertical engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
0 bids $17.10 Shipping
Condition: Used Location: Holgate, United States
Here is a carb for a 2-1/2hp IHC horizontal engine. It seems to be in good shape and ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. The mounting holes are about 2-3/4" apart on center.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a original governor weight bracket for a 6hp IHC Famous or Titan engine. That is just one the one edge and that couldn't be seen when on the engine. They had this bracket on a non governor flywheel so I guess they had to just adjust it a tiny little bit.
0 bids $17.10 Shipping
Condition: Used Location: Holgate, United States
This is a 2 piece governor weight bracket 3hp IHC vertical engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
0 bids Free Shipping
Condition: Used Location: Orient, United States
2 1/2HP IHC Famous /Titan Hit Miss Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 2 3/4" apart on center mounting. If you decide you don't want it or find another one cheaper, I won't take it back.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original push rod for a 1hp IHC Famous or Titan. The pin for the roller is just a little loose but it should be able to be peened over to tighten it up. The bolt for the rocker arm is stuck in the push rod but it should be very easy to loosen up.
0 bids $16.25 Shipping
Condition: Used Location: Holgate, United States
I think this is an original detent for a 3hp IHC vertical engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
Buy It Now
Free Shipping
Condition: Used Location: Elizabethtown, United States
I do not have fuel bowl cover but I know they are reproduced. 1 1/2" pipe thread.
0 bids $17.10 Shipping
Condition: For parts or not working Location: Holgate, United States
Here is an igniter for a 2-1/2hp IHC horizontal engine. It seems to be in great shape but it is stuck. I'd imagine it would loosen up very easily but I haven't tried to do anything with it. Check out the pictures and see if you need it.
0 bids $15.05 Shipping
Condition: Used Location: Holgate, United States
I think this is an original detent for a 2hp IHC vertical engine. The roller is a little sloppy on its mounting pin and may need to be redone to be really nice but it should work as it is. Take a look at the pictures and decide if you need it!
0 bids $17.10 Shipping
Condition: Used Location: Holgate, United States
Part No GA607. Here is an original fuel pump for a 4hp and larger IHC Famous or Titan gas engine. It seems to be in great shape and should be ready to use. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: For parts or not working Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated.
0 bids $15.50 Shipping
Condition: Used Location: Holgate, United States
Part No G1016. I think this is an governor weight for a 2hp and or 3hp IHC vertical engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is an original exhaust pipe flange 2-1/2hp and or 4hp IHC Famous or Titan engine. I cleaned up the threads with a pipe tap, a pipe will screw in just fine. Check out the pictures and see if you need it.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a original rocker arm for a 3hp IHC Famous or Titan engine. It looks like it has been repaired, looks straight and strong. Check out the pictures and see if you need it. For a 3hp IHC Vertical Famous or Titan.
Buy It Now
Free Shipping
Condition: New Location: Sherwood, United States
For your consideration is a governor weight for a 1hp International Harvester, or IHC 1 hp Famous/Titan or Tom Thumb hit miss engine. This weight is a reproduction but should function just fine. It mounts with a 1/4" pin.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
It is in great shape and ready to use. Check out the pictures and see if you need it. The bottom hole for the pin in the fuel pump plunger is 1/4". The top hole for the pin coming out of the cam is 3/8".
0 bids $18.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original piston for a 1hp IHC Famous or Titan engine or a Tom Thumb. It seems to be in great shape. It is missing a couple piston rings but those are easy to get. Check out the pictures and see if you need it.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a governor weight bracket for a 2-1/2hp IHC horizontal engine. It is in great shape and should be ready to use. Check out the pictures and see if you need it. The openings for governor weights are 1" wide.
0 bids $15.50 Shipping
Condition: Used Location: Holgate, United States
Part No G1016. I think this is an governor weight for a 2hp and or 3hp IHC vertical engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a original rocker arm for a 3hp IHC Famous or Titan engine. Should be ready to use. Check out the pictures and see if you need it. For a 3hp IHC Vertical Famous or Titan. I am a real person who is easy to find.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is a Connecting Rod for a 2-1/2hp IHC horizontal engine. It seems to be in pretty good shape. It is a little pitted on the wrist pin end but that will not hurt a thing and will not be seen when installed.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original head for a 1hp IHC Famous or Titan engine. There is a weld by the front igniter mounting stud probably could be cleaned up very nicely. It appears that the exhaust valve has had then broken off of it.
0 bids $17.10 Shipping
Condition: Used Location: Holgate, United States
Here is an original cam for a 2-1/2hp IHC Famous or Titan engine. It looks to be ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. That shaft is about 3-5/8" long.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a fuel pump for a 2-1/2hp IHC horizontal engine. It is in great shape and should be ready to use. Check out the pictures and see if you need it. Looks like it has a new plunger. I am a real person who is easy to find.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Head for 1HP IHC Famous or Titan Hit Miss Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 3/4" pipe thread for exhaust. 3 3/8" apart on center 4 hole mounting.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original fan assembly for a 1hp IHC Tom Thumb, Titan, or Famous. It is in great shape original condition with lots or original paint! Lots of original paint! I am a real person who is easy to find.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Part No G7537. Here is an cylinder or hopper for a 1hp IHC Hopper Cooled Titan or Famous. It seems to be in pretty good shape and should be ready to use. That can barley be felt by hand. It had great compression when it was together so it shouldn't be a problem at all.
0 bids $16.25 Shipping
Condition: Used Location: Holgate, United States
Here is an original cam for a 2-1/2hp IHC Famous or Titan engine. It looks to be ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. That shaft is about 3-5/8" long.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
It is in great shape and ready to use. Check out the pictures and see if you need it. The bottom hole for the pin in the fuel pump plunger is 1/4". The top hole for the pin coming out of the cam is 3/8".
0 bids $17.10 Shipping
Condition: For parts or not working Location: Holgate, United States
Here is a Piston for a 2-1/2hp IHC horizontal engine. The rings are stuck and it is a little rusty but it should clean up great with a wire brush. Check out the pictures and see if you need it. The wrist pin center is about 3-1/16" from the head of the piston.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated.
0 bids $15.50 Shipping
Condition: Used Location: Holgate, United States
Here is a original rod bearing and original bolts for a 3hp IHC Famous or Titan engine. I took this off a 3hp Famous so I know for sure that is what it fits. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original connecting rod for a 4hp IHC Famous or Titan. It seems to be in great shape and ready to use. There is a line on outside of the wrist pin area that could look like a weld but it is not.
0 bids $13.00 Shipping
Condition: Used Location: Belgium, United States
It is for the thermo syphon tank cooled engines and not the screen cooled engines as there is no eccentric to drive the water pump. It is in excellent condition with no cracks, breaks, or repairs and the teeth have no noticeable wear.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original push rod assembly for a 2-1/2hp IHC Famous or Titan engine. The compression release roller shifter works good. Check out the pictures and see if you need it. I am a real person who is easy to find.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
I am pretty sure this is for a 2-1/2hp IHC horizontal engine. It is in great shape and ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. About 2-9/16" center to center on the mounting holes.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Part Number G1005. Here is an original head 3hp IHC vertical Famous hit and miss engine. The valves look in and feel perfect, there doesn't seem to be any wear for the valves in their guides. No cracks, breaks, or welds that I can see or know of.
0 bids $17.10 Shipping
Condition: Used Location: Holgate, United States
Here is an original piston for a 4hp IHC Famous or Titan. Check out the pictures and see if you need it. The center of the wrist pin is about 3-1/8" from the top of the piston. I am a real person who is easy to find.
0 bids $18.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original piston for a 1hp IHC Famous or Titan engine or a Tom Thumb. It seems to be in great shape. Check out the pictures and see if you need it. I am a real person who is easy to find.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is an original igniter trip eccentric strap for a 4hp to10hp IHC Famous or Titan gas engine. Check out the pictures and see if you need it. I am a real person who is easy to find. Doesn't seem to have any wear.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a rocker arm for a 2-1/2hp IHC horizontal engine. It is in great shape and should be ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find. 7/16" pin to for push rod.
0 bids $10.40 Shipping
Condition: Used Location: Holgate, United States
Here is an original bearing cap for a 1hp IHC Tom Thumb, Famous, or Titan engine. Looks to be in great shape. Check out the pictures and see if you need it. I am a real person who is easy to find.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Here is an original head for a 1hp IHC Famous or Titan engine. There are no cracks, breaks, or welds on this head. It will need new valve springs and the seats and heads may need to be redone. Check out the pictures and see if you need it.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Detent Arm 1HP IHC Famous or Titan. Detent Arm is in good condition and ready to use. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. 7/16" mounting hole. If you decide you don't want it or find another one cheaper, I won't take it back.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Brass Fuel Pump for 15HP, 20HP or 25HP. Horizontal IHC Famous / Titan Hit Miss Gas Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. I apologize for any inconvenience.
0 bids $9.00 Shipping
Condition: Used Location: Holgate, United States
Here is a rocker arm bracket bracket for a 2-1/2hp IHC horizontal engine. It is in great shape and should be ready to use. Check out the pictures and see if you need it. I am a real person who is easy to find.
0 bids $16.25 Shipping
Condition: Used Location: Holgate, United States
Here is a very nice original governor weight for a 4hp IHC Famous or Titan engine. 3/8" mounting hole. I am a real person who is easy to find. 7-3/4" wide at widest point. Hard part to find.
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Part Number G1005. Here is an original head 3hp IHC vertical Famous hit and miss engine. The valves look in and feel good, and only seem to have a small amount of normal wear. The rocker arm stand has been repaired.
0 bids $15.05 Shipping
Condition: Used Location: Holgate, United States
Here is an original governor sleeve that is for a 3hp vertical IHC Famous hit and miss gas engine. Take a look at the pictures and decide if you need it! I am sure there are other excuses also but I don't care and don't want to hear them.
|
|
|
|