|
|
Order by: |
Buy It Now
$9.50 Shipping
Condition: New – Open box Location: North Kingstown, United States
AC PWR CORD, 3 PRONG RIGHT ANGLE TO BARE ENDS. 18/3 SVT 80" LONG BLACK.
Buy It Now
Free Shipping
Condition: New Location: Harrisonville, United States
Condition is new You will get 129 seals Ships usps See photos for accurate description and information Thanks and stay safe Shelf location tool m
0 bids $8.50 Shipping
Condition: Used Location: Billings, United States
26 Series Rectangular Power Connector. Pitch Spacing: 4.57mm.
0 bids $7.50 Shipping
Condition: Used Location: Roswell, United States
Used sensor, needs to be tested prior to installation Sold as is, no returns
0 bids $89.20 Shipping
Condition: New Location: , SG
Item ID: C3235. Part Number: 3700-01465. the order will be automatically relisted. We will review and approve your price match request on a case by case basis. We also do not price match against sites with on-going flash sales.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 12" of Fiberglass Leads. 60 Watts and 120 Volts. P/N: CH020117.
0 bids Free Shipping
Condition: Used Location: Middletown, United States
0 bids Free Shipping
Condition: Used Location: Eastlake, United States
One used Sturtevant Jaw Crusher 4" x 8", 3 hp motor, belt driven, on a stand. Ask for Bob Wells.
Buy It Now
Free Shipping
Condition: New – Open box Location: Rochester, United States
For sale is a GEA Pressure Washer Jet Wash Nozzle 1182-6710-320 1.0mm Jet. Item appears new and in excellent condition. May show minor imperfections from shelf wear but nothing that will impact performance.
Buy It Now
Free Shipping
Condition: Used Location: Millwood, United States
Installed to stainless steel portable stand with a base area of 30" X 40". 7.5HP V-belt drive, 1765 RPM severe duty motor. Unit is gravity fed with tilt pan. ITEM #: 20248.
0 bids Free Shipping
Condition: New Location: Little Falls, United States
Green and Red leds.
Buy It Now
Free Shipping
Condition: New – Open box Location: Wolcottville, United States
MPN: 24WJ11. Model: 84CNA. A semi truck can not easily pull into and turn around.
Buy It Now
Free Shipping
Condition: New – Open box Location: Kansas City, United States
This item is new & unused. Model : P030625-016-190. Local Pickup. MPN : P030625-016-190. Order Cancellations.
Buy It Now
Free Shipping
Condition: New – Open box Location: Cedarburg, United States
DONALDSON TORIT. NEW NOT IN BOX.
0 bids Free Shipping
Condition: Used Location: Willoughby, United States
KASON BAG DUMP STATION WITH 40” SIFTER MODEL KBD540SS,statinless steel !
0 bids $20.00 Shipping
Condition: New Location: Santa Ana, United States
12.8 Mixing Propeller, any size bore , NEW. Made USA. 316 stainless steel. Condition is New. Shipped with Flat Rate Freight. Balanced propeller
0 bids Free Shipping
Condition: For parts or not working Location: Hillsboro, United States
Item is being sold for parts or not working. International Information Will show wear and tear. Batteries are missing and it's taken apart.
0 bids Free Shipping
Condition: New Location: Maricopa, United States
0 bids $97.26 Shipping
Condition: Used Location: Ferndale, United States
Parts: STK21 9/2. You are looking at used part off of a "HOLZHER SPRINT 1417 ". This part was removed off of a used, working machine. You will receive everything that you see in the pictures. & MS1 8.5/2.
Buy It Now
$24.99 Shipping
Condition: Used Location: Framingham, United States
0 bids $5.55 Shipping
Condition: For parts or not working Location: Rancho Cordova, United States
We are unable to test and due to these issues, we are offering this unit for sale AS-IS, primarily for parts or repair, as it is non-operational and may be incomplete. We have not conducted any further testing or inspections, which means there may be additional, undiscovered issues with the item. Please refer to all item photos to assess the unit's condition. Pictures are of one of the actual units available. The unit is in our possession and ready for immediate shipping. If you have any questions or need additional information, please don't hesitate to contact us..
0 bids Free Shipping
Condition: Used Location: Milaca, United States
Tested good. Came from running equipment.
0 bids Free Shipping
Condition: For parts or not working Location: Atlanta, United States
Well, I will give you a few reasons:1. DONT BUY IF YOU CANNOT REPAIR. BY PURCHASING THIS ITEM YOU UNDERSTAND THAT THE ITEM CONDITION IS FOR PARTS OR NOT WORKING: This is An item thatdoes not function as intended and is not fully operational (non-functional).
0 bids Free Shipping
Condition: Used Location: Gilbert, United States
Everything included is pictured, nothing more. We will work to resolve issue promptly.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
The actual size is 6x12". Three magnets with grate on top. Lift Tables. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Free Shipping
Condition: New Location: Buffalo, United States
Buy It Now
Free Shipping
Condition: New Location: Racine, United States
200 yards of material on roll. Roll width: 20".
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 12" of Fiberglass Leads, with a ground wire. 275 Watts and 120 Volts.
0 bids Free Shipping
Condition: New – Open box Location: Knoxville, United States
REVERSE OSMOSIS ELEMENT.
Buy It Now
Free Shipping
Condition: New Location: Metuchen, United States
20 mm Thick. Machined aluminum roller. Bore: 0.39" (10 mm). Made out of solid aluminum.
0 bids Free Shipping
Condition: Used Location: Apollo, United States
0 bids $80.00 Shipping
Condition: Used Location: Sun Valley, United States
If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE. This item is as seen in pictures.
Buy It Now
$5.95 Shipping
Condition: New Location: Scottsdale, United States
This mixer features a interchangeable bell. Sold in bags of 10 pieces. Aluminum or plastic retaining nuts are used to hold in place. Note thread for these are usually 7/8- 14 fine or 7/8-9 coarse thread as pictured.
Buy It Now
Free Shipping
Condition: New Location: , China
Mixer Section.
Buy It Now
Free Shipping
Condition: New Location: Farmingdale, United States
Clippard 11752-5 Pneumatic Fitting. FREE EXPEDITED.
0 bids $14.00 Shipping
Condition: New Location: Detroit, United States
0 bids Free Shipping
Condition: New – Open box Location: Denver, United States
0 bids $15.00 Shipping
Condition: New Location: Port Saint Lucie, United States
(FL HANGAR OFFICE RACK B x3).
Buy It Now
Free Shipping
Condition: New Location: Granville, United States
It also features a 34mil feed spacer for better resistance to particulate and biological fouling. Active Area: 400 ft2. End Cap Material: Interlocking iLEC™. Features nano-filtration technology.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Carolina Conveying Rotary Blow-Thru Airlock Feeder Valve 8x8" Round Flange 460V Carolina Conveying. Carolina Conveying Chain Drive Rotary Airlock Blow-Thru Feeder Valve. In good used condition. Tested @ 460V.
0 bids $99.00 Shipping
Condition: Used Location: Livingston, United States
Schenck Accurate Feeder Helix Screw Auger about 2-3/8 Inch Dia Stainless Steel Length: 60+4 inches Thread: 5/8-8
0 bids Free Shipping
Condition: New Location: Indianapolis, United States
Serial#: 1666674. Condition: New, sealed part.
0 bids Free Shipping
Condition: New – Open box Location: Clarksburg, United States
This includes securing item with steel banding and shrink wrapping. Size range : 0.919” / 0.920” to 1.019”.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
P/N: CH034369.
0 bids Free Shipping
Condition: New Location: Aberdeen, United States
Product Type: Maximum Performance Glass Transmission Spin-on. Application: Allison Transmissions. Compatible Competitor Part Number: Allison 23042062.
0 bids Free Shipping
Condition: New Location: , SG
Item ID: C3430. If there are more than (1) quantity, do feel free to reach out to us for an actual image of each unit. Part Number: 713-011579-001. Condition: New. We will review and approve your price match request on a case by case basis.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
250 Watts 220 Volts.
0 bids Free Shipping
Condition: New Location: Gilbert, United States
Buy It Now
Free Shipping
Condition: New Location: Breezewood, United States
1 set of 8 burn in sticks. Broken or not they are still capable of being used. # 28 Orange Maple. # 25 Light Red Mahogany. # 16 Cherry. # 30 Dark Oak.
Buy It Now
$149.00 Shipping
Condition: New Location: West Bend, United States
0 bids $6.00 Shipping
Condition: New – Open box Location: Fenton, United States
Circle Shape. - Stainless Steel. Circ saw demolition blades tile blades plumbing tools hvac tools. Parker Fittings by the 100s. Many, many different abrasives, sanding paper, cloth, belts, discs.
0 bids Free Shipping
Condition: New – Open box Location: Millersburg, United States
Part Number 1135 F1B1B1E5. Lift Tables. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. Country of Manufacture USA.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
This is a durable blast gate to shut off suction at the splitter or collector. Open the easy sliding gate to allow air flow to the machine you are working with. Replaces Jet JW1007. Durable blast gate to shut off suction.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Cantilever Racking. Filtration Group EZ-112-E-150-2P #2 Bag Filter Stainless Basket Strainer 2" NPT Filtration Group. Lift Tables. For #2 bag filter. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids Free Shipping
Condition: New Location: Tampa, United States
By changing the sieve, the material size is up to 10mm, 6mm, 3mm. Production Detail. ▲ 6 months' warranty for the machines, not for the consumables. Hope for your understanding.
Buy It Now
Free Shipping
Condition: New Location: Port Sanilac, United States
PN: R039119B2G030M.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Suction Strainer, Compatible with Grainger Part Number 5PXC2, 5PXC5, 5PXG4, 5PXG7. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
130 Watts 120 Volts.
0 bids $15.50 Shipping
Condition: Used Location: Cedar Grove, United States
You will be getting exactly what you see in those photos.
0 bids $30.00 Shipping
Condition: New Location: Santa Ana, United States
Mixing Propeller, 10" 4 blade , 3/4 - 1 5/8 inch bore ,can make just about any size bore. Just ask. NEW. Made In USA. 316 ss. Condition is "New". 10 inch 1 inch or any size . Also have 11, 12, 13, 14 15, 16, 17 diameters.Just message me. Have other sizes just ask.
|
|
|
|
2" x 1.5" Concentric Reducer Ferrule Sanitary Tri Clamp SS304 Fitting Ferrules Inventory from a closed dairy supply 2 inch pipe to 1.5 inch adapter 304 Stainless Free shipping My stores: stores.shop.ebay.com/T-Shirts-and-Shiny-Shoes OR. HGSSupply Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
REDUCED PRICE! Pulvocron Size PC76 S.O. 3328 Model PC 76-A Powered by a GE Custom 8000 electric motor 500 HP 460 Volt 3 phase 1180 RPM Frame 8288S Type K BB Pulvocron comes with Westinghouse Reduced Voltage Starter. There are pictures of it also. Item is in good condition. We will load on your truck at no extra charge. If you have any questions please call Mike 618-407-1416 The PULVOCRON © pulverizer. First introduced in 1958, is an air swept. Combination pulverizer/classifier with external fineness adjustment during operation. Known for its versatility. The Pulvocron can pulverize in the medium- fine. Fine, and ultra-fine particle size ranges down to 10 micron top size with only minor adjustment. Ease of particle size adjustment. Accessibility for maintenance,and minimum installation ... morerequirements are just a few of the advantages inherent in the Pulvocron pulverizer. for more information visit bepex rate technology systems website.
|
|
|
Used 350 gallon Stainless Steel tank. Cone bottom, 1 1/4 sanitary T, 4 baffles, lid, 46 1/2" diameter x 48" deep x 65" height from the ground, has four(4) legs. Folding lid has a slight bent on the motor side. Easy to straighten. SS pharmaceutical quality. Agitator: 3hp portable Eastern agitator. Model R6-8 1 1/4" x 48" SS shaft with 16" SS impeller. 3hp Baldor motor 208/230/460 volts. This unit is clean and ready to use. MADE IN USA Shipping: Buyer pays shipping. Will be mounted on two pallets. Strapped and wrapped, Weight: approximately 550 lbs Local pickups welcome Will deliver to any local fright carrier of your choice at no charge. Shipped from Ventura. CA 93001 There are two(2) tanks available. Each at $3,750.00 or best offer
|
|
|
Inventory# SD2167 Manufacturer: New Holland Model# K24 Basket Size: 12" x 12" HP: 1 Serial# 898266 Volts: 220 Amps: 4.2 Phase: 3 Max Load: 75 Basket Speed: 825 Forward and reverse with timer. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
This is some kind of filter marked Scanlon Morris Co. Madison. Wisconsin USA. It measures 10" top to bottom. Glass is 3.5" diameter. This has been stored in garage for many years and will need clean up, etc but we don't know if it is used or not. Research shows that this might be for a high pressure sterilizer. It is made of brass, chrome plated and glass. Feel free to ask questions or give information. Immediate payment required even if you make an offer and we accept. No e-checks. Thanks and good luck.
|
|
Hopper You are bidding on one Flake Flexicon Hopper. Item is used. But in good condition. The unit shows signs of cosmetic wear, including scratches and scrapes, that will not affect the unit's function. The handle on the top is slightly bent. The top opening is 36" by 36" The bottom has been modified. The opening in the bottom is about 12" by 17" The distance between the top and bottom is 20" Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence or a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($25 packaging fee added ... moreto total) or we can provide a competitive quote to the buyer. Shipping weight 200 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13e93cede4c-0xfd-
|
|
|
BLUE M OVEN MP-246AS-FHP. IN EXCELLENT CONDITIONS, WAS USED IN PRINTED WIRE BOARD R&D. 208/240V. 1 PH, 60 V. Tmax = 315 C.
|
|
|
Sweco 30" Screen 400M Stainless& Rubber Gasket Very Good Condition Description Sweco 30" Screen 400 Stainless Mesh Includes Rubber Gasket Very Good Used Condition 1 small rust spot. Shipping Terms Shipping cost includes full insurance and packaging. If you need expedited or have any other shipping questions please contact us. Auctions totaling $250 and above will be shipped with signature confirmation. Items will generally ship next business day after cleared payment. Excluding weekends and holidays. For Minnesota shipping addresses or Pickup at our warehouse 7.125% sales tax will apply. Return Policy 14 Day Guarantee. Buyer pays return shipping. Payment refunded to original payment method. All returns except for defective items will be subject to a 20% restocking fee.
|
|
|
Manufacturer: FESTO Model: CPV-10-VI CPV10-GE-MP-E. 8) Eight 161414 Units. Shelf I.D. 10. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13ef2293e2c-0xf3-
|
|
|
Manufacturer: SMC Model: MHL2-16D. Press. 0.1- 0.6 MPa. Shelf I.D. 10.
|
|
|
Manufacturer: Infitec Model: CS5-449. Shelf I.D. 10
|
|
|
Manufacturer: Novatec Model: 1-1/2" STA. VLV. Capacity: 24 Volt. Date of MFG: 2005. Shelf I.D. 13.
|
|
|
Manufacturer: Novatec Model: 2" STA.VLV. Capacity: 115 Volt. Date of MFG: 2005. Shelf I.D. 13. O`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13ef44cb3b0-0xf6-
|
|
|
Manufacturer: Incoe Corperation Shelf I.D. 20.
|
|
|
Used. Fully serviceable Mojonnier Bros Gearboxes. Model: 465L4 Discounted rate for bulk purchase.
|
|
|
SEE PICTURES FOR DETAILS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
10" 304 Stainless Steel slide Gate Valve A-C Valve used Posted with
|
|
ITEM NUMBER: 6851 GEARBOXES: Falk Gearbox 1750/84 RPM for Ribbon or Paddle Blender MODEL NUMBER: 2070FZ2AS Falk gearbox MO 97-033031-01 20.54 ratio RPM IN/OUT 1750/84 Service Factor 1.41 HP Rating 84.8 Built 9-97 I describe everything to the best of my ability. BUT if you have any questions at all please remember to ask them before you bid. You may email or call 978-669-0060. All items are sold as is and shipping is at the buyers cost, unless otherwise noted. Returns gladly accepted, within 3 days, if I have misrepresented the item. Payment due within 7 days of auctions end. Personal Checks. Money Orders or Cash, Credit Cards or Paypal only, unless previous arrangements are made. I can take most major credit cards directly. Personal Checks held 10 days. UPS is our preferred shipping method. ... moreWe charge ssomewhere around actual cost unless the items need to be crated or there are unusual shipping requirements. We deal in all sorts of plastic machinery. Twin and single screw extruders we have both new and used parts. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment auctions. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner. MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer. We will help with getting a trucking company if needed. Thanks for looking! Thanks for looking! Insurance is your choice. But we do recommend it, as you are responsible for the item once it leaves our hands. If the item is too large to ship UPS, we can ship by truck or van line or whatever arrangement you may prefer. We can help you obtain a truck if needed Thanks for bidding and have a great day! Please see our other auctions. No I won’t take your 3 rd party bogus bank check and wire you the excess funds immediately!
|
|
|
Manufacturer: SMC Model: SY5120-5DZ-01T. 0.15-0.7MPa. Shelf I.D. 15. This auction is for two units as in the picture! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f0aa2fa82-0x105-
|
|
USED PORT SIZE: 19-1/2" S/S SHAFT AND BLADES APPROX 124" TANK DIA APPROX 191" HEIGHT VERTICAL TANK 7.5 HP RELIANCE MOTOR MIXER TAG IS NON READABLE OVERSIZED: 135" OVERALL LENGTH X 130" DIA MUST SHIP FLATBED SEE PICS APPROX SHIPPING WEIGHT: 7000 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% ... moreRESTOCKING FEE ON ALL RETURNED ITEMS. AJ. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Approx. 25 gallon. Portable balance tank. Four(4) 2” Tri-clamp side inlets and two(2) 1.5” bottom side outlets. Tank on three(3) legs w/ swivel casters. Approx dimensions: 23.5”ID x 13”D x 20”OAH f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f129d55b3-0xdd-
|
|
|
Inventory# SD2216 Manufacturer: Nobles Model# 29T60.7 Basket Size: 12" x 12" HP: 2 Heat: Steam Volts: 48 Amps: 20.5 Phase: 3 Max Load: 100 Basket Speed: 725 For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Inventory# FP2114 Manufacturer: Emico Model# MA3002 Number Plates: 17 Plate Size(mm) 800 Gasketed/NonGasketed: Gasketed OAD: 48"L x 44"W x 48"H x 2 Description: Used Filter Press Plates Plates are 31.5"L x 31.5"W x 2.75"H. Includes 1 tail plate. Model M3004. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
GRAHAM HELIFLOW HEAT EXCHANGER 15WXA-14L. Very Nice unit.
|
|
ITEM# 11817 USED FULLER SUTORBILT 4M BLOWER SERIES 4- MEDIUM PRESSURE HORIZONTAL- RIGHT HAND CONFIGURATION. MODEL: 4M-B-S, SERIAL NUMBER: 195873. INCLUDED INLET SILENCER, 6" DOUBLE GROOVE SHEAVE, NO MOTOR. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact ... moreus to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 11816 USED FULLER SUTORBILT 4M BLOWER SERIES 4- MED PRESSURE HORIZONTAL MODEL 4M-B. SERIAL NUMBER: 198547. INCLUDED INLET SILENCER. 6" DOUBLE GROOVE SHEAVE, NO MOTOR. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements ... moreat your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Used- Chemineer Moduflex Top Entering Agitator. Model MDP-250-731. Ratio 31 to 1, 56 rpm. Approximate 3” diameter x 90” long 316 stainless steel shaft with a 6 blade turbine. Driven by a 25hp, 3/60/208-230/460 volt, 1760 rpm motor. ref# 44119054 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
HOTWATT AIR PROCESS HEATER 750W/190W 240V/120V AH75-6MF THANK YOU! Thank you for viewing our items. If you would like to receive updates of our new listings. Please click here and subscribe for our bi-weekly newsletter. Visit our webstore at Burchams Surplus. IMPORTANT SHIPPING INFORMATION! FedEx is our standard carrier* but we are happy to negotiate other shipping arrangements. USPS Priority and UPS shipping are available upon request. Please contact us for details. Our standard carrier to Canada is USPS Priority. DESCRIPTION: This auction i s for a HOTWATT AIR PROCESS HEATER 750W/190W 240V/120V AH75-6MF! Model# AH75-6MF Condition: Used surplus in fair cosmetic condition with medium to heavy signs of wear. Additional description: This item is unused. But there is a small dent in the sheath(see ... morephotos) More Info on the Web: This item retails for about $0.00. If this listing is for a multiple quantity of like items we guarantee the item you receive will be the matching model number and in as good or better condition than the auction photo and description. For warranty information on this auction please refer to the"Returns" details above. For full details please review Warranty& Returns. OUR PROMISE: Burcham's Metal's of Albany. OR has been in business for over fifty years with an established presence on eBay for over twelve years. Burchams Surplus is our eBay store. As an experienced eBay seller it has been our privilege to provide thousands of customers with affordable products and professional service. It is our aim to provide you with a superior eBay buying experience. We do our best to accurately describe each item for sale. Contact us before you bid so that we can answer all your questions about an item before you purchase. We are committed to customer satisfaction through fair surplus pricing. Fast, affordable shipping and professional packaging. We appreciate your business and we want you to come back! Here is what some of our recent customers have to say about us: Great Transaction!
|
|
|
one) Sanitary reducer. Tri Clover type, 4" x 3" 5" long, used. $10 shipping in the continental U.S. You can send text messages to my cell phone at 9374165497@vtext.com D-10087 If you have any questions. Please email me! Happy bidding! Click to View Image Album Shipping& Handling US Shipping. $10.00 UPS Ground International Shipping. $75.00 USPS Priority Mail International FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
NEW YORK PRESSURE BLOWER MODEL 2610 30 HP LIKE NEW MIKE 216-374-7262
|
|
RC Listing is for one ERIEZ MAGNETICS Grate Magnet NO TAG Roughly 7 3/4" to 8" Round Opening OVERALL SIZE: 19" Long x 18 3/4" Wide x 16 1/2" High Item Appears in Good Used Condition. Surface Dirt/Wear Please call or email any additional questions. Thank you! Visit to see our ever changing inventory of sawmill. Industrial and process related equipment and machinery. Contact Maine Equipment Connection 1098 Crystal Road Island Falls. ME 04747 207-694-1635 www.maineequipmentconnection.com SHIPPING DETAILS All items sold are shipped FOB our Island Falls. ME location, unless otherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's shipping needs are unique, shipping costs and methods will ... morevary by item and customer. Shipping details will be configured at time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 04747 TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(THE EQUIPMENT CONNECTION and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of ant item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best to describe each item the best that we can. We strive to maintain a high feedback score and we are always willing to work with you on any problem. So please contact us before you resort to leaving negative feedback. Thank you.
|
|
RC Listing is for one CE BAUER MAGNA CLEANER LIQUID CYCLONE MODEL 641- 26 Serial 871412 Item Appears in Good Used Condition Please call or email any additional questions or for more detailed information. Thank you Visit to see our ever changing inventory of sawmill. Industrial and process related equipment and machinery. Contact Maine Equipment Connection 1098 Crystal Road Island Falls. ME 04747 207-694-1635 www.maineequipmentconnection.com SHIPPING DETAILS All items sold are shipped FOB our Island Falls. ME location, unless otherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's shipping needs are unique, shipping costs and methods will vary by item and customer. Shipping details will be configured at ... moretime of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 04747 TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(THE EQUIPMENT CONNECTION and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of ant item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best to describe each item the best that we can. We strive to maintain a high feedback score and we are always willing to work with you on any problem. So please contact us before you resort to leaving negative feedback. Thank you.
|
|
|
BLUE M MODEL DCI-146-B-ST550 INERT GAS MECHANICAL CONVECTION OVEN Specifications: Type.Inert Gas Mechanical Convection. Applications.Aging.Drying,Controlled Atmosphere,ASTM Testing. Temprature.15c Above Abmient to 350c(650deg) Classification.NFPA 86 Class B. Typical Performance.Run Up to 300c for 60 min or less. Approved Inert Gases.Argon.Carbon Dioxide,Helium,Nitrogen. Interior Volume.1.6 cu. ft. Interior Dimensions.14" x 14" x 14" Recommende Gas Flow Rate: Purge(SCFH) 100 SCFH For 11 Min. Run(SCFH) 20. Voltage.208/240v. 1ph. Equipped With: Chamber Pressure Relief Valve. Inert Gas Control System and Supply Connection. Temperature Gague. Blue M ST 350 Controller. Any Questions Please Feel Free To Call Us 323-589-6721 or 888-589-6721.
|
|
RC Listing is for one JOINER SYSTEMS INC Butterfly Damper 34" I.D. x 12" F/F Weight 375 Pounds Made for Biothermica October 2003 DWG# 03-288-01 With ROTORK RSR12505 S/N PD156201 Design Operating Pressure 80 PSI/kPa Max Safe Pressure 125 PSI/kPa Item Appears in Good Used Condition Please call or email any additional questions. Thank you! Visit to see our ever changing inventory of sawmill. Industrial and process related equipment and machinery. Contact Maine Equipment Connection 1098 Crystal Road Island Falls. ME 04747 207-694-1635 www.maineequipmentconnection.com SHIPPING DETAILS All items sold are shipped FOB our Island Falls. ME location, unless otherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's ... moreshipping needs are unique, shipping costs and methods will vary by item and customer. Shipping details will be configured at time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 04747 TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(THE EQUIPMENT CONNECTION and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of ant item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best to describe each item the best that we can. We strive to maintain a high feedback score and we are always willing to work with you on any problem. So please contact us before you resort to leaving negative feedback. Thank you.
|
|
|
Telemecanique XCK-P118H7. IEC 337-1, 1554A14 Posted with
|
|
ITEM# 11804 USED INDUSTRIAL MAGNETICS DEPALLETIZER/ TRANSPORTER- RARE EARTH PNEUMATIC OPERATED- SUSPENDED MAGNET. 5000LB SINGLE LIFT LUG, AIR TUBING, NO CONTROLS. MAGNET HOUSING DIMENSIONS: 13-1/8" W X 18-7/8"L X 4-1/2"H. MFG. DATE: JAN. 2005. AIR REQUIREMENTS: 75- 100PSI. CAPACITY WILL VARY DEPENDING ON SIZE AND SHAPE OF ITEM(S) LIFTED. THESE UNITS ARE A CUSTOM DESIGN. PRICED EACH. TEST RUN VIDEO ON FILE. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or ... morewire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f2118e9b3-0xa4-
|
|
ITEM# 11803 USED 24" STAINLESS STEEL CYCLONE- INSULATED 6"Ø INLET SLEEVE. 9"Ø SQ. FLANGED BOTTOM DISCHARGE, 10"Ø FLANGED CLEAN AIR OUTLET, 65" OVERALL HEIGHT. INCLUDES MOUNTING SUPPORT LUGS AND APPROXIMATELY 3" OF BATT INSULATION WITH OUTER PLASTIC COVER. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your ... moreeBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f2118e92e-0xf4-
|
|
ITEM# 11811 Alanco Environmental Mfg. Dust Collector- Model 124RPL10 SERIAL NUMBER: 509F102. COLLECTOR HOUSING DIMENSIONS: 33'5" TALL X 9'6" DIAMETER. CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to ... moremake those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f2118e9c7-0xfa-
|
|
ITEM# 11810 USED ROLFES DUST COLLECTOR ALL CARBON STEEL CONSTRUCTION. DUST COLLECTOR APPROXIMATE DIMENSIONS 39'8"L X 9'8" DIA. APPROX. DIA. OF TOP CROWN AREA ONLY 9' 8" ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make ... morethose arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Fulton Electric Steam Boiler Boiler# 99488 Model# FB-030-L Year: 2005 Lbs/Hr: 105 MWP: 100 Volts: 460 Phase: 3 Kw: 30 Amps: 40 Control Voltage: 110 See Pictures For More Details Feel free to make an offer! For any other questions feel free to ask! All offers will be reviewed! Buyer must arrange and pay for freight. For a shipping quote Please contact us Local Pickup is available at zip code 45039 Residents of Ohio pay a 6.5% tax. All items are Sold"As Is" No Warranty. Items must be picked up personally or by freight within 30 days or the items will be considered forfeited to us. I will consider all reasonable on any of my store items. Check out my! New items posted daily!
|
|
|
1.5" 90 Degree elbow Ferrule Sanitary Tri Clamp SS304 Fitting Ferrules Inventory from a closed dairy supply 1 1/2 inch pipe fitting 304 Stainless Free shipping My stores: stores.shop.ebay.com/T-Shirts-and-Shiny-Shoes OR. HGSSupply Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
One used Manesty B3A Rotary tablet press. 16 station, keyed head, B tooled, 6.5 Tons compression force, 42,000 max output. 16 mm max tablet diameter, 2 HP/3 Phase/60 cycles 230V VSD plus additional 480V VSD included.
|
|
Hi-Vac Model 240 Portable Vacuum System. 40 HP, for dry or wet material, 1,653 hours Hi-Vac 240 Series vacuum systems move dry material. Wet material or liquids through up to 300 feet of vacuum hose or a Hi-Vac designed in-plant piping system using a powerful 18” Hg vacuum producer. Material is separated from the air stream with a patented 3 Stage Filtration System including a Primary centrifugal separator which spins the air, causing most of the material to drop out of the air stream into the end dump hopper below. Air then moves through a Secondary linear separator, which causes the air stream to speed up and change direction, dropping smaller fines and entrained moisture into the hopper. Finally, the air stream enters the dust collector housing where it passes through 12 envelope style ... morefilter bags before moving into the vacuum producer and out into the atmosphere through an exhaust air silencer. 240 Series units are equipped with easy to use controls and instrumentation for operation and monitoring performance to protect critical components. The Model 240's 40 horsepower motor and positive displacement rotary lobe type vacuum producer provide the following performance specifications: Horsepower: 40 HP(30 KW) Vacuum Rating: 18" Hg(457 mm Hg) Air Flow: No Load = 812 CFM(1380 m 3/hr) Full Load = 646 CFM(1098 m 3/hr) Conveying Rate: Nominal = 200 lbs/min. 90.7 kg/min. Maximum = 400 lbs/min. 181.4 kg/min. Conveying Distance: Nominal = 100 ft. 30.5 m. Maximum = 300 ft. 91.5 m. Sold As Is Where Is. Subject to prior sale by owner. FOB Somerset. PA. 0 0 1 42 241 GE Zymboly LLC 2 1 282 14.0 Normal 0 false false false EN-US JA X-NONE International Buyers Please Note: Import duties. Taxes and charges or shipping charges are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
|
|
|
INCLUDES(1) PARKER HANNIFIN VALVE 262200 VDP 11 POD 92 ALL ITEMS THAT REQUIRE EXTRA SHIPPING DUE TO LOCATION WILL BE CHARGED THE EXTRA AMOUNT. VISIT OUR STORE FOR ALL OF YOUR INDUSTRIAL SURPLUS NEEDS OR CALL US AT(515) 832-5701. J 3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f3718e7ad-0xfc-
|
|
J. Little Mercer Co. Inc. 150 GALLON 316 STAINLESS STEEL JACKETED KETTLE Stock Number: E-3878 Mfg. Groen Model T\150 SP. 316 stainless steel National Board stamped. Jacket rated for 80 psi@ 325 F 3 inch tri-clamp bottom center outlet Converting from tilt to stationary. Stands included. 5) available. Picture shows one just converted. Jacket has been pressure tested. Price is for one! Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! ... moreAll of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
INCLUDES(1) APPLETON UNLET 3" LB FORM 35 ALL ITEMS THAT REQUIRE EXTRA SHIPPING DUE TO LOCATION WILL BE CHARGED THE EXTRA AMOUNT. VISIT OUR STORE FOR ALL OF YOUR INDUSTRIAL SURPLUS NEEDS OR CALL US AT(515) 832-5701. J 8
|
|
|
INCLUDES(1) INTAKE VALVE ASSY VOO2060 SK-19718 ALL ITEMS THAT REQUIRE EXTRA SHIPPING DUE TO LOCATION WILL BE CHARGED THE EXTRA AMOUNT. VISIT OUR STORE FOR ALL OF YOUR INDUSTRIAL SURPLUS NEEDS OR CALL US AT(515) 832-5701. J 8 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f39acc864-0x104-
|
|
|
INCLUDES(1) TRACK ROLLER 642793 ALL ITEMS THAT REQUIRE EXTRA SHIPPING DUE TO LOCATION WILL BE CHARGED THE EXTRA AMOUNT. VISIT OUR STORE FOR ALL OF YOUR INDUSTRIAL SURPLUS NEEDS OR CALL US AT(515) 832-5701. PALLET
|
|
|
USED- Netzsch Horizontal Media Mill. Model LIN16, Carbon Steel. Approximate 9" diameter x 14" long jacketed chamber. 16 liter(4.2 gallon) capacity. 4 1/2" diameter cored shaft with a peg style rotor. Driven by a 7.5 KW(10 HP) 3/50/380 Volt, 1740 RPM manual vari-speed motor. Base mounted with control panel. ref# 86693 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED: Klein Henkhaus Double Cone Vacuum Dryer. Approximate 12 cubic foot working capacity(17 total) 321 stainless steel. Internal rated FV at 150 deg C(302 F) carbon steel jacket rated 2.5 bar(36 psi) at 150 deg C(302 F) 39" diameter x 14" straight side x 16" and 22" cones. 16" diameter top inlet with cover. 8" center bottom outlet with valve. Driven by an approximate 1 hp, 3-50 hz varispeed motor. Mounted on carbon steel legs. Built 1973. ref# 86692 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED- Fitzpatrick Fitzmill. Model D6, 304 Stainless Steel. 16) 410/416 stainless steel double impact swinging blades, 6" x 11" cutting chamber. Requires bottom screen. Gravity fed modified feed throat with hopper. Driven by a 3 HP, 3/60/230/460 Volt, 1715 RPM motor. Mounted on a carbon steel frame with casters. ref# 86611 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED- Mikro Pulverizer. Carbon Steel. Approximate 20" diameter x 12" wide rotor with 16 rows of 4 swinging stirrup hammers. 13" x 15" top feed with 304 stainless steel hopper, triple screw chamber feed, approximate 2" diameter x 8" long screws, driven by a 1 1/2 HP, 3/60/230/460 Volt, 1750 RPM XP gearmotor, ratio 3.6:1. Main drive is a 30 HP, 3/60/208-220/440 Volt, 3545 RPM XP motor. Includes bottom screen. Unit mounted on a carbon steel frame. ref# 86594 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
USED- Mikro Pulverizer. Model 2MP, 304 Stainless Steel. Approximate 8" diameter x 6" wide rotor with(2) rows of swinging stirrup hammers. Feed housing set up for screw feed, no screws or drive. Mounted on a carbon steel base. Unit requires legs and approximately 20 HP motor. ref# 86568 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
Branson Ultrasonic Cleaning System TDR-35 Consists of three individual tank stations for cleaning. One tank equipped with 3kW ultrasonic cleaning power. Each tank compartment measures 16" x 20" x 19" deep overall with a 13" max working depth. Each tank is equipped with its own bottom drain and water feed. A cover for each tank is also supplied. This system can be used with or without the transporting mechanism. The tank system could be used for a hand dipping operation if desired. This machine was in operating condition when it was shut down in January. 2013. Machine is ready to ship. We will load it on the truck. Just set the tanks in place. Set the transporter frame next to the tanks, plug it in and its ready to work. Machine is complete with programmer keypad and installation ... moremanual. The TDR-35 uses a cantilevered conveyor system that transfers parts from one location to another during the Branson cleaning operations. The microprocessor based. Material handling system is especially designed for clean rooms. Its unique feature is its prevention of overhead contamination and particulate generation so that your components come out clean and stay clean. The TDR-35 is also smart. Simple to use, flexible and fully programmable. Specifications as follows: Electrical Requirements: 120 VAC. 1 ph, 60 Hz +/ 5% Maximum Power: 400 watts per head at max load Travel Speed: Slow Fast Vertical 10 ft/min 20 ft/min Horizontal 20 ft/min 40 ft/min Maximum Load: 77 lbs Work Stations 3. Load/Unload Station. PLEASE CONTACT US WITH ANY QUESTIONS YOU HAVE! Only Forms of Payment Accepted: Money Order Bank Checks Wire Transfer Business/Personal Checks*Payment for item and shipping costs must clear prior to shipping item. This item can be picked up in Plainville. CT 06062 or we can arrange for a freight quote. We will also ship with your preferred shipper. We will load the item free of charge. ALL SALES ARE"AS IS" AND FINAL. TRIPS INDUSTRIAL SURPLUS makes no representation of any item(s) sold to be fit for a
|
|
|
Manufacturer: SMC Model: SV1400-5FU. Supply Press: 0.2~0.7 MPa. This auction is for one Solenoid at a time the picture showing all the units is just to show condition. Shelf I.D. 15.
|
|
|
Used- Midwestern Screener. 24” Diameter, Model MR24S4-4, Stainless Steel. Single deck, 2 separation, no top cover. Driven by a 0.33 hp, 3/60/230/460 volt motor. Mounted on a carbon steel base. Serial#1205-2063. ref# 45105002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
This Creative Design and Machine Drum Lift/ Post Hoist with tablet press Control is in real good condition and guaranteed to functions 100% It came from a local lab that was upgrading equipment and we can accept pay pal or your credit card. Please contact me with any questions. Manufacturer, Creative Design, Year, 2003, Model, PH2601, Serial Number, 3890-1, Capacity Size, 300 LBS, Estimated Shipping Weight, 3.000, Length, 8 FT, Width, 2 FT, Height, 12 FT, Lifting Device, DRUM, Serial# 3890-1 Stainless steel construction 330 lb. capacity Was used with drums to load a Hata tablet press
|
|
Premier Bowl Feeder 300mm Bowl Size Speed Controller 110/240v 50/60Hz Anticlockwise Rotation I have some more bowl feeder both clockwise. Anticlockwise all 300mm and some linear feeders with speed controllers Shipping& Handling Policy 1. We can ONLY ship to: United Kingdom. United States, and Europe. If your country is not listed. Please confirm with us before you buy as additional rate and insurance may apply 2. Dispatch will be within three business day after payment is confirmed. Generally. Delivery time is 3-5 business days for the United Kingdom, 7-10 business days to USA and Europe 3. We will ship to your PayPal shipping address. All items will be dispatched from our warehouse in Harrogate. NorthYorkshire, England shipped via UPS and Royal Mail. Delivery queries please contact customer ... moreservice– call/txt 07932744161 or email 4. Multiple items will be combined into one shipment but please contact us for clarification on postage and handling costs Payment Policy 1. We accept Paypal. Bank transfer, Postal orders and cash 2. Payment to be made within 7 days. Please contact us if there is likely to be a delay Returns Policy 1. We are committed to give you the best customer service possible. If for any reason you are dissatisfied with a purchase. Please contact us and we'll assist you with a prompt solution. We'd like to settle any problem in a friendly manner. 2. We want to make sure you are happy with our item. Please contact us 4squareproduct@gmail.com if for any reason you have a query. A dispute or an item to return 3 Contact us from the delivery date with any initial queries or delivery issues 4. We will not be liable to customer for any damages beyond the amount of money that customer has actually paid us. Feedback and Contact 1.Questions or concerns- We will reply to messages within 2 business days. Emails. Which are received during the weekend, will be replied on Monday. 2. We thank you for your effort to make this sale and purchase experience a happy one! If you are happy with our item and se
|
|
|
Manufacturer: Gefran Sensori Model: 9628118. Shelf I.D. 10.
|
|
Click To Enlarge- USED- Tolhurst Perforated Basket Centrifuge. Model 12" Centerslung 12" x 5" 304 Stainless Steel Product Contact Areas. Top load/unload. Max bowl speed 1500-2900 RPM, 304 stainless steel basket rated 180 pounds per cubic foot. Tripod suspension, top cover with sight glass. Requires feed/rinse pipes. Driven by a 1 HP, 3/60/230/460 Volt, 3450 RPM XP motor. Mounted on a carbon steel frame with casters. ref# 86562. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment ... morecosts $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- GEI Galley Stackable Tote Bin. Approximately 20 Cubic Feet, Stainless Steel. 43-1/2" Wide x 28" long x 8" straight side x 36" coned bottom. Mounted on casters. ref# 86519. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and ... morewire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f809f311f-0xf0-
|
|
Click To Enlarge- USED- Alexanderwerk Chilsonator System. Model WP50N, Consisting of: 2) 6" diameter x 2" face water cooled grooved rolls, over/under design. Driven by a 1.5/2.2 KW(2/3 HP) 3/50/380 Volt, 1420/2840 RPM gearmotor with reducer. 1) 1-1/2" diameter x approximate 8" long horizontal screw feeder with hopper, driven by a.25 KW(33 HP) 3/50/220/380 Volt, 1370 RPM motor. 1) Lump breaker/rotary sifter, driven by a.75 KW(1 HP) 3/50/380 Volt, 910 RPM motor. 1) Control panel. Mounted on a carbon steel base with stainless steel legs. ref# 86458. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. ... moreIl. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f809f3386-0x100-
|
|
USED- Carbone Single Pass Shell and Tube Heat Exchanger. Model PYT10-31-6, 58 Square Feet, Horizontal. Carbon steel shell rated 100 PSI at 250 Degrees F. 31) 1-1/4" diameter x 72" long Graphilor tubes rated 100 PSI/FV at 365/250 Degrees F. Carbon steel heads. Mounted on saddles with legs. ref# 86414. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will ... morevary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- USED- Pfaudler Glass Lined Receiver Tank. 50 Gallon, 9115 Glass, Vertical. Approximately 24" diameter x 23" straight side. Dish bolt-on top, dish bottom. Internal rated 150 PSI/FV at 450 Degrees F. Openings: top(2) 2" 3" 4" 4" hand hole with sight glass cover; 2" center bottom outlet. Mounted on 3 carbon steel legs. ref# 86408. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location ... moreand type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- USED- Alloy Products Pressure Tank. 16 Gallon, 304 Stainless Steel, Vertical. 12" diameter x 30" straight side. Dish top and bottom. Internal rated 130 PSI at 100 Degrees F. Top openings: 4" x 3" oval with cover, 4) 1/2" NPT. Skirt mounted on a cart with casters. ref# 86339. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also ... morewill vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used-Unused- Reimelt Bin Vent Dust Collector. Model Jet Filter, Aluminum. Approximate 189 square feet filter area. Rated approximately 750-1100 CFMHousing measures 50" diameter x 48" straight side x 8" top, 304 stainless steel plenum. Requires(40) bags and cages. Side access door. ref# 86317. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each ... moreitem also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Oskar Krieger Vacuum Kettle. 145 gallon, model FMU 500, 316 stainless steel. Approximate 35" diameter x 36" deep. Dished clamp-on top, dish bottom. Internal rated-1/2 bar(7 psi) at 120 deg C(248 deg F) jacket rated 2.5 bar(36 psi) at 138 deg C(280 deg F) 2" diameter shaft with a 3 blade prop, driven by a 1.1/1.8 kw, 3/50/400 volt, 710/1450 rpm motor. Approximate 1" diameter bottom internal pipe coil. Top openings: 3/4" 4) 1-1/2" 1" 9" sightglass, 1-3/4" 6" 9" drive; 3" NPT center bottom outlet. Top cover hydraulically operated, driven by a 1.85 kw motor. Unit mounted on a common carbon steel base. Built 1974. ref# 86266. Item location: Bensenville. Illinois, United States. Services available: Freight- Check ... morethe item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- USED: Westfalia type LWA-205 Solid Bowl Disc Centrifuge. Bowl is 329 stainless steel. Speed of the bowl is 12.000 rpm. Separator design, base, bowl covers. Driven by a 3/4 hp, 1/60/115/230 volt, 1750 rpm varispeed motor. ref# 86264. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We ... moreaccept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Fitzpatrick Guilo-River. Model 6.6DX12L, 304 Stainless Steel. 2) 6" Diameter x 12" long rotors with pins. Gravity style feed throat, bottom discharge. Driven by an a 5hp, 3/60/230/460 volt, 1730 rpm gear motor. Mounted on a carbon steel frame with legs. ref# 86154. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please ... morecall for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Kason Centri-Sifter. Stainless Steel. Auger fed chamber, side access door, 6" top feed, 4" end overs outlet, missing fines outlet cover. Requires screen and blades assembly. Driven by a 5 HP, 3/60/230/460 Volt, 1750 RPM motor. ref# 86148. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates ... moreand payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Twin Tube Scrape Surface Heat Exchanger. 304 Stainless Steel. Approximate 6 square feet heat transfer surface, 2) 6" diameter x 24" long jacketed tubes. Plastic scraper blades. 3" tri clamp inlet/outlet. Each tube driven by an approximate 5 HP gearmotor. Includes control panel. Mounted on a carbon steel frame. ref# 86130. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight ... morecarrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Morehouse Cowles Vertical SandMill. Model 7015, Stainless Steel. Carbon steel jacketed chamber approximately 7" diameter x 15" long. 5.5 gallon batch capacity, 35-75 gallons per hour. 1" inlet, 2" outlet. Driven by a 15 HP, 3/60/230/460 Volt, 1760 RPM motor. Includes a Sandpiper air operated feed pump, model ST1-A. ref# 85672. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type ... moreof freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- U-Tube Heat Exchanger. 92 Square Feet, Horizontal. Carbon steel shell, 316 stainless steel head. 50) 5/8" diameter x 10' long 316 stainless steel tubes. 2" nozzles for shell, 2) 2" tri clamp nozzles for tubes. Saddle supports. ref# 85548. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping ... moreestimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f809f337c-0xf9-
|
|
Click To Enlarge- Used- Patterson Kelley Series 380 Packaged Unfired Steam To Steam Generator. 316L Stainless Steel. Approximately 42" diameter x 10' long. Rated shell/tubes 150 psi at 400 degrees F. ref# 85517. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX ... moreand wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
FULTON 20 HP BOILER GAS FIRED MODEL TCW-20 USED FOR HOT WATER HEATING PROCESS HOT WATER DOMESTIC HOT WATER GOOD WORKING UNIT TESTED NEEDS NOTHING SHIPS TODAY MIKE 216-374-7262
|
|
Used-Approximately 10.000 Gallon Used Oil Storage Tank, flat top, flat bottom, side entering manway. ref# 45122006. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying ... moreby credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Used- Proctor& Schwartz Gas Heated Variable Circulation Lab Tray Dryer. Model 062, 304 Stainless Steel. Approximate drying chamber 30-1/2” wide x 44-1/2” tall x 42-1/2” deep. Front hinged door with(2) windows. Includes(2) blowers, gas train, and a control panel with chart recorder. ref# 44231021 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Avins Fabricating Processor Kettle. 600 Gallon, 316L Stainless Steel, Vertical. 54” Diameter x 60” straight side, dished top, coned bottom. Dimple jacket rated 150 psi at-20 to 275 degrees F. Fixed stainless steel agitator mount. Bottom supported anchor agitator with scrapers, driven by a 5 hp, 3/60/230/460 volt, 1745 rpm gear motor, off center agitator with a 3 blade turbine, no drive. Top 18” man way with cover, 6” center bottom valve pad. Mounted on 4 stainless steel legs with frame. Built 2003. ref# 44231004 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Carr ViaFuge Pilot Seperation System. 316L Stainless steel/Titanium Ti-6AL-4V construction(product contact areas) Rotating speed up to 10.840 rpm, G” force range 500 to 20,000. Nominal flow rate 0.1-4 liters per minute, operating temperature 2 to 40 degrees C. 36 to 104 F. maximum internal case pressure 30 psi, bowl volume 1.3 liters, continuous flow design, 2 phase separation of solids and liquids. Belt drive configuration, 1 hp drive motor 230/460/3/60, control with inverter. Housing rated internal Full Vacuum/40 psi at-20 to 300 degrees F, jacket rated Full Vacuum/100 psi at-20 to 300 degrees F. Built 2001. ref# 44209002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Carr Powerfuge Pilot Seperation System. 316L Stainless steel/Titanium Ti-6AL-4V construction(product contact areas) Rotating speed up to 15.325 rpm, G” force range 500 to 20,000. Nominal flow rate 0.5-1 liters per minute, operating temperature 2 to 40 degrees C. 36 to 104 F. maximum internal case pressure 30 psi, bowl volume 1.1 liters, continuous flow design, 2 phase separation of solids and liquids. Belt drive configuration, 1 hp drive motor 230/460/3/60, control with inverter. Housing rated internal Full Vacuum/40 psi at-20 to 300 degrees F, jacket rated Full Vacuum/100 psi at-20 to 300 degrees F. Built 2000. ref# 44209001 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- Bird HB1400 Solid Bowl Decanter Centrifuge. 316 Stainless Steel. Maximum bowl speed 3100 rpm. 10 deg contour bowl, ceramic lined cake discharge ports, vibration isolators, Eddy current backdrive 15 hp, 230/460 volt. Drive motor is 30 hp, 3/60/230/460 volts. ref# 44205 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
Click To Enlarge- Used- B&G Stackable Tote Bin. 45 Cubic Feet, Sanitary Stainless Steel. 52" Long x 52" wide x 18" straight side x 36" cone bottom. 16" Top center opening, no cover. 10" diameter center bottom outlet, no valve. ref# 85126. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates ... moreand payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Used- B&G Tote Bin. 16 Cubic Feet, Sanitary Stainless Steel. 40" x 40" x 8" straight side with 24' cone bottom. Stackable, with 6" diameter bottom outlet. ref# 85124. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please ... moreadvise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Used- GEI Tote Bin. 14 Cubic Feet, Sanitary Stainless Steel. 40" x 40" x 12' Straight side with 12' cone bottom. Stackable with 6" diameter bottom outlet. ref# 85118. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise ... morefor other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- AAF Pulse Pak II Cartridge Type Pulse Jet Dust Collector. Model 4-2H, 1700 Square Feet Filter Area, Carbon Steel. Housing measures 30" x 60" x 75" straight side x 36" coned bottom. Side access door, 4) 2' wide x 4' long x 7" thick cartridges. 16" center bottom outlet. 8" air inlet, 11" x 21" air outlet. Mounted on 4 carbon steel legs. Includes a Veearc Super 7000 control panel. ref# 85096. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. ... moreBase shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13fbf26b350-0xfe-
|
|
Click To Enlarge- Used- Tolhurst 24" x 10" Perforated Basket Centrifuge. Kynar lined product contact areas. Top load/unload. Approximate max bowl speed 1200 RPM. Tripod suspension, top cover with sightglass. Driven by an approximate 5 HP XP motor. ref# 85088. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and ... morepayment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Ametek Centerslung 12" x 5" Perforated Basket Centrifuge. Model 84. Kynar lined product contact areas, top load/unload. Max bowl speed 1500-2900 RPM, basket rated 180 pounds per cubic foot. Tripod suspension, top cover with sightglass. Driven by a 1 HP, 3/60/208-230/460 Volt, 3450 RPM XP motor. Mounted on a base with casters. ref# 85087. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type ... moreof freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Feldmeier Kettle. 125 Gallon, 316 Stainless Steel. 31-1/2" diameter x 35" straight side. Flat top with bifold cover, 2" slope bottom with a 1" National Pipe Thread side bottom outlet. Jacket rated for 125 PSI@ 200 Degrees F. Mounted on casters. ref# 85015. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please ... morecall for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Lee Metal Products Tri-Mix Turbo-Shear Kettle. 25 Gallon, Model 25D12T, 304 Stainless Steel, Vertical. 23" Diameter x 19" deep. Jacketed hemispherical bottom rated 125 psi at 353 degrees F. Stainless steel tilt back air operated agitator bridge with a dual motion 316 stainless steel agitator, sweep anchor style with scrapers and an inner bar, driven by a 3/4hp, 3/60/230/460 Volt, 1745 ropm XP gear motor. 1) Center turbo-shear mixer, driven by a 1-1/2hp, 3/60/230/460 volt, 3450 rpm XP motor. 2) 1/2 Covers. 1-1/2" Center bottom outlet. Mounted on a stainless steel frame with casters. ref# 84974. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United ... moreStates. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Beside the Homogenizer equipment.We sell 3 back up pump that it includes.This system was working until we took out from the whole Homogenizer system,now we sell it As is. if you have further Info regarding this equipment please call me at 310-598-3407 thanks Posted with
|
|
Click To Enlarge- Used- Yula Corporation Single Pass Shell& Tube Heat Exchanger. 19 Square Feet, Vertical. Model WC-1A-42AAS. 316L Stainless steel shell rated 120 psi at 350 degrees F. 42) 1/2" Diameter x 42" long 316L stainless steel tubes rated Full Vacuum& 150 psi at 350 degrees F. 316L Stainless steel tube sheet, 1) 316L stainless steel head, 1) missing. Opening for tubes 4" openings for shell(2) 1" Mounts on(1) side lugs. National Board# 8866, serial# 14399, built 1992. ref# 44888004 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller ... morefor details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
PLEASE EMAIL ME WITH ANY QUESTIONS ABOUT FITMENT. MUST MATCH PART#S. HAPPY EBAYING AND HAVE A GREAT DAY! NO RETURNS ON ELECTRICAL PARTS
|
|
|
Inventory# FP2074 Manufacturer: JWI Model# 630G-32-4 Cu.Ft. 4.25 Number Plates: 15 Plate Size(mm) 630 Gasketed/NonGasketed: Gasketed Style: Air Over Hydraulic OAD: 96"L x 42"W x 62"H Max Filtration: 100 psi Max Hydraulic: 4300 Plate Shifter: No Description: Used Filter Press For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
Click To Enlarge- Used- Par Piping& Fabrication Tank. 600 Gallon, 321 Stainless Steel, Vertical. 48" Diameter x 72" straight side, dished top and bottom. Openings top 3" 8" side 2" 3" 1" Center bottom outlet. Mounted on 4 carbon steel legs. Serial#TK3201. Built 2004. ref# 44801039 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. ... moreBase shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fcebb2913-0xfc-
|
|
Click To Enlarge- Used- Hoffman"Hoffco-Pulse" Stationary Vacuum Cleaning System consisting of: Dust Collector. Model A601040, s/n C000177, with Hoffman Centrifugal Blower, Model 38301A1, s/n M002180, with 15 hp motor. ref# 45102034 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment ... morelocation and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13fd8c18275-0x104-
|
|
Click To Enlarge- Used- Apache Stainless. Tank, 1,500 Gallon, Stainless Steel, Vertical. Approximate 66" diameter x 120" straight side, coned top, sloped bottom. Openings top(3) 2" 20" man way with cover. Side 24" man way with davit arm cover, 4-1/2" side bottom outlet. Includes a side mounted carbon steelk ladder with top safety railing. Serial# 3136. ref# 45102032 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless ... moreotherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Click To Enlarge- Used- Metalfab Volumetric Feeder. Approximately 2" diameter screw with tube. Top mounted hopper with vibrator motor. Driven by a 3/4hp, 90 volt, 1750 rpm DC gear motor. Mounted on a frame. Serial#48949. ref# 45102029 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location ... moreand type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
TMC Optical Table 4' x 6' x 12" 25" 20 Sealed Holes on 1" Grid Includes: TMC Micro-g Adjustable Height Rigid Legs with Tie Bar Kit Very Good Quality& Condition Payment and Shipping Terms: Buyer must make contact within 24 hours of auction end to arrange payment and shipping. Payment must be received within 4 days of auction closing. Buyer pays actual shipping or buyer may arrange pick up/ shipping ~ forklift on site(we do not charge loading or handling fees) Accepted Forms of Payment: COMPANY CHECK. CASHIERS CHECK, MASTERCARD, VISA, BANK WIRE TRANSFER*Items Subject to Walk In Sale*
|
|
Click To Enlarge- Used- Westafalia SAMR 5036 Desludger Disc Centrifuge. 329 Stainless steel construction(product contact areas) Maximum bowl speed 6500 rpm. Clarifier design(liquid/solids separation) centripetal pump liquid discharge, direct drive configuration, 20 hp drive motor(208-220/440/3/60) Mounted on a stainless steel base with control panel. ref# 44130004 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items ... moreoffered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-140100b8d82-0xf3-
|
|
Excellent Condition MAC AIR PUMP PACKAGE 3-1/2" LINE MODEL 510PKG WITH GARDENER DENVER PUMP MODEL 5MP NEW IN 2006 Why pay new price? Buy a great used machine instead. Your plant is running on used equipment right now. So why pay new price to replace it or add on? Ask if your current equipment company goes the extra mile for you to ensure quality for years to come. This model also has a 20 HP motor and is in EXCELLENT condition. MAC AIR PUMP PACKAGE 3-1/2" LINE MODEL 510PKG WITH GARDENER DENVER PUMP MODEL 5MP NEW IN 2006 You're getting a top quality mill at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What ... moremakes our equipment better than the rest? Our rebuild includes taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings Test run equipment We include the components many others leave out(such as feeders, conditioners. And motors) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1401afab4c3-0xff-
|
|
|