|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Micro Soil Disintegrator Crusher Mill Plant Grinding Machine Pulverizer 1400RPM. Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine110V 1400r/m TOP. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat.
Buy It Now
Free Shipping
Condition: Used Location: New Berlin, United States
Runs on 460 volt 3 phase Delta. It was in a clean room, I guess that's why I didn't have to clean it. High quality German made machine. Has real strong suction. There are two suction ports on the machine, one on each side so hookup is convienent.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
130 Watts 120 Volts.
Buy It Now
Free Shipping
Condition: New Location: , United States
Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids Free Shipping
Condition: New Location: Powhatan, United States
Nature of the item. We are more than happy to help you try to resolve any issues you have. This will avoid us opening an unpaid item case.
0 bids Free Shipping
Condition: New – Open box Location: Tuckerton, United States
CATALOG #: M241341 DM. NEW HOSOKAWA MICRON.
0 bids $9.00 Shipping
Condition: New Location: Minneapolis, United States
NEW CAPITAL ENGINEERING CEMCO 20-MB-125 FILTER 100 Mesh Sale is for one, 2 are available at time of listing
Buy It Now
Free Shipping
Condition: New Location: Joshua, United States
New sprocket. Never used.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
P/N: SH1689.
0 bids $65.00 Shipping
Condition: For parts or not working Location: Chino Valley, United States
Used part. Turns freely. Has wear from use and age. Needs to be cleaned up and rebuilt. Only the hardware pictured is included.
0 bids Free Shipping
Condition: Seller refurbished Location: Millersburg, United States
Part Number BE08569. Dump Hoppers. Lift Tables. Local Pickup. Information and Support. Warehouse Storage Location : BM-06-03. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids Free Shipping
Condition: Used Location: Pawtucket, United States
We’re conveniently located on the East Coast between Boston and New York. 22 piece Hardinge 5C collet set. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design.
0 bids Free Shipping
Condition: Used Location: Minneapolis, United States
Make: U.S. Stoneware. Type: Jar Roller. We want you to feel comfortable buying from us. This is your chance to save if you can use it! 1.5 HP, 208V, 1 Phase. (4) 72" Rollers.
Buy It Now
Free Shipping
Condition: New Location: Butner, United States
PRM #1 SIZE LIQUID FILTER BAGS - POLYESTER FELT WITH POLYPROPYLENE RINGS - 200 MICRON LOT OF 25 PCS. Materials: Polyester Felt Bag, Polypropylene Ring. Polypropylene Ring with Handles are standard. Available in Quantities of 10 or 25 Bags or cases of 50 bags.
0 bids Free Shipping
Condition: For parts or not working Location: El Paso, United States
80.0000 x44.0000 x25.0000. Overall dims 71x36x19.
0 bids Free Shipping
Condition: New – Open box Location: Scottsburg, United States
Oil CART, FILTER FP1-75L4 QBOOLUTE #703F63FML.
0 bids Free Shipping
Condition: Used Location: Brookpark, United States
We can provide freight quotes. we can either use your account number or provide a rate quote.
0 bids Free Shipping
Condition: New – Open box Location: Phoenix, United States
Parker Filtration Model: 926476 Filter. Schroeder Model: K10. Unused Spare. Local Pick up is acceptable.
0 bids Free Shipping
Condition: Used Location: Needville, United States
Experience the cutting-edge piFLOW®p SMART, a self-contained vacuum system infused with machine learning software and advanced algorithms. This powerhouse is purpose-built to optimize material conveying, ensuring you reach the maximum capacity effortlessly.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 10" of Teflon Leads and has a built in Type K Thermocouple. 100 Watts and 48 Volts.
0 bids Free Shipping
Condition: New Location: Baroda, United States
If you are not able to pick up locally, we are able to get competitive freight quotes as well.
0 bids Free Shipping
Condition: Used Location: Mountain Home, United States
In used condition with marks and wear consistent with normal use. Location: B4.
0 bids $13.99 Shipping
Condition: New – Open box Location: Cedar Hill, United States
This item is to be installed and maintained by qualified individuals. We claim no expertise in the use of this item.
0 bids Free Shipping
Condition: New Location: Allentown, United States
This GLASFLOSS MAGNA 900 SERIES FILTER is a top-of-the-line choice for those in the market for a high-quality filter. With a 95% ASHRAE rating, it is sure to provide clean and efficient air filtration. The box frame design ensures easy installation and long-lasting durability. Additionally, this filter features the trusted GLASFLOSS brand, known for producing top-quality filtration products. Whether you're in the business and industrial sector or working in process engineering equipment, this filter is a great choice for keeping your workspace clean and healthy.
0 bids Free Shipping
Condition: New – Open box Location: Cambridge, United States
THIS IS AN UN-USED NEWPORT UMR8.25 LINEAR POSITIONER (TAPPER. 25/20 AND 8.32) WITH A UN- USED PMA MOTOR MIC. THIS ITEM IS SUBJECT TO WALK IN SALE .
0 bids Free Shipping
Condition: Used Location: North Bend, United States
It's easy to install and use, and is compatible with a wide range of CNC machines.
Buy It Now
Free Shipping
Condition: Used Location: Middlebury, United States
Model: 7FOS3. Size: Length: 48 in. Width: 21 in. Height: 18 in. Prefer to pick it up yourself?. LOCAL PICK-UP. Weight (lbs, oz): 73. Will there be a dock or forklift.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 12" of Stainless Steel Braided Leads. 100 Watts and 240 Volts. P/N: CH022330.
0 bids Free Shipping
Condition: New – Open box Location: Rochester, United States
The unit appears to be new and unused by the previous owner. Overall the unit appears to be in excellent, new, ready to use condition.
0 bids Free Shipping
Condition: New – Open box Location: New Paris, United States
Doing the right thing matters to us! ● Handled with care quickly! Local pick-up is always an option. Save money without sacrificing genuine quality! WE RESPOND FAST!
Buy It Now
Free Shipping
Condition: New Location: Addison, United States
This is a geniune OEM part from Omni Pure. Use genuine OEM parts for safety reliability and performance.
0 bids Free Shipping
Condition: Used Location: Willoughby, United States
Ask for Bob Wells.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11778. Disposable - 1 use bags. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion. Clear bag allows you to see how much room you have left.
0 bids Free Shipping
Condition: New Location: El Monte, United States
Buy It Now
Free Shipping
Condition: Used Location: Bishopville, United States
Salina Vortex Stainless DA2.5-2SSY-SI.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 24" of Fiberglass Leads. 100 Watts and 120 Volts. P/N: CH025727.
0 bids Free Shipping
Condition: Used Location: Brookpark, United States
We can provide freight quotes. we can either use your account number or provide a rate quote.
Buy It Now
Free Shipping
Condition: New Location: Sterling Heights, United States
1k Aerosol Spot Blender USC-3680093. Ideal for spot and small repairs. Dries to a matte finish; polishing required.
Buy It Now
Free Shipping
Condition: New Location: Butner, United States
0.5 MICRON POLYESTER FELT #4 SIZE LIQUID FILTER BAGS FOR FILTER HOUSINGS. Materials: Polyester Felt Bag, 304 Stainless Steel Ring. # 4 Size Filter Bags. Sewn seam using 5 line system.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Has a 120V coil. Lift Tables. Mounting base is 10x2". Model 6-42-110. Information and Support. Part Number 006-042-0110. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
0 bids $26.00 Shipping
Condition: For parts or not working Location: Schwenksville, United States
0 bids Free Shipping
Condition: New – Open box Location: Brevard, United States
3 3/8" Eastern C Clamp For Mixer. Casting # 311417 M.
0 bids $5.55 Shipping
Condition: For parts or not working Location: Rancho Cordova, United States
We are unable to test and due to these issues, we are offering this unit for sale AS-IS, primarily for parts or repair, as it is non-operational and may be incomplete. We have not conducted any further testing or inspections, which means there may be additional, undiscovered issues with the item. Please refer to all item photos to assess the unit's condition. Pictures are of one of the actual units available. The unit is in our possession and ready for immediate shipping. If you have any questions or need additional information, please don't hesitate to contact us..
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Pallet Racking. Wire channel on the outside. Lift Tables. Adjustable knob. Mounted on a 24" tall (adjustable height) stand. Stainless construction. Outfeed is at 42". This is the about lowest point.
0 bids Free Shipping
Condition: New Location: Spokane, United States
Buy It Now
$18.00 Shipping
Condition: New Location: , China
Automatic Spring Separator. 1 x Automatic Spring Separator. (This item is 220V, if you need 110V, pls let's know). Adjust the exit gate of spring. Entangled in small spring the best weapon! This machine will be intertwined for a small spiral spring linear manner one by one through the centrifugal separation of vibration.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Cantilever Racking. Filtration Group EZ-112-E-150-2P #2 Bag Filter Stainless Basket Strainer 2" NPT Filtration Group. Lift Tables. For #2 bag filter. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids Free Shipping
Condition: New – Open box Location: Warrensburg, United States
NEW IN BOX. CONDITION: NEW SURPLUS. You are only buying the item(s) pictured/described.
Buy It Now
Free Shipping
Condition: Used Location: Millwood, United States
25HP v-belt drive (460V, 60Hz, 3ph.). 16" X 24" extended height inlet hopper with safety perforated plate. Previously used for gelatine powder. ITEM #: 20191. Stator Knife Rows: Qty.
0 bids Free Shipping
Condition: New Location: Knoxville, United States
With our dynamic pricing model, our prices are always competitive.
0 bids Free Shipping
Condition: Used Location: Baroda, United States
If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
Free Shipping
Condition: Used Location: Millwood, United States
All prices are FOB Millwood WV unless otherwise noted.
0 bids Free Shipping
Condition: New – Open box Location: Halls, United States
SPX LIGHTNIN MODEL 11 ELECTRIC MIXER. With / MOUNTS, SHAFT & BLADE! MODEL # - 11. NEW / NOT IN BOX!
Buy It Now
$24.99 Shipping
Condition: Used Location: Framingham, United States
0 bids $155.00 Shipping
Condition: Used Location: New Paris, United States
Lightnin Mixer Mod. ND-4 1.5HP 230/460V 1730RPM GE Electric MotorModel#: 5K184TGE238 Motor spins freelyThis mixer is covered with our 30 day after date of install ~ Warranty!!Location: MP3This will ship be a freight carrier. Please contact us for shipping details, or any other questions you may have.Flat rate freight price is to a business location.Make allowance for each other’s faults, and forgive anyone who offends you. Remember, the Lord forgave you, so you must forgive others.Colossians 3:13
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 48" of Stainless Steel Braided Leads. P/N: F4 4NW.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Removed From An Ingersoll-Rand 75HP Air Compressor Model SSR-EP75 Serial No. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Bottom of booth has 2 troughs for either suction if used for draft booth, or updraft if used in a hot air drying operation. This is a basic unit, that has potential in either heating, drying, curing, or dust removal, debris, vacuum, etc.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
$41.99 Shipping
Condition: New Location: , China
3.0 Automatic Screw Conveyor is suitable for. Screw head size 4.8-5.4.
|
|
|
This no reserve auction features an awesome vintage industrial foundry mold for a screw conveyor. This item is beautifully handcrafted out of mahogany wood. This precision woodworking piece was made in the 1930-40s and used to make sand casts. The casts were then filled with molten metal to form the metal parts needed for the machines. The mold patterns make beautiful home accents and wall décor or they could be used as they were originally intended- to make molds. The wood grain has been enhanced over the years. And the craftsmanship is amazing. The molds are in original condition. In order to maintain their authenticity. And aged patina they have not been sanded, modified, or restored. The woodgrain on this piece is awesome and with a little elbow grease they could really shine. Height: ... more8 1/2" Width: 12" across screw) This item is being sold in vintage AS IS condition. No returns. Thanks! Posted with
|
|
|
This 6.5 x 14 DW Collector's Series Stainless Steel snare drum was purchased brand new about 9 months ago. It is in like new condition(except for the batter head) and is pretty versatile. This drum features the DW exclusive magnetic(MAG) throw off and their three position butt plate. The drum also features triple flanged hoops and ten lugs. Everything is stock except for the batter head. Check out the demo:
|
|
This auction is a 5 day auction for an in very nice condition Car Bottom Furnace that can load up to 50 tons with a load area of zone 6’6” Wide x 14’5” Deep x 7’7” and a maximum operating temperature of 2100F. This furnace was formally used by a heat treating company that was forced to move because the rapid transit system for Portland was routed through their property. The system was just rebuilt 3 years ago and has had little use since the rebuild. The system is in very nice shape. The system has a car bottom with guillotine door so you can open the door drive the car bottom out of the furnace and close the door while you are reloading the car bottom. The system runs smoothly and heats up quickly with no issues. You can also just use this furnace without the car bottom since the guillotime ... moredoor closes to the bottom of the furnace(in this configuration the installed size is much smaller) Here are some specs. Manufacturer/Maintained By- WESTERN INDUSTRIAL CERAMICS INC. The car bottom furnace has a maximum working temperature of 2100F· Car bottom work zone 6’6” Wide x 14’5” Deep x 7’7” tall. Installed space needed– 12’wide. 35’ long with car bottom out, 13’ tall except were the door is which needs to be 20’ tall. If you do not use the car bottom the furnace installed size is only 12'x16'7"x13'tall. It has two 5HP recirculating fans in the top. The fan speed is controlled. Heats(fully loaded in 45 minutes at max current 600A) Heats 1 hr at 400A Current. This is a NO EMISSIONS furnace so since it is an economical electric furnace(note following operating costs) This system can be installed without the cost or lengthy emissions approvals. The furnace does not have NOX or other emissions associated with natural gas furnaces. So you can install it without a permit application. Power Usage and Operating costs 600 A- Max Current 498.24 KW- Max Power 400 A- Normal Heat up Current Loaded furnace with 1 hr heat up 332.16 KW- Normal Operating Power Heat Up 60 A- Normal sustaining current 49.824 K
|
|
Untitled Document Welcome to EstateAuctionsInc! We are one of the Top Sellers of Antiques. Collectibles and Quirky items on eBay. We have been selling since 1998 and ALL of our auctions start at.99 cents. We are proud to announce that we maintain a"FIVE STAR Detailed Seller Rating" and our staff strives for 100% customer satisfaction. Our 100% feedback rating will vouch for that. We work with consigners from Coast-To-Coast and work hard to make sure we have top quality items. We are"Your Quality Zone" search"YQZ" to see our other listings our_ UP IN THIS AUCTION Set 5 U.S. Standard Sieve Series Harry Dietert Co Brass 70/100/140/200/270 Shabby Chic Condition 8" Across Please be patient there are 10 photos to be loaded in this auction. Up in this auction is ... morea set of 5 U.S. Standard Sieve Series by the Harry W. Dietert Company. No. 70. 100, 140, 200, 270. The best we can tell these were used for determining the consistency of sand granules for castings. Each is 8" across the pan, one has two tears in the screen. We found this online on their website, yes they are still in business: The Dietert Company founded by Harry W. Dietert in 1922 is now part of DIETERT Foundry Testing Equipment Inc. Throughout the years. Dietert Laboratory instruments have been used worldwide in controlling sand quality for the production of high quality castings. The name Dietert is known throughout the world for innovative. Reliable, and durable products. Many Dietert instruments are still working after more than 50 years, continuing to provide accurate measurement of variables that must be controlled to produce castings of high quality. Estimated shipping weight. packaged) is 5 lbs 8 oz in a 14 x 14 x 12 box. The eBay Calculator is not always right- if the shipping looks too high email us and we will give you an accurate quote prior to the auction ending. What a great find! FACTS ABOUT ESTATEAUCTIONSINC(Norb& Marie Novocin) ONE OF EBAY'S TOP
|
|
BULK EQUIPMENT SYSTEMS VIBRATORY MOTOR MODEL: BE-220-2B VOLTS: 230/ 460 3 PHASE RPM: 3355/ 3470 NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEMS HAVE NICKS AND SCRATCHES. THESE DO NOT AFFECT USABILITY. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEMS HAVE NICKS AND SCRATCHES. THESE DO NOT AFFECT USABILITY. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller ... moreis unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL,
|
|
1500 KILO CAP ALL STAINLESS STEEL CONSTRUCTION FOOD GRADE HOLDING TANK SILO Click Images to Enlarge ALL STAINLESS STEEL CONSTRUCTION HOLDING TANK 1500 KILO CAPACITY FOOD GRADE CONE BOTTOM APPROXIMATE MEASUREMENTS: 4' SQUARE x 6' TALL MORE INFORMATION COMING SOON! APPROXIMATE WEIGHT: 660 LBS LOADING FEE: $20 NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend ... morepick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could be credit card or any other alternative means. Copyright 2004. 1MachinerySales.com. All rights reserved. a pretty image. with Vendio Research. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! On
|
|
GRACO LOW SHEAR AGITATOR WITH GEAR REDUCER Search GRACO LOW SHEAR AGITATOR WITH GEAR REDUCER. USED Agitator: Manufacturer: Graco Model number: LSA-117 Assembly number: 962026 Drive number: 915907 Shaft number: 616962 Impeller number: 515196 Motor number: 515200 PDF Gear Reducer: Manufacturer: Sumitomo Model number: VC 3085 Ratio: 15:2 Input: 54 Hp Output torque: 269 PDF Guaranteed not D.O.A. This item will ship via freight shipping because of it's size. Due to our large volume of freight we no longer allow customers to arrange their shipments. Unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you! C8. NT 50 lbs 112612 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no ... morerefunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in t
|
|
07 3008 7975 T116 This item is surplus stock in very good condition. Listed as used as we are unsure. Please email any questions or requests for additional pictures before purchasing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. 5=2.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13df76fb1d0-0x103-
|
|
|
Stainless Steel Tank- 500 Gallon- Cherry-Burrell- Buyer Pick-up shipping. Or I can Skid for LTL Pick-up(USA ONLY) 49080 Michigan
|
|
|
THIS IS A SDL 20 FIBER LASER WITH KEY. TESTED. 10W. 29A. DUE TO THE SENSITIVE NATURE OF THIS SORT OF ITEM AND THE LEVEL OF KNOWLEDGE REQUIRED TO OPERATE IT PROPERLY IT IS BEING SOLD AS-IS WITHOUT THE OPTION OF REFUND. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED VIA FEDEX GROUND SERVICES(UNLESS BUYER REQUESTS OTHERWISE) IN A(QUALITY) PADDED WOODEN BOX. BUYER PAYS ACTUAL SHIPPING COSTS. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
This is a large used funnel in good condition. It is 36 inches tall overall. The inside at the top is 18 inches across and 19.5 inches deep. The outlet tube is 3 inches in diameter. It is made of heavy stainless steel. This is shown on a stand. The stand is not included in this sale. We can included it but it is to big to ship UPS and it's pretty flimsy anyway. If we included the stand it will have to ship truck freight. Shipping weight is calculated without the stand. See the item photos above for the actual contents of the auction and the exact condition of the item elements. You will receive the actual items in the photo. Click on the"Red Door" Icon and visit our ebay store for more great deals! We make every attempt to describe auction item correctly and provide pictures ... morefor your review. If you have any questions. Please email us before you bid. We are using the eBay shipping calculator to offer a fair shipping cost to this item. To make sure you are getting an accurate quote via the eBay shipping calculator. Make sure your zip code is the default zip code when calculating the shipping cost for this item. If you wish to make additional purchases for which you would like to request combined shipping, just email us! We welcome international trade. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. All international buyers are responsible for any additional shipping and handling charges, crating costs, and any other costs arising from cross-border trade with us. For your security. We reserve the r
|
|
UP FOR SALE IS A VINTAGE ELECTRIC LAB OVEN. THE ITEM IS USED BUT IS IN GOOD CONDITION CONSIDERING ITS LIKELY 50 YEARS OLD. THE ITEM HAS NOT BEEN TESTED BUT IT SEEMS ALL THE PARTS ARE THERE. IT JUST NEEDS A POWER SUPPLY. THE FRAME IS STAINLESS STEEL, WITH SOME STEEL PARTS THAT BEAR SOME RUST, THE WALLS ARE ASBESTOS AND ONE SIDE HAS A DENT IN IT(SEE PICS) WHICH COULD BE REPAIRED WITH SOME SPACKLE. THE DOOR LATCHES FIRMLY SHUT AND THERE IS AN INDICATOR LIGHT ON THE FRONT, UP TOP ARE SOME VENT HOLES WITH A CONTROL KNOB(WHICH IS SLIGHTLY CRACKING) BOTTOM HAS SOME REGULATABLE VENTS AND A CONNECTOR AND OTHER COMPONENT. THE BADGE READS"THE CHEMICAL RUBBER CO. AND ANOTHER READS: 110VAC, 6A, 660WATTS" WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT ... moreTHIS ITEM. I SHIP OUT ITEMS TWICE A WEEK! NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ALASKA. HAWAII. CANADA. PUERTO RICO, OR ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. S837
|
|
|
USED TURNS SMOOTH SM- CYCLO SEE PICS APPROX SHIPPING WEIGHT: 62 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. AJ. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ lt LAZERVAC PULSE JET DUST COLLECTOR The perfect self cleaning dust collector for a plasma or Laser cnc. Powered by an energy efficient 3hp 230/460V Leeson motor this dust collector has a CFM rating of 1500 CFM. Pulse jets guarantee clean filter. Easily removable dust bin at bottom of machine. Currently wired 460V. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of coverage 3. Please call(630-229-6705) or email( info@360degreemachinery.com) ... moreus for full freight options. There will be $100 custom skidding/crating fee if shipping common carrier. 4. Illinois transactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10.000 to protect against freight loss/damage
|
|
|
Used 250 gal stainless water jacket processor hot or cold water 48" dia X 37" side wall split hinge covers one side missing with 2 blade agitator gear motor 120 volt motor mounted on 17" legs overall 75" high This item is listed from other sources. Please contact the seller for confirmation of sale. The seller will load this item on a flatbed truck at no charge. If the buyer requires any preparation for shipping. Skidding, etc, there would be an additional charge. We encourage inspection prior to purchase.
|
|
2-13/16" ALUMINUM DRIVE FLAT BELT PULLEY- 3/4" WIDE WITH A 1/2" CENTER UP FOR YOUR CONSIDERATION IS THIS SMALL ALUMINUM DRIVE PULLEY. THIS PULLEY IS USED WITH FLAT BELTS; AND IS 2 13/16" 2.83” O.D. 3/4” WIDE(78" IN THE BELT SURFACE AREA. THIS PULLEY WILL FIT ON A 1/2” SHAFT AND HELD IN PLACE WITH A SET SCREW. YOU WILL NOT BE DISAPPOINTED WITH YOUR PURCHASE. PLEASE EMAIL ME FOR OTHER PAYMENT OPTIONS OR ANY QUESTIONS YOU MIGHT HAVE AND I WILL RESPOND ASAP. REMEMBER. BID WITH CONFIDENCE. IF YOUR NOT HAPPY WITH ANY TRANSACTION, THEN I’M NOT HAPPY EITHER. I WANT EVERY AUCTION TO BE AN ENJOYABLE EXPERIENCE FOR BOTH OF US. Winning bidder must notify me within 3 days of auction end. Payment must be received within 8 days of auction end or eBay will be notified of non paying ... morebidder. PLEASE LEAVE A POSITIVE FEEDBACK. AS I WILL DO THE SAME FOR YOU. I accept PayPal. Please email me for other payment options. The winner should contact me within 3 days of the end of the auction. Returns accepted within 7 days of receiving. Good luck with your bidding. Thank you. All items will ship the next business day unless otherwise stated within the auction. BY BIDDING YOU AGREE THAT SELLER ASSUMES NO RESPONSIBILITY WHAT SO EVER FOR ANY LOSS OR DAMAGE TO UNINSURED ITEMS OR ITEMS LOST IN THE MAIL. THANK YOU. IF YOUR NOT SATISFIED. I WILL REFUND 100% OF YOUR PURCHASE PRICE, LESS SHIPPING. IF YOUR NOT SATISFIED, PLEASE CONTACT ME SO I CAN MAKE IT RIGHT. ITEM MUST BE IN SAME CONDITION WHEN RETURNED. PLEASE USE THE EBAY MESSAGE SYSTEM
|
|
Item: 5 Gallon pressure tank. Material: Stainless Steel 316L. Dimensions: O/A H = 24" Dia. = 9 1/2" Tank H = 18" Dia = 9" Manufacturer. Alloy Products Corp. Pressures: Cert by APC rated for 100PSI@ 20 to 100 F MWP Inlet: 1) 2 1/2" OD- 1 7/8" ID Tri-Clover type top inlet. No bottom outlet! Condition: Used. Weight: 20 lbs. Auction is for one item. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of ... moreour items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. EXCELLENT!
|
|
|
THIS IS A(LIKELY. USED) UN-TESTED GSANGER(LM8-GT) POCKELS CELL. THE LENSES APPEAR TO BE IN GOOD SHAPE WITH NO PRINTS OR SCRATCHES. ASIDE FROM THAT, I HAVE NO INFORMATION REGARDING THIS ITEM. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA INSURED FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINSESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE BANK TO BANK WIRE TRANSFER ONLY. THIS ITEM IS SUBJECT TO WALK IN SALE*
|
|
BT# 7356 FEMAPOSA-100.1Z You are looking for: 100 TON HYDRAULIC DEEP DRAWING PRESS TONG MYUNG YEAR 1996 USED ITEM. FROM WORKING ENVIRONMENT, SHIPPING FREIGHT TO BE CALCULATED Manufactured by: TONG MYUNG. Additional info: 100 TON HYDRAULIC DEEP DRAWING PRESS TONG MYUNG Press Machine Code: 11-01-08-01 Rated Voltage: AC 380V 3PH 60 Hz MFG Date: 1996.11. Was running when plant shut down. All maintenance is OK, no crack, sold as is. Main Motor: 22 Kw 30 Hp Rating: 380 V. 60 Hz, 1180 RPM TEFC. FRAME 200L Mask Forming Die Panel Code: MA-11-01-12-01(1) Model Name: 20" CPT MNN Weight(Ton) 1.1 Ton(645x860x450) MFG Date: 2000.11. Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Please contact us before you bid or buy: Visit our eBay ... morestore: our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
X-Y-T MEASURING MICROSCOPE STAGE. HEAVY DUTY CROSS ROLLER BEARINGS, WITH MICROMETERS. QUESTIONS 408-779-4240 TERRY
|
|
|
1.5" SF STAINLESS STEEL BLACKMER PUMP. NORD GEAR REDUCER, 1 HP WEG HAZARDOUS MOTOR. 15 gpm, 1 phase 1750rpm.115v/230/460 new $8500
|
|
USED. PORTS: 1/2" MOTOR INFO. 184TC FRAME. 208-230/460 VOLTS, 1750 RPM, 3 PH. 60 HZ. RELIANCE REDUCER RATIO 17.1:1. SEE PICS APPROX SHIPPING WEIGHT: 382 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES.TAXES, AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING OR BUYING. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURN ITEMS PLEASE CONTACT SELLER FOR SHIPPING QUOTE ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. PB. Powered by The free listing tool. List your items fast and easy and manage ... moreyour active items.
|
|
|
18' Long x 12" Wide SS Conveyor Incline.Z Style, cleated food grade belt'cleated' food grade belting Stainless frame construction 4" SS sides Z Style conveyor incline 12" wide belt(cleated) food grade Conveyor is 18' in Length 12" Infeed elevation(adjustable) 28" discharge elevation(adjustable) 12" cleat centers 1" high cleats Discharge is 2' Long Infeed is 10' Long Incline is 6' Long SS legs Just removed from a Major Food Plant! Excellent Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
Used 750 Gal. Stainless Tank. 5' Dia. x 5' Straight Side, Flat Lift Off Top And Cone Bottom With 2" Nozzle.Tank Has 1/4 h.p. Chemineer Mixer, Model PG-2, 430 RPM, Bronco DC LTU-16 Drive, Volts 90, RPM 1765. NOTE: 4 TANKS AVAILABLE, 3 WITH MIXERS, 1 NO MIXER. BUY IT NOW PRICE IS FOR ONE TANK WITH MIXER, CONTACT FOR PRICE ON ONE WITHOUT MIXER. CATWALK IS ALSO AVAILABLE FOR ADDITIONAL PRICE. CONTACT FOR LOADED PRICE ON TANKS AND CATWALK. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e16e497bc-0xf9-
|
|
Questions? Call us: 1-877-328-9236. Precision Feedscrews 3" Diameter 83.5" Long Homo-Polymer Extruder Screw. Manufacturer: Precision Feedscrews Model: Unknown Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Precision Feedscrews Condition: Used. Comes in original packaging. The packaging may be shelf-worn. The extruder screw is in good condition. Notes: No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Precision Feedscrews Homo-Polymer Extruder Screw, Specifications: Manufacturer: Precision Feedscrews, Model: Unknown, Homo-Polymer Extruder Screw, Total length: 83.5" Width: 3" Width between grooves: 2.75" SKU: M31N033 For questions regarding this item. ... morePlease reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. This item will be shipped on a pallet via LTL Freight. Please fill out to receive a shipping quote. Buyer pays for all shipping costs. This cost includes professional packing& insurance. If payment is sent before the shipping cost has been added to the invoice. Shipment will be delayed until payment has been received in full. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Local pick up is available for buyer
|
|
|
THIS IS A USED UN-TESTED(BEYOND PLUGGING IN AND SWITCHING ON) CONOPTICS M25 CONTROLLER(MFG. 11-91) WITH ASSOCIATED CABLES(SHOWN) IT IS BEING SOLD AS-IS. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. PAYMENT AND SHIPPING TERMS: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
BOEING. FORD, ITT, TQM ADVANCE QUALITY MANUALS AND BOOKS This package is a compilation of Advanced Quality Systems manuals that I have collected over my engineering career in the quest to minimize variation in manufacturing processes. Whether you have an understanding of Advanced Quality Systems or not the information contained in this package will help you understand how to solve problems and help you make better decisions. Also included is the book TOTAL QUALITY CONTROL FOR MANAGEMENT-STRATEGIES AND TECHNIQUES FROM TOYOTA AND TOYOTA GOSEI by Masao Nemoto. A management expect who orchestrated the growth of Toyota Motors using these methods and a paperback copy of the famous by Philip B. Crosby, book QUALITY IS FREE. The manuals are an excellent introduction to Advanced Quality Systems FROM ... moreBOEING. FORD, ITT and TOTAL QUALITY CONTROL FOR MANAGEMENT. They are an excellent supplement to the executive. Engineer or business man to increase your understanding of statistical analysis and statistical reasoning. In fact you may say that the manuals are a guide that presents a series of structured hands on learning sessions and provides a broad-based introduction to this field of study. The manuals are from the late 80’s and early 90’s but are still very much relevant in today’s competitive world. The entire package will make an excellent addition to your business library. Start with Boeings“Advanced Quality System” manual used by Boeing Suppliers to supply components/parts to Boeing as per the methodology required by D1-9000. This methodology can be used in any other manufacturing environment to statistically control the product process and environment. The manual has detailed tutorial instructions on such topics as key characteristics. Statistical control, capability and other sources of variation to control the production of your product. It is an excellent reference in your quest for answers on how to build a perfect product. 1. TITLE: BOEING-Advanced Quality System-D1-9000(AQS) OBJECTIVE: This manual describes the
|
|
|
Honda engine. 28 in. front drum, 32 in. rear drum. Runs around great. Easy to maintain. s/n 82443 We are open for business 7 days a week in beautiful downtown Scranton PA. Item#K183914 Call Tim/Linda 888-233-9678 Sales tax is collected in PA CA NY and FL. Sellebrity Analytics.
|
|
|
26" W x 12' Long SS Conveyor with High Temp Food Grade Plastic Belt 144" Long 26" Wide Belt SS Construction High Temp Food Grade belting 24" elevation with SS Legs Belt tensioners Just removed from a Major Food Plant! Excellent Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
1-Eimco rotary vacuum filter 8' dia x 10' face. 316 SS 250 Sq. Ft. filter area, Sanitary Eimcobelt design, 105 Cu. Ft. tank volume, 1 1/2 Hp Filter drive. 1 1/2 Hp agitator drive Filter has been removed and ready for shipment
|
|
|
1-S18 Baker Berkins single stage pusher centrifuge. Titanium Grade 2 wetted parts. NEW Basket.010" to.014" openings in wedge wire basket. Machine#45122, Max. RPM 1308. 25 Hp.
|
|
|
Nash liquid compressoe 316 SS"this can e converted to a vacuum pump" Size HP7S.Test#03Y0053, 1450 RPM this pump has a capacity of 1000 CFM@ 80 PSI,you are biding on one pump,I have a 2ed. pump Test#03Y0054,thes pumps look new, stored inside warehouse.
|
|
|
THIS IS A USED PARKER DAEDAL MICRO ADJUSTING LINEAR POSITIONER WITH A STARRETT MIC. IT HAS A 1.75" X 1.75" PLATFORM AND A TRAVEL LENGTH OF APPROX. 75" PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED VIA FEDEX GROUND SERVICES(UNLESS BUYER REQUESTS OTHERWISE) BUYER PAYS ACTUAL SHIPPING COST. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY. THIS ITEM IS SUBJECT TO WALK IN SALE*
|
|
THIS IS A USED UN-TESTED BECKMAN INSTRUMENTS AMBIENT MICROPLATE CAROUSEL CONTROLER S/N 4000A40686. WITH AC. AND RS232 CABLES. WHEN PLUGED IN AND SWITCHED ON THE SCREEN READS: RESETTING THEN. SAGIAN INC. 21FEB1996 ROM VER 1.1.9. THEN, STATUS: STOPPED POSITION: HOTEL#1. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA FEDEX GROUND SERVICES IF IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER. ... moreTHIS ITEM IS SUBJECT TO WALK IN SALE*
|
|
THIS IS A PARKER DUAL AXIS ACTUATOR WITH TWO PARKER HAHN VIX500AE DRIVES. A PARKER OEM 1000 POWER SUPPLY(70 VDC 15 AMP OUTPUT) AND MOUNTED CABLES/ E-TRACK FOR A THIRD AXIS. THE X AND Y AXIS' HAVE APPROXAMATLY 40' MODEL 4061000XRMSD3H12) AND 18' MODEL 802-4090A) OF TRAVEL, RESPECTIVLY AND LIMIT SWITCHES ON BOTH ENDS OF DRIVE. THE MODEL NUMBERS OF THE MOTORS ARE BE231GJ-NMSN(18" AND 03062500011(40" THE X AXIS ALSO HAS A 44" X.5" X 2.75" BLACK ANODYSED ALUMINUM MOUNTING BRACKET. I HAVE TWO OF THESE UNITS AVAILABLE. THEY ARE IDENTICAL WITH THE EXCEPTION OF THE SECOND UNIT NOT HAVING THE(VIX 500AE) DRIVES WITH IT. PAYMENT AND SHIPPING TERMS: BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN ... moreFOUR DAYS OF AUCTION CLOSING. BUYER PAYS(FERIGHT) SHIPPING. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY. ITEM SUBJECT TO WALK IN SALE* a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13e4310e260-0xf4-
|
|
ARBO SYSTEMS SA ELECTRIC VIBRATORY DRIVE AF14 220V A 0.75 NO. V0930 YEAR 2001 USED By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1.All items are sold“AS IS” No warranty or liability is expressed or implied. 2.The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3.We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4.The buyer agrees that the item fits the buyers purpose ... moreprior to bidding. 5.The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6.We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7.All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. 8.The buyer agrees there will be no refunds for any reason. 9.Shipping to the continental US only. Payment must be received within 2 calendar days of auction close. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
ARBO ANALOGTECHNIK SA ELECTRIC VIBRATORY DRIVE AF14 FAB.NR. 281 465 CH 6952 FOR PARTS OR REPAIR By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1.All items are sold“AS IS” No warranty or liability is expressed or implied. 2.The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3.We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4.The buyer agrees that the item fits ... morethe buyers purpose prior to bidding. 5.The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6.We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7.All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. 8.The buyer agrees there will be no refunds for any reason. 9.Shipping to the continental US only. Payment must be received within 2 calendar days of auction close. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
THIS IS A USED KYOWA OPTICAL. RYKOSHA TECHNISCOPE TES-2 MICROSCOPE WITH A MITSUBISHI RAYON ELI-1005 FIBER LIGHT ILLUMINATOR AND A ROLL ABOUT BENCH(WITH LOCKING CASTERS) WHICH MEASURES 35.375" WIDE BY 24.5" DEEP X 30" HIGH. THE ILLUMINATOR AND THE CASTERS WORK EXCELLENTLY BUT THE MICROSCOPE IS UN-TESTED HOWEVER ALL OF THE COMPONENTS IN THIS SET APPEAR VISUALLY PERFECT. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. BUYER PAYS ACTUAL SHIPPING COST. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER. THIS ITEM IS SUBJECT ... moreTO WALKIN SALE*
|
|
THIS IS A VERY SOLID. VERY HEAVY DUTY THREE AXIS ACTUATOR(WITH THE CABLES FOR THE SERVOS) THE FRAME IS BOTH.75' AND 1.0' ALUMINUM WITH A 1.125' STEEL BASE. THE ACTUATORS THEM SELVES ARE PARKER DAEDAL MODEL(X AXIS) 801-4457-02 W/ 12' X 12' PLATFORM AND 12' TRAVEL, Y AXIS) 802-1511A W/ 8.25' X 9.25' PLATFORM AND 17.75' TRAVEL AND(Z AXIS) 802-1512A W/ 6' X 6.125' PLATFORM AND 6' TRAVEL. THE SERVOS WERE MADE BY ALLEN- BRADLEY AND ARE CATALOGUE#1326AS-B310H-21(BOTH Z AND X AXIS) AND CATALOGUE# 1326AS-B310H-21-K3(Y AXIS) THE SPECKS ARE AS FOLLOWS, Z AND X AXIS SERVOS, SERIES A MAX SPEED 6200 RPM KW 0.3 CONTINUOUS STALL TORQUE.7/6.0 NM/LB.IN CONTINUOUS RMS AMPERES.8 AMBIENT 40C. VOLTS RMS L-L 460/3 PHASE RES. 52.4 OHMS 25C. INSULATION CLASS 130(B) PWM ... moreSOURCE: VOLTAGE FREQUENCY 0-310 HZ/TIME RATING CONTINUOUS SPECKS FOR Y AXIS SERVO ARE THE SAME EXCEPT FOR THE FOLLOWING, BRAKE 2.26/20 NM/LB.IN. 24 VDC 0.05 ADC BRAKE COIL 48 OHMS 25C. 63 OHMS RATED 40C. THE BASE IS 12' X 24' AND THE UNIT OVER ALL WITH THE SERVOS ATTACHED IS APPROXIMATLY 34.25' X 49' X 12' PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. BUYER PAYS ACTUAL FREIGHT COST OR ON SITE BUYER PICK UP CAN BE ARRANGED. ACCEPTED FORMS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER. ITEM SUBJECT TO WALK IN SALE*
|
|
|
THIS IS A USED UN-TESTED SMC BRAND BELT DRIVEN LINEAR TRAVERSE. IT HAS A 40" TRAVEL WITH AN OVERALL LENGTH OF 51" PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY! ALL BEST OFFER SALES ARE"AS-IS" THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
Fulflo 4CSF7-2-2 Multi-Cartridge Filter Housing Stainless Steel Description Fulflo 4CSF7-2-2 Multi-Cartridge Filter Housing Stainless Steel This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Fulflo Manufacturer Part Number 4CSF7-2-2 Item/Ship Weight 135 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory ... moreor part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 43503 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping
|
|
Adsco Mfg SXXNCX00 Heat Exchanger/Condenser Description Adsco Mfg SXXNCX00 Heat Exchanger/Condenser This item requires freight shipping please contact us for a quote prior to purchasing. Diameter of openings: 1" 2.5" 6.5" Manufacturer Adsco Mfg Manufacturer Part Number SXXNCX00 Item/Ship Weight 120 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) ... moreAn accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44357 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before sh
|
|
Pfaudler 100GAL Glass Lined Reactor Vessel R289-0408 Tank Description Pfaudler 100GAL Glass Lined Reactor Vessel R289-0408 Tank This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Pfaudler Manufacturer Part Number 100GAL Item/Ship Weight 1142 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not ... moreshown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 43507 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an a
|
|
|
THIS UNIT IS BEING SOLD AS-IS. IT IS UNTESTED, SOME DEBRIS CAN BE SEEN IN THE 4TH PICTURE, OTHERWISE EVERYTHING SEEMS NORMAL. FREIGHT SHIPPING WILL BE AT BUYERS EXPENSE, FREE FORKLIFT LOADING AT OUR SITE.
|
|
|
Used- DCE Dalamatic Envelope Type Reverse Jet Dust Collector. Model DLM 1/3/10, Carbon Steel. Approximate 320 square feet filter area, housing 39" wide x 63" long x 79" tall x 46" coned bottom. Top air inlet, top air outlet with a 1 hp, 3/60/460 volt, 1740 rpm blower. 9-1/2" x 9-1/2" center bottom outlet with a 14" diameter ring. Mounted on 4 legs. ref# 89595 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
shaping tools 1st one has plastics written on it 6 1/8 inch length 2nd one has shapes light metal& plastics written on it 6 inch length we use recycled materials for packing combine shipping check my other listings international bidders; e-mail me for shipping quote before bidding. And pay after You receive invoice absolutely not responsible for foreign country customs: retards. Detains, lags, tardiness, delays, and slow downs buyer is responsible for all duty and customs fees
|
|
J. Little Mercer Co. Inc. C-2357 30 gallon ATTRITOR GRINDER. Model/serial no. type B. Size 30 S,2063. Manufacturer Union Process. Dimensions 24" x 24" dia. Construction/configuration stainless. PSI:Jkt:in jkt 30 psi@ 100 degF. Inlets/outlets open top with 2" ti in lid. 3) 1" jkt, 2" bco. General data has 2 hp pump.O/a 48" x 60" x 90" h. Motor 10 hp. 1749 rpm. Electrical data 460 volt. 3 ph, 6 amp. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of ... moreCustoms paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
Great Shape Pulled working(rotates Freely) Rannie- Copengagen USED: Homogenizer. Stainless steel, 3 plunger, 2 stage. Driven by a 7-1/2 hp Baldor motor, 208/230/460 Volt, 22.2/21.3/10.6 Amp, 1730 RPM, Homogenistor 184199 Sold as is- 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e69a1835c-0xfe-
|
|
|
No Reserve! Hand Crank Scrap metal Turning Boring Shavings Tumbler Dryer Wheel- Can also be used for a Raffle ticket Drum- used on Aluminum. Titanium Etc. to separate the Cutting Oil from the Chips, Has Stainless Steel Tray/ Pan to catch Oil(cutting Fluid) Green Wheel/Basket 17-1/2" diameter x 27" Overall height 46" Tall
|
|
|
REBUILT SEE PICS APPROX SHIPPING WEIGHT: 1750 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. AJ. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Groth 304 Stainless Steel Flame Arrester. Model 7614-02-44- TOD, SN. 76H 28469, Flange Size 2" 150 RF, Set Press. 4"INWDVAC 11NWC. Note: The Item Is Heavy And Cannot Ship UPS Ground. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e6bd0f073-0x100-
|
|
|
Komline-Sanderson Model HR-250 Dissolved Air Flotation Filter( DAF) Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Komline-Sanderson Model HR-250 Dissolved Air Flotation Filter( DAF) We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan
|
|
|
Used- Ingersoll-Rand Air Cooled Rotary Screw Air Compressor. Model SSR-EP50SE. Capacity 194 CFM, rated operating pressure 125 psig, maximum discharge pressure 128 psig, maximum modulate pressure 128 psig. Driven by a 50hp, 3/60/230/460 volt, 3535 rpm motor. Includes an Ingersoll-Rand Intellisys controller, an air-coolant 2 stage separator. Skid mounted with a sound enclosure. Serial# G2575U94174, built 1994. ref# 44871050 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Description SquareTrade © AP6.0 VERY NICE GASCO ASSEMBLY VIBRATORY SYSTEM W/ CONTROL MODEL BV3 You are bidding on a GASCO ASSEMBLY VIBRATORY SYSTEM W/ CONTROL MODEL BV3 This is a very nice system in excellent condition and it is fully guaranteed. 230V Anno- 96 1 AMP 220 Watt Matr. bo51 HZ 60 This auction includes all of the item's shown in the photo's We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us at Dock@dockhardware.com or call 1-800-826-3433 9 to 5 EST. NO RESERVE Please click here to see my other auctions.
|
|
THIS IS A BIOMEK FX STACKER CAROUSEL MODEL 041-00-00210 WITH 4 FX STACKER 10 HOTELS(MODEL 042-0000295) PENDANT AND MANUAL. I DO NOT HAVE THE SOFT WARE FOR THIS UNIT BUT I HAVE TRIED TO RUN IT WITH JUST THE PENDANT AND IT DOES NOT INITIALIZE(ERR CODE 15) SEE PHOTOS) IT ROTATES TO IT'S STOP POINT AND KEEPS BUMPING IT. AS IT IS THAT I HAVE NO WORKING KNOWLEDGE OF THIS UNIT I CAN NOT SAY FOR SURE THAT THIS IS NOT NORMAL WHEN IT IS"OPERATED" WITHOUT THE SOFTWARE BUT FOR THESE REASONS I AM SELLING IT AS-IS PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION END. THIS ITEM WILL BE SHIPPED VIA FEDEX GROUND OR INTERNATIONAL ECONOMY SERVICES UNLESS BUYER REQUESTS ... moreOTHERWISE. I CAN HAVE THIS CRATED FOR ADDED PROTECTION BUT IN THAT CASE IT WILL NEED TO BE SHIPPED AS FREIGHT AND CRATING COSTS WILL APPLY. IN EITHER CASE, BUYER PAYS ACTUAL SHIPPING COST. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13e8f580a46-0xf7-
|
|
|
Tested Working! EB01C Description: syntron. Stainless steel vibrator parts feeder Painted mild steel base. Mode spiral clockwise product rotation 115 volts. 2.5 amps coil, on/off switch with fused protection. Bowl Spiral 18s 12A
|
|
|
THIS IS A USED IAI MODEL S-60 CONTROLLER WITH AC CORD AND CARD. S/N: M1C21082 PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA INSURED FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY. THIS ITEM IS SUBJECT TO WALK IN SALE*
|
|
THESE ARE USED. UN-TESTED INCO GFD 660'S ALL APPEAR TO BE IN COOD CONDITION BUT HAVE SOME BLUE PAINT ON THE REMOVABLE TRIM ON THE FACE PLATES. THEY ARE BEING SOLD SEPARATELY BUT FEEL FREE TO MAKE AN OFFER ON THE GROUP. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WIHTIN FOUR DAYS OF AUCTION CLOSING. THESE ITEMS WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITIN THE"LOWER" 48 STATES PROVIDING THEY ARE PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY! THESSE ITEMS ARE SUBJECT ... moreTO PRIOR SALE*
|
|
THIS IS A USED BUT IN PERFECT CONDITION(LOOKS AND WORKS LIKE NEW) PARKER HANNIFIN(DAEDAL DEVISION) DUAL AXIS POSITIONER WITH.5" MIC.S WITH REMOVABLE ADJUSTMENT KNOBS AND A 1.25" X 1.125" PLATFORM WITH A HEIGHT OF 1.25" PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED TO ANY LOCATION WITHIN THE"LOWER" 48 STATES FOR FREE VIA FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WIHTIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS ... moreSUBJECT TO PRIOR SALE* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ea6496ec1-0x105-
|
|
One Used Senior Flexonics Stainless Steel 316L Braided Flex Hose 3/4" Inner Diameter x 36" Length. 1 1/4" Outer Diameter. All measurements can be viewed within the pictures. This item is being listed this as used but are not positive that it has been used. We just aren’t sure. This item was obtained by our Industrial Asset Recovery Division from a store room on a plant demo job. The pictures are of the exact items you are purchasing, please examine pictures and ask all questions before purchase. Thank you for looking. Details Found on pipe ends: Senior Flexonics 316L SSP(both ends are male) Questions? If you have any questions. Please call Tim 336-266-0887 between 9am-9pm EST. Or e-mail us through Ebay and we will respond promptly. Shipping Costs& Zip Code Info: Buyer is ... moreresponsible for all shipping costs. We do combine shipping. International Buyers: MUST handle your own Shipping and any forms(like customs forms) that would be required for the shipment, we will only provide a commercial invoice and the weights& measurements for the shipment. We will not claim that any items are“gifts” Pick-up an Item: Please call first to make an appointment Sales Tax: North Carolina residents will be required to pay 6.75% sales tax. Payment: Please notify us of your intentions of paying within 3 days after auction ends. We are flexible and understand that you may need a little more time to pay for your item. But please do not abuse this privilege. Purchased items must be paid for within 14 days of your commitment to buy. If the item is not paid for in this time. An unpaid item case will be filed with ebay in an attempt to recoup our listing and final value fees. Once the case is closed. The item will be relisted for sale. Forfeit of Abandoned Items: Maximum storage time is 90 days. The buyer forfeits the item and any payments made when 90 days from the sale date has been reached. No money will be returned for forfeited items. Items are subject to re-listing immediately upon forfeiture. If you think you ma
|
|
|
Manufacturer: FESTO This is a complete FESTO Unit. FESTO Model Numbers: SPC200-MMI-1. SPC200-P01. SPC200-P01. SPC200-MMI-DIAG. SPC200 DIO. SPC200-BP. I.D. SHELF 8.
|
|
THIS IS A USED ULTRA HIGH PRECISION LAB JACK. IT HAS A.1" MOVEMENT WITH AN APPROX. ADJUSTMENT OF.015" PER REV. WITH A 4.75" PLATFORM AND A 6" X 8.125" FOOTPRINT I AM NOT CERTAIN WHAT BRAND IT IS(IT LOOKS VERY MUCH LIKE A PARKER) BUT THE BEARINGS ARE CLEARLY THK AND THE UNIT MAY BE AS WELL BUT IS UN LABLED. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WIHTIN FOUR DAYS OF AUCTION END. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL ... moreOR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE ALL"BEST OFFER" AND INTERNATIONAL SALES ARE"AS-IS" g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ebfd038e2-0xfa-
|
|
|
THIS IS A USED NEWENGLAND AFFILIATED TECHNOLOGIES SYSTEM FOR AN AUTOMATED LASER/ SCANNER. IT COMES ON WHEN PLUGED IN AND SWITCHED ON BUT ASIDE FROM THAT IT IS UN-TESTED AND IS BEING SOLD AS-IS. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION END. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY. THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
|
Manufacturer: SMC Model: NCRB1BW30-180S. Max. Press: 146PSI This auction is for three actuators! Made In Japan. Shelf I.D. 15.
|
|
THESE ARE USED JDS UNIPHASE XCYTE POWER SUPPLYS. TWO WERE UPGRADED TO CY-PS2 IN 2007 AND THE THIRD IS UN-LABLED(MAY BE CY-PS) ALL COME WITH KEYS. I DO NOT KNOW IF THEY ARE FUNCTIONAL AS I HAVE NO WAY OF TESTING THEM. THEY ARE BEING SOLD SINGLY) PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS(THESE) ITEM(S) WILL BE SHIPPED FOR FREE VIA INSURED FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES IF IT IS(THEY ARE)PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPOAL, BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ... moreONLY. THESE ITEMS ARE SUBJECT TO WALK IN SALE. ALL"BEST OFFER" SALES ARE"AS-IS"
|
|
Thermo Electron Neslab M75 Merlin Chiller Up for auction is a used Thermo Electron Neslab M75 Merlin Recirculating Chiller. This unit is in good cosmetic condition when fully assembled. Please refer to the pictures provided below for more details on the condition of the item. We do not have a power cord for this unit. There are some parts that are unassembled. We recieved the unit in this condition. We do not know why it was partially disassembled. Due to its condition. We must sell this item as is, with no guarantees to the performance of this item. Thank You. Good Luck, and Happy Bidding! This item is too large and heavy to ship by way of UPS Ground. As such. Buyer has the option of either having the printer palletized and shipped via freight, or picking it up in person from our warehouse ... morehere in Virginia. Be aware that if shipped freight, buyer assumes all shipping and packaging costs. Please contact us with ALL of the following information for a shipping quote: Your zip code. Whether it will be going to a commercial or residential address, and if you have access to a loading dock or fork-lift. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011 21731. Powered by
|
|
|
Inventory# SD2198 Basket Size: 6" x 6" 1/16" perf.
|
|
|
Manufacturer: FESTO Model: MPYE-5-1/8-HF-010 B. 151693 P807. HW: 0295 PN: 9346. P: 0.10bar/ 0.145psi. Us: 24VDC Uw: 0.10VDC. Shelf I.D. 15.
|
|
|
AMP Pneumatic Arbor Press One side says UF The other side reads G852 Includes tool slide with an air trip when slide is all the way in. Capacity Approx 3" height Approx 3" to center Happy to answer any other questions. Thanks!
|
|
|
3M PPS Paint Prep System Standard Mixing Cup and Collar with 1 pot liner& lid SOLD AS IS USED because it has not been in a box what you see is what you'll receive ALL SALES ARE CONSIDERED FINAL! QUESTIONS ARE WELCOME- QUICK PAYMENT IS A PLUS) PLEASE CHECK OUR OTHER ITEMS THANK YOU& GOOD LUCK!
|
|
|
Used 1.000 LBS. Low Profile Platform Scale, 48" x 48" x 3" High Platform, Load Cell Type SB2-11, Capacity 1K, SN. 287541. Removed From Proctor& Gamble Plant. No Digital Readout Box, Platform Only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ee9766ec1-0x101-
|
|
Syntron 24" Magnetic Parts Vibratory Cascade Feeder Bowl 115 Volt EB-252-A THIS VIBRATORY PARTS FEEDER IS USED BUT IN WORKING CONDITION. IT HAS A BOWL DIAMETER OF 24" IT HAS 2.75" TRACKS. WITH THE NARROWEST TRACKING AT 1" IT HAS A 1.75" X 0.75" CHUTE. IT HAS A BREAKER OR SEPARATOR ON THE OUTSIDE TRACK. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# EB-252-A OVERALL DIMENSIONS: WIDTH: 40" LENGTH: 36" HEIGHT: 25" SHIPPING WEIGHT: 685 LBS OTHER DETAILS: THIS ITEM IS ... moreLOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE IT
|
|
THIS IS A USED LINER(BALL BEARING) POSITIONER WITH A.5" MOVEMENT. IT APPEARS TO BE EITHER A PARKER OR AN ORIEL(BRAND) AND HAS A 3.5" X 3. PLATFORM WITH A 1" APPERTURE AND A FOOTPRINT OF 3" X 4" 3" X 4.5" WITH A.5" MITUTOYO MIC. IT IS IN EXCELLENT OPERATIONAL AND ASTHETIC CONDITION. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION END. THIS ITEM WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES. OTHERWISE. BUYER PAYS ACTUAL SHIPPING COST. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WIHTIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE ... moreTRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO WALK IN SALE ALL"BEST OFFER" AND INTERNATIONAL SALES ARE"AS-IS"
|
|
TESTING& FUNCTIONAL NOTES: This item successfully powers on. All modules power on. But some do not have working power LEDs or fans. We have no reason to believe this item is not working however its functioning status is unknown; we are unable to test the item due to our lack of knowledge and lack of proper equipment for testing. Please feel free to ask us any questions. Therefore we are selling this item without a guarantee. Please bid accordingly! FULL FUNCTIONAL CONDITION UNKNOWN- ITEM ONLY GUARANTEED TO BE AS PICTURED: Our descriptions. And photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive the quantity, components, and level of operation shown in the photos. This does not not represent a guarantee or warranty ... moreabout the item's functionality beyond what is depicted in the photos. In our experience of selling over 10,000 such items, customers are satisfied with these purchases 95% of the time. This means that 5% of the time we expect an item to have limited functionality and/or require repairs. We expect to receive less money for items sold in this condition; as a trade-off, we do not accept returns or offer refunds. We ask that our prospective buyers take these purchase terms into account and bid accordingly. COMPONENTS INCLUDED IN THIS AUCTION: 5) CREST GENESIS 4G-500-6 ULTRASONIC GENERATOR• 5-SLOT CHASSIS• 5) INTEGRATED POWER CORD Unless stated otherwise. Accessories such as Power Cords, Software, AC Adapters, and/or other Cables are not included. COSMETIC NOTES: This auction is for a used item in fair cosmetic condition with scuffs and scratches. See photos for detail. We were unable to fully test this item. Please read above for details. The units have rust and tarnish on the exteriors. The case has rusting on the hardware and fans. Some of the units have missing power buttons, cracked knobs and dials, and fastening screws that are missing the plastic black covers. The functionality of the units are not affected by the
|
|
We bought a lot of tanks from a paint company that was going out of business a couple of years ago. When we received the tanks they were not as described(most were carbon steel instead of stainless) So. We are selling off the tanks that we are not likely to ever use. We are going to be listing many tanks(both Carbon Steel and Stainless) so be sure to see our other items! Approximate Dimensions: Inside Diameter- 45 1/2" Inside Height- 36" Total Height(from floor) 40" Shipping: There are two options for shipping. You can either use the freight calculator and pay what it says or you can arrange your own. Freight Calculator: It's all automatic. Simply pay your invoice and the freight should be automatically included. Arrange your own: We will strap each tank to a pallet at no ... moreextra charge(it may already be done to be ready for quick shipment) We would be happy to load a truck that you have arranged. You simply need to arrange with a freight company and e-mail us a Pre-Paid Bill of Lading for shipment. We will not charge to load a standard flat bed or dock high truck or any vehicle where all we have to do is set the pallet onto the vehicle with our forklift. If you want to send a dude here with some kind of substandard vehicle(think pickup truck and crappy trailer) where we have to spend a lot of time loading him up then that is a different story and we are going to want to get paid for our time! Of course. If your driver(with the substandard equipment) is responsible for loading in that case then it's no skin off of our backs. This would include any vehicle where the need to unpaletize the tanks would be necessary. Shipper MUST schedule an appointment for pickup! Information you need to arrange your own freight: Weight: 546# Actual tank weight) + 50# Approx Pallet Weight& strapping) = 596# Total Weight) Class: This is between you and the shipper. Your freight company will help you determine the freight class. Do we have a Dock: Yes. We get multiple 53' trucks every day. Do we have a for
|
|
|
Good condition. Transducer FT60 Buyer pays 12.00 dlls shipping and handling in Continental US except Alaska. ILAB 456)
|
|
|
Parker Stepper Motor. Motor Drive, and Cable- Zeta 4 Zeta4 Compumotor. Drive also comes with power cord. EMI filter, and AMP wire loom attached. Used. Working condition. Removed from service without issues. I have 5 of these kits. contact me if you need more than 1.
|
|
|
X-ACTO 2 Head Lab Clamp Holder 2 head distance 4.5" This item is rarely used. Like new smoothly move to any degree. Very good condition.
|
|
|
THIS IS A USED NEWPORT BRAND MODEL 406 XY TRANSLATION STAGE WITH.5" TRAVEL AND PLATFORM AND BASE DIMENSIONS OF 5.5" X 5.5" WITH A THICKNESS OF 1.75" AND A 2.25" APPERTURE. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUIST BE RECEIVED WITHIN FOUR DAYS OF AUCTIN END. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS OCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
WE motorservice Leeson Electric authorized distributor and EASA licensed repair facility all in one! Item Description: 1) Siemens VAC Current Sensing Transformer: M/N Notes ZKB 465/515-51-160 C6/ C98130-A1023-C136 Item is in excellent condition and will be tested prior to shipment! Guaranteed to work or your money back! Payment Policy PayPal and major credit cards are accepted, Immediate Payment is required after the winning bid, Item will be shipped immediately on the same or next business day of receiving full payment, Shipping Policy Buyer is responsible for shipping costs, Shipping within the 48 Contiguous United States ONLY, No International Shipping No Delivery to Alaska or Hawaii No P.O. Box Delivery No APO/FPO Delivery Paypal Confirmed Addresses Only Please Items Will be Shipped by ... moreUPS Ground on the Same or Next Business day of receiving full payment, UPS Tracking Number will be provided, Returns Policy This Item is used but in good working condition, Actual Images of item are shown above, Returns are accepted for this listing within 30 days of purchase, Terms Buyer is responsible for shipping fees. A full refund will be issued in these circumstances: Dead on arrival, Fails within 30 days of purchase date, Wrong for the buyer's application, Item lost or damaged in shipping, If you're not sure if the item in this listing if correct for your application. Please feel free to message our eBay account or call 1(616)846-6131 during normal office hours(7am-5pm EST) and one of our knowledgeable technicians will be happy to assist you! About Us Wylie Electric Motor Service Inc is a local. Family owned and operated shop located in Ferrysburg Michigan. We are a licensed EASA repair facility and we service a wide variety of electrical apparatus, including: Electric motors(both AC/DC) servo motors, spindle motors, pumps, transformers, drive rollers, welders, plasma cutters, generators, electrical brakes, and much more. Wylie Electric is also an authorized distributer of Leeson Electric motors and motor
|
|
You are viewing some used Marley Geareducer Company gear boxes that I have for sale. I have three to choose from. These came from a industrial building that was torn down. These reduction gear boxes were in use running chiller fans when they were removed. The maintenance shop for the building had a rebuilt one on the shelves as a back up. These look identical to it- check out my other listings. I am also selling it. These have a 5.50 gear reduction ratio. Two of them have the fan hubs still attached and they also have couplers of some sort on the other shaft. They were all working fine when removed. You can choose which one of the three you want. Or buy more than one- I can ship them on the same pallet. The shaft coming out the top is approximately 2 35/64 diameter. The other shaft coming ... moreout the side is 1 3/8 inch diameter. They each weigh around 500 pounds on a pallet for shipping. PAYMENT AND AUCTION REQUIREMENTS Do not ask me to sell it early. Or take less than the starting price. I will not end the auction for a local sale either. I can load it onto anything that you send to pick it up. Delivery for an additional fee is a possibility within 250 miles of Fulton, Mo, 65251. E-mail me for a quote. I have a neighbor kid that helps me on the farm that will deliver stuff sometimes. I require payment in full within one week of auctions end. Once it is paid for, there is no hurry for you to pick it up- take six months if need be! If you don't come get it after six months have passed since the end of the auction, it will be resold, and my wife gets the proceeds. If you have a legitimate reason why you need to wait longer than six months to pick up your purchase, contact me and we will work something out. If you have any questions, you can e-mail or call me at(573) 219-6611. Thanks for looking and please check out my other auctions! LOCAL PICK UP I am a cattle farmer here in Mid-Missouri. So I am flexible about when you want to come and get items you have purchased from me, but I try and keep a schedule for my fa
|
|
|
THESE ARE GE FANUC SERIES 16 MODEL-B MAINTENANCE. HARDWARE CONNECTION AND PARAMETER MANUALS. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THESE MANUALS WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICCES TO ANY LOCATION WIHTIN THE"LOWER 48" STATES PROVIDING THEY ARE PURCHASED AT THE"BUY IT NOW" PRICE. OTHERWISE. BUYER PAYS ACTUAL SHIPPING CHARGES ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINSESS CHECK. CASHIERS CHECK, PAYPAL, OR BANK TO BANK WIRE TRANSFER. OTHERWISE BANK TO BANK WIRE TRANSFER ONLY! THIS SET IS SUBJECT TO PRIOR SALE*
|
|
This listing is for a Kellogg-American aftercooler. AC-110. This unit has not been tested. It is being sold as is. 115 Volts 60 Hz Model# AC-110 Serial# 888228 Shipping is listed as local pickup only. However, we are happy to provide a shipping quote upon request. We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall ... morebe determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their shipping needs: Small Business Transportation at 888-368-6022 x218. Contact: Gil Freight Quote at 888-595-6298 x1250. Contact: Bob All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Fine Print: Winning bidder ass
|
|
|
10 Gallon stainless steel pressure tank with sanitary connectors. Made in USA by The Cornelius Company. Model number 1896. Serial number 365157. 130 PSI. A few dings, dents and scratches, but holds pressure, shipped with approximately 30 psi of CO2. Shoot me any questions. Posted with
|
|
|
AUCTION IS FOR A TYCO HO SCALE DIECAST METAL BOILER WEIGHT WITH PLASTIC SMOKE CHAMBER FOR THE CHATTANOOGA STEAM LOCOMOTIVE.IT IS UNUSED WITH WIRES.IT IS IN GD CD. THERE ARE NO BOX.I SHIP U.S.A. AND CANADA ONLY
|
|
Morse 11GCT60LR56 60:1 Ratio. 3/4" Shafts 90° Gear Reducer. Sn L93MJ4478, ratio 60:1 speed down, rated 0.34hp. 1750 RPM, input 5/8" with 3/16" key female socket, motor flange 4x 3/8" holes 4.15" O.C. in a square, output shafts 3/4" 1.58" long, 3/16" key slot, footprint 4.5" x 5.2" aluminum body, Used in good functional condition. Some surface rust staining on shafts but no pitting. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting! 2p5ddv.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13f58b7daae-0xf8-
|
|
|
Much sought-after model. Includes. 1546 hours. Excellent condition. Serial no. N7GP00423. 55 hp gross power. Two speed. German-engineered. This is how New Holland describes this loader: New Holland compact wheel loaders pay their way on the jobsite with outstanding performance in a compact. Maneuverable machine. The Universal Link design of the W50TC offers a combination of increased versatility with increased operator comfort and control. The result? You get the job done more quickly and efficiently. Item#J178384 Call Tim/Linda 888-233-9678 Sales tax is collected in PA CA NY and FL. Normal 0 Or you may personally inspect it at our National Headquarters: 570-341-7668
|
|
|
stainless steel 320 gallon tote. 42" X 42" X 42" high. Tare weight 400 lbs.Specification 57. 6 psig. Rated gross 3760 lbs. Built by Mid States Engineers. SN 11-84-5 Item 12008-023 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
ITEM# 11895 USED 2-1/4" SCHENCK ACCURATE STAINLESS STEEL SCREW FEEDER WITH AGITATOR IN HOPPER. THIS FEEDER WILL NEED THE DRIVE REPAIRED ALONG WITH THE TUBE FOR THE SCREW. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at ... moreyour earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
You are looking at a New Garlock klozure oil seal. 21158-1828 63x1828. Dimensions: 2.500" x 3.751" x 0.375" I have 7 Available. Price is for only 1. If you want them ALL. I can give you a better deal so send me an offer. Free Shipping. I will ONLY ship to the United States. No warranties. Expressed or implied. What you see is what you get.
|
|
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in ... morePennsylvania. Almco Supersheen Rock Tumbler Deburr Deburring Tumbler Polishing Machine DB01 DESCRIPTION: ~ Up for bid is a good working Almco Supersheen DB01 rock tumbler deburring polishing machine. The freight shipping weight is 575lbs on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center or Tradeshow Residence Terminal The quote is a"rough estimate" for freight shipping. It takes a moment for the calculator to load a quote. The carrier that is presented in the quote may not necessarily be the one used at the time of shipment. gsrx_vers_522(GS 6.6.2(522)
|
|
Inventory Number: 06131530352 Manufacturer: Description: KEYENCE CCD CV-070 MACHINE VISION. 1/3" CAMERA& RL3536 LIGHT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: CV-070, ONE: RL3536; REMOVED FROM A MACHINE BEING SCRAPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need ... moreto notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell a
|
|
|
Used Bourg BST Booklet Maker. Stitcher, Folder, Stacker Conveyer, 2 Collators, Excellent Condition. The AGR/T is the saddle stitcher, the PA/T is a folder, the TR-T is a trimmer with a conveyer. It also comes with two Collators. In addition to the BT12 Collator there is an additional collator, the BT15 which allows you to include more pages to your booklets. In addition to the pieces listed there are many extras included. The piece of equipment is in excellent condition and is available for immediate pick up. Shipping not available, purchaser must pick up. Please feel free to contact me with any questions you may have.
|
|
J. Little Mercer Co. Inc. 6.500 GALLON FIBERGLASS TANK Stock Number: A-4575 Mfg. Diamond Fiberglass 9 ft. diameter x 135 inch with 6.5 ft. coned bottom Open top Year 2009. Premium Vinyl Ester resin Overall height is 19 ft. 4 inches In service for 2 years. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. ... moreInspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
Questions? Call us: 1-877-328-9236. Lot of 3 Swagelok 316 Braided Stainless Steel Metal 48"L) Hose w/ Tube Adapter. Manufacturer: Swagelok Model: Unknown Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Swagelok Condition: Used. Comes in non-original packaging. There are scratches on the outer assembly from previous usage. The hoses are in good condition. Notes: The hoses were pulled from a working environment. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 3) Swagelok 316 Braided Stainless Steel 48"L) Hose, Specifications: Manufacturer: Swagelok, Model: Unknown, Length: 48" Stainless Steel, Type: 316, SKU: N29N012 For questions regarding this item. ... morePlease reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and t
|
|
|
Lot of assorted brackets and clamps with stainless steel positioning arms. Made by Marbett for use on conveyor systems for positioning of optical and proximity sensors. These are in very good condition with a few scratches and a bit of dust. Powered by
|
|
|
Quadro Comil 194S 5HP Stainless Steel Conical Mill w/ 8" Baskets. Unit mounted in a portable steel frame. Removed from a working environment and comes with approx. 5 8" baskets. We will load and palletize at no additional expense. We can arrange freight shipping to your location if needed, buyer pays actual shipping costs. MFG Info Available at:
|
|
|
BT# 15035 M01A8-080.3Y You are looking for: PARTS FEEDERS B-10 VIBRATORY FEED BOWL 8" 110VAC USED ITEM. FULLY TESTED! 10 DAYS WARRANTY! Manufactured by: PARTS FEEDERS. Additional info: VIBRATORY FEEDER BOWL Bowl Model: B-10 Diameter: 8 inch. Overall Diameter: inch. 110 Volts Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
|
|
General Product Information Mfr. Part Number: Enclosure for Panelview 1000 Touch Manufacturer: Hoffman, Description: Hoffman Stainless Steel Enclosure for Industrial Panel Allen Bradley PanelView 1000 Touch w/ extras. This Item Details You are bidding on: One Hoffman Stainless Steel Enclosure for Industrial Panel Allen Bradley PanelView 1000 Touch w/ extras. In excellent cosmetic condition. Notes: Dimensions: 16x16x7.8 in. Door cutout: 13.25x10.2 in. PLEASE SEE THE PICTURES BELOW. Condition: Used Shipping and Warranty Availability: In Stock Shipping Date: Same business day. If cleared payment received by 6 PM EST, Warranty: 60 DAYS Money Back. Buyer pays return shipping, This Item Pictures Shipping Shipping Date: Same business day. If cleared payment received by 6 PM EST, Carriers: US Destinations: ... moreFree FedEx Ground Service International Orders: USPS Express Mail International(insured) Expedited shipping is available for an extra fee* International buyers pay all customs duties. Taxes& brokerage fees Payment Payment Methods: Credit Cards, Wire-transfer: contact us for payment instructions* Payment MUST be received within 7 days after the purchase* International buyers without PayPal: contact us before bidding* MD residents pay sales tax unless tax exempt Warranty and Returns Warranty: 60 DAYS Money Back. Buyer pays return shipping Product Returns: Return Authorization is required for all Product Returns Warranty and Returns are subject to our Products must be returned in the same condition as delivered Contact Us Company Address: PLC Hardware 11706 Garrison Forest Rd Owings Mills. MD 21117, USA Mon-Fri: 8:30am- 8.00pm ET Toll Free: 1. 877. 887. PLCH Email: PLCHardware.com We buy Allen Bradley and Siemens parts
|
|
Description TESA RUGOSURF 90G Graphical Portable Surface Roughness Tester Type 06930012. Excellent Working& Cosmetic Condition. Vers. 2.6 06/07/07. Includes 9 Probes: 3 x SB60/10 06960039(Probe with contact skid- For surfaces and bores with external diameter over 10 mm or internal diameter smaller than 6 mm. Probe without contact skid- For surfaces and small bores with diameter. From Ø 4 mm. 1 x SB20P 06950050(Probe for grooves. Max. depth 5 mm. 2 x SB30P 06960051(Probe for small bores from Ø 4 mm. 2 x SB60/10 06960067(Same as 06960049. But with a diamond tip, R=2 µm. Info: Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in ... morethe item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|