|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Lift Tables. Country of Manufacture USA. We are dedicated to understanding the unique challenges and opportunities that each industry faces. LET'S STAY IN TOUCH. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids $125.00 Shipping
Condition: Used Location: Sun Valley, United States
If the item is listed as working, then it was tested to the best of our ability.
0 bids $65.00 Shipping
Condition: For parts or not working Location: Chino Valley, United States
Used part. Turns freely. Has wear from use and age. Needs to be cleaned up and rebuilt. Only the hardware pictured is included.
0 bids Free Shipping
Condition: Used Location: Elk River, United States
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
The actual size is 6x12". Three magnets with grate on top. Lift Tables. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids Free Shipping
Condition: Used Location: Cincinnati, United States
Motor Horsepower 1 HP. Floor Space Required, L x W 37" x 24". Basket Depth 12". Running Speed 825 RPM. Weight Capacity, Including Basket 75 LBS.
0 bids Free Shipping
Condition: New Location: Middlebury, United States
Model: IC50502522GIM. MPN: IC50502522GIM. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.
0 bids Free Shipping
Condition: New Location: Ontario, United States
NEW 25 cu. ft. Double Ribbon Blender. • Sanitary T-304 Stainless Steel Construction. Motor：SEW/NORD Drive Material：304 Standard or 316 Stainless Steel Finish：High-Polished Sanitary Finish Legs：Adjustable stainless steel legs.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 12" of Fiberglass Leads. 120 Watts and 120 Volts. P/N: SH0498.
Buy It Now
Free Shipping
Condition: New Location: Palmdale, United States
316L Stainless Steel. 2" End Cap.
Buy It Now
$13.20 Shipping
Condition: New Location: Doniphan, United States
This is a rotating CIP spray ball with a 1.5" tri clamp end and a 2" ball. Spray balls are fluid driven, and are typically used in the beverage industry to clean the interior of storage tanks and piping, using a scrubbing-like effect.
0 bids Free Shipping
Condition: Used Location: El Paso, United States
30.0000 x30.0000 x37.0000. Tested good.
0 bids $3.00 Shipping
Condition: New Location: Wichita, United States
AMETEK 5X939 PRESSURE GAUGE 0-60 PSI
0 bids $15.00 Shipping
Condition: Used Location: Wayne, United States
COOPER TOOLS. Our friendly staff is eager to assist you in any way we can! We want to learn from you! You agree that our sole and exclusive maximum liability arising from any product sold on this site shall be the price of the product ordered.
0 bids $20.00 Shipping
Condition: Used Location: Sun Valley, United States
The units will be sold as a lot of 2. If the item is listed as working, then it was tested to the best of our ability. Unless a resale certificate is provided. HOURS OF OPERATION. This item is as seen in pictures.
Buy It Now
Free Shipping
Condition: New – Open box Location: Waynesboro, United States
0 bids Free Shipping
Condition: Used Location: Salt Lake City, United States
LAM RESEARCH ROCKER 3 POSITION 715-008004-001 P/N 853-007861-231 30 Day Warranty.
0 bids Free Shipping
Condition: New – Open box Location: Eugene, United States
557-0004 Gauge.
0 bids Free Shipping
Condition: New Location: Bellport, United States
Buy It Now
$4.95 Shipping
Condition: New Location: Scottsdale, United States
This is for one clear schedule 80 1/2" static mixer. When fluids are pumped through the mixer, they are progressively divided and recombined the result is efficient inline mixing. This mixer can be built to your specifications.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
There are 12" of Fiberglass Leads. or 262 Watts if used on 240V. 240 Watts and 230 Volts.
Buy It Now
Free Shipping
Condition: New – Open box Location: Gurnee, United States
0 bids Free Shipping
Condition: New – Open box Location: Osseo, United States
Full size truck access and forklift is acceptable. More Information Office Hours The Original Manufacturer's warranty does not apply. This is a surplus item. SKU# SB-176832.
Buy It Now
Free Shipping
Condition: New Location: Buffalo, United States
0 bids Free Shipping
Condition: New – Open box Location: Knoxville, United States
With our dynamic pricing model, our prices are always competitive.
Buy It Now
Free Shipping
Condition: Used Location: Woodbury, United States
We will respond to you within 24 hours and do our best to help you out!
0 bids Free Shipping
Condition: Used Location: Scottsburg, United States
Thanks for looking. Message if any question
Buy It Now
Free Shipping
Condition: New – Open box Location: Broussard, United States
We will respond within 24 hours. IMPORTANT INFORMATION. Surplus new: box may have wear from storage and handling.
Buy It Now
Free Shipping
Condition: Used Location: Greensboro, United States
Was taken off a working 230 ton van dorn. Excellent condition.
0 bids Free Shipping
Condition: Used Location: Brookpark, United States
We can provide freight quotes. we can either use your account number or provide a rate quote.
Buy It Now
$50.00 Shipping
Condition: New Location: Watertown, United States
Pump not included. This system is made out of polypropylene. Other features include removable filter bowls, dual filter heads, a 1/4" thick steel bracket for mounting, drains on the bottom of the bowls, allViton O-rings, and 1" NPT female pipe thread ports.
0 bids Free Shipping
Condition: New Location: East Falmouth, United States
VLIER SC-344 SWIVEL CLAMP PAD, 1/2"-13" X 3.5” L, STEEL Lot Of 8.
0 bids Free Shipping
Condition: New Location: Farmington, United States
WEKSLER Item Number: A960AF5AL. Manufacturer: WEKSLER. Range (F) -- 30 Degrees to 240 Degrees F. Scale Divisions -- 2 Degrees. Case Material -- Die Cast Aluminum. Scale Color -- White. Accuracy -- +/-1 Scale Division.
Buy It Now
Free Shipping
Condition: Used Location: Douglassville, United States
L&R Quantrex Q280H Ultrasonic Cleaner 12x10x6 Tank 117V 3.60A WORKING. Pulled from working lab!
0 bids Free Shipping
Condition: New – Open box Location: Belton, United States
SEAL, CYLINDER BOOSTER INSTRON 33-6-1X YARN TESTING TEXTILE AS SHOWN
0 bids Free Shipping
Condition: Used Location: Compton, United States
Lightnin Mixer SPX. 1/4 HP 440 Volts 1725 RPM. Direct and gear options for this global use mixer provides full range of shaft speeds (RPM). 1750, 350, and 280 (60Hz)Direct and gear options for this global use mixer provides full range of shaft speeds (RPM).
0 bids Free Shipping
Condition: Used Location: Portland, United States
Firerod Series.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model # KWY147 byKaufhof. Its flared end provides an easy connect and disconnect with other fittings. Use with a hose clamp for best connection. Replaces Big Horn 11424. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion.
0 bids Free Shipping
Condition: Used Location: Baroda, United States
If you are not able to pick up locally, we are able to get competitive freight quotes as well.
0 bids Free Shipping
Condition: Used Location: Downey, United States
SDN 20-24-200.
Buy It Now
$20.00 Shipping
Condition: Used Location: Eau Claire, United States
Bunting Magnetics FF Stainless Magnet Metal Drawer Trap 6 1/4” x 6 1/4” x 4”. Back side has had some repair welding done on it.Check pictures
Buy It Now
Free Shipping
Condition: New – Open box Location: Peoria, United States
Buy It Now
Free Shipping
Condition: New – Open box Location: Wolcottville, United States
6-1/8" Diameter at Bottom. 7-3/16" on Flanged End. 2-3/4" ID. 26-1/2 Over all length. Make Unknown. Believed to be used on Water System?. May be Ametek?..
0 bids Free Shipping
Condition: Used Location: Houston, United States
Model POM - 566B. Review photos and video to see condition of unit. Temp Range to 300degrees C / 572degrees F.
0 bids $15.00 Shipping
Condition: New – Open box Location: Kansas City, United States
Polyester Felt Bag Filter Poly Ring Micron 14 Bags Total Not Sure Size 18x8 In. Shipped with USPS Ground Advantage.
0 bids $300.00 Shipping
Condition: Used Location: Plattsburgh, United States
Neri Tamper Evident Labeler Model BL400 LIKE NEW . Video will open in a new window. Paste Link Into A Browser Window:[isdntekvideo]. Manufacturer's Warranty and Support DO NOT apply.
Buy It Now
Free Shipping
Condition: Used Location: Denver, United States
WE LIST AND DESCRIBE TO THE BEST OF OUR ABILITY AND KNOWLEDGE. WE LIST ALL THE INFORMATION ON HAND TO US. WE WILL TRY GIVE YOU THE BEST ANSWER POSSIBLE. WE DO THIS TO RECYCLE MATERIAL AND BE ABLE TO HAVE COMPETITIVE PRICES.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
Buy It Now
$25.00 Shipping
Condition: Used Location: Fountain Valley, United States
Asyst SMIF Wafer Case Transfer Pod, 8" (BTG Asset: 58525). - Internal Wafer Transport Carrier: Entegris KA198-80MB STAT-PRO 3000, 25 slots. - Part Number: 4001-7102-01, 4001-4302-XX.
Buy It Now
Free Shipping
Condition: New Location: Gaithersburg, United States
IBM Wheelwriter 3, 5, or 6 typewriters for their daily operations. United States. It is not a custom bundle and has not been modified in any way. and provides high-quality printing results. you can expect crisp and clear printed text.
0 bids $12.00 Shipping
Condition: New Location: Plattsburgh, United States
Condition NEW. Manufacturer's Warranty and Support DO NOT apply. We are NOT Authorized Distributor of this item. SKU SPEC-1745-E.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11424. Use with a hose clamp (not included) for best connection.Features Tapered on one end. One end designed to accept hose. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion.
0 bids Free Shipping
Condition: New Location: Salt Lake City, United States
Box of 44 #2 Filter Bags. 800 micron. Size 2 (7 x 32).
0 bids Free Shipping
Condition: Used Location: Cedarburg, United States
Model #: 121925. Power: 23 kW, 230V, 3ph, 60 Hz. WE'LL DO OUR VERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION.
0 bids $4.45 Shipping
Condition: New Location: Merritt Island, United States
P/N: CHX11706.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11416. The taper will allow for a snug fit and quick removal of the splice if it is necessary to move the line to another machine. FLOOR POLISHING MACHINES/PARTS. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion.
0 bids Free Shipping
Condition: New – Open box Location: Oakland, United States
6" Flanged Immersion Heater Model ES-40480-064 Volts 480 PH 3 KW 40.
0 bids Free Shipping
Condition: For parts or not working Location: Cambridge, United States
THIS IS A USED UNTESTED UNIPHASE CYONICS ARGON LASER MODEL 2201-20SLE.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine110V 1400r/m TOP. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
|
|
|
One Stainless Steel Developing Tank with Floating Lid. The tank measures approximately 10-1/2 X 10-1/4 X 4-1/2. This has been sitting for a very long time and needs cleaning. I have selected USPS Parcel Post as the shipping method. But would be happy to ship any way you might like. Please feel free to call or e-mail me with any questions. Unfortunately eBay does not allow me to put my studios website address here, but you can find us by doing a Google search, so you can buy with confidence. John Gaspar Photographers 470 Atwood Avenue Cranston. RI 02920(401)943-3040 Please view my other eBay listings for more great items! Power light with Altman/Drama Optical Spot. Various Film Holders. Colenta RA Paper Processor, Camera Brackets, Wollensak Lens Betax No.4, Panasonic Video Camera. Nord Front ... moreProjection, Various Portable Backgrounds, Waist Belt Batteries, Oscar Fisher Chemical Mixers, Dry Mount Press, Burke& James 5X7 Camera, Tripods, Durst Printer, Lucht Package Printer, Silver Recovery System, Art Leather Blue Inserts, Negative Cropping Cards, Stainless Steel Tanks, Manfrotto Dolly, Film Hangers, Various Bulbs, Saturn Large Format View Camera, Water/Chemical Filters, C41 Stabilizer-Replenisher. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13c9de33a06-0xff-
|
|
|
120 Gallon Capacity Chocolate Mixing Tank- P& K Equipment. Inc. fax: 216-831-7779 120 Gallon Capacity Chocolate Mixing Tank
|
|
ITEM# 06042 14" ELUTRIATOR CYCLONE STAINLESS YOUNG USED 14" DIAMETER ELUTRIATOR-CYCLONE. STAINLESS STEEL. OVERALL HEIGHT IS 36" CLEAN AIR OUT IS 3.5" O.D; 5" MATERIAL OUTLET IN BOTTOM; INLET IS 2: FLANGED EXPANDING OUT TO 3.5" O.D. DESIGNED AS A CYCLONE AND ELUTRIATOR TO SEPARATE DUST FROM PELLETS. EXCELLENT CONDITION. YOUNG INDUSTRIES IS MANUFACTURER. SN IS EL-18; SIZE 14; SO# 12662-1. PRESSURE RATING IS 9 SPIG AT 100°F. BUILT IN 1996 ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's ... morecheck. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
2 Stainless Steel Chemical Tanks appox. 500 gallons ea Auction is for BOTH TANKS appox. s hipping weight 1000 lbs. Pickup details; Free Local Pick-up or arrange for F reight Service $75 crating fee for shipments. Dimensions; O.D 55” X 78 H“ O.D 52” X 85 H“ Sold"as-is/where-is" with no expressed or implied warranty. The items have not been tested. All sales are final. Please refer to pictures in regards to item condition. If you need any further information. Please let us know.
|
|
|
Vintage Gen Mach Prod Co Pulley Industrial Machine Age Steampunk. 4 7/8” diameter metal pulley wheel is 3.5” wide. Total size with frame is 11.5” X 6.5” Raised lettering Gen. Mach. Prod. Co. In good condition. Some use wear to paint. See photos. Winning bidder pays with Paypal. 6 lbs. shipping. See my other vintage Collectable auctions. Thanks.I will combine shipping on multiple purchases when possible. Traditional Payment Methods Accepted. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13df8f2db5e-0xfe-
|
|
|
100 Gallon Capacity Stainless Steel Mix Can- P& K Equipment. Inc. fax: 216-831-7779 xx
|
|
Up for Auction A Gelman Sciences Pressure Vessel Prod# 15203 Capacity 19 Liters(5 Gal) 140 PSI M ax WP 100 F Includes Gauge and Attachments as shown in photos Used- Appears to be in Excellent Condition Lab and Mfg. items are salvage from a working manufacturing site that closed. Please check out my other listings- you may find more you like! Please Read Prior to Bidding! Shipping We make every effort to ship within 24 hours after cleared payment. Shipments are typically made via USPS First Class mail or USPS Priority Mail. Depending on the weight of the shipment. Some heaver items are shipped UPS if we can save you money by doing so. We make every effort to reduce your shipping cost by combining shipments. We ship to the Continental USA only. Payment Payment is due within 3 days of purchase. ... morePlease contact me immediately if you if you experience a problem. If you do not agree to pay within this time limit please do not purchase until you have the funds to pay for the item. Unfortunately we will file NPB reports on those who do not pay properly. We accept payments through Paypal– you can pay with a credit card without having an account. Returns We want to make sure you are satisfied that what you have purchased is what was listed in the auction. If for any reason you receive a wrong item or feel it is not as described please let us know and we will refund your purchase price less shipping charges if the item is returned to us in the same condition it was sent to you within 14 days of the original auction end. Multi-purchases If you intend to buy several items please do not check out until you have won/purchased all of them. Then please ask us for an invoice to combine all of your items into a single shipment with combined shipping cost. This reduces confusion, saves money and assures you that your order will be handled properly and efficiently. Feedback If you have issues or concerns with our service or product quality. Please communicate with us in a respectable manner so we can come out with a fair solutio
|
|
|
Newport Optical Breadboard 1' x 2' x 4.375" 25" 20 Sealed Holes on 1" Grid Research Grade Thick Stainless Steel Top INCLUDES: free) Wood Box Packaging& Insured Ground Shipping Anywhere in the Contiguous 48 States All In Very Good Condition ~ Satisfaction Guaranteed Payment and Shipping Terms: Buyer must make contact within 24 hours of auction end to arrange payment and shipping. Payment must be received within 4 days of auction closing. Free crating& insured ground shipping anywhere in the lower 48 states ~ otherwise buyer pays actual shipping cost. Accepted Forms of Payment: CASHIER'S CHECK. BUSINESS CHECK, MASTERCARD, VISA, BANK WIRE TRANSFER*Items subject to walk in sale*
|
|
Item Information Item Name: 11" Vibratory/feeder Bowl Item# 10232 Price/Each: $159.00 Year: Brand Name: Model: Serial# Asset Tag: 4042 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description 11" Vibratory Feeder Bowl 110 Volt 11" Outer Dia. 8.5" Inner Dia. Stamping on Casting: P037-6002 B-14-B 49 lbs L-13" x W-11 3/4" x H-9 1/4" Shipping/Boxing Fee At Time Of Sale. Contact Us About This Machine Should you have questions. Please contact Jack at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by ... morecheck will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all s
|
|
|
Description Atlas Copco Air Compressor. Year 1992, Serial 10832-92, 38506 Hours Payment Wire Transfer | Cash. Shipping Customer responsible for all transportation charges. We help to load. Terms of Sale Merchandise must be paid before removal. Buyer is responsible for the inspection of the merchandise prior to make any purchase. Equipment is sold as is where is. About Us AJ Equipment is a company located in Los Angeles. CA with over 2 decades of experience in the general trading of heavy equipment. Contact Us Tel: 1 563-289-7253.
|
|
YOU ARE LOOKING AT A 500 LITER SFI STAINLESS STEEL BAG HOLDING TANK JACKETED& ON CASTERS MFG 2007. Unit was acquired from a local laboratory and was stored in a clean room. The entire unit is mounted on casters and includes a bottom drain. Side door. Please see photos for more details and condition. You can arrange your own shipping or we can provide you with a freight quote. 09-R0477SL CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for ... moreitems that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the date you
|
|
|
Used 50 gallon stainless steel vertical tank. Approximately 28" diameter X 30" straight side. Open top with flat cover. Flat bottom. Built by Permasan. On 4 legs with wheels. Item 11434-014 Price: $1250 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
|
Sold Each! 55 Gallon Stainless Steel Drum No lid. Just open top. Sanitary Construction. Great for moving. Transporting Food, Wine, Pharmecueticals. They all have some dents like you see in the pictures. They were last used in a Soup Factory. No outlets or fittings, Just Heavy duty stainless steel type, great for mixing and stirring. All of them are clean inside. Make offer on one or all. $50 palletizing fee for up to four barrels that can fit on one skid. Buyer pays all shipping. contact us for a shipping quote.
|
|
|
REX TABLETOP SSC 812 PLUS STEEL TRACK LENGTH- 3300mm WIDTH- 190mm EACH SLAT: LENGTH-190mm WIDTH-35mm#Z79 AS PHOTOS BELOW ANY QUESTIONS PHONE PAUL ON 07860 178131 10am to 10pm 7 DAYS
|
|
ITEM# 02673 USED SUTORBILT POSITIVE DISPLACEMENT BLOWER; MODEL 3M-F SERIAL NO. 291287. BARE SHAFT BLOWER. 2 1/4" OUTLET. FREELY HAND ROTATES. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. ... morePlease be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Used resin pump from GlassCraft gun.Good for parts-not working condition.Should you have any more questions please call 904 583 6527.
|
|
one) Rolling mill. 4" wide x 2 1/8" diameter. Arbor appears to be about 1" diameter. Powers up and runs fine. ¼ hp DC motor. Conveyor belt is 3" diameter stainless steel, 32" long. Manual roll adjustment. Maximum opening is about ¼" The entire structure seems to be made of anodized aluminum. Dayton DC speed controls, 115 vac input l. This unit has a motorized traverse setup that is incomplete. An Ecentric was designed to move a linear slide block perpendicular to the roll feed. The slide carraige is missing along with any related tooling. Footprint is 38" x 22" x 22" $145 shipping in the continental U.S You can send text messages to my cellphone at 9374165497@vtext.com D-6654, 55, 56, 57, 58 If you have any questions. Please email me! ... moreHappy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $145.00 tru International Shipping. $1200.00 s FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Control Number 2012-10-12 3/8" SS Angle Tank constructed with SS 1/8" Very Heavy Duty Constructed SS Tank. One 3/4" hole in one end. Tanks measure 13" Deep X 22 1/2" Side and 42" long inside measuremnets. Tanks weight is 250 lbs with pallet 300 lbs. Will place on pallet and provide loading assistance
|
|
|
MDC CF Conflat 2 3/4( 2.75) Bellows w/1 Rotatable Flange Sharp Knife Edges If not satisfied return ship withinseven days for refund less shipping. NO INTERNATIONAL SHIPPING lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e2bc2b863-0xfc-
|
|
|
ISO 80 to NW 40 Vacuum Stainless Adapter NW80 to NW40 Following is from the Ideal Vacuum Products web page; Product: Condition: New Part Number: P104046 Price: $165.32 If not satisfied return ship withinseven days for refund less shipping. NO INTERNATIONAL SHIPPING
|
|
|
ON VACATION UNTIL 20 MARCH 2013 Nor Cal NW40 Pneumatic Vacuum Valve w/Swagelok Fittings and Humphrey Solenoid- Model ILVP-1502-NWB- Appears to be unused Following from Nor Cal web page; ILVP-1502-NWB 1.5" Pneumatic Inline Valve. NW-40 Flanges $435.00 NO INTERNATIONAL SHIPPING
|
|
|
ON VACATION FROM 10 TO 19 MARCH SO DELAYED SHIPPING ON THIS ITEM! KF 40 NW 40 90 degree Vacuum Elbow Stainless Steel- Excellent Condition Following from the Ideal Vacuum Products web page; Product: Elbow 90 KF-40 Vacuum Fittings. ISO-KF Flange Size NW-40, Stainless Steel Condition: New Warranty: Against Product Defect Part Number: P101224 Sale Price: $69.30 NO INTERNATIONAL SHIPPING
|
|
SEARCH OUR PRODUCTS 20' Flexible Bellows Vacuum Hose SS Flanges NW50/KF Product Description This is a 20 Foot piece of Industrial Vacuum Hose with Stainless Steel Kwik-Flanges. These types of hoses are commonly used in Industrial Environments to connect various high vacuum systems to one another. This assembly is used& there is a light film of dust/dirt inside. The exterior of the hose. As well as the flanges& clamps, are in good physical& cosmetic condition with only minor scratches or scuffs on them from normal use& storage. The bellows on these hoses are very stiff& are reinforced with metal. No testing was done. Specifications Quantity of Hoses: 1 Length: 20' O.D. 2.34" Quantity of Clamps: 2 Quantity of Kwik Flanges: 2 Size: NW50 ISO-KF, iCosmetic appearance ... moremay vary slightly from pictured unit(s) No manuals. Cords/cables, or additional accessories are included if not listed or shown. SKU: K50H007 Warranty Information The item/s in this auction are being sold AS-IS with no warranty. No refunds, no returns. Please bid accordingly. Contact Info Business Hours- toll free: 877) 328-9236- local: 512) 933-0081- fax: 512)873-0745 Monday to Friday from 8:30 am to 5:30 pm CST Closed on Saturday and Sunday Company Policies PayPal Must ship to a confirmed address, Visa/MasterCard/Discover/Amex US and Canadian issued cards only. Must ship to the billing address of the credit card. Orders over $1.000 require a signed. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. We do not allow the buyer to arrange their own shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. The buyer is responsible for any customs. Duties, taxes, broker fees, etc that are incurred. We do not know what these fees are and have no way to calculate them. You will need to speak to your local
|
|
Used Jay Bee 3 hammermill: Heavy duty base Magnet for metal removal 50HP. 3600RPM motor Unit has built-in blower 1 set of used rods and hamers Proven heavy-duty and efficient design 15-day right of return These units are commonly used as a grinder for wood chips. Sawdust, animal feed, fertilizers, chemicals, and a wide variety of other size-reduction applications. Freedom Equipment has helped hundreds of customers with their pelleting. Packaging, and processing applications. If you have any questions or need any assistance Call 815-226-9150 or email robert@freedomequipment.com Freedom Equipment Specializes in: Pellet Mills. Pellet Mill Plants, Pellet Coolers Screeners. Shakers, Sifters, Grain Cleaners Dehydrators. Dryers and Drying Systems Hammer mills. Hogs/Chippers/Grinders Crumblers. Flakers ... moreand Roller Mills Packaging. Processing and Plant Machinery Available from Freedom Equipment: Equipment Appraisals. Liquidations, Equipment Rebuilding Services, On-site Repair Service, Installation Services, Consulting Services, as well as quality New, Used, and Reconditioned Machinery. Industry Experience: General Feed. Aquaculture, Wood Pellet and Biomass Pellets, Organic and Inorganic Fertilizers, Plastics, Food Packaging and Processing, Pet Food, Pharmaceutical, and Chemical Industries. F R E E D O M E Q U I P M E N T Pelleting. Packaging, Processing& Plant Machinery Customer has a 14 day right of return for the full purchase price of the machine if not fully satisfied with this machine. Customer is responsible for all crating costs. And shipping charges both ways. Item must be received within 14 days from the time the unit is delivered. All invoices not paid within 10 days may be canceled without notice. Purchase prices do not include shipping. Crating or skidding. Please contact Freedom Equipment to make shipping arrangements for your equipment, or for shipping/crating/skidding quote. Purchase prices do not include any federal, state, or local taxes. Buyer is responsible for determining if such sales tax is applic
|
|
one(1) Rota-Sieve Centrifugal Sifter Model RS-91. 20A 480V, 6” DIA inlet,11”DIA Discharge X 27” height, 5 HP Continuous duty reliance motor 230/460V 3 PH. Particle sizing and separation. For applications that require scalping, sifting, classifying and/or screening. Weight(lbs) 750 Volatage 230/460 Motor HP 5 Motor Speed(RPM) 1750 Motor Current(Amps) 9.2/4.6 Rotor Speed(RPM) 725 Screen Area(Sq. In. 410 All Mohr Corporation Auction Items are sold“AS-IS” and“WHERE-IS” and“without warranty or guarantee expressed or implied. All successful bidders at Mohr Corporation Auctions must pay for purchases in full within seven(7) days from end of auction. Purchases must be removed moved within fourteen(14) days from end of auction unless other arrangements have been agreed to in writing by Mohr Corporation. ... moreMohr Corporation accepts the following methods of payment: Bank Wire Transfer. Approved company check, and PayPal. All payments must clear to Mohr Corporations account prior to removal and shipment of purchases. Following payment in full by Mohr Corporation. Customers will be provided the location address for pick-up/shipment of purchases. All scheduled removal of machinery and equipment must be made through Mohr Corporation and comply with prevailing regulations on site which is generally a manufacturing facility to which Mohr Corporation is under exclusive contract as liquidating sales agents for sale of the assets offered. Mohr Corporation will assist buyers to identify any required contractors and other assistance for removal and shipment of purchases to the buyer’s shipping destination globally.
|
|
|
Quadro- Comil. Model#194S, Serial#194-0298. This Comil has been cleaned up and reconditioned, and is in excellent cosmetic and functioning condition, as pictured. It is configured as an Explosion Proof unit, and has a 5HP, VariDrive unit on it. Previously used in a cosmetics manufacturing facility. Buyer to pay for shipping. Via motorfreight, in the lower 48 states. Thanks for looking and hopefully purchasing. inkFrog Analytics.
|
|
ITEM# 07384 USED 250 GALLON FRP MIXING TANK 42"Ø X 42" STRAIGHT SIDE LENGTH. CARBON STEEL FRAME, 2- PIECE PLASTIC LID, INCLUDED STEEL BRIDGE SUPPORT FOR MIXING MOTOR(NOT INCLUDED) CONE SHAPED BOTTOM WITH FULL STEEL SUPPORT, 3"Ø ANSI 150 SLIP-ON PLASTIC FLANGE. DISCHARGE HEIGHT: 16" OVERALLL HEIGHT: 70.25" ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by ... morePayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
THIS IS A PARKER THREE AXIS POSITIONER. 5" MIC ON EACH WITH 1.125" POSIBLE MOVEMENT ON BOTTOM PLATFORM AND 1" ON TOP. TOP PLATFORM HAS AN APPROX. DIA. OF 2.5" WITH AN APPROX. ROTATION OF 35 DEGREES PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN FOUR DAYS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE SHIPPED FOR FREE TO ANY LOCATION WITHIN THE"LOWER" 48 STATES VIA FEDEX GROUND SERVICES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. PAYMENT AND SHIPPING TERMS: IF THE BUYER IS LOCATED WIHTIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY. THIS ITEM IS SUBJECT TO WALK IN SALE*
|
|
|
American Lewa High Pressure SS. Pumps" Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) American Lewa High Pressure SS. Pumps We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e571e92ed-0x101-
|
|
Fette Perfecta 1000. Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Used Fette Perfecta 1000. Built in 1985. 28 Station, Pre- Compression, Stamped �B� Tooling, Mechanical Feeder, 3 Phase/ 60 HZ. 480 Volt. All Tablet presses sold with all DEA requirements. Hurricane Sandy Damage This machine is Hurricane Sandy Flood Salvage! It has been exposed to 39 inches(apx) of brackish water. It is offered AS-IS! Inspection is recommended. Offers or package deals may be considered. All sales will comply with DEA regulations. USA sales only unless approved. We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan Powered by The ... morefree listing tool. List your items fast and easy and manage your active items.
|
|
|
40 HP U.S. Motors Electric Motor ITEM DETAILS HP- 40 RPM- 1750 Voltage- 220/440 Frame- Amps- 36/18 Phase- 3 Hz- 60 Mod. All Sale Finale No Return Ship to USA Only
|
|
YOU ARE LOOKING AT AN APPROXIMATELY 600 LITER CHEMICAL HOLDING TANK- CORROSIVE LIQUID STORAGE TANK ON CASTERS W/ A RELIANCE IMPAK PLUS VS DRIVE. Unit was acquired from a local laboratory and was stored in a clean room. The entire unit sits inside a metal cage and includes a bottom drain and cover. Please see photos for more details and condition. You can arrange your own shipping or we can provide you with a freight quote. 10-LI103HL CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There ... moreare no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With
|
|
ITEM# 11773 USED WILDEN 316 STAINLESS STEEL DIAPHRAGM PUMP M15 SERIAL NUMBER: 0020109463. ALL 316 STAINLESS STEEL CONSTRUCTION. 3"Ø FLANGED CONNECTIONS ON INLET/OUTLET, MOUNTED ON A CARBON STEEL BASE FRAME. INCLUDED BLACOH SENTRY PULSATION DAMPENER RATED FOR A MAX. PRESSURE OF 150PSI@ 70°F. INCLUDES 1/2"Ø PURGE PIPING ABOVE AND BELOW EACH CHAMBER. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on ... moreyour entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Used Wire Basket. 48" x 60" x 29" Deep.
|
|
|
Used-Stainless Fabrication. Inc 250 Gallon 304 Stainless Steel Mix Tank, 38" diameter x 46' 3/4" straight side. Dish bottom, Open top with hinged Cover. Clamp on Lightnin Agitator with shaft and impeller. 1 1/2" Tri-Clamp Center Bottom Outet. Mounted on 3 Stainless steel Legs. ref# 45050007 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
American Lewa High Pressure HM2 LP/Propane Gas Compressor Pump USED. IN NICE CONDITION. THIS LP COMPRESSOR IS WORKING CONDITION. WAS IN GOOD WORKING CONDITION WHEN TAKEN OUT OF SERVICE. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# HM2 OVERALL DIMENSIONS: WIDTH: 28" LENGTH: 26" HEIGHT: 13" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ... moreALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER S
|
|
J. Little Mercer Co. Inc. C-1567 90 GAL BALL MILL REACTOR Model/serial no. MILL REACTOR S/N 87MX0839.1988 Manufacturer PATTERSON INDUSTRIES Dimensions 36"DIA. x 20" W/4" DISHED ENDS.O/A 45"X114"X93" Construction/configuration Carbon Steel Code/N.B. 35 PSI:Jkt:in JKT=100 PSI. SH= FV/100 PSI@ 400 DEG.F. Inlets/outlets(2)3"OUTLETS W/VALVES. 10"SP, SJI& SJO General data EXCELLENT CONDITION! APPROX. 90 GAL TOTAL VOL. W/VAC ARM Motor RELIANCE 10 HP. 1755 RPM Drive REEVES VARI-DRIVE 17.1 RATIO.OUTPUT=51.7 155 RPM Electrical data 230/460V. 3PH, 60HZ A PROCESSING unit that combines the Junctions of a ball mill and a reactor has been developed by Patterson Foundry& Machine. East Liverpool, Ohio. The Mil-Reactor mixes materials uniformly while they are ... morereacting, maintains desired heat transfer rates, and turns out product of the desired particle size, Patterson says. The Mil-Reactor comes with working capacities from 5 to 500 gallons. And internal pressure can be controlled from full vacuum to 50 p.s.i.g. The unit's heat transfer jacket can withstand up to 125 p.s.i.g. and can be used for either heating or cooling. Liquids, slurries, or gases can be added through access lines while the reactor is in operation, and vapor can be removed while solids are being dried. Among typical process operations Patterson says the Mil-Reactor can handle: Reaction between solids and gases. Handling of solids as slurries. Drying, reacting with gas, then reslurrying. Fine wet grinding. Unit is used but in good condition. Canadian customers need to supply there own Customs Broker contacts. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other
|
|
J LITTLE MERCER CO. 3 HP TORIT DUST COLLECTOR Stock Number: G-3250 Mfg. Torit Looks similar to a model 90. No id plate 3 Hp. 3450 rpm, 208-230/460v, 3ph blower motor Motor looks like it has been replaced. Foot pedal filter shaker. Approx. 895 to 1495 cfm based on similar Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does ... morenot have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
Haug PS-020-200 Static Eliminator Bar. 200mm Length PAYMENT: We accept Credit cards and PayPal Payments at checkout. We accept bank transfers only for purchases of high value.Unpaid item claims will be auto generated on day 4 by eBay. SHIPPING: We provide same day shipping on most orders(excluding weekends and holidays) Next Day and Second Day service is available for an additional fee. COMBINED SHIPPING DISCOUNT We always combine orders. If all items have been paid for and can be shipped in the same box. Split orders not paid for on the same business day, are not eligible for a combined shipping discount. GUARANTEE: We provide a 30 day guarantee on most items with a simplified return process through the eBay returns system. Please read our full terms prior to purchase. inkfrog terapeak. InkFrog ... moreAnalytics.
|
|
|
Scrap Sheer with 1 ft. blades. For use in cutting material. Machine is used but fully functional. Asking $2500; Shipping cost paid by buyer. Can be loaded in sea container. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e8f580c2b-0xf7-
|
|
|
Good working condition. This vertical machining center is being replaced with a new 2013 Mill. Manuals are available. The mill was used in a tool room and not production.
|
|
More than 85% off New price(cost $20.000 new) Free load out for pick-up. Shipping weight is 1.625 pounds. Delivery within 50 miles of 62002 for $50 You may arrange your own shipping or we will assist. Shipping to California is approx $500 The teeth on this unit are worn down only 1/2 inch. We will also accept a wire transfer to our bank account We also have a NEW unit the same size! item# 130881419814 Was used in a coal fired power plant as a clinker grinder. Specifications: Capacity(approx. 10 to 60 Tons per Hour(dependent on ash type and size) Input Particle Size(max. 3" x 8" x 18" Discharge particle Size(max. 1- ½" Internal Temp(max. 1200 ⁰ F(dry) or 200⁰(wet) Internal Pressure(max. 20 psi, Operating Speed, 18 RPM, Drive Horsepower, 5 HP, Standard Drive Mounting, ... moreIntegral Gear-motor Mounting Bracket, Weight(approx. 1.500 lbs(without drive) or 2,400(with drive) Flange-to-Flange Height, 16- ½" Inlet Opening, 27" x 19- ½" Discharge Opening, 19-½" x 16" Body Material, Primed Carbon Steel Side Liner- Body Armor(optional) Stainless Steel, Shaft Material, 17-4PH Stainless Steel, Shaft Sleeve Material, Stainless Steel with Hard Coating(replaceable) Cam Support Material, Primed Carbon Steel(standard) Cam Material, DURITE H(standard) DURITE H is 600 BHN Minimum] Anvil& Combing Plate Material, DURITE H(standard) DURITE H is 600 BHN Minimum] EXCEN-CRUSHER Clinker Grinders are specifically designed for both wet and dry bottom ash applications. Offering superior performance and high-level reliability. With decades of proven experience, UCC clinker grinders effectively reduce material size providing higher efficiency in pneumatic, hydraulic and mechanical bottom ash handling systems. With thousands of units in service. UCC EXCEN-CRUSHER Clinker Grinders are the industry standard for utility and industrial power plants across the world. Through continuous design improvement, the UCC EXCEN-CRUSHER offers efficient operation, superior sealing and longer servic
|
|
1 HP 30 GALLON CERAMIC PLASTER PUMP SYSTEM 1 HP 30 GALLON CERAMIC PLASTER PUMP SYSTEM MOTOR DATA DUTY: CONT. RPM: 1.700. VOLTAGE: 230/ 460- 200/ 400. AMPS: 3-8. PHASE: 3. OVERALL MEASUREMENTS: 30" x 28" x 47" TALL WEIGHT: 125 LBS COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please ... morecontact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don
|
|
|
This is an old cast iron kettle that is 2 1/2" tall. The handle is another 1" is 3 1/2" wide-handle to handle. Toy? It is not marked. It is in very good condition with some slight surface rust inside as you can see. UNIQUE! Thank-you for looking& God Bless! On May-11-13 at 20:38:14 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
|
|
|
THE PROCESS THIS LASER WAS RUNNING ENDED A SHORT TIME AFTER IT WAS IMPLEMENTED. AS A RESULT IT HAS A VERY SHORT RUN TIME AND THE OPERATIONAL CONDITION IS PERFECT. S/N: 9050434 PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE ECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS LASER WILL BE PACKAGED IN A QUALITY FOAM LINED WOODEN CRATE AND SHIPPED VIA FEDEX GROUND OR INTERNATIONAL ECONOMY SERVICES(UNLESS BUYER REQUESTS OTHERWISE) BUYER PAYS ACTUAL SHIPPING COSTS. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
|
New London Engineering Recycling Conveyer Model 505-24-12 Serial No 96-40590 24" x 12'
|
|
Lot of 6 Watlow Thinband Heater Band STB12N6AT-5 Watlow Thinband STB12N6AT-5 V240 W5000 0636 All six Items are in good condition. Purchased from a government surplus auction. Appear to have been used very little, if at all. Includes six(6) Watlow Thinband heater bands ONLY. WE COMBINE SHIPPING IF POSSIBLE. LOCAL PICK UP IS ALWAYS WELCOMED PAYMENTS ARE DUE WITHIN 3 DAYS(72)HOURS. PLEASE MAKE PAYMENTS WITHIN THIS TIME. OR CONTACT US IF THERE IS A PROBLEM. WE DO OUR BEST TO LIST ITEMS AS WE SEE THEM. TEST THEM OR HEAR THEM.WE ARE LIQUIDATORS, AND DO NOT HAVE EXTENSIVE KNOWLEDGE OF EVERYTHING WE SELL. INFORMATION IS GIVEN AS TO WHAT WE KNOW OR SEE. TO HELP IN YOUR DETERMINATION OF PURCHASE. PLEASE REVIEW DESCRIPTION AND PHOTOS AS TO CONDITION OF ITEMS AND/OR WHAT IS INCLUDED WITH ITEM. RETURNS ... moreARE ACCEPTED FOR MISREPRESENTED ITEMS ONLY. PLEASE CHECK OUR OTHER AUCTIONS. AS THERE ARE MANY LISTED.
|
|
|
Manufacturer: Aero-Motive Balancer Model: EB60S00. Year: 2006 Capacity: 20.4-27.2 KG. Lbs: 45-60. Shelf I.D. 16.
|
|
|
Great machine. Canopy. Auxilliary hydraulics, solid tires. 1142 hours. s/n T00317A127763. Item#K183913 Call Tim/Linda 888-233-9678 Sales tax is collected in PA CA NY and FL. Sellebrity Analytics.
|
|
|
Inventory# SD2204 Basket Size: 18" x 18" 1/16" perf.
|
|
|
Inventory# SD2202 Basket Size: 18" x 18" 1/8" perf.
|
|
|
Inventory# SD2201 Basket Size: 18" x 18" Fine perf.
|
|
|
Inventory# SD2173 Basket Size: 12" x 12" 1/32" perf. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13edaae0d09-0xfe-
|
|
|
Inventory# SD2183 Basket Size: 12" x 12" 1/32" perf.
|
|
|
Ogden 1300 W infrared heater with two A-1-650 elements. 220/230 V. 4" x 3" x 20"
|
|
|
Purchased from a local university. Guaranteed working. Buyer to pay $149 for freighted shipping. 1 30 liter tank.with 2 Balzers EVC 110M controls on top Approximate Dimensions: 16" Dia. 29" High.
|
|
PRESSURE TANK INFORMATION: YEAR: 2004 155 PSI MAWP AT 100 DEGREE F. DIV.1 MDMT(20 DEGREE F AT 155PSI) SERIAL: 119629-006. 316L MAWP 10.7 BAR 38 DEGREE C. GAGE/GUAGE INFORMATION: BRAND NEW! SPEC: 163282. 2-1/2 PSOSA. 200PSI. 1/4 NPT LM. Please disregard the number and letter in parenthesis in our titles it is for office use. BE SURE TO CHECK OUR MANY ITEMS IN OUR STORE AS WE HAVE LOWERED PRICES ON THE MAJORITY OF ITEMS IN OUR STORE. WE DO COMBINE ON SHIPPING AS WELL. PLEASE EMAIL US WHEN YOU ARE READY FOR YOUR TOTAL SO WE CAN DISCOUNT YOUR SHIPPING. Please be sure to look at our other auctions as we do combine on shipping. If you are bidding on more than 1 auction please wait until all of them for that week are over so we can send you a combined invoice to save you on shipping. Thanks! Check ... moreout my other items! Be sure to add me to your favorites list! Shipping Price listed is based on delivery within the Continental US only. Alaska. Hawaii, and Puerto Rico as well as international buyers should contact us for shipping quote. RETURNS: If we make a mistake with info in the auction or say something works and then it doesnt etc then we will take full responsibility in a refund but just to return something because you ordered the wrong thing or bought the wrong part number or did not know if something is outdated we will not accept a return. I just got a negative because an item we had in our store was obsolete but had the part number on it. We assume the buyer knows what he is buying or needs and any items that no longer are being made are often purchased on ebay as a last resort to find obsolete items.
|
|
perfect for bright annealing and silver and gold soldering. This units at 9 feet. 4 inches long and 18 inches wide, fits in spaces where a larger unit simply can't go. With a heat treating capacity of 0 to 10 inches per minute through an opening 2 inches high over belt. The maximum operating temperature is 1800 Degrees Fahrenheit. It runs on a 220 volt, 3-phase motor. With a Bodine Minarik electronically controlled speed of 0 to 10 per minute, the unit runs smoothly so as not to disturb the work while passing through the furnace. There are two(2) Honeywell 3000 Micro-processor Controls calibrated for Type(K) Thermocouples. These instruments offer state-of-the-art Micro Computer Design. 4 digit seven sequent digital display, selectable display of process temperature, set-point temperature ... moreor control adjustments, L.E.D. Deviation indicator, field selectable display in degrees Fahrenheit or Celsius. Adjustable proportion band and cycle rate for precise temperature control. The heating chamber of the heat treating furnace is 24 inches long. And heated by Nichrome heating elements with a low watt density for long life, backed by 2-l/2 inches of Johns-Manville insulating brick and 3 inches of Johns-Manville Superex for efficient insulating conditions. There is a purging chamber that will be 7 inches long, fitted with blanchard ground Meehanite casting and door to maintain an atmosphere tight seal around sides and top of door. There is also be an atmosphere fiberglass curtain box to guard against draft at the exit. The cooler of the heat treating furnace. Will be an integral part with the high nickel alloy muffle which has a water surrounding the tunnel. Cooling section will be 3l inches long made of stainless steel. This machine is located in Colorado ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f0047319e-0x104-
|
|
|
Used stainless steel rectangular solution tank w/ bolt on cover. 304 ss. 1.5” NPT top side inlet and 1.5” NPT bottom side outlet. Approx. dimensions: 30”W x 24”D x 36”H
|
|
|
USED 5.500 GALLON 316 STAINLESS STEEL MIX TANK, 10'DIA. X 10'HIGH, FLAT TOP, SIDE MANWAY, FLAT BOTTOM. 1.5 H. P. MIXER WITH AXIAL TURBINE MIXER BLADES. NOTE: BUYER PAYS FOR REMOVAL AND LOADING.
|
|
|
Sonobond Model LM920 Ultrasonic Sewing Machines. 1997, Serial number SHZ31. This machine was used sparingly and for a very short period. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f1a24ac80-0xfb-
|
|
|
This machine was built in 1987. It was last used in a biscuit factory, it runs on 480 volts. We ship worldwide at cost to buyer.
|
|
|
one) Sanitary tee. Tri Clover type, 2" used. $10 shipping in the continental U.S. D-10088 If you have any questions. Please email me! Happy bidding! Click to View Image Album Shipping& Handling US Shipping. $10.00 UPS Ground International Shipping. $65.00 USPS Priority Mail International FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
A self-study course by Dr. J. Stuart Hunter on 5 VHS Tapes(Copyright 1975. Westinghouse Learning Corporation) This is a self–study course that was developed by Westinghouse Learning Corporation as an adjunct to Dr. J. Stuart Hunter’s filmed lectures. It consists of 5 cassettes illustrating the 10 Course Program and Topics. Learn and understand the fundamental of statistics at your own pace. Also included is the book“Introduction to Business Statistics” This material is GREAT FOR HIGH SCHOOL& COLLEGE STUDENTS STUDYING THE FUNDAMENTALS OF STATISTICS. The categories are: 1. Concepts and Vocabulary 2. Describing Collections of Data 3. Getting Information from Data 4. Collecting Data Efficiently 5. Charting 6. Forecasting 7. Deciding Between Two Alternatives 8. Estimating the Cost of Uncertainty ... more9. Relating Two Variables 10. Relating Many Variables. The course also comes with a Study Guide. Note: The material condition of this course is very good. The science of statistics presented here is excellent and academic. 1 Title: INTRODUCTION TO BUSINESS STATISTICS Author: G. Hadley Published: 1968 Publisher: HOLDEN-DAY Subject: Business statistics Topic: Intended as a one semester course in business statistics. Mathematical level is elementary; no calculus but touches on probability theory and a simple stock model is included. A separate character in quality control is also included. Condition: This book has been read but is in very good condition. There is slight edge-cover wear. Binding is tight! Hardcover is light blue with gold lettering and design spine. No obvious damage to the hardcover. No missing or damaged pages. No creases or tears. There is some underlining text or writing in the margins. There is a black mark on the inside of the first cover page as well as the last cover page. There is no jacket.
|
|
Ingersoll Rand Compressor SSR-HXP20SE Model 20 H.P 53CFM 200 PSIG 200V Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Thank you for visiting mister-surplus. We sell both new and used items. Most are surplus items previously used by private companies. Government institutions and agencies. Customer satisfaction is our#1 priority. Up for sell is used Ingersoll Rand Compressor SSR-HXP20SE Model with 20 H.P 53CFM 200 PSIG 200V This is a Government surplus. I was told it's been working with no problem since retired. We don't have any resources or knowledge to test this unit at this time therefore. We are selling it AS IS. Please notice we can not guarantee the functionality of the unit. This might be good for parts or repair. S/N: KE6897U99146 This is could be a great ... moredeal for some lucky bidder! Comes exactly as pictured. We do our best to describe all items to the best of our ability. Please do not assume that accessories or the condition is other than described in the description. Any questions please feel free to ask. Please see photos and Policy for more details. Please see other items for other great deals. LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! Our business located at 827 N Rengstorff Ave. Mountain View, CA 94043 24 hours notice is required prior to pick up. Payment: Paypal* Visa. MasterCard, American Express, Discover* Santa Clara County sales tax will be applied if you are a California resident. Terms: All shipping costs are non-refundable for any circumstances. Buyer pays all freight costs for returning the product(s) All returned items must be the same condition as shipped in order to receive a refunds. 20% restocking fee applies to all returns. Returns(RMA) If you have an issue with your item once it is received. Please email through eBay and we will try our best to help resolve the problem. If your item is in need of a replacement. Repair, refund or exchange, please email through eBay for instructions. Contact: Please send us a message through eBay if you have
|
|
Quote# 26826. Quote# 26826. 15H HILL-ACME HYDRAULIC ALLIGATOR SHEAR Serial No. 8115-364-02. Model 15H EQUIPPED WITH: Adjustable Stroke For Faster Cutting Cycle Self Contained Hydraulics& Electrics CATALOGUE SPECIFICATIONS: Round Bar Capacity. 2-1/2" Plate Capacity. 15" x 1/2" Rebar Capacity. Three Bars. 11 Knife Length. 15" Knife Width. 4" Knife Thickness. 1-1/4" Knife Opening. Maximum. 6-3/4" Height Of Cutting Edge. 30" Strokes Per Minute. Full Cut. 12 SPM Strokes Per Minute At 3" 22 SPM Motor Horsepower. 20 HP Electrical System. 230/3/60 Floor Space Required. L x W. 6'4" x 2'10" Weight. Approximate. 6300 LBS NOTE: Machine Appears To Be In Good Condition With A Replacement Price Of Over $45.000.00 PRICE: F.O.B. OUR WAREHOUSE. ... more$19.500.00. All lmachines/equipment subject to prior sell.
|
|
|
Reliance Electric 250 HP D.C. Motor Frame Number: 507ATZ This DC Motor was never put back into service after being fully rebuilt by Lewis Electric Motor Repair. We have all supporting rebuild documentation from Lewis Electric Motor Repair on file- Listing Includes Picture of Nameplate- We try to represent the items we sell as honestly as possible and include plenty of detailed pictures. If you buy from us we will do our utmost to make sure that you are completely satisfied. Anything bought from RCI comes with a 30 day warranty. If you need additional photos. They can be sent to you upon request. If you have any questions, I will do my best to answer them. Unit includes ONLY what is shown in picture(s) above unless otherwise noted. Our business has been in operation for over 2 5 years.
|
|
J LITTLE MERCER CO. 3 HP DUST HOG PORTABLE DUST COLLECTOR Stock Number: G-3344 Cartridge type. 2) cartridge 3 Hp blower. 208-230/460v, 3ph 8 inch top inlet o/a 5 ft. x 30 inch x 5 ft. tall on wheels Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full ... morebefore shipping.
|
|
ITEM# 11873 USED KICE INDUSTRIES 18"Ø LEFT-HAND CYCLONE- MODEL CE-18 ALL HEAVY DUTY WELDED CARBON STEEL CONSTRUCTION. 6"Ø SLEEVED INLET, 5" FLANGED DISCHARGE, 8"Ø STEEL OUTLET FITTING WITH 4" TEE BRANCH CONNECTION. OVERALL HEIGHT: 38" ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process ... moreyour payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Selling a Power Blast 24D13 Roadabrator Portable Shot Blast Machine. Powered by a 1998? Model John Deere 855 Compact Diesel Engine Tractor. 24 HP with Low Hours. Rebound Abrasive Reclaim. Hydrostic Drive, Hydraulic Blast Head Lift, Onboard Dust Collector, 13' Blasting Width, Totally Self Contained.
|
|
Click To Enlarge- Used- Tank. Stainless Steel, 15 Gallon. 19" Diameter x 12" straight side, dished top and bottom. Openings: top(1) 10-3/4" with bolt-on cover and spray ball, 1) 1-1/4" 1) 1-3/4" side(2) 1-3/4" bottom(4) 1-1/4" side bottom outlets. Mounted on 4 stainless steel legs welded to a stainless steel skid. ref# 78511. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight ... morecarrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
Cyclone You are bidding on one Boedecker Company 22" Diameter Stainless Steel Cyclone. Model No. 22" Dia. Cyclone Product No. 3470 Mark No. 0506 Equipment No. 101 Drawing No. B10060-GA-101 Diameter of the bottom hole: 10" Overall height of the unit: 30" Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence or a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves or we can provide a competitive quote to the buyer. Shipping weight 250 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be ... moreallowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and businesses. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
ITEM# 11868 USED WARREN RUPP SANDPIPER DOUBLE DIAPHRAGM PUMP- MODEL SB1.SB4A WITH TRANQUILIZER SURGE SUPRESSOR. CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please ... morebe aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 11923 SEW-EURODRIVE 2.0 HP GEARMOTOR 34.73:1 RATIO. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check ... morehas cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f9275529a-0xf3-
|
|
ARO Corporation Pneumatic Double Diaphragm Pump w/ Shamrock Reservoir Tank USED PUMP AND TANK ASSEMBLY. PNEUMATIC DOUBLE DIAPHRAGM PUMP DOES NOT HAVE A DATA TAG. SO WE ARE UNABLE TO DISCERN THE WORKING PARAMETERS FOR THIS ITEM. COMES WITH A TANK WITH A FLOAT GAUGE. COMES ON A ROLLING CART. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# NA OVERALL DIMENSIONS: WIDTH: 38" LENGTH: 30" HEIGHT: 50" SHIPPING WEIGHT: 276 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: ... moreWILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE
|
|
|
stainless steel 500 gallon bin. 42"X 48" X 56" high. Hoover Universal. DOT57. Design 9.5 PSIG. SN 29911. Rated gross 6680 lbs. Item 12008-020 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
System is designed to count and bag bulk product. the system delivers this product to the bagging machine from two vibratory feeders. this control system is specifically designed to control the hopper and vibratory feeder portion of the machine. Bagging machine operations are not directly controlled by this system. Bagging machine not included. A hopper is used to hold large amounts of bulk product. this product is delivered to bowl feeders. As required, over an extended period of time. the operator selects the amount of product to be deposited into the bag from each vibratory feeder. this selection is done by using the operator interface located on the main panel of this control system. an entry of 0 disables the feeder. when the preset amount of product has been delivered from each feeder, ... morethe bagger machine is signaled to cycle by this control system. Shipping will be 350.00 to the continental USA. Shipping to a terminal or business address only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f9ff80cc8-0x101-
|
|
|
lightning drive 2 hp vector model 50220 Item 12008-005 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
|
Presto Walk Behind pallet stacker. Electric lift. Manual drive. Model No. PSA262. Capacity 1000 lbs. Load Center 24 inch. S/N V030380-100-01. 11896-005 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
|
Brand: Dwyer Condition: Used Model: 2004C Type: Pressure Calibration(Min-Max) 0-4 IN-H2O Face Size: 4 IN Fitting Size: 1/8 IN Weight: 1 lbs Dimensions: 5 X 5 X 3 SKU: B216921 Category: Instrumentation· Gauges Additional Notes:
|
|
Click To Enlarge- USED: Alfa-Laval SB-400 16" pusher centrifuge. 316 stainless steel construction. Single stage, approximate 15 hp main drive and approximate 15 hp hydraulic pusher motor. Unit includes feed pipe and inspection door. ref# 61653. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We ... moreaccept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13fb1ef05c5-0x103-
|
|
|
50HP 1770 RPM 364T FRAME 230/460 PERFECT CONDTION SHIPS TODAY MIKE 216-374-7262 Please visit us online at www.GreatLakesOhio.com Qué se necesita para hablar con alguien Emmanuel Morales 216 244 0550
|
|
Description Excellent used Syntron Electric Controller w/ Magnetic Feeder FMC Syntron Controller Model CSCR-18-1 Volt 115 Hz. 50/60 Amps 5.0 Magnetic Feeder Model F-010-B Volts 115. Hz. 60, Amps 2.0 Tested Works Great No tray on feeder. Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within ... morethe USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are
|
|
THIS IS A FUNCTIONAL Q-SWITCHED ROFIN MARKING SYSTEM. THE LENSE WAS COVERED WHILE IN STORAGE AND ONLY UNCOVERED FOR THE PURPOSE OF PHOTOING. PLEASE REFER TO THE PHOTOS FOR ADDITIONAL INFORMATION/ SPEC'S. DUE TO THE COMPLEX AND SENSITIVE NATURE OF THIS ITEM IT IS BEING SOLD AS-IS. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE ECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE PACKED IN A(QUALITY) PADDED WOODEN CRATE AND SHIPPED AS(INSURED) FREIGHT. BUYER PAYS ACTUAL CRATING/ SHIPPING COST. OTHERWISE. ON-SITE BUYER PICK UP CAN BE ARRANGED. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITIHN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, ... moreBANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE*
|
|
|
Brand: Crepaco- Approx. 200 gal. single shell-304 ss dome top. Shallow cone bottom tank. Manway. Vent, 1.5” threaded CIP ball connection, 3” threaded fitting. Lightnin.65 HP/1725 RPM mixer. One(1) 4” threaded center outlet. Tank mounted on a hanging. Three legged stainless weight measuring steel frame. Approx. dimensions: 48” dia. x 28” straight side x 10’OAH-Approx weight 700lbs- Will ship using Yellow Freight. Our long time partner who ships for much cheaper than conventional freight services. Or if you have a shipping preference, let us know.
|
|
BARON-BLAKESLEE M-LINE SERIES 55-gallon capacity unit. PRECISION VAPOR DEGREASERS Solvent Recovery Stills: Environmentally Friendly Solvent Recovery Stills are designed to extend the solvent life and purity by reducing contamination levels. The MRR-LE Solvent Recovery Stills provide high capacity. Efficient, continuous or batch distillation of solvents used in our vapor degreasers. MODEL: MRR10LE Left to Right 42” Front to Rear 36” OverallDimensions(inches) High 84” Distillate Rate(GPH) 10 Solvent Capacity(Gal) 55 KW 3 Heat Input Voltage 440/3/60 Pipe Size 1” Solvent Outlet Above Floor 70” Refrigeration Unit 1HP Shipping Weight(U.S. lbs. 800 IMPORTANT GUIDELINES FOR VAPOR DEGREASING. 1) No drafts at entrance and exit of equipment. DRAFTS = SOLVENT LOSS. 2) The equipment should be up to temperature(condensation ... moreof heated solvent at. Condensing coils) before processing any work. 3) Speed of travel for work entering. Leaving, or while in vapor zone is 11 feet per. Minute maximum. The main reasons are minimization of solvent drag-out losses. And cleaner parts. 4) If spray is required. Only spray in the vapor zone. 5) Parts should be racked so that solvent drains off readily and does not collect in. Recessed areas. Parts can trap solvent and bring solvent vapors out of the. Degreaser. Creating a possible health hazard and undesired solvent losses. 6) Never lift part(s) above vapor zone when transferring from one sump to another. 7) Never let liquid level get below top of heat source. Keep an adequate supply of. Solvent on hand. The equipment should always be filled to proper operating. Levels. 8) Size and type of load to be processed can be critical to efficient operation of the. Degreaser. If vapor line lowers rapidly and requires extra time to recover. The. Load is too great for the machine and should be reduced to the machine’s design. Limits. 9) Machine maintenance: A clean-out schedule should be established for the. Removal of contamination(sludge) from the boil sump(s) at regular intervals to. E
|
|
Quickdraft System for Materials Processing Exact Model Unknown, Good Condition, Bend in Top Flange/Easily Repaired(See Photos) 2 Available(1 w/ damaged flange- 1 w/o damage) Bid is for 1 Quickdraft System. If you would like both please make sure change quantity when you bid. If you have questions. Please contact us and we'll do our best to respond in a timely manner. Motor Info- Make: Reliance Electric, Phase: 3, HP: 7.5HP, Volts: 230/460, Hz: 60, RPM: 3505, Frame: 213T, Ship Weight: 370lbs, Note: Due to the size and/or weight this item must ship via truck freight. If you require a price quote please use the contact seller button and include your full address including street and number. City, state and zip code. Please read our Terms of Sale Carefully Payment We prefer payment with Paypal ... morefor all auctions. Please contact us to discuss other options if you can not use Paypal. Payment must be made within 3 days of Auction close. Please contact us to make arrangements if you are unable to make a payment on time. Shipping We use UPS Ground shipping unless otherwise noted. Occasionally we offer various shipping methods. When shipping outside the USA we use UPS Worldwide Expedited. Shipping to Canada may sometimes use UPS Worldwide Standard. If you require faster service such as overnight. Second day, etc, please contact us with your City, Country, and Postal Code for a price quote. Contact Please contact us through the"Ask Seller About This Item" link. Terms of Sale Items are described based on our knowledge of the product listed. We are unable to test or otherwise verify the working condition of items in our warehouses. Unless otherwise noted all items are assumed in good working order. We make every effort to give a fair and accurate accounting of each item in the listing description. Bidders are encouraged to ask questions if they require specifics or clarification of an item description. All sales are final unless an item was not as described based on our knowledge of the product. If an item is to b
|
|
Meyer Rotary Airlock Blower Package Model: 430-D-648, Size: 10X10-SD, Serial: 158575-01A, Ship Weight: 470lbs, Package includes Windsmith 917 Speed Reducer/Gear Reducer, 1/4(25) HP Motor, Note: Due to the size and/or weight this item must ship via truck freight. If you require a price quote please use the contact seller button and include your full address including street and number. City, state and zip code. By Bidding You State You Agree With The Terms of Sale. Read Carefully. Payment We prefer payment with Paypal for all auctions. Please contact us to discuss other options if you can not use Paypal. Payment must be made within 3 days of Auction close. Please contact us to make arrangements if you are unable to make a payment on time. Shipping We use UPS Ground shipping unless otherwise ... morenoted. Occasionally we offer various shipping methods. When shipping outside the USA we use UPS Worldwide Expedited. Shipping to Canada may sometimes use UPS Worldwide Standard. If you require faster service such as overnight. Second day, etc, please contact us with your City, Country, and Postal Code for a price quote. Contact Please contact us through the"Ask Seller About This Item" link. Terms of Sale Items are described based on our knowledge of the product listed. We are unable to test or otherwise verify the working condition of items in our warehouses. Unless otherwise noted all items are assumed in good working order. We make every effort to give a fair and accurate accounting of each item in the listing description. Bidders are encouraged to ask questions if they require specifics or clarification of an item description. All sales are final unless an item was not as described based on our knowledge of the product. If an item is to be returned. Buyer is responsible for return shipping.Shipping is not refundable. 20% Restocking Fee. ISSK470 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 30" Dezurik Butterfly valve. Valve was bought. Installed, but never put into service due to the wrong type of disc. My loss is somebody else's gain. This auction is for only one of the 30" valves pictured.
|
|
YOU ARE LOOKING AT A Lot of 3 1" Stainless Steel Sanitary Pressure Clamps. Items are in 100% working condition. Please feel free to contact us with any questions. 07-AF000ED CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility ... moreto verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the date you receive the item or items to test& notify us if it is not working. However, some items are sold“AS IS” First. We will offer to repair or replace your item with another item as close to the original description
|
|
Click To Enlarge- Used- Dalton Company Vibrating Screener. Model 402, 304 Stainless Steel. Apprixmate 14” diameter, double deck, 3 separation with top cover. Driven by a 0.4kw, 3/60/220 volt, 3440 rpm motor. Includes a feed hopper, and control panel. Mounted on a carbon steel base. Serial# 42906A, built 2011. ref# 44961005 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other ... moredisposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
KEYENCE SEPERATE AMPLIFIER TYPE PRESSURE SENSOR AP-40A Search KEYENCE SEPERATE AMPLIFIER TYPE PRESSURE SENSOR USED CONDITION AP-40A SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA QZ 113 SW 1 MMH 7/17/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience ... morethis may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the description. Please take the following into consideration. The color of the photo may vary from the actual product due to translation and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing, the information is only intended as a resource for additional information, not as an exact representation of the item. If a situation arises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the item.
|
|
Click To Enlarge- Used- Graco Mixing System consisting of: 1) Graco tank. 45 gallon, 304 stainless steel. 24” Diameter x 19.5” straight side, open top with a 1/3 hinged clamp down cover, dished bottom. Approximate 3/4” center bottom outlet. Mounted on 4 stainless steel legs. 1) Off center top entering Lightnin agitator, model EV5L33. 3/4" Diameter 316 stainless steel shaft with a 6” diameter 316 stainless steel 3 blade turbine, driven by a 1/3 hp, 3/60/230/460 volt, 1725 rpm XP motor. 1) Waukesha positive displacement pump, model 030U2AP, 316 stainless steel. 1-1/2” Tri-clamp inlet/outlet, 2) stainless steel rotors. Driven by a 2 hp, 3/60/230/460 volt, 1740 rpm XP gear motor, ratio 10 to 1. Includes a carbon steel mounting base. ref# 43586002 Contact Information Steven Cohen Aaron Equipment ... moreCompany 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
GREAT CONDITION KICE BIN VENT W/ 12 SOCKS 4' LONG If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model is being offered as is and ready to ship to y ou. Please ask about international shipp ing. C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What makes our equipment better than the rest? We use only the finest materials and parts in our equipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive ... moreproducts on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
10.300 gallon stainless steel vertical tank. Flat top and bottom. 12' 4"diameter X 148' straight side. Side entering propeller agitator, belt driven, with motor. Side and top 18" diameter manway. Top 1- 2" Hc, 12" vent and spray ball for cleaning. Item 11861-008 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. ... morePlease ask all questions prior to bidding.
|
|
|
Manufacturer: Siemens Model: 3TF54. 260A 600V AC. 3 Amp Pole. I.D. Shelf 4
|
|
|
USED CHERRY BURREL 150 GALLON CAPACITY STAINLESS STEEL JACKETED TANK FOR SALE WITH LIGHTNIN MIXER. LADDER, AND MULTI CIRCUITED JACKETED SIDE WALL. THE TANK WAS USED TO STORED SORBITOL. AND KEEP IT AT APPROX 125 DEGREE S F TO MAINTAIN FLUIDNESS. I WILL LOOK FOR THE ORIGINAL BUILD SHEET INFORMATION. BUT I AM SURE STILL AVAILABLE FROM CHERRY BURREL SHIPPING UP TO WINNING BIDDER. I HAVE USED USHIP FOR ITEMS LIKE THIS WITH GREAT SUCCESS IN THE PAST. ITEM IS LOCATED IN AVENEL NEW JERSEY FOR PICKUP BY WINNING BIDDER OR TRUCK. AN EXTRA CHARGE TO PALLETIZE OR CRATE IF REQUIRED BY CARRIER.
|
|
Grieve Inert Atmosphere Oven Model AA-850 Inside oven dimensions are 24in x 24in x 24in This item is being sold"as is" All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes Metric Services with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of Metric Services, be added to the quoted purchase price and invoiced by Metric Services to Purchaser. The failure of Metric Services to invoice ... moresuch taxes does not excuse the Purchaser from responsibility for paying necessary taxes. All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by Metric Services and Purchaser in writing. Smaller machinery or equipment will be sold with FOB terms with the Purchaser only being responsible for freight charges. A qualified rigger with liability insurance must perform all removal of machinery or equipment when terms are not FOB. No Purchaser will be allowed to load their own machinery or equipment unless proof of insurance is submitted prior and all other factory requirements are met. Loading dock hours are 9:00a.m.2:00p.m. Monday-Friday. Unless specifically stated in writing by Metric Services, all freight carriers must use flat bed truck only. Some skidding and crating of machinery or equipment can be performed by Metric Services for an additional fee. Upon reasonable notice to Metric Services. Purchaser shall have the right to inspect the equipment prior to shipment. Purchaser agrees that its acceptance of the machinery or equipment tendered shall constitute an acknowledgement by Purchaser that such machinery or equipment satisfies any and all obligations by Metric Services. Purchaser
|
|
M& M TURN TABLE SPECS; DIAMETER(24.75" OA HEIGHT(12" MOTOR SPECS; LEESON. DC, 3/4 HP, 90V MODEL; 200-25-25-LE CAME OFF A MAZAK POWER CENTER V15C PLEASE CONTACT US ABOUT RIGGING SERVICES BEFORE BIDDING Terms and Conditions: All bidders are responsible to determine the age. Description, condition, and authenticity of all Purchased items. This machine has not been tested under power by any of our employees or our company affiliates. Each item is auctioned“AS IS, WHERE IS, with all faults” in its condition at the time of sale, without any warranties or guarantees, either expressed or implied, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, POSSESSION, QUIET ENJOYMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, and without recourse by way of refund, reduction of the Purchase ... morePrice, or otherwise. Taxes are applicable to all purchases unless an exempt form or re-sale certificate is emailed/faxed to us. Shipping and Handling: Bidders are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure its safe delivery. Seller and Buyer have the option to allow the Buyer to choose it's own rigging company for item removal. But Seller has final say to selecting rigging personnel for the item removal. Please send us a message with your zip code to get an estimate quote for transport! If you have your own method of transport. Let us know before payment! We Ship Worldwide!
|
|
ITEM# 12004 USED 35'4" DISCHARGE HT. HEAVY-DUTY STAINLESS STEEL BUCKET ELEVATOR MADE BY DOYLE EQUIPMENT MANUFACTURING CO. 35-4" DISCHARGE HEIGHT. 14"W X 30"L HOUSING, 6" X 9" PLASTIC BUCKETS MOUNTED ON RUBBER BELT. INCLUDES MAINTENANCE ACCESS PLATFORM. POWERED BY A 5.0 HP, 1745RPM, 230/460V, 3PH, 60HZ MOTOR THROUGH A BROWNING SHAFT MOUNT GEAR REDUCER WITH 14.0 RATIO. DESIGN E. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer ... moreand be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|