|
|
Order by: |
Buy It Now
Free Shipping
Condition: Used Location: Twin Lake, United States
Antique Inboard Boat Motor Hit Miss Marine Engine Detroit Engine Works 2 Stroke 2 HP? Has not been tested for restoration, has compression, see pictures. For local pickup located in West Michigan 49457 approximately 200 miles from Chicago and Detroit. Can drop off at a local UPS store if you pay for and arrange shipping. Check out my other items!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Used on lots of antique engines, these are nice new reproduction Mica washers for igniter's. Made to the highest of standards these will provide you with many years of trouble free service!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: IH M gasket set 1.5hp Ignitor. Both 1 and 3 needle carbs. Includes, head gasket, carb gaskets and breather gasket. Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Our decals are MADE IN THE USA with a high quality material to withstand many years of being on your engine.
0 bids Free Shipping
Condition: Used Location: Orient, United States
Magneto Bracket for2 1/2HP - 5HP Fuller Johnson. For use on a 2 1/2 - 5HP Fuller Johnson throttle or hit miss engine. 2 bolt mag that mounts 2" apart on center. Throttle Governed or Hit Miss Gas Engine.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This is a 7/8 threaded spark plug that is used on a lot of old hit and miss engines and various other applications. This is a very nice high quality spark plug at a very reasonable price.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Would look great on your restoration project!
Buy It Now
$3.00 Shipping
Condition: Used Location: Escondido, United States
A gently read, used condition, copy of the magazine Gas Engine Magazine from November 1991. See picture #2 for page showing contents of this issue.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
0 bids Free Shipping
Condition: For parts or not working Location: Long Beach, United States
Maytag Engine Model 92 Motor Single Hit Miss Read Description. Antique Maytag hit miss engine. Appears to be complete and in ok condition. It does not turn over with the pedal or if you gently turn the flywheel. It was a project of my late father. Please see pics and ask any questions. Thanks.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This way you can buy 3 rings or 4 either way.
Buy It Now
Free Shipping
Condition: Used Location: Orient, United States
The S.M. Jones Co. Manufacturers of. Gas & Gasoline Engines - Toledo, OH USA. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. I apologize for any inconvenience. Condition: Good - Due to age this item is being sold "AS IS".
0 bids $17.08 Shipping
Condition: Used Location: , Canada
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
If you want to dress your engine up and if your engine doesn't have a little ball oiler in this place you add this and add a nice touch of brass to your engine.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Condition: Reprint Description: This is a reprint from an original little Multi Motor Booklet. A really neat small booklet that covers the Maytag model 92 engine. It is 8 pages of information such as a cut away view as seen in the picures, operating instructions and suggestions for the Multi motor. A nice read and a great piece to add to your collection. Measures 6in by 4in.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
There is alot of info here that will also apply to the model 72, Twin engine. Includes a section on what to look for when buying an engine. This is a very complete set! With hours of video in an easy to watch format you will NOT be disapointed!
Buy It Now
$6.50 Shipping
Condition: New – Open box Location: Millersburg, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These magnets have been made for Lightning Magneto for many years and are tried and tested. Brought to you by the largest most trusted dealer specializing in John Deere stationary engine parts. No one has more parts for John Deere Engines hit and miss engines than Lightning Magneto!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Will fit lots of other engines as well and works great on many models. A really nice muffler and super nice quality!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
It is made to specs of the original wire. This is a very nice wire. Part: 4 feet of 7mm yellow pattern plug wire with ring end. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need!
Buy It Now
$40.00 Shipping
Condition: For parts or not working Location: Kingston, United States
Sold as is see all pictures for condition not tested for parts or Repair spins over freely
0 bids Free Shipping
Condition: Used Location: Lees Summit, United States
See all photos for size. You could use it for just about any small engine though.
0 bids $21.35 Shipping
Condition: Used Location: , Canada
0 bids Free Shipping
Condition: Used Location: Orient, United States
Low Tension Ignition Coil Hit Miss Gas Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. (not for use with a spark plug). If you decide you don't want it or find another one cheaper, I won't take it back.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are precision made to repair your engines check valve.
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. (not for use with a spark plug). If you decide you don't want it or find another one cheaper, I won't take it back.
Buy It Now
Free Shipping
Condition: New Location: Centralia, United States
All brass with stainless steel screen and stainless balls.
Buy It Now
$2.00 Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: Used Location: Orient, United States
Fits a 1 1/2 hp Novo. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. I apologize for any inconvenience. Condition:Due to age this item is being sold "AS IS". All the images are original scans of the actual item being sold.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This is a genuine gas engine oiler complete with the fill plug. The size is #1 1/2. This is a 1.5 ounce capacity. This is truly a high quality Made in the USA part.
0 bids Free Shipping
Condition: Seller refurbished Location: Lincoln, United States
For sale I have a 1935 Maytag engine #640437.Engine was taken apart wire brushed and bead blasted. Cylinder head was honed with new rings. Carburetor was cleaned with new air valve and seat with spring . Engine starts and runs good Engine has new decals and is ready to show.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Used in the Wico AH mag and on the International LA/LB engine. A great way to get your engine back up and running as good as new!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are precision made to repair your engines check valve.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Cushman R-20, Cub, 3hp, 3 rings (2 compression rings, 1 oil ring). This way you can buy 3 rings or 4 either way. This list is for reference purposes only and may have errors. We do our best, but there is always going to be an odd ball engine that needs a differnt size ring than what we have listed.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are precision made to repair your engines check valve.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: 3 1/2 x 3/16 Piston Oil Ring #460. This way you can buy 3 rings or 4 either way. This list is for reference purposes only and may have errors. We do our best, but there is always going to be an odd ball engine that needs a differnt size ring than what we have listed.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are precision made to repair your engines check valve.
0 bids Free Shipping
Condition: Used Location: Orient, United States
WICO Igniter Type "L1" Magneto. WICO Type L1. Mag is in good condition and ready to use. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. Spark timing adjuster. 4 bolt mount pattern 4 5/8" x 3 1/4" - studs look good.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
These are a direct fit for the larger cover. Great parts!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Fits both the single and twin cylinder engines.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Made just like the old ones. This little guy holds the ratchet guard on by the started ratchet.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Would look great on your restoration project!
Buy It Now
Free Shipping
Condition: For parts or not working Location: Pennsboro, United States
Missing parts just as photo.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: 3 5/8 x 1/8 Compression Piston Ring #2370. This way you can buy 3 rings or 4 either way.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Part: 2 1/4" x 3/16" Piston Oil Ring. This list is for reference purposes only and may have errors. We do our best, but there is always going to be an odd ball engine that needs a different size ring than what we have listed.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A really nice muffler and super nice quality!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Used on lots of antique engines, this is a nice new reproduction Mica tube for igniter's. Made to the highest of standards these will provide you with many years of trouble free service!
0 bids Free Shipping
Condition: New Location: Le Mars, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Simply crimp on to your wire with pliers.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Would look great on your restoration project!
Buy It Now
$5.20 Shipping
Condition: New Location: Centralia, United States
YOU OR LOOKING AT ONE Maytag Upright Hit & Miss Gas Engine Pick Up Tube. I HAVE BEEN SELLING ITEMS FOR OVER 22 YEARS
0 bids Free Shipping
Condition: Used Location: Orient, United States
Cam Gear and Mounting Pin for 3 HP Fairbanks Morse Z. 3 hp Fairbanks Morse Z. Cam gear in good condition and ready to use. I have been collecting hit miss engines for 35+ years and I am very knowledgeable.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Would look great on your restoration project!
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
This is a genuine gas engine oiler complete. The size is #0. This is a 5/8 ounce capacity. This is truly a high quality Made in the USA part.
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
Used on lots of antique engines, this is a nice new reproduction Mica tube for igniter's. Made to the highest of standards these will provide you with many years of trouble free service!
0 bids Free Shipping
Condition: Used Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. (not for use with a spark plug). If you decide you don't want it or find another one cheaper, I won't take it back.
Buy It Now
Free Shipping
Condition: Used Location: Orient, United States
Gear for an Associated / United Magneto. Fits a four bolt Associated / United Magneto. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. Gear is in good condition and ready to use.
Buy It Now
Free Shipping
Condition: New Location: Otterbein, United States
Buy It Now
Free Shipping
Condition: New Location: Le Mars, United States
A neat piece! Well put together and covers a lot of material. Condition: Reprint.
|
|
|
|