|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine 110V 1400r/m. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11250. Big Horn 11250 2-1/2" Universal Dust Port.Features BEEHIVE KITS, PARTS & ACCESSORIES. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
BEEHIVE KITS, PARTS & ACCESSORIES. HAND TOOLS. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion. It is not disclosed to any third party in any way.
Buy It Now
Free Shipping
Condition: Used Location: Mount Holly, United States
Testing and working as it should
Buy It Now
Free Shipping
Condition: New Location: Garnett, United States
For use on drill pipe, casing, and pipeline connections of every type, Mr. B is not affected by H²S or drilling fluids. Flash Point:≥392°F (≥200°C). Most boxes have been opened for inspection and photos.
Buy It Now
Free Shipping
Condition: New Location: Racine, United States
Roll width: 27". 100 yards of material on roll.
0 bids Free Shipping
Condition: New – Open box Location: Baroda, United States
If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11712PK. The key handle allows it to be tightened tool-free for added convenience. Bridge design allows more pressure against the body of the hose. Right hand spiral design. FLOOR POLISHING MACHINES/PARTS.
Buy It Now
Free Shipping
Condition: New Location: Granville, United States
Product - XLE PRO-4040. Part number - 154546. Free Chlorine Tolerance - <0.1 ppm. Maximum Feed Silt Density Index - SDI 5. pH Range, Continuous Operations - 2 - 11.
Buy It Now
Free Shipping
Condition: Brand New Location: , China
Model: YQ--140T. Feeding channel length: <500MM. Feeding channel width: <55MM. Maximum current: 0.11A. Product size: 155x80x99.5MM. Weight: 3.8KG. Panel size: 141x47MM.
0 bids Free Shipping
Condition: New Location: Chino, United States
FZ102 Micro Plant Grinding Machine Pulverizer Crusher Grinder Grain 50G NEW. Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine110V 1400r/m TOP. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
Free Shipping
Condition: New Location: , United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
Free Shipping
Condition: Used Location: Franklin Lakes, United States
FOR YOUR CONSIDERATION ARE THESE TWO SMALL STEEL DRIVE PULLEYS. THESE PULLEYS ARE USED WITH FLAT BELTS; AND ARE 1 ½” O.D. & 3/8” (.375) WIDE IN THE BELT SURFACE AREA. THESE PULLEYS WILL FIT ON A 5/16” (.3125) SHAFT AND HELD IN PLACE WITH A SET SCREW. THE PULLEY IS 7/8" WIDE AT THE CENTER. YOU WILL NOT BE DISAPPOINTED WITH YOUR PURCHASE.
0 bids Free Shipping
Condition: For parts or not working Location: Venice, United States
Mixer Type Drum Mixer. Drum Mixer. Mixing Capacity (Gal.). Mixing Capacity 55.00 gal. Horsepower 1/2 hp. Compatible Container Drum. PARTS/REPAIR. Unit appears to be in good condition, however upon inspection the mounting bracket is missing a screw, the folding propeller is missing a locking screw and the orange roller is not included (see photos).
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11428. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion. It is not disclosed to any third party in any way. Use on machines such as joiners and band saws.
Buy It Now
Free Shipping
Condition: New Location: East Berlin, United States
0 bids Free Shipping
Condition: Used Location: El Paso, United States
This is a used item and has been checked for basic functionaly.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Slide Assembly with Spindle and Hydro-check. Prefer to pick it up yourself?. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Big Horn 11768 20" Dia 5 Micron Dust Filter Bag (OB103) 20" x 32" Long for Delta 50-760 & 50-761 / Jet 708698 & 708639RC. This bag is made with a high durability fabric that can be washed to make clean up fast and easy.
0 bids $7.95 Shipping
Condition: Used Location: Columbus, United States
Works as it should.
Buy It Now
Free Shipping
Condition: Used Location: Franklin Lakes, United States
FOR YOUR CONSIDERATION ARE THESE SIXSMALL RUBBER DRIVE PULLEYS/WHEELS. THESE PULLEYS CAN BE USED AS A DRIVE TO MOVE MANY OBJECTS; AND ARE 1-5/16” O.D. & 1/4” WIDE. OVERALL WIDTH WITH HUB IS 15/32" WIDE. THESE PULLEYS HAVE A 3/16" HOLE AND WILL FIT ON A 1/4” SHAFT, YOU WILL NOT BE DISAPPOINTED WITH YOUR PURCHASE. PLEASE EMAIL ME FOR OTHER PAYMENT OPTIONS OR ANY QUESTIONS YOU MIGHT HAVE AND I WILL RESPOND ASAP. REMEMBER, BID WITH CONFIDENCE. IF YOUR NOT HAPPY WITH ANY TRANSACTION, THEN I’M NOT HAPPY EITHER. I WANT EVERY AUCTION TO BE AN ENJOYABLE EXPERIENCE FOR BOTH OF US. Winning bidder must notify me within 3 days of auction end. Payment must be received within 8 days of auction end or eBay will be notified of non PLEASE LEAVE A POSITIVE FEEDBACK, AS I WILL DO THE SAME FOR YOU.
0 bids Free Shipping
Condition: New Location: Grand Rapids, United States
OEM DONALDSON TORIT P190818-016-436 ULTRA-WEB FR ELEMENT 352MM X 660MM - NOS. Condition is New. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: New – Open box Location: York, United States
OA85 Therostat. Condit ion: New, IN Box. - Old Inventory. Warranty Information.
0 bids Free Shipping
Condition: New – Open box Location: Binghamton, United States
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine110V 1400r/m TOP. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load).
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11309. Big Horn 11309 3" Splice. AIR TOOLS, PARTS & ACCESSORIES. HAND TOOLS. POWER TOOLS. For best connection use clamp (not included). Extend your dust collection system. Made of black ABS plastic.
0 bids $20.00 Shipping
Condition: Used Location: Sun Valley, United States
2 Gemu Stainless Steel 3-way Diaphragm Valve w/ 1/2" Sanitary Fitting. We have 3 units available, the price is for a single unit only. This item is as seen in pictures. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Buy It Now
Free Shipping
Condition: New Location: Sandy, United States
You are buying: Tank Suction Filter Stainless Steel BTF101800 1-1/2" NPT x 1" Hose Threads.
0 bids Free Shipping
Condition: Used Location: Oroville, United States
You will get exactly what you see in the photos. We will do our best to help resolved any issues you may have. In excellent pre-own condition. See photos for full detailed condition.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
MPN: Colchester 13". Will there be a dock or forklift. We choose the carrier. implied or. Unless otherwise specifically agreed to in writing by. Prefer to pick it up yourself?. LOCAL PICK-UP. To get a freight quote we will need to know the following.
Buy It Now
Free Shipping
Condition: New Location: Granville, United States
Product - XLE PRO-2540. Part number - 154543. Free Chlorine Tolerance - <0.1 ppm. Maximum Feed Silt Density Index - SDI 5. pH Range, Continuous Operations - 2 - 11.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
0 bids Free Shipping
Condition: New Location: Chino, United States
NEW Crusher Pulverizer Micro Plant Grinder Grinding Machine 110V 1400r/min.
0 bids Free Shipping
Condition: New – Open box Location: Oldtown, United States
Flange Mount For Mixing Tank Pump. New surplus.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Oasis Machinery DC3000 Heavy Duty 3HP Wood Dust Collector. Model: DC3000. Oasis Machinery Dust Collector has 3 horsepower with an air speed of 1900CFM. It also has two large upper bags for premium ventilation.
Buy It Now
Free Shipping
Condition: New Location: , China
Mixer Section.
Buy It Now
Free Shipping
Condition: Used Location: Mount Holly, United States
Testing and working as it should MISSING PLASTIC COVER
0 bids Free Shipping
Condition: For parts or not working Location: Millersburg, United States
Analytic syst labs FB 40 Filter canister tank 8"Dia x 19" w/7 ports steel Analytic Syst Labs. Part Number FB 40. Model FB 40. Lift Tables. Originally a wet/dry cutting fluid filter. Could be repurposed for many uses.
0 bids Free Shipping
Condition: New – Open box Location: Knoxville, United States
RELAY, 24-240VAC, 10A, 0-10S.
Buy It Now
Free Shipping
Condition: New Location: Irvine, United States
Buy It Now
Free Shipping
Condition: New Location: Butner, United States
1 MICRON POLYESTER FELT #4 SIZE LIQUID FILTER BAGS FOR FILTER HOUSINGS. Materials: Polyester Felt Bag, 304 Stainless Steel Ring. # 4 Size Filter Bags. Sewn seam using 5 line system.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11439. BEEHIVE KITS, PARTS & ACCESSORIES. Big Horn Blast Gates optimizes the efficiency of your dust collection system by seamlessly directing the airflow from one machine to another. Plastic blast gates are economically priced, have a textured surface and an easy sliding gate action.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model: 11300. Big Horn 11300 3" Tee Fitting.Features BEEHIVE KITS, PARTS & ACCESSORIES. HAND TOOLS. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion.
Buy It Now
Free Shipping
Condition: New Location: Merritt Island, United States
Universal Water Heater Gasket.
Buy It Now
$22.00 Shipping
Condition: New – Open box Location: Mitchell, United States
Anhydrous Tank. Guage. In the total. Full it measures. About. 26 " nos. Rochester mfg. stamped. The side of guage. A6480. Have. 4. Of these. Buy 1 or all till there. Gone. Shoot me a offer. On all. 4. If can use. Them
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
0 bids $699.95 Shipping
Condition: For parts or not working Location: Mount Joy, United States
0 bids Free Shipping
Condition: For parts or not working Location: Palmer, United States
Buy It Now
Free Shipping
Condition: New Location: Tooele, United States
2" IN AND OUT AND SMALLER BLOWOUT NORMAL IRON PIPE THREAD.
Buy It Now
Free Shipping
Condition: New Location: Vista, United States
Model # KWY187 byKaufhof. Swivel Joint provides flexibility in duct layout. Swivel design allows up to 20° direction change. If an identical item is unavailable, we reserve the right to substitute an item of equal or greater value at our discretion.
Buy It Now
Free Shipping
Condition: New Location: Nashville, United States
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine 110V 1400r/m. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine) Crushing effect: 30-120 mesh Each crushing weight: <50g Product dimensions: 300×180×290mm Working time: continuous (normal load) Features: 1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fiber materials achieves the desired effect. 2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
|
|
|
|
Dump hopper. Used. Four of these available with stands. Great shape.
|
|
|
This Evacuation Blower is great Condition! More Pictures available! For more information please contact us at 978-422-8222. Ask for Tyler. For shipping cost please submit your address. Loading is FREE!
|
|
YOUR SOURCE. for Pharmaceutical. Chemical, Plastics and Related Process Equipment. For more than 50 years. Federal Equipment Company has been a trusted name in the used pharmaceutical, chemical, plastics and related process equipment industry. As one of the world’s top equipment suppliers, Federal Equipment is dedicated to providing quality used equipment, outstanding service and competitive prices to meet the needs of the used pharmaceutical, chemical, plastics and related process equipment industries. | | | | | |(216) 441-9056 Mouse over image to view ONE(1) Used 6' Rite Corp. Dock Leveler Plate. Model HD3086, Capacity D, 14000 lbs. max, Serial# H20050. Shipping Details: Since each item's and each customer's shipping needs are unique. Shipping costs and methods will vary by item ... moreand customer. Shipping details will be configured by our experienced team at time of purchase and verified with the customer before delivery. More Info Item Number: 24321. Size: 3086.000 Manufacturer: RITE CORP. Location: CLEVELAND. OHIO All items are F.O.B. Location and are sold AS IS. Please contact Bob Wells at bob@fedequip.com or call 216-441-9056 for more information. All descriptions are a reflection of the item to the best of our knowledge and are subject to change. © 2009 Federal Equipment Company 8200 Bessemer Avenue. Cleveland, OH 44127 Phone(216) 441-9056 | Fax 216.271.5210 | Email(Bob Wells)
|
|
LEGION KETTLE Description: S/N 726 37 4 Max Allow Wk Pressure 55 psi@ 300°F Inner shell thickness.125 Radius 20 Outer shell thickness.063 Radius 20.25 80 Gallon Capacity Wall mount Shipping: Buyer is to arrange shipping. Skidding/Crating available at additional cost. Shipping will not take place until payment is received in full. Sales Tax: For shipments within California. We are required by State Law to collect Sales Tax. Payment: Payment shall be made in the form of a Wire Transfer. Paypal or Cashiers Check. Payment must be received within 10 days of auction close. Warranty: Kettle is sold as is. Where is. All information in the description is listed as accurately as possible. We do not guarantee the information’s accuracy. Questions: Please contact: Xavier Rodriguez Tel: 760) 246-0041 ... moreFax: 760) 246-8431 Email: 9516 Commerce Way. Adelanto, CA 92301
|
|
Detroit Diesel Allison Engine Model 12V-149T w/ Mayland Cecon Clutch Detroit Diesel Allison engine. Model: 12V-149T, w/ Mayland Cecon clutch, S/N: 83409, size: 8m, W/ Twin disk transmission. Model: DBF3180P0, spec# 33698, S/N: 187000, w/ Amarilo right angle gear drive. S/N: C1200148386, HP rating: 1000 at 885 vertical RMp. W/ GWB water pump, model: AW7168, w/filters, muffler and two tanks Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our credit card policy BEFORE paying using these methods Our preferred payment method is wire transfer or company check Invoices will be provided Subject to prior sale Shipping prep and charges are responsibility of the purchaser ... moreWashington residents add 8.4% sales tax without a resale certificate As is. Where is FPlease allow a week for corporate processing of payment Contact: E-mail: C& D Professional Services Phone: 360-459-1395 C& D Services statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by C& D to determine it's fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The seller hereby expressly disclaims all warranties, either express or implied, including an implied warranty of merchantability or fitness for a purpose
|
|
SMICO 30X30 SIFTER BOX If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model has bee n st ored ins ide, and is ready to ship to y ou. Please ask about international shipp ing. This model includes eleven s ifter decks. S/N 20106. C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, ... moreJason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
|
Purchased as a brand new machine in July of 2012. Machine has low hours and we have simply out grown the machine. Great for a small recycler or a warehouse that generates a good amount of styrofoam. 3.15hp motor- Throughput is 66-132 lbs/hr- Inlet size is 18" x 13" Log size is 7" x 7" Machine weight is 925 lbs- Dimensions 85" x 22" x 70" Appplications EPS/EPP- EPS Volume Reduction is 50:1 or 70%98% Power requirements are 3 phase- 220V.
|
|
Mitsubishi(hrstot) DATA CABLE MODEL: ac 06b AC 06-B 2.5 FT 45 PRONG Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBEND INDUSTRIAL. INC 803-222-0460– 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and ... moreseller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On
|
|
|
ALL CAST IRON CONSTRUCTION- VERY LITTLE SIGNS OF WEAR- 300 POUNDS SHIPPING WEIGHT- I HAVE OTHER BRANDS- PRATER- SPROUT BAUER- BUHLER- ETC Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sale is for(1) AIR MITE AIR PRESS DAP-24 WITH RIGHT AND LEFT PUSH BUTTON CONTROLLER. PRESSURE REGULATOR AND EXHAUST VALVE. This has very light scratches other than that no damage This has been tested and works as it should The one shown in the photos is the one you receive All this comes with is shown in the photos Spec's; Mfg- Air-Mite Bore 5" Cylinder Height 7" Stroke- 4" Shaft- 1" Dia Max Opening- 6-1/4' Max height- 22" Over-all width- Base 7" Controller 9 1/2" Wide Weight- 86.6 LB
|
|
YOU ARE BIDDING ON A DTI 5000 AUTOMATIC FEED SCREWDRIVER. MODEL NO: DTI 5000. Notes: ITEM WAS FULLY FUNCTIONING WHEN REMOVED. The vibrator works. But n o further testing was done. This system does not come equipped with hoses. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) DTI 5000 Automatic Feed System, Consists of: 1) Parts Feeders. Model: B-10, vibratory bowl, 1) CKD R3000 regulator. Max. 150 psi, 1) CKD L3000 lubricator. Max. 150 psi, 1) CKD D300 distributor. Max. 150 psi, 1) CKD F3000 filter. Max. 150 psi, 1) Control box- Mistubishi relay output AC-10MR-D. TUV Power Supply PS5R-A24, Specifications: System: Manufacturer: DTI(Design Tool Inc. Model: 5000, Bowl: Manufacturer: Parts Feeders Inc. Model: B-10, 110V. 60Hz, 1A, Control box: variable ... morespeed, CKD: 1- R3000 regulator. Max. 150 psi, 1- L3000 lubricator. Max. 150 psi, 1- D300 distributor. Max. 150 psi, 1- F3000 filter. Max. 150 psi, We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or if you would like to pick up this item and save shipping please let us know. We will ship to locations other than the continental US. Please contact me for a shipping quote. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED IN OUR STORE.
|
|
|
This is a clean unit! Manufacturer: Fanuc Model: a5201 i Controller: R-J2 This robot needs a servo motor. More Pictures available! For more information please contact us at 978-422-8222. Ask for Tyler. For shipping cost please submit your address. Loading is FREE!
|
|
ITEM# 07313 USED TOSHIBA 7.5 HP MOTOR 213T FRAME. 1750 RPM, 230/460 VOLT, 20.6/10.3, 3-PHASE, 60 HZ ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. ... moreHowever. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 07309 USED RELIANCE DUTY MASTER 7.5 HP MOTOR 256U FRAME(1170 RPM) 460 VOLTS. 9.6 AMPS. 3-PHASE. 60 HZ ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal ... morechecks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
Quote# MH026. 2-STAGE INDUSTRIAL PARTS WASHER EQUIPPED WITH: Electric Heat 15" Mesh Conveyor System Two Blow Off Stations CATALOGUE SPECIFICATIONS: Conveyor System Continuous Belt(Width) 15" Conveyor Opening Height. 7.5" Conveyor Speed. Variable Part Opening. W x H. 15" x 7.5" Wash Solution Temperature. 180 Degrees F. Rinse Solution Temperature. 180 Degrees F. Blow Off Temperature. 190 Degrees F. Wash Section Length. 1' Drain Section Length. 2'6" Rinse Section Length. 1' Drain Section Length. 1'3" Blow Off Length. 2' Dimensions L x W. 12' x 6'6" Height to Top of Blow-Off. 8' Electrical Requirements. 460/3/60. NOTE:These Specifications Are As Taken From A Close Physical Inspection Of The Machine However We Could Not Find ... moreA Manufacturers Name Or Serial Number. Machine Sequence is Load.Wash,Blow Off and Unload. PRICE: F.O.B. OUR WAREHOUSE. $4.950.00. All machine/equipment subject to prior sell. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13df8f2deb8-0xf4-
|
|
|
CAN NOT FIND NAME ON THIS MACHINE USED PRATER SO IT WOULD SHOW UP, NICE CLEAN MACHINE SHOWS VERY LITTLE SIGNS OF WEAR, SHIPPING WEIGHT 300 POUNDS HAVE OTHER BRANDS SHICK- BUHLER- PREMIER PNEUMATICS- ETC, LOCATION B8-4, IF YOU RECOGNIZE THIS MACHINE BRAND PLEASE LET ME KNOW, Powered by The free listing tool. List your items fast and easy and manage your active items. 11.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*76g%3E11%3E-13df8f2ded6-0xff-
|
|
|
Both the 240 Grit Diamond Hone and the Starrett 6" Scale are in like new condition. Please add $5.00 for shipping on this item. As always. I will combine shipping to save you money. 100% Satisfaction is guaranteed every time! Thank You and have a wonderful day!
|
|
ITEM# 04748 USED 3 CUBIC FT SHICK TUBE-VEYOR SURGE HOPPER STAINLESS STEEL. 10" FLANGED INLET. 4" DUST DRAW OFF PORT. 6" DIA. FLANGED OUTLET. GASKETED HOPPER ACCESS PANEL. HOPPER DESIGNED FOR LEVEL PROBE AND PNEAUMATIC VIBRATOR. SHIPPING INFO: ONE SKID. 44X44X44, 192 LBS. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice ... moreto process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Complete Duroflow blower with 40 HP motor. Model 4509 VT Has silencer. Working takeout. Load on your carrier or arrange shipping.
|
|
|
Used United Excen- Bottom Ash Clinker Grinder. 20" x 24" Inlet, 12" Outlet With 14" Crushers( 9 Blades) SN. 30109. Note: No drive included. 3 Available)
|
|
|
Midwestern 48" Screens- P& K Equipment. Inc. fax: 216-831-7779 Midwestern 48" Screens 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13df8f2dc70-0xfc-
|
|
|
CPM 7000 22" DIA. 5/32" HOLE 2-1/8" DEEP 5/16" RELIEF RECONDITIONED You're getting a top quality mill at the best price as always from Continental Agra Equipment. Experience the Continental Agra difference! We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
|
Used 360 liter stainless steel vertical tank. 32" dia x 28" straight height. Dished top and bottom heads. Internal rated 30 psi/ Full vacuum@ 300 degrees F. On castors with wheels. Built by Tolan. Item 10724-003 Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
|
Used Kice Model 55A4 Cast Aluminum Diverter Valve. 4" good condition- designed for gravity flow applications- manual actuator has holes for attaching a rope
|
|
|
~ Used unit in good physical condition. We have no way of testing it but it was removed from a working environment(body shop recon center that closed down) The buyer should have item inspected and certified upon receipt and before placing into use. SHIPPING: Local pick up is prefferred but we will ship. This unit will be shipped freight on a pallet. Shipping is to be arranged and paid for by buyer. We can supply a quote but we will need to know if the shipment will be sent to a residential or commercial location and if lift gate service is required. We are located at a commercial location in Tampa. FL 33634 and will load this pallet on to a freight truck with a forklift. There is no extra charge for palletizing. THANKS FOR LOOKING
|
|
Green Lapper Polisher MARKDOWN! Was: $690 Now: $449 Green Lapper Polisher Green Lapper Polisher Machining Equipment and Tools Used Green Lapper Polisher Surplus Used. MEMA111000679 Green Lapper Polisher. Buy It Now Manufacturer, Green Instrument Co. Type, Machining Equipment and Tools, Item Condition, Used, Material, Serial# V/H, SKU, MEMA111000679, Type, Lapper Polisher, Buy It Now All items sold are shipped from our Baton Rouge. LA location unless otherwise specified. Actual shipping/freight cost is calculated based on your location. We sell unique items and understand that each customer's shipping needs vary. Shipping/freight details will be determined at the time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code ... morehere is 70815. Buyer pays all shipping cost. All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge. However, we the Seller make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability for a particular purpose of any item. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. 1-877-658-8218 Universal Industrial Assets 11150 S. Choctaw Drive Baton Rouge. LA 70815 Phone: 1-877-658-8218 Universal Industrial Assets is a full service solutions provider offering a range of capabilities that include buying. Selling, consignment, online and sealed bid auctions, as well as complete asset recovery programs. Centrally located in Baton Rouge. LA and in the heart of America’s chemical corridor we have over 40,000 square feet of covered warehouse space with much of our large inventory ready to ship immediately. | | | | © Universal Industrial Assets 2011—2012. Power
|
|
|
SEE PICTURES 200 POUNDS SHIPPING WEIGHT 8 INCH ES INSIDE DIAMETER, 11 INCHES OUTSIDE DIAMETER STAINLESS ROTOR AND BALDES, REPAIRED, LOC=B73, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Disc Sander MARKDOWN! Was: $230 Now: $149 Disc Sander Disc Sander Machining Equipment and Tools Used Disc Sander Surplus Used. MEMA111000688 Disc Sander. Buy It Now Manufacturer, Unknown, Type, Machining Equipment and Tools, Item Condition, Used, Material, Serial# V/H, SKU, MEMA111000688, Type, Disc Sander, Buy It Now All items sold are shipped from our Baton Rouge. LA location unless otherwise specified. Actual shipping/freight cost is calculated based on your location. We sell unique items and understand that each customer's shipping needs vary. Shipping/freight details will be determined at the time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 70815. Buyer pays all shipping cost. All items are sold“AS-IS. ... moreWHERE-IS” Items are described to the best of our knowledge. However, we the Seller make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability for a particular purpose of any item. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. 1-877-658-8218 Universal Industrial Assets 11150 S. Choctaw Drive Baton Rouge. LA 70815 Phone: 1-877-658-8218 Universal Industrial Assets is a full service solutions provider offering a range of capabilities that include buying. Selling, consignment, online and sealed bid auctions, as well as complete asset recovery programs. Centrally located in Baton Rouge. LA and in the heart of America’s chemical corridor we have over 40,000 square feet of covered warehouse space with much of our large inventory ready to ship immediately. | | | | © Universal Industrial Assets 2011—2012. Powered by The free listing tool. List your items fast and easy and ma
|
|
Description UP FOR SALE IS INVENTORY# MX-202. B.E.S.T. BE-440-2C MOTOR. S/N:UT57048001 CURRENT: AC 3 PHASE 60 CYCLES. VOLTS-230/460 | AMPS-0.64/0.37 | RPM-3380/3550. WEIGHT-19 LBS. CONDITION OF ITEM 1) NEW AND IN BOX 2) NEW BUT NO BOX X. 3) USED; AS-IS" 4) FOR PARTS ONLY Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international fees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading ... morefreight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.169.0
|
|
|
Brooks Z-Bot End Effectors for up to 6” wafers New- Never Used
|
|
|
Dual 6" wide belts driven by a stand alone 15 hp motor. Pneumatic actuated cylinders compress belts against roll product to surface drive material out of unwind stand either over or under feed product. capacity of up to 120 inch diameter roll. Hydraulic unit included for side shifting roll. originally designed for reel type unwind shaft. Modifications to saddles are required to run a regular style shaft. entire unit is brand new. it was designed and built by NMN Inc for a test product run. built to handle parent rolls of toilet paper, paper towels, napkin stock. Will handle up to 120" wide x 120" OD. Powered by
|
|
|
Challenge Paper Cutter/ Guillotine Trimmer 305 MCPB This paper trimmer is in very good condition and ready to reassemble(bolt side tables back on) and use. no known faults.
|
|
|
USED SEE PICS APPROX SHIPPING WEIGHT: 520 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. AJ. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT CONDITION- FROM CLOSED PLANT- ALL STAINLESS- 3 PHASE 1/2 HORSEPOWER 208/230/460 VOLT MOTOR- SEW GEAR DRIVE- OTHER ROTARY VALVES FOR SALE-SPROUT BAUER- SHICK- PRATER- ETC- B4-4 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e04918abc-0xfc-
|
|
|
Used Elektror Side Channel Blower- Type SD900/ S360- Good working condition 20.5 HP 230/460 V. 60 Hz, 3 PH, 50/25 A 3500 RPM Weight is ~255 lbs. Packaging cost included. Freight shipping cost based on delivery address and is not included.
|
|
|
USED. TEFLON LINED. OUTLET PORT SIZE: 13-1/2" X 13-1/2" 12" STEEL AUGER SCREW INSTALLED. ROTOR STATOR POWERED. SANITARY TYPE MOTOR. AIR ACTUATED SLIP DISC INSTALLED ON MIDDLE OUTLET PORT. EST. SHIP WEIGHT: 1248 LBS. OVERSIZED NEEDS TO SHIP FLAT BED. SEE PICS. APPROX. SHIP WEIGHT: LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. TW/PB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1/4 HP 3 phase. Approx. 60 gallon. Works Great. Can Include ceramic media. Ceramic Vessel is approx. 1.5-2 inches thick. Local Pick up or shipped freight paid by buyer. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e04918bbf-0xfe-
|
|
|
Inventory# DUS2032 Manufacturer: Amano Model/Catalog# EM-15E CFM: 530 Serial# 17282 HP: 1.0 115 volt. Single phase, 11 amps. 52"L x 24"W x 28"H OAD. For shipping and handling arrangements. Please call Surplus Industrial Supply.com@ 616-451-4100 or toll free@ 888-451-9877.
|
|
J. Little Mercer Co. Inc. 10 GALLON STAINLESS STEEL STEAM JACKETED KETTLE Stock Number: E-2263 Mfg. Cleveland Range Co. 17 inch diameter x 13 inch deep Model KDT-10T. NB stamped Jacket rated for 50 psi@ 298 deg. F Tilt with sink base Will pressure test jacket! Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have ... morea bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
INVINCIBLE AIRFLOW SYSTEMS/ CYLCONAIR BLOWER MODEL:6000-10 AMP 10 SERIAL: 51K871 TYPE AO 10 hp 208 VOLTS 25 AMPS 3 PHASE 60 CYCLES CYLCLONAIR BLOWER MODEL VFC501A-7WP 230V 50/60 HZ. 3 PHASE FUJI ELECTRIC CO. This item is too heavy to ship standard. It will need to be shipped via freight. Buyer is responsible for all and any cost associated with the shipping of the item. We will skid and load at no cost. But, crating is additional charge. Equipment Technologies Inc. is a used and surplus equipment dealer. These items come from company liquidations, we do our best to convey any and all information we have on items. WHY BUY FROM US? We are proud of and value our feedback. ETI cares about their customers satisfaction and it's reputation and vows to resolve any issues. TERMS OF SALE Please ... moreread our listings carefully and ask questions. Buyers agree to our terms and conditions. If any questions or issues arise please contact us. Items and goods are checked prior to posting and shipping however. If faulty on delivery we must be notified within 3 days and returns are accepted within 7 days of buyer acceptance of items. We over exchange or refund if a replacement is not available. Buyer is responsible for all return shipping costs. PAYMENT TYPES PAYPAL. DELIVERY METHODS: We happily ship worldwide. But, please contact us first so correct shipping quotes can be given based on buyer location. Most items are shipped UPS OR USPS unless otherwise specified or requested or item exceeds weight limitations and need to be shipped via a freight carrier. If purchasing multiple items we will try to combine shipping when available please check invoice for final shipping amount. Please feel free to contact us! Serious inquires only please. Mon-Fri 8am-5pm EST 603-881-5253 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Filter Specialists Inc Filter FSPN-800#7-C.S. 9" Flanges 4-1/2" In/Out No Basket THIS IS A USED FILTER UNIT CERTIFIED BY FILTER SPECIALISTS INC. IN 1999. THIS ITEM DOES HAVE WEAR. AND SCRATCHES, SHOWN IN THE PICTURES ABOVE. THE INLET/OUTLET HAS A 9" FLANGE WITH A 4.5" PORT. THIS UNIT IS MISSING ITS BASKET FILTER. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# FSPN-800#7-C.S. OVERALL DIMENSIONS: WIDTH: 25" LENGTH: 31" HEIGHT: 64.25" SHIPPING WEIGHT: 547 LBS OTHER DETAILS: THIS ... moreITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIM
|
|
|
Used Joest Vibratory Feeder- Dual Drives. Type JD 40- 9"x56"x2" Stainless Steel Pan- Good condition with a few scratches on the base plate- Controller not included Freight: FOB Richmond. CA- Charges based on delivery location and final weight and dimensions with packaging
|
|
|
Rite-Hete Square Cast Aluminum Melting Tank Specifications: Volts: 110 Phase: 1 Amps: 18 Capacity: 2 gallon Type: V Temperature: 150-550 degrees Robertshaw: Temperature controller Diameter x Depth: 11'x5'x9' Wattage: 1000 Additional Info: Cast aluminum crucible, Cast aluminum leveling legs, 20 gauge stainless steel shell. 4 finish, Multiple-circuit heating element for uniform heat, 2” fiberglass insulation, Aluminum cover with heat resistant knob, Adjustable temperature control, 6’ power cord, Posted with
|
|
LIGHTNIN CHEMICAL TANK AGITATOR MIXER B77R0067M-TK 208-220V 48" SHAFT 3/4" DIA 1725 RPM 3 PHASE RATIO 4:1.43 HP 10" PROPELLAR ITEM WILL HAVE TO BE SHIPPED IN 2 PACKAGES SHAFT AND PROPELLER IN ONE MIXER AND MOTOR IN THE OTHER Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of ... morethe end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly acce
|
|
Comeq Euring CM 2000 Pipe Roller Shaper MARKDOWN! Was: $4500 Now: $3499 Comeq Euring CM 2000 Pipe Roller Shaper Comeq Euring CM 2000 Pipe Roller Shaper Machining Equipment and Tools Used Americor Comeq Euring Model CM 2000 Pipe Roller Shaper USED. MEMA651000702 Comeq Euring CM 2000 Pipe Roller Shaper. Buy It Now Manufacturer, Comeq Euring, Type, Machining Equipment and Tools, Item Condition, Used, Material, Serial# CM 2000 TOP 2, V/H, SKU, MEMA651000702, Type, Pipe Roller Shaper, Buy It Now All items sold are shipped from our Baton Rouge. LA location unless otherwise specified. Actual shipping/freight cost is calculated based on your location. We sell unique items and understand that each customer's shipping needs vary. Shipping/freight details will be determined at the time of purchase ... moreand verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 70815. Buyer pays all shipping cost. All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge. However, we the Seller make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability for a particular purpose of any item. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. 1-877-658-8218 Universal Industrial Assets 11150 S. Choctaw Drive Baton Rouge. LA 70815 Phone: 1-877-658-8218 Universal Industrial Assets is a full service solutions provider offering a range of capabilities that include buying. Selling, consignment, online and sealed bid auctions, as well as complete asset recovery programs. Centrally located in Baton Rouge. LA and in the heart of America’s chemical corridor we have over 40,000 square feet of covered warehouse space with much
|
|
|
You are bidding on: 500 Liter Mobil Stainless Steel Tank on Wheels 30" x 48" If you want these items to be shipped you must contact us be fore bidding! You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 7.75% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
USED. DRIVE TYPE: SEW EURODRIVE. SA62DT90L4. 55.97 RATIO. 230/460 VOLTS 1720 RPM. UNIT HAS STEEL ROTOR. VALVE MAY BE NEW OLD STOCK REAL CLEAN NO WEAR. SEE PICS. APPROX. SHIP WEIGHT: 300 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES,CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. TW/PB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
ITEM# 07270 MARTIN ELECTRIC 7 HP MOTOR 213T FRAME 213T FRAME. 1750 RPM. 208-230/460 VOLTS. 24-21.6/10.8 AMPS. 3-PHASE. 60 HZ. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that ... morewe do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
Pasadena Hydraulics. Inc. Compression Molder ~ Model 30U12125-3KCS-N-MS7-P ~ S/N 83-8-009 ~ Heaters(440 volts. 3 phase, Cycles: 60, 11.8 KW, 30 amps) with Motor(440 volts. Cycle: 60, 3 phase, 2.6 amps, 1.5 HP, 1200 RPM) with Westinghouse Heavy Duty Safety Switch(Cat#HF362. 60 amps, 600 volts) Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our PayPal policy BEFORE paying using these methods Our preferred payment method is wire transfer or company check Invoices will be provided Subject to prior sale Shipping prep and charges are responsibility of the purchaser All freight shipments require a complete address. A contact name, a contact phone number and a ... morecontact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' delivery. Freight quote is based on the information that you supply to us. Michigan residents add 6% sales tax without a resale certificate As is. Where is FOB Midland. MI Please allow a week for corporate processing of payment Contact: E-mail: mmisllc48642@gmail.com Mid-Michigan Industrial Surplus. LLC For existing feedback on EBay see our established electrical company Potential Electrical Supply. Both companies are located on the North side of Midland Michigan at 3045 and 3063 E. Mercantile Drive easy access on and off of US-10 Eastman road exit. Mid-Michigan Industrial Surplus. LLC statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by Mid-Michigan Industrial Surplus, LLC to determine its fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The
|
|
ITEM# 10073 28" DIA. STAINLESS STEEL CYCLONE USED 5" DIA. DIRTY AIR INLET. 5" DIA. CLEAN AIR OUTLET. 10" DIA. MATERIAL OUTLET. 72" OVERALL HEIGHT. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your ... moreearliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Item# 41837. 400 GAL STAINLESS STEEL TANK. One(1) used 400 gallon stainless steel tank, Approximately 44" diameter x 70" straight side. Dish. Top and bottom on 4 legs. $2.000.00 USD PRICE AS IS WHERE IS. IDAHO. ALL ITEMS SUBJECT TO PRIOR SALE. SKIDDING AND CRATING AT ADDITIONAL COST. SELLER NOTE: PLEASE CONTACT BEFORE CLICKING BUY IT NOW. Best regards. Joshua Mitchell. Field buyer Surplus Unlimited Inc. 3120 West 84th Street Unit 10 Hialeah. FL 33018(786) 518-2711(Main) 786) 518-2710(Direct) 786) 518-2712(Fax) 954)665-4905(Cell) joshua@surplusultd.com(e-Mail) Surplus Unlimited where our services are UNLIMITED!
|
|
|
Manufacturer: Conair Model: DC-1 Specifications: Filter Area: 42.8sf Max Collection Capacity: 1.1 cu. ft. Dimenions: H: 58" L: 15" D: 20 Weight: 110lbs More Pictures available! For more information please contact us at 978-422-8222. Ask for Tyler. For shipping cost please submit your address. Loading is FREE!
|
|
Westinghouse Dresser Series 20 Serial# 467X874 3 Phase Compressor Vacuum Pump Working but fair condition Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our credit card policy BEFORE paying using these methods Our preferred payment method is wire transfer or company check Invoices will be provided Subject to prior sale Shipping prep and charges are responsibility of the purchaser Washington residents add 8.4% sales tax without a resale certificate As is. Where is Contact: C& D Professional Services Phone: 360-459-1395 C& D Services statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer ... morehas been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by C& D to determine it's fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The seller hereby expressly disclaims all warranties, either express or implied, including an implied warranty of merchantability or fitness for a purpose
|
|
Electric Heated Pot You are bidding on one Sta-Warm Electric Heated Pot. Type no. 52MAWSSS. Item is used. Unit shows signs of cosmetic wear including scratches and scrapes that will not affect the unit's function. The outside of the unit has come build up on it and paint marks from its previous owner. The inside of the unit contains the remnants of the previous owner's chemical. Pot Specifications Voltage: 208 Ph. 3 Cycles: 60 Amps: 9.1 Comes with Thermostat and 8ZTSS Valve. Valve Specifications: 208V 1.6 Amps Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence or a business with a truck high dock or forklift. Local ... morepickup in Rochester. NY 14606 is free The buyer can set up freight themselves($50 packaging fee added to total) or we can provide a competitive quote to the buyer. Shipping weight 300 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Dual 24" Bowl California Vibratory Feeder USED& IN GOOD RUNNING CONDITION SOLD AS IS BUYER IS RESPONSIBLE TO ARRANGE AND PAY FOR SHIPPING We charge a $100 handling fee to package and load the machine. THANKS AND HAPPY SHOPPING!
|
|
Eaton 300 HP Dynomometer Model C 50U Rated capacity 77 lb ft@ 200 rpm to 3.400 rpm Rated capacity(absorbing) 300 HP- 2000 rpm to 5000 rpm Torque arm 18.000 in. D.C. excitation driving 90V. 5.92 amps, 9.91 ohms@ 20ËšC Absorbing. 90V, 9.03 amp, 6.52 ohms@ 20ËšC Water requirements 5 GPM max driving 30 GPM(max) absorbing 45 PSI(min) pressure 100 PSI(maz) pressure Attached Induction Motor: Model# MO-67165-0300 Type NP-1 Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our credit card policy BEFORE paying using these methods Our preferred payment method is wire transfer or company check Invoices will be provided Subject to prior sale Shipping prep and ... morecharges are responsibility of the purchaser Washington residents add 8.4% sales tax without a resale certificate As is. Where is FOB De laware Please allow a week for corporate processing of payment Contact: E-mail: C& D Professional Services Phone: 360-459-1395 C& D Services statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by C& D to determine it's fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The seller hereby expressly disclaims all warranties, either express or implied, including an implied warranty of merchantability or fitness for a purpose
|
|
|
BT# 11675 B-080.3Y You are looking for: HANSHIN LIMITED JA-9B VIBRATORY BOWL FEEDER 9" DIA. 220V USED EQUIPMENT. FULLY TESTED! IN VERY GOOD CONDITIONS. 15 DAYS WARRANTY! SHIPPING FREIGHT TO BE CALCULATED! Manufactured by: HANSHIN LIMITED. Additional info: VIBRATORY BOWL FEEDER Bowl Model: JA-9B Diameter: 9 inch. 220 Volts Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
|
|
Thank you for your interest in Aaron Equipment Company. A leading provider of used and reconditioned process equipment. For more than 63 years, the Aaron Companies have supplied the processing industries with quality, new, used and reconditioned equipment and asset management services. Buying and Selling Process Equipment Made Easy! Used- Tank. 110 Gallon, 304 Stainless Steel, Vertical. 30’ Diameter x 36’ straight side. Flat open top with a 1 piece cover, sloped bottom. Openings side 2’ tri-clamp, 3’ tri-clamp, 4’ tri-clamp, 4’ side bottom outlet. Mounted on 3 stainless steel legs. Click on image above to see larger view. Description. Used- Tank. 110 Gallon, 304 Stainless Steel, Vertical. 30’ Diameter x 36’ straight side. Flat open top with a 1 piece cover, sloped bottom. Openings side 2’ ... moretri-clamp, 3’ tri-clamp, 4’ tri-clamp, 4’ side bottom outlet. Mounted on 3 stainless steel legs. ref# 42920019. Contact Information. Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Shipping Policy. All items sold are FOB Bensenville. Il location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card. Additional Photos.
|
|
|
Model 4320-0018. For 2” Tube Diameter, 90° Elbow, Standard Modulus for ISO Flanged Elbows, Long Radius· CE Marked· 100-120VAC Input Voltage· 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13e173fbf50-0xe8-
|
|
RC IFI Listing is for one AMERICAN PRECISION USED BASCO Type 500 Heat Exchanger Serial No. 112404 Approximate Dimensions: 17 1/4" x 4 1/2" x 5 1/2" Item is used. Stored in surplus inventory. We have more process related equipment in our inventory so. Call us 207-757-8201 or email@ Visit www.maineequipmentconnection.com to see our ever changing inventory of sawmill. Industrial and process related equipment and machinery. Contact The Equipment Connection US Rt. 2 PO Box 180 Smynra Mills. ME 04780 www.maineequipmentconnection.com SHIPPING DETAILS All items sold are shipped FOB our Smyrna Mills. ME location, unless otherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's shipping needs are unique, ... moreshipping costs and methods will vary by item and customer. Shipping details will be configured at time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 04780. TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(THE EQUIPMENT CONNECTION and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of ant item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best to describe each item the best that we can. We strive to maintain a high feedback score and we are always willing to work with you on any problem. So please contact us before you resort to leaving negative feedback. Thank you.
|
|
Barnstead Thermolyne Reverse Osmosis Water System ~ Model D9021 ~ S/N 9.02E+11 ~ 60 Liter Capacity Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our PayPal policy BEFORE paying using these methods Our preferred payment method is wire transfer or company check Invoices will be provided Subject to prior sale Shipping prep and charges are responsibility of the purchaser All freight shipments require a complete address. A contact name, a contact phone number and a contact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' ... moredelivery. Freight quote is based on the information that you supply to us. Michigan residents add 6% sales tax without a resale certificate As is. Where is FOB Midland. MI Please allow a week for corporate processing of payment Contact: E-mail: mmisllc48642@gmail.com Mid-Michigan Industrial Surplus. LLC For existing feedback on EBay see our established electrical company Potential Electrical Supply. Both companies are located on the North side of Midland Michigan at 3045 and 3063 E. Mercantile Drive easy access on and off of US-10 Eastman road exit. Mid-Michigan Industrial Surplus. LLC statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by Mid-Michigan Industrial Surplus, LLC to determine its fitness for a purpose. The Property is sold and conveyed"AS IS, WHERE IS, and without representation or warranty. The seller hereby expressly disclaims all warranties, either express or implied, including an implied warranty of merchantability or fitness for a purpose.
|
|
|
Rapat conveyor 1055 with adjustable height. Belt approximately 15” by 13 ½' We can order and install a new belt for you at extra cost(contact us for quote) Model 5-103/87 Single phase motor 1725rpm 3/4HP 115V FOB El Dorado KS Please note: A loading and packaging fee of $50 will be charged. International buyers please note: Import duties. Taxes and import charges are NOT included in the item price or shipping cost. These charges the buyer's responsibility. Please check with your customs office to determine costs prior to bidding or buying.
|
|
|
Model 4530-0053 Rev. C. For HPS NW 80, 2 Stage, Angle Vacuum Val 150°C Temperature 100-120VAC Input Voltage
|
|
DONALDSON TORIT CHECKER BOARD CAT#8PP-36775-02 NC INDUSTRIAL SUPPLY. PLEASE CALL FOR EXPEDITED SHIPPING! WE ACCEPT CREDIT CARDS! WE SHIP OVERNIGHT UP UNTIL 3:30 PLEASE CONTACT US! WE OFFER COMBINED SHIPPING. 704)821-1104. Thank you for your interest in our products. You may view more products by visiting our eBay store at. Http:stores.ebay.com/NC-INDUSTRIAL Shipping Details. All shipping originates from 28110 zip code. We ship within 5 business days after payment is received. WE ONLY SHIP TO THE U.S.A. AND CANADA LOCAL PICKUPS ARE FREE OF SHIPPING CHARGES. FREIGHT SHIPMENTS. Large items that require an LTL shipment generally go out within 5 business day after payment is received.Seller must provide us with accurate shipping info on freight shipments. Information that we need is: Business Name. ... moreShipping Address, Contact Information, including phone number. Also, please inform us if the receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. Sales Policy: We consider your bid as a contract. Please only place a bid if you're serious about buying an item. If the item has not been paid for within 3 business days the item may be offered to the next highest bidder or re-listed.Payment is due within 3 days of purchase unless otherwise discussed between the buyer and the seller. Payment Details: We accept PayPal Payments or Cash for local pickups. We do not accept personal or business checks. Sign up for PayPal. It's the fast. Easy and secure way to pay online. Returns: We guarantee items to arrive as stated in auctions. IF YOU HAVE ANY QUESTIONS PLEASE ASK BEFORE BIDDING! Feedback: We like for our customers to be completely satisfied with their purchase. If your transaction is not to your satisfaction. Please contact us BEFORE leaving any feedback. Inform us of the issue and we will do our best to resolve the problem in order to receive positive feedback. Good communication ensures a successful transaction and resolution prior to advance posting of permanent feedback and gi
|
|
|
180 Gal Vertical Stainless Steel Portable Tank- P& K Equipment. Inc. fax: 216-831-7779 180 Gal Vertical Stainless Steel Portable Tank
|
|
This is a very low usage system in great condition. I have used it for prototyping our own products and we are now done. Includes: ZCorp Z406 system. Wax dipping station for providing rigidity to the parts and brings out the color. Included is a bunch of wax. Depowder station. Includes the air compressor and nozzle for removing the fine powder from parts. Industrial vacuum with heppa filter and many extra bags. This is used only for powder clean up and also provides suction. To the depowder station. Bags are then emptied back into the machine to re-use the powder. Original tool box kit which includes calibration plates tools and lubes. ZPrint software on CD that will run on any windows PC. This imports the 3D drawings and generates the printer files. Very easy to use. Also includes operations ... moreand troubleshooting manuals on CD. Misc scoops and strainers are also included. Comes with a gallon or two of powder and some binder fluid. Includes the system Monitor and keyboard but does not include the generic PC. You will need a standard PC with RS232 port to talk to the 3D printer. All pics taken this week and video of it running available upon request. Local pickup or buyer can arrange shipping. Any Questions. Please ask. ZCORP INFORMATION BELOW. Z Corporation 3D Printers help you build speed and efficiency into your design process and the highest quality into your products. The printers are professional. Complete physical modeling solutions delivering full-color communication. What's more, they are fast, convenient and easy to operate, allowing you to accelerate the design process and get your products to market ahead of the competition. You already know that speed is the most valuable element in the design and manufacturing process. Z Corp.s 3D Printers deliver parts in 1-2 hours instead of days. Fueling immediate feedback and decision making. This process acceleration will allow you to design and sell products more competitively. Our full-color printing systems give your engineers a clearer window into the desi
|
|
|
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Precision Stainless 270 Liter Jacketed Stainless Steel Tank Bio Reactor Lightnin Mixer Agitator Mixer Model: XJSS-18AM On wheels If you want these items to be shipped you must contact us be fore bidding! You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 7.75% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
THIS METER HAS A BLUE FILM ON OUTSIDE- I PEELED OFF WHAT I COULD BUT SOME REMAINS. WAS USED IN INK LINE. B6-3 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BUHLER MIAG ROTARY AIRLOCK VALVE TYPE MPSF SIZE 22/22 MEASURES 8" X 6" I.D CHAMBERS MEASURE 2 3/4" TALL X 8 3/4" LONG TAPERED 2 1/4" WIDE TO 1" DUAL SHAFTS 1 1/2" X 2 1/2" YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN. NJ 08104, OR HAVE IT SHIPPED VIA UPS. SHIPPING CHARGES ABOVE, 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 1:00. FOR FREIGHT, PLEASE WHEN YOU PAY TELL US IF YOU ARE A BUSINESS OR RESIDENTIAL ADDRESS. BUYERS NEEDING FREIGHT QUOTES, PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. THANKS 200 LBS WITH SKID. BLUE O-1 RY R.
|
|
ALL IN EXCELLENT CONDITION! Tested ~ Functions Perfectly! TMC 4' x 7' x 4.375" Optical Table Model: 78 Series Clean Top II ~ Max Isolation Rated.25" 20 Sealed Holes on 1" Grid Includes: Newport Self Level Pneumatic Isolation Bench With Casters This Is A Very Nice Set Payment and Shipping Terms: Buyer must make contact within 24 hours of auction end to arrange payment and shipping. Payment must be received within 4 days of auction closing. Buyer pays actual shipping cost or buyer may arrange pick up/ shipping ~ Forklift on site(We do not charge handling or loading fees) Accepted Forms of Payment Within the 50 US States: COMPANY CHECK. CASHIERS CHECK, MASTERCARD, VISA, BANK WIRE TRANSFER Accepted Forms of International Payment: BANK TO BANK WIRE TRANSFER*Items Subject ... moreTo Walk In Sale*
|
|
You are considering a large Nadustco Rotary Airlock Valve. This item is used. But appears to be in good overall condition. We have run this airlock here and it seems to operate as it should. We have not tested it under load, so it is being sold"as is" It does show normal wear from usage and it has light to moderate surface rust on the bare metal parts from sitting unused. The rubber paddles are in fair condition. Mfg By: Nadustco A division of National Flow Pipe& Mfg. Model Number: Unknown Inside Inlet/ Outlet Flange Dimentions: 28" X 24" Outside Inlet/ Outlet Flange Dimentions: 32-1/2" X 28-1/2" Bolt Hole Centers on Flange: 5" Drive Motor: Baldor 5 HP. 1725 RPM, 208-230/460 Volt, 3 Phase(currently wired for 230V) Gearbox Drive: Falk Shaft Mount reducer. ... moreModel 1207J-24A. Ratio: 23.38:1 Approximate Overall Dimentions: 64" Wide X 39" X 38" Tall Shipping Weight: 2.150 Lbs SHIPPING: Buyer to pay actual shipping cost via LTL carrier from Muscle Shoals. AL 35661. Or, you are more than welcome to pick the item up here. Please send us your zip code and address type, commercial or residential, and we will be happy to obtatin a shipping quote for you. We will also be happy to combine shipping on multiple items. Please contact us for combined shipping quotes. PAYMENT: Paypal If you have any other questions please feel free to contact us. You may do so by using the"ask seller a question" form on this listing. Or. Call us at(256) 386-9808, Monday- Friday, 8:00 to 4:30, CST. Thanks for looking and Happy Bidding. Be sure to Check out our other items for more new and used surplus items.
|
|
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. CLICK HERE TO SEE OUR OTHER ITEMS FOR SALE ON EBAY ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED SAFETRAN 070640-3DX MODEL"S" GATE MOTOR. 12 VOLT DC. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 55 lbs. All items are sold"as is" Unless described as"new" above. Items are used. We do not have the facilities to test most ... moreof these items. You are only buying the item(s) pictured/described. ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request. THANK YOU FOR YOUR COOPERATION. This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion and appropriate feedback will be left. Please be sure to enclose a shipping address(street address) EBay ID number, and preferred shipment method if applicable. The total due is always equal to the total of 1) the agreed amount of the item and 2) the actual shipping costs and 3) a $5.00 domestic. Or a $10.00 international, packaging and handling fee. The complete amount must be SENT VIA PayPal. PayPal payments must be made to terrycanarsky@hotmail.com. PLEASE NOTE: The actual shipment of your item(s) may take anywhere from 1 to 10 days depending on such factors as the item's weight. Holidays, weather, etc. plus
|
|
THIS IS AN ARDEL KINAMATIC. MANUAL) ROTARY POSITIONER WITH A 2" +_ APPERTURE. IT HAS A TAPPED.25/ 20 HOLE IN THE END OPPOSITE THE MIC AND ONE ON THE SIDE TO THE LEFT OF THE MIC. AS WELL, IT HAS FOUR UN TAPPED HOLES THROUGH THE FACE AT APPROX. 2" X 3.125" ON CTR. AND HAS AN APPROX. MOVEMENT OF.5 DEG. PER ROTATION(OF THE MIC. THE FOOTPRINT IS 4.00" X 3.25" PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION END. THIS ITEM WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE" LOWER" 48 STATES. PROVIDING IT IS PURCHASED AT THE" BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN ... moreTHE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE. ALL"BEST OFFER" AND INTERNATIONAL SALES ARE"AS-IS"
|
|
GH POSITIVE DISPLACEMENT ROTARY PUMP GHP-2020RV WITH MOTOR Description- ME INVENTORY LOCATION:PS1 3-3 This auction is for: GH POSITIVE DISPLACEMENT ROTARY PUMP GHP-2020RV WITH MOTOR AND COUPLING Product Description: YOU ARE PURCHASING 1 USED GH POSITIVE DISPLACEMENT ROTARY PUMP GHP-2020RV WITH MOTOR AND COUPLING G& H Positive Displacement Pump. Model: GHP-2020. S/N: 87-7-2051. Flow rate for new pump is 70 gpm with required horsepower. Rotary lobe. Pumps have been designed for use on wide ranging applications within the Brewing. Dairy, Food, Pharmaceutical, and Chemical industries. The smooth, slow action is ideal for products such as creams, gels, emulsions, aerated mixtures, delicate cell structures and organic solids in suspension.2" INTAKE/OUTTAKE FITTINGS. SPECS ON MOTORS. SEW-EURODRIVE ... moreHELICAL RX SERIES GEAR MOTOR. RX81DT13284, S.O: 890004071 8 01 09 001. INPUT RPM: 1730. OUTPUT RPM: 677, HP: 7.3, TORQUE: 690 LB IN. RATIO: 2.57:1,SERVICE: CL-1, MTG POS. B3. SEW-EURODRIVE MOTOR DFT13284. 3 PHASE, S.O. 890004071 8 01 89 001. V: 230/460. AMP: 19.2/ 9.6, 60 HZ, DESIGN: B, S.F: 1, INS CL. B, 1730 RPM, AMB: 40 °C. DUTY: CONT. HP: 7.5 http:www.arrowconveyor.com/products/components%20&20replacement%20chain/motor%20&20drives/MillionReasonsProductOverview.pdf IF YOU REQUIRE ANY FURTHER INFORMATION ON THIS ITEM PLEASE INQUIRE. WE DO NOT SHIP FREE ON FREIGHT ITEMS. Unfortunately the Ebay shipping calculator can often overcharge for shipping especially on smaller items. Please feel free to contact us for an accurate shipping quote or request an alternate shipping method. We ship FedEx and USPS as well as UPS. We will also be glad to ship against your UPS or Fedex account. We combine shipping costs wherever possible. Ready to be shipped: For the most accurate information please look at the pictures provided: All items that have been listed were obtained from a Industrial environment and have not been tested. We try to the best of our ability to provide an accurate description of each item that is bei
|
|
|
Inventory# SD2165 Manufacturer: New Holland Model# K24 Basket Size: 12" x 12" HP: 1 Serial# 890639 Heat: Electric Volts: 440 Amps: 4.2 Phase: 3 Max Load: 75 Basket Speed: 825 Foward and reverse with timer. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Inventory# DUS2038 Manufacturer: Filter 1 Model/Catalog# PFV12-3D CFM: 6600 Serial# 00-05-126 HP: 20 Ultra efficiency. Continuous duty. MERV 15 efficiency. Power-pulse reverse-jet cleaning. 12 cartridges. 3000 square foot filter area. 230/460 volt. For shipping and handling arrangements. Please call Surplus Industrial Supply.com@ 616-451-4100 or toll free@ 888-451-9877.
|
|
|
4000 gallon single wall steel storage tank. Has agitation blades and flow meter. Selling as-is. Item must be paid in full with cashiers check or cash before item is removed from site. Buyer responsible for loading and removing off site.
|
|
|
Used in working Condition* Looks nice* Fristam pump FPX3542-195(2.5"X3" Please see pics for details* Shipping quote is for US only(lower 48 states) Thank you Posted with
|
|
ITEM# 11762 SCHWITZER DUROFLOW ROTARY BLOWER- 4.5 X 4 CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. ... moreWe must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 07327 USED 150 HP US ELECTRICAL MOTOR- 445T FRAME 1786 RPM. 460 VOLT, 169 AMPS, 3 PHASE, 60HZ. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. ... moreHowever. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 07317 USED INDUSTRIAL MAGNETICS 8" SQ. SELF-CLEANING GRATE MAGNET ALL STAINLESS STEEL CONSTRUCTION. 8" SQ. FLANGED WITH 14.0" HEIGHT. DESIGNED FOR GRAVITY DROP THROUGH INSTALATION. COMES WITH THREE 1"Ø BAR MAGNETS(WILL ACCEPT SEVEN BARS TOTAL) ACTUATED BY TWIN PNEUMATIC CYLINDERS WITH FULL GUARD, CONTROL VALVE, REGULATOR AND LIMIT SWITCHES. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on ... moreyour entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e558df070-0xfe-
|
|
ITEM# 07401 USED 3/4 HP RELIANCE VARIABLE SPEED DRIVE INLINE CONFIGURATION. SINGLE OUTPUT SHAFT WITH SPROCKET. MAX. INPUT HP: 0.75" MAX. INPUT SPEED: 1800RPM. 3/4 HP, 1725RPM, 230/460VOLT EXPLOSION PROOF RELIANCE MOTOR. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means ... moreplease contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e558df02e-0x103-
|
|
ITEM# 07324 USED PFENING 10" BLOW-THRU ROTARY AIRLOCK FEEDER- NO MOTOR MODEL 10 C. CAST IRON BODY AND END PLATES. SOLID CARBON STEEL OPEN-ENDED ROTOR FOR STEADY FEEDING BULK MATERIAL INTO A 2"Ø PNEUMATIC CONVEYING LINE. CHAIN-DRIVEN WITH SPROCKET. FEEDER HEIGHT FROM BASE TO INLET FLANGE: 14.75" ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay ... moreNow button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 02113 USED 10 CUBIC FOOT PEABODY SOLIDS FLOW PORTABLE BIN 24" DIAMETER X 9" STRAIGHT SIDE X 18" LONG CONE MADE OF WELDED 1/8" THICK CARBON STEEL. COMPLETE WITH HINGED LID. SMALL WAM ELECTRIC VIBRATOR, 12" DIAMETER BIN ACTIVATOR ON OUTLET; MOUNTED ON STEEL CART WITH WHEELS. EXCELLENT CONDITION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use ... morethe Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 07323 USED PFENING 10" BLOW-THRU ROTARY AIRLOCK FEEDER- MODEL 10C CAST IRON BODY AND END PLATES. SOLID CARBON STEEL OPEN-ENDED ROTOR FOR STEADY FEEDING BULK MATERIAL INTO A 2"Ø PNEUMATIC CONVEYING LINE. POWERED BY A 1/2 HP, 115/ 230 VOLT, 1725RPM, GENERAL ELECTRIC AC MOTOR. CHAIN-DRIVEN THRU A DAYTON 57.5:1 INLINE GEAR REDUCER. FEEDER HEIGHT FROM BASE TO INLET FLANGE: 14.75" ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be ... moreeligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 11763 USED 40" X 120" TWO DECK ROTEX SCREENER MODEL 82 P&C PELLET AND CRUMB S/N R300684. WOOD COVER. WOOD SCREEN FRAMES. CARBON STEEL BOX& PAN. 3 HP TOSHIBA MOTOR. 1735 RPM, 230/460 VOLT, 182T FRAME. V-BELT DRIVE WITH GUARD. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish ... moreto pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 00538 USED ITT MARLOW VERTICAL- IN-LINE SELF-PRIMING CENTRIFUGAL PUMP- 2HP ITT MARLOW MODEL# 20EVP-17A SER# 0194 SPEC# 0931200. MOTOR GE. 2 HP 230/460/3/60/ 3450 RPM FRAME 145TC 2" INLET AND OUTLET. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact ... moreus to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
We have a Good Used Semco Rotary Air Lock MODEL 0035-24-CI Inlet/Outlet measure 14" x 14" Material is Cast Iron Input shaftis 1 1/2" in diameter Overall dimensions are 18" x 18" x 22" H*THIS ITEM IS LOCATED IN Darlington. South Carolina* Thanks for Looking and Good Luck! Any questions. Feel free to email. Be sure to check out the other items in our store! New Items listed regularly Add us to your favorite sellers! International Process Plants IPP buys and sells complete process plants and individual pieces of equipment. We specialize in complete processes and the following types of equipment: Boilers. Briquetters, Centrifuges, Dryers, Evaporators, Extruders, Fermenters, Filters, Glass-Lined Equipment, Heat Exchangers, Kilns, Mixers, Plants/Processes, Reactors ... moreand Tanks Global Suppliers of Quality Used Process Plants and Equipment Let us know what plants and equipment you have for sale
|
|
|
Used- Alfa Laval NX-418 Base Assembly. Carbon Steel. ref# 43283012 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
ITEM# 11447 4" DIA. X 11'6" LONG STAINLESS SCREW CONVEYOR. PORTABLE INCLINED. TEST RUN VIDEO ON FILE. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept ... morePersonal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
Accu-Rate 3M DL1051P FRONT AND BACK, 250 FT LAMINIATION ROLLS, APPLICATION: BANNERS. POSTERS AND SIGNS If you have any questions. Please feel free to email me. Item is sold as-is. Shipping: Insurance optional· Item will be Shipped– Sellers choice or by Buyers request· Extra care will be taken to ensure safe transport. Local Pickup is available. Payment to be made at time of Pickup. I Ship to the United States(lower 48) ONLY. Item will be shipped ASAP. After cleared payment is received. Payment: I will accept Pay Pal only. Payment must be made within 24 hours. Thank You Seller's payment instructions We accept Pay Pal only. Payment must be made within 24 hours. Once cleared funds are received. It will be shipped. Thank you. If item is to be picked up locally. Please contact us ... moreto make arrangements for pick up. Cash payment to be made at time of pick-up. Thank you! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Alfa Laval Sanitary Fittings Model: 53081-08-SR3004-1-316L These items were salvaged from an industrial warehouse and have never been used or tested. Minor wear. We are always available to answer any questions. So please feel free to contact us! Shipping: All items are packaged and shipped via USPS. International shipping charges do not include customs or brokers fee's. Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e60db2778-0x103-
|
|
ITEM# 11769 USED 48" VIBRO-SEPARATOR SINGLE DECK STAINLESS STEEL MODEL LS-1200-1S MANUFACTURED BY CE INTERNATIONAL TRADING CORP. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware ... morethat we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e637ce512-0xf4-
|
|
ITEM# 11771 USED 48" CE INTERNATIONAL TRADING CORP VIBRO-SEPARATOR MODEL LS-1200-1S STAINLESS STEEL CONTACT PARTS. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do ... moreaccept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
ITEM# 11770 USED 48" CE INTERNATIONAL TRADING CORP VIBRO-SEPARATOR. STAINLESS STEEL MODEL LS-1200-1S. SINGLE DECK. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do ... moreaccept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
THIS IS A USED SYNRAD UC-2000 LASER CONTROLLER. IT WAS MANUFACTURED IN 2008 AND IS IN EXCELLENT VISUAL CONDITION! PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WIILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES PROVIDING IT IS PURCHASED AT THE"BUY ME NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM IS SUBJECT TO PRIOR SALE. ALL INTERNATIONAL AND"BEST OFFER" SALES ARE"AS-IS" 1t.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e637ce5bc-0xf7-
|
|
ITEM# 07438 DODGE ROUND FLANGE- TIMKIN 42325DEE ROLLER BEARING- TYPE E 4-BOLT CAST IRON HOUSING. PRICED EACH, CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please ... morebe aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Used-Chester Jensen Kettle. 500 Gallon, 304 Stainless steel, Model M70N50CC, Serial number 8411-P ref# 45045003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used-Tank. 5,000 Gallon, Stainless steel, 8' 5" diameter 157" straight side. ref# 45045002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Used- DCE Dalmatic Envelope Type Reverse Jet Dust Collector. Approximate 430 Square Feet Filter Area, Carbon Steel. Housing 39" wide x 63" long x 99" tall x coned bottom. Top air inlet, top air outlet with a 2 hp, 3/60/460 volt, 1730 rpm blower. 9-1/2" x 9-1/2" center bottom outlet with a 14" diameter ring. Mounted on 4 legs. ref# 90235 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|