|
|
Order by: |
0 bids $14.00 Shipping
Condition: New Location: Detroit, United States
Cleco 48EAE52S231 Corded Electric Transducer Control Right Angle Nutrunner Torque Range 8.1-38.4ft lbs
0 bids Free Shipping
Condition: Used Location: Lockport, United States
This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Buy It Now
Free Shipping
Condition: New Location: , United States
ItemWeight: 0.75.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
XL GearBox Double Box Ratcheting Wrench – 21mm. Zero degree offset for superior access even for recessed fasteners. Up to 40% longer to access those hard to reach fasteners. Ratcheting box end for maximum productivity.
0 bids Free Shipping
Condition: Used Location: Ovalo, United States
Rockwell Air 6000RPM Screw Runner. All etchings have been removed and items have been connected to an air source and work. Part number 42D 101A/B. Condition is "Used". I’m not getting rich when these sell, just want them out of my shop. Open to offers, just message me. Shipped with USPS Priority Mail.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
Committed to bring you the best products on the market. High quality components.
0 bids Free Shipping
Condition: Used Location: , India
0 bids Free Shipping
Condition: New – Open box Location: Rome, United States
NEW NO BOX AS PICTURED .
Buy It Now
$9.46 Shipping
Condition: New Location: Hibbing, United States
1/2" Drive x 12mm Deep - 12 Point Grey Pneumatic sockets are designed for tool users.. Made of high quality alloy steel.. Engineered specifically for use with tools.. Benefits of the GP Socket “High Torque” drive: Increased strength, easier access to tight areas, and reduced wear.. 12-Point . 1/2” Drive. 12mm Deep. Drive End 22mm. Socket End 19mm. Bolt Clearance Depth 66mm. Hex Depth 14mm. Length 83mm. Warranty 2112MD.
0 bids Free Shipping
Condition: Used Location: Glassboro, United States
Small orders are no problem. Joseph Fazzio, Inc. Surplus Division. Weight: 5 lbs. Be sure to add us to yourfavorites list ! Your Best Work Starts Here™. Lot# AA115 L2. Joseph Fazzio Inc.
Buy It Now
Free Shipping
Condition: New – Open box Location: Clover, United States
AIR PNEUMATIC RATCHET WRENCH. 3/8" DRIVE. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. USED, but in good working condition. Removed from closed plant.
Buy It Now
$21.49 Shipping
Condition: New Location: Gräfrath, Germany
Item No.: 10112132EAN: 4033592035118SW-Stahl 01415L brake line wrench, 6 piecesAmong other things Particularly suitable for working on: Brake lines master cylinders calipers wheel brake cylinders Air conditioning systems Hydraulic lines Hexagonal profile: The brake line wrench adapts better to the screw connection thanks to its special hexagonal profile and is therefore gentle on materials Technical data: Hexagon Chrome vanadium steel Practical roll bag Wrench sizes: 8 x 10 mm, 9 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 18 mm, 17 x 19 mmScope of delivery: 01415L-1 - Brake line wrench, 8 x 10 mm 01415L-2 - Brake line wrench, 9 x 11 mm 01415L-3 - Brake line wrench, 12 x 13 mm 01415L-4 - Brake line wrench, 14 x 15 mm 01415L-5 - Brake line wrench, 16 x 18 mm 01415L-6 - Brake l.
Buy It Now
Free Shipping
Condition: Used Location: New Ringgold, United States
Tested and working. Great shape.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufacturer Part Number: 4X154. More Information. What's Next?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. Industrial Manufacturers.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufactured by URYU. Special Instructions?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. Manufacturer Part Number: ALPHA-45D.
0 bids Free Shipping
Condition: Used Location: Rochester, United States
Item specifications .
Buy It Now
Free Shipping
Condition: New Location: Trenton, United States
Husky 683 367. If it is new it must still be new, unopened, sealed and unused.
Buy It Now
$8.63 Shipping
Condition: Used Location: Joshua, United States
WITH SPEED ADJUST REVERSEABLE.
0 bids Free Shipping
Condition: Used Location: Nagardas Road S.O, India
Used and in good working condition. Kindly refer all images.
Buy It Now
Free Shipping
Condition: Used Location: Clover, United States
MODEL: 93121. AIR PNEUMATIC RATCHET WRENCH. 3/8" DRIVE. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. USED, but in good working condition.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
Number of Points: 12. Box End Thickness: 1/8 in. Box End Width: 21/32 in. End A Thickness: 1/8 in. End B Thickness: 1/8 in. Fastener Size: 7 mm.Offset Angle: 15 deg.Open End Thickness: 1/8 in. Open End Width: 11/16 in.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufacturer Part Number: ALPHA 60MC. Manufactured by URYU. Special Instructions?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive.
0 bids $15.00 Shipping
Condition: New – Open box Location: Beltsville, United States
URYU US-4 PNEUMATIC SCREWDRIVER. DIRTY ON SURFACE BUT IT HAS NEVER BEEN USED.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufactured by URYU. Manufacturer Part Number: UL-40DMC. Special Instructions?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive.
Buy It Now
$9.46 Shipping
Condition: New Location: Hibbing, United States
1/2" Drive x 14mm Deep Made of high quality steel (chrome-molybdenum). Engineered specifically for use with tools, using the most up to date industrial specifications. Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength. Warranty. Each socket features high torque drives. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost. 2014MD.
0 bids Free Shipping
Condition: Used Location: Ionia, United States
Lubbering Right angle head A-NR:80633304 S-NR: 807690. Ingersoll Rand D Series DC Nut Runner 1755 Rpm 180-270Nm Lubering Right Angle Head With Gear Reduction and a Lubering Right angle Head. Cable # DEA120-249R Ref 005.
0 bids Free Shipping
Condition: New Location: Brookfield, United States
T&A Part #327-0909.
Buy It Now
$9.46 Shipping
Condition: New Location: Hibbing, United States
1/2" Drive x 18mm Hex Driver Grey Pneumatic sockets are designed for tool users.. Made of high quality alloy steel.. Engineered specifically for use with tools.. Benefits of the GP Socket “High Torque” drive: Increased strength, easier access to tight areas, and reduced wear.. 1/2” Drive. Metric Hex Driver. 18mm Hex Driver . Drive End 25mm. Bolt Clearance Depth 51mm. Hex Depth 25mm. Length 75mm. Warranty 2918M.
Buy It Now
$9.46 Shipping
Condition: New Location: Hibbing, United States
1/2" Drive x 28mm Deep Made of high quality steel (chrome-molybdenum). Engineered specifically for use with tools, using the most up to date industrial specifications. Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength. Warranty. This socket features high torque drive. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost. 2028MD.
Buy It Now
$9.46 Shipping
Condition: New Location: Hibbing, United States
Heavy Duty Strap Filter Wrench A Heavy-Duty, Heat Treated Alloy Steel Yoke and Strong Web Strap.. Use with 1/2 drive to remove or install filters and other objects up to 6-1/2 in diameter. 3-5/8 long yoke fits into tight areas. 60200.
0 bids Free Shipping
Condition: New Location: Fredericksburg, United States
For sale one YOKOTA TKa90 torque tool. This is a new open box item with an extension cable.
0 bids Free Shipping
Condition: New – Open box Location: Mount Sterling, United States
Manufactured by BANNER ENGINEERING CORP. Special Instructions?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. Manufacturer Part Number: 10MM-8MM.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
V-8 Tools V8T7711 SAE. 38in. 14 Piece Crowfoot Wrench Set. 14 Piece Crowfoot Wrench Set - SAE 3/8 to 1. 3/8 drive. Includes sizes: 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16.
0 bids Free Shipping
Condition: New – Open box Location: Sacramento, United States
Chicago Pneumatic balancers are premium quality developed to shift the weight of the tool away from the operators arm. They eliminate stress and fatigue and help improve productivity. Ideally suited for heavy tools and/or repetitive tasks.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
U-Type Wrench for 70720Specifications. Size: 13 mm.Weight: 0.06 lbs.
0 bids Free Shipping
Condition: Used Location: San Antonio, United States
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
Steel Grip PSO40 40 Piece Ratchet & Socket SetFeatures. Metric or SAE SAEMetric. Number of Pieces 40 pc . Material Steel. Drive Size 14 in 38 in Drive in . Product Type Ratchet and Socket SetMetric or SAE: SAE/MetricNumber of Pieces: 40 pc.Material: SteelDrive Size: 1/4 in. , 3/8 in. Drive in.Product Type: Ratchet and Socket Set
0 bids $13.00 Shipping
Condition: Used Location: Palm Harbor, United States
~ Uryu UX-?. 3/8” Pneumatic Wrench~.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufactured by YOKOTA. Manufacturer Part Number: OPMW-YED-90. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. Industrial Manufacturers.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufacturer Part Number: UL60MC. Manufactured by URYU. Special Instructions?. What's Next?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
Irwin Industrial Wrench Adjustable Set 2Pc 2078700Features. Durable chrome vanadium construction is super sturdy.. ProTouch grip provides maximum torque and comfort and is slip resistant.. Wrenches have English and metric scales extra-wide capacity and a hang hole for easy wall storage.Durable chrome vanadium construction is super sturdy.ProTouch grip provides maximum torque and comfort and is slip resistant.Wrenches have English and metric scales, extra-wide capacity, and a hang hole for easy wall storage.Satisfaction Ensured.Produced with the highest grade materials
0 bids Free Shipping
Condition: Used Location: Cambridge, United States
USED, Uryu ALPHA-50D Pulse Air Impact Wrench, 1/4" Hex Drive.
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
K Tool International KTI41831 31mm Metric Combination WrenchWell merchandised. Brand and part number etched on each wrench. New products displayed well. Less space, with more coverage. Includes Metric combination, short combination, and high polish wrenches. Length: 17. Width: 2.5.Well merchandised.Brand and part number etched on each wrench.New products displayed well.Less space, with more coverage.Includes Metric combination, short combination, and high polish wrenches.
Buy It Now
$9.46 Shipping
Condition: New Location: Hibbing, United States
14 PIECE SAE ANGLE HEAD WRENCH SET 14 PC SAE Angle Head WR Set . Radius V-Groove design creates an anti-slip while also preventing round-off.. 15 and 60 degree angled heads provide greater access into tight work areas to complete the job easily.. Chrome plating for strength and the prevention of rust, corrosion and deformation.. Heat treated and tempered to meet or exceed ANSI Standards for strength.. Sizes stamped on both sides for fast identification.. Set comes with a durable canvas pouch for easy storage and transportation. 9914A.
0 bids Free Shipping
Condition: Used Location: Mount Sterling, United States
Manufactured by ATLAS COPCO. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. More Information. What's Next?. Special Instructions?.
0 bids Free Shipping
Condition: Used Location: Grand Rapids, United States
Atlas Copco ETD S4-04-I06-CTADS Torque Tool Nutrunner, 1/2 in, Square Driver. Manufacturer Part Number: ETD S4-04-I06-CTADS. Manufactured by ATLAS COPCO. What's Next?. More Information. The product images shown are of the exact product you will receive.
0 bids Free Shipping
Condition: New – Open box Location: Mount Sterling, United States
Manufactured by NAC -NAGAHORI INDUSTRY CO. Manufacturer Part Number: 304C. What's Next?. Special Instructions?. More Information. The product images shown are of the exact product you will receive. IMS has a specialized resale program for manufacturers!
Buy It Now
Free Shipping
Condition: Used Location: Las Vegas, United States
0 bids Free Shipping
Condition: Used Location: Salem, United States
0 bids Free Shipping
Condition: New – Open box Location: Grand Rapids, United States
Manufactured by CORETEC. Coretec CRQ-2M Quest AC Nutrunner Cable, 2M Cable Length. What's Next?. Special Instructions?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive.
0 bids Free Shipping
Condition: New – Open box Location: Grand Rapids, United States
Manufactured by CDI TORQUE PRODUCTS. New - Missing Box -Part has QJD12A-80 K square drive ratcheting head attached. Manufacturer Part Number: 50T-I. What's Next?. Special Instructions?. More Information.
0 bids Free Shipping
Condition: Used Location: Robertsdale, United States
When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Let us know what’s going on. Warranty Information.
0 bids Free Shipping
Condition: New – Open box Location: Mount Sterling, United States
Manufacturer Part Number: ALPHA 60MC. Manufactured by URYU. Special Instructions?. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive.
Buy It Now
Free Shipping
Condition: For parts or not working Location: Lebanon, United States
DESOUTTER Air Angle Wrench SRB10-0 201482. Sold as is, untested. Not sure if works or if anything is broken. Marks, scratches, and grease.
0 bids Free Shipping
Condition: Used Location: South Gate, United States
Cleco Angle Nutrunner 24RAS13AM3. S/N X-05581. Tested before posting, and it still works.
Buy It Now
Free Shipping
Condition: New Location: Melville, United States
PRO-SOURCE For Use with 3/4 Impact Wrench 5540003323JP, Rebuild Kit Rear End Plate 45-405714, Front End Plate 45-405719, Air Regulator 45-405721, 2 Hammer Pins 45-405117
Buy It Now
Free Shipping
Condition: New Location: Lakewood, United States
K Tool International KTI72143 .38in. Drive Click-Style Torque WrenchAchieve the proper torque with KTI's 3/8" drive click-style torque wrench. Torque specifications: 10-100 ft./lbs. Torque wrench is extremely accurate and easy-to-use. Simply adjust the torque specification on the wrench by releasing the red knob and turniPackage Quantity: 1Excellent Quality.Great Gift Idea.Satisfaction Ensured.Produced with the highest grade materials
0 bids Free Shipping
Condition: Used Location: Grand Rapids, United States
Manufactured by WIHA. Manufacturer Part Number: 362 T9 X 60. What's Next?. More Information. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive.
Buy It Now
Free Shipping
Condition: New Location: Round Rock, United States
Everything in the pictures is included. Anything not in the pictures is not included.
0 bids Free Shipping
Condition: New – Open box Location: Дніпро, UA
Manufactured in England. Very high quality! 100% original NEW ! Original pictures!
|
|
|
|
ATLAS COPCO ½" SHUTOFF NUTRUNNER. 70-175 NM, 50-130 FT-LBS, TWO SPEED(FAST RUNDOWN) NEW REACTION BAR INCLUDED. JUST MFR RECONDITIONED. MODEL NUMBER LTP51 H008-13-RE MAX TORQUE 175 NM. 130 FT-LBS 550 RPM RUNDOWN ½" SQ DRIVE FACTORY PRICE $4686.50 THIS NUTRUNNER IS SUPPLIED STANDARD WITHOUT-RE(REPORTING) THE REPORTING CONNECTION CAN BE REMOVED AND PLUGGED IF NOT NEEDED. THE PICTURES ARE OF THE ACTUAL NUTRUNNER YOU WILL RECEIVE. EXACTLY AS YOU WILL RECEIVE IT. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. INGERSOLL RAND 3RLN2C5 1/4" PNEUMATIC RATCHET ... more700RPM This auction is for one Ingersoll Rand 3RLN2C5. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an additional handling fee for the packing of the item. We will only ship to locations in the United States using our shipping account. If you purchase somethi
|
|
|
ATLAS COPCO 3/8" REVERSIBLE SHUTOFF 90º ANGLE WRENCH. JUST RENEWED BY ATLAS COPCO. 23–53 Nm; 17–39 FT-LB 400 RPM MODEL LTV36 SR004 10 REPLACEMENT COST $3267.16! THE PICTURES ARE OF THE ACTUAL TOOL YOU WILL RECEIVE. EXACTLY AS YOU WILL RECEIVE IT. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
You are buying a used Gardner Denver 9/16" 12 point pneumatic box wrench with a size C3 air motor. This item ships free to all 50 states. 2. F2. International shipping. USPS ONLY, is usually available for items weighing less than 20 pounds and can fit in a Flat Rate Box or envelope. Additional charges will apply. Paypal sales only. Please e-mail for confirmation before bidding or buying. Please wait for an invoice before paying. Buyer is responsible for any taxes, duties, customs or other charges. I DO NOT falsify customs forms and will not change declared selling price. No third party shipping. Most of my items ship free via UPS Ground(Parcel Post to P.O boxes) or USPS Priority Mail Flat rate, First class. Expedited or overnight shipping is available for whatever the increased shipping ... moreamount, thru my UPS or USPS account only. Most items ship within 24hrs of payment receipt. All communications about items listed on EBAY should go thru EBAY emails. Other email accounts or methods may not be checked on a regular basis. We will be able to respond much quicker and address any shipping or defective product problems in a more timely manner. Freight shipping is available for large items to the lower 48 states only. Please e-mail with Zip code, Business name, and forklift or loading dock availability for a freight quote before bidding/buying. Residential liftgate service will incur an upcharge determined by the trucking company. Please email with any problems, damaged or lost shipments or DOA items as soon as possible. We will always do our best to make sure you are a satisfied customer and will return all positive feedbacks.
|
|
This is a precision industrial pneumatic pistol made by Atlas Copco. The part number is EP18PTS450-HR20-RE. We have SEVEN available; please let us know if you need more. 3/4" Square Drive. Torque range is 225-410 Nm(165-302 ft.lbs. Weight is 9 pounds. We cannot test for torque output; selling as-is. Please feel free to call Tim if you have questions 214-707-8665. Perfect choice for quick. Inexpensive tooling for your short-term projects. We have more available. Please let us know if you need a different quantity. We have other Makita Cordless items currently up for auction. All brand new. Please bid with confidence with us; our positive feedback will speak volumes. Thank you for shopping and good luck bidding! Bidding: Please. If you’re new to eBay and don’t have your Paypal set up yet, ... moreor don’t intend to pay right away, please don’t bid on this item. Payments: We accept Paypal(preferred) No personal checks. Please. Paypal payments must be received within 3 days of auction's close. Shipping: Let’s talk about shipping. We ship via FedEx Ground so we have a REAL tracking number that shows the ACTUAL progress of your package. We will link your email address to this tracking number when we ship. So you can watch also. Shipping quoted based on the Lower 48 States. Hawaii and Alaska buyers should check for shipping quote prior to bidding. We ship to CONFIRMED ADDRESSES ONLY. On occasion, we will ship via FedEx 2-day shipping at our option. We will use USPS only when we have to. As their tracking system is a joke. Shipping for this item will be flat rate. Which includes insurance and a tracking number. We can combine shipping if you like, but you’ll have to tell us what other items you’re bidding on, watching, or won so we can quote combined shipping costs. Shipping typically takes place the day after payment is received or cleared. We will ship via insured FedEx ground in most cases and can provide the tracking numbers. FedEx ground will take 1-3 days to reach most points in the lower 48 states. International
|
|
Please Read Item Description& Our Terms and Conditions Below Before Bidding! Sturtevant Richmont Programmable Torque Verifier Used/Tested- see auction description Sturtevant Richmont Programmable Torque Verifier Power tested and went through some options No cables or other parts to test further Lock Key Not Included. Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Take A Moment And Visit Our Ebay Store@ CTR Surplus USA Sales Only Since we deal in surplus our auctions do NOT fall into eBay's black and white idea of Used and Not Working item categories. Some items we can only partially test because we don't have all of the item parts or know how to fully ... moretest. But it does not mean they don't work. We list our auctions as well as we can, so please bid accordingly. CTR Surplus Listing Terms All items are SOLD AS-IS Unless otherwise stated in the auction. Some exceptions: Auctions stated Tested-Working and New(NOT New- Old Stock) will be refunded if the item(s) has a problem(as in- not working properly or at all) But the item must be returned at the Buyer's cost, and we must be contacted within 14 days of delivery. The item must be what we sold 100% serial numbers, model numbers, all included parts from the auction, size, shape, color, what was pictured/mentioned, etc. Also shipping from the auction is not refunded. All auctions must be paid for with in 10 Days of end of auction and all end of auction notifications will be sent to your registered Ebay email address. Shipping If you select a higher grade of shipping other than UPS Ground. Please e-mail me because eBay does not notify us of the change! We ONLY use UPS and we do not use UPS accounts! We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. It is the buyer's responsibility to contact us on combined shipping. Most items will
|
|
Some light marks on the housing. But has seen limited use. Still in very good condition. SAFETY FEATURES ␣ Torque reaction is virtually eliminated to reduce wrist injury to operator and create ergonomic working environment. ␣ Optimum torque accuracy and repeatability. ␣ Uniform fastening torque with narrow mean-shift torque for hard and soft joints thanks to a unique torque control shut-off device(no timer) ␣ External one-touch adjustment for automatic shut-off. ␣ Uryu quality and design. SETTING OF TIGHTENING TORQUE AIR SUPPLY LINE SIZE: 3/8” to 1/2” drive should use 3/8” ID line and 3/4” to 1” drive should use 1/2” ID line. AIR PRESSURE: Use air pressure 5.0- 6.0 Kgf/cm 2(70-85 PSI) for optimum performance. Caution: Never use higher air pressure to increase the output of the tool. Overloading ... morewill drastically shorten the life of all internal parts. DRY AND CLEAN AIR: Drain daily. And install filter at or near the take-off point to prevent trouble from foreign matter. AIR HOSE AND JOINTS: Use air hose(the shorter. The better) joints, and other fittings of good condition and of proper size to avoid pressure drop. LUBRICATION MAINTENANCE REGULAR OVERHAUL: It is recommended that after every 150.000 pulsing seconds or 180 days the fluid in the tool’s pulse unit be changed. It is also recommended at such time to grease the bearings in the air motor. If the presence of water is noted. It is recommended that a small amount of oil be run through the air motor to wash out any rust residue in the air motor. It is recommended that after every 300.000 pulsing seconds or 365 days that a pulse unit repair kit be installed in the pulse unit. This also allows the inspection of hard parts in the pulse unit. Normal 0 false false false EN-US JA X-NONE Please Read! All Pictures are of the exact item that will be sent to you. No Returns Will Only Ship to Continental U.S
|
|
This Sale is for a Chicago Pneumatic CP-2430 TR05U04 Pistol Grip Air Screwdriver Reversible 500RPM. TESTED by our Lab Technician and works well. Model: CP-2430 TRO5U04 RPM: 500 Made in Sweden SOLD WITH A 14 DAY RIGHT OF INSPECTION Please for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. US. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our ... moreserver which only causes frustration to all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However. USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, or Ve
|
|
Engineering Surplus Supplies& Used Equipment Auction Terms Shipping Policy Return Policy Visit Store Join Newsletter Description Made by Stanley; other Mfg& model# not visible. Stanley Model# F30LR8TA-5 This is a lot of Pneumatic Angle Ratchet Wrench in good condition. Specifications: Drive: 1/2" Hex Stanley Speed: 500 RPM Max Air Pressure: 90 PSI Overall Lengths: 13" 18 1/2" Comes Exactly as shown in pictures. ITEM LOCATION:90016 LOCAL PICK UP FREE INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The above item description may have been taken from the internet for reference about the product. This information is to be used as an information reference only and not as a guarantee by TRINITY SURPLUS. Make Your Offer $249.00- You may be interested ... morein on eBay. PNEUMATIC-TOOLS, USED ITEMS ARE TESTED AGAINST D.O.A. THEY ARE NOT REFURBISHED UNLESS STATED. NOT CALLIBRATED UNLESS STATED. Payment must be received in full within 7 days of the closing sale date. Confirmed paypal addresses are required for items over $200. Payment is accepted via PayPal. Personal check, cashier's check, or wire transfer. Items will be held until full payment is posted and cleared INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The buyer is responsible for all shipping. Handling, and insurance costs prior to shipment. No Insurance Unless stated. Shipping is available to all 50 states. Outer lying territories. Items will be shipped within 4 business days of receiving a cleared payment. Shipments will be carried via UPS. FEDEX, or USPS at our discretion. Insurance and signature confirmation are required for item purchases over $400. Combined shipping is available for items purchased within a 7 day period Returns are accepted within 7 days for items which are DOA or not as described. The buyer must report listing or description errors within 7 days of receipt. The return policy doesn't cover negligence. Abuse, or misuse of items. Items sold on an as is are
|
|
|
Gardner Denver 900 rpm Pneumatic Angle Wrench 1/2" Drive Air Condition: USED IS IN GOOD WORKING CONDITION 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
|
|
|
This auction is for one Matco Tools MT-1755 1/2" Air Impact Wrench. Decent cosmetic condition. Shows normal signs of use, could use some clean up. All seems to be working well. I am selling off a retired mechanic's in-tire tool set. He did write his name on some of them(FYI) Please check out all my auctions He had $90.000 invested over the years. Disclaimers please look at pictures for visual faults. What you see is what you get. If you don't see it's not there. Payment: pay pall is best thank you. Shipping: is to the lower 48 states all other extra( UPS) insurance is included Please allow 2 weeks for delivery. I only ship to the usa if you are from outside the USA please ask before biding Return: within 7 days but there is a restocking fee of $20 Warranty: NONE SOLD AS IS
|
|
System Nobar Wrench/Torque impact Gun 1" Drive D10082 w/Metal L Bar THIS ITEM IS USED AND HAS MANY SCRATCHES AND NICKS. THERE IS A METAL L-SHAPED BAR ATTACHED FROM IT'S PREVIOUS WORKING ENVIRONMENT. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# D10082 OVERALL DIMENSIONS: WIDTH: 19" LENGTH: 25" HEIGHT: 5" SHIPPING WEIGHT: 28 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE ... moreLOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT
|
|
Uryu Seisaku UX T1620 Wrench/Torque Impact Gun 3/4" Drive THIS ITEM IS USED AND HAS SOME COSMETIC WEAR BUT IS STILL IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# UX T1620 OVERALL DIMENSIONS: WIDTH: 11" LENGTH: 12" HEIGHT: 4.5" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE ... moreIS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANU
|
|
Cooper Power Tools Cleco 250PTHFC226 Pistol Grip Torque/Wrench Gun 2200/min 3/4" Drive THIS ITEM IS USED. IT HAS SOME NICKS AND GRIME ON IT BUT OTHERWISE IS IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# 250PTHFC226 OVERALL DIMENSIONS: WIDTH: 10.5" LENGTH: 12" HEIGHT: 5" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER ... moreAND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED
|
|
Cooper Power Tools Cleco 160PTHF256 Pistol Grip Torque/Wrench impact Gun 3/4" Drive THIS ITEM IS USED AND HAS SOME COSMETIC WEAR BUT OTHERWISE IS IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# 160PTHF256 OVERALL DIMENSIONS: WIDTH: 10" LENGTH: 12" HEIGHT: 4" SHIPPING WEIGHT: 12 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT ... moreOF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTI
|
|
|
STANLEY- PNEUMATIC NUTRUNNER- A40LA2TPM-5A3. 460 RPM, 1/2" WITH HANGER, USED, I COMBINE SHIPPING,
|
|
|
2-PCS- STANLEY NUTRUNNER- A32RAACT-7S2. 700 RPM- 3/8" REVERSE, TORQUE ADJUST, USED, I COBINE SHIPPING.
|
|
|
STANLEY- RT ANGLE PNEUMATIC NUTRUNNER- A32LRAACT-7S2. 700 RPM, ADJ TORQUE, 3/8" REVERSE, IN GOOD CONDITION, I COMBINE SHIPPING.
|
|
|
STANLEY-PNEUMATIC NUTRUNNER- GOOD USED CONDITION- A40LA2TPM-5A3. 1/2" 460 RPM, WITH HANGER, I COMBINE SHIPPING.
|
|
This auction is for the following items: SHEAR WRENCH TONE MODEL S-60EZA CASE Shows signs of normal usage. Item shows normal wear with scuffs and scratches. Unit is in working condition. This auction includes everything pictured! WE ARE NOT RESPONSIBLE FOR TYPO’S PLEASE LOOK AT ALL PICTURES CAREFULLY AND ASK QUESTIONS B4 BIDDING* We do not have a history of the products we sell. We make purchases from different sources for resale purposes. Happy bidding J! PLEASE READ the following Terms for COMPUTERS. NETBOOKS, LAPTOPS, IPAD or the likes there of: NORMAL WEAR: Normal wear on a used laptop can be considered minor cover scratches. Minor wear to the keyboard; minor screen scratches/rub marks that have no impact on the picture, etc. We are not responsible for software contents that are left on ... moresuch devices and this includes the operating system. We recommend for you to contact the manufacturer or download a copy of the OEM restore software. BATTERY POLICY for all electronics and power tools. Basically anything that takes a battery. Used batteries are variable. Some last a few minutes. Some last a few hours. It is impossible to test and guarantee each and every battery's length of charge. We test that all batteries hold a charge(in other words are not DOA) Our standard policy is to guarantee that your battery will hold a charge but not the length of that charge. Terms& Conditions: Payment: Payment must be made within 3 days. After which appropriate action will be taken. Payment MUST BE MADE via confirmed US Registered PAYPAL ONLY! WE WILL NOT END AN ACTIVE AUCTION EARLY. HIGHEST BIDDER WINS THE AUCTION! Shipping: We offer free shipping on all of our products unless duely noted. We ship on the following days:Tuesday.Thursday, Friday· We will ship only to a confirmed PayPal address and only in Contiguous U.S. Lower 48 States) Products will be shipped within 3 business days of cleared payment. Items will be carefully and professionally packed to prevent damage in transit. We do not ship
|
|
|
Aro 7212-D Pneumatic in-line pulse driver nut runner screwdriver 1500 RPM
|
|
|
This listing is for 1 Impact Tool. Unit is used. But it does work fine no problems or damage, other than wear from use. Comes as shown, condition is also shown in the pictures. We will ship within the USA ONLY. NO international shipping…don’t ask. We do combine shipping on multiple items. We accept paypal(preferred) If you have any questions or concerns. Please call 256-894-9994 during business hours: 8am-6pm 7 days a week.
|
|
|
CHICAGO PNEUMATIC#3081 SOFTORK 3/8" ANGLE WRENCH 15-25 IN-LB 780 RPM. FROM THE CP CATALOG: WHEN FASTENERS ARE DRIVEN WITH CP AUTOMATIC SHUTOFF ANGLE NUTRUNNERS. THE TOOL, NOT THE OPERATOR, CONTROLS THE INSTALLATION. ALL DRIVING TROQUE CEASES WHEN TORQUE IN THE FASTENER REACHES THE DESIRED VALUE. THE PICTURES ARE OF THE ACTUAL ANGLE WRENCH YOU WILL RECEIVE. THE PICTURES ARE OF THE ACTUAL TOOL YOU YOU WILL RECEIVE. I NTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
|
STANLEY- PISTOL 1/2" DRIVE WRENCH. PNEUMATIC-A40SB-6F3, 400 RPM, USED, I COMBINE SHIPPING
|
|
|
STANLEY- PISTOL-PNEUMATIC NUTRUNNER- WRENCH- 3/8" A40PRB-7 750 RPM, USED, I COMBINE SHIPPING.
|
|
|
Extremely rare 3/4 in drive Stanley nutrunner air ratchet/ impact wrench. This sold new for several thousand dollars! Bid to win. No reserve! Posted with
|
|
|
CHICAGO PNEUMATIC- STRAIGHT PNEUMATIC NUTRUNNER-3016 AM UK. RAM CLUTCH PWR ADJ, 1/4" HEX. REVERSE, USED. I COMBINE SHIPPING.
|
|
|
STANLEY- RT ANGLE PNEUMATIC 3/8" WRENCH. A30LRATA-9PI, USED, REVERSE, I COMBINE SHIPPING.
|
|
|
GARDNER DENVER/COOPER TOOLS Ratchet Wrench Size 3-12. Motor RPM 1200
|
|
|
GARDNER DENVER/COOPER TOOLS Mod.H25NR21C13 Ratchet Wrench 7/16"
|
|
|
GARDNER DENVER/COOPER/CLECO TOOLS Ratchet Wrenches Parts
|
|
|
motor runs smoothly. new inner and outer socket. Plunger and ejection spring FREE SHIPPING!
|
|
|
SIMONDS MACHINE SP–004 SQUEEZE EZE POWER PACK. HOUSING ASSEMBLY, AND CUSTOM JAWS. JAWS ARE INTERCHANGEABLE WITH OTHER SIMONDS JAWS. THE CUSTOM JAWS HAD A SPRING WITH THEM(SEE PICTURE 5) WE DO NOT KNOW THE INTENDED USE OF THESE JAWS. A HANDLE HAS BEEN ADDED TO THE SP–004 TO MAKE IT MUCH EASIER TO USE. REPLACEMENT COST APPROX $815.00 THE PHOTOS ARE OF THE ACTUAL SP–004 YOU WILL RECEIVE. EXACTLY AS YOU WILL RECEIVE IT. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
|
ATLAS COPCO 1/2" REVERSIBLE SHUTOFF 90º ANGLE WRENCH. JUST RENEWED BY ATLAS COPCO. 34–70 Nm; 25–52 FT LBS 250 RPM MODEL LTV37 SR003 13 NEW COST $3411.77! THE PICTURES ARE OF AN ACTUAL TOOL YOU WILL RECEIVE. EXACTLY AS YOU WILL RECEIVE IT. ALL OF THE LTV37 SR003'S COVERED BY THIS LISTING HAVE BEEN RENEWED BY ATLAS COPCO. THEY ALL LOOK THE SAME EXCEPT FOR DIFFERENT MARKS OF USE. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
|
ATLAS COPCO ¾" SHUTOFF NUTRUNNER. 145-320 NM, 105-235 FT-LBS, TWO SPEED(FAST RUNDOWN) REACTION BAR. JUST MFR RECONDITIONED. MODEL LTP51 H004-20 MAX TORQUE 320 NM. 235 FT-LBS 300 RPM RUNDOWN ¾" SQ DRIVE FACTORY PRICE $4686.50 THE PICTURES ARE OF THE ACTUAL NUTRUNNER YOU WILL RECEIVE. EXACTLY AS YOU WILL RECEIVE IT. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
|
ATLAS COPCO REVERSIBLE AUTO SHUTOFF 3/8" ANGLE WRENCH. EXTREMELY CONSISTENT TORQUE. AS YOU SEE IN THE PICTURES: OVER OUR TESTS THE TORQUE VARIED LESS THAN ±2% FROM 118 TO 122 INCH-POUNDS. 7- 15 Nm. 5- 11 FT-LBS 900 RPM LTV28 S009-10 REPLACEMENT COST $2126.95 THE PICTURES ARE OF THE ACTUAL TOOL YOU WILL RECEIVE. EXACTLY AS YOU WILL RECEIVE IT: INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
|
YOU ARE BIDDING ON AN INGERSOLL RAND DEA150-249R NUTRUNNER TORQUE WRENCH MODEL: DEA150-249R REV: 01 D SERIES 395 RPM 90-120 NM ITEM WAS IN GOOD WORKING CONDITION WHEN REMOVED We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or if you would like to pick up this item and save shipping please let us know. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED IN OUR STORE.
|
|
|
ATLAS COPCO AUTO SHUTOFF 1/2" ANGLE WRENCH 40 FT-LBS 55 Nm 440RPM. 30- 55 Nm. 22- 40 FT-LBS 440 RPM LTV36 S005-13 REPLACEMENT COST $2755.25 THE PICTURES ARE OF THE ACTUAL TOOL YOU WILL RECEIVE. INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING COST— IGNORE THE COST GIVEN BY EBAY.
|
|
URYU SEISAKU LTD/ AIMCO UOW-T60-22- 5.1- 17.4 Ft Lb OPEN END TUBENUT WRENCH. ASSEMBLY PRODUCTION TOOL- USED w/WARRANTY. Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size URYU SEISAKU LTD/ AIMCO UOW-T60-22- 5.1- 17.4 Ft Lb OPEN END TUBENUT WRENCH. ASSEMBLY PRODUCTION TOOL- USED w/WARRANTY. This listing is for an assembly tool. Make: Uryu Seisaku Ltd/ Aimco, Model/ Part# UOW-T60-22(UOWT60-22) UOW-T6022) UOWT6022) Description: Assembly Tool; Production Tool; UOW-T60-22- 5.1- 17.4 Ft Lb Open-End ... moreTubenut Wrench, Includes all/only items pictured. Please note that we(B2E Surplus) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. CONTACT US B2E Surplus LLC 315 S Bracken Ln Chandler. AZ 85224 USA. Phone(Local and International) 480) 240-5603 Fax: 480) 393-4402 Email: We do not publish our email address in our marketplace listings. Please use the"Ask Seller a Question" option. PAYMENTS- EBAY PAYMENTS We accept PayPal
|
|
|
STANLEY- PNEUMATIC NUTRUNNER WRENCH. WITH REVERSE, 3/8" 300 RPM, USED, I COMBINE SHIPPING.
|
|
|
STANLEY- PNEUMATIC NUTRUNNER- A30LA-11F3. 3/8" 850 RPM, USED, I COMBINE SHIPPING.
|
|
|
Atlas Copco ETV S9-450-20-CTADS Electric Nutrunner Torque Wrench! WOW! This item is used. In good working condition! Pictures above are of actual item for sale. Location W2-M21 If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store! Powered by
|
|
This is a Craftsman Air Wrench in Fair Cosmetic Condition! We were unable to test this unit This was purchased from an Industrial Lab and was listed in Needs Repair Condition but we are not able to independently verify condition. This is in Good to Fair Cosmetic Condition. Features: Comes with Five Sockets Includes: Everything Pictured! Defects: None Detected Why Buy From Us? This item comes with our No Hassle Return Policy! We don't think you should spend hundreds- sometimes thousands of dollars on this"As Is- No Returns" Nonsense! We ship WORLDWIDE! Our goal is 100% customer satisfaction! International Bidders: Please contact us for shipping quote before bidding. As always. Please feel free to e-mail us with any questions. Please note: We have no history on this item. Cosmetically ... moreit looks fine. But we don't have the capabilities to fully test. No accessories other then what is pictured is included with this item. Please note- we do not take paypal or credit cards for international orders We are Med Express- Valley City OH 44280. 330) 220-0111. E11 n
|
|
I am selling a Tone S-60EZA Shear Wrench. This unit has been tested and is ready to go to work. It has a 3/4" socket and carry case. The S-60EZA is one of the most popular model's because of it's light weight. These unit's retail for about $1800. Here is your chance to save some money! Payment: Paypal only. Payment must be made within 3 days after the end of the auction. Please have your paypal set up and ready to go! If you pay through E–Check Contact me immediately ending the auction. Shipping: I only ship to CONFIRMED addresses no PO boxes no exceptions. Shipping price listed is for the 48 contiguous states. If you live outside the Continental US contact me for shipping quotes as they will vary. I ship quickly.once payment is received; the item is shipped within 1 to 2 ... morebusiness days in most cases. I do not ship on weekends unless prior arrangements are made. Local pick-up is fine. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return. I do my very best to describe items to the best of my ability and send them out ASAP. I will always try my best to make your shopping experience a pleasant one. I will leave feedback as soon as feedback is left for me! Again. Ask any questions you may have before bidding on any items! Do not assume anything. If it is not shown in the pictures or written in the description, chances are, it does not come with it! ASSUMING MAKES AN ASS OUT OF U AND ME! I will charge a $25.00 restocking fee for any one who backs out of a purchase. In the case of a refund shipping charges will NOT be refunded. Buyer is responsible for return shipping! Good luck and God Bless! ALL ITEMS SOLD AS IS! SALES TAX'S ARE REQUIRED TO BE COLLECTED 8.75% FROM CALIFORNIA RESIDENTS"
|
|
|
1980 Graco air equipment multi purpose wrench
|
|
|
Craftsman 1/2 Air Impact Wrench Pneumatic Heavy Duty Tool RUNNING LARGE TOOL LOT AQIRED FROM LOCAL BUISNESS CLOSING. HAVE TESTED THESE WITH AIR COMPRESSOR TO MAKE SURE THEY RUN, HAVE NOT AND UNABLE TO FIELD TEST FOR STRENTH OR DURIBILITY. PLEASE SEE ALL OUR AUCTIONS RUNNING THIS WEEK FOR MORE GREAT. DEALS. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1414e73c487-0xfa-
|
|
Part Number: OKT-7034. Box Dimensions: L 11.00in. W 3.00in. H 13.00in. Estimated Weight: 5.90. Item Number: 42595. Location: R2A3. Manufacturer: OKT-AIRE Item Details: This is an OKT-AIRE 1/2 inch drive air impact The model is OKT-7034. The impact has been tested and is in good working condition. The impact shows heavy wear and lots of scratches. If you would like this item insured please contact us before you submit payment. Otherwise it will ship without insurance. The shipping department closes at noon each day. Therefore. Any payments received after 10:00 a.m. will ship the next business day. Please use the eBay shipping calculator to determine the shipping cost to your zip code. This will also calculate shipping to other countries. There is a small handling cost added to the actual shipping ... morecost to cover some of our expenses(see About Me page for details) If you are uncertain or have questions regarding the cost please email us before making your purchase. If combining multiple orders. Please contact us to verify the shipping cost as the calculator does not take into account the bigger box sizes, etc. Sometimes this will increase or decrease the cost depending on the items purchased. We don't want to overcharge you nor do we want to lose money on the shipping cost. Used Items: All used working items have a 14 Day(FOURTEEN) DOA warranty from the time of receipt. AS IS Items: AS IS items have NO warranty and are sold for PARTS or SALVAGE ONLY! DOA Items: We will exchange any item found to be defective. Or, at the customers request, parts may be sent to replace a part found to be defective and causing the item to malfunction. PLEASE NOTE: To be covered by Paypal we have to ship to the address listed in the Paypal payment. So. Before submitting your payment please make sure that the address listed is where you want the item shipped. Please do NOT email after you've made your payment and ask us to send it to another address. Payment must be received within 4 days after notification of total payment due. T
|
|
2 HEAVY DUTY STANLEY Nutrunner Torque Wrench Electric Tool E24MFF3-92X03 3/4" 2 HEAVY DUTY INDUSTRIAL 3/4" ELECTRIC STANLEY NUTRUNNER TORQUE WRENCH LOT! MADE IN OHIO USA! USED IN INDUSTRIAL AUTOMATION APPLICATIONS! USED AS IS CONDITION! COMES WITH THE FOLLOWING: MODEL NO. E24MFF3-92X/03 678NM. 92.86 RATIO 17 PIN CONNECTOR WITH 1-1/4" DIAMETER THREADS! TOOL IS AROUND 2-1/8" IN DIAMETER! IT IS AROUND 30 INCHES IN LENGTH! GREAT BULLET PROOF TOOLS! SOME PARTS ARE INTERCHANGEABLE WITH PNEUMATIC TOOLS! THE FRONT END MAINLY! WE HAVE MORE STANLEY TOOLS AND PARTS IN STOCK! EMAIL US WITH YOUR REQUEST AND WE WILL DO OUR BEST TO FIND YOU THE BEST DEALS ONLINE! NO ONE CAN BEAT US ON OUR PRICES! THESE TOOLS ARE AS IS! MAY OR MAY NOT WORK! HONESTY IS ALWAYS OUR POLICY! THEY ARE USED AND ... moreHAVE BEEN SITTING FOR A FEW YEARS. JUST WANT YOU TO BE WELL AWARE OF WHAT YOU ARE BUYING. NO SURPRISES! WE HAVE SOLD ALOT OF THESE AND HAVE HAD NO COMPLAINTS. GREAT STANLEY NUTRUNNER LOT! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS!
|
|
|
This is a used gun but it has been calibrated yearly. It is in great shape. At a great price. 425. o.b.o. Happy Holidays and thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1430e119bab-0xfc-
|
|
|
There is very little use on this gun. It is used but in great shape! 225.obo.
|
|
|
Torkrite Wheel Nut Setter Pneumatic Impact Wrench. Has torque setting for most vehicle in control unit.Rare find.
|
|
Georges Renault CVI Motor Torque Nutrunner 6153941310 Nut Runner THIS NUT RUNNER IS USED. IT HAS BEEN TAKEN OUT OF A MACHINE AND HAS SOME COSMETIC WEAR. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-906-1385. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 6153941310 APPROX. PRODUCT DIMENSIONS: WIDTH: 4.5" LENGTH: 21.5" HEIGHT: 3" SHIPPING WEIGHT: 23 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF ... moreTHE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IM
|
|
Lowell#44 Wrench Ratchet 38" Hexagon Arm Heavy Duty. Click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge Model#44 Lowell. Super heavy duty ratchet wrench measuring 38 inches. See chart below for specifics. Opening is 3 1/2" where the interior drive is mounted. Wrench edges on back side are coupled just along very edge, see photo) but does not affect the function, just cosmetic. Overall this beast is in great condition! Offered with reduced shipping. I'll share the cost with you, as this weights about 30 pounds. I strive to offer excellent service for my buyers. I do my very best to properly describe each item to avoid confusion. I ... moreunderstand what it takes to make sure you are happy and feel treated fairly. I ship the first business day after payments are received. In the event something is missed from my description. I offer returns on items that may not have been properly described. I ask that if there is an issue with a purchase, that you first give me the chance to remedy the situation prior to leaving feedback. I will quickly work with you to resolve any issues you may have with your purchase. Thank you for viewing one of my auctions. for more great items! I prefer payments be made through paypal. But will accept other forms of payments if an item is being delivered or picked up in person. Payment is expected within 5 days of the auction's ending. I only accept payments from verifiable paypal accounts, with a verifiable address. I generally will ship all items within one business day after a payment is received. If there is ever to be a delay in shipping time. I will list this in my ebay listings prior to the item being purchased. As a buyer you understand that sometimes things happen with the shipper that are out of both of our control. In the event this happens. You agree to work with me to resolve the shipping issue. If insurance was purchased
|
|
|
Uryu URW-12NB Pneumatic Ratchet Wrench- Slight wear Max Torque 68.69 ft lb, Max Torque 93.1 Nm, Weight 7 lb, Manufacturer AIMCO URYU,
|
|
|
Unique accessibility in cramped spaces, To loosen. Turn the tool upside down, Torque soft joint at 6.3 bar 22 ft lb, Torque soft joint at 3 bar 11 ft lb, Free speed 135 r/min, Weight 3.1 lb, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14378ea0173-0xfa-
|
|
CONDITION used piece of the trigger is broken(plastic piece) still functions though has scratches and scuff marks Item Functionality functional read above impact Shipping Info We will attempt to ship your item within 48 hours after payment has been received.Orders are shipped Monday through Friday. We are unable to ship to PO boxes. APO,FPO OR HC addresses. Tracking info is sent to your Paypal e-mail address. In most cases, signature is required upon delivery. Payment Info Paypal is our preferred method of payment. However. We can ship to your Paypal confirmed address only! If you send a Paypal payment with an unconfirmed address it will not be accepted. This is different than being verified since the only requirement is having a bank account linked to your Paypal account. 0 feedback users ... moremust provide working phone number. Communication We are only open 9-5 EST business days. We do our best to answer questions in a timely manner. PLEASE use eBay messages for communication. Do not send emails. Email account is not monitored and your emails won't be answered. Customer service is our main priority. Please if you have any concerns about your product or any questions at all contact us via message. Return Policy 14 DAY MONEY BACK GUARANTEE FOR DEFECTS NOT DESCRIBED IN ITEM LISTING, THIS ITEM MAY BE AVAILABLE FOR THE GLOBAL SHIPPING PROGRAM. CLICK ON SHIPPING DETAILS TO SEE!
|
|
|
REVERSIBLE. 1/4" NPT 4PCS SOME OF THEM FIXED AS YOU SEE ON PICTURES(BF1-1-4)
|
|
|
STANLEY Pneumatic Electric Torque 1/2" Right Angle Nutrunner Tool A40LA2TAX 64 STANLEY PISTOL GRIP NUTRUNNER ELECTRIC TORQUE CONTROLLED TOOL! GOOD USED WORKING CONDITION! COMES AS SHOWN IN THE PICTURES. COMES WITH THE FOLLOWING: RELIABLE DURABLE HEAVY DUTY NUTRUNNER THAT GETS THE JOB DONE! MODEL NO. A40LA2TAX 64 S/N: XS124 MEASURES 21" IN LENGTH! 350 RPM 1/2" DRIVER! HAS A HANGER ON IT. F4150 ON THE FRONT GEAR HOUSING. 2MV/V 0-53.85# WE HAVE MORE OF THESE AND OTHER MODELS IN STOCK! EMAIL US WITH YOUR REQUEST OR SEARCH OUR STORE! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS!
|
|
|
Pneumatic Torque Wrench TorcUp Raptor RP2000/ FRL/ 2 REACTION ARMS Lightly used in excellent almost new condition! Includes: Filter/Regulator/Lubricator Assembly. 10' hose 125 PSI Max. 2 1/2" PSI Gauge. Filter Auto Drain. 1 12" Nose Extension. 1" Square Drive. 2 Reaction Arms. 1- Square Drive Direct Socket Engagement. 1" Square Drive. 2- Pistol Grip Firm Pistol Grip Control. 3- Air Drive Constant Speed Rotation. 4- Reaction Member Sturdy"Non-Welded" Construction. 5- Internal Gear Drive Patented Planetary Design. 6- Operation Trigger Feather Touch Forward/Reverse. Includes: Filter/Regulator/Lubricator Assembly. 10' hose 125 PSI Max. 2 1/2" PSI Gauge. Filter Auto Drain. 1 12" Nose Extension. 1" Square Drive. 2 Reaction Arms.
|
|
Hello and thank you f or viewing our listing for. Impactool/Impact Wrench This listing is for a previously owned Ingersoll Rand 231 1/2 Inch Impactool/Impact Wrench Model A. This impact wrench has been tested. It was not tested with a load, and it is running. The wrench is 7 1/4 inches long and 8 1/2 inches tall. If you have any questions. Feel free to message me through eBay. Happy bidding! Thank you again for looking at this listing! With all our auctions we strive for a 5 star experience and would be more than happy to help our customers with any problems they incur with any of our transactions. Please contact us with any problems prior to leaving feedback and we will try to solve any situation you do come across. If you have any questions about the item feel free to ask. Also feel free ... moreto look at the store for more merchandise. We also offer local pickup on all items that are listed here on eBay(see details for full info) We do not allow for local eBay customers to enter the establishment where items are held to test the items. We test all items prior to listing to assure that they operate properly and note any errors on the item. Thank you. Bid With Confidence! See Our Feedback! Check out Our Store For More Great Items! Terms We are an honest seller and do our best to provide the most accurate information in all auctions. If you feel there is an error or need clarification please feel free to contact us. E-mails should be sent through eBay only. We can not answer any e-mails outside of eBay as this violates eBay policy. Before you leave a neutral or negative feedback. Please contact us let us know what can we can do to assist you further. Shipping We will combine shipping costs on multiple purchases. Please wait for us to send you a revised invoice prior to payment. We only ship within the Continental USA. We do not ship internationally. We ship most items using FedEx Ground. Payment& Taxes We accept payment by PayPal. If you cannot pay with Paypal. Please contact us for further assistance. MA residen
|
|
|
ALL SERIOUS OFFERS CONSIDERED We are a pawn shop. We took this item in on pawn, but the owner never returned so we are selling this item to recover our loan. We ship within two business days to lower 48 States only sells new for over $1600 Non-shutoff pulse tool operation for lightest weight. More power in a smaller package, Pulse unit eliminates all torque reaction. Technical Specifications: Manufacturer AIMCO URYU MPN UL-40D Drive Type 1/4" Hex Free Speed 6100 RPM, Length 5.5 In, Length 140 mm, Max Air Consumption 7.0 Min Torque 8.1 ft lb, Max Torque 14.8 ft lb, Min Torque 11 Nm, Max Torque 20 Nm, Sound Level 75 here is a link for you to review this item;
|
|
|
Universal Tools 3/8" Drive Ratchet Wrench Model# UT-8005 This ratchet wrench is in excellent shape and in perfect working order! Posted with
|
|
URYU NO. UAN 6114 40C 7.2- 12.9 FT LB ANGLE NUT RUNNER WRENCH High power to weight ratio for higher productivity Wide variety of speeds and torque ranges to match your application Easily adjusts to forward or reverse rotation with smooth rolling selector Torque adjusts from outside of tool with a Phillips screwdriver Delivers minimal torque reaction with instant shut-off Light weight Low noise levels with exhaust located at rear of tool Fewer parts and higher reliability than previous models Easily lubricate the angle head bevel gears without disassembling the tool with grease-cock feature ISO 5393 testing reveals a 6-sigma combined capability of less than 20% on all models Mechanical clutch offers precise torque control regardless of joint rate*Provides greater precision. Especially on hard ... morejoints, with low inertia design High power allows for torque repeatability on soft joints and prevailing torque applications A Poka-Yoke option is available for bolt counting or error-proofing(Use in conjunction with UTM-1100 fastener counter) Recommended Air Pressure: 85 psi,
|
|
You are bidding on a CHICAGO PNEUMATIC CP-830H AIR RATCHET WRENCH 1/2" DRIVE AS IS-FREE SHIPPING! The items are used and does how signs of normal wear, The items are being sold AS IS for parts or repair NO RETURNS, The items have not been tested. Please refer to the pictures for the actual condition. Nothing Included Thanks for looking and Happy Bidding! PLEASE READ ALL DISCLOSURES BEFORE YOU BID! GOOD LUCK! High bidder must pay within 3 days by credit cards via(VERIFIED) Pay Pal. WE DO NOT SHIP INTERNATIONALLY! WE SHIP TO THE LOWER 48 STATES US ONLY. THE ITEM WILL ONLY BE SHIPPED TO THE ADDRESS ON THE PAYPAL PAYMENT NO EXCEPTIONS WILL BE MADE! PLEASE NOTE ALL VIRGINIA RESIDENTS ARE SUBJECT TO VIRGINIA SALES TAX SATISFACTION GUARANTEED RETURN POLICY: DOES NOT APPLY TO AS IS ITEMS! Item ... moremay be returned for any reason. Purchase amount. Excluding any and all shipping charges, will be refunded. NOTE: Only winning bid amount will be refunded. We like to satisfy all of our customers. Any concerns need to be addressed within 3 days of receipt of item. We attempt to resolve all matters to buyers satisfaction. Due to an abundance of emails we will try to answer emails with a 48 hour period. Please notify us of any concerns prior to leaving feedback. If you have questions regarding your purchase. Please contact Dawn at 757-595-9191. Our office hours are Monday- Friday 10:00 AM to 5:30 PM. We want every transaction to be a positive experience. Thank you and happy bidding! DRK/ B15
|
|
|
Sioux model 5011 ratchet wrench. Has a few scratches but good working order not used much Posted with
|
|
|
Uryu ULT70 pistol grip pulse tool 3/8 square drive. 6000rpm free speed. Min torque 30nm. Max torque 55nm. Auto shut off weight 2.3lbs. Tool has been tested before posting to sale. Posted with
|
|
|
The impact is used and shows some normal wear but still in good condition.
|
|
ARO POWERTOOL INC/ INGERSOLL RAND MODEL 201 7855-ES AIR PNEUMATIC WRENCH TOOL Make: ARO Powertool Inc/ Ingersoll Rand, Model/ Part# 1: 201, Model/ Part# 2: 7855-ES(7855ES) Description: Air Tool, Includes all/only items pictured. Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the ... morewinning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have[5] days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! Payment We accept the following forms of payment. PayPal. Sales Tax For shipments to Arizona addresses. We are required by State law to collect 7.8% Sales Tax. Shipping All items under 100 lbs will be shipped either USPS or Fedex. Any items over 100 lbs will be shipped freight through a freight carrier of our choice. Customer Service If you have any questions before or after your purchase please use the ask a question button.
|
|
You Are Bidding On A Pre-Owned Matco Tools 3/8" Drive Changeable Head Air Ratchet Auction is for ratchet only. No sockets or other accessories. Ratchet is in good working condition. F 005183844 Buyer Pays $13.86 For Shipping& Handling. No Shipping to APO/FPO.Shipping Within The 48 Continental States Only! Item's usually ship within 1 business day of payment clearing Paypal payments accepted by those with a U.S.A. Paypal account only. Also the Paypal account needs to be backed by a U.S.A. bank account or credit card. E-Checks through PayPal must clear before shipment. Payment must be received within 48 Hours after auction ends. Texas Residents Pay 8.25% taxes on all items You may be interested in our other listings on eBay. Click Here To View Our Jewelry Auctions. Our business ... morehours are Monday thru Friday 8: 30 am- 6:00 pm CST. Shipping and questions will be taken care of during regular business hours. As a courtesy. We offer a 14 day inspection period on any item when payment for item was received no later than 5 days from the date of auction close. This is a return privilege, extended to customers who send payment on time. Late payments do not qualify for return privileges. Any refund will be for the price paid, minus shipping& handling, when item is received in"as-sent" condition. No refund will be issued for items that have been used, altered or damaged. Clothing& SOLD-AS-IS" items DO NOT qualify for the inspection period and or return policy. Powered by
|
|
Ace Pawn Shop Auctions USED THE ARO CORP NA051B-8 1/2" DRIVE 800 RPM PNEUMATIC NUT RUNNER SEE CONDITION BELOW PICTURES PICTURES ARE OF ACTUAL AUCTION ITEMS CONDITION You are bidding on a ARO CORP NUT RUNNER. This nut runner is in great shape with minimal wear to note. It has slight oxidation near drive end. It runs and reverses without issue. It has been thoroughly tested. It has a few light scratches. It has tons of life left in it. See pictures for a clear idea of condition. Check out our other auctions for to choose from. We happily do combined shipping on multiple items.just remind us at the end of auction. See pictures for a clear idea of condition. ENJOY! Thanks For Looking and Good Luck! Check out my and bid with confidence. I work hard to ensure the happiness of all my customers. ... moreIf you have any questions or concerns feel free to email me thru ebay messaging. Our business hours are 9:00 to 5:00 est Mon-Sat. If you email me after 5 I won't get it until the next work day. I try to check my email a few times a day to reply promptly to all the questions. Thanks for looking at my auction! CHECK OUT OUR OTHER ACE AUCTIONS THERE IS NO RESERVE ON THIS AUCTION! Bidders: If you are under the age of 18. Or still living with your parents and using their money. Please make sure you can own and pay for this item. Any winning bidders who email me saying their child won the auction without their knowledge. Etc. will receive negative feedback and reported to Ebay. No communication within 14 days will also result in negative feedback. Shipping& handling on this item will be FedEx for the LOWER 48(VI. HI, AK WILL BE MORE SO LET ME KNOW BEFORE THE AUCTION ENDS) Indiana residents add 7% sales tax to final bid amount. Street Address Required for FedEx Delivery(NO PO BOXES) When receiving a FedEx package. Please document any damage and save all materials in case of shipping damage claim. U.S. Bidders Only US PAYPAL ACCOUNT WITH US B
|
|
CLECO 55RNL-3T-4 ANGLE NUTRUNNER FREE SHIPPING THIS WAS A SALES DEMO. I CAN'T SELL AS NEW BUT THIS TOOL HAS MINIMAL USE AND OUTSIDE WEAR. PLEASE VIEW PICTURES. INCLUDES 1 YEAR IDG WARRANTY- WARRANTIES PERFORMED BY"US. Check out my other items! PLEASE EMAIL US IF YOU HAVE ANY QUESTIONS $2000.00+ NEW The right angle nutrunner is a stall nutrunner that is lever start and has a twist ring reverse. The right angle nutrunner has a 1/2" air inlet and a square drive. With a Cleco right angle stall nutrunner. The tool runs down the fastener until the torque resistance in the fastener causes the tool to stall. At this point the operator releases the throttle(lever) and the operator removes the tool from the work site. On applications with varying torque rates, the stall type tool can produce ... moreaccurate results. Stall type tools are recommended for lightweight applications or where accessibility to the fastener prevents the use of other types of tools.
|
|
|
VERY GOOD USED CONDITION- COUPLE VERY LIGHT SCUFFS- COMES WITH A $25 SWIVEL AIR HOSE WHIP- FREE PRIORITY USPS SHIPPING!
|
|
You Are Bidding On A Pre-Owned Proto 3/8" Drive Torque Wrench 40-200 IN LBS- 6064C. Case not included. Wrench is in'Like New' condition. F 005705601 Buyer Pays $0.00 For Shipping& Handling. No Shipping to APO/FPO.Shipping Within The 48 Continental States Only! Item's usually ship within 1 business day of payment clearing Paypal payments accepted by those with a U.S.A. Paypal account only. Also the Paypal account needs to be backed by a U.S.A. bank account or credit card. E-Checks through PayPal must clear before shipment. Payment must be received within 48 Hours after auction ends. Texas Residents Pay 8.25% taxes on all items You may be interested in our other listings on eBay. Click Here To View Our Jewelry Auctions. Our business hours are Monday thru Friday 8: 30 am- ... more6:00 pm CST. Shipping and questions will be taken care of during regular business hours. As a courtesy. We offer a 14 day inspection period on any item when payment for item was received no later than 5 days from the date of auction close. This is a return privilege, extended to customers who send payment on time. Late payments do not qualify for return privileges. Any refund will be for the price paid, minus shipping& handling, when item is received in"as-sent" condition. No refund will be issued for items that have been used, altered or damaged. Clothing& SOLD-AS-IS" items DO NOT qualify for the inspection period and or return policy. Powered by
|
|
Quality Pneumatic ATLAS COPCO LTV36 S005-10 Torque Right Angle 3/8" Nutrunner QUALITY INDUSTRIAL HEAVY DUTY ATLAS COPCO NUTRUNNER WRENCH! GREAT USED WORKING CONDITION! SPECS: MODEL NO. LTV36 S005-10 S/N: NA547004 MEASURES 16" IN LENGTH! HAS 3/8" RIGHT ANGLE HEAD! IT IS NON REVERSIBLE. HAS TORQUE ADJUSTMENT ON THE SIDE OF THE TOOL. EASY TO ADJUST WITH A PHILLIPS SCREWDRIVER! WE HAVE MANY MORE OF THESE IN STOCK IF NEEDED. WE CARRY PARTS TO REPAIR THESE TOOLS ALSO! THEY ARE BUILT TO LAST AND WILL RUN FOREVER! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS ... moreSHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1445add5978-0x112-
|
|
|
Snap on slugging wrenches pipe handle 11/8 11/4 X360B X400C your buying all four pieces possibly may have engraving and or dents dirt etc. from a working manufacturing facility. Two of the wrenches have been grinded on top making them a little thinner on the top side but they both still work fine buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching
|
|
|
vintage no 8 pat applied NEB for welding clamp visegrips look at pics for condition early antique tool buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1445eef8744-0x107-
|
|
|
group lot of vintage pliers crescent knippers needle nose visegrips good old tools buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching
|
|
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2359989.4 A: 0013000000CXCfg O: 0065000000QI6Vn PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Lot of Various Pneumatic Wrenches. Grinders, Ratchets& Other Various Hand Tools- Untested This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small ... moreequipment. Overview: Make: Various Model: Various Models Type: Pneumatic Wrenches. Grinders, Ratchets& Other Tools Serial No: Various Items Observed: Manufacturers: Georges Renault Ingersoll-Rand Chicago Pneumatic Dimensions& Weight: Shipping Weight: 224 lbs Condition: Unknown/Untested- unable to verify working condition Units may be incomplete or missing parts- see photos for details Overall normal wear from age& previous use in working industrial environment When bidding. Please understand that we are unable to determine the working condition of these items Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual h
|
|
|
group lot tools S+K snapon Plvmb plumb craftsman sockets ratchet wrenches calipers feeler gauges antique tools etc. your buying all shown one of the craftsman wrenches is broken as seen in picture. Nothing has been cleaned up at all some others could be in need of something too buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching
|
|
|
United Air Tool Nut Runners. Assorted lot of 5 similar nut runners. Model D2 250SR.1463
|
|
|
group lot tool King Dick SLM6192 6224 wrenches DIM 894 metric vintage industrial your buying all shown two are king dick also a set of DIN894 metric wrenches plus all the others buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching
|
|
|
group lot tools industrial wrenches vintage and antique Williams std and metric your buying all the tools shown buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14462260eb1-0x103-
|
|
|
Wizard ALL- PLUG NO120 drum wrench vintage milwaukee usa industrial old tool metal construction I think its cast iron buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14462260ee1-0x101-
|
|
|
AmPro 4x4 hub socket.used to remove the nuts on 4x4 hubs.in great shape
|
|
|
lisle 42920 universal fan clutch wrench set
|
|
|
Snap-On 1/4 air ratchet model FAR25A. Email any question before end of auction. Thanks
|
|
|
VERY GOOD USED CONDITION- IT HAS A COUPLE OF LIGHT SCUFFS FROM BEING USED- IT COMES WITH A"SNAP ON" SWIVEL AIR HOSE WHIP- This Ratchet Sells off the MAC TOOL Truck for $144 + TAX and the Air Hose Whip cost $30 off the SNAP ON Truck.
|
|
|
Snap-On 1/4 in. mini air ratchet. This item is used and is in good working condition. The item has greaseable ratcheting head and adjustable air flow. Requires air tool oil. Item being sold as is. Part# FAR-2500.
|
|
|
SNAPON 1/2" DRIVE PNEUMATIC IMPACT DRIVER. Selling for $250 or make offer
|
|
Pneumatic ATLAS COPCO LTV36 LTV26 Torque Clutch Right Angle 3/8" Nutrunner Lot QUALITY INDUSTRIAL HEAVY DUTY PNEUMATIC AIR OPERATED ATLAS COPCO NUTRUNNER WRENCH LOT! GREAT USED WORKING CONDITION! COMES AS SHOWN IN THE PICTURES! SPECS: MODEL NO. LTV36& LTV26 3/8" RIGHT ANGLE DRIVE! IT IS NON REVERSIBLE. HAS TORQUE ADJUSTABLE CLUTCH. YOU ADJUST IT ON THE SIDE OF THE TOOL. EASY TO ADJUST WITH A PHILLIPS SCREWDRIVER! WE HAVE MANY MORE OF THESE IN STOCK IF NEEDED. WE CARRY PARTS TO REPAIR THESE TOOLS ALSO! THEY ARE BUILT TO LAST AND WILL RUN FOREVER! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER ... moreRATE. EBAY'S CALCULATOR DOES NOT ALWAYS SHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS!
|
|
|
Sales demo tool has less than 1 hour use. Owner's manual
|
|
|
I have a working. In good shape 7/16 air ratchet wrench that was being auctions from a retirees toolbox. It has his name ground off on the side, other then that she fires up. It has been tested prior to listing to verify it works flawlessly. It's been greased, and oiled. It runs very very nice! This model H25NR21C13 with a part# a2d6435-ea Buy from a trusted seller. With 100% positive feedback. I have personally tested this, and it runs like new. No international bidders. No bidders with zero feedback. sold as is(in working order) No returns. Posted with
|
|
|
Used heavy duty 600 foot/pound(standard) or 827.1 N.m(metric) 3/4" ratcheting head. Torque wrench. Approximately 44 1/2" long in good condition.
|
|
|
1980 Graco air equipment 6-way multi purpose wrench appears capable of accommodating six different nut and fitting sizes. Ranging f rom 5/16" up to 1" See all Photos for questions email if questions.
|
|
|
BT# 15462 M04G8-100.1Y You are looking for: URYU SEISAKU UNR-50 NUTRUNNER ASSEMBLY TOOL USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: URYU SEISAKU LTD. Additional info: NUTRUNNER Model: UNR-50 Assembly Tool Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
LIGHTLY USED- LIKE NEW- NO ENGRAVINGS OR MARKINGS Product Description This Sunex mini air ratchet wrench features a maximum speed control throughout the range. Its small design to get into tight areas. Rear exhaust to keep air away from work surface. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144aa780296-0x104-
|
|
|
This is a* BUY IT NOW* auction for a used TorcUp Raptor RP-2000. Excellent condition cosmetically and functionally. Checked and tested. Everything works the way it should. This auction includes as pictured. Free shipping to a Confirmed address in the Continental U.S. Thanks for looking and happy bidding!
|
|
Excellent used condition Atlas Copco 1/4" drive nut runner. Model# LTV009 R07-6-L. Reversible. 500 RPM. Torque range 1.5-4Nm. Weights about 1 lb 10 oz. Currently calibrated at 35 in/lbs. in CW direction only. The torque limit setting only applied to clock-wise only. Counter clock-wise has higher torque limit so it can back out it's own fasteners. What you see are the actual pictures. Shipping is just $10.00 within USA. Canada $19.00. I will combine shipping if you buy more than one item from me. please check out my other ebay items. On Mar-04-06 at 12:37:54 PST. Seller added the following information: On Jul-02-08 at 17:56:32 PDT. Seller added the following information: Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144bc23f424-0x115-
|
|
ATLAS COPCO CP Nutrunner Wrench Right Angle Head"5/8 LANCE SOCKET Drive LOT PNEUMATIC ELECTRIC ATLAS COPCO. CP NUTRUNNER WRENCH 2 PIECE HEAD ASSEMBLY LOT! SPECIAL LANCE SOCKET 5/8" HEADS! EXCELLENT CONDITION! COMES WITH THE FOLLOWING: MODEL NO. T608502 MARKED ON THE LANCE SOCKETS! THE SOCKET IS MAGNETIC! ALLOWS YOU TO EASILY INSTALL THE SOCKET TO THE NUT! HOLDS THE NUT TIGHT AND MAKES YOUR JOB ALOT EASIER! THEY MEASURES AROUND 4-3/4" TALL! THE MOUNTING THREADS MEASURE 1-5/6" IN OUTER DIAMETER! THERE IS A 11 TOOTH SPLINED SPINDLE THAT DRIVES THE SOCKET! HEAVY DUTY CASTING STEEL MATERIAL THEY ARE MADE OUT OF IS STRONGER THEN YOU NORMAL RIGHT ANGLE HEADS! FITS CP. ATLAS COPCO AND MAY FIT OTHER MODEL PNEUMATIC& ELECTRIC WRENCHES! WE HAVE MANY DIFFERENT RIGHT ANGLE HEAD ... moreASSEMBLIES! EMAIL US TODAY IF YOU NEED SOMETHING YOU DONT SEE ONLINE! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS SHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS!
|
|
|
FOR SALE IS A USED STANLEY PNEUMATIC POWERED RATCHET. THIS IS A HEAVY DUTY INDUSTRIAL UNIT WITH A LONG HANDLE. THE LONGER HANDLE PROVIDES GOOD LEVERAGE OVER THE SHORTER UNITS. THE UNIT HAS A TORQUE SETTING ON IT AS WELL. SEE PHOTO) IT IS 3/8 DRIVE WITH LOCKING/RETENTION PIN. THE UNIT HAS BEEN TESTED AND WORKS IN BOTH FORWARD AND REVERSE. IT IS USED SO IT HAS MARKINGS ON VARIOUS NICKS AND SCRATES ON IT. PLEASE SEE PHOTOS. BASIC SPECIFICATIONS. MODEL: A33LRA2ACT-6P1. WEIGHT: 4.8 lbs. LENGTH: 20 INCHES(INCLUDING AIR FITTING) DRIVE SIZE: 3/8 INCH. RPM: 500.
|
|
|