|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Sterling, United States
These blocks are used to hold small parts for surface grinding operations as well as to save your magnet chuck from needing to be dressed. These blocks can be dressed for each run and last for hundreds of jobs by simply grinding them parallel before use.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids Free Shipping
Condition: New Location: Chicago, United States
Forged clamp has adjustable side screw to support the block and prevent tilting. Accuracy: All surfaces (except V’s) parallel and square within 0.0002". Long V-groove is central, parallel and square with all surfaces within 0.0003".
0 bids Free Shipping
Condition: Used Location: Norwich, United States
Magnetic Parallels For Precision Grinding Plus V-block. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping
Condition: Used Location: Waterford, United States
USED, MAGNETIC TRANSFER BLOCKS AND PLATES. THEY ARE USED WITH MAGNETIC CHUCKS. LOOK AT THE PICTURES.
0 bids $18.00 Shipping
Condition: Used Location: Sheffield, United States
FLAT ANGLE GAGE BLOCKS. WE REGULARLY USE THESE UP AGAINST AN ANGLE PLATE TO SLIDE DRESS ANGLES ON GRINDING WHEELS, SAVES WEAR AND TEAR ON YOUR HERMANN SCHMIDT RADIUS DRESSERS OR J&S RADIUS DRESSERS OR WHATEVER TYPE YOU DO USE.
0 bids $15.00 Shipping
Condition: Used Location: Sheffield, United States
ALL OWNED AND MADE BY A USA TOOLMAKER. MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ALIKE. 2, PARALLELS FRESH GROUND AS SHOWN. 5/16"X 1.008" X 2.44" LONG.
0 bids $22.50 Shipping
Condition: Used Location: Sheffield, United States
CUSTOM TOOLMAKER MADE RAILS ON 2 SIDES AND END AS SHOWN PLUS THE ORIGINAL RAIL! CUSTOM TOOLMAKER MADE BRASS?. SINE PLATE " TAFT-PEIRCE " 9118 USA MADE TOOLS AS SHOWN. 2-1/8" X 6-5/16" (2.130" WIDE X 6.800") TOP PLATE WITH TAPPED HOLES (20) #10 X 32 AND (2) 1/4" X 20 ON ENDS, ALL IN GREAT SHAPE AS SHOWN.
0 bids $25.00 Shipping
Condition: Used Location: Sheffield, United States
3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN.
Buy It Now
Free Shipping
Condition: Used Location: Louisville, United States
Grinding Machinist Magnetic Transfer Block - GREAT CONDITION 2 1/2" X 2" X 2". The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
0 bids Free Shipping
Condition: Used Location: Troy, United States
Perfect for Spin Index, Whirley, Motorized and the like grinding. Used, well maintained, "Master Jig Grinding" stamped on back of V-Block. From a master machinist tooling crib known for very tight tolerances.
0 bids $35.50 Shipping
Condition: Used Location: Sheffield, United States
ELTEE Inc. HANDIEST V BLOCK SET AVAILABLE. STARRETT 6" SCALE IS NOT INCLUDED. SEE PICS. OFFSET STYLE AS SHOWN. USED BY TOOLMAKERS AND MACHINISTS ALIKE FOR PRECISE MACHINING OR GRINDING OR INSPECTION.
0 bids $7.90 Shipping
Condition: New Location: Sunder Vihar SO, India
✅Angle Clamp Design : Features parallel sides with a centrally ground V-groove, and includes a central hole for easy pin removal or drilling. ✅Durable Construction : Built from hardened, precision-ground tool steel for long-lasting performance in demanding machining applications.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids $15.00 Shipping
Condition: Used Location: Sheffield, United States
5/8" WIDE X 5" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N BROWN&SHARPE. TOOLMAKER MADE. PLANER GAGE AS SHOWN. SLIDE IS SILKY SMOOTH, AND APPEARS TO BE MADE SIMILAR TO OUR PRATT & WHITNEY UNIVERSAL PLANER GAGES ALSO SOLD HERE.
0 bids $22.50 Shipping
Condition: Used Location: Sheffield, United States
TOOLMAKER MADE 1"-2'-4" BLOCKS WITH STAMPED INITIALS ON END AS SHOWN. (1 MATCHED SET OF 2 GROUND ON ALL SIDES TOGETHER)OWNED BY TOOLMAKER MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ALIKE.
0 bids $35.50 Shipping
Condition: Used Location: Sheffield, United States
HOLE DOWN THRU THE VEE IS 1/2" THRU. SLOT ON BOTTOM IS. 47" WIDE AND HAS TAPPED #10 HOLES ALSO TO BE KEYED TO A MACHINE. VEE WIDTH IS 1.975" WIDE AT TOP. USED BY TOOLMAKERS AND MACHINISTS ALIKE FOR PRECISE MACHINING OR GRINDING OR INSPECTION.
0 bids $7.50 Shipping
Condition: Used Location: San Mateo, United States
123 Block 3"X 2"X 1" Precision Machinist Hardened Fixture Plate. MACHINIST HARDENED FIXTURE PLATE. PRECISION GRINDING MILLING.
Buy It Now
Free Shipping
Condition: New Location: Evansville, United States
Suburban Tool USA Angle Block Set 1° - 30° Machinist Surface Grinding 1/4 & 1/2. Condition is New. Shipped with USPS Priority Mail.
0 bids $25.00 Shipping
Condition: Used Location: Sheffield, United States
3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN.
0 bids $18.50 Shipping
Condition: Used Location: Sheffield, United States
A backing plate, against which the back edge of one clamp should be placed, is available on most magnetic chucks. Each Magna-Vise clamp is composed of two steel sections connected by a preset spring steel strip.
0 bids $15.00 Shipping
Condition: Used Location: Sheffield, United States
TRIANGLES (2), FRESH GROUND. 30 x60 x90 AS SHOWN. 5/16" X 3.0" X 6.0"30 x60 x90 . BOTH IN EXCELLENT FRESH GROUND CONDITION AS SHOWN. I HAVE MANY OF HIS TOOLS TO LIST!
Buy It Now
Free Shipping
Condition: Used Location: Yorktown, United States
Suburban Tool USA 10pc angle block set in case. Sold by Ralmikes so has their tag over top of the factory case marking. The 15* block is thicker and marked Ralmikes while the others are marked Made in USA and the degree of the block. Actual items pictured.Be sure to view our other items for more great tooling finds.
0 bids $28.00 Shipping
Condition: Used Location: Sheffield, United States
BLOCK WAS GROUND USING A HERMANN SCHMIDT SQUARING BLOCK AND A HERMANN SCHMIDT MAGNA-SINE ON A BALLWAY SURFACE GRINDER BY PA TOOLMAKER. THIS IS AN EXCELLENT USED TOOL! TOOLMAKERS EDM FLUSH BLOCK OR CHUCK.
0 bids $35.00 Shipping
Condition: Used Location: Sheffield, United States
VERY NICE IN THE BOX STARRETT 1/2" THICK No. 384 PARALLEL SET (10 TOTAL PARALLELS (5 ) FACTORY MATCHED PAIRS) WITH FACTORY CASE AS FOUND. SEE LAST PICTURE. Starrett No. 384 Steel Parallels are hardened and ground to close limits.
0 bids $18.50 Shipping
Condition: Used Location: Sheffield, United States
MAG-NA-HOLDS MHD-5 5" SUBURBAN TOOL Co, USED IN A VISE TO HOLD IRREGULAR PARTS FOR MILLING OR GRINDING AS NEEDED. SOLD BY SUBURBAN TOOL Co. MADE OF HARDENED STEEL AND PRECISION GROUND. THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK!
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. Precision Magnetic V Block. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
0 bids Free Shipping
Condition: New Location: , India
The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck.
Buy It Now
Free Shipping
Condition: Used Location: Hamburg, United States
Precision V-Block Quality Made in the U.S.A. by Challenge Machinery Co. 3½"x3"x6" with 3½" V. 3½"x3"x6 Challenge 11/19 Shelf.
0 bids $22.50 Shipping
Condition: Used Location: Sheffield, United States
SPECIAL ORDER STARRETT 384 PARALLELS. VERY NICE IN THE BOX STARRETT No. 384 PARALLEL SET (8 TOTAL PARALLELS (4 ) FACTORY MATCHED PAIRS) WITH FACTORY RED LEATHER BOX. ALL ARE ORIGINAL STARRETT 384 PARALLELS IN THIS SET.
0 bids $18.50 Shipping
Condition: Used Location: Sheffield, United States
Each Magna-Vise clamp is composed of two steel sections connected by a preset spring steel strip. The angle of this spring is such that these sections will normally be 5° to each other. The wedging action of the teeth against the work piece holds it securely in place against the face of the chuck.
0 bids Free Shipping
Condition: Used Location: Greenville, United States
These were made roughly 20 years ago and dipped in wax. precision ground.50" thick.
0 bids Free Shipping
Condition: Used Location: Greenville, United States
45, 30, 15, degree angles.
0 bids $25.00 Shipping
Condition: Used Location: Sheffield, United States
3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Precision V-block Cast Iron Steel V-shaped Table. Used for the detection, marking and positioning of precision axilan parts, etc. 054103 Steel V-shaped Table 2pcs/box. ▲ 6 months' warranty for the machines, not for the consumables.
0 bids Free Shipping
Condition: New Location: , India
Present Magnetic V block 150x95X75mm HARDENED & GROUNDED- 1piece. The use of coolants will not effect this Vee Block as it is fully sealed. These are used for grinding and drilling work and even for light milling work.
0 bids $18.50 Shipping
Condition: Used Location: Sheffield, United States
SNAP HINGE IS INTACT AND WORKS. VERY HARD TO FIND 7/64" (.102") THIN STYLE AND VERY HANDY TO HAVE FOR GRINDING NON-FERROUS MATERIALS ON YOUR SURFACE GRINDER! STARRETT 6" SCALE IS NOT INCLUDED. THESE ARE NICE AND I'LL SHOW YOU IF YOU LOOK!
0 bids $15.00 Shipping
Condition: Seller refurbished Location: Sheffield, United States
MILL OR GRIND ANGLE GAGE BLOCKS. THIS SET IS A USED SET AND CORRECTLY MADE TO PRINT! TRIANGLES 15 WITH A 40 , 1 0 WITH A 45 , 25 WITH A 30 ,20 WITH A 35 .
0 bids $18.50 Shipping
Condition: Used Location: Sheffield, United States
Each Magna-Vise clamp is composed of two steel sections connected by a preset spring steel strip. The angle of this spring is such that these sections will normally be 5° to each other. The wedging action of the teeth against the work piece holds it securely in place against the face of the chuck.
0 bids Free Shipping
Condition: Used Location: Racine, United States
Toolmaker produced in very good used condition.
0 bids $28.00 Shipping
Condition: Used Location: Sheffield, United States
FLAT ANGLE GAGE BLOCKS (1/4 -10 ) AND MILL ANGLES (15 -45 ) ALL (18) WITH A HANDY FOOT! FLAT ANGLE GAGE'S. MILL ANGLES 15 , 20 ,25 , 30 , 40 , 45 . DEGREES AS SHOWN. 18 TOTAL BLOCKS HERE AS SHOWN.
0 bids Free Shipping
Condition: Used Location: Bangor, United States
What is pictured is the lot you will be receiving. This is being sold as is.
Buy It Now
Free Shipping
Condition: Used Location: Highland, United States
MOORE PARALLEL SET-UP BLOCKS SET 6PCS 1-2-3 + 6PCS 7/8-1-1/4-1-1/2 CASE + MISC HARDWARE SHOWN.***NICE SET OF SHOP USED MOORE BLOCKS, FEW GRIND MARKS + STAINING. AS SHOWN ***THIS IS NOT A $5000.00 SET***
0 bids $22.00 Shipping
Condition: Used Location: Sheffield, United States
(1MATCHED SET OF 4 ALL GROUND TOGETHER)OWNED BY TOOLMAKER MADE OF HARDENED AND PRECISION GROUND TOOL STEEL USED BY WATCHMAKERS, MACHINIST AND TOOLMAKERS ALIKE. BLOCKS ARE IN EXCELLENT CONDITION HAVING BEEN ORIGINALLY GROUND USING A HERMANN SCHMIDT SQUARING BLOCK AND MAGNA-SINE ON A BALL-WAY SURFACE GRINDER IN.
0 bids $22.50 Shipping
Condition: Used Location: Sheffield, United States
SPECIAL ORDER STARRETT 384 PARALLELS. VERY NICE IN THE BOX STARRETT No. 384 PARALLEL SET (8 TOTAL PARALLELS (4 ) FACTORY MATCHED PAIRS) WITH FACTORY WOODEN BOX AND PAPER-WORK SHOWN. ALL ARE ORIGINAL STARRETT 384 PARALLELS IN THIS SET.
0 bids Free Shipping
Condition: Used Location: Greenville, United States
Very nice shape clean smooth ground.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： BRAND NEW 9 Pairs Wavy Parallel Set 1/2 to 1-1/2 Gages Harden Steel Machinist Tool .0002'' Material: High Quality Spring Steel Each Parallel Hardened and Precision Ground For Use On Precision Clamping For Drilling, Milling, Boring, Grinding, And Assembly Operations 9 Pairs: 1/2" To 1-1/2" x 1/8" Increments +/- .0002" Parallelism Thickness Of The Spring Steel 0.3mm.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature?? 9 Pairs Wavy Parallel Set 1/2 to 1-1/2 Gages Harden Steel Machinist Tool .0002'' Material: High Quality Spring Steel Each Parallel Hardened and Precision Ground For Use On Precision Clamping For Drilling, Milling, Boring, Grinding, And Assembly Operations 9 Pairs: 1/2" To 1-1/2" x 1/8" Increments +/- .0002" Parallelism Thickness Of The Spring Steel 0.3mm Description?? The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind .
0 bids $19.50 Shipping
Condition: Used Location: Sheffield, United States
FLAT ANGLE GAGE BLOCKS. 12 TOTAL BLOCKS HERE AS SHOWN. EVERY BLOCK IS STAMPED WITH ANGLE AND INITIALS AS SHOWN. I HAVE SEVERAL SETS OF HIS BLOCKS AND PARALLELS ON NOW ALL ARE EXCELLENT! TRIANGLES 1/2 , 1 , 2 3 , 4 , 5 , 1 0 , 15 , 20 ,25 , 30 , 45 .
0 bids $25.00 Shipping
Condition: Used Location: Sheffield, United States
3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN.
0 bids $18.00 Shipping
Condition: Seller refurbished Location: Sheffield, United States
TOOLMAKER OWNED PRECISION GROUND ANGLE PLATE (1) WITH TAPPED HOLES,RAIL AND VEE'S AS SHOWN.25" WIDE. THIS PLATE CAN BOLT DIRECTLY TO YOUR BRIDGEPORT MILL IF NEEDED OR TO OTHER PRECISION TOOLING. BLOCK HAS (39)1/4X 20 HOLES IN FACES AND (24) 10 X 32"TAPPED HOLES IN SIDES, TOP AND ENDS AS SHOWN IN PICS.
0 bids $25.00 Shipping
Condition: Used Location: Sheffield, United States
3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN.
0 bids $25.00 Shipping
Condition: Used Location: Sheffield, United States
3/4" WIDE X 5-1/4" LONG INSPECTION TOOL IN GREAT USED CONDITION AS SHOWN. USA A M E R I C A N TOOLMAKER OWNED (1) 3/4" WIDE X 5-1/4" LONG FACTORY PRECISION GROUND AND IN GREAT USED CONDITION AS SHOWN.
0 bids $22.50 Shipping
Condition: Used Location: Sheffield, United States
FLAT ANGLE GAGE BLOCKS. MOST BLOCKS ARE STAMPED WITH ANGLE AND INITIALS AS SHOWN. WE REGULARLY USE THESE UP AGAINST AN ANGLE PLATE TO SLIDE DRESS ANGLES ON GRINDING WHEELS, SAVES WEAR AND TEAR ON YOUR HERMANN SCHMIDT RADIUS DRESSERS OR J&S RADIUS DRESSERS OR WHATEVER TYPE YOU DO USE.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Precision V-block Cast Iron Steel V-shaped Table. Used for the detection, marking and positioning of precision axilan parts, etc. 054103 Steel V-shaped Table 2pcs/box. ▲ 6 months' warranty for the machines, not for the consumables.
0 bids $9.89 Shipping
Condition: New Location: , China
The utility model is mainly used for placing circular workpieces such as shafts, sleeves, disks, etc., so as to find the central line and draw out the central line. General V block is a pair of two pieces, two pieces of flat and V groove are installed in a grinding out.
|
|
|
|