|
|
Order by: |
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Wide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description This Power Milling Head Is Made of High-quality Pig Iron Which Is Durable, Sturdy, and Has a Long Service Life. It Has a Painted Surface Design That Is Wear-resistant and Rust-resistant. in Addition, Its Rotational Speed Can Be up to 6000 Rpm to Improve the Working Efficiency. It Is Suitable for a Variety of Specialized Machines. Package Included 1* Power Milling Head Notes We Strongly Recommend Professional Installation. Please Contact Us If You Have Any Questions. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
0 bids $70.00 Shipping
Condition: New Location: 龙岗区, China
800W Water Cooled Spindle Motor 110V&1.5KW VFD Inverter for CNC Router Engraving.
Buy It Now
$50.00 Shipping
Condition: New Location: , China
800W 0.8KW Air Cooled Spindle Motor ER11 220V 24000rpm 65mm. 1 x 0.8KW 800W Air-cooled Spindle Motor (ER11, 220V, 24000rpm, 65mm, 4 bearing, 400Hz ). 0.8KW ER11 Air-cooled Spindle motor Engraving milling Grind.
Buy It Now
$180.00 Shipping
Condition: New Location: , China
1 x3KW ATC Water Cooled SpindleAutomatic Tool Changer Motor 220V,24000rpm,7.6A,400HZ,100MM. Spindle model. 1 x BT30-ER25 Tool holder with 45° pull stud. Spindle blowing dust/seal gas pressure (MPa). 3.7KW (220V).
Buy It Now
$80.00 Shipping
Condition: New Location: , China
Cooling: water cooling Spindle Weight: 2.5kg. Cooling: water cooling Spindle Weight: 3kg. Spindle Weight: 4kg. Spindle Weight: 6.0kg. Spindle Weight: 9.0kg. Speed :0-24000 rev / min. Nut Model: ER11-A-type Cooling: water cooling.
Buy It Now
Free Shipping
Condition: New Location: 龙岗区, China
3KW/3.2KW Water-cooled Spindle Motor ER20 24000rpm 220V 380V 400Hz 3Beaings CNC Router Engraving Machine Woodworking Size: φ100*220MM 400Hz 24000rpm Bracket hole diameter: 6mm/12.7mm Water-cooled.
Buy It Now
Free Shipping
Condition: New Location: , China
Specifications: 555. 1 x Spindle Motor for EleksMill. Model: 771303. - Not included the shaft coupling, you can use the original coupling of your EleksMill.
Buy It Now
$139.00 Shipping
Condition: New Location: , China
1 x 4KW Air cooled spindle motor ER25 220V 4pcs bearings 24000rpm 400Hz. 4KW ER25 Air-cooled Spindle motor Engraving milling Grind. 16x ER25 Collet ( 2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm,14mm,15mm,16mm,3.175mm each 1pcs ).
Buy It Now
Free Shipping
Condition: New Location: , China
Speed: 18000rpm. Collet: ER20. (1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
Buy It Now
$12.00 Shipping
Condition: New Location: , China
Specification: 75W CNC spindle motor water pump 3.2m 220V. 75W CNC spindle motor water pump 3.2m 220VAC. 75W Water Pump spindle motor water-cooled circle pump For Engraving machine CNC. 75W Pump 220V Water-cooled Spindle Motor Circle Pump For CNC Engraving Machine.
0 bids Free Shipping
Condition: New Location: , China
Collet: ER11. Power: 800W. Cooling: water cooling. Toy & Hobbies. Speed: 0 - 24000rpm. Frequency: 400Hz. Current: 5A. Size: 65 195mm.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
$80.00 Shipping
Condition: New Location: , China
Cooling: water cooling Spindle Weight: 2.5kg. Cooling: water cooling Spindle Weight: 3kg. Spindle Weight: 4kg. Spindle Weight: 6.0kg. Spindle Weight: 9.0kg. Speed :0-24000 rev / min. Nut Model: ER11-A-type Cooling: water cooling.
0 bids Free Shipping
Condition: New Location: Chino, United States
4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Material: Aluminum, Wood. With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
Buy It Now
$130.00 Shipping
Condition: New Location: , China
1 x 1.8KW Automatic Tool Change Water cooled Spindle Motor 220V,5.4A,24000rpm,80MM,400HZ. RTM80-20-24Z/1.8 220V. Automatic tool changer electric spindle outline drawing. Spindle model Spindle blowing dust/seal gas pressure (MPa).
0 bids Free Shipping
Condition: New Location: Elk Grove, United States
2.2KW AC220V Spindle for CNC machine. - Accuracy: 0.025mm. Germany made ball bearing. - Power connector: GX16 water proof (1,2,3,4) = (U,V,W) where 4 =Ground. - Power: 2.2KW (3 horse power). - Case: Stainless steel 304.
Buy It Now
$27.00 Shipping
Condition: Used Location: Glen Mills, United States
Buy It Now
Free Shipping
Condition: New Location: City of Industry, United States
1 x 1.5KW ER16 Water Cooled Spindle Motor. Model: ER16. 3KW ER20 Water-cooled Spindle 4 Bearings Motor Grind Mill Engraving CNC New. Engraving Machine. Spindle Motor And Inverter. 2.2KW Huanyang Inverter VFD Water Cooled Spindle ER20 Motor Pump Pipe Collet Set.
Buy It Now
$7.79 Shipping
Condition: Brand New Location: Darwin, AU
0 bids Free Shipping
Condition: New Location: Pomona, United States
Brand new - Zhong Hua Jiang CNC Spindle CNC Motor 220V 2.2KW 2200W Air Cooled Spindle Motor 80mm 4 Bearings 24000RPM 400HZ forCNC Router Machine
0 bids Free Shipping
Condition: New Location: , China
Type:Air Cooling DC Brushless Spindle Motor. Features of DC Spindle DC Spindle Motorspecification No load speed:12000r/m. Output Power:500W. we very glad to solve all problem with you. Application Fields.
0 bids Free Shipping
Condition: New Location: , China
Collet: ER11. Power: 800W. Cooling: water cooling. Speed: 0 - 24000rpm. Bearings: 4 bearings.
Buy It Now
Free Shipping
Condition: New Location: , China
Collet: ER20. (1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
0 bids Free Shipping
Condition: New Location: , China
(Type:Air Cooling DC Brushless Spindle Motor. Features of DC Spindle DC Spindle Motorspecification No load speed:12000r/m. Output Power:500W. excluded.).
Buy It Now
$55.00 Shipping
Condition: New Location: , China
1 x0.8Kw 800W Quanlity Air-cooled spindle motor ( ER11 ,220V,24000rpm, dia 65mm,4 bearing,400Hz). 0.8KW ER11 Air-cooled Spindle motor Engraving milling Grind. Collet size: ER11. Quality 0.8KW 800W Air Cooled Spindle Motor ER11 24000rpm 65mm Engraving Milling.
0 bids Free Shipping
Condition: New Location: 龙岗区, China
800w Water Cooled Spindle Motor 24000rpm 110V For CNC Engraving. 1 x 800W Spindle Motor: GDZ-65-800C. Stepper Motor & Driver. CNC Spindle Motor & Tool Parts. motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping
Condition: New Location: , China
500W High Power Spindle: Load Speed: 0-11000rpm/min, Max. 1 x 4540 Machine. Spindle power: 500W. 1 x 500W Spindle. Engraving & Cutting & Drilling: You can use this CNC machine for woodworking. Spindle speed: Load Speed 0-11000rpm/min; Max.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description This Power Milling Head Is Made of High-quality Pig Iron Which Is Durable, Sturdy, and Has a Long Service Life. It Has a Painted Surface Design That Is Wear-resistant and Rust-resistant. in Addition, Its Rotational Speed Can Be up to 6000 Rpm to Improve the Working Efficiency. It Is Suitable for a Variety of Specialized Machines. Package Included 1* Power Milling Head Notes We Strongly Recommend Professional Installation. Please Contact Us If You Have Any Questions. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
Buy It Now
$75.00 Shipping
Condition: New Location: , China
(1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
Buy It Now
$139.00 Shipping
Condition: New Location: , China
(380V, 18000rpm, 4 bearing, 300Hz, Runout off<=0.0 1mm). 1 x High Quality 4.5KW Square Air Cooled spindle motor ER32. 4.5KW ER32 Air-cooled Spindle motor Engraving milling Grind. Collet size: ER32. Wiring: The spindle’s 1 connect Inverter’s U,spindle’s 2 connect Inverter’s V,spindle’s 3 connect Inverter’s W,spindle’s GND connect Ground,Spindle’s 4 and 5 connect thermistor,no need connector,the inverter’s R S T any 2 pins connect 220VAC.
Buy It Now
$80.00 Shipping
Condition: New Location: , China
1 x 1.5KW ER16 Water cooled spindle motor ( 220V, 80mm, 24000rpm, 400Hz, 4 Bearing ). 11 x ER16 Collet (1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm each 1pcs ). Collet size: ER16. ER16 Spring Collet (1mm-10mm).
Buy It Now
Free Shipping
Condition: New Location: , United States
1x 4G USB flash drive include the english user manual & GRBL software. Our parcel include a4G USB flash drive ,you can download theenglish user manual and GRBL software from the flash drive. GRBL software.
0 bids Free Shipping
Condition: New Location: 龙岗区, China
ER16 CNC Spindle Motor 2.2KW Air Cooled 4 Bearing D80mm 24000rpm Woodworking 220V for Router Engraving Milling Machine Package included : 1 x 2.2KW Spindle Motor Electronic Spindle Motor : Spindle length: 195mm Speed: 0 ~ 24000rpm Working Voltage : 220V Working Current : 5A Cooling: air-cooled Material: 304 stainless steel Bearing configuration: 2X7006CP4 , 2X7003CP4 DT , 4 bearings Maximum speed: 24,000 rev / min Maximum operating frequency: 400Hz Radial runout: 0.01mm Coaxial degree: 0.025mm Dimensions: 80*195mm Clamping diameter: ER16 collet, Nut model: ER16 type Speed mode: through the inverter to adjust the output voltage and frequency can be achieved 0-24000 stepless Cooling: air cooling mode Lubrication: high temperature grease.
0 bids Free Shipping
Condition: New Location: , China
Specifications: 555. 1 x Spindle Motor for EleksMill. Model: 771303. - Not included the shaft coupling, you can use the original coupling of your EleksMill.
0 bids Free Shipping
Condition: New Location: 龙岗区, China
1 x 1.2KW Spindle Motor 60000RPM. Speed(R/Min) 60000RPM. Collet ER11. Frequency 1000HZ. Stepper Motor. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide.
Buy It Now
Free Shipping
Condition: New Location: 龙岗区, China
3.7KW Water-Cooled Spindle Motor ER20 24000rpm 400Hz for CNC Router Engraving Package Included : 1 x 3.7KW Spindle Motor 220V / 380V 1 x Air Plug 1 x 3.175 & 6mm Spring Collet Specifications : Model No GDZ100-3.7 Power 3.
0 bids Free Shipping
Condition: New Location: Chino, United States
4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Accurate engraving is not possible without an engraving machine. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
0 bids Free Shipping
Condition: New Location: , China
1 x ER11 Collet. Collet Part Length: Approx. 45mm / 1.8in. 1 x Collet Nut. Feature: 1. m torsion. 52mm / 2in. Item Type: Spindle Motor.
Buy It Now
Free Shipping
Condition: New Location: Midway City, United States
Color 2.2KW 220V. Speed 24000 RPM. Power Source AC. Part Number RTM-GDZ80F-2.2B.
Buy It Now
Free Shipping
Condition: New Location: , United States
Manufacturer model:ytx-110V-1.5KW ER11 air kit. We take our reputation seriously.
Buy It Now
$90.01 Shipping
Condition: New Location: , China
1 x 3KW ER20 Water-cooled Spindle Motor (220V,400Hz,24000rpm,4 bearing). 1 Set ER20 Collet 14Pcs (1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm ). Power: 3Kw. 3kw Inverter VFD with 2m extension cable 220V.
0 bids Free Shipping
Condition: New Location: , China
Collet: ER11. (1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
Buy It Now
$18.01 Shipping
Condition: New Location: , China
1 x 100mm Aluminum Cast Mount Bracket.
0 bids Free Shipping
Condition: New Location: , China
Collet: ER11 (standard 6mm). Cooling: water cooling. Speed: 0 - 24000rpm. Size: Φ80 188mm. Power: 1.5KW.
Buy It Now
Free Shipping
Condition: New Location: , China
Shaft Shaft: approx. Motor Length: approx. 67mm (excluding shaft). Axis Motor Shaft Length: approx. Motor Step Height: approx. Speed: 4000~12000 rev/min.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. Aluminum Alloy: The Z axes spindle motor bracket is made of premium aluminum alloy for better rigidity and durability. High strength, longer service life. Item Type: Z Axes Motor Mount.
0 bids $55.00 Shipping
Condition: Used Location: , China
We are willing to provide the good service,professional technology and excellent products to you. We have specilized in all kinds of PLC/CNC products for more than 14 years.
0 bids $99.00 Shipping
Condition: New Location: , China
CNC Engraving Machine Tool 220V 2. 2K W Air Cooled Square Spindle Motor ER20. 1 x 2.2kw Air Cooled CNC Spindle Motor. Speed: 10 ~ 24000rpm. Power: 2.2KW. Frequency: 0 ~ 400Hz.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description This Power Milling Head Is Made of High-quality Pig Iron Which Is Durable, Sturdy, and Has a Long Service Life. It Has a Painted Surface Design That Is Wear-resistant and Rust-resistant. in Addition, Its Rotational Speed Can Be up to 6000 Rpm to Improve the Working Efficiency. It Is Suitable for a Variety of Specialized Machines. Package Included 1* Power Milling Head Notes We Strongly Recommend Professional Installation. Please Contact Us If You Have Any Questions. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
0 bids Free Shipping
Condition: New Location: City of Industry, United States
Model: ER16. 1 x 1.5KW ER16 Water Cooled Spindle Motor. 3KW ER20 4 Bearings Water-cooled Spindle Motor Drill Bit CNC Mill Carving 100MM. 1.5KW ER11 Water-cooled Spindle Motor 80mm Clamp Variable Frequency Drive VFD HQ.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Description This Power Milling Head Is Made of High-quality Pig Iron Which Is Durable, Sturdy, and Has a Long Service Life. It Has a Painted Surface Design That Is Wear-resistant and Rust-resistant. in Addition, Its Rotational Speed Can Be up to 6000 Rpm to Improve the Working Efficiency. It Is Suitable for a Variety of Specialized Machines. Package Included 1* Power Milling Head Notes We Strongly Recommend Professional Installation. Please Contact Us If You Have Any Questions. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
0 bids Free Shipping
Condition: New Location: City of Industry, United States
3KW ER20 Water-cooled Spindle 4 Bearings Motor Free Collet Drill Bit Engraving. 【4 pieces of bearings inside】This 3kW ER20 air-cooled spindle motor includes four bearings instead of three, which make it more stable to operate.
0 bids Free Shipping
Condition: New Location: , China
Collet: ER11. Power: 800W. Cooling: water cooling. Toy & Hobbies. Speed: 0 - 24000rpm. Frequency: 400Hz. Current: 5A. Size: 65 195mm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description This Power Milling Head Is Made of High-quality Pig Iron Which Is Durable, Sturdy, and Has a Long Service Life. It Has a Painted Surface Design That Is Wear-resistant and Rust-resistant. in Addition, Its Rotational Speed Can Be up to 6000 Rpm to Improve the Working Efficiency. It Is Suitable for a Variety of Specialized Machines. Package Included 1* Power Milling Head Notes We Strongly Recommend Professional Installation. Please Contact Us If You Have Any Questions. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
0 bids Free Shipping
Condition: New Location: , United States
Why Choose VEVOR?. VEVOR 2.2KW CNC Water Cooled Spindle Motor ER20 VFD Clamp Pump Pipe Collet 110V. VEVOR 2.2KW Water-Cooled Spindle Motor ER20 Cooling Engraving Milling Grinding. VEVOR Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Accurate engraving is not possible without an engraving machine. Standard Spindle: 42mm High-Speed Spindle / ER11 Chuck / 3.175mm Clamping Centre. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
0 bids Free Shipping
Condition: New Location: Chino, United States
4040 CNC Machine Kit The engraving machine with the industrial-grade chip and 75W high-power spindle motor takes a very short time to complete the engraving, which is more highly efficient. The aluminum frame engraving machine is more durable, stronger, and has a long service life.
|
|
|
|