|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Accurate engraving is not possible without an engraving machine. Wide Application: With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects. DIY: The mini DIY engraving machine can be used to make gifts for your friends and exercise your hands-on skills.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Wide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
0 bids $20.00 Shipping
Condition: New Location: Chino, United States
Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Wide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
0 bids Free Shipping
Condition: New Location: Chino, United States
Package Included 1 Set* cutter 1* Z Probe 1* Right-Y-axis 1* U Disk 1* USB 1* Power Supply 1*Power Cable 4* Clamps 1*Manual Other Accessories for Installation.
0 bids Free Shipping
Condition: New Location: Chino, United States
4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Material: Aluminum, Wood. With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
0 bids Free Shipping
Condition: Used Location: Osseo, United States
Model # : 025381. Collet Mount: 1 7/8"-2.0M. your account number during checkout. If you do not have an account No Worries! More Information SKU# SB-107198.
Buy It Now
Free Shipping
Condition: New Location: , China
(1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
Buy It Now
$105.00 Shipping
Condition: New Location: , China
1 x Square 3KW Air Cooled Spindle Motor ER20 220V/AC (18000rpm,300Hz,4pcs bearings). 14 x ER20 Collet (1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm each 1pcs). Collet size:ER20.
Buy It Now
Free Shipping
Condition: New Location: , China
1 x 3.5kw Air cooled Spindle Motor with a ER25 collect. GDZ93X82-3.5(380V). GDZ93X82-3.5(220V). Spindle length: 248.5mm. (5) During the operation, if the fixture card spindle rotor end, non-beat way to remove Jigs.
Buy It Now
Free Shipping
Condition: New Location: , China
Buy It Now
$120.00 Shipping
Condition: New Location: , China
1 xSquare 2.2KW Air Cooled Spindle Motor ER20 (220V,24000rpm,4 bearing,400Hz,Runout-off<=0.01mm). 4 x ER20 Collet (4/6/8/10mm each 1Pcs,0.008mm accuracy). Collet size: ER20. Wiring:open the Junction Box, The spindle’s "U1" connect Inverter’s U,spindle’s "V1" connect Inverter’s V,spindle’s "W1" connect Inverter’s W,Ground no need connector,the inverter’s R S T any 2 pins connect 220VAC.
Buy It Now
$15.00 Shipping
Condition: Used Location: , PL
With 24V DC spindle motor ER11. CompleteZ axis head motor mount. 6200 RPM @ 3A 24V.
0 bids $210.00 Shipping
Condition: New Location: 龙岗区, China
Speed 18000rpm. Collet ER32 12.7mm default. 1 x 4.5KW sunfar VFD Variable Frequency Drive. Stepper Motor. 4.5KW VFD Specification VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
It is safer with a case to keep the spindle and dust inside while engraving. This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
$199.00 Shipping
Condition: New Location: , China
1 x 3.5kw Air cooled Spindle Motor with a ER25 collect. GDZ93X82-3.5(380V). GDZ93X82-3.5(220V). Spindle length: 248.5mm. (5) During the operation, if the fixture card spindle rotor end, non-beat way to remove Jigs.
0 bids Free Shipping
Condition: New Location: Chino, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
Free Shipping
Condition: New Location: 龙岗区, China
3KW/3.2KW Water-cooled Spindle Motor ER20 24000rpm 220V 380V 400Hz 3/4Beaings CNC Router Engraving Machine Woodworking Advantages : 100% Brand new and high quality High quality aluminum body Noise reduction upgrades ,less noise Water-cooling, Better cooling effect More fast speed, more high efficiency Durable, long working hours Benefits for you (1) With higher cost performance (2) A variety of models are available (3) Simple appearance, high quality.
0 bids Free Shipping
Condition: New Location: Chino, United States
It is safer with a case to keep the spindle and dust inside while engraving. This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly.
Buy It Now
$173.00 Shipping
Condition: New Location: , China
Chuck nut: ER25 1-16MM. Speed: 18,000 rpm. Frequency: 300Hz.
Buy It Now
Free Shipping
Condition: New Location: , China
Collet: ER32. (1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
0 bids Free Shipping
Condition: New Location: Chino, United States
It is safer with a case to keep the spindle and dust inside while engraving. This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit 5W and 20W modules directly, but also can upgrade to 300W spindle directly.
0 bids Free Shipping
Condition: New – Open box Location: Columbus, United States
Introducing the Genmitsu Aluminum XZ Axis Spindle Motor Mount, designed to fit 52mm diameter spindles for the 3018-PRO CNC Router. This machine accessory is made with high-quality aluminum and features a spindle holder for secure and stable placement during use. The mount's dimensions are 9.57 x 7.72 x 5.08 inches, and it weighs 4.25 pounds for easy installation and portability. Its blue color gives it a sleek and professional look, and it is manufactured by Genmitsu. Add this spindle motor mount to your woodworking equipment and take your CNC routing to the next level.
0 bids Free Shipping
Condition: New Location: Chino, United States
Power: 1.5KW VFD. The machine can connect with computer as other external device such as printer, scanner. The spindle motor must connect with the VFD. VOLTS, current, power: AC110V, 60Hz, 5A,1.5 KW VFD.
Buy It Now
Free Shipping
Condition: New Location: , China
1 x5.5KW BT30 ATC Water Cooled Spindle Motor380V RTM125-30-18Z/5.5 Model. 1 x BT30-ER25 Tool Holder with 45° pull stud. BT30-ER25 tool holder with 45° pull stud.
Buy It Now
Free Shipping
Condition: New Location: , United States
Easy to install: install the adapter plate, and then install the spindle mount, only need to unscrew a few screws. Ingenious Design: keep the high stability of the main shaft, and the size is suitable.
0 bids Free Shipping
Condition: New Location: , China
Collet: ER11 (standard 6mm). 1 x 1.5KW CNC Spindle Motor. Cooling: water cooling. Speed: 0 - 24000rpm. Weight: appr. Grease Lubrication. Bearings: 3 bearings.
0 bids $29.49 Shipping
Condition: New Location: , China
Collet size: ER11, 6mm. 1 X 1.5kw Air Cooled CNC Spindle Motor. Speed: 10 ~ 24000rpm. Power: 1.5KW. Weight: 4kg. Cooling: air-cooled.
Buy It Now
$83.99 Shipping
Condition: New Location: , China
Collet: 1.5KW ER11 2.2KW ER20. 1 x Square Air-cooled Spindle Motor. Speed: 0-24000 rpm. Power: 1500W/2200W. Coo ling : Air cooling.
0 bids Free Shipping
Condition: New Location: Chino, United States
4040 CNC Machine Kit. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). With an effective engraving area of 400 400 83mm, the machine can easily accommodate most projects.
0 bids Free Shipping
Condition: New Location: , China
Collet size: ER11, 6mm. 1 X 1.5kw Air Cooled CNC Spindle Motor. Toy & Hobbies. Speed: 10 ~ 24000rpm. Current: 5A. Power: 1.5KW. Weight: 4kg. Helpful Links.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Manufacturer AnoleX. Material aluminum, Aluminium. Included Components Spindle Holder. Ingenious Design: keep the high stability of the main shaft, and the size is suitable. Easy to install: install the adapter plate, and then install the spindle mount, only need to unscrew a few screws.
0 bids $48.33 Shipping
Condition: New Location: , China
20VDC-48VDC requires brushless drive and motor to operate. 12000RPM DC brushless motor. Speed: 2000-12000 RPM support stepless speed regulation/external 10V analog speed regulation need a driver. Max speed: 12000RPM.
Buy It Now
$135.00 Shipping
Condition: New Location: , China
1 xSquare 4.5KW Air Cooled Spindle Motor ER32 (380V,18000rpm,4 bearings,300Hz,Runout-off<=0.01mm). Collet size: ER32. Note: only have 380V Version. Wiring: The spindle’s 1 connect Inverter’s U,spindle’s 2 connect Inverter’s V,spindle’s 3 connect Inverter’s W,spindle’s GND connect Ground,Spindle’s 4 and 5 connect thermistor,no need connector,the inverter’s R S T any 2 pins connect 220VAC.
0 bids Free Shipping
Condition: New Location: 龙岗区, China
ER20 Spindle Motor 3KW 0.01mm Runout 380V 24000rpm High Speed CNC Router Engraving Machine Spindle Model: GDZ100-3-380V Power: 3KW (3000w) Voltage: 380V Current: 6A Diameter: 100mm Folder knife diameter : 3.175, 4, 6, 12.7 mm Spindle length: 220mm Speed : 0 ~ 24000rpm Cooling: water-cooled Material: 304 stainless steel Voltage and current: AC380V common household electric, must through the inverter output Bearing configuration: four bearings 2X7005CP4 , 2X7003CP4 DT Maximum speed: 24,000 rev / min Maximum operating frequency: 400Hz Radial runout: 0.01mm Coaxial degree: 0.025mm Dimensions: 100 * 220mm Clamping diameter: ER20 collet Nut model: ER20-M type or A-type optional Speed mode: through the inverter to adjust the output voltage and frequency can be achieved 0-24000 stepless.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
Free Shipping
Condition: New Location: , United States
1610 Pro cnc machine is very easy to install,stable structure. If you change the spindle to a module,then also can carve the kraft paper, wood, leather(wallet), bamboo, rubber. if you change the spindle to a 3pins module,also can carve thekraft paper, wood, leather(wallet), bamboo.
Buy It Now
$29.50 Shipping
Condition: New Location: , China
Collet size: ER11, 6mm. 1 X 1.5kw Air Cooled CNC Spindle Motor. Toy & Hobbies. Speed: 10 ~ 24000rpm. Power: 1.5KW. Weight: 4kg. Helpful Links. Current: 5A.
0 bids Free Shipping
Condition: New Location: Chino, United States
Accurate Engraving Is Not Possible Without an Engraving Machine. 1 Set cutter. Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Setting). Wide Application: with an Effective Engraving Area of 400 400 83mm, the Machine Can Easily Accommodate Most Projects.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description This Power Milling Head Is Made of High-quality Pig Iron Which Is Durable, Sturdy, and Has a Long Service Life. It Has a Painted Surface Design That Is Wear-resistant and Rust-resistant. in Addition, Its Rotational Speed Can Be up to 6000 Rpm to Improve the Working Efficiency. It Is Suitable for a Variety of Specialized Machines. Package Included 1* Power Milling Head Notes We Strongly Recommend Professional Installation. Please Contact Us If You Have Any Questions. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
0 bids $220.00 Shipping
Condition: New Location: 龙岗区, China
Speed : 13000rpm. Joint of nose : BT30 Taper. Stepper Motor Driver Kit. 1 x 5.5KW ATC spindle Motor. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide.
0 bids Free Shipping
Condition: New Location: , United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
Free Shipping
Condition: New Location: , China
Collet: ER20. (1) Before the boot, first ensure that the spindle cooling system to work properly, and then turn the power spindle. Do not use the spindle without the cooling conditions, it is necessary to check the fan and pump are working properly before use.
Buy It Now
$90.00 Shipping
Condition: New Location: , China
Spindle motor: 500w Spindle, Max.11000rpm. 500W Spindle & High Speed. The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
Buy It Now
Free Shipping
Condition: New Location: , United States
1x 500W DC spindle. [High precision and stability] :It does not contain any plastic parts. Milling cutter: 3.175mm. 1x Z Axis Probe tool. [Wide compatibility, easy assembly]: CNC engraving machine is compatible with GRBL software and supports.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
4040 CNC Machine Kit The engraving machine with the industrial-grade chip and 75W high-power spindle motor takes a very short time to complete the engraving, which is more highly efficient. The aluminum frame engraving machine is more durable, stronger, and has a long service life. Specification Material: Aluminum, Wood Maximum Workpiece Thickness: 78mm/3.07inch Effective Stroke: 400*400*83mm/15.75*15.75*3.27inch Drive Power: 12v 5a Spindle Power: 75w Voltage: 110v Power: 100w Spindle Speed: 0-10000rpm Spindle Accuracy: Radial Runout ≤ 0.05mm Stepper Motor: 42 Two-phase Stepper Motor Rotation Speed: 6000rpm Acceptable Software: Grbl/Candle Communication Interface: Usb Gross Weight: 12kg/26.46lbs Engraving Speed: 50-1500mm / Min (Depending on the Material Speed Set.
0 bids Free Shipping
Condition: New Location: Chino, United States
This 6040 machine is suitable for industry, Technology Research, Advertising Design. The spindle motor must connect with the VFD. VOLTS, current, power: AC110 /60Hz, 5A, 1.5KW VFD. The machine can connect with computeras other external device such as printer, scanner.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Package Included (Note：No Laser Head Included) 1*Engraving Machine 1*Adapter 8*T-nuts 1 Box*Gouges 3*Power Cords 8 Bag*Screws 6*Installation Tools 1*English Manual.
0 bids $41.73 Shipping
Condition: Brand New Location: , China
Type:Air Cooling DC Brushless Spindle Motor. Features of DC Spindle DC Spindle Motorspecification No load speed:12000r/m. Output Power:500W. 100% Money Back. However, we will try our best to minimize it.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. m torsion. Idle Speed: 12000RPM. 1 x ER11 Collet. Collet Part Length: Approx. 45mm / 1.8in. 1 x Collet Nut. Spindle Radial Runout: 0.01-0.03 high accuracy.
0 bids Free Shipping
Condition: New Location: Chino, United States
Feeding height: ≤140mm(From base of Z axis to platform). X axis:SFU1605 Ball Screws. PCB Engineer. Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis: ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
Buy It Now
$220.00 Shipping
Condition: New Location: , China
1 xSquare 4.5KW Air Cooled Spindle Motor ER32 (380V,18000rpm,4 bearing,300Hz,Runout-off<=0.01mm). Collet size: ER32. The input for this VFD is 1 or 3 phase as you like. 5.5KW VFD 380V. Wiring: The spindle’s 1 connect Inverter’s U,spindle’s 2 connect Inverter’s V,spindle’s 3 connect Inverter’s W,spindle’s GND connect Ground,Spindle’s 4 and 5 connect thermistor,no need connector,the inverter’s R S T any 2 pins connect 220VAC.
Buy It Now
$160.00 Shipping
Condition: New Location: , China
6KW Air cooled Spindle Motor 380V 18000RPM ER32 4Bearing. 1 xSquare 6KW Air Cooled Spindle Motor ER32 (380V,18000rpm,4 bearings,300Hz,Runout-off<=0.01mm). Collet size: ER32. Note: only have 380V Version.
0 bids $48.33 Shipping
Condition: New Location: , China
20VDC-48VDC requires brushless drive and motor to operate. 12000RPM DC brushless motor. Speed: 2000-12000 RPM support stepless speed regulation/external 10V analog speed regulation need a driver. Max speed: 12000RPM.
Buy It Now
Free Shipping
Condition: New Location: , United States
[Wide compatibility, easy assembly]: CNC engraving machine is compatible with GRBL software and supports. 1 x 500W DC spindle. Stepper Motor: 42 step motor 1.68A 0.55N.M. [High precision and stability] : It does not contain any plastic parts.
Buy It Now
$77.00 Shipping
Condition: New Location: , China
1 x 2.2KW Air Cooled Spindle Motor ER20 ( 80x230mm,220V,400Hz,24000rpm,4 bearing ). 2.2KW ER20 Air-cooled Spindle motor Engraving milling Grind. Collet size: ER20 3.175 mm,4mm ,6 mm,8mm,10mm,12.7mm (one spindle with 1 collet).
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Material Aluminium. Included Components Spindle Holder. Ingenious Design: keep the high stability of the main shaft, and the size is suitable. Easy to install: install the adapter plate, and then install the spindle mount, only need to unscrew a few screws.
0 bids Free Shipping
Condition: New Location: Chino, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design (Note：No Laser Head Included) Description: This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly. It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern. Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast asse.
|
|
|
|