|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits up to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims All working parts hardened and precision ground .
0 bids $5.95 Shipping
Condition: New Location: Tullahoma, United States
Buy It Now
Free Shipping
Condition: New Location: South El Monte, United States
Product Type: CAT40 ER32. This holder use the standard ER 16 collets. Low strength steel could lead crack and rust very soon, especially by the inside pocket area, accuracy will also drop only after a little while, so make sure avoid purchasing bad quality and unbalanced chucks.
0 bids Free Shipping
Condition: New Location: Kingman, United States
MANUFACTURER ALLIED MACHINE. MODEL #HTA3A01-150F.
Buy It Now
Free Shipping
Condition: New Location: , China
1 x Wrench. Fastener Type: Machine Screw. Head Style: Hex Head. Material: Steel.
Buy It Now
Free Shipping
Condition: New – Open box Location: Waterloo, United States
Buy It Now
Free Shipping
Condition: New Location: , China
Model:DCGT070204 -AK N01. 10pcsDCGT070208 -AK N01. Application: for aluminum, aluminum alloy and copper. Material:Aluminum Alloy. Process hardness: < HB180.
0 bids Free Shipping
Condition: New Location: Farmington, United States
Manufacturer: TMX. TMX Item Number: 6-765-123RU. Minimum Bore D. 93. Length L in 10. D min = 0.930 mm. Tolerance: L = +0.114/-0.0 mm. Tolerance: dØ = +0.0/-0.0020 mm.
Buy It Now
Free Shipping
Condition: New Location: Eugene, United States
Easy to use, they require no special training. Just place between flanges, adjust, and remove before bolting. Reusable and cost-effective, flange wedges withstand harsh conditions. 2 x Stainless Steel Flange Wedge.
Buy It Now
$15.95 Shipping
Condition: New Location: Diamond Bar, United States
Taper: CAT50 ER40. All of our products are 100% inspected. Balanced to G2.5 @10,000 RPM. Tested T.I.R: 0.0001".
0 bids Free Shipping
Condition: New Location: , United States
Compatibility:.
0 bids Free Shipping
Condition: New Location: Sheridan, United States
USA FULFILLED. The knurls are hardened & Pitch size are marked on the spare knurls to avoid any confusion. Epoxy Black Finish for a Rust Free Life. Knurled Body of the Pressure Cap Gives a Easy Grip for applying pressure on the work-piece while working.
Buy It Now
Free Shipping
Condition: New Location: Saint Charles, United States
Precision ground concentric. Ground shank and hole, heat treated for double accuracy. You may ask for freight cost before buying tools. If you need to speak to a sales person feel free to call. Phone: 1-630-443-3244.
0 bids Free Shipping
Condition: New Location: , United States
5、 9pcs different angles can cut out any model you want with high precision. 1piece MGEHR1010-1.5 holder with 1pcs MGMN150-G NC3020. 1piece SER1212H11 holder with 1pcs MMT11ERA60 US735. 1piece S08K-SCLCR06 holder with 1pcs CCMT060204 US735.
0 bids $5.95 Shipping
Condition: New Location: Tullahoma, United States
Buy It Now
Free Shipping
Condition: New Location: , China
Paclcage incluole:6pcs BAP300R Indexable End Mill with wrench + 10pcs APMT1135 inserts. About the APMT1135 Inserts:Machinable hardness: Hrc 45°-- 60° For shoulder milling, face milling and slotting,machine Quenched Steel /Steel /Titanium alloy /Stainless steel / Cast iron.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
20pcs M2 HSS #4 center drills 1/8x5/16x2-1/8" #530-4001/8" flute diameter 5/16" shank body diameter2-1/8" overall length Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
0 bids Free Shipping
Condition: Used Location: Oxnard, United States
Buy It Now
$6.99 Shipping
Condition: New Location: Aliso Viejo, United States
NEW 10PCS. GRADE: TIN COATED.
Buy It Now
$2.60 Shipping
Condition: New Location: , China
Wrench: T8. screw: 2.5 6. applicated inserts: CCMT0602 .
Buy It Now
$11.80 Shipping
Condition: New Location: Saint Charles, United States
SHARS NUMBER. "V" groove holds round shank boring bars and tools as well as square tool bits. "V" groove holds 1/2-3/4" round shank boring bars and tools as well as 1/2-3/4" square tool bits. Certificate for each batch.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. If you are not sure if this model is right for you, please feel free to contact us. .
Buy It Now
Free Shipping
Condition: New Location: South El Monte, United States
3pcs MT1 to MT2 MT2 to MT3 MT3 to MT4 Morse Taper Adapter Reducing Drill Sleeve. 3pcs MT1-MT2 MT2- MT3 MT3-MT4 Morse Taper Adapter Reducing Drill Chuck Sleeve. MT3 Spindle to MT1 Arbor Morse Taper Adapter Reducing Drill Sleeve For Lathe New.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: 2" Boring Head With R8 Shank Head size: 2" Boring bar Hole: 1/2" Cross Hole Dia: 1/2" Maximum Offset: 5/8" Thread: 1.5"-18 Graduations: 0.001/0-50 Center Distance bt 2 bottom hole: 0.60" With R8 Shank A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting When the direction of the dial is reversed, the backlash between the gear train is listed below..
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
IMPACT ADAPTER, Black Phosphate, Locking No, Output Drive 3/4 in (F) Square, Output Drive Shape Square, Output Drive Size 3/4 in, Output Drive Gender Female, Impact, Input Drive 1/2 in (M) Square, Input Drive Shape Square, Input Drive Size 1/2 in, Input Drive Gender Male.
Buy It Now
$10.00 Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: South El Monte, United States
Ejecting Drill Drifts. 1 x Ejecting Drill Drifts. Clamping for taper shank drills, taper shank milling cutters and taper shank cutters. Taper Adapter. 3, with a round hole，Suitable for storage. We will do our best to give you a satisfying solution.
Buy It Now
Free Shipping
Condition: New Location: Saint Charles, United States
Insert Style:TNMX, TNMZ, TNMM, TNMA, TNMG, TNMP, TNG, TNU. For Turning, Facing or Chamfering. Finger clamp #: CL-6. This unique skeleton design on the cutting edge improves toughness and anti-plastic deformation.
0 bids $10.95 Shipping
Condition: New Location: Tullahoma, United States
Insert Type: AOMT 1705 .
0 bids $5.00 Shipping
Condition: New Location: , China
0 bids $10.00 Shipping
Condition: New Location: Irvine, United States
10 PCS CCMT09T304 INSERTS FOR STEEL. LENGTH: 8IN. 1PCS PLASTIC BOX. with all of your machining requests.
0 bids Free Shipping
Condition: New Location: , China
0 bids $2.50 Shipping
Condition: New Location: , China
SPB326 26mm Parting Grooving Cut-Off Tool Holder +10pcs GTN-3 SP300 Inserts C#. Model: MGMN200-G LDA. 10Pcs CCMT060204 Inserts + S10K-SCLCL06 Lathe Turning Tools Boring Bar Holder C#. S06K-SCLCR06 6mm Lathe Boring Bar Tunring Tool Holder + 10X CCMT060204 Inserts.
Buy It Now
Free Shipping
Condition: New Location: , United States
Professional Grade PRECISION 1/2" SHANK BORING BAR SET. Minimum Boring- 5/16" - 9/16". Boring Depth- 3/4" to 3". Made of heat treated alloy steel.
Buy It Now
Free Shipping
Condition: New Location: Rosemead, United States
10-15" Swing. Turning And Facing Tools Can Be Locked Together. Unit Dim L x W x H (in) 3/4" Tool Bit Capacity - More Versatile Than The Standard #1 Holder.
Buy It Now
Free Shipping
Condition: New Location: , China
10 x Cut-Off Grooving Inserts. Blade height: approx. 1 x SPB326 Cut-Off Blade （ color random ）. High cutting efficiency, high wear resistance. Suitable for steel semi-finishing. Good precision, high toughness.
Buy It Now
Free Shipping
Condition: New Location: , China
Material: Tungsten Steel. Mainly used for steel, stainless steel finishing and semi-finishing rough machining. Shape:Triangular. Color: Gold (As pictures show).
0 bids $10.95 Shipping
Condition: Used Location: Tullahoma, United States
Cutter is in good, used condition. Insert Type: AOMT 1805 .
0 bids $15.00 Shipping
Condition: New Location: , China
50pcs APKT160408-PM YBG202.
0 bids Free Shipping
Condition: New Location: 金东区, China
Designed with Torx socket. Size: M2.5 x 6mm. 50 x M2.5 x 6mm screw. 1 x wrench. Head style: hexagon. Material: Steel. High strength and hardness, long service life.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature： AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits up to 7/16" Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II Description：.
Buy It Now
Free Shipping
Condition: New Location: Summerfield, United States
You can wash your collets in the rack with mineral spirits, brake clean, etc. or in an ultrasonic cleaner. The top radius and angle nests each collet properly & their Low profile makes them great for drawers.
Buy It Now
$4.75 Shipping
Condition: New Location: Nescopeck, United States
Steel Bushing/Standoff /Spacer/Sleeve 5/8 " OD x 5/16 ID x 3" Long. Made with 1018 steel.
0 bids $5.00 Shipping
Condition: New Location: , China
Good quality, very competitive price. ♥ We have our own production factory in China, which can customize the CNC tools for you. Made in China.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
Buy It Now
Free Shipping
Condition: New Location: Byron Center, United States
Quantity: 10 Inserts. Condition: New.
Buy It Now
Free Shipping
Condition: New Location: Saint Charles, United States
Tegara 3/4" ER20 Floating Tap Holder Made in Taiwan. Collet Series: ER20. Uses standard ER20 collet. ER20 collet nut is balanced. Fully ground on all critical surface including a pilot (dia. Made from alloy steel 5155 with heat treat to RC 56-58. ).
Buy It Now
Free Shipping
Condition: Used Location: Burlington, United States
Seco SDJCR-8-3 Indexable Turning Toolholder 1/2" Square Shank. Like n3w.
0 bids $0.99 Shipping
Condition: New Location: Monroe Township, United States
Good precision, high cutting efficiency. Wear resistant and deform resistant. Direction: right hand. 1 Lathe Turning Tool Kit.
Buy It Now
$17.39 Shipping
Condition: New Location: Eastlake, United States
ASK ABOUT PINT, QUART & 5 GALLON CONTAINERS AS WELL! NEED PARTS FOR YOUR BRIDGEPORT?. ASK ABOUT OUR SYNTHETIC AND WATER SOLUBLE COOLANTS IN GALLON AN 5 GALLON BUCKETS! Spindle Oil #10. PART # 002-0221.
Buy It Now
Free Shipping
Condition: New Location: , United States
1/2" Positive Stop Blade Cut-Off Set w/10 pc GTN-2 C5 Insert. Feature a "positive stop" to prevent insert drift and the blade pocket from spreading once the insert is set firmly in place. 10 pc GTN-2 C5 inserts.
Buy It Now
Free Shipping
Condition: New Location: Walton, United States
Designed with torx socket head.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： Contains 1 each R8 holders: 1/4", 3/8", 1/2", 5/8", & 3/4" diameters For double and single end (single end mill only for sizes over 5/8") Hardened and ground for durabilty and superior performance Crafted from alloy forged tool steel Drawbar End Thread: 7/16"-20 Package Including： R8 END MILL HOLDER SET 1/4" 3/8" 1/2" 5/8" 3/4" ADAPTER FOR BRIDGEPORT 5 PC KIT Notes: If you have any problem with the product you purchased, please contact us in time.
Buy It Now
Free Shipping
Condition: New Location: , China
【Bench Drill Mortise Accessories】: Woodworking drill guide is easy to install and remove, you can quickly install or remove it yourself, fast and convenient. 【Wide Application】: Drill jig bracket is perfect for woodworking, ensuring accurate and smooth drilling.
0 bids Free Shipping
Condition: New Location: , China
Adapter bladeCCMT060204 CCMT060208. effective products. If you need more products, you can send us information. Unit TypeUnit. Unit Quantity1p. Toolholder TypeIndexable Turning Toolholder. Shank TypeStraight Shank.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
Precision Dynamic Balanced to G2.5/25000RPM. We appreciate your cooperation for giving us opportunity to show our quality service!
Buy It Now
$8.50 Shipping
Condition: New Location: Huntington Beach, United States
14-20" swing. Efficient "v"groove design securely holds round shank tools as well as square square bits 1/2" - 1". Our part # ALL-47403.
0 bids Free Shipping
Condition: New Location: , United States
4325 CNMG432-PM CNMG120408-PM.
0 bids $5.95 Shipping
Condition: Used Location: Tullahoma, United States
Insert Type: HM90 AP. Cutter is still in good, used condition. EDP: 3101931.
|
|
|
Archer Morse Taper Adaptor Sleeve 5-4 HG Sold as Seen- No Returns No Reserve VAT is included in the price Weighs- 1.010 Kg 2441 Contact Information: Findurstuff Limited Unit 17 Shrub Hill Industrial Estate Cromwell Street Worcester Worcestershire WR4 9EW Office- 01905 26426 Mobile- 07967 201942 E-mail- sales@findurstuff.com Opening Times: We are open Monday to Friday 9am-5pm. However you MUST call before coming over, as there is not always someone on site. Payment and Collection: Payment is expected within 3 days of the auction close. Unless prior arrangements have been made. Payment can be made by Cheque, Paypal, Bank Transfer, Cash on Collection or Credit Card(Please call the office if you wish to make a Credit Crad Payment) You are welcome to collect any item, but at least 24 hours must ... morebe given, as not all goods advertised are on this site. Collection is to be done within 14 days, unless prior arrangements have been made. VAT Invoices: A full VAT invoice is supplied with all purchases. Our VAT number is: GB884 3483 88. If you require any further information or would like to speak to one of us. Please do not hesitate to call or e-mail. If there is no reply, please leave a message and one of us will come back to you shortly. Thank you Verity and James Aston Findurstuff Limited sales@findurstuff.com
|
|
|
YOU ARE LOOKING AT A JACOBS No.500 PORTOMATIC KEYLESS CHUCK. IT IS 1/16" to 1/2" AND IS IN GOOD WORKING CONDITION.
|
|
|
I ship 6 days a week. I offer money back quarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interersted. INTERNATINAL SHIPPING PRICE VARIES. Powered by The free listing tool. List your items fast and easy and manage your active items. On Feb-04-13 at 08:42:32 PST. Seller added the following information:
|
|
YOU ARE BUYING A CLEAN CONDITIONED"AS IS ITEM" AS IN THE PICTURES. THERE'S LITTLE OWNER MARKING ON THE BODY.THIS"HEAVY DUTY TAP HOLDER" IS IN PERFECT OPERATIONAL CONDITION.WE ARE NOT EXPERTS IN ANY PARTICULAR ITEM WE SELL AND WE DO NOT HAVE THE ABILITY OR EXPERTISE TO TEST OUR TOOLS/INSTRUMENTS/EQUIPMENTS FOR FUNCTIONALITY. THIS SELLER MAKES NO GUARANTEES/WARRANTIES AS TO THE ACCURACY. WORKABILITY OF THIS INSTRUMENT. I GOT THIS ITEM FROM THE NAVAL BASE AUCTION IN CALIFORNIA AND ALL I KNEW IS THAT, THEIR TOOLS/EQUIPMENTS ARE IN WORKING AND OPERATIONAL CONDITION. THEY HAVE GOOD MAINTENANCE SYSTEM PROGRAM/RECORDS.DO YOUR HOMEWORK BEFORE YOU BID.WE DELIVER TO: USA& INTERNATIONAL. INTERNATIONAL BUYERS' CHARGES WILL BE BASED ON THE THE COUNTRY RATES PLUS THE CUSTOMS ... moreDUTIES.COMBINED SHIPPING APPLY ON THIS ITEM. THE WEIGHT OF THIS ITEM IS ABOUT 2.3 LBS.OVERALL LENGTH IS ABOUT 6-3/8 INCHES.OUTSIDE DIAMETER OF 1-3/4 INCHES. NO REASONABLE OFFER WILL BE REFUSED. CALIFORNIA CUSTOMERS WILL BE TAX 9.0% BID WITH CONFIDENCE. I LIKE AND ENJOY POSITIVE FEEDBACK. AND I WOULD HIGHLY APPRECIATE IF THE BUYER WILL GIVE THEIR FEEDBACK UPON RECEIVING THE PURCHASED ITEM.IF YOU HAVE PROBLEM/DISPUTE/S WITH THE ITEM YOU PURCHASED, PLEASE EMAIL ME FIRST BEFORE YOU GIVE FEEDBACK, SO WE CAN FIGURE IT OUT OR SETTLE THE MATTER IN A PEACEFUL& REASONABLE SOLUTION. THIS INSTRUMENT IS PROUDLY USE BY: US NAVY. US COASTGUARD, US AIR FORCE, US MARINE, OFFSHORE OIL CO'S, ETC ETC.
|
|
YOU ARE BUYING A CLEAN CONDITONED"AS IS ITEM" AS IN THE PICTURES.WE ARE NOT EXPERTS IN ANY PARTICULAR ITEM WE SELL AND WE DO NOT HAVE THE ABILITY OR EXPERTISE TO TEST OUR TOOLS/INSTRUMENTS/EQUIPMENTS FOR FUNCTIONALITY. THIS SELLER MAKES NO GUARANTEES/WARRANTIES AS TO THE ACCURACY. WORKABILITY OF THIS INSTRUMENT. I GOT THIS ITEM FROM THE NAVAL BASE AUCTION IN CALIFORNIA AND ALL I KNEW IS THAT, THEIR TOOLS/EQUIPMENTS ARE IN WORKING AND OPERATIONAL CONDITION. THEY HAVE GOOD MAINTENANCE SYSTEM PROGRAM/RECORDS.DO YOUR HOMEWORK BEFORE YOU BID.WE DELIVER TO: USA& INTERNATIONAL. INTERNATIONAL BUYERS' CHARGES WILL BE BASED ON THE THE COUNTRY RATES PLUS THE CUSTOMS DUTIES.COMBINED SHIPPING APPLY ON THIS ITEM. THE WEIGHT OF THIS ITEM IS ABOUT 1.7 LBS.OVERALL LENGTH IS ABOUT 6-3/8 INCHES.OUTSIDE ... moreDIAMETER OF 1-3/4 INCHES. NO REASONABLE OFFER WILL BE REFUSED CALIFORNIA CUSTOMERS WILL BE TAX 8.75% BID WITH CONFIDENCE. I LIKE AND ENJOY POSITIVE FEEDBACK. AND I WOULD HIGHLY APPRECIATE IF THE BUYER WILL GIVE THEIR FEEDBACK UPON RECEIVING THE PURCHASED ITEM.IF YOU HAVE PROBLEM/DISPUTE/S WITH THE ITEM YOU PURCHASED, PLEASE EMAIL ME FIRST BEFORE YOU GIVE FEEDBACK, SO WE CAN FIGURE IT OUT OR SETTLE THE MATTER IN A PEACEFUL& REASONABLE SOLUTION.
|
|
|
aims SIX MORSE TAPER EXTENSION/ ADAPTER SLEEVES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 6 Morse Taper Extension/ Adapter Sleeves in good condition. Sizes in Lot: 2) 1 to#2 Morse Taper. 2) 2 to#3 Morse Taper. 2) 3 to#4 Morse Taper. Overall Length Range: 3-3/4" to 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SIX MORSE TAPER EXTENSION/ ADAPTER SLEEVES Reliable Tool Inc. c 2011 | Powered by
|
|
|
aims SIX#2 MORSE TAPER EXTENSION/ ADAPTER SLEEVES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 6 Morse Taper Extension/ Adapter Sleeves in good condition. Sizes in Lot: 3) 2 to#1 Morse Taper. 2) 2 to#2 Morse Taper. 2 to#3 Morse Taper. Overall Length Range: 6" to 9-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SIX#2 MORSE TAPER EXTENSION/ ADAPTER SLEEVES Reliable Tool Inc. c 2011 | Powered by
|
|
LISTING IS FOR A USED MORSE TAPER DRILL SLEEVE BRAN D- INSIDE TAPER- 1MT OUTSIDE TAPER- 2MT CONDITION- GOOD USED A FEW NICKS AND DINGS Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS ... moreWELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8
|
|
aims BROWN& SHARPE 2-3/4" HSS SHELLMILL ARBOR w/ R8 SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a R8 Shank Shellmill Holder in Good condition. Specifications: Shellmill Diameter: 3" Shank: R8. Overall length: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, ... moreplease check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BROWN& SHARPE 2-3/4" HSS SHELLMILL ARBOR w/ R8 SHANK BROWN& SHARPE 2-3/4" HSS SHELLMILL ARBOR w/ R8 SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
DESCRIPTION: 1 MORSE TAPER 10-24 TAP DRIVER COLLIS USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we do have experience in the tooling industry. We don't know everything. If a mistake is ever made on one of our listings, it is purely unintentional and no fraud or misrepresentation is intended. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1 business day. Shipping charges are the responsibility of the buyer unless otherwise stated in the ... moread. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo
|
|
aims MILLING ARBOR W/ 7 THURSTON& OTHER HSS SLITTING SAWS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Thurston& other manufacturers. This is a Slitting Saw Arbor with 7 Saws in good condition. Specifications: Saw Diameters: 2" Arbor Holes: 3/4" Saw Thicknesses: 3/8" Shank: 1" Overall Length: 4-3/4" Comes as shown in pictures. Check out the photos! if you ... morehave any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. MILLING ARBOR W/ 7 THURSTON& OTHER HSS SLITTING SAWS Reliable Tool Inc. c 2011 | Powered by g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ea9de972c-0xfa-
|
|
|
aims PAIR OF NIAGARA HSS MILLING CUTTERS- 6" X 1" X 1-1/4" ARBORS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Niagara These are 2 HSS Milling Cutters in good condition. Specifications: Diameters: 6" Thickness: 1" Arbor Hole Diameters: 1-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF NIAGARA HSS MILLING CUTTERS- 6" X 1" X 1-1/4" ARBORS Reliable Tool Inc. c 2011 | Powered by:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13edd4c9d96-0xf3-
|
|
|
VALENITE/ TM SMITH QUICK CHANGE TAP ADAPTER SIZE#2. HOLDS 3/4" TAP ALSO WORKS WITH BILZ SYSTEM Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
ONE USED SCULLY JONES PART# 04142 No. 4 MORSE TAPER PIPE TAP HOLDER DRIVER 1-1/4" SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: $40.95 All Others: $59.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases ... morein USPS Priority Mail International Rates are reflected in our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
aims SLITTING SAW ARBOR W/ 1" SHANK& 6 THURSTON AND OTHER HSS SLITTING SAWS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Thurston& other manufacturers. This is a Slitting Saw Arbor with 6 Saws in good condition. Specifications: Saw Diameters: 2-1/2" Arbor Holes: 7/8" Saw Thicknesses Range: 032" to.125" Shank: 1" Overall Length: 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SLITTING SAW ARBOR W/ 1" ... moreSHANK& 6 THURSTON AND OTHER HSS SLITTING SAWS Reliable Tool Inc. c 2011 | Powered by
|
|
|
For Sale is 1 Command CT40 V40 C4F4-1000 Stub Mill Arbor Holder Manufacture No: C4F4-1000 Condition: light scuffs from use; overall in great condition; looks New! Buyer pays all shipping; Ohio Sales Tax Rules Apply; Payment must be received within 5 days of close of sale. Sold AS IS.
|
|
|
CARBOLOY NMTB50 SHELL MILL HOLDER# NMTB50-SM200-1000 1" ARBOR 3/8" KEY
|
|
|
SCULLT-JONES Split Sleeve Morse Taper Tap Drivers#4MT.2MT, One Reducing Sleeve Morse# 2-1 S-J 1" 4 MT Tap Driver 352697 Collis 5/8" 3 MT Tap Drive 73422 S-J 3/8" 3 MT Tap Drive 952683
|
|
|
3 MT MORSE TAPER SOLID CENTER. USED OLD STOCK, ITS BEEN STORED AWAY FOR YRS. THE CENTER POINT WILL WORK BUT SHOULD BE REGROUND SOON. CHECK MY OTHER ADS FOR MORE TOOLING& MORE TO BE LISTED. THANKS SALES& SHIPPING TO USA ONLY. PAYMENT DUE IN 24 HRS. I WILL SHIP NEXT DAY. THANK YOU. I WILL ALWAYS COMBINED SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fe6277d61-0x107-
|
|
For Sale: Weldon arbor adapter 1/2" in size Model SH1-5 D680 HS Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder ... moreis deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also be reached by e-mail. I will answer your e-mails or calls as soon as possible. Thank y
|
|
|
aims LOT OF RETENTION KNOBS- 5/8" 13 TPI read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are a lot of Retention Knobs in good condition. Specifications: Head Diameters: 0.580" approx. Neck Diameters: 0.385" approx. Thread Sizes: 5/8" 13 TPI. Overall Lengths: 2-1/4" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF RETENTION KNOBS- 5/8" 13 TPI Reliable Tool Inc. c 2011 | Powered by
|
|
Description Very Good used Ammco Hubless Rotor Clamping Adapter For 4000 Brake Lathe Has reversible Centering Cone The threads measure at 1 3/4" dia. Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller ... morea question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. A
|
|
|
Techniks 04232-5/32 5/32" ER32 Collet. ER32 collet Overall length 40.2mm Overall diameter 33mm ridge 3.5mm wide Used clean and functional tool. No wear to speak of. Just some stains. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
Overarm arbor support off a Brown& Sharpe model 2B horizontal milling machine. Looks to be in good condition.
|
|
|
Morse taper split sleeve adapters(3)Tap Drivers(4)Drill adapters[3c] 5/16 tap driver#1 MT 9/32 tap driver#1 MT 5/32 tap driver#2 MT 3/16 drill driver#1 MT 1/8 drill driver#1 MT 1/4 drill driver#1 MT
|
|
|
BRIDGEPORT RIGHT ANGLE R-8 MILLING ATTACHMENT HORIZONTAL*SUPERB* BRIDGEPORT R-8 HORIZONTAL MILLING ATTACHMENT. EXCELLENT CONDITION AS SHOWN. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
THIS IS A PETERSON TOOL ARBOR WITH A 1 INCH CUTTER LOCATING DIAMETER AND A R8 MACHINE LOCATION CONFIGURATION. THESE ARBORS AR GOOD TO HAVE WHEN A NUT-PROJECTION FROM THE CUTTER WILL INTERFERE WITH MILLING JOB. I sold my R8 Mill and now I am sell residual tooling. Please look at my other items that may be purchased and ship together for a savings. I combine shipping to save you money. If you purchase multiple items please do not pay immediately. But request an invoice so I can adjust the shipping amount for you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-141afd09c14-0xf8-
|
|
CLARKSON AUTOLOCK COLLET S1 IMPERIAL 1/4" 3/8" 1/2" 5/8" One side of Collet nut chipped does not affect performance! No spanner or box The centre locator is good The thread is 1/2”13TPI Made in England. ABOUT ME I take great pride in offering you a vast selection of the top brand name equipment and premium tooling. I’m committed to 5-star service! My goal is to exceed your expectations! If you feel that you have not received 5 star services. Please contact me at msipower@bellnet.ca before leaving feedback and I will work with you to ensure satisfaction. My new and used inventory changes frequently so check back often for new products and amazing finds. I will continue to comb the market to bring you the best. All items are described with honesty to ensure that you receive ... moreexactly what you see on the pictures Bid with Confidence SHIPPING All items are packed with extra-care. However. If you would like to insure your package, please let us know and we will add a few dollars of insurance to the invoice prior to you making payment. PAYMENT Thank you for your business. Please make payment within 7 days. CONTACT If you have any questions or concerns. Please feel free to send me a note via the eBay system Please contact me for the shipping charges
|
|
Offered for our consideration is a Janesville Arbor Press. ILP500, being offered USED. This item is in good condition with very minimal wear. There is some surface rust on the wheel of the arm, as shown in the pictures, and the press includes a nice gripper on the handle. The press is about 3" wide, 5.5" deep and stands just under 14" tall with the handle in the upright position. This item weighs just over 13 lbs and has a 4.5" throat. If you have any questions. Please feel free to email them to me and I will do my best to answer them. If you are bidding from outside the USA, please wait for an invoice as shipping charges will be different then what is offered in this listing. As always, thanks for viewing my auctions and good luck bidding! RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14207a4ae07-0xfc-
|
|
|
WE ARE SELLING A SNAP ON/ BLUEPOINT YA6890 WIRELESS CHASSISEAR KIT THAT IS IN GOOD WORKING CONDITION.
|
|
|
WE ARE SELLING A SET OF 14 SNAP ON MODIS. SOLUS, ETHOS, MT2500 OBDII KEYS AND ADAPTER. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1431802102d-0xf2-
|
|
Lot 3952 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3952) Used Machinist Collis No.5 MT To 2 Inch Straight Shank Sleeve You are bidding on a used. But in good shape, No.5 Morse Taper Shank to 2 inch straight shank sleeve. Manufactured by Collis Precision Products in the USA. Its features are: Marked Collis 62757* M7* 7 inches in overall length I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt 2-1/2 LBS. Thank You for Looking!
|
|
|
Used Jacobs adapterI don't need itPlease see pictures. That is the item you will get:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1431a7c4bfa-0xe5-
|
|
|
up for bid is a MORSE TAPER EXTENSION ADAPTER SLEEVE and 3 Jacobs Drill Chucks All made in USA! L@K yes i will combine shipping with my other morse taper drill bit lots and mixed drill bit lots well anything for that matter as long as i have room to reinforce the box so i can ship it with no problems yes i wil combine shipping! There is no chuck keys.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1431a7c4c37-0xfd-
|
|
Description Good used Supreme Chuck Model No. 3T2 0-3/8" Capacity 2 Taper on CNC Helical Gear Draw Chuck mmsa orient Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is ... moreonly offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sales outside of the USA are&q
|
|
|
Very Nice- Original Jacobs MT2/Morse taper#2 drill chuck arbor with JT33/ Jacobs Taper 33 mount. Stamped JACOBS CHUCK ARBOR NO. 2 MORSE TAPER WITH NO. 33 JACOBS TAPER. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
COLLIS MORSE TAPER ADAPTER NO.2 MORSE TAPER SHANK. NO.3 MORSE INTERNAL TAPER. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
Adapter WELCOME, MT5 to MT4 Adapter Super Nice Condition! FREE SHIPPING! SATISFACTION GUARANTEED! Review my feedback score! Shop with confidence! Terms& Conditions For eBay auctions. OUR GUARANTEE. We stand behind our products and guarantee the full functional capabilities of all our items. Customers are our top priority! Please contact us though ebay with any questions and/or issue. SHIPPING. All orders will be shipped within 24 hours of receiving payment. Optional shipping methods are available for faster deliver just contact us before making payment. Most times if we offering a flat rate shipping cost we will just charge the difference for faster service. RETURN POLICY. We offer 14 day returns if the item is not as described. Contact us and we will provide you with return instructions ... moreand a label to send the item back. FEEDBACK. We appreciate your business and take pride in our feedback so please contact us if you have any concerns before leaving Negative feedback. Please read the description carefully to fully understand the included items and conditions. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1431db5f513-0x101-
|
|
|
A Cleveland Twist Drill Co. 2 to 2 MT2 to MT2 Extension adapter Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show the items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
517-420-5401 SKU: SMT3185 40 TAPER TO 30 TAPER ADAPTER(H-126) Condition: Used I offer money back guarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interested. INTERNATIONAL SHIPPING PRICE VARIES. I ship my products out 6 days per week. Priority mail is my preferred method. If you need something second day air. Don't hesitate to call. Please call on international shipping. I strive to make every transaction a pleasant experience. I will refund or replace any item you are not satisfied with.
|
|
|
YOU ARE BIDDING ON ONE USED EXTENSION SLEEVE MORSE TAPER#2 X#2 9-1/8" OAL USA EXCELLANT DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
This Sale is for a 3 Ton Arbor Press. Press weighs@ 160 Lbs Construction: Heavy Duty Cast Iron Base size: 8” x 18” Height over Table: 12-1/2” Type: Single Leverage Maximum Pressure: 3 Ton Includes only what you see. Free local pick-up offered(by appointment) SOLD WITH A 14 DAY RIGHT OF INSPECTION! Ships via truck on a skid(pallet) to Commercial destination with a Dock or forklift. Lift-gate service is available at additional cost. Inquire Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard ... moreTime. U.S. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to
|
|
|
Shop made adapter. Holds 1" die and has square end for being held in a tap handle. Posted with
|
|
Welcome to our Auction! gp Malco TS1 Turbo Shear Sheet Metal Drill Attachment used shows some wear from use. All Payments are expected to be made withing a reasonable period of time. Usually up to 3 days after the auction end. Please bid only if you intend to buy. INTERNATIONAL SHIPPING: NO EXCEPTION: EXPRESS MAIL ONLY(EMS) NO FIRST CLASS INTERNATIONAL, PLEASE DON'T EMAIL ME BEFORE OR AFTER THE AUCTION TO SAY THAT IT'S TOO EXPENSIVE! PLEASE CONTACT US FIRST TO SEE IF WE WILL SHIP TO YOUR COUNTRY AND FOR A SHIPPING QUOTE MOST PACKAGES GO OUT WITHIN ONE OR TWO BUSINESS DAYS AFTER PAYMENT HAS BEEN RECEIVED ALL SALES ARE 100% AS-IS AND FINAL- I DO NOT TAKE RETURNS. PLEASE DO NOT BID IF YOU DON'T INTEND TO BUY. I WILL NOT BE RESPONSIBLE FOR LOST OR DAMAGED ITEMS. I WILL COMBINE ITEMS ... moreFOR SHIPMENT, PLEASE EMAIL FOR QUOTES SHIPPING INSURANCE OUTSIDE THE US IS NOT AVAILABLE AND AND I WILL NOT BE RESPONSIBLE FOR LOST OR DAMAGED ITEMS WE TRY TO DESCRIBE EVERYTHING THE BEST WE COULD. WE ARE NOT EXPERTS, PLEASE FEEL FREE TO INSTRUCT US OF HOW TO TEST SOMETHING OR WHAT EXTRA PICTURES YOU NEED AND WE WILL BE MORE THAN HAPPY TO DO THAT FOR YOU. NEED MORE PICS OR HAVE SOME QUESTIONS? JUST CONTACT US! Posted with
|
|
No.10 Valenite TM Smith Bilz Size#1 Tap Adapter For 3/16" Tap This Listing is for(1) Valenite TM Smith Bilz Tap Adapter USED. ShelfD3 Bin508 121377ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped ... moreto an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As al
|
|
No.6 Valenite TM Smith Bilz Size#1 Tap Adapter For 9/64" Tap This Listing is for(1) Valenite TM Smith Bilz Tap Adapter USED. ShelfD3 Bin508 121377ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped ... moreto an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As alw
|
|
|
JET Equipment& Tools AP-D 1/2 Ton Arbor Press*We Ship WorldWide* FedEx. UPS, USPS, DHL– PrePay& Add or on Your Account* Purchases Include a 14 Day Money Back Guarantee* BestTestUS Sells all Types of Hard to Find Parts and Accessories That We Have Acquired Over the Past 25 Years! BestTestUS is a Part of Tech-Systems Electronics. Inc. Est. 1989) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1431dbea66c-0xd4-
|
|
|
Vintage Chicago Latrobe No. 1 inside- No. 2 outside adapter.Nice clean tool. Morse 17/32" HSS twist drill with#1 taper. And a National 1/2" HSS twist drill with a#2 taper. Any questions please email. International shipping through Global Shipping Program. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1431dbea789-0xf7-
|
|
3/8" Valenite TM Smith Bilz Size#1 Tap Adapter This Listing is for(1) Valenite TM Smith Bilz Tap Adapter USED. ShelfD3 Bin508 121377ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana ... moreaddress. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As always. If you ev
|
|
5/16" Valenite TM Smith Bilz Size#1 Tap Adapter This Listing is for(1) Valenite TM Smith Bilz Tap Adapter USED. ShelfD3 Bin508 121377ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana ... moreaddress. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As always. If you e
|
|
7/16" Valenite TM Smith Bilz Size#1 Tap Adapter This Listing is for(1) Valenite TM Smith Bilz Tap Adapter USED. ShelfD3 Bin508 121377ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana ... moreaddress. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As always. If you e
|
|
9/16" Valenite TM Smith Bilz Size#1 Tap Adapter 51-009 This Listing is for(1) Valenite TM Smith Bilz Tap Adapter USED. ShelfD3 Bin508 121377ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an ... moreIndiana address. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As always. I
|
|
Valenite TM Smith Bilz 312-52-720 Tap Adapter Tool Holder 1-1/4" x 3-3/4" Shank This Listing is for(1) Valenite TM Smith Bilz Tap Adapter Tool Holder USED. ShelfD3 Bin508 1213462ZK/JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with ... morelocal pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer and your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of l
|
|
Inventory Number: 05131660378 Manufacturer: Description: LATHE 3/8" TOOL HOLDER. R8 SHANK Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, UNKNOWN MANUFRACTURE. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not
|
|
I have for Auction: ONE. MILLING MACHINE ARBOR, With it's nut& a Slitting Saw. This unit is in VERY GOOD overall Condition. It has some surface blemishes on it but, they are minor, and I believe they could be buffed off, if you wanted to. NO Rust, NO Cracks, NO Teeth broken or damaged. Rear threads are all good. Nut is on tight& I did not try to remove it. This tool is from my late neighbor's estate: He had a very large milling machine& lots of tooling. This arbor, just as photographed, was in a wall cabinet, behind the machine. It was wrapped in, oil paper. This is what I found out about it on the internet: Slitting Saw, for general purpose slotting and cut-off operations. These are it's sizes: Dia. of arbor 1" with nut it's 1-1/2" Length from tool bit ... moreto nut end is: 1-5/8" Total length of tool: 7-3/4" Rear threads are good. Nut seems to be right hand. Bit has 30 teeth. It has written on it: 3" X 3/32" X 1" High Speed. This arbor is certainly, OLD SCHOOL" And I am sure it was made in America. There was a 2004 catalog, in the same wall cabinet, that is from: Industrial Pipe& Steel Co. of So. EL Monte, Calif. So, I assume a lot of his tooling came from there. Tool Looks Great, I chucked it up in the milling machine& it runs straight and true. I did not try to cut anything but, I would guarantee it. It fits into a, PRIORITY MAIL" MEDIUM, Flat Rate Box. So, I will send it to you that way. Post Office says, It will get to you 3 working days, after I send it. It will have Insurance& a Tracking Number. And I will pack it carefully. IT IS VERY SHARP! SHIPPING IS FREE" On this item. This is a NO Reserve Auction. Thanks. Bob. I ship in the U.S.A. Only. Paypal only, Please. I ship 1 Business day after receiving payment. Please, Pay within 3 days of Auctions end. If you have questions, Please, ask before bidding ends. THANK-YOU FOR LOOKING* GOOD LUCK BIDDING* AND MAY GOD BLESS*
|
|
|
lot of 2 MT3 TO MT5 Socket Adapters"OD" is MT5 and the"ID" is MT3- old and used in good shape- came out of a machine shop that closed there doors
|
|
Inventory Number: 12130400033 Manufacturer: Description: 10 MIXED TAPS WITH TAP ADAPTERS. SMITH 52-2160, TMS 52-2120, 52-208 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. ... moreWe do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issue
|
|
Inventory Number: 12130400031 Manufacturer: Description: 16 MIXED SMITH TOOL TAP ADAPTERS. TMS-52-206, 204, 208,1/8"3/8"5/16"1/ Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to ... morehave it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items,
|
|
Inventory Number: 12130400030 Manufacturer: Description: 15 MIXED SMITH TOOL TAP ADAPTERS. 52-204-0, 202-0, 206-0,1/8"1/4"3/4,3/ Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have ... moreit removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refu
|
|
|
MEAD SE-28 PRESS PSI 250 MEDIA: AIR IF YOU WOULD LIKE A SHIPPING QUOTE PLEASE EMAIL US. TOTAL SHIPPING WEIGHT 350 LB BUYER IS RESPONSIBLE FOR ALL SHIPPING/HANDLING CHARGES
|
|
Inventory Number: 12130400019 Manufacturer: Description: 3 LYNDEX B3003-0002 JT2 ARBORS. ADAPTERS, BT30 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 3. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer excha
|
|
|
New this investment was over $10.000 and this auction includes all of these items listed(includes the stand shown in pictures) Part# Description B3010.002 4 kN HKPL Manual Pneumatic aided press with Fine Adjustment PFE& Maintenance Unit Press Force: 4 kN at 7 bar air pressure Works fine. All set to use. If you have questions or will need help to arrange shipmnet. We can quote wooden box/ skidding/ packaging arrange to get the unit to our shipping dept to be picked up by your shipping comapny. Thanks for looking. Bill 814-372-1340
|
|
|
Used C6 to C5 Capto adaptor extension. Model is Sandvik C6-391.02-50 110 reduction adaptor. Minimal cosmetic cosmetic blemishes on the exterior. Interior is excellent. Good usable condition. See image for catalog specifications. Item no.12.
|
|
|
ARBORS WILL HOLD BITS AND TAPS FROM 1/16 TO 1/2 INCH.
|
|
|
Vintage FAMCO Model A Arbor Press. Made in USA by the FAMCO MACHINE COMPANY. Works smoothly. Weighs a bit over 17 pounds. measures approx 10" tall. 9" deep, and 3.5" wide Pictures show arbor in full up and full down position. Has some surface rust and age appropriate wear. Overall good used condition. Please use pictures to evaluate.
|
|
|
aims U.S.A! JACOBS TAPER#3 ARBOR W/ BT40 SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Jacobs Taper Arbor in good condition. Comes equipped with a retention knob. Specifications: Size: Jacobs Taper#3. Shank: BT40. Projection: 3" Overall Length: 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! JACOBS TAPER#3 ARBOR W/ BT40 SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
aims 2 COLLIS MORSE TAPER ADAPTERS 3MT-3MT& 2MT-3MT read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Collis& other manufacturers. These are 4 Morse Taper Sleeve Adapters in very good condition. Specifications: Sizes#2 Morse Taper to#3 Morse Taper#3 Morse Taper to#3 Morse Taper Overall Lengths: 7-13/16" 8-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 COLLIS MORSE TAPER ADAPTERS 3MT-3MT& 2MT-3MT Reliable Tool Inc. c 2011 | Powered by
|
|
|
Cincinnati/ Kearney Trecker Style Milling Arbors Lot and Drawbar. 1" Milling arbor. 16 inches in length with end nut. MT#50 1 1/4" Milling arbor with some spacers. 16 inches in length. MT#50. 1 Complete drawbar for arbors with breaker nut at rear. 1 Newer 1" spacer in box. 2 inches in length. 1 Shell Mill Holder with#40 MT(will need end nut) 1 Shell Mill Holder with#40 MT(will need keys and end retention nut. Items will be sent Parcel Post due to weight and size of containment packaging. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14368346f85-0x107-
|
|
|
Industrial Engineering tool holder#s: CAT45.750” Diameter Endmill holder Universal Engineering 463613;CAT45.750” Diameter Endmill holder Universal Engineering 463613;CAT45 1.000” Diameter Endmill holder Universal Engineering 465387;CAT45 1.250” Diameter Endmill holder Universal Engineering 465388;CAT45 Universal Enginering collet holders 91954;CAT45.750” Diameter arbor Universal Engineering 463618;CAT45 1.000” Diameter arbor Universal Engineering 463619; CAT45 1.250” Diameter arbor 65723 Bendix S-J
|
|
|
Ebay Base This auction is for 2 Jacobs Chuck arbors made in USA. These are part №. A4006 with a № 6(JT6) taper to 1/2" straight shank. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
This manual arbor press will ensure you an accurate and automatic alignment. Perfect for shearing. Shaping, and punching of light-gauge stock, metal, or plastic. Condition: Tool shows minor scratches and residue from previous use and storage. Overall in good condition. Dimensions: Width 4 in. Height 12 in, Depth 8 in Weight: 13.2 lbs We're sorry but at this time we do not offer combined shipping. Many of our items ship from different locations. Picture(s) shown are of actual item. Unless stated in the description. No additional accessories are included. If you have questions, please ask PRIOR to committing to the purchase of the item. Click on image to view larger version Click on image to view larger version Click on image to view larger version Click on image to view larger version Click ... moreon image to view larger version Click on image to view larger version Click on image to view larger version Click on image to view larger version UCID:299171.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14383c11f9a-0xfb-
|
|
|
BOYAR SHULTZ FLOATING REAMER HOLDER ADAPTER 3/4 SHANKS 1/2 ID WE OFFER COMBINED SHIPPING PLEASE WAIT FOR INVOICE INVENTORY#52909
|
|
|
aims STRAIGHT SHANK 1" SLITTING SAW ARBOR WITH 3 HSS SAWS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Slitting Saw Arbor with HSS Saws in good condition. Specifications: Saw Diameters: 2-3/4" Arbor Size: 1" Shank: 1/2" Diameter. Overall Length: 4-3/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. STRAIGHT SHANK 1" SLITTING SAW ARBOR WITH 3 HSS SAWS Reliable Tool Inc. c 2011 | Powered by
|
|
Lot of 5 End Mill Holders w/ R8 Shanks Lot Includes: 5/8" 3/4" 7/8" Condition as Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- ... moredo NOT pay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds.
|
|
Assorted Lot of 6 End Mill Holders& Tooling w/ R8 Shanks Lot Includes: 3/16" 3/8" 1/2" 5/8" 3/4" Includes Bolt on R8 Holder Condition as Pictured No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To ... morereceive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds.
|
|
|
Sandvik Coromant Capto L-14546 Adapter for Round Shank Tools 1 1/2 inch. It shows some signs of use. But appears to be in good overall condition and ready to go to work. This and other tooling I'll be listing came out of an industrial cleanout and I'll admit to not knowing a great deal about it, but will try and answer any questions. I've included all the numbers on the piece. Shipping will be $9.00 in a USPS medium flat rate priority mail box.
|
|
|
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Up for bids is this Schaublin number 4 to number 1 Morse Taper adapter with a number 1 Morse taper dead center. The adapter is marked with the Shaublin logo and also Mo4/Mo1. I believe the small center is original Schaublin equipment also. The small center looks to be altered from its original shape. This may be handy to have for an SV 12 milling machine. Please be sure to check out my other Schaublin Lathe auctions. INTERNATIONAL BIDDERS PLEASE CONTACT ME FOR A SHIPPING QUOTE. THE EBAY SHIPPING CALCULATOR IS NOT ACCURATE. INTERNATIONAL BIDDERS ALSO PAY A $25.00 HANDLING CHARGE. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143878ec247-0xe5-
|
|
I have for Auction: ONE. COMPLETE" Milling Machine Arbor, with all of it's solid spacers, with keyways) 14 in all. And it's Arbor Nut- Left Hand. Plus, it's, Original" Box: Arbor has written on it: HS-30-7/8-A-10-2. On it& on Box. This Arbor was found in a wooden wall cabinet, behind the Milling Machine, in my late neighbors Garage. He had his own machine shop, until the mid 1980's. When he retired, he brought his lathe, milling machine and other equipment to his home. This Arbor was made before the mid 1980's and I am sure it was made in America because, everything the man had was made in the U.S.A. With names like, Brown& Sharp, Bridgeport& Hardinge, on it. This unit was NOT made in Japan or Taiwan or China! I can not prove it but, I am sure, this, ... moreOLD SCHOOL, Arbor, was crafted in America. The condition of the entire unit is: Better Than New! As far as I can see. NO RUST, NO PITS, Much of NO Blemishes, a few tiny surface blemishes, only. Everything fits together easily& all threads are good. Everything about this Arbor is Nice! NO Issues. I do not think it has ever been used. I think the reason it is so new& shiny is: The unit was completely covered in, cosmolene? Like the Military covers things, for long storage. Then it was wrapped in an, Oil Paper? Oil paper comes with it& so does original box. It's an old time, blue box, like a Smith& Wesson pistol comes in. I cleaned all of the hard grease off of the Arbor& found it to be like new& in unused looking condition! Please, see Photo's. Want a better deal? How about, FREE SHIPPING" NOT Economy, you have to wait& wait for but, PRIORITY MAIL" LARGE' Flat Rate Box. With Insurance& a Tracking Number Included. Arbor& it's box, will be carefully Bubble Wrapped. This Arbor will fit a lot of different Milling Machines: STYLE A. ARBOR IS: 16-1/4" long. Taper 30. Arbor Dia. 7/8" Dia. of Spacers = 1-3/8" O.D. width 1/4" Quantity = 13. Dia. of Spacer
|
|
|
Welcome! Up for sale is a Universal Engineering Y Collet Chuck Mill Tool Holder 1" Straight Shank. Used in good condition. Feel free to email any que stions! SCT2768
|
|
|
This auction is for a used Scully Jones. BROWN& SHARPE#7 to MORSE TAPER#3 adapter in very good condition.
|
|
|
FOR SALE ARE 4 SEAT CUTTERS. THE CENTER BORE IS.625 THE OD'S ARE 1.400. 1.600. 1.800, 2.000. THERE IS NO NAME OR PART# ON THEM. ITEM IS SOLD AS-IS; U.S. SALES ONLY. BUYER IS TO PAY SHIPPING FEES. FEEL FREE TO ASK QUESTIONS. THANKS
|
|
|
This listing is for one Shank Shell Mill Arbor R8 with 1" Pilot Diameter. This piece is lightly used. Please see my other listings for more screw machine shop items.
|
|
|
aims JACOBS#3 TAPER ADAPTER w/ BT40 SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Jacobs Taper Adapter with BT40 Shank in good condition. Model# JBT-40-J3. Specifications: Shank: BT40. Holding Size: Jacobs#3 Taper. Projection: 2-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JACOBS#3 TAPER ADAPTER w/ BT40 SHANK Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143951f04e6-0xfa-
|
|
|
SIERRA AMERICAN SA-1000 Slitting/Slotting Saw Machine Tool Arbor used in great condition see pictures for more detail thank-you for bidding
|
|
|
FOR SALE IS A.375 BALL HEAD TOOL HOLDER BODY. THERE IS NO NAME OR PART# ON IT. FOR.375 PILOT TOP. ITEM IS SOLD AS-IS; U.S. SALES ONLY. BUYER IS TO PAY SHIPPING FEES. FEEL FREE TO ASK QUESTIONS. THANKS
|
|
|
EMUGE BILZ QUICK CHANGE TAP ADAPTER SIZE#2 TORQUE CONTROL TYPE. SIZE: 1-1/8" Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
Up for auction are two Morse taper sleeves a 2 to 4 and a 2 to 3 also a 4 to a taper that might be a Jarno. Size of the taper is 1.400 long.698 on large end and.630 on small end. Also a guide for tap following/centering. NO RESERVE!
|
|
aims UNIVERSAL KWIK SWITCH 300 SHELLMILL ARBOR- 80437 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Universal Engineering Co. Kwik Switch Shellmill Arbor in good condition. Model#s: 80437 Features: The Kwik-Switch is supplied as alternative tooling in Bridgeport and other machines. The 300 series which has more mass and a more positive lock. Specifications: Shanks: Kwik-Switch 300. Spud/ Arbor Size: 1-1/2" Projections: 2-1/8" Overall Lengths: 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! ... moreBidding starts at a dollar with no reserve. UNIVERSAL KWIK SWITCH 300 SHELLMILL ARBOR- 80437 Reliable Tool Inc. c 2011 | Powered by
|
|
|
length from base to taper 1.89" base diameter 1.125" top diameter 1.625" bottom thread 7/16-14, four 0.25" slots in the base, Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
A very nice. USA made, COLLIS 60645 extension socket/adapter; 5MT outside, 4MT inside; approx 11-3/4" long; black oxide. A few dings on the tang, small handling scratches, overall really excellent condition. Questions welcomed, thanks for looking.
|
|
|
A nice USA MADE. COLLIS brand BROWN& SHARPE#9 taper to#10 adapter; 1/2-13 drawbar thread; approx. 6-3/4" long; very good used condition. Questions welcomed, thanks for looking.
|
|
aims NEW! IRWIN 373100BX 1" 373112BX 1-1/2" BI-METAL HOLE SAWS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a lot of NEW Hole Saws. Specifications: Bi-Metal Construction- for toughness and long lifeElectron Beam Weld- for stronger. Longer lasting teeth4/6 Variable Pitch Teeth- for reduced noise and improved performanceVariable Depth Gullets- provides more efficient chip clearanceWill cut holes in aluminum, copper, iron, stainless steel and zinc.Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding ... morestarts at a dollar with no reserve. NEW! IRWIN 373100BX 1" 373112BX 1-1/2" BI-METAL HOLE SAWS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Morse Taper Adapter Sleeve 2 MT with Flat to 5 MT Shank USA Check the photo the socket is MT 2 with a flat. This item is in good used condition and fully functional. Will ship by USPS Priority Mail Small Flat Rate Box and cost $5.80. Powered by SixBit's eCommerce Solution
|
|
4 ea. Morse Taper Adaptors: 4-5MT. 3-4 MT, 2-3 MT& 2-4 MT plus 2 Drifts, Click to View Image Album Click to View Image Album Used Morse taper adaptors: 4-5. 3-4, 2-3, 2-4MT. Plus two different sized drifts for removing the adaptors. There is no such thing as a Morris taper. They are Morse Tapers. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If ... morewe ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the shipping column. We do combine purchases when
|
|
|
small arbor type press with a die used for some computer circuit board work.
|
|
|
aims MORSE TAPER EXTENSION ADAPTER SLEEVES#2-3 TO#4-5 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are Morse Taper Extension Sleeves in good condition. Specifications: Size Range: 2-3 TO#4-5. OAL Range: 4-1/2" to 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. MORSE TAPER EXTENSION ADAPTER SLEEVES#2-3 TO#4-5 Reliable Tool Inc. c 2011 | Powered by
|
|
|
aims ASSORTED PRECISION MILLING ARBORS& TOOL HOLDERS W/ R8 SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are Assorted Precision Milling Arbors in Good condition. Specifications: Arbor Sizes: 1" 1-1/4" Shank: R8. Overall Lengths: 5-1/2" 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTED PRECISION MILLING ARBORS& TOOL HOLDERS W/ R8 SHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
aims 3/4"16 TPI THREADED ARBOR w/ 2 MORSE TAPER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This ia Threaded Arbor w/ 2MT Shank in good condition. Specifications: Thread: 3/4"16 tpi. Shank: 2MT. Overall Length: 3-7/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3/4"16 TPI THREADED ARBOR w/ 2 MORSE TAPER Reliable Tool Inc. c 2011 | Powered by
|
|
|
THIS AUCTION IS FOR A STARRETT A PIN VICE.3 IN.LONG NO OWNERS MARKINGS. IN GOOD CONDITION. THIS ITEM WILLBE SENT FROM ARIZONA. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-143bb0eb7d3-0xdc-
|
|
|
Up for bud is a USED SCULLY JONES CHICAGO SOLID MORSE TAPER SOCKET. I am not sure the part number but it measures 4 3/8" as seen in the pictures. Posted with
|
|
|