In 
Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
90.25
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Black Material: Steel Style: Modern Gross Weight: 5.6kg/12lbs Package Size: 39*26*15cm/15*10*5inch Box Size: 37.5*25.5*14.5cm/14.76*10.04*5.71inch Package Included 1 Set* Engine Timing Belt Tools.
$
36.75
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Used as lanterns in the oil field so they could see to work by the engines at night. Cast aluminum body painted black with brass trim. Burn kerosene or tiki torch fuel.
$
50.82
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
17.97
Buy It Now
$9.97 Shipping
Condition: New – Open box
Location: Monticello, United States
NEW TAKE OFF 212cc PREDATOR AIR CLEANER. new taken off of a new engine. never ran after leaving the factory.valve cover not included picture for illustration only.
$
12.50
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
The woven cotton jacket is lacquered and covers the thermal plastic insulation. It is orange in color with red and black tracers. This is a high quality wire at a very economical price.
$
18.09
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A nice looking solid brass with T handle drain cock.
$
65.00
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
V belt pulley to make an ice cream machine with a hit and miss enigne.
$
29.99
0 bids
Free Shipping
Condition: Used
Location: Orient, United States
NEW STYLE Webster Magneto Igniter Bracket for. Mag mounts with two holes that are 1 7/16" apart on center. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. Mounts to engine with two holes 1 3/4" apart on center.
$
20.32
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Includes 5.
$
32.50
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This is a very nice reproduction part, laser cut and professionally welded for an exact fit. Will fit on both the single and twin cylinder engines. Also makes your engine nice and quiet so you can talk while near it.
$
499.95
0 bids
Free Shipping
Condition: Used
Location: Holgate, United States
Here is a pretty nice 3/4" Pickering vertical flyball governor. It will work on gas engines and steam engines. It turns over and spins fine. The valve in the bottom appears to be complete and in good shape.
$
349.99
0 bids
Free Shipping
Condition: Used
Location: Orient, United States
KW Ignition Co. MODEL T 2-cylinder High Tension Magneto. Bench tested and throws a nice spark. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. This mag is commonly used on 10-20 IHC Titan tractors.
$
12.85
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
It is a compilation of several old publications all put into one booklet. Has info on fuel systems, timing, maintenance and troubleshooting. A very good source for info and help! You can also learn a lot just from reading through it.
$
90.25
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Black Material: Steel Style: Modern Gross Weight: 5.6kg/12lbs Package Size: 39*26*15cm/15*10*5inch Box Size: 37.5*25.5*14.5cm/14.76*10.04*5.71inch Package Included 1 Set* Engine Timing Belt Tools.
$
90.25
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Black Material: Steel Style: Modern Gross Weight: 5.6kg/12lbs Package Size: 39*26*15cm/15*10*5inch Box Size: 37.5*25.5*14.5cm/14.76*10.04*5.71inch Package Included 1 Set* Engine Timing Belt Tools.
$
90.25
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Black Material: Steel Style: Modern Gross Weight: 5.6kg/12lbs Package Size: 39*26*15cm/15*10*5inch Box Size: 37.5*25.5*14.5cm/14.76*10.04*5.71inch Package Included 1 Set* Engine Timing Belt Tools.
$
16.14
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
77.99
0 bids
$12.00 Shipping
Condition: Used
Location: Baldwin, United States
This Has Been On My shelf For MANY Years & I Have decided to Let It Go ! This Is In Really Good Condition with A Nice Paper Label !
$
7.76
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
These high quality decals are self adhesive. If you are not sure if you like our decals give us a call and we'll give you a free sample! Decals are sold as a pair.
$
64.99
0 bids
Free Shipping
Condition: Used
Location: Orient, United States
1 1/2hp - 2 1/2hp IHC LA / LBHit Miss Gas Engine. Stamped Steel Fuel Tank for. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. The bottom of the tank has repairs - see photos.
$
69.90
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This is a nice reproduction of the cover band for the Wico EK Magneto Cover Band Set. A high quality made in the USA part.
$
22.73
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This works great for sealing water, oil and gasoline. It cuts easily with a knife or scissors.
$
35.95
0 bids
$7.00 Shipping
Condition: Used
Location: Waldo, United States
This is an original push rod holder or clamp for a small Nelson Brothers hit and miss gas engine. It is part number P-127 and is in excellent condition with no cracks, breaks, or repairs. It is from a 1 1/2 or 2hp engine.
$
19.05
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A great tool to remove your stuck piston from the jug. Bolt the plate onto the exhaust port and screw the fitting into the spark plug hole.
$
36.73
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Made in the USA!
$
125.00
0 bids
$10.00 Shipping
Condition: Used
Location: Pine River, United States
Here is a nice starter set of wrenches. They are in various conditions. See pictures. Buy them all for your collection or sell the ones you don’t want to keep. Please ask any questions if you have any. Shipping is a flat $10. Thanks for looking.
$
15.02
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A nice looking solid brass with T handle drain cock.
$
70.00
0 bids
$12.00 Shipping
Condition: New – Open box
Location: Marine City, United States
Nice glass oilers one is round and the other has a flat back, Please look at pictures
$
90.25
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Black Material: Steel Style: Modern Gross Weight: 5.6kg/12lbs Package Size: 39*26*15cm/15*10*5inch Box Size: 37.5*25.5*14.5cm/14.76*10.04*5.71inch Package Included 1 Set* Engine Timing Belt Tools.
$
17.99
Buy It Now
$4.85 Shipping
Condition: New
Location: Nashville, United States
$
90.25
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Black Material: Steel Style: Modern Gross Weight: 5.6kg/12lbs Package Size: 39*26*15cm/15*10*5inch Box Size: 37.5*25.5*14.5cm/14.76*10.04*5.71inch Package Included 1 Set* Engine Timing Belt Tools.
$
10.84
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Many applications from antique to modern.
$
12.25
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
35.00
Buy It Now
$3.95 Shipping
Condition: Used
Location: San Francisco, United States
This Lunkenheimer No. 1 Fig. 1300 Sentinel brass & glass oiler is from a Hit & Miss engine. The oiler is made of high-quality brass, ensuring long-lasting durability. It is a model that is popular among collectors and enthusiasts alike.I have no way to test this oiler so I can’t comment on if it works. Note, it comes with an extra fitting that is screwed into the bottom.
$
8.79
Buy It Now
$4.00 Shipping
Condition: Used
Location: Diamond Point, United States
Greenfield Village. “They Bring ‘Em Back to Life!”. Info on the club and photos of 2 cylinder steam engine. & Plans from a Bygone Era. make Supersized seem small. Get images that. We do not photocopy these.
$
11.25
Buy It Now
$4.25 Shipping
Condition: New
Location: Fayetteville, United States
For sale is #392 the Root & VanDerVoort 1HP and larger horizontal hit Miss Engine Instruction Manual. Full 8 1/2"x 11". Reprint of all the required informantion to care for and operate the engine 1HP and larger.
$
125.00
Buy It Now
Free Shipping
Condition: Used
Location: Bramwell, United States
I don't know much about this one. Looks and runs pretty good. Gas tank has dings on one end. Gas and oil will be drained. See photos for details.
$
18.16
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This is a 7/8 threaded spark plug that is used on a lot of old hit and miss engines and various other applications. This is a very nice high quality spark plug at a very reasonable price.
$
18.00
0 bids
Free Shipping
Condition: Used
Location: Garner, United States
Please enlarge and view all photos and ask any questions. We ship fast, please view shipping options and choose the one the best works for you.
$
59.99
0 bids
Free Shipping
Condition: Used
Location: Reading, United States
$
19.99
Buy It Now
$10.60 Shipping
Condition: Used
Location: Omaha, United States
For sale is a used Oil Bath Air Cleaner. It has a small repair on the bottom. (see pictures).
$
65.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Lincoln, United States
These draw a crowd and conversation. 4 foot of flex hose and a flange and gasket to bolt to your engine. 7" wide 15" lg. and 10" high. Cannon is made from PVC pipe and wood GIVE YOURSELF A PRESENT.
$
13.25
Buy It Now
$4.25 Shipping
Condition: New
Location: Fayetteville, United States
I have a beautiful reprint of the A O Smith Motor Wheel Gas Engine Instruction and Care Manual. face stapled. This manual has all the information to take care and run a smith motor wheel. 6 drawings in the manual, with the center pages being a great detailed drawing of the assembly.
$
12.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Duluth, United States
Selling the coil cap with holder from my single cylinder Maytag engine, in good shape, any questions just ask
$
20.51
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Mounts to the bottom of the Briggs WM or WMB engine to lift the engine up so the flywheel shroud clears when mounting to a flat surface.
$
24.00
0 bids
Free Shipping
Condition: New
Location: Holtwood, United States
1.5" wide by .125" thick- 10' long . You are buying a 10' piece. Please see attached pictures for better description of what it looks like. Belt laces not included! Ten feet of belting only. Thank you.
$
12.00
Buy It Now
$4.24 Shipping
Condition: New
Location: Fayetteville, United States
I have a nice reprint of the Field Brundage Type W Gas Engine and parts Manual. This manual covers the 1 1/2hp to 15hp engines. really covers all the bases. setting up the engine, oiler operation, starting, caring for the engine and even timing of the engines thru 15hp.
$
8.79
Buy It Now
Free Shipping
Condition: New – Open box
Location: Bangor, United States
Part Number 393403. Genuine Briggs & Stratton Part. With Box in poor condition. May need cleaning from shelf wear.
$
74.24
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
These are super nice greasers for stationary or movable bearings. It provides continuous pressure on the lubricant which forces the grease down on the bearing. The outlet through the shank is provided with a plug to regulate the quantity.
$
21.81
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
19.99
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Racine, United States
Pistons are seized one bearing cap is junk. Sold as is, I’m sure a soak in the e tank will loosen them up.
$
21.85
Buy It Now
Free Shipping
Condition: New
Location: Centralia, United States
Your looking at 8pc. brass carburetor bolts and lead washers Maytag gas engine hit & niss. Condition is New. Shipped with USPS First Class Package. With tracking.  I have been selling parts around the states of ILL and FL. for more than 22 years .  THANKS FOR LOOKING.
$
141.40
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Poly tank to last years. Can be used as stand alone tank or you can cut the bottom of your original tank out and us this as an insert inside the tank.
$
12.25
Buy It Now
$4.24 Shipping
Condition: New
Location: Fayetteville, United States
This manual covers from the 2HP to the 14HP Majestic engines. The manual is 8 pages. It covers the different sizes for all the parts and instructions and care of the Majestic engines. There are no pics of engines in the instruction manual.
$
19.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Placerville, United States
THESE ARE USUALLY BADLY RUSTED OR MISSING, NOW IS YOUR CHANCE TO COMPLETE YOUR ENGINE.
$
375.00
0 bids
Free Shipping
Condition: Seller refurbished
Location: Lincoln, United States
For sale I have a 1928 Maytag engine which has been restored and runs good  Has new rings and has new carburetor parts. and new decals  Engine looks new
$
46.21
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
I have made and sold thousands of these they were made for the Webster igniters and all others as a universal igniter point.
$
34.60
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Push rod cam roller and cam roller bolt for Galloway 1.75-2.25hp.
$
189.00
0 bids
Free Shipping
Condition: Used
Location: Campbellsport, United States
I HAVE FOR YOUR CONSIDERATION A VERY EARLY STEWART WARNER GEAR DRIVEN AIR TIRE PUMP. LET THE PICTURES PROVIDED BE YOUR GUIDE. THROUGHOUT THE YEAR.
$
43.49
0 bids
Free Shipping
Condition: New
Location: Hebron, United States
OE Part Number: 24-559-12-S, 2455912S 24 559 06-S, 24 559 09-S, 24 559 12-S ( Please confirm the item whether matches your OE part Number before purchase) Packing Included: 1 X FUEL PUMP KIT (You Will Recieve Everything Shown in The Pictures.) Applicable Models: For Kohler CH640-3016, CH20-64751-, CH18-62661, CH640-3042, CH620-3022, CH620-3034, CH640-3053, CH620-3023, CH641-3020, CH20-64717-, CH22-76589-, CH23-76635, CH680-3045, CH640-3038, CH620-3012, CH730-3301, CH640-3108, CH680-3105, CH680-3111 ( Please confirm the item whether matches your vehicle in the compatibility table before purchase).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Past Items  
 
This is a really neat original Barnes hand water pump. It was made by the Barnes Manufacturing Company in Mansfield. Ohio. It stands about 21 inches tall and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a brass pump cylinder that would polish up nicely! Everything moves as it should. These unusual pumps are getting tougher to find every day so if you'd like a conversation piece for the shows here it is. The pictures tell the story. You won't be disappointed in any way. Good Luck.
I HAVE FOR SALE A TIMING GEAR THAT WAS REMOVED FROM A 1 1/2 HP ECONOMY MODEL" E" ENGINE. I BELIEVE THIS WILL ALSO WORK ON THE HERCULES AND JEAGER ENGINES. BUT PLEASE LET THE PICTURES BE YOUR GUIDE. THIS PIECE ALONG WITH OTHERS I WILL BE LISTING WAS REMOVED FROM THE RUNNING ENGINE JUST LAST WEEK. ALL HARDWARE IS INCLUDED JUST AS IT WAS PULLED FROM THE ENGINE. THE TIMING GEAR HAS A TOTAL DIAMETER OF 5 3/4" THIS GEAR HAS 44 TEETH WHICH ALL APPEAR TO BE IN EXCELLENT COND. WITH NO SIGNS OF ROUNDING. THE CAM LOBE ALSO APPEARS TO BE IN GREAT CONDITION. THERE ARE NO CRACKS, BREAKS, OR WELDS ON THIS PC. ANYWHERE. I WOULD CONSIDER THIS A BOLT-ON READY PIECE. DON'T PASS UP THIS OPPORTUNITY TO FINALLY PUT THAT ECONOMY OR HERC BACK TO WORK AT THE SHOWS. I WILL BE LISTING MORE PARTS FOR ... moreTHE 1 1/2 E ENGINE IN THE NEXT COUPLE OF DAYS. THANKS FOR LOOKING! PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart o
Up for auction is this vintage Champion EXTRA LONG SPARK PLUG! This is a Champion 32 plug and the complete plug measures 4-3/16" long. From the bottom of the hex it measures 2-1/8" to the tip of the electrode. Plug takes a 15/16" hex wrench. I am not sure what it fits but was told it was old Hit n Miss or old maytags or may fit many old motors. The plug looks great and I am not sure it was ever used/ I would guess by looking in the bottom that it was not. Great Old usable and Collectable plug. Selling With No Reserve Actual Cost For U.S.P.S. First Class Mail Check out my other items!
For sale is one Allis Chalmers model 7000 diesel generator engine. Was tested and ran well. Pump is good. Turbo bearings are tight, ready to use. Will help arrange freight shipping or deliver personally to an address within 900 miles of zip code 67487 for $0.80 per mile.
Here is an ORIGINAL CHALLENGE No. 92 Catalog and along with it is an ORIGINAL Dealers' Price List No. 36A. This book is in good condition but due to its age the binding is not attached and as you can see from the pictures there is a whole punched in the top corner. This book is used so please look at all the pictures. It will make a nice addition to anyone's antique gas engine reference library. 6" x 9" 224 Pages Long. 35 pages long is the price list, Dated 1929, If you pick this part up at my house 7% sales tax will be added to the purchase price. If it is shipped or delivered out of state then there will be no sales tax. If you have the proper exemptions then also there would be no sales tax. My handling time is set at 5 business days after recieving payment. Most items ... morewill go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any and all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapi
This is an Original Igniter That Works with The Wizzard Magneto Setup. That was commonly Installed On the H& K Models of the John Deere/ Waterloo/ Waterlooboy Hit& Miss Gas Engines. This Has A 2 1/8" mounting hole spacing Like ALL Waterloo Engines.This will Fit All HP Sizes of Engines. But will Only work With the Wizzard Magneto setup. If your Engine Just Had Battery Coil Ignition, It would Have Had A standard Igniter With the part Numbrer on it. I see NO Damage Or Repairs.Selling As IS. This is A very Hard to find Piece for the Wizzard Magneto Setup. That Is Missing More Often Than Not. So Don't miss out on your opportunity to Complete that Waterloo Engine! This Item Weighs 2 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. ... moreAs I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
VINTAGE STYLE NAUTICAL FULLY BRASS MADE STEAM ENGINE COMPASS 100% Working Condition THIS BEAUTIFUL COMPASS MADE OF FULLY BRASS. THIS IS AN ANTIQUE REPRODUCTION. THIS COMPASS IS IN GOOD WORKING CONDITION. ITS NEEDLE SHOWS QUICK DEFLECTION OF NORTH SOUTH DIRECTION. DIAMETER OF THE COMPASS MEASURE APPROX 3 INCH WEIGHT OF THE COMPASS MEASURE APPROX 220 GRAMS. ITEM NOT SOLD AS AN ANTIQUE PLEASE SEE PHOTO OF ITEM FOR MORE DETAILS, PHOTO SAYS MORE THAN WORDS. If you have any question please feel free to ask: We are one of the Big collector in India with our reputed name since 35years. We have very deep knowledge on Vintage& collectable products. Our commitment to maintain international quality standards assisted us in growing leap and bound from our modest beginning to become the most preferable ... morechoice of the clients across the globe. We have been acclaimed in the international markets for the quality of our products. On time deliveries and transparency in business dealings. We are offering a comprehensive assortment of Vintage& Collectable products at affordable prices. We accept payment through PayPal as it is safest mode of payment on eBay Immediate payment required If any query regarding payment please E-Mail us. Handing Time- Item will be shipped 2-3 business days after receiving payment. Tracking Details- Tracking number will be provided once consignment shipped. Destination Charges- Import duties and other destination taxes would be buyer's responsibility. Bulk-Shipping Discounts- If you want to order multiple items together. We offer shipping discounts. The Shipping discount amount will vary and will be calculated on a case-to-case basis. Contact us for discount shipping BEFORE making the payment. Logistics and Delivery- We use reputed couriers for logistics. We deliver Worldwide. For major Countries we use reputed courier companies. For those country/cities/towns that are not serviced by our courier. We use the Indian Postal. For some reasons beyond our control or your area is not serviceabl
Fairbanks Morse Hit and Miss Z Engine. 1 1/2 HP. Rotates smoothly. Restoration project. Free delivery within 48 continental States. Please use eBay contact seller message format for quote to other zones.
This is a very rare original ignitor for a Smith Great Western hit and miss gas engine. It is in excellent condition with no cracks. Breaks or repairs of any kind. It is part number E240 and mounts to the engine with two 1/2 inch holes 3 inches apart on center. The points look like they have been replaced with nails many decades ago. These would be easy and inexpensive to replace if you so choose. This is a very hard to find part for a very hard to find engine so if you need one to finish a restoration or just for a spare on the shelf don't miss this one. It will likely be several years before another one turns up and it likely won't be this nice. The pictures tell the story. You'll like it. Good Luck.
I HAVE FOR SALE A SPLITDORF MODEL#30 MAGNETO FOR A FULLER AND JOHNSON MODEL N. I HAVE REMOVED THIS MAGNETO FROM A RUNNING 5HP FULLER AND JOHNSON MODEL N. IT IS AS NICE AS IT GETS. THE FACTORY MAG BRACKET WITH THE GEAR GUARD. ALL PIECES SHOW A NICE AMOUNT OF ORIGINAL PAINT. THE MAG IS HOT, I HAD IT TOUCHED UP ABOUT A YEAR AGO. IT RAN MY ENGINE JUST FINE. THIS IS THE REAR MOUNTED RARE MAG SET-UP FOR A 5 HP FULLER& JOHNSON. IT MOUNTS TO THE MAINCAP, AND RUNS OF THE CRANK GEAR. THE MOUNTING PATTERN IS 3 1/4" ON CENTER. THE LEADOUT TOWER AND NUT ARE ALL 100% PERFECT. THIS IS A PRETTY FLAWLESS PIECE. I HAVE SEEN THESE MAGNETO'S ALONE FETCH OVER $400. IF YOU HAVE A NICE FULLER AND WANT TO TAKE IT TO THE NEXT LEVEL, HE IS YOUR CHANCE. IT SEEMS TODAY TRINKETS ARE THE NEW THING(CLUTCH PULLEYS, ... moreMAG SET-UPS, SIDESHAFTS, FUEL PUMPS, MONKEY MOTION) GET ON BOARD BE THE ENVY OF THE CROWD. THANKS FOR LOOKING! PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there i
Original Onan Paper Manual. Not A Reprint Or CD, Many More Available Here is an original Onan manual from a retired Onan dealer. We have many many more. Some pretty scarce so inquire for your engine, alternator, generator, rv genset, welder or other Onan made equipment manuals. Thanks for viewing my offering. FIND US ON facebook. Midwest Farm Antiques& Industrial Sales. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f1d66754a-0xfb-
Here is a great set of 4 matching antique cast iron wheels. They each have 6 spokes that curve slightly. Giving them an attractive look. These wheels are 5 inches in diameter with a 1 7/16 inch tread or rolling surface. The axle hole is 11/16 inches in diameter. When we got them they were rusty, but we have cleaned the rust off of them with a wire brush and buffing pad. A small amount of light rust remains in the center holes and in between the spokes. These wheels are embossed with PA13 on one of the spokes. They came off of an old industrial scale cart. They would be perfect for a hit and miss engine cart, antique machinery display, or industrial furniture project.
Visit My eBay Store Resources Seller's other items About my eBay Store View other Auctions by category Generators AC Motors DC Motors AC Motor Controls DC Motor Controls Gear Motors Gear Reducers HVAC Fans and Blowers Lighting Electrical Parts Surplus Motor Speed Control Packages Phase Converters Test Equipment Breakers Receptacles. Plugs& Fuses We Have Thousands of products available. Let us know what you are looking for. Electric motors o DC motors o Single phase to 15hp Motor control o Electronic and mechanic motor protection devices o Magnetic motor starters o DC& AC speed controls o Medium voltage soft starters Power transmission products o AC and DC variable speed drive packages Fuses o Industrial power fuses o Electronic fuses o Medium voltage fuses Transformers Ventilation ... moreequipment Phase converters o Phase converters convert single phase to three phase Multiple motor loads in excess of 400hp available o Rotary and static models Power generation o Custom sets diesel 5 to 1000 kw o Custom gas 3 to 25kw o 1 and 2 bearing generators to 2000kw o PTO drive generator sets 10 to 160kw o High-speed gas air-cooled sets Power generator components o AC& DC metering(volts. Amps, hour, frequency, pf, kw) Analogue and digital o Safety switch engine safety and annunciator components o Voltage regulation o Electronic governing Power Factor Correction Technology Bid with Confidence 8V71 GM Diesel Engine for Parts Description: 8V71 GM Diesel Engine for parts. Payment: Paypal Shipping: Seller ships internationally(worldwide) Freight: See conditions below Store inventory: All of our ebay store inventory is stock to 2 weeks delivery check with us for current inventory level Overview 8V71 GM Diesel Engine for parts. Weight: 2500lbs, Customer Service To speak to a Friesen Electric specialist please call us toll free: 1-800-663-9414 Shipping Information Please provide your phone number for shipping purposes Seller ships internationally(worldwide) Freight Title of goods passes to the consignee's carrier agent
You are bidding on parts taken from a Volvo Penta Marine engine this auction is for the transmission taken from a engine with a broken head most all parts need to be cleaned may fit many other years and models sold as is Please ask questions before bidding We will combine on shipping when possible Canadian buyers please wait for invoice from me with taxes included before paying If Item is paid for without taxes included. Your Payment will be returned Canadian buyers will have to pay GST or HST depending on your location We ship to US and worldwide. International buyers please contact us for shipping costs. The delivery to the U.S is approx one to three weeks depending on the buyer's location All orders are shipped within three days of cleared payment The shipping and handling fees are ... morenon refundable
An Early Ideal Hit Miss Gas Engine Booklet in very nice original condition. This booklet shows great pictures of the early engines manufactured by this company in the factory setting and on location. This booklet measures 9 1/2" x 6 1/4" and appears to be complete. Inside is a stamp that is dated rec'd Nov. 30 1908 but I believe this is a catalog from 1907. A great early one to own for the collection. Check out our other early engine booklets. Shipping is by Priority Mail.
Up for sale is this Vintage Clinton Engine not sure of hp came off a Yazoo mower Thanks for looking
For sale is a F. E. Myers Hand transfer pump gas Engine Steam Tractor 1915 in good shape. The end of the unit has F.E. Myers Bros. Ashland Ohio 1915. The pump is frozen up. It may be freed up with a little elbow grease. I could not find any cracks or breaks on pump housing. Flange is broken. pic) Cast Iron construction. I was told that this pump was used as a transfer pump for a steam engines holding tank. The measurement are 24" long and 19" high. Please feel free to call 419-576-2165 or email questions. Buyer pays all shipping costs.
An Empire Engine& Boilers Booklet in good original condition. This paper booklet measures 3 1/2" x 6 1/2" and displays the various Empire portable and stationary vertical and horizontal steam engines and boilers. This booklet was from the S.S. Messinger& Son Co. Tatamy, PA. Great illustrations! Check out the photos. Shipping is by Priority Mail.
Antique briggs and stratton model ZZ pto cover part# 99936. Bead blasted and painted Nice shape for being used, great for the collector or engine rebuilder! We accept paypal and a 14 day return policy in affect. If you don't see it listed just give us a call at(540)273-7541 and we will be glad to help in any way we can. THANK YOU VERY MUCH! WE HAVE OVER10.000 PIECES OF NOS AND NLA INVENTORY. THANKS AGAIN!
Antique briggs and stratton Model ZZ cylinder head in Nice shape great for the collector or engine rebuilder! We accept paypal and a 14 day return policy in affect. If you don't see it listed just give us a call at(540)273-7541 and we will be glad to help in any way we can. THANK YOU VERY MUCH! WE HAVE OVER10.000 PIECES OF NOS AND NLA INVENTORY. THANKS AGAIN!
This is in good usable condition. Complete. Not stripped. This is an almost impossible head to find. Was taken off an engine with a bad cylinder. Fits E3CD E3CF E3CE. 931)492-0316 Posted with the
Antique Hit& Miss Gas Steam Engine Miscellaneous Brass Oiler Sight Glass Parts Selling With No Reserve! Hi! This week we will be Auctioning off all the rest of the Hit& Miss Engine and Steam related. Old Iron, parts and pieces that I have available. Please feel free to browse my Ebay store for lot's of great items! The Item that you are bidding on in this Auction is a lot of Misc. Oiler Parts and Pieces. Please check the pictures out. Help yourself to a great deal! Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt ... morepayment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold
Good used piston removed from Briggs and Stratton WMB cast iron engine that was not seized up. Comes with the piston rings and wrist pin. As seen in photos.
Antique briggs and Stratton Rope starter cup part# 290605.Great for the collector or the small engine enthusiast Part came off a running model A engine with a cracked block. Call for more info. 14 day return policy. We accept paypal and always combine shipping, Insurance is at customer request We have over 16.000 NOS and NLA parts in stock, if not listed just call(540)273-7541 THANK YOU VERY MUCH!
This is a Wisconsin electric engine BKND for parts or not working. The engine is missing parts and im not sure exactly which ones. It has some cosmetic wear from use and storage but still in good shape. It is a model BKND. Spec no. 407355 and serial number 5870604. Im not sure how much horse power it is. Please see pictures for more details on the condition and which parts are missing. If you have any questions please feel free to ask. Thank you for your interest in this post.
Nice old porcelain on steel sign and it measures 26x10 inches. Some chips but nice for the age of it. Kewanee Il was a place where many things were made and this sign was to advertise the elevator co. There were hit and miss engines made there also with water pumps and generators in the early 1900's and would be nice with an old engine display. Shipping in the states is $15.00. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13faceb11a1-0x108-
Vintage BRIGGS& STRATTON? Hit& Miss Gas engine motor with Delorto Carb breather cap filter. Motor looks complete. Motor spins freely, don't feel like there's much compression on this motor. I believe this is a 1 HP or 1 1/2 HP motor. No marking found. Motor has rust, muffler is rusted and bent, inner gas tank has rust but appears solid. Features a neat plastic Dellorto breather assembly that mounts to carb. I believe there is spark, had my hand hand on wire and got slight shock while pulling with a old rope. This motor being Sold as Non running motor for parts or repair. Sold as is as Found. What you see is what you will get. Measures approx. 11 3/4" Tall x 14" long x 10 1/2" deep. Filter and sparkplug will be removed for shipping.
From 1917 I am offering this ORIGINAL issue of Power Volume 46 No 20. Dated November 13.1917. 9" x 12" with 128 pages. Fred R. Low Editor. Great auto. Engine, turbine, air compressor ads and much more. See photos for details. No back cover. Front cover has separated from the spine. Otherwise all pages are accounted for. A very rare publication! For an easier transaction and to ensure proper shipping charges. Please wait to be invoiced before making payment. Much appreciated, thank you.
From 1887 I am offering this ORIGINAL journal from Power and Transmission Publications. Volume 2 No 9. 20 pages. Listed in Roman numerals. Features great graphic ads from various rope, tool, machinery and other manufacturers. Also a question and answer section, different formulas for applying power to various pieces of machinery. 12" x 9" A very rare publication! For an easier transaction and to ensure proper shipping charges. Please wait to be invoiced before making payment. Much appreciated, thank you.
This is a Type L25 Webster Magneto# 24619 It Fits Many Different Brackets. It Mounts with 4 bolts 2" X 2" Square pattern please check your Dimentions. Your Applications, This is The Diecast Body, The End Plates feel pretty tight for wear, Bolt holes look good on the bottom, Missing 1 Mounting Stud/Bolt. These Are commonly seen On Waterloo Boy Gas Engines. Hercules, Economy, Stover, Sattley, IHC, Witte& Many Other Types of Hit& Miss Gas Engines! Usually On The Engines That Are 2 1/2 Hp Or Bigger But It May Have Also Been Used on some of the smaller 1 1/2 Hp Engines also? This Came from An Estate Auction Of A former Magneto Collector& Repair/Restorer. If this was cleaned up I think It would work. There is One broken Ear On the Front Bearing Plate As can be seen in the Pictures. ... moreI see no Other Damage Or Repairs. A Hard to Find Magneto! I tried to get spark Out Of it but it looks like the coating is off the Lead-out wire& is grounding out. I did not Have enough hands to hold everything just right& trip it. BUT Everything Works& Moves like it should. Look The Pictures Over, As they Are Part Of The description, Ask Any Questions you May Have, Let me know if there is something You need me to check Or Look At Closely.Selling As IS. This Item Weighs 8 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
This fan is from a New way antique engine model d type f
One of the many model antique gas engines my late father.Eddie Mittelstadt,built in retirement.He sold many world wide and enjoyed displaying at the many shows though out America. This was built in 1985 for me and i displayed it at vista ca.San jose and here in iowa.Goodguys car event in Pleasanton Ca.I also came home on my vacations and went to many shows with him,mable minn,wannamingo on the 4th and many in iowa.Its in good shape.I hope to sell to a person who enjoys this hobby and will show and take care of it.I is about 50 pounds so hope to have it picked up or maybe i could deliver. 7 inch flywheels 11 1/2 inches high 13 inches including the skids mounted on a 12 inch square plate. water cooled. Thanks!All questions welcome.Hope i can answer.
Maytag model 92 rebuilt runs great. local pick up only no shipping,
One heavy duty cast iron wheel with a diameter of about 6 3/4. Width is about 1 1/4. Center hole diameter is about 1/2 inch. No welds or breaks. Wheel is in good condition. US sales only. Thanks for looking and good luck bidding. I will combine shipping when its to your advantage.
Heavy duty engine pulley. Base is about 1/2 inch thick. Outside diameter about 5 inches, width about 4 1/8, large hole in center about 3 1/8, 3 small holes are 7/16, bolt hole circle is 3 7/8. Pulley has no trademarks that I can find. No cracks or welds, good solid pulley. US sales only. Thanks for looking and good luck bidding. I will combine shipping when its to your advantage.
Up for consideration is a Wards Powerlite Generator by Ward Corporation Chicago. Very neat stationary engine and runs good ~ can be started manually or by electric start{ cables as shown for battery electric start} The muffler is detachable and has a screw in plug that will come with to keep engine clean. The model number for this unit is 74MX5131A-1 and weighs around 140 pounds. Kart is not included ~ generator only. Great addition for any collector ~ BIN or Make an Offer ~ thanks Buy with Confidence{ see feedback} Shipping will be a flat rate for everyone within the lower 48 states via FedEx 2-5 days. Insurance for the amount purchased and delivery confirmation included. Carefully Packaged and shipped within 48 hours of payment cleared. I accept Paypal only. Payment due within 48 hours of ... moreauction ending ~ thanks I take great pride in selling only good quality items. If there is a problem upon delivery please contact me asap. I will do my best to make sure you are completely happy with your purchase. Thanks for looking and please ask any questions!
This is a pretty rare original primer cup that I believe is correct for a Cushman Binder Engine. Of course it will fit many other hit and miss engines. It has 1/8 pipe thread. The valve works smoothly. I have never tried it on an engine but I see no reason it would not work. It has the normal age marks and good patina. But could be polished up if that is what you want to do.
UP FOR AUCTION: Engine Wolf Whistle This is Wolf whistle designed to operated by vacumn. It is 3 1/2" dia. by 6" tall. It has a label of a Wolf made by Voder Mfg Co. Little Rock Ark. It does not operate- It is missing the whistle part that goes in the horn end that makes it do the wolf whistle. Simple operation. If you have the whistle portion it looks a simple install. Please see the pictures for details and more description. Sold in"As-is" condition/ as shown. SHIPPING: Delivery Confirmation is included in the shipping charges. Insurance will be added. If requested, prior to making payments. For combined shipping. Wait until I send an Invoice, I may be able to save you some Shipping Charges. Next Business Day" After receiving payment. All Fragile items are"double-boxed" ... morePAYMENT METHOD: PAYPAL Please ask questions if you are unsure about something concerning this item. We are not experts. But we try to provide a detailed description, to the best of our knowledge. All items sold"AS-IS" condition. I sell primarily used items that I find at Estates Auctions. All items are generally in"used" condition. I try to identify and photo each and every flaw that may be present. Please take time to look close at the pictures. Particularly if I have identified an issue. Thank you for looking and Good Luck!
ANTIQUE BRIGGS OVERHEAD VALVE ENGINE.NOT SURE OF MODEL MAYBE FC OR FB. INTAKE VALVE WORKS ON LIGHT SPRING LIKE A HIT AND MISS ENGINE.THE CARB IS GONE ALONG WITH THE FLYWHEEL COVER.MAY BE OTHER THINGS MISSING TOO.LOOK AT PICTURE.ENGINE TURNS OVER AND NOT STUCK.IT IS NOT RUNNING.BUY IT FOR PARTS OR TO RESTORE.AGAIN LOOK AT THE PICTURES.NO BROKEN COOLING FINS ON THE BLOCK OR THE CYL. HEAD,THAT IS ALWAYS A PLUS.SOLD AS IS FOR PARTS OR TO RESTORE.
show buttons eup antique association.from the 90's
Antique Monarch Automatic Electric Pump The Monarch Engineering Company Dayton. Ohio Pulley spins and all connecting parts move freely. Please see all photos for a more accurate description. This is a twin cylinder pump and weighs almost 70 pounds so we calculated a high estimate for shipping cost(as if it shipped to the west coast) Shipping will not exceed the $75.00 listed and if it is less to your zip code. You will be reimbursed the difference. Thank you for looking and please email with any questions. Payment through Paypal is expected within 5 days of auction's end.
Hi Up for sale is a nice IHC tractor and whatever mag for a 4 cylinder engine.Unmolested everything looks good except outer band has cracked up.I held the one terminal without a cap and it gave me a good jolt turning by hand.I am not sure if the impulse is working as I am not sure how it works for sure.The mounting threads are in great shape as well as the big cap.This one will clean up nice,pretty sure you will not be disappointed.Thanks I ship fast.And will be packed to survive the postal battle it will go through. This is a USA Auction ONLY. Payment is due in three days.Please pay fast and you will get it fast. If you need different shipping other than the Post Office let me know I am sure we can work it out to suit you.Thank you and good luck. Postal MO are fine too.
TECUMSEH 5.5 HP ENGINE WAS RUNNING ON A POWER WASHER UNIT ENGINE RAN GOOD- OIL AND FUEL HAVE BEEN DRAINED FOR ABOUT 5 MONTHS HAVE NOT TRIED TO START SINCE SHIPPING SERVICE AT SELLERS DISCRETION- ECONOMY SHIPPING
You are bidding on a nice ratchet cover. Ball oiler, and nice governor for a Maytag 92 engine. Feel free to ask questions. Will combine shipping on items IF possible to save you money. Good luck and happy bidding!
You are bidding on a pair of original MAYTAG SCRIPT CHAMPION spark plugs for the model 72 twin cylinder engine. They are in very nice condition with no rust or pitting and only have light wrench marks. Both plugs are marked champion B with the maytag script on opposite side. I have not tested these so they are sold as is but see no reason why they won`t work beutifully. You are buying the pair of matched plugs. ITEMS SHIP TO THE LOWER 48 STATES U.S. ONLY
Used. Was running sometime back, still turns over good& should not take much to get this up& running again. may just need gas& could start right up? You get the motor/engine you see in pix. Shipping will be based on 82 lbs. See calculator for quote to your zip
For sale is a vintage Briggs and Stratton 5S engine complete with a functional 7.5VDC Sampson JR 100 watt generator. The engine is complete and runs well. I started it today on the first pull after sitting for over 24 hours from previously being started. There is no damage that I can see from the engine. It does smoke a little. But it idles great and runs well at high RPM. The Sampson JR generator appears to be manufactured for this engine based on the method in which it is attached to the block. It functions great and I see no damage to it either. It is a 7.5VDC system at 2.300rpm and produces 100 watts. To let the operator know the generator is working, a factory wired light bulb glows as it is running(the bulb is located just below the two female plugs) I measured the voltage out of both ... moreplugs and it measured around 17 volts. The auction also includes a treble light, pictured, that runs off of the generator. This set-up would make a great show or conversation piece at fairs. Tractor shows, etc. I will ship to the Continental US only and buyer is to pay for actual shipping charges. Thanks for looking, David
ESSEX Detroit lubricator dual feed oiler. All brass, does not appear to have been used, nothing broke. A unique oiler
This is the cooling hood upper and lower. The fan guard, the fly wheel plate and cooling hood top plate. ONLY THESE PARTS ARE FOR SALE. The nameplate is for reference only to show what engine this was used on and is NOT PART OF THIS LISTING. Shipping cost will depend on the buyers location. I will only sell to and ship within the United States.
Here is an old barn find cast iron Briggs& Stratton Model 6S rope start horizontal engine. It has good compression and spark. The tank needs cleaned as it has a fair amount of rust. The pull handle has been taped.
Here we have a 12 hp kohler engine i bought for a project it has been in shed for 2 years turns fine it ran fine when i bought it it is a K301 engine it has tag#E0025307 spec#47238B on tag it also has a electric clutch on it see all pictures thanx for looking! If you have any questions please feel free to ask before bidding. Please click the link below to see my other items for Ford. Farmall, Case, Allis Chalmers, John Deere and other parts. I DO NOT OFFER SECOND CHANCE OFFERS! Please communicate through ebay messages as i DO NOT CHECK MY EMAIL regularly. good luck and Happy Bidding! Check out my! Be sure to add me to your favorites! Powered by The free listing tool. List your items fast and easy and manage your active items.
Here is a pretty rare old engine. It is an Aerothrust engine used with an airplane prop and mounted on the back of a boat to push you through the water. This engine is NOT stuck. It turns freely and has the original ignition system, fuel tank and carb. all often missing. There are parts missing like th prop, prop guard and the boat mount. From what I have been able to tell they made 2 sizes of this engine a small about 2 HP and a large about 5 HP. This is the larger size. I am selling this for a 91 year old friend that had plans on getting it going and putting it on a Jon boat. He has decided that it just will not happen and asked me to sell it for him. The pictures show what is there, what you see is what you get. I do have it here in my possession and will be happy to take more pictures ... moreor look the engine over closer and answer any and all questions. The engine is being sold as/is and with a $0.01 starting price and NO reserve and will be sold to the highest bidder making this a true auction. If you are local you are welcome to come by and inspect it yourself just give me a call or email me and we can set up a time. Mike 978-479-9596 I will be happy to store the engine safe inside locked for up to 1 year, You are welcome to pick it up yourself. I will bring it to any show that I attend including Coolspring Oct or next June for no charge OR I will build a small box and bring it to any local trucking terminal and ship it freight collect for NO CHARGE. I do have a local Fastenall that I can ship from. I shipped a 41" flywheel from MA. to AZ for about $200.00 just as a reference. Thanks for looking and good luck.
This water well conductor cup is in excellent condition with good threads. Raised printing says A Y McDonald Mfg Co Dubuque IA. On the other side is a diamond shape with 82-31. There are no breaks or cracks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1402bba3ce1-0x103-
Antique briggs and Stratton SAF-T-VUE oil bath air filter all graphics very legible and very clean.Great for the collector or the small engine enthusiast 14 day return policy. We accept paypal and always combine shipping, Insurance is at customer request We have over 16.000 NOS and NLA parts in stock, if not listed just call(540)273-7541 THANK YOU VERY MUCH!
Kingston Brass Carburetor model"L-3" for a Tractor or engine. Looks to be in good condition and likely needs rebuilt. Everything turns free and nothing looks broken.
Nice rare magneto in good clean condition. Took lots of pics and ask your? Shipping will be added Posted with
FOR YOUR CONSIDERATION IS A COLLECTION OF(MOSTLY) JOHN ROBERTS STEAM ENGINE WATER PUMP PARTS 1891 pat date this is a project for the serious steam engine collector. I believe most or all the part are here.4. ANY QUESTIONS PLEASE EMAIL*PAYMENT IS EXPECTED WITHIN ONE BUSINESS DAY. UNLESS WORKED OUT PRIOR TO SALE. ALL SALES FINAL/NO RETURNS
This gas tank is for a Elgin(Maytag) Upright gas engine. It is in good condition except for the mounting ear. It is broken. This tank can be welded. These early gas tanks are getting hard to find. US sales only. I will combine shipping when possible, thanks for looking and good luck bidding.
For sale I have a Coles Model Engine which runs fine. When I bought it the person had it in a display case and I do not think it was ever run. I put a 6 volt coil on it and made a gastank which fits perfect between the front rails. The engine is the bigger of the 2 Coles Hitmiss models and it has 6 inch flywheels. Better pictures coming later. You can see it running here Buyer pays shipping and insurance and I accept Paypal. I only ship within the 48 states.
Description RARE FIND STOVER NO. 5 IDEAL DUPLEX MILL Up for auction is this RARE FIND ANTIQUE STOVER NO. 5 IDEAL DUPLEX MILL. This unit is in excellent condition for its age and has only one repair(brazed see photo) and is in working condition. All internal burrs are intact and functional. It was last used 2 years ago on some food grade flint corn being ground for coarse grits. This is a real nice older restoration corn grinder or grist mill to run with a hit and miss engine. These grinders are getting harder to find barn fresh or even at swap meets. Then when you do find one they usually need a bunch of work and have broken or missing parts. This mill measures 24" L X 17" W X 10" wide. Due to its size and weight( 65 lb shipping weight) this item will be for local pick-up or ... moreshipped via UPS GROUND at a cost of $85.00 to include insurance and delivery confirmation. THANKS FOR LOOKING AND GOOD LUCK BIDDING!
Maytag 72 engine exhaust with the cast end. Is in good condition. However as all old ones, is stiff. This provides the proper back pressure for your enngine to run correctly! Ignore shipping costs. Will ship UPS(unless buyer wants other shipper) buyer to pay exact shipping charges, no charge for packaging. You can pick up without charge(I will hold for up to 3 months after paid for)
Maytag 92 engine exhaust with hard to find cast ball-type end. Good condition. Will complete your engine collection! Ignore shipping cost, will ship UPS ground, buyer will pay exact shipping cost, no charge for packaging. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-140360ba88c-0xed-
Fairbanks Morse Z style D engine with 32 volt generator. Engine runs fine. Have not checked generator output, however the generator will act as a motor, starting the engine using a 12 volt battery connected to the battery terminals, so I believe the generator will work properly. Not original condensing radiator(will remove and package for shipment) Not many of these around! Originally used to charge 32 volt batteries when the wind didn't blow to drive the windcharger. Have a copy of manual and a copy of ZD engine operating manual to go with it! You can have the truck also, but it doesn't work well-too small wheels for this heavy engine. Not worth the cost of shipping! I will bolt to pallet and deliver to Fastenal store in Colby, Ks if buyer will arrange shipping with them, or will ... morehold for up to 3 months after payment for pick up without charge. I might be able to find it a ride to Portland show in August if buyer will pay for that.
No maker mark. But the previous owner of this crank identified it as belonging to a 3HP Fairbanks. All in good condition; catch for shaft is strong. OT224
Here is an old brass Bowen Mfg. grease cup and a Essex Brass sight glass. The grease cup is approximately 3 1/2" tall with 1/8 NPT. The oil sight glass is 3 1/2" with 1/4 NPT. Please see pictures and email any questions. Thanks for looking.
Here are 2 old brass grease cups. They are approximately 1 3/4" tall with 1/8 NPT. I do not see a makers mark on them. Please see pictures and email any questions. Thanks for looking.
This item is an antique Hercules Economy 6HP Hit& Miss engine. It is in great working condition. You can view it at: and I have another one here: It is used and in very good condition as you can see from the pictures and the video. You can email me with any questions you may have. I have this listed as local pick up only but you can arrange your own shipping. I will work with you any way I can. You will have 24 hours to pay for the item. Thanks for looking!
THIS IS A KABOTA D-722 MOTOR OUT OF A 7.5 ONAN DIESEL GENERATOR THE GENERATOR WENT BAD AND I PARTED OUT THE REST THIS MOTOR GAS ONLY 52 HOURS ON IT. IT'S LIKE NEW. RUNS GREAT IM STARTING THIS AUCTION OFF AT $300.00 DOLLARS WITH NO RESERVE THIS IS A. BARGAIN FOR THIS LITTLE DIESEL I HAD A FRIEND THAT PUT ONE OF THESE IN A GATOR WORKED GREAT CALL CHRIS OR EMAIL ME MY CELL IS 270-210-1453. Thanks CALL ME TO SHIP THIS CAN'T GET SHIPPING CALCULATOR TO WORK. THANKS AND HAPPY BIDDING Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1403dc3c5db-0x100-
This is a pretty nice original sales catalog for the Fairbanks Morse Type Y Horizontal Oil or Diesel engines. It measures about 8 1/2 x 11 inches and has 20 pages including the covers. It is jam packed full of information and specifications for these engines and has a lot of information about the special features and auxiliary equipment that was available for them. It is in good condition with some minor wear and soiling and also some pencil notations that was likely a price quote for a 20hp engine. It would be a fine addition to your early engine advertising collection especially if you have one of the Y engines. It would also look great displayed with your engine at the shows. These originals certainly don't turn up very often so don't miss your chance on this one. The pictures tell ... morethe story. You'll like it. Good Luck. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-140411a361d-0xf9-
This is for a good. Clean metal fuel tank, good shape, clean inside, do not see any rust, outside is solid, looks to be about a gallon tank. If you need dimension, please ask.
VINTAGE GENERAL ENGINE. Model D by General Engines Co. Division of Leuthesser Brothers Franklin Park. Illinois ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Vintage engine. Sold by Sears Roebuck& Company and possibly other stores. General purpose stationary motor. With good compression. Top mounted fuel tank, side muffler. Some surface rust, as seen in photos. Needs some minimal general maintenance to bring it to full working order. I do not have much other information for this engine. I am not sure of the actual use for this engine as marketed by retailers. Not much information is available online or through the original manufacturer. Operation. Maintenance& Parts Manual for this engine is listed in a separate auction on my site. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... morePlease email any questions you may have prior to bidding to avoid any confusion. Local pick up is available if possible. Shipping is by parcel post. Thanks for stopping in!
Maytag 92 kickstarter. All working parts in good shape!
This here is a nice Economy starting crank for a stationary engine. No cracks welds or breaks. If you have questions call or text me at 1-260-349-3201 during the day. Sold as is.
This engine crank is in very good condition. The catch lever is in good shape also. No breaks or welds. Questions call or text 1-260-3201 during the day. If you call at night leave a message and I will get back with you.
PEERLESS STATIONARY STEAM ENGINE Formally used to operate a saw mill. Apprears to be complete. Engine was tested on air& turns over. Did not test boiler- don't know condition. Length 11' height 7' flywheel 48" X 10" Nice sleigh type skid. Included is the stack I keep inside- 9' high with mounting flange. Taken off to paint- but never did. No visable cracks or welds. I can help arrange a hauler and assist with hauler. Any questions don't hesitate to ask. Thanks for looking/bidding.
Here we Have a Lot of old spark plugs from Champion#7.The electrodes show little wear. The porcelain is not cracked.Good for parts or see if you can get em to work or display them.Will combine shipping Thanks and Good luck If you need specifics on something let me know. Pictures are part of my description please look closely and ask questions if you have one Thanks and Good Luck I ship fast.And will be packed to survive the postal battle it will go through. This is a USA Auction ONLY. Payment is due in three days.Please pay fast and you will get it fast. If you need different shipping other than the Post Office let me know I am sure we can work it out to suit you.Thank you and good luck. Postal MO are fine too.
Here we Have a Lot of old spark plugs 3/4" take apart Most have there brass tops and are in good rusty shape. Blue Cross TF Tiger TX& T7(not pipe thread) Wards Standard and a Wards Supreme. Titan I think its an AC plug.All are pretty solid the porcelain not cracked though I have not taken them apart.Good for parts or see if you can get em to work or display them.Will combine shipping Thanks and Good luck If you need specifics on something let me know. Pictures are part of my description please look closely and ask questions if you have one Thanks and Good Luck I ship fast.And will be packed to survive the postal battle it will go through. This is a USA Auction ONLY. Payment is due in three days.Please pay fast and you will get it fast. If you need different shipping other than the ... morePost Office let me know I am sure we can work it out to suit you.Thank you and good luck. Postal MO are fine too.
Here we Have a Vintage Handle you could put on your engine cart about 8"long nice heavy galvanized cast iron.Has a great classic form. If you need specifics on something let me know. Pictures are part of my description please look closely and ask questions if you have one Thanks and Good Luck I ship fast.And will be packed to survive the postal battle it will go through. This is a USA Auction ONLY. Payment is due in three days.Please pay fast and you will get it fast. If you need different shipping other than the Post Office let me know I am sure we can work it out to suit you.Thank you and good luck. Postal MO are fine too.
This is a antique Briggs and Stratton engine that probably dates to the 1940's. I was told the gear reducer model was used on a washer machine. The ID tag says Sears and Roebuck Model 500 Serial Number 206350 which makes it a Model I. I think it is complete and it spins over. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-140471496a5-0xf7-
Local pickup only! Up for auction is one Sattley for Montgomery Ward 1.5 horsepower stationary engine. One cyl. Flat head all iron engine. Fuel and oil tanks in base. Seems to have great compression, and was under restoration when I got it. It does not make spark currently, but it seems to have all components to do so. I believe the only thing missing is an air filter. Fluids are drained. Comes with custom made socket that fits in a 1/2 drill chuck(seen in photo) for rotating engine for starting. I do not have time to pack this for shipping. Local Pickup only. Paypal only. Payment required within 3 days of end of auction. Pickup within 2 weeks of end of auction, but the sooner the better. Non-paying bidders will be reported to eBay. I have 100% positive feedback for a reason! Thank you, and ... moregood luck bidding.
Here we Have a Vintage carb for a briggs letter series engines the H and the T.The carb is in nice shape it has wear scratches and minor corrosion spots.Shaft is pretty solid.Cork float looks very good. should be ready to go.make sure this is what you need please. If you need specifics on something let me know. Pictures are part of my description please look closely and ask questions if you have one Thanks and Good Luck I ship fast.And will be packed to survive the postal battle it will go through. This is a USA Auction ONLY. Payment is due in three days.Please pay fast and you will get it fast. If you need different shipping other than the Post Office let me know I am sure we can work it out to suit you.Thank you and good luck. Postal MO are fine too.
This is a vintage Briggs and Stratton engine model WI I believe. Please look at the pictures and ask questions. I'm not an expert on these engines but I did recently acquire a nice vintage collection. This engine is missing some teeth. See picture, on the wheel. Stands about 14 inches tall not counting it wood base the motor is mounted to. Professional packing. Shipping, insurance and tracking is $50 Local pickup is welcomed. Posted with
up for bid is this briggs and Stratton wi engine has compression and very faint spark happy bidding
This auction is for the pictured Iron Horse 4 cycle gas engine. I bought several small motors from collector. This is model x-405 and is a kick start. Although is is in good solid shape. It has not run for a few years. Pulley move freely. Please ask questions. Professional shipping. Packing, insurance and tracking is $62.50 Local pickup is also fine. Posted with
Model VJ Monitor pump jack engine. 1 1/4 HP. Complete engine. no cracks. Welds, or breaks. the man i got this from had it running a few years ago.it has been in the barn since then.it has the original battery box and muffler.this is a nice engine and with a little clean up it should run fine.i will start the bidding low so everyone has a chance.buyer can pick up local or i will pallitize no charge.buyer pays shipping.i have used best way for shipping.best way has the best price.i can store till buyer picks up.email or call with questions.417 388 0632 cell.leave a message and i will return your call.i have other engines i will be listing on ebay soon.this engine has been in a collection for over fifty years.
Nice old brass machinery tag. Improved Haugdahl Starter Can Mfg by J.G. Cherry Co. Cedar Rapids and St.Paul Minn. It measures 6 1/2 x 2 3/4 inches and has serial number 1239. Shipping in the states is $3.00.
United Hit and Miss Engine. 2 HP, Model A I purchased this in 1996. It worked fine, but I wanted to restore it. I have always restored old tractors. I took it apart, had it sand blasted, I primed and painted it and the parts. Never got around to putting it back together. Got busy doing other things and I am cleaning out the shop now where it has been stored and want the space. It has been in a dry environment and covered, but it has gotten dirty through all these years because I pretty much deserted my shop and let it go. Now I am ready to reclaim it! I cleaned on the engine a bit, but it will need a good cleaning. It wipes off real easy, I just didn't have the time before I had to leave for work. The parts have been stored in a box, so they look pretty clean. It is on Walnut Skids with ... morea homemade Walnut Pulley. The Head has been bored and sleeved by professional motor builders. Has new rings. I have new United Stickers for it. As well as I remember, everything is all there. The pictures are as well as I could get back in the shop. I'll try to add some better ones tomorrow, if it isn't raining again. I did notice a scratched place on the paint on the back of the engine where something got shoved up against it where it was stored. I took a picture of it. I am leaving enough space in pictures for 2 more pictures to be added tomorrow. I'm sure there are things that I am forgetting to mention. Please let me know if you have a question and I'll get back with you as soon as I can, thanks. Pick up only.
Here is a COKAL CHAINLESS STOKER ORIGINAL CATALOG. This is a slightly used book. So there may be some minor dirt and finger prints. Please look at all the book and decide if you need this picture for your collection. 8-1/2" x 11" 30 Pages Long Dated 1923 My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any and all questions. I will even answer ... morequestions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapist if you need help. So if someone doesn't pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven't caught on this is supposed to be mildly funny but yet serious at the same time. I will only accept returns if there is an error in my listing. If you decide you don't want it or find another one cheaper you I won't take it back. For example if my measurements
Here is a MODERN FARMER ORIGINAL Catalog. Published by Lehigh Portland Cement Co. Indianapolis. Indiana. This is a slightly used book, so there may be some minor dirt and finger prints. Please look at all the book and decide if you need this picture for your collection. 6" x 9" 62 Pages Long My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any ... moreand all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapist if you need help. So if someone doesn't pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven't caught on this is supposed to be mildly funny but yet serious at the same time. I will only accept returns if there is an error in my listing. If you decide you don't want it or find another one cheaper you I won't take it
Welcome To K45- On the auction block: Vintage Magneto. Small piece damaged- see photo. K45- Your Passport To The Past.
Here is one of the Maytag washing machine engines. It is a single cylinder, also commonly know as model 92. Someone went through the engine and refurbished it as needed. The original Champion spark plug has a nice spark and with the proper 16:1 fuel mixture it shouldn't take much to get it running. May have to learn how to properly start these engines because that is always cause for headache and frustration. Looking over the engine. I did not see any breaks, cracks or welded repairs. Unfortunately I cannot make out a serial number on the flywheel rim, but these engines where made from late'20s to mid'30s. It does have a air breather, which normally would put it in the early'30s. The ID plate is quite faded, but it is stamped that this engine was mounted on the washing machine ... moretype 16, 26. It is the short tank base. The engine overall has a coupel spots where either old residue from decals or possible fuel spills discolored the paint. Looking over the pictures, you can see that this engine is mostly redone with all original parts, brass screws at carburetor, tank mounting screws, set screws at the pulley, they have not been substituded with Home Depot hardware. I would place this in the ready to go category. It is not restored to a shiny, show stopper standard(those already fetch over $ 500) or is a garage/barn beater which also demand there price and all necessary parts you need will add up in the hundreds. Please ask questions before the auction is over. The approx. shipping weight is around 65lbs(not including the packaging) It is mounted on a home made skid. Which of course, I can dispose off to lighten the load for shipping purpose. Pickup in the N.GA mountains is welcome. If the engine should go over the 250 mark, it it possible I can deliver to Portland/Indiana swap meet end of August(not set in stone yet) I probably will list a couple more bits and pieces from my garage. To make room for new and old projects.
Here is another small vintage. Collectible engine. Unfortunately it does not have a data plate, but probably belongs to the Briggs WMB. WI, 5S? series. It is painted in all correct black. Has the correct oil bath cleaner and carburetor. Muffler is missing, but for a couple bucks you can purchase a aftermarket reproduction muffler. The tank as a couple minor dings, although previously cleaned, I guess the high humidity produced a new layer of small rust spots. So the first couple runs you may want to clean out the sediment bowl more often. This is a rope start model and probably was used to power a lawn mower. It does have a good spark and you can see the engine has been gone through. Because of all new gaskets at the oil pan, carb. I will drain the oil and pack properly if it needs to be shipped. ... moreThe engine weighs approx. 45lbs and I will ship this most likely FEDEX ground. Payment during pickup in the N.GA mountains is welcome. I have a couple other small engines listed in order to pass some on to younger or newer collectors. Start your kids with one of these easy going engines. Replace the worn out one on your lawn mower or gokart. Questions are always welcome. But not 5 minutes before the auction ends.
Vintage Champion Ford Spark Plug- A 25 With Box Please Look at Photos Box missing Flap on Bottom All Shipping on Tuesdays
Vintage Power Products Tecumseh Lauson Go Kart Mini Bike Engine 2 Cycle Stroke I believe it was in the early 1960s when Tecumseh. Lauson and Power Products became one company. This engine has all three names on it but I could not find a model number. It was probably on a decal, now gone. 2 stroke. Untested but engine does spin over with good compression. The shaft is 5/8" diameter and 2-1/4" long. See my other engine auctions. I will be listing several antique engines over the next several weeks. See photos in super size for condition. Call me 10am-7pm Central Standard Time with any questions. Patrick 816-810-1161. Or feel free to email me. Local pick up and payment is always welcome. We do buy and resell from estate sales and cannot guarantee that items come from a smoke and or ... morea pet free home. Please see my other listings. My wife's ebay accounts are kimberly7099 and packratmayhem. We combine shipping when possible. Remind us if buying from different accounts. By bidding on my items. You agree to the following terms: Buyers responsible for insuring this item suits their needs before bidding. Payment due within 5 days of sale date. If you have a problem with your order. Please email me through ebay( I check ebay messages daily, I don't always check my regular email) before filing a claim or leaving negative feedback so I have a chance to correct the problem. No warranties or guarantees expressed or implied. For returns with reasons other than"Significantly Not as Described" We charge a 15% restocking fee. Items may be indiscreetly marked and photographed to identify for returns, no refunds will be given for items that do not match our marks. Please be sure the item is the one you need BEFORE you bid. I list items,to the best of my ability,their proper application and interchangeability, but I am only human and mistakes can occur. You are encouraged to research items yourself to double check their proper application. This step,along with good communication, will ensure a positive ebay
out of an estate- do not know the size of engine or horse power- looks like a new spark plug& plug wire- do not know the condition of the engine- does fire& has good compression- if is as good inside as is out side- is a gem- shipping figured by shipping wizzard to your zip code& includes insurance and signature required confirmation- DO NOT SELL OUT OF THE US- check my other auctions as sell coins. Collectibles, and antiques-
This offer is for the Webster magneto shown. All the parts move freely but probably the whole thing needs to be cleaned. It was covered with oily sawdust. I tried cocking and tripping the starting lever. But did not see a spark at the breaker points. The points are opening and closing. There are no parts that are rusted tight. There is no damage or repairs. The bracket has two 17/32 holes, 2 3/8 inches apart. I have seen this same bracket listed for a Galloway engine. The whole unit is complete. It even has the brass oiler cup and starting lever still intact. YOUR SATISFACTION IS GUARANTEED. Please contact us before leaving a low rating if not fully satisfied. Tracking. Handling, and Packaging, are Included. Payment must be in U.S. Funds. Do not send cash. No hidden reserves. Don't forget ... moreto bid!
WOODPECKER ENGINE MODEL CASTING KIT-RICHARD SHELLY AND SONS. I purchased this at an estate sale. So I do not really know anything about it. What you see in the photos is what you get. There are plans included. Ask questions and I will try to answer.
GALLOWAY ENGINE MODEL CASTING KIT-RICHARD SHELLY AND SONS. I purchased this at an estate sale. So I do not really know anything about it. What you see in the photos is what you get. There are plans included. Ask questions and I will try to answer.
Auctioning a vintage clinton engine. The model and ID tag is missing but I believe it was a forerunner to the model 700. This unit starts on the first pull and will run for hours on just a quart of gasoline. Recently I quickly refurbished it to fumigate some mice that were taking over an outbuilding of mine. I removed the head and decarbonized the combustion chamber. Cleaned the carb and cleaned up the mag. It was a quickie but it now starts on the 1st pull and runs till its out of fuel. Anyway the mice are either dead or moved on over to my neighbors place. NICE LITTLE ENGINE& A GREAT FUMIGATOR Will ship to the lower 48 for $41.95 shipped via UPS at ground freight rate
It runs great and sounds better but didn't at first. The piston was stuck with grunge and removed by using a plate over the port and pressing it out with a grease gun. Another problem it had was the plate where the piston rod attaches was not connected to the flywheel shaft. A small pulley with a set screw was used and JB welded to the plate. The set screw allowed the right timing spot to be found which turns out to be after the flame is drawn in the slide valve closes right before the piston reaches full travel which cools the hot air by pulling on it a bit that's just a theory. The plate wobbles just bit where the piston rod attaches but not enough to effect operation. Several different fuels were tried now I don't remember the best. What ever you use test it on the bottom it ... moremay act like a solvent on the paint avoid getting any on the label. Good luck bidding. Paypal and US shipping only. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1406aeacbcf-0xfe-