In 
Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
94.99
Buy It Now
Free Shipping
Condition: New
Location: Rajkot Race Course Road S.O, India
Bukh Marine Diesel DV20 Engine Gasket Set 032D4201 without Oil seals and washers. DEV PRECISION ENGINEERS - BUKH GASKET SET 032D4201. Bukh DV 20 2 CYL MARINE DIESEL ENGINE 20HP. Also suitable for BUKH ENGINES – MARINE Diesel Engine.
$
19.77
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Made in the USA. These all brass check valves have a low tension spring inside, and with the spring they can be mounted and used in any position. The light spring gives them a very low cracking pressure, in other words low fuel pressure will open the valve.
$
75.00
Buy It Now
Free Shipping
Condition: Used
Location: Robersonville, United States
2 Cast Iron  Corn Grinder PLATES Feed Burr Mill Hit Miss Motor Stover great shape.
$
20.62
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
20.00
Buy It Now
Free Shipping
Condition: Used
Location: Orient, United States
Flat Belt Pulley. holes have been drilled all around the pulley. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back.
$
75.78
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This is the that mounts the flywheel to the crank shaft and the pulley goes on it.
$
6.99
Buy It Now
$4.00 Shipping
Condition: Used
Location: Diamond Point, United States
"Care and Repair of your Power Mower". Details on servicing and cleaning small single cylinder air cooled engines. Has a great pictorial section on stripping down and repairing a Briggs & Stratton.
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Lake Orion, United States
This is from the Harbor Freight Predator 212cc engine sku 60363.
$
5.99
Buy It Now
$5.90 Shipping
Condition: Used
Location: Omaha, United States
$
17.83
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Description: This is a nice International LB Engine Manual.  This book covers the 1.5-2.5hp and the 3-5hp LA engines.  But it also has LOTS of info that will help you with the LA engine.  A lot of customers will buy both the LA and LB books.  Covers a lot of info in a good sized book.  53 pages and measures 9 by 6. Well put together and covers a lot of material.  -
$
17.00
0 bids
$4.00 Shipping
Condition: Used
Location: Marine City, United States
Good condition please look at pictures
$
25.84
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Made in the USA. Quality part! Includes tank fitting.
$
15.40
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Brought to you by the oldest and largest dealer and Manufacturer of reproduction John Deere Engine parts in the country.
$
800.00
0 bids
Free Shipping
Condition: New
Location: City of Industry, United States
Gross Weight: 110lbs (50kg). Steam Generator For Bath. Portable Oxygen Concentrator. Gasoline Engine 15HP 389cc OHV 1" Horizontal Shaft Recoil Start with Oil Alarm. Keyed Electric Start and Recoil Start.
$
49.99
0 bids
$10.00 Shipping
Condition: Used
Location: Bluffton, United States
And wood handle 5 1/2" long.
$
315.00
Buy It Now
Free Shipping
Condition: New
Location: Coldspring, United States
DEUTZ IDLER PULLEY.
$
29.99
0 bids
Free Shipping
Condition: New – Open box
Location: Claremont, United States
New old stock Lube Devices drip oiler. Obsolete model RDF106-03, 8 oz polymer reservoir, 3/8" NPT pipe thread outlet fitting. Aluminum construction with brass toggle shutoff. Vented fill cap. In original paper packaging, dusty from storage. Some have a little corrosion from storage. Approx. 2.75" wide by 7.375" tall overall. Weighs 6 oz. Thank you
$
14.20
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
If you have any other gaskets for this engine or any other engine that you would need made and you have an original gasket off of the engine, give us a call. We may be about to get a die made and cut out the gaskets!
$
14.07
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A nice looking solid brass with tee handle drain cock.
$
43.66
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Horizontal use. Forged brass body with the correct square cap.
$
9.99
Buy It Now
$10.60 Shipping
Condition: Used
Location: Omaha, United States
For sale is a used Briggs and Stratton model N or 6S Cast Iron Cylinder Head.
$
38.57
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
High quality nickel alloy.
$
200.00
Buy It Now
$10.00 Shipping
Condition: New – Open box
Location: Joliet, United States
100 - Gets Mfg. Co. USA Oilers 1/4'' These are NOS.
$
17.09
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
17.22
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Covers most/all engines 1.5hp to 60hp both throttle governed and hit & miss. We got it cleaned up pretty well. It covers a lot of stuff on lots of Stover engines. As well as Mags for them. A good read and 28 pages.
$
200.00
Buy It Now
$11.99 Shipping
Condition: New
Location: Yukon, United States
When tuned, these engines start easy and run great, but because of there design they smoke really good. Especially if tuned a little rich. As for myself and others, I am wanting the youth to take interest in this great hobby and what a better way than aSmoke blowing Liberty bell 🔔,on the end of your engine.
$
71.93
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
225.00
Buy It Now
$74.95 Shipping
Condition: For parts or not working
Location: Bennington, United States
This rare piece of machinery is perfect for collectors and enthusiasts of old engines. Don't miss out on the opportunity to add this gem to your collection or use it for your next project. I'm not expert on many things and cannot describe every detail, so look closely at pictures.
$
800.77
0 bids
Free Shipping
Condition: New
Location: City of Industry, United States
Steam Generator For Bath. Portable Oxygen Concentrator. Keyed Electric Start and Recoil Start. Starting system: Recoil or Electric. Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured.
$
20.32
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Includes 5.
$
249.95
0 bids
Free Shipping
Condition: Used
Location: Jamestown, United States
Original Wico EK Magneto for a hit & miss gas engine .in great condition all the covers are in great condition with no dings including the bottom cover which is almost always missing. everything works as it should and makes a spark when tripped with a screwdriver
$
40.00
0 bids
$9.00 Shipping
Condition: Used
Location: Lincoln, United States
For sale I have spark plugs with Champion 34 Gas engine special on side of plug. These are take apart plugs that can be taken apart and cleaned good . I put these plugs in my Maytag engines and they run good .
$
12.25
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
This book covers the care and operation of the Light Weight 4 H.P Cushman. Well put together and covers a lot of material.
$
11.29
0 bids
Free Shipping
Condition: New
Location: Le Mars, United States
$
24.95
Buy It Now
Free Shipping
Condition: Used
Location: Spring Hill, United States
About 4" long. I am not an expert, but happy to share what information I am told or have. Good Luck.
$
17.70
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Fits: H1, H4, F4, F6. Used in the H1 mag and on the International LA/LB engine and lots of other applications. A great way to get your engine back up and running as good as new! Part: International Condenser H1 H4 F4 F6.
$
19.05
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A great tool to remove your stuck piston from the jug. Bolt the plate onto the exhaust port and screw the fitting into the spark plug hole.
$
27.72
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Glass Bowl In-line fuel filter for small Briggs & Stratton engines.
$
9.95
Buy It Now
Free Shipping
Condition: New
Location: Mandeville, United States
Length: 80mm Total Length. Interchangeable OEM spark plug part numbers Standard plug type. 800LS MOTO. 755LS MOTO.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Sacramento, United States
1923 MODEL T WATER PUMP Polar Bear Pump Co sandblasted spins freely Ford VTG.
$
12.85
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
8 pairs of oiler gaskets. Sizes: #0, 1 1/4"; #1, 1 1/2"; #1 1/2, 1 3/4"; #2, 2"; #3, 2 1/4"; #4, 2 1/2"; #5, 3"; and #6, 3 1/2".
$
12.24
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Replace your broken oiler sight glass with new! This is the cheaper way to go if you don't want to buy a whole new oiler. Just replace the glass and get the old working like new again!
$
15.41
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A nice looking solid brass with lever handle drain cock.
$
12.74
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
10.19
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Item #2279.
$
5.46
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Specialty coating, sealer and bonding agent. Hundreds of other uses as a coating, sealer and adhesive. Be sure to test any of these last on scrap material to see if it will work. Sanding the surface may help in bonding.
$
34.68
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
A tune up kit for the JD E series engines it fits all 3 sizes of engines. It consists of both the springs that were re engineered to provide the proper tension not just a copy of a copy of a copy like the other guys, a pair of my custom made Stainless Steel points, and a bag of Mica washers plenty enough to do the job and a pair of the correct length cotter pins.
$
14.20
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Warrantee: I dont warrantee any of my parts per say.
$
40.51
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! This pulley will fit any of the 92 series engines, your engine might say 92, 31, 92M, 11-111 ect. As long as your engine is the single cylinder engine with a kick pedal on it this will fit.
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Part: Double Male 1/8 Pet Cock.
$
12.01
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Fairbanks H, Jack JR, 3 rings. McCormick Deering IHC, 1.5hp, 4 rings (M with ignitor model). This way you can buy 3 rings or 4 either way. Part: 3 1/4 x 1/4 Compression Piston Ring #463. And as always our advice is always free!
$
12.85
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
It is a compilation of several old publications all put into one booklet. Has info on fuel systems, timing, maintenance and troubleshooting. A very good source for info and help! You can also learn a lot just from reading through it.
$
39.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Egg Harbor City, United States
$
60.76
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Part: Stover CT 2, 3, 4 Muffler & More. Will fit lots of other engines as well and works great on many models. A really nice muffler and super nice quality! And as always our advice is always free!
$
34.99
0 bids
Free Shipping
Condition: Used
Location: Orient, United States
I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated.
$
30.00
0 bids
$8.00 Shipping
Condition: Used
Location: Marine City, United States
This is a nice vintage Lunkenheimer grease cup number 2 Please look at pictures.
$
34.60
Buy It Now
Free Shipping
Condition: New
Location: Le Mars, United States
Push rod cam roller and cam roller bolt for Galloway 1.75-2.25hp.
$
45.99
0 bids
Free Shipping
Condition: New
Location: Hebron, United States
Type:Crank Shaft Adapter. Durable, Stress proof.Its much more durable and will not break. We have poweful partner factory to sure our price can be the best ! Service to every rider over the World is our target !
$
16.50
0 bids
$4.50 Shipping
Condition: Used
Location: Rocky Mount, United States
Briggs & Stratton Operating And Maintenance Instructions, Vintage, For Engines . Condition is Used. Shipped with USPS Ground Advantage.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 In 

Past Items  
 
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Just one of inkFrog's Creations Description: Dental Review July 1914 Volume 28 No 7 Pub by H D Justi& Son. Chicago 95pp of articles and 36 pages of dental advertising Wonderful antique ads for Fountain Spitoons. Dental engines, amalgams, gold foil, porcelain teeth, dental brackets, cements and mixing slab, medications, Waite's antiseptic and anesthesia without cocaine, Johnson and Johnson Dental Floss, many dental colleges, and lots lots more. Payment and Shipping: TERMS AND CONDITIONS I am happy to combine auctions when possible. ... moreSome items might make it impractical but I will do my best to provide safe and reasonably priced shipping! I accept PAYPAL. PLEASE TRY TO MAKE PAYMENT WITHIN 24 HOURS. I SHIP WITHIN ONE DAY FROM TIME PAYMENT IS RECEIVED. inkfrog terapeak. I000000.
this engine is show ready starts and runs good pickup only buyer to pay all shipping for more info 859-329 1836
Up for auction is a beautiful wood and brass steam engine boiler. This boiler is almost 19 inches long from on end of piping to other with the boiler itself being 10 inches long and about 13 inches around and over 5 inches high. This boiler is in great condition and very clean. I do not know if any parts are missing and has not been tested therefore is sold as is. Please email with any questions and check my feedback as I have sold other models to other happy customers. I also have other engines and boilers up for auction so check them out. There is no reserve so bid with confidence. Happy bidding!
Stover CT1 throttle governed mixer.Similiar to the CT2 mixer but uses 5/16 mounting holes instead of 3/8 holes used on a CT2. I just overhaul it.Nothing broken seized.Butterfly turns freely,has 1 new needle valve and 2 new needle valve springs.It is ready to bolt on. The only unusual thing is the hole drilled on the side of the reservoir.I don't think that is factory done and for what purpose is unknown but does not effect filling the bowl to 75% West System resin is applyed inside the bowl to eliminate rust when the engine sits for long periods(I have used this and works great) The aluminum piping is not original. Any questions please ask.
For sale. A running Cushman Cub 3hp engine. The engine was restored at some point before I got it, and the original magneto has been replaced with another. I think that it is from a Wisconsin engine, but I am not sure. A previous owner has put a sprocket on the crankshaft to run the magneto. I have included several pictures of this different magneto and bracket, as a picture can explain it much better than I could. The engine runs, and it should only need a little tinkering to get it show ready. I will load this onto a pickup or truck at no charge. I can ship it via Fastenal at the buyers expense. The magneto was just rebuilt by a local professional and is hot. Don't hesitate to contact me if you have any questions. See video of the engine running
This is an Original Pair of Main Bearing Inserts. For a 1 1/2hp John Deere Type E Hit& Miss Gas Engine. 1 1/4" Crankshaft As You Can See they Are A Complete Set& In Useable Condition. The Bearings will Only Need minor cleaning, They seem to be In good Shape with Plenty Of Material There. I see NO Damage Or Repairs.Selling As IS. This Item Weighs 3 LBS! FREE SHIPPING TO ALL US POSTAL CODES. INTERNATIONAL SHIPPING IS ACTUAL COST I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You ... moreReceive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
This is a Wico EK Magneto Trip For possibly Economy XK Or Stover. Witte, Nelson Bros, Sattley, Field Brundage, And/Or Possibly Others! It is Part# GE4033 Has Pat Oct 30 1923 On one side everything moves as it should spring is good No Breaks Or repairs Mounts to A 9/16" round detent Shaft. NO Damage Or Repairs.Selling As IS. This Item Weighs 3 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct ... moreAmount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e2325d176-0xf2-
Economy scale model gas engine in running condition. Missing a little paint here and there. Good condition Posted with
Offered is a nice vintage Briggs& Stratton Model A Engine. I believe this is from the late 40s. item was bought at a local auction. It appears to have been restored. I t is nicely painted and looks to be in great condition. It does not have a gas tank but a small tube for running the en gine on a small a mount of fuel. I pulled her over about 5 time and she fire d right up. Sounds g reat. No smoke. This is really a nicely resto red original. Thanks for stopping by! Flat rate shipping in the lower 48- $ 99.99 International bidders ask for a shipping cost BEFORE you bid We are dedicated to 5 star service so i f you have any questions or concerns for any reason with your purchase.Please Email or call us at 714 364 7320 Garage Classics purchase agreement 1. WE A CCEPT PAYPAL 2. Most items ... moreare shipped UPS and USPS We are not responsible for international customs fee's We normally ship the next day after cleared payment but no more then 3 days. We ship monday through friday 3. California residents will be charged sales tax 4. Please ask ALL questions before you bid 5. We expect payment within 7 days We are a small family business(just my wife and I) We have been selling special interest items on Ebay for nearly 10 years and do our best to make things right for our customers. Though we can make mistakes, we are dedicated to 5 star service. So please email us with any concerns. Thank you! Liz& Craig We are a small family business(just my wife and I) We have been selling special interest items on Ebay for more then 10 years and do our best to make things right for our customers. Though we can make mistakes, we are dedicated to 5 star service. So please email us or call with any concerns. Thank you! Craig& Liz If for any reason you need to contact us please call 714 364 7320 Or you can email us. Thank you. Craig
I don't use the term very often but this is a very rare original sign advertising International Harvester Mogul Kerosene Tractors. It measures about 13 3/4 x 19 7/8 inches. It is stamped steel with raised letters and is 100% original. It has a few extra holes in it. A notch in the lower right corner, and some light scratches and creasing from it's years of service but still displays very proudly with great color. It was made by the Cross Press and Sign Company in Chicago. It came from a dealer in Hamlet, Indiana, many years ago. It would be a fantastic addition to your early IHC advertising collection especially if you have an early Mogul tractor! Certain elusive pieces like this rarely come up for sale and are usually traded between collectors without any public exposure and there's ... morea good chance that this is a once in a lifetime opportunity. There are only a few things that have escalated in value more than good original advertising signs in the past few years and the trend is likely to continue. An early IHC tractor sign recently sold here on Ebay for about $4500 so don't miss your chance on this one. It will likely be a long time before another one turns up and it probably won't be this nice. You won't be disappointed in any way. This will be shipped with a flat rate fee of $30 and that will include insurance. I can be reached at 262-573-1931 if you'd like to talk about it. The pictures really tell the story. Good Luck.
Here is what I believe is the remains of an antique 700A Clinton small gasoline engine that may have some salvageable parts including a good vintage gas engine muffler. This vintage engine is very rusty though crankshaft. Cam, valves, oil pump shaft and governor parts move freely. The numbers 2-13-47 are cast into the output pulley side and 3037 on the bottom pan of this collectible parts motor. Check out my! Be sure to add me to your!
KOHLER ENGINE 8 HP MODEL K-181. I DON'T KNOW MUCH ABOUT THIS ENGINE. BUT MY NEIGHBOR WHO DOES KNOW ENGINES SAYS IT'S RARE AND IT HAS GOOD COMPRESSION. PLEASE MESSAGE ME WITH ANY QUESTIONS. IT IS FOR SALE LOCALLY SO I DO RESERVE THE RIGHT TO END THE AUCTION. FREE SHIPPING TO LOWER 48 STATES.
This is a rarely seen air-cooled two cycle offering by the Associated Manufacturers Co. Of Waterloo, Iowa that is a pretty close copy of the far-more-common Maytag model 92 washing machine motor Although quite similar. This neat little engine deviates from the Maytag on a few points, most notably with the high mounted eternal gear driven magneto and the use of a ratcheting pulley and a leather strap(of which parents of that era seemed to have a limitless supply of) as a starter instead of a foot pedal. This engine has great compression and turns over nicely, the mag gears are in as new condition and it should run with some minor tinkering. In fact there is a nice 1:05 minute video of a similar engine running on youtube if you need further convincing you should get this engine. There is a crack ... morein the carburetor air horn(see pictures) But other than possibly making it run a tad lean, it shouldn’t be too big of a issue to either compensate for, or fix. Besides that minor flaw(or challenge… this engine is in great shape for its age. Which, I’m guessing falls somewhere within that Post-War/ Pre-Depression decade of 1920-1930. I’ve left this in nice little engine in“as found” condition. Normally I’d drag it down to the carwash and hose it and myself off but after the apparent recent discovery of that rare element known as“patina” Mixed in somewhere with all that dirt and grime, some folks nowadays want this stuff left untouched. All I know about it is that it saves me a few quarters and a good drenching so I’m glad to oblige. Either way, left as is or fully restored, this would be a great little engine for anyone fascinated by these tiny mechanical marvels, a fan of any and all Associated engines, or maybe even a Maytag collector as a study in contrasts and comparisons to show how the competition tried to horn in on the popularity of Maytag’s far more famous(and common) creation. I'll ship it. But be aware it weighs in just at the USPS's weight limit, so it'll cost you(always the actual shipping
I HAVE FOR SALE PROBABLY THE NEATEST PUMP I WILL EVER SEE IN MY LIFE. IT HAS NO MARKINGS ON IT AT ALL. IT REMINDS ME OF AN INVERTED BRUNNER OR PIERCE OR A WEBSTER. IT HAS A BRASS CONECTING ROD AND ALSO A BRASS PISTON OR SLEEVE. THE FLYWHEEL IS 9" X 1 1/2" THE ENTIRE UNIT STANDS 15" TALL. THIER ARE NO CRACKS. BREAKS OR WELDS FOUND ON THE PUMP. THIER IS ALSO A VERY ORNATE BRASS OILER OR GREASER ON THE ROD CAP. EVERYTHING IS LOOSE AND FREE JUST WAITING FOR A NEW PURPOSE IN LIFE. I KNOW HOW EXPENSIVE MODEL KITS ARE, AND THEN YOU ARE JUST LIKE ALL THE OTHER MODELS COMPLETED ONT THE TABLES. HERE IS A CHANCE TO DO SOMETHING DIFFERENT! IT'S TIME TO SHOWCASE YOUR ABILLITIES AND WOW THE CROWDS AT THE SHOWS WITH THIS PUMP TURNED INTO AN ENGINE. A TRUE NEAT PIECE! IF YOUHAVE ANY SHIPPING, ... morePAYMENT CONCERNS, OR WANNA PUT SOMETHING TOGETHER. CALL JUSTIN 920-210-3662 I WILL SHIP FASTENAL. PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I HAVE SELECTED THE LOCAL PICK-UP OPTION FOR THIS LISTING. I WILL SHIP THE ITEM. E-BAY HAS A HORRIBLE SHIPPING CALCULATOR FOR FREIGHT SHIPPING. I WOULD PREFER TO USE FASTENAL STORE TO STORE SHIPPING. A GENERAL RULE OF THUMB FOR PRICE WOULD BE SOMEWHERE BETWEEN $75-$150 DEPENDING ON THE DISTANCE YOU ARE FROM ME. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like La Sueur, Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is
ANTIQUE GAS ENGINE MOTOR ELGIN HAF-A- HORSE VERY UNCOMMON. WITH COIL. TURNS OVER WITH COMPRESSION. NO ATTEMPT TO RUN IT HAS TAKEN PLACE. CARB HAS COMPLETE PICK UP TUBE, OFTEN MISSING) GAS CAP IS HERE ALWAYS MISSING. NEEDS SPRING AND OIL ON KICK STARTER WHICH DOES WORK OTHERWISE. I HAVE SEEN A COUPLE COME AND GO ON EBAY, BUT NONE AS COMPLETE AS THIS ONE. THESE ARE HEAVY. I WILL CRATE IT TO PROTECT IT. IT WILL BE CLOSE TO 75 LBS PLEASE REMEMBER FED-EX ONLY GOES TO 70 LBS. TO A RESIDENCE, BUT THEY WILL GO TO 150 TO A BUSINESS. I CAN USE UPS, BUT THEY HAVE BROKEN SO MANY ITEMS FOR ME THAT WOULD NOT BE MY FIRST CHOICE. PLEASE ASK QUESTIONS ALLOWING ENOUGH TIME FOR ME TO GET BACK TO YOU. BECAUSE I GET QUITE BUSY. NO CRACKS. WELDS REPAIRS ANYWHERE ON THIS ENGINE, NO BROKEN COOLING FINS. IT IS BEING ... moreSOLD IN ITS PRESENT CONDITION, AS A NON RUNNING ENGINE THAT IS APPROACHING 100 YEARS OLD. I DO NOT HAVE THE MUFFLER. I will be wood crated for shipment.
Up for auction is a original International drain plug with P/N 3572D stamped on it. This is for the purist that wants everything original. These are hard to find as only older gas engines had them. Thank you for viewing my ebay item and happy bidding.
This bid is for a unusual small vintage gas engine. This came off a Monarch lawnmower. The back of the flywheel is marked R.E. Phelon Co. This is in good complete condition. The muffler has a repair patch. No damage anywhere. Nice fins on the head. No dents in the tank. This turns over with good compression. Winner pays UPS shipping.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f2696c234-0x103-
ANTIQUE DRIP OILER MFG. NY NATIONAL BRASS ROCHESTER N.Y. 1/8 N P T THE GLASS IS BROKEN BUT CAN BE REPLACED. I AM SELLING THIS AS IS NO RETURNS. I OFFER COMBINED SHIPPING AND LIST EVERYDAY. CHECK BACK OFTEN THANKS FOR STOPPING BYE.
Parts engine. Not sure what is all missing, came from esate, I can hold if you need time to pick up(2 months) Great old engine to restore or for garden art. ALL Offers considered
u get what u see. from eng model 494 0101 037 good& solid with surface rust. All items are described to the best of my ability. Please read all descriptions in entirety and review all photos before sending questions. Be sure the item/part is what you need. I cannot be held responsible for your purchase mistakes. Most items are sold with“No Returns. however, there is always the exception. If you have a problem with your item please contact me before filing negative feedback against me. All shipping fees are calculated based upon your zip code. I can no longer combine shipping on multiple items purchased from me. Most items shipped within 24 hours of payment received. If there is currently no Buy It Now price showing, we cannot offer one. Feedback will be left for buyer after the seller ... morefeedback is received. On Jun-14-13 at 20:15:39 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
This is an Original Cast Iron Carburetor Choke Elbow For The International Harvester. Or McCormick Deering 1 1/2- 2 1/2 Hp LA Or LB Type Hit& Miss/ Throttle Governed Gas Engines. This is the Almost Always Damaged Or Rusted Stuck Carb Choke Elbow Part# 5336-D It is In Good Original Condition. Everything Looks Good& Functions As it should. I see no Damage Or Repairs.Selling As IS. This Item Weighs 2 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to ... morecheck Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f4ceeabbb-0x107-
For sale. A 2.5hp Fairbanks Morse 1b-7 air cooled engine. The engine was manufactured by Onan for the Fairbanks Morse company. The engine is in really nice unrestored condition, Please please ask questions if you have any doubt of what you are bidding on thanx. local pickup is free. See video of this engine run at the engine is in madera. Ca 93638 we have a forklift to loat it. i will strap it to a pallet for free. you figure your shipping
Vtg Delco Hit/Miss Gas Engine Light Plant Wrench 93704 Cyl/Valve/Primer Plug Up for auction is an old wrench that was used on the Delco gas engines& light plants. It is a#93704 double box wrench. Marked CYLINDER& VALVE PLUG on one side. And PRIMER PLUG 93704 on the other. The markings are pretty clear& I do not see any cracks or repairs. It could use some cleaning. This is a pretty nice old wrench. And would be a good addition to your collection, for use or display. If you have any questions. Or would like additional pictures, please feel free to email me. I have other old tools up for sale this week. And gladly combine shipping. Please ask for a combined quote if there are more you are interested in. Thank you for looking. And have a great day. Ebay's new policy states that ... moreI can only accept Paypal unless the buyer of this item requests a different form of payment. I am open to these alternative requests. So if you do not use Paypal, rest assured that you can still bid on my items. All items are shipped by USPS Priority mail unless stated otherwise in the shipping options and will be shipped no later than 72 hrs from receipt of payment(items usually ship within 24 hrs) Due to Ebay's decision to start charging me and other sellers a percentage of the listed shipping costs. It is no longer feasible for me to ship international. I apologize for this, but with them taking more and bigger bites, the profit margin is getting pretty small. Please note that smaller. Heavier items are shipped Priority mail in a flat rate box. I gladly combine shipping. If you win more than one auction, and if your items all fit in one of these boxes, it will save you a good amount of money. Please email me to see if all the items you are interested in will fit, and if they do, it can save you some $$. Payment is due within 7 days. All items are sold guaranteed as described. Please contact me within 3 days of its arrival with any problems so that we can work together towards a solution. Please bid only if you intend to
Fairbanks Morris Hit and Miss Engine Turns over and has compression Last ran two years ago and has been stored in heated garage since. Should not take much to get it running. Pick UP Only
Here we have a WISCONSIN ENGINE 2 cylinder TJD motor complete No Reserve! Turns over. But we did not try to start. See Pic's Being offered for parts. Buyer responsible for Pick up or Shipping. Email your zip code for a shipping quote. Please email any questions you may have. Terms: By bidding you are entering in a legal contract to purchase this item. All items are to be paid in full within 3 days of the end of the auction. Non Paying bidders will be reported to ebay. Bidders with 0 Feedback are asked to please contact us prior to bidding or the bid may be cancelled. All items are sold as-is where-is.
Thought this was new old stock but appears seized. I don't know much about motors. Might be easy fix but consider it as selling for parts. Extra throttle etc as well.
Here is a Maytag engine that is not locked up. It cranked freely. I picked up at an estate sale. I have 5 more available Number 895038 is a twin cylinder engine. I am starting the bid out low. I dont know if it runs. Sold as is. Can pick up in northern wis or at Iola old car show.or can ship. I will refund any extra shipping cost as I just used an estimate.see my other auctions.
212cc Predator gas engine runs very good. Has a small dent in the gas tank by the fuel fill cap if you look at it just right. other than that the engine has no other cosmetic problems. In very good shape runs strong would make a good go kart mini bike tiller, pump, generator, engine, has low oil shut off, ohv, cast iron sleeve for longer life. shaft is 3/4" in diameter, 2.43" length, 3/16 keyway, and tapped for a bolt.shipped with no oil or fuel
International M left hand thread crankshaft greaser. Excellent condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f9f0c04c7-0x102-
Nice Vintage exhaust manifold for Briggs and Stratton model WMB engine. As pictured
This Novo engine needs a muffler and a buzz coil battery. Engie is free. Valves are stuck. They unscrew so it will be easy to fix them. Comes with manual. It is a 6 HP. This is a local pickup item. We are located in Nevada. Missouri which is about 90 miles south of Kansas City, MO on I-49. Please email with any questions. Thank you for looking.
VINTAGE LUNKENHEIMER GREASE OILER. BUYER PAYS 6.50 SHIPPING TO USA ADDRESS THANKS CHEVY BUICK OLDSMOBILE RAT ROD PONTIAC CHRYSLER DESOTO NASH STUDEBAKER HUDSON PLYMOUTH DODGE REO DIAMOND T MERCURY LINCOLN CADILLAC 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1946 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 WILL QUOTE INTERNATIONAL SHIPPING
~LARGE ANTIQUE BRASS OILER HIT MISS ENGINE 2 1/2" DIA Hello. Welcome to our Auction! From a recent estate. Still intact. The total length is about 4 3/4" Please keep in mind that most of our items are old and used and will show normal wear. Please look closely at the pictures and e-mail with any questions before you bid. Thank you for your interest. We strive for 100% customer satisfaction. If you are unhappy with your purchase. Please contact us before leaving negative feedback. You may also call us during normal business hours(eastern time) with any questions or concerns: 734-219-3612. Please note that because of our large sales volume. We may require up to 5 business days to ship your item. Please keep this in mind when you bid. Thank you for your interest in our auction. inkfrog ... moreterapeak. InkFrog Analytics.
This is a real nice and early Century"Invincible" open frame electric motor. According to the fancy brass serial tag it is 1/4 horsepower. 104 volts, and 1750 rpm. The last patent date is 1900 so it's pretty early. It is in excellent condition with no cracks, breaks, or repairs of any kind. It has an original type cloth cord on it. It has an excellent amount of original paint on it. I've tested it and it starts up and runs very nicely. It is quiet and very smooth. It has a cast iron mounting platform. The motor is about 7 inches in diameter and about 9 inches long overall. It would look great running an early electrically belt driven implement or would look just as nice displayed with the rest of your early electrical devices. These early period electrical items are getting ... moreharder to find every day so don't miss your chance on this one. The pictures tell the story. You won't be disappointed in any way. Good Luck.
Nice Galloway flywheel gov. Weights AB 12 is part# They are Rusty but not stuck move freely.
Maytag model 92 hit miss engine set up for shows. It has a cast iron horses head that shows exhaust smoke coming out of the nostrils. I used a red carper to give a better view of the smoke. But it is hard to capture on a digital camera. In real life it shows very well. I have taken this engine to several shows and it is a real crowd pleaser especially to the casual spectator. I have had people come up and remark on this engine while ignoring much more elaborate and valuable machines. Flywheel serial is 350723 which dates it to 1929. The engine is complete, starts easy and runs fine. Since this engine is not painted the standard color I will provide the paint specs. Ship to USA 48 states only.
Serial on flywheel is 161033X. Model is stated-as seen in pictures- is 72-D Please look closely at pictures.
Ottawa 5hp throttle governed log saw# TE29886 Has new valve job. Original tank that has been sealed, runs on both needle valves, wood rails are original and in good shape. The engine runs good and everything works as it should. The mag bracket and one rocker has a old repair, no other cbw`s that i know of. The blade is straight but missing two teeth. Does not come with mag. Payment must be made within 5 days after end of auction, can store for 30 days. Any other questions feel free to ask. PICK UP ONLY.
Part of a collection from an estate. The motor is type RS. Frame M5, hp 1/6, Serial# AF11. Not sure if this works. It is sold as is. Pick up preferred, but will ship if needed. Buyer pays all shipping. We sell all our items as is, as found. Some items may need a good cleaning. Please email us, with any questions and check out our other items listed on ebay. We do combine shipping if we can pack safely together and if items sell the same day.
This is a bracket and a Webster magneto to mount on a 1¾ and a 2¼ hp Galloway gas engine. I put it in the vice and triped the mag with a screwdriver it and it provided a nice hot blue spark. The bracket looks like it has been used and the points look to have a lot of life left in them. This has the hard to find AMM magneto. I can ship this Priority mail for $12 flat rate Priority mail or deliver it for free to the Portland Indiana show. Anyway It's up for sale to the highest bidder. Thanks for looking and good luck! If you reside outside the U.S. I will have to wait and figure your shipping costs after the auction ends.
This is a bracket to mount a Webster magneto to a 1¾ to a 16 hp Galloway gas engine. I put it in the vice and triped the mag with a screwdriver it and it provided a nice hot blue spark. The bracket looks like it has been rebuilt and the points look to be new. I can ship this Priority mail for $12 flat rate Priority mail or deliver it for free to the Portland Indiana show. Anyway It's up for sale to the highest bidder. Thanks for looking and good luck! If you reside outside the U.S. I will have to wait and figure your shipping costs after the auction ends.
sold as is came in box of parts with engine with busted flywheel untested points condenser and mounting screws and spring.buyer pays shipping as always starts at.99 cents and goes to the highest bidder SORRY NO INTERNATIONAL SHIPPING
in great condition I stripped and repainted is not banged up buyer pay S/H NO INTERNATIONAL SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fd1f0dd49-0x103-
Chrysler Power Bee West Bend 5800 Engine. Engine has a rope start that does not return and engine is stuck from sitting. Carburator throttle action is good with choke. The gear end clutch looks good with little wear.
Hit& Miss template For Sale McCormick Deering International Mogul 4HP Hit& Miss or Throttle Govern Engine Up for auction to the highest or fastest bidder is a very hard to find International 6 HP Stationary Flywheel Engine. We originally thought it was around a 4 HP but someone who knows these engines identified it as a 6 HP so we are going with that for now unless someone else tells us different- thank you. We are also told this is a Throttle Governed engine not a hit and Miss engine. The engine is loose and everything shown in the pictures go with it. The are no cracks or welds seen. We have has several people identify it as a McCormick Deering model M 6hp Throttle governed stationary motor. We want to thank everybody who helped us with this. This would be a fun engine to restore ... moreand show. The engine is being brought into the into the U.S. in about 60 to 90 days from Argentina where it was shipped many years ago which makes it even more rare. We will take a refundable 10% deposit from the winning bidder and balance when it arrives safely in the U.S. at which time we can get you pictures of it where the container is unloaded in Kokomo. IN. If it does not arrive in the U.S. exactly as shown you do have to take it and will get a full deposit refund. It is believed to be a 6hp but it's missing it's serial tag from what we can tell. It has no visible cracks or welds that we can see. Background: A hit-and-miss engine is a type of four-stroke internal combustion engine that was conceived in the late 1800s and was produced by various companies from the 1890s through approximately the 1930s. The name comes from the method of speed control that is implemented on these engines(as opposed to the"throttle governed" method of speed control) The sound made when the engine is running is a distinctive"POP whoosh whoosh whoosh whoosh POP" as the engine fires and then coasts until the speed decreases and needs to fire again to maintain its average speed. Hit-and-miss engines were made by a mult
Here is a nice commutator with a good"barn Fresh" look. There are no cracks or breaks on it. It shows its age, but isn't all splitting up and not all chewed up from the adjustment screw. Since we sell mostly vintage items. Most are not perfect and have defects, please ask questions if you have any. If we misrepresent any item we sell, we will refund your money, so bid with confidence We combine shipping on anything we can safely pack together. Please check out our other items and thanks for looking.
Here is a nice E carburetor. It has a new seat installed in the air valve. Air valve has been ground and body(to block) has been trued. Check ball and seat(upper) are in good shape and there is a later model pickup tube installed on it. The threads for the pickup tube were stripped out, so a new piece was soldered into the lower body of the carb with new threads. The gaskets under the hex plugs are worn out, but can be sealed with sealer if so desired. Since we sell mostly vintage items. Most are not perfect and have defects, please ask questions if you have any. If we misrepresent any item we sell, we will refund your money, so bid with confidence. This will be shipped in a wooden crate to make sure it gets to you. Please check out our other items and thanks for looking.
Here is a nice flywheel with original patina. It looks as if there is no paint on it. But is a good"barn Fresh" look. There are no cracks or breaks on it with exception of a small chunk out of the hub. It will run with this piece missing, but will put strain on the rest, possibly breaking it off too. What I did was put a small piece of metal in the spot and then clamped it with a band(small radiator) clamp. I didn't run it for hours straight, but it didn't ever break or crack out any further. Serial number is 89285. Since we sell mostly vintage items. Most are not perfect and have defects, please ask questions if you have any. If we misrepresent any item we sell, we will refund your money, so bid with confidence. This will be shipped in a wooden crate to make sure it gets ... moreto you. Please check out our other items and thanks for looking.
John Deere Hit or Miss Flywheel engine from the 1920s. 1 1/2 hp. Was running in 1997 and has been garaged since. On wood runners. Comes with 4 wheels to build a truck with. Pick up in Higganum CT(central CT) Email us with questions.
This is an Original 12" Pulley& Bolts. For The Fairbanks Morse Hit& Miss. Or Throttle Governed Gas Engines. I think This Would Be correct for All the Z Engines With the capibility Of Installing A pulley on A 3 bolt Pattern That Has 7 1/2" Spacing with Approx 7/16" Bolts. This is in good Condition. It Has Good Original Patina. With A Nice combination Of Grease, Rust, Paint It would be A good Candidate for A survivor engine that is missing one! I see NO Damage Or Repairs.Selling As IS. Nice Original Part Ready to Bolt On& Put To Work! This Item Weighs 12 LBS! I will Combine shipping. FREE SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't ... moreforget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
This is a nice vintage item offered in condition we recently acquired it in. Came out of inventory of an old machine shop warehouse we purchased. Oiler hole threads appear to be in good condition- please see all photos before bidding. Everything moves smoothly and freely. Previous owner said he had it sparking in the past. We have not tried. Tested, or used this item. PLEASE SEE OUR OTHER AUCTIONS- BOTH CURRENT AND FUTURE- FOR OTHER GREAT OLD VINTAGE ITEMS FROM THIS SAME OLD EARLY MACHINE SHOP INVENTORY. WE WILL BE OFFERING JOHN DEERE. CATEPILLAR, STEAM ENGINE, LOGGING, AND EARLY AUTOMOTIVE ITEMS. To Make Your Transaction Go Smoothly. Please Read the following Information Carefully. We strive to always try and provide excellent customer service. And ship rapidly. We will try and answer any ... morequestions about an items as soon as possible. When you purchase an item and make your Paypal payment. It will take about 3 to 4 business days for payments to clear our bank. Items are then shipped directly to you. We will pack your item carefully. With the end goal of it arriving safely. We strive to offer you a great buying experience. Before bidding… make sure you have read the description carefully. We describe condition of the items; markings. Dimensions, flaws, and other comments to help you understand what may not be seen in pictures; please use the zoom photo feature when looking at items. Ask questions: Always. Always, always do this if you are unsure about what you are bidding on or need to know ANYTHING about the item. We try our best to reply to messages as soon as possible. Shipping: Shipping costs on auction items are calculated along the basis of item weight and size. We try to ship most items using USPS Flat Rate boxes and USPS Insurance. We will offer to buyers tracking for any items. Especially those that are expensive and fragile. At this time we do not sell internationally. Items over $200 may require a delivery signature confirmation as proof of delivery. Combined Shipping: When multiple items can be pa
This is a 1934 briggs and straton 1/2 hp motor that does run well but it needs the correct tank. I just set this one one there to get it running and wont be included, excellent spark and nice comp, nice ID tag, there is a chip out of the head see pics, but does not effect the running, sold for parts/ restore or run as is 1934 may year model Y type 60102 serial# 68208 1/2 hp kick start thanks for looking and all questions are welcome. this will be sold as is and will be boxed well for safe shipping and will be sold to the lower 48 states only
I am offering a super nice Essex patent hot air engine. I have been told this a Buffalo engine. Sold out of Buffalo, New York. The engine is in super nice original condition. The engine is on a nice wooden base for display. These engine were used to power rotating store displays and dental equipment as I have been told. The engine runs really nice as I use sterno fuel available at Wal-Mart or any camping store. Engine measurements are 18" long,20" including base. Flywheel measures 6" in diameter. These engines are quite rare and highly collectable and very rarely come up for sale. Good luck and happy bidding.
This engine was originally mounted on a“Jacobsen Putting Green Mower” from the 1920’s. This unique old engine is almost complete. Missing only the easily fabricated two piece shroud to direct cooling air over its upright single cylinder. It has excellent compression, rolls over smoothly and the magneto is very hot-trust me and my still tingling palm on that! It comes with a copy of an original parts catalog/operator manual. Due to the heavy weight and the oversized/awkward dimensions of this engine assembly I will strip down the engine to its basic components to ship it(see pictures. And yes, I marked the timing gears so you can correctly re-align them upon reassembly) To get it within the weight limits set by the shipping companies, it will be sent in two boxes, one containing the basic engine ... moreand weighing 60 lbs, and the other with the base, gas tank/carburetor assembly, magneto and other smaller pieces weighing 40 lbs. Or you could just swing by and grab it some evening. If you don’t intend to pick this engine up here. Please see my rap below about shipping big stuff before bidding! SHIPPING COSTS ON HEAVY. OVERSIZE PACKAGES Shipping is becoming more and more expensive. As fuel cost rise. So does what it costs to send stuff via trucks across this country and around the world. The heavier the package the higher it costs to send-it’s just a fact of life. I ship stuff using UPS. USPS and FedEx and try as I might, they ALL want to charge money to use their services! To make matters even worse, Ebay’s shipping calculators are about 10 years behind on what the current going rate is to ship heavy, bulky stuff and are at best a wildly optimistic guesstimate of what it will actually cost. Given this exasperating situation. Here’s the formula I have devised to deal with shipping of heavy or large objects: You can use Ebay’s calculator. But only as a ROUGH ESTIMATE, I will need your address to give you an actual, accurate shipping cost. That way I can call the expediter and give them all the pertinent information(Wh
Here is a nice running 1931 Maytag mod. 92 for your consideration. This comes complete with air filter and muffler which are often found missing from these engines! I bought this from an old farmer back in Iowa who dug it out of his barn. It was pretty dirty[but running] when I got it and it took me a while to get it looking as it does now. It is a nice little engine to play around with and/or take it to the engine shows-put it in your trunk and off you go! Sorry to say that the cart that it sits on does not go with the engine. Please e-mail me any questions that you may have and I'll get back to you ASAP! Thanks for looking-hope you win! PLEASE PAY WITH IN 3 DAYS OF AUCTIONS END-THANK YOU# PLEASE NOTE THAT THIS IS BEING OFFERED ON OTHER SITES AND AUCTION MAY END AT ANY TIME UNLESS YOU ... moreBID-THANK YOU#
You are buying all of the following: 1) ONE 4 inch diameter stainless steel v belt pulley with two bearing inserts on the shaft 2) TWO 1.5 inch stainless steel drive wheels for mounting on the exterior of the shaft 3) ONE 5/8 inch(not stainless steel) v belt pulley for mounting on the electric motor shaft 4) ONE V belt(used) 5) ONE Stansew Universal Sewing Machine Motor 1120-120 volts AC& DC max Amps.9 NOTE that this motor has exposed wire on the cord and needs to be rewired. 6) ONE aluminum motor mount 7) ONE 3/8 flat aluminum plate with two grooves and screw holes for mounting the pulley 8) TWO 3/8 flat aluminum plates that fit incredibly smoothly into the grooves PLEASE NOTE that one set screw that tightens around the bearing was stripped and needs to be drilled out.
Economy 1 1/2 hp engine part push rod with mag trip Economy 1 1/2 hp part push rod with mag trip. USed. Most items ship the day you pay. Take time to look at all the photos You are feel free to ask questions. Some items may have a link to Youtube.Com Shipping is a estimation on some items. If it is over more then a few dollars you will get a refund on the difference Check out my other items! NOTE: Payment must be received within seven(7) days of your purchase. Unpaid purchases will be forfeited after seven days and a Non-Payer report will be filed with eBay to recover any listing and final value fees.
You are bidding on a wonderful VINTAGE STEAM POWERED STATIONARY ENGINE. This engine runs on live steam or even compressed air. This is part of a collection of many engines that I will list over the next month or so-if I can get them all purchased from the"OLD TIMER" who owns them) I watched this one work and it runs great and sounds awesome! It measures about 16" long 12" tall and 9" wide. The craftsmanship is superb and it just looks great! It sets and a thick wooden base. The engine weighs 30 pounds before packing for shipping. A wonderful VINTAGE STEAM ENGINE to add to your collection and ready to run on steam or compressed air. If you have any questions. Please contact me. Please check out my other listings. We buy a lot of households and get quite a bit of unique ... moreand rare items. I will do my best to keep shipping costs down on multiple items and will combine shipping when feasible. If you like what you see please add us to your favorite sellers list. Thanks folks!
Economy 1 1/2 hp engine part Speed gov. Economy 1 1/2 hp part speed gov. USed/LOOKS like a repaid was make by one of the holes-see last two pic. Most items ship the day you pay. Take time to look at all the photos You are feel free to ask questions. Some items may have a link to Youtube.Com Shipping is a estimation on some items. If it is over more then a few dollars you will get a refund on the difference Check out my other items! NOTE: Payment must be received within seven(7) days of your purchase. Unpaid purchases will be forfeited after seven days and a Non-Payer report will be filed with eBay to recover any listing and final value fees.
Hard to find variety Associated Engine crank handle. This one has a spring loaded dog that engages the key groove in the crank. See the part number cast into the handle. This fits the 1.75HP Chore Boy and 2.25HP Hired Man engines with 1 3/8" Dia crank. Any questions. Please Ask! Shipping is 3Lbs Priority Shipping
I have a bunch of old auto parts signs and some shelves for sale I took a bunch of pics of them and will sell individual or together just let me know which one u would like.u can message me on here or at sarah.richardson97@yahoo.com Ask about prices. Buy pays shipping may vary. Posted with
CashMoline@hotmail.com eBay Listing Orul Stationary early 1900's 6 HP loose engine Engine is loose All parts are in the pictures Orul Stationary early 1900's This is a very rare early Orul engine. From what we know we believe that it has most or all of the parts. We have done our best to picture everything(limited to 12 pictures) However, if you would like more pictures and have any questions do not hesitate to contact us. I have pictured above a restored Orul engine that is very similar to ours as a reference. This has potential to be a great project to restore! We were told that Orul and Deutz had a partnership a long time ago. Other than that we have not found much information on Orul. What makes this engine even more rare is the fact that it currently residing in Argentina now. ... moreWhere it was shipped to maybe 100 years ago. The engine is being shipped into the U.S. in about 60 to 90 days. We will take a refundable 10% deposit from the winning bidder and balance when it arives safely in the U.S. at which time we can get pictures of it when the container is unloaded in Kokomo IN. That is in central Indiana which is about 60 miles north of Indianapolis IN. If it does not arrive in the U.S. as shown in the pictures you do not have to take it and will get a your full deposit refunded. We can help with a shipping quote from Indiana too if needed, at probably $200- $500 in the U.S. depending on how far away you are from there. If you are an International buyer. Contact us and we can get it shipped to most International countries for a little more than it will cost us to ship to it to the United States. We'll guarantee anything else you want to know about this Orul so just ask and we are selling it at this great price as shown and described. Plus we 100% Guarantee this will be as described and shown on pickup or delivery. See our perfect feedback on over 500+ transactions as a happy buyer is all we insist on! Best of luck bidding! Engine will be able to be picked or looked at just north of friendly Kokomo.
Antique 4 cylinder boat engine and transmission. Got this from a local machine shop for a spare for my boat but turns out the casting is a little different so won't bolt into my boat without some changes. They said it ran several years ago when previous owners boat was repowered. When I removed the air cleaner and sprayed a little starting fluid in it coughed when cranked over. Fuel lines. Tank,and filter should to be cleaned before running gas through. Hand crank, no starter or generator. Has a magneto for the spark plugs. Self-contained cooling system, doesn't use river water for cooling. Honeycomb radiator still has antifreeze in it. Stromberg carb on it and probably needs new gaskets but they're really simple to overhaul. Very cool housing for this engine. The only thing missing ... morethat I could find is a drain plug on the bottom of the carburetor. There is an inline fuel filter between the stock filter/bowl and carb that looks to be a newer addition to this engine. This is same engine used in some tractors and military generators. Buyer to arrange all shipping. I will build shipping crate for cost of materials and can take to freight terminal for $0.80/mile(one-way mileage not round trip) I can deliver within 150 miles of my house for $0.80/mile.
McCormick Deering m 1-1/2 main bearing shims. These are old and original so sold as is. Thanks for looking and please check putt other auctions. Posted with
McCormick Deering m 1-1/2 hp gas tank vent pipe. This item is old and original so sold as is. Thanks for looking and please check out my other auctions. Posted with
Antique 1926 BRIGGS& STRATTON FH Overhead Valve Engine- Primitive Generator Description Antique 1926 BRIGGS& STRATTON FH Overhead Valve Engine- Primitive Generator Estate Sale Find! One of a kind primitive generator Built on a Oak two man wheeled cart Engine is free with good compression. Drained gas and put in high octane gas, engine turned over twice, but after tinkering did not start again. Did not change sparkplug. Was told the engine had not been started for over 40 years. The oak cart contains the 1926 Briggs& Stratton FH(serial#3022) Also has an old Delco Remy Alternator Model 94CJ, NorthEast Electric Generator and a voltage regulator. Hooked up to vintage three outlet AC strip. Ingenius primitive generator that would be an outstanding addition to any collection. Can also ... morebe a working generator for next storm. I sell everything as found. Described and pictured PAYMENT. Please remit payment within 7 days of your purchase. We accept paypal. Please contact us if you have any questions. STORE. Be sure and check out all of our odd and unusual items. Over the coming months we will be adding thousands of new items including autographs. Sports memorabilia, old advertising items, and lots of odd and unusual items. Some will be new and some will be old. We provide the photographs as a precise visual description of the item. These photographs serve as an extension to our written description and would be as described. Care has been taken to provide these photographs and we make every effort to represent our items fairly and accurately however. We are not professionals. Stock-
This antique water pump was used for agricultural irrigation or rural fire service for farms. It has a two cylinder magneto start. Very old. Perfect honey comb radiator. Pump was restored 35 years ago. Was not used, but has sat in a barn since. The engine is free. Questions? 727-692-4207 Will not accept paypal. Must be cash. Cashier's check, or wire transfer. Funds must clear before pump is shipped. We will palletize and strap for your shipper. Sold"as is" no warranty implied or expressed.
Timing your engine clock came in a bunch of things I bought a few years back from C.H. Wendel. It is 9x10 and 1-¼” thick and is cast alum and made to hang on the wall. It has one AA battery in it and runs good.
You are bidding on an antique Ottawa Drag Saw Hit and Miss Engine. Made by the Ottawa Mfg Company. Ottawa Kansas. I found it at a NH estate sale tucked away in the back of a barn. The brass plate on the hopper reads"The Ottawa No: TE 27676, HP: 5, Speed: 550 RPM" Engine turns over nice and smooth. Has good compression. Still has the antique spark plug. All of the levers and controls work. Nothing is seized. Gas tank is n good shape. Hopper has no cracks or repairs that I can see. The machine is mounted on a moving dolly. It was probably mounted on this since new. There also is an electric box on one side of the engine. Plaque reads Wico Type EK. The oiler on the top of the engine still has oil in it. It is heavy but it moved nicely on the cart. The oiler is marked"The D.T. Williams ... moreValve Company No, 1" Comes with a large buzz saw attachment. It mounts right to the engine. The two fly wheels on either side measure 18" and 15" Approximate engine measurements, not including the cart are 24" wide. 34" deep. 24" tall. Approximate measurements with the cart are 93" long. 33: wide. The saw attachment id also in good condition and the blade measures 24" in diameter. Nice old antique hit and miss engine. Nice to find in the original unrestored condition. I would prefer local pick up or buyer can arrange their shipper to pick it up, you can try Uship. I do have a shipper who works with the east coast, so if you need a quote you can for a quote. No Reserve! Please email with any questions. I will be happy to answer them. As was the case with all products manufactured by Ottawa( Kan. Engine Co. The Ottawa drag saw was known for being both technologically innovative and versatile. A leading manufacturer of drag saws in the 1920s, Ottawa designed and manufactured uniquely smooth-running units with both water- and air-cooled engines. The 5 hp. 1-cylinder Ottawa log saw was powered by a 4-cycle gas engine with a top speed of 550 rpm and a single six-spoke flywheel. Th e Otta
Kohler PA-CH440-3031 4 Cycle. 14 HP, 3600 RPM, 7.7 Qt Gas Engine This is a Kohler 4 cycle type gas engine. The engine is 14 HP with an internal gear box and electronic ignition. It features an RPM of 3600. 7.7 Qt fuel tank, and a 1 inch shaft diameter. The orignal packaging for this item has oil on its bottom and holes punched in the side and bottom. The engine itself has a broken off section of its base as well as a crunched filter housing and one of the oil ports has its cap snapped off. We received it on its side and it looks like some of the oil has drained out into its box. We have no way to test this item. It is being sold AS-IS. See pictures for mroe details. Photos in the slideshow reflect actual photos of the items. The main image is typically a stock photo. Please contact us if you ... morehave any questions. Technical Specifications Item Gas Engine Type 4 Cycle HP 14 Gross Torque 19.8 lb.ft. Engine RPM 3600 Shaft Orientation Horizontal Fuel Tank Capacity(Qt. 7.7 Starter Type Recoil/Electric Ignition Type Electronic Low Oil Shut Down Yes Cylinders 1 Gear Box Internal Bearings Dual Ball Muffler Yes Air Cleaner Type Quad Clean 4 Stage Cyclonic Air Filter Yes Rotation Ccw At PTO End Application Aerator. Dethatchers, Fogger, Sweeper, Pressure Washers, Chipper Shredder Logsplitter Overall Height(In. 17.4 Overall Width(In. 17.8 Overall Depth(In. 15 Shaft Length(In. 3.49 Shaft Height(In. 5.26 Shaft Dia. In. 1 Shaft Configuration Drill and Tapped 1.1" Deep x 3/8-24 UNF Series Command Pro Maintenance Frequency Change Oil Every 50 Hours Features Large Metal Fuel Tank. Qaud Clean Filttration System, Design OHV Agency Compliance CARB Please view all the pictures before bidding. The pictures are your best insurance to prevent hassles when attempting to return items. Shipping Weight: 105 lbs, The shipping option you are presented for this item was chosen based on appropriate options(weight. Box dimensions, contents) However, we always reserve the right to choose the method that best suits our needs, even
HI I have up for auction A REAL NICE TWIN CYLINDER MAYTAG MODEL 72. THIS ENGINE HAS BEEN GOON THROUGHT FROM TOP TO BOTTOM STARTS EASY AND RUNS GREAT. This Maytag has a new coil. New paint, and new decals and comes with the oak skids you see in pictures. This Maytag is show ready. No cracks or chips and nice and clean. This engine will be shiped in a wood crate. You don’t see these come up for sale very often so don’t miss out. Please check out pictures. I will try and answer any questions you might have. I ONLY SHIP TO A USA ADDRESS ONLY NO INTERNATIONAL SHIPPING OR ALASKA OR HAWAIL. Thanks for looking.
American Bosch Magneto or Generator Magnet Charger. The bottom terminals are marked left side Negative for the Battery and Right Side is Positive,I have never connected a Battery to it,the paper cover over the wires is what is coming off of it the wires appear to be wrapped good still,also the bottom board needs replaced its cracked across it towards the front,this Charger weighs approximately 185 pounds,It's Heavy!I could possibly have this delivered to Portland Indiana Engine show next month,also I am aproximate on shipping,I charge what the shipper charges me.please ask questions
This Clinton Panther engine has great compression. I just got it this afternoon along with the other one I have listed haven't tried to start its a v intage 2 Stroke Clinton Panther 21/2 hp Model A400-1141. Horizontal Engine, all letters and original no dings or dents some small old age wear marks missing the outer half of the muffler, 21/4X5/8 Crank, no rust in fuel tank, good old hard to find collectable engine, All Fluids will be Drained.
here is a nice vintage usaco air pump model sa in good working pump we can ship this with the utmost care any more info needed call 585 690 1534;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ff5a0e54f-0x106-
THIS AUCTION IS FOR A VERY OLD ORCHARD SPRAYER IT HAS A CUSHMAN HIT MISS ENGINE THAT READS CUSHMAN MOTOR WORK LINCOLN NEBRASKA MODEL C HP4 ENGINE NO. 40981 PANTENT 1914 OR 17 NOT FOR SURE HAYS PUMP AND MOTOR PAT SEPT 1919 MOTOR AND PUMP TURN FREE LOCAL PICKUP LISTING FOR MY DAD HIS NO. IS 217 440 4277 PLEASE NO PAYPAL CK OR MO OR CASH ON PICKUP IF WITHIN 10 DAYS
This is a cast brass name/ builders plate from a Monarch steam engine. Built by H. N. Strait Mfg. Co. Kansas City, U.S.A. Size 36 X 36 No. 5181. The plate measures 6" wide X 3" high X 3/16" thick. Heavy cast brass. Lots of info. on internet. Any questions please email.
Wisconsin rope starter pulley gas engine AEN. AENL, AENLD used good condition Priority mail used
Running Maytag Model 72-D(A? SN-970772 from late November 1941. I believe. Missing a few bolts in pics. But I put some in. Good compression. Strong spark. I only ran for 30 seconds or so, after a little fiddling. Smooth. Exactly as pictured. I can supply more detail pics or descriptions to serious bidders. Ask any questions BEFORE bidding. I'll pack it up securely and ship within a day or two of payment. PayPal is easiest. But for the old-timers, a check, money order or rolled Buffalo Nickels is fine, if you let me know first. Questions through the eBay message system are best. But you might catch me on the phone. 810-964-1665 9-6 Eastern
Ten grease cups that need cleaned. One is marked IHI. There are also four machine oilers. One oiler has no name. One is a Lunkenheimer Pioneer# 1 1/2. One is a Powell Pilgrim and the other is an Essex. The glass looks to be in good condition. US sales only. Thanks for looking and good luck bidding. I will combine shipping when its to your advantage.
HAVE A LOOK AT OUR OTHER AUCTIONS.WE COMBINE SHIPPING. HERCULES FUEL FILLER ORIGINAL PART IT'S OFF A 1 1/2 OR 3 HP ENGINE SURE IT FITS THE LARGER ONES AS WELL LID OPEN NICE NICE TREADS NO CBW'S THE FASTER YOUR P AYMENT THE FASTER YOU GET YOUR PARTS! HAVE A GOOD LOOK AT THE PICTURE WE SHIP CANADA POST AS IT IS THE MOST ECONOMICAL WAY TO SHIP FROM CANADA, THE PRICE QUOTED IS THE HIGHEST IT WILL BE WITHIN CANADA AND THE USA. WE WILL CHARGE YOU LESS. IF IT COSTS US LESS: INTERNATIONAL BUYERS. PLEASE CONTACT FOR A QUOTE. PAYPAL ONLY PLEASE. THE FASTER YOU PAY THE FASTER WE SHIP. PLEASE SEE OUR OTHER AUCTIONS.
For auction is an ignition system for a vintage Clinton engine. It had fire when removed from the engine but the outside of the coil does not look the best. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. I will combine shipping whenever possible to try and save money. Many of the items I sell are vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) ... moreThanks for looking and please check out my other auctions. Thanks. I am currently traveling a lot for work so I am mostly shipping on the weekends. I will try to ship your item as soon as possible but it may not go out until Saturday or Monday depending on my schedule. If you have any problems with your purchase please contact me through ebay. Thanks.
This auction is for an Associated 3/4 HP horizontal air cooled gasoline engine with a single 2 1/2 inch diameter flywheel. 3 step belt pulley, gear driven high tension magneto, mixing valve type carburetor mounted on a cast fuel tank with a brass makers tag. Tag states"Associated Manufacturing Company Waterloo, IA serial#14408. Two cycle design. Overall height to top of flywheel is 12 1/2 inches. This is a very desirable size motor easy to transport to shows etc. quite a rare model. I don't know if it's inspired by Maytag or vice versa but except for the magneto they are very similar. This engine, although dirty, is very complete and has not taken any weather. It does have magneto damage as shown in the photo but has good compression and should be made into a running motor fairly ... moreeasily. Once again, it is a rare motor and quite worth the trouble. I really don't want to ship it as it is quite heavy at 70+ pounds. I could supply you with a business address for pickup if you want to make all the arrangements. Figure about 75 pounds. I am going to the Amherst New Hampshire swap meet on the 28th of July. I would be happy to bring it with me there if it would help anyone out. It is about 2 hours from my home. Please ask questions before you bid. No reserve auction. Priced to sell, bid to own. Good luck.
u get what u see from npr6 eng. had good spark when removed just a couple weeks ago. All items are described to the best of my ability. Please read all descriptions in entirety and review all photos before sending questions. Be sure the item/part is what you need. I cannot be held responsible for your purchase mistakes. Most items are sold with“No Returns. however, there is always the exception. If you have a problem with your item please contact me before filing negative feedback against me. All shipping fees are calculated based upon your zip code. I can no longer combine shipping on multiple items purchased from me. Most items shipped within 24 hours of payment received. If there is currently no Buy It Now price showing, we cannot offer one. Feedback will be left for buyer after the seller ... morefeedback is received. On Jul-21-13 at 11:29:21 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
HI I have up for auction A REAL NICE BRIGGS& STRATTON MODEL 8 SERIAL NO. 252458. I BELIEVE THESE ENGINES WERE MADE BETWEEN 1948 AND 1954? Has real good compression. This engine is all original every thing you see this engine was born with. They are no replacements parts. Carburetor. Air breather, muffler, rope pulley, gas tank are all original on this engine. This Briggs& Stratton starts easy and runs great. It does not smoke or make any kind of noise when running. Only the gas tank and shroud have been repainted. You don’t see these come up for sale very often so don’t miss out. Please check out pictures. I will try and answer any questions you might have. I ONLY SHIP TO A USA ADDRESS ONLY NO INTERNATIONAL SHIPPING OR ALASKA OR HAWAIL. Thanks for looking.
Just bought from an 1880's ranch auction in Montana. In my opinion this engine should be left in the original condition. It is just too nice to be restored. More photos will be added when it is unpacked by Tuesday. Turns nicely and I believe the original decal is visible. To the shipping. I will put one dollar in the box. It will not move anywhere for this amount. When I know the buyers location I will figure the shipping and send the invoice.
Nice vintage briggs gas engine;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14004afdc77-0x107-
Goose Neck variety Associated Engine Ignitor Trip. This is the later style trip. See the part number cast into the front GDD. This fits the 1.75HP Chore Boy and 2.25HP Hired Man engines with 1 3/8" Dia crank. Any questions. Please Ask! Shipping is 1Lbs Priority Shipping
Here are 12 assorted size grease cups. 2 of them are even brass ones. They came from an estate auction. We have other grease cups listed at this time and can combine shipping. They are used and sold as is. Items must be paid within 7 days! Thanks for looking and check out our other items on Ebay.
Here is an original Farmall IHC cast iron cap grease cup. It has the early old IHC logo on the top. It also has part# S786 on the top. I have not tried to turn the cap off of the stem. It doesn't look rusty inside. We have other grease cups listed at this time also and can combine shipping. It is used and sold as is. Items must be paid within 7 days! Thanks for looking and check out our other items on Ebay.
THIS AUCTION IS FOR A VERY OLD WESTINGHOUSE POWER LIGHT UNIT WITH BUILT IN ENGINE MOTOR TURNS FREE I NO NOTHING ABOUT THESES WAS PICK UP AT A SALE I WILL BE LISTING 3 OF THESES ALL TOGETHER. LOCAL PICKUP LISTING FOR MY DAD HIS NO. IS 217 440 4277 PLEASE NO PAYPAL CK OR MO OR CASH ON PICKUP IF WITHIN 10 DAYS On Jul-19-13 at 16:36:14 PDT. Seller added the following information: ITEM IS IN LEWISTOWN MO 63452 NOT LAGRANGE THANKS 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-14007f555ad-0xf4-
I HAVE BEEN COLLECTING GOLD MINING MEMORABILIA AND RAILROAD EQUIPMENT FOR ALMOST 50 YEARS. I WILL BE LISTING A WIDE VARIETY OF RAILROAD AND MINING EQUIPMENT THAT I NO LONGER NEED. THE FOLLOWING ARE SOME OF THE ITEMS I WILL BE SELLING: RAILROAD SWITCH STANDS. 18” GAUGE PARK TRAIN FLAT CARS, MINE RAIL, ASSAY OFFICE ORE GRINDER. ORE CAR WHEELS AND AXLES, COMPRESSED AIR BITS, ORE BUCKET. ORE BIN WHEEL, MORTAR AND PESTLE, SINGLE AND DOUBLE JACKS. STAMP MILL SHOES, SPLICE BARS, AND OTHER MISCELLANEOUS GOLD MINING AND RAILROAD EQUIPMENT. I WILL ALSO SOON BE LISTING THE CONTENTS OF A 2.000 SQUARE FOOT HO MODEL TRAIN DISPLAY INCLUDING OVER 150 LARGE SCRATCH BUILT BUILDINGS AS WELL AS BRIDGES, TRAIN CARS, ETC. THE SCALE MODEL OF THE GOLDEN GATE BRIDGE IS 10’ LONG! DUE TO THE SIZE AND WEIGHT OF SOME ... moreOF THE ITEMS. THEY WILL BE LOCAL PICKUP ONLY. I LIVE IN ALTURAS. CA. APPROXIMATELY A THREE HOUR DRIVE TO THE FOLLOWING LARGER NEARBY COMMUNITIES: RENO, NV; REDDING, CA; AND MEDFORD, OR. I WOULD CONSIDER DELIVERING A LOAD OF ITEMS TO ONE OF THOSE THREE CITIES FOR $100 TO COVER FUEL COSTS. I CAN STORE THE ITEMS FOR UP TO 60 DAYS. BUT PAYMENT MUST BE RECEIVED WHEN THE AUCTION CLOSES. I HOPE TO GET ALL THE LARGER MINING AND RAILROAD ITEMS LISTED WITHIN A WEEK. THESE WILL BE TEN-DAY LISTINGS. IT ISN'T VERY OFTEN SUCH A LARGE AMOUNT OF UNUSUAL AND RARE MINING AND RAILROAD EQUIPMENT COMES UP FOR SALE. DON'T MISS THIS OPPORTUNITY TO OWN A PIECE OF THE HISTORY OF THE AMERICAN WEST! IF YOU NEED ADDITIONAL PHOTOS PLEASE EMAIL ME WITH YOUR REQUESTS. YOU ARE WELCOME TO MAKE ARRANGEMENTS WITH ME TO INSPECT ITEMS YOU ARE INTERESTED IN BIDDING ON PRIOR TO THE AUCTION CLOSING DATE. ON SMALL ITEMS THAT CAN BE MAILED I WILL GLADLY COMBINE ORDERS TO SAVE YOU MONEY ON SHIPPING. I DO NOT CHARGE ANY EXTRA FEES OR HANDLING CHARGES. AND I DO MY BEST TO CHARGE POSTAGE AS ACCURATELY AS POSSIBLE. I SHIP USPS PRIORITY OR FIRST CLASS MAIL ONLY. I STOPPED USING PARCEL POST BECAUSE IT ONLY SAVES A TINY AMOUNT AND DELIVERY TAKES SO LONG. I PREFER PayPal
This is a eclipse Hit Miss Engine or Mower Cover. I am not sure what this is. I did get this from a guy when I got my hit miss eclipse engine. He also said not sure if this goes with engine. Sold engine found cover so if you know what this is please let me know so I can post the information. Please look at pictures for detail. Please look at my other items for sale. I will combine shipping if I can. I use priority mail boxes so shipping is the same to California or next door. If any questions Please ask. Thanks Tom
This is a Briggs model 6s carb and tank. Looks like the same as a 5s or Model N. This came off a running motor. This has been sitting for a while might need adjusted or a kit when installed. Please look at pictures for detail. Please look at my other items for sale. I will combine shipping if I can. I use priority mail boxes so shipping is the same to California or next door. If any questions Please ask. Thanks Tom
I bought this at a tractor show many years ago for my sears suburban hh 100 tractor. The guy said it came off a wheel horse tractor but I can't remember what size engine this is for 8 or 10 hp? It seems to have the same bolt pattern as my hh100. I never used it but I have taken it apart and it all appears to be there and looks like it has a fresh rebuild. The bowl on bottom is dented so I am including another carb I had laying around that appears to have the same size bowl. These are both untested carbs! Please look at pictures for detail. Please look at my other items for sale. I will combine shipping if I can. I use priority mail boxes so shipping is the same to California or next door. If any questions Please ask. Thanks Tom
These are a bunch of Parts that came off a briggs FH I had sitting around. These are all untested! Please look at pictures for detail. Please look at my other items for sale. I will combine shipping if I can. I use priority mail boxes so shipping is the same to California or next door. If any questions Please ask. Thanks Tom o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-14010a7369f-0xf6-
These are buzz coils for a hit miss engine. I am not sure who made them but there are some lettering on one as seen in picture. I believe the one with the clips worked. I am selling these as untested though I believe I used the one with the clips before! Both appear to be in Nice condition. Please look at pictures for detail. Please look at my other items for sale. I will combine shipping if I can. I use priority mail boxes so shipping is the same to California or next door. If any questions Please ask. Thanks Tom
RUNNING LAUSON RSC-704 ENGINE WITH RARE REDUCTION GEAR STARTS EASY AND RUNS WELL HARD TO BELIEVE THIS DIRTY MOTOR RUNS WELL BUT IT DOES REDUCTION GEAR LEAKS OIL NEEDS REPLACEMENT GASKET WEIGHS 45.6 POUNDS SOLD AS IS WITH NO WARRANTY PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, ... morebe liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN LISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
ORIGINAL 1924 OLDS GAS HIT& MISS ENGINE Catalog TYPE A IN GOOD OVER ALL CONDITION COMPLETE WITH NO MISSING PAGES HAS SOME SLIGHT STAINING(SEE PHOTOS) NICE GRAPHICS AND INFO FOR THE VINTAGE ENGINES. FREE STANDARD USA MAIL SHIPPING IN CONT USA, BUYER PAYS ANY INSURANCE OR SPECIAL S&H IF REQUESTED.PLEASE PAY VIA PAYPAL WITHIN 2 DAYS OF AUCTION ENDING,PLEASE ASK ANY QUESTIONS ABOUT ITEM PRIOR TO BIDDING ALL SALES ARE FINAL THANK YOU.
Here is a used Marvel Schebler VH45 carburetor. I've been told these are used on some Wisconsin engines. It is loose and free. I don't see anything cracked or broken. It came from a repair shop auction. It is sold as a rebuilder core. It is sold as is. Items must be paid within 7 days! Thanks for looking and check out our other items on Ebay. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-14027ddb4df-0xf8-
Here are 2 mufflers for small engines like Briggs and Wisconsin. One is new and the other one if it was used it could not have been much. You get both for 1 price. They are sold as is. Items must be paid within 7 days! Thanks for looking and check out our other items on Ebay.