|
|
Order by: |
0 bids Free Shipping
Condition: New Location: , United States
Suitable for most standard drill bits, manual and electric drill bits, polishing accessories, etc. Feature: 1. The electric drill can be turned into a 90‑degree turn, which is convenient to operate in a small space.
0 bids Free Shipping
Condition: New Location: , United States
90° Right Angle: The 90° right angle can change the direction of the corner drill bit by 90 degrees, and can tighten the screws that are difficult to tighten normally. Application: The corner device is suitable for all 1/4in standard hex shank drill bits, which can be connected with electric drills or hand held wrenches, and can be stretched to a narrow space that is difficult to attain to tighten screws and nuts.
0 bids Free Shipping
Condition: New Location: , United States
Suitable for most standard drill bits, manual and electric drill bits, polishing accessories, etc. Feature: 1. The electric drill can be turned into a 90‑degree turn, which is convenient to operate in a small space.
Buy It Now
Free Shipping
Condition: New Location: , LK
Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. The tool’s quick-change magnetic chuck accepts standard 1/4 in.
Buy It Now
Free Shipping
Condition: New Location: Virginia Beach, United States
New never used.
0 bids Free Shipping
Condition: New Location: , United States
Feature: 1. Hex Shaft: Hex shank interface fits most drills, spindles and torsion wrenches and can tighten without general tools. Colour: Silver. Use: Suitable for most electric drills, cordless drills, hand spanners and drive chucks etc.
0 bids Free Shipping
Condition: New – Open box Location: Middlebury, United States
Co. in the United States. So why wait?.
Buy It Now
Free Shipping
Condition: New Location: Wesson, United States
Robust magnetism is projected through the unit to give users fastener retention, enhancing the overall user experience and functionality. from front to back and designed for performance and accessibility, allowing tighter access.
Buy It Now
Free Shipping
Condition: New Location: , United States
Application: The corner device is suitable for all 1/4in standard hex shank drill bits, which can be connected with electric drills or hand held wrenches, and can be stretched to a narrow space that is difficult to attain to tighten screws and nuts.
Buy It Now
Free Shipping
Condition: New Location: Prior Lake, United States
Compact, rugged Klutch® right-angle power drill attachment lets you drill small holes and drive screws in tight spaces with your electric drill. Die-cast gear housing and three sets of ball bearings provide smooth performance and durability. Magnetic 1/4in. hex socket accepts and holds standard 1/4in. drill and driver bits (sold separately). 1/4in. hex shaft fits most standard and quick-change chucks. Ergonomic handle for a firm, comfortable grip.
Buy It Now
Free Shipping
Condition: Used Location: Salem, United States
Vintage Sears Craftsman 9-1850 90 degree Angle Head Drill Attachment In BoxFREE USA SHIPPING SMOKE FREE HOME PLEASE CHECK PICTURES FOR CONDITION AND DETAILS
0 bids Free Shipping
Condition: Used Location: Traverse City, United States
Lightly used Vintage Sears Craftsman 9-1850 90 degree Angle Head Drill Attachment In original Box with adapter nut. There is minimal wear from normal use. See pictures for details, message with any questions.
Buy It Now
Free Shipping
Condition: Used Location: Chicago, United States
Vintage SEARS Craftsman 90 Degree Angle Drill Head Attachment W/Jacobs Chuck barely used coming with all necessary things to use it.
Buy It Now
Free Shipping
Condition: New Location: , United States
This right angle drill adapter fits in virtually any drill, air, electric, cordless etc. Can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids Free Shipping
Condition: New Location: , China
90 DEGREE TURN: The 90 degree round shank is bent at a right angle for hard to angles, making the drill power turn 90 degrees for hard to locations. STRONG AND HIGH TORSION: Right angle corner, key lock chuck, bring strong clamping force and high torsion.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. ABS Material: The shockwave right angle adapter is made of ABS and alloy steel, which is wear resistant and durable. Product Material: ABS, High Strength Alloy Steel. Easy Replaceable: Can be used with screwdrivers, hole saws, electric drills, socket wrenches, etc., and can be extended to narrow places.
0 bids Free Shipping
Condition: Used Location: Saint Louis, United States
Vintage Craftsman Right Angle Drill Attachment Tool Works - Missing Handle Bolt. Handle and driver only with packaging Bolt to hold handle missing Chuck key also missing See pics for exact item details Only selling what’s shown Any questions please ask Fast shipping Stock closet doorway 4
Buy It Now
Free Shipping
Condition: New Location: Long Beach, United States
Angle Adpter. High Impact Plastic Body. Lubricated Steel Greats with 1:1 Ratio. If you feel our S&H prices are too high, we can provide you weight the item's weight so that you can confirm the prices for yourself.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
(Item model number DWARA120. Included Components 1) DWARA120 Right angle adapter. Part Number DWARA120. Manufacturer DEWALT. Robust magnetism is projected through the unit to give users fastener retention, enhancing the overall user experience and functionality.
Buy It Now
Free Shipping
Condition: New Location: White City, United States
Milwaukee 2505-22 Right Angle Attachment. Condition is New. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: Used Location: Lubbock, United States
Every thing is in nice shape with wear. See pictures for details.
0 bids Free Shipping
Condition: New Location: , China
Description： Condition：Brand New & High Quality Material：Chrome vanadium alloy steel Color：Yellow Degree Angle:90° Dimension:Approx. 15.8cm x 3.5cm/6.16 x 1.36"(L * W) Hexagon Handle Diameter:Approx. 6.35mm ( 1/4") Package Included: 1 x 90 degree angle Drills Extension Shank.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. ABS Material: The shockwave right angle adapter is made of ABS and alloy steel, which is wear resistant and durable. Product Material: ABS, High Strength Alloy Steel. Easy Replaceable: Can be used with screwdrivers, hole saws, electric drills, socket wrenches, etc., and can be extended to narrow places.
Buy It Now
$8.60 Shipping
Condition: New Location: Roseburg, United States
Condition is New.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. Hex Shaft: Hex shank interface fits most drills, spindles and torsion wrenches and can tighten without general tools. Colour: Silver. Use: Suitable for most electric drills, cordless drills, hand spanners and drive chucks etc.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. Function: This angle adapter is used to connect with electric drill or handheld wrench to tighten screws and nuts in tight spaces hard to touch. Stable and Durable: The right angle drill bit adapter is made of S2 alloy steel and ABS material, has high strength, good wear resistant, stable and durable.
Buy It Now
Free Shipping
Condition: New Location: Seguin, United States
Packaging is worn, bent and dust trapped underneath.
0 bids Free Shipping
Condition: Used Location: Waterloo, United States
Milescraft | Orbiter | Right Angle Drill Attachment.Shows typical signs of use and age, minor scratches and scuffs. Small chip out of the plastic where the locking tab goes, does not effect performance.Works as it should.Please look at pictures closely.
Buy It Now
Free Shipping
Condition: New Location: , LK
Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. The tool’s quick-change magnetic chuck accepts standard 1/4 in.
0 bids Free Shipping
Condition: New Location: , United States
Feature: 1. For Difficult To Spaces: The product can turn the power of the electric drill to 90°, suitable for special spaces that are difficult to. 0.8 ~ 10mm / 0.03 ~ 0.39in. 8mm / 0.3in. Maximum Speed: 1500RPM.
0 bids Free Shipping
Condition: New Location: , United States
Feature: 1. Hex Shaft: Hex shank interface fits most drills, spindles and torsion wrenches and can tighten without general tools. Colour: Silver. Use: Suitable for most electric drills, cordless drills, hand spanners and drive chucks etc.
Buy It Now
Free Shipping
Condition: New Location: , United States
Application: The corner device is suitable for all 1/4in standard hex shank drill bits, which can be connected with electric drills or hand held wrenches, and can be stretched to a narrow space that is difficult to attain to tighten screws and nuts.
Buy It Now
Free Shipping
Condition: New Location: , United States
【90 Degree Angle Drill】This 90-degree drill adapter can make drill power swerve 90°and get to hard-reached places. The right-angle drill adapter's chuck accepts standard 0.8mm-10mm drill bits. 【Easy to Use】Simple to install and convenient to operate, with a handle for stable usage.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
High impact plastic body. For right or left hand use. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
0 bids Free Shipping
Condition: New Location: Tacoma, United States
Item is new, but may have some scuffs from storage on the packaging
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. 6.35mm Hex Connector: This right angle drill adapter has a 6.35mm hex connector for most power tools, socket wrenches, screwdrivers and more. Angle: 90°. If you do not receive our reply within 48 hours, pls.
Buy It Now
Free Shipping
Condition: New Location: Saugerties, United States
Much less money than buying a right angle drill. 3/8"--24 THD.
0 bids Free Shipping
Condition: New Location: Clinton, United States
Vtg. 1972 Howard 2 Speed Angle Drive Drill Attachment No.904 USA Craftsman~Skill~Black and Decker and all others. FOR BUFFING SANDING DRILLING . FOR RIGHT ANGLE WORK.
Buy It Now
Free Shipping
Condition: Used Location: Miami, United States
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
NEW Item factory sealed. Check the pictures for details.
Buy It Now
Free Shipping
Condition: New Location: Tustin, United States
This DEWALT DWARA120 Right Angle Attachment is perfectly designed for those who require an impact ready tool. The model DWARA120 made by DEWALT is an ideal choice for professionals who want to enhance their work efficiency. This attachment fits into tight spaces and offers a comfortable grip for the user.The brand DEWALT is well-known for manufacturing high-quality tools and this attachment is another example of their expertise. The manufacturer has ensured that this model meets the highest standards of quality and durability. If you are looking for a reliable and efficient right angle attachment, the DEWALT DWARA120 is the perfect choice.
Buy It Now
Free Shipping
Condition: Used Location: Fort Wayne, United States
With a 90-degree angle, you can easily access tight spaces and corners, making it an essential tool for any DIY enthusiast or professional technician.
Buy It Now
Free Shipping
Condition: New Location: Lincoln Park, United States
This Milwaukee Shockwave Right Angle Drill Adapter with its 1.4 in. slim profile provides access into tight areas. You can use it in both drill drivers and impact drivers and works with all 1/4 in.
Buy It Now
Free Shipping
Condition: New Location: Clinton, United States
【90 Degree Angle Drill 】This 90-degree drill adapter can make drill power swerve 90°and get to hard-reached places. The right-angle drill adapter's chuck accepts standard 0.8mm-10mm drill bits. Make electric drill power swerve 90°for hard-reached places.
0 bids Free Shipping
Condition: Used Location: Mansfield, United States
Vintage SEARS Craftsman 90 Degree Angle Drill Head Attachment 9-26271 26271.THIS ITEM LOOK NEW SEE PICTURES FOR DETAILS.
Buy It Now
Free Shipping
Condition: New Location: San Bernardino, United States
★【Suit for】The 90 Degree Angle extension can be quickly changes for standard drill bits,drive chucks and wrenches, which can fit all electric drill and socket wrench. Quick and easy screwdriver bit change,more convenient to use.
Buy It Now
$8.79 Shipping
Condition: New Location: West Hartford, United States
Buy It Now
Free Shipping
Condition: New Location: Macungie, United States
Item is NEW. Corners on packaging are cracked. FREE Shipping!!Thx for looking!
Buy It Now
Free Shipping
Condition: Used Location: Toronto, United States
Vintage SEARS Craftsman 90 Degree Angle Drill Head Attachment
0 bids $10.20 Shipping
Condition: Used Location: Alexandria, United States
VINTAGE Sears Craftsman 9-1850 90 degree Angle Head attachment for 1/4" and 3/8" Drills. Includes box, but no instructions.
0 bids Free Shipping
Condition: New Location: , United States
Feature: 1. Hex Shaft: Hex shank interface fits most drills, spindles and torsion wrenches and can tighten without general tools. Colour: Silver. Use: Suitable for most electric drills, cordless drills, hand spanners and drive chucks etc.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. ABS Material: The shockwave right angle adapter is made of ABS and alloy steel, which is wear resistant and durable. Product Material: ABS, High Strength Alloy Steel. Easy Replaceable: Can be used with screwdrivers, hole saws, electric drills, socket wrenches, etc., and can be extended to narrow places.
Buy It Now
$10.00 Shipping
Condition: Used Location: Westerville, United States
These are military surplus tools and have markings on them.
Buy It Now
Free Shipping
Condition: New Location: Lexington, United States
Oubit 3/8" Right Angle Drill Adapter with Keyless Chuck, 90 Degree Electric Drill Extension for Tight Spaces. Durability and Portability: Crafted with premium-grade plastic, the drill adapter's lightweight chuck ensures easy transportation for on-the-go jobs.
0 bids Free Shipping
Condition: New Location: , LK
Compact design allows work in tight areasDurable all metal housing and steel gearsRated up to 235 in-lbs of torqueAccepts standard 1/4 in. hex shank bits
0 bids Free Shipping
Condition: Used Location: Jacksonville, United States
Milescraft Orbiter Right Angle Drill Attachment - Works Great.
Buy It Now
Free Shipping
Condition: New Location: Cumming, United States
Steel Drive w/ Ergonomic Handle.
0 bids Free Shipping
Condition: New Location: , China
90 DEGREE TURN: The 90 degree round shank is bent at a right angle for hard to angles, making the drill power turn 90 degrees for hard to locations. STRONG AND HIGH TORSION: Right angle corner, key lock chuck, bring strong clamping force and high torsion.
Buy It Now
$5.45 Shipping
Condition: New Location: Vanceboro, United States
Brand new, factory sealed DeWalt DWARA120 right angle 90* drill attachment. S24
|
|
|
|