|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： -Quick Changing Tool Post Piston Type 100 AXA -Swing Dia: 12" -Only takes a second to change tools -Rugged construction eliminates chatter and vibration -No time wasted with shims -Unlimited versatility -No tool post indexing necessary -No need to disturb basic setup Package Include： 1*AXA 250-100 Piston Tool Post Up To 12" CNC Swing Lathe Quick Change Holder W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Description: 1 Year Warranty Low cost,Highest cost performance Brand New & High Quality Durable and easy to install Wedge type tool posts are precision engineered to assure repetitive accuracy Wedge type tool posts have the Maximum rigidity to get the chatter free cutting No time wasted with shims All working parts hardened and precision ground Package include: 1Pcs 250-111 size 1Pcs 250-101 size 1Pcs 250-102 size 1Pcs 250-104 size 1Pcs 250-107 size 2Pcs 250-101XL size The wedge tool holder Set total 8 pcs .
0 bids Free Shipping
Condition: New Location: , China
LYREIGN tool box organizer feature stylish design and quality materials. With its earthquake-resistant and impact-resistant design, it effectively reduces the risk of accidents in the workplace and protects production lines and users.
0 bids Free Shipping
Condition: New Location: Chino, United States
It will be your ideal product for fast turning. Soft Handle: The round-headed handle is comfortable to hold, and does not hurt your hand. The eccentric shaft is driven by the handle to move the clamping block.
0 bids Free Shipping
Condition: New – Open box Location: Palmyra, United States
0 bids Free Shipping
Condition: New Location: Romulus, United States
QCTP MOUNT. LATHE TOOL MOUNT. LATHE TOOL HANGER. Set includes 4 pieces. TOOL MOUNT. Multiple holes allow you to attach to a variety of surfaces.Material is either ABS or PLA. Colors will vary.
0 bids Free Shipping
Condition: Used Location: Hurst, United States
Kennametal Bilz WE2 3/8" Quick Change Tapping Adapter Collet #T21019 M10 ANSI Germany
Buy It Now
Free Shipping
Condition: Used Location: Spring City, United States
The holders are BXA-104, BXA-2, and BXA7. All are in lightly used or new condition. The one holder is still in the wrapper. Has a blank T-nut on the bottom that can be machined to fit your lathe.
Buy It Now
$12.00 Shipping
Condition: Used Location: El Monte, United States
0 bids Free Shipping
Condition: New Location: Stratford, United States
0 bids Free Shipping
Condition: Used Location: Madison, United States
Good used condition.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specifics and features:251-000 (1PC) OXA Wedge Type Tool Post.250-001 (1PC) Turning & Tool Holder, use tool bit up to 1/2".250-002 (1PC) Boring, Turning & Facing Tool Holder, use tool bit up to 1/2".Wedge type tool post Have the Maximum rigidity to get the chatter free performance.Perfect for 7 × 10", 7 × 12", 7 × 14" mini lathe, Such as Enco, Grizzly , little Machine , Harbor Freight and many oversea made.Use a number of cutters, forming of artificial cutter library and can be replaced repeatedly folder.Can handle all kinds of angle workpieces.Tool holder with adjustment screw nut can adjust the tool height, easy to operate and shorten the loading time.A tool change takes only a few seconds.Quick chan.
Buy It Now
$8.50 Shipping
Condition: New Location: Huntington Beach, United States
Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations. All working parts precision ground and hardened. Includes No.1 Turning & Facing Holder (up to 1/2" tool capacity).
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification： Condition: New Material: steel Lathe Swing: Up to 8" Swing Dia: 8 inch 251-000 (1PC) OXA Wedge Type Tool Post. 250-001 (1PC) Turning & Tool Holder, use tool bit up to 1/2". 250-002 (1PC) Boring, Turning & Facing Tool Holder, use tool bit up to 1/2". Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Perfect for 7 × 10", 7 × 12", 7 × 14" mini lathe, Such as Enco, Grizzly , little Machine , Harbor Freight and many oversea made. Feature:.
0 bids Free Shipping
Condition: New Location: Chino, United States
It will be your ideal product for fast turning. Soft Handle: The round-headed handle is comfortable to hold, and does not hurt your hand. The eccentric shaft is driven by the handle to move the clamping block.
0 bids Free Shipping
Condition: New Location: Jamaica, United States
Situated at the industrial hub of India we specialize in providing complete tooling solutions. Our Advice :Check with ACTOOLS before you buy from anywhere else. 5 Pcs Set T51 Quick Change:-.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits up to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
Buy It Now
Free Shipping
Condition: Used Location: Covina, United States
Quick Change Series: D25AXA. Made by Dorian Tool. Shank: 1/2".
0 bids Free Shipping
Condition: Used Location: Houston, United States
13 to 18" Lathe Swing, 2-1/8" OAH, 3-1/2" OAL.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description This OXA tool holder is precision ground and hardened OXA 250-001 tool holder is completely sealed for maintenance free operation Quick change lathe tool post holder securely holds up to 1/2 inch square diameter tool bits Tool post holder use with OXA tool post 250-000. 6-8 inch swing Turning tool holder is made of hardened steel and precision grinding, with good rigidity and hardness Features.
Buy It Now
Free Shipping
Condition: New Location: Rosemead, United States
#2 Boring, Turning & Facing Holder. Boring, Turning & Facing Holder. Unit Dim L x W x H (in) Lathe Swing Efficient "V"Groove Design Securely Holds Round Shank Tools As Well As Square Bits 1/2" - 3/4".
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification?? Securely holds 1/4 - 5/8" square diameter tool bits Interchangeable with Dorian, Aloris, & Phase II BXA series tool posts. For use with BXA tool posts 250-200 or 250-222. 10-15" swing. Precision ground and hardened. Completely sealed for maintenance free operation Turning and facing tools can be locked together (saving time and labor when changing operations) We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Feature: The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service.
Buy It Now
$20.00 Shipping
Condition: New Location: Schaumburg, United States
Such As:South Bend 9" & 10",Atlas 6", 10" & 12",Delta 10" &11",Nardini TT1000 &TT1200 and Many Other Similar Size Imported Lathe. Whole set includes: (Total 10PC ). It's too big, Not Suitable for 7" x 8", 7' x 12", 7" x 14" or 7" x 16" mini lathe Made in China.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product introduction: High quality replacement parts. Brand new Lathe swing: Up to 12" Tool bit capacity: 3/16 - 1/2" Quick and easy to install. Securely holds 3/16 - 1/2" square diameter tool bits. Precision ground and hardened. Completely sealed for maintenance free operation. Maximum rigidity for chatter free performance. Turning and facing tools can be locked together (saving time and labor when changing operations) Interchangeable with Dorian, Aloris, & Phase II AXA series tool posts. Product adaptation model: Fit For a wide range of operations, from fine precise work to heavy duty cutting. .
Buy It Now
Free Shipping
Condition: New – Open box Location: Washington, United States
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Key Features: For use with OXA tool post 250-000. 6-8" swing. Holds 3/8" with bushing (1/2" diameter without bushing). Interchangeable with Dorian, Aloris, & Phase II OXA series mini tool posts. Grips bar with extreme rigidity; cuts smoothly without chatter. Equipped with a split bushing to accommodate a boring bar of smaller diameter. Precision ground and hardened. Completely sealed for maintenance free operation. Please check product compatibility carefully to ensure it is the product you need. So as not to waste your time and energy on return. .
Buy It Now
$8.50 Shipping
Condition: New Location: Huntington Beach, United States
14-20" swing. Efficient "v"groove design securely holds round shank tools as well as square square bits 1/2" - 1". Our part # ALL-47403.
Buy It Now
$5.00 Shipping
Condition: New Location: Schaumburg, United States
Perfect for Made in China 7 x 8", 7 x 10", 7 x 12", 7 x 14" or 7 x 16" Mini Lathe. Wedge Type. Wedge type have the Max. rigidity to get the chatter free performance. All working parts hardened and precision machined.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to the lathe center line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Package Including：.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature： Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to the lathe center line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package Included：.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Specifications Material: Steel Color: Black Process: Quench Packing Size: 13.5*13*8cm/5.3*5*3in Gross Weight: 1.85kg/4lb Net Weight: 1.5kg/3.3lb Package Included 1* 250-0000 Tool Post 1* 250-0001 Turning Tool Holder 1* 0250-0002 Boring Turning Tool Holder 1* 0250-0004 Heavy Duty Boring Bar Holder 1* 0250-0007 Parting Blade Tool Holder 1* 0250-0010 Knurling and Turning Tool Holder 1* Handle 1* Connector.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: BXA Size 250-222 Wedge Type Tool Post Tool Holders Set for Swing Dia 10 - 15". Suitable for lathe center height 0.7-2.2" (top compound surface to lathe center line). Interchangeable with Aloris, Dorian , Yuasa & Phase II Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes..
Buy It Now
$12.00 Shipping
Condition: New Location: Schaumburg, United States
Whole set includes one each of: (Total 6PC ). All working parts hardened and precision ground. 250-202 Boring,Turning Tool Holder, use square shank or round shank tool bits up to 5/8 ". 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： For use with Lathe Swing 6-12" Piston Type Or Wedge Type Tool Posts Sets Use tool bit 3/16"to 5/8" Hex Key Size: 1/8" Set Screw Thread Size: M8x19 Height adjustment screw allows to accommodate various center height of different lathe chuck Interchangeable With Aloris, Dorian , Yuasa & Phase II Features: It is precision engineered to assure repetitive accuracy Turning and facing tools can be locked in together All working parts hardened and precision ground Completely sealed for maintenance free operation Package including：.
Buy It Now
$18.00 Shipping
Condition: New Location: Schaumburg, United States
All working parts hardened and precision ground. 250-201 Turning & Facing Tool Holders, use square shank tool bits up to 5/8". 250- 204 Heavy Duty Boring Bar Holder, can use 3/4" and 1" two size shank boring bars.
Buy It Now
Free Shipping
Condition: Used Location: Caledonia, United States
Two-way adjustable rake for right or left hand turning with 5-degree cutting angle and positive stop. A unique design provides for many angular turning, contouring and chamfering operations.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product introduction: High quality replacement parts. Securely holds 1/4 - 5/8" square diameter tool bits. Interchangeable with Dorian, Aloris, & Phase II BXA series tool posts. Precision ground and hardened. Completely sealed for maintenance free operation. Turning and facing tools can be locked together (saving time and labor when changing operations). Product adaptation model: Fit For use with BXA tool posts 250-200 or 250-222. 10-15" swing. Package: 1PC BXA #1 250-201 Quick Change Tool Post .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Brand new Lathe swing: Up to 12" Tool bit capacity: 3/16 - 1/2" Feature: Quick and easy to install. Securely holds 3/16 - 1/2" square diameter tool bits. Precision ground and hardened. Completely sealed for maintenance free operation. Maximum rigidity for chatter free performance. Turning and facing tools can be locked together (saving time and labor when changing operations) Interchangeable with Dorian, Aloris, & Phase II AXA series tool posts. Suitable for a wide range of operations, from fine precise work to heavy duty cutting. Package included: 1Pcs AXA #1 Turning & Facing Tool Holder 250-101.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature： Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure repeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specifications Material: Steel Color: Black Process: Quench Packing Size: 13.5*13*8cm/5.3*5*3in Gross Weight: 1.85kg/4lb Net Weight: 1.5kg/3.3lb Package Included 1* 250-0000 Tool Post 1* 250-0001 Turning Tool Holder 1* 0250-0002 Boring Turning Tool Holder 1* 0250-0004 Heavy Duty Boring Bar Holder 1* 0250-0007 Parting Blade Tool Holder 1* 0250-0010 Knurling and Turning Tool Holder 1* Handle 1* Connector.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： -Quick Change Turning And Facing Lathes Tool Post Holder -Use For Lathe Swing 10-15" Piston Type Or Wedge Type Tool Posts Sets -250-201 T Oversize Turning Tool Holders, Use Tool Bit Up To 3/4" -Holder Provides Maximum Rigidity And Absence Of Vibration Prevents Breaking Blades! -Precision Ground And Hardened. Completely Sealed For Maintenance Free Operation Package Include： 4* BXA 250-201 T 3/4" Turning Tool Holder For 10-15" Lathe W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Quick Change Turning and Facing Lathes Tool Post Holder Use for lathe swing 10-15" piston Type or wedge type tool posts sets 250-201T Oversize Turning Tool Holders, use tool bit up to 3/4" Plenty of working positions for more tool holder. Adjust height of cutting edge easily and accurately. For manual and CNC-lathe. Holder provides maximum rigidity and absence of vibration prevents breaking blades! Precision ground and hardened. Completely sealed for maintenance free operation Turning and facing tools can be locked together (saving time and labor when changing operations) Package Included: 5Pcs 250-201T oversize 3/4" Turning Quick Change Tool Post Holder.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
10 Vernier hole for 1 degree indexing. Base ground parallel to spindle socket.
Buy It Now
Free Shipping
Condition: New Location: Rosemead, United States
Taper Hole Size.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits up to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims All working parts hardened and precision ground .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: #7 250-207 BXA Universal Parting Blade Tool Holder Model: 250-207 Material: Steel Lathe swing: 10-15" Blade height: 11/16" Features: Holder provides maximum rigidity and absence of vibration prevents breaking blades! For use with BXA tool posts 250-200 or 250-222. 10-15" swing. For use with 11/16" (or smaller) blades having parallel top and bottom edges. For bevel as well as T-cut blades. Completely sealed for maintenance free operation. Enables cut off close to chuck No vibration prevents blades from breaking Packaged Included:.
Buy It Now
Free Shipping
Condition: Used Location: Somonauk, United States
Universal engineering, quick switch series 300, prices for one. I have Morris Taper number one through 5. others are drill adapters JT 33, J 3.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
36pcs/set letter(A-Z plus &) & number figure(0-9) punch stamp 1/8" imageLength: 2-5/8"Made of Durable and hardened tool steel.Fitted in letter and figure durable plastic boxes.
0 bids Free Shipping
Condition: Used Location: Watsontown, United States
This FIMS Quick Change Tool Post Holder is the perfect solution for your toolholding needs. Designed to hold IMS-4-A and Boring Bar Holder, this tool post is compatible with a variety of applications. The quick change feature allows for easy tool post changes, making it a versatile option for any job. Crafted with high-quality materials, this tool post is built to last and provide reliable performance. Its durable construction ensures that it can withstand heavy use and provide secure tool holding. Whether you're in the metalworking industry or using it for manufacturing purposes, this tool post is a must-have for your tool collection.
Buy It Now
$11.50 Shipping
Condition: New Location: Saint Charles, United States
Certificate for each batch. WEDGE 202-947 0. WEDGE 202-9474(251-111). SET SCREW THREAD SIZE M8x19. WEDGE 202-947 1. WEDGE 202-9475(251-222). "V" groove holds 3/16-5/8" round shank boring bars and tools as well as 3/16-5/8" square tool bits.
2d 14h 27m 11s 0 bids
$250.00 Now
Free Shipping
Condition: Used Location: Clemson, United States
On newer charts, I believe this to be equivalent to a Model/Size C. That is a size for 400-700mm swing lathes.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Features: Condition: New Securely holds up to 1/2" square diameter tool bits. For use with OXA tool posts 250-000. 6-8" swing. Precision ground and hardened. Completely sealed for maintenance free operation. Turning and facing tools can be locked together (saving time and labor when changing operations). Interchangeable with Dorian, Aloris, & Phase II OXA series mini tool posts. Only takes a second to change tools. Rugged construction eliminates chatter and vibration. No time wasted with shims. Unlimited versatility. No tool post indexing necessary. No need to disturb basic setup. Package includes: As the picture shows. .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature： Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure repeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
Precision Mini Quick Change Aluminum Alloy Tool Post & Holders Set for Hobby Lathes.Mini Quick Change Tool Post Set for 7x10, 7x12, 7x14" Table/Hobby LathesKit includes:* Swing size: 7”* 1pc Tool post.* 1pc 3/8" boring holder.* 1pc cut off blade holder 1/2" capacity. * 2pcs turning & facing holder 1/4" - 1/2"* 2pcs mounting bolts M8 & M10.* 1pc 3/8" carbide grazed boring bar.* 1pc 3/32 x 1/2 x 4" HSS parting blade.* 2pcs cylinder parts for mounting tool post block on the lathe.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Buy It Now
Free Shipping
Condition: New Location: Saint Charles, United States
Certificate for each batch. LATHE SWING 13-18. Lathe Swing: 13" -18". 3/4" Retrofit GTN3 Cut-Off and Grooving Blades 202-9578. Made of high quality Alloy tool steel 40Gr which is forged and has longer life,not Aluminum.
Buy It Now
$5.00 Shipping
Condition: New Location: Schaumburg, United States
1PC 250-302XL Oversize Slot Boring and Turing Tool Holder, Can Use Square Bit Up To 1" and Round Shank Bit Up To 3/4". 2PC 250-301XL Oversize Slot Turning and Facing Tool Holder, Can Use Square Tool Bit Up To 1".
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
250-402 CA #2 Quick Change Turning Holder. 14-20" Swing. Use Tool Bit: 1/2~ to 1". Product Detail. Precision Ground And Hardened. Item#: 4735.
Buy It Now
Free Shipping
Condition: New Location: Mount Juliet, United States
This BXA #10 Knurling Turning & Facing Holder is a reliable tool for any machinist. It is designed to securely hold your tool in place while you are working on your project. The quick change tool post type ensures that you can easily change out your tool without having to worry about it slipping or moving around. Made for use in business and industrial settings, this tool is perfect for those in the CNC, metalworking, and manufacturing industries. It is also suitable for use in workholding and toolholding applications. With its durable construction and efficient design, this BXA #10 Knurling Turning & Facing Holder is a must-have for any machinist's tool collection.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description： Highest After-Sales Guarantee Low Cost,Highest Cost Performance Brand New & High Quality Durable And Easy To Install Specification： Quick Changing Tool Post Piston Type 100 AXA Swing Dia: 12" Only takes a second to change tools Rugged construction eliminates chatter and vibration No time wasted with shims Unlimited versatility No tool post indexing necessary No need to disturb basic setup Package Including: For Lathe 12" AXA Size 250-100 Piston Type Quick Change Tool Post Holder Notes：.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post Swing Dia 10 - 15" 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" .
|
|
|
|
Offering two(2) Tapmatic model NCROA tapping heads with 1" shanks. Sold"used. As is" o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e0ff08f21-0xfb-
|
|
|
This is a used Kingmann White Rapidaptor shank with an end mill unit on it. There are no writings on the end mil and I do not know what make and model it is.
|
|
|
Levin Quick Change Angled Tool Holder Part no. 0156-77(former part number 032) Good condition with minimal wear. Please ask questions.
|
|
KS200 Our internal inventory number on this product is 3L#H3-15C. We have SEVERAL lots of Universal Engineering Kwik Switch 200 holders on auction right now. MANY of them are in our store. So you can only see them by Clicking here. We're adding items daily. So keep checkin in. All purchases made MUST BE paid for within 10 business days of auction end! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a Universal Engineering Kwik Switch Holder. It is#80236(looks like thre is a D under number. See pic) with lock nut(Acura ... moreFlex 9400020) It uses Acura collets. I would rate as Good Condition. We have several sets of these 200 holders on auction, as well as individual pieces, so do not miss out on a nice package! Check photos below as there MAY be some discoloration/ oxidation from sitting on shelfs! Please check out our Feedback, we are straight shooters! NOTE* Top Bidder receives FREE standard ground whipping to lower 48 United States. International to pay $4.00 Handling charge PLUS Actual shipping cost. We accept Paypal or CC on Payments as well as other forms of certified funds and company checks(non certified checks held 10 business days for clearance) Good Luck& Good Bidding! OUR RETURN POLICY. We are a WHOLESALER of all types industrial equipment! Usually when you purchase items from us you will be getting anywhere from a 25% 50% discount from what fair market value would be from a used machinery dealer. We will gladly stand behind what we sell. But because of the LOW MARGINS we work with and extraordinary deals we pass on, we can not offer partial refunds on ANY SALES! We gladly offer a 30 day NO QUESTIONS ASKED return privilege. This is a 100% refund of your WINNING EBAY BID, you are responsible for any loading/ tr
|
|
|
Made in the U.S.A. by Aloris Tool Company This is a genuine Aloris BXA18 Multiple Tool Holder in Good condition. Specifications: Aloris BXA series tool holder#18 Lathe Swing 10"15" Comes as shown in pictures.
|
|
|
This is a 16 piece set of QC300. Balas Quik Switch tool holders in Excellent condition. Included are: 1) 3/8" 2) 1/2" 1) 5/8" 3) 3/4" 2) 1" 3) 1-1/4" 2) 4MT Morse taper holders 1) 3MT Morse taper holder 1) THTC-C4 No. 4-1/2" Tap Holder 16 pieces THTC-C4 Tap holder. 3 MT holders, 12 EM
|
|
|
IMPORT TYPE CXA QUICK CHANGE LATHE TOOL HOLDERS PHASE II? FITS ALORIS ETC.
|
|
MCCROSKY TOOL POST_E4 1/2_4 FOUR Way& ACCESSORY.SERIES 1267 CONDITION: USED AND IN VERY GOOD SHAPE. PICTURES) THIS ITEM WAS USED IN ITT TOOL ROOM. WELL MAINTAINED AND READY TO GO. REFUND GIVEN IF BREAKS DOWN WITHIN SPECIFIC TIME LIMIT. DETAILS: SERIES 1267 SIZE. E 4 1/2 S/N OR P/N: 008401-00 Mounting PLATE 2 3/16" X 2 5/8" ROTATING PLATE(PICTURES) CALL ZONDRE WITH QUESTIONS OR CONCERNS 260-440-4230 SEND EBAY MESSAGES AS WELL BOTTOM OF PAGE THANK YOU Do to recent changes in postage rates at both UPS& USPS our pricing has become outdated or simply wrong based on current standards or rules set by each organization. For this reason ONLY our shipping rates will be change upon each sale to reflect the iincrease we incur for each package shipped through UPS or USPS. We do apologize ... morefor any issue this may cause. But we have to make sure our prices for shipping are correct and that we dont lose out on each shipment moving forward. Thank You. GM 2ndProtocol.
|
|
|
Made in China by unknown manufacturer This is a Quick Change Tool Holder in Good condition. Holder# 250-304: Master Bar for Boring Bars Capacity: 1" boring bar. Features: Only a second to change tools. Rugged- No chatter or vibration. No time wasted with shims. Unlimited versatility Safe and simple to operate Speed your lathe operations up to 90% For fine precision work to heavy-duty cutting. Comes as shown in pictures.
|
|
|
YOU ARE BIDDING ON A ETM NMTB30 SHELL MILL HOLDER#SM 1.00 x 1.718 THIS TOOL IS IN GOOD CONDITION
|
|
|
Great for holding small electrodes up to 1/2 inch square
|
|
|
~7~ NMTB-30 QUICK CHANGE KENNAMETAL ENDMILL HOLDERS 3/16"1" BRIDGEPORT CNC, 7 NMTB-30 QUICK CHANGE ENDMILL HOLDERS 3/16. 3/8, 1/2, 5/8, 3/4, 2-1" ALL EXCELLENT OR NEW CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
~10~ NMTB-30 QUICK CHANGE KENNAMETAL ENDMILL HOLDERS 3/16"1" BRIDGEPORT CNC, 10 NMTB-30 QUICK CHANGE ENDMILL HOLDERS ALL IN EXCELLENT- NEW CONDITION. SIZES AS FOLLOWS 3/16. 1/4, 3/8, 1/2, 2-5/8, 3/4, 7/8, 2-1" QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $20.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
~6~ ERICKSON KENNAMETAL NMTB-40 ENDMILL HOLDERS 3/16"5/8" BRIDGEPORT PROTOTRACK, 6 NMTB-40 QUICK CHANGE ENDMILL HOLDERS 2-3/8" 2-1/2" 2-5/8" ALL VERY GOOD CONDITION. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
~4~ ERICKSON KENNAMETAL NMTB-40 ENDMILL HOLDERS 3/16"5/8" BRIDGEPORT PROTOTRACK, 4 NMTB-40 QUICK CHANGE ENDMILL HOLDERS 3/16. 3/8, 1/2, 5/8. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $0.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
~9~ ERICKSON KENNAMETAL NMTB-40 ENDMILL HOLDERS 3/16"7/8" BRIDGEPORT PROTOTRACK, 9 NMTB-40 ENDMILL HOLDERS ALL VERY GOOD TO EXCELLENT CONDITION. SIZES AS FOLLOWS 3/16. 3/8-2PCS, 1/2-2PCS, 5/8-2PCS, 3/4, 7/8. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $20.00 USPS Priority Mail® Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e52e528a7-0xfe-
|
|
|
~2~ NMTB-40 QUICK CHANGE ER-16 COLLET CHUCKS BRIDGEPORT PROTOTRACK, 2 NMTB-40 COLLET CHUCKS ER-16 VERY GOOD CONDITION. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE NMTB-40 QUICK CHANGE TOOL HOLDERS. QUESTIONS CALL MATT 845-691-4140* WE WILL COMBINE SHIPPING* Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Valenite Cut Off tool Insert holder Cartridge VDBA-188-218-LA new. Never used. You get the tool just as you see it in the pictures. Posted with
|
|
|
Search Titles and Descriptions Categories Policies Gallery KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET KDK TOOLS#KDK-119 QUICK CHANGE 5C COLLET BAR/ HOLDER + 3/4" HARDINGE COLLET We also have a KDK-105 Master Bar for Boring Bars on Auction! Please Check Our Store. Specifications Allows instant change to threading. Internal grooving, drilling! Quick change from center drilling to tapping. Assures the simplicity of KDK Preset Quick Change Tools to all 5C collet jobs! Includes Collet: 3/4" Item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
|
|
|
Universal Eng. 80142 3/8" End Mill Holder Kwik-Switch 100 Taper. Kwik-switch 100 taper.875"68" 1.44" long, end mill holder 0.375" with one setting screw, Overall length 2.634" Channel through, Used but in good. Complete, functional condition. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
KDK-153 Quick Change Tool Holder Manufacture: KDK(SOLD AS IS) Comes as pictured Used- In Great Condition Shipping Includes Handling and Postage to the 48 Contiguous States(Alaska and Hawaii Extra) TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may beoffered to the next highest bidder within 4 business days. Any balance not paidin full will result in an unpaid dispute being filed with eBay after 4 businessdays. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please callus at 626-444-0311 for instructions. Credit Cards Due to fees charged by credit card companies to process a merchantsale. We do NOT accept credit cards for eBay purchases EXCEPT for PayPal ... morepayments.You may pay with PayPal as you normally do however we will not accept direct credit card payments via phone, etc. Cashiers Checks We accept cashiers checks and company checks. There may be a 1-5business day delay to verify funds on any non-certified check. Please contactus in advance if you have questions so we may accommodate the delivery scheduleof your item accordingly. California State Sales Tax State Tax applies to all state residents and businesses unless youprovide proof of a resale certificate to us. Please Fax to 626-443-9588. Warranty Sterling Machinery offers a 30-day MDNA sanctioned warranty unlessotherwise stated in the description of the ad. Items that are described andadvertised‘AS-IS’ are NOT covered by this warranty and the buyer releasesSterling Machinery from any liability or claims related to such. Frequently Asked Questions Q: Can Sterling Machinery Help with the logistics of Machineryshipping. And Loading? A: Yes. We can arrange for your machine to be loaded. Shipped via flatbed, orcommon carrier. We have relationships with machinery riggers, machinery movers,and trucking services, all over the world. Call today to see how much shippingwill be for your machine! It might be cheaper than you t
|
|
|
Erickson Quick Change 30 Taper ER 40 Collet Chuck Tool Holders These are for use in a QC30 or NMTB spindle. If you are using NMTB with a drawbar or pull stud. The thread is M12. These toolholders were in service less than a week ago. I am changing my machine to an ATC which has 1/2" threads and uses a drawbar. So, I cannot use these toolholders anymore. They're for ER 40 collets.
|
|
|
4 Lufkin Adjustable Parallels Made in USA Nos. 915E 915D 915C 915B 915A All are in good usable condition. All have owner's marks. The 915B is not in the pics but it is included. Please ask question.
|
|
|
ALORIS DA Tool Post Set Includes: 1) Aloris DA Tool Post(2) Aloris DA1 Turning& Facing Holder(2) Aloris DA2 Boring. Turning& Facing Holder(1) Aloris DA4 Heavy Duty Boring Bar Holder(1) Aloris DA41 Heavy Duty Boring Bar Holder(3) Indexable Insert Tool Holders(1) H.S. 3/4" Sq. Tool Bit(Mfg. by Armstrong) New" Condition: Excellent Questions? call Metro Machine& Tool 732-650-0666
|
|
|
Welcome! Up for sale is a 3pc Lot of Weldon Quik-Switch End Mill Holders. This lot includes 1pc OH-2 3/8" 2pcs OH-5 3/4" Made in USA. Used in good condition. Feel free to email any questions! SCT1874.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e6e180535-0xfd-
|
|
|
SquareTrade © AP6.0 LOT C2278 CALL US AT 937-672-9876 FOR ANY QUESTIONS"FREE SHIPPING IN USA" WE ARE OFFERING A UNIVERSAL ENGINEERING KWIK SWITCH 200 3/8 SERIES COLLET CHUCK PART# 80235 ALSO COMES WITH(10)TEN ACURA FLEX 3/8" SERIES COLLETS. SIZES YOU GET RANGE BETWEEN 1/16. TO 3/8" NO SPECIFIC SIZES WE ALSO HAVE MORE KWIK SWITCH 200 TOOLING LISTED AND LISTING MORE. PLEASE TAKE A LOOK AT OUR OTHER ITEMS WE HAVE LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your favorites list!
|
|
Description Very Good used Mixed Kenmetal-Erickson Quick Change Tool Holders plus Erickson-Kenmetal double angle collets 2x Erickson quick change holders Erickson-Kenmetal Collet sizes are 2x 3/8" 2x 5/16" 2x 1/4" 2x 3/16" and 1/8" Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding ... moreShips within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. Internat
|
|
|
UNIVERSAL ENGINEERING KWIK SWITCH 200 COLLET CHUCK#80235
|
|
|
Aloris D A-8 Threading Holder retail $220+ THREADING HOLDER#8This universal threading holder comes with an interchangeable high speed threading blade which has two cutting edges. You may now reverse your spindle and cut athread without fear of hitting shoulders. Speeds your threading. Aloris P-4 HS 60 degree threading blade retail $52+ Threading Insert. Style P4, HSS Grade, Wedge Insert Shape, Insert Thickness 0.125 In, Positive Rake, Rake Angle 60 Deg, Right, Screw-On Mounting Styl Here $9.99 star ting bid and NO reserve! Actual shipping charged. Good condition. Good luck! 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e6f2530c0-0xf2-
|
|
|
This auction is Genuine Aloris AXA8 Threading Toolholder in good condition(does have some grinding marks) PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This auction is Genuine Aloris AXA10 Knurling/ Turning Toolholder in good condition. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This auction is Genuine Aloris BXA7 Parting Cut-Off Toolholder in good condition. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ALORIS DA1 Turning& Facing Holders Condition: Good Questions? call Metro Machine& Tool 732-650-0666
|
|
|
ALORIS DA1(2 Pcs.Turning& Facing Holders Includes: Indexable Insert Holder& 3/4" HS Sq. Tool Bit Mfg by Armstrong(New) Condition: Good Questions? call Metro Machine& Tool 732-650-0666
|
|
|
This is a clean. Barely used 10" 4 JAW INDEPENDENT LATHE CHUCK PLAIN BACK I was not able to find the brand or model number. Comes as pictured Use message center if you have any questions. Posted with 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e8115963e-0x106-
|
|
|
Two. 1" Valenite Cut Off tool Insert holder VDBS-16 with VDBA-125-188-RA cartridges mounted on them Extra Insert holder Cartridge VDBA-188-218-LA new. Never used. You get the tools just as you see it in the pictures. Posted with
|
|
|
This is a used Cushman 8" 3 JAW LATHE CHUCK in good condition Please see pictures for mount type Comes as shown on the pictures. Use message center if you have any questions. Posted with eBay Mobile
|
|
|
This is a used 8" 3 JAW LATHE CHUCK in good condition Please see pictures for mount type Comes as shown on the pictures. Use message center if you have any questions. Posted with eBay Mobile Posted with
|
|
|
This is a nice tool I got from my uncles vintage estates This screw driver is in great working order and It may have some scratches and dings on it overall it is really nice. Please look at pictures for sizes and condition. Any questions please message me before buying. I do not ship outside of the lower 48 states USA Posted with
|
|
aims ENCO QUICK CHANGE TOOL POST + HOLDERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Enco. This is a Quick Change Tool Post with Holders in Good condition. For lathes with a 8" 12" swing. Features: Only a second to change tools. Rugged- No chatter or vibration. No time wasted with shims. Unlimited versatility. Safe and simple to operate. Speed your lathe operations up to 90 percent. For fine ... moreprecision work to heavy-duty cutting. Set includes the following Holders: 2)35A: Turning and Facing Holder: Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. Units have a max. capacity of 3/4" 1)35B: Boring. Turning and Facing Holder: V-groove holds round shank boring bars and tools as well as square tool bits. Unit has a max. capacity of 3/4" 2) 35C: 1" Capacity Boring Bar Holder: Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment ofboring bars. 2)35E: Parting Blade Holder 5/8" capacity. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ENCO QUICK CHANGE TOOL POST + HOLDERS ENCO QUICK CHANGE TOOL POST + HOLDERS ENCO QUICK CHANGE TOOL POST + HOLDERS Reliable Tool Inc. c 2011 | Powered by
|
|
|
This is a KDK type holder which means it fits on a KDK tool post but it was not made by KDK. Shipping via Priority Mail is $5.15
|
|
|
This auction is for a like new KDK#104 tool holder. Shipping is $5.15 via Priority Mail.
|
|
|
Universal Kwik-Switch tool holder for CNC machine. 200 series. We got this as a part lot of other assorted tooling we purchased and we'll never need to run a tool as big as can be carried by this holder. Maybe you do? In good condition. Will fit into a small usps'flat rate' box.
|
|
|
Nice condition Erickson NMTB TG-100 collet chucks. 9 units available. I will combine shipping. Please contact me for shipping price if buying multiple pieces prior to payment. Thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13ea5b0e8ce-0x101-
|
|
aims 2 VALENITE& TECNARA ENDMILL HOLDERS W/ NMTB30 SHANKS- 1/2" 5/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Valenite& Tecnara. These are 2 Endmill Holders in good condition. Specifications: Shanks: NMTB30. Capacities: 1/2" 5/16" Projections: 2-1/4" Overall Lengths: 5-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give ... moreus a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 VALENITE& TECNARA ENDMILL HOLDERS W/ NMTB30 SHANKS- 1/2" 5/16" Reliable Tool Inc. c 2011 | Powered by
|
|
aims U.S.A! 2 S.P.I& LYNDEX ENDMILL HOLDERS W/ NMTB30 SHANKS- read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by S.P.I& Lyndex. These are 2 Endmill Holders in good condition. Model#s: 74-615-6& N3006-0500 Specifications: Shanks: NMTB30. Capacities: 1/2" 3/4" Projections: 1-3/4" 2" Overall Lengths: 4-1/2" 5" Comes as shown in pictures. Check out the photos! ... moreif you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! 2 S.P.I& LYNDEX ENDMILL HOLDERS W/ NMTB30 SHANKS- Reliable Tool Inc. c 2011 | Powered by
|
|
aims 4 KENNAMETAL& OTHERS ENDMILL HOLDERS W/ NMTB30 SHANKS- 1/2" 5/8" 3/8" 1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Kennametal& Other Manufacturers. These are 2 Endmill Holders in good condition. Specifications: Shanks: NMTB30. Capacities: 1/2" 5/8" 3/8" 1/4" Projections: 1-3/4" 2" Overall Lengths: 4-3/4" Comes as shown in pictures. ... moreCheck out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 4 KENNAMETAL& OTHERS ENDMILL HOLDERS W/ NMTB30 SHANKS- 1/2" 5/8" 3/8" 1/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
KDK 119 QUICK CHANGE TOOL HOLDER FOR BORING HOLDS 5C COLLET ALSO INCLUDES HARDINGE 5C 3/8 COLLET IS IN FAIR CONDITION
|
|
|
KDK 105 QUICK CHANGE TOOL HOLDER FOR BORING HAS 1 INCH THRU HOLE
|
|
|
KDK 104 QUICK CHANGE TOOL HOLDER FOR OD TURNING OR BORING HAS A PROVISION FOR A CUT OFF BLADE BUT IS MISSING THE TOP HALF OF THE CLAMP IN FAIR SHAPE
|
|
NOTE:READ THE FOLLOWING BEFORE YOU BIDDING. We buy all our merchandise by bulk we look them over and try to describe the best we can.But they are used items and we sell as is. We pack well but recommend insurance on breakable items as we have no control over how the packages and how they are handled after they leave our hands. INVOICE: invoices will be send as soon as the auction is ended.Or the next business day. PAYMENT:We expect your payment to be paid or mail with in 3 days after auction.We follow EBAY guide lines and file for a non payment if We have no received your payment within 10 days. If your unhappy with your purchase once it’s arrived.Contact us as soon as possible and we will do our best to work it out with you. Two J.H. WILLIAMS& CO. Tool holders. =Agrippa N0. 81 Boring ... moreBar Holder. Cap 1/4"3/4" shank 1 1/16" x 1/2" =Knurling N0.1-K Tool Holder. Shank 1 1/8" x 1/2" COMES AS SHOWN ON PIXS. Check out my! PLEASE CKECK ALL THE PICTURES FOR MORE DATAILS. THANKS FOR LOOKING. MASSTOOLS07.
|
|
|
This is a Aloris BB6 boring bar 2" diameter 24" long in a CA fabricated holder. It takes a 1/2" tool bit. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13eb218e6d2-0xfc-
|
|
|
This auction is Genuine Aloris AXA7 Parting Cut-Off Tool in good condition but does have a few tooling marks that don't affect function. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 Aloris Boring. Turning, and Facing Holders#CA2 with tools& tips One Price. The tools are both Kennametal. Sizes,DDJNR-124B INS DN43& NSR-163C NK5. As seen in pictures. Because of the value associated with the holders and the tools I am offering this as a Buy it Now and also auction style for bidding. It will be shipped USPS Priority at $5.35.
|
|
|
This is a used Aloris DA4Q-2000 quick change tool holder. It is in good. Clean, serviceable condition. It fits with any Aloris DA quick change tool post. A new DA4 tool holder from Aloris lists for $259(plus any taxes and shipping) Check the Aloris Catalong here: Shipping is USPS Medium Flat Rate Box- currently $12.35. I don't charge any handling fees. I will ship within 2 business days. Thanks for looking.
|
|
|
Used. But very good shape BXA 200 series tool post with two tool holders(1 and#2 style) Wedge type, works great. Posted with 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13ec0c15655-0xfd-
|
|
|
This auction is Genuine Dorian D25AXA-2 Turning Facing Toolholder with insert holder in good condition. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
kwik boring unit bought this for 1 job been laying around to long.Sold as is we did use it,subject to prior sale locally, buyer pays for shipping
|
|
aims KDK QUICK CHANGE TURNING& FACING BAR COMBO. TOOL HOLDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by KDK Tools. This is a Quick-Change Turning& Facing Bar Combo. Tool Holder in good condition. Model# KDK-202 Specifications: Capacity: 820" Overall Dimensions: 5-1/2" x 2-1/4" x 2" Comes as shown in pictures. Check out the photos! If you have any other questions. Give us a ... morecall or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KDK QUICK CHANGE TURNING& FACING BAR COMBO. TOOL HOLDER KDK QUICK CHANGE TURNING& FACING BAR COMBO. TOOL HOLDER Reliable Tool Inc. c 2011 | Powered by
|
|
KDK-305 Quick Change Boring Bar Holder(Missing Set Screws) Manufacture: KDK MISSING SET SCREWS! SOLD AS IS) Comes as pictured Used- In Great Condition Shipping Includes Handling and Postage to the 48 Contiguous States(Alaska and Hawaii Extra) TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may beoffered to the next highest bidder within 4 business days. Any balance not paidin full will result in an unpaid dispute being filed with eBay after 4 businessdays. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please callus at 626-444-0311 for instructions. Credit Cards Due to fees charged by credit card companies to process a merchantsale. We do NOT accept ... morecredit cards for eBay purchases EXCEPT for PayPal payments.You may pay with PayPal as you normally do however we will not accept direct credit card payments via phone, etc. Cashiers Checks We accept cashiers checks and company checks. There may be a 1-5business day delay to verify funds on any non-certified check. Please contactus in advance if you have questions so we may accommodate the delivery scheduleof your item accordingly. California State Sales Tax State Tax applies to all state residents and businesses unless youprovide proof of a resale certificate to us. Please Fax to 626-443-9588. Warranty Sterling Machinery offers a 30-day MDNA sanctioned warranty unlessotherwise stated in the description of the ad. Items that are described andadvertised‘AS-IS’ are NOT covered by this warranty and the buyer releasesSterling Machinery from any liability or claims related to such. Frequently Asked Questions Q: Can Sterling Machinery Help with the logistics of Machineryshipping. And Loading? A: Yes. We can arrange for your machine to be loaded. Shipped via flatbed, orcommon carrier. We have relationships with machinery riggers, machinery movers,and trucking services, all over the world. Call today to see how much shippingwill be
|
|
|
A2Z CNC Quick Change Tool Post for South Bend 9" and 10 K Lathe. Incl udes 5 too l hold ers. This could also be adapted for other 7" 9" o r 10" Atlas/ Logan/ Craftsman lathes with a new T-Nut. U sed only a few times. Per fect Condition. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
SquareTrade © AP6.0 1, LOT# C2972 CALL US AT 937-672-9876 FOR ANY QUESTIONS FREE SHIPPING IN USA WE ARE OFFERING A KWIK SWITCH 200 COMPRESSION TENSION TAPER WITH(9) NINE COLLETS. COLLET SIZES ARE: 1/8"6,10,7/16" 5/16"3/8"8,1/2" AND 1/4" UNIVERSAL ENGINEERING GREAT CONDITION. WE HAVE MANY MORE KWIK SWITCH 200 LISTED AND ALSO LISTING MORE. PLEASE TAKE A LOOK AT OUR OTHER ITEMS WE HAVE LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your favorites list! 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ecd18126e-0xf2-
|
|
|
GOOD USED CONDITION SET INCLUDES CXA TOOL POST WITH STUD. NUT AND TEE NUT. ONE CXA2 TOOL HOLDER WHEN YOU LEAVE POSITIVE FEEDBACK FOR ME. IT TELLS ME YOU ARE PLEASED WITH THE ITEM/TRANSACTION. I WILL THEN LEAVE FEEDBACK FOR YOU. IF YOUR FEEDBACK IS GOING TO BE ANYTHING BUT POSITIVE PLEASE CONTACT ME FIRST
|
|
| | NMTB 40 TOOL HOLDER FACE MILL 1& 1/2' Q/C 991R, Click to View Image Album You are buying a used but good tool holder. This tool holder has a NMTB 40 shank. It is a face mill holder with a 1& 1/2' arbor, it has the quick change style flange, and it is made by Parlec. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. Payment, I accept the following forms of payment: PayPal Shipping& Handling, UPS Ground(prices calculated at checkout) Policies, STORE CATEGORIES, PAYMENTS, You may combine items to save on shipping. During checkout. We will apply your shipping discount. SHIPPING, Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your ... moreitem. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer s responsibility to supply us with the correct address prior to paying for the item. Your eBay account must be listed a business name to qualify for shipping discount. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 10 days have past. We ship 3 days a week. This means that your item can take as long as 10 BUSINESS days to receive your item. Inernational items may take longer. POLICIES, All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. If the item is not as described, you will receive a full refund. CONTACT US, Taps and More Joe D'Amico Cleveland. Ohio 440
|
|
This sale is for ONE USED Tripan made 30 DEGREE QUICK CHANGE TOOL HOLDER. No.132. This tool is designed to work with quick change tool#111. This tool is known for the universality to be used with many machines and can be set-up quickly without hustle and is accurate to +/ 0.01mm. Their most attractive feature is a triangular design that speeds up tool holding for cutting tools. Please note that this tool was previously owned and there may be chips or scrapes on the tool or bolts missing(refer to photos) The item is what it is. This high quality made TOOL HOLDER are being offered at an exceptional price. Thank you for looking. A rule may appear in the photographs for scale reference and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. We are ... morehappy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies In
|
|
This sale is for ONE USED Tripan made QUICK CHANGE TOOL HOLDER. No.131c. This tool is designed to work with quick change tool#111. This tool is known for the universality to be used with many machines and can be set-up quickly without hustle and is accurate to +/ 0.01mm. Their most attractive feature is a triangular design that speeds up tool holding for cutting tools. Please note that this tool was previously owned and there may be chips or scrapes on the tool or bolts missing(refer to photos) The item is what it is. This high quality made TOOL HOLDER are being offered at an exceptional price. Thank you for looking. A rule may appear in the photographs for scale reference and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. We are happy ... moreto Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and it
|
|
|
Assorted Quick Change Holders. Lots of 10. Fits Bridgeport V2XT. V2E3. As is. Assortment may include: End Mill Holders. ER Collet Holders. DA Tool Holders. Shell Mill Holders.
|
|
|
ALORIS BXA 2 QUICK CHANGE TOOL HOLDER W/ CARBIDE INSERT CUT OFF TOOL. IF SHIPPING IS DIFFERENT. I WILL SEND RECEIPT AND REFUND THE DIFFERENCE. THANKS
|
|
|
ALORIS BXA 2 QUICK CHANGE TOOL HOLDER WITH A CARBIDE INSERT CUTTING TOOL ATTACHED. IF SHIPPING IS LESS. I WILL SEND RECEIPT AND REFUND THE DIFFERENCE. On May-24-13 at 17:07:10 PDT. Seller added the following information: it will hold a 5/8" holder.
|
|
|
Very Nice- Genuine Phase II 250-100 quick change tool post. This is the correct size for 9" 10" and 12" swing lathes. Currently the tool post base is 2 3/8" x 1" x 5/16" This fits right on an Atlas Craftsman 10" or 12" compound top, or the T-slot could be machined or replaced to fit your compound top. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Straight good condition. As shown Posted with
|
|
|
Up for auction is this lot of 3 high quality CNC quick change keyless chuck collets. 7658-40 1/32 to 1/2. Poland. They are really nice. Thanks for looking and good luck!
|
|
|
Up for auction is a hard to find R8 to Kwik-Switch holder. It looks to be in very good condition and is ready to mount in your Bridgeport or Rockwell mill. Or any mill that uses R8. If you have any question, please ask! Will ship by USPS Priority Medium Flat Rate Box.
|
|
|
A used Aloris BXA#22 universal turning/boring holder with the unique design for angular turning. Contouring& chamfering. Cartridge has 12 indexing positions at 15 degree intervals. Has the double dovetail design which allows a wide range of applications. Shows slight use, has been modified by previous owner. This retails new for 270.00+. Thanks for looking.
|
|
|
Universal Engineering Kwik Switch II 200 Tool holder? Use this for parts or give it a try and see how it works. I have not tried it. This looks like someone made this from a spindle out of a machine. The number on the nut is: 805043 The locking nut turns freely and locks in to place. Seems to work fine. The smaller diameter measures approx. 735 then the next measures approx.1.377 Thank You! 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ee98a9c77-0xfb-
|
|
NO RESERVE THIS auction for 1-lot used: SWISS. E3 MULTIFIX QUICK CHANGE 40 POSITION/INDEXING TOOL POST + 4 HOLDERS. Works nice, T-nut is 1.150" wide(narrow area) 4-holders, all Swiss made, sold under Enco name, you will need 2-adjustment screws, and lock-nuts for them, used condition. Shipping $13 priority. Postal money orders& company checks always welcome! Local pick-ups are always welcome(no charge) The following is some very informative radio links: http:www.soundwaves2000.com/radio%5Fliberty/ http:www.republicbroadcasting.org/index.php?cmd=listenlive, http:www.gcnlive.com/Listen_Live.html Because you can handle the truth! May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after ... more9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described!
|
|
|
This auction is for a Phase 2 parting tool holder BXA#250-207 in excellent used condition with FREE US SHIPPING for 10-15" swing lathes. See my other auctions for more of this set. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the combined invoice. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my! 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13ef139a269-0xf7-
|
|
|
This auction is for a Phase 2 tool holder BXA#250-201 in excellent used condition with FREE US SHIPPING for 10-15" swing lathes. See my other auctions for more of this set. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the combined invoice. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my!
|
|
|
This auction is for a Phase 2 boring bar tool holder BXA#250-204 in excellent used condition with FREE US SHIPPING for 10-15" swing lathes. See my other auctions for more of this set. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the combined invoice. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listings for more items I'll be listing soon. Check out my! G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ef1399fdb-0xf1-
|
|
|
This is a good used phase two quick change tool post holder. It has no problems that I am awear of. I was told it was for a 15 to 18 lathe when I bought. It clearly is not. I am guessing its for a 10 to 13 swing lathe. I have used it for over a year now I just built a spacer for it to sit on while I used it. I just got a great deal for one made for my size lathe so that is why I am selling this one. Thanks and good luck bidding.
|
|
|
ALORIS CA1 QUICK CHANGE TOOL HOLDER W/ CARBIDE INSERT CUT OFF TOOL& ISCAR BLADE. All in good condition as seen in pictures. This will ship USPS Priority for $5.35 and arrive in 3 days or less from the ship date. NO RESERVE. Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13ef387f85f-0xf9-
|
|
|
ALORIS DA1-B-125 TURNING AND FACING BORING BAR HOLDER 1 1/4" TOOL CAPACITY. Aloris sets the standard for these quick change tool holders. Made in USA. This unit is used but in excellent condition. This tool holder is designed to hold a boring bar up 1 1/4" wide. I will ship this USPS Priority at $11.35. It will arrive within 3 days from the shipment date. THIS IS A NO RESERVE AUCTION.
|
|
|
Up for auction is an Aloris CXA-4D Tool Holder/Boring Bar Holder. The holder has been used but is still in great shape. It will sell as is(please view all photographs) Weight 4.0000 Bore Size 1' Height To Center of Bore 1' Overall Height of Toolholder 2' Family#4D Boring Bar Holders Style Boring Bar Holder Will ship via USPS Priority Mail(Medium Flat Rate Box) with delivery confirmation and insurance.
|
|
|
BORING BAR HOLDER This model is the Heavy Duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. 1 1/4" hole. As seen in pictures. CA Size. Ships USPS Priority at $11.35.
|
|
aims KNURLING TOOL W/ 8.5mm X 12.5mm SHANK& 10 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Knurling Tool with 10 Inserts in good condition. A knurling tool designed to operate from the screw machine turret. The knurling action is developed from the front cross slide working against the lever arm of the tool. Moving both knurling arms from open position to the correct knurled diameter. Specifications: Shank Size: 8.5mm X 12.5mm. Indexable Stations: 1. Overall Length: 4-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting ... moreour page for more Great Deals! Bidding starts at a dollar with no reserve. KNURLING TOOL W/ 8.5mm X 12.5mm SHANK& 10 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
This auction is for a lot of 2 40-NMTB collet chucks and one 100 series single angle 3/4" collet in good used condition. Both collet chucks look the same in every way except one ERICKSON#40-NMTB QUICK CHANGE 2-15-209-100 and the other has no information on it at all that I can find. All of the chucks. Collets and nuts have been taken apart threads and bearings cleaned and oiled. Email me with any questions before bidding or for an international shipping quote. I charge only actual shipping costs and I usually ship the same or next business day of receiving payment. I also will combine items when possible to save you on shipping costs. If this is the case email me and wait until I send you the invoice for your combined items. Your item will be carefully packaged. Insured, tracked and shipped ... morewith USPS. Check out my other listings for more items I'll be listing soon.
|
|
|
Here is a very nice condition Aloris Tool Post. I am including the CNC mounting block and top nut. I had this on my Mazak. And am now going another way. This is your opportunity to get the industry leading tool holding system for a super price. If you have any questions, let me know. I have 2 tool holders in other auctions, so watch those also.
|
|
|
~5~ NMTB-30 QUICK CHANGE KENNAMETAL ENDMILL HOLDERS 3/16"1" BRIDGEPORT CNC, 5 NMTB-30 QUICK CHANGE ENDMILL HOLDERS 3/8. 1/2-2pcs, 1"2pcs ALL EXCELLENT OR NEW CONDITION. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Genuine Aloris CXA-4 wedge type quick change heavy duty boring bar tool holder. Interior diameter is 1" It appears that someone broke off an allen wrench in one of the bolt slots. I tried to loosen the other bolt with an allen and it did not want to break free. Nice unit for a project. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Dorian Tool knurling tool holder. Stamped SCK-5050. Shank is 1/2" x 3/4" 2 1/2" long. Unit seems to have two positions. One parallel with the shank and the other at a 90 degree angle to the shank. There is a ball and spring that are intended to hold the head in these two positions. On the 90 degree position, the swivel head seems to jam up, you need to push down the ball behind the head to release position. This is what I found when I reviewed the unit. Also, one of the knurled wheels is a bit stiff. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
A used Aloris BXA-53 MT-3 tool holder. Has no chips. Cracks, repairs or owners marks. Comes with no modifications. Excellent condition overall. Thanks for looking.
|
|
|
This sale is for seven(7) DORIAN Quadra Indexing Quick Change Tool Holders. Included are: QITP35 1 Turning& Facing 3/4" 1" 2) QITP35 2 Turning. Facing& Boring 3/4" 1" 2) QITP35 4 Heavy Duty Boring 3/4" 1" One is missing adjusting screw as shown in picture) QITP35-7-71C Xtra Heavy Duty Cut Off Blade Holder QITP35- 41 Xtra Heavy Duty Boring 1-1/4" All items are in good. Clean& useable condition. Buyer pays all shipping; Ohio sales tax rules apply; Payment must be made within 5 days of close of sale. All items sold as is.
|
|
Inventory Number: 05131540022 Manufacturer: Description: 16 PC TRI-LOCK TOOL HOLDERS.TPA3/40-A,BH2,BH3,BH4 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 16, AS FOLLOWS- ONE: TPA3/40-A, TOOL HOLDER, NMTB 40 SHANK, TWO: BH4/1.500, 1-1/2" SHANK, FOUR: BH3/750, TOOL HOLDERS, 3/4" SHANK, TWO: BH3/750, TOOL HOLDERS, 3/4" SHANK(SHORT SHANK) SEVEN: BH2/750, TOOL HOLDERS, 3/4" SHANK, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, ... moreRI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as mon
|
|
Inventory Number: 05131540021 Manufacturer: Description: 28 PC TRI-LOCK TOOL HOLDERS.COLLETS,NUTS LOT,CN2,CN4,ER-11,ER-20,ER-40 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 28 PIECES, TWO: CN4/40 TOOL HOLDERS, WITH COLLETS, NINE: CN2/11, TOOL HOLDERS, SEVENTEEN: CN2/20, TOOL HOLDERS, NOTE: INCLUDES EIGHT(8) SYIC ER-20 COLLET NUTS, AND EIGHT(8) ER-20 COLLETS: REGO-FIX, CENTAUR BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt ... moreplease contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not o
|
|
|
UNIVERSAL ENGINEERING Kwik-Switch 300 Boring Head Arbor 3/4 x 16 tpi#803262
|
|
aims JAPAN! NIKKEN R8 SHANK QUICK-CHANGE TOOL HOLDERS W/ NIKKEN EC35 SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan. This is a Lot of Quick Change EC35 Tool Holders in good condition. Holder Type: EC35 Specifications: Endmill Holder Range: 3/8" to 1" Milling Arbor: 1" x 1-3/4" Long with 3/8" 3/4" dividers. Shellmill Holder: 1" x 1-1/2" Projection. Jacobs Taper: Beleived to be a#3(Large diameter: 683. Small Diameter: 635) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great ... moreDeals! Bidding starts at a dollar with no reserve. JAPAN! NIKKEN R8 SHANK QUICK-CHANGE TOOL HOLDERS W/ NIKKEN EC35 SHANK JAPAN! NIKKEN R8 SHANK QUICK-CHANGE TOOL HOLDERS W/ NIKKEN EC35 SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
aims GRAND TETERBORO/ OTHER ENDMILL HOLDERS W/ NMTB30 SHANKS- 3/8" 1/2" 1" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Grand Teterboro NJ& Other Manufacturer. These are 3 Endmill Holders in good condition. Specifications: Shanks: NMTB30. Capacities: 3/8" 1/2" 1" Projections: 1-3/4" 2-5/8" 3-1/2" Overall Lengths: 6-1/4" 4-1/2" 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. GRAND TETERBORO/ ... moreOTHER ENDMILL HOLDERS W/ NMTB30 SHANKS- 3/8" 1/2" 1" Reliable Tool Inc. c 2011 | Powered by
|
|
aims GRAND TETERBORO ENDMILL HOLDERS W/ NMTB30 SHANKS- 3/8" 1/2" 3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Grand Teterboro NJ These are 3 Endmill Holders in good condition. Specifications: Shanks: NMTB30. Capacities: 3/8" 1/2" 3/4" Projections: 1-3/4" 2" 3" Overall Lengths: 4-1/2" 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. GRAND TETERBORO ENDMILL HOLDERS W/ NMTB30 SHANKS- 3/8" ... more1/2" 3/4" Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f0abc90e5-0x102-
|
|
|
aims HEAVY DUTY ENDMILL HOLDERS W/ NMTB30 SHANKS- 5/8" 1" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 2 Endmill Holders in good condition. Specifications: Shanks: NMTB30. Capacities: 5/8" 1" Projections: 2-1/2" 3-1/2" Overall Lengths: 5-1/2" 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY ENDMILL HOLDERS W/ NMTB30 SHANKS- 5/8" 1" Reliable Tool Inc. c 2011 | Powered by
|
|
|
This Auction Is For A Dorian Tool Quick Change Tool Post SD25AXA- Tool Holder D25AXA-1 And Tool Holder D25AXA-7-71C All Three Items Are Used But In Good Working Condition Purchase Price Includes Free Shipping The Pictures Show Exactly What You WIll Recieve But Please Contact Me If You Have ANY Questions Or Need Additional Pictures ================================================================ Please Check Out The Pictures And If You Have Any Questions Please Contact Me Please refer to payment instructions for additional information- Please note that i only ship to the lower 48 U.S. E-mail me with questions or concerns- Item will be shipped within 2 business days after payment is received
|
|
|