|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
The mould with small side length is generally round, and the mould with large side length is generally rectangular. 1x hydraulic Hole Punch Die. Mold specification: Square. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: New Location: , United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
0 bids $6.00 Shipping
Condition: New Location: Chino, United States
45mm x 45mm Square Hole Punch Knockout Die Hydraulic Hole Punching Die For 8 Ton. Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -Due to the different display and different light, the picture may not reflect the actual color of the item.
Buy It Now
$7.00 Shipping
Condition: Used Location: La Plata, United States
Listed for sale are (6) vintage square-heal nail set punches listed as follws: - Starrett 3/32" - Starrett 3/32" chisel point - General 4/32" - Stanley 11 3/4 Alloy 1/32" - (2) marked Made in USA (2/32" & 3/32" These machinist/mechanics/carpenter tools are in pre-owned/used condition (see pictures) and will be shipped USPS Ground Advantage.
0 bids Free Shipping
Condition: Used Location: Seattle, United States
YOU ARE BUYING ONE CADDY MSP-20 HEAVY DUTY CAST ALUMINUM 1-11/32" STUD PUNCH FOR 1" THIN WALL.
0 bids $5.99 Shipping
Condition: Used Location: High Point, United States
The set does not come with any dies. The leather case has stains on the top, bottom and sides due to age.Measurements: 2.2” x 7.6” x 2.6”H
Buy It Now
Free Shipping
Condition: New Location: Lewiston, United States
• Slug-Buster punch profile splits slugs for easy slug removal. • New die design optimized for widest range of materials and drivers. • Knurled edge on punches for better grip. • Punches, dies and case made in the USA.
Buy It Now
Free Shipping
Condition: New Location: Secaucus, United States
Complete conduit punch set including wrench, 6 punches, 2 pull rod. Conduit Size: ½", ¾", 1", 1¼", 1½", 2". -Conduit Size: ½", ¾", 1", 1¼", 1½", 2". 2 Pull rods. 5140 steel material, heat treated to HRC48 hardness.
0 bids Free Shipping
Condition: Used Location: Goshen, United States
Good usable condition---Includes FREE shipping.
Buy It Now
Free Shipping
Condition: Used Location: Crown Point, United States
Here is a Greenlee No. 731 3/4” square punch that is in very good used condition. They are all still sharp. It runs on and off of the draw stud easily without any hesitations. Everything will work perfectly for you!
Buy It Now
$11.55 Shipping
Condition: New Location: Westport, United States
Unique shape of this 3/16" pot-leaf, marijuana leaf, CBD or cannabis leaf shape is hand-built in the USA. The punch has an open front top for good punching visibility.
Buy It Now
Free Shipping
Condition: New – Open box Location: Woodruff, United States
Greenlee 52042828FW Slug Buster Draw Stud, 3/4” to 3/8” Diameter, Knockout Punch. This is a new old stock tool without packaging. It remains in excellent new condition. USPS shipping 4 3/4” overall length
0 bids Free Shipping
Condition: New Location: , United States
Specification: Color: Black Material: 40 chrome steel Mold specification: Square d type: M20 x 1.5 Max. plate thickness (steel) : 3mm Max. plate thickness (iron): 3mm Size: 45 * 45mm Applicable material: stainless steel plate Features: 1. After heat treatment, it is firm and durable 2.Dimensional accuracy 3.Easy operation 4.Increase of efficiency Package Included: 1x hydraulic Hole Punch Die Note: -The mould with small side length is generally round, and the mould with large side length is generally rectangular -Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
0 bids Free Shipping
Condition: New Location: Chino, United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: , United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
8 Ton Square Hole Punch Knockout Die Hydraulic Hole Punching Die 45mm 45mm. 8 Ton Square Hole Punch Knockout Die Hydraulic Hole Punching Die 45 45mm. Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square.
Buy It Now
Free Shipping
Condition: Used Location: Los Angeles, United States
Preowned in excellent condition Note **** missing 1/2 punch ******In stock Ready to ship
0 bids Free Shipping
Condition: New Location: , United States
The stamping head is made of high-quality and durable materials, ensuring its compact and sturdy structure. The compact design makes it very suitable for use in small spaces, improving work flexibility and efficiency.
Buy It Now
Free Shipping
Condition: New Location: Brooklyn, United States
Color: Green Crimper. Style: Network Repair Tool. Batteries Required?. Batteries Included?. Usage: Professional.
Buy It Now
$9.99 Shipping
Condition: Used Location: Warner Robins, United States
Sold as pictured.
0 bids Free Shipping
Condition: Used Location: Johnstown, United States
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model GBEN KPR7540. • (1) Drawstud Pull Rod. Full Factory Warranty.
Buy It Now
$7.50 Shipping
Condition: New Location: Colgate, United States
The GB Gardner Bender KOM-50125 Mechanical K.O. Punch Set is a versatile tool suitable for punching 1/2", 3/4", 1", and 1 -1/4" holes in panels and light steel. This punch set is made in the United States and the brand is Gardner Bender. It shows no signs of use.The punch set is ideal for use in business and industrial settings and is categorized as a light equipment and hand tool under knock-out and punch sets.
Buy It Now
Free Shipping
Condition: New Location: Delhi GPO, India
UNIVERSAL TRANSFER PUNCH & ALIGNER : 3-1/8". Replaces different sized regular transfer punches. As well as, Covers the whole range with one punch. Spring loaded knurled body is pushed against the face of the work piece, perpendicular to the center line of the hole.
Buy It Now
Free Shipping
Condition: New Location: Brenham, United States
Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works great in tight areas. Knockout punch can be used with ratchet, wrench, or electric driver.
Buy It Now
$9.90 Shipping
Condition: New Location: Slatington, United States
Buy one set and get one FREE ! Hurry before they are all gone! Punches have three cutting edges, work on mild steel up to 11 gauge and stainless steel up to 16 gauge. These are high quality punches, made of heat treated carbon steel!
0 bids Free Shipping
Condition: Used Location: Henderson, United States
Unit is in overall very good condition normal wear and in good working condition.
Buy It Now
$7.97 Shipping
Condition: Used Location: Lindenhurst, United States
Good condition. Numbers are very crisp. Not beat up. They have some surface rust from sitting g around
0 bids Free Shipping
Condition: New Location: Chino, United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: , United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: Chino, United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Color: Black.
0 bids Free Shipping
Condition: New Location: Chino, United States
The mould with small side length is generally round, and the mould with large side length is generally rectangular. Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: New – Open box Location: Myerstown, United States
Hello, everyone! Up for sale is (1) Milwaukee 2677-21 M18 Force Logic 6T Knockout Tool. This has no effect what so ever on the actual product! Happy Buying!
Buy It Now
Free Shipping
Condition: New Location: Torrance, United States
Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
0 bids Free Shipping
Condition: Used Location: Fort Worth, United States
This item is preowned and shows signs of normal wear and use but is in great overall cosmetic condition and in perfect working order. What you see in the pictures is what you get nothing more is included. Please check out all the pictures for any questions about the condition of the item.
Buy It Now
Free Shipping
Condition: Used Location: Riverside, United States
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification: Color: Black Material: 40 chrome steel Mold specification: Square Die clearance: 0.6-0.7mm Thread type: M20 x 1.5 Max. plate thickness (steel) : 3mm Max. plate thickness (iron): 3mm Size: 45 * 45mm Applicable material: stainless steel plate Features: 1. After heat treatment, it is firm and durable 2.Dimensional accuracy 3.Easy operation 4.Increase of efficiency Package Included: 1x hydraulic Hole Punch Die.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
MILWAUKEE TOOL. Stainless Steel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
0 bids Free Shipping
Condition: New Location: , United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: Chino, United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. -The mould with small side length is generally round, and the mould with large side length is generally rectangular. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: Used Location: Levittown, United States
Vintage Whitney Punch #7 in good working condition. punch size is 9/32'. See Pics. Judge for yourself. Any questions feel free to ask. NO shipping outside the lower 48 states.
Buy It Now
Free Shipping
Condition: New Location: Saint Henry, United States
Rix Tools TriStar 1-7/32" (30.5mm) - Pushbutton Ball Bearing Stud Punch & Die for Mild Steel. The TriStar series are built for mild steel only. Finally, all sets are supplied in a heavy-duty plastic carrying case.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model GREE 34941. Greenlee 34941 Specifications Greenlee 34941 Features • For use with Slug-Buster Knockout Punch Kit 7238SB. • 1" Hex Ratchet Wrench.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
Buster + Punch Buster + Punch Detail Kit, Brass, NDK-05357.
Buy It Now
Free Shipping
Condition: Used Location: Charlevoix, United States
Greenlee Model 731 1/2” Square Knockout Punch. 500" 12.7MM. Preowned, but cutting edges are sharp and all threads good. See pics for actual item you will receive.Shelf #5-C Square Punch Tray ElectricDealsForYou Item #4060.
0 bids $19.50 Shipping
Condition: Used Location: Levittown, United States
Buy It Now
Free Shipping
Condition: New Location: Williston, United States
49-16-2702 Exact 1-3/8" SINK Plumbers Knockout Set with Case Milwaukee
Buy It Now
$19.99 Shipping
Condition: Used Location: Casper, United States
This Maxis Max Punch Set Conduit 1/2"-2" Southwire is the perfect addition to your tool collection. So why wait?. Slight use or non, mint condition! What you see in the pics is what you will receive.
Buy It Now
Free Shipping
Condition: New Location: Paramount, United States
Punch Size: 1/8" (3mm) height. 1/8" 3MM Letter & Number Stamp Set. Drop forged, heat-treated CR-V. Smooth sandblasted finish.
Buy It Now
$4.95 Shipping
Condition: New Location: Providence, United States
EverStamp superior quality steel marking stamp properly hardened and tempered to 58-60 rc. EverStamp Marking Devices Since 1898.
0 bids Free Shipping
Condition: Used Location: Lancaster, United States
GREENLEE SLUG BUSTER KNOCKOUT PUNCH SET 7237BB Great Shape T-34
Buy It Now
Free Shipping
Condition: Used Location: Hallandale, United States
Buy It Now
$9.98 Shipping
Condition: Used Location: Dallas, United States
Buy It Now
Free Shipping
Condition: New Location: Muskegon, United States
Heavy duty, they can punch holes in both mild and stainless steel material. Large size ID markings on both the punches and dies permit easy punch and die selection. EXACT punches and dies do not require spacers.
Buy It Now
Free Shipping
Condition: Used Location: Charlevoix, United States
See pics for actual item you will receive.Shelf # 4-C ElectricDealsForYou Item #4045-A. I am happy to drive to catch the Regional Truck if necessary; mileage fee will apply. (Based on availability. ).
Buy It Now
$19.95 Shipping
Condition: Used Location: Seattle, United States
0 bids $5.00 Shipping
Condition: Used Location: Grass Valley, United States
Used one time and then put it back in the box
0 bids $7.00 Shipping
Condition: New Location: Sheffield, United States
This Greenlee 737BB Knockout Punch Set is the perfect addition to any tool collection. Made by a trusted brand, this set includes punches and dies for various applications. The model number is Greenlee 737BB, making it easy to search for and identify. Ideal for use in business and industrial settings, this set is a must-have for anyone in the light equipment and tools industry. Whether you're a professional or a DIY enthusiast, this knockout and punch set is sure to come in handy.
0 bids Free Shipping
Condition: New Location: , United States
Specification: Color: Black Material: 40 chrome steel Mold specification: Square Die clearance: 0.6-0.7mm Thread type: M20 x 1.5 Max. plate thickness (steel) : 3mm Max. plate thickness (iron): 3mm Size: 45 * 45mm Applicable material: stainless steel plate Features: 1. After heat treatment, it is firm and durable 2.Dimensional accuracy 3.Easy operation 4.Increase of efficiency Package Included: 1x hydraulic Hole Punch Die.
Buy It Now
Free Shipping
Condition: New Location: , United States
Size: 45 45mm. 1x hydraulic Hole Punch Die. Mold specification: Square. plate thickness (iron): 3mm. -The mould with small side length is generally round, and the mould with large side length is generally rectangular.
|
|
|
|
Set of One(1) Greenlee Replacement Knockout Punch and Die 1 7/32" Actual Diameter Punch. Greenlee part#s 5005180 and 5005179. Inspected and ready to go to work for you. No bad threads or chips on punch. Mulitple lots available with $.60 additional shipping per lot. Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou- 1348.1352,1353,1354,1355,1356, n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e19e0fa1b-0xfb-
|
|
Up for auction is a Granberg Break-N-Mend chain breaker/repair tool. This chain breaker is used but has lots of life left(see pics) Don't know much about these. Dies appear to be all there, vise grip action works well, looks to be in good usable condition. Don't have a good idea where to start on this, these seem to go for between $20 and $40 buck used here on Ebay, will try $14.99 with free shipping, 7 day auction, see what happens. Accept Paypal only and ship to U.S. only. Make sure to look for my other auctions and items. I try to price whatever I am selling lower than currently priced online competition, I might not have what you're looking for, but if I do you'll save some money. If shipping is charged I will combine shipping for multiple auctions if items will fit in ... moresame package. If not I will usually discount shipping for multiple items but can make no promises, I will always attempt to keep shipping costs as low as possible for multiple items, please ask specific questions about items or shipping BEFORE making a bid.
|
|
|
PIONEER ROUND METAL CHASSIS or ELECTRICAL PUNCH. SIZE 1" Good used condition. USA made.
|
|
|
This is a Used Thomas& Betts 15513 Connector Die#1 AWG Green 37 Thomas and Betts. Makes this connector die for use with the TBM-14M hydraulic crimp tool. Made for#1 AWG and#2 AWG Flex lugs and splices, it is color-keyed GREEN(die color) 37(die code) for easy identification. When being used with the TBM-15I tool, the 272X121 die adapter is required. As with all my listings your satisfaction is guaranteed. I ship UPS with daily pick up. Orders paid for by 3:30 pm central time will ship the same day. Check my feedback and buy with confidence.
|
|
|
Greenlee slug buster knock out set. 1 1/2 and 2 inch
|
|
|
Greenlee Slugbuster 1" Conduit sized Punch set. Includes Greenlee 500-4040 ball bearing draw stud. Inspected for nicks. Cracks and bad threads; this set is ready to work for you. Please check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou-1263
|
|
GREENLEE KNOCKOUT& PUNCH 500-4013 500-6974 1-1/4" 2 1/16" outside item o.d. 1 11/16" inside item o.d. PLEASE NOTICE ITEM MAY HAVE SLIGHT RUST. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. ... morePayment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept perso
|
|
|
x BLACK HAT AUCTION x Lot of 3 Greenlee AV-124 Knockout Die 3/4" We do our best to accurately describe our products. Thats what our 100,000+ FEEDBACK reflects! Condition: Very good SKU# PDR-25 LH-17623 X Powered by
|
|
|
Very nice HP Tools 9 pc. Punch set. Used but very lightly looks brand new
|
|
|
I have several knockout punches for sale. They belonged to my father who is a retired commercial electrician. Please look at the pictures closely all the components appear to be complete and in good condition however I'm not an electrician.this auction is for a greenlee knockout punch# 737 BB with fittings for 1 1/2" and 2" conduit. This piece is in exceptional condition with very little signs of use. Sold as-is thank you Posted with
|
|
This Auction is for a Current Tools 141 1-11/32" Steel Hole Stud Punch. This item is used but i good condition. It does have some previous wear and scratches on the item. It's Punches steel studs up to 20 gauge. Self-clearing mechanism to help avoid punch hang up. It handle desinged to allow for tight clearance, self- centering on standard width studs, lightweight aluminum body, the capacity-minimum stud width is 2- 1/2"This item is in good condition and at a great price, if you have any questions please ask before bidding and see all pictures. It works great see pictures. Therefore this item will be SOLD AS IS AND NO REFUNDS WILL BE PROVIDED. If you have any questions or would like additional pictures please feel free to email me and I will be glad to get back to you. Allow ... more24 hours for replies and if you would like more pictures please enclose your email address. Item Condition: Most of our items are used unless otherwise stated. Condition is our opinion only; all pertinent questions should be asked prior to bidding. Normal wear and tear is to be expected. We are more than glad to send more pictures of the items you are interested in; so please ask for additional photos. Bidding: Please ask questions before bidding. Please do not bid unless you intend to purchase the item. Serious bidders only! Payment: Payment is due within 5 days of the auction’s end. If you cannot pay by the end of those 5 days. Please contact us so that we will not file you as a non pay bidder. Feedback: If there are any issues or concerns please contact us prior to leaving feedback. Feedback is now permanent and once it is left we cannot do anything to resolve the issue. Once we receive positive feedback. We will be glad to do the same for you. Shipping: We ship within 3 days of receiving clear payment. Confirmation/tracking numbers will be provided when the item has been shipped. Local pickup is available upon request.
|
|
|
Greenlee 11/16" 730 Radio Chassis Punch 11/16" Actual Diameter Punch and Die. Punch is used. But in good shape. Minor scratches/surface rust. Comes as pictured. I personally inspect each punch I sell and do my best to point out anything that I would want to know prior to purchase. I have a large variety of RC punches in stock, with only.60/ea additional shipping. So feel free to check out my other listings and save with combined shipping. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou. 1404
|
|
ebay template Item Report Item Description Shipping Info Payment Info UNIPUNCH 8B 1 3/4" WIDE W/O PINS PUNCHING UNIT. FUNCTIONALITY, EXCELLENT(used: 100% functionality) CONDITION, EXCELLENT(looks like new) ITEM AVAILABILITY, More Than One UNIPUNCH 8B 1 3/4" WIDE W/O PINS PUNCHING UNIT UNIPUNCH PRESS TOOLING MODEL 8B 1 3/4 1 3/4" WIDE NO PINS INSERTED MADE IN THE USA Manufacturer: UNIPUNCH Model: 8B 1 3/4" Product: NO TOP OR BOTTOM PINS Our Stock Number: 16242 Weight: 18 Lbs. Dimensions(shipping size) 2 in. Wide x 7 in. High x 13 in. Deep Descriptions take Precedence over Pictures. Our TERMS& CONDITIONS on this item page take precedence over e B a y guidlines. Qn=" at the end of the title is the number of items in this lot. To see more items in our Asset Store go ... moreto" on the web. We are an e B a y Trading Assistant. PLEASE READ THIS ITEM PAGE THOROUGHLY before asking us: QUESTIONS. BIDDING, or BUYING. Your purchase is also your acknowledgement that you agree to all of our Terms& Conditions outlined on this item page. Free Shipping where applicable is only to 48 continental states(HI& AK excluded) SAFETY DISCLAIMER- Buyer/Purchaser fully understands that the possession and operation of any industrial equipment or machine has inherent dangers and safety requirements. Buyer/Purchaser agrees that he/she has complete working and operational knowledge related to this item. As it relates to safety guards, rotating parts, cutting tools, electrical shock, safe operating speeds, and any other components of the machine, present or missing. Buyer/Purchaser agrees to hold Seller and his agents harmless from any injury or tort resulting from the operation or possession of this item. Our liability is limited to the Selling price of the item. See E stimated Shippping Rate on this page for your Total Shipping Cost(includes handling& packaging cost) Please note that the Estimated Shipping Rate is subject to adjustment by distance. Destination, and current rates. US Shipping means 48 cont
|
|
GREENLEE 7904 KNOCK OUT QUICK DRAW HYDRAULIC PUNCH DIE GREENLEE 7904 KNOCK OUT QUICK DRAW HYDRAULIC PUNCH DIE SET. 1/2 TO 2 INCH WORKS FINE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 ... more698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
For your consideration. A Greenlee punch, no. 5060249. 1 7/32" or 30.5mm. This is in good used condition, showing some signs of use. Blade is sharp& crisp. Buyer to pay $12 priority mail shipping.
|
|
You are bidding on 2 nice GREENLEE hydraulic slug buster sets.These knock out sets are in used condition with normal wear and tear.I have tested both sets and they are in perfect working order.The hydraulic's are in great shape as you can see from the pictures,the handles stay up on there own and ARE NOT loose like some worn out pumps.The Greenlee box has seen better days,the latches hold but are loose and slightly damaged but still serves it's purpose well. The first set in box is a complete set including the Hand pump.Cutters and dies 1/2" through 5"3/4 shaft,screw sleeve,3/8 adapter draw stud and 3 spacers. The other set inludes the Hand pump.3/4 shaft and 3" cutter and die. If you have any questions or would like more pictures please feel free to email me.Thank you ... morefor looking and good luck bidding. Sorry but i only ship to the US and shipping includes conformation.If you would like insurance please ask before sending payment.Thank Again. Posted with
|
|
|
YOU ARE BIDDING ON A GREENLEE PUNCH SET PART# 500-4232. 500-4231 PLUS THE BOLT. THIS PUNCH IS 2 IN DIA AND IN VERY GOOD CONDITION. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e543f5cd6-0x101-
|
|
|
I got this Greenlee Knock Out Punch Set from a recent estate. This is a larger 1 1/2" 2" set. Greenlee P/N 500-4061& 500-4063. The strap on the case is broken, but otherwise all pieces are in good, undamaged, unabused condition. USA 48 states only bidders with the winner to pay 12.65 USPS shipping to 48 states. Please take a moment to read my brief message under'Seller's Payment Instructions' on the'Shipping and Payments' page and contact me with questions/concerns before bidding. Thanks for your interest. QtMiler.
|
|
|
Up for Auction nice used Gardner Bender KNockout set in case Includes 1-1/2" ko. 2" ko and draw stud. Check out the pics. Shipping = 12.00 Payment due in 3 days after auction ends. Ships 3 days after paid for
|
|
|
THIS AUCTION IS FOR CURRENT TOOL EMT ROLLER SUPPORT FOR 1 1/2" 2" EMT CONDUIT 2-1100. EQUAL TO GREENLEE P/N 23541. 2-1100 1-1/2” 2” EMT support roller unit 40 lbs. All shoes and roller supports will fit Greenlee® 555® Electric Bender All shoes and roller supports will fit Greenlee® 555® Electric Bender* 1-1/2” 2” EMT support roller unit Greenlee® and 555 PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee Chasis Punch 1 and 5/32" Used. As Shown As Is. US sales Only. Upper 48 pays flat rate of $5.50 shipping AK. HI, PR pay actual shipping. Pay Pal within 3 days of auction end.
|
|
|
GREENLEE 709 METAL STUD PUNCH FOR 1-5/8" AND WIDER STUDDING GREAT SHAPE GREENLEE 709 METAL STUD PUNCH FOR 1-5/8" AND WIDER STUDDING PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
This is sharp with no breaks or nicks. I will be happy to add pictures and answer questions. Shipping will be cheaper if you are nearby. Thank you for looking.
|
|
|
Greenlee Knockout Set Model 1906. It has dies from 1/2" to 2" This set is in very good looking condition considering what these things go through. Set comes as pictured. All dies are sharp and ready to cut. Next day shipping!
|
|
Vintage Greenlee 1 3/16" diameter Radio Chassis Punch No. 730 Rockford. Illinois Click to Enlarge Click to Enlarge Click to Enlarge For auction we have a vintage Greenlee radio chassis punch tool. Condition is very good. It even has the original tin! At a 99 cent opening bid you just can't go wrong! What made eBay great? Insanely low starting prices on truly unique items that fill gaps in your collection or bring back an important piece of your history. Most sellers have strayed from auctions with low starting prices but where is the fun in that? That rush that we all used to feel when we thought we had found exactly what we were looking for and could practically steal it-all gone. Actually. It's not all gone. We still believe in it here and will be putting our wares where our ... moremouths are by offering items that are valued at up to hundreds of dollars all at absolute auction. As we trade you will enjoy service that is as old fashioned as the merchandise we deal in; Please save us as a favorite as we have thousands of items which will all be liquidated at 99 cent opening bids with NO RESERVE! Please carefully review our photographs and ask any questions you may have prior to bidding. Good luck and enjoy the auction! Handling time is 3 days or less. Tracking information will be uploaded to eBay when your package is processed and is easily viewable in the right hand drop down beside the item. Simply click" Track Package. Insurance is not necessary. We guarantee safe delivery of your item or your money back! Attention Overseas Customers: We offer"First Class Package" service. Which has no tracking beyond the border and is not eligible for Seller Protection. In exchange for substantial savings the buyer will assume responsibility for the item once our tracking shows it arrives at the US Port. If you are unwilling to risk it please select either Priority or Express Mail International service. Paypal only at this time. Payment is appreciated within 3 days of sale date unless arrangements have b
|
|
|
Nice used Greenlee 1 5/32" round punch. Part# 1817223
|
|
You are bidding on a Greenlee Knock Out Slug Splitter 1/2" 2" Set. They do have scratches from normal use. You will get a 767 hydraulic pump. Re amer. 5 studs, 2 pinch spacers, and 6 knockout punches: 1/2, 3/4, 1, 1 1/4, 1 1/2. And 2" They are still in good condition. Please check out all pictures, they come in a green hard plastic case. $30.00 shipping. Rules and Condition of Sale: PLEASE READ! Please note almost all items for sale were purchased used in our store. We try to describe them to the best of our knowledge.Mostly all items are used unless described as new. All items described as sold as is we be clearly stated in our auction and their will be no returns on these items labeled AS IS. Return shipping will be paid by the buyer. We accept the following forms of Payment- ... morePaypal. Foreign bidders need to request permission before bidding. For AK. HI, PR, APO Boxes and other non-continental US residents– Shipping will be MORE than quoted in the auction so please email before sending payment if you win our auction. Pickups are welcome. Fee will be charged. IF CASH IS USED ON ITEMS THAT ARE PICKED UP IN PERSON, there will be NO 3% fee for pickups. Ca sales tax 8.00% Serious bidders only. Thank you for being interested in our items. Good Luck.
|
|
|
Used Panel Punch. 9 Pin Connector Electronic Connector Panel Punch. Number of Pins 9, Capacity 16 Gauge Steel/10 Gauge Aluminum, 0.787 x 0.982 x 0.469 Inch Item Panel Knockout Punch. Type Electronic Connector. Hole Size(In. 0.787 x 0.982 x 0.469. Number of Pins 9. Max. Capacity Mild Steel(Ga. 16. Retails New $875.00 from Grainger
|
|
|
Greenlee Rectangle Punch 1.811 x 3.622" 46.0 x 92.0mm. Greenlee Part#s 60070 60069 and 60068(unit) Punch is in great usable shape. Showing little/no wear on the cutting edges. The draw stud is completely usable, although the first couple threads are stripped(threads into a hydraulic ram by hand with no problems) This unit is a great deal, check out the MSPR, then my feedback, and bid with confidence your getting a great deal! Thanks for looking and have a great week! electricdealsforyou- 1553
|
|
|
You are looking at four punches from 1 1/4 to 2 1/2 inch conduit. One Ball Bearing dreive on long screw and one each of 1 1/4-1 1/2-2" and 2 1/2 conduit. All Items are in excellant condition. Most of the problems will be because they have been in shop box for several years. All will be sharp and will the ball bearing drive should make for easy punch. Thanks for looking at my items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Nice condition. Just needs a light cleaning on a wire wheel. It was not used much if at all. Still very sharp. Instructions are solid except for back page has some holes in it. Buyer to pay exact shipping only no handling charges. It will ship at 1 pounds from 19350. Payment by PayPal. Other payment options are available just ask.
|
|
|
Greenlee 229 9-pin D-subminiature panel punch kit. Lightly used. EXCELLENT condition.
|
|
|
Greenlee 735/735BB Knockout Punch Set.Complete set for 1/2"3/4" 1"and 1 1/4"conduit size holes. Punching Capacity: 10Ga. 135" mild steel. Punhes and dies may be used with Greenlee 1804 or 1904 ratchet drivers and 7646 or 7625 hydraulic drivers. 735. =Standard. 735BB = Ball. Bearing. The box measures 8" x 4" Thanks for viewing our auction and happy bidding. Payment due within 7 days of auction end. View all photos carefully.
|
|
|
Used Greenlee Punches no studs 1 5/8" dia. 1 1/16" dia 1/2" conduit 7/8" dia Please ask questions before bidding
|
|
|
Used Greenlee Cat#730 Round Metal Punch set 1"Diameter Please ask questions before bidding
|
|
|
Very nice used with case. Punches are sharp.
|
|
Greenlee Rockford. ILL Conduit Knockout Punch Set This knockout punch set lot is for putting various size conduit holes in sheet metal panels. Boxes, or enclosures. In good used condition. It has several scratches and scuffs from normal use. Furthest Right pictured top Bolt Greenlee KR25 2" AV441 Middle 1 1/2 Greenlee 500 4061 Left top Bolt Greenlee AV249 1 1/2 Pat No. 181722 Smaller one pictured on left is: Bolt Greenlee 500-4045 1/2 Greenlee 501-4722 otuer 1/2 Greenlee 7/8 dia 500-4006 1 1/4 Greenlee AV128 outer 1 1/4 Greenlee AV127 inner Silver colored Bolt Greenlee AV249 3/4 Greenlee Punch Front bottom right 3/4 AV124 outer 3/4 AV123 inner Have any questions or need more pictures? I'll be glad to meet your request. High seller ratings. Been on eBay for 14 years. I offer combined ... moreshipping discounts. See my other. Paypal.com available for fast shipping and secure payment.
|
|
Hell o and th anks for looking. Up for sale is a S et of 4 Gre en lee punch driver punches. This set is in Very Good Condi tion and inclu des 4 pu nches and the Green metal carry case. Greenl ee's ISO 9001 Certi ficati on prov i de s proof of their ongoi ng commit ment to quality. You will receive the exact item as shown in the photos. This set includes: 2 1/2" Conduit(500-4177) 3" Conduit(500- 4 185-5) 3 1/2" C onduit(500-4653) 4" Con duit( 500-4656) We are offering this Set of 4 Greenlee punch driver punches for sale at the'BUY IT NOW' price of $349.99. You can buy with confidence from an Established Seller. All items will be shipped within hours of receiving payment! Thank you for looking and buying here with us. We have hundreds of items listed every day ... moreso be sure and check out our other listings!
|
|
|
This Greenlee 7906SB Quick Draw 90 Hydraulic Punch Set Includes the 744 Hvy Duty Kit with 1/2" 3/4" 1" 1 1/4" Punches and the following as pictured: 79904SB Driver, 5 each Standard Punches 3/4" 1" 1 1/4" 1 1/2" 2" the 33967 Adapter, 1924AA Spacer with 31872 Draw Stud, Slogsplitte Draw Stud 502.9452-0(badly bent) HSC# 95633 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Up For Auction is a USED Greenlee 1 1/4 Conduit Knock Out Punch. AV128. Barn Found. Rusty. Does Turn Freely Though. Bolt is even Marked Greenlee. Please look at pictures and ask questions prior to bidding. Thanks for looking and Good Luck.
|
|
|
This is Greenlee#735 knockout punch holder made of leather. The holder is in excellent condition with a strong makers imprint and no flaws or repairs. I'm hoping someone can use this to protect their tool investment. Please s ee my other listings for outstanding tools. Planes, saws, braces, and vintage estate items. I always combine shipping to save you money. I will ship worldwide and shipping to the US will be a flat rate of $3.00. International bidders. This holder weighs about 1 pound packed.
|
|
|
comes with pouch 3/4"1" 1 1/4" in good conition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e9bfb7fa4-0xf8-
|
|
|
The knockout are used but still in good condition. Shipping international will be additional cost.
|
|
|
This punch will make a 1 1/4 inch hole. It is in good working condition. I accept PayPal and other payment methods. International buyers PayPal only. International buyers. We will not be responsible for non-delivery of items shipped USPS 1st Class International. Buyer pays shippping as calculated below
|
|
|
This punch will make a 7/8 inch hole. It is in good working condition. I accept PayPal and other payment methods. International buyers PayPal only. International buyers. We will not be responsible for non-delivery of items shipped USPS 1st Class International. Buyer pays shippping as calculated below
|
|
Lot 9 Vintage Greenlee Radio Chassis Punch Box 7/8" to 2 1/4" NO RESERVE We are once again honored to be assisting a local family as they begin to liquidate part of their collection. This auction is for the following item: Dad had a TON of stuff. So we are beginning to list some items for the family. These were found in a box under dads workbench, apparently got too close to moisture as there is moisture and rust seen in the box, and also on some of the actual puches. Some of the punches have a number inscribed on them, and one has yellow paint dab on it, as seen in photos. Sizes include: 7/8" 1" 1 1/8" 1 5/32" 1 3/16" 1 1/4" 1 3/8" 1 1/2" 2 1/4" I dont know anything about tools. But would assume these could be cleaned up and used no problem? ... moreAll One Price These are used. Which is why we took so many photos. Some of the boxes are easier to open than others from the moisture and rust of the metal corners. Please ask questions before bidding Thanks for looking. NO RESERVE Please ask questions before bidding. TFOT welcomes credit card payments through PayPal. Payment is required within 3 days of the close of the auction. If you have extenuating circumstances. Please email us immediately to notify us of any problems. We reserve the right to accept or deny the extension of time. At TFOT we pride ourselves on the quality of items we offer for sale through Ebay. And we pack and ship our items professionally to ensure each item purchased arrives safely and in the condition as listed. Our items are shipped per the checkout option. Items typically ship within 3 business days of receipt of payment. Shipping days are Tuesday. Thursday, Friday& Saturday. We do our best to notify you by email when your item has shipped. If payment is through PayPal and the shipping address is different than your confirmed address in PayPal. You must email us directly to let us know of the requested change. We reserve the right to accept the change of address or your item will ship to t
|
|
|
Greenlee 7238SB Slug Buster Punch Set plus lot of punches over $750 value! Here's the list of the other punches in the photo. Most of which were only slightly used. 730BB-2-1/4- 2.25"57.1mm. 36171- 2.13"54mm. 730BB-1-5/8- 1.62"41.3mm. 7211BB-1- 1.36"35mm/1"conduit. 730BB-1-1/16- 10.6"27mm. 1-7/32"30.5mm. 875"22.5mm/1/2"conduit. 638"16.2mm. 12.5mm. 880" x 1.780" 22.4mm by 45.2mm) rectangle.
|
|
|
Hello everyone. Up for auction are this set of three Greenlee round Radio Chassis knock out punches. Used and in very good usa ble condition. They operate smooth ly and the cutting dies are free of c hips. Buyer pays shipping shown. No sales or shipping outside the USA. I acc e pt PayPal only as payment which is due within 3 days of auctions end. Please see my other listings for other interesting items. Thanks for looking! Dave
|
|
Vintage Greenlee Chassis Punches and an Adel Nibbling Tool These hole punches and the nibbling tool have been in a drawer in my shop since I had to give up my scratch building activities due to a stroke. These are good used punches and the diameter of the holes produced are as follows: 1 1/4” 1 1/8” 1” 3/4” and 1/2” NOTE: There are two(2) of the 1” 3/4” size punches and six(6) drive bolts but the drive bolts are all interchangeable. The nibbling tool trims. Notches, and cuts and is handy for making rectangular holes, key-ways, etc. A big advantage of this tool is that it makes holes without distorting the metal or producing the screeching when using a file. Both tools are handy for working on an aluminum chassis or panel. This auction is for the seven Greenlee Punches and the Adel nibbling ... moretool. No Reserve. Ships to US only. Questions before bidding please. Thanks for your interest.
|
|
Greenlee misc. Conduit Knockout Hole Punch/Die Set This hole punch set lot is for putting various size conduit holes in sheet metal panels. Boxes, or enclosures. Tools have scratches and scuffs from normal use. Expen$ive to purchase new! Furthest top right pictured item Threaded stud bolt Greenlee KR25 2" AV441 Middle top 1 1/2 Greenlee 500 4061 Left top Threaded stud bolt Greenlee AV249 1 1/2 Pat No. 181722 Smaller one pictured on left is: Threaded stud bolt Greenlee 5 00-4045 1/2 Greenlee 501-4722 otuer 1/2 Greenlee 7/8 dia 500-4006 1 1/4 Greenlee AV128 outer 1 1/4 Greenlee AV127 inner Silver colored item Threaded stud bolt Greenlee AV249 3/4 Greenlee Punch Front bottom right 3/4 AV124 outer 3/4 AV123 inner Have any questions or need more pictures? I'll be glad to meet your request. ... moreHigh seller ratings. Been on eBay for 14 years. I offer combined shipping discounts. See my other. Paypal.com available for fast shipping and secure payment. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13eaa5243b7-0x102-
|
|
|
Greenlee 1 7/32" Oiltight Punch Set. In excellent used condition. The punch shows no signs of ever being used. While the die only shows minor handling marks. The threads are all in perfect condition. Great working punch. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1582
|
|
|
UP FOR AUCTION IS A SET OF IDEAL SLUG BUSTER KNOCKOUT SET COMES WITH TWO DRAW STUDS.1/2' 3/4' 1' 11/4' 11/2' USED WITH SOME RUST FROM SITTING IN THE SHOP. STILL WORK GREAT. ANY QUESTION EMAIL ME
|
|
|
Greenlee 730 Round Chassis Punch Set Lot includes 2" 1 5/8" 1 3/8" This vintage lot of 3 Punch sets are in the condition as listed and as shown in the photos. 1 5/8" Appears as new 2" Excellent condition but possibly has been used(check out the close up photos) 1 3/8" has surface rust but looks great otherwise. The threads all look good on this lot. They all come in original boxes. I have more listed so check them out. See the photos and email for questions I am happy to combine shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Up for auction is a nice working Hydrolic KO set. I'm not going to slap a fresh coat of green paint on this item nor the box as I've seen others do. All parts function correctly and I have used prior to putting up for auction. The KO's are in great condition with the exception of the 1/2' and 3/4' KO's which are chipped. They still work but would recomend replacing. The shipping is high as I do not know where the item will be shipped to. I will however refund any overage paid by buyer for the shipping paid vs. the actual packaging and shipping fee cost to me. Greenlee 7506 Specifications: Conduit Sizes– Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size punch actually makes a 7/8" hole. 1/2" 2" Conduit Size Slug-Splitter ... moreSC(Self Centering) Knockout Punch Kit Greenlee 7506 Features: Slug-Splitter SC(self centering) knockout punches with capacities up through 10 gauge(3.5 mm) stainless steel. Self-centering punch aligns itself on pilot hole. No need to draw crosshairs or line up die alignment marks. Fast. Easy and simple to operate. Compact design makes this a perfect choice for use on construction sites and maintenance jobs. Will also drive 751 Cable Cutter head. Powerful 11-ton hydraulic ram. 3-foot hose. Comes with 1 short. 2 medium, and 1 large sleeves; and 2 different draw screws.
|
|
|
Here is a very nice used Greenlee number 710 metal stud knockout punch. Used a couple times and in very nice condition
|
|
Hello. For sale is a Greenlee Slug Buster Quick Draw Flex Set. Model 7706SB. It is in near mint condition. It will cut 1/2" through 2" holes for electrical fittings. It has only been used once. The only cutter used was the 2" It was used to punch 2-2" holes in the back of 2- 125 amp panel cans in a duplex residential service. A Unibit was used for the pilot hole, so no other cutters was used. This KO set still has the factory lubricant on all parts. It has been in the tool bin in my van for about 2 weeks. I do not have the literature. But no big deal if you are an electrician. If you are an electrician. You don't need it. Because I'm sure this isn't your 1st rodeo. The cheap plastic handle fell off& got lost. Other than that, this set is still new as far ... moreas I am concerned. I bought it when doing an insurance job. So I bought it spur of the moment. I still have a Greenlee 1/2" through 4" so I really never needed this KO set. I guarantee it to function 100% Like I said. It's still new in my eyes. I know what I am talking about! I have 38 years of electrical below my belt. This wasn't bought at a Flea Market. Yard Sale, Estate Sale, Garage Sale, etc. I know that what I sell on eBay is my own personal items! Please e-mail me for any questions that you may have. Thanks for looking! PayPal Only! Local pickup in the New Orleans area is accepted with cash payment only! I will ship to the Lower 48 States Only. I will ship to a confirmed address only! No 3rd party transactions. No APO. FPO or PO Boxes. I will ship within 3 business days. Sometimes sooner. It will be shipped by FedEX Ground. I will e-mail tracking numbers upon shipping. It will be packed very well.
|
|
|
This is used but in real god shape greenlee#5060249 Oiltite punch and die knockout 1-7/32 30.5mm GREENLEE USA
|
|
|
Greenlee 1 3/8" Round Radio Chassis Punch 730 No Reserve No Returns after 14 days.Will combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ebb780c8b-0x102-
|
|
|
Greenlee 1 1/4" Round Radio Chassis Punch 730 No Reserve No Returns after 14 days.Will combine shipping.
|
|
|
This auction for a greenlee set inncludes 3/4-2" punches and wratchet
|
|
GREENLEE Slug Buster 7306SB Knockout Punch and Hydraulic Driver- Conduit 767 Hello and thanks for checking out another great auction from Bermuda's Triangle! We hope you enjoy the photos and information presented herein. If you have any questions, feel free to contact us for a prompt and friendly response. Item: Please view the photos to see the very same item you will receive. This used Greenlee punch kit has most if not all of the original components present with the new kit. And possibly some extras as well. Might be missing a component or two, so check out the pics to make sure everything you need is here. We tested out the punch and it works fantastic. Make no mistake, this is a heavy duty tool that is engineered to be extremely durable. There are scrapes and nicks on the metal body, ... morebut everything works as it should. We guarantee you will be thrilled with the performance on this robust and dependable Punch& Driver unit from Greenlee. Any questions just ask. And thanks for your interest! Additional Info: Driver. Hand Pump, Slug-Buster Punches, Dies and Draw Studs for 1/2-Inch through 2-Inch Conduit, Adapter, Spacers, Kwik Stepper Step Bit and Plastic Case. Fast, easy and simple to operate. Compact design for field use on construction sites and maintenance jobs. Punches 10 times faster than wrench method. Will also drive 751 Cable Cutter head. Can be used with most standard round Slug-Buster and Slug-Splitter SC punches(not 1/2-Inch, 9/16-Inch, 5/8-Inch) Can be used with non-round punches(adapter may be required) 3-Foot hose. Powerful 11-Ton hydraulic ram. Terms and Return Policy: California residents please add 7.5% sales tax While we can accept returns for an undescribed flaw or error in the listing. NO RETURNS ARE PERMITTED FOR REASONS PERTAINING TO A CHANGE IN PERSONAL TASTE, PREFERENCE, OR OPINION. We encourage you to research the item you plan to purchase so you know what to expect when it arrives. When you commit to purchase the item, we commit to providing you with exactly what you purchase. T
|
|
|
Greenlee inch and a quarter knockout punch in working condition thanks for looking and happy bidding Posted with
|
|
This auction is for one(1) used Brewer-Titchener NM rated 6" stainless swivel snatchblock. As shown. The block has a maximum working load of 5,0 and is for 1/2" wire rope. The top shackle is marked"NM" and"5/8' Info on the label is as follows: Brewer-Titchener Star Brand Fig No. 4082 QK Size 6" Working Load Limit 5.000 LB Bearing GB Rope Size 1/2 WR Similar information is stamped on the side strap of the snatchblock. This item is used. There are signs of light wear. Though everything appears to work as it should. Now for the fine print: If you have questions. Please ask. Be certain this is what you want before you bid. No returns accepted on this item. PayPal required for payment. Unless the item is picked up in person. Then cash is acceptable. I try to ship ... morewithin 2 business days after receipt of confirmed payment. I ship to the United States only. Using the USPS. I can/ will use other shippers at the buyer's request and expense. If the"Buy it Now" is used the shipping is Free.
|
|
|
Barely used. Motor still under warranty. Comes with everything shown, no missing parts. Bought new 10/12. Going out of business, must sell. Posted with
|
|
|
Slightly used 600ft 5/8 inch pulling rope. Eyelets on both ends. Rope is almost new, just dirty from conduit. Going out of business, please see my other items listed for pulling equipment and sheaves. Posted with
|
|
|
Up for bid is a set of Greenlee conduit knockout punches. There are various sizes and part numbers including: 3/4" 7/32" 1 1/4" 3" 3 1/2" 500-4180, 741, 5004011, 5006974, 5006972, 501-4722, 500-5179, 730-K 5020826. The 3 1/2" has a small chip(see photo) all of the pieces have scratches and light surface rust. These come as is, and with everything that is pictured. Please ask any questions you might have. Make sure to look at the other tools that I currently have listed.
|
|
|
USED GREENLEE 7806SB KNOCKOUT PUNCH SET{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13ec6b1ab7a-0xf7-
|
|
|
Greenlee Round Knockout Punches 7/8inch and 3/4 inch punch and die set. This set has light surface rust. But I don't think it has ever been used.
|
|
|
This is a set of three Greenlee Round Knockout Punches 1 3/8 inch punch and die set. This set has light surface rust. But I don't think it has ever been used.
|
|
|
Greenlee Round Knockout Punches 1 1/2 inch punch and die set. This set has light surface rust. But I don't think it has ever been used.
|
|
|
Greenlee Round Knockout Punches 1 1/4 inch punch and die set. This set has light surface rust. But I don't think it has ever been used.
|
|
|
Used 3.4,5 inch Greenlee pulling sheaves. Some wear, but in great condition. Retail 600 each, selling as a set. Going out of business, please see my other items listed for pulling equipment and sheaves. Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13ec6b1ab9b-0x104-
|
|
|
Greenlee knockout hole punch 1 3/16" diameter. Used on 0.093" thickness aluminum, requires 3/4" pilot hole for draw stud
|
|
|
Greenlee knockout hole punch 3/4" diameter. Used for 0.093" aluminum.
|
|
|
Greenlee knockout hole punch 11/16" diameter. Used for 0.093" aluminum.
|
|
PRODUCT CONDITION: THIS ITEM IS IN EXCELLENT CONDITION. MAY HAVE BEEN A STORE DISPLAY OR HAD MINIMAL USE. IT IS FULLY FUNCTIONAL AND COMPLETE. USUALLY INCLUDES ORIGINAL PACKAGE WHAT'S INCLUDED& PRODUCT FEATURES: INCLUDES: PUNCH FEATURES: Durable all-metal construction for long-term performance. Soft-touch padded handle for everyday comfort and ease-of-use. Centamatic feature for accurate centering of paper and confident. Clean presentations. Flexible: accepts up to seven semi-adjustable punch heads. Punches up to 32 sheets of 20 lb. paper Live in the Toronto area? Local pick up available( $5 pick up fee per item applies. See below for further pick up information) STOP PAYING RETAIL. Shop SabbaShop! ü All auctions are no reserve and start at 0.18 cents ü SabbaShop liquidates ... morenew and used items. Overstocks, open-box, store returns, shelf-pulls, store displays and more at up to 90% off retail prices ü These are the same items you'll find in big box department stores. Only at a fraction of the cost ü Our loyal customers keep coming back for the unbeatable prices. Wide product variety& fast, friendly customer service. Click below for: Local Pick Up Information& Schedule Shipping Policy& Combined Shipping Discount Customer Service& Refunds Policy Manufacturer Warranty: SabbaShop liquidates new. Used, overstock, open-box, returns, shelf-pulls or store display items. Some items may be new in box. However SabbaShop is in no way affiliated with the manufacturer. The item does not carry any manufacturer warranty. Even if sold as new 200634 Powered by
|
|
|
1-888-9WEC2IT(993-2248) Problem? Greenlee 1806 1804 Ratchet Knockout Punch Driver Ex-Cell-O. Item Description. Manufacturer Greenlee, Model Number 1806 1804, Category Industrial Hand Tools Ratchet(Socket Wrench) Cosmetic Wear Signs of light use. But tools are in good shape. Functional Condition Great working condition. Items Included In Listing Everything as pictured. RNF113. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
|
|
|
THIS IS A USED GREENLEE 1" CONDUIT KNOCKOUT DIE SET. BOTH SLUG BUSTER AND DIE ARE IN EXCELLENT CONDITION WITH LOTS OF LIFE LEFT. THESE DIES CAME FROM 1 OF MANY INCOMPLETE SETS THAT I WILL BE LISTING. CHECK OUT MY OTHER AUCTIONS FOR COMBINED SHIPPING. Posted with
|
|
|
Greenlee and Enerpac assortment of knockouts. 2) 2" punch and dies. 2) 1" punch and dies, 1) 3/4" punch and die. All are used with moderate wear. Please contact me if you have any questions. Payment is to be made within 3 days of auction end. Item will be shipped ounce payment is made.
|
|
|
THIS IS A USED GREENLEE 1 1/4" CONDUIT KNOCKOUT DIE SET. BOTH SLUG BUSTER AND DIE ARE IN EXCELLENT CONDITION WITH LOTS OF LIFE LEFT. THESE DIES CAME FROM 1 OF MANY INCOMPLETE SETS THAT I WILL BE LISTING. CHECK OUT MY OTHER AUCTIONS FOR COMBINED SHIPPING. Posted with
|
|
|
Greenlee assortment of Draw Studs. All studs are in good shape. All threads are clean. One ball bearing does slide off of bolt. 3) 3-1/2" Long by 3/4" 6) 2-3/4" Long by 3/4" 3) 2-5/8" Long by 3/8" 3) 2-3/4" Long by 3/8" 2) 2-1/2" Long by 3/8" with nuts. Please contact me if you have any questions. Payment must be made within 3 days after auction ends. Item will be shipped ounce payment is received.
|
|
|
This Greenlee 9 Pc. Slugsplitter Heavy Duty Stainless Steel Knockout Set is now up for auction! There are 2-3/4's and 2-1/2" knockout's! The kit is in KILLER shape! NO STUDS! GOOD LUCK!
|
|
|
THIS IS A USED GREENLEE 1 1/2" CONDUIT KNOCKOUT DIE SET. BOTH SLUG BUSTER AND DIE ARE IN EXCELLENT CONDITION WITH LOTS OF LIFE LEFT. THESE DIES CAME FROM 1 OF MANY INCOMPLETE SETS THAT I WILL BE LISTING. CHECK OUT MY OTHER AUCTIONS FOR COMBINED SHIPPING. Posted with
|
|
|
GREENLEE 1-7/32 punch and die#5005180/5005179. GREENLEE 3/16" NOTCH punch and die#5020826. This set is perfect for installing oil-tight fixtures in enclosures. As you know the notch can be difficult to make. But with this greenlee tool, it knocks it out for you. It is so much faster! This set is in good working condition. Please contact me if you have any questions. Payment is to be made within 3 days of auction end. Item will ship ounce payment is received.
|
|
|
GREENLEE and ENERPAC knockout set 1/2" 2" This is a"mixed" set of punches and dies. All are in good shape and in a GREENLEE plastic case. Please contact if you have any questions. Payment is to be made within 3 days of auction end. Item will ship ounce payment is received.
|
|
|
GREENLEE PUNCHOUT SET* MODEL: 7306 767 PUMP SET IS USED WITH HEAVY SIGNS OF WEAR COMES WITH EVERYTHING SHOWN IN PICTURES METAL CASE IS RUSTY FEEL FREE TO ASK QUESTIONS INSURANCE AVAILABLE UPON REQUEST ONLY SEE PICTURES FOR COSMETIC CONDITION& FURTHER DETAILS
|
|
|
Just found! Nice used condition. Leather good with solid strap. Please check photo and ask any questions as not familiar with this set. Have priced it quite low based on other listings. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13ed5f43f14-0xf0-
|
|
|
Very good quality badge made from tool steel 1.2379. Stamp is cured. The hardness of 56-60 HRC stamp. Often you can use to work in the steel without the use of the stamp. Figure RAM compatible with the original(for size) Dimensions shown: Height 7mm Width 4.5 mm. Size of stamp: 10X10X65 mm. More photos send an e-mail. Please see my other auctions of large selection of dies.
|
|
|
1-888-9WEC2IT(993-2248) Problem? MPC Techni-Tool 8-Pc Punch Set. Item Description. Manufacturer MPC, Model Number Techni-Tool, Category Business& Industrial Light Equipment& Tools Hand Tools Knockout& Punch Sets Punches& Dies, Cosmetic Wear Items are used and have light engraving on them from prior use. Light discoloration and generals signs of normal use. Functional Condition Functional, Items Included In Listing MPC Techni-Tool 8-Pc Punch Set w/ Case- as pictured. LMC012. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
|
|
|
Up for auction is a used transducer simulator 4 this item was bought at auction and comes as is Posted with
|
|
|
I don't know much at all about these items. So I am just assuming the boxes are correct, but there are a couple oddballs here so perhaps they do not all match the boxes. They weigh 3.5 pounds before packing. They will fit in priority envelope.
|
|
|
About 12" long. Used condition. Heavy duty with one die set for 9/32" Shipping at $12. Posted with
|
|
|
EXACTLY AS PICTURED! ANY QUESTIONS. PLEASE ASK! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13edeea02f6-0xf7-
|
|
|
Used less than 10 hours. Motor/drill has 5 year warranty from Milwaukee. Comes with everything shown, no missing parts. Posted with
|
|
For sale is a Model 7706SB Greenlee Slug Buster Quick Draw Hydraulic Knockout Punch Flex Set. It has very little use. Most of the cutters have never been used. It comes with everything you see in photos& nothing more. The plastic molded case handle& manual is missing. I guarantee this KO set to function flawless& in 100% working condition. However no warranty is applied. With the small diameter ram& the flexible hose. It can fit in tight areas of panelboards& junction boxes where the standard rams will not fit. It will cut 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" holes, sized for electrical fittings. This Greenlee KO set still has the factory lubricant on most parts. You will not find another set for this price. For the cost to replace the hydraulic pump ... morewill pay for this complete set! The buyer will be very pleased& satisfied with this set. I also have two heavy-duty hydraulic crimping tools listed as well. Please e-mail me for any questions that you may have. Thanks for looking! PayPal Only! Local pickup in the New Orleans area is accepted with cash payment only! No International Shipping! I will only ship to the Lower 48 States. I will ship to a confirmed address only! No 3rd party shipping. No APO. FPO or PO Boxes. I will ship out in 3 business days or less after payment is received. Shipping by FedEX Ground. I will e-mail tracking numbers upon shipping. It will be packed very well.
|
|
MATCO PUNCHES Features: MATCO PUNCHES SET PS65A& PP66A 5" 5 1/4" Shows normal signs of wear/ dirty. Item comes as pictured. Photos are of actual auction item The auction comes with everything pictured above. If it is not pictured. We DO NOT have the item. Note that all of our items are purchased second hand. They made need some cleaning/dusting/tune-ups. Anything major should be listed above. Please contact us with any problems before leaving feedback. Customer service/satisfaction is very important to us and we will do whatever we can to make the situation right to make sure you are 100% taken care of and satisfied. We strive to be a 5 star seller. If you feel we did less then a 5 star job. Please let us know so we can make things right. Let us know what we can do to be a 5 ... morestar seller for you! NO INTERNATIONAL SHIPPING. PLEASE DON'T ASK. Payment by paypal within 72hrs after completed auction. Item will ship within 1 business day after payment clears. Any extra shipping over $5.00 paid by buyer VS actual shipping cost will be refunded back to buyer. If you have any comments or questions please contact us through the"ask seller a question" link on this auction
|
|
|
vintage bost hole punch-6 holes. bost no 238. 8 1/2" long.
|
|
|
GREENLEE'D' 25-RSR232 KNOCKOUT/PANEL PUNCH. Used once.
|
|
Up for sale a Heavy-duty Americraft Hand Tools 950 Gasket Hole Punch Set.11 Piece. This complete set is made in USA by A& E Mfg. Co. It is Designed to cut holes and internal radii in gaskets and other soft material such as rubber. Lead foil, linoleum, felt fiber and other similar materials. The set includes 10 Punchs: 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8, 3/4" 7/8" and 1 inch, And a mandrel. The set is contained in plastic case. That latches. The approx. gross weight is 1.75 pounds& The set is in an excellent condition with very minor stains.Surface scratches& blemishes& is sold AS IS. If you are not fully satisfied.We will refund only the cost of the item.Shipping& handling both ways are the responsibility of the buyer. Payment Information: ... morePayPal is the only method of payment.The buyer must have a confirmed PayPal address. SHIPPING The item will be carefully packed& will be shipped within 1-2 business days from receipt of cleared payment. Returns are accepted within 14 days after receiving the item. Our shipping& handling costs will not be refunded and return shipping is also the responsibility of the buyer
|
|
Greenlee knockout cutter die set#735 leather case clean condition complete Description This is a Greenlee electrical knock out cutter die set complete in its original leather case. It is the best way to add knock outs to any electrical box. Sub panel or breaker panel. Includes 1 1/2 11/4 1" 3/4" 1/2" dies. Check out the photos. Check out our eBay Store for an ASTOUNDING variety of fantastic stuff! Just click here: PLUS check our feedback to see how our customers LOVE us. All questions are happily and promptly answered: We will resolve ANY PROBLEM to your satisfaction. Our TOP NOTCH REPUTATION means more to us than any one single sale. So PLEASE contact us about ANYTHING you are concerned about before leaving feedback. ~Thank You~ PUERTO RICO. HAWAII AND ALASKA MUST WRITE FOR ... moreSHIPPING COSTS. EXTRA CHARGES WILL APPLY We ship within 1 business day of completed payment. Shipping Cost: Free to the USA Winning buyer please pay with Paypal within 24 hours of auction close or contact us if you need to make other payment arrangments. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. If you have any questions ask before bidding. And Thank You for trusting us with your purchase. We do try to be as descriptive and accurate as possible and include plenty of photos. If you have ANY questions or problems with your purchase be sure to contact us. We will always work hard to solve the problem and find an equitable solution. Also. We are able to resolve issues much faster than either Ebay or Paypal can
|
|
|