|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Ontario, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. - 220V output current (actual): CUT 50A TIG 170A MMA 170A. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
0 bids Free Shipping
Condition: New Location: Bordentown, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
Buy It Now
Free Shipping
Condition: New Location: Bell Gardens, United States
【Powerful Cutting】With advanced IGBT inverter technology, 50/60Hz high frequency, 60% duty cycle. 12mm ideal clean cut and 21mm maximum severance cut under 220V, 8mm ideal clean cut and 10mm maximum severance cut under 110V.
0 bids Free Shipping
Condition: New Location: Ontario, United States
The energy-saving can reach up to 50% as well as efficiency is increased by 30%. Able to operate when the external air pressure is too high. Equipped with LCD digital display and portable handle make it very easy to use and carry.
Buy It Now
Free Shipping
Condition: New Location: Indianapolis, United States
The installation of a Motor Guard Filter on the Plasma Cutting system downstream of the air regulator will effectively remove the contamination from the compressed air line. This eliminates the "sputter" from the arc, restoring the plasma system to maximum cutting efficiency, and dramatically reducing the corrosive wear on the tip and electrode.
0 bids Free Shipping
Condition: Used Location: Westfield, United States
If you're not fully satisfied.
0 bids Free Shipping
Condition: New Location: Bordentown, United States
1X Plasma cutter HVC50. 【HF TOUCH CUTTING】: This 110/220v plasma cutter machine uses simple touch cutting torch, and keep high efficient cutting mode. Cutting thickness. switch type. Material that can be cut.
Buy It Now
Free Shipping
Condition: New Location: Indianapolis, United States
If you're considering Oxy Acetylene cutting, look no further than the Hobart AirForce 12ci Plasma Cutter with Air Compressor (500564) and take the step into Plasma. Weighs only 27 lbs. • 5/3/1 Industrial Warranty.
Buy It Now
Free Shipping
Condition: New Location: Hicksville, United States
Hypertherm AIR T30 Deflector 30A Powermax 30 AIR Plasma. Amperage: 15-30. Torch Type: Hand.
0 bids $22.00 Shipping
Condition: New Location: Ontario, United States
1pcs NEW HBC45 Non Touch Pilot Arc Plasma Cutter. HITBOX 45Amp Plasma Cutter Non Touch Pilot Arc Inverter 110V 220V Non-HF Cut Machine. 1pcs Non HF Cutting Torch. 1pcs Gas Tube.
Buy It Now
Free Shipping
Condition: New Location: Santa Fe Springs, United States
Buy It Now
Free Shipping
Condition: New Location: Santa Fe Springs, United States
0 bids Free Shipping
Condition: New Location: Ontario, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
0 bids $7.00 Shipping
Condition: New Location: Bordentown, United States
HITBOX 45Amp Plasma Cutter Non Touch Pilot Arc Inverter 110V 220V Non-HF Cut Machine. 1pcs NEW HBC45 Non Touch Pilot Arc Plasma Cutter. 1pcs Non HF Cutting Torch. 1pcs Gas Tube.
Buy It Now
$3.00 Shipping
Condition: New Location: Ontario, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. - 220V output current (actual): CUT 50A TIG 170A MMA 170A. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
Buy It Now
Free Shipping
Condition: Used Location: , United States
💯 Air PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost. 💯 SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. 💯THE COMPATIBLE CONSUMABLES SETS for this green Color Plasma Cutter are "pt31" . Please search "pt31 or "cut50". 💯SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
HITBOX Air Plasma Cutter 55A Cut 15mm Inverter 110V 220V Cutting Machine HBC5500. The energy-saving can reach up to 50% as well as efficiency is increased by 30%. Able to operate when the external air pressure is too high.
Buy It Now
Free Shipping
Condition: New Location: , China
These Spacer Guide protect for plasma cutting machines. 10 x Spacer Guide. Size:24 x 26 x 22mm. Application:such as for CUT-40,CUT50,CUT60,CUT-40D,CUT-50D,CUT-60D,LGK40,CT312,CT312D,CT416,CT416D,CT518 etc.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Technology：IGBT&Inverter. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve the user experience. IGBT technology makes the body light and easy to carry.
Buy It Now
Free Shipping
Condition: New Location: Baldwin Park, United States
The new and improved model makes it more convenient and easier to use. Maximum Severance Cutting Thickness: 1.0 in. 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1.0". Type: DC Air Plasma Cutter.
Buy It Now
Free Shipping
Condition: New Location: Monroe, United States
We are an AUTHORIZED HYPERTHERM DISTRIBUTOR serving the area for over 25 years. Harris Welding Supplies has been family owned and operated for 25 years. Hypertherm Basic Circle Cutting Guide 127102.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
HITBOX Air Plasma Cutter 55A Cut 15mm Inverter 110V 220V Cutting Machine HBC5500. OUTSTANDING PERFORMANCE - The maximum cutting thickness of this plasma cutter is 15mm, and the clean cutting is 12mm.
0 bids Free Shipping
Condition: New Location: Ontario, United States
HITBOX 45Amp Plasma Cutter Non Touch Pilot Arc Inverter 110V 220V Non-HF Cut Machine. 1pcs NEW HBC45 Non Touch Pilot Arc Plasma Cutter. 1pcs Non HF Cutting Torch. 1pcs Gas Tube.
Buy It Now
Free Shipping
Condition: New Location: , United States
Compatible with 40A, 50A plasma cutting machine PT31 torch standard, flexible and neck. Applicable : Suitable for 40A and 50A. Plasma cutter torch adopts humanized design, straight handle, comfortable to hold and easy to use.
0 bids Free Shipping
Condition: New Location: Bordentown, United States
Why you choose CT520?. IGBT inverter & 2T 4T Function: Hitbox CT520 inverter welder uses secondary inverter technology and pure square wave output, does not penetrate thin plate. Concentrated heat, strong reverse cleaning capacity, wide cleaning range, continuous arc.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
HITBOX Air Plasma Cutter 55A Cut 15mm Inverter 110V 220V Cutting Machine HBC5500. The energy-saving can reach up to 50% as well as efficiency is increased by 30%. Able to operate when the external air pressure is too high.
0 bids Free Shipping
Condition: New Location: Bordentown, United States
【HF TOUCH CUTTING】: This 110/220v plasma cutter machine uses simple touch cutting torch, and keep high efficient cutting mode. 1X Plasma cutter HVC50. Cutting thickness. 1X Cutting torch. switch type.
0 bids Free Shipping
Condition: New Location: Ontario, United States
1pcs NEW HBC45 Non Touch Pilot Arc Plasma Cutter. HITBOX 45Amp Plasma Cutter Non Touch Pilot Arc Inverter 110V 220V Non-HF Cut Machine. 1pcs Non HF Cutting Torch. 1pcs Gas Tube.
0 bids $5.00 Shipping
Condition: New Location: Bordentown, United States
Why you choose CT520?. IGBT inverter & 2T 4T Function: Hitbox CT520 inverter welder uses secondary inverter technology and pure square wave output, does not penetrate thin plate. Concentrated heat, strong reverse cleaning capacity, wide cleaning range, continuous arc.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
HITBOX 45Amp Plasma Cutter Non Touch Pilot Arc Inverter 110V 220V Non-HF Cut Machine. 1x NEW HBC45 Non Touch Pilot Arc Plasma Cutter. 1x Non HF Cutting Torch. 1x Gas Tube.
0 bids Free Shipping
Condition: New Location: Bordentown, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
【HF TOUCH CUTTING】: This 110/220v plasma cutter machine uses simple touch cutting torch, and keep high efficient cutting mode. 1X Plasma cutter HVC50. Cutting thickness. switch type. Material that can be cut.
Buy It Now
$6.99 Shipping
Condition: New Location: Clayton, United States
24 VOLT DC BRASS SOLENOID VALVE FOR AIR OR GAS. FOR PLASMA CUTTERS AND WELDERS. 1/8" PIPE INLET AND OUTLET.
0 bids Free Shipping
Condition: New Location: Concord, United States
【Cooling Fan】Cooling fan is very important in the working of plasma cutting. Bigger cooling fan will let the machine work longer. Our cooling fan is 20% bigger than competitors. Better performance!
0 bids Free Shipping
Condition: New Location: , United States
Compatible with 40A, 50A plasma cutting machine PT31 torch standard, flexible and neck. Applicable : Suitable for 40A and 50A. Plasma cutter torch adopts humanized design, straight handle, comfortable to hold and easy to use.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
This torch consumable is compatible with the P80 plasma torch and similar products for CUT-70 CUT-80 CUT-100 CUT-120 plasma cutting machines. The electrode is made of oxygen-free copper and embedded with high-quality hafnium (zirconium in the DIY version).
Buy It Now
Free Shipping
Condition: New Location: , United States
Manufacturer: ARCCAPTAIN. Non-Touch Pilot Arc FunctionThe ARCCAPTAIN 55A plasma cutter features a pilot arc function. It utilizes a high-frequency non-touch arc starting mode. Moreover, the plasma cutting machine only weighs 19.8LB & compact, we also provide a shoulder strap, make it easy to carry from one place to another.
0 bids Free Shipping
Condition: New Location: Ontario, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
Buy It Now
$13.98 Shipping
Condition: New Location: Ontario, United States
200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current. Multi-functions Welding & Cutting Machine with 2T/4T Cutting,2T/4T Tig, Pluse Tig and Arc function.
0 bids Free Shipping
Condition: New Location: Ontario, United States
HITBOX 4 in 1 Cut/TIG/MMA Non-touch Pilot Arc Air Plasma Cutter Welding Machine. IGBT inverter & 2T 4T Function: Hitbox CT520 inverter welder uses secondary inverter technology and pure square wave output, does not penetrate thin plate.
0 bids Free Shipping
Condition: New Location: , China
The consumables can work for ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, Super160, Super160P, etc.
Buy It Now
Free Shipping
Condition: New – Open box Location: Huntington Park, United States
P80 Air Plasma Cutting Torch Pilot Arc 3M/10FT Burner Holder CNC Auto Cutting/Manual Black Straight CUT 20mm. Wide Range of Applications: P80 plasma cutting torches, used for CUT60P, CUT65P, CUT50P, CUT55P, LGK-80 and other plasma cutter.
Buy It Now
Free Shipping
Condition: New Location: Greenwood, United States
S45 Plasma cutting torch body hand torch head Air cooled Rated Current:20~45A. Cutting Thickness:≤15mm.
0 bids Free Shipping
Condition: New Location: , China
Torch model: P80 / P-80. P-80 / P80 plasma cutting torch body. P80 plasma torch head WSP-01001 x 1 set. Economic versions plasma cutting torch body.
0 bids Free Shipping
Condition: New Location: , China
PT31/LG40 Air Plasma Cutter Cutting Torch Head 40A Inverter Plasma Cutter Torch Body With Max. Cut 12mm Cutting Tool. PT31/LG40 plasma cutter cutting torch. PT-31 Machine Torch Body. This Torch (Gun) Can Be Used For Machines Such As CUT-30, CUT-40, LGK40, CT-312,CT-416,MTC-120,MTC-120P,MTC-160, MTC-160P,Super160,Super-160P, etc.
Buy It Now
$0.20 Shipping
Condition: Brand New Location: , China
The SG-55 cutting head cutting 18MM thick plate under the current of 60A. This Spacer Guide Suitable for Plasma Cutter WSD-60P SG-55 AG-60. 5pcs Quality Spacer Guide For Air Plasma Cutter Cutting WSD-60P SG-55 AG-60.
0 bids Free Shipping
Condition: New Location: , United States
Model: AG60A. Plasma cutter torch is compatible with 60A plasma cutter PT31 torch standard, flexible and neck. Item Type: Plasma Cutter Torch. High frequency ignition, easy to start arc. Start the arc to start the plasma cutting torch.
Buy It Now
Free Shipping
Condition: New Location: Ogden, United States
0 bids Free Shipping
Condition: New Location: Concord, United States
【NON-TOUCH PILOT ARC】: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Better cutting quality and longer consumable life. 【Cooling Fan】Cooling fan is very important in the working of plasma cutting.
0 bids Free Shipping
Condition: New Location: , United States
Our products will your experience to unparalleled inspiration. Extended long plasma cutter tip electrodes and nozzles kit consumable for 40A plasma cutting machine CUT-40, LGK-40 plasma cutting. Include 10 pcs lengthened electrode, 10 pcs lengthened nozzle, 10pcs protective cover, 10 pcs shunt.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Buy It Now
$35.00 Shipping
Condition: New Location: Ontario, United States
1X Plasma cutter HVC50. Housing protection grade. Cutting thickness. Material that can be cut. 1X Cutting torch. 1X Gas tube. 1X Earth Clamp. product weight.
0 bids Free Shipping
Condition: For parts or not working Location: Oceanside, United States
The FlexCut 125 is an industrial-grade plasma cutter that draws input power from a 3-phase outlet. The FlexCut 125 cuts 1/4” mild steel at over 200 ipm! This kind of cutting capacity walks the line between the high definition plasma cutting industry and the conventional plasma cutting industry.
Buy It Now
Free Shipping
Condition: New Location: San Diego, United States
Plasmargon Air Plasma Cutter PLC 65P pilot arc IGBT Inverter DC CNC ONLY. A Total of 35 Pieces Plasma Cutter Consumables Set for Plasma CutterPlasmargon Air Plasma Cutter PLC 65P pilot arc IGBT Inverter DC CNC ONLY .
Buy It Now
Free Shipping
Condition: New Location: Indianapolis, United States
Buy It Now
Free Shipping
Condition: New Location: Wooster, United States
Part# 420399. Genuine Hypertherm Deflector. UPDATE: HYPERTHERM HAS UPADTED THIS PART AS OF 3/1/17 . INFO From Hypertherm: The change in material was made for greater robustness and life. For Powermax 30 AIR.
Buy It Now
Free Shipping
Condition: New Location: Sherman Oaks, United States
PT31 uses a red handle, which is more in line with the design of the human hand shape. PT31 is high frequency plasma torch.There are three color handles. PT31 BLACK HANDLE. PT31 BLUE HANDLE. PT31 RED HANDLE.
Buy It Now
$13.54 Shipping
Condition: New Location: , China
S45 Plasma cutting torch body hand torch head Air cooled Rated Current:20~45A. Cutting Thickness:≤15mm.
Buy It Now
Free Shipping
Condition: Used Location: , United States
💯 Air PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost. 💯 SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. 💯THE COMPATIBLE CONSUMABLES SETS for this green Color Plasma Cutter are "pt31" . Please search "pt31 or "cut50". 💯SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
0 bids Free Shipping
Condition: New Location: , United States
Max Cutting thickness: 4/5" mild steel severance. The machine is exquisite and portable, suitable for gift giving. Despite its small size,50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 4/5".
|
|
|
|