|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller: 1.5in Round Tube Rollers Weihgt:31.5kg This Product Can Only Bend Round Pipes or Round Steel 1.5 Inches and Below 1.5 Inches. If Additional Molds Are Purchased, They Can Be Bent into the Following Shapes: Flats Max. Capacity:1-1/4",Min. Radius: 10" C Channel Max. Capacity：1x2", Min. Radius: 60" Round Pipe Max. Capacity：1-1.5in , Min. Radius: 20" Round Tube Max. Capacity：2", Min. Radius: 60" Tube Max. Capacity：2", Min. Radius: 70" Rect. Tube Max. Capacity：1x2", Min. Radius: 60" Package Included: 1* Roll Bender.
0 bids Free Shipping
Condition: New Location: , United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller: 1.5in Round Tube Rollers Weihgt:31.5kg This Product Can Only Bend Round Pipes or Round Steel 1.5 Inches and Below 1.5 Inches. If Additional Molds Are Purchased, They Can Be Bent into the Following Shapes: Flats Max. Capacity:1-1/4",Min. Radius: 10" C Channel Max. Capacity：1x2", Min. Radius: 60" Round Pipe Max. Capacity：1-1.5in , Min. Radius: 20" Round Tube Max. Capacity：2", Min. Radius: 60" Tube Max. Capacity：2", Min. Radius: 70" Rect. Tube Max. Capacity：1x2", Min. Radius: 60" Package Included: 1* Roll Bender.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： Maximum Bearing Thickness: 5/16" / 8 mm Length of Handle: 44" / 112 cm Capacity: 5/16" x 1-1/4" / 8 x 32 mm or 1/4 x 2" / 6 x 51 mm Die size （Bending Radius）: 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" (25 mm, 30 mm, 40 mm, 45 mm, 50 mm, 65 mm, 75 mm) 4 Mounting Holes: 5/8" / 21 mm Maximum Bearing Width: 5/16 " / 8 mm Maximum Storage Width: 1-15 / 16 "/ 48 mm Package Included： 1 X Manual Pipe Bender 2 X Mounting Pins 4 X Mounting Screws 7 X Dies All Accessories for Use Notes Please allow the slight color difference caused by the shooting light and 1-3 cm or mm error due to manual measurement, and make sure you do not mind before ordering.
0 bids Free Shipping
Condition: New Location: Chino, United States
Material: No.45 Steel, Q235 Steel, Cast Iron Process: Stamping, Cutting, Welding, Spraying Color: Red Style: Modern Assembly Required: Yes Hydraulic Oil Model: No.15 Hydraulic Oil Density: 1000g/cm³ Max. Working Pressure: 16T Stroke: 235 mm / 9.25 in Adjustable Height: 360-595 mm / 14.17-23.43 in Bending Range: 1.3-7.6 cm/ 1/2 - 3 in Die Diameter: 1/2", 3/4", 1", 1-1/4", 1-1/12", 2", 2-1/2", 3" Product Size: 65*18*56 cm/ 25.59*7.09*22.05 in Package Size: 68*63*19 cm/ 26.77*24.8*7.48 in Gross Weight: 52 kg/ 114.64 lbs Net Weight: 50 kg/ 110.23 lbs Package Included 1* 16T Hydraulic Pipe Tube Bender 8* Dies 1* Hydraulic Rod 2* Screws.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
HARDENED STEEL CONSTRUCTION. WE HAVE A DEDICATED TEAM ON HAND AND ARE READY TO HELP! MOST HAND TOOLS ARE FULLY COVERED BY MANUFACTURER UNLESS OTHERWISE STATED. POWER TOOLS ARE ALSO COVERED BY MANUFACTURER'S WARRANTY AND ARE USUALLY HONORED AT A SERVICE CENTER IN YOUR AREA.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
Model: 11487. Titan Tools. Bends copper, brass and other soft thin wall tubing. Hand Tools. Power Tools. Specialty Tools. If you have any difficulties with the manufacturer of the product, we will be happy to step in and assist on your behalf.
0 bids $12.00 Shipping
Condition: Used Location: Haddon Heights, United States
OEM TOOLS 25179 TUBE BENDER BENDS 1/4" - 5/16" - 3/8" SOLD AS IS. WORKS GOOD.
Buy It Now
Free Shipping
Condition: New Location: , United States
Can be used for copper, brass, aluminum and thin steel tube. Suitable for bending round copper tubes, aluminum tubes, copper tubes. 🛠️【High -quality】Using high -quality materials ABS and aluminum alloy, high hardness, corrosion resistance, not easy to break, high temperature resistance, long service life.
0 bids Free Shipping
Condition: New Location: Glassboro, United States
Make: Spiky. Joseph Fazzio, Inc. Surplus Division. Small orders are no problem. Model: Size 8.5-10. Your Best Work Starts Here™. Be sure to add us to yourfavorites list !
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Hydraulic Rebar Cutter Head (25 mm). ●Operated by hydraulic pump. California Prop 65. ●Supplied with R2 3/8 male coupler and dust cap. ●Open head for easy insertion of rebars. ●Blades made of high strength and heat-treated steel.
Buy It Now
Free Shipping
Condition: New Location: Pottstown, United States
Use to bend and form steel and chromyl tubing. 8 Ton Forming Jack.
0 bids Free Shipping
Condition: Used Location: Perry, United States
SK Tools 90449 Tri-Tube Bender 1/4 5/16 3/8 Green Handle. This is in good pre owned condition. No damage or flaws. Please see pictures. Any questions please ask. Usually ships next business day payment is confirmed. Very fast and secure shipping. Thanks for looking.
0 bids Free Shipping
Condition: New Location: , United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller: 1.5in Round Tube Rollers Weihgt:31.5kg This Product Can Only Bend Round Pipes or Round Steel 1.5 Inches and Below 1.5 Inches. If Additional Molds Are Purchased, They Can Be Bent into the Following Shapes: Flats Max. Capacity:1-1/4",Min. Radius: 10" C Channel Max. Capacity：1x2", Min. Radius: 60" Round Pipe Max. Capacity：1-1.5in , Min. Radius: 20" Round Tube Max. Capacity：2", Min. Radius: 60" Tube Max. Capacity：2", Min. Radius: 70" Rect. Tube Max. Capacity：1x2", Min. Radius: 60" Package Included: 1* Roll Bender.
0 bids Free Shipping
Condition: New Location: Chino, United States
Premium Pipe Tube Bender 1''-3'' Manual Tube Bender, with 7 Dies Tubing Metal US Free shipping from USA!!! Description： This product is a manual pipe bender for bending pipes and cables of various materials. Bending technology is one of the achievements of modern mechanical engineering technology. It can use the bending principle to bend the tube into a certain shape. This kind of pipe bender has a great effect. The pipe bender makes the pipe bends without wrinkles, which is an excellent tool for processing. Key Highlightss： Great Capacity: The telescopic handle can bends round or square bar material up to 5/8" thick with a maximum width of 1-15/16". Multiple Uses: It is designed for multiple uses. It can bend square or solid circular material in many ways. High-quali.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller: 1.5in Round Tube Rollers Weihgt:31.5kg This Product Can Only Bend Round Pipes or Round Steel 1.5 Inches and Below 1.5 Inches. Square Pipes and Channel Steel Cannot Be Bent. If Additional Molds Are Purchased, They Can Be Bent into the Following Shapes: Flats Max. Capacity:1-1/4",Min. Radius: 10" C Channel Max. Capacity：1x2", Min. Radius: 60" Round Pipe Max. Capacity：1-1.5in , Min. Radius: 20" Round Tube Max. Capacity：2", Min. Radius: 60" Square Tube Max. Capacity：2", Min. Radius: 70" Rect. Tube Max. Capacity：1x2", Min. Radius: 60" Package Included: 1.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller: 1.5in Round Tube Rollers Weihgt:31.5kg This Product Can Only Bend Round Pipes or Round Steel 1.5 Inches and Below 1.5 Inches. If Additional Molds Are Purchased, They Can Be Bent into the Following Shapes: Flats Max. Capacity:1-1/4",Min. Radius: 10" C Channel Max. Capacity：1x2", Min. Radius: 60" Round Pipe Max. Capacity：1-1.5in , Min. Radius: 20" Round Tube Max. Capacity：2", Min. Radius: 60" Tube Max. Capacity：2", Min. Radius: 70" Rect. Tube Max. Capacity：1x2", Min. Radius: 60" Package Included: 1* Roll Bender.
Buy It Now
Free Shipping
Condition: New Location: Camarillo, United States
Scroll Bending Attachment for Floor or Bench BenderBend 3/16'' x 1/2'' to 3/16'' x 1'' hot rolled flate steel
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Socpuro 180 Degree Tube Bender, 4 in 1 Manual Tubing Pipe Bender 3/16", 1/4", 5/16", 3/8" for Copper, Brass, Aluminum and Thin Steel Pipes. 【High-quality Material】Pipe bender is made of strong aluminium alloy structure, covered with high quality ABS plastic, high strength, corrosion resistant, to ensure long lasting durability.
0 bids Free Shipping
Condition: Used Location: Deltona, United States
Swagelok MS-HTB-8, - 1/2 in Hand Tube Bender. Handles are solid.
Buy It Now
$23.00 Shipping
Condition: Used Location: Mineola, United States
WITH OVER 40 YRS. WORKING - MANY NEW.
0 bids Free Shipping
Condition: New Location: , United States
🍃Specifications: Material: Alloy, 45# Steel Color: Blue, Yellow, Silver Bending Angle: 0~180° Applicable Tube Diameter: 3/8", 10MM Applicable Tube Wall Thickness: For Stainless Steel and Iron Pipe ≤ 2mm/0.078in Length of Handle: 44.5cm/17.52inch, 44cm/17.32inch Bending Die Size: 4.95*3.97cm/1.95*1.
0 bids Free Shipping
Condition: New Location: Brooklyn, United States
The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving.
0 bids Free Shipping
Condition: New Location: Chino, United States
Application It is widely used in many fields, including construction sites, plumbing, manufacturing, heating and sanitation facilities, garage and vehicle maintenance, and home decoration. It is suitable for soft tubes, copper tubes, aluminum tubes, soft iron and steel tubes, stainless steel tubes, and some very thin tubes with a wall of around 1mm. It is applicable to 3/4in pipe diameter Specifications Model: CT-364-12 Material: Aluminum and 45# Steel Color: Siver, Black Bending Angle: 0~180° Applicable Tube Diameter: 19mm/ 3/4" Handle Length: 51cm/20.1in, 71cm/28in Bending Die Size: 14*13.5cm/5.5*5.3in Packing Size: 74*14*8.5cm/29.13*5.51*3.34 Gross Weight: 2.7kg/5.95lbs Package Included 1 x Tube Bender.
0 bids Free Shipping
Condition: New Location: La Puente, United States
This Tube Bender Kit comes with 7 exchangeable bender heads of different sizes, 3 fixed supports, a pipe cutter and a deburring tool for cutting, trimming and bending copper pipes, aluminum pipes and other soft tubes, widely used for installing heating, pressure, annealing, HVAC, air conditioning, and hydraulic systems.
0 bids $75.00 Shipping
Condition: New – Open box Location: Bishopville, United States
SLIDE BLOCK FOR SIZES 14,16,18,20. RADIUS BLOCK SIZES.
0 bids Free Shipping
Condition: Used Location: Boulder, United States
This Greenlee 849 electric PVC heater and bender is a must-have for any business or industrial operation. With the ability to heat and bend pipes ranging from 1/2" to 2", this powerful tool is perfect for any pipe bender or heater needs. The Greenlee 849 is designed with a 120 VAC 20Amp power source, making it an efficient and reliable choice for any operation. The brand, model, and categories of this item are all top-of-the-line, ensuring that you are getting the best quality product possible. Don't miss out on the opportunity to add this amazing tool to your collection!
Buy It Now
$9.99 Shipping
Condition: Used Location: Escondido, United States
I will respond to you within 24 hours.
0 bids $7.45 Shipping
Condition: Used Location: Baton Rouge, United States
Vintage Ridgid #396 3/8” OD Tubing Tube Bender 15 / 16" Radius Great Condition
0 bids Free Shipping
Condition: New Location: Chino, United States
Our manual hydraulic pipe bender is made of high-quality materials with stable performance and durability and can withstand a maximum working pressure of 16 tons. Using our product can reduce your workload, improve your working efficiency, and help you complete your work easily and efficiently.
0 bids $7.00 Shipping
Condition: New Location: Chino, United States
Specification Maximum Bearing Thickness: 5/16" / 8 mm Length of Handle: 44" / 112 cm Capacity: 5/16" x 1-1/4" / 8 x 32 mm or 1/4 x 2" / 6 x 51 mm Die Size（Bending Radius） : 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" and 3"(25 mm, 30 mm, 40 mm, 45 mm, 50 mm, 65 mm, 75 mm) 4 Mounting Holes: 5/8" / 21 mm Maximum Bearing Width: 5/16 " / 8 mm Maximum Storage Width: 1-15 / 16 "/ 48 mm Package Included 1 X Manual Pipe Bender 2 X Mounting Pins 4 X Mounting Screws 7 X Dies All Accessories for Use.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller:1.5in Round Tube Rollers Weihgt:31.5kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： Maximum Bearing Thickness: 5/16" / 8 mm Length of Handle: 44" / 112 cm Capacity: 5/16" x 1-1/4" / 8 x 32 mm or 1/4 x 2" / 6 x 51 mm Die size （Bending Radius）: 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" (25 mm, 30 mm, 40 mm, 45 mm, 50 mm, 65 mm, 75 mm) 4 Mounting Holes: 5/8" / 21 mm Maximum Bearing Width: 5/16 " / 8 mm Maximum Storage Width: 1-15 / 16 "/ 48 mm Package Included： 1 X Manual Pipe Bender 2 X Mounting Pins 4 X Mounting Screws 7 X Dies All Accessories for Use Notes Please allow the slight color difference caused by the shooting light and 1-3 cm or mm error due to manual measurement, and make sure you do not mind before ordering.
0 bids $150.00 Shipping
Condition: Used Location: Bhavnagar Station Road SO, India
0 bids Free Shipping
Condition: New Location: Englishtown, United States
The EMT Bender's adjustable angle guide allows you to create precise bends up to 90 degrees. The EMT Bender is a versatile and essential tool for electricians and DIY enthusiasts. It's designed to make bending electrical conduit easy and precise, ensuring that your electrical systems fit together perfectly.
0 bids Free Shipping
Condition: New Location: , United States
Feature:Handheld bender for 1/8", 3/16" and 1/4" tubing.Made of durable material, and have a long service time.Creates tight bends without kinking.Technical Details:Material: MetalColor: BlueSize: 17x13.5cm/6.69x5.31"Package Contains: 1 pcs tubing bender tool.
Buy It Now
Free Shipping
Condition: New Location: Belton, United States
This Lenox 3 in 1 Tube Bender is a versatile tool that can handle copper tubes of various sizes, including 1/4", 5/16", and 3/8". The bender is manual in power source and is designed for easy use. With its durable construction and high-quality brand name, this bender is a reliable choice for any professional or DIY project. The unit quantity is one, and the model number is LXHT82257. This tool is perfect for those in the business and industrial industry who need a reliable pipe bender for their projects.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Quantity: 5pcs. Can be used as connector for copper tube, aluminum tube, stainless steel tube of thin wall of air condition or refrigerator. Easily bending soft tube without kinking the tube. 5pcs/Set Spring Bending Tube Kit.
Buy It Now
Free Shipping
Condition: New Location: Pottstown, United States
The Eastwood Hydraulic Tubing Bender is a high quality, precision tool capable of creating accurate, smooth, kink-free bends, up to 180 Degree in aluminum, steel and stainless steel tubing, in sizes ranging from 3/4" to 2" with available Eastwood Die Sets.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
1 Roll Bender. Standard Roller:1.5in Round Tube Rollers. Quice Change the Lower Roller. Square Pipes and Channel Steel Cannot Be Bent. Round Pipe Max. Capacity：1-1/2", Min. Radius: 20". Round Tube Max.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller:1.5in Round Tube Rollers Weihgt:31.5kg .
Buy It Now
$75.00 Shipping
Condition: New – Open box Location: Bishopville, United States
SLIDE BLOCK COMBO 4-12. RADIUS BLOCK SIZES SIZE 10 X 2-1/2" #550583.
Buy It Now
Free Shipping
Condition: Used Location: Alameda, United States
What you see is what you get.
Buy It Now
Free Shipping
Condition: New Location: Dayton, United States
This industrial tubing bender is specifically designed for dealing with square and rectangular tube bending process. It is able to be utilized to process mild steel, copper and aluminum. It is made of high-hardened steel, adopts triangular base, convenient long handle and thickened screw rod for durability and stability.
Buy It Now
Free Shipping
Condition: Used Location: Phelps, United States
0 bids Free Shipping
Condition: New Location: , United States
Specifications: Material: Alloy, 45# Steel Color: Black, Silver Bending Angle: 0~180° Applicable Tube Diameter: 5/8", 16MM Applicable Tube Wall Thickness: For Aluminum Tube and Copper Tube ≤ 1mm/0.04in Length of Handle: 46cm/18.11inch, 63cm/24.8inch Bending Die Size: 11.5*9.5cm/4.5*3.74inch.
0 bids $10.99 Shipping
Condition: Used Location: Decatur, United States
Imperial Eastman 120-F Flaring Tubing Tool KitMade in USAHave been usedCase has “HAMILTON” written on itPlease study the pictures carefully. I do my best to show the items in their true form.Item comes from a smoke-free home.Payment due within 48 hours of close of item.I do give refunds if the item you receive is not the item you purchased or the item was not received in the condition it was advertised.Please see refund policy for details.I ship to U.S. only.Your feedback is important to me.Thanks for looking!
0 bids Free Shipping
Condition: New Location: , United States
This tubing bender is capable of easily making up to 180 degree bends in a variety of materials, including copper, brass, aluminum and steel tubing. 3-in-1 180 Degree Heavy Duty Tubing Bender Tool. Includes: 1 x tubing bender.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Length: 21cm (Approx.). Quantity: 5pcs. Easily bending soft tube without kinking the tube. Suitable for fast, free-form bending of soft copper and aluminium tubes. 5pcs/Set Spring Bending Tube Kit.
Buy It Now
Free Shipping
Condition: New Location: , United States
[Cable Bender Tool] Fits most wires, maximum bend of 500 MCM. Connects to standard 1/2″ ratchet, useful for residential wiring services. [Great Features] Work with 1/2" ratchet, wire can be easily bent by jamming into groove of this tool.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
This 2-in-1 tube bender gives you the power to bend 1/2 in. Tubing as thick as is no problem for this easy-to-use tube bender! 180 Degree 2 in 1 Copper Aluminum Pipe Tube Bender for tubing up to 18 gauge thickness 15mm- 22mm OD.
0 bids Free Shipping
Condition: Used Location: Baytown, United States
Swagelok MS-HTB-8 1/2 in Hand Tube Bender
Buy It Now
Free Shipping
Condition: New Location: Brentwood, United States
The cable bender features a breakaway link for durability and high strength for tough jobs, and a slim handle makes it easy to bend cables in tight, hard-to-reach places.Anodized hard coating for durability.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Length: 21cm (Approx.). Quantity: 5pcs. Easily bending soft tube without kinking the tube. Suitable for fast, free-form bending of soft copper and aluminium tubes. 5pcs/Set Spring Bending Tube Kit.
0 bids Free Shipping
Condition: New Location: , United States
Feature: 1. This tube bender is made of high quality steel material, strong hardness, not easy to rust, and in use. This tube bender is made of high quality steel material, strong hardness, not easy to rust, and in use.
Buy It Now
Free Shipping
Condition: Used Location: Saint Cloud, United States
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
VERSATILE HVAC TOOL KIT: Our Compact Tubing Bender Kit handles various soft tubing materials like copper, aluminum, brass, and steel effortlessly. EFFORTLESS OPERATION: This Tubing Bender Kit simplifies tube bending with a universal crossbar and color-coded mandrels for easy size identification.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model RIDG 36117. Ridgid 36117 Includes Ridgid 36117 Specifications Ridgid 36117 Features • Offset cushion grip handles for comfort when forming 180 degree bends. A 90 degree start angle and unique oil absorbing shoe minimize bending effort while forming accurate bends in copper, steel, and stainless steel tubing.
0 bids $24.00 Shipping
Condition: Used Location: Easley, United States
Swagelok Tube Bender MS-HTB-8. Condition is Used. Shipped with USPS Priority Mail Large Flat Rate Box.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specifications: Model:tr-60 Roller Adjustment: Manual Pinch: Single Material:iron One Set Rolle Dliveriedi with Machine Quice Change the Lower Roller Supplied Many Optional Rollers for Choice With Large Capacity Standard Roller: 1.5in Round Tube Rollers Weihgt:31.5kg This Product Can Only Bend Round Pipes or Round Steel 1.5 Inches and Below 1.5 Inches. If Additional Molds Are Purchased, They Can Be Bent into the Following Shapes: Flats Max. Capacity:1-1/4",Min. Radius: 10" C Channel Max. Capacity：1x2", Min. Radius: 60" Round Pipe Max. Capacity：1-1.5in , Min. Radius: 20" Round Tube Max. Capacity：2", Min. Radius: 60" Tube Max. Capacity：2", Min. Radius: 70" Rect. Tube Max. Capacity：1x2", Min. Radius: 60" Package Included: 1* Roll Bender.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Package Included: 1* Roll Bender.
|
|
|
|
Hi there bidders bought this bender then found out it would not bend exhaust pip but it will bend schedule 40 and 80 pipe. It comes with 6 dies for bending 6 or 7 dies can't remember but the dies alone are worth over 1000.00. This machine has been used once since I got it so its new. I will drive to meet with in 100 miles for fuel any questions just call and or text 13085208603 Posted with
|
|
Imperial Eastman 1/2" Pipe Bender. 364 FHB 1-2, Made in USA click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge Description: Made in USA This is a used Imperial Eastman Pipe Bender. 1/2" The part number 364 FHB 1-2. It is in great working condition. Be sure to enlarge all the photos for a lot of detail. The pictures are of the actual item listed. Thanks for looking and check my feedback and buy with confidence. I strive for 5 star feedback. So if you have ANY questions please ask. Be sure to check out other items in my store and my current auctions. Please see the photos as they are sometimes better at describing condition that I am. Please note that I will always ... morecombine on shipping whenever possible to keep costs down. Shipping will be via USPS first class mail. USPS Priority mail or FedEx home delivery. International Priority Mail only if out of the USA. I am sorry to say I will not use USPS small flat rate boxes or envelopes anymore on international shipments due to loss by USPS which causes me to loose the item and the money, so if you are an out of USA buyer, YOU will HAVE to pay for regular USPS Priority Mail, NO EXCEPTIONS. I also mark all customs documents with the FULL payment price, no exceptions, no gifts, you will pay the customs fees as per the rules. I accept PayPal only. Payment is due in 3 days from end of auction. USPS insurance available upon request and at additional USPS cost. Please be sure to Check out all of my other items! Shipping: I ship the next business day after receipt of payment on all items except very large items which might take an extra day at most. You will receive an email with a tracking number when I have generated your shipping label. Thanks. Harley. Payment: Paypal only with payment due in 3 days. inkfrog terapeak. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
|
|
GB Electrical Inc PVC Hot Blanket BB-2030 BB2030 2" 3" 690W 120V 6.3 Amps Condition: NEW. In box NEW. No box NEW. Old inventory XX, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: Been held in storage SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise ... morediscussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, ea
|
|
|
Swagelok 1/2" Hand Tube Tubing Benders 1-1/2" Radius MS-HTB-8. 1466 Posted with
|
|
MAINLAND VALVE& FITTING. INC. INDUSTRIAL WHOLESALE SUPPLY MAINLAND VALVE& FITTING IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS. YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS. Be sure to add me to your favorites list! YOU ARE LOOKING AT ONE(1) OF THE FOLLOWING: Lot Description: YOU ARE LOOKING AT ONE TUBE BENDER IMPERIAL TUBING BENDER 1/4" MODEL 364FHB 1-4 DISCOUNT ON SHIPPING AND HANDLING FOR MULTIPLE ITEMS SHIPPING WEIGHT: 2 LBS( These products are represented as USED SURPLUS) IF YOU HAVE ANY QUESTIONS. PLEASE CONTACT US AT: Customer Service Check out my other items! Be sure to add me to your favorites list! Bid High& Bid Often THANK YOU. COME AGAIN ... morePlease note: In some cases we will use the same picture for multiple listings of the exact same item. Please keep in mind that you will receive the same product of the same or better quality as pictured. Our office hours are M-F. 8-5 cst. We will respond to any questions you have on the following business day. INVESTMENT RECOVERY*SURPLUS INDUSTRIAL WHOLESALE SUPPLY* Terms& Conditions: Mainland Valve& Fitting. Inc. is a wholesaler of surplus industrial equipment. All products represented by Mainland Valve& Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture. No manufacture warranty or any warranty is expressed or implied. All products represented by Mainland Valve& Fitting, Inc. that is noted as factory new are factory new and are warranted only by the manufactures warranty. No other warranty is expressed or implied. All Names, Logos, Description& other related information are trademarks of their respected companies. All information listed herein is. To the best of our knowledge, believed to be correct. All material is surplus, and we have no way of testing anything we sell. Please review the pictures carefully. All material noted as new surplus are unused and in as ne
|
|
|
USED ONE IMPERIAL CHICAGO# 364-FH 3/8" O.D 5/16" BENDING DEGREE 45-90-135-180
|
|
|
USED. BENDER HAS TWO CHIPS BROKE OFF SHOE. S/N: 0395-331. BENDS 1/2" TO 1-1/4" IPS. SEE PICS. APPROX. SHIP WEIGHT: 156 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. TW/PB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Ridgid Pipe Reamer(28192) No. 2-S Spiral Reamer(Inv.28192) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition ... moreto normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
UP FOR AUCTION GB Gardner Bender KOH540A THIS BENDER IS USED BUT STILL IN GOOD COSMETIC CONDITION IT WAS TESTED AND IT IS IN GOOD WORKING ORDER THE POMP HANDLE IS MISSING. THIS AUCTION INCLUDES PICTURED ITEM ONLY.
|
|
|
This is a Greenlee 885 5" Bender Shoe part No. 50156691. I also have other parts from this bender I am selling. Ships FREE to USA.
|
|
|
This is a Lot of Greenlee 885 Ben der Retaining Pins. There are 2#5019464 pins for large shoe to ram. 3# 50251848 pins for small shoe to ram and 2(ones with a little rust on them) pipe support removal pins# 5011046.3. I also have other parts from this bender I am selling. Ships FREE to USA.
|
|
|
Craftsman Spring type External tube bender set Steel Spring Tubing Benders are a simple and effective means of bending thin-wall tubing such as copper and aluminum without crimping or collapsing the pipe. The Tubing Benders are made from hardened and tempered spring steel with a zinc-plated finish. This set contains 6 popular bending sizes capable of making bends up to 180 degrees. For best results. Using one bender over the tube and an additional bender inside the tube. Set includes 1/4” 5/16” 3/8” 7/16” 1/2” and 5/8” tubing benders. This set has been used and doesn’t look the shiniest but works just fine. Shipping outside the USA will cost extra.
|
|
|
RIDGID 3/8" tube bender with 15/16" radius that has been used and but it is still in great condition. FREE SHIPPING TO THE 48 STATES.USA BIDDERS ONLY! Payment due within 48 hours after auctions end! Posted with
|
|
|
Full refund minus shipping charges if the item is returned in same condition. SHIPPING COST WILL NOT BE REFUNDED 10% restocking fee may apply Perfect Working Condition. Minor Scratches and Blemishes Throughout From Normal Previous Use Initialed MTE Please View Photos For Farther Description. Includes Pictured Items Only. 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e2dae76a9-0xfe-
|
|
|
Imperial 375-FS 45 Degree Wide Range Flaring Kit For 1/8" 3/4" Good Condition, Check out my! tb s9
|
|
|
Very nice Greenlee pump.CA tax for CA res Posted with
|
|
|
IN GOOD CONDITION GOULD 3/8 TUBING BENDER IF THE BUYER IS NOT 100% SATISFIED WITH PURCHASE. WE WILL GIVE FULL REFUND AS SOON AS ITEM IS RETURNED. BUYER PAYS RETURN SHIPPING UNLESS ITEM IS DEFECTIVE. BUYER MUST HAVE ITEM PAID IN FULL 7 DAYS AFTER AUCTIONS END. ALL SALES CONSIDERED FINAL 5 DAYS AFTER DELIVERY DATE. If you feel the need to leave negative feedback. Please contact us first to allow us to resolve your issue before doing so.
|
|
|
GREENLEE#860-3 PVC HEATING BLANKET FOR 2" 3" PIPE BENDING This is in good used condition! A smaller blanket is av ail able in a separate auction. Comes from a retired electrician. NO ENGRAVINGS! Please keep a eye on my auctions as I have just purchased a large amount of machinist tools and mechanic tools. I will be listing vintage collectible and like new tools along and other misc good items. PLEASE CHECK OUT MY OTHER AUCTIONS! 14.99 shipping and handling for the 48 continental states. INTERNATIONAL BUYERS& others please e-mail me for shipping charges. Payment to be made within SEVEN DAYS of auction closing. I COMBINE SHIPPING TO SAVE YOU MONEY!
|
|
|
GREENLEE#860-1-1/2 PVC HEATING BLANKET FOR PIPE BENDING This is in good used condition! A larger blanket is av ail able in a seperate auction. Comes from a retired electrician. NO ENGRAVINGS! Please keep a eye on my auctions as I have just purchased a large amount of machinist tools and mechanic tools. I will be listing vintage collectible and like new tools along and other misc good items. PLEASE CHECK OUT MY OTHER AUCTIONS! 12.99 shipping and handling for the 48 continental states. INTERNATIONAL BUYERS& others please e-mail me for shipping charges. Payment to be made within SEVEN DAYS of auction closing. I COMBINE SHIPPING TO SAVE YOU MONEY! o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e50a4fd92-0xfa-
|
|
|
Tube Bender Imperial Eastma n 600-F Manual With 3/4-3R Radius Block Die Made In USA Thanks for looking and good luck!
|
|
|
MDL# 4 5 00. 1/ 4" 5x radius. 1.25" Used KBS Rollobender for sale. Item in good condition. For more details. Pls visit www dot orbitalwelding dot com The item to be shipped by Fedex Intl Economy Service. Pls browse my store for more KBS benders of other sizes for sale. Feel free to ask me questions before buying. Thanks for viewing!
|
|
|
GREENLEE MODEL#27364 ROLLER UNIT USED WITH 881&881CT BENDER SETS SHIPPING FOR THIS ITEM IS $34.95.SHIP GROUND UPS ONLY.WE ACCEPT PAYPAL. PERSONAL AND BUSINESS CHECKS(ALL CHECKS MUST CLEAR BEFORE ITEM IS SHIPPED) ANY QUESTIONS CALL 516-741-3198. Check out my!
|
|
Greenlee No. 555 Electric Bender(Inv.28829 2" 1 1/2" Ridgid Dies 2" 1 1/2" 1M.C. Dies 2" 1 1/2" 1 1/4" 1" 3/4" EMT and accessory shown(2) storage boxes(Inv.28829) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our ... moreInternational Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e548fef24-0x101-
|
|
|
NICE USED TUBE IN A NICE CASE Posted with
|
|
|
RIDGID 378 Pipe Bender Geared Ratchet Tubing Bender MINT Like-New Condition Fits up to 7/8" pipe or tubing This piece is in great condition- guaranteed. PLEASE e-mail me with any questions or for additional pictures. Buyer to pay $25 shipping in the US. Thank you for your interest and have a great day.
|
|
|
brand spankin used Swagelok benders- 3/8"
|
|
|
Appears to be in perfect well cared for condition
|
|
|
Custom made bender for 1/4" OD tubing. The length of the serpentine is adjustable. Power supply is 120 psi air- no electric required! This machine was used to bend 0.020" or 0.028 wall stainless steel tubing for the beverage industry. It is very sturdy and well made. The business is no longer operating. So this unit is surplus. Contact seller for shipping and crating costs.
|
|
|
This"Handy manual gear driven tubing bender is for size 1/2" nominal copper tubing( 5/8" O D) It says US Pat No. 1 4 8 5 Made in U.S.A. 2 A on one side of the wheel. The wheel can be reversed by removing one roll pin and shifting the wheel to the other rotation position.
|
|
|
This No Reserve auction is featuring a Ridgid tube bender in great working condition! Model no. 396 with a 3/8' OD and 15/16' radius. There are some minor scratches and nicks from normal use and slight discoloration in small areas. The pictures above are of the actual items included in this auction. Remember there is No Reserve so bid early! Buyer pays $10.00 shipping. I accept Paypal only. Michigan residents add 6% sales tax. I ship out every Mon-Wed-Fri and I do not ship outside of the 48 states. If you have any questions feel free to email me. Thank you for considering my auction and good luck! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e61becd51-0x107-
|
|
|
I do not know much about this item.It is in very good cond.every thing works,two of the flaring blocks are still in original wrapping
|
|
Victaulic PFT507 Pressfit Tool Good working tool in nice condition. This PFT507 has the Milwaukee motor. It comes in the metal box with three jaws. 1-1/4" 1-1/2" and 2" We have a surplus of used Ridgid tools and equipment including Ridgid 535's. Email us with your needs! Save on shipping with multiple purchases! Email us or call Mark Griffith at 1-800-333-2151 ext 470 for further questions. Shipping: All items will be shipped via UPS Ground(signature required for transactions over $250.00) except items requiring freight services. Residential addresses or addresses without unloading facilities will need to pick up freight at local terminal. Email us or call Mark Griffith at 1-800-333-2151 ext 470 for a quote and specify if shipping to a residential address or a business address ... morewith unloading facilities. I think you will agree that our freight rates are very competitive. Of course we always try to get the item out as quickly as possible. But due to high demand it may take longer. All used items except those marked“as-is” will be cleaned, tested and any needed repairs done prior to shipping. Please allow two weeks for delivery. New items will normally ship that business day. Payment: Payment can be paid by Calling 1-800-333-2151 ext 470. We can accept Visa. Mastercard and American Express over the phone. Call for other payment methods. Payment is due within seven days, unless other arrangements are made. If payment is not made within seven days a dispute will be opened through eBay. Sales Tax: State and local tax will be calculated based on the customers ship-to address provided by the customer and added to the final sales order total. Where applicable, unless the customer provides F& M Mafco, Inc. with a tax exemption certificate. All Items are subject to prior sale!
|
|
|
This Auction is for a Used Pair of 1/4" Ridgid Tube Benders. Has 5/8" Radius. Good used Condition. This Item Ships worldwide for $22us!
|
|
|
Rigid No. 358 Geared Ratchet Lever- Type Tube Bender Capacity: 5/8" O.D. Tube Hardly used Shipping to US only Thanks for looking
|
|
|
unit works perfect comes with everything u see in the pics including the stand die sizes are 1 5/8. 1 1/2, 1 1/4, 1 inch prefer local pickup but will ship at buyers expense for actual shipping costs.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e7cf0e1c8-0x105-
|
|
|
UP FOR BID IS A*USED* IMPERIAL EASTMAN TUBING BENDER 368-FH 1/4-3/8 + 6MM-10MM BRAKE FUEL LINE TUBING BENDER. THIS ITEM DOES SHOW SOME NORMAL WEAR DUE TO USAGE BUT STILL IN GREAT WORKING CONDITION. ON THE BACK SIDE OF THE TOOL IT HAS THE NAME( ALLEN W) ETCHED IN THE HANDLE. SEE PICS. U.S BIDDERS ONLY PLEASE. EMAIL ME WITH ANY QUESTIONS YOU MAY HAVE.
|
|
|
This is a used of tube benders.The large one is marked Imperial it is a 1/2" and it does have a chip out of it(see pics)the smaller 1/4" one is marked made in Chicago but does not say imperial on it,the tubes are not marked either but still in ice useable condition and the cutter is marked made in Japan,please see the pics and judge them for yourself,Thanks for looking and GOD Bless America and our Troops
|
|
MADE IN THE USA We sale& auction in groups of similiar items and sizes. We currently have dozens of Swagelok Tools and other Hand Tools and Accessories. Please look at pictures carefully. The item in the pictures is the item you will receive! Check the Condition Description for flaw details. Hard to find 1/4" 3/4" Radius Swagelok Tube Benders(MS-HTB-4) We list new items very frequently so be sure to check back often. PAYMENT We only accept PAYPAL. Final sale price is non-negotiable. Payment due within 3 days. If for some reason you can not make payment. Please contact us as soon as possible. SHIPPING We only ship in the 50 United States. Everything is packaged with care. We will package in the best manner we see fit according to item purchased. We will gladly and promptly leave ... morefeedback once we receive it! All items come from a smoke free home so be sure to check out my other items. Thanks for your interest and happy bidding. Heather& Randy Arvello Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This pipe bender is used. It is in good working condition. 220 volt. Hydraulic motor replaced couple years ago. Only thing wrong with it is couple minor leaks around cylinder shafts. Lots of dies( 1 1/2" 2" 2 1/4" 2 1/2" Machine will bend pipe. Stretch pipe. Flare pipe. Dies are included. Huth brand. Machine is on rollers. Very heavy. Local pickup only. I am retiring. Must sell Posted with
|
|
|
Used hand tube bender. Ratchet is BROKEN.BROKEN! All other pieces are there so this is a great back up kit or if you can get a ratchet replacement even better. One of the latches on the case is missing as well. No returns so please read total description Posted with
|
|
GOULD IMPERIAL Model 364-FHA 3-8 Off-Set Handle Tube Bender This pre-owned tubing bender has been used. But it is clean and appears to be in Very good condition. The handles move freely, the tubing groove is in good condition and the design allows for a 180 degree bend. PAYMENT Payment is due immediately for all“ Buy it Now” sales and within 4 days of the end of all on- line auctions. The eBay Office Assistant has been set to automatically open an“Unpaid Item” case 4 days after the end of the auction if payment has not been received. If there is any reason you cannot comply with the above terms. Such as a cash transaction for a local pick up or an unanticipated payment delay, please contact us ASAP and make us aware of your situation. SHIPPING Domestic shipping is FREE. This charge covers ... moreboth the shipping cost as well as the cost of packaging and materials. The package will ship USPS Priority Mail. USPS Parcel Post or UPS Ground within 2 business days of receipt of payment. We are happy to offer Consolidated Shipping rates whenever possible. Please contact us and let us know which items you are interested in and what you Zip Code is so we can provide you with the reduced cost and arrange invoicing for the purchase. We welcome International buyers for all items that do not present shipping or customs challenges. We understand that International shipping costs are high and do not add any additional handling charges to International orders. International buyers please review calculated shipping costs prior to ordering. RETURNS We do our best to provide eBay buyers accurate descriptions and photographs and encourage you to ask questions prior to bidding on or purchasing an item. If you are not satisfied with your item after receiving it please contact us immediately with your concerns. We will accept return of any item and issue a refund of the purchase price of the item upon receipt of the purchased item in the same condition in which it was shipped. FEEDBACK Our policy is to leave all of our customer’s positive
|
|
|
UP FOR YOUR CONSIDERATION IS:RIDGID BY2A Pipe Vice& Bender 1/8 TO 2-1/2" Ridgid Tool Co. Plumbers HVAC. PURCHASED AT AN ESTATE SALE. GOOD WORKING ORDER. 1/8 TO 2=1/2"D PIPE. BASE IS 4-1/2L X 4 W X 5-1/2"T. ONE ROUNDER. JAW TEETH ARE IN GOOD CONDITION. NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GOULD-IMPERIAL 1/2" LEVEL-HANDLE TUBE BENDER 364-FHA-1-2
|
|
|
Lot of 3. Don't know anything about these. Came out of my grandfathers basement. Look to be in good used condition. See pics. No international shipping Posted with
|
|
|
USED ON ONE JOB THAT I KNOW OF IT IS A OLDER MODEL 388 EXCELLENT CONDITION HAS SOME SCUFFS FROM THE BOX BUT ALMOST NEW FREE SHIPPING TO THE CONTINENTAL US INCLUDING INSURANCE AND PROFESSIONAL DURABLE PACKING. EXTRA SHIPPING OUT OF THE CONTINENTAL US
|
|
|
I DON'T THINK IT EVER MADE IT TO A JOB SITE BEEN IN THE SHOP FOR YEARS 1/2 INCH OD 1-1/2 RADIUS I DON'T THINK IT WAS USED EXCELLENT CONDITION HAS SOME SCUFFS FROM THE BOX BUT LIKE NEW FREE SHIPPING TO THE CONTINENTAL US INCLUDING INSURANCE AND PROFESSIONAL DURABLE PACKING. EXTRA SHIPPING OUT OF THE CONTINENTAL US
|
|
This is a used Parker# 10 hand held 5/8” tubing or pipe or conduit bender. It has the number“651115” and“AA” on the die and“651116” and“AA” on the arm. It has black plastic grips. It has been used but not abused. I am not an expert. So if you have questions or need more photos, please email through eBay. Choose me as a“Favorite Seller” and see other vintage items. I combine items(when possible and still provide safe shipment) to save you money. And you only pay one handling/packing fee on combined shipments. The unpacked/unboxed weight of this bender is 4 pounds. The shipping calculator is a guesstimate only- until your item(s) are packed. I won’t know the actual weight, so please wait for my invoice before paying so we will know the exact weight of the packed item and you’ll get an accurate ... morecost. Sometimes the packed/boxed weight is less than what I thought. Sometimes it is a little more, but I always charge you the actual postage based on actual weight plus the $1.00 handling/packing fee(see below for explanation) To help you save money. I will combine multiple items for shipping purposes, as long as I can still safely ship them. You only pay one handling/packing fee on combined items. I’m sorry, I do not ship International, including Canada. Please notice that I have the best deal on shipping: Buyer pays actual postage to their zip code plus $1.00 handling/packing. This $1.00 will automatically show up on eBay as part of the shipping costs to your zip code. The $1.00 helps to pay for the bubble wrap/peanuts/padded mailer/box. Etc. that your item is packed with. I have no problem shipping via USPS Parcel Select(used to be Parcel Post) or however the buyer wishes via USPS. Books ship via Media Mail. My goal is to ship my items as economically and safely as possible. I ship out items the next business day after payment is received. My Post Office is closed on Saturdays. So I only mail items during the week. Please ask questions or ask for more pictures to be e-mailed to you before you bid. I only res
|
|
|
IN EXCELLENT CONDITION- CHROME INTACT AND HAS NO CORROSION.
|
|
|
The bender is used but still in good condition. The box it comes in does show some wear were it has been stored. Shipping only to the lower 48 states on this item.
|
|
|
This Auction is for a Used Swagelok 3/8" Tubing Benders 15/16" Radius model MS-HTB-6. Work and feel like New! Email me Direct thru the Hello Kitty photo with any questions or Special Prices. Benders Retails for $300. This Item Ships worldwide for $59us! 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e995043fe-0xff-
|
|
|
Enerpac tubing bender kit. Very good seldom used condition. Hydraulic pump and A frame with hydraulic cylinder. Includes dies: 1/2. 3/4, 1, 1 1/4, 1 1/2 and 2" I do not have the case. Only the parts pictured are included. No reserve auction. Your bid is contract to buy. Please pay for auction within 3 days. Shipping set at 25. At that price I am splitting shipping cost with buyer. Packages will be sent Fedex ground. Check my sales feedback and bid with confidence.
|
|
aims GARDNER 1-1/4" CONDUIT TUBE/ PIPE BENDER w/ BUBBLE LEVEL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Gardner. This is a used Conduit Tube/ Pipe Bender in good condition. Features: Lightweight aluminum construction for easy handling. Heat treated for extra strength- reinforced at stress points for longer life. Precision-located degree scale. Star, arrow and rim notch for perfect bends every time. ... moreMarkings are raised and cast into bender body on both sides for easy visibility. Deeply serrated step helps prevent slippage when applying maximum leverage. Grooved internal hook surface helps prevent conduit from slipping. Flat hook surface provides stable starting point. Bubble Level for Exact Measurements. Specifications: Capacity: 1-1/4" Shaft Arbor Hole Diameter: 1-45/64" Overall Length: 49-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. GARDNER 1-1/4" CONDUIT TUBE/ PIPE BENDER w/ BUBBLE LEVEL GARDNER 1-1/4" CONDUIT TUBE/ PIPE BENDER w/ BUBBLE LEVEL GARDNER 1-1/4" CONDUIT TUBE/ PIPE BENDER w/ BUBBLE LEVEL Reliable Tool Inc. c 2011 | Powered by
|
|
|
This is a used tool but in good working condition. No reserve auction high bid wins regardless of price. And fast shipping! Posted with 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e995043f7-0x103-
|
|
|
This auction is for a vintage K-D 2189 pipe/tubing bender. This is for bending pipe sizes 5/16& 3/8. It is in fair used condition. It has some glue residue on it. No cracks. Tool is marked and is 10" long. I am not an expert on this. So what you see is what you get. I ship to address provided by paypal, so if address differs, shipping cost will be affected. Please view my other auctions for more vintage tools. Feel free to email with questions or for more pics. Happy bidding!
|
|
Up for auction is a used but in great condition Ridgid 320-E. The pressing tool comes in a hard and sturdy case. Characteristics: The 320-E is the preferred pressing tool for all ½" 4" applications. This battery-operated tool combines large capacity fitting capabilities with a 90° rotating barrel for access into tight spaces. Durable enough for your small jobs. Powerful enough to handle all your major construction projects. Specs Item Battery Tool With 6-Jaw Kit Type 320E For Pipe Size(In. 1/2 to 2 Voltage 14.4 Ram Force(Lb. 5400 Crimp Time(Sec. 7 Max. Pressure(PSI) 200 Temp. Range(F) 0 To 250 Height(In. 12-3/4 Length(In. 13-3/4 Width(In. 3-1/2 UNSPSC 27112115 Weight 80.000000 SKUs 3AU83 We are located at 6116-A Franconia Road. Alexandria Virginia, 22310. All items are ... moredescribed to the best of our ability. Please feel free to call us at(703)924-9800. US Bidders only please- Good Luck!
|
|
Pipe Bender 1/2 EMT BENDER No. 4195 Good Working Condition! Please see photos! Thanks for Looking! Please see my photos. They are my best description! All of our items come from our personal items. Friends and family's items, yard sale purchases, or auction purchases! We take pride in the items we sell! My daughter and I sell on Ebay together and list things to the best of our abilities! We are as honest as we can be and try to include as much information as possible! There are some items we receive from auction that we really don't know much about and research as best we can! Please ask questions! We will answer as best we can! We always use USPS unless the item is extremely valuable. We usually select Parcel Select(2-9) day shipping. Unless Priority ends up cheaper! If you would ... morelike Priority or Express please message us BEFORE you complete checkout! We will send you an invoice with the correct shipping charge for your desired method! We have a 3 business day handling time. If for whatever reason you need it as soon as possible. Send us a message and we will TRY to ship it ASAP! Sorry. But we do NOT do international shipping! Sorry if this is an inconvenience. If you choose to ignore this. We are not responsible for the time it takes to get to you due to customs! You will also be required to pay the proper shipping to your destination! We ask that you please do NOT purchase out of the United States! We Hope to Do Business With You! Thanks Again!
|
|
|
IMPERIAL eastman 1/4" TUBING BENDER 9/16 radius Free Shipping! I-1
|
|
Welcome to E.S.Sport. A new eBay store providing you with great products from tools to books to whatever you might need. This Auction is for a Set of 6 Tubing Benders. All 6 are in great condition.Except for the biggest one. The rest are still like new. Check the picture. Auction Comes with Everything Pictured. We have great deals everyday and items being listed daily. Make sure to check our other auctions. Shipping: We use Priority Flat Rate with Delivery Confirmation unless stated. Items are shipped when payment is received. Yes. We do offer combine shipping. We ONLY ship with-in the U.S. Feedback: We will leave positive feedback once the buyer has left positive feedback with us. This way we know you received your product, the shipping was quick enough, and you are pleased with your product. ... morePayment: Payment is due within 4 days of auction ending. If after 4 days payment hasn't been received eBay will automatically open an unpaid case against you. If you bid. Then you are agreeing that you can pay for the items your are bidding on. If any problem does come up, please contact us and we can work with you. Auctions are sold AS IS. But we take great pride in everything we sell. Everything is tested and approved before selling. If there is a problem with an item we are selling, then the problem will be stated above. If you have any questions, please e-mail us and we will get back to you in a quick& timely fashion f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13eae96a8aa-0x103-
|
|
|
The sizes here are 398(1/2" 397(7/16" 395(5/16" and 393(3/16" They have some dust and grime, and the 1/2" one has some light rust at the ends of the handles, but they are in good shape overall. I will be happy to add pictures, so please ask. Thank you for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13eb1525a31-0xfe-
|
|
|
Gardner Light Weight Thin Wall pipe bender. Model# 930. It is in very lightly used condition. Comes in the Original Box. The Box is beat-up. It has dual bubble levels for accurate bends every time. Buy-Now or make an Offer. Ships to U.S.A. Addresses Only!
|
|
aims 1-1/2" 3" CONDUIT TUBE/ PIPE BENDERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a used Conduit Tube/ Pipe Bender in good condition. Features: Heat treated for extra strength- reinforced at stress points for longer life. Specifications: Capacity: 1-1/2" 3" Shaft Arbor Hole Diameters: 13/16" Overall Length: 9-1/2" 12" Comes as shown in pictures. Check out the photos! ... moreif you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 1-1/2" 3" CONDUIT TUBE/ PIPE BENDERS Reliable Tool Inc. c 2011 | Powered by
|
|
Selling With No Reserve! Hi! I have for Auction here a like new Lidseen of North Carolina Chicago Model#5100 Pipe Bender. It will bend 1/2" 3/4" and 1" I don't think it's hardly been used. The portable stand is not included. See Pictures. Get yourself a great deal here. For more Info copy& Paste this link into your address bar: http:www.chicagobender.com/5100-5300.html NOTE: I add a $1.50 on all my Priority Mail& $2.00 on regular packages for handling and supplies plus the 9% that eBay charges me on shipping(which is already included) I have people leaving low DSR's on shipping cost's and I really need you to decide that it is okay to pay the shipping that I have on here before you bid or don't bid on my items. Low DSR's cost me a lot as it won't ... morebring me up in search results as quick and I also loose a 20% discount off my eBay fees. I'm selling on eBay to make a living for me& my family and I can't do the shipping for nothing. I realize that shipping prices just went up again with shipping companies but it can't be taken out on the sellers. Thanks for understanding Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered aba
|
|
|
RIDGID TOOLS TUBE BENDER NO 394. 1/4" O.D. 9/16" Radius. MADE IN USA. Very good condition. Check shipping area for shipping options. Ask any? Sold as-is. Check my feedback. PayPal only for payment. PayPal required for international buyers. Check out my other items!
|
|
MENS NIKE HYPERFUSE HYPERBALLER SHOX BLUE/BLACK BASKETBALL SHOES 10 EUC THIS AUCTION IS FOR ONE PAIR OF RIDGID 1/4" BENDERS. PLEASE LET ME KNOW IF YOU HAVE ANY QUESTIONS! THANK YOU PAYMENT IS DUE WITHIN 7 DAYS OF AUCTION ENDING. PLEASE CONTACT ME WITH ANY QUESTIONS! THANK YOU! I LOVE TO COMBINE SHIPPING. PLEASE CONTACT ME FOR MULTIPLE ITEM PURCHASES SO I CAN SEND YOU A DISCOUNTED INVOICE. I USUALLY CHARGE HIGHEST SHIPPING FIRST AND $1-$2 FOR EACH ADDTIONAL ITEM EPENDING ON WEIGHT. INTERNATIONAL BUYERS PLEASE CONTACT ME FOR COMBINED SHIPPING RATES. ALL PAYMENTS ARE DUE WITHIN 7 DAYS OF AUCTION ENDING. I DO NOT RETURN SHIPPING FEES. I ALSO TO NOT GIVE RETURNS FOR NON FITTING ITEMS UNLESS THERE WAS A MEASURING ERROR ON MY PART. I MEASURE ALL ITEMS LAYING FLAT SHOULDER TO SHOULDER.UNDERARM ... moreTO UNDERARM, AND STRAIGHT ACROSS AT WAIST, LENGTH IS STRAIGHT DOWN BACK NOT INCLUDING ANY COLLAR.I DO NOT STRETCH AT ALL ON MY MEASUREMENTS.THIS SHOULD ALLOW FOR A LITTLE BREATHING ROOM! PLEASE DO NOT HESITATE TO CONTACT ME, I DO NOT MIND QUESTIONS AT ALL. THANK YOU MISSYB I LOOOVE TO SHOP SO I SPEND ALOT OF TIME DOING THIS TO BRING YOU THE BEST QUALITY AND STYLE AT INCREDIBLE LOW PRICES.ALL MY CLOTHING IS INSPECTED I TRY AND INSPECT ALL ARTICLES VERY WELL AND ANY FLAWS WILL BE LISTED AT BOTTOM OF LISTING. THE MAJORITY OF MY CLOTHING COMES FROM HIGH END DEPT. OVERSTOCK ETC. ITEMS MAY HAVE REDUCED TAGS ETC.I OCCASIONALLY RECIEVE LIQUIDATION FOR HIGHEND CONSIGNMENT CLOTHING ALSO. THIS IS WHERE MANY OF MY LOTS COME FROM AND I USUALLY MIX THEM WITH NEW ITEMS AS WELL.PLEASE LET ME KNOW IF YOU NEED ANYTHING AT ALL! PLEASE E-MAIL ME WITH ANY QUESTIONS OR COMMENTS THROUGH EBAY AS I ADMIT I DO NOT CHECK MY PERSONAL E-MAIL ACCT AS OFTEN.
|
|
This is a Used Rigid Model 6 Bench Pipe Yoke Vise. It has a 1/8" 3" Pipe Capacity. New model number is 23. Only difference is that the new ones weigh 23 pounds while these weigh 50 + pounds- better& stronger steel. I KNOW THIS ONE NEEDS A GOOD CLEANING BUT IT WORKS SMOOTH AS A KITTEN& THEY HAVE NOT CHANGED THIS VISE IN"FOREVER" AND A BRAND NEW IDENTICAL MODEL IS $240! A wire brush& a can of red paint& you have a brand new one boys Please email if you have any questions on this item. Paypal payment items are shipped in one business day. Positive feedback will be given upon payment. Remember multiple purchases can be combined to reduce shipping costs so check out my other auction listings. Many items are from consignors that buy out estates. Each week items ... moreare different and unusual. Many with a low $9.99 start. International Buyers–Please Note: All items will be shipped by Priority Mail due to shipping losses. WARRANTY- NO FINE PRINT HERE. ALL PURCHASES COME WITH A 100% SATISFACTION GUARANTEE. COMPLETE REFUND OF BID PRICE UPON RETURN OF ITEM- NO IF's. AND's OR BUT's. CHECK MY FEEDBACK RATING AND BID WITH CONFIDENCE! Please leave 5 stars in the Detailed Seller Ratings. If you are satisfied with the overall experience of this transaction please give a rating of 5 stars in our DSR. Ebay considers even 4 out of 5 stars a failure in any of the categories. If for any reason your transaction is less than satisfactory. I encourage you to please contact me first and I will meet your needs. I strive for 5 stars. Thank You. THANKS FOR LOOKING! Be sure to add me to your Powered by The free listing tool. List your items fast and easy and manage your active items. 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13ec66067fd-0xff-
|
|
SUPER EGO N760-1/2"IPE TUBE BENDER SUPER EGO N760-1/2"IPE TUBE BENDER USED PLEASE SEE ALL PHOTOS TO SEE EXACT COSMETIC CONDITION. YOU GET EXACTLY WHAT YOU SEE IN THE PICTURES AND NOTHING ELSE. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS PRIOR TO BIDDING. Payment must be made within 3 days of winning the auction. If payment is not made with in 3 days a"non payer" claim will be started. If payment is not made within the 6th day a"non payer strike" will be issued to your account. I will ship all items the day after your payment is made. I have several years experience in shipping many and all types of items. Turntables. Big vintage receivers, small items, very expensive and not very expensive items will all be treated equal. They will all be packed with plenty of materials ... moreand very securely. They will also all be shipped insured. I will ship to Hawaii, Alaska and Puerto Rice, BUT, shipping will be more money. Ups does not ship to most of these states and USPS does not, If they do they charge more. So if you live in any of these states please email me with your address to get a shipping quote. All items sold as"used' are tested and in good working condition unless stated otherwise. The item will be used and not new. All items sold for"parts or non-working" will not be eligible for any refunds or returns. Although they will be sold as such there will be some specifics as to their cosmetic condition and functionality. All"vintage" items will have all specifics in the description section of the ad so please read it. There it will tell you if it is functional or not. The description will also specify the cosmetic condition. All of my items being listed will specify the cosmetic condition. But since we are all different and good cosmetic condition may not be the same for you. I have taken many pictures so you can judge for yourself. If there are deep scratches, heavy nicks, marking, cracks or any breaks I will make sure to specify that and take close up pictures. No&qu
|
|
|
Up for bid with NO RESERVE is a Cornwell Imperial TC-470FH 180 degree tubing bender! Barely used and in fantastic condition! 3/16" to 3/8" tubing. Comes with original box and instructions. Any questions please feel free to ask! Shipping to lower 48 states only. Thanks for bidding. Good luck and have a great day! Check out our other auctions for more great deals and specialty tools! Posted with
|
|
|
Honda35*FAST SHIPPING* The fine print: Payment: Payment must be received within 7 days of auction ending or item may be relisted. Buyers to pay shipping unless otherwise noted. At this item I do not ship international(including Canada) Returns: Item may only be returned if it arrives not as described or as pictured. So please ask questions before bidding or purchasing. Contact me for approval prior to returning item.
|
|
|
IMPERIAL EASTMAN 364-FHA 3/4" PIPE TUBING BENDERS EXCELLENT CONDITION WORK GREAT AND PRICED TO SELL THANK YOU FOR LOOKING!
|
|
Our Product Categories: Buildings Computers/Electronics Facilities/Maintenance Food Service Furnishings Industrial Equipment Lighting Motor Vehicles/Trailers Musical Equipment Printing/Graphics Shop Equipment/Tools Sporting Goods Miscellaneous Item Location: Brainerd. MN Inspection Dates: May 28 or 29 Pick-Up Dates: June 3 or 4 HUTH Mitey Mate Expander II Model 1675 DESCRIPTION HUTH Mitey Mate Expander II with cart on wheels for easy movement. Model 1675. Includes original manual. DIMENSIONS 20" Wide x 11" Deep x 12" High Cart is 21"W x 16"D x 30"H CONDITION This item is used and sold as is. It shows signs of normal wear that are consistent with use. It was fully functional at last use. PRODUCT IS LOCATED IN BRAINERD. MN. LOCAL PICK UP ONLY. CANNOT FREIGHT THIS ... moreITEM. ADDITIONAL PHOTOS(CLICK TO ENLARGE) This item is located in Brainerd. MN. LOCAL PICKUP ONLY. Inspections will be held for this item at this location on May 28th or 29th. From 9:00 AM- 3:00 PM. If you wish to inspect this item please contact MidwestRMG by clicking on the"Ask seller a question" link in the listing. Please provide us your name and contact phone number that you can be reached during normal business hours. Within one(1) business day we will provide you with the inspection location directions and contact information. You must arrive during the inspection time listed in order to view the product. This product is easily accessible. Buyer is responsible for all equipment. Tools, personnel and transportation needed for loading and removal of the product as there is very limited equipment on-site. This item is scheduled for pickup on June 3th or 4th. From 9:00 AM- 3:00 PM ONLY. In order to confirm pickup on one of the dates listed. Payment must be received at least one(1) business day prior to pickup unless other arrangements have been made in advance by contacting MidwestRMG directly. Pickup information will not be provided until payment has been made. We will not be able to assist in loading or transpor
|
|
|
Used Ensley Conduit Bender in working condition. comes with 1/2 to 1-1/4 shoe. capacities per manufacturer recommendations free local pick up. all others must pay all shipping costs
|
|
011392301. This auction is for an OBO INDUSTRIAL REBAR CUTTER and BENDER! Tool is pre-owned but still in REALLY GOOD CONDITION! Please e-mail us with any questions or concerns Thanks for looking EVERYTHING YOU SEE IN THE PICTURES IS WHAT YOU WILL RECEIVE IN THE PURCHASE! Don't miss out on this great item! BID NOW! CHECK OUT SOME OF OUR OTHER GREAT MERCHANDISE IN OUR EBAY STORE! Can't afford it today? Ask about our layaway plan. That's right. We offer a layaway plan. Any winning bidder on any of our items can place their purchase on layaway with 20% down. We charge NO INTEREST for 90 days. And only 1.5% of the principal if you go past 90 days. A payment must be made every 30 days. All monies are non-refundable. Please contact us if you have any questions. If you have any questions. ... moreOr would like to see photos of anything not shown, please feel free to contact us, either via email, or on our toll-free number. This is an out of pawn item. If you are not 100% satisfied with your purchase please email us or call our toll free number 1-888-775-4949. WE ONLY SHIP WITHIN THE UNITED STATES! ALL ITEMS ARE USED OUT OF PAWN GOODS! UNLESS WE INDICATE NEW! ALL ITEMS ARE THE ACTUAL PICTURES AND ARE DESCRIBED AS IS ASSUME NOTHING IF IT IS NOT PICTURED OR DESCRIBED IT MAY NOT BE AVAILABLE WITH THE ITEM WITHIN THE LISTING. PLEASE EMAIL OR CALL US WITH ANY QUESTIONS OR CONCERNS BEFORE YOU BID! PLEASE CHECK SHIPPING CALCULATOR OR COSTS BEFORE YOU BID! Winner pays actual shipping charges. Shipping charges are stated in the auction and are not negotiable! Additional handling fees may apply on certain items(Complete Bikes. Oversize Item, and Fragile items) which are included in the shipping calculator quotes or in the item description. We reserve the right to cancel bids from Ebay members with bad or few to no feedbacks at any given time or reason. All items including optical and electronic devices are sold AS-IS, so Bid Accordingly) Payments must be received within ten days after auction ends.High priced auctions may requi
|
|
|
You are bidding on a GOULD IMPERIAL PIPE TUBING BENDER. 3/8" 364 FHA 3-8 Chicago USA May have been used but does not look like it. Please see pictures.
|
|
|
Ridgid Tube Bender 1/2 OD 1 1/2 Radius N9 398 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ede1c36b6-0x105-
|
|
|
Eastman tool tubing kit. Mint condition. Posted with
|
|
PARKER 424 TUBE PIPE BENDER 3 SHOES AND FOLLOW BAR PARKER 424 TUBE PIPE BENDER 3 SHOES AND FOLLOW BAR IN GOOD WORKING CONDITION All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND ... moreNY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
Greenlee 851 1/2" to 4" Electric PVC Tubing Tube Plastic Conduit Bender Used In Good Working Condition*Center Plastisc Handle Is Broken* READY TO SHIP SHIPS WITHIN THE CONTINENTAL USA SHIPPING FEE IS DIFFFERENT IF SHIPPING TO A PO BOX. APO AK, HI, PR, OR INTERNATIONAL.
|
|
Up for auction is a very nice pre-owned Imperial Eastman.364-FHB-06 3/8" Tubing Bender. This item was acquired used and has been tested and found to be in good working condition. Cosmetically this item is in great condition showing little signs of wear and use. There are a few scuffs from handling and use. But nothing we consider damage and no abuse. Type: Lever Outside Dia. Tubing Inches: 3/8" Centerline Bend Radius: 15/16' Overall Length: 14" Bend Angle in Deg. 0-180 Handle Type: Swivels to complete Bend PLEASE VIEW PHOTOS FOR MORE DETAILS! PLEASE ASK ANY QUESTIONS PRIOR TO BIDDING! Please take a moment to read all of our auction policies. If you cannot complete the payment transaction please do not bid on the item We will be more than happy to leave feedback after a Buyer’s ... morefeedback has been posted We do our best to describe all of our items to the best of our abilities. However we are human and do make mistakes. If you find that your items was not described accurately PLEASE inform us within 3 days of receiving your item. We will do our best to fix the issue as we strive for customer satisfaction. ALL sales final on AS IS items! We will not honor our return policy if it is a case of buyers remorse! We do not ship international or to APO/FPO addresses. We reserve the right to cancel bids at our discretion. Valued customers. Please be aware that the Item Specifics section is automatically provided by eBay. These details are sometimes incorrect! Always confirm information of the specifications critical to you. Thank you!
|
|
|
RIGID TUBE BENDER 1/4 OD and 9/16 R#394 IN EXCELENT CONDITION
|
|
|
Vintage Bender in very good condition. Has some rust color over it from age but is not rusting. Very nice piece. Have pole but it is too heavy to mail. email for any questions.
|
|
|
Very nice Parker tube bending kit with everything you need! has 11 attachments and the ratchets to turn the tubes at the angle you need Starting at less then half of what its worth with no reserve and free shipping! email me for questions and Happy Bidding! 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13eea12427f-0xf6-
|
|
|
UP FOR SALE A NICE SET OF MULTI BENDERS.USED ON ONE JOB.CLEAN,IN VERY GOOD CONDITION.EMAIL ANY QUESTIONS.THANKS FOR LOOKING
|
|
|
Hotbend HB00001447 PVC Pipe Bender- I acquired this through an estate. I do not know history or working condition, I do not have the means to test. However, I will accept returns and pay for return shipping. Overall Condition is Used- Showing Some Wear, Includes Only What is Shown in Photos, No Box, Hose, or Gauge Included. No Reserve Payment is Due Within 3 Days of Auction End. Payment Accepted Through Paypal Only. Shipping to Continental US(Lower 48) States Only. Item Will be Shipped Within 3 Business Days of Received Payment. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ef1fa5fed-0x106-
|
|
|
You are bidding on a Greenlee 860-4 PVC Heating Blanket. This heating blanket is in very good condition. Some specifications include: 120 volts. 1300 watts, and 10.8 amps. Please look closely at the pictures to see the condition of this heating blanket. There are no exposed wires. This PVC heater is made in the USA. Thank you for looking and let me know if you have any questions. TERMS: Shipping cost will be free. Payment must be received within 5 days of auction end. Will only ship this item within the USA.
|
|
|
This is a tubing bender for 3/16" tubing. It has markings from 0 to 180 degrees in 45 degree increments to precisely set your angles. The bend radius is 7/16"
|
|
|
IMPERIAL 370-FH TRIPLE HEAD TUBE BENDER 1/4 3/8 1/2" L@K IMPERIAL 370-FH TRIPLE HEAD TUBE BENDER 1/4 3/8 1/2" PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
|
Vintage pipe tube bending tool. Was used in auto mechanics but could be used anywhere needed. Seems to be in good working order. Called a Hand Bender. Measures 8" 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ef8737247-0x101-
|
|
Imperial Triple Head Tube Bender 470-FH 180 Degree Tubing Bender This item comes to us Previously Owned- Sold"As Is" NO RETURNS. FREE SHIPPING TO US 48! You Are Invited to Click Here to View Our other eBay Auctions! ALWAYS READ OUR INSPECTION REPORTS PRIOR TO BIDDING! Up for auction is a used Imperial Triple Head Tube Bender 470-FH 180 Degree Tubing Bender. It shows normal wear from use and is in Good. Used condition. Inspection Report: It shows normal wear from use. Is in G ood. U sed condition. Item pictured is the actual item you will be receiving. Auction i s for a used Imperial Triple Head Tube Bender 470-FH 180 Degree Tubing Bender ONLY. AS PICTURED. You Are Invited to Click Here to View Our other eBay Auctions! No Reserve- Auction Only- No"Buy It Now" Offered PLEASE ... moreREAD THE AUCTION DESCRIPTION CAREFULLY- Usually this will tell you if the item has been tested or if the item has any defects. We do occasionally sell items that we are not familiar with. Including specialty tools and high end electronic equipment. We are not experts on everything and therefore cannot properly test items we don’t have a good working knowledge of. Please pay attention to the auction description to find out what is included in the auction. If it is not listed as being included, then it is not included in the auction. PLEASE ASK QUESTIONS BEFORE YOU BID if you are not sure what is included or if an item has been tested. We stand by our descriptions and if that description is incorrect. We will try to work something out. Sometimes things happen that are beyond the buyers and sellers control and we are happy to work with the buyer whenever these things happen. Above all else, we want you to be happy with your purchase. International Buyers– Please Note Under no circumstances will we provide false information on a customs form. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs offic
|
|
|
aims KLEIN TOOLS 56207 3/4" EMT TUBE/PIPE BENDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Klein Tools. This is a Tube/ Pipe Bender in good condition. Specifications: Capacity: 3/4" Approx. Rigid: 1/2" IMC: 1/2" Overall Length: 39-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KLEIN TOOLS 56207 3/4" EMT TUBE/PIPE BENDER Reliable Tool Inc. c 2011 | Powered by
|
|
|
This is a Greenlee 885 Hydraulic Bender Frame. It is in good condition as shown in pictures. I may disassemble two halves for shipping purposes. I also have other parts from this bender I am selling. Ships UPS ground to lower 48 states. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f05cb3662-0xfd-
|
|
IMPERIAL EASTMAN 3/4" OD. 3" RADIUS HAND PIPE TUBE BENDER Search IMPERIAL EASTMAN HAND PIPE TUBE BENDER USED 3/4" OD. 3" RADIUS ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. 351 DJ SW 9 2122013 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping ... moreyour order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival
|
|
|
Like new tool. Please look over carefully for size. I don't know much about this. The embossing says"1/2 EMT.
|
|
|
VERY GOOD CONDITION Imperial-Eastman 1/2OD-1 1/2 Radius( 364FHA 1-2) 3/8 OD- 15/16 Radius( 364FHB 3-8) 1/4 OD- 9/16 Radius( 364FHB 1-4) 2- 1/8 OD- 3/8 Radius( 364-FH) Parker 1/4 OD- 7/16 Radius.
|
|
Greenlee PVC Heating Blanket 860-1- 1/2 for up to 1-1/2 Fast Free Ship to US 48 This item comes to us Previously Owned- Used and Sold Shown No Reserve- Auction Only- No"Buy It Now" Offered FREE SHIPPING TO US 48! You Are Invited to Click Here to View Our other eBay Auctions! ALWAYS READ OUR INSPECTION REPORTS PRIOR TO BIDDING! Inspection Report: This auction is for a previously owned Greenlee PVC Heating Blanket 860-1- 1/2 for up to 1-1/2. Item has been tested by plugging it in and it gets warm. Works fine. I t is in good condition and shows normal wear from use. Pl ease see p ictures. Item has been tested and work s fine. I tem shows normal signs of wear from use as pictured. Pictures are of actual item you will be receiving and everything pictured is included. If it is not pictured ... moreit is not included. Auction Includes: warming blanke t and plastic case as pictured. There are no accessories included. FREE SHIPPING TO US 48! You Are Invited to Click Here to View Our other eBay Auctions! PLEASE READ THE AUCTION DESCRIPTION CAREFULLY. Usually this will tell you if the item has been tested or if the item has any defects. We do occasionally sell items that we are not familiar with. Including specialty tools and high end electronic equipment. We are not experts on everything and therefore cannot properly test items we don’t have a good working knowledge of. Please pay attention to the auction description to find out what is included in the auction. If it is not listed as being included, then it is not included in the auction. PLEASE ASK QUESTIONS BEFORE YOU BID if you are not sure what is included or if an item has been tested. We stand by our descriptions and if that description is incorrect. We will try to work something out. Sometimes things happen that are beyond the buyers and sellers control and we are happy to work with the buyer whenever these things happen. Above all else, we want you to be happy with your purchase. International Buyers– Please Note Under no circumstances will we provide false i
|
|
|
GREENLEE 881 Conduit Bender with Table With Accessories! second set This was removed from a facility that closed. This is second of two systems I am selling at this time. Additional pictures are located at the bottom of the ad that show all the accessories. This system is being sold as is. YOU CAN CONTACT ME DIRECTLY WITH ANY QUESTIONS AT 719-310-9099(ALAN DICKSON) WE ARE BASED IN COLORADO SPRINGS. COLORADO. Local pickup is welcome(Colorado Springs CO) No C.O.Ds please.Payment due within 7 days of auction end.
|
|
THIS IS A NICE RIDGID 5/16 OD 15/16 R TUBE BENDER NICE# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will ... morebe shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item5. F04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f17b3823f-0xf2-
|
|
|
A BIT TATTERED BUT WOULD WORK IN A PINCH. GREAT AS A BACK-UP OR A LOANER,HEATS UP IN 10 SECONDS,THANKS FOR LOOKING,SHIPS 2 DAY PRIORITY!
|
|
|
Like new conduit pipe bending tool. Please look over photos carefully for size. I don't know much about these. Feel free to ask questions. The embossing says"1/2 EMT" 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f1efdbce5-0xbd-
|
|
|
GB-HAND BENDER FOR 11/4" EMT CONDUIT SHIPPING FOR THIS ITEM IS $8.95.SHIP GROUND UPS ONLY.WE ACCEPT PAYPAL. PERSONAL AND BUSINESS CHECKS(ALL CHECKS MUST CLEAR BEFORE ITEM IS SHIPPED) LOWER 48 ONLY ANY QUESTIONS CALL 516-741-3198. Check out my!
|
|
|
Here's a neat old tool folks. Looks to be in working order. It's stamped 1/4 O.D. and 9/16 R. Also has# 541 8-8. I got it at an old linemans garage sale. I cleaned it up. Take a look! I'm guessing the shipping will be around 7 bucks. Good luck.
|
|
|