|
|
Order by: |
Buy It Now
$9.95 Shipping
Condition: New Location: Nappanee, United States
Powder Type: Polyester. GLOSS: 30-40%.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 235474. Graco Gun Repair Kit. Your Authorized Graco / Titan Distributor an d Repair C enter. Graco Silver Plus Gun. Flex Plus Gun. This will repair the guns below We are an AUTHORIZED Wagner/SprayTech/Titan/Speeflo/ASM Distributor and stand behind our product.
Buy It Now
Free Shipping
Condition: New Location: River Grove, United States
Blysk Textured Black paintable chip guard coating is chip resistant, fast drying and an effective corrosion protector.
Buy It Now
Free Shipping
Condition: New Location: Newark, United States
SKU#: D Sprayer 01. Titan Paint Sprayer 440 540 640. Exactly work as genuine parts.
Buy It Now
Free Shipping
Condition: New Location: New York, United States
Item Form Aerosol. Included Components aerosol. Paint Type Spray. Manufacture date on can 2 year expiration from that date. Color: Clear liquid. Color clear. Part Number 3680061. Item Weight 11.6 ounces.
Buy It Now
$6.49 Shipping
Condition: New Location: , United States
PLASTI DIP RUBBERIZED COATING. Can be applied by spraying, brushing or dipping. 14.5 Ounce Dip Can. 11603-6 BLACK. Color=Black.
Buy It Now
Free Shipping
Condition: New Location: Miami, United States
6 Mils Greenhouse Plastic Sheeting. Higher Light Transmission: Our green house plastic clear let light through, distributing light evenly throughout the greenhouse, Get even lighting and maintain warm temperature is essential to allow your plants to thrive, you also can see the status of the plant growing through the greenhouse cover.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
It is constructed of graphite material. 1 x Graphite Ingot Mold. We will try our best to reduce the risk of the custom duties. Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Buy It Now
Free Shipping
Condition: New Location: , Canada
Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF). Special shielding paint with the focus on maximum shielding, if every single dB counts. Limitations at hardness and abrasion resistance.
Buy It Now
Free Shipping
Condition: New Location: Des Plaines, United States
BLYSK Heavy Textured Coating White (U250) 15oz. - Paintable Chip Guard Textured Coating - White BLYSK Textured Coating is a white paintable chip guard that is chip resistant, fast drying and an effective corrosion protector.
Buy It Now
$5.50 Shipping
Condition: New Location: Deerfield, United States
0 bids Free Shipping
Condition: New Location: Walton, United States
About this item: Heavy Duty Hose Assembly: 5/16" air hose for air transfer, working pressure 250-900 PSI, works temperature -68℉to 194℉; 1/4" fluid hose for fluid transfer working pressure 500-3000 PSI; works temperature -86℉to 212℉. Premium Material: Made of high-quality materials to ensure exceptional durability and reliability. Good sealing performance: with advanced sealing techniques, ensuring reliable gas and liquid transmission while minimizing the risk of leaks. Versatility: Its versatility allows for the seamless transfer of both air and fluids, accommodating diverse operational needs. Package include: .
0 bids $9.00 Shipping
Condition: New Location: Weatherford, United States
Specific Gravity: 1.62.
Buy It Now
Free Shipping
Condition: New Location: Mountain Home, United States
SEM 38343, Vinyl Prep, Professional Vinyl Prep and Cleaner, Aerosol SEM 38343 is a high strength combination of solvents and water designed to pre-clean prior to painting vinyl or plastic. This fine product not only cleans soils, waxes, and grease from the surface, but also creates a slight softening of the vinyl film and prepares the surface for coatings such as with SEM Color Coat or SEM Marine Vinyl coatings.
Buy It Now
Free Shipping
Condition: New Location: Joliet, United States
Film-Gard 626031 Construction Plastic Sheeting 10' Width X 100' Length X 6 mil Thick, Black, 1 Count. MULTI-PURPOSE: this durable, construction-grade polyethylene sheeting provides protection against water vapor and foreign matter.
Buy It Now
Free Shipping
Condition: New Location: Woodstock, United States
Paper Disposable Floor Mat (Box/500) - PFM-500. Durable Paper. - Durable Paper. Box of 500. - Box of 500. Color: Multicolor.
Buy It Now
Free Shipping
Condition: New Location: Broomall, United States
They're great for most paints, stains, varnishes, acrylics, gesso, and glues. Made with sturdy solid wood handles that feel comfortable in hand and 100% all-natural china bristles with all square trim, these multipurpose brushes are ideal for painting or staining walls, trim, baseboards, decks, doors, fences, and more.
Buy It Now
Free Shipping
Condition: New Location: , United States
Make your next finishing project a success with this 160-piece high-temp silicone plug and cap kit. The tapered design of the stopper-style plugs allows them to fit a variety of different hole sizes.
Buy It Now
Free Shipping
Condition: New Location: Egg Harbor Township, United States
0 bids Free Shipping
Condition: New Location: Walton, United States
About this item: Heavy Duty Hose Assembly: 5/16" air hose for air transfer, working pressure 250-900 PSI, works temperature -68℉to 194℉; 1/4" fluid hose for fluid transfer working pressure 500-3000 PSI; works temperature -86℉to 212℉. Premium Material: Made of high-quality materials to ensure exceptional durability and reliability. Good sealing performance: with advanced sealing techniques, ensuring reliable gas and liquid transmission while minimizing the risk of leaks. Versatility: Its versatility allows for the seamless transfer of both air and fluids, accommodating diverse operational needs. Package include: .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. If you are not sure if this model is right for you, please feel free to contact us. Features: 3600 PSI Airless Paint Spray Gun w/ Tip Guard & Tip 100% new and high quality. 3600PSI needle durable airless sprayer gun. Easy to operate, excellent atomization and anti switched from cleaning the ability to switch. Fast, easy to clean, simply rotate the nozzle cleaning. Ergonomically designed handle to reduce fatigue. Needle without adjustment, maintenance easier and fast. Specifications:.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
General Purpose Lubricant, Dry, Sprayon, LU200, Net Fill 11 oz, Container Size 16 oz, Lubricant Container Aerosol Can, Molybdenum, No Additives Primary Additive, Min. -30 Degrees F, Max. Zoro Select Bulk-Fs-F13-99 Felt Sheets.
Buy It Now
Free Shipping
Condition: New Location: Walton, United States
About this item: Heavy Duty Hose Assembly: 5/16" air hose for air transfer, working pressure 250-900 PSI, works temperature -68℉to 194℉; 1/4" fluid hose for fluid transfer working pressure 500-3000 PSI; works temperature -86℉to 212℉. Premium Material: Made of high-quality materials to ensure exceptional durability and reliability. Good sealing performance: with advanced sealing techniques, ensuring reliable gas and liquid transmission while minimizing the risk of leaks. Versatility: Its versatility allows for the seamless transfer of both air and fluids, accommodating diverse operational needs. Package include: (Depends on Buyer's Option).
0 bids Free Shipping
Condition: New Location: New York, United States
It's constructed of recycled plastic. It can be easily rolled out and cut to the exact size and shape needed. clear plastic sheeting is ideal for protecting floors from paint drippings and overspray.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
To date, Prismatic Powders has developed over 6500 custom powder coating finishes, making Prismatic Powders the world's largest custom powder coating manufacturer. We strive to be the place of unlimited choices, where you can live out your personality in color.
5d 19h 53m 46s 0 bids
$1000.00 Now
Free Shipping
Condition: Used Location: Chino Hills, United States
Up for sale is a Graco GM1230 Roof Rig, perfect for your industrial painting needs. This powerful tool is designed for efficient and professional-grade paint application, and it's sure to get the job done quickly and effectively.
Buy It Now
$45.00 Shipping
Condition: New – Open box Location: , PL
Clean the hardened surface with compressed air. Prepare solution A: 50 ml component A1 + 70 ml A2 + 50 ml A3 + 850 ml demineralized water. Use the highest quality demineralized water. Preferably marked 0 (zero).
0 bids Free Shipping
Condition: New Location: Denver, United States
Paint Stripper Aerosol 16 oz. Removes multiple layers of any finish without raising wood grain. Excellent for smaller projects. Read entire label prior to use or storage. Keep out of reach of children.
0 bids $9.00 Shipping
Condition: New Location: Weatherford, United States
With candy top coats the color can also vary based on thickness.
Buy It Now
Free Shipping
Condition: New Location: Sacramento, United States
Any-angle spray with comfort tip reduces finger fatigue with easy application from any direction. Painter's Touch 2X Spray Paint, Gloss White, 12-oz. Paint And Paint Supplies. Any angle spray with comfort spray tip.
0 bids $9.00 Shipping
Condition: New Location: Amelia, United States
New, virgin SherwinWilliams Powdura TGIC Arctic White powder coat. Superdurable Polyester Gloss powdercoat. Cure schedule is 400 degrees for 10 minutes.
Buy It Now
Free Shipping
Condition: New Location: Strongsville, United States
These couplers do not require that you retract the sleeve when inserting the plug.
Buy It Now
$14.99 Shipping
Condition: New Location: , United States
CERAKOTE® (AIR CURE) C-Series. Uses: Automotive, wheels, exhaust systems, firearms, architectural, lighting, hardware, optics and much more. Formulated to withstand temperatures From 300°F - 1800°F with Glacier® Series.
Buy It Now
Free Shipping
Condition: Used Location: Elmwood Park, United States
FITS Corob Tinting Machine - Different Models and types. TAKE OFF FROM 100% WORKING Corob Tinting Machine.
Buy It Now
$9.00 Shipping
Condition: New Location: Weatherford, United States
Simplify your process with these hooks so you can just grab and go. V Powder Coating Hooks. Quantity: 50 hooks.044 x 2" S Hooks.062 x 3" S Hooks.120 x 4" S Hooks.120 x 6" S Hooks.
0 bids $12.50 Shipping
Condition: Used Location: Saint Paul, United States
Buy It Now
Free Shipping
Condition: New Location: Carol Stream, United States
Dries to a satin finish. Maximum corrosion protection against rust, weather, sunlight, oil and water. Up to 15 sq ft of coverage per can.
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
75+ gloss. Approved for interior or exterior use. 100% virgin powder. Cure Schedule: 10 mins @ 400 degrees. 1LB MIRROR HIGH GLOSS CLEAR Powder Coating Paint Looks Wet! High-temp tapes, silicone plugs, powders- we are adding more regularly!
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model KRYL 1613. • VOC-compliant acrylic lacquer formula, free of lead hazards. • Resin Type: Acrylic Lacquer. • (1) Can Flat Black Spray Paint. • Uniform coverage. • The most asked-for spray paint in the industrial marketplace.
0 bids Free Shipping
Condition: New Location: Kellogg, United States
New Graco/Glas-Craft OEM mixing chamber seal for the original Probler spray guns, not P2, part #16807-00. These fit the AA to 03 size mixing chamber.
Buy It Now
Free Shipping
Condition: New Location: Carol Stream, United States
Resists heat AM26to 250F and does not crack or peel.
0 bids Free Shipping
Condition: New Location: Farmington, United States
TECHSPRAY 2300-100 double Cotton tip swab 3/16 x 6" 100 per bag soldering makeup.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Professional, Multi-Purpose Extension Pole Can Be Used For Painting, Dusting, Windows Squeegeeing, And …. Extendable Pole With Universal Tip Can Be Used With Paint Rollers, Dusters And …. Paint Pole Made From Anodized Aluminum To Resist Rust And Corrosion.
Buy It Now
Free Shipping
Condition: New Location: Atlanta, United States
Comfort tip and any angle spray reduce finger fatigue and allow painting of hard to reach areas.
Buy It Now
$36.95 Shipping
Condition: New Location: Vernon Rockville, United States
This auction is for a lot of (2) New kits of WeatherBeater Silver Gray Epoxy Shield Garage Floor Coating Kit. Ships to the lower 48 states. Good luck bidding
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number RAX417. This high quality Graco part will work with most Graco spray guns, and replace your current guard. You cannot use a blue tip with a different guard. Graco RAC X Guard and Tip Combo.
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
This powder is transparent so the exact shade can vary based on how thickly the powder is applied. A very beautiful, high gloss powder. 100% virgin powder. Cure Schedule: 10 mins @ 400 degrees. High-temp tapes, silicone plugs, powders, etc.
Buy It Now
Free Shipping
Condition: Used Location: Helena, United States
It is very hard to undo that task. I DO NOT ALLOW LOCAL PICKUP, UNLESS PREARRANGED.
Buy It Now
Free Shipping
Condition: New Location: Carol Stream, United States
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. High-Solids formulation for twice the coverage of conventional spray paints.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
This is a great kit for all of those precision jobs with small, hard to reach studs, pipes, fittings, etc. Benefits of our premium silicone products include Green -. 234" ID x. 360" OD x 1.00" Long - 25 Pieces.
Buy It Now
Free Shipping
Condition: New Location: Broomall, United States
They're great for most paints, stains, varnishes, acrylics, gesso, and glues. Made with sturdy solid wood handles that feel comfortable in hand and 100% all-natural china bristles with all square trim, these multipurpose brushes are ideal for painting or staining walls, trim, baseboards, decks, doors, fences, and more.
Buy It Now
Free Shipping
Condition: New Location: Columbia, United States
Adjustable KV’s (0-100) with DPW technology. Kool Koat 3.0 DPW. The Kool Koat series is the powder coating gun that continues to revolutionize the powder coating industry. The Kool Koat 3.0 is the ultimate in powder coating performance.
Buy It Now
Free Shipping
Condition: New Location: New Bloomfield, United States
• Amount: 1lb. • Item: Prism Powder Coating. You will receive a POWDER PAINT. NOT LIQUID PAINT. ABOUT WAREHOUSE POWDER COAT. • Color: Raw Steel.
Buy It Now
Free Shipping
Condition: New Location: Carol Stream, United States
Good Grip is designed to improve traction on most surfaces. Contains plastic beads to improve traction on most any surface. More durable than tape, resistant to oil and gas, and traffic ready in 24 hours.
0 bids Free Shipping
Condition: New Location: Walton, United States
About this item: Heavy Duty Hose Assembly: 5/16" air hose for air transfer, working pressure 250-900 PSI, works temperature -68℉to 194℉; 1/4" fluid hose for fluid transfer working pressure 500-3000 PSI; works temperature -86℉to 212℉. Premium Material: Made of high-quality materials to ensure exceptional durability and reliability. Good sealing performance: with advanced sealing techniques, ensuring reliable gas and liquid transmission while minimizing the risk of leaks. Versatility: Its versatility allows for the seamless transfer of both air and fluids, accommodating diverse operational needs. Package include: .
Buy It Now
Free Shipping
Condition: New Location: Garden Grove, United States
With our range of colors, finishes, and easy-to-use formulations, Plasti Dip empowers you to unleash your creativity and achieve stunning results. You can choose from full car coatings, partial coatings for hoods, roofs, and body panels, and accent pieces such as side mirrors, emblems, and grilles.
0 bids Free Shipping
Condition: New Location: , United States
El tapete desechable de papel está diseñado para proporcionar un nivel de protección basado en el entorno de servicio y la aplicación. Papel duradero. Caja de 500.
0 bids Free Shipping
Condition: New Location: Troy, United States
And when you combine a crawl space vapor barrier with a waterproofing system, now you have the ultimate humidity protection of the crawl space from both liquid water and water vapor before it has the chance to enter your building.
Buy It Now
Free Shipping
Condition: New Location: Minooka, United States
1 GAL 100 VOC DTM Alkyd Gloss White 6DNW9 RUST-OLEUM 255614. RUST-OLEUM 255614. Excellent coverage per gallon. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
|
|
|
|
here we have a mixed lot of 5 jars powder coat paint chart green blaze orange. 2) hot pink, and chart yellow very little used in the jars. Thanks for looking
|
|
This is the performer you've been waiting for and the best color ever released! The hard and expensive part is done. It's a lready sand blasted an d powder coated. New ERA correct decals have been added. This is an original GT performer frame. Bars and seat post. The frame is in flawless shape. No dings or dents of any kind. The drop outs are flawless. It has an update d stem and fork. I intended to restore th is bike with modern touches. Everything you see in the pics is what you get. There's also a new headset. You'll need some custom parts to fit the new parts. But it'll be a killer bike. I also have the original OGK mags in another auc tion. Bid with confidence just look at my perfect feedback. My auctions always please and this is no different! Bid to win because this ... moreis a no reserve auction! Now for the not so pleasant details that must be addressed due to the small amount of people who don't take eBay seriously. If you have zero or and negative feedback don't even consider bidding. Under no circumstances will I ship outside the USA. I only accept PayPal Must pay within 24hrs after auction ends. Or it will be offered to the next highest bidder. Non payers will not be tolerated and a case will be opened against them.
|
|
|
This is a used Deimco powder coating booth that is fully functional. This is a first class paint booth. The front opening measures 48" x 48" The paint hopper includes a fluidizing bed. The booth has three filter cartridges with a powerful blower that keeps the powder in the booth. As powder accumulates on the cartridges. Automatic controls sense the buildup and pulse the system to knock the powder off the cartridges and back into the hopper to be sprayed again. The booth is setup for 230V-3 phase power. It's mounted on heavy duty casters for easy mobility. Refer to Deimco's website for full equipment specifications. I can assist the buyer with loading the booth but the buyer is responsible for all shipping arrangements. Posted with
|
|
Add Snap Electronics Liquidators to your favorite stores and receive our exclusive emails about new items and special promotions! General Interest Functional Condition: This spray gun has been inspected and is fully functional Cosmetic Condition: This spray gun appears to be lightly used. It has a few small scratches at various places on the handle. There are no other cosmetic issues and all other pieces are in excellent condition. please see pictures) Items Known To Be Missing: None Condition of Original Retail Packaging: Good, The Tool Force HVLP touch-up spray gun is ideal for covering small areas and touch-up work. It features a working pressure of 43-to-50 psi and an air consumption of five cubic feet per minute. The nozzle size is one millimeter. The cup capacity is 1/8 liters, and the ... moreair inlet is 1/4 inches. With HVLP this spray gun prevents over-spray, saving energy and material. It requires a 2 HP air compressor(sold separately) What's in the Box Brush, spanner, cup filter, and plastic cup.HVLP touch-up spray gun ideal for covering small areas and touch-up workWorking pressure of 43-to-50 psi; air consumption of 5 cubic feet per minuteHVLP prevents oversprayIncludes brush, spanner, cup filter, and plastic cup1 millimeter nozzle; 1/8-liter cup capacity; 1/4 inch air inlet HVLP touch-up spray gun ideal for covering small areas and touch-up work Working pressure of 43-to-50 psi; air consumption of 5 cubic feet per minute HVLP prevents overspray Includes brush, spanner, cup filter, and plastic cup 1 millimeter nozzle; 1/8-liter cup capacity; 1/4 inch air inlet Payment is required within 7 days from the end of the auction. We accept Paypal only. If there are any questions please feel free to contact us through Ebay. By bidding on any of our auctions or selecting the"buy it now" feature on any of our fixed price listings. You are agreeing to pay in full within the time period allowed by Ebay. If there are any questions please feel free to contact us through Ebay. Item may be returned within 30 c
|
|
|
For sale is a box shaker for an older itw gema PGC1 powder coating system. Please note this is the box shaker stand and pick up tube only. There is no gun or controller.
|
|
|
NORDSON NON LOADING KV METER KIT P/N: 135807 MLM286
|
|
|
THIS IS A VERY NICE HOSOKAWA MICRON POWDER SYSTEMS AIR JET SIEVE GOOD CONDITION CAME OUT OF A WORKING ENVIRONMENT. Shipping on this item is 58.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item55.
|
|
|
This Nordson manual powder coating gun delivers exceptionally smoth finishes and excellent penetration into part recesses. It works great. Has been lightly used, and well cared for. Everything is in very good condition. This Versa-Spray box feeder system is lightwieght, compact, yet exceptionally rugged and reliable. This item is located in the state of Utah. All equipment is sold in as-is-where-is condition unless otherwise specified here.
|
|
Binks Sames SCM-2000 Powder Coating Safety Control Module Description Binks Sames SCM-2000 Powder Coating Safety Control Module. Part: 53-5167-00 Removed from working system. We do not have the capabilities to test this item completely but we will guarantee it to work properly or we will give you a 100% refund(Excluding shipping) if returned to us within 14 days. Shipping Terms Shipping cost includes full insurance and packaging. If you need expedited or have any other shipping questions please contact us. Auctions totaling $250 and above will be shipped with signature confirmation. Items will generally ship next business day after cleared payment. Excluding weekends and holidays. For Minnesota shipping addresses or Pickup at our warehouse 7.125% sales tax will apply. Return Policy 14 Day ... moreGuarantee. Buyer pays return shipping. Payment refunded to original payment method. All returns except for defective items will be subject to a 20% restocking fee.
|
|
|
SLIGHTLY USED- WAGNER Project Paint Sprayer 5.4 GPH They have come from store- Tried power that works perfect( using water) Looks NEW
|
|
|
Auction is for a Used Chicago Powder Coating System. This is an easy-to-use powder coating gun. Just fill the tool with any standard powder and you’re ready to go. Comes with 3 spare powdercoat cups and 1 lb of white powder. System has only been used a few times and is still in good condition. Still have original box. Requires 10-30 PSI air pressure. 120V, 15 amps 1/4" air inlet. Comes as is with everything pictured.
|
|
|
Parker ionics gx7000 hopper Gx7000s. Gun is damaged in needs replaced see photo. I acquired this machine as good working unit that would need a new gun. No testing has been done besides plugging it in. Everything pictured is included. No guarantee. Instruction manual included. PayPal required or cash upon pickup Will be able to put on a pallet an drop at Tulsa local shipping warehouse. Posted with
|
|
QNix® 4500 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses. On steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix gauges: With the QNix® 4500 precise measurements on steel. Iron and non-ferrous metals become simply perfect. Change between the measuring procedures by simply pressing on the button. No calibration. With high precision over the entire measuring range: Fe 3000 µm and NFe 2000 µm. The sensitive measuring probe of the extremely small, light and handy QNix® 4500 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, ... morebattery condition, mode of operation and serial number. The sensitive measuring probe of the extremely small. Light and handy QNix® 4500 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. Extremely precise: High measuring accuracy over the entire measuring range. Simple operation: No calibration. Only one button. One-hand operation. Innovative technology: Proven Hall sensor and Eddy Current technology. Integrated measuring probe without cables or plugs. Broad spectrum of use: Dual probe for measurements on steel and non-ferrous metals.
|
|
|
this furnace is good for powdercoating or heat treating made by new england oven and furnace co. inc. orange conn. model# 223 ser# 4147. Temp range 100-650f 480volt 3ph power circuit 120volt 1ph control circuit heat rating 15kw.
|
|
|
Eastwood Complete HotCoat Powder Coating System. Comes with 8'x8'x4' programmable 220v Oven. Electrostatic Spray Station& latest Sprayer- Plus, over a Dozen of different colored Powders are included to any"Buy it Now" Bidder. Easy to follow manual shows even the first timer how to do everything quickly and easily. Start-up your own Powder Coating business overnight! Apply perfect, hardened color finishes. Tons of different textures and colors to order. System cost over $16,000 new, priced at nearly half that.
|
|
|
Used Spectracoat Manual Gun II Made to use with Spectracoat powder coating systems. This can be used with a Wagner system by purchasing our Powered by On Jul-23-10 at 20:36:37 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
You are bidding on an Eastwood Hot Coat Powder Coating System Used once- Need a bigger machine(this is more for home use and smaller jobs) We are a powder coating company so the item was well taken care of and looks NEW. Package Contains: Hot Coat Gun 1 Bottle Moisture Filter Power Supply. If you have any questions. Please ask before bidding! GOOD LUCK!
|
|
|
You are bidding on a control panel that was removed from a working oven. We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
5 used powder coating hoppers. 1 hopper for parts. These are all in good working condition except for the parts one. I used them with a Nordson Surecoat and Versa Spray II guns, but I'm pretty sure they will work with other brands. I am only selling because I switched to a box feed gun. Posted with
|
|
QNix® 4200 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses. On steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix gauges: With the QNix® 4200 precise measurements on steel. Iron and non-ferrous metals become simply perfect. Change between the measuring procedures by simply pressing on the button. No calibration. With high precision over the entire measuring range: Fe 120 mil. The sensitive measuring probe of the extremely small, light and handy QNix® 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode ... moreof operation and serial number. The sensitive measuring probe of the extremely small. Light and handy QNix® 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. Extremely precise: High measuring accuracy over the entire measuring range. Simple operation: No calibration. Only one button. One-hand operation. Innovative technology: Proven Hall sensor technology. Integrated measuring probe without cables or plugs. Broad spectrum of use: Dual probe for measurements on steel and non-ferrous metals. Protective measuring: Polished ruby tip to protect both probe and surface to be measured. Gauge for standard applications- simple. Fast measurements. One-hand operation. Only one button. No calibration. High precision over the entire measuring range: Fe 120 mil Broad spectrum of use for nondestructive measurements on steel. Iron and non-ferrous metals such as aluminum, zinc, copper and brass. Compact design with integrated probe. Innovative. Proven technology: Hall sensor and Eddy Current technology. Acoustic signal for confirmation that measurement has been taken. Non wearing ruby probe tip for long term use. Optimal LCD Display: Larg
|
|
We will not remove items from eBay to sell directly. Free shipping service is only available in the Lower 48 States and only on qualified items. Condition Acronym Description: NIB(New In Box) NNB(New No Box) NOS(New Old Stock) USG(Used Surplus Guaranteed) MRG(Manufacturer Refurbished Guaranteed) PNW(Parts Not Working or Untested) Manufacturer: Ransburg Gema Item Title: Paintbooth Pump Drive Module Model Number: 74302-01 Description: Rev A Drive# 7430 Includes all hardware and plugs Condition: Used. Pulled from working environment. Quantity: 1 Guaranteed No DOA Please use the shipping calculator tab at the top of the page to determine your shipping costs. Please review the"Shipping and Payments" tab above the auction before purchasing. Some notes on Shipping: Free Shipping is for ... moredomestic orders only and will be shipped via Fedex SmartPost. Fedex Ground, Fedex Home Delivery or USPS Parcel Post depending on the weight and destination. Items weighing over 120lbs will be palletized and shipped via freight carrier. We get very good rates on freight shipments. Please use the shipping calculator to determine shipping costs. Shipping to a commercial location with loading dock or forklift is always the cheapest option for freight. Rush Delivery is available upon request. Please e-mail for quote(please include zip code) Handling Time is normally only 1 business day. Please use the shipping calculator to determine transit times. Holidays are an exception) Your tracking number will be emailed to you once your order has been shipped. A note to international buyers: FedEx International Economy& Priority shipping services are available for qualified packages worldwide. FedEx International ground service is available for Canada& Mexico. Package tracking and improved delivery times are advantages over USPS. E-mail us for a shipping quote. Please provide destination city, country, postal code, broker and broker phone number. CSI Surplus is not responsible for any duties. Taxes or any other fees that may be impose
|
|
|
ITW Gema Volstatic PGC1 Manual Powder Coat System w/ ITW Gema PG Manual Gun. Unit has been tested.
|
|
|
Foam Sealant. Dap 12 Oz White Dap-Tex Plus Window& Door Foam Sealant LATEX BASE C2-2-12 Powered by
|
|
|
This is a package deal that comes with a like new(used only 5 times) dual voltage powder coating system with 7 powder colors and some other misc. supplies like metal wash. Silicone plugs, etc. The colors included are 8oz red, blue, and purple metallic starlight translucent, black stardust, black wrinkle, chrome, and white. A few of them have less than 8oz but 3 of them are unused and the others aren't missing much. It's a great system and covers well. The colors are great too. We just decided that we would rather send our work out for coatings than do them ourselves- you need a very well ventilated area to do this in.
|
|
|
PLEASE UNDERSTAND LISTING BEFORE BUYING" GEMA" TOP BRAND POWDER SPRAYING SYSTEM.BOUGHT FROM AN OUT OF BUSINESS FACILITY ACCORDING TO PREVIOUS OWNER SYSTEM PERFORMED WELL LAST TIME IT WAS USED KEPT IN A VERY CLEAN ENVIRONMENT AND WELL TAKEN CARE OF. PLEASE JUDGE BY CHECKING OUT THE PICTURES UNDESTAND IT HAS NOT BEN TESTED BY US(NOT EXPERTS) HAVE NO KNOWLEDGE ON THIS PARTICULAR FIELD BEING THAT UNDERSTOOD- SOLD AS IS- NO RETURNS WE TRY TO DESCRIBE ITEMS TO THE BEST OF OUR ABILITIES IN THIS SYSTEM YOU'LL RECEIVE: 1) GEMA VOLSTATIC TYPE PG-1 POWDER GUN 1) GEMA VOLSTATIC PGC-1 POWDER- POWER SUPPLY BOX AND EVERYTHING SHOWING IN PICTURE(NOTHING ELSE) ALL SALES ARE FINAL- NO RETURNS QUESTIONS ARE WELCOME QUICK PAYMENT IS APPRECIATED! THANK YOU!
|
|
|
You are bidding on a GEMA PGC1 Automatic Gun Controllers with Cabinet and 10 PG2A automatic Guns. This system has been completely cleaned and had Any wore or broken parts replaced. The PG system was the top of the line Cutting edge technology of its time. This Powder Coating system is in excellent condition and ready for use. Bid Now. Bid Often; T his system is not going to hang around long.
|
|
DriQuik Infrared Oven Control Panel for Powder Coating System Visit My eBay Store: sell1rite Conditions of Sale Shipping or Pick Up Information Sold"As Is" no refunds are being offered on this item. All sales are final. This item is available for local pickup only. Rigging. Loading, and Freight are Buyers Responsibility. We will assist in loading this item if needed. Item is located in Adairsville. Georgia. 30103 Payment Information Payments are accepted through Paypal. Including Credit Card Payments. Payments are expected to be made within 3 days after auction ends, or immediately following a"Buy Now" listing. We charge sales tax to all sales within Georgia(GA) USA. Feedback Your satisfaction is our utmost goal! If you are happy with your product. Please leave us a positive ... morefeedback and 5 star Detailed Seller Rating. We will leave you a positive feedback as soon as the feedback process is completed. Should you feel that we deserve less than a positive feedback or we did not deliver a 5 star service. Please contact and give us a chance to turn your dissatisfaction to a pleasant eBay experience. If you have any questions or concerns. Please do not hesitate to contact us though eBay.
|
|
|
There are 8 each Gun Controllers mounted in a rack with a Master Control unit. Some cables are attached as well. All items pictured will be included. The pallet will weigh approx 300-400 lbs and will ship from zip code 30553 Buyer will prepay freight and make shipping arrangments 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143204b1803-0xe7-
|
|
|
Available For Sale* 5 ITW GEMA 150mm Gun Extensions These Extensions Fit the Opti Select and Easy Select Powder Guns Brand New These Extensions Go for $420.00 ea. We Are Asking $252.00 ea.
|
|
|
Xiom 1000 Polymer Spray System The complete multicoat system consists of the Scorpion 5000 gun. Portable console, powder feeder, hoses, Thermal Accelerator System, propane tank, manuals and misc. items. The manuals are very informative. It's a Very Nice Machine! We bought it last year. But due to a serious accident, never used it and now have to sell it. To buy this brand new would cost over $15.000.000 Please pay within 24 hours. Paypal only. This machine needs to be picked up within 7 days. You can arrange the shipping of this item. It weighs about 300-400 lbs(this is our best guess)
|
|
|
Assorted Nozzles for Nordson Prodigy System. We had one for a while but sold it. We have a few spare parts left over.
|
|
|
This listing is for a Nordson Multi Wrench. In good used condition as seen. 13/16.5/8,1/2, open end and 1/2,7/16 box end. Thanks for looking good luck bidding. Local pickup available in Evansville In. I Work Days. So questions will be answered as soon as possible usually in the evening. Payment Expected within a day or two. The Sooner its paid for the sooner its shipped. After 7 Days Ebays Unpaid Item Assistant will automatically file Unpaid Item Claim. This will not affect Transactions with prompt Payments. International shipments may have to pay and will be responsible for any import fees and or duties due. Check your countrys requirements for more information.
|
|
|
Used Kremlin 10-14 Airmix Pump. Kremlin MX Gun and More. Auction includes. USED) Kremlin 10-14 Airmix Air Assisted Airless Pump with mounting bracket, Kremlin MX Gun, Pick up tube and hoses. The Kremlin(Air-motor) needs one Air Regulator and ground cable. This sale does not include the Fluid Section only pick up tube. This did come from a working environment, but has not been tested since removed. And can not be tested any further by me, so is being sold AS IS Parts Maybe More. Kremlin is known world wide as the premier manufacturer of spray equipment, and this is a great opportunity to upgrade your shop. This is a used unit and could use a good cleaning. All Pictures are actual. Thanks for looking. Winner pays postage. Only Domestic USA only.
|
|
|
This is an old bottle of Plasti Dip. There is some in it but it's all dried up, I'm not sure if anyone would be interested in it but I thought I would give it a shot.
|
|
|
Eurotec 400 Series Boxfeed Unit. Working well when plant shut down.
|
|
The modular powder feed pumps are venturi type pumps used for most. General powder coating applications. Three different pumps are available. The pump type. Corona or Tribomatic, is matched to the spray gun type. Pump mountings kits. Air tubing, and powder feed hose are optional and. Must be ordered separately. 8-mm air tube fittings. Single locking flat on nozzles and throat. Smaller diameter pump cavity than the 6-mm Corona pump. Product Lines Used With: 100 PLUS. Econo-Coat, Sure Coat, and Versa-Spray. Air Pressures 1: Flow Rate 1.0 bar(15 psi) Atomizing 0.3 bar(5 psi) Powder Feed Hose: Length 4−10 m(13−39 ft)2. ID 11-mm(0.44-in. ID 3. 1 These pressures are average starting points. They can be raised or lowered to achieve the desired. Delivery volume and cloud density. 2 Hose lengths longer ... morethan 8 m(27 ft) may result in lower powder output. 3 Recommended starting point. Depending on your configuration. You may need to default to 12.7-mm. 1/2-in. ID powder feed hose for higher flow rates or longer hose lengths.
|
|
This used oven system has been completely refurbished including new Midco International Inc. burner model RE4400DS rated 400.000 btu. To see more information on this gas fired burner system, go to the website and query this burner. The blower. Pillow blocks, shaft, motor are new and have a 1 year warranty. Unit is furnished with a New control panel. Including a new Dwyer Instruments model 16B33 digital control preprogramed to 500F degree. This unit will be factory pre-wired and completely tested prior to shipping. Due to the fact that all items are brand new on this system. We will apply our standard factory warranty of one year on any defective parts which fail during operation. Unit is fob our Duarte, Ca facility. Freight not included. Our firm has been building oven units for over 40 years ... moreand we have several of our systems here on ebay for you to view. If you have any questions regarding this unit. Go to our website at and send us an email or contact us directly at 626/305-0202. Please advise any questions you may have. very truly. Milmetco Systems. Inc.
|
|
|
USED CUSTOM BUILT INDUSTRIAL POWDER COAT GAS OVEN 6' X 6' X 8' ON STEEL CASTERS. OVEN IS 6' WIDE X 6' DIAMETER X 8' HEIGH I HAD THIS CUSTOM BUILT FOR POWDER COATING 2 SIDE BY SIDE STEEL DOORS WITH TRACTOR TRAILER STYLE HITCH SOLID STEEL INSIDE WITH INDUSTRIAL GRADE INSULATION. SHEET METAL ON OUTSIDE. THERMOMETER AT TOP& MID BOTTOM W/ ELECTRIC SPARKER IGNITER BUILT IN TRACK TO MOVE PRODUCT IN/OUT OF OVEN TRACK STARTS OUTSIDE OVEN AND TURNS INTO A 90 DEGREE ANGLE AND IS CENTERED ON THE TOP OF OVEN. PLEASE CONTACT ME MY EMAIL FOR ANY FURTHER QUESTIONS. CLOSING BUSINESS AND SELLING ALL EQUIPMENT DUE TO BIKE ACCIDENT. THANKS GOOD LUCK BIDDING.
|
|
The vintage book by William E. Hague. Is in excellent condition. Part of the Amy Vanderbilt Success For Women series. This how to decorate with color has beautiful illustrations of house decor. And working with color in it. There are also instructions on different colors and decorating for various seasons. Color mistakes, etc. Very interesting and informative book for decorating your house. Even though times and colors have changed. There are still useful tips and hints to follow. Shipping Information: I always ship one business day after receiving payment. However. T he local Post Office does not sort and ship. But sends to another town for the actual shipping. Please keep this in mind when considering less than a 5 star rating. As this is their procedure. Descriptions: Many of the items ... moreI sell are purchased from estate/yard sales and auction sites, and do not know what they may have been exposed to such as pets. Etc. I am not an expert or professional. But will do my best to describe items as accurately as possible. Making sure my customers are satisfied and happy with their purchase is my main goal. I do accept returns. But if there is a concern with your purchase. Please let me know first. As I will gladly work on a resolution with you. Please feel free to ask questions before bidding. As I will be happy to answer them. Please be sure to look at my other items. As I will combine purchases to save you on shipping.
|
|
|
Used Bayco gas fired industrial burn off oven. Oven measures 42" wide by 48" long and 48" tall(40" above cart) on the inside. Comes with cart and some exhaust stack. Can strap to skid and load onto purchaser provide truck. Thanks for looking.
|
|
ITW Gema Powder Coating System Item: 3540 See photos for model number information Dimensions: 36"L x 25"W x 47"H Shipping Size: 48"L x 40"W x 52"H on a pallet Weight: Approx. 200 lbs. General: This is a used ITW Gema powder coating system with powder gun. Controller, vibratory stand with fluidizer, 3 lbs. hopper/canister, and some small spare parts. It is operational. This system is sold“AS IS” with a 30 day return. Buyer pays all shipping costs. This item may be for sale locally. Seller has the option to end the listing prior to the scheduled end date. Payment: We accept Pay pal. Credit Card over the phone, Wire transfer, and Company Check. Item usually ships 1-2 days after payment has been received full and clear. International shipments require broker and additional ... moreinformation for customs. Shipping: We recommend shipping this item by Common Carrier Freight. Or flatbed, or you can pick it up with proper equipment. Please call us for an accurate shipping quote before bidding. eBay may display an inflated shipping price. Item will be banded to a pallet. Cardboard, and plastic wrapped for protection. Furnace Brokers. Inc. 860-875-3712 Please visit www.FURNACEBROKERS.com to see our full inventory.
|
|
|
ITW Gema System Specifications Easy 01-F/ 02-F Make: ITW Gema Model: CG01 Type: Easy Serial No: 13201.14925 Year of Manufacture: 2005 Input Voltage: 90-264 VAC 47-440 Hz Input Power: 65 VA Degree of Protection: IP54 Corresponding Gun: GM01 Easy Select dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1447034b7a5-0xf1-
|
|
|
We are selling our extra unit as we already have a wall mounted unit and just haven't had the need for two units. It works and operates great as any gema you can count on it for small batch jobs or entire runs. Comes with box shaker and feed that can handle small amounts of powder to 50+pound boxes. Control unit is Gema Optistar with an Optiselect gun which allows adjustments by the gun. Also includes 6 feed hoses so you can keep colors/metallics separated(so you are not using white in the same hose as red) All hoses. Feed pump, extra tips and parts included. Posted with
|
|
|
Eastwood Hot Coat powdercoating kit with a 3/4 full jar of gloss black. Model 10198. I picked this up at an estate sale and never used it.
|
|
The Exhaust system has openings in the front for pocket and blanket filters. The opening is 27 1/2" by 52" On the back it has two installed Biomax Filters 30" W by 5 7/8" D by 24" H. Replacement PART NUMBER-H22A1X1 and SKU139 BioMAX HEPA Filters are designed to provide the highest level of filtration available for commercial and industrial applications. They are widely used in hospitals. Clean rooms, pharmaceutical plants, and in hundreds of other systems where clean air is critical in the protection of people, processes and equipment. BioMAX HEPA Filters are constructed using the highest quality components available and are available in efficiency ratings of 99.97% 99.99% and 99.999% on 0.3 micron size particles. On Oct-08-13 at 10:41:39 PDT. Seller added the following ... moreinformation: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Bayco Oven Stacks Cleaning Equipment: Three 6ft. Sections. One 3ft. Section. Please call our office for additional details on this item. Stock# 1040) We do combine shipping based on the actual cost to ship. Check out our other items on our ebay store. Visit us at We sell new& used engine rebuilding equipment. Parts, and machines. This will need to be shipped or picked up at our Highland. MI facility. Thank You, RT Sales Office: 248-887-0422 Office Hours: Mon.Fri. 9am to 5pm a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1447ab6d1b2-0x108-
|
|
|
ITW Gema 200 lb Fluidizing Hopper Includes: Sieve. Accumulator& Cart. Shipping available. Call Rob for more information 9203615208 x402. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1447ab6d177-0xe2-
|
|
|
Slightly used bottle still plenty left. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1447ab6d1c5-0x110-
|
|
|
Dupont Master tint 1009s 3/4 full I have a full system text or call for interest 973-723-4381
|
|
|
Dupont Master tint 1010s Red Satin Pearl 3/4 full changed paint systems I no longer need Thanx Joe I also have more tints if interested 973-723-4381.
|
|
|
Xiom 1000c system with 1000 gun and 5000 scorpion gun System Includes: propane tank 15lb- oxygen tank- powder(non skid gray.Yellow, genetian blue, red, white, beige and more) portable cart This Xiom system is a great opportunity for someone who is interested in doing mobile Power-Coating. System is in great condition and working order. No oven required just spray and parts are ready. The system includes a variety of colors and textures to get your business up and running. Any questions please feel free to contact me at any given time.
|
|
|
Available For Sale* 5 ITW GEMA 300mm Gun Extensions These Extensions Fit the Opti Select and Easy Select Powder Guns Brand New These Extensions Go for $480.00 ea. We Are Asking $288.00 ea.
|
|
|
1- ITW Gema OptiTronic Stirring Powder Coating System With Easy Select Gun This Unit is being offered for a starting bid of $3.500.00 To Purchase This Type of Equipment Brand New Today Would Cost $8.000.00+ The EASY 1-S/ EASY 2-S Electrostatic Powder Manual equipment with the EasySelect Manual powder gun is ideally suited for manual coating of objects in small series. This System Is Excellent for the application of All types of Powder Coating Material and Dry Lubricants dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1447c206804-0xf3-
|
|
GEMA…top of the line powder coating system. One PG1 gun and one PGC1 control plus powder pump and vibrating delivery stand on wheels. Operator says"don't sell… its better than the new system" Accountant says"its got to go" This unit has been well maintained and still works very well after years of service. The 110 volt vibrating box stand fluidizes the powder for easy delivery by the pump. The gun delivers a steady cloud of powder for a consistent level of powder application. If your current system isn't working right. This unit is your solution. The total weight of this unit is 100 lbs. To ship UPS. The control and gun would ship at 30 lbs. and the box stand would ship at 70 lbs. The freight calculation below may not be correct, but the buyer will be responsible ... morefor the total freight cost. The unit will be packaged at no additional charge. Shipments to Ohio ONLY business address or terminal is $65.00. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1447c2069a9-0xfa-
|
|
|
Sames 8 gun powder coating fluidizing hopper sold as is
|
|
|
Nordson Versa Spray(8) Automatic Powder Gun Controller w/hopper& nozzles has 8 gun controllers. Nozzles, hopper, tree, hoses let me know if you have any questions 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144830e0389-0x102-
|
|
|
1) Reclaim Powder Coating System Ultra 100 w/cart ECG-10 let me know if you have any questions g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144830dffb7-0xf8-
|
|
|
1 used Wagner EPG2007 Automatic Powder Coating System
|
|
|
1 used powder coating system by northern industrial. let me know if you have any questions
|
|
|
This is a SLIGHTLY USED Etch-O-Matic. It was used only a few times and put into a storage cabinet and forgotten. The kit includes everything in the picture. One of the stencil kit has 50 pieces. The other about 25. The bottoles of Neutralizer, Electrolyte General Purpose and Electrolyte Stainless Steel are each more than half full. The case is in good shape. The latch work fine.
|
|
|
Nordson Sure Coat Manual Powder Coat System w/ Box Feeder Includes: Nordson Sure Coat Controller, w/ Power Cable. Nordson Sure Coat Manual Gun, w/ Gun Cable& Air Fittings. Box Feeder Cart, Unit has been tested and is in full working order. Shipping available- Quotes available upon request. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 Option#5 for more information.
|
|
|
Gema powder coating kit including sprey gun and digital box.works good. comes with two boxes for powder.
|
|
800x600 800x600 800x600 B-250: Nordson Excel 2002 Powder Booth System Type of System: Side-Draft Reclaim Powder Booth Profile opening: 5’0” wide x 7’0” high(Can be modified) Dimensions: 29’ long(22’ inside) x 15’ wide x 10’8” high Estimated Plant Utilities: Electric: 240/480. 3-phase, 60 hertz, Control– 110 volt System specs& components: 1) Booth Base Assembly. 1) Stainless Steel/ Poly Upper Housing. 4) Manual Operator Openings(Can be converted to add Automatic Guns easily) 1) Fan Section-10.800 CFM, 100 fpm face velocity(1) Powder Coated Collector Module. 1) Direct Vent. 4) Powder transfer kits(2) Operator Platforms. 1) Master Electrical Control Panel. 1) Pneumatic Control Panel. Removed From Service in- 04/2014. Spare Color Modules. Hoppers, and Guns Available. Normal 0 false false false ... moreEN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Additional features such as collector modules. Hoppers, automatic and manual guns, etc are available for purchase as well. Should you have any questions please call Nick@ 920.361.5208 x 206. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
800x600 800x600 B-249: Nordson Excel 2001 Powder Booth System(2-Available) Type of System: Side-Draft Reclaim Powder Booth Profile opening: 4’0” wide x 7’0” high(Can be modified) Dimensions: 29’ long(22’ inside) x 15’ wide x 10’8” high Estimated Plant Utilities: Electric: 240/480. 3-phase, 60 hertz, Control– 110 volt System specs& components: 1) Booth Base Assembly. 1) Stainless Steel/ Poly Upper Housing. 2) Manual Operator Openings(2) Automatic Gun Openings(1) Fan Section-7.200 CFM, 100 fpm face velocity(1) Powder Coated Collector Module. 1) Direct Vent. 3) Powder transfer kits(2) Operator Platform. 1) HTM-16 150# lb capacity hopper(1) Powder Accumulator with Inlet Ports. 12) Versa Spray II Automatic Powder Guns(12) Versa Spray II Automatic Controls. 12) Gun Mounting Bars. 12) 100 Plus ... morePowder Pumps. 12) 100 KV Gun Cables. 1) FS10R Fire Detection System. 1) Master Electrical Control Panel. 1) Pneumatic Control Panel. Removed From Service- 03/2014. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Additional features such as collector modules. Hoppers, automatic and manual guns, etc are available for purchase as well. Should you have any questions please call Nick@ 920.361.5208 x 206. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
Nordson Powder Coat Spray Booth Type of System: Side Spray Powder booth Profile opening: 36" X 48" Openings. 12' long Poly spray enclosure Nordson 8-head automated paint system Plant Utilities: Electric: 240/480. 3-phase, 60 hertz, Control– 110 volt Partial System specs& components: 1) Booth Base Assembly(2) NPE-2m hand gun(3) NPE-H2 feed hopper(4) Cable hv 4m auto gun(5) Pump 4 gun high mount(6) Pump transfer(7) Direct vent plate assembly(8) Master Electrical Control Panel(9) Pneumatic Control Panel(10)Dryer refgr. air 1805 cfm Additional features that are not listed will be available for discussion. Should you have any questions please call Jean@ 508-549-2747 Buyer is responsible for disable and rigging cost of unit from facility to destination of choice. All shipping costs ... moreMust be paid in full within 7 days after auction ends.
|
|
Item Description CONTROLLER NORDSON Part#144917D Weight:28.61.lbs About Us CNC Salvage. LLC. is an online resource for procuring Industrial Automation Spare Parts, both new and used. Items offered as"new" are generally surplus items from an Industrial Facility that was excess or obsolete and removed from their inventory and sold to CNC Salvage. Items listed as"used" are generally working pulls from a plant decommissioning project. These items are not pre-tested and are shipped"as-is" The goal of CNC Salvage is to be a low cost provider for material that is used or excess and to supply that material quickly and easily to the end user or 3rd party repair organization. hi Returns CNC Salvage. LLC. must be contacted through eBay before sending a unit back for any ... morereason. CNC Salvage must be contacted within 7 days after the item has been received. Returned items must be packaged properly and received within 14 days after the end of the auction. CNC Salvage reserves the right to replace the item in kind or refund the purchase price of the item. Refunds will be issued only upon receipt of item in good condition if a replacement if not available. We will make every effort to supply a working replacement! CNC Salvage does not pay for return shipping or refund original shipping. We will not accept returns due to ordering the wrong part number. Please be certain that the part number purchased is correct hi Warranty/Liability You acknowledge your understanding that the items CNC Salvage. LLC displays and sells at this site are surplus and/or previously used. All items displayed at this site are sold AS IS, WHERE IS, and AS DEPICTED, with all faults, defects and imperfections acknowledged and waived by you, and without any warranties of any kind(see DISCLAIMER OF WARRANTIES below) This does not mean the items displayed at and sold through this site do not work. It does mean that CNC Salvage, LLC has not tested the items or assessed their performance or operation, and that CNC Salvage, LLC theref
|
|
FREE SHIPPING! This is a used PSS SpectraCoat ES-02 Powder Coating system from Powder Buy The Pound. I used it on 3 different occasions. It is virtually brand new. And nothing is wrong with it. It is pretty much identical to the new ES-02-P on their site, except mine is 2 years old as of 3/6/14. It has sat in a box and a tote in my garage for over a year and a half. It comes with everything listed in the manual: Control Box, Spray Gun, Clear Hopper Pressure Hose, Powder Feed Hose, Fan Tip Electrode, 6 Conical Nozzles, Standard Tip Electrode, 6" Extension Electrode, 1.5 lb Pressure Hopper, Power Cord, Ground Cable, Rinse Air Hose. I am selling because I have no room for an oven to heat the parts. Check my feedback and bid with Confidence! This is 2 yrs old. And being sold AS-IS, No Returns. ... moreI only accept Paypal, and I only ship to the U.S. Please ask any questions before bidding and I will be glad to answer them to the best of my ability! a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144ba1451cf-0xfd-
|
|
Electrostatic Coating Mixing Nozzle Material Handling 316 Stainless Aluminum Apparently ionized air was pumped through the stainless steel pipes on the side of this unit to get the material to not stick on its way to the charged target. High quality construction. Stainless steel on aluminum mounting. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. ... morezmw3-r2-s1_gsrx_vers_526(GS 6.6.6(526)
|
|
|
Nordson Horizon 200 Color change modules Cleaned and read to ship.
|
|
|
I have a Gema PGC1 Lab unit for sale. I've had it in the shop as a back up for a while& no longer need it. It works fine& I've never had any problems with. If you have any questions let me know. Thanks.
|
|
|
These two Nordson automatic gun oscillators have been tested and are working properly. They are 120 volt with independent variable speed controllers on each unit. They also come with in/out gun movers. They include 12 each 36" gun mounting bars. No positioning controls are included. Customer to pay freight.
|
|
|
This is a great tool for the gel coat finishing process. I just used it to finish my boston whaler and it works awsome. There's nothing wrong with it. Although it may not look brand new. It still performs as if it were. It comes complete with the box brush and instructions. Feel free to e-mail any questions you may have, happy bidding. Thanks for looking.
|
|
|
Dupont Master tint 1006s 3/4 full Posted with eBay Mobile
|
|
|
Habor Freight powder Coating gun This gun is new the cups where used with my other gun thats why I'm listing it as used. Winning bidder will get 2lbs of harbor frieght powder Red and Black and 5lb bag of practice powder never used it so couldn't tell you the color. Any Questions Please ask USA SALES ONLY
|
|
|
Everything in working condition I just don't have a place to use this anymore. Action includes 6 powder coat paints Control box Hopper Gun Assorted nozzles and tips Hoses and wires Aluminum/ steel phosphate Tape Manuel's Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144d6e3b154-0x10a-
|
|
ARTS PAWN SHOP(562) 695-4640 QNIX 1500 QUANIX AUTOMATION PAINT COATING THICKNESS METER GAUGE! NO RESERVE! Get the right tools for the job with this QNIX 1500 QUANIX AUTOMATION PAINT COATING THICKNESS METER GAUGE! Get the right tools for the job with this QNIX 1500 QUANIX AUTOMATION PAINT COATING THICKNESS METER GAUGE! This is a used QNIX 1500 QUANIX AUTOMATION PAINT COATING THICKNESS METER GAUGE and this one is in great shape! Only some minor physical wear! Has been tested and works perfectly! This amazing meter has an amazingly wide measuring range of up to 200 mil. with no time consuming calibration process required! The special design of this gauge facilitates measurements in hard-to-reach corners. Even more so because of the duplex display and the memory for the last measured value! The ... moreQnix 1500 features two non-wearing probes, Fe-probe and NFe-probe which are integrated right into the housing! The Fe-probe measures all non-magnetic coatings such as lacquer, plastic, enamel, chromium, copper, zinc, etc. on steel or iron while the NFe-probe measures all insulating coatings such as lacquer, plastic, enamel, etc. on non-magnetic, metallic substrates, i.e. aluminum, copper, brass or stainless steel! The simple and flexible use, even at wide stretching surfaces is appreciated by automobile appraisals around the globe! Perfect for a professional body shops or even the serious DIYer! This one does it all! Made by Qnix, one of the most trusted and reliable names in coating meters throughout the world! you can't go wrong with this one! Meter comes with instructions, Standard Fe test plate, battery and carry case! Don't let this great deal on an amazing meter pass you by! Any questions. Please ask. If you are in need of a item like this then don't hesitate and BID NOW! All items come exactly as pictured. Everything included with this item is pictured. If you have any questions. Please ask. PAYMENT POLICY WINNING BIDDERS ARE REQUIRED TO MAKE PAYMENT WITHIN 7 DAYS OF THE AUC
|
|
|
ITW Gema PG1 Manual Gun 150mm Nozzle Extension in good working Used condition. ITW Gema Part# 347310 Posted with
|
|
|
WAGNER AIRMATIC PROFESSIONAL POWDER SPRAY GUN" USED" MODEL- PEM-C2 WITH CABLE HOSE VERY CLEAN IN WORKING ORDER SELLLING FOR A GOOD COST BID OR BUY IT NOW! SOLD AS IS- AS STATED ABOVE. ALL SALES ARE FINAL- NO RETURNS QUESTIONS ARE WELCOME QUICK PAYMENT IS APPRECIATED! THANK YOU!
|
|
|
ITW Gema Optiflex Manual Powder Coating System. Includes: ITW Gema Optistar CG07 Controller. ITW Gema Optiselect Manual Gun. Manual gun cable. Power cable. Uni. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 Option#5 for more informationt has been refurbished. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144ed0ae033-0x109-
|
|
|
WAGNER AIRFLUID PROFESSIONAL POWDER SPRAY SYSTEM" USED" IDEAL FOR PRODUCTION RUNS ETC UNIT IS CLEAN& IN WORKING ORDER MODEL- EPG-2007 WITH POWDER GUN MODEL- PEM-T1 COMES WITH MANUAL SYSTEM IS READY TO WORK! PREFER LOCAL PICK UP ONLY BUT WE'LL CONSIDER SHIPPING FOR $295.00 WITHIN USA ONLY SELLLING FOR A GOOD COST BID OR BUY IT NOW! SOLD AS IS- AS STATED ABOVE. ALL SALES ARE FINAL- NO RETURNS QUESTIONS ARE WELCOME QUICK PAYMENT IS APPRECIATED! THANK YOU!
|
|
|
Used Nordon Vantage FCM 6400 Collector Module Unit is in working condition and is perfect for a powder coat batch oven spray booth. Used primary and secondary filters are included and were well within tolerance on the magnehelic gauge at the time of shut down. 2 KVA transformer shown under the main control panel was used to run separate light. Unit is in Austin. Texas.
|
|
|
up for sale is a used ITW Gema EASYTRONIC. The controller. Pump and box shaker works fine, the gun does not seem to work and we think is has a bad cascade. It was working when I first got the system but it stopped creating a charge while spray. Maybe it can be used for parts or someone will want to repair and use it. SELLING AS IS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-145129a569c-0x103-
|
|
|
Auction is for 8 Cans of AERVOE Marking Paint. 1395 Fluorescent Red- Orange. ALL NEW with top seal& Rust-Oleum Marking Wand# 2393000. Wand is USED and missing the Wheel. Some people don't use the wheel anyway. Great setup for marking buried utility lines or property lines. Check out my! Thanks for Looking and Bidding. Please Ask Questions, I will Ship ASAP after payment is Complete, I will also refund any extra shipping that is paid, Sorry for the Low Feedback this is a NEW account, I have been selling on Ebay for 10+ years. Payment due in 3 Days. If you have any problem with your item Please contact me first. Thanks
|
|
|
Item includes gun controller. Gun, cart, and fluidizing hopper. Buyer responsible for all shipping arrangements. We will band to a pallet, shrink wrap, and place on a truck
|
|
GLA Finishing Systems Nordson Powder Boot System*3 station Aqueous wash system-Honeywell natural gas valve/controls-1 wash tank(7'W x 10'L x 32"T) Gusher 5 HP pump-2 tank. Rinse(66"W x 7'D x 32"T) Gusher 5HP pump-newer-3 tank. Rinse(60"W x 7'D x 32"T) Gusher 5HP pump*JBI spray booth systems exhaust blowers through roof*Max opening is(60"T x 23"W) for wash*108 spray nozzles in#1 wash station*60 spray nozzles in#2 and#3 wash(Ea. Carbon steel and SS construction*Quartech Corp Human Interface Controller GLH/ New England Oven and Furnace Drying Chamber*32' long drying zone*Honeywell gas burner controls*Carbon steel construction w/ galvanized insulated panels on exterior*10'T plus burner box=5'=15'T*2 exhaust blowers on top*New York ... moreblower for heat Nordson Automatic Powder Booth Versa-Spray*6 guns=3/side*New flame detector by FSC-ad(dual) Nordson digital HIM*Auto cycling guns-radial oscillatory*manual spray opening*Just booth. Not entry to controls(14'L x 11'W) JBI Spray Booth Manual Touch Up Spray Booth*Nordson spray gun model suol coat with color pots- 9 SS cans*Complete with filtration system and blower-Photohelic filter monitor-Auto filter shake/ clean system*Atlas Copco FD90 compressed air dryer with filters and 30 gallon storage tank New England Oven and Furnace Curing Oven*3 pass conveyor in oven*Honeywell digital controllers*Honeywell gas controls- natural gas*1o5 million BTU-Blowers front and back-burner box on top Entire system is running and making quality powder jobs daily. Includes all spare powder cans Call for rigging and hauling quotes. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-145201cc21a-0x113-
|
|
|
Wisconson batch oven with nordson gun and racks.
|
|
|
older quality brass interlocking stencils. letters. Numbers, and money.black letter font. heavy duty brass. they are a parcial set. see pictures. original bottom box. i am cleaning out an estate, if i find more i will let you know.normal wear and tear. maybe tthis lot can help you complete your own set. thank you for viewing my item.
|
|
|
The following Iontech(Parker Ionics) 220 liter powder coating hopper is available and in great working condition. These units have recently been removed from service and cost over $5.000 new. These can be retrofitted with Nordson, Wagner, or Gema pumps. FOB: Berlin. WI = Posted with the
|
|
|
You are bidding on a Hot Coat Pro 1100 in the Original Box. This item has been tested and is 100% Fully Functional. What you see in the Pictures is exactly what you will be receiving! Please feel free to ask any questions before bidding and don't forget to check our feedback! Thanks and Happy Bidding!
|
|
EUROTEC GCU 400 Powder Coating Box Feed System You're bidding on a used EUROTEC GCU 400 Manual Powder Coating System(box feed) This unit is a good working professional powder coating system built well and with proven technology making them one of the leaders in the powder coating industry. The system was used for color samples/tests and as you can see is in excellent condition. This Auction includes The EuroTec GCU 400 powder coating system mounted on the box feed cart just as it is pictures as well. 2 EuroTec Guns, 2 Gun Cables, 2 Power Cables and a short powder hose which we used. This is your chance to get a great deal on a professional system, The extra gun/cable included in this auction is really a great bonus as they are expensive! Here is just a little information on this system. ... moreEUROTEC GCU 400 has a unique charging system giving automatic control of both current and voltage. Gives improved safety. Efficiency of charging, minimum surface disruption and unrivalled recoatability. Colour changes in seconds- simply unclip the venturi, remove the suction tube and blow clean. The turbine vibrator accepts all popular powder containers up to 30kg(66lbs) Controlled powder support arm simply lifts clear to a park position for fast box replacement when changing colours. SHIPPING We'll Ship within Canada or the United States Only. We have a flat rate fee of $150.00 to ship. If you require insurance I will let you know the additional cost. If you have any questions on regarding this auction. Email and we'll reply as soon as possible. Happy Bidding:
|
|
|
item includes gun. Cart, and fluidizing hopper. Buyer makes all arrangements for shipping. We will band to a pallet, shrink wrap, and place on a truck. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1454ce07111-0x10c-
|
|
Brownells Bake-On Finish Oven Used but works great! Slight Shipping Damage This oven was used in a professional gunsmith shop to bake on Cerkote gun finishes. It can be used for a bunch of other finishes as well and is perfectly sized for gun parts. We have moved on to a bigger oven. And no longer have a need for this one. As noted, there is a bit of shipping damage that is cosmetic only due to poor original handling from Brownells. We were in a hurry and they were on backorder, so after the initial wait from the factory, we were not in a position to return and wait for a mint unit to be reshipped. The model is slightly different than the current model pictured on Brownells website. But it is only a year old. Their description below: Our high efficiency oven is custom engineered to ensure ... moreuniform and complete part curing while delivering a“tough-as-nails” baked-on finish when using Brownells Gun-Kote or Teflon®/Moly oven cure finishes. Advanced technology combines two separate heating elements with a high-tech interior surface to optimize airflow and ensure consistent temperatures that help prevent hot spots. Surface blemishes, and discolorations. Thermostat adjustable from 100° F to 400° F for precise temperature control during large or small production runs. Adjustable, 60 minute countdown timer turns oven on when set; audible bell alerts you when time is up, and oven turns off. Separate“constant on” position works like a manual override to bypass the timer and allow oven run-times longer than 60 minutes. Front mounted temperature gauge provides accurate, real-time temperature monitoring. Oven panels are insulated with over 5 lbs. of high density, energy-saving fiberglass to prevent heat loss and reduce operating costs. Four, removable drying racks allow you to optimize interior space and maintain full capacity. Two ceiling mounts, with five holes each, allow you to hang parts up to 42" long. Extra long power cord for easy setup in a variety of locations, plus a panel-mounted electrical fuse
|
|
|
For sale I have an Eastwood Dual Voltage powder coating gun. I tweaked the gun a bit to make it perform a little better. I can also provide the buyer a few tips on how to get it to really work for you. Also included are 12 powder bottles. You will find these very handy for quick and easy color changes. I also will include a digital regulator on the gun. I also have about 5 pounds of gloss black. Clear, and bright red powder I will include if sold for $200+
|
|
3 STAGE WASHER– STAINLESS STEEL Part Opening: 30 In Wide by 72 In High Stage One: 1 0 Ft of Spray Heated Nat. Gas– 135 Deg. Clean 1800 Gallons Spray Pressure 4-10 PSI Drain: 4 Ft. Half Back to Stage. One. Half to Stage two Stage Two: 6 Ft of Spray Ambient Rinse 800 Gallons Spray Pressure 4-10 PSI Drain: 4 Ft. Half Back to Stage. two. Half to Stage three Stage Three: 6 Ft of Spray Ambient DI Water Rinse 800 Gallons Spray Pressure 4-10 PSI Exit Vestibule: 6 Ft $60.000.00 Already removed from production, control box is already capable of controling 5 stages, we can build an additional 2 stages for you if requested at an additional cost. This washer is in the Syntec Systems Corp. Equipment facilities located in Saukville Wisconsin. Visit collinsfinishing.com to get more details about our services ... morewe offer our loading sevices for this washer, we will load it on your truck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1455f1452e3-0x114-
|
|
|
This is a Nordson 16 automatic gun powder coating system with main controler and complete cabinet. All the automatic guns are versa spray II and the system comes with all the gun cables all the controlers are Sure Coat controlers. This system came out of a working production line. All controlers and guns operated as they should.
|
|
|
As is seen in picture Posted with g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-1456a276026-0x10f-
|
|
|
For is a USED NORDSON VERSA SPRAY POWDER COAT COATING SPRAYER GUN& HOSE Part Number 132746A What you see in the pictures is what you will be getting. It came from a manufacturing company that was foreclosed on. PLEASE READ BEFORE YOU BUY. I bought several guns. Cables and other powder coating parts that I will be listing soon. I know nothing about what any of it is or anything about it, so I am selling it like I bought it, AS IS! A lot of the parts that I will be listing will be new parts. But this is a used gun. Lot# 1 Thanks for Looking
|
|
3 STAGE WASHER STAINLESS STEEL Part Opening: 30 In Wide by 72 In High Stage One: 1 0 Ft of Spray Heated Nat. Gas– 135 Deg. Clean 1800 Gallons Spray Pressure 4-10 PSI Drain: 4 Ft. Half Back to Stage. One. Half to Stage two Stage Two: 6 Ft of Spray Ambient Rinse 800 Gallons Spray Pressure 4-10 PSI Drain: 4 Ft. Half Back to Stage. two. Half to Stage three Stage Three: 6 Ft of Spray Ambient DI Water Rinse 800 Gallons Spray Pressure 4-10 PSI Exit Vestibule: 6 Ft Nordson powder coating or Wagner Powder coating or Gema powder coat systems $60.000.00 Already removed from production, control box is already capable of controling 5 stages, we can build an additional 2 stages for you if requested at an additional cost. This washer is in the Syntec Systems Corp. Equipment facilities located in Saukville ... moreWisconsin. Visit collinsfinishing.com to get more details about our services we offer our loading sevices for this washer, we will load it on your truck. we can build new washers or modify existing check out Syntec Systems Corp. used and new at please also visit or our ebay store. We sell new Wagner powder and Liquid. Col Met, Sonic Air, Rapid Mono rail you name it we are the dealer. We sell filters and Supplies used and new equipment. Just ask we can help save you money.
|
|
|
BINKS Model 85 SPRAY GUN. Working condition.I checked mechanical function.Good work.
|
|
|
We have a plastic container full of sample packets of various types(finishes) of powdered bronze. Some of the packets were from Ohio Bronze powder Company of Cleveland. OH, A. Wilhelm Co of Reading. PA and Premier Bronze powder Co Cleveland, OH. None of these companies still exist. They would have to be pre 1963 because they do not have ZIP codes. There is also loose powder at the bottom of the plastic container. The weight is 2 pounds plus. Shipping weight is a little over 3 pounds. No reserve
|
|
|