|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Carol Stream, United States
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. High-Solids formulation for twice the coverage of conventional spray paints.
Buy It Now
Free Shipping
Condition: New Location: , United States
Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Kraft Tool Cf165pf Sidewalk Edger,Ss/Proform,1/2 In Radius.
Buy It Now
$16.99 Shipping
Condition: New Location: , United States
CERAKOTE® Performance Coatings - Series, Cure, Size
Buy It Now
Free Shipping
Condition: New Location: Carol Stream, United States
A top quality spray paint that is economically priced. Hides well, dries fast, and resists chipping and peeling. A durable coating that protects against rust and will not crack or peel. Dries to touch in 5 minutes, 30 minutes to recoat.
Buy It Now
Free Shipping
Condition: New Location: Cumming, United States
No tears, no texture, no stains. To apply Gloss HyperDip® over previously applied Shadow Black: wash the surface with soap and water, allow the surface to dry for 24 hours, wipe the surface thoroughly with PreDip Spray, then wipe the surface thoroughly with isopropyl alcohol.
0 bids Free Shipping
Condition: New Location: Homer, United States
Buy It Now
Free Shipping
Condition: New Location: Des Plaines, United States
The best solution for liquid application to older and dry coating systems. Improved agility ensures easy handling and brilliant results. ANI Mini Blow Gun Pen with Ani-Scratch Rubber Nozzle. ANI Spray Paint Gun Air Pressure Regulator Gauge Tools.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
Fits: New Contractor & New FTX Guns. One Graco Gun Repair Kit = Part #288-488.
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
High 80 gloss, looks wet when cured. Ultra Durable, TGIC polyester formulation, so it's great for interior or exterior use. 100% virgin powder and made in the USA! 1lb VIPER RED High Gloss Powder Coating.
Buy It Now
Free Shipping
Condition: New Location: Clifton, United States
Staining wood 1 or 2 ML per 4 ounces of acetone or lacquer, or linseed oil, or clear varnish carrier must be oil base Dyes are very strong.
0 bids Free Shipping
Condition: New Location: Broomall, United States
ProGrade Supplies Chip Brushes 12 Pk- 2inch Chip Paint Brushes for Paint, Stains,Varnishes,Glues,Gesso The all-natural china bristles on these chip brushes make them ideal for painting, staining, applying adhesives, cleaning, barbecue,arts,crafts or touch-up work. These versatile brushes are constructed with sturdy hardwood handles for durability and grip. This super-affordable set of chip brushes is a great value for the hobbyist or professional. *Value Pack Contains: 12- 2" Wide Brushes with White Bristles that are 1-1/2" long. All Square trim. *Great throwaway brush for many projects around the home, business or for industrial use. *Great utility brushes for use with most paints, Stains, varnish, acrylic and gesso.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 287031. Graco Contractor FTx Gun. Graco Contractor II Gun. Graco Gun Repair Kit. Your Authorized Graco / Titan Distributor an d Repair C enter. We are an AUTHORIZED Wagner/SprayTech/Titan/Speeflo/ASM Distributor and stand behind our product.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 224399. Your Authorized Graco / Titan Distributor an d Repair C enter. Graco 45° Adapter. This 45° adapter will bridge the angle for your spray gun and extension. You can use this for pressure rolling with you extension.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 16E844. Graco Inlet Valve. Your Authorized Graco / Titan Distributor an d Repair C enter. This part replaces the inlet valve in the machines below We are an AUTHORIZED Wagner/SprayTech/Titan/Speeflo/ASM Distributor and stand behind our product.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
Benefits of our premium silicone products include 50 -. 234" ID X. 360" OD X 1.00" Long. Will not crack, shrink, harden or break.
Buy It Now
Free Shipping
Condition: New Location: Warren, United States
Another standard use of 10 mil plastic sheeting is as a vapor barrier, either in a crawl space or in a concrete slab. It is especially popular in hotter climates where low-water solutions are preferred.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number: 288818 (old part number 243090). This will work in the XR5, XR7, XR9, SR7, 170 Tradesman, ProX7, ProX9, ProLTS17, and ProLTS19. Graco Magnum Pump Repair Kit. We are an AUTHORIZED Wagner/SprayTech/Titan/Speeflo/ASM Distributor and stand behind our product.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
Benefits of our premium silicone products include 50 -. 080" ID X. 205" OD X. 750" Long. Will not crack, shrink, harden or break.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
Benefits of our premium silicone products include 25-. 970" ID X 1.095" OD X 1.50" Long. Will not crack, shrink, harden or break.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
GENUINE Titan On/Off Switch #9850936. See owner's manual for application.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 287022. In BLUE RAC X and ORANGE RAC 5 HandTite Guards. 30" extension with BLUE RAC X Guard . Includes RAC X HandTite Guard. AUTHORIZED GRACO DISTRIBUTOR. Just attach pole to your airless gun.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
You will receive the plugs listed below Benefits of our premium silicone products include (50). 343" Bottom X. 437" Top X. 687" Long. Will not crack, shrink, harden or break.
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
100% virgin powder and made in the USA! Cure Schedule: 10 mins @ 400 degrees. High-temp tapes, silicone plugs, powders- we are adding more regularly!
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
Ultra Durable formulation, great for interior or exterior use. 1lb Chevy Orange Powder Coating. Cure Schedule: 10mins @ 400 degrees. High-temp tapes, silicone plugs, powders- we are adding more regularly!
Buy It Now
Free Shipping
Condition: New Location: Freehold, United States
Plasti Dip Aerosol Spray - Black. Plasti Dip. ® is used widely for automotive detailing; coating wheels; and painting graphics that can be peeled off without affecting the car's OEM finish . What Plasti Dip.
Buy It Now
Free Shipping
Condition: New Location: Warren, United States
Gold Additive. Though the pictures don't capture the effect the sparkle has in a blend. It is reminiscent of a mica countertop. It almost resembles an aluminum color and gives a great elegant look.
Buy It Now
Free Shipping
Condition: New Location: Duncan, United States
Master Elite Series 25 foot air and fluid hose assembly set with fittings. A premium heavy duty hose assembly for use with pressure feed spray guns, paint pressure pot tanks, and for use in any industry, from automotive, industrial to woodworking.
Buy It Now
Free Shipping
Condition: New – Open box Location: Little Rock, United States
Cans may show very minor dents or blemishes from warehousing and transport. Includes Part A only - Part B is not included. NEW - Never Opened!
Buy It Now
Free Shipping
Condition: New Location: Milaca, United States
Wagner 0414353 or 2359314 Nozzle Gasket Seal (one). Genuine OEM part. one piece. eturn Policy.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
Built to take the heat, they can withstand temperatures as hot as 600°F. This premium silicone is flexible enough to conform to rough surfaces and works in both threaded and non-threaded holes. The tapered stopper design allows these plugs to fit many hole sizes and depths.
Buy It Now
$6.95 Shipping
Condition: New Location: Santa Cruz, United States
This 700cc cup fits all Iwata LS400, WS400, Entech, and Hybrid spray guns. Comes with a lid. Part number 6032d. It also fits the lph300, but is kind of a big cup for that gun. A larger 1000cc (1 Liter) and a smaller 400cc cup are also available from us
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
1lb LIGHT GRAY RAL 7035 Ultra Durable Powder Coating. 40-50 gloss level, super clean light gray powder. TGIC polyester ULTRA DURABLE formulation approved for outdoor use. Like all our powders, it is 100% virgin.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number RAX417. This high quality Graco part will work with most Graco spray guns, and replace your current guard. You cannot use a blue tip with a different guard. Graco RAC X Guard and Tip Combo.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
You will receive the plugs listed below Benefits of our premium silicone products include (250). 250" Bottom X. 375" Top X. 750" Long. Will not crack, shrink, harden or break.
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
60 gloss level, puts it between Satin Black and Mirror Gloss Black. TGIC polyester ULTRA DURABLE formulation, so it's great for exterior use. Like all our powders, it is 100% virgin. 1lb CHASSIS BLACK Ultra Durable Powder Coating.
Buy It Now
$9.95 Shipping
Condition: New Location: Nappanee, United States
Powder Type: Polyester. GLOSS: 30-40%.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Graco Paint Sprayer Drain Valve - 245103. 7900 GMax Lo-Boy Male inlet Valve 232633 A, B. Your Authorized Graco/ASM Distributor. We are an AUTHORIZED Wagner/SprayTech/Titan/Speeflo/ASM Distributor and stand behind our product.
Buy It Now
$14.99 Shipping
Condition: New Location: White City, United States
This color is a polyurethane top coat powder coat and has a high gloss finish. Top Coat Information: Top coats are transparent.The color and brightness of the substrate (surface) under a top coat will affect the finished appearance.
Buy It Now
Free Shipping
Condition: New Location: Milaca, United States
Piston Pump Throat Seal Lube Liquid or TSL. Price is for one bottle.
Buy It Now
Free Shipping
Condition: New Location: Milaca, United States
Wagner 2307279 Air Filter. This product can expose you to chemicals which are known to the State of California to cause cancer. Genuine OEM. eturn Policy.
0 bids $9.95 Shipping
Condition: New Location: Nappanee, United States
Powder Type: Polyester. GLOSS: 80%.
0 bids $9.00 Shipping
Condition: New Location: Lynchburg, United States
This powder is transparent so the exact shade can vary based on how thickly the powder is applied. A very beautiful, high gloss powder. 100% virgin powder. Cure Schedule: 10 mins @ 400 degrees. High-temp tapes, silicone plugs, powders, etc.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 243298. In BLUE RAC X and ORANGE RAC 5 HandTite Guards. 30" extension with ORANGE RAC 5 Guard . Includes RAC 5 HandTite Guard. AUTHORIZED GRACO DISTRIBUTOR. Just attach pole to your airless gun.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
Part Number 189920. Graco Pump Inlet Strainer. Your Authorized Graco / Titan Distributor an d Repair C enter. This part replaces the pump inlet strainer in the machines below lower 48 states ONLY .
Buy It Now
Free Shipping
Condition: New Location: Milaca, United States
Replaces Titan 560-038 or Wagner 0296289 Seal for Gun Handle Outlet Filter. Refer to your manual or Titan/Wagner website for detailed information. This product can expose you to chemicals which are known to the State of California to cause cancer.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Buy It Now
Free Shipping
Condition: New Location: Egg Harbor Township, United States
Automotive 248657.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Maxpure Te2s6l2.5-Pd Stainless Steel Fitting.
Buy It Now
Free Shipping
Condition: New Location: North Clarendon, United States
Built to take the heat, they can withstand temperatures as hot as 600°F. This premium silicone rubber is flexible enough to conform to rough surfaces and works in both threaded and non-threaded holes.
Buy It Now
$4.99 Shipping
Condition: New Location: Belgium, United States
Our restoration quality can be read about in Motorcycle Classics Magazine. The CB550 and S65 were featured. Honda Cloud Silver Powder. Custom mixed for Retrospeed. Use what the Pro's use. Withstands engine heat.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model TRMM 620C. Full Factory Warranty.
Buy It Now
Free Shipping
Condition: New Location: Rockwall, United States
Clear, lightweight, super tape adhesion. for use as a overspray shield, paint drape, or multi-purpose cover.
Buy It Now
Free Shipping
Condition: New Location: Freehold, United States
® is a synthetic rubber based coating that's perfect for a wide range of projects and applications. Plasti Dip can be used as a coating for automotive detailing; coating wheels; and painting graphics that can be peeled off without affecting the car's OEM finish .
Buy It Now
Free Shipping
Condition: New Location: New Bloomfield, United States
• Amount: 1lb. • Item: Alesta Powder Coating. You will receive a POWDER PAINT. NOT LIQUID PAINT. ABOUT WAREHOUSE POWDER COAT. • Color: Max Gray.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
This Armour Supplies & Parts pressure lower ball cage is compatible with Titan 704-703 inlet cage. Titan® and 440i ® are trademarks of Titan Tool Inc. which does not sponsor, authorize or endorse this product.
Buy It Now
Free Shipping
Condition: New Location: West Chester, United States
You get exactly what you see in the phot, filter combo set. We are an AUTHORIZED Wagner/SprayTech/Titan/Speeflo/ASM Distributor and stand behind our product. No exceptions. lower 48 states ONLY .
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Paint and Varnish Remover. and Enclosures. & Recepticles. Electrical Outlets. Light Industrial. Electrical Boxes. General Purpose. & Industrial.
Buy It Now
Free Shipping
Condition: New Location: Хмельницький, UA
Minimum order quantity is 2lb 3oz/1kg. It has very good UV and yellowing resistance. Gloss Level up to 95 % gloss 60°, colour dependent (for GL and HR). Colour A wide range of colour. PROTECTIVE TOP CLEAR COAT NOT REQUIRED.
Buy It Now
Free Shipping
Condition: New Location: , China
3.100% interchangeable for the original. no middleman, save money.
|
|
|
574-825-4990 SKU: 49862 Evirocron Part 023 Powder Coat Clear Polyester 7.6 Lbs Of Material Lot No 48548. Brand: Evirocron Condition: Used Model: PCT10107 Part No 023 Country of Manufacture: United States Consigner: C Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 10 CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. ... morePaypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combined shipping. If you are not satis
|
|
|
ALL 6 ARE IN EXCELLENT CONDITION. PLEASE VIEW ALL PHOTOS AND ASK ALL QUESTIONS YOU MIGHT HAVE PRIOR TO BUYING. WE STRIVE TO FIND THE HIGHEST QUALITY MERCHANDISE TO SELL FOR THE BEST POSSIBLE PRICE! PLEASE VISIT OFTEN SINCE WE ARE CONSTANTLY ADDING NEW ITEMS EVERY DAY. THANK YOU AND GOOD LUCK!
|
|
574-825-4990 SKU: 49861 Envirocron 023 Powder Coat Clear Polyester 34 Lbs Of Material Lot No 49706. Brand: Envirocron Condition: Used Model: PCT10107 Part No 023 Country of Manufacture: United States Consigner: C Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 38 CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. ... morePaypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combined shipping. If you are not satisfied
|
|
574-825-4990 SKU: 49860 Envirocron 287 Powder Coat MS-19 Silver Polyester 49Lbs Of Material Lot No 62680. Brand: Envirocron Condition: Used Model: PCT73106 Country of Manufacture: United States Consigner: C Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 53 CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. ... moreCredit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combined shipping. If you are not satisfied with
|
|
574-825-4990 SKU: 49838 PPG Part# 014 Powder Coat Smokey Beige 40Lbs Of Material Lot No 51372 Envirocron. Brand: PPG Powder Coatings Condition: Used Model: Cont# 519 Part# 014 Country of Manufacture: Mexico Consigner: C Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 44 Also called Black PCT Powder. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any ... moreway please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combin
|
|
574-825-4990 SKU: 49833 Envirocron PCMP20103 Powder Coat Hussman Adobe Epoxy Lot no 10C5185 22 lbs. Brand: Envirocron Powder Coatings Condition: Used Model: PCMP20103 Country of Manufacture: United States Consigner: C Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 26 CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. ... morePaypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combined shipping. If you are not sati
|
|
Graco 10 Gallon Stainless Steel High Pressure Paint Pump Agitator 236153 THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. PLEASE MAKE SURE TO MESSAGE US BEFORE PURCHASE TO SEE IF THE ONE YOU WANT IS STILL AVAILABLE. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: Model# 236153 APPROXIMATE PRODUCT DIMENSIONS: WIDTH: 22" LENGTH: 24" HEIGHT: 34" SHIPPING WEIGHT: 150 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. ... moreSHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CA
|
|
KORYO COATING TUC KCI-201 POWDER COATING PULSE CONTROLLER UNIT TUC KCI-201 POWDER COATING PULSE CONTROLLER UNIT COMES AS SEEN IN PHOTOS MODEL KCI-201. INPUT VOLTAGE 220 VAC. INPUT FREQ 50/60Hz. INPUT POWER 35W OVERALL SIZE 19"x12"x4" TALL. WEIGHT 22 LBS. Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 25 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items ... morebetween 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport
|
|
|
Nordson#5100 12x Cartridge Powder Coating Paint reclamation collection Modules. Number of Cartridges: 12x AZO Inc. Model# E-240-B1 Product Sieves included with each module Modules on castors for easy and fast color changes S/N’s: 16042.24 OR 9539.5 SELLING AS IS WHERE IS BUYER IS RESPONSIBLE FOR ALL SHIPPING AND RIGGING COSTS
|
|
Barely used as you can see from the pictures. Comes with the manual gun system. No returns accepted, no international. What you see in the picture is what you get. Sold as is, works fully, the powder container not included. Vantage® Manual Powder Coating Gun System The Vantage® manual powder spray system provides exceptional value and production-proven performance in an easy-to-use. Rugged and reliable manual powder coating system. Exceptional value and production-proven performance in an easy-to-use. Rugged and reliable manual powder coating system. Vantage® manual powder coating system offers convenience and flexibility for a wide range of powder coating production lines. The Vantage manual spray gun is lightweight. Compact, yet exceptionally rugged and reliable. Provides ... moreoptimum operator comfort and control Delivers superior performance in tough conditions typically found in powder coating production lines The Vantage control unit combines performance features and technology with an easy-to-use operator interface for optimum coating performance over a broad range of application challenges. Bright. Easy-to-read digital display Simple. Touch-key adjustment with LED indicators kV and AFC(micro-amp) control and monitoring Specifications Manual Gun: Height: 20.95 cm(8.25 in. Length: 29.21 cm(11.50 in. Width: 3.8 cm(1.5 in. Weight: 650 g(22.80 oz. Cable Lengths 6 meters(20 ft. gun cable 4 meters(13 ft. cable extension Control Unit: Height: 134 mm(5.3 in. Width: 330 mm(13 in. Depth: 254 mm(10 in. Input Voltage 85-250 VAC. 1 Phase, 50-60 Hz, 1 Amp Output Voltage 6-21 VDC Input Air Pressure: Minimum 4 bar(60 psi) Maximum 7 bar(100 psi) Typical Air Consumption Pump and fluidizing assist 99.1 l/min(3.5 cfm) Air Filtration Air must be clean and dry
|
|
|
This is for a used Fox Valley Systems. Inc. Super Striper Machine. This was used a couple of times by my Brother-In-Law to stripe his parking lot at his clinic. It appears that everything is here but this is all I received.
|
|
|
Kotemaster usa Powder Coating Containment Booth. 8 X8 X 16. Kool Koat Powder Gun 3.0 DPW. Columbia Coatings 8 X 8 X 18 EXPANDABLE Oven 700.000 BTU burner. Currently running on propane. Have new 1000 gallon tank available. Has less than 12 hours on all equipment. Over $40.000 invested with upgrades. MUST SELL! $15.500(need garage space back, also included approximately $3,500 in powder, colors: shiny black, flat black, wrinkle black, white, red, silver, primer. Buyer must disassemble. Remove, and I will provide tools and equipment to load on your trailer.
|
|
|
Nordson Powder Coating Hopper HRS-1- No Reserve Below is the website that shows information about hopper: http:emanuals.nordson.com/finishing/files/Powder/108530B.pdf Free Local Pick up or Buyer pays for Shipping. We will box up item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
VINTAGE Rapid Automatic Restaurant-Style Cork Puller Bottle Opener Swiss Made Product Description: Used but in very good shape and works great. Sold As Pictured TK07172014JJS1003429 19-2 Shipping and Handling is Calculated Using the eBay Calculator(below) Please note: All items are inspected thoroughly before listing and shipping to be verified that they are as described here. All outgoing packages are inspected thoroughly before shipping to assure that they are packed according to USPS and UPS shipping guidelines. Pictures may be representative of the item and not the"actual" item offered for sale; such is especially the case with"stock" photos. Box art. Manufacturer design and such may vary. All items are sold"as is. We are not experts and product specs may be unintentionally ... moreinaccurate, buyer should research with manufacturer before bidding- no returns for errors of this nature. If you bid, you are entering into a legally binding contract and you agree to our terms. Thank you, and happy bidding! Please read our terms& conditions(link below our logo- above left) prior to bidding. On May-19-13 at 06:35:38 PDT. Seller added the following information:
|
|
|
Caution Orange spray can. Plasti-kote. Paypal accepted. No reserve. Ground shipping
|
|
Description Terodyn System 2000 RPA-2 Module Adapter& Nozzle Payment Payment must be made within 3 days of purchase. Shipping Shipping will be by FEDEX Ground. USPS Priority, or Freight Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement ... moreequipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Removed from an MP777. 17mm Hex. Very little signs of use. Tires glued and feels like inserts are all there. Please study pictures so that you have an understanding of how good these are. I invite questions. Due to the nature of this hobby there can be absolutely no returns so be sure to ask me for any details you might need to help you make up your mind. Sold"AS-IS" with no warranty implied or given.
|
|
|
PLEASE NOTE: Our website CMSURPLUS carries products of all kinds and nature mostly aftermarket automotive. Tools, industrial and household items. We always describe the items to the best of ability. If you have any questions contact us, Google. used. has paint on the handle. used. any questions let us know. has gun and hose.
|
|
|
Please read description* Nordson Sure Coat box unit. Works great. All items included are listed below: Gun control unit-Sure coat manual gun with gun cable-Vibratory stand with pick up tube mount-pick up tube with Nordson 100 plus pump(missing tube connector on pick up tube and automizing connector) Note- please see pictures for the two missing items. Extra parts as seen in picture: Fluidizing membrane for pick up tube(new) Gun cable(new) 2 pound hopper with membrane( home-made but works great) 15 ft. Of gum rubber powder hose 2 fan spray tips( one new with x shape pattern) 1 hose connector(new) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1477f3fe2be-0x11a-
|
|
GEMA PCG1 CONTROL + GUN SPRAYER TYPE PG1 POWDER COATING MANUAL Click Images to Enlarge GEMA PCG1 CONTROL + GUN SPRAYER TYPE PG1 POWDER COATING INPUT: 100-240 VAC 60 VA OUTPUT: 10 V 145 PSI MEASURES: 29" x 19" x 43" WEIGHT 106 lbs COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a ... morestd 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected
|
|
|
I BOUGHT THIS YEARS AGO FOR A PURPOSE OTHER THAN WHAT IT WAS INTENDED. I WAS LOOKING FOR THE PERFECT WAY TO COOK PRIME RIB WITHOUT WEIGHT LOSS, IT IS MEANT TO BE USED FOR DRYING PAINT,EPOXY AND POWDER COAT PROJECTS, IT HAS A RACK IN TO TOP, IT HAS 8 125V INFRARED LAMPS. THERE IS NO THERMOSTAT CONTROL JUST AN OFF/ON SWITCH. I WAS ABLE TO COOK A 15 POUND STANDING RIB ROAST TO A PERFECT 120 DEGREE INTERNAL TEMP IN 6 HOURS WITH IT, MEASURES APPROX INSIDE 22" X 22" X 17" THE OUTSIDE MEASUREMENTS ARE APPROX. 33" X 28" X 25" WEIGH'S APPROX. 60 POUNDS dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14785daf3db-0x110-
|
|
|
42 X24 X 24 NORDSON FLEXICOAT POWDER COAT SYSTEM LOAD. WILL LOAD ON FLAT BED TRUCK AT NO CHARGE, NO RETURNS,MISSING SPRAY GUN& EAGLE TIMER WEIGHT 900 LBS FOR SHIPPING QUOTES AND CREDIT CARDS CALL TINA AT 727-362-8318 I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616 OR WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! On May-23-14 at 09:09:35 PDT. Seller added the following information:
|
|
|
so i've been decided on selling my nitro faze cup system.its a great system(CHECK REVIEWS) and has NO problems with it.just trying to move up into a gema or wagner at the moment. this system comes with everything in picture including all the nozzles.everything works perfect. if you have any questions please feel free to ask. Attached are some photos of some work done by my system. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1478b41486e-0x114-
|
|
PRECISION QUINCY GAS-FIRED BATCH OVEN Max temp of 550 degrees. Inner dimensions are 48 wide X 48 tall X 32 deep. Has 2 removable shelves. This oven was originally set up for 460V 3-phase; it was converted to single phase for our shop. Comes with the original 3-phase motor as well as brand new single phase motor. You can either keep it single phase or convert back to 3-phase in order to operate. As it sits. The unit will power up but will not run through a cycle. Precision Quincy can supply a technician to work on this oven at your cost. We have decided we do not have the time to work on this or the floor space to keep it, so we are offering it up for auction at NO RESERVE! This oven needs work. But it is not like the cheap ovens being offered on ebay. We purchased the oven USED at a cost of ... more$5000. This would be a very nice piece once the bugs are worked out. Oven is sold AS-IS and we cannot provide any technical support. We have a forklift and can load for you. Weight is approx. 1100lbs. This is very HEAVY-DUTY! Any shipping arrangements are to be made by the buyer. Please contact us with any questions prior to making a bid. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1478ea963b0-0x113-
|
|
|
Complete Powder Coating System. 110v/60Hz, 100kv Adjustable voltage. This system is 3 months old. We used it very little, it's in new condition, All the original parts supplied from the manufacturer.
|
|
|
Kremlin Rexson Flowmax 16-120FT pump. Good used take off. Comes with all shown in pictures. No guns or hoses.
|
|
|
Eastwood HotCoat PRO 1100 Powder Coating System Kit Retails $495.00+ Part# 58100 Used like new! See Pics! Husband got it as a present. But had one similar already! I ship one or same business day. Thank you for looking and have a great day!
|
|
|
Devilbiss EGHV Paint Sprayer. Not sure of condition im not a painter, but I believe it works fine, if not I give refunds
|
|
You are bidding on a Unique Eastwood Compsny HotCoat Powder Coating System Deluxe Kit in Excellent Used Condition INCLUDED: 3 Powder paints(partially used) Original kit comes with 1can. Spraying apparatus and power box is clean and shows no sign of usage. However item has not been tested, but looks almost flawless. Original Box is worn but very functional. Detailed Instructions. Registration information, color paint chart. 3 unused empty bottles Tape Extra washers. Tips, etc. Air Moisture Filter Stainless steel wire not included. This item will be shipped free with Buy-it-Now purchase. Payment for auction wins are due within 48 hours after auction ending. And due immediately with Buy it Now win. Unpaid buyers case will be opened for these cases and an unpaid buyers strike against the buyer ... morecould affect buyers record. There are no returns and no refunds. Pictures are of the actual item. Thanks for looking at my auction. And check out my other items for sale with varieties from new and pre-owned auto parts. Electronics, collectables, antiques, clothes, toys, and lots of everyday items, old costume jewelry, unique items and even some 1-of-a-kind treasures, just to name a few. All my items will be sold to the highest bidder. Most with no reserve, and low starting bids. Some items will ship free with buy it now purchases. Sales from items sold will be used for kids school supplies. Our first family home, and a percentage will go to help homeless people in Hawaii. Bid knowing your win will help a single mom of 11 get a home, and other homeless families in Hawaii getting help. Much Aloha. God Bless, and Happy Bidding.
|
|
Ace Pawn Shop Auctions You are bidding on a AUTOMATION QUANIX 7500 COATING THICKNESS GAUGE IN PLASTIC CASE~NICE NOTE: Your Paypal account must be linked to a U.S bank account/Credit card. Foreign Paypal payments will be refused. This little guy is in great shape and powers on great! I do no know much about this device but I have taken quite a few pictures for you to see what you are actually bidding on. It will come with the pictured paperwork all in original hard plastic case in good shape. Good luck and happy bidding! This is a great deal as we we start our auction at 99 cents. NO RESERVE! Bid now before it is too late! What you see on the pictures below is what you will get. If not pictured. Then it is not included. Thank you! NOTE: Should you notice any mistakes in this listing please ... morelet me know before you place a bid. It is of bidder's responsibility to read the whole auction and study the pictures carefully prior to bidding. DON'T LET THIS DEAL SLIP AWAY BID TODAY! 99 CENTS ONLY STARTING BID NO RESERVE! Please study pictures. They are of actual item you will receive. International bidders please read the terms and conditions listed below. Not what you're looking for? Check out our other auctions! Ace Pawn does not end auctions early. Emails requesting such will receive no reply. Payment Terms Bidders in the United States: Winning bidder will pay with Paypal ONLY. NO other methods payment will be accepted from now on. Unless item is picked-up at our store. WE ONLY SHIP TO PAYPAL CONFIRMED ADDRESSES SO MAKE SURE YOUR POSTAL ADDRESS IS PAYPAL CONFIRMED AND UP TO DATE PRIOR TO BIDDING! We only accept Paypal payments from U.S. Paypal accounts. NON-U.S. Paypal payments will be blocked and refused. We ship within the 48 U.S Lower States using FedEX Ground. Which includes insurance. NO SHIPPING TO ANYWHERE OUTSIDE THE C ONTINENTAL U.S. Tax Info: Indiana shipments must pay 7% sales tax on final bid. International bidders: NO INTERNATIONAL SHIPPING AVAILABLE. SORRY! Ace Pawn Shop is not responsible for c
|
|
Tool only! This impact is used(refer to pics) and is UNTESTED. Tool is dirty. Has scratches and shows signs of great use. I do not have the battery to test unit. Label has been scratched by Retailer. Ships to US ONLY(lower 48 states) Work Faster and Better with the 12-volt Compact 1/4' Impact Driver from Craftsman The Craftsman Nextec 1/4' Impact Driver delivers 810"lbs. of torque in both directions- forward and reverse. This power can help you easily screw down boards. Planks and decking timber also applying different types of bolts and fasteners is made easy. A high torque combined with the 0-300 BPM and 0-2200 RPM makes this tool versatile and allows it to be used for a wide range of applications including heavy-duty applications. You can use it as a drill to bore holes with ... morethe help of a bit or to install windows. Ease of operation is the main advantage of the 12-volt Compact 1/4' Impact Driver. With a soft grip handle. The design is compact and ergonomic. Despite the powerful torque the impact driver doesn't cause weight-related user fatigue. Its variable speed trigger allows you to adjust the speed according to the material you are working with. Get precise performance and save time with this easy to use tool. The Craftsman Nextec 1/4' Impact Driver is a versatile tool that can be used for auto work. Woodwork and metal work Cordless driver with its compact ergonomic design and soft-grip handle offers excellent maneuverability in confined spaces Charge time of 30 minutes increase your work efficiency and you can get more done easily 810 lbs. of forward/reverse torque allows for one-handed easy driving Variable speed combined with the electric brake makes this an easy tool to work with LED work light illuminates any work surface with ease. It's available in gray Chuck Size: 1/4 in.
|
|
|
This Auction is for a Nordson Sure Coat Power Cord. The Power Cord is used but in very good condition. Shipping will be thru UPS at cost of $8.00 paid by the buyer.
|
|
|
Picked these up at a local auction. Ended up not having any need for them. Appear to be very clean and were in use. Wagner is heavy duty, made in Switzerland. Not your Chinese stuff.
|
|
For sale is a large gas industrial oven. It measures externally 14'10" long 7'8" wide 8'4" tall. Internal working dimensions: 5' wide x 6' tall x 14' long. It was purchased from an operating powder coating company in MA. It was not in use at the time of purchase but was set up at an old location where it was fully operational. All components appear to be intact. And I've had an oven building company quote between $1000-1500 to set up the oven. The oven is sitting unused and partially disassembled but all major components are included. The frame sits untouched. The 2 huge circulation fans. 1 exhaust fan, control box, gas train and regulators, exhaust ducting have been taken off oven shell but everything is included. The floor consists of 2 tracks(for ... moreroll-in racks) and 6 insulated panels which are included. The floor can be used, or the oven can be sat right on the concrete floor and used. I purchased this oven with the expectation of utilizing it at a new facility. But decided that I wished to head in another direction so rather than leave it sitting around for eventual use it is now up for sale. I believe that the oven was originally used for heat treating or some other very high temperature application. It was built in the late 70's and is very well built. It has double doors the front and back. The oven currently sits on a large trailer in North Branford. And can be easily moved, or unloaded and loaded onto your trailer/ rigger's trailer. There is a possibility of local delivery which will be negotiated on an individual basis. The oven is sitting on a custom made cradle comprised of welded steel I-beams, and is sold with the cradle to facilitate moving. I have it listed at FAR less than its value and my purchase price for quick sale. I will consider bartering for professional sandblast equipment/ cartridge dust collectors/ 5-40 HP screw compressor/ etc. Although this oven appears to be in fully functional condition and was completely intact and assembled when
|
|
|
I have 9 North-face masks 6 are complete. 3 could be used for spare parts they go for around 175-200 New. All are in good shape as far as I can tell, im not a expert on them though. can send more pics
|
|
|
I have a Spectracoat ES-03 Powder Coating system for sale. I paid $1479 for this 8 months ago and upgraded. In addition to the system. This comes with the multicoat nozzle. This has a 2lb. hopper. Faraday wave board to help with the tight spots. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147e875acb8-0x10b-
|
|
|
Sata 4000 b paint gun works great. Cup is dented up but works fine still. Has pps adapter never used. Gun has a B scribed in it as seen in pic. Used only for basecoat. Has 1.7 tip free shipping no reserve
|
|
|
Wagner Manual Powder Coating System Includes: Wagner EPG Sprint Manual Powder Coating Controller. Wagner PEM-C4 ERGO Manual Powder Gun. Unit has been tested and is in full working order. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 Option#5 for more information.
|
|
|
ITW Gema Easy Tronic Manual Powder Coating System w/ Box Feeder Includes: ITW Gema Easy Tronic Manual Powder Coating Controller. ITW Gema Easy Select Manual Powder Gun. ITW Gema Box Feeder Stand. Unit has been tested and is in full working order. Shipping available- Quotes available upon request. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 Option#5 for more information.
|
|
|
ITW Gema PG Manual Powder Coating System w/ 80lb Hopper Includes: ITW Gema PGC1 Manual Powder Coating Controller. ITW Gema PG1 Manual Powder Gun. ITW Gema 80lb Hopper w/ Stand. Unit has been tested and is in full working order. Shipping available- Quotes available upon request. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 Option#5 for more information.
|
|
|
Nordson Versa Sprayer 246152H with Spray Gun NPE-2M- No Reserve Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
POWDER COATING SERVICES WE HAVE EXPERIENCE WITH MOTORCYCLE. GUNS HAND HOUSE HOLD ITEMS. WHY SETTLE FOR HAVING THE SAME PARTS AS EVERYONE ELSE, WHY NOT PUT YOUR OWN PERSONAL TOUCH ON IT WITH OUR UNIQUE COLORS. WE HAVE EXPERIENCE WITH; BASE COATS, WRINKLE FINISH, TRANSLUCENT COLORS, METAL FLAKE, AND CLEAR COATS. WHY SPEND HUNDREDS OF DOLLARS REPAINTING THE SAME ITEM OVER AND OVER JUST TO HAVE THE PAINT RUB OFF AGAIN. POWDER COATING IS DURABLE AND IS BAKED ON TO LAST. WE ONLY USE THE TOP OF THE LINE POWDERS AND OUR SUPPLIER HAS A HUGE VERIETY OF COLORS TO CHOOSE FROM. MESSAGE US FOR MORE DETAIL AND SPECIAL PRICING.
|
|
VERY NICE! Quality Powder Coating Equipment! It is our pleasure to present you with an opportunity to bid on or Buy It Now. An excellent in quality. Used Nordson Surecoat powder coating handgun unit with a control drawer. Cable, and 50-pound powder hopper. All parts and equipment have been personally inspected. Cleaned, and repaired by TWS Industries. Inc. The hopper is clean. Slightly used, and is being provided with a newly refurbished ITW Gema powder pump! TWS Industries has over 30 years experience in the powder coating equipment. Distribution, maintenance and sales industry! Check out our other equipment on this site and stay tuned for much more in the very near future as well! Also. Feel free to contact us at: Terry Stuber(Owner) c. 317) 709-5539; Nathan Summers(Div. Mgr. h. 317) 467-1479 ... moreor email; ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14814873a2a-0x107-
|
|
|
ITW Gema Optiflex B Manual Powder Coating System w/Box Feeder Includes: ITW Gema Optiflex B Manual Powder Coating Controller. ITW Gema Optiflex B Manual Powder Gun. ITW Gema Optiflex B Box Feeder Stand. All related spare parts we have will go with the unit at sale. Unit has been tested and is in full working order. Onsite testing can be scheduled. Freight Shipping available- Quotes available upon request. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14819a678d6-0xd7-
|
|
|
The materials in this outdoor furniture require no maintenance. Can be stacked. Which helps you save space. Easy to keep clean– just wipe with a damp cloth.
|
|
|
Nordson Smart Coat Powder Spray Controller Cabinet. P/N# 173823A. Includes 10 Gun Modules. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14820d791c0-0xf3-
|
|
|
Nordson Hopper NPE-H4- No Reserve 14"x6"x6" Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
I am selling a Gema easytronic powder coating system. The unit is 100% working. I have recently installed a brand new cascade and gun cable. The only reason I'm selling it is to upgrade to a newer gun. It has all parts except for fluidizing pads which I would recommend changing either way. Item comes as is. Happy buying everyone! 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1482ac6d8de-0x102-
|
|
|
Selling my custom made"walk in" type powder coating/paint drying oven. The outside dimensions are 7'3" high. 6'3" wide& 6' 10" deep, made of all insulated stainless steel panels, stainless steel floor& double doors. It has 6 heating elements requiring 220v single phase and 110 v for electronics. It has digital OMEGA electronics. I will not ship this item, and I would prefer and recommend interested individuals to ask questions or come and see the unit for yourself, thank you in advance, Mike
|
|
|
Nordson 200lb Fluidizing Hopper w/ Azo Sieve. Accumulator& 13 Powder Pumps 200lb+ HR-36 Nordson Hopper Azo Sieve- Model E-240-B1 w/ Accumulator. Includes: 13 Powder Pumps. Unit has been tested and is in full working order. Shipping available- Quotes available upon request. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 Option#5 for more information.
|
|
|
Stainless Steel Tank. Was used for powder coating. It stands 40" tall and 42" across. Comes out to 72 Gallons. It has a Salina Vortex Corp Valve on top Model# FHS10-X Also has a Oriental Motor Co LTD Waterproof Motor FPS1560A-90M 100V. For Shipping Quote Contact Me 2 Available
|
|
|
NORDSON POWDER COATING GUN CONTROL POWER SUPPLY POWER CORD* 8.5' LENGTH* AUTHENTIC NORDSON* 125V CURRENT SET UP* VOLTAGE UP TO 600 VAC* 15A CALIFORNIA RESIDENTS PAY SALES TAX NO FREE SHIPPING! BUYER IS TO UNDERSTAND OUR TERMS AND CONDITIONS PRIOR TO PURCHASE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-148494b3fdd-0x10c-
|
|
|
Very good condition. Guaranteed working condition.
|
|
This item is LIKE NEW! Bought brand new and only used one time to test for function! Works Great! SUPER ETCH-O-MATIC is a Powerful. 15-Volt, 10-Amp, Heavy Duty, Industrial Quality Marking System that can Stand Up to Continuous Duty, Production Line Marking. It can make Fast A.C. Marks, then Change Instantly to Deep Etch Marking Down to.003" Deep. It can make Large Marks 2" x 4" or Larger(with optional purchase of Medium or Large Grid Kits) for Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly. This is a Solid. No Frills" Etcher that is Priced $200 to $300 BELOW Similar Kits on the Market Today. KIT CONTAINS: 1- 15-volt. 10-amp. marker unit with external transformer; adapter clip for deep etch marking; ground plate, extra pad; 100 pak special stencils; and ... morepacked in sturdy plastic carrying case.
|
|
|
BGK Finishing Infared Oven. 5 Stages. 9 Zones. Automatic Part Detection System. 480 Volt. 3 Phase. FOB: Berlin. WI, Will load on truck. Call for more information 9203615208 x1 Nick
|
|
|
ITW RANSBURG AER4003-00. MANIFOLD BLOCK AS PICTURED. FREE SHIPPING. GARRANTEED ALL THREADS IN PERFECT SHAPE.
|
|
|
From a new kit. Used to remove a doorknob. Was overkill for that job. So switched to drill. Otherwise as new. Includes battery and charger. Consistently fast shipping from a reliable seller- check my feedback.
|
|
Used. Not complete or new. For parts. Still useable. Not sure how to quantify it. PLEASE CHECK THE SHIPPING CALCULATOR OR ASK ABOUT MORE SHIPPING OPTIONS! Buyer Information: Buyer pays shipping/handling. I ship at cost. Plus a 10 cent handling fee on all items and an additional 10% handling fee on large items shipped Internationally. USPS Priority Mail or Parcel Post preferred, but Local Pick-up, First Class, Media Mail, and UPS eligible(please note: UPS shipping may take an additional few days, as I do not make regular trips and my nearest UPS shipper is a 40 minute drive) Please ask about more/cheaper shipping options! Winning bidder must indicate method of payment within 72 hours of auction’s end. PayPal payments must be received within 72 hours. International will ship USPS Priority Mail ... moreInternational, First Class International, or UPS to be calculated at close of auction. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. The USPS does not provide tracking on certain packages going to certain countries. Your item will be tracked in the United States, but may not be scanned internationally. Foreign deliver services are sometimes not reliable. Once the item has left my possession and is scanned by the carrier, I cannot be responsible for its delivery. Please consider the involved risks before bidding. Buy-It-Now: I do not end auctions early. Auctions were the original intent of eBay. And are still more fun. Good luck bidding! Combined Shipping: I combine shipping where ever safely possible. And at my discretion. Saving you money, saves me money. Feedback: I gladly leave feedback for all satisf
|
|
Pre-owned. GREAT condition Craftsman Punch Set- 10 Piece Assortment Includes: 1/4- 42886 WF Two 3/16- 42902 WF. 42885 WF 5/32- 42901 WF Two 3/8- 42841 WF. 42861 WF Two 1/8- Both 42883 WF Two 3/32- Both 42882 WF ALL but the larger TWO of these have INITIALS CARVED ON THEM: J E H These are NOT new. These are a pre-owned, used set, in GREAT condition, initials on most of them, All ready to use! What you see in the PICTURES is EXACTLY what you will get! Feel free to E mail me if you have ANY questions. You can feel confident in bidding. As experienced eBay sellers we strive to provide top notch. Reliable customer service. We will gladly combine shipping costs for multiple purchases. Please email us if you have any questions before bidding. We are happy to answer them for you. Like this item? Please ... moretake a look at other fun. Unusual, collectible, stylish items in my store! Shipping All items will be shipped within 1 business day of confirmation of payment. Delivery confirmation is included. All items will be properly packaged. AS ALWAYS. WE WILL COMBINE SHIPPING ON MULTIPLE ORDERS! Payment Payment is due within 5 days of close of auction. I will send you an invoice when the auction ends and a friendly reminder on the 3rd day after the close of auction. PAYPAL is the only form of payment I accept on my auctions. Please confirm your PAYPAL account is active prior to bidding! If you have any problems or concerns with payment. Please contact me. I will respond to all e mails. About US: We take great pride in customer satisfaction and maintaining our feedback rating. If there are any issues. Please contact us and give us the opportunity to resolve them before leaving any negative feedback. We will extend the same courtesy to our buyers! Remember. Good communication assures a smooth transaction. THANKS AGAIN! Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Large Studio Drying Oven measuring 30” x 40” is designed to use for drying paintings created with Genesis® Artist Colors or other items. The Oven has an industrial-quality temperature controller that regulates the temperature from 0 to 330 degrees. An insulated brushed aluminum exterior, a silicone heating pad affixed to the interior bottom, and a solid state electronic circuit board with a light indicator. This oven is in excellent working condition and is sized for very items. Runs on 120v and has a high temp of 330 degrees. This item is for local pick up or shipping. Seller must pay for packing and shipping. Easy Access for loading. Located in West Caldwell NJ in Essex County. Liquidating studio so this must be sold.
|
|
WAGNER POWDER SYSTEMS LIGHTED BOOTH EPG2007 WITH PEM-C2 MANUAL GUN BOOTH IS 57" x 57" INSIDE OUTSIDE DIMENSIONS ARE 100" x 74" x 84" TALL THIS POWDER COATING SYSTEM IS PART OF AN ENTIRE SYSTEM WE HAVE FOR SALE.THE SHOT BLASTER.DUST COLLECTION SYSTEM AND THE OVEN IS AVAILABLE IN ANOTHER AUCTION.THIS SYSTEM WAS WORKING WHEN REMOVED FROM SERVICE AROUND ONE YEAR AGO. IT IS BEING SOLD AS IS WHERE IS. YOU ARE WELCOME TO COME AND LOOK AT THIS BEFORE YOU BID.THIS UNIT IS NOT UNDER POWER. WE WILL LOAD THIS FOR FREE BUT WILL NOT ARRANGE SHIPPING OR BE RESPONSIBLE FOR SHIPPING OR HANDLING IN ANY WAY.ALSO WILL NOT SKID FOR FREE BUT WILL DO SO FOR A NOMINAL FEE.MUST BE ARRANGED BEFORE PURCHASE.NOT AFTER* YOU CAN REACH US AT 336-399-2991 WITH ANY QUESTIONS WE RESERVE THE RIGHT TO ... moreREMOVE THIS LISTING AT ANY TIME AS THIS MACHINE IS FOR SALE LOCALLY PAYMENT DUE WITHIN 2 DAYS OF AUCTION CLOSE.CASH OR CERTIFIED CHECK ONLY
|
|
|
Works fine. Updated powdercoat system.wish i didn't these are the best out there Head unit only 100% guaranteed to work tested and working
|
|
|
used powder coat rig made by wagner. complete with gun and control unit and valves. I obtained this from a man who said it worked great but I have no way of testing it
|
|
|
used powder coat gun hot coat pro 1100 retail price new 599.99 used great last time I used it:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-148b1d808ad-0x103-
|
|
|
THIS IS THE EASTWOOD V COAT PRO 1100 POWDER COATING KIT. COMES COMPLETE WITH GUN INSTRUCTIONS AND AIR REGULATOR. COMES WITH A HOST OF POWDERS OF DIFFERENT COLORS. THIS KIT COST OVER $1000 NEW. IT'S A GREAT BUY.
|
|
|
you are bidding on a used working 100KV PROFESSIONAL POWDER COAT PAINT GUN HP751 81 2-672. Come with gun only, no extra, only what you see in photos, for oversea shipping please e-mail for shipping cost, good luck.
|
|
|
In perfect working condition. Was replaced as regular scheduled maintenance.
|
|
|
Nordson Econo Coat powdercoating gun and control box. This controler has adjustable air and voltage. DOES NOT INCLUDE POWDER PUMP. Control box and gun are in good working condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-148e7d2bf6c-0x10a-
|
|
Like New Powder Coating Oven! Inside dimensions 3' x 3' x 6' This powder coat oven has a galvanized steel sheeting on the outside and steel sheeting on the inside with 1280 degree mineral wool insulation and steel framing. It are outfitted with a digital PID controller that holds the temperature within two degrees of the set temperature. Tempered glass windows, 5000 watt burners, and three lighted switches- one for the fan, one for the lights, and one for the controller, along with a built-in track to roll your powder coating racks into the ovens. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it ... morein and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. WE ONLY SHIP TO EBAY AND PAYPAL CONFIRMED ADDRESS. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. This item will ship via UPS or USPS within the USA. Please use our calculator below for accurate rates. Outside of the US we ship by USPS. We ship daily. Monday through Friday. We take pride in packaging each item securely and
|
|
|
Just got it back from Columbia Powder Coating. Gun was repaired everything else checked out good. Have not used since repaired. I purchased the new model. This system will come with the owner's Manuel, two containers, one hose all the attachments that I got will it when purchased new. This set up cost me over 800.00 new. This is a commercial grade system. Air pressure and voltage is adjustable you will waste less powder and get a better finish than the cheap ones. The only reason I'm selling is because I upgraded to the new one. Will only ship to the lower 48 states. Must pay in full within 48 hours. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-148f6cff63d-0x114-
|
|
|
For sale are two Sames GNM 100 Manual Powder Guns. The guns have been cleaned. And tested in working electrostatic order. There are multiple spare parts included. Also, included are 6 Sames Fluidizing Powder Hoppers. The hoppers are also used and have been cleaned. These items are being sold"AS IS" Thank you for viewing! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end.
|
|
|
Very nice Nordson encore powder unit just removed from plant. If you need more information please call Keith at 719-661-9947
|
|
|
Nordson Versa Spray II powder unit with gun cables and power cable just removed from plant Everything seems to work good looks like new parts have been put on it. If you need more information please call Keith at 719-661-9947 g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-1490d826deb-0x110-
|
|
THIS MILLER CURING OVEN. 8 MIL BTU BURNER, 17'L X 8'W X 7'T INTERIOR DIMENSIONS AND HAS OVEN DOORS ON BOTH ENDS. HAS PROCESS TIMER AND CHART RECORDER. REQUIRES 220-240 3 PHASE POWER. APPROXIMATELY 25 AMPS FOR BOTH PAINT BOOTH AND OVEN TOTAL. WILL BREAK DOWN AND WELD CROSS BRACES FOR SAFE TRANSIT. WILL BE AVAILABLE IN FIRST WEEK OF NOVEMBER 2014. FULL PAYMENT AT END OF AUCTION. INCLUDES(1) BINKS SPRAY BOOTH 16' X 10' INTERIOR DIMENSION WITH THREE STAGE FILTER SYSTEM. TWO POCKET STAGES, ONE HEPA STAGE AFTER FAN, FIRE SUPPRESSION SYSTEM, AIR INTERLOCK AND ALL NECESSARY ELECTRICAL. DON'T FORGET ANY BOOTH YOU PURCHASE REQUIRES A FIRE SUPPRESSION SYSTEM. SO ADD 3.000.00 TO ANY NEW BOOTH YOU ARE CONSIDERING. 1) PG-1 ITW GEMA POWDER COATING GUN COMPLETE WITH STAINLESS STEEL ... moreHOPPER IN WORKING ORDER. YOU CAN DEMO THE COMPLETE UNIT NOW UNTIL END OF OCTOBER. SHIPPING WOULD BE ONE OVER WIDTH TRAILER. OVEN SHIPS COMPLETE LESS BURNER BOX. BOOTH PLENUM WITHOUT FAN HOUSING. BOOTH WALLS SHIPPED IN 3 UNITS. OTHER ITEMS SUCH AS LIGHTS. ELECTRICAL COMPONENTS AND MISC CRATED. IF SOMETHING DOESN'T FUNCTION AT POINT OF DELIVERY WE WILL REPLACE ANY DEFECTIVE PARTS LESS FREIGHT DAMAGE. LOCAL DELIVERY AVAILABLE OR LOAD FOR FREE. MORE PICTURES AVAILABLE. A COMPLETE BUSINESS WAITING FOR YOU. NO CHEESEY SETUPS. CAN FABRICATE NEW RACKS FOR THIS OVEN AT AN ADDITIONAL COST.
|
|
|
1/2 Pint can of red lead primer manufactured by PUR-ALL Paint Products Co. Can seems to be quite old. Don't know if it's any good Can seems full. Has dents and dings. See photos
|
|
|
System comes with the booth. Recovery system, air dryer, power unit, and gun. Complete unit. Filters not included. Email for more info wohorsy1997@yahoo.com 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-1492b9a7b13-0x10f-
|
|
|
You are bidding on a good used Nordson Sure Coat powder coating handgun with a Cable only. There is no tubing. Powder hose, nor nozzle as shown in the pictures. A new gun nozzle can be provided at the expense of the buyer for@$50.00 The gun is still in good working order having been tested and cleaned by TWS Industries. Inc. personally.
|
|
|
800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 800x600 800x600 O-171: Protherm Powder Coating Infrared Oven Design: 3’0” w x 6’6” h Opening Mfg: Protherm Type: Electric Infrared Oven used for Powder Coating, Design: 3’0” w x 6’6” h Opening, 16 Heaters@ 22 amps each 480 V 3-Ph. 400 amp service) Control System, Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Removed from service 2014, For questions please call Nick@ 920.361.5208 x 206 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
|
For your bidding pleasure today is another standard operating GEMA powder coating powder pump. Each one comes with a side mounted insulated electrical hose barb. As well as two top mount quick disconnect check valve fittings. It too. Can be retrofitted for use on nearly any and all types of powder coating equipment, including hoppers, etc. for Nordson, Wagner, Parker Ionics. Along with Gema, of course. These are currently being marketed as the top quality standard Gema powder pump for use on their equipment. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14932acc212-0x109-
|
|
|
Moderately used. It's in great condition and stored properly with oils in the tanks. Knock off the dust on top and it's ready to go. Will ship on your dime. Seriously best respectable offer can take it.
|
|
Grieve Industrial Coating Drying Curing Oven Rotating Material 18KW TB-500 Up for sale we have a Grieve Industrial Coating Drying Curing Oven in good working condition. It has a rotating material rack inside. It is a model TB-500 which is rated at 18KW and 500 degrees F. The internal dimensions of the oven are 51" deep x 48" wide x 60" tall. The oven has controls for the heater. Fan, and timer. It operates on 440V. 3 Phase AC power. The rotating material rack has a separate power connection and operates on 115V. 60 Hz AC power. Great deal on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer is responsible for shipping charges. The ... moreshipping weight 2300 lbs and the dimensions are 80" L x 75" W x 81" H. Unit will be strapped to a pallet and shipped from Hayward. CA 94545. Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now
|
|
|
Complete Powder Coating Oven with agitator. Rack, 30 gallon compressor, and specialty wand. Oven is 6X6X10 and is 3 phase electric. Used for 3 monthes and now need to sell.
|
|
|
This is for a Hot Coat Powder Coating System Eastwood model 198 and supplies. I am not familiar with this item and know nothing about it. It will be sold as is. Everything in the pictures is what you are bidding on. The 5 cans of powder material are as follows and the amounts are approximate: Lime green about 3/4 full-Bright red about 1/4 full-High gloss black about 1/2 full-Bright yellow about 1/2 full-Semi gloss black about 3/4 full. This item is untested and sold as is. I will do my best to answer any questions. Thanks for looking.
|
|
|
Used Pollution Control Products burn off oven. Runs on natural gas and measures 72" wide by 103" tall by 72" deep on the inside. This unit sells new for $40K. In pretty good overall condition. Was in working when taken out of production. Can load onto purchaser provided truck. Buyer is responsible for shipping cost. Thanks for looking. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-149481d44ae-0x111-
|
|
|
Up for grabs is a 4 foot by four foot table top powder coating booth from JC metal fabrication. The booth is fully disassembled and ready for pick up in greenpoint brooklyn. THIS booth sells for 1185.00 new It was purchased new in 2012. Auction includes blower motor. Air regulator, early version of the eastwood hotcoat system. Auction does not include any filters. Filters may be purchased from the manufacturer. Here is your chance to get a good working powder coating booth. Available for pick up only Will not ship
|
|
|
THIS IS A NICE NORDSON VERSA SPRAY II GUN COMPLETE WITH 25# AND 50# FLUIDIZING HOPPERS. WE'VE HAD IT AS A BACKUP AND USED IT OCCASIONALLY FOR PRIMER. I JUST HAD IT SERVICED BY THE NORDSON SERVICE CENTER(REPAIR INVOICE IS IN THE PHOTOS) THEY REPLACED A RESISTOR AND SEVERAL SMALL PARTS REPLACED. NEW 16' HOSE PUT ON ABOUT 5 MONTHS AGO. WILL SHIP ON A PALLET IN U.S. ONLY(EXCLUDING ALASKA. HAWAII) FOR ACTUAL FREIGHT NOT TO EXCEED $150. NICE WORKING GUN.
|
|
|
For sale is a USED Fremont Model 512 Pressure Washer. The washer was removed in working order and stored inside since removal. The item is ready to go upon purchase. This item is being sold"AS IS" Thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1497ec2a50c-0x108-
|
|
|
We just upgraded our system and no longer need this unit. It works as it should. It is complete and ready to shoot powder. Fan tip and standard tip included. This unit is industrial grade and built to last. I ncludes vibratory stand and box feeder
|
|
None None None None 4 10 2014-10-10T16:11:00Z 2014-11-10T18:27:00Z 2 451 2574 NON 21 6 3019 14.0 Clean Clean false 0 0 false false false false EN-US JA X-NONE This Item is a Lease Repossession. Located in Montrose. CO 81401 Up for auction is a Powder X Complete Powdercoating This system is less than one year old with a estimated use of 60 days. If you were to purchase this system new you would pay over $53.000 The banks loss is your gain! System Includes: 10’ W x 8’ H x 10’ L Spray Booth(Wired 1 Phase 22 Volt) with complete unit 3 stage filtration(Blanket/Pocket/ Hepa) Ultimate-X steam Phosphating Unit Wired 1 Phase 22 Volt) 8’W x 8’H x 10’L(inside dimension) batch oven. Doors on one end, burner on rear, natural gas fired, wired 1phase 220 Volt 1836 Double Duty Abrasive Blast Cabinet. GEMA ... moreBox Feed Powder Application Unit Complete. OptiFlex2-B Purchaser is liable for shipping. We can assist in helping to load the equipment but require buyer to be present. This provides you with the competitive edge of purchasing this great piece of equipment. And due to the economy, at a fraction of the price! Please check our ratings. You will find we have a reputation of selling very high quality equipment at extremely affordable pricing. Please check our other auctions for other equipment and bookmark us, we have a large amount of equipment coming this month. Why pay over $53.000 for new when you can have this gently used, less than one year old booth for much less. For discounted shipping quote please contact: Lorraine Manion Mi Logistics. LLC PHONE 704-312-4045 FAX 704-994-8479 Email for a quote to: lorraine@mi-logistics.com Shipping fees include all costs incurred by the seller including processing. Shipping, handling, packing materials, and related expenses. Everything shipped is insured. WA residents are subject to sales tax. Sincerely Jeff O'Day President/ Managing Director First Pacific Funding 10700 Woodinville Drive Bothell. WA 98011 877-953-2733 Ext 203 Fax 877-953-3555 Payment A $2.000 payment must be sent Via
|
|
|
As found in an old painters work kit. Bottle is about 2/3 full. See photo 3-it is about to that level.
|
|
|
This booth was purchased back in June of 2014. And its perfectly in running condition. It contains a explosion proof light overhead, a fan and light switch that is mounted on the panel outside of the booth. The vacuum/collection system is a HEPA 4000cfm collection system mounted on the rear of the booth. The collection system is 2.5ft deep and 5ft wide. This booth works like a champ and is ready for a new home. I paid $4700 with shipping on this, and just ordered a new bigger(were growing! booth for my operation. Serious buyers only! Thank you!
|
|
|
Nordson DEMO-VS Part No: 185295C Serial: AA96J20174 Gun P/N 173125A S/N AA86H21789
|
|
CONTACT US WITH ANY QUESTIONS/READ DESCRIPTION BEFORE BIDDING-SUBMITTING OFFERS. This listing is for a used"like new" powder coating oven. Oven extension and(potentially)2) customize-able roll-in racks. The oven operates flawlessly. And has been in operation for about 6 months. After taking on new, larger customers we purchased a larger, gas fired oven but after a rush job came in(and not having the new oven yet) we were forced to extend the oven so it would be capable of handling larger parts. We are in anticipation of receiving our new oven in a couple weeks and now, this one is up for sale. This oven is fully operational and still in use and can be seen in operation by appointment for prospective buyers. Includes: 1) 6x6x4' Electric Powder Coat Oven. 1) 6x4x4 Extension(making ... morethe oven a total of 10' long. 4' wide, and 6' tall of usable space) 1) Baffle to direct circulation air when using extension. Available: 2) 6x6x4(aprox) roll-in racks. NOTE: see"RACKS" description) OVEN: 6x6x4 of usable space. 3 phase electric oven 208-250 volt- draws 76 amps under full load. With 50% power switch to conserve energy once set temperature is reached. Has full customizable PID controls with digital timer box, which is set to kill power to burners when set time has been achieved. 2 mechanically driven fans blow directly over the burners to ensure equal distribution of heat whether 1 part or 100 parts. I can personally attest to the air flow being excellent but not too much as to blow powder off the parts before it has the chance to melt. Includes 100A disconnect which we added, and gate controlled exhaust to vary exhaust flow so that heat runoff is minimal. We personally sealed nearly every seam of this oven with high temp RTV after receiving to ensure as little heat-loss possible outside, and there would be no chance for insulation material to escape inside oven for contamination of perfection jobs. There is a 2 year warranty from the manufacturer from the date of original purchase. THIS O
|
|
|
For sale is a Sames GNM 100 Manual Powder Coating system. The control& gun have been cleaned and tested in working electrostatic order. There are multiple spare parts included. Also. Included is a Sames Fluidizing Powder Hopper. The hopper is also used and has been cleaned. These items are being sold"AS IS" Thank you for looking!
|
|
|
nordson verspray ll manual powder coating gun and 30# hopper includes 3 spair pc boards
|
|
|
This was being used in a plant nearby.Worked. But they no longer use that type of application.Just what you see in the pictures.Buyer picks up or handles shipping.
|
|
|
One Nordson Powder Coating Pump(for Large Hopper) Powder Coat Painting Pump Assembly includes: Nordson Powder Pump Unit- Stainless Steel Pick-up/Feed Tube
|
|
This is a used Eurotec GCU400 manual powder coating gun that was recently in use in our powder coating facility before closing the business. This unit is in very good working condition with normal wear and tear. This gun is missing the hose connection insert on the handle of the gun. This part will need to be purchased. The specs on this gun can be viewed at the following web address: sames-technologies.org/eurotec-finishing/products.html#ManualGunMG400 I also have a hopper unit for sale that is also in very good condition. SPECIFICATION GCU400 Electrical Data Input Voltage 100-240 Volts 50/ 60 Hz single phase Power Consumption(full load) 45 VA Input Current(max. 400 mA at 115 V 200 mA at 230 V Electrostatic output voltage(max. 10- 85 kV negative. Electrostatic output current Mode 1; 0- 50 ... moreuA Mode 2; 0– 100 uA. Electrical Controls Mains Switch- Front Panel Rotary 3 position- OFF/ON/REMOTE(AUTO) OFF/ON/E‟STATICS OFF(MANUAL) Mode Selection Front Panel Push Button LED‟s display mode selected TEC 1(mode 1) TEC 2(mode 2) Charge Control- Front Panel Push Buttons +/ to increase or decrease Sets the maximum level of kV(Mode1) Sets the maximum level of uA(Mode2) Set Value Display Front Panel Numerical LED Indicator Displays set max. kV. Mode1) TEC1 Displays set max. uA. Mode2) TEC2 Electrostatic Charge Indicators Front Panel LED Bar Graphs 0 to 100 μA/ 0 to 100 kV 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-149c492e78b-0x109-
|
|
|
Just in today and in great shape. All stations work as they should. Comes with what is in the pics, no guns, we are trying to locate as we speak. Great deal! We will put on skid,band,wrap and load for free.
|
|
|
This was never actually used. However the handle is cracked. I don't know if it was during shipment or a customer return. It powers up as it should. I have one of these I use and they are great. The red knob is intact on this one which is the first thing that snaps off on these. Use caution when removing/locking the powder cup Comes as shown As-Is. No other accessories.
|
|
|