|
|
Order by: |
0 bids Free Shipping
Condition: New Location: , United States
(1 Set D6 Pneumatic Tamping Machine. 1) Front Sealing Ring: It can protect the piston from excessive dust and debris. ★ Strong and Durable: Made of high-quality cast iron, it can resist wear, corrosion, heat, and deformation.
0 bids Free Shipping
Condition: New Location: , United States
D9, Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type. 1 X D9 Pneumatic Tamping Machine. Piston Stroke: 207mm. Your satis faction is our ultimate goal. Piston stroke207mm.
0 bids Free Shipping
Condition: New Location: Chino, United States
The ramming of foundry sand in an impact way can be used to solidify in the smelting industry, and can also be used to make bricks and concrete in construction projects. Specification: Length: 950-1095mm Weight: 6kg Use air pressure: 0.63Mpa Impact frequency: ≥14Hz The use of gas: ≤ 13L/S Piston stroke: 100mm Piston diameter: 25mm Trachea inner diameter: 13mm Hammer head diameter: 42mm Include: 1 x D6 Pneumatic tamping machine.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Applications: The ramming of foundry sand in an impact way can be used to solidify in the smelting industry, and can also be used to make bricks and concrete in construction projects D9 , large working capacity, suitable for tamping work of large casting sand type Specifications: Length: 1180mm Use air pressure: 0.63Mpa air consumption : 0.65l/s Impact frequency: 600hz The use of gas: ≤ 15L/S Piston stroke: 207mm Piston diameter: 32mm Trachea inner diameter: 13mm Hammer head diameter: 54mm Weight: 9kg Includes: 1 x D9 Pneumatic Tamping Machine.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Crimp Width 7/8" (22mm). Punch 15/64" (6mm). arsenic and chromium from chemically treated lumber. Sheet Thickness Up To 18 Gauge (0.8mm). Swivel Head. WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
0 bids Free Shipping
Condition: New Location: Willowbrook, United States
High quality ergonomic bucking bars designed to prevent repetitive motion injury while riveting. Enjoy easier, better riveting that studies show will result in less wrist strain and fatigue. Higher density reduces vibration and kick back while riveting.
Buy It Now
Free Shipping
Condition: New Location: Goshen, United States
0 bids $9.75 Shipping
Condition: Used Location: San Antonio, United States
0 bids Free Shipping
Condition: Used Location: Farmington, United States
Ingersoll Rand 3RLN IN-LINE Air Screwdriver, Nutrunner Lever Start, ¼” QC spindle [Z1S6] #3. Lever push to start. Refurbished TESTED WORKING PULL.
0 bids Free Shipping
Condition: New – Open box Location: Staten Island, United States
Brand New AirSpade Supersonic Nozzle 105 CFM 90 PSIG. Shipped with USPS Ground Advantage.
Buy It Now
$4.59 Shipping
Condition: Used Location: San Antonio, United States
Hi-Lok Hi-Tigue Protrusion Gauge. - Will either be on a chain (as shown) or on a cable. - Located on the top right of the page.
0 bids Free Shipping
Condition: New – Open box Location: Sylvania, United States
New 1/8" Grinder Collet for Apex/Dotco turbine grinders. Compatible with the following models: 10R0400-13, 10R0400-18, 10R0401-13, 10R0401-18, 10R0412-18, 10R9000-03, 10R0400-13, 12R0400-18, 12R0410-18, 12R9180-03, 12R9180-08, 12R9180-43, 12R9180-48.
0 bids Free Shipping
Condition: New Location: , United States
1 Pneumatic Shovel. Straight Scraper Knife Size: Approx. 140 21mm / 5.5 0.8in. Arc Scraper Knife Size: Approx. 1 Straight Scraper Knife. 1 Arc Scraper Knife. 3、Wear-resistant aluminium alloy body ensure long service life.
0 bids $9.00 Shipping
Condition: New Location: Chino, United States
Applications: The Ramming of Foundry Sand in an Impact Way Can Be Used to Solidify in the Smelting Industry, and Can Also Be Used to Make Bricks and Concrete in Construction Projects D9 , Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type Specifications: Length: 1180mm Use Air Pressure: 0.63mpa Air Consumption :0.65l/S Impact Frequency: 600hz The Use of Gas: ≤ 15l/S Piston Stroke: 207mm Piston Diameter: 32mm Trachea Inner Diameter: 13mm Hammer Head Diameter: 54mm Weight: 9kg Includes: 1 X D9 Pneumatic Tamping Machine.
0 bids Free Shipping
Condition: New Location: Chino, United States
D9, Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type. 1 X D9 Pneumatic Tamping Machine. Piston Stroke: 207mm. Your satis faction is our ultimate goal. Use Air Pressure: 0.63mpa.
0 bids Free Shipping
Condition: New Location: Chino, United States
(1 Set D6 Pneumatic Tamping Machine. 1)Front Sealing Ring: It can protect the piston from excessive dust and debris. ★Strong and Durable: Made of high-quality cast iron, it canresist wear, corrosion, heat, and deformation.
Buy It Now
Free Shipping
Condition: New Location: Alice, United States
Buy It Now
Free Shipping
Condition: New Location: Bronx, United States
This Astro Pneumatic Tool Smart Eraser Pad is the perfect addition to your toolkit for efficient and effective pinstripe removal. Its high-quality construction and durable design ensure long-lasting use.
0 bids Free Shipping
Condition: Used Location: Hudson, United States
Used and works good, I have 100 more just like it if you need to order more than one. They sell brand new for roughly $410 so get them while they last.
Buy It Now
$5.00 Shipping
Condition: New Location: Crestview, United States
Brand new rivet removal tool, #40, #30, #21 and #10
0 bids $18.00 Shipping
Condition: Used Location: Austin, United States
DOTCO PNEUMATIC 90 DEGREE DRILL AIR 1/4-28 BITS, NOT SURE OF THE PART NUMBER OR RPM
Buy It Now
$18.00 Shipping
Condition: Used Location: Burnsville, United States
All instruments work perfectly and were lubricated.
Buy It Now
$8.75 Shipping
Condition: Used Location: Canyon Lake, United States
This is a very nice ATI heavy duty aluminum body air vacuum. The model is AT560MF18. It has a 18" flexible hose. Made in the USA.
Buy It Now
$2.93 Shipping
Condition: New Location: Draper, United States
Pusher 1015300 OMR for SS-5020 SS-5020DLAF SS-5020S. Condition: New & Genuine OEM Part Made in Italy. Includes: Everything as shown, nothing else is included. If the item up for sale is tested, we will state so clearly.
Buy It Now
Free Shipping
Condition: Used Location: Murfreesboro, United States
VINTAGE DESOUTTER PNEUMATIC PISTOL DRILL TOOL with bit.I can’t read the model number on this item- it is worn off. Appears to be in good condition. Not locked up. Some surface rust. Has scratches and signs of use. Please see video and photso. I have not tried to clean- will leave that to the buyer if desired. I don’t have a lot of knowledge about this item, so I am not sure if it is normal or not for the trigger to be this way- please see video. The bit is Jacob’s 1BA 378-24 THD 0-1/4”, 0-6,5 mm CAP. Storage- Bag D
Buy It Now
Free Shipping
Condition: Seller refurbished Location: Goddard, United States
Magnavon Microstop Countersink. 1/4"-28 Threaded Shaft for Cutters. 9/32" Shaft Travel. Constructed with sealed twin radial type ball bearings for shaft. Can be used with quick change chucks or key type chucks.
0 bids Free Shipping
Condition: New Location: , United States
Crimping pliers for crimping 12-20 AWG insulated and uninsulated wires. 1 Crimping Pliers. Stripper, strip 12-20 AWG wire cutter, capable of cutting above and below the pivot. This is a 4-in-1 cable repair tool with professional design.
0 bids $9.75 Shipping
Condition: Used Location: San Antonio, United States
This high-quality APT reversible 1/4-28" threaded thin pancake drill is a must-have for any aircraft tool enthusiast. Designed for precision and durability, this drill is perfect for use in the aerospace industry. With its sleek design and easy-to-use features, you'll be able to complete your work with ease.Crafted from top-quality materials, this drill is built to last. Its reversible feature allows for maximum versatility, making it perfect for a wide range of applications. Whether you're a professional or a DIY enthusiast, this drill is sure to become a valuable addition to your tool collection.HAS A SAND SPOT ON THE TOP. IT DOES NOT AFFECT THE TOOL AT ALL
0 bids Free Shipping
Condition: New Location: Chino, United States
D9, Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type. Piston Stroke: 207mm. 1 X D9 Pneumatic Tamping Machine. Your satis faction is our ultimate goal. Use Air Pressure: 0.63mpa.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
D9, Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type. 1 X D9 Pneumatic Tamping Machine. Piston Stroke: 207mm. Your satis faction is our ultimate goal. Piston stroke207mm.
0 bids Free Shipping
Condition: New Location: , United States
Applications: The ramming of foundry sand in an impact way can be used to solidify in the smelting industry, and can also be used to make bricks and concrete in construction projects D9 , large working capacity, suitable for tamping work of large casting sand type Specifications: Length: 1180mm Use air pressure: 0.63Mpa air consumption : 0.65l/s Impact frequency: 600hz The use of gas: ≤ 15L/S Piston stroke: 207mm Piston diameter: 32mm Trachea inner diameter: 13mm Hammer head diameter: 54mm Weight: 9kg Includes: 1 x D9 Pneumatic Tamping Machine.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Model: D6 Material: Cast Iron Assembly Required: Yes Use Air Pressure: 0.63Mpa Gas Consumption: 0.45L/s (0.11gal/s) Impact Frequency: 700Hz/s Piston Diameter: 25mm/0.9inch Piston Stroke: 155mm/6inch Hammer Head Diameter: 42mm/1.6inch Trachea Inner Diameter: 13mm/0.5inch Gross Weight: 6kg/13lbs Package Size: 61*19*10cm/24*7*3inch Product Total Length: 97.5cm/38.38inch.
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
All products represented by Mainland Valve & Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture. All products represented by Mainland Valve & Fitting, Inc. that is noted as factory new are factory new and are warranted only by the manufactures warranty.
0 bids Free Shipping
Condition: New Location: Draper, United States
O Ring Gasket. for SS-1820 Stapler New. Condition: New. This stamp does not affect the functionality or value of the item. We are not a giant corporate entity. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
Buy It Now
$14.00 Shipping
Condition: Used Location: Crestview, United States
Dotco 90 and 45 Degree 1/4-28” Threaded Drill Aircraft Tool. 3100 RpmsRpms, both run straight and trueIf purchasing several different items I will combine shipping.1. Please use the "Add to cart" feature. 2. When done shopping press the "Request total from seller" button - (Located above the first item in your cart.)3. I will then send you an invoice with the appropriate shippingamount.
Buy It Now
$6.00 Shipping
Condition: New Location: Mentor, United States
COILHOSE PNEUMATICS #770-S. Variable Flow Trigger. Fixed Nozzle Prevents Removal of Safety Nozzle. Tip Style Fixed Safety.
0 bids Free Shipping
Condition: New Location: , United States
1 Pneumatic Shovel. Straight Scraper Knife Size: Approx. 140 21mm / 5.5 0.8in. Arc Scraper Knife Size: Approx. 1 Straight Scraper Knife. 1 Arc Scraper Knife. Suitable for casting sand cleaning and welding before the opening groove, weld slag after welding, flat solder scar, correction of the opening work of stone, concrete and brick wall.
0 bids Free Shipping
Condition: Used Location: Cudahy, United States
90° Rotating Air Punch and Flange Tool, Pneumatic Tool for Auto Body Sheet Metal. Condition is Used. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: New Location: , United States
Length: 1180mm. D9, Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type. 1 X D9 Pneumatic Tamping Machine. Piston Stroke: 207mm. Your satis faction is our ultimate goal. Piston stroke207mm.
Buy It Now
$10.00 Shipping
Condition: New Location: Chino, United States
Applications: The Ramming of Foundry Sand in an Impact Way Can Be Used to Solidify in the Smelting Industry, and Can Also Be Used to Make Bricks and Concrete in Construction Projects D9 , Large Working Capacity, Suitable for Tamping Work of Large Casting Sand Type Specifications: Length: 1180mm Use Air Pressure: 0.63mpa Air Consumption :0.65l/S Impact Frequency: 600hz The Use of Gas: ≤ 15l/S Piston Stroke: 207mm Piston Diameter: 32mm Trachea Inner Diameter: 13mm Hammer Head Diameter: 54mm Weight: 9kg Includes: 1 X D9 Pneumatic Tamping Machine.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
5 multipurpose 3/8-24 threaded nozzles for Capri Tools CP21089 2-Way Air Blow Gun: Air Shield Nozzle, High Flow Nozzle, Air Concentration Nozzle, Air Spreader Nozzle, and Rubber Tip Air Shield Nozzle creates a side air flow forming a shield to prevent a backflow of dust to user High Flow Nozzle doubles the air flow Air Concentration Nozzle focus air on specific spots while the Air Spreader Nozzle distributes air over a wide area Rubber Tip protects delicate surfaces while you work These multipurpose nozzles extend the capabilities of the Capri Tools CP21089 2-Way Air Blow Gun. Five multipurpose nozzles are included: Air Shield Nozzle, High Flow Nozzle, Air Concentration Nozzle, Air Spreader Nozzle, and Rubber Tip.
0 bids Free Shipping
Condition: Used Location: Woodinville, United States
Screw Removal Tool. 1/4" Hex bit receptacle machined into tool. 5-1/2" OAL.
Buy It Now
Free Shipping
Condition: New Location: Fort Lauderdale, United States
Buy It Now
Free Shipping
Condition: Used Location: Tuckerton, United States
Good, used, working condition.
0 bids Free Shipping
Condition: New Location: Willowbrook, United States
High quality ergonomic bucking bars designed to prevent repetitive motion injury while riveting. Enjoy easier, better riveting that studies show will result in less wrist strain and fatigue. Higher density reduces vibration and kick back while riveting.
Buy It Now
Free Shipping
Condition: New Location: Seaford, United States
UP FOR SALE- DEWALT 20V MAX Heat Gun，990 Degrees，42 Minutes of Run Time，LED Light(DCE530B)
0 bids Free Shipping
Condition: New Location: , United States
Crimping pliers for crimping 12-20 AWG insulated and uninsulated wires. 1 Crimping Pliers. The overall has 7in length, beautiful appearance and comfortable grip. Stripper, strip 12-20 AWG wire cutter, capable of cutting above and below the pivot.
0 bids Free Shipping
Condition: New Location: North Providence, United States
Pneumatic tool lubricant 16 oz. Air Tool Oil. This air tool oil is specially formulated to maximize air tool performance. The air tool oil prevents rust, corrosion, gum and varnish build-up while removing deposits.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
The Interstate Pneumatics F7331-12 Brass Hose Ferrules are high-quality components designed for heavy-duty applications.
Buy It Now
Free Shipping
Condition: Used Location: Longmont, United States
Everything has an issue of a varying degree
Buy It Now
$5.00 Shipping
Condition: New Location: Buena Park, United States
Jaw set is used to pull ¼ aluminum, steel and monobolt rivets.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Crimp Width 7/8" (22mm). Punch 15/64" (6mm). Sheet Thickness Up To 18 Gauge (0.8mm). Swivel Head. Credit Card.
Buy It Now
Free Shipping
Condition: New Location: Faribault, United States
LIGHT WEIGHT, REVERSIBLE FOR QUICK EASY ACCESS.
Buy It Now
$4.25 Shipping
Condition: New Location: Breeding, United States
Buy It Now
Free Shipping
Condition: Used Location: Canby, United States
Angle head air nibbler for easy cutting. I connected this to my air compressor and observed the cutting-edge move, other than that it is untested. Low profile throttle lever.
0 bids $35.00 Shipping
Condition: New – Open box Location: Nashville, United States
UNUSED HYTORC PNEUMATIC J-GUN WITH 3/4" DRIVE AND REACTION ARM. COMES WITH CALIBRATION DOCUMENTATION AND OPERATOR'S MANUAL IN PELICAN STYLE CASE. EMAIL WITH ANY QUESTIONS. THANKS FOR LOOKING!
Buy It Now
$2.00 Shipping
Condition: New Location: Salem, United States
Replaces Part #2006. Complete set of 4 blades.
Buy It Now
$4.25 Shipping
Condition: New Location: Breeding, United States
0 bids Free Shipping
Condition: New Location: Chino, United States
Applications: The ramming of foundry sand in an impact way can be used to solidify in the smelting industry, and can also be used to make bricks and concrete in construction projects D9 , large working capacity, suitable for tamping work of large casting sand type Specifications: Length: 1180mm Use air pressure: 0.63Mpa air consumption :0.65l/s Impact frequency: 600hz The use of gas: ≤ 15L/S Piston stroke: 207mm Piston diameter: 32mm Trachea inner diameter: 13mm Hammer head diameter: 54mm Weight: 9kg Includes: 1 x D9 Pneumatic Tamping Machine.
0 bids Free Shipping
Condition: New Location: Chino, United States
Applications: The ramming of foundry sand in an impact way can be used to solidify in the smelting industry, and can also be used to make bricks and concrete in construction projects D9 , large working capacity, suitable for tamping work of large casting sand type Specifications: Length: 1180mm Use air pressure: 0.63Mpa air consumption :0.65l/s Impact frequency: 600hz The use of gas: ≤ 15L/S Piston stroke: 207mm Piston diameter: 32mm Trachea inner diameter: 13mm Hammer head diameter: 54mm Weight: 9kg Includes: 1 x D9 Pneumatic Tamping Machine.
|
|
|
|
8 PIECE 100 DEGREE COUNTERSINK SET-IN VERY GOOD CONDITION! SOME LOOK UNUSED-100 DEGREE COUNTERSINK SET-1/4" X 28 THREADED-8 PIECE SET IS MARKED AS FOLLOWS: 1 EACH 1/4-2 EACH 1/2-2 EACH 3/16-1 EACH 3/8-2 EACH 5/8-THEY COME EXACTLY AS PICTURED! GREAT FIND!
|
|
|
2 Cleco pliers + clecos in working condition. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e0340f3f8-0xf2-
|
|
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Cogsdill Tool Products Deburr Tool 3491-1963-135 This Cogsdill deburr tool looks like it has seen minimal use. The shaft is 4.5 inches long and mics out.2435(0065 less than 1/4" hole) This is an"in and out" deburrer. Getting both sides of the hole, and will save you considerable time on those already demanding days. This tool is in great condition. Please see the pictures. If you have further questions on these. Please feel free to ask. I'll get back to you as soon as I can. These aerospace quality. Aviation tool were purchased from an aviation machinist/ mechanic that was transferred from our area. All of these tools are made in the USA. Please look at the pictures as some of them might have rust spots from ... moremetal dust as most have been used. Please see our other items as we will be listing them all as fast as we can. Feel free to email any questions before purchasing if you have any questions. I will do my best to answer them as accurately as I can. We are presently only shipping to the Continental US. Hawaii, Alaska and Puerto Rico Thank you for looking. We hope you found what you're looking for! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
USED Christie Reflex Charger Analyzer RF80GT Output Cables& Manuals. Normal 0 false false false MicrosoftInternetExplorer4 USED Christie Reflex Charger Analyzer RF80GT output cables& manuals. Normal 0 false false false MicrosoftInternetExplorer4 Unit was pulled from a working environment sold as-is pictured. Local pick up only! Unless you hire your own freight company. I will work with your freight company to ensure prompt delivery. Estimated weight 250 to 350 lbs. uShip For detailed questions please message me or call 214-399-6649 for more immediate assistance. Normal 0 false false false MicrosoftInternetExplorer4 All Items are sold AS-IS Pictured! No Returns! No Warranty! Please check out my EBAY store for more great deals! Normal 0 false false false MicrosoftInternetExplorer4 Delivery ... moreconfirmation is always used! Please leave us positive feedback and rate us 5 stars on feedback I try to be accurate in my descriptions. I also include numerous photos with all of my listings. Please ask any questions you may have before bidding! Also please take the time to read and understand my auction terms thoroughly before bidding! Thank You. I reserve the right to cancel bids from bidders with negative feed back for non-payment and or lack of feedback. EBay Buyer Feedback Policy: I will leave feedback for you after you leave feedback for me. In this way. I know that: 1) you have received the product, 2) are a user that understands the value of the Ebay feedback, DSR process and 3) that the transaction is complete and you are satisfied. If payment for auction is not received. Ebay will be notified by non paying bidder alert. Your Bid is a Legal Contract per the eBay user agreement and is bound by the terms stated in this listing. We appreciate your business. Thank you for taking the time to view this auction. Payment is due upon completion of auctions end! I am committed to completing the transaction. I hold the winning bidder accountable for his/her winning bid. Placing a bid on this auction is a legally binding obl
|
|
Lindstrom 8148 Ultra Flush. Small Tapered Cutter Exc Cond Jewelry Aviation Tool This is a Lindstrom 8148 Ultra Flush. Small Tapered Cutter, in lightly used condition. There are 35 sets available. My tools are used. Clean, aircraft quality tools in very good to excellent condition, many of them brand new. Nothing broken, chipped or abused, unless it's indicated) I try to show any flaws in the photos and description. If you're experience with us isn't as you expected you have 14 days to return the item for a full refund unless stated otherwise. I leave feedback as soon as I know that you've recieved the item and are happy with it. Feedback is important to me. I always leave it. Expedited 1-3 day shipping. I try to ship the same day after payment at the latest. There is always ... morea tracking number. However the tracking number stops at international borders. I gladly ship overseas but can't guarantee shipping past our border. I've never had a failed shipment but delays happen out of my control. Free shipping anywhere in the USA. $13.45 shipping worldwide. Shop my store for more items. I gladly combine shipping wherever possible. Put me on your favorites list and check back for new items. Questions about an item? 253-736- 5811 Thanks. Dave Wood
|
|
|
The bid is for a Nycoil Reel Tool Balancer up to 10 Pound Made in USA as pictured. This unit is in good working order and ready to use. Buyer to pay actual cost of shipping this item by UPS or USPS with delivery confirmation. Thanks for viewing my auction and have fun bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e06c1fb55-0xfd-
|
|
THIS LISTING IS FOR A APC PNEUMATIC IMPACT WRENCH& PNEUMATIC 3/8" DRILL with ACCESSORIES AND CASE Impact Wrench: Model 2450 Pneumatic Drill: Model 2425 These items are used but in good condition. Please view pictures carefully! Please contact us with any questions concerning this item before purchase! Please feel free to make an offer! Every offer received is seriously considered! This item is covered by our 14 day Warranty. Please visit our store and other listings for more great deals! Thank you for browsing our listing! International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs ... morewill be prior to bidding or buying. Our warranty(when offered) only covers items that are DEAD ON ARRIVAL(DOA) Please direct ALL questions and/or concerns through Ebay's Contact Seller Module. Customer satisfaction is our highest priority and we strive for five star ratings in every category on ebay. If you feel we have fallen short of that goal in any way please contact us before leaving negative feedback to allow us the opportunity to resolve any issues that you my have with your product to your complete satisfaction! 60710
|
|
|
FOR SALE IS A USED HI SHEAR HLK 22 INSTALLATION KIT WITH VARIOUS ACCESSORIES. THIS WAS USED IN AN AVIATION COMPONENT REPAIR SHOP FOR INSTALLATION IF INSERTS IN CFM56 ENGINE CASINGS. IT COMES AS IT IS SHOWN. IT HAD NOT BEEN USED SINCE THE SHOP CLOSED IN 2007. I PUT AIR TO IT AND IT ACTAUTED FINE. THESE ARE VERY EXPENSIVE FROM NEW. HERE IS ONE FOR A DEAL. THANK YOU
|
|
|
STANLEY PNEUMATIC NUTRUNNER- L30LRATA-9. USED, REVERSE, IN GOOD CONDITION, PLEAE LOOK AT THE PHOTO. I COMBINE SHIPPING.
|
|
|
STANLEY- PNEUMATIC NUTRUNNER- LA40 LAM-13F2. 775 RPM 3/8" USED, I COMBINE SHIPPING.
|
|
Up for sale is a Chicago Pneumatic Mini High Speed Angle Die Grinder. Type RP9101. RPM 22500. Nice tool! On all air tools. Not just the ones I sell, make sure you have the air supply needed to power them. For decent power I recommend at the very least a 30 gallon tank and a 3/8 air hose. These revolving tools require a lot of air as they are constantly running full speed. Most of the problems people report to me on air tools come down to this! They will work with a smaller system but not at their best. Understand this when bidding please. I'm sure if you look hard enough you can find one cheaper but has it been tested on professional equipment and does it have a 30 day satisfaction guarantee? This one does! I stand behind what I sell. Returns are accepted! I'm happy to COMBINE SHIPPING ... morewith any of my other items. Check them out! A lot of stuff fits in a flat rate box. If you buy multiple items ask for an invoice BEFORE YOU PAY. I can almost always do better than what comes up automatically. Check my feedback and bid with confidence! Payment is expected within 4 days. I'm easy going if you communicate. I test each of these items before listing but I can't take them each to work for a week. If there is any issue please contact me before leaving feedback. Most likely we can work it out! My customers satisfaction and my standing with ebay are extremely important to me! I'm not happy until you are! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e0ad88249-0xf4-
|
|
|
STANLEY-NUTRUNNER- A32LA1CT-51P1- 510 RPM 3/8" IN GOOD CONDITION. I COMBINE SHIPPING.
|
|
|
STANLEY- NUTRUNNER- A40 LAT- 725 RPM- 3/8" RT ANGLE- GOOD CONDITION, I COMBINE SHIPPING.
|
|
Description:HEAT GUN.ELECTRICDetail:AN ELECTRICALLY DRIVEN PISTOL-SHAPED DEVICE, NORMALLY HAND-HELD, USED TO DELIVER HOT AIR IN EXCESS OF 100 DEGREES CELSIUS FOR DRYING, CURING, FORMING, ACTIVATING, SOFTENING, SHRINKING, AND THE LIKE. THE OPERATING PARTS ARE USUALLY HOUSED IN A PROTECTIVE INCLOSURE. IT MAY INCLUDE AIR FLOW DIRECTING ACCESSORIES AND A MEANS TO HANG THE ITEM. EXCLUDES DRIER, ELECTRIC, HAND. Manufacturer Information:HT-71002 OLIVE DRAB 0FN27 HAPCO INC. DBA TARPCO Techincal Specification:SPECIAL FEATURES OLIVE DRAB CASE; 10 AMP; VARIABLE TEMPERATURE; PRODUCES HOT AIR TEMPERATURES UP TO 950 DEGREES F; UTILIZES COMPRESSED AIR OR NITROGEN PASSING THROUGH A HIGH RESISTANCE ELECTRIC HEAT ELEMENT AND IS DIRECTED OR DIFFUSED THROUGH VARIOUS TYPES OF SPECIAL PURPOSE NOZZLE ATTACHMENTS; ... moreUSED TO HEAT SHRINK TUBING, SOLDER SLEEVE, ELECTRICAL CONNECTORS, DRYING AND CURING APPLICATIONS; FIBERGLASS AND ALUMINUM CARRYING CASE; 50HZ TO 400HZ RANGE III PART NAME ASSIGNED BY CONTROLLING AGENCY HOT AIR TOOL VOLTAGE IN VOLTS 115.0 FREQUENCY IN HERTZ 60.0 TEMP RATING 950.0 DEG FAHRENHEIT MAXIMUM CURRENT TYPE AC- I bought this at an auction and was told it had never been used. Do not know how to test myself so listing as used.
|
|
WarnerSales Warner See all my listings: WarnerSales PNEUMATIC SPIN THREADED BLIND INSERT TOOL GUN 1/4" X 20 FORWARD REVERSE Offered is a USED Pneumatic Threaded Blind Insert Tool. Description: Rocker trigger for forward and reverse. 1/4" x 20. Comes with a bag of inserts and a drill bit. This item is in good USED working condition. FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of ... morepurchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International customers are responsible for all applicable import duties and fees. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. Return Policy: You may return an item(other than an as is item) within 14 days of delivery for a full refund of the purchase price following our receipt of the returned item in the same condition it was in when sold. We will pay return shipping costs if the reason for the return is an error
|
|
|
STANLEY PNEUMATIC NUTRUNNER- A30LRA-5F2. REVERSE- 360 RPM 3/8" USED IN GOOD CONDITION
|
|
|
STANLEY PNEUMATIC NUTRUNNER- A30LRA-5-F3. REVERSE- USED, GOOD CONDITION. PLEASE LOOK AT THE PHOTO, I COMBINE SHIPPING.
|
|
Stanley Bostitch SC7 C-Ring Closing Tool Hog Ringer Very Nice Manufacturer: Stanley Bostitch Stanley Bostitch Item Number: SC7 DESCRIPTION/ SPECS: Used only a few times and guaranteed to work perfectly This is for the complete tool only as shown No manual or rings included Closes a 3/4" C-Ring to 5/16" Balanced. Lightweight, ergonomically designed Easy-to-load anti back-up magazine Can be easily converted to right or left hand operation Magazine holds 125 C-Rings Uses RING15100P C-Rings CONDITION: Excellent to Like New INCLUDES: Item(s) described above and exactly what's pictured Just a Few Simple Notes on Shipping and Other Questions Below"Free Shipping" includes Best Offers even though eBay shows(shipping not included) when making offer. Shipping charges will only ... morebe added if you choose to upgrade to a faster delivery method. We use U.S. Postal Service or UPS depending on size and weight of order. Regardless of what carrier eBay shows. This item packed and ready to ship is estimated at"5 Pounds. 0 Ounces. We ship all orders within 24 hours excluding weekends and holidays. Please do not hesitate to Contact Us with any questions about this item. Simply use this link or give us a call at 636-337-5305. We handle emails and phone calls in a timely manner. 8am-5pm Central Time, Mon-Fri. If you would like to add us to Your Favorite Sellers simply%2Fcgi.ebay.com%2Fws%2FeBayISAPI.dll%3FViewItem%26item%3D220195294319&ssPageName=STRK:MEFS:ADDVI" Click Here To see all of our items. You can or choose a category on the left of this page. You can also use the Store Search feature around the middle of the page. Thanks for your interest and we are looking forward to doing business with you. Powered by
|
|
|
ATLAS COPCO- PNEUMATIC NUTRUNNER- 3/8" 40 NM- LTV 37. LABEL WORN OFF. GOOD CONDITION, I COMBINE SHIPPING.
|
|
|
Pneumatic Screwdriver You are bidding on one Demag Minimat Ultra Pneumatic Screwdriver. Model 343-528U. Item is used, with some cosmetic wear(including scratches and scrapes) that will not affect the unit's function. Shipping: Free shipping represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and business's We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
STANLEY- PNEUMATIC NUTRUNNER- A-32LRAACT 7S2. 700 RPM. USED GOOD CONDITION. PLEASE LOOK AT THE PHOTOS, I COMBINE SHIPPING.
|
|
US Airtool 17-3XSP- 3/16 RIVET CAPACITY USATCO RIVETING HAMMER* Click on Images for larger view* Here is an Excellent Condition. Fully working US Airtool Model 17-3XSP- 3/16 RIVET CAPACITY USATCO RIVETING HAMMER. Sells new for $465.00! Shipping Weight: 5 lbs SHIPPING OPTIONS: WINNING BIDDERS WELCOME TO PICKUP. Click HERE for directions. We use UPS for the United States and Canada. We use US Postal Service for Canada and other International Destinations. Email Us for a quote if the shipping calculator does not work for your country. Add Me to Your My eBay Favorite Sellers List For questions concerning your payment. Please call(619) 563-5655. Monday thru Friday 9:30am to 4:30pm PST) Get your questions in early. Thanks much and Good Luck! This auction carries a 14(fourteen) day inspection. Simply ... morecall or email for return refund"GUARANTEE" at full purchase price. Minus shipping cost. Products that have been subjected to misuse, abuse, alteration, neglect or unauthorized repair, additions, improvements, attachment shall be deemed to be a waiver of product warranty by buyer and shall render this warranty null and void. All items are used unless otherwise noted. By placing a bid on this item. You agree to the following Terms and Conditions: Payment must be RECEIVED within 7 days of the auction's closing date. Payment MUST BE in US FUNDS. We will do our very best to ensure that your eBay purchase experience with us is a pleasant one. If any problems should arise. Please let us know Prior to leaving Feedback so that we may try to resolve the problem. You may call us at(619) 563-5655 or use the"Ask Seller a Question" link at the bottom of the page Items shipped via UPS include insurance. For all other shipping methods. Insur
|
|
THIS IS A INGERSOLL RAND NEEDLE SCALER COMES AS SHOWN LOOKS IN GOOD CONDITION. ^. Shipping on this item is 24.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is ... moreaccepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item15.
|
|
|
Rebuilt Pneumatic Rivet Buster by Atlas Copco + 2 Chisels Model: TEX-1133 BPM: 950 Length: 22 1/2" Bore and Stroke: 1 3/16" X 11" Air Consumption: 44 CFM Air Inlet Diameter: 1/2" NPT Chuck Size: 11X Jumbo This tool has been completely rebuilt by a professional air tool mechanic. It will come with new upper and lower sleeves and new bumber as well as retainer with sping and 2 surplus jumbo bits.
|
|
CLECO B1 C PNEUMATIC CHIPPER SCALER This auction is for a CLECO B1-C PNEUMATIC CHIPPER SCALER. This heavy duty item is sold in good working condition. Please e-mail for questions. Bid with confidence and Good Luck! SHIPPING/HANDLING and PAYMENT TERMS: I ACCEPT PAYMENT VIA PAYPAL US buyer pays $ 25.00 for shipping and handling via USPS Priority Mail which includes USPS Delivery Confirmation. Payment must be received within 5 days of auction close. I accept payment via PayPal. International pays actual cost according to country plus $3 handling. Payment via PayPal in US dollars. Will ship via USPS Priority Mail International upon receipt of payment. I DO NOT SHIP TO ITALY. All Customs Fees are the responsibility of the buyer and the specified value will be the ending auction price. Thanks for ... morelooking and check out my other auctions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DRDT-2 Experimental Aero Dimpler flush rivet aircraft quality tool- must see! Okay experimental aircraft builders. Here is a must have. This is quality all the way. You know the accuracy and safety this unit can add to your project while doing thousands of rivets. Unit is AS NEW! Feel free to ask questions. Winning bidder pay for shipment. I package secure and safe. Provide tracking number upon drop off for delivery. More information can be obtained from the manufacturer. ExperimentalAero 12351 E. Lou Bock Pl. Tucson. AZ 85749 See my FEEDBACK. Good luck fellow Ebayers! Thanks- 1965vettes.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e34e22e39-0xf2-
|
|
|
Check out my! ON THE AUCTION BLOCK TODAY 7 COMPLETE SETS OF MILTON P STYLE#1805 AIR HOSE FITTINGS THESE ITEMS ARE ALL IN GOOD SHAPE AND READY TO USE THEY ALSO COME WITH EXTRA PARTS THESE ITEMS AR BEING SOLD AS IS THANKS FOR LOOKING Be sure to add me to your! Check out my!
|
|
Snap On Orange Pistol Grip Screwdriver SSDMRE4 Aviation Tool Exc Cond This is an orange Snap On pistol grip screwdriver. In very lightly used condition.The Boeing part# has been sanded off, otherwise this tool is unused. It works perfectly, everything is smooth, the ratchet is fine. My tools are used. Clean, aircraft quality tools in very good to excellent condition, many of them brand new. Nothing broken, chipped or abused, unless it's indicated) I try to show any flaws in the photos and description. If you're experience with us isn't as you expected you have 7 days to return the item for a full refund unless stated otherwise. I leave feedback as soon as I know that you've recieved the item and are happy with it. Feedback is important to me. I always leave it. Expedited 1-3 ... moreday shipping. I try to ship the same day after payment at the latest. There is always a tracking number. However the tracking number stops at international borders. I gladly ship overseas but can't guarantee shipping past our border. I've never had a failed shipment but delays happen out of my control. Free shipping anywhere in the USA. $23.45 shipping worldwide. Shop my store for more items. I gladly combine shipping wherever possible. Put me on your favorites list and check back for new items. Questions about an item? 253-736- 5811 Thanks. Dave Wood
|
|
Untitled Document For Sale- 1 Lot of AMCO USA. APEX, and SNAP-ON TORX PLUS POWER BITS AND INSERT BITS IN VARIOUS SIZES. Some new and some used. At a minimum all items are very good. All bits"Made in the USA" Includes: 13 15 IP AMCO USA TORX PLUS 50 mm power bits. 2 APEX 15 IP 90 mm TORX PLUS power bits. 1 APEX 30 IP TORX PLUS 70 mm power bit. 2 AMCO USA 15 IP TORX PLUS 70 mm power bits. 3 AMCO USA 25 IP TORX PLUS 50 mm power bits. 1 AMCO 30 IP TORX PLUS 50 mm power bits. 1 AMCO 20 IP TORX PLUS 50 mm power bits. 2 APEX TORX PLUS 15 IP insert bits. 1 SNAP ON TORX PLUS 15 IP insert bit Payment is via Paypal only. And I expect payment no later than 24 hrs after the auction ends. Your Paypal account must have a confirmed address. This is an As-Is Final sale, however, I Guarantee the item ... moreyou will receive will be the one I have photographed and is as described. Shipping is 10 dollars anywhere in the continental USA. Thanks for looking. PLEASE NOTE: There are 7 high resolution images that follow. Please give them time to load.
|
|
Diamond Wright Type 31 Pneumatic Anchor Machine. Good cosmetic condition. Scuffs and scratches. Some surface rust. Wh ich seems to be pretty common with water system tools. But n o major damage that I noticed. Includes all that is shown. Tested the tool it self. Seemed to be working properl y. Unable to test water system/fully test tool, Guaranteed functional. If you have any questions feel free to ask. Please check out our other auctions. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company ... moreor collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. SquareTrade © squaretrade warranty v2.0
|
|
|
STANLEY- NUTRUNNER- LA30LA 15 F2. 1200 RPM, 3/8" USED GOOD CONDITION, I COMBINE SHIPPING,
|
|
|
Cleco Model 8RSA7BQ Professional Pneumatic screwdriver. Very good visual condition(surface scratches and gold band sticker is peeling) and excellent working condition. Made in the USA. Top quality air tool. Retails new for $975-$1000. Ships 1 business day after payment received. Feel free to make an offer!
|
|
|
FIAM 450 RPM Pneumatic Nutrunner Screw Gun Driver Drill CY11RAM-WP From a closed business the drills I'm selling were removed from service and good working order. No manuals or tooling found. app. 14 inch long
|
|
The Huck 225/245 Installation Tool is a lightweight. High speed production tool designed to install a large variety of Huck Blind Fasteners and HUCKBOLT Fasteners. The pull and return action of the 225/245 Installation Tool is provided by a pneumatic-hydraulic(pneudraulic) intensifier system which is powered by 90-100 P.S.I. of air pressure. This powerful tool can pull Huck C6L HUCKBOLTS and Magnagrip Blind Fasteners as used in truck and trailer repair and industrial fabrication and assembly processes. This Pneudraulic Installation Tool has the capacity to install fasteners that a Huck 352 won’t and uses all nose assemblies compatible with Huck 226/353/246/256 Installation Tools. This tool is used but fully functional and ready to work, comes complete with air swivel assembly, air regulator ... moreand nose assembly retainer nut. Call 204-837-8361 or email info@applifast.com for more information. Specifications: Weight(as shown without nose assembly) 9.30 lbs/4.2 kg Stroke: 5/8” 0.625” Overall height: 14.62” 371 mm) Air pressure required: 90– 100 P.S.I. Air consumption: 20 CFM(based on 30 fastener installations per minute)
|
|
Lot of 5 Atlas Copco Pencil Type Air Powered Driver ITEM DETAILS, Manufacturer: Atlas Copco Model: Pencil Type Air Powered Driver Air Powered Bit Driver Item Details Specifications: Overall Physical Condition: In good condition. Works as designed. Notes: Each lot of 5 may consist of various brands. Including. But not limited to Atlas Copco. Pulled from a working corporate environment. The five shown in the images are representative of the five that you are bidding on. Does not include any additional parts. Cables, or documentation. auctionpartner274-0067635 kris A12B Payment& Shipping Information, Liquis accepts Pursuant to eBay's payment policies. Liquis can only accept electronic forms of payment. Payments must be made via Paypal or credit card. W- 30 lbs. w- 30 All items must be ... morepicked up or shipped out within 15 days of purchase from Liquis Warehouse or it will revert to becoming the property of Liquis. Any items that are not picked up within 7 days will have warehouse storage fees added on to the handling fees. UPS Ground Shipping& Handling Charge in USA: $46.00[UPS Worldwide Expedited] International Shipping to U.K. and Canada only. Combined Shipping, We do offer the option to combine ship multiple auctions for a lower shipping cost. Send an e-mail when you've completed your purchase. Please include all auction numbers for reference. The rate for combined shipping is FULL price on the heaviest item. All items after that are half shipping price as long as they fit into the same box. Note: We do NOT offer combine shipping on PC' s or Desktop LCD Monitors. Our offices are open from 10:00AM-3:00PM Central Time Tuesday Through Thursday. We are closed on the weekends. Please allow 1-3 business days to reply to all e-mails. Local Pickup Fee Handling Rates, Weight First Item Each Additional Item 0-5lbs $9 $5 5-40lbs $12 $6 41-75lbs $25 $12 All PCs And Servers $20 $20 All PC LCDs(15"21" $12 $6 Items Over 75 lbs. Local Pickup Fee Rates only apply if the buyer is picking up the items in p
|
|
|
INGERSOLL RAND screw gun. Chuck size: 1/4" Not sure on part no. Was used at the WELLCRAFT boat building plant in mid 80's. I have not used it very much. Used in good working conditon. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Nice Dotco 90 Degree Angle Drill 1/4"x28 Thread MD# 15LF283-62/ 3300RMP MD# 15LF283-42, 3300RPM, 1/4" x 28 Thread, Condition Made in USA Nice conditionm has some primer spots on the tool as shown in the pictures Good running. No wobble Shipping Shipping costs include shipping through USPS Priority Mail and Confirmation Number We do combine shipping We only ship to the lower 48 states of the United States No International Bidding Payment PayPal is preferred. We do not accept personal checks Cash is accepted when requesting a local pick-up PLEASE make payments within 7 days of auction close! Returns We will accept returns 7 days after you receive your order We will offer a full refund after we have received your item. Feedback Please take a short moment to give a positive feedback ... moreafter successfully receiving orders We will return the favor Thank you for your business! BID WITH CONFIDENCE! CHECK OUT MY FEEDBACK RATING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e60729bcc-0x105-
|
|
|
For auction is a lightly used Dynabrade Dynorbital 10.000 RPM Random Orbital Sander P/N 56008. Includes vacuum hose filter and bag as pictured. No pad is included. just what is pictured.
|
|
|
Aircraft Nibblers JILSON J-1251 Good used condition
|
|
THIS AUCTION IS FOR A CLECO AIR TOOL MADE IN THE USA MODEL:220GL STOCK#L6487D PLEASE READ ALL OUR POLICIES BEFORE BIDDING ON OUR ITEMS. WHO WE ARE Jet_Pawn is a family owned multi location Pawn Shop company located in the Houston Texas area. WHAT WE SELL Unless otherwise specified all items we list will be in some stage of used condition. We will do our best to test and list items accurately. Although we do our best there is always the possibility that our idea of very good may be the customers idea of good or the item just does not meet the buyers expectations. We feel that there is a bit of risk that needs to be taken by the buyer when purchasing used items. If for any reason you are not satisfied please contact us for help before leaving feedback. I can not help if I do get the opportunity. ... moreCOMMUNICATION POLICY All our Ebay business is done by one person. I do not work seven days a week and normally do not sit next to the computer staring at the ebay inbox waiting for emails on my days off. I will always answer questions but there is the possibility that it may take a day or even longer once in a while. Please be patient and you questions will be answered. CUSTOMER SATISFACTION GUARANTY Every item we sell comes with a money back Guaranty. PLEASE before leaving feedback if for any reason you are not satisfied contact us so we can take care of you in a manner reflective of the way I do business. SHIPPING POLICY We ship USPS Priority or Fedex ground depending on the item. As with the communication policy I do not work every day so there is a possibility your item may not ship the same day you pay. Under normal circumstances all items will ship within three business days of the day of payment. Due to Ebay/paypals newly implemented money hold policies we are no longer doing any international shipping. No exceptions. EBAY FEEDBACK AND DETAILED SELLER POLICIES Ebay's feedback policy is currently set so that buyers have an incredible amount of power over a sellers ability to list. A one day history buyer can leave
|
|
You are bidding on(1) Chicago Pneumatic CP-OY Rivet Gun#H526667- there are no other mfg markings on the gun with reference to RPM's etc. The rivet gun comes with the following: 1) beehive retainer sprng(1) 3/32" straight overall length 5 1/2" 1) 1/8" straight overall length 5 1/2" 1) 5/32" straight overall length 3 1/2" 1) 3/16" straight overall length 3 1/2" 1) offset flush- this is an altered tip- nice flush surface(1) 3 1/2" flush There are engravings on the body of the rivet gun. All items are being sold as USED aerospace industry surplus- has been cleaned and tested- found to be in great working order. Thanks for looking. I do combine shipping! International buyers- USPS is the ONLY shipping option- please email for shipping costs prior ... moreto bidding. Paypal is the ONLY form of payment accepted. I usually am in contact with the buyer within the first 24 hours- if you do not hear from me. Please feel free to email me. I do need to hear from you within 3 days of the end of the auction. I ship every day and prefer USPS or UPS Ground(US ONLY) I do NOT have access to Fed EX. In most cases. I will give you the options for shipping- the charges will be actual with no handling fees attached. I do expect payment within 10 days. If I don't receive payment within the 10 days. I will email you using the eBay invoice option to check the status and your intentions to complete the auction. If I do NOT get a response with 48 hours of that email- I will relist the item and begin the Non-Paying Buyer Process. Insurance on your purchase is entirely up to you. I have been known to over pack the items- I do take protecting your purchase very serious. If your purchase is NOT insured and it is lost or stolen- I can not be responsible. If an item is grossly misrepresented- I will work with the buyer to resolve the misrepresentation. I always leave feedback- usually within the month of the purchase. I"always" combine shipping and offer the most reasonable
|
|
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Air Compressor by SPEEDAIRE. 5 hp Briggs& Stratton Motor Gas Powered Item Description: This is a Air Compressor by SPEEDAIRE. Comes w/5hp Briggs& Stratton ... moremotor. Gas powered, Portable Note Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This item is located in Easton. MD 21601 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33114) nbsp, nbsp, Model: 3Z869C 1, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Color: Green, nbsp, nbsp, Condition: This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. We can not verify operational status. May need service and/or parts to make fully operational. nbsp, nbsp, Pickup Logistics and Handling: No loading dock or forklifts are available at this site. Buyer will be responsible for all equipme
|
|
|
LOT OF 3 TOOLS/ JIGS USED IN AIRCRAFT WORK AS THESE CAME FROM AN ESTATE OF AN AIRCRAFT MECHANIC THANK YOU 1 MAGNAVON# 2858-31-28 1 GEORGE A. TERRY NO.4 1 MISC TOOL
|
|
I AM OFFERING FOR SELL TODAY A DANIELS MFG. CORP. AVIATION REMOVAL TOOL#DRK 110-1A. IT ALSO HAS THE NUMBERS M81969\30-20 AND HAS THE NUMBER CR40 ETCHED IN THE BASE OF THE HANDLE. IT APPEARS TO BE IN GOOD CONDITION AND MEASURES ABOUT 4" LONG. THESE ARE VERY EXPENSIVE TOOLS. SO THIS IS A VERY GOOD BUY ON THEM. I AM NOT AN AIRCRAFT MECHANIC SO I CAN'T MAKE ANY GUARANTEES OF PERFECT WORKING CONDITION. SHIPPING PRICE INCLUDES INSURANCE AND IS FOR CONTIGUOUS 48 U.S. STATES ONLY, ALL OTHERS WILL BE DETERMINED BY BUYER'S LOCATION. I DO NOT SHIP INTERNATIONALLY, SO PLEASE DON'T BID ON THIS ITEM IF YOU DON'T HAVE A VERIFIED U.S. ADDRESS THIS ITEM CAN BE SHIPPED TO. PLEASE CONTACT ME WITH ANY QUESTIONS BEFORE BIDDING AS THERE IARE NO RETURNS ON THIS ITEM, AND AS ALWAYS GOOD LUCK ... moreAND GOOD SHOPPING!
|
|
|
This riveter works great. It was just bled. It is in great physical condition. It will pull many different fasteners including Peterbilt rivets with the correct nose piece. This riveter comes with an offset lock bolt head. Made in the USA by Huck.
|
|
|
Product Features Up to 5000 lbs of closing force, Made of Aluminum, CFM@ 30 Strokes min=0.20 CU ft, Product Description. The most powerful series of power packs. Ergonomically designed portable hand cutters. These tools eliminate the need for messy hydraulic hand tools. These cutting and degating tools feature a two stage air cylinder design. Easily held by hand, these power packs can also use a tool balancer or bench stand mounting brackets. Simonds pneumatic squeeze pliers model SP-008. Pliers/Crimpers are in great condition. Only used once or twice. Original list Price on this unit was $1325.06 WITHOUT ANY Attachment heads. Buy With Complete Confidence. Thank You For Looking. Posted with
|
|
|
SNAP-ON Old Garage Service Station Vintage Valve Tool This is a used Snap On valve tappet adjusting tool. That is part#V-21-B and it measures approximately 6 1/8" long. This Snap-On V-21-B valve clearance adjusting tool is marked with"Snap-On" and"Pat No. 1544520" forged into the handle, and with"Made in U.S.A. stamped near the end of the handle. The handle length is 6.0 inches, and the knob has a diameter of 2.7 inches. The finish is chrome plating. This is from the net: Patent#1,544,520, issued to E.P. Putrow in 1925. Snap-on first offered this tool in 1927. By 1933 the valve tool set had become model V-21. This tool may or may not work but I know all Snap-On tools carry a guarantee for life. Powered by
|
|
This auction is for an AWESOME Atlas Copco Model LBB34 Pneumatic/Air Drill Motor. PHOTOS OF ACTUAL DRILL(4474) LBB34 6.000 rpm. You get a CHOICE of CHUCKS with this auction. The Industrial Jacobs Chuck OR the Magnavon Q/C Chuck! This tool is made in Sweden and retails for over $800 new. This is no cheapie by any means. Its scratched up somewhat which is what painted drills do. BUT runs Perfect. About the size of a Dotco or Sioux palm drill which is pretty small. These drills are Very quiet. Smooth running drills and are built to handle commercial use. PERFECT RUNNING CONDITION. I have personally gone through this tool and made sure it is in Perfect order. Some listings on ebay have countersink cages. Drills, etc listed as a group to lure in more bids. If you would like those items please contact ... moreme for a pkg deal. Thank you. FREE SHIPPING IN THE US. INTERNATIONAL Priority SHIPPING WILL BE DISCOUNTED TO MAKE IT FAIR. Dont forget to check out our other aviation related auctions including aircraft tools. Thanks Check out my! Be sure to add me to your!
|
|
|
up for auction.this quality Master power air chisel.works great.superior quality tool.u wont go wrong.this is professionals tool.thanks for looking.sc ps.model 5164.type1.cooper power tools.
|
|
|
This is a JIFFY OFFSET PANCAKE DRILL very nice tool dont miss out on it
|
|
|
Used coolind system refiller. Has a small crack in side of guage, but works fine, sale is final, please ask questione befor you buy
|
|
|
Open package but appears new. Purolator Facet Inc. FAA-PMA Part No. 1741175. Indicator Test Element. Thanks.
|
|
Cleco Adjustable Clutch Pneumatic Right Angle Tool 14RAA04AM2 Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Make: Cleco Model: 14raa04am2 Condition: Used/Lightly Used- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Tool only. Guarantee: 30 Day satisfaction guarantee 136057.1 1358 KH Order: 20029 We are only able to accept PayPal payments it's secure and offers the most protection to buyers and sellers alike. PayPal also gives you the flexibility to pay with your checking account. Debit, or credit cards. Payment is expected within 8 days. Sales tax must be collected for all Texas. Tennessee, Illinois, ... moreWashington, Nevada, and Florida buyers. We are unable to accept orders from resellers. We can only ship to addresses in the contiguous US(48 states) This item will be shipped via UPS ground. Shipments will only be made to confirmed PayPal addresses. Our goal is to ship within 24 hours of PayPal receipt of payment. And we guarantee it will leave our store within 2 business days. Insurance and delivery confirmation is included for all items and is calculated into the shipping charge. Shipping time with UPS ground is generally 2-6 business days, we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's expense, so please email any special requests, and we'll try to get you a quote within 24 hours. We currently ship from multiple locations in the states of Texas, Tennessee, Illinois, Washington, Nevada, and Florida. We can sometimes combine shipping and reduce the rate if you win items from the same location. Please see the three to four digit store identifier at the bottom of the description, and email prior to auction end for a quote on reduced shipping. We will do the best to accurately describe the item in the listing. Please feel free to email an
|
|
|
Description You are bidding on one(1) used A.B. Quackenbush Pneumatic air tool. There is no tag in the air tool to identify the model. Condition Item is used; works fine. Shipping& Handling I can ship USPS or FedEx Ground. Buyer pays $13.97 shipping and handling(shipped in 48 States) I accept Paypal. Tax Louisiana residents will be charged a 4% sales tax. id: 18
|
|
|
This is a Ingersoll Rand mini industrial quality aircraft screw gun. It uses standard 1/4" apex bits. It turns at 1650 RPM's. It has a adjustable clutch and it is reversible.Made in the USA! Very light with a great feathering trigger.
|
|
|
This is a Ingersoll Rand model 3RTMS1 mini industrial quality aircraft screw gun. It uses standard 1/4" apex bits. It turns at 1650 RPM's. It has a adjustable clutch and it is reversible.Made in the USA! Very light with a great feathering trigger.
|
|
|
Up for sale 2 really nice countersink cages. I am retiring from aviation sheet metal and no longer need them. The large one takes 7/16 x 20 threaded cutters. The smaller cage takes.250 by 28 threaded cutters. Both cages have needle bearings making for smooth operation.
|
|
BLUE POINT AT187 PNEUMATIC ENGRAVING PEN Item is used Was tested and works great However looks like hose need to be replaced soon(now isn't leaking) Comes with everything shown in pictures. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship ... morewithin 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concearns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
|
|
|
Anyone need an air tamper? This is an Ingersoll Rand Model# 441. Its in great shape. Nothing broken or bent. Great for tamping areas that are hard to get. With a larger tamper. Takes larger compressor to operate. Email questions. Shipping charges will be determined after purchase, but you will pay ONLY actual shipping cost. If you have a business account, it may be cheaper for you to have your carrier pick up. I will not charge to build a little crate for it, if you prefer. Thanks for looking. I don't know why it gives a cost in shipping. Disregard.Shipping to be determined after purchased.
|
|
|
TO SKYNON'S TOOLS! THIS IS A PREVIOUSLY USED AIR ROUTER BY MASTER POWER 4921 TYPE 1 23.000 RPM ROUTER WITH FINE THREAD ADJUSTMENT AND FRONT EXHAUST MISSING LOCK NUT. USED CONDITION. AS PICTURED! NO RESERVE! WE ALWAYS HAVE SEVERAL AUCTIONS RUNNING WITH QUALITY NAME BRAND TOOLS.CHECK THEM OUT!
|
|
|
AIRETOOL ROLLING EXPANDER MODEL 1050 ITEM IS IN GOOD WORKING CONDITION. I DO HAVE A QUICK CONNECT AIR NOZEL ATTACHED. NO OTHER HOSES. MANUALS COME WITH THIS ITEM. ITEM IS BEING SOLD AS IS* PLEASE FEEL FREE TO CONTACT ME IF YOU HAVE ANY ADDITIONAL QUESTIONS OR CONCERNS. WINNING BIDDERS: PLEASE NOTE ITEM MUST BE PAID IN FULL NO LATER THEN 3 BUSINESS DAYS AFTER AUCTION HAS ENDED. HAPPY BIDDING*
|
|
|
Cleco Pneumatic Fastener Gun Model W500-30 Used. But i n great working order Model W500-30(stock#06) Any Questions. Please call Steve at 316-761-2382
|
|
|
Pneumatic Drill with Buckeye 90 Degree 1/4"28 Head Used. But i n great working order Has a 1/4" 28 Threaded Head which uses standard 1/4 inch drill bits(Stock#02) Any Questions. Please call Steve at 316-761-2382 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e8185dd97-0xf9-
|
|
|
This auction is for a used aircraft rivet shaver in good working order sold as is. This unit sells for $1.400 new:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e81a65f12-0xf2-
|
|
|
UP FOR BID IS A CHICAGO PNEUMATIC 1/4" DRIVE HEX HEAD REVERSIBLE PISTOL GRIP SCREWDRIVER#CP-2615-9. THE TOOL IS IN GOOD WORKING CONDITION.
|
|
|
UP FOR BID ARE 2 INGERSOLL-RAND 3RLNM2C5 PNEUMATIC NUTRUNNERS. THEY ARE STAMPED 1100 RPM. ONE OF THE TOOLS HAS A REMOVABLE SOFT GRIP. THE TOOLS ARE IN GOOD WORKING CONDITION.
|
|
Offering savings to eBay shoppers! Sioux Pistol Grip Air Drill- Model# 1451ESBR USED CONDITION W/BIT I have tried to research this particular model and have found very little. So I do not know much about it other than condition. CONDITION: PISTOL GRIP HANDLE CAST IRON RED PAINT HEAVY SCRATCHES IN THE PAINT AIR CONNECTOR IS IN GOOD SHAPE HAS BEEN CONNECTED TO AIR DOES WORK HEAD IS IN GOOD SHAPE NOT ALL CHEWED/BEAT UP BUT IS HEAVILY SCRATCHED LITTLE DIRT. NO RUST TRIGGER IS GOOD NOT BROKEN COMES WITH 1 BIT IN GOOD CONDITION ON THE HANDLE IT IS STAMPED SIOUX TOOLS INC. MADE IN USA. MODEL 1452ESBR. RPM 1200. SER# AND ID 032149 DRILL HEAD IS 1.5-13MM CAP We are a Buy. Sell& Trade Store most generally our items are used/ pre-owned, and we test to the best of our ability, no warranties, and no ... moreguarantees We are open Mon-Sat closed Sun and all major Holidays. If you have any questions on any day we are closed we will get back to you the next open business day, shipping will only be done on open business days We accept PayPal Our goal is to ship within 1 business day of receipt of payment. We ship our items USPS. UPS, or FedEx. We find this is the most economical choice for our customers. Local Pick-Up is also accepted Ultimately. Your satisfaction is most important to us. If for any reason you are not happy with this item or find that it is not what has been described in this listing we will be happy to except returns within 14 days of purchase. Please note buyer will be responsible for return shipping. We strive to be the best in Customer Service. Quality, Feedback, and Shipping. Please feel free to contact us for any questions and/or concerns. We would like to hear from you and will get back to you as quickly as possible on any open business day. Thanks for visiting us. Good luck on your bidding, we look forward to hearing from you! Top Rated eBay seller: Used Resource On May-07-13 at 18:08:18 PDT. Seller added the following information:
|
|
Inventory Number: 12090045205 Manufacturer: Description: 3 CROW FOOT PNEUMATIC RATCHET WRENCH NUTRUNNERS. 21/32" 11/16" 1" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: 21/32" 1/4" NPT, ONE: 11/16" 1/4" NPT, ONE: 1" 3/8" NPT, ALL TESTED& WORK, RPM UNKNOWN, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us ... morewith a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned
|
|
Inventory Number: 12090045204 Manufacturer: Description: 3 CROW FOOT PNEUMATIC RATCHET WRENCH NUTRUNNERS. 12mm, 15mm, 1" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: 12mm, ONE: 15mm, ONE: 1" ALL HAVE 1/4" NPT, ALL TESTED& WORK, RPM UNKNOWN, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The ... moreinvoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have
|
|
Inventory Number: 12090045203 Manufacturer: Description: 2 PNEUMATIC 1/2" HEX IMPACT SCREW GUNS. INGERSOLL-RAND Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 2, TESTED& WORK, RPM UNKNOWN, BOTH HAVE 1/4" NPT, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need ... moreto notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell add
|
|
Inventory Number: 12090045201 Manufacturer: Description: PNEUMATIC 1/2" RATCHET WRENCH NUTRUNNER. 625-RPM, 1/4"NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, TESTED, WORKS, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of
|
|
Inventory Number: 12090045200 Manufacturer: Description: STANLEY 3/4" PNEUMATIC RATCHET WRENCH NUTRUNNER. 130-RPM, 1/4"NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, TESTED, WORKS, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of ... moreinvoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE p
|
|
|
im selling a Microstop Cage for countersinks. Its The long narrow body one great for getting into those hard to reach spots. Selling it cheap for 25 Dollars. Enjoy this product. I only used it a couple times as i already had ones set up for my 40. 30, 21, 10 and only used this one if i needed to to keep it nice.
|
|
|
The air hammer is used and shows wear as you can see in the pictures. The aluminum housing has a hairline crack in the top but the hammer still works good. Shipping international will be additional cost.
|
|
|
RIVET SHAVER IN VERY GOOD CONDITION.KEY WORDS: DOTCO RIVET GUN C SQUEEZE BUCKING BARS COUNTERSINKS DRILL MOTOR ANGLE DRILL CHICAGO PNEUMATIC ATLAS COPCO US TOOL AIR TOOL CHERRY MAX HUCK GUN JIFFY DRILL GRINDER AIRCRAFT TOOLS RIVET SETS CLECO CLECOS SIOUX COOPER ALLIGATOR. PREVIOUS OWNER MARKINGS
|
|
|
DOTCO 360 DEGREE DRILL MOTOR FOR ALL YOUR TO GET TO SPOTS THIS IS 3370 RPM MOTOR WITH LOTS OF POWER.KEY WORDS: DOTCO RIVET GUN C SQUEEZE BUCKING BARS COUNTERSINKS DRILL MOTOR ANGLE DRILL CHICAGO PNEUMATIC ATLAS COPCO US TOOL AIR TOOL CHERRY MAX HUCK GUN JIFFY DRILL GRINDER AIRCRAFT TOOLS RIVET SETS CLECO CLECOS SIOUX COOPER ALLIGATOR. PREVIOUS OWNER MARKINGS
|
|
|
AIRCRAFT RIVET SQUEEZE ATLANTIC AIR TOOL MODEL 60 A IN GOOD CONDITION. KEY WORDS: DOTCO RIVET GUN C SQUEEZE BUCKING BARS COUNTERSINKS DRILL MOTOR ANGLE DRILL CHICAGO PNEUMATIC ATLAS COPCO US TOOL AIR TOOL CHERRY MAX HUCK GUN JIFFY DRILL GRINDER AIRCRAFT TOOLS RIVET SETS CLECO CLECOS SIOUX COOPER ALLIGATOR. PREVIOUS OWNER MARKINGS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e8e954c57-0x100-
|
|
AUCTION INCLUDES AIRCRAFT SAFETY TWIST PLIERS: BLUE-POINT WT11B. ~9 INCHES LONG* BLUE-POINT GA311C. 10-1/2 INCHES LONG INITIALS HAVE BEEN REMOVED. PLEASE ASK ANY QUESTIONS BEFORE BIDDING. WINNING BIDDER MUST CONTACT US WITHIN 3 DAYS OF AUCTION CLOSING. PAYMENT IS EXPECTED WITHIN 7 DAYS. Pictures are of the actual item. No accessories or manuals included unless otherwise pictured. All items are sold-as-is. We are surplus equipment dealers and do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best we can. TOOLS ARE SOLD AS IS. ALL OUR TOOLS ARE SURPLUS ITEMS THAT WE PURCHASE FROM AUCTIONS THAT INCLUDE AEROSPACE. AVIATION, AIRCRAFT, AND AUTOMOTIVE TOOLS. SOME MAY HAVE MINOR SURFACE RUST, AS WELL AS MECHANICS NAMES ... moreOR MECHANICS NAMES MAY BE SCRAPED OFF. Be sure to add me to your! Check out my!
|
|
|
Nearly New.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e90b9d512-0x104-
|
|
|
MAC 3/8" drive hand impact has air regulator with whip model- AW 135 works
|
|
Jiffy Pneumatic 1/4"28 Threaded Pancake Offset Nutrunner Drill RD2 Description- Part Number: RD2- Manufacturer: Jiffy- Free Speed: 450 RPM- Thread Size: 1/4"28- Made in USA- We have tested this nutrunner and is 100% guaranteed to be working. Comes as pictured with some cosmetic wear(including engravings) 7660( JK)5/10/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate ... morethat in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with
|
|
|
This hydraulic hand crimp tool is used for crimping AMPLI BOND and TERMINYL terminals and splices. As well as AMPOWER pre-insulated terminals and splices.This crimp tool also performs the same functions as 59974-1. This tool can be calibrated. The tool is completely functional and is in MINT CONDITION! Manufacturer: AMP Tyco Condition: Used EXCELLENT! Was bought new for over $1000.00 I am including its original instructions. See pics for the actual item being offered.
|
|
Inventory Number: 12090045198 Manufacturer: Description: 3 CROW FOOT PNEUMATIC NUTRUNNERS. 15mm, 7/16" STANLEY, 1/4" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: TWO: 15mm, ONE: 7/16" AS SHOWN, SEE PICTURES, ALL TESTED& WORK BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and ... moreyou will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction ite
|
|
Inventory Number: 12090045196 Manufacturer: Description: 6 PNEUMATIC 1/4" HEX SCREWGUNS. SIOUS, INGERSOLL-RAND, 1/4" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 6, AS SHOWN, SEE PICTURES, ALL TESTED& WORK BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time ... moreof invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with F
|
|
|
Good condition Coats Wheel Balancer We have used it here in the warehouse for a few tires but have no reason to keep it. Don't buy it if you don't know how to use it! Unit may need to be calibrated for your shop! Call us for a shipping quote 804 262 3777
|
|
|
The tools are brand new. Never used! But the case is worn a little. My loss your gain. Retails for $100 new. So the tool is a 1/4in. roller ratchet, plus pieces to build a handle how you see fit. Posted with
|
|
|
This kit is made by Inovative Tooling Services. Was a great tool in open areas as well as tight spaces. Fits hi loks 5-8(1/4. 9/32, 5/16, 11/32, 3/8 and a 1/4in. Ratchet as well as set screwed sockets and an assortment of allens/and handle. Posted with
|
|
Alpha Polisher Welcome to our listing. Although we are getting started on eBay. Our main store has been eBaying for many years, please bid with confidence. You are bidding on Alpha polisher model AIR-658. I ran the unit on a compressor, sounds and runs fine, guaranteed to be in good working order. Shipping will be USPS Priority Mail. Thank you. Unless stated otherwise above. Everything in the photos and description is included. And all photographs are of the actual item being offered. Product stands used in photo displays are NOT included. Please ask any questions about this item PRIOR TO the end of the auction. SHIPPING CARRIERS UPS UPS does not deliver to P.O. Boxes or FPO/APOs. No exceptions. Please supply a PHYSICAL ADDRESS for delivery. Shipment to Hawaii. Alaska& U.S. Territories ... moreare subject to increased costs. All items over $250 must be shipped with Signature Delivery Confirmation. USPS ALL items shipped via U.S. Postal Service are shipped via First Class. Priority or Media Mail Services, each with Delivery Confirmation. Delivery time is 3-10 business days. IN-STORE PICKUP There is no charge to pick up your item locally. Please bring a VALID ID for confirmation and your EBAY ITEM NUMBER for the item you've won. North Carolina residents will be required to pay North Carolina Sales Tax upon pickup. Please contact us PRIOR TO leaving any neutral or negative feedback. we strive for high quality service and want you to be satisfied with your purchase from BUYSELLTRADEASHEVILLE— if you have ANY problems. Please email us through eBay or call us during regular business hours 1-828-254-1300.
|
|
|
Sioux pneumatic screw gun tested works great. Reversible, made in the USA Posted with
|
|
|
Your looking at a Dotco Right Angle Sander/Grinder. Its a Model: 12L2218-45 and is rated at 18.000 RPM. It has rear exhaust. This tool works perfectly with very little use. It has been very well cared for. Oiled and greased on a regular basis. It has very minor cosmetic wear and an engraving near the head(as seen in pics) This is the larger.6HP Dotco angle sander. Very Very powerful with tons of torque. You don't see this particular model available very often. I love this thing! Only selling because I own two of them. These sell new for $800.00. Please feel free to ask any questions prior to bidding! Good Luck and Happy Bidding!
|
|
SKU: UR958741 A: 0015000000mH0EB O: 0065000000MlVee PA: 0015000000kLkjs View Photo Gallery. Location: Phoenix. AZ 85043 Item Description. This is a no reserve 2007 Edco ALR-BS Big Stick Ergonomic Pneumatic Air Chisel Scaler auction for a in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View ... moreour industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Edco Model: ALR-BS Straight Year: 2007 Serial: 317708 Shipping Weight: 35 lbs Shipping Dimensions: 60" L x 12" W x 12" H Features/ Specifications: Blows per minute: 3500 Stroke: 1.595 inches(40.5 mm) Bore: 1.902 inches(48.3 mm) Air Flow Rate: 12-15 CFM@ 90 PSI Working Pressure: 80-90 PSI(5.5-6.2 Bar) 100 PSI max Noise Level During Operation: Exceeds 92 dB(A) 3/4-1" Hex Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Condition: Former rental unit in good overall condition Machines functions well overall Unit is in good overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, featu
|
|
|
SIOUX 1/4" 3600 RPM MINI AIR DRILL DR1412-THIS IS ONE OF SIOUX TOP OF THE LINE AIR DRILLS! THIS DRILL IS USED IN GOOD CONDITION AND WORKS GREAT! DONT LET THE APPEARANCE OF THIS DRILL MAKE YOU THINK OTHERWISE-JUST HAS SOME PAINT CHIPPING THAN CAN BE REPAINTED IF DESIRED-THIS DRILL IS VERY LIGHT. COMPACT, FAST AND SMOOTH! SIOUX MODEL 1412-RPM: 3600-WEIGHT: 1.50 POUNDS-SIZE: 1/4" CHUCK(key not included) LENGTH: 6" TRIGGER FEATHERS LIKE A DREAM! WEIGHS ONLY 1.50 POUNDS! MADE IN THE USA BY SIOUX WHICH IS A DIVISION OF SNAP ON TOOLS! COMES EXACTLY AS PICTURED GREAT BUY!
|
|
HI UP FOR AUCTION IS A AIMCO ERGO ARM IN GOOD CONDITION ONLY THING IS ONE OF THE PLASTIC FITTING NEED TO BE REPLACE FOR THE HOSE EVERY THING ELES IS IN GOOD CONDITION TO BE USED. ALSO COMES WITH THE ORIGINAL BOX. I only ship in the U.S and all sale are final No Returns. Please be sure before bidding on the aimco ergo arm, if you have any question please contact me on the aimco ergo arm and the aimco ergo arm is sold as is. I only accept paypal, also the item must be paid for at the end of the auction thank you. Also check out my other items for sale as well,Thank You and good luck bidding. CAPACITY 15 LBS MIN REACH 4" MAX REACH 33" WEIGHT 15 LBS Capacity 15 lbs, Capacity 15 lbs, Capacity 15 lbs, Accuracy Drive Type Free Speed RPM, Increments Length In, Length mm, Max Air Consumption ... moreAir Inlet(NPT) Min Torque ft lb, Max Torque 110 ft lb, Min Torque 110 in lb, Max Torque in lb, Min Torque in oz, Max Torque in oz, Min Torque kgf cm, Max Torque kgf cm, Capacity 15 lbs, Min Reach 4 in, Max Reach 33 in, Min Torque Nm, Max Torque 12 Nm, Maximum Reach In, Maximum Reach mm, Power Source Battery Model Reach Shank Size Sound Level Style Clutch Type Trigger Type Vertical Travel Ft, Vertical Travel mm, Weight 15 lb, Dimensions Diameter Square Drive Manufacturer AIMCO URYU
|
|
aims U.S.A! A.J. TOOLS PIT BULL PNEUMATIC AIR HAMMER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by A.J. Tools. This is a'Pit Bull' Pneumatic Air Hammer in very good condition. Features: Built in regulator for controlled torque. Includes 4 Chisels. Specifications: Air Inlet: 1/4" Min. Hose Size: 3/8" Overall Length: 7" approx. Comes as shown in pictures. Check out the ... morephotos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! A.J. TOOLS PIT BULL PNEUMATIC AIR HAMMER U.S.A! A.J. TOOLS PIT BULL PNEUMATIC AIR HAMMER Reliable Tool Inc. c 2011 | Powered by
|
|
Custom Chrome Gauge-Mounted Air Pump 0-30 lb. nucite Simple to operate and extremely accurate. Produces pressure of up to 200 psi by delivering 7 cubic inches of air per stroke. Ideal for setting the pressure on air forks. Air shocks or anti-dive fork components. Please ask any questions. We reserve the right to end this auction early as it is available at a retail location. Thanks! Payment Shipping We accept Paypal as well as credit cards. For quickest shipment Paypal is recommended. Checks will require a waiting period after it is received until after it clears. Your item will be shipped as soon as possible after payment is made. Most items will ship via Fedex Ground but we reserve the right to ship your order via other means. We can also ship items via air if requested. Please email us ... morefor that charge. 11323JS
|
|
S18 Make: Dotco Model: 15L2789 32 6200 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank ... moreCheck We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13ea39a8f2a-0xf5-
|
|
|
This item is has little wear but in great shape and great working condition with lots of life left!
|
|
Great condition. Out of aviation business now so no longer needed. New pulling jaws. DESCRIPTION The G747 is a pneumatic-hydraulic tool designed specifically for installation of CherryMAX® rivets and nut- plate rivets. Its durable. All metal housing makes this tool ideal for use in rugged shop environments. It has many ergonomic features: light weight, comfortable fit in the operators hand, and operation in any position with one hand. This tool utilizes straight, offset and right- angle pulling heads, all of which can install-4, 5, and-6 diameter CherryMAX® bulb type rivets in all head styles, materials and grip lengths. Extensions are available for extending the pulling heads to reach limited access areas. Refer to the tables below for the correct pulling head part number. SPECIFICATIONS ... moreAir Pressure Stroke Pulling Force Cycle Time Weight Noise Level Vibration Air Consumption 90 PSI(6.2 bar) min.110 PSI(7.6 bar) max. 437 inch(11.1 mm) 2100 lbs(9.34 kN) 90 PSI(6.2 bar) Approximately one second 3.5 lbs(1.59 kg) 71 dB(A) less than 2.5 m/s2.09 SCF/cycle(2.55 L/cycle) On May-14-13 at 15:11:11 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
Up for grabs is a rivet removal tool. With 4 collets for your 4 common rivet sizes. Be careful if you buy from someone else, the original one that was made would not accept cobalt bits. You can use any threaded bits with this removal tool. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 13:23:41 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
|
|
|
Up for grabs is a Cleco 1/4" drive reversible nut runner in great shape. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 12:35:10 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
|
|
|