|
|
Order by: |
Buy It Now
$12.90 Shipping
Condition: New Location: Willingboro, United States
The product is used surplus. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers.
Buy It Now
Free Shipping
Condition: New Location: Tempe, United States
Can also be used in applications with any fluid, liquid, or gas that is compatible with brass. Connection Size: ¼" NPT. Liquid Fill Material: Glycerin. Case Material: Stainless Steel. Connection Material: Brass.
Buy It Now
$24.44 Shipping
Condition: New Location: Fort Lauderdale, United States
SPX Air Hydraulic Pump 6 CU. SOLD AND MARKETED AS OTC MODEL 4020 AS WELL. THE pedal pump that started it all. Serviceable pump motor is not a throw away"; providing economical repair. Power Team. Reservoir Capacity (Cu. ).
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
Keep Reading Steady During Engine Operation ,with easy to Vent Plug for accurate readings. - Custom Dial Layout. -4°F to 140°F (-20°C to 60°C). Fill: Li q ui d Fi l l ed (G l y c eri n). Case Design.
Buy It Now
Free Shipping
Condition: New Location: Stockton, United States
Type:Push in fitting/Push to connect / Size:5/32" Straight Union Connector. Fluid Admitted:Air Vacuum Water (no freezing). Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
3/4" male NPT by 3/4” female NPT air compressor in tank check valve, with 1/8” female NPT threads on the side for an un-loader port. Check valves are used to prevent backflow of air. This style is used to directly screw into the air tank and keep pressure from leaving the tank and putting pressure against the compressor pump once the compressor is shut off.
Buy It Now
Free Shipping
Condition: New Location: Toms River, United States
Also referred to as: AW 32 Hydraulic Oil, AW 32 Hydraulic Fluid, ISO VG 32 Hydraulic Oil, ISO VG 32 Hydraulic Fluid, ISO 32 Hydraulic Oil, ISO 32 Hydraulic Fluid, Grade 32 Hydraulic Oil, Grade 32 Hydraulic Fluid.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
1/4" NPT Lower Mount. Crimped Style Casing. DRY PRESSURE GAUGE. Copper Alloy. Warning: This product contains chemicals such as lead in brass component known to the state of California to cause cancer and birth defects or other reproductive harms.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Certified 1/4" NPT Threaded 200 PSI air compressor/tank pressure safety relief valve. Also known as a "Pop Off" or "Blow Off" valve. This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols. The relief pressure of this valve is set at 200 PSI and is accurate within + or - 3% of the set pressure.
0 bids Free Shipping
Condition: New – Open box Location: Abilene, United States
Ross Controls 498K87 VALVE BODY SERVICE KIT27 SERIES3/2 NORMALLY CLOSEDPORT SIZE 1/4 -1/2
0 bids Free Shipping
Condition: New Location: Kansas City, United States
May be used in place of Rainsoft PN 17964.
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
NPT Quick Disconnect Couplings. Size: 3/8 " NPT Set of 4. Standard: ISO 7241-1 Series "A". Interchangeable with: Snap Tite 61, Parker 6600, Aeroquip 5600, Dixon K, Safeway S56, Tomco A5600, Stucchi BIR, Faster ANV Material: Steel Seals: NBR.
Buy It Now
Free Shipping
Condition: New Location: Stockton, United States
We Produce Professional Production of Pneumatic Parts, Air Filters, Solenoid Valves, Pneumatic Pipelines and Other Pneumatic Components. 【Size】4mm OD x 2.5" ID. 【Model】Nylon.
0 bids Free Shipping
Condition: New Location: Chino, United States
Application It can be widely used in electric power repair, construction work, fire safety, and other fields. It is used for pipeline repair, pipeline construction, inspection, flange pipe replacement, etc. Specification Material: Iron Flange Spreader Model: FS-14 Oil Storage Capacity: 400cc/400ml Hydraulic Pump Model: CP-180 Threaded Connector Specification: ZG3/8 Max.hydraulic Output: 14T The Thickness of the Tip: 6mm/0.23in Max.separation Distant: 81mm/3.18in Package Size: 38.5*22.5*17cm/15.15*8.85*6.69in Gross Weight: 14kg/30.86in Package Included 1* Flange Spreader 1* Hydraulic Pump 1* Safety Block 2* Step Blocks 1* Allen Key.
0 bids Free Shipping
Condition: New Location: , United States
Welcome to our store, we have high-quality pre-sales and after-sales service. Before you buy this Item, you can contact us if you have any questions, and we will answer you in time. I wish you all the best.
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Port.500-14 NPTF DRYSEAL PIPE THREAD. Shaft: 1" STRAIGHT WOODRUFF KEY.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Brand new pack of two 1/4" male NPT air compressor tank moisture drains. These are top-quality o-ring sealed drains. This style of drain is much easier to use than the other petcocks that have a "Tee" shaped handle and no o-ring. Unlike the cheaper quality tee handle drains, you can easily twist these drains open and closed with your fingers! These drains have 1/4" male NPT threads that screw into your drain port. If you want drains that are easy to open / close and keep a leak-free seal, you will love these drains!.
Buy It Now
$7.01 Shipping
Condition: New Location: , Ireland
0 bids Free Shipping
Condition: New Location: Arlington, United States
Screw Driver Stop Kit( REBUILD KIT FOR ROYAL AND REGAL FLUSH VALVES). SLOAN- H-541-ASD, 33088853- REBUILD KIT FOR ROYAL AND REGAL FLUSH VALVES. Now it is easy to buy the complete kit to repair your Sloan flush valve.
Buy It Now
Free Shipping
Condition: New Location: Tempe, United States
1/4 O.D. Tube x 1/8" Male NPT Connector Nickel Plated Brass Push to Connect One Touch Fitting. Any reason, including: Changed your mind, thought they would be bigger, or smaller. Thought they would be shinier or duller.any reason.
0 bids Free Shipping
Condition: New Location: Atkins, United States
This Zinga BE-10-0 filter is perfect for your hydraulic or pneumatic system. It has a 10-micron filtration rating and is designed to keep your system running smoothly. With its high-quality construction and durable materials, this Zinga filter is sure to last for years to come.The filter is designed for use in industrial applications, making it ideal for businesses and professionals. Its compact size allows it to be easily installed in tight spaces, while its efficient design ensures that it will provide reliable performance. Whether you're looking to replace an old filter or install a new one, this Zinga BE-10-0 filter is a great choice.S20
Buy It Now
Free Shipping
Condition: New Location: , United States
The four port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free.
Buy It Now
Free Shipping
Condition: New Location: Sunnyvale, United States
ManufacturerQuickun. Working Temperature Range 0-60°C | 32～140°F. Type Does not apply. ISBN Does not apply. Part Number 1-3020-pu-8black. Material Plastic. Item Weight 13.1 ounces. Weight: 13.1 oz.
Buy It Now
Free Shipping
Condition: New Location: Flushing, United States
Thread: ¼ inch Turn On Air Compressor 90 PSI ; Turn Off Air Compressor 120 PSI Fitment: Fits 12V or 24V Applications Ideal For Air Horns,Train Horns,Air Suspension Compressors,ect. High Accuracy ; Tank Mount Type Package Included: 1 X Horn Compressor Air Pressure Switch.
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
A schrader tire fill valve on the side for filling the air bubble. The safety relief valve ring is on the side and with manual override. The air tank end is 1/2" MNPT. The gauge port is 1/8" FNPT.
Buy It Now
Free Shipping
Condition: New Location: Tempe, United States
Can also be used in applications with any fluid, liquid, or gas that is compatible with brass. Connection Size: ¼" NPT. Liquid Fill Material: Glycerin. Case Material: Stainless Steel. Connection Material: Brass.
Buy It Now
$0.99 Shipping
Condition: New Location: Palm Beach, United States
0 bids Free Shipping
Condition: New Location: Whippany, United States
2 EFFICIENT SEWER JETTER NOZZLES. 1 Sewer Jetter Nozzle. Inner tube is made of thermoplastic polyester. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone.
Buy It Now
Free Shipping
Condition: New Location: San Jose, United States
AVS Series Pneumatic Air Actuated Angle Seat Valve Specifications AVS Series Pneumatic Air Actuated Angle Seat Valve Components Installation Hardware: 1 Piece Tube OD 1/4" X Thread 1/8" Male Straight Connector Included.
0 bids Free Shipping
Condition: New Location: Chino, United States
Protable Hydraulic accumulator Nitrogen Charging Filling Kit Gas Valve Test. The inflatable tool is a special tool for accumulator charging, adjusting air pressure and checking inflation pressure. It has the characteristics of compact structure, convenient use, safety and reliability, high pressure resistance and impact resistance.
0 bids Free Shipping
Condition: New Location: Hebron, United States
Test Coupling Test coupling: G1/8, 1 PC. Test coupling: G1/4, 1 PC. Test coupling: G3/8, 1 PC. Test coupling: M10 1, 1 PC. Test coupling: M10 1.25, 1 PC. Test coupling: M14 1.5, 1 PC. Test coupling: UNF7/16-20, 1 PC.
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Port.875 O RING SAE. Shaft: 1" STRAIGHT WOODRUFF KEY.
Buy It Now
Free Shipping
Condition: New Location: New York, United States
8pcs Pneumatic Muffler 1/4 Air Solenoid Muffler Valved Connector Exhaust. - Silencer prevents sound transmission and allows airflow through, can help you reduce noise well. Vacuum Tee Connector Garden Hose Splitter Water Pump Accessories Pipe Fittings.
Buy It Now
Free Shipping
Condition: New Location: Conroe, United States
Quad Rings.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
An d da m pe n P ul s a ti on &V i brati on. Crimped Style Casing, Stainless Steel. LIQUID FI LL E D PRE SS URE G A UG E. 4" Stainless Steel Case / Brass Connection - Lower Mount. Copper Alloy. Stainless Steel Case.
0 bids Free Shipping
Condition: New Location: Katy, United States
WHY GO WITH A HEAVY DUTY PRESSURE SWITCH, RATHER THAN A STANDARD SWITCH??. FOUR PORT 1/4" CONNECTION TYPE. HEAVY DUTY 26 AMP PRESSURE SWITCH. THIS SWITCH REPLACES FURNAS. SQUARE D. AND MOST OTHER PRESSURE SWITCH MANUFACTURERS.
0 bids Free Shipping
Condition: Used Location: San Marcos, United States
We do our best to test basic functions when available, take pictures, and describe the product as best we can. We are proud of the service and quality of the products we provide.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
Rated at 26 AMP, 120 / 240 volt. Automatic Tank Drains. has a pressure release unloader valve for 1/4" compression tube. PRESSURE SWITCH. Pressure Switches. UR and CSA approved. The bottom side has a single 1/4" FPT port.
0 bids Free Shipping
Condition: New Location: Hebron, United States
150N2150, OSPC 80 ON, OSPC80ON. Part Number.
0 bids Free Shipping
Condition: New Location: Chino, United States
Hydraulic accumulator nitrogen charging filling and pressure test kit can be suit most accumlator. 1 x Nitrogen Charging Filling Gas Valve Test Kit. l Material: Carbon steel. l Thread Connection Size: M14 1.5, UN5/16, UNF7/8, UNF5/8,UNF1/2, G1/4.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
CRAFTSMAN / PORTER CABLE / DEVILBISS. Compressor Motors. Compressor Oil. Compressor Repair Parts. Vacuum Pump Parts. 120V POWER CORD. 120 VOLT 3 WIRES 14/3 14 gauge. Air Compressors.
0 bids Free Shipping
Condition: New Location: Lake Orion, United States
Get that leaky pump to stop leaking !
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
1/4" NPT Lower Mount. DRY PRESSURE GAUGE. Copper Alloy. Warning: This product contains chemicals such as lead in brass component known to the state of California to cause cancer and birth defects or other reproductive harms.
Buy It Now
Free Shipping
Condition: New Location: Brandon, United States
Size: | 1/4-18 NPT Male Thread | Tank Mount Type |. Versatile Use: | Fits 12V or 24V Applications; | Ideal for Air Horns, Train Horns, Air Compressors, Oil Tank Pressure Switches etc.
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
Interchangeable with: Parker 3000 Series, Safeway S30 Series, Stucchi IVHP Series, Snap Tite 76 Series, Enerpac C-604, Faster PVVM Series. NPT High Pressure Quick Disconnect Couplings. Size: 1/4" NPT Thread.
Buy It Now
Free Shipping
Condition: New Location: , Canada
When You Buy MILTON You Buy The Best. 2 / P/N 1813 couplers "G" style 3/8" female NPT. 1 / P/N 1819 coupler plugs "G" style 3/8" male NPT.
Buy It Now
Free Shipping
Condition: New Location: , United States
No extra sealing needed, just need a simple push, provide secure connection. Material - Made of quality PU & Plastic. High pressure resistance, can withstand strong pressure without tripping out. Push to connect fittings type: 1/4", 5/16", 3/8",1/2'， fit for 6mm 8mm 10mm 12mm OD tube.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
2mm Cross Section (Thickness).
Buy It Now
Free Shipping
Condition: New Location: , United States
Sirr0und Genova 3" 22-1/2D Abs Elbow ABS Schedule 40 DWV. (1/16 bend). MPN# 80830 SKU# 417602UPC# 38561000566Fits For: Drain, Waste and Vent ApplicationsCompatible Pipe Material: ABSBend Degree: 22-1/2 deg.End 1 Diameter: 3 in.End 2 Diameter: 3 in.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Air compressor unloader control pilot valve. This valve is just like our other unloader pilot valves with the male threads on the bottom except this is a shorter version with 1/4" female threads on the bottom so it doesn't take up so much room in cramped spaces. This valves is the same size in diameter but the height is 3 1/8" inches which is about an inch shorter than the other unloader valves. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air-actuated discharge valves.
Buy It Now
Free Shipping
Condition: New Location: Poughkeepsie, United States
This Bendix Pneumatic filter is a great replacement for your old one! It is designed specifically to work with Bendix 5013672 PuraGuard systems and ensure that your machinery is running smoothly. Made with high-quality materials, this filter will provide long-lasting performance and help keep your machines in top shape. The filter is suitable for use in Other Hydraulics & Pneumatics, Hydraulics, Pneumatics, Pumps & Plumbing, and Business & Industrial applications. Whether you're a professional mechanic or just someone who wants to keep their machines running smoothly, this filter is an excellent choice.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
One side has a pressure release unloader valve for 1/4" compression tube. Rated at 20 AMP, 120 volt. Pressure Switches. The bottom side has a single 1/4" FPT port. Check Valves. Compressor Repair Parts.
Buy It Now
Free Shipping
Condition: New Location: Oldsmar, United States
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
1/4" NPT Back Mount. Crimped Style Casing. DRY PRESSURE GAUGE. Copper Alloy. Warning: This product contains chemicals such as lead in brass component known to the state of California to cause cancer and birth defects or other reproductive harms.
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
Tractor PTO Pump. It can boost the power conversion, greatly improving the work efficiency. This tractor PTO pump is made of high-strength iron, which endures high pressure, impact, has corrosion-resistance and rust resistance.
Buy It Now
Free Shipping
Condition: New – Open box Location: Lawrence, United States
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
1" Wet Line Wing Style Coupler / Coupling Set - Male + Female. 3/4" Wing Style Coupler. 1" Wing Style Coupler. 1 and 1/4" Wing Style Coupler. Applications: Hydraulics and fluid transfers, Dump and refuse vehicles, On-highway hydraulic wet lines.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Set of 2 brand new 1/4" Male NPT pull style air tank moisture drains with 60" poly-coated steel cables. These are high-quality, solid brass, pull-style drains that can be used to replace any standard 1/4" drain or petcock. These screw into the threads on the bottom of your tank, with this style of drain; however, you do not have to get on the ground and manually twist it open to release the moisture. All you do is pull on the cable and the unique design of the valve releases air pressure and moisture. When you release the cable the drain valve automatically seals itself and does not let any air pass through.
0 bids Free Shipping
Condition: New Location: Brea, United States
Equivalent Parker/Greer PN 702998, Interchangeable bladder repair kits for bladder accumulator maintenance, including. Bladder Buying & Storage Guide. Why buy accumulator bladders from us?. Standard 7/8“ Stem, SAE#5 charging port.
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Port.875 O RING SAE. Shaft: 1" STRAIGHT WOODRUFF KEY.
|
|
|
Dayco WB60 Hose Crimper– Used– Fully Functional· Supported by Parker– crimp specs for Parker brand hoses are available· Crimps up to 2” ID· Easy to set-up- color coded dies for easy identification· Includes all Standard Die Sets(10) and Pusher Plates(3) Adjustable work light included· Includes a rest to display crimp specs on top ofbuilt-in die cabinet· Crimp specs for a large variety of hoses included· Coupling stop also included aa Also includes· Parker BW series fittings. JIC. Pipe, OFS, Code 61 and 62, straight, 45, 90. Assorted sizes and configurations from#8 to#24. Various lengths of Parker 721TC hose. Crimper is sold“As-is” The only damaged part is the pins that hold the large pusher plate are bent. But still fully functional. Crimper is located ... morein Delran, NJ, and buyer pays all shipping costs(via truck freight) Unit weighs about 550 lbs. Please email for rate quote. Condition: An item that has been used previously. The item may havesome signs of cosmetic wear. But is fully operational and functions asintended. This item may be a floor model or store return that has been used.See the seller's listing for full details and description of any imperfections. `cb.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a11%3E%60cb-13de6062024-0xfe-
|
|
|
Used- GREAT CONDITION Parker Hydraulic Hose Crimp Die Part# 80C-A08 See my other listings for several other size crimp dies:
|
|
Bendix TU-F10 550 109087 Air Compressor SPECIFICATION Bullseye Catalog# 29850 Used Compressor turns and Has good compression. Not tested. Weight: 57 lbs, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. ... moreFeel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and
|
|
|
We have for sale a used hydraulic impact wrench and drill with 7/16" hex. Quick change chuck, and insulated handle. It has standard fittings, no hoses. This type is commonly used in electric utility industry. Please see photos for details. Questions about this item? Contact me through My Messages in ebay. Check out our other items in my eBay store. Various& Sundry" Thanks for Looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e3e601194-0x105-
|
|
|
This listing is for a Parker KarryKrimp portable hydraulic hose crimper and Enerpac Turbo pump. Also included are 7 dies. 2 rings and miscellaneous hose. Item has been tested and is in working condition. Please note this item is very heavy and flat cost shipping applies to continental US only. Feel free to email with any questions and thanks for looking!
|
|
|
Vickers Coil 523604 14 day return policy. I will ship international.
|
|
EATON ET1000 High Pressure Hydraulic Crimping Machine 10.000lb Crimp Force* Left Side: Right Side, Manufacturer: EATON Model: ET1000 Description: Mechanical Crimper Condition: Used. Item has scratches. Scuffs and is dirty from previous use. Packaging Condition Details: Slightly Distressed. Box has tears and wear. Hydraulic Crimping Machine Type: High Pressure Capacity: 1 and 2 Wire Hoses from 1/4" to 1-1/4" Crimping Force: 10.000lbs Max. Crimping Force: 5 tons Max. Pressure:10.000psi Oil Capacity: 36cu in Height: 22" Width:16" Depth: 14" Application: For Crimping Fittings onto Hose Jaw Length: 5" Jaw Width: 3" For Use With Crimpable Fittings*This item is not eligible for combined shipping. Includes: EATON ET1000 High Pressure Mechanical Crimper. Hardware, ... moreInstruction Kit as pictured and described. Packaging Condition: Slightly Distressed We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping
|
|
|
selling a Greenlee Fairmont HCS816 hydraulic ChainSaw.I picked this specific item up at a an auction and have no way to test it.so its being sold as is.looks to be in good shape though.chain saw
|
|
Heypac HA20-SN-01 Hydraulic Accumulator Recharged SPECIFICATION Bullseye Catalog# 31058 Weight: 3 lbs 3 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment ... moreif you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click ADD TO CAR
|
|
THIS IS A BLACKHAWK 12" JACK GOOD CONDITION# Shipping on this item is 32.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped ... moreout within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item25.
|
|
|
PARKER 35662009 PREP-AIR REGULATOR 300PSIG 3/4" NPT. NEW-NO BOX(AS PICTURED) $10 SHIPPING TO THE LOWER 48 STATES. INTERNATIONAL SHIPMENTS-SHIPPING MUST BE QUOTED. COMBINED SHIPMENTS WELCOME! R30)
|
|
|
Here is a HYTEC air over hydraulic pump# 100190 model D. Hydrau lic pump com plete with 2 way.4 position valve and pressure switch# 9625 adjust able from 1.000 to 10,000 PSI. It has been tested a nd works. It has a 39:1 ratio and a maximum wor king pressure of 4.475 PSI. It will operate eithe r single or double action cylinders. It is set up to operate a single action BVA c ylinde r.Hose and coupler at ths time. ADDED BONUS! Comes with a new BVA 10.000 PSI single action c ylinder and a new Parker 3.000 PSI heavy duty d ouble actio n cylinder wo rth over $1.000.000! You will have to provide your own ball valves or air solenoid valves to control port A and B on the air operated 2 position.4 way valve and the pressure override switch. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13ea72609ed-0xfb-
|
|
|
1000 PSI Gauge by 3D Instruments P/N 25504-29 C 74 GAD Product Highlights. Helically Wound Inconel Bourdon Tube Field adjustable fitting and flange on 4 1/2” ABS case All Wetted Components are 316 SS or Inconel Precision Anti-Friction Sapphire Shaft Bearings Shock Resistant and UV Stabilized ABS and Valox cases Human Engineered Dial Adjustable Zero Set-Point One Moving Part Never need recalibration- Maintain accuracy throughout the life of the gauge Carry a six-year warranty Provide accuracy. Reliability and durability Withstand extremes in vibration. Shock, temperature and other harsh environments. Provide longer. Useful life to the user Reduce overall cost to the user, I have a 30 PSI available also. Free Shipping applies to"great 48" only! Questions? David 832-335-5567
|
|
View my Other Auctions EMAILS answered M-F 8-5 MST SHIPPING TERMS: We use UPS ground service for delivery in the lower 48 states. International customers We use USPS Priority for international delivery. International customers click here for shipping guidelines Shipping fees listed on all auctions via cost calculator for international and domestic. All packaged items include 2" of bubblewrap and/or foam if applicable. Freight Delivery: In Most cases. We will palletize for free. Any crating would be subcontracted. We have forklift loading. We also have local pick up. For larger, heavier items customer is required to make arrangements. We can also get a freight quote for you, and/or ship on your account. If you have any questions about our freight shipment guidelines. Or to get a quote ... moredon't hesitate to contact us. Returns Policy: items sold"as is" have no return. No warranty& no guarantee. AS IS items are not covered by return policy. These sales are final. Southwest Liquidators does not warranty the item in AS-IS auction/store in any way. No refunds. These statements maybe used as an evidence for PayPal dispute or chargeback. DOA means dead on arrival For items with a guarantee. no guarantee unless stated otherwise) items must be returned within 15 days Item must be in original shipped condition(not modified. Not missing parts) Contact us before returning any items Items that are returned more than 15 days after delivery will receive No refund. Buyer is responsible for return shipping charges if applicable. Shipping charges are directly quoted from the shipping company. Please consider these costs when intending to purchase an item. We sell mostly USED Industrial Equipment. Please email us with any questions or if the description is unclear to you. brooks insturment sho-rate flow meter model no. 1355-ooc1aae. item is used. item looks and apears in good condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
You are looking at a absolutely SCREAMING DEAL on a 150 Ton USA Made Jack. Manufactured by SPX-Powerteam. 115v Hydraulic/Electric powered. 150 Ton ram jack mounted on easy to maneuver wheeled cart. It has been demo'd with our sales representative present(never abused) only a handful of times. This unit is in perfect working order! It has been inspected and tested thoroughly- We are an AUTHORIZED sales and service center for SPX-POWERTEAM. Sells new for $16.079.00*FREE SHIPPING! Lower 48 States Only) Power Team Modular design- pump and cart separate from cylinder and base 150 Ton capacity 26" Ret. Height 39-1/8" Ext. Height 13-1/8" Stroke Electric Pump Power Required: 25 amps Manual valve type Remote Control: M I ACCEPT CASHIERS CHECK ONLY. THANKS FOR LOOKING AND GOOD LUCK! ... moreFOR MORE INFORMATION ON OUR COMPANY, THIS ITEM& POSSIBLE USES SEE. or www.StoneHydraulicStore.com See my feedback- 10+ year Ebayer. 100% feedback. Bid with confidence!
|
|
|
UP FOR SALE IS A POWER TEAM GAS POWERED HYDROLIC LIFT TWO STAND SYSTEM. THERE IS LONG HOESES WITH IT THE TWO.TWO 15 TON C156C, WITH THE MOTOR AND HOSES, THERE ARE NO OTHER ACCESSORIES OF ANY KIND TESTED, COULD USE A GOOD CLEANING, THIS IS A GOOD TOOL, THANK YOU FOR SHOPPING WITH US WE APPRECIATE YOUR BUSINESS, Please check my feedback and you’ll see that I’m a trusted seller who deals with quality goods. I strive for customer satisfaction. Thank you for Your time! Only ships within the Continental United States Immediate payment required(M-S) ARA-5-17-13 5042193-1 LKE
|
|
Description: Vintage. Marsh 0-300 PSI? pressure? gauge. The gauge is marked Jas. P. March Corporation, Skokie Ill, Made in U. S. A. The gauge weighs 2 pounds 9 ounces. Dimensions: About 6 ¼” across 1 7/8” deep; face 4 ¾” across. Condition: Very good with slight rusting to the face commensurate with the age. I have no way to test the gauge. Check out my! Handling Fees: Handling fees have been adjusted to comply with ebay’s current policies. PLEASE WAIT TILL END OF AUCTION FOR MY INVOICE TO SHOW THE UPDATED SHIPPING AND HANDLING COSTS AS THEY MAY VARY FROM THE EBAY CALCULATOR. I will give an estimated handling fee in the auction listing. However. After the auction I will update the handling fee based upon the final selling price of the item. There are no charges for insurance, but ... moreall items will be insured for full value. Handling fees as follows: FINAL SELLING PRICE…HANDLING FEE Up to $50…$2.95 $50.01- $100…$3.45 Additional Details: There is no reserve on this item. Buyer to pay the actual shipping plus handling fees as described above. This will show in the ebay calculated shipping charge. If you have any questions. Please try and write prior to the last day of the auction, as I may not be able to get back to you before the auction closes. Domestic Sales: I will email an invoice with shipping costs shortly after the auction closes via the eBay invoice system. Based upon your address in eBay. If you wish to have the item shipped elsewhere or if you fail to receive this, please let me know. Connecticut residents to pay 6.35% sales tax. International Sales(Ship Worldwide) I will email an invoice with shipping costs shortly after the auction closes via the eBay invoice system. Based upon your address in eBay. If you fail to receive this, please let me know. If you wish to have the item shipped elsewhere or have special shipping instructions please email me promptly. For international sales, I normally ship via International Priority Mail with full insurance. Additionally, import duties, taxes a
|
|
You are buying one unit. PHD CTD1U12X1K3 This unit is used. Payment is expected within 72 hours unless other arrangements have been made. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: A-145 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff ... moreand we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jul-07-10 at 17:35:33 PDT. Seller added the following information:
|
|
|
YOU ARE BIDDING ON ONE NOSHOK 0 THRU-100 INH20 GAUGE 2 1/2" DIAL. THIS IS USED SURPLUS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWBCAB) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
YOU ARE BIDDING ON ONE NOSHOK 0 THRU-15 INH20 GAUGE 2 1/2" DIAL. THIS IS USED SURPLUS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWBCAB) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
Lot of 9 Lab Valves. These appear to be stainless steel luer lock 3-way valves. At least one valve has some corrosion or chemical remnant. Weight of valve lot is 0.4lbs. Condition: Used. Sold as shown. Please email with any questions!
|
|
The two steel threaded end connectors are. 1" Threaded Inner Diameter Connected to the one end connector is a threaded aluminum reducer. It is. 1" Threaded Outer Diameter(connected to the tube) 1 1/4" Threaded Inner Diameter on the other end. The straight tubing ends are. 5/8" Inner Diameter The connector on the top is 3/8" Threaded Outer Diameter. 1/8" Inner Diameter There is a stainless steel cap fitting on top of this fitting. The length across of the tube is approximately 5 3/4" The overall length from tip to tip is 8 3/8" Used! Please be aware that our shipping and handling fees reflect not only the cost of shipping your purchase to you. But also the cost of packaging materials. Our time and most importantly, our time hand delivering each package ... moreto the US Post Office. There is NO mail delivery or pick-up in our community. With the cost of fuel, we feel our shipping and handling costs are extremely fair! Save on shipping costs. By buying multiple items. We use flat rate priority mail boxes& envelopes. Whenever possible! This helps save our customers money on their shipping and handling costs when they purchase multiple items. Check out our other great items we have in our ebay store. Camo/ BDU clothing Sizes from XS to 6XL! Items are being added weekly. So bookmark this page& return often, for you will never know what we`ll have for sale! Due to the increasing number of sales. It is taking longer for us to ship our sold items. We will make every effort to ship within 7 days from the time of purchase(payment) Thank you for understanding this and we apologize for any inconvenience that this may cause you. We tend to almost always leave feedback once we have shipped the item. It is a simple way for our customers to know that their item is on it's way! If you are an in
|
|
|
Stanley Hydraulic FOOT for SD67? May fit: BR67, BR40, SP48, others? Light surface rust. No pitting. This has not been cleaned up. Email any questions.
|
|
You are buying one item. SMC NCJ2KL16400 This unit is used. Payment is expected within 72 hours unless other arrangements have been made. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: A-145 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff ... moreand we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jul-07-10 at 17:35:33 PDT. Seller added the following information:
|
|
|
YOU ARE BIDDING ON ONE MYKROLIS 5860 FILTER HOUSING MAX PRESSURE 150 PSIG. THIS IS USED SHELF SURPLUS REMOVED FROM A SHUTDOWN FACILITY AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPSSR) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
Enerpac ZU4 10.000 PSI hydraulic power unit 120v Excellent condition. If you have any questions use the ask seller a question button. Thank you. Check out my other auctions. I will be adding more tools and equipment.
|
|
|
ENERPAC PUMP AND HYDRAULIC CYLINDER ARE IN GOOD WORKING CONDITION.CYLINDER IS NOT MARKED OR STAMPED. UNSURE OF WEIGHT CAPACITY,IT IS ABOUT A FOOT LONG WITH OUT EXTENDING. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f032265e6-0x100-
|
|
|
THERE IS A STANLEY AN A RACINE IMPACT GUNS THEY BOTH WORK GREAT THE RACINE HAS A BROKEN DRIVE AND THE STANLEY NEEDS A NEW SLEAVE AN BALL BUT STILL WORKS GREAT THANKS FOR LOOKING YOU GET BOTH IMPACT SHOWN IN PICTURE
|
|
|
Marshall Town Gauge Excellent condition. Measures PSI/kPa 10 PSI with retard range model 90770 Shipping Weight is 9 oz
|
|
|
UP FOR BIDDING OR BUY IT NOW STANLEY HYDRAULIC CHAIN SAW MODEL CS07 THIS IS A SALE FIND AND IS IN CLEAN CONDITION! I DO NOT HAVE THE ABILITY TO TEST SO IT IS UNTESTED CHAIN MOVES GOOD AND THE TRIGGER PULLS TIGHT CHAIN MOVES BETTER WHEN TRIGGER IS PULLED.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f0809a7a6-0x106-
|
|
|
Huge 2" NPT Moisture Dirt Trap Filter with Moisture Site Glass No Reserve! May need seals. Take a close look at pix. We package our items very well for damage-free shipping. Have a good day& happy bidding! If you have any questions or comments. Please contact us via"Ask a question" Thank you. See our Return Policy details.
|
|
|
MTS Hydraulic Power Unit Model- 506.02 Serial- 0435196 6.4 GPM 3000 PSI 460V 3 Phase MFG Date- 1/99 This unit built brand new woukd be worth more than $20. 000. This unit is in exceptional condition and is ready to be installed on various types of applications. Power unit is sold as is. Came off working equipment. Posted with
|
|
USED 15 HP MOTOR 1760 RPM. 208-230/460 V. 60 HZ MARATHON MOTOR TANK DIM: 57-3/8" X 28-3/4" X 15" OVERALL DIM: 82" X 52" X 72" OVERSIZED: 88" X 60" X 80" PALLET SEE PICS APPROX SHIPPING WEIGHT: 2000 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ... moreITEMS. AJ. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
COUGAR AIR/ PNEUMATIC BALL VIBRATOR ABF-35 COUGAR AIR/ PNEUMATIC BALL VIBRATOR ABF-35 COMES AS SEEN IN PHOTOS. MADE BY COUGAR NO. ABF-35 WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST. Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 11 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply ... morefor items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian
|
|
|
Up for your consideration is a Gast pneumatic(air powered) paint mixer. I believe it is meant to be used with a pressure pot sprayer. But it's also a perfect size to fit in a five gallon bucket. I put some air on it. And it spins, and the variable speed control works just fine, too. It appears to have been well maintained as it doesn't have gobs of paint caked on, and it's not beat up. Local pickup OK USA/Canada shipping only. Canada,HI, AK buyers contact me about additional shipping costs.
|
|
|
I have four hydraulic drills. One is Stanley and one is Fairmont. I think the other two are fairmont but cannot say for sure. I bought these from a county sale. They were taken from a working environment. This is an"as is" sell with no returns. They could be in perfect working order or my need work. Please bid accordingly. I don't have any more information to add but if you have any questions. Please email. Posted with
|
|
|
Here I have a lot of various Autoclave Engineers fittings/glands/collars/etc. I don't know much about these other than they were used for a water jet setup I believe. I bought a complete lot and all of these were with it and I have no use for them so here they are. I wish I knew more about what I had here so I could put more info but I don't. So please bid accordingly. PayPal Only. US Only. Payment required within 24 hours of auction end. Any questions just send me a message and I will try to get back to you within an hour if possible. Thanks for looking and good luck!
|
|
|
You are bidding on a slightly used Enerpac JBI-10 base plate. We bought several hundreds of parts. If you are looking for a different serial number let me know i probably have it. We ship anywhere in the world, just let us know your adress and i'll give you a price. All customs fees are the responsibility of the buyer. We will refund any unopened package, if the buyer pay the shipping cost. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f27cf6bef-0x103-
|
|
|
Used STX Power Team 100-ton hydraulic cylinder Model#C1006C. Unit weighs 92 lbs and has a 6 5/8" stroke. Tag indicates bad seals so a $40 seal kit will need to be purchased. These cylinders retail for $2k.
|
|
|
SMALL Hydraulic Reservoir HEAVY DUTY WITH FILTER. SIZE IS APROX. 20 INCH X 3 INCH WITH FILTER. RESERVOIR IS HEAVY DUTY COMES FROM A GREAT DANE MOWER BUT CAN BE USED FOR DIFFERENT APLICATIONS. ITEM IS USED BUT IN GREAT SHAPE.
|
|
|
YOU ARE BIDDING ON A USED EDMUNDS MFG MODEL 824L PNEUMATIC AIR GAUGE. THE GAUGE IS IN GOOD USED CONDITION AND WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
|
FIFE A9 HEAT SINK ASSEMBLY*USED* 46990-001 Item sold*USED* like new condition- no returns This account is managed Monday- Thursday 8-3pm- SAME DAY DELIVERY(if applicable) USPS priority medium flat rate shipping with delivery confirmation We are a very reputable flexographic millwright business. So you can bid with confidence! If you have any questions. Feel free to contact us! RR 06-6/10/13
|
|
|
YOU ARE BIDDING ON A USED NORBAR MODEL PT1A PNEUTORQUE 1" DRIVE PNEUMATIC TORQUE MULTIPLIER WRENCH. THE TORQUE MULTIPLIER SHOWS SOME HEAVY WEAR BUT IS FULLY FUNCTIONAL AND IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
NUMATICS S21E-04AGKLM AIR PNEUMATIC VALVE NUMATICS S21E-04AGKLM AIR PNEUMATIC VALVE COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST. Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 5 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing ... morestandard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif.
|
|
IAI MOTORIZED CYLINDER 4" STROKE ERC SERIES Click Images to Enlarge IAI MOTORIZED CYLINDER 4" STROKE ERC SERIES COMES AS SEEN IN PHOTOS IAI CONTROLLER IAI MOTORIZED CYLINDER WITH BUILT IN CONTROLLER. STROKE 4" WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS. Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 11 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing ... moreA $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleve
|
|
|
THIS LISTING IS FOR A ENERPAC P-39 HAND PUMP WITH HOSE. HAS BOLT ON THE HANDLE HOLD DOWN ONLY REAL FLAW OTHER THAN PAINT. No. of Speeds = 1 Useable Oil Cap. = 40.0 cu in[Max] Operating Pressure@ Volume/1Stroke = 10000 psi@ 0.160 cu in Oil Displacement Per Stroke = 0.160 cu in Maximum Handle Effort = 111 lb Length = 20.470 in Width = 5 1/4 in Height = 4.690 in Type = Single-Speed Wt. = 13 lb, NPT Port 3/8 Inch. Speed Single, Displacement per Stroke Ist Stage 0.16 Cubic Inches, Length 23 1/32 Inches, Height 4 11/16 Inches, Width 5 1/4 Inches QUESTIONS CALL 540-775-0495 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f365d9714-0x108-
|
|
THIS LISTING IS FOR A spx POWER TEAM P157 2 SPEED HYDRAULIC HAND PUMP HAS A COUPLE OF HANDLING MARKS MINOR SCUFF MARKS AND TORN STICKER WORKS PERFECT COMES WITH NEW 9758 10 FOOT HOSE AND ENERPAC CH-604 COUPLER. Similiar to enerpac p-80. The P157 hydraulic handpump has a capacity of 152 cubic inches. The all-metal construction of SPX handpumps won't burn through in welding environments. The two-speed operation reduces operator fatigue. This handpump will work with single-acting cylinders. Two-speed feature reduces handles strokes so you work faster and easier. Carry handles on all models. 2 Speed. Volume per Stroke(cu.in. 2.6 Low Pressure. 0.160 High Pressure. Maximum Pressure(psi) 325 Low Pressure. 10,000 High Pressure. Oil Capacity(cu.in. 152 more info at QUESTIONS CALL 540-775-0495 Powered ... moreby The free listing tool. List your items fast and easy and manage your active items.
|
|
Used Stanley Hydraulic Chain saw with 13" Bar and Chain Bucket Truck Tractor The saw was in full working condition when last used. The hose fittings were removed to use with another tool as the owner is no longer in the tree business and no longer needed the saw. The saw is a dirty from use and storing. It is in good cosmetic condition with normal signs of wear and use. The rubber handle cover is pretty much gone. Has a 13" bar and chain with it. Bar is straight and the chain feels sharp and has lots of sharpening room left. Thanks for looking! Summary of My Selling Policies Payment METHODS ACCEPTED: Paypal Fees INDIANA SALES TAX: 7% Sales Tax is applicable for Indiana Residents Only. Shipping Once we receive your payment. We normally ship within 1-2 business days of auction closing ... moreand we ship worldwide on items that aren't too large. We offer shipping discount on multiple items. Please note that we may substitute UPS shipping in place of USPS. Delivery We will email you when your item is shipped with a tracking number(if applicable) The shipping confirmation will include estimated delivery date. Refunds& Returns 14 days- There is a 15% restocking fee on all items unless we have misrepresented it. In the event an item is misrepresented. We will refund the original shipping plus original item amount. Return shipping is paid by the buyer in all situations of return. Contact Me Best way to reach us is via email. We do our best to answer every email although there are times depending on when an auction ends that we may not be available to answer your questions. Good Customer service is our number one priority! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee Long Reach Hydraulic Chain Saw. In Good Working Condition CHECK OUT MY OTHER AUCTIONS
|
|
|
ADI Tools/AFRON Long Reach Hydraulic Chain Saw. In Good Working Condition CHECK OUT MY OTHER AUCTIONS
|
|
|
Reliable LR-88.5 Long Reach Hydraulic Chain Saw. In Good Working Condition CHECK OUT MY OTHER AUCTIONS
|
|
Enerpac P-464 hydraulic hand pump. Used but in great condition. This pump has been sitting on a shelf. Shows some cosmetic were as shown in the photos. I real think that it hasn't ever been used. Pump has a 2 speed. 4 way-3 position valve. It can be used to operate a double acting cylinder or two single cylinders. I removed the fittings to test the pump and then reinstalled the plugs, so a little oil is around the one side of the valve. The valve does not leak. Any questions please fell free to message me. Good luck. If you buy BUY IT NOW i will ship it for free. Once again GOOD LUCK! Sorry about the high shipping costs, Unit is a little heavy and large. Depending on the shipping address, I may be able to discount the shipping cost. Model: ENA P-464 277-P-464, Height: 10.630 in, Length: ... more29.230 in, Maximum Handle Effort: 110 lb, No of Speeds: 2, Oil Displacement Per Stroke(1st Stage) 7.690 cu in, Oil Displacement Per Stroke(2nd Stage) 0.290 cu in, Operating Pressure@ Volume/1Stroke: 200 psi@ 7.690 cu in. 10000 psi@ 0.290 cu in, Type: Two-Speed, Useable Oil Cap: 453.0 cu in[Max] Width: 12.130 in,
|
|
Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image hi for sale we have a vintage spirax monnier pressure gauge in fantastic condition and looks like its never been used box is a little bit scuffed measures; 3.5cm across 3.5cm deep inc thread please read please contact me for actual international postage costs to where you are as many places are cheaper than the price listed i want everyone to be happy with their purchases and my ... moreprioity is costomer satisfaction and after sales care but please remember that if you are buying vintage/ antique items they are not new. So these are prone to the normal wear and tear which may include age marks and scratches, which can be expected and only adds to its charicter, authenticity and patina if you have any problems with your purchase please DO NOT go through ebays or paypal returns process before contacting me as i will always do my best to sort any problems you may have we generally post within 48 hours of your payment clearing we send all our items well packed and second class recorded signed for for the uk and royal airmail for international orders. for larger and heavier item they will be sent via courier. All items will have the tracking numbers added to them so you can track your parcel we will accept returns if for a genuine/ good reason
|
|
|
One Daman 2 station D03 hydraulic manifold. Ports. P& T#10 SAE. A& B#8 SAE. Gauge#6 SAE. Manifold has not been in service but did have a D03 valve mounted at one time.
|
|
|
Nachi Piston Motor Z-PM-1B-10-2126E Used condition 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f3e3af08f-0xf2-
|
|
|
OMNI CONTROLS P-150-5 GENERAL INFORMATION: MANUFACTURED BY: OMNI CONTROLS, MANUFACTURER PART NUMBER: P-150-5, DESCRIPTION: 1 1/2 HYDRAULIC SEPARATOR. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274 ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f3e3af0aa-0x106-
|
|
|
LINCOLN ELECTRIC 96A0525 GENERAL INFORMATION: MANUFACTURED BY: LINCOLN ELECTRIC, MANUFACTURER PART NUMBER: 96A0525, DESCRIPTION: LUBE BLOCK 12 PORTS. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|
LINCOLN ELECTRIC 97A6396 GENERAL INFORMATION: MANUFACTURED BY: LINCOLN ELECTRIC, MANUFACTURER PART NUMBER: 97A6396, DESCRIPTION: LUBE BLOCK 12 PORTS. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274 a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f3e3af432-0xd6-
|
|
|
LINCOLN ELECTRIC 97A6943 GENERAL INFORMATION: MANUFACTURED BY: LINCOLN ELECTRIC, MANUFACTURER PART NUMBER: 97A6943, DESCRIPTION: LUBE BLOCK 12 PORTS. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
Air Hydraulics Turntable Indexer 1581-2 Turn Table THIS ITEM IS USED. BUT IN GOOD CONDITION. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 1581-2 OVERALL DIMENSIONS: WIDTH: 25" LENGTH: 35" HEIGHT: 6" WEIGHT: 215 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR ELECTRICAL SURPLUS(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND ... moreUSPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPOR
|
|
Air Hydraulics Turntable Indexer 1581-6 Turn Table THIS ITEM IS USED. BUT IN GOOD CONDITION. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 1581-6 OVERALL DIMENSIONS: WIDTH: 25" LENGTH: 35" HEIGHT: 6" WEIGHT: 215 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR ELECTRICAL SURPLUS(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND ... moreUSPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPOR
|
|
Lubriquip Idex High Pressure In-line Oil Filter Part# 563512(527-100-591) Size- 25-Mic Hydraulic Pressure- 7500 PSI Max Stock ID- MI-78581/ D2 BEFORE YOU MAKE A PURCHASE. PLEASE READ ALL TERMS: Items that are listed as USED have not been tested. Condition is unknown; item is being sold“AS IS” unless otherwise specified in the items description. Any conditional notes will be listed in the additional information. This item is located in our warehouse in Troy. Michigan. Our warehouse hours are open by appointment only. In order to receive the quickest response, please message us directly through our eBay listing. Please be sure to include your name and contact information in your message. Turnaround Time Standard order processing is 2 days regardless of shipping method chosen. Rush and off-hours ... moreservice is available for an additional fee; please email for further information. Storage Policy Unless prior arrangements have been approved in writing. All items are required to be removed or shipped within 10 days of purchase. Items left beyond the 10 days time period will be subject to storage fees beginning on the 11th day after purchase. The storage fee is $20.00 per day, per item. Items left beyond 30 days will be considered abandoned and the customer forfeits the rights to the item(s) There will be no exceptions. Shipping At Midwest Industrial Metals Inc.s discretion. Items that are deemed bulky and/or heavier than 75 lbs, we will NOT ship UPS/USPS. We require freight shipping on certain items to reduce the chance of damages. For items marked freight shipping. Please contact us prior to paying for the item to receive a freight price and provide us with the following information: shipping zip code, if the address is a residential or commercial address, and if a forklift/loading dock is available on site. Once we have this information, we will send a complete invoice with the total charges. If desired, buyers can arrange their own freight shipping. If this action is preferred, please let us know upon payment so
|
|
|
Older model Enerpac pump the was on a specialty press when I bought it years ago. The press finally got out of date(along with me) Well known brand and model in good shape. It was connected by a pair of hoses. The original plugs are back in the pump and it has been drained of fluid. If you were to pick it up in Dekalb illinoins then I would give you some real Enerpac fluid for free 2 stage. 10,000 lbs.Large capacity for the bigger cylinders. I get 25 lbs on my UPS scale and with packaging, I would think 29 LBS is what it would come to. UPS would be best I think. Please email with any questions. Next business day payment by Paypal would be appreciated and I would plan to ship it within a business day or two after that. Thanks di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f3fe832cf-0xf1-
|
|
SMC 1.0MPA 1/2" NPT MICRO MIST SEPARATOR. AFD40-04B Search SMC MICRO MIST SEPARTOR USED CONDITION AFD40-04B 1.0 MPa 1/2" NPT ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 408. KF SW 4 06/13/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order ... morewill be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the it
|
|
|
OAKRANGE HYDRAULIC TEST KIT GOOD CONDITION WITH ADAPTERS SOLD AS PICTURED Vat receipt supplied We ship all over the World We are always available 01334470120 or 07879245628 Powered by
|
|
HYVAIR HYDRAULIC POWER UNIT STACK TANK ST35 PUMP(NUMBERS WERE DIFFICULT TO READ) V2015115-001L2013 MV20640823 WITH WORLDWIDE ELECTRIC CORP MOTOR WWE10-18-215TC 10HP. TEFC, 23-460V, 24.8/12.4A, 60Hz, 1760RPM APPROX DIMENSIONS: TANK- 22 1/2" WIDE X 36 1/2" LENGTH X 13 1/2" HEIGHT 41" GROUND TO TOP OF TANK*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to ... moreyou. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. Approximate weight: 526 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities RAB/ 892/ SURPLUS/ 1) BN
|
|
|
This is a Blackhawk 20 ton jack.Used but still lifts fine,it is 11"17 5/8 when collapsed and extended,please see the pics as I took many so you can see the condition for yourself,selling it because we no longer need it and it is just taking up room in the shop,Thankjs for looking and GOD Bless America and our Troops
|
|
Victor High Purity& Instrumentation regulator Serial# SGL500/15/4F/4F 3000 PSIG Stock ID- MI-78587/ D2 BEFORE YOU MAKE A PURCHASE. PLEASE READ ALL TERMS: Items that are listed as USED have not been tested. Condition is unknown; item is being sold“AS IS” unless otherwise specified in the items description. Any conditional notes will be listed in the additional information. This item is located in our warehouse in Troy. Michigan. Our warehouse hours are open by appointment only. In order to receive the quickest response, please message us directly through our eBay listing. Please be sure to include your name and contact information in your message. Turnaround Time Standard order processing is 2 days regardless of shipping method chosen. Rush and off-hours service is available for an additional ... morefee; please email for further information. Storage Policy Unless prior arrangements have been approved in writing. All items are required to be removed or shipped within 10 days of purchase. Items left beyond the 10 days time period will be subject to storage fees beginning on the 11th day after purchase. The storage fee is $20.00 per day, per item. Items left beyond 30 days will be considered abandoned and the customer forfeits the rights to the item(s) There will be no exceptions. Shipping At Midwest Industrial Metals Inc.s discretion. Items that are deemed bulky and/or heavier than 75 lbs, we will NOT ship UPS/USPS. We require freight shipping on certain items to reduce the chance of damages. For items marked freight shipping. Please contact us prior to paying for the item to receive a freight price and provide us with the following information: shipping zip code, if the address is a residential or commercial address, and if a forklift/loading dock is available on site. Once we have this information, we will send a complete invoice with the total charges. If desired, buyers can arrange their own freight shipping. If this action is preferred, please let us know upon payment so we can supply you with the necessary in
|
|
|
Reliable 425/B Hydraulic Impact Drill. In Good Condition CHECK OUT MY OTHER AUCTIONS
|
|
tem Information Item Name: Hydraulic Pressing Cavities- 2000 psi- 4 per Frame Item# 10469 Price/Each: $10.000.00 Year: Brand Name: Model: Serial# Asset Tag: Item Location City: St. Hubert State: Ontario Zip Code: J3Y8Y5 Country: Canada Item Description HYDRAULIC PRESSING CAVITIES IN FRAME 4 CAVITIES PER FRAME 10 FRAMES AVAILABLE Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be ... moremade through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in transit. Local Pickup is always welcome� No hand
|
|
|
12V HYDRAULIC PUMP WITH SOLONOID This has been hardly used and is in excellent condition We can dispatch with next day delivery to UK Mainland any other areas please contact me
|
|
Toga Development- Your Source of Industrial Parts togadevelopments- your source of industrial parts HYDAC ACCUMULATOR. PST S02 MAWP 3000 Part No: 02054004 Type: DB330-4A1/112S-210C COM. NO: 920063 MAX ALL Working Pressure: 3000 PSI Serial: S02736 Please read our policy below. Buyers are responsible for all shipping and handling charges. Toga Developments creates shipping charges based on item weight and the USPS/FedEx rates given to us via eBay +Our handling charges if any. WE COMBINE SHIPPING! For multiple item purchases please ask for an invoice BEFORE You pay to receive combined sipping discount. After payment. The items will be packed together and shipped within 24 hours. We DO NOT Refund extra shipping if items are paid without first asking for combined shipping invoice. Combined shipping ... moreonly applies when items are shipped together in the same box. Some items may be too bulky or large to combine. Combined shipping dismounts are applied only to item purchased by end of auction each friday. We will not hold items into the next week for combined shipping. WE DO OFFER LOCAL PICK-UP OF ITEMS AT OUR FACILITY IN SANTA ANA. CA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(PST) YOU MUST CALL AHEAD IN ORDER TO SCHEDULE A PICK UP. Your satisfaction is our first priority. Defective product will be offered for an exchange or store credit. It is buyer's responsibility to contact us within 14 calendar days of receiving a defective product. Otherwise. No replacement or refund will be made. All items MUST be returned in their original packaging and condition. The original Shipping and handling charges are not refundable. Buyer is responsible for shipping. Insurance and proof of delivery on all returns. Upon verification of any faults of the returned item. We will reimburse the postage of return and send you a replacement item within 48 business hours if available. We will take care of the cost to send the replacement item to you if item is defective or DOA. We accept Paypal Payment MUST BE made within 7 business days of
|
|
|
SAVANNA STM 200-4 GENERAL INFORMATION: MANUFACTURED BY: SAVANNA, MANUFACTURER PART NUMBER: STM 200-4, DESCRIPTION: OIL FILLED WELD FORCE GAUGE WITH CUSTOM PISTON TO CHECK PRESSURE ON BALANCE WELDER. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|
MAHR SP6IS GENERAL INFORMATION: MANUFACTURED BY: MAHR, MANUFACTURER PART NUMBER: SP6IS, DESCRIPTION: DIAL INDICATOR.01mm. LONG RANGE, SPEED READ. CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
We do honor our 14 day return policy. If you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES. IS WHAT WE SEND TO YOU! MANSFIELD& GREEN(AMTEK) WEIGHTS FOR TESTER MODEL: R-110 4 WEIGHTS USED JP. PLEASE CALL 731-635-3167 WITH ANY QUESTIONS. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ ... moreTHE IMPORTANT INFORMATION ABOUT DESCRIPTION BELOW! Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description for surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgement on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to mispresent. ALL OF OUR SALE/CLEARANCED ITEMS ARE SOLD AS IS. NO RETURNS* ALL PAYMENTS AND FREIGHT SHIPMENTS ARE TO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SMC CDU16-10D Pneumatic Cylinder/ Linear Actuator Here we have for sale one CDU16-10D double acting cylinder Linear Actuator with port fittings. Item is in good used condition removed from a working system. 30 day money back guarantee if not completely satisfied(Buyer pays postage) Please see our other items* Multi-buy deal- Purchase 4 Actuators and receive one completely free*
|
|
THIS LISTING IS FOR A NEW SPX POWER TEAM 115 VOLT SINGLE PHASE HYDRAULIC PUMP. IT WAS MADE BY SPX FOR CATERPILLAR TOOLS. WILL ALSO COME WITH NEW ENERPAC COUPLERS CR400 ON BOTH PORTS\ VALVE 9500 4 WAY 3 POSITION CAT GAUGE SHOUN READY 10000 PSI. SINGLE PHASE POWER 10000 PSI 4 WAY VALVE WITH ENERPAC FITTINGS REMOTE PENDANT Two-speed high performance. Forty years of reliability and constant improvement make Vanguard ® pumps a mainstay worldwide. Some original pumps are still in service! Designed for operating pressures to 10.000 psi. CSA rated for intermittent duty. High noise level of 90-95 dBA. PE554T Same as PE554 except has 9500 4-way/3 position tandem center valve for advance. hold and return functions. Has 1 1/8 hp. 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 ... moreamps at full load, starts at reduced voltage. Internal relief valve preset at 10.000 psi, 2 1/2 gallon PLASTIC reservoir. HAS 10 foot remote motor control PENDANT FULL SPECS AT WILL SHIP EMPTY OF OIL WE PUT ENOUGH IN TO TEST THANKS ART QUESTIONS CALL 540-775-0495 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
HYTORC STEALTH 4 TORQUE WRENCH. Item Description. HYTORC HYDRAULIC TORQUE WRENCH STEALTH 4 SIZE 1-7/8 THIS UNIT IS USED IN GREAT WORKING SHAPE FOR ALL THE INFO ON THIS PLEASE GO TO HYTORC.COM Click any image to see it full size. Shipping Details. Shipping items are shipped USPS first class.USPS priority mail,or UPS ground(for heavy items) contact us if you wish to know how your item will be shipped. Delivery time is usally the same for all(about 3-5 days) We will combine shipping please contact us regarding. INTERNATIONAL SHIPPING WE SHIP INTERNATIONAL, with USPS priority mail internatioal ONLY. we do not falsify customs forms,buyers are responsible for all customs fees,duties or taxes. international shipments generally take 5- 20 days some times longer depending upon how long customs clearance ... moretakes. Please be patient. Payment Details. Payment we accept paypal. About Us. Welcome to our e-bay store. Please add us to your list of favorite sellers and visit often. We sell a wide variety of new and used industrail items and other things as well. Thank you for your business it is very much appreciated. Our Payment Policy. Payment we accept Pay-pal. If payment is not received within 4- days the item will be re-listed. Our Refund Policy. RETURN POLICY We do our best to describe each item accurately. if an item arrives incorrectly described. We will work with you to resolve the situation. We only accept returns on items that do not work upon receiving them. we do not accept returns because the wrong item was purchased or the buyer changed their mind. You must let us know within 14 days of recieving the item to get a refund. OUR GOAL IS ALWAYS ACHIEVE 100% CUSTOMER SATISFACTION. Our Feedback Policy. Feedback is very important to me and I do everthing I can to keep my customers happy. Please e-mail or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. at BiggerBids.com.
|
|
|
DESCRIPTION: For sale in good used condition is a Funk Heat Exchanger. Item weights 65 pounds in a box. SPECIFICATIONS: Part# TDW5-1-W Hydraulic oil to water heat exchanger 1-1/2" SAE oil ports- 3/4" NPT Water ports 5" tube dia- 27" OAL Shell 8 bar 14 day warranty
|
|
For sale is an Aeroquip FT1390 hydraulic crimping machine. It runs off a standard 110V household outlet. It comes with 12 extra dies and one in the press. For a total of 13 dies. It comes complete with the work light to see what you're working on, and a pedal to activate and stop the crimper so you can hold the hose steady and crimp it hands free. Crimps all styles from 3/16" through 2" I.D. including four and six spiral wire requiring internal skive style fittings. This is the Large production crimper and revered as the best 2" crimper on the market. Capable of crimping 6 wire hose. Worth every penny if you crimp 2" hose! Features Front-end loading design Electronic key pad control of crimp diameter Power return stroke. Return limit control Drop-in tooling(crimp die ... morecages) Backstop fitting locator With 29" Depth 28" Height 49" Weight 825 lbs Worklamp The following is a video of the actual unit for sale in operation: This machine retails for $38.352 on Grainger's website! Here is a link to the item on Grainger: Get this high-quality crimper in excellent condition for a fraction of the retail price! Please check my 100% feedback and buy with confidence! Item is available for local pickup or I can assist with shipping as long as buyer makes all arrangements and pays for shipping. I have a forklift to load it for free. Feel free to contact me with any questions. Thanks for looking!
|
|
|
Like New. Never used, 8 Loose Couplers Package of 8- Dixon 1BRBF2-B-7 1/8' RECTUS 21 COUPLER. 1/4' BSPP B Body
|
|
|
These items appear used. And are completely untested, have no idea how they work. One the back piece is broken Posted with
|
|
NUMATICS MODEL P30B-04G COMPRESSED AIR LINE REGULATOR Click Images to Enlarge NUMATICS MODEL P30B-04G COMPRESSED AIR LINE REGULATOR COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 4 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing ... morestandard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visi
|
|
Description I’m cleaning out the warehouse. No Reserve. The winning bidder gets a Sweeney Hydratight Kit. The unit develops the full rated pressure of 10000 psi and works fine. Check our o ther items! You never know what you may find and we will combine shipping whenever possible. Most questions are covered in the description. Payment or shipping sections, read these sections closely, if we missed something E-Mail us and we will post an answer with the item. Our hours are 8 Am to 5 PM. Monday thru Friday, except some holidays. We make every effort to describe each item accurately. However we are not experts on these items, so it is the bidder’s responsibility to determine the suitability of an item for a particular use, therefore all Items are sold AS IS. Thanks for looking at our auctions! ... moreCheck out our other listing now! We are not collectors. We price our items to Sell! SHIPPING(We will use your UPS/FEX account if you desire) Due to size& weight this unit will have to be picked up or ship truck line. As with all our auctions truck line quotes and arrangements are to be made by the winning bidder. Pallet Size& Weight 40"x 48" 200 lbs My Policies: We expect payment to be made within 3 days of close of auction; if you are going to be out of town or can’t get to a phone please don’t bid on this auction. We are required to collect Sales Tax on Deliveries in Georgia. Unless proper Sales Tax Exemption forms are on file. We ship Monday thru Friday(except holidays) usually within two days of payment. We will try to use flat rate shipping whenever possible. But for the times we can’t due to size or weight bidders may use the UPS or USPS website to estimate shipping cost. Winning bidders will receive an invoice with the actual shipping charge added to their bid. Local pick-ups are welcome. But Sales Tax will be collected on pick-ups in Georgia. Unless proper Sales Tax Exemption forms are on file. NOTE: Some items due to weight or size will need to be shipped by truck line. In these cases the winning bid
|
|
|
ENIDINE PM 220 IF-1 GENERAL INFORMATION: MANUFACTURED BY: ENIDINE, MANUFACTURER PART NUMBER: PM 220 IF-1, DESCRIPTION: SHOCK ABSORBER. 2" STROKE, 2,500(fp) MAX. REACTION FORCE lbs. N) CONDITION: PSSC- USED. PART IS BLACK NOT SILVER, ALSO HAS 2 HEX NUTS IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
ROBOHAND 1/2" STROKE 70LBS GRIP FORCE PARALLEL GRIPPER. RP-15 Search ROBOHAND PARALLEL GRIPPER USED CONDITION RP-15 1/2" STROKE 70LBS GRIP FORCE ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 391. KF SW 3 06/14/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase ... morein shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days af
|
|
You are buying one item. Parker 06R113AC This unit is used. Payment is expected within 72 hours unless other arrangements have been made. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: B-147 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff ... moreand we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jul-07-10 at 17:35:33 PDT. Seller added the following information:
|
|
NEW IN BOX- EATON HYDRAULIC GEAR PUMP MODEL 26502-RBT S26 SERIES Normal 0 false false false EN-US X-NONE X-NONE*AUCTION TERMS* PAYMENT OPTIONS: Payment is expected within 7 days of the auction closing. Although we greatly appreciate buyers that figure out their own shipping. And pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING AND HANDLING: UNLESS POSTED AS FREE SHIPPING. BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. ON ITEMS THAT ARE SOLD AS FREE SHIPPING: ANDERSONEQUIP LLC IS RESPONSIBLE FOR THE INITIAL SHIPPING COSTS ONLY. ALL OTHER DUTIES AND CHARGES ARE THE RESPONSIBILITY OF THE BUYER. ITEMS ABOVE 150 LBS. WILL BE SHIPPED VIA FREIGHT CARRIER. SHIPPING AND HANDLING FEES MAY VARY BY WEIGHT ... moreAND SPECIAL MATERIALS NEEDS. ANDERSONEQUIP LLC CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT. WITH RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. INTERNATIONAL BUYERS POLICY: ATTENTION INTERNATIONAL BUYERS. INCLUDING CANADA WE ONLY SHIP USPS PRIORITY MAIL INTERNATIONAL AND UPS WORLDWIDE SAVER! PLEASE KEEP THIS IN MIND WHEN BIDDING ON ITEMS. AND FEEL FREE TO CONTACT US FOR AN INTERNATIONAL SHIPPING QUOTE. ON INTERNATIONAL SHIPMENTS. WE WILL NOT SHOW ITEM VALUED BELOW THE ACTUAL PURCHASED PRICE(S) AND/ OR MARK THE ITEMS PURCHASED AS GIFTS. GOVERNMENT REGULATIONS PROHIBIT THIS BEHAVIOR. FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. ANYONE LEAVING NEGATIVE OR NEUTRAL FEEDBACK WILL BE PLACED ON OUR BLOCKED BIDDER LIST. POSITIVE FEEDBACK WILL BE LEFT UPON CLEARING OF PAYMENT. EXTRA AND LEGAL INFORMATION: PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ANDERSONEQUIP LLC AND ITS EMPLOY
|
|
|
SWEENEY TORQUE WRENCH HOSES GREAT WORKING SHAPE 10.000 PSI 15 FT LONG Please browse our other items ask any questions you may have thanks. Check out my! On Feb-15-13 at 11:04:37 PST. Seller added the following information: 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f4d05681e-0xfa-
|
|
|
SMC VALVE AS ABOVE USED ITEM SELLER REFURBISHED PNEUMATIC SERVICES YORKSHIRE FOR ALL YOUR ON-SITE PNEUMATIC NEEDS CONTACT- pneumaticsuk@gmx.com MOBILE 07538321551 FOR ALL YOUR ON-SITE PNEUMATIC NEEDS ON-SITE PNEUMATIC SERVICES TO THE FOOD AND ENGINEERING INDUSTRY E-BAY UK LARGEST STORE FOR PNEUMATIC EQUIPMENT 25 YEARS WITHIN THE PNEUMATIC INDUSTRY Posted with
|
|
|
NORGREN FLUIDICS BOOSTERMITE. USED ITEM TESTED PNEUMATIC SERVICES YORKSHIRE FOR ALL YOUR ON-SITE PNEUMATIC NEEDS CONTACT- pneumaticsuk@gmx.com MOBILE 07538321551 FOR ALL YOUR ON-SITE PNEUMATIC NEEDS ON-SITE PNEUMATIC SERVICES TO THE FOOD AND ENGINEERING INDUSTRY E-BAY UK LARGEST STORE FOR PNEUMATIC EQUIPMENT 25 YEARS WITHIN THE PNEUMATIC INDUSTRY Posted with
|
|
|
In UCC Line Flow Meter 5- 55 LPM. Currently has a 25mm OD union and a 20mm OD union attached and what looks like a non return valve. Collection from Cambride preferred. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f4d460cae-0xfd-
|
|
Cemcolift Imperial 2000 Hydraulic Power Unit for Residential Elevator THIS POWER UNIT IS USED. THESE UNITS DO NOT HAVE THEIR KEYS. THERE ARE MANY SCRATCHES AND PAINT CHIPS ON THE OUTER BOX AND THE INSIDE HAS A SMALL AMOUNT OF OIL ON THE BOTTOM AND GRIME OF THE VALVES AND MANIFOLD. HERE IS A SUGGESTED SPECIFICATIONS FILE FOR FURTHER INFORMATION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# Imperial 2000 750 lbs Capacity 40 F.P.M. 220 Volts. Single Phase, 60 Hz OVERALL DIMENSIONS: WIDTH: 24" LENGTH: 42" HEIGHT: 37" SHIPPING WEIGHT: 550 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP VIA ... moreFREIGHT GROUND TO ALL UNITED STATES.CANADA, AND MEXICO. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. INTERNATIONAL BUYERS PLEASE CONTACT US FOR A QUOTE. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT O
|
|
|
YOU ARE BUYING A USED WORKSMART WS-MH-HPC-054 10 TON HYDRAULIC RAM JACK 0-43" 10000 PSI THIS ITEM COMES AS PICTURED IN GREAT USED CONDITION SHIPPING WILL BE FREE TO THE LOWER 48 STATES
|
|
|
USED WATER SEPARATOR SET TWO INLINE IN GOOD SHAPE.
|
|
|
Used Challenger Wrecker Body. With Hydraulic Winches and tow bars to make you the repo man. Hydraulics and winches work great, and they can be tested before purchase and before wrecker body is removed from the truck frame. I am keeping the truck, frame, and running gear, but don't need the wrecker. Unit is located in Farmville, VA. Unit has some rust in the expanded metal section, but the hydraulics, winches, valves, and motors are well worth the reserve price. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f57022a05-0xf9-
|
|
Bimba Model: HSCX Sensor w/ Mounting Clamp(Not Pictured) Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. Please contact ... moreSystech prior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
All items sold together as a package deal. MTS Hydraulic Power Unit Model- 506.02 Serial- 0435196 6.4 GPM 3000 PSI 460V 3 Phase MFG Date- 1/99 MTS Hydraulic Power Unit. Model- 506.01D. Serial- 503. 3.1 GPM 3000 PSI 220V MFG Date- 1/84. MTS Hydraulic Actuator. Model- 244.12. Serial- 160. Assembly No. 367703-01. Force- 5.5 KIP(5.500 lb) Area- 2.10 in2. Stroke- 6.00 dyn(7.20 static in) MTS Hydraulic Actuator. Model- 205.08. Serial- 258. Force- 66 KIP(660 lb) Area- 237 in2. Stroke- 1.0 dyn(1.24 static in) Two 11 Piston Accumulators. These units built brand new would be worth more than $20. 000 each. These units are in exceptional condition and are ready to be installed on various types of applications. Power units are sold as is. Came off working equipment. Posted with
|
|
CONTINENTIAL HYDRUALICS R20-84-5223 POLYPAC HYDRAULIC POWER UNIT P84-68 MOD: R20-B7.5BMT-H1-F YR205-1 PUMP MOD: RVR15-20B10-RM-0-1-IY5214 GALLONS: 20 FLUID: OIL Normal 0 false false false MicrosoftInternetExplorer4*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control ... moreover and is an additional charges to shipping. Approximate weight: 622 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities JH/4199/SURPLUS(1)E 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f5e7b48ac-0xfa-
|
|
|
DE-STA-CO B8JG-3257-1-P PNEUMATIC CLAMP ARM 3-1/2" X 4-1/8" GENERAL INFORMATION: MANUFACTURED BY: DE-STA-CO, MANUFACTURER PART NUMBER: B8JG-3257-1-P, DESCRIPTION: DE-STA-CO B8JG-3257-1-P PNEUMATIC CLAMP ARM 3-1/2" X 4-1/8" CONDITION: USAP- THIS IS A USED ITEM SOLD IN AUTOMATION RECOVERY PACKAGING. IF YOU HAVE ANY QUESTIONS PLEASE CALL! 586) 741-5274
|
|
|