|
|
Order by: |
0 bids Free Shipping
Condition: New – Open box Location: Scottsburg, United States
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
Rated at 20 AMP, 120 volt. One side has a pressure release unloader valve for 1/4" compression tube. Automatic Tank Drains. One for pressure relief valve. One for tank pressure. Pressure Switches. Other two for gauge and pressure outlet.
Buy It Now
Free Shipping
Condition: New Location: Lawrenceburg, United States
Buy It Now
Free Shipping
Condition: New Location: New Philadelphia, United States
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. 1/4" SAFETY RELIEF VALVE (POP OFF VALVE). Including, but not limited to, using alternative products.
Buy It Now
Free Shipping
Condition: New Location: Hagerstown, United States
1 Sloan H-636-AA urinal sweat solder kit in brushed stainless steel
Buy It Now
Free Shipping
Condition: New Location: Solon, United States
New, surplus, lot of 10, Dixon, 2" cam & groove coupling gaskets. Material composition is Buna-N (blue stripe). Part number is 200-G-BU.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
1/4" NPT Lower Mount. Crimped Style Casing. DRY PRESSURE GAUGE. Copper Alloy. Warning: This product contains chemicals such as lead in brass component known to the state of California to cause cancer and birth defects or other reproductive harms.
0 bids Free Shipping
Condition: New – Open box Location: Archbold, United States
Kubota 1G700-52160 Injection Pump Shim 1G70052160 New (TSCT) (JH) (PRA16). Manufacturer: Kubota. Type: Injection Pump Shim. New, In working condition. This item is new.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
17mm ID x 25mm OD x 4mm C/S. Silicone Rubber O-rings.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
56288806-00 Non-OEM Comparable To Ingersoll Rand PRESSURE SWITCH W/ UNLOADER VALVE & ON/OFF LEVER. FURNAS HUBBELL PRESSURE SWITCH W/ UNLOADER VALVE AND ON/OFF LEVER. Improved unloader valve design. PRESSURE SWITCH.
0 bids Free Shipping
Condition: New Location: , United States
Cylinder connector fittings (Quick Valve Female Connector) have a threaded male end perfectly matched to our cylinder/cup housings. The other end has the female Quick Disconnect Fitting that allows for no loss of vacuum when disconnected from the male Fitting.
Buy It Now
Free Shipping
Condition: New Location: Brenham, United States
We at TEMCo pride ourselves in being able to provide quality products with added value at low prices. How the knob is turned depends on the type of muffler you are looking at. By closing the valve, the amount of exhausted air being dumped out of your system can be restricted or increased.
Buy It Now
Free Shipping
Condition: New Location: Sarasota, United States
We are a husband and wife team. Two things set us apart.
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Replaces Dewalt 5130236-00. pilot valves are used in compressed air systems to actuate another device using a pneumatic (air) signal. pilot valves always work in conjunction with another device. Pilot valves operate in a set pressure range.
0 bids $9.95 Shipping
Condition: New Location: Hammonton, United States
Listing is for 5 pieces of 1/2" CT Metfit straight coupling New in Bag NOS 5 pieces
Buy It Now
Free Shipping
Condition: New Location: Sarasota, United States
We are a husband and wife team. Two things set us apart.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
1" x 1" female npt inline air compressor check valve. This valve is brass constructed, and is 4 long. The inline check valve design is made for applications where a normal in tank check valve will not work. This valve can be installed anywhere in the discharge line of the compressor before the air goes into the tank. This valve has an 1/8 port in the side for a un-loader line, If your compressor does not have one then it can be plugged. The inlet side of this valve is stamped with the letters IN, it is very important that you get it in the right direction. If not installed correctly it can do damage to your compressor.
0 bids Free Shipping
Condition: New Location: Bristol, United States
Pipe, Connection Size 1: 25 mm, Connection Type 2: Pipe, Connection Size 2: 25 mm, Aluminum, Dimensions: 59 mm L x 42 mm W x 44 mm H, -4 to 176 deg F
0 bids Free Shipping
Condition: New – Open box Location: Abilene, United States
Ross Controls 498K87 VALVE BODY SERVICE KIT27 SERIES3/2 NORMALLY CLOSEDPORT SIZE 1/4 -1/2
Buy It Now
Free Shipping
Condition: New Location: Wauconda, United States
1/4" NPT Connection. Brass Internals and NPT Connection. 2" Dial Size. Suitable for Air, Water, Oil & Gas.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
1"NPT ports. Lift Tables. Information and Support. Part Number F315CN2-10B-M225N4N4198. LET'S STAY IN TOUCH. Condition Used. Cranes & Hoists. Product Details.
Buy It Now
$1.12 Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: Louisville, United States
21 and 7 GPM gearsets combine for 28 GPM total. From Tool Tuff Direct - Your Source for Log Splitter Parts Since 2012! Max RPM: 4000. Looking at shaft side, pump rotates clockwise - Your engine must spin counter clockwise when looking at the shaft!
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Its all stainless-steel construction is well suited to even the harshest conditions. The Kingston model 112CR, like every Kingston valve, is set and tested at the factory for quality and dependability.
0 bids Free Shipping
Condition: New – Open box Location: Wooster, United States
Sale is for a Lot of Eight of (8) New Out of Box Lincoln 66415 Male Tube Connector. Mfg.#- 66415. You will receive eight (8) of these with this sale. Mfg.- Lincoln. We get our inventory from local manufacturers and liquidators.
Buy It Now
Free Shipping
Condition: New Location: Gloucester City, United States
Buy It Now
Free Shipping
Condition: New Location: Sarasota, United States
We are a husband and wife team. Two things set us apart.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Blow Guns & Tire Inflators. Air Compressor Oil. Compressor Rebuilt Kits. Relief Valves. • 1/2" Male NPT Into Tank. Vibration Pads. Throttle Cont Cables & Valves. • 3/8" Male Flare For Incoming Air From Pump.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants, hydraulic oils, gasoline, fuels and L.P. gases. Buna 90 O-rings. Price is for 50 pieces.
Buy It Now
Free Shipping
Condition: New Location: Shelton, United States
Watts / F&R pressure gauge; 105-106-110-111. Mount: Panel mount (3 screws on 3" (75mm) bolt circle) Gauge fits in a 2 1/2" hole. Fitting: 1/4" NPT brass. Made in Germany.
0 bids Free Shipping
Condition: New Location: Feasterville Trevose, United States
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
ROLAIR PRESSURE SWITCH. 4 PORT SIDE-WIRE FEED. Vacuum Pump Parts. Automatic Tank Drains. PRESSURE SWITCH. Pressure Switches. Air Compressors. Air Dryers.
Buy It Now
$5.95 Shipping
Condition: New Location: Topeka, United States
Rhino # 00762114. P/N 09-011 and ⌀ 23x18x1.5 Sealing Washer. P/N 07-022. This plug is a spring-loaded check ball type, set to vent pressure. This plug must be installed with sealing washer P/N 07-022.
Buy It Now
Free Shipping
Condition: New Location: Rogers, United States
MAG 1® Full Synthetic Universal 2-Cycle Oil is formulated for superior engine protection and low smoke with 100% pure full synthetic base oil and high performance additives. Case of 36 Individual Bottles.
0 bids Free Shipping
Condition: New Location: Jessup, United States
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Price is for 25 pieces.
Buy It Now
$1.27 Shipping
Condition: New Location: , China
BSP Male Thread to Hose Tail End Connector.
Buy It Now
Free Shipping
Condition: New Location: Hollywood, United States
New, Temperature & Pressure Back Mount Gauge 1/4" NPT, 2-1/2 Face.
Buy It Now
Free Shipping
Condition: New Location: Miami, United States
Lubricates stems of faucets, valves, ballcocks etc. Petroleum based formula. Makes hard-turning faucets work smoothly. Formulated for many plumbing applications. Makes hard turning faucets work smoothly.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Price is for 100 pieces.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
FKM Heat Resistant O-rings. A general purpose FKM. 24mm ID x 30mm OD x 3mm C/S.
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. 1/8" SAFETY RELIEF VALVE (POP OFF VALVE). Including, but not limited to, using alternative products.
Buy It Now
$4.99 Shipping
Condition: New – Open box Location: Fenton, United States
Thread is BSPT (British Standard Pipe Thread). Popular in. Thread size; 1/4” BSPT (British Standard Pipe Thread). Tubing O.D. Size; 6mm. Warehouse dust and dirt as seen on pictures. Actual item on pictures.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants, hydraulic oils, gasoline, fuels and L.P. gases. Buna 90 O-rings. Price is for 10 pieces.
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. 1/8" SAFETY RELIEF VALVE (POP OFF VALVE). Including, but not limited to, using alternative products.
Buy It Now
Free Shipping
Condition: New Location: Independence, United States
Sauer Danfoss OSPM 50 ON 150L0065. The Kubota K2561-41510 Steering Valve. Replaces Kubota K2561-41510. Kubota BX1500, BX1800, BX1830, BX1850, BX1860, BX1870, BX1880, BX2200, BX2230, BX2350, BX2360, BX2370, BX2380, BX2660, BX2670, BX2670-1, BX2680.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Flow 50 gpm, Max. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Buy It Now
Free Shipping
Condition: New Location: Lewiston, United States
2 Button Overlay (Sticker) for Sure Grip SU Series Hanle.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
Improved unloader valve design. Non-OEM Comparable To Ingersoll Rand. Non-OEM Comparable To Ingersoll Rand Part#: 56288020. PRESSURE SWITCH. Pressure Switches. California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
1/2" X 1/2" female npt inline air compressor check valve. This valve is brass constructed, and is 3 1/16" long. The inline check valve design is made for applications where a normal in tank check valve will not work. This valve can be installed anywhere in the discharge line of the compressor before the air goes into the tank. This valve has a 1/8"port in the side for a un-loader line, If your compressor does not have one then it can be plugged. The inlet side of this valve is stamped with the letters IN, it is very important that you get it in the right direction. If not installed correctly it can do damage to your compressor.
0 bids Free Shipping
Condition: New Location: Mc Lemoresville, United States
Local pickup is free!
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Port Type.500-14 NPTF DRYSEAL PIPE THREAD PORTS. Mounting: 4 Bolt Std - 44.40 [1.748] Dia. X 3.05 [.120] Pilot. 375-16 Unc-2b Mounting Holes On 82.55 [3.250] Dia.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
1/4" NPT Lower Mount. Crimped Style Casing. DRY PRESSURE GAUGE. Copper Alloy. Warning: This product contains chemicals such as lead in brass component known to the state of California to cause cancer and birth defects or other reproductive harms.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants, hydraulic oils, gasoline, fuels and L.P. gases. Buna O-rings. Size #429= 5 ID x 5-1/2 OD x 1/4 CS.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Auxiliary unloader for air compressors, this is also commonly known as an unloader assist. This valve features 1/4" male NPT threads. This valve is typically installed directly in your air compressor's discharge line. Using this valve will provide you with additional unloading aid for starting your compressor in cold weather or when you have low voltage.
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
CONNECTION: BRASS - 1/4" NPT LOWER MOUNT. LIQUID FILLED (GLYCERIN). YOU ARE LOOKING AT ONE PRESSURE GAUGE. 2-1/2" FACE. All information listed herein is, to the best of our knowledge, believed to be correct.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
72mm OD x 10mm HT End Cap. Used in gearbox and bearing shaft bore to seal where no shaft passes through.
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Rotation: Right Handed (Clockwise). Shaft: Straight Keyed. Outlet Port Connections: 1" NPT Thread.
Buy It Now
$25.00 Shipping
Condition: New Location: Kansas City, United States
Danfoss 11228973 OSPM 63 PB STEERING UNIT.
|
|
|
|
FAIRMONT H 8508 IMPACT WRENCH DRILL WORKS GOOD. HAS BEEN REBUILT& TESTED FOR PROPER OPERATION HAS 7/16 QUICK CHANGE CHUCK HAS FLAT FACED TOOL COUPLERS BE SURE TO CHECK OUT MY OTHER AUCTIONS FOR OTHER TOOLS SHIPPING TO LOWER 48 STATES ONLY AS IS NO WARRANTY
|
|
Auction includes ONLY SWAGELOK HYDRAULIC SWAGING UNIT 3/4 1210 SERIES MINT Brand: Swager Model: 1210-3/4" SWAGELOK HYDRAULIC MANUAL SYSTEM Specifications: Inches Capacity3/4• Manufacturer Swagelok• Manual Hydraulic Swaging System for tubing• Uses a hand hydraulic pump to do the swaging operation to 3/4" less capacity• Misc Tooling PLEASE BUY WITH CONFIDENCE Please email us if you have any questions The Fine Print: Summary of My Selling Policies Bidding and Buy it now Terms: By placing a bid or using the BUY IT NOW option(if available) you are agreeing to the terms set forth in this auction. Purchaser acknowledges that it is purchasing the assets on an “as is. Where is, with all faults†basis. Purchaser further acknowledges that A-1 Hawk has made no representation or ... morewarranty, statutory, express or implied, with respect to the assets including, without limitation, any representations or warranties regarding the condition of the assets or any representations or warranties that the assets will be merchantable or fit for any particular purpose. The only representation or warranty of any kind whatsoever made by A-1 Hawk is a warranty that A-1 Hawk is the owner of the assets. The purchaser. By bidding or buying it now on this asset, indicates their acknowledgment to the terms of this disclaimer, and waives any and all claims and cause of action it now has or may have in the future against A-1 Hawk arising out of or relating in any way to the assets. Payment: We accept payments through PayPal(preferred) And credit cards by phone(508.A1STUFF) International orders may be accepted on some items and require payment through PayPal only. Domestic Shipping Terms: Lower 48 States Most items will ship by UPS with insurance included. UPS tracking numbers can be provided on request. Some smaller items may ship through the U.S. Postal Service. Please read the eBay ad to determine the shipping service offered. Alaska. Hawaii, APOs, Puerto Rico, Virgin Islands Normally by U.S. Postal Service. Additional shippi
|
|
|
2.5" face. 1/2" Brass nozzle. Liquid filled. Up to 7500 PSI. Please e-mail me any questions about this item. All sales must be paid within 7 days after the auction has ended. We Only ship to the USA. We Accept Pay Pal. Thank you for looking TMRS
|
|
Questions? Call us: 1-877-328-9236. Bosch 0-531-602-611 Diaphragm-Type Accumulator 0531602611 Pressure Cylinder. Manufacturer: Bosch Rexroth Model: 0-531-602-611 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Bosch Rexroth Condition: Used. Comes in non-original packaging. Cosmetically. This item is in fair condition. It has scuffs, scratches, grime, and label residue from previous use. Notes: This item was removed from equipment taken out of service. It has not been tested in our facilities. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Bosch 0-531-602-611 Diaphragm-Type Accumulator Pressure Cylinder, Specifications: Manufacturer: Bosch, Model: 0-531-602-611(0531602611) Type: Diaphragm-type accumulator, ... moreVolume: 0.7 L, PS: 250 bar, T: 80 ºC, N2-Gas: 80 bar, SKU: L48N008 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipp
|
|
|
SMC Air slide cylinders w/5/8"tool plate. Push and retract ports. Used but in great condition. Ready to use. Model: MGPM50- 125 1.00 MPa 4-7/8 in. Stroke. Cylinder Length: 6- 5/8 in. Total Closed: 7- 3/4 in. Total Open: 12- 11/16 in. Cylinder Width: 5- 13/16 in. Cylinder Height: 2.5 in.
|
|
|
Webster Electric Hyd Motor# MC3F1A13D15B Used. Note* We sell in store as well as Ebay. Check Quantity.
|
|
|
SPX FENNER STONE HYDRAULIC POWER UNIT PLASTIC RESERVOIR. THIS WAS TAKEN OFF A POWER UNIT THAT WAS USED FOR A SHORT TIME THEN REPLACED WITH A DIFFERENT SIZE TANK. TANK MEASURES 6-1/2" X 6-1/2" X 20" TANK NECK MEASURES 4-3/4" DIAMETER. COMES WITH BREATHER AND MOUNTING SCREWS. SHIPS TO CONTINENTAL U.S. ONLY. NO P.O. BOXES. PAYPAL ONLY. ANY QUESTIONS PLEASE ASK. THANKS.
|
|
|
Cooler was built in 2010 and put on a machine that never got into service. It had trans fluid in it. Rated for 8 HP of heat removed. Rated 377 psi and max temp 250 degrees F 1/3 hp 115-230 volt single phase Will ship. It can go UPS 2 available. Identical I'm 10 miles west of Milwaukee if you would like to inspect or pickup. 53151
|
|
THIS IS A LARGE 5" DIAMETER X 3 1/2" TALL LIQUID NITROGEN PRESSURE GUAGE MEASURING IN U.S. GALLONS! THE TAGS AND SIGNEAGE ON IT READ: U.S. GALLONS LIQUID NITROGEN(SCALE LOGO) H& H INDUSTRIAL INSTRUMENTS INC. 450 LANTANA CURPUS CHRISTI. TEXAS 78408 MAX. OPERATING PRESS. 500PSIG CAPSUNELIC 4015CLT CLEANED FOR LIQUID/GAS BEARING SERVICE BY: PBM DATE: 91-11-05 6680-01- 157-5535 P/N: 8222470-10 MFR 4U807 DWYER INSTRUMENTS, INC. MICH. CITY, IND. U.S.A. WITH MULTIPLE PAT. NUMBERS, THE LARGEST BEING 4,030,365.it seems to be working fine, insurance is included in the shipping calculator for your protection and mine.THANK YOU FOR LOOKING! Check out my! Be sure to add me to your! On Jun-04-13 at 18:23:27 PDT. Seller added the following information: Click to view supersized image Click to ... moreview supersized image Click to view supersized image Click to view supersized image Click to view supersized image
|
|
|
Eaton/Airflex 145107BG Rotor Seal Size C2! WOW! This item is used. Tested, in good working condition! Pictures above are of actual item for sale. Location W2-Q61 Lister: MM. If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store! Powered by
|
|
|
HOERBIGER ORIGA RODLESS CYLINDER USED ITEM FULLY TESTED AS NEW CONDITION 40 x 300 NEED FURTHER INFO OR PHOTOS JUST SEND ME A MAIL PNEUMATIC SERVICES YORKSHIRE FOR ALL YOUR ON-SITE PNEUMATIC NEEDS CONTACT- pneumaticsuk@gmx.com MOBILE 07538321551 FOR ALL YOUR ON-SITE PNEUMATIC NEEDS ON-SITE PNEUMATIC SERVICES TO THE FOOD AND ENGINEERING INDUSTRY E-BAY UK LARGEST STORE FOR PNEUMATIC EQUIPMENT 25 YEARS WITHIN THE PNEUMATIC INDUSTRY Posted with
|
|
THIS LISTING IS FOR A ENERPAC P-392 HYDRAULIC HAND PUMP. INCLUDED A 6 FOOT HOSE MODEL HC7206 PUMP SHOW SOME MINOR SIGNS OF USE BUT WORKS PERFECTLY. TESTED AND READY TO WORK. GUARANTEED. PUMP IS IN GREAT CONDITION 8 OUT OF 10 COSMETIC 100 PERCENT FUNCTIONAL Lightweight. Compact design Lower handle effort minimizes operator fatigue Internal pressure relief valve for overload protection Large oil capacities to power a wide variety of cylinders and tools Durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base No. of Speeds = 2 Useable Oil Cap. = 55.0 cu in[Max] Operating Pressure@ Volume/1Stroke = 200 psi@ 0.687 cu in. 10000 psi@ 0.151 cu in Operating Oil Displacement Per Stroke(1st Stage) = 0.687 cu in Oil Displacement Per Stroke(2nd Stage) = 0.151 cu in Maximum Handle ... moreEffort = 93 lb Length = 21 in Width = 4 3/4 in Height = 7 in Type = Two-Speed Wt. = 9 lb, QUESTIONS CALL 540-775-0495. UPSTAIRS SHELF. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
FESTO EX PROXIMITY SWITCH USED STOCK. UK LIST £46 PNEUMATIC SERVICES YORKSHIRE FOR ALL YOUR ON-SITE PNEUMATIC NEEDS CONTACT- pneumaticsuk@gmx.com MOBILE 07538321551 ON-SITE PNEUMATIC SERVICES TO THE FOOD AND ENGINEERING INDUSTRY E-BAY UK LARGEST STORE FOR PNEUMATIC EQUIPMENT 25 YEARS WITHIN THE PNEUMATIC INDUSTRY Posted with
|
|
|
Brand: CIRCLE SEAL Condition: Used Model: SV432T32P8P43 Mounting Type: Threaded Coil Voltage: 115 V-AC Port Size: 1/2 IN Weight: 8 lbs Dimensions: 7 X 4 X 3 SKU: B217367 Category: Valves· Solenoid Valves Additional Notes:
|
|
This is a large lid torquing machine. 1500 PSI made by Orton Industries, now Hydradyne Company, unit is heavy, estimated 8,000- 9,000 pounds. NOTE: Cannot accept CC or Paypal payments on this item, other conventional payments are accepted. NOTE: I reserve the right to end this auction at any time whether it has bids or not since item is for sale locally. Offering a 14 day right of return if not satisfied, full refund less shipping. Cell phone: 865 705 0416 Please don't let my low feedback make you reluctant to bid. This Ebay seller site was recently set up to fund my Grandson's college education, I have 2 other Ebay seller sites with over 700+ positive feedbacks and 0 negative, please don't hesitate to call and I will give you the details. If you are a dealer of scientific and ... moreindustrial equipment, chances are that I have sold to you in the last 9 years. Please call if you have questions 865 705 0416. I am not at the computer much. Direct email is: if you do not get a fast response through Ebay system.
|
|
PARKER HYDRA FLARE FLARING FLARER MACHINE WITH DIES and ENERPAC PUMP NICE UNIT PARKER HYDRA FLARE FLARING FLARER MACHINE WITH DIES and ENERPAC PUMP NICE UNIT. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE ... moreNUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400 jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13fe71d57d1-0xf9-
|
|
Questions? Call us: 1-877-328-9236. Haldex 3-Hp Electric Hydraulic Power Unit Pump Baldor Motor w/Reservoir. Manufacturer: Haldex Model: Unknown Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Haldex Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: We bypassed the control box and ran the motor/pump assembly directly. They ran very smoothly with no problems. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Haldex 3-Hp Hydraulic Power Pump, Specifications: Pump: Manufacturer: Haldex Hydraulics, 100404/ 1003293, Tank Dimensions(approx. 24"L x 10"H x 11"W, Motor: Manufacturer: Baldor, Spec. 35K531-186, ... more3 Hp, 3 Phase, 60 Hz, V: 208-230/ 460, A: 8.4-8/ 4, 3450 RPM, Frame: 56YZ, Solenoid Valve: Manufacturer: Vickers, Model: Unknown, SKU: N26L003 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. This item will be shipped on a pallet via LTL Freight. Please fill out to receive a shipping quote. Buyer pays for all shipping costs. This cost includes professional packing& insurance. Handling time is two to three business days after receiving cleared payment. Tran
|
|
This auction is for(1) Parker Hozembler#432-115V Hydraulic Hose Assembly Machine Mounted on a Three Drawer Lista Industrial Cabinet with Locking Caster Wheels. This Hose Machine works great and is in excellent used condition and come as pictured. Including all of the reusable fittings, hose lube, chuck adapters, bolts and a nice heavy duty Lista cabinet. These list for over $6.200 without the cabinet or fittings, so here is a chance to save big. Freight shipping will be needed as this is just under 500 lbs. Local pickup is fine. If the shipping price seems too high just send me an email with your shipping address and let me know if you have a loading dock or forklift available and I will get a shipping quote with the best price possible. Wisconsin residents must pay 5.5% sales tax. Unless ... moreproof of exemption is provided. Thanks. And good luck bidding.
|
|
MODEL# PS-3000. NPT: 1/4" VAC: 115. PSI: 3000. This item/machine is for sale locally. So the auction/listing may be cancelled due to a local sale. Please call us if you have any question at 214-631-1434, arrowmachinery@sbcglobal.net Items ship from Dallas. TX. or Lubbock, TX. via UPS Ground. www.arrowmachinery.com Payment Curnterenterprises aka Lubbock Machine Tool aka Arrow Machinery Sales accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks as payment of goods purchased in our store. Please send payment to 6310 Singleton Blvd. Dallas, TX. 75212) All payments must be received within 7 business days. Bidders can call 214-631-1434 or arrowmachinery@sbcglobal.net for further information. All buyers residing in Texas add 8.25% sales tax. Shipping and Handling ... moreBuyer pays shipping charges based off of UPS rates plus any crating or handling fees. Fees apply on individual basis please see item description for information about any fees) Orders being shipped to P.O. Boxes will be delivered by United States Postal Services(USPS) Note: Weight restrictions may apply in some cases. Buyers can check for shipping rates at www.usps.gov or www.UPS.com) Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Curtnerenterprises aka Lubbock Machine Tool aka Arrow Machinery Sales: offers a group of carriers that can quote you with an estimate of shipping charges for all items. Check www.conway.com. Www.roadway.com. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. Buyers are responsible for payment of all Shipping and Handling charges on all items. Terms and Conditions We guarantee the items are described as accurately and honestly as possible in the description however all items are sold as is unless otherwise specified. All payments are to be received within 7 days of the end of the auction. If you do not pay for them in the specified amount of time we have to file
|
|
Legacy L2500 Lubrication Accessory Kit Item# II-V-II Requirement Name: Requirement: COMPONENT QUANTITY 20 NONSUPPLY ITEMS AND QUANTITIES 58039 KDS RIGHT ANGLE COUPLER 1; 58039 KDN NEEDLEPOINT COUPLER 1; 58039 KDF21 FLEXIBLE EXTENSION 21.000 IN. 1; 58039 J65 FILLER ADAPTER 1; 58039 KY GREASE COUPLER FOR PRESSURITE GUN 1;58039 KZSNR 3 IN. NEEDLEPOINT COUPLER 1; 58039 KDE8 8 IN. RIGID ~1 EXTENSION 1; 58039 KZHY HYPODERMIC NEEDLE COUPLER 1; 58039 KZDXL LONG NEEDLEPOINT COUPLER 1; 58039 FL2222 FLASHLIGHT 1; 58039 DXL LONG NEEDLEPOINT ONLY 1; 58039 KDF13 13 IN. FLEXIBLE EXTENSION 1; 58039 EXT1428 1/4 IN. 28 EXTRACTOR 1; 58039 EXT 18 1/8 IN. ~2 EXTRACTOR 1; 58039 KZD NEEDLEPOINT COUPLER 1; 58039 KDR COUPLER RIGH ANGLE 1; 58039 KZX LONG ZERK COUPLER 1; 58039 KGR BUTTONHEAD COUPLER 1; 58039 KSR BUTTONHEAD ... moreCOUPLER 1; 58039 AIM III PLASTIC CASE 1 Condition: one missing piece. Sight discoloration. Most of the pieces appear to be never used. It looks like it sat on a shelf for many years untouched. Please see my other auctions. I will combine shipping for additional savings! Thank you for looking! Posted with
|
|
|
Item is believed to be good. Untested no way of testing this unit. Bought out of closed plant in parts crib
|
|
|
Ohio Oscillator H12-190-MSI-C Rotary Actuator 2000PSI S/N 084-360 MAX PRESSURE 2000 PSI VIEWS AS SHOWN: FRONT. TOP and BACK. Note that this includes fittings and tubing as shown.
|
|
ebay template LOT 4 SMC VQ1100N-5 SOLENOID 24VDC 0.1-7MPa 5 PORT SOLENOID VALVE UNITS PLUG IN. This AUCTION is for LOT 4 SMC SOLENOID 24VDC 0.1-7MPa 5 PORT SOLENOID VALVE UNITS PLUG IN Part: VQ1100N-5 Auction is for FOUR(4) SOLENOID UNITS as pictured and described. PULLED FROM WORKING ENVIRONMENT. SOLD AS IS NO RETURNS ACCEPTED. We will attempt to ship your item within 24 hours after payment has been received.excluding weekends) We ONLY ship to the USA lower 48 states. Shipping rates quoted in the auction are for the lower 48 states Only. ONLY items under 3 pounds can be shipped to a PO Box. Applicable sales taxes will be added to shipments within the state of Kentucky. Local pickups at our Florence. KY facility are always welcome. We do not charge any pickup fees. Kentucky Sales Tax is due ... morefor all local pickups. We accept Paypal. Or cash(for local pickups) ONLY. Winning bidder must make payment arrangements within 10 DAYS. If payment has not been received within 10 DAYS of auction close. The item will be relisted. This item comes with NO Warranty. This item is sold AS IS. with NO RETURNS. It is our goal to turn every bidder into a repeat buyer. Unless specifically stated otherwise. All merchandise is GUARANTEED to be as described and to be in working order upon arrival. Powers Your Online Marketplace Make a breeze with Kyozou Software
|
|
|
Description SquareTrade © AP6.0 You are bidding on a NEW TSUBAKIMOTO CHAIN CO. SHOCK DAMPER MODEL DP002A025. This is a very nice unit in excellent condition and it is fully guaranteed. Please see picture of tag for more information Shipping in the Continental US is $9.90. I have very competitive rates for our always welcomed International bidders.
|
|
ebay template LOT 2 SMC MGPM12-10 ALUMINUM AIR CYLINDER GUIDE ROD PLATE COPPER FREE PNEUMATIC. This AUCTION is for LOT 2 SMC ALUMINUM AIR CYLINDER GUIDE ROD PLATE COPPER FREE PNEUMATIC Part: MGPM12-10 Auction is for TWO(2) AIR CYLINDER UNITS as pictured and described. PULLED FROM WORKING ENVIRONMENT. SOLD AS IS NO RETURNS ACCEPTED. We will attempt to ship your item within 24 hours after payment has been received.excluding weekends) We ONLY ship to the USA lower 48 states. Shipping rates quoted in the auction are for the lower 48 states Only. ONLY items under 3 pounds can be shipped to a PO Box. Applicable sales taxes will be added to shipments within the state of Kentucky. Local pickups at our Florence. KY facility are always welcome. We do not charge any pickup fees. Kentucky Sales Tax is ... moredue for all local pickups. We accept Paypal. Or cash(for local pickups) ONLY. Winning bidder must make payment arrangements within 10 DAYS. If payment has not been received within 10 DAYS of auction close. The item will be relisted. This item comes with NO Warranty. This item is sold AS IS. with NO RETURNS. It is our goal to turn every bidder into a repeat buyer. Unless specifically stated otherwise. All merchandise is GUARANTEED to be as described and to be in working order upon arrival. Reach your goals with Kyozou eBay Selling Tools
|
|
|
SPX Power Team. Electric Hydraulic Pump. Pump was used for test equipment, 4 way valve, 2 speed, 1/4 hp motor, 110 volts, 10000 psi, List Price $1,600.00 Save Hundreds, Shipping is FREE.
|
|
|
Enerpac PER-3032A H-Frame Hydraulic Press Condition: Used. Item has not been tested Manufacturer Enerpac Model PER-3032A Capacity 30Ton MotorHP 1.5 Volts 120 Phase 1 Pump Specifications PSI CU. IN/Min 0 720 200 700 5.000 62 10.000 62 Machine being sold"As is. Where is. Current machine isn't under power. But feel free to ask about options to inspect under power. We are located in Sun Valley. CA zip code: 91352 Contact me at slavashmelev@yahoo.com Local delivery is available for additional fee.
|
|
|
Metabo Hydraulic Hammer Drill. Good Used Condition! I am selling as is. I have no way to test. I cant see anything wrong with it other than it needs cleaning up. This item will be shipped with insurance.
|
|
|
Up for auction is a used Houston vibrator in good cosmetic and working order. Any questions feel free to email
|
|
|
Lot of 6 vintage used 1/4" OD tubing union fittings. Posted with
|
|
|
Lot of 3 vintage 1/4 OD tubing push to connect Legris Tee fittings Posted with
|
|
|
Lot of 7 vintage Legris 1/4 NPT 1/4" OD tubing push to connect elbows. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14364d72809-0xec-
|
|
17-3/4X19-3/4X13-1/2" Reservoir Hydraulic Oil Tank For Power Unit SPECIFICATION Bullseye Catalog# 39937 Weight: 90 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and ... moremake an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR clic
|
|
Click thumbs to Enlarge Any additional photos will be below This Manual Hydraulic Installation tool is used and in good condition. Perfect for everyday use on the job. Comes with everything pictured. Have a great day! Auction Includes: List of accessories Huck International Manual Hydraulic Installation Tool Case Adaptors Sku: R6-9596-M-0103. Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address your card will be declined. Taxes: 5.0% Sales Tax to Wisconsin buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails ... moreplease check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: We offer local pickups. Please contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time. If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics.
|
|
Description THOMAS TA-0040-V VACUUM PUMP MAGNETEK 120 VAC MOTOR PART NUMBER 991090 MFG. DATE 3/29/94 MADE IN USA PLEASE SEE THE PICTURES FOR MORE INFORMATION. THANK YOU Payment is Due Within THREE Business Days of the auctions end. Paypal payments will be accepted only from USA accounts and will be shipped to Confirmed Addresses only. NO PO or APO Addresses. NO SHIPPING BEYOND THE LOWER 48 USA unless arrangements are made with me before the auctions end. Cash or Paypal are required for local pickup. Shipping: Unless other arrangements are made with me before the end of the auction most packages will ship via FedEx ground to the lower 48 USA. I will not ship to Unconfirmed. Post Office, or APO Addresses. If arrangements are made for overseas shipping the cost will be estimated based on the ... moresize and weight of the item. Local pick up is welcome. No refunds of any shipping costs. Sales Tax will be added to all sales that are shipped to or picked up within the State of California. I. Millsrv have used my best efforts to inspect the item(s) for sale, most are used items) and write descriptions and supply pictures that fairly and adequately depict the type, condition and image of the merchandise at the time of sale. I, millsrv make no express or implied warranties or representations regarding the condition or suitability of the goods and specifically disclaim any express or implied warranties, including but not limited to any warranty of merchantability or fitness for use. Although some items my have a return allowed policy, all items are Sold AS-IS. I constantly search Swap Meets. Flea Markets, Estate, and Garage Sales for all kinds of great merchandise. You never know what you might find listed on my Ebay Auctions or in my Ebay Store. If you are looking for something unusual and cannot find it, please let me know, and I just may be able to locate one. Please feel free to contact me if you have questions about any of my items or are looking for that hard to find item. I sincerelly appreciate your business! Thank you
|
|
|
Nice used Dotco in line grinder up for auction. Model# 12L2802-01{I believe} 6 hp 18,000 rpm. Please see my other auctions for more great deals on Quality tools. Thanks and happy bidding
|
|
Please read item description thoroughly. Pictures are of the actual item(s) in the auction. Please see pictures for wear and additional information. Don't hesitate to contact us! We are available Monday- Friday. 9am- 7pm CST. Phone- 713-534-7296 This listing is for a used Wilkerson pneumatic regulator + lubricator set in good condition. Both pieces have some rust spots. Typical-light scratches, and general wear. No additional items are included. Models: B18-04-FH00 L18-04-KL00*Payment must be received within 2 weeks of auction ending. We only accept payments through PayPal. PayPal address needs to be confirmed. Shipping quote for continental US. Hawaii. Alaska please ask for quote! Will combine shipping; just ask for invoice. We no longer ship internationally. Including anywhere outside ... morethe USA. If there is a problem with your purchase. Item was not as described, not functioning, or you changed your mind, please notify us! 3 days to notify. No refunds on shipping. Please let us know if you have any problems at all. Local pickup available if paid through PayPal prior to pick-up(no shipping charge) Address- 2131 S Richey Rd- Pasadena. TX 77502 We are located at the corner of Richey Rd and Allen Genoa Rd. Across from Walgreens. Powered by
|
|
|
YOU ARE BIDDING ON YANMAR ELECTRIC START DIESEL HYDRAULIC POWER PACK. THE MOTOR IS A 10HP WITH 2500 PSI ALSO 4.5 PER MIN. THE ITEM IS USED BUT IN GOOD WORKING ORDER. PLEASE LET ME KNOW IF YOU HAVE ANY QUESTIONS
|
|
|
THIS IS A VINTAGE SCHAEFFER&BUDENBERG NEW YORK TACHOMETER. PAD'T NOVEMBER 13TH 1883. THIS WAS GIVIN TO ME FROM MY FATHER. HE WAS A COLLECTOR. PLEASE REFER TO PICTURES FOR CONDITION!
|
|
|
3/8" Wilkerson Pneumatic Regulator with Pressure Gauge. Tool oiler& line dryer. Missing Knob. As pictured.
|
|
1/4" Parker Filter Model: 8C02N-0A1-BX-L925 Max Pressure Rating: 250 psig@ 130°F Used Surplus. Excess Inventory Listing Includes Only What is Shown in Pictures See Pictures for Information! No Way to Test Items Money Back if DOA Will Combine Ship! Bitter End Trading is an asset recovery wholesaler specializing in new and used surplus industrial equipment. Bitter End Trading is not a representative of any manufacturer listed; all names. Logos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. Bitter End Trading is not liable for ... moreany products sold. The customer is responsible for proper testing, installation and use of equipment purchased. No warranties are expressed or implied. Combined Shipping Policy We will combine shipments to reduce costs for customers purchasing multiple items. After customers have completed their mulitple purchases they should request an invoice. We will package and weigh the entire purchase and provide an invoice. Including shipping and handling. Shipping rates are generated using the EBAY shipping calculator. Handling charges per shipment are determined by size of the item. As well as additional packing requirements on delicate instruments. See individual item for cost. Domestic Shipping. We ship using UPS and FedEx to provide en-route package tracking. International Shipping We ship using UPS. FedEx and USPS. Items shipped by UPS and FedEx are more efficient and provide customers with en-route tracking. Items shipped by USPS cannot be tracked. International buyers are responsible for any and all applicable customs. Duties, taxes and fees. Freight Shipping We have very competitive rates for shipping freight. All items are palletized and shrink wrapped before they leave the warehouse. If shipping to residential address. There
|
|
VICKERS 10 PSID 6.2 BAR INDICATOR KIT. P-230296-01B VICKERS INDICATOR KIT USED CONDITION P-230296-01B 10 PSID. 6.2 BAR ITEM SHOWN IS A REPRESENTATIVE UNIT, CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 53. KF SW 2 01/14/14 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety ... morebefore bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours!
|
|
As pictured used. Has bent pins. But everything else looks to be in good condition. Untested. Free Shipping! Thanks for looking! Shipping: We make every effort to ship your item within one(1) business days unless otherwise stated. We will combine shipping on multiple items for efficiency. International Shipping: We will ship this item anywhere in the world. Please inquire about shipping charges to your country. We reserve the right to refuse to ship to some countries. Satisfaction Guaranteed: Our objective is your total satisfaction. Please read the complete listing before making a purchase. If you are not satisfied with your purchase for any reason. Let us know and we'll make it right. Refunds or exchanges will be made for any item returned within 30 days. Returned item must be in same ... morecondition as when delivered. Buyer is responsible for return postage. Feedback: Our goal is a 5-Star rating on every transaction. If you are not satisfied with your purchase in any way please give us an opportunity to make it right before leaving feedback. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-143a37abf52-0x103-
|
|
Product Specifications. Brand: CUNO, Condition: Used, Model: NA, Fitting Size: 3/4 IN, Weight: 3 lbs, Dimensions: 15 x 5 x 5 in, SKU: B321525(DMM) Category: Pneumatics· Pneumatic Filters, Additional Notes: 30-125PSI 40-100F, Product Photos. $50 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern ... moreTime. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is not responsible for technical specifications or fitment/applicat
|
|
856-881-3185 SKU: AFG239 Spx Power Hydraulic Gauge 15000psi 1034bar 9040. Brand: Spx Power Team Condition: Used Model: 9040 Lot# AFG 239 5.6.A We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which ... moreare charged by the carrier. This is something we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To pl
|
|
|
THIS IS PART OF AN ESTATE.IT LOOKS UNUSED.BUT I HAVE NO WAY TO CHECK SO SELLING AS IS.I WILL LIST SOME OTHER BRASS ITEMS FROM SAME ESTATE.SEE PICTURES FOR DESCRIPTION.OVERALL LENGTH CLOSED 5 1/2" AND OPENED 6 1/2"
|
|
|
AARD VARK SPARKS SSP 316 Stainless Steel 90 Compression Tube Fitting 1/2" Threads No Cross-Threading All Items: I offer a money back guarantee. If you are not satisfied w ith your purchase. I will refund your purchase price. Thank you for looking at my items! AARDVARK SPARKS AARDVARK SPARKS FEATURES THE LOWEST PRICES ON THE INTERNET! MONEY BACK GUARANTEE IF NOT SATISFIED!
|
|
|
AARD VARK SPARKS Stainless Steel& Galvanized Quick Connect Fitting 11/16" Male Threads All Items: I offer a money back guarantee. If you are not satisfied w ith your purchase. I will refund your purchase price. Thank you for looking at my items! AARDVARK SPARKS AARDVARK SPARKS FEATURES THE LOWEST PRICES ON THE INTERNET! MONEY BACK GUARANTEE IF NOT SATISFIED!
|
|
|
AARD VARK SPARKS Used Galvanized Piping Fittings& Brass Quick Connects 3/4" Fittings and Pipes 1/2" Quick Connect Attached to Piping 3/4 inch Quick Connect Male Adampted to 3/4 inch All Items: I offer a money back guarantee. If you are not satisfied w ith your purchase. I will refund your purchase price. Thank you for looking at my items! AARDVARK SPARKS AARDVARK SPARKS FEATURES THE LOWEST PRICES ON THE INTERNET! MONEY BACK GUARANTEE IF NOT SATISFIED! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-143b4ce252b-0x100-
|
|
856-881-3185 SKU: AFH181 1515-700 405R Romheld Germany Hydraulic Element. Condition: Used Model: 1515-700 405R Lot# AFH 181 8.3.C We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged ... moreby the carrier. This is something we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order
|
|
856-881-3185 SKU: AFH175 Numatics 081RS331J000000. Brand: Numatics Condition: Used Model: 081RS331J000000 Lot# AFH 175 8.3.C We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by ... morethe carrier. This is something we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by ph
|
|
|
Millipore Gas Line 25 mm Filter Holder Cat No XX4002500 stainless steel Specifications for this item Brand Name Millipore Mfr Part# XX4002500 Specifications For 25mm Filter Diameter 7 Available.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143b4ce25a8-0x106-
|
|
HYSON 160 MM STROKE. 130 BAR NITROGEN GAS SPRING NP-750-160 SW Search HYSON NITROGEN GAS SPRING USED NP-750-160 SW 160 MM STROKE. 130 BAR ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. 4066 DJ SW 10 1112013 REVISION AKR ADDED 1 ITEM 3/6/2013 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant ... moreincrease in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us with
|
|
Inventory Number: 05130550006 Manufacturer: Description: VACUUM/PNEUMATIC VALVE ASSEMBLY.08-156-4,SVP452200,4KA221-06G Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN, REMOVED FROM A MACHINE BEING SCRAPPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged it
|
|
SMC Magnetically coupled Rodless Cylinder CDY1S32H-300 32 Bore 300 Stroke PLEASE NOTE Final prices include VAT. A VAT invoice will be enclosed with the item SMC Rodless Pneumatic Cylinder CDY1S32H-300 Body Mounted Used but in good working condition. 32mm Bore 300mm Stroke The overall length is 460mm. you need any more dimensions let me know. For more information on this item please have a look on the link below which will take you to the smc page. Double acting(It will push or pull) It is made of alluminum. Weight is around 5kg EMAIL FOR PRICE OF POSTAGE FOR OVERSEAS BUYERS. We are registered in the UK for VAT. An invoice detailing the VAT content of your purchase will be sent with the parcel. We accept paypal. Cheque or bank transfers. If you want to pay by bank transfer please contact us ... morefor details. We cannot accept direct credit or debit card payments. We prefer paypal from overseas customers. If you want to pay by other means please contact us before commiting yourself to purchasing the item. We aim to dispatch the day after payment is recieved. If you need the equipment urgently please let us know and we will try and give it priority. We run a Parcelforce account so that we can send heavy or bulky items at a lower cost than is offered by The Royal Mail. Parcelforce are not part of the Post Office& charge us a premium to send items to the following postcodes. KA27-28. KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE, BT, IM, TR21-25& The Channel Islands. If you are in these areas please contact us& we will give you a specific cost for the item. Everyone hates having to pay for postage but it is unfortunately a necessary evil. We keep your costs to a minimum by'recycling' as many materials as possible however there will always be materials to be bought. Unlike many other sellers we don't charge you for the time taken to wrap things up. There is also a cost involved in renting& buying consumables for the franking machine. So if the cost shown on the stamp is less than the price t
|
|
Product Specifications. Brand: BALSTON, Condition: Used, Model: 92, Max Pressure: 250 PSI, Fitting Size: 3/8 IN, Weight: 1 lbs, Dimensions: 5 x 3 x 3 in, SKU: B322020(PGC) Category: Pneumatics· Pneumatic Filters, Additional Notes: 100-12 ELEMENT, Product Photos. $40 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off ... moreis 3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is not responsible for technical specificatio
|
|
|
2002 model. Used. Refund if problems arise within 15 days. Unknown history but in working order. Posted with
|
|
Manufacture Fairchild Model: 80451 Description: Fairchild Model 80D 80451 Multi-Stage Pressure Regulator 100PSI 250PSI Max Condition: used good Details: vac11/test/2 Extra Info: 2lbs Please Fully Read our Policy If it's NOT in the picture. Or in the description, then it will NOT be included in this sale. This applies to power cords, cables, manuals and A/C adapter! If you experience a problem Please contact us FIRST! We strive to do our best to work with customers to resolve issues. All of our auctions include notes on the condition of the item(it may require cables or plugs or even more components to function) If it is not in the picture it is Not included. We do stand behind what we sell. We never intentionally sell defective products unless it is stated as such in the auction(DOA. For ... morerepair or parts) If you have a problem with a product, please contact us right away(within 14 days) If an item is listed as"AS-IS" then it is simply that, AS-IS" and can't be returned. There will be no refunds of any kind on AS-IS items. If auction says"parts or repair" the item is NOT Functioning properly, item is described as best as we can, and has No Returns No Refunds. We acquire our equipment from reliable sources. Many of our items are tested in-house. Some items are not tested, either because we trusted the source of the equipment based on their history with us, or because we are unable to test the equipment(this would be because we do not have proper equipment to test or lack of knowledge in the product itself) Although we welcome your questions and inquiries. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases, all information that we have available to us is included in the text of the auction. Any other questions email us or call! Thanks! Payment and Shipping We accept credit cards over the phone or through eBay check out. Fed-Ex has scheduled pick-up's daily Mond
|
|
Founded by: Roger O. King I on July 1. 1970 Currently over 50.000 items in liquidation at our 100,000 sqft warehouse& on our website by clicking on Our Asset# DRW27/ 014 Qty available: 1 Taisei Kogyo ULTRA FINE Hydraulic Oil Filter Suction Gallery Photo Customer Service Contact below THERE IS NO FREE SHIPPING. EBAY IS FIXING AN ISSUE AND IT SHOWS FREE SHIPPING, THERE IS NO FREE SHIPPING ON THIS ITEM. IF YOU NEED A SHIPPING QUOTE YOU MUST EMAIL US VIA EBAY FIRST BEFORE PURCHASE, OTHERWISE YOU ARE AGREEING TO THE SHIPPING CHARGES UPON PURCHASE. Normal 0 false false false EN-US X-NONE X-NONE Appraised Value: $395.00 NEW REPLACEMENT COST OR WHEN NEW: $1.200.00 Manufactures Tag: Manufacturer: Taisei Kogyo Model: ISH-04-100W Serial# OMW Year: N/A HP/Amp/KW/KVA: Voltage: Phase: Other Info: General ... morePhotos: Background Background is our attempt to answer buyer questions in advance or to give a little history as represented to us. We are not making any representations simply passing along 3rd party info. Inspections are our findings only and not representation of fitness for a purpose Used looks good Inspection See our 7 day DOA Guaranty! Factory Information* King Surplus is not making any representations. Warranty of merchantability or any implied warranty of fitness for a particular purpose. For reference only: Taisei Kogyo Co. Ltd Contamination Control& Fine Filtration Hydraulic systems are contaminated by dirt and foreign objects. Contaminants circulate in the system causing unnecessary wear and/or premature failure of components. A hydraulic filter eliminates contaminants in the system resulting in an extended service life of the components and the system as a whole. Kinetic Technologies is your distributor and source for Taisei Kogyo products: We offer Assistance Shipping& Packaging Quotes We no longer accept direct payment for packaging or shipping due to new commission fees for these services by eBay More than a dozen shippers with in 2 miles of our facility Packing Required for safe shipment& estima
|
|
USED- TESTED& GUARANTEED) LINDE HYDRAULIC PUMP TYPE HPV105-20L CATERPILLAR Normal 0 false false false EN-US X-NONE X-NONE*AUCTION TERMS* PAYMENT OPTIONS: Payment is expected within 7 days of the auction closing. Although we greatly appreciate buyers that figure out their own shipping. And pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING AND HANDLING: UNLESS POSTED AS FREE SHIPPING. BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. ON ITEMS THAT ARE SOLD AS FREE SHIPPING: ANDERSONEQUIP LLC IS RESPONSIBLE FOR THE INITIAL SHIPPING COSTS ONLY. ALL OTHER DUTIES AND CHARGES ARE THE RESPONSIBILITY OF THE BUYER. ITEMS ABOVE 150 LBS. WILL BE SHIPPED VIA FREIGHT CARRIER. SHIPPING AND HANDLING FEES MAY ... moreVARY BY WEIGHT AND SPECIAL MATERIALS NEEDS. ANDERSONEQUIP LLC CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT. WITH RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. INTERNATIONAL BUYERS POLICY: ATTENTION INTERNATIONAL BUYERS. INCLUDING CANADA WE ONLY SHIP USPS PRIORITY MAIL INTERNATIONAL AND UPS WORLDWIDE SAVER! PLEASE KEEP THIS IN MIND WHEN BIDDING ON ITEMS. AND FEEL FREE TO CONTACT US FOR AN INTERNATIONAL SHIPPING QUOTE. ON INTERNATIONAL SHIPMENTS. WE WILL NOT SHOW ITEM VALUED BELOW THE ACTUAL PURCHASED PRICE(S) AND/ OR MARK THE ITEMS PURCHASED AS GIFTS. GOVERNMENT REGULATIONS PROHIBIT THIS BEHAVIOR. FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. ANYONE LEAVING NEGATIVE OR NEUTRAL FEEDBACK WILL BE PLACED ON OUR BLOCKED BIDDER LIST. POSITIVE FEEDBACK WILL BE LEFT UPON CLEARING OF PAYMENT. EXTRA AND LEGAL INFORMATION: PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ANDERSONEQUIP LLC AN
|
|
USED- TESTED& GUARANTEED) CATERPILLAR EXCAVATOR HYDRAULIC SWING PUMP CAT PART NUMBER 295-9678 Normal 0 false false false EN-US X-NONE X-NONE*AUCTION TERMS* PAYMENT OPTIONS: Payment is expected within 7 days of the auction closing. Although we greatly appreciate buyers that figure out their own shipping. And pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING AND HANDLING: UNLESS POSTED AS FREE SHIPPING. BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. ON ITEMS THAT ARE SOLD AS FREE SHIPPING: ANDERSONEQUIP LLC IS RESPONSIBLE FOR THE INITIAL SHIPPING COSTS ONLY. ALL OTHER DUTIES AND CHARGES ARE THE RESPONSIBILITY OF THE BUYER. ITEMS ABOVE 150 LBS. WILL BE SHIPPED VIA FREIGHT CARRIER. SHIPPING AND ... moreHANDLING FEES MAY VARY BY WEIGHT AND SPECIAL MATERIALS NEEDS. ANDERSONEQUIP LLC CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT. WITH RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. INTERNATIONAL BUYERS POLICY: ATTENTION INTERNATIONAL BUYERS. INCLUDING CANADA WE ONLY SHIP USPS PRIORITY MAIL INTERNATIONAL AND UPS WORLDWIDE SAVER! PLEASE KEEP THIS IN MIND WHEN BIDDING ON ITEMS. AND FEEL FREE TO CONTACT US FOR AN INTERNATIONAL SHIPPING QUOTE. ON INTERNATIONAL SHIPMENTS. WE WILL NOT SHOW ITEM VALUED BELOW THE ACTUAL PURCHASED PRICE(S) AND/ OR MARK THE ITEMS PURCHASED AS GIFTS. GOVERNMENT REGULATIONS PROHIBIT THIS BEHAVIOR. FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. ANYONE LEAVING NEGATIVE OR NEUTRAL FEEDBACK WILL BE PLACED ON OUR BLOCKED BIDDER LIST. POSITIVE FEEDBACK WILL BE LEFT UPON CLEARING OF PAYMENT. EXTRA AND LEGAL INFORMATION: PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD A
|
|
HAND PUMP IS USED: INCLUDES NEW GAUGE. ADAPTOR, 10,000 PSI ENERPAC HOSE, AND MALE ENERPAC COUPLER 400 WITH DUST CAP. NICE SET UP Hydraulic Hand Pump. Reservoir Capacity 155 Cubic Inches, Maximum Pressure@ First Stage 400 PSI, Maximum Pressure@ Second Stage 10000 PSI, NPT Port 3/8 Inch, Speed Two, Displacement per Stroke Ist Stage 2.4 Cubic Inches, Displacement per Stroke 2nd Stage 0.151 Cubic Inches, Length 21 3/4 Inches, Height 9 Inches, Width 7 Inches, Composite Reservoir Non-conductive fiberglass handle for operator safety Internal pressure relief valve for overload protection The shipping on theses is a bit much. I think so) so let me explain: I NOW PUT INSURANCE ON THESE ITEMS DUE TO THE RASH OF POSTAL LOSSES I HAVE INCURRED LATELY. THE SHIPPING IS ONLY40 but the insurance cost 18.00 ... moreso that's why. SORRY BUT THIS HELPS BOTH OF US IN THE END. I WILL PAY HALF ON THE INSURANCE AND YOU WILL PAY THE OTHER HALF Posted with
|
|
|
Lot of cylinders clamps switches ALLENAIRE.SCHRADER BIMBA MEAD a lot of it looks new I am sure its all in good working order although I have not tested the stuff. Check out my!Be sure to add me to your!
|
|
|
8 TON CATERPILLAR HYDRAULIC HAND JACK. COSMETIC WEAR DOES NOT WORK. OWN A PEICE OF CAT HISTORY!
|
|
|
The gauge measures 3 5/8” in diameter. Not sure what it was used for. The text on the face of the gauge says. OWATONNA TOOL COMPANY; OWATONNA MINN; NO. YA-1; POWER TWIN; OTC. See the pictures. Email with questions or to request more pictures. I charge a flat rate for shipping including insurance. You are buying as described. As seen, as is. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143bb147848-0xf1-
|
|
18090 Wolf Road Orland Park. IL 60467 FESTO DSN-25-40-PPV Powered by Title: FESTO DSN-25-40-PPV Condition: ITEMS ARE PRE OWNED AND APPEAR TO BE LIGHTLY USED Tested: PER PREVIOUS OWNER ITEMS ARE IN GOOD WORKING CONDITION Description: Brand:FESTO Model:DSN-25-40-PPV Dimensions:8"X1.5" Location: This item is located at our Orland Park store unless otherwise specified. If you are picking this item up locally instead of having it shipped. We still ask that you please call or message for the location of this item. Certain large items may not be located in our store. Thank you. Disclaimer* Please note that we do our best to describe all damage and details- dimensions are approximate by hand. If you the buyer are not happy with an item. Please see our return policy under the Returns tab ... morebelow. We do NOT do partial refunds but we want every buyer to be happy with their purchase. Please read below for further description on the item. Thank you! It is our highest goal and best intention to provide exemplary customer service. Open and honest two-way communication is the key. If you feel that you cannot leave 5 star feedback for any reason. Please contact us so we may resolve the situation prior to feedback being left. Please View PHOTOS for further details RC/A30 ORLAND/2 74650. We accept payments via Paypal. Mastercard and Visa as well as debit cards with the Mastercard or Visa logo. We do not accept any type of International Payment at this time. Please allow PayPal ePayments at least five(5) business days to clear. Sales Tax: All State of Illinois residents will be charged state and local sales tax during the payment process. In addition. As required by Illinois state law, sales tax is required on shipping and handling charges for all shipments terminating within the State of Illinois. Please note that if you reside outside the State of Illinois and you pick your item up locally in Illinois, ownership of your item transfers within state lines and you are required to pay sales tax. This is State Law. Internation
|
|
Title: Continental Hydraulics Directional Valve Description: Our Internal Stock# E48-41(01-22-14 RN) You are about to purchase the following item: 1- Continental Directional Valve. Used Catalog# VS5M-1A-GB5HL1-60L-J 120/110 VAC 50/60 HZ 21 W This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible ... morefor ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege on this item if found defective(freight prepaid by buyer) We will either replace item or refund money if found inoperable. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice Industrial Service
|
|
|
selling a lightly used Reliable equipment REL-425C HYDRAULIC IMPACT WRENCH W/ Hose and Bits
|
|
|
I purchased this from a local company that closed. It appears to be in good usable condition.
|
|
STILSON WLA-8139P400PS 50.000 CAPACITY 3.250 BORE WEDGE LOCK ACTUATOR USED Actuator has surface rust from sitting in storage. Please see the photos. THIS ITEM IS SURPLUS- BOX/ITEM MAY SHOW SIGNS OF DUST/ WEAR/ WRITING/ SCRATCHES/ GREASE FROM STORAGE. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value, or condition of any item. Do not assume anything about the item(s) included in this sale. We do not claim to be experts on any of the items that we sell. We do the best research we can and represent the item(s) as clearly and honestly as possible. If you have any questions or concerns regarding compatibility or specific technical specifications, we will do our best to answer them. Please ... morenote that we are a business open from 9AM to 3PM(EST) Monday-Friday. We are closed on weekends and nationally recognized holidays. To ensure a timely response to any questions you may have, please do not wait until the last minute to ask them. For questions or concerns contact 1-616-887-3572* Sales Tax: We Collect Sales tax in multiple states. Payment Options: PAYPAL or VISA/MASTERCARD. DISCOVER& AMERICAN EXPRESS(Call 1-616-887-3572) Your business is important to me. If there is any problem with your purchase or the transaction in any way please let me know. THANK YOU and HAVE A GREAT DAY! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
MOORE I/P VALVE SERVICE TRANSDUCER 77-16 IN GOOD USED WORKING CONDITION, TESTED AND INSPECTED. GUARANTEED TO PERFORM PROPERLY, SOLD EXACTLY AS PICTURED! THE UNIT WILL BE PROFESSIONALLY BOXED AND INSURED. WE ARE VERY STRICT ABOUT OUR RETURN POLICY AND WE TAKE IT VERY SERIOUSLY SO PLEASE TAKE A MOMENT AND READ OUR POLICY BEFORE PURCHASE ALSO BY CLICKING BUY IT NOW YOU AGREEING TO ALL OUR POLICY TERMS AND CONDITIONS WITHOUT ANY EXCEPTIONS! KEEP IN MIND ALL OUR PRODUCTS HAVE NON REMOVABLE TAMPER PROOF HOLOGRAMS AND SPECIAL MARKINGS. WE KEEP ALL SERIAL NUMBERS AND DIGITAL PHOTOS OF THE PRODUCT ON FILE! WARANTIES AND REFUNDS WILL BE 100% VOIDED IF THEY ARE REMOVED OR REPLACED WITH NO EXEPTIONS! 1. SHIPPING& INSURANCE: For products over 150 lbs. Buyer arrange and pay for the freight charges. ... morewe ship ONLY UPS GROUND to the lower 48 states of the United States, No P.O. BOXES WITH NO EXCEPTIONS. 2. USAGE SAFETY: We are not responsible for the misuse of the product(s) that may cause damage to the product. Or injury to any person. Buyer is responsible for checking the product(s) website. For usage and safety instruction. 3. RETURN POLICY: We accept returns within 30 days. As long as the item is in its original shipping condition, including all parts, and in its original packaging we'll be glad to issue a FULL refund(less S&H both ways) upon inspecting the product for its original condition. And its original packaging. We charge 20% restocking fee. Buyer pays all shipping ZERO TOLERANCE FOR ABUSING OUR RETURN POLICY!
|
|
NORGREN OLYMPIAN PLUS SUPER NICE AIR FILTER SETUP W/ DUAL REGULATORS. REGULATOR WILL BE DISASSEMBLED AS A WHOLE PRIOR TO SHIPPING. SEE PICTURES FOR DETAILS. IF THERE IS ANY PROBLEM WITH YOUR ORDER ONCE YOU RECEIVE IT PLEASE CONTACT AT THE NUMBER BELOW OR EMAIL ME. I DO COMBINE SHIPPING IF POSSIBLE. PLEASE READ BEFORE BUYING FOREIGN CUSTOMERS. PLEASE KNOW YOU MAY HAVE TO PAY YOUR COUNTRY'S DUTY ON PURCHASE'S. I WILL NOT LIST IT AS A GIFT SO PLEASE DON'T ASK ME TO. I CANNOT DO ANYTHING ABOUT THE TIME IT TAKES UPS,USPS,FEDEX OR FREIGHT TO DELIVER YOUR ITEM. I WANT YOUR BUYING EXPERIENCE TO BE EASY AND HASSLE FREE. YOUR WELCOME TO CONTACT MY OFFICE@ 704-983-0892 MONDAY-FRIDAY 3PM-7PM EASTERN TIME OR MY CELL@ 704-438-5055 WITH YOUR QUESTIONS AND I WILL TRY TO ANSWER THEM THE BEST I ... moreCAN. I SELL A LITTLE OF EVERYTHING SO PARDON THE LACK OF KNOWLEDGE ON SOME OF MY ITEMS.IF YOU HAVE SUGGESTIONS FOR SOME OF MY LISTED ITEMS LET ME KNOW. GOD BLESS YOU AND YOUR FAMILY VIA JESUS CHRIST.
|
|
|
Van Dorn Demag 230/460 3Phase 405TY Frame 75HP. Reliance Electric 230/460 3 Phase 405TY Frame 75HP. Vickers Variable Piston Pumps Load Sense w Compensator over ride w piggy back Vane Pumps. PVH131QP-4535V45R Model# 339498. Double Vane Pumps: 4535V45AM25-11DA22R/ 2306-6205-U-0106.
|
|
Part Number: VAL6614-4304-103. Box Dimensions: L 16.00in. W 12.00in. H 10.00in. Estimated Weight: 80.00. Item Number: 44677. Location: R16A2. Manufacturer: Parker Item Details: This is a Parker Hydraulics Stack Assembly VAL6614-4304-103. The unit is military surplus. It is the stack assembly for the armored earth mover. We don't know if the unit is used or not. It was loose in the bottom of a 4 x 4 box with other stuff on top of it. We also don't know if it works. We have no way to test the unit. It was made in 07-10 and is mounted on a piece of chip board. IT IS SOLD AS IS. If you would like this item insured please contact us before you submit payment. Otherwise it will ship without insurance. The shipping department closes at noon each day. Therefore. Any payments received after ... more10:00 a.m. will ship the next business day. Please use the eBay shipping calculator to determine the shipping cost to your zip code. This will also calculate shipping to other countries. There is a small handling cost added to the actual shipping cost to cover some of our expenses(see About Me page for details) If you are uncertain or have questions regarding the cost please email us before making your purchase. If combining multiple orders. Please contact us to verify the shipping cost as the calculator does not take into account the bigger box sizes, etc. Sometimes this will increase or decrease the cost depending on the items purchased. We don't want to overcharge you nor do we want to lose money on the shipping cost. Used Items: All used working items have a 14 Day(FOURTEEN) DOA warranty from the time of receipt. AS IS Items: AS IS items have NO warranty and are sold for PARTS or SALVAGE ONLY! DOA Items: We will exchange any item found to be defective. Or, at the customers request, parts may be sent to replace a part found to be defective and causing the item to malfunction. PLEASE NOTE: To be covered by Paypal we have to ship to the address listed in the Paypal payment. So. Before submitting your payment please make su
|
|
NICE 1.5 GALLON CAPACITY HYDRAULIC/ FLUID TANK RESERVOIR Click Images to Enlarge NICE 1.5 GALLON CAPACITY HYDRAULIC/ FLUID TANK RESERVOIR COMES AS SEEN IN PHOTOS CAPACITY 1.5" INSIDE MEASURES 9.5"x7"x7" OVERALL SIZE 12"x10"x12" WEIGHT 13 LBS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: ... moreUsps Priority Intl I will ship to: United States. Worldwide[Weight] 14 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, C
|
|
Parker Domnick Hunter High Flow Bio-X Autoclave Vent Filter MER 4 SR& Housing USED AUTOCLAVE VENT FILTER. IN FAIR CONDITION. COMES WITH HOUSING AND FILTER ELEMENT. UNIT HAS 1" NPT PORTS. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8624. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# MER 4 SR OVERALL DIMENSIONS: WIDTH: 5" LENGTH: 5" HEIGHT: 7" SHIPPING WEIGHT: 12 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF ... moreTHE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUST
|
|
|
Good Condition and Local Pickup Only. Thanks for looking. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-143d7b5a728-0xfb-
|
|
|
Used Vickers large hydraulic pump machine. works very good and at high capacity. On wheels. Working gauges and hydraulic cylinder. Must sell asap due to heart transplant expenses. pick up only
|
|
|
Used 3/4" Hydraulic Impact Wrench. Shows little sign of use. Added power and torque for heavy-duty jobs, Twin hammer design, Can be used on either Open-Center or Closed-Center system, Adjustable torque control, 3/4 IN square drive with auxiliary handle, Needle bearing. Rugged gear motor design for long life, Accessory: 54923. HTMA Male Coupler, 54925. HTMA Female Coupler, Drive Size: 3/4 IN Square, Flow Range: 4- 12 GPM(15- 45 LPM) Height: 11.690 IN(297.000 MM) Length: 9.690 IN(246.000 MM) Operating Pressure: 1000- 2000 PSI(69- 140 BAR) Pressure Port: 3/4-16 SAE O-Ring, Return Port: 3/4-16 SAE O-Ring, Rpm: Range From 2700 RPM At 6 GPM(23 LPM) No Load) Torque Rating: 1060 FT-LB(1437 N-M) At 6 GPM(23 LPM) Weight: 12.300 LB(5.600 KG) Width: 3.750 IN(95.000 MM)
|
|
|
Up for Bid is: 1] Hytorc XLT-8 1 1/2" drive also included is[1] 2" Wright Socket 1 1/2" dive. Items are used and do show wear. Items work in good working order. Shipping to the lower 48 States only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-143e50c14f6-0xd7-
|
|
|
What is offered for sale is one(1) high pressure 1/4" valve that is made from 316 stainless steel and is rated at 2.500 psi at 150 F. Is this the valve you need? Then buy it with confidence! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-143e6d1d972-0xe3-
|
|
2 bar Hydraulic Pressure Gauges Liquid Filled with many accessories Excellent condition with clear screens. Comes with all the fittings pictured in a great fitting case. There are 6 Alden Combo wrenches sizes: 15.17 5/8. 11/16 1/2. 9/16 13.14 3/8. 7/16 10. 12 Also included are 2 hoses and a variety of fixtures(all pictured) Any questions. Don't hesitate to ask us. Summary of My Selling Policies Payment Hello and Congratulations Thank you for your purchase. Our preferred way of payment is Paypal or call us directly at(415) 777-3877 with your Credit Card information. Once you receive your item and are satisfied please leave me feedback. And I will right away leave feedback for you. Fees California Sales Tax will be charged to all items shipped to an address within California at San Francisco ... morerate of 8.75% Shipping and handling will not be taxed. Shipping International Mailing by USPS GLOBAL EXPRESS or USPS PRIORITY. Foreign bidders and bidders from AK. HI and PR Please email us for an estimate. International Buyers are responsible for all Duties and Custom Fee associated from receiving or returning purchased items. Furthermore pacloan is notresponsible for any foreign duties or taxes of any kind. Unless Stated Different in the auction all items that are being Shipped Within the 48 states UPS GROUND NO P.O.BOXES NO Exceptions! Import duties. Taxes, and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up; do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" U.S. and International government regulations prohibit such behavior. Delivery Will usually ship within 1 business days of receiving cleared payment. We shipped 5 days a week and s
|
|
|
Used MOOG hydraulic valve MOOG GMBH D-7030 Boblingen MOD d651-401 S/N D441. Posted with
|
|
|
Parker Hannifin Hydraulic Control Valve. Marked with 00537 EF 3/8" NPT Ports 2 Direction
|
|
MOORE PRODUCTS 50MX-2 NULLMATIC CONTROLLER B/M R54527 IN GOOD USED WORKING CONDITION.TESTED AND INSPECTED, GUARANTEED TO PERFORM PROPERLY, SOLD EXACTLY AS PICTURED! THE UNIT WILL BE PROFESSIONALLY BOXED AND INSURED. WE ARE VERY STRICT ABOUT OUR RETURN POLICY AND WE TAKE IT VERY SERIOUSLY SO PLEASE TAKE A MOMENT AND READ OUR POLICY BEFORE PURCHASE ALSO BY CLICKING BUY IT NOW YOU AGREEING TO ALL OUR POLICY TERMS AND CONDITIONS WITHOUT ANY EXCEPTIONS! KEEP IN MIND ALL OUR PRODUCTS HAVE NON REMOVABLE TAMPER PROOF HOLOGRAMS AND SPECIAL MARKINGS. WE KEEP ALL SERIAL NUMBERS AND DIGITAL PHOTOS OF THE PRODUCT ON FILE! WARANTIES AND REFUNDS WILL BE 100% VOIDED IF THEY ARE REMOVED OR REPLACED WITH NO EXEPTIONS! 1. SHIPPING& INSURANCE: For products over 150 lbs. Buyer arrange and pay for the freight ... morecharges. we ship ONLY UPS GROUND to the lower 48 states of the United States, No P.O. BOXES WITH NO EXCEPTIONS. 2. USAGE SAFETY: We are not responsible for the misuse of the product(s) that may cause damage to the product. Or injury to any person. Buyer is responsible for checking the product(s) website. For usage and safety instruction. 3. RETURN POLICY: We accept returns within 30 days. As long as the item is in its original shipping condition, including all parts, and in its original packaging we'll be glad to issue a FULL refund(less S&H both ways) upon inspecting the product for its original condition. And its original packaging. We charge 20% restocking fee. Buyer pays all shipping ZERO TOLERANCE FOR ABUSING OUR RETURN POLICY!
|
|
Title: Rexroth/ Okuma Hydraulic Valve. 481624/5 Z2FS 6-2-40/2QV, Used Description: Our Internal Stock# B25-3(02-04-14 RN) You are about to purchase the following item: 1- Rexroth/ Okuma Hydraulic Valve. 481624/5 Z2FS 6-2-40/2QV, Used Catalog# 481624/5 Z2FS 6-2-40/2QV Assembled in USA This item was taken off of a Tool Changer on an Okuma MC-4VA Vertical Machining Center. This item was taken directly from working service in good working condition. being sold in good working condition. Full 30 day return privilege on this item if found defective(freight prepaid by buyer) We will either replace item or refund money if found inoperable. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email ... moreus and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW,
|
|
|
Used Vickers pressure reducing valve DGMXZ-3-PP-CW-S-40
|
|
|
Used Vickers flow control valve DGMFN-3-Y-A2W-B2W-41
|
|
|
Used Vickers solenoid valve DG4V-35-33C-M-FP45WL-B5-60
|
|
|
Used Bosch Rexroth Flow Control Valve 0-811-024-104
|
|
|
Used Bosch Rexroth directional valve ZDR6DPZ-42/75YM
|
|
|
Used Bosch Rexroth directional valve 4WE6061/EG24N9DK24L/V
|
|
|
Used Bosch Rexroth directional valve 9-810-231-438,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-143fd7ba028-0xf9-
|
|
|
Used Bosch Rexroth solenoid valve 0-820-005-101
|
|
|
Used Bosch Rexroth Control Valve 0-811-160-174
|
|
|
Used Bosch Rexroth Pressure Relief Valve 0-811-106-033
|
|
|
Used Bosch Rexroth Pressure switch 0-811-160-065
|
|
|
Used Bosch Rexroth Valve 0-0810-092-109
|
|
|
Used Bosch Rexroth Valve 0-0810-092-105
|
|
|
Used Bosch Rexroth Valve 0-0810-001-731
|
|
|