|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Boise, United States
Twist-on pipe strainer, installon inlet side of pump.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
NOTE: After a order placed our system will send automatically the request to the warehouses and will be not possible to cancel. Switch Type Pressure Switch. This pressure switch is designed for high-pressure on-board air systems.
Buy It Now
Free Shipping
Condition: New Location: Raleigh, United States
GOGO Pneumatic air filter Regulator Manual drain.
Buy It Now
Free Shipping
Condition: New Location: Fort Lauderdale, United States
1/2" x 60 " Hydraulic Hose Assembly w/FEMALE JIC ends. Fitting – 1/2” Female Jic Swivel (3/4-16 threads). Hose –1/2” SAE100R2AT. Hose desc RANGE: minus 40 deg to 250 deg F. Finished Length - 60".
Buy It Now
Free Shipping
Condition: New Location: Reno, United States
0325172 Toilets / Urinals G2 EBV130A.
0 bids $4.95 Shipping
Condition: New – Open box Location: Berthoud, United States
Seal is new never installed.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Lubricates stems of faucets, valves, ballcocks etc. Petroleum based formula. Makes hard-turning faucets work smoothly. Container Size (oz) 1. Minimum Temperature (F) 0 F. tube for easy application. Each item is carefully sourced and inspected to ensure the highest standards.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Price is for 10 pcs.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
CONDOR PRESSURE SWITCH. Pressure Switches. Check Valves. California Residents Warning. PART# CW218700AV. Compressor Motors. 120 / 240 VOLTS. California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
Keep Reading Steady During Engine Operation ,with easy to Vent Plug for accurate readings. - Custom Dial Layout. -4°F to 140°F (-20°C to 60°C). Fill: Li q ui d Fi l l ed (G l y c eri n). Case Design.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
2-1/2" ID x 2-7/8" OD x 3/8 Height x 3/16 CS Thickness. Four lobed or quad ring espander design efficiently vectors pressure through the seal body. Used on 2-1/2" Rod. Feature excellent dry rod performance.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Pneumatic connection, 1/4" OD (all Port). Material release ring POM Material of tubing seal. NBR Material of tube retaining claw. color of release ring blue. Length 1.4x0.5". Materials note Conforms to RoHS.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
Gas Test Gauge Assembly, 3/4” FNPT, 3-2-3% accuracy. Accuracy : +/-3-2-3% Working temperature : -4 to 140 deg F/-20 to 60 deg C. EASY TO Read 2" Pressure Gauge, Durable Glass Lens Non Fading.
Buy It Now
$5.99 Shipping
Condition: New Location: Minooka, United States
Shaft Seal 22JH64. JB INDUSTRIES PR-3. Shaft Seal. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
FOUR PORT. UNLOADER VALVE. Rated at 20 AMP, 120 volt. UR and CSA approved. The bottom side has four 1/4" FPT ports. One for tank pressure. One for pressure relief valve. Other two for gauge and pressure outlet.
Buy It Now
Free Shipping
Condition: New Location: Cleveland, United States
SOLDER PASTE FLUX Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems.
Buy It Now
Free Shipping
Condition: New Location: Lewiston, United States
2-1/4“ Internal Snap Ring - Tru-Arc Type. Alternate Part Numbers Material: Carbon Steel.
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Jenny 141-1047. pilot valves are used in compressed air systems to actuate another device using a pneumatic (air) signal. pilot valves always work in conjunction with another device. Inlet Connection Type: NPT.
0 bids Free Shipping
Condition: New Location: Florence, United States
2-American Valve Drain Caps.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
An d da m pe n P ul s a ti on &V i brati on. Crimped Style Casing, Stainless Steel. LIQUID FI LL E D PRE SS URE G A UG E. 2 ½" Stainless Steel Case / Brass Connection - Lower Mount. 1/4" NPT Lower Mount.
Buy It Now
Free Shipping
Condition: New Location: Sarasota, United States
We are a husband and wife team. Two things set us apart.
Buy It Now
Free Shipping
Condition: New Location: Kennesaw, United States
Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. 1/4" SAFETY RELIEF VALVE (POP OFF VALVE). Including, but not limited to, using alternative products.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Price is for 10 foot.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Pneumatic connection, 1/4" OD (all Port). Material release ring POM Material of tubing seal. NBR Material of tube retaining claw. color of release ring blue. Materials note Conforms to RoHS. Length 0.9x0.9".
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
An d da m pe n P ul s a ti on &V i brati on. Crimped Style Casing, Stainless Steel. LIQUID FI LL E D PRE SS URE G A UG E. 2" Stainless Steel Case / Brass Connection - Lower Mount. Copper Alloy. Stainless Steel Case.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
Air compressor 3/8" female NPT pipe thread x 3/8" male NPT thread in tank check valve. The 3/8" male NPT side is usually used to screw into the air tank and the 3/8" female NPT side is the inlet for the incoming air coming from the compressor pump. This valve is also equipped with a 1/8" female NPT threaded port on the side for an unloader line, if your compressor does not need the unloader port it can simply be plugged with a 1/8" NPT plug.
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
Type: Straight Male Connector NPT. 10 x Straight Male Connector. Tube:5/32" ( 4mm).
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
3/8" x 3/8" female npt inline air compressor check valve. This valve is brass constructed, and is 2.75" long. The inline check valve design is made for applications where a normal in tank check valve will not work. This valve can be installed anywhere in the discharge line of the compressor before the air goes into the tank. This valve has an 1/8 port in the side for an un-loader line. If your compressor does not have one, this can easily be plugged. The inlet side of this valve is stamped with the letters IN, it is very important that you get it in the right direction. If not installed correctly it can do damage to your compressor.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
FKM Heat Resistant O-rings. A general purpose FKM. Outstanding resistance to blended aromatic fuels and straight aromatics as well as halogenated hydrocarbons. Good resistance to strong acids and steam.
Buy It Now
$9.00 Shipping
Condition: New – Open box Location: Syracuse, United States
Buy It Now
Free Shipping
Condition: New Location: Gloucester City, United States
Not compatible with other style cans or spouts. See photos for more details. Replace your old, worn, leaking o-ring rather than your entire spout or can.
0 bids Free Shipping
Condition: New Location: Delta, United States
Category:Other Hydraulic Parts and Accessories. Diaphragm Valves. Hydraulic Cylinders. Hydraulic Filters. Hydraulic Hoses. Hydraulic Motors. Hydraulic Systems. Hydraulic Valves.
Buy It Now
Free Shipping
Condition: New Location: Westmont, United States
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
Compressor Motors. Compressor Oil. Compressor Repair Parts. Vacuum Pump Parts. Automatic Tank Drains. Bottom side has a pressure release unloader valve for 1/4" tube. Pressure Switches. UNLOADER VALVE ON/OFF KNOB, BOTTOM AND SIDE WIRE FEED.
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
1/2" X 1/2" female npt inline air compressor check valve. This valve is brass constructed, and is 3 1/16" long. The inline check valve design is made for applications where a normal in tank check valve will not work. This valve can be installed anywhere in the discharge line of the compressor before the air goes into the tank. This valve has a 1/8"port in the side for a un-loader line, If your compressor does not have one then it can be plugged. The inlet side of this valve is stamped with the letters IN, it is very important that you get it in the right direction. If not installed correctly it can do damage to your compressor.
Buy It Now
$4.50 Shipping
Condition: New – Open box Location: Auburn, United States
Tooling & Product support Group. Stainless Steel precision machined fittings and vacuum generator fitting.
0 bids Free Shipping
Condition: New – Open box Location: Milwaukee, United States
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Install filters in front of pressure cleaners, garden hoses, and drip irrigation lines to remove impurities that can clog pipes and sprinklers and increase the life of machines and pipes. Outlet Connection Type FNPT.
0 bids Free Shipping
Condition: New Location: Hebron, United States
Hydraulic Gauge Test Kit Hydraulic Nitrogen Accumulator Charging System Gauge Pressure Test Kit with 3 Gauges, 7 Couplings and 1 Gas Hose. Hydraulic Parts: Pump Assembly & Spare parts, Final Drive and Gearbox, Swing Motor, gearbox etc.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
"This is only the bracket, the gauge shown is only for demonstration purposes".
Buy It Now
Free Shipping
Condition: New Location: Lincoln, United States
1/2" x 1/2" air compressor in-tank check valve. This check valve has 1/2" NPT Male threads that go into the tank and 1/2" NPT Female threads to the compressor. If your compressor needs an unloader line, this check valve features a 1/8" NPT female hole on the side where an unloader line hooks up. If your compressor does not use an unloader you simply plug the 1/8" hole. This is a solid brass check valve that is made here in the U.S.A.
0 bids Free Shipping
Condition: New Location: , United States
Cylinder connector fittings (Quick Valve Female Connector) have a threaded male end perfectly matched to our cylinder/cup housings. The other end has the female Quick Disconnect Fitting that allows for no loss of vacuum when disconnected from the male Fitting.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Manufacturer TAILONZ PNEUMATIC. Size 1/4"OD 32.8FT. 【Size】1/4"OD（6.35mm）,1/6"ID（4.25mm）. Size 1/4"OD 1/4"OD 1/4"OD×1/4"NPT 1/4"OD×1/4"NPT 1/4"OD×1/4"NPT 1/4"OD 6mm OD. Nylon Tube is a Kind of Synthetic Fiber, with Good Physical and Chemical Properties: Wear Resistance, Can Be Used in the Condition of Sand, Iron Filings.
Buy It Now
Free Shipping
Condition: New Location: Warren, United States
ENERPAC -P80K4, New. We are an authorized Enerpac Service Center.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
One side has a pressure release unloader valve for 1/4" compression tube. Rated at 20 AMP, 120 volt. UR and CSA approved. Pressure Switches. One for pressure relief valve. One for tank pressure. Other two for gauge and pressure outlet.
Buy It Now
Free Shipping
Condition: New Location: Northbrook, United States
Condition New. Bostitch Spenax Vertex Compatible. Used for the Hog Ring Tool Closure and Pneumatic Tool for Mattresses. Since 1968,Encore-Hartco has produced billions and billions of quality fasteners for many industries and applications.
Buy It Now
Free Shipping
Condition: New – Open box Location: Ravenna, United States
NOS gauge 5" bolt centers. 1/2" -20 standard thread pitch bolts.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
An d da m pe n P ul s a ti on &V i brati on. Crimped Style Casing, Stainless Steel. LIQUID FI LL E D PRE SS URE G A UG E. 2 ½" Stainless Steel Case / Brass Connection - Center Back Mount. 1/4" NPT Center Back Mount.
Buy It Now
Free Shipping
Condition: New Location: Accokeek, United States
Set Of 2 - Sloan A-37-A Urinal Flushometer 1.5 gpf / 5.7 Lpf Repair Kit. Condition is New. Shipped with USPS First Class Package.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Price is for 25 pieces.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
PART# CW211400AV. CAMPBELL HAUSFELD. Automatic Tank Drains. PRESSURE SWITCH. Pressure Switches. Check Valves. California Residents Warning. California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Price is for 10 pieces.
Buy It Now
Free Shipping
Condition: New Location: Orlando, United States
New in the box ½" NPT Pneumatic Air Motor Muffler Silencer.
Buy It Now
$4.45 Shipping
Condition: New Location: Henrico, United States
Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants, hydraulic oils, gasoline, fuels and L.P. gases. Buna O-rings. Size#008 = 3/16 ID x 5/16 OD x 1/16 CS.
Buy It Now
Free Shipping
Condition: New Location: Long Beach, United States
Product size: 46mmx26mmx26mm/1.73" 1" 1"(L W H).
Buy It Now
Free Shipping
Condition: New Location: Hays, United States
60019 Norwesco Polyethylene 4" Center Snap In Air Vent Assembly For 16" LidFits Norwesco lid models #60038 and 60011Made of high density polyethylene
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
An d da m pe n P ul s a ti on &V i brati on. Crimped Style Casing, Stainless Steel. LIQUID FI LL E D PRE SS URE G A UG E. 2 ½" Stainless Steel Case / Brass Connection - Center Back Mount. Copper Alloy.
0 bids Free Shipping
Condition: New Location: Fairfax, United States
It includes all necessary components to enhance the overall performance of your plumbing system. -Dual filtered fixed diaphragm drop in kit.
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Port Type.5625-18 Unf-2b Sae O-RING PORT, END PORTED. Shaft: Dia 15.88 [.625] Straight With Straight 4.72 [.186] Sq Key With. 250-28 Threaded Hole. Mounting: 5 Bolt; Dia 31.47 [1.239] X 5.1 [.20] Pilot. 250-28 Unf Mounting Holes On Dia 45 [1.77] Bolt Circle.
Buy It Now
Free Shipping
Condition: New Location: Clinton Township, United States
Fits 1080085 / 1300488.
|
|
|
You are buying one item. This unit is used. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough infor mation on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: S-157 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff and we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK ... morePLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On May-31-11 at 18:04:24 PDT. Seller added the following information:
|
|
Check out the photos for best condition and descriptions. WHAT YOU SEE IS WHAT YOU GET. UNIQUE ITEM. PARTS ARE CUT-A-WAYS TO SHOW INTERNAL WORKINGS. SALESMAN SAMPLE. POSSIBLY THE ONLY ONE. FOAM INSIDE OF BOX IS IN POOR CONDITION AND IS DETERIORATING. BUYING AS IS. I WOULD BE HAPPY TO SEND MORE PHOTOS TO EMAIL. Check out my! PLEASE READ ALL FINE PRINT AT THE BOTTOM BEFORE PLACING YOUR BID. You are buying as is. For any specifics please ask. I don't know much about this as it was part of an estate. Due to the age of most items I receive to list. They may have some wear. I do have other auctions listed. Please check them out and save on shipping. You are buying this item AS IS with no returns so please be sure before bidding. No international bidders. E-mail me with any questions BEFORE you ... moreplace your bid*All items go to the highest bidder-I DO NOT end auctions early as it is against E-bay rules*Feedback is left once the buyer has left feedback for me as a way of making sure that your package has arrived safely-If you have a problem please e-mail me ASAP so we can try to resolve it.
|
|
|
Thomas Pump 905EA18- 348B( 115V 60HZ 3.5A Voltage) USED BUT TESTED IN GOOD WORKING CONDITION- SEE HD VIDEO BELOW Pictures are of actual item. International buyers please email for shipping quote. Thank You!
|
|
|
For sale one Matweld Brand Hydraulic 4" Grinder. Auction comes as pictured nothing more. Grinder is in good looking condition and in correct working condition. Shipping is $35.00 only for 48 Mainland states. Auction comes with a 14 day warranty minus any shipping fees to send back. Paypal payment only. Thank you.
|
|
Bimba Model: HSK=% Hall Effect Base Switch Bimba: Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. Please contact ... moreSystech prior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
UP FOR SALE IS THIS USED CLIPPER AIR VALVE FOOT PEDAL SWITCH CAT. NO. 4C-30F2-S. THIS IS A USED CLIPPER AIR VALVE FOOT PEDAL SWITCH. CAT. NO. 4C-30F2-S. 30 CFM AT 100 PSI. THIS PART WAS IN WORKING ORDER WHEN LAST USED. IT HAS BEEN IN STORAGE. IT IS DIRTY AND NEEDS TO BE CLEANED UP. COMES WITH WHAT IS SHOWN IN THE PICTURES. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ALASKA. HAWAII. PUERTO RICO, CANADA OR ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. D54
|
|
Used: An item that has been used previously. The item may have some signs of cosmetic wear. But is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. WE DO DIS MENTAL MOST USED MACHINE FOR RESELL Item will be ship via economy shipping. Delivery take about 7 to 21 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL +++Please read the Terms& Condition before purchase+++ ACCESSORIES Any accessories. Manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED. INTERNATIONAL BUYER Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. ... morePlease check with your country's customs office to determine what these additional costs will be prior to bidding or buying WARRANTY Our warranty is valid for 14 days after initial receipt of item. PAYMENT TERMS PAYPAL. WIRE TRANSFER TT or Contact Us RETURN POLICY-For item condition not as described. Defective. Please report to us for replacement or refund within 14 days of receipt. Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER. All items will ship with our warranty label. If any stickers have been removed or tampered. Your refund will be canceled.
|
|
|
92308 Parts Only. Lubriquip 463-001-524 LOT-5 Check Valves, 1/5"18 NPT SS, Item is intended as parts source only- actual working function unknown. Austin Surplus SKU: 92308 Location: GRG-R05-P06-S04-D-0004048
|
|
|
92307 Parts Only. Lubriquip Lot- Lubriquip Valve Parts, 2(463-001-524) 2(563469) sub plate, 2 main valves, varied connecters and screws. Item is intended as parts source only- actual working function unknown. Austin Surplus SKU: 92307 Location: GRG-R05-P06-S04-D-0004778
|
|
|
92300 Used. Manatrol 81-C-422 Drain Plate for Valve Manifold, Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 92300 Location: GRG-R05-P06-S04-D-0002084 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ecf785a96-0x106-
|
|
|
92295 Used. Lubriquip Valve Manifold, 2(MSP-25T) MSP-15T, Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 92295 Location: GRG-R06-P05-S03-0003185.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ecf785a90-0x106-
|
|
|
92294 Used. Lubriquip Valve Manifold, MSP-15T, MSP_25T, MSP-35S, Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 92294 Location: GRG_R06-P05-S03-0004463
|
|
|
92284 Used. Lubriquip Valve MSP-5T, MSP-30T, MSP-10T, MSP-5T, Manifold, missing a middle slot. Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 92284 Location: GRG-R05-P06-S04-D-0010631
|
|
|
UCC PARKER SYSTEM 20 OIL CALIBRATED MONITOR. JUST THE CALIBRATION MONITOR. SENSORS AND FLOW METERS AVAILABE SEPERATELY Powered by
|
|
Questions? Call us: 1-877-328-9236. Robohand RPW-500M-2 2.5" Stroke 667N Synchronized Parallel Jaw Gripper RPW5002. Manufacturer: Robohand Model: RPW-500M-2 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Robohand Condition: Used. Comes in non-original packaging. This gripper is in Good cosmetic condition with only minor residues and light scuffs/scratches from previous use. Notes: This gripper is in Good working condition. We removed it from a decommissioned robot. When air is applied. The ends extend and retract as expected. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Robohand RPW-500M-2 Gripper, Specifications: Manufacturer: Robohand, Part Number: RPW-500M-2, ... moreWide body parallel gripper, Excellent jaw support through the full body, High grip force: 667N(150lbsf) Synchronized motion, Stroke: 2.5" 63.5mm) 6mm adjustable one-touch quick-release air fittings, SKU: N21D021 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be ava
|
|
You are buying three items. Norgren TFR 3/8REV#0 These units are used. Payment is expected within 72 hours unless other arrangements have been made. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: C-10 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly ... morestaff and we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jul-07-10 at 17:35:33 PDT. Seller added the following information: 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ef18fe9ae-0x108-
|
|
|
REMANUFACTURED. TAG MISSING. SEE PICS. APPROX. SHIP WEIGHT: 35 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING PRICE. THESE FEES WILL VARY ACCORDING TO PALLET SIZE. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. CL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CONSLER FILTER BOWL GREAT CONDITION THANKS
|
|
|
Auction Wizard 2000 Listing Template- AW2KLOT#2530 This auction is for a US Military Hand Carry Hydraulic Axle Jack. Model 53D22020. This item is used and has significant signs of wear from regular usage. The hydraulic appears to be working. However, it is not functioning very smooth. Since it could use some maintenance, it is being sold for parts and/or repair. Other information: NSN: 1730-00-540-2343 MFR: Department of Air Force S/N: 589
|
|
|
USED.LHA TI-15P CLOGGING INDICATOR GAUGE RED/GREEN FACE LIKE NEW We are a surplus warehouse and have many great parts for great prices. We are honest and as accurate as possible. If we have more than one of this particular item. You may not receive the exact one shown in the pictures, however you will receive the same model. Some parts may be dusty or have slight cosmetic imperfections. Please reference photos and email any questions as returns are not accepted. International buyers subject to international shipping fees. JT050113M4
|
|
|
Up for sale is a lot of 3 Hydromatik pumps. All three pumps are the same model. Two mounting collars and two couplings are included. I was told the first one was rebuilt and never used( light grey one in first pic) I was told the second one was working when removed from service(second pic. Dark grey pump with red plastic caps) I was told the third pump is not working( 3rd pic) The first two pumps turn freely. The third pump does not turn. All three pumps were stored indoors. I will put the pumps on a pallet. I have a forklift and a loading dock to assist in loading. I can get the pumps weighed. This is an as is listing. The buyer must arrange the shipping. Speed: 1800 rpm Flow: 35 gpm Pressure: 5000 psi The electric motor visible in the pictures is available for sale.
|
|
You are buying two items. Mosier TFR-3/8 These units are used. Payment is expected within 72 hours unless other arrangements have been made. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: C-10 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff ... moreand we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jul-07-10 at 17:35:33 PDT. Seller added the following information:
|
|
|
A GROUP OF VIN TAGE BRASS BRASS PRESSURE GUAGES. IN A N AS FOUND CONDITION WITH NO REPAIRS OR REFURBISHMENTS. AS DETAILED THEY ARE IN GOOD CONDITION WITH THE EXCEPTION OF THE EW GUAGE WHICH HAS NO GLASS AND SOME LOSS TO ITS CASING, PLEASE REFER TO THE DETAILED PHOTOGRAPHS FOR MORE INFORMATION. DIMENSIONS ARE; BOURDON. 6" DIAMETER ANDREWS WEATHERFOIL. 4" DIAMETER UN-NAMED. 3" DIAMETER EW. 2.25" DIAMETER THIS ITEM IS BEING SOLD FROM THE ESTATE OF AN ASSOCIATE. PLEASE CONTACT ME WITH ANY QUERIES OVERSEAS BUYERS PLEASE C ONTACT US TO CONFIRM PACKING AND SHIPPING COSTS AS THE SE COULD VARY
|
|
Inventory Number: 05131730021 Manufacturer: Description: AMTHOR DEAD WEIGHT PRESSURE GAUGE TESTER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS SHOWN, MAY NEED CALIBRATION BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be func
|
|
ENERPAC P-142 P-SERIES HYDRAULIC LIGHTWEIGHT HAND PUMP This came out of a car manufacturer that closed. This auction is for a ENERPAC P-142 P-SERIES HYDRAULIC LIGHTWEIGHT HAND PUMP. This was mounted on a small press. It was working when we removed it. The oil has been drained. If you have any other questions feel free to ask. 1st Stage Oil Displacement/Stroke: 221 Cubic Inches 1st Stage Pressure Rating: 200 psi 2nd Stage Oil Displacement/Stroke: 055 Cubic Inches 2nd Stage Pressure Rating: 10.000 psi Max Handle Effort: 78 lbs Usable Oil Capacity: 20 Cubic Inches. No. of Speeds = 2 Useable Oil Cap. = 20.0 cu in[Max] Operating Pressure@ Volume/1Stroke = 10000 psi@ 0.055 cu in NPT PORT 1/4" Oil Displacement Per Stroke(2nd Stage) = 0.055 cu in Maximum Handle Effort = 72 lb Length = 13 1/4 ... morein Width = 3 3/4 in Height = 5.630 in Wt. = 4 1/2 lb, Enerpac high pressure. Hydraulic lightweight hand pumps feature a compact design and are available in single and two speed pump types, Durable glass-filled nylon reservoir and nylon encapsulated aluminium pump base for maximum corrosion resistance, Two-speed operation reduces handle strokes by as much as 78% over single speed pumps, Lower handle effort to minimize operator fatigue, Integral 4-way valve on P-842 for operation of double-acting cylinders, Handle lock and lightweight construction for easy carrying, Large oil capacities to power a wide range of cylinders or tools, Non-conductive fiberglass handle for operator safety, Internal pressure relief valve for overload protection. For use with cylinder Pump Speed Usable Oil Capacity Model Number Pressure Rating* Oil Displacement per Stroke Max. Handle Effort Piston Stroke Weight bar cm3 S/A D/A Single Two cm3 1st stage 2nd stage 1st stage 2nd stage kg mm kg• 327, P-141– 700, 0.90, 32.7, 12.7, 2.0, 901, P-391– 700, 2.47, 38.6, 25.4, 4.1, 327, P-142* 13, 700, 3.62, 0.90, 35.4, 12.7, 2.0, 901, P-202 13, 700, 3.62, 0.90, 28.6, 12.7, 3.4, 901, P-392* 13, 7
|
|
|
I have a up for bid an industrial hydraulic power pack. This unit is powered by an 18 h.p. Vangard v-twin Briggs and Stratton engine model 350447. This unit is capable of supplying 5 gpm and 10 gpm of hydraulic flow. It runs very smooth. I recently changed oil and filter. New air filter, fuel filter and cleaned the carb. Hoses will be included in sale. Local pick up only or buyer arranges shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f52492253-0x105-
|
|
N.B. All my items are old and have been used so please do not expect them to be in perfect condition. Description- I have on offer I have a brass pressure gauge which came from a recent house clearance- I am unsure too it's age. Condition- This item is in used condition with some wear and tear in keeping. Please study pic for condition. Postage- In most cases postage will be via Royal Mail first class on items up to 46.00 GBP within the UK items in excess of 46.00 GBP will be by recorded delivery within the UK- Over sea's buyers. I will only post/ship via airmail and in most cases by a trackable or a recorded delivery system- Sale conditions- a) Over sea's buyers I accept paypal only. No other form of payment is acceptable. b) UK buyers I accept paypal- postal order. c) I donot ... moreaccept bank transfers or cheques drawn on a none UK bank. d) I require the winning bidder of the item to pay within 7 days or the item will be relisted. e) If my item description is wrong I will of course offer a full refund on the item as long as it is returned in the same condition it was posted. This must be done within 7 days. f) I will obtain proof of postage on every purchase. If the unit cost exceeds 30.00 GBP it will be posted/shipped via a recordable/trackable service. g) Whilst I will pack carefully if the item arrives damaged this becomes the responsibility of the postal operator not myself as the seller. So any claim will be through them and not me. h) If a claim needs to be made I will of course help in the paperwork preperation as so needed. i) I will leave feedback on the day that the item is posted. j) Please contact me before leaving negative feedback. I will do my up most to offer a fair resolution to the problem. But please do not expect me to go back on my terms and conditions for any reason! it is your responsibility to read them before bidding. k) There will be a reduced p&p for all multiple purchases if possible. Overseas buyers beware that if items combine weigh
|
|
|
C9460 Wilkerson Model R10-02-000 Pneumatic Regulator with Pressure Gauge- Removed from a machine that was replaced with an updated machine- Tests OK. Please review all the pictures. They are a part of the description. We will combine shipping whenever possible. Not responsible for customs charges.
|
|
|
This is a good condition hydraulic foot pump. If your looking at it you probably know more about it than I do. This comes with both hoses in the picture and is guaranteed to work of your money back. Posted with
|
|
Thread Thred- Taper 7000 automatic threading machine Condition: This item is in great shape with little to no wear. The item has been used briefly durring the summer in a MFG setting. Then put into a storage unit. There minimul wear, with little scratches, dings, dents etc. From the company's website: Increasing productivity while saving money is the goal of every business. With the Thred Taper Automatic PTFE Tape Machine you can do just that. The Thred Taper's measured PTFE tape dispenser automatically applies PTFE tape to most fittings in about 3 seconds. Saving you as much as 500% on your PTFE taping costs. For OEMs. It virtually eliminates product failure due to leaks. For suppliers, you can offer the value-added feature of fittings pre-wrapped with PTFE tape for hassle-free assembly. ... moreIn addition, this compact and easy-to-use machine allows for quality and consistency that is unmatched by hand-wrapping. Shipping: I tems will be shipped Fedex Ground. We do not ship to P.O. Box. due to insurance and tracking Buyer responsible for international shippments. Insurance. And email tracking number included. please include your email address. Terms I AM A 3RD PARTY VENDOR SELLING THIS ITEM FOR A COMPANY OR INDIVIDUAL. I HAVE CHECKED THIS ITEM OUT: CLEANED IT. TESTED IT, BENCH TESTED IF APPLICALABLE, AND AM LISTING IT. ALL ITEM SOLD ARE GOOD TO GREAT WORKING CONDITION. OR I WOULD NOT SELL THEM. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDIT I ON UNLESS OTHERWISE SPECIFI ED. ITEM IS BEING SOLD AS IS W ITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. PLEASE LOOK AT THE PHOTO'S. IF YOU NEED MORE. PLEASE LET ME KNOW. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. WYSIWYG: Please see all photo's. email with questions. Email with answere's.
|
|
|
Vickers C430CNS 4-Way Valve 3/4"NPT. W/O Lever VALVE1326AC051-1047-HD-MIN2. FREE SHIPPING DISCLAIMER: In order to offer Free Shipping. As well as faster delivery options, eBay's technical requirements force us to select a carrier. We reserve the right to change carriers in order to get the best price and options(Applies to free shipping only, if you select another option we will ship with that option! If you have trouble receiving packages from a particular carrier due to location or some other circumstance, please notify us in your order note. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Description- Vintage 1964 Baldwin Lima Hamilton Hydraulic Turbine Catalogue Sales Brochure SEE OUR OTHER LISTINGS FOR SIMILAR ITEMS Condition: Very nice Condition See photos for details. SEE PHOTOS BELOW. Shipping weight approximately 7 oz- Shipping Time- Items typically shipped within three days of receiving payment. Most items shipped USPS Parcel Post rates. Delivery takes 2-9 business days. Sometimes longer depending on package and delivery location. PLEASE UNDERSTAND I HAVE NO CONTROL OVER DELIVERY TIME OF PARCEL POST PACKAGES. PACKAGES ARE SHIPPED FROM THE WEST COAST AND MAY TAKE MORE THAN 9 DAYS TO REACH EAST COAST. PLEASE TAKE THIS IN CONCIDERATION WHEN LEAVING SHIPPING TIME FEEDBACK. 5 Stars are always appreciated UPON REQUEST faster delivery services are available. Will only charge ... moreactual cost. Shipping Cost- I use EBays postage calculator to estimate cost. If shipping is overcharged I will refund the difference back to your PayPal Account. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f8da0fb83-0x104-
|
|
Description- Vintage 1957 S. Morgan Smith Hydrodynamics Pumps Catalogue SEE OUR OTHER LISTINGS FOR SIMILAR ITEMS Condition: Very nice Condition See photos for details. SEE PHOTOS BELOW. Shipping weight approximately 7 oz- Shipping Time- Items typically shipped within three days of receiving payment. Most items shipped USPS Parcel Post rates. Delivery takes 2-9 business days. Sometimes longer depending on package and delivery location. PLEASE UNDERSTAND I HAVE NO CONTROL OVER DELIVERY TIME OF PARCEL POST PACKAGES. PACKAGES ARE SHIPPED FROM THE WEST COAST AND MAY TAKE MORE THAN 9 DAYS TO REACH EAST COAST. PLEASE TAKE THIS IN CONCIDERATION WHEN LEAVING SHIPPING TIME FEEDBACK. 5 Stars are always appreciated UPON REQUEST faster delivery services are available. Will only charge actual cost. Shipping ... moreCost- I use EBays postage calculator to estimate cost. If shipping is overcharged I will refund the difference back to your PayPal Account.
|
|
|
VICKERS. EHST-3-FVE-30 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
LINKOLN. SL-1 81770-5 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f8f09292a-0x102-
|
|
|
LINKOLN. SL-1 81770-4 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
Inventory Number: 04130774286 Manufacturer: Description: WALLACE& TIERNAN 65-120 PORTABLE PNEUMATIC CALIBRATOR. 1/8" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do ... moreNOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item wi
|
|
Title: Parker Air Cylinder. Series 3MA, 02.50 CBC3MAU19AC 3.000, Used Description: Our Internal Stock# J9-19(6-28-13 dale) You are about to purchase the following item: 1- Parker Air Cylinder. Series 3MA, 02.50 CBC3MAU19AC 3.000, Used Catalog# 02.50 CBC3MAU19AC 3.000 Manufactured: 2012 3" Travel 5/8" Dia. Piston Rod Envelope Pressure- 250 PSI Aluminum Body Construction. Connectors on each end for air supply. Made in USA This unit was taken from a Check fixture Assembly. production Counter read 380. Was built new in 3- 2012. Exceptional condition. Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item ... moreyou will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All items that are bought and payed for before 4 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buye
|
|
|
Flow-Tek 1-1/2" Flanged 150 Ball Valve. VALVE1326AC067-2507-HD-MIN2. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Apollo Conbraco WCB Ball Valve 1000 WOG 1-3/4" NPT VALVE1326AC066-1435-HD-MIN2. FREE SHIPPING DISCLAIMER: In order to offer Free Shipping. As well as faster delivery options, eBay's technical requirements force us to select a carrier. We reserve the right to change carriers in order to get the best price and options(Applies to free shipping only, if you select another option we will ship with that option! If you have trouble receiving packages from a particular carrier due to location or some other circumstance, please notify us in your order note. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Listing Policies 503-489-2392 nstockparts.com 503-489-2392 International Shipping Policy The buyer is responsible for all import duties and/or customs taxes associated with having merchandise imported from the United States. Please consider the total possible price before bidding. Winning, or buying any items from the United States. We do not maintain import tax tables for any country; please contact your local customs office for assistance with determining what your customs tax liability may be. Transaction Policy We reserve the right to cancel bids for any bidder. We reserve the right to cancel a listing prior to close for any reason. We reserve the right to end our listings early. An automatic invoice for the listing's item will be sent to winning buyers shortly after the listing's ... moreclose. Winning buyers must make payment within 5 days of the listing's close. If for any reason the buyer needs to cancel the transaction after the listing's close. The buyer will be required to pay a 10% or less) cancellation fee. Shipping Policy We generally ship within 1 business day. Utilizing both UPS and the United States Postal Service as well as a network of LTL carriers. The shipping price for this listing is for the continental United States only. Additional shipping or handling charges apply to locations such as US territories, Hawaii, Alaska, and countries outside the United States. OTC 100 TON CAPACITY ROLL- BED SHOP PRESS WITH ELECTRIC HYDRAULIC PUMP MODEL# RB100135. LOWER BED ROLLS FOR EASY LOADING AND UNLOADING OF HEAVY WORK. MOVEABLE RAM HEAD AND REMOTE PUMP CONTROL Discount Policy Feel free to contact us to discuss shipping discounts for multiple items. Return policy 14 days money back. All requests for returns must be made within 14 days from the date of purchase. No returns accepted without approval within the 14 day period. Money will be refunded upon receipt of the returned item. Buyer pays return freight. 10% re-stocking fee may apply. Powered by The free listing tool. List your items fast and
|
|
|
VIBCO VS-320 PNEUMATIC VIBRATION UNIT. 3/8" NPT. EXCELLENT USED CONDITION GUARANTEED. FREE SHIPPING TO THE LOWER 48 STATES ONLY. INTERNATIONAL SHIPMENTS UPS ONLY. COST TO BE CALCULATED. P6) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f9157dba1-0xff-
|
|
|
FOR SALE: EDGE SWEETS HYDRAULIC POWER UNIT BALDOR 3 PHASE TEN HP MOTOR CONDITION'GREAT. NOT UNDER POWER' BUYER IS RESPONSIBLE FOR LOCAL PICKUP OR FREIGHT ARRANGEMENTS WITHIN FIVE DAYS PLEASE COMPLETE PAYMENT WITHIN THREE DAYS WE EXCEPT PAYPAL ONLY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f947e88c8-0xfc-
|
|
|
AT AUCTION TODAY VEKTEK CYLINDER MODEL 20-1110-01 ALL USED BUT IN GOOD WORKING ORDER Free Shipping All items shipped via USPS Priority Mail within 1 business day of payment. As most of my auctions SHIPPING IS FREE to the lower 48. I guarantee all auctions to be as described or your money back. I am always willing to combine lots to lower shipping costs if you buy more than one item from me. Just email after the sale for totals.
|
|
|
From lab clear out. Cat 3OUV41V. HT A17763 316CW 30K PSI. Weight approx 0.6Kg. UK post £3.
|
|
|
From lab clear out. The metal cased one is OK but the other two have cloudy liquid and a cracked face. With approx 0.9m of pipe. Face dia approx 57mm. Weight approx 1Kg. UK post £5.
|
|
Title: Parker Air Cylinder. Series 2MA, 02.50 CBC2MAU39AC 5.500, Used Description: Our Internal Stock# J9-27(6-28-13 dale) You are about to purchase the following item: 1- Parker Air Cylinder. Series 2MA, 02.50 CBC2MAU39AC 5.500, Used Catalog# 02.50 CBC2MAU39AC 5.500 Manufactured: 2012 5.500" Travel 1" Dia. Piston Rod Envelope Pressure- 250 PSI Aluminum Body Construction. Connectors on each end for air supply. Made in USA This unit was taken from a Check fixture Assembly. production Counter read 380. Was built new in 3- 2012. Exceptional condition. Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item ... moreyou will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All items that are bought and payed for before 4 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure bu
|
|
|
LINKOLN. SL-44 83749-2 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
here we have for auction a fantastic hytorc(marketed as mult-hy) sqv p6 torque wrench head. Punches well above its weight with a max torque of 600lbft and weighing around 1.5kg! Ideal for tight spaces where the unit can be held with 1 hand. Serviced 11 months ago and never used in anger since. Selling due to being surplus to requirements. Listed with 99p start and no reserve so will sell to the highest bidder. Will post overseas but please message me for a quote first. Thanks for looking and happy bidding. On 30-Jun-13 at 23:02:18 BST. Seller added the following information: Made an error with the the max torqueIts actually 710lbftHere is a link to the hytorc site with full charthttp:www.hytorc.com/images/stories/torquecharts/sqv/SQV.6-Torque-Chart.pdf. On 30-Jun-13 at 23:08:09 BST. Seller ... moreadded the following information: Also this is 3/4" drive.
|
|
Inventory Number: 05130190709 Manufacturer: Description: ENIDINE ADA 505 HYDRAULIC SHOCK ABSORBER. 16mm BORE, 50mm STROKE, 2000N Capacity: Model Number: Serial Number: Additional Information: NEW OLD STOCK. QUANTITY AS SHOWN, SEE PICTURES, SET MAY BE INCOMPLETE? BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at ... moretime of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional item
|
|
|
Allison transmission MT600 rebuild tools by Kent Moore Tools 17- piece. Converter lifting tool, spring compressors, bushing drivers, front pump sring compressor, sun shaft holder, shift adjusting tool, clutch clearance gages& converter end play tool.
|
|
|
pulled from working medical laserl.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13fa2ce3ee7-0xff-
|
|
|
Metek Precision pneumatic hand air pump for calibration. Taylor air pressure drop measuring device and a Dwyer 475 Manometer. Hoses, squeeze bulb with gauge and calibration tools.
|
|
|
FESTO COMPACT CYLINDER ADVU-25-10-P-A. ITEM REMOVED FROM A FACTORY STORES NOT WRAPPED. UNUSED SURPLUS STOCK SOLD AS SELLER REFURBISHED. ALL FULLY TESTED ANY INFO JUST SEND ME A MAIL PNEUMATIC SERVICES YORKSHIRE FOR ALL YOUR ON-SITE PNEUMATIC NEEDS CONTACT- pneumaticsuk@gmx.com MOBILE 07538321551 FOR ALL YOUR ON-SITE PNEUMATIC NEEDS ON-SITE PNEUMATIC SERVICES TO THE FOOD AND ENGINEERING INDUSTRY E-BAY UK LARGEST STORE FOR PNEUMATIC EQUIPMENT 25 YEARS WITHIN THE PNEUMATIC INDUSTRY Posted with
|
|
|
Hartmann& Braun AG(Ipsen) Bitric M 1B B. 61021 F.6.502366.9 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
Hartmann& Braun AG(Ipsen) Bitric N PID arw P.61035-0-2104400 F.6.400063.9.Used Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
Came off one of those golf ball. Machines you drive around scooping up all the balls. Every thing on the machine was hydraulic, great for the inventor at heart. Selling cheap. Sold as is,as pictured, Posted with
|
|
|
Used Weatherhead T400 hydraulic hose crimper with 120VAC pump. Unit function tested and operates ram as expected(did not have any fittings or hoses to test with) Comes with 1/4. 1/2, 3/4 and 1 inch dies(1 inch die is missing one anvil) T400-8 and T400-62 rings. Unit has some rust from storage but did not appear to affect operation. $850. Shipping costs are the responsibility of the buyer, unit may have to be palletized(estimated weight approx 140 lbs without pallet)
|
|
|
Flaring tool in metal box with four screw-on tips looks to be in fair but usable condition. Weight of everything is about 28 ounces. USA only. 14 day return.
|
|
This auction is for one used Numatics Flexiblok with 6 Solenoid Model# 082SA415K Manifold. Bank 110-120v AC 150 PSI. It was pulled from working equipment and is in great condition, what you see in photo is what you get. If you are looking at it you know what it is and how much they cost new. PLEASE READ ALL DETAILS BEFORE BIDDING ASK QUESTIONS BEFORE BIDDING IF YOU BID ON THE AUCTION YOU ARE AGREEING TO OUR TERMS AND CONDITIONS. IF YOU DO NOT AGREE OR UNDERSTAND OUR TERMS AND CONDITIONS. PLEASE ASK QUESTIONS BEFORE BIDDING. AUCTION MOST BE PAID FOR WITHIN TIME FRAME STATED. DO NOT TRY TO MAKE US PAY FOR SHIPPING AFTER YOU WIN THE AUCTION. AFTER YOU WIN THE AUCTION. DO NOT GIVE US LIST OF DEMANDS AND SAY IF WE DON'T DO THEM YOUR NOT GOING TO PAY US. IF YOU HAVE SPECIAL REQUESTS CLARIFY ... moreTHEM WITH US BEFORE YOU PLACE A BID. PLEASE CONTINUE READING THE REST OF THE CONDITIONS BELOW ALL THE WAY TO THE END BEFORE BIDDING. Check Out My Other Auctions I have 100% Positive Feed Back. Save us as a favorite seller so you can check back to see new auctions for all kinds industrial surplus. Because I will be listing alot more in the future. Unless other wise noted items are offered for sale as is where is and make no warranty. Guaranty or representation of any kind. The item may have flaws and/or defects because this is a used item. If you win the auction and your not completely satisfied when you receive item. Email me within 3 days of receiving item and ask for a return authorization approval and you can return it for a refund minus listing& shipping fees. Buyer pays all return shipping costs. International bidders must contact me for approval before bidding. Check Out My Other Auctions I have 100% Positive Feed Back. I ship orders twice a week so allow up to 4 days handling before I ship. If you need something shipped out ASAP or expedited. Email me first and I might be able to accomodate you. Save us as a favorite seller so you can check back to see new auctions for all kinds industrial surplus. Because I will be l
|
|
|
I have a used KarryKrimp hose crimper up for bid. It is in good working condition and it comes with#4. 6, 8, 12 and 16 dies. It also has both die rings. It comes with a Enerpac 110v hydraulic pump. I will ship it for free if BIN is used(must be in lower 48) Please ask question before you bid. Posted with
|
|
|
VICKERS. SV4-10V-0-0-00 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
VICKERS. RV5-10-S-0-35 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
VICKERS. FCV7-10V-S-0-NV(K) Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
VICKERS. DG4V-3S-OB-M-FTWL-B5-60 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13fac718b32-0xfb-
|
|
|
VICKERS. DG4V-3S-2AL-M-FTWL-B5-60 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13fac718b4c-0xfb-
|
|
|
VICKERS. DG4S4LW-012N-B60 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
VICKERS. DG4V-3S-22A-M-U-H5-60 + UPF2S-CL-06-F-W3-S-M-U-H5-20 Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
VICKERS. CPF1S-06-B-W-1-20(234453) + DICPFS-06-05-10(2304072) Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
Nullmatic Controller by Moore Products Co. Model: 50 MF B/M: 8640-3S2. Inspected and Approved Moore Products Co. tag attached. This item could be unused but I cannot be certain. So must assume it is used. Shipping will be USPS Priority Mail in a Medium Flat Rate box. Cost will be $12.35 paid by the buyer. Will be shipped within 2-3 business days of receiving payment.
|
|
|
SMC. IN313-TA1(OMRON B100-OD211-SM) Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL-express write me and I will answer how much it would cost you.
|
|
|
7149 Used. Wilkerson R16-02-L00 Pneumatic Filter/ Regulator, regulator has 3/8" ports, Wilkerson filter M26-040-FM0 has 1/2" ports. Condensate valve at bottom of filter bowl is broken. Gauge is 30psi liquid filled. Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 7149 Location: GRG-R06-P15-S05-0002975 c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13fb68587fc-0xed-
|
|
You are buying one item. Numatics 01MA4 This unit is used. Payment is expected within 72 hours unless other arrangements have been made. We have many related items. So make sure to check them all out. Questions? Please contact us. If there is not enough information on this listing please contact us and we can try to help you! Make sure to check out all of our auctions which start out as low as 99 CENTS! Check out my! Be sure to add me to your! Location: S-162 Please Note: When the"Best Offer" feature is used the actual shipping cost will be calculated and you will be invoiced accordingly. Please remember that we are all human. We will do our best to describe each item to the best of our ability. If you have any questions or concerns please feel free to contact our friendly staff ... moreand we will try to help you anyway we can. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK PLEASE CONTACT US AND WE WILL TRY OUR BEST TO MAKE THINGS RIGHT WITH YOU! Shipping: An item shipped via UPS will have insurance. If there is any issue with the handling of your shipment please contact UPS. International Bidders Please make sure you have provided us with a Phone# or your shipment may be delayed. NEED OVERNIGHT OR EXPRESS? PLEASE CALL OR EMAIL US! We can provide a price. And usually ship same-day! WE ALWAYS LEAVE FEEDBACK! IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE DO THE SAME. WE TAKE PRIDE IN BUILDING A STRONG FEEDBACK REPORT. On Jul-07-10 at 17:35:33 PDT. Seller added the following information:
|
|
|
This is a rebuilt Vickers PVE19 pump. The plate. Pistons, and barrel have been lapped and polished. All the seals and bearings have been replaced, as well as the shaft. The unit has been tested for leaks and operation. The pump is a load sense unit, but can convert to pressure comp. It is a CCW rotation, has a 7/8- 13 spline shaft, a 2 bolt"B" mount, and has#16 pressure port, a#20 suction port, and a#10 case drain port. If you have any questions I'll be glad to answer them as best I can.
|
|
LUBRIQUIP 3500PSI BY PASS VALVE ASSEMBLY G 00 Search LUBRIQUIP BY PASS VALVE ASSEMBLY USED CONDITION G 00 3500PSI ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA 20 SW6 KM 7/1/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be ... morecontacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the item. RcmdId ViewItemDescV4,Rl
|
|
|
You are bidding on a used. And WORKING PORTABLE DEAD WEIGHT TESTER. with original manual. Spec: Range 10 psi- 1500 psi. Accuracy: 1/10% of 1% or 1 psi stand. It comes with a tripod and original manual. Case is scratched. As it is used. It is for calibration of pressure devices and gauges. Weight of dead weight is 30 lbs. Tripod weighs 5 lbs.
|
|
Please Read Item Description& Our Terms and Conditions Below Before Bidding! IBM 72W Autio/Air Adapter 73P4502 Tested Working IBM 72W Autio/Air Adapter 73P4502 Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Please Be Sure To Sign Up For My Store News Letter To Receive Information On Great Deals And Special Promotions! Take A Moment And Visit Our Ebay Store USA Sales Only Since we deal in surplus our auctions do NOT fall into eBay's black and white idea of Used and Not Working item categories. Some items we can only partially test because we don't have all of the item parts or know how to fully test. But it does not mean they don't work. We list ... moreour auctions as well as we can, so please bid accordingly. CTR Surplus Listing Terms All items are SOLD AS-IS Unless otherwise stated in the auction. Some exceptions: Auctions stated Tested-Working and New(NOT New- Old Stock) will be refunded if the item(s) has a problem(as in- not working properly or at all) But the item must be returned at the Buyer's cost, and we must be contacted within 14 days of delivery. The item must be what we sold 100% serial numbers, model numbers, all included parts from the auction, size, shape, color, what was pictured/mentioned, etc. Also shipping from the auction is not refunded. All auctions must be paid for with in 10 Days of end of auction and all end of auction notifications will be sent to your registered Ebay email address. Shipping If you select a higher grade of shipping other than UPS Ground. Please e-mail me because eBay does not notify us of the change! We ONLY use UPS and we do not use UPS accounts! We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. It is the buyer's responsibility to contact us on combined shipping. Most items will be shipped UPS Ground and automatically insured for the bi
|
|
|
USED BUT ONLY IN TESTING NOT IN A PRODUCTION SETTING dispense measured shots of mastics. Epoxies, sealants, greases and other viscous materials. The ejectors are true positive displacement measuring devices which accurately dispense material onto the work piece. MAKE OFFER
|
|
|
the auction is for an used HYDRAULIC POWER TEAM PUMP SERIES P462 2 SPEED in good workng conditions. im selling this pump as is no more pieces included just the pump. it works fine. WHAT YOU SEE IS WHAT YOU GET. winner pays for shipping and handle $45.00 to the lower 48 states. The item will be sent by a FeDex ground. Buyer must pay within 5 days after auction is finished, if you are located in hawaii, canada or alaska please contact me for shipping cost. THANKS FOR LOOKING, PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. ANY QUESTION E-MAIL ME thanks and good
|
|
Description of Item(s) I have a Logan Logansport Machine Company Orange 3 ring Binder.It holds 8" X 11" papers and dividers. It is empty. It's all intact with some black marks as it was used in the machine shop at one time in Logansport. Indiana. Check out my other items! PLEASE READ ALL THIS CAREFULLY BEFORE BIDDING! I am sorry I cannot offer free shipping. I don't sell in quantity. I would never make any money if I did offer free shipping. What I can offer is that I do not charge a handling fee. I charge what the post office charges me as close as I can get it. It may be a little higher due to the eBay calculator is a close estimate. I ship as light as possible without adding any unnecessary weight to the item and box. I use priority boxes from the Post Office unless it's ... morefirst class shipping. Domestic First Class Shipping is UP TO 13 ounces! If it weighs 13.1. It must go Priority. There are no other options. PO rules. Not mine. No International Shipping! I accept ONLY PAYPAL. According to the eBay Rules. IF you pay at Paypal you must provide a CONFIRMED ADDRESS* see below} I do make exceptions when you are mailing to another for a gift or you are having it sent to your work address if you email me before you bid. I mail Monday thru Saturday. I use carrier pickup on all shipments as I print ALL postage online now. I suggest insurance but it is at your option. ALL OF MY ITEMS FOR SALE ARE As Is& as I described to the best of my knowledge and research. My items are STORED IN A SMOKE/PET FREE HOME! Thanks for looking!
|
|
Enerpac P-141 Hydraulic Hand Pump 2 EA QUICK DISCONNECT HOSES TENSION/COMPRESSION LOAD FRAME TECHNOVATE GAGE PRESSURE 1000 PSI TENSION 100 LBS COMPRESSION 100 LBS USED IN EXCELLENT CONDITION SEE PICTURES Our Auctions: We like to have several of pictures of the item we are selling in our auctions so that you the buyer can see exactly what you are buying. Please look at all of the pictures before placing a bid. On occasion we sell multiple items that are identical. If that is the case we may use the same picture for each sale. What you see is what you get. Unless stated otherwise in the description. If you have any questions please ask BEFORE placing a bid! If possible 24 hours before the end of the auction. Merchandise: We do not make any guarantees on the functionality of items. Unless stated ... moreotherwise. If an item is states as being“untested” this is to expressly state that we either did not have the means, or the time to properly test the equipment, therefore, we cannot guarantee it will work properly. Compatibility is not guaranteed. We will not be held liable for any incidental or consequential damages related to the use or misuse of this item under any circumstances. I the seller reserve the right to cancel this auction at anytime. Thank you for your interest in our items! Have a great day! We accept Paypal and Personal/Company checks. If you pay with a Personal or Company check the item will be held for 7 business days before we ship to make sure the check has cleared. Washington State buyers will have sales tax added to the final cost of your item. There should be a shipping Tab at the top of this page. Please check the shipping costs before placing a bid. INTERNATIONAL BIDDERS CONTACT ME. Our handling fees are included in the quote that the freight calculator shows you. Our fees vary depending on the size. Weight, and packaging needed to ship the item as safely as possible to you! If you want to know the handling fee for your item just ask. We do not have any hidden charges! We ship UPS.UNLESS it is bo
|
|
|
33979 Parts Only. Warren Rupp 031-055-000 LOT of Pilot Valve Assembly Kits, Carefully review pictures, may not be complete kits. Item is intended as parts source only- actual working function unknown. Austin Surplus SKU: 33979 Location: GRG-R04-P07-S02-0015076
|
|
|
H&B(Hartmann& Braun AG) Ipsen) M1APID arw 115V Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
SCHLEICHER. DZ 52-SG Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fc0cdb3c2-0xff-
|
|
|
KROM SCHRODER. TZI 5/15 115V(34326025) TRANSFORMER IGNITION Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
KROM SCHRODER. PFF600 110-240VAC(84372020) Used Warranty- 3 months. Removed from working equipment. Price for 1 item. I sent items to the buyer next business day after receiving money. Parcel will be sent as registered prioritaire(AVIO) If you need to receive parcel by DHL– express write me and I will answer how much it would cost you.
|
|
|
BOSCH RACINE PVQ-926413 GREENLINE STACKER VANE PUMP
|
|
|
Oilgear 407932-902 Connector. Used With no Cover. Free Shipping. I will ship international. 14 Day return policy.
|
|
This Stanley CS05 saw appears to be new without package 13 in. Saw blade brand new with package. And with manual. Stanley’s hydraulic chain saws offer the highest power-to-weight ratio of any chain saw on the market today. They’re ideal for bucket truck use because of their wide range of flow and pressure requirements. Used around the world by utility companies. Professional tree trimmers and construction crews. Safety has been designed in- all models feature interlocking triggers, hand guards, low kickback bars and chains. Hydraulic power doesn’t require a flywheel to smooth power pulses so there is no chain coasting when you release the trigger. Kickback is also reduced without the centrifugal force from the flywheel used on gas driven saws. Features a floating rim sprocket for longer wear ... moreand easy replacement. With an optimum input flow of only 5 gpm/ 20 lpm. The CS05 is ideal for applications where the hydraulic power source is limited to 5 gpm/ 20 lpm. HTMAType I)
|
|
|
AIRTAC SOL SPRING VALVE. SOLD AS REFURB. JUST OLD STOCK NOT USED PNEUMATIC SERVICES YORKSHIRE FOR ALL YOUR ON-SITE PNEUMATIC NEEDS CONTACT- pneumaticsuk@gmx.com MOBILE 07538321551 FOR ALL YOUR ON-SITE PNEUMATIC NEEDS ON-SITE PNEUMATIC SERVICES TO THE FOOD AND ENGINEERING INDUSTRY E-BAY UK LARGEST STORE FOR PNEUMATIC EQUIPMENT 25 YEARS WITHIN THE PNEUMATIC INDUSTRY Posted with
|
|
|
This Fairmont hydraulic demolition hammer(breaker) is part of a pallet of hydraulic tools we kept as collateral for a loan. The model number is unknown. There are no markings on the tool aside from what is shown in the pictures. It was hooked up to a continuous flow hydraulic pump and worked as it should. The two chisels pictured are not included, but will be listed separately if you are interested in them! I believe that it will take a variety of bit sizes, but the one that was pulled out of it measured 1 1/8" at the widest part of the hex end. Any other questions, please contact me! I will do my best to answer everything as fast as possible. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13fcd248387-0xef-
|
|
Enerpac PUD 11008 1/2HP Hydraulic Power Unit Runs on 115V Single Phase, Click to View Image Album Click to View Image Album Click to View Image Album This HPU has barely been used and comes complete and fully functional. Retail is about $2100. so here is a great chance to save. Hydraulic hose has a nick in the jacket but the it appears to be more cosmetic then functional. Lightweight design allows easy transport and can be run from generators or on long extension cords. I am listing this on consignment and have not tested it. I am depending on the owners condition statement. If their is a problem contact me immediately and I will make it right! Need more info: call me at 949.294.2171 days. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to ... moredo business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we
|
|
|
You're looking at a Decco oil immersed solenoid. Model 17-697. This is untested, but looks good. Offers are welcome. Please note that the shipping price is for domestic orders only- international shipping may be much more. Feel free to contact us with any questions via ebay. By giving us a call during business hours at 651.646.8653, or by visiting our St. Paul store!
|
|
This auction is for one used SMC 2 Solenoid Manifold. Bank 24v DC. It was pulled from working equipment and is in great condition, what you see in photo is what you get. If you are looking at it you know what it is and how much they cost new. Check Out My Other Auctions I have 100% Positive Feed Back. Save us as a favorite seller so you can check back to see new auctions for all kinds industrial surplus. Because I will be listing alot more in the future. Unless other wise noted items are offered for sale as is where is and make no warranty. Guaranty or representation of any kind. The item may have flaws and/or defects because this is a used item. If you win the auction and your not completely satisfied when you receive item. Email me within 3 days of receiving item and ask for a return authorization ... moreapproval and you can return it for a refund minus listing& shipping fees. Buyer pays all return shipping costs. International bidders must contact me for approval before bidding. Check Out My Other Auctions I have 100% Positive Feed Back. I ship orders twice a week so allow up to 4 days handling before I ship. If you need something shipped out ASAP or expedited. Email me first and I might be able to accomodate you.
|
|
Open box. But never installed. SMC's IZS31 Ionizer Series eliminates dust and static electricity on workpieces. It is an ideal tool for food packaging processes such as shrink wrapping. Labeling and screen printing. It is also ideal for preventing ESD damage in semiconductor and flat panel display manufacturing.Features: NPN Output Tungsten Electrode Needle Without Sensor With End Brackets(No Center Bracket) 3 m Power Supply Cable 380 mm Bar Length Close Spacing of + and– Electrodes Allows for Even Removal of Static Charge3 Different Modes of Operation: Pulse DC, Sensing DC, DC Mode— Feedback Sensor(Sold Separately) is Needed to Use the Sensing DC Mode Maintenance Function Detects Loss of Ion Generation Efficiency Optional Ion Balance Sensor Allows for Automatic Adjustment to Within ±30 ... moreV Self Contained— Power Supply Integrated 3 Different Electrode Materials: Monocrystal Silicone(Standard) Tungsten& Stainless Steel(Sold Separately) Applications Include Handling Sensitive Semiconductor Devices and Sheet Materials Low Power Consumption(24V/4W)
|
|
|
Blackhawk Industrial Gauge GF20. It's about 5 in. across in used condition has very little wear on it looks almost new. Thanks for lookin. free shipping
|
|
FESTO DISTRIBUTION MANIFOLD CPV-18-VI 18220 Search FESTO DISTRIBUTION MANIFOLD USED CONDITION CPV-18-VI 18220 ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS AND FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. 21 AKR SW6. 7/10/2013 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you ... morewill be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the item.
|
|
FESTO DISTRIBUTION MANIFOLD CPV-14-VI-P4-1/8-B Search FESTO DISTRIBUTION MANIFOLD USED CONDITION CPV14-VI-P4-1/8-B ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS AND FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. 21 AKR SW6. 7/10/2013 MOD KM 7.10.13(1) We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order ... morewill be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the
|
|
FESTO VALVE MANIFOLD CPV-10-VI 18200 Search FESTO VALVE MANIFOLD USED CONDITION CPV-10-VI 18200 ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS AND FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. 15 AKR SW6. 7/10/2013 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. ... moreWe apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the item.
|
|
|
MOOG VALVE: MODEL: 77-520SD SER: GB1 US PAT NO: 3228423 THIS VALVE HAS BEEN SAT ON A SHELF FOR AT LEAST TEN YEARS.
|
|
|