|
|
Order by: |
0 bids $650.00 Shipping
Condition: Used Location: Irvine, United States
DoAll Horizontal Band Saw C-4 12' x 9'. DoAll 9" x 10" Horizontal Band Saw, C-4. With Mat'l Conveyor. Local PICK UP - We can assist with loading. 230/460V 3 phase 60 cycle ( currently wired for 440V).
Buy It Now
$1.00 Shipping
Condition: Used Location: Miami, United States
Item is used and in working condition. Item was being used until 10/03/22. Automatic feeder needs service.
Buy It Now
Free Shipping
Condition: Used Location: Middlebury, United States
Prefer to pick it up yourself?. Will there be a dock or forklift. Size: Length: 72 in. Width: 40 in. Height: 56 in. Tested and works as it should. Warehouse Location: NA8131. To get a freight quote we will need to know the following.
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Manufacturer: DOALL. Diversion of any products contrary to United States law is prohibited. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Diversion of any products contrary to United States law is prohibited. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
0 bids Free Shipping
Condition: Seller refurbished Location: Cincinnati, United States
Blade Speeds: 60 - 300 FPM. 3 HP Blade Drive Motor, 230/460/60/3. Blade Size: 138" x 1" x. 035". Manual Blade Tension. Capacity, 90 Degrees, Round: 9". Capacity, 90 Degrees, Rectangle: 9"H x 18"W. Capacity, 45 Degrees, Round: 8".
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Diversion of any products contrary to United States law is prohibited. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Model Number: H9AW. Manufacturer: KALAMAZOO. See details below. Larger pallet sizes cost more. Capacity: 19" X 9 1/2". (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Free Shipping
Condition: New Location: Suwanee, United States
Model 414464. J-9180-3, 7 in. Zip Miter Horizontal Band Saw - 414464. Zip Miter Horizontal Band Saw. Heavy-duty cast iron saw head and sturdy base. Horsepower 1. Bed Height 35-7/8 in. Cutting Capacity - 45 Degrees (Round) 4-1/2 in.
0 bids $4.97 Shipping
Condition: Seller refurbished Location: Addison, United States
Wells No.5 & No.8 Horizontal Band Saw. Operator Instructions & Parts Manual. Printed Manual. Loaded with illustrations, instructions, photos, and diagrams.
0 bids Free Shipping
Condition: Seller refurbished Location: Cincinnati, United States
WELLSAW HORIZONTAL BAND SAW. MODEL: 1016. 2 HP Blade Drive Motor. Blade Size: 1" x. 035" x 11'6". Blade Speeds: (4) 50 to 275 FPM. Manual Rite Tension Blade Tensioning. Reconditioned March 2025. Capacity, Flat: 10"H x 16"W.
Buy It Now
Free Shipping
Condition: New Location: Suwanee, United States
Model 414560. HVBS-712D 7 in. Deluxe Horizontal / Vertical Band Saw - 414560. Deluxe Horizontal / Vertical Band Saw. Large 10 in. infeed table assembly extends the support area and can be used in either horizontal or vertical positions.
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Model Number: 343. Manufacturer: W. F. WELLS AND SONS. Diversion of any products contrary to United States law is prohibited. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
0 bids $16.00 Shipping
Condition: Used Location: Fairfax, United States
0 bids Free Shipping
Condition: Used Location: Bay Shore, United States
Buy It Now
Free Shipping
Condition: New – Open box Location: Goddard, United States
For models: 3410, 3410. Wilton Model 3400, 3410 Horizontal Band Saw. Reprinted from original manual using high quality 24lb. Parts List. Condition of original : Very Good. Publication/Revision Date: 07/04.
0 bids Free Shipping
Condition: Used Location: Cincinnati, United States
Blade Speeds 70 - 380 SFPM. 9" x 18" WF WELLS SEMI-AUTOMATIC HORIZONTAL BAND SAW. 9" x 18" WF Wells W-9-1 Horizontal Band Saw. Square Capacity 32". Blade Drive Horsepower 3 HP (3-Phase). Approximate Machine Height 63".
0 bids Free Shipping
Condition: Used Location: Stone Mountain, United States
DoAll 2013-V3 20" Variable Speed Vertical Band Saw. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers.
Buy It Now
Free Shipping
Condition: New – Open box Location: Goddard, United States
Wilton Model 3130, 3230 Horizontal Band Saw. For models: 3130, 3230. Reprinted from original manual using high quality 24lb. Parts List. Condition of original : Very Good. Publication/Revision Date: 03/04.
0 bids Free Shipping
Condition: Used Location: Elk Grove Village, United States
Nice condition Amada Horizontal, Fully automatic Bandsaw model HA-400W with 7.5 HP blade drive and 1.5" Heavy duty blade, chip conveyor, parts counter and multiple stroke. Famous Amada Quality HA-400 W 16" Capacity bandsaw, Fully Automatic, 7.5 HP Variable.
0 bids Free Shipping
Condition: Used Location: Hamilton, United States
Type (Auto, Manual, Semi) Manual. Blade Width 1/2". Rect-Cap (H) 7".
Buy It Now
Free Shipping
Condition: Used Location: Holland, United States
DOWN FEED VARIABLE. CAPACITY RECTANGLES 9" X 16". BLADE SPEEDS (4) 50 125, 200, & 275 fpm. SERIAL 12354. HOLLAND, OHIO 43528.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power: 420W. Horizontal/Vertical Bandsaw. vertical worktable (mm): 245 245. height vertical (mm):1372. cutting capacity at 90°: 100 150 round: 100. cutting capacity at 45°: 100 75 round: 75. machine size (mm): 940 330 965.
0 bids Free Shipping
Condition: Used Location: Sarasota, United States
Model: STARTRITE H250A. Parts counter Material stop ¼ H.P. Hydraulic pump motor ¼ H.P. Material feed motor 2 H.P. Main motor Machine is wired for 230 volt / 3 phase / 60 H.Z. Machine weight- 1250 Lbs.
Buy It Now
Free Shipping
Condition: New Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Kysor Johnson Horizontal Band Saw Model J-Series Instruction & Parts Manual. I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly.
0 bids Free Shipping
Condition: Used Location: Stone Mountain, United States
(Model: H9AW. Marvel 81/11 Vertical Bandsaw. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers. Cause of Action?).
0 bids $13.99 Shipping
Condition: Used Location: Middlebury, United States
Removed From A Wells & Sons W-9 Horizontal Bandsaw Serial No. 752205. Prefer to pick it up yourself?. Will there be a dock or forklift. Weight (lbs, oz): 4. Warehouse Location: F0023. Need it urgently?.
Buy It Now
Free Shipping
Condition: New Location: Harrison, United States
NEW Amada/Marvel Model: SA460WPC. Model SA460WPC. Horizontal Mitering Saw. Inputs include Part Length from 0-999.999” and the Number of Pieces to be cut. Hydraulic vices hold the work piece, providing accurate cuts and longer blade life.
0 bids Free Shipping
Condition: Used Location: Waco, United States
This is an Eisele Automatic horizontal Bandsaw that can Miter up to 45 degrees. Currently wired up for 240 3phase but can be wired up for 480 3phase quickly and easily. But this does not hinder operation at all.
Buy It Now
$359.00 Shipping
Condition: New Location: Duluth, United States
Features: 1. The maximum processing capability of BAND SAW BS-1018 is 10"(254mm) 2. High-capacity due to controlled by motor 3. Can rotate from 0° to 45° 4. has the advantage of quickly clamping. 5. features a belt driven and has four cutting speed. 6. The falling speed of saw bow is controlled by hydraulic cylinder 7. With a sizing device, machine will stop automatically after sawing materials 8. With power break protection device, machine will power off automatically when the rear protective cover is opened 9. With coolant system, can prolong the service life of saw blade and improve the precision of work piece .
0 bids Free Shipping
Condition: Used Location: Guilford, United States
Model: W.F. WELLS W-9-1. W.F. WELLS. Horizontal Dual Column Band Saws. Rect-Cap (H).
0 bids Free Shipping
Condition: New Location: Rosemead, United States
3 Phase motor. Hydraulic Down Feed. Round at 90 Degrees Round at 45 Degrees Rectangle at 90 Degrees 4"L x 19"W. 5-1/2"L x 40"W x 4" DEPTH. 20 x 69 x 43.
0 bids Free Shipping
Condition: Used Location: Stephenville, United States
Good working condition
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
JET J-9180-3 7" Zip Miter Horizontal Bandsaw 230V 3PH. Motor (HP) 1 HP, 230V, 3Ph. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service.
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Model Number: H75A. See details below. Larger pallet sizes cost more. Manufacturer: HEM. Capacity: 11" X 15". (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Vertical worktable (mm): 245 245. height vertical (mm):1372. cutting capacity at 90°: 100 150 round: 100. cutting capacity at 45°: 100 75 round: 75. motor (w): 1/2HP(4P)(420). blade speed (m/min):24.36.61.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Model: HB280A. Prefer to pick it up yourself?. Will there be a dock or forklift. Need it urgently?. Call us and we will do what we can to get it to you quickly. Condition: Used. To get a freight quote we will need to know the following.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Size: Length: 92 in. Width: 32 in. Height: 60 in. implied or. We choose the carrier. Unless otherwise specifically agreed to in writing by. Prefer to pick it up yourself?. LOCAL PICK-UP.
0 bids Free Shipping
Condition: New Location: Elk Grove Village, United States
Manufacturer: INDOTECH. INDOTECH DC-26 SA. 25.5" Capacity Dual Column, Horizontal Heavy Duty bandsaw, Semi-Automatic. TYPE (AUTO, MANUAL, SEMI) Semi. State of the art Four Point Pillar Type Hydraulic Blade Tensioning.
Buy It Now
$640.90 Shipping
Condition: New Location: 朝阳区, China
Linear speed of saw blade: 21/33/50m/min. Saw blade size: 1638 x 12.7 x 0.65mm. Motor power: 750W. Motor speed: 1380 r/min. Product model: GFW5012. Sawing size: 115mm 100x140mm.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Blade drive is 3Hp Baldor motor, all other ancillary motors are 1Hp. Power Vise opens to 15-1/2". Conveyor is 10" roller width and 14" outside width. Conveyor can be reversed via operator panel. Includes 2 sections of power roller conveyor 19.5' assembled length.
Buy It Now
$959.00 Shipping
Condition: New Location: Duluth, United States
Cut Rectangular @90° 18"x9.8" (460x250mm). Cut Rectangular @60° 8"x9.8" (205x250mm). Cut Rectangular @45° (Right) 12"x9.8" (305x250mm). Standard coolant system make the saw blade life longer. cutting 13 in at 90°.
Buy It Now
Free Shipping
Condition: Used Location: Los Angeles, United States
7" x 12" Central 7020, Used. Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to your computer's browser.
0 bids Free Shipping
Condition: New Location: Rosemead, United States
49 x 16 x 42 (Horizontal) - 49 x 16 x 65 (Vertical). Blade Speed Blade Size 27/41/59/78 MPM(60Hz) - 22/34/49/64 MPM (50Hz). 4.75" x 4.88" (120 x 125mm). Circular @ 90 degree Rectangular @ 90 degree.
0 bids Free Shipping
Condition: Used Location: Stone Mountain, United States
DoAll 2013-V3 20" Variable Speed Vertical Band Saw. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Removed From A Wells & Sons W-9 Horizontal Bandsaw Serial No. 752205. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Free Shipping
Condition: Used Location: Watertown, United States
0 bids Free Shipping
Condition: Used Location: Elk Grove Village, United States
HEM Saw Fully automatic, Mitering Bandsaw with Parts counter and multiple stroke, Coolant system and All Available manuals. Full Auto operation, Mitering, parts Counter, Multiple feed, Coolant system and all available manuals.
Buy It Now
$4.95 Shipping
Condition: New Location: Ashtabula, United States
3/4" x 93" Long. Made In USA.
0 bids $13.99 Shipping
Condition: Used Location: Middlebury, United States
Removed From A Wells & Sons W-9 Horizontal Bandsaw Serial No. 752205. Will there be a dock or forklift. To get a freight quote we will need to know the following Model: W-9. Need it urgently?. Call us and we will do what we can to get it to you quickly.
4d 2h 26m 6s 0 bids
$500.00 Now
$95.94 Shipping
Condition: New Location: Tracy, United States
The Model W1715 can easily be set up for vertical cutting operations to make cuts that are not a straight cut through the entire workpiece, such as curves or pattern cuts. The W1715 features a cast iron stop for use when making horizontal cuts.
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
Removed From A Wells & Sons W-9 Horizontal Bandsaw Serial No. 752205. Unless otherwise specifically agreed to in writing by. To get a freight quote we will need to know the following Need it urgently?.
0 bids Free Shipping
Condition: For parts or not working Location: Venice, United States
Clausing Kalamazoo. Manual Horizontal Bandsaw. The hydraulics function without issue. Blade Speed - 50 to 295 SFPM. Cutting Capacity (Rectangular) - 10” x 16”. Cutting Capacity (Rounds) - 10”. Venice, FL 34285.
0 bids Free Shipping
Condition: For parts or not working Location: Euclid, United States
Manufacturer: DOALL. Diversion of any products contrary to United States law is prohibited. Capacity: 18" X 13". (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
0 bids Free Shipping
Condition: Used Location: Erin, United States
The DoAll C-4 horizontal metal cutting band saw is a reliable and efficient tool for any metalworking project. With a maximum cutting capacity of 10 inches in diameter, 9 inches in length, and 16 inches in width, this electric saw is capable of handling a variety of materials. The manual control allows for precise cuts and the three-phase power source ensures consistent performance. This band saw is ideal for use in metalworking shops, fabrication facilities, and manufacturing settings. The DoAll brand is known for its quality and durability, making this model a great investment for any business or industrial project.
Buy It Now
Free Shipping
Condition: Used Location: Holland, United States
FEED FORCE (VARIABLE) 0 TO 300 LBS. AUTOMATIC BAR FEED 0" TO 16" MAXIMUM. LOAD CAPACITY 5600 LBS. BUNDLE CUTTING (NESTING) YES. COOLANT PUMP 1/8 HORSEPOWER. CAPACITY (ROUND) 12". BLADE SPEED (VARIABLE) 65 TO 330 SFPM.
0 bids Free Shipping
Condition: Used Location: Louisville, United States
0 bids Free Shipping
Condition: Used Location: Fountain Valley, United States
ROLL-IN #HW1212 12" X 10" MITRE HORIZONTAL BAND SAW. -- 12" ROUND. -- AGE: 3/2018. -- 12" X 10" RECTANGLE.
Buy It Now
Free Shipping
Condition: New Location: , United States
BAILEIGH INDUSTRIAL. Blade Width 3/4 in, Cutting Capacity Square 7 in, Power Source Corded, Blade Thickness 0.035 in, Hz 60 Hz, HP 1 hp, Includes Blade. & Industrial. Light Industrial. & Recepticles. Electrical Outlets.
0 bids Free Shipping
Condition: Used Location: Dubuque, United States
This is in good used condition.
|
|
|
|