|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , China
Y Y axis absolute coordinates. I When the arc is machined, the center coordinate value is reduced by the X axis starting point value. When the arc is machined, the center coordinate value is reduced by the Y axis starting point value.
0 bids Free Shipping
Condition: New Location: Duluth, United States
GREAT PRODUCT TO ADD TO YOUR PLASMA CUTTING OPERATION! Plasma Cutting. 3 Pieces total - 1 top, 1 bottom & 1 Base. CUT OUT BEND & WELD!
Buy It Now
$29.88 Shipping
Condition: New Location: , China
It has perfect cutting technology and 10.4”color display screen and integrated keyboard panel. Convenient operation for users, manual gram by in-built or external keyboard. Industrial ARM cess core, large-scale gate array hardware interpolator.
Buy It Now
$12.98 Shipping
Condition: New Location: 普陀区, China
Excellent Compatibility: All inputs and outputs are optically isolated. - Simple Interface: It is suitable for all plasma cutting CNC systems. And it can be used alone. Without linear regulator components, its stability is dramatically improved.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. Tip ø 1.7mm- 100A. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
Buy It Now
Free Shipping
Condition: New Location: , China
◆ Torch Model: Longevity Forcecut 42i 62i and ESAB TecmoEverlast® PowerPlasma 50s - 62i. ◆ Torch Model: IPT-60 PT60 PTM-60 Plasma Torch NON HF Pilot Arc 60Amp. ◆ Consumables type:Plamsa Torch. 1PCS Torch.
0 bids $5.00 Shipping
Condition: New Location: , China
1 x F2300A. - Support oxygen gas, plasma, dusting, demonstration. - DB15 core male two-axis motor drive interface. - DB25 core female connector, 16 channels of photoelectric isolation output, with a maximum reverse current of 300mA.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. SCOPE OF APPLICATION: Wide clamping range, torch range from 12mm‑38mm, suitable for a variety of work scenarios. DURABLE STAINLESS STEEL: Stainless steel is strong and durable, TBI ball screw with smooth shaft and linear sliders at both ends, colloidal torch stabilized by linear sliders.
Buy It Now
Free Shipping
Condition: New Location: Pottstown, United States
Replacement Hand Torch Electrodes for the Eastwood Versa-Cut 40 CNC Plasma Cutter. Pack of 5 hand torch electrodes.
0 bids Free Shipping
Condition: New Location: , China
Arc starting relay and the arc starting success relay use power relays for Omron, which work reliably. - The effective level of input signal can be set. The input signal is valid when the default is low level.
Buy It Now
$4.00 Shipping
Condition: New Location: , China
1 x Connection Cable. Usually it costs about 30USD-50USD. - High sensitivity button.
Buy It Now
Free Shipping
Condition: New Location: , China
The system has high reliability design, with anti plasma interference, anti-lightning and surge capacity. -It has the function of the extension and perforation of thick plate, and the bridging function is suitable for the thick plate.
Buy It Now
$100.00 Shipping
Condition: New Location: , China
Motor used: 24V DC motor. 1 x Pressure Divider. Host size: 145 90 42mm. Cylinder: double action/single action optional. Drive mode: PWM. Form: thimble. Model: MY-D25. 1 x Main Box.
0 bids Free Shipping
Condition: New Location: , China
Includes jig (torch range 12mm-38mm). The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN proximity switches.
Buy It Now
$5.83 Shipping
Condition: Brand New Location: , China
Includes jig (torch range 12mm-38mm). Working stroke: 100mm. The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN proximity switches.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Technology：IGBT&Inverter. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve the user experience. IGBT technology makes the body lightweight and easy to carry.
Buy It Now
Free Shipping
Condition: New Location: , China
0 bids $19.99 Shipping
Condition: New Location: , China
Includes jig (torch range 12mm-38mm). In order to maintain the cutting accuracy of the machine and pport the plasma arc positioning function, it is equipped with NPN proximity switch. Lift inside a plasma arc positioning.
0 bids $5.00 Shipping
Condition: New Location: , China
Using industrial grade chip for ARM, featuring low power consumption, low heat generation, and no forced heat dissipation; suitable for complex working conditions. - High hardware integration, mature and stable design, capable of preventing strong plasma interference, lightning strikes, surges, etc.
Buy It Now
$49.60 Shipping
Condition: New Location: , China
During cutting courses, the current always equals the given current. The torch height will keep constant under regular speed. both above-water and under-water cutting)， Plasma Shield. HS style: Switch inspecting IHS (suitable for all plasma.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. Tip ø 1.5mm- 80A (most common). Tip ø 1.3mm- 60A.
0 bids $21.79 Shipping
Condition: New Location: , China
Buy It Now
$0.60 Shipping
Condition: Brand New Location: , China
Model Number: P80. Rated welding current: 100A. THIS TORCH CONSUMABLES ARE SUITABLE FOR CUT-70. Max Cutting thickness: 40MM.
0 bids Free Shipping
Condition: New Location: , China
Buy It Now
$950.00 Shipping
Condition: New Location: Burnet, United States
That allows us to maximize capabilities and automate the most complicated aspects of CNC Plasma Cutting.You don't need any CNC or Plasma Cutting experience! There's no wrong button to press and all of the detailed cutting information required by most CNC software has been automated.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
Buy It Now
Free Shipping
Condition: Brand New Location: Crystal Brook, AU
CNC PLASMA TABLE PT-2412 PLANS. Why not build your own CNC Plasma Tablewith easy to follow comprehensive Scaled Drawings at a fraction of the cost of a bought machine?. CNC Plasma PT-2412. “Plans only”.
Buy It Now
$113.00 Shipping
Condition: New Location: , China
5, the cutting torch lifting speed: 1000mm/min - 5000mm/min. 2, drive mode: PWM way.
0 bids Free Shipping
Condition: New Location: 金东区, China
Buy It Now
Free Shipping
Condition: New Location: , China
In addition.
Buy It Now
Free Shipping
Condition: New Location: , China
Supporting oxygen gas, plasma, dusting and demonstrates modes. Humanization design all the key switch, comfortable and convenient. - Can be used for advertising plasma cutting machine. - Axis: 2 (can be customized for three axis).
Buy It Now
$0.60 Shipping
Condition: Brand New Location: , China
Model Number: P80. 10 Nozzle. Max Cutting thickness: 40MM.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
1 x F2300A. - Support oxygen gas, plasma, dusting, demonstration. - DB25 core female connector, 16 channels of photoelectric isolation output, with a maximum reverse current of 300mA. - DB15 core male two-axis motor drive interface.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
Interpretation of Jumper Switch Not: If open the sender, there is also a 8-bit jumper switch inside. Therefore in. When it is set to short. - Receiver module is set into 8421 port mode or P2P mode, at most 16 output ports.
Buy It Now
$57.30 Shipping
Condition: New Location: , China
Includes jig (torch range 12mm-38mm). Working stroke: 100mm. The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN proximity switches.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
The clear operation panel and intuitive data display are convenient for users to operate and greatly improve the user experience. IGBT technology makes the body lightweight and easy to carry. Inverter technology enables the persistence of machine work.
Buy It Now
Free Shipping
Condition: New Location: , China
Supports plasma dynamic piercing. - The system has a built-in nesting function: quickly combine nesting cutting of multiple parts. - Keyboard: PCB film keyboard. - User storage space: 4G. - The system can be upgraded via a U disk, which is convenient, simple and practical.
Buy It Now
$12.98 Shipping
Condition: New Location: 普陀区, China
Excellent Compatibility: All inputs and outputs are optically isolated. - Simple Interface: It is suitable for all plasma cutting CNC systems. And it can be used alone. Without linear regulator components, its stability is dramatically improved.
Buy It Now
Free Shipping
Condition: New Location: , China
Anti-Collision Function: When the torch tip touches the workpiece, THC will automatically lift torch up to IHS height to avoid crashing. It is effective both in Manual/Automatic mode. Support dynamic piercing and collision output to CNC.
Buy It Now
Free Shipping
Condition: New Location: , China
Supports plasma dynamic piercing. - The system has a built-in nesting function: quickly combine nesting cutting of multiple parts. - Keyboard: PCB film keyboard. - User storage space: 4G. - The system can be upgraded via a U disk, which is convenient, simple and practical.
0 bids Free Shipping
Condition: New Location: 金东区, China
P80 Compatibility: This cutting torch is compatible with P80 consumables, allowing for precise and efficient cutting in various materials. Body, Hand, CNC Cutting: The plasma cutting machine head is square-shaped and equipped with a comfortable handle, making it suitable for both hand-held and CNC cutting applications.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. Tip ø 1.7mm- 100A. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
Buy It Now
Free Shipping
Condition: New Location: , United States
60 AMP 110/ 240 V PILOT ARC PLASMA CUTTER - 2020 MODEL w POWER 50/60 A S G-55 TORCH. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). Overheat protection starts as soon as the unit is overloaded.
Buy It Now
Free Shipping
Condition: New Location: , China
Motor used: 24V DC motor. 1 x Pressure Divider. Host size: 145 90 42mm. Cylinder: double action/single action optional. Drive mode: PWM. Form: thimble. If item is defective after one months, you can still send it back to us.
Buy It Now
Free Shipping
Condition: New Location: , China
Motor used: 24V DC motor. 1 x Pressure Divider. Host size: 145 90 42mm. Cylinder: double action/single action optional. Drive mode: PWM. Form: thimble. We will work on resolving your particular case ASAP.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
Body, Hand, CNC Cutting: The plasma cutting machine head is square-shaped and equipped with a comfortable handle, making it suitable for both hand-held and CNC cutting applications. P80 Compatibility: This cutting torch is compatible with P80 consumables, allowing for precise and efficient cutting in various materials.
0 bids Free Shipping
Condition: New Location: , China
Linked Axis No. 2 axis. It has perfect cutting technology and 10.4”color display screen and integrated keyboard panel. With 2.4GHZ Wireless Remote (Gift). It has functions of moving, positioning, speedup, speeddown, cutting processing and so on.
0 bids $52.00 Shipping
Condition: New Location: , China
Supporting oxygen gas, plasma, dusting and demonstrates modes. - Compact keyboard type design, make more comprehensive manual input file. - Axis: 2 (can be customized for three axis). Toy & Hobbies.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. Tip ø 1.3mm- 60A. Tip ø 1.1mm- 40A.
Buy It Now
Free Shipping
Condition: New Location: , China
Plasma depends on the power. Tilt angle of cutting: +- 45 degree. Gas for cutting: Propane gas. Cutting mouth: default as GO3.
0 bids $5.00 Shipping
Condition: New Location: , China
1 x Connection Cable. Usually it costs about 30USD-50USD. - High sensitivity button.
0 bids $49.00 Shipping
Condition: New Location: Morrice, United States
1pc 25ft long cable, IPTM80 CNC plasma torch(straight torch for CNC table). 1-Handheld cable IPT80,25ft long. 10pcs plasma torch consumables. This machine is CNC table ready for our GOFABCNC table.
0 bids Free Shipping
Condition: New Location: , China
Consumables Type: Plasma Cutter Electrode + Tip Nozzle. Plasma Electrode Reference Number: SC8004 WSP-061002. Plasma cutting torch consumables are made by WS, not original. Fit for torch model: SC80 plasma torch unimig razor cut 45 cutter.
Buy It Now
Free Shipping
Condition: New Location: , China
Automatic two-speed positioning to improve positioning accuracy, protect the torch, and extend the life of the protective cap. - Underwater protective cap positioning and proximity switch positioning.
Buy It Now
$3.00 Shipping
Condition: New Location: , China
It has the function of cutting compensation, and detects whether the compensation in the program is reasonable, and makes corresponding reports for users to choose;. Arbitrary selection and perforation point processing function;.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
Supports plasma dynamic piercing. - The system has a built-in nesting function: quickly combine nesting cutting of multiple parts. - User storage space: 4G. - The system can be upgraded via a U disk, which is convenient, simple and practical.
0 bids $50.00 Shipping
Condition: New Location: , China
It has perfect cutting technology and 10.4”color display screen and integrated keyboard panel. Convenient operation for users, manual program by in-built or external keyboard. Industrial ARM process core, large-scale gate array hardware interpolator.
Buy It Now
Free Shipping
Condition: New Location: , China
◆ Non-HF PT100 PT-100 IPT100 IPTM100 Plasma Cutting Torch CNC Machine Gun 6M/20ft Central Adaptor 4Pin. ◆ 1pcs X CNC Torch. ◆ Gas pressure:4.5-5.0 bar. ◆ Using Gas: Air/ Nitrogen. ◆ Duty cycle: 100Amp 100%.
Buy It Now
Free Shipping
Condition: New Location: , China
In addition. ◆ Torch Head Body C1354. ◆ CEBORA CP160 Plasma Cutter Torch Head Body. ◆ Machine Torch Head Body. ◆ Straight Torch Head Body. ◆ Pencil Torch Head Body.
|
|
|
|