|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , China
◆ Torch Model: Longevity Forcecut 42i 62i and ESAB TecmoLongevity® FORCECUT 42I 62I 82I. ◆ Torch Model: IPT-60 PT60 PTM-60 Plasma Torch NON HF Pilot Arc 60Amp. In addition.
Buy It Now
Free Shipping
Condition: New Location: , China
◆ Torch Model: Longevity Forcecut 42i 62i and ESAB Tecmo. ◆ Torch Model: IPT-60 PT60 PTM-60 Plasma Torch NON HF Pilot Arc 60Amp. ◆ Consumables type:Plamsa Torch Body. 1PCS Torch body. ◆ Product Information.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
The clear operation panel and intuitive data display are convenient for users to operate and greatly improve the user experience. IGBT technology makes the body lightweight and easy to carry. Inverter technology enables the persistence of machine work.
Buy It Now
Free Shipping
Condition: New Location: , China
Fits TECMO® PT-100 (iPt-100) Plasma Torches used on LONGEVITY®Forcecut 82i. Pins setup for Everlast® PowerPlasma CuttersThis torch also available for Longevity®, Lincoln® - and many others. EVERLAST® PowerPlasma 100, PowerCut 80s, HTP®.
Buy It Now
Free Shipping
Condition: New Location: Santa Fe Springs, United States
0 bids Free Shipping
Condition: New Location: , China
Includes jig (torch range 12mm-38mm). The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN proximity switches.
Buy It Now
Free Shipping
Condition: New Location: , United States
60 AMP 110/ 240 V PILOT ARC PLASMA CUTTER - 2020 MODEL w POWER 50/60 A S G-55 TORCH. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). Overheat protection starts as soon as the unit is overloaded.
Buy It Now
$38.86 Shipping
Condition: Brand New Location: Greenacre, AU
The SCM80R Plasma Torch is designed to be used with CNC equipment on the RAZOR CUT 45 & RAZOR CUT 80. It features patented arc striking technology to provide high-quality and reliable cuts every time, without the use of high frequency. This results in superior consumable life cycles.
Buy It Now
$1500.00 Shipping
Condition: New Location: Las Vegas, United States
The STV CNC® SparX™ Plasma Table Series incorporates high end machine features and capabilities, in a smaller package. Using our high accuracy stepper motors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle half-inch steel plates (but they can handle more). Made in the USA. Our SparX™ Plasma Table is designed for businesses rooted in auto-repair, industrial manufacturing, agriculture, architecture, and a host of other industries which can all benefit from the business improvements an STV CNC® branded CNC plasma cutting table can bring.
0 bids $5.00 Shipping
Condition: New Location: , China
Excellent Compatibility: All inputs and outputs are optically isolated. - Simple Interface: It is suitable for all plasma cutting CNC systems. And it can be used alone. Without linear regulator components, its stability is dramatically improved.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
Supports plasma dynamic piercing. - The system has a built-in nesting function: quickly combine nesting cutting of multiple parts. - User storage space: 4G. - The system can be upgraded via a U disk, which is convenient, simple and practical.
Buy It Now
Free Shipping
Condition: New Location: , China
1 x Anti-collision Fixture. Need your item fast?. Weight: 1kg. 2 x Proximity Switch (for Anti-collision gun function).
0 bids Free Shipping
Condition: New Location: , China
Linked Axis No. 2 axis. It has perfect cutting technology and 10.4”color display screen and integrated keyboard panel. With 2.4GHZ Wireless Remote (Gift). It has functions of moving, positioning, speedup, speeddown, cutting processing and so on.
0 bids Free Shipping
Condition: New Location: , United States
Machine ICUT60P x1. IGBT CUT60 With Pilot Arc Plasma Cutting Machine 220V Single. Inverter IGBT technology,large power switch. 60A & Consumable. MAX cutting thickness:18MM. Easy to arc,less splash,low noise,smaller size,lighter weight,easy to take.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
The clear operation panel and intuitive data display are convenient for users to operate and greatly improve the user experience. IGBT technology makes the body lightweight and easy to carry. Inverter technology enables the persistence of machine work.
Buy It Now
Free Shipping
Condition: New Location: Pacific, United States
Thermal Dynamics® Cutmaster 40 & 42. new Quick Disconnect torch connector - fits Thermal Dynamics® Cutmaster 40 & 42 Plasma Cutters. Replaces SL40 Hand Plasma Torch. These torches use HYPERTHERM® Parts.
Buy It Now
$29.88 Shipping
Condition: New Location: , China
It has perfect cutting technology and 10.4”color display screen and integrated keyboard panel. Convenient operation for users, manual gram by in-built or external keyboard. Industrial ARM cess core, large-scale gate array hardware interpolator.
Buy It Now
Free Shipping
Condition: New Location: , China
◆ 1PCS x CNC SHand Torch Body. ◆ Using Gas: Air/ Nitrogen. But you do need to carefully confirm your needs!
Buy It Now
Free Shipping
Condition: New Location: , China
◆ Torch Model: IPT-60 PT60 PTM-60 Plasma Torch NON HF Pilot Arc 60Amp. ◆ Consumables type:Plamsa Torch. 1PCS Torch.
Buy It Now
Free Shipping
Condition: New Location: , HK
For hand torch, best result cutting amp: 80A (use with 1.5mm tip).
0 bids $68.99 Shipping
Condition: New Location: , China
During cutting courses, the current always equals the given current. Lift motor: DC24V DC motor. The torch height will keep constant under regular speed. HS style: Switch inspecting IHS (suitable for all plasma. ).
Buy It Now
Free Shipping
Condition: New Location: , China
The system has a built-in nesting function: quickly combine nesting cutting of multiple parts. - Supports plasma dynamic piercing. - User storage space: 4G. - The system can be upgraded via a U disk, which is convenient, simple and practical.
0 bids $49.99 Shipping
Condition: New Location: , China
It has perfect cutting technology and 10.4”color display screen and integrated keyboard panel. Convenient operation for users, manual program by in-built or external keyboard. Industrial ARM process core, large-scale gate array hardware interpolator.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
Buy It Now
Free Shipping
Condition: New Location: , China
◆ 228735 1pcs. ◆ Powermax105 ® Duramax® hand/machine torch consumables. ◆ Reference number : Duramax 180° torch front mounting sleeve228735. ◆ Powermax45 ® Duramax® hand/machine torch consumables. ◆ Powermax65 ® Duramax® hand/machine torch consumables.
Buy It Now
Free Shipping
Condition: New Location: , China
Motor used: 24V DC motor. 1 x Pressure Divider. Host size: 145 90 42mm. Cylinder: double action/single action optional. Drive mode: PWM. Form: thimble. The manufacturer does not necessarily endorse use of these products.
Buy It Now
$950.00 Shipping
Condition: New Location: Burnet, United States
That allows us to maximize capabilities and automate the most complicated aspects of CNC Plasma Cutting.You don't need any CNC or Plasma Cutting experience! There's no wrong button to press and all of the detailed cutting information required by most CNC software has been automated.
Buy It Now
$950.00 Shipping
Condition: New Location: Burnet, United States
That allows us to maximize capabilities and automate the most complicated aspects of CNC Plasma Cutting.You don't need any CNC or Plasma Cutting experience! There's no wrong button to press and all of the detailed cutting information required by most CNC software has been automated.
Buy It Now
Free Shipping
Condition: New Location: , China
◆ PF0112 1PCS. But you do need to carefully confirm your needs!
0 bids Free Shipping
Condition: New Location: , China
Model: P80. P80 plasma cutting torch: 5m/16ft. Interface model: M16 1.5, two-pin aviation plug, pilot arc line. Ignition: Pilot Arc. Applicable machine：CUT50P,CUT60P,CT418P,520TSCP. Length: 16feet/5m.
Buy It Now
$90.00 Shipping
Condition: New Location: East Lansing, United States
120AMP Plasma Cutter 3 phase 440V,CNC TABLE READY, PowerEdge120,include 1-26ft long cable, PE120C CNC plasma torch(straight torch). 1-25ft long cable, PE120H Handheld plasma torch. 10pcs plasma torch consumables.
Buy It Now
Free Shipping
Condition: New Location: , China
�1�78�1�75 supports 4 modes: oxygen gas, plasma, powder spraying and demonstration. �1�78�1�75 compact keyboard design, but the function is not simple, making manual input file more comprehensive. Support suffix TXT, CNC, NC, MPG, B3 and other G codes.
0 bids $3.00 Shipping
Condition: New Location: , China
During cutting course, the current always equals the given current. l Running transfer: Alternative Arc transfer and pierce transfer. l Lift motor: DC24V DC motor. l Output current：1A-4A. Installation position: Keep away from heat, air convection good place.
Buy It Now
Free Shipping
Condition: New Location: , China
The system has high reliability design, with anti plasma interference, anti-lightning and surge capacity. You can also enter the nesting screen. Under the main interface, the key functions are as follows.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
0 bids Free Shipping
Condition: New Location: 金东区, China
Buy It Now
$4.00 Shipping
Condition: New Location: , China
1 x FastCAM Software CD. - CNC Expert Version: There is limit on steel plate size (Width up to 1.8m and length up to 6m). It supports automatic typesetting, automatic common edge cutting and bridging.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
0 bids Free Shipping
Condition: New Location: Las Vegas, United States
4x8 CNC Plasma Cutting Machine By Garage Fab. Machine specifications for the Garage Fab 4x8 CNC. Included with the Garage Fab 4x8 CNC Plasma Machine Needed for the Garage Fab 4x8 CNC Plasma Machine .
0 bids Free Shipping
Condition: Used Location: Brighton, United States
(Almost) Complete CNC Plasma Cutter System (Hypertherm + Avid CNC). Hypertherm Powermax 65 with machine and hand-held torches. electronic relay for plasma trigger. Pickup in Boston, MA. Smooth stepper.
Buy It Now
$3.00 Shipping
Condition: New Location: , China
Difference between F2300B and 2300A The keyboard of 2300A is on the right side of the screen, and the keyboard of F2300B is below the screen. - Support oxygen gas, plasma, powder spraying, demonstration.
Buy It Now
Free Shipping
Condition: New Location: , China
Plasma depends on the power. Tilt angle of cutting: +- 45 degree. Gas for cutting: Propane gas. Cutting mouth: default as GO3.
Buy It Now
Free Shipping
Condition: New Location: Pottstown, United States
Replacement Machine Torch Nozzles for the Eastwood Versa-Cut 40 CNC Plasma Cutter. Pack of 10 machine torch nozzles.
0 bids Free Shipping
Condition: New Location: , China
120925 Plasma Cutter Swirl ring For Hyper therm Powermax1650 Plasma Torch. Torch Model: Plasma Nozzle for Powermax1650 Plasma Torch. Consumable Type: Plasma Vortex Ring. Compatible with all Thermal Power Cutmaster series plasma cutters.
0 bids $50.00 Shipping
Condition: New Location: East Lansing, United States
80AMP Plasma Cutter 1 phasev220V,CNC TABLE READY FOR GOFABCNC TABLE, come with CNC STRAIGHT TORCH IPTM100 torch, PowerEdge80,include:1-remote control and remote cable.1-30ft long cable, IPTM100 CNC plasma torch.1-air regulator,1-hose.1-ground cable.10pcs plasma torch consumables.1-cnc cable 26ftThis is low frequency machine, IF YOU HAVE OTHER BRAND OR MOPHORN portable CNC flame cutter, PLEASE CONTACT US.Condition is "New". Shipped with UPS Ground.Return is accepted in 30 days, buyer pays for shipping.5 years warranty for machine.New LCD display. The screen is bigger.
0 bids Free Shipping
Condition: New Location: , China
Body, Hand, CNC Cutting: The plasma cutting machine head is square-shaped and equipped with a comfortable handle, making it suitable for both hand-held and CNC cutting applications. P80 Compatibility: This cutting torch is compatible with P80 consumables, allowing for precise and efficient cutting in various materials.
Buy It Now
Free Shipping
Condition: New Location: , China
Supports plasma dynamic piercing. - The system has a built-in nesting function: quickly combine nesting cutting of multiple parts. - Keyboard: PCB film keyboard. - User storage space: 4G. - The system can be upgraded via a U disk, which is convenient, simple and practical.
Buy It Now
Free Shipping
Condition: New Location: , China
All key switches are human oriented designed, and they are very convenient and comfortable. -1 x User Manual. Usually it cost about 35USD-50USD.
Buy It Now
$40.00 Shipping
Condition: New Location: , China
Includes jig (torch range 12mm-38mm). Working stroke: 100mm. The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN proximity switches.
0 bids Free Shipping
Condition: New Location: , China
CNC Plasma Cutting Retaining Cap YK02601 For YK330. But you do need to carefully confirm your needs!
Buy It Now
$3.00 Shipping
Condition: New Location: , China
1 x Connection Cable. Usually it costs about 30USD-50USD. - High sensitivity button.
0 bids $50.00 Shipping
Condition: New Location: , China
During cutting courses, the current always equals the given current. The torch height will keep constant under regular speed. both above-water and under-water cutting)， Plasma Shield. HS style: Switch inspecting IHS (suitable for all plasma.
Buy It Now
$950.00 Shipping
Condition: New Location: Burnet, United States
All PowerEdge Plasma Cutters have 100% Duty Cycle at Full Power! That allows us to maximize capabilities and automate the most complicated aspects of CNC Plasma Cutting.You don't need any CNC or Plasma Cutting experience!
Buy It Now
$950.00 Shipping
Condition: New Location: Burnet, United States
All PowerEdge Plasma Cutters have 100% Duty Cycle at Full Power! That allows us to maximize capabilities and automate the most complicated aspects of CNC Plasma Cutting.You don't need any CNC or Plasma Cutting experience!
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This Torch Consumables are compatible with P80 Plasma Cutting Torch and similar copies; And it is suitable for Plasma Cutting Machine CUT-70 CUT-80 CUT-100 CUT-120. Tip ø 1.7mm- 100A. The Nozzle Shield is made by CuCrZr, which brings longer life and abrasive resistance.
Buy It Now
Free Shipping
Condition: New Location: Pottstown, United States
Replacement Hand Torch Wire Guides for the Eastwood Versa-Cut 40 CNC Plasma Cutter. Pack of 2 hand torch wire guides.
Buy It Now
$9.88 Shipping
Condition: New Location: , China
Includes jig (torch range 12mm-38mm). Working stroke: 100mm. The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN ximity switches.
Buy It Now
$49.80 Shipping
Condition: New Location: 朝阳区, China
Y Y axis absolute coordinates. I When the arc is machined, the center coordinate value is reduced by the X axis starting point value. When the arc is machined, the center coordinate value is reduced by the Y axis starting point value.
Buy It Now
Free Shipping
Condition: New Location: , China
Applicable machine：CUT50P,CUT55P,PLC55P,CUT60P,CT418P,520TSCP,LTP7000,LTP8000,LGK60,LGK80,LGK100. Model: P80. P80 plasma cutting torch: 3M、5M、7M、10M. Length: 10 /16 /23 /35feet.
Buy It Now
Free Shipping
Condition: New Location: , China
EVERLAST® 60S, PowerPlasma 70S, PowerCut 80s, HTP®. Pins set for Everlast® Machine (Pins 4 & 7 Pilot Arc, 1, 9 Cup Switch). AHP® AND OTHER PLASMA CUTTERS WITH PT-80/iPT TORCH SYSTEM. Fits TECMO® PT-80 (iPt-80) Plasma Torches used on LONGEVITY® 62i.
|
|
|
|