|
|
Order by: |
0 bids $5.00 Shipping
Condition: Used Location: Carrollton, United States
Here we have a used Greenlee 3037AV bushing for use with 3-1/2" through 5" knockout punches. This item is dirty, greasy, and rusty. It should be cleaned up with a wire brush and oiled before use for best results.
Buy It Now
Free Shipping
Condition: New Location: Paramount, United States
Letter & Number Stamping Punch Set w/ Case. CR-V steel drop forged, heat treated, sandblasted finish. Durable plastic boxes included for storage.
0 bids Free Shipping
Condition: Used Location: Overland Park, United States
Greenlee Knockout Punches. 1/2" - 3/4" - 1" - 1-1/4" Conduit Punches with 2 Bolts & Leather Pouch.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
MILWAUKEE TOOL. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids Free Shipping
Condition: Seller refurbished Location: Brenham, United States
Dies are almost in new condition. This tool was tested.
Buy It Now
Free Shipping
Condition: New Location: Longview, United States
Each punch stamped with size and Wilde USA (will not fade).
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
MILWAUKEE TOOL. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Buy It Now
Free Shipping
Condition: Used Location: Bismarck, United States
Buy It Now
$7.00 Shipping
Condition: New Location: Downey, United States
Item new never been used.
Buy It Now
Free Shipping
Condition: New Location: Walton, United States
Nail set is a great tool to recess nails into wood trim. Punches are used to drive objects, such as nails, or to form an impression of the tip on a workpiece. A center punch is used to mark the center of a point.
0 bids Free Shipping
Condition: Used Location: Stamford, United States
It includes everything in the photos, even the extra draw studs.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
• For use with 7804SB, 7806SB, 7906SB. Model GREE 34983. Greenlee 34983 Specifications Greenlee 34983 Features • Empty Carry Case Only . Full Factory Warranty.
Buy It Now
Free Shipping
Condition: Used Location: Brick, United States
Vintage GREENLEE No. 735BB Knockout Punch *With Leather Case!***Made In USA!***
0 bids $9.99 Shipping
Condition: Used Location: Lebanon, United States
Excellent condition No owners marksChassis punches create a hole as markedWgsf4-3I will combine shipping
Buy It Now
Free Shipping
Condition: Used Location: Lake Forest, United States
Introducing the Greenlee 13/16" (Round) Radio Chassis Punch, designed and manufactured in the United States by Greenlee. Its compact size and durable construction make it an essential item for anyone looking to punch holes cleanly and easily without the need for an expensive machine.
Buy It Now
Free Shipping
Condition: Used Location: Andrew, United States
These are used greenlee 710 metal stud punch 1-11/32 diameter hole punch.you are getting one per listed price an i have 7 of these a will just ship whichever one as they sell.you can see they are some just painted different colors from CONTACTOR that had them.these all do show cosmetic wear scratches/scuffs and marked up.(HWBRA)
Buy It Now
$5.00 Shipping
Condition: New Location: Warner Robins, United States
1.36" hole size.
Buy It Now
Free Shipping
Condition: New Location: Hayward, United States
Up for sale we have a new Maximus MHP-20 Electric Hydraulic Hole Puncher with 5 Dies. Heavy Duty MHP-20 Electric Hydraulic Hole Puncher with 6.5mm to 20.5mm Dies. Other sizes include 10mm, 16mm, 19mm hole punch dies.
Buy It Now
Free Shipping
Condition: Used Location: Charlevoix, United States
Greenlee 500-4686 3/4 - 1 1/8" Spacer/Bushing' for use with 3.5"+ Sized Knockout Punch sets. Excellent preowned condition, see pics for actual item you will receive.Shelf #A2C BLUE TRAY ElectricDealsForYou Item #3007.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
MILWAUKEE TOOL. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Buy It Now
Free Shipping
Condition: Used Location: White Bluff, United States
Greenlee Knockout Punch Lot Set Slugbuster 5235BB. You will receive all items as photographed.
Buy It Now
$16.50 Shipping
Condition: Used Location: El Cajon, United States
GREENLEE #1804 KNOCKOUT RATCHET. JUST WHAT IS IN PHOTO
Buy It Now
Free Shipping
Condition: New – Open box Location: Woodruff, United States
Mayhew Tools 21005 Pin Punch, 1/4” x 5 3/4” Long, Full Finish, Model 413, New, USA. New unit from bulk package. Punch remains in perfect unused condition. USPS First Class Mail shipping.1/4” punch diameter 3/8” hex shank 5 3/4” overall length USA made Model 413
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
The FORCELOGIC™ M18™ 10 Ton Knockout Tool is powerful enough to punch up to 4” holes in 10 gauge mild steel, and 12 gauge stainless steel. EXACT™ punches and dies are rated for both mild and stainless steel punching.
0 bids $5.35 Shipping
Condition: Used Location: Gibsonville, United States
GREENLEE No 730 1/2” Round Radio Chassis Punch 12.7 mm - Vintage.
Buy It Now
Free Shipping
Condition: Used Location: Denver, United States
Knockout Tool. Used - Leaks Oil and it's fixable or use for parts.
Buy It Now
Free Shipping
Condition: Used Location: San Jose, United States
Buy It Now
Free Shipping
Condition: New – Open box Location: Cocoa, United States
Model: 735BB.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model GREE 34941. Greenlee 34941 Specifications Greenlee 34941 Features • For use with Slug-Buster Knockout Punch Kit 7238SB. • 1" Hex Ratchet Wrench.
0 bids Free Shipping
Condition: Used Location: Hebron, United States
Greenlee 2-1/2" Conduit Size Knockout Punch 5004175 and Die 5004177. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping
Condition: Used Location: Brighton, United States
A lightly used Greenlee punch set. No visible wear on cutter. ( not sure about the 2 ).
Buy It Now
$3.65 Shipping
Condition: New – Open box Location: Morris Plains, United States
Brand new
0 bids Free Shipping
Condition: New Location: Bainbridge Island, United States
New Greenlee slug buster replacement draw stud3/4” x 2–1/8”. New , no packaging30 day product return protection
0 bids Free Shipping
Condition: New – Open box Location: Pennsauken, United States
Greenlee 737BB Punch Set, 1 1/2 and 2". WARNING Cancer and/or Reproductive Harm ?.
Buy It Now
Free Shipping
Condition: Used Location: Corona, United States
1” Dia Greenlee 5003986 5003987 Knock Out, Punch. ( without original bolt). Free shipping.
Buy It Now
$9.00 Shipping
Condition: Used Location: Williamsburg, United States
I appreciate your understanding in this matter.
Buy It Now
$4.18 Shipping
Condition: New Location: Warren, United States
Made in the USA!
Buy It Now
Free Shipping
Condition: New Location: Monument, United States
Buy It Now
$7.00 Shipping
Condition: New Location: , United States
Draw studs have 3/4-16 threads on one end and 7/16-20 threads on the other end, 4 1/8" long. Studs work with mild steel up to 11 gauge and stainless steel up to 16 gauge.
Buy It Now
Free Shipping
Condition: New Location: Brenham, United States
TEMCo ID: TH0358. Draw studs and spacers are included for all of the above specifications. "I have always been delighted with the service from TEMCo.". About TEMCo. TEMCo Industrial. Requires Hydraulic Punch Cylinder Thread Size.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature： Punching Die Material: Steel Stroke: 25 mm / 1" Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Description: Hydraulic Mechanism 10T.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
Model SOUT PRDS34. • MODEL #: PRDS34. • MAX PUNCH® PRO DRAW STUDS: 3/4" - Main Draw Stud -Model #PRDS34. DRAW STUDS Used with Max Punch® Tools. • (1) Draw stud. Full Factory Warranty.
Buy It Now
$5.99 Shipping
Condition: Used Location: New Port Richey, United States
The Greenlee Rectangle Knockout Punch Set 1", model number 501-3043, is a hand tool used for creating holes in metal sheets. It is designed to be used manually and is part of the Knockout & Punch Sets category. The set includes a punch, die, and draw stud. The brand Greenlee is known for producing high-quality tools for the industrial and construction sectors. Complete in good condition.
Buy It Now
Free Shipping
Condition: New – Open box Location: Cookeville, United States
Milwaukee 49-16-2664 Exact 1" Die for 2677-21 | New This was removed from a 2677-21 6 Ton Knockout Tool 1/2" - 2" Kit.
0 bids $9.00 Shipping
Condition: Used Location: Firestone, United States
Item number = No. 737, 500-4042, and AV439. OTHER DETAILS.
Buy It Now
Free Shipping
Condition: New Location: Racine, United States
This tool will also punch heavy duty drywall grid with ease. Punch can also be used for leather work and other hole punch applications. STRICTLY CEILINGS STANDARD CEILING GRID PUNCH PLIERS. ~Punches both 15/16" and 9/16" ceiling grid.
Buy It Now
Free Shipping
Condition: Used Location: New Smyrna Beach, United States
Buy It Now
Free Shipping
Condition: Used Location: Seattle, United States
YOU ARE BUYING ONE CADDY MSP-20 HEAVY DUTY CAST ALUMINUM 1-11/32" STUD PUNCH FOR 1" THIN WALL.
Buy It Now
Free Shipping
Condition: Used Location: Derry, United States
Greenlee RS-232 25-Pin D-Subminiature Panel Punch.
Buy It Now
Free Shipping
Condition: New Location: Alhambra, United States
Heavy duty precision cutting edges and flutes. Heat treated steel construction. Knurled body for a secure grip.
0 bids $8.00 Shipping
Condition: New – Open box Location: Glendale Heights, United States
New Condition !
Buy It Now
Free Shipping
Condition: New Location: Blue Springs, United States
NEW USA MADE S-K TOOLS MODEL 6153, 3/32" ROLL PIN PUNCH, 4" TOTAL LENGTH.
Buy It Now
Free Shipping
Condition: Used Location: Bay Shore, United States
This Greenlee 1/2" Conduit Knockout Punch and Die set is a must-have for any professional or DIY electrician. Made in the United States, this set is reliable and durable for all your knockout needs. With its precise design, this punch and die set is perfect for creating clean and accurate holes in conduit. Whether you're working on a large scale project or a small at-home repair, this Greenlee set will get the job done right.(ELLE-23)
Buy It Now
$59.00 Shipping
Condition: Used Location: Downingtown, United States
Good working.
0 bids Free Shipping
Condition: Used Location: Loveland, United States
Free Shipping. Shipped Same Day or Next. See pics for exactly what you are buying.
Buy It Now
Free Shipping
Condition: New Location: Paramount, United States
Punch Size: 1/8" (3mm) height. 1/8" 3MM Letter & Number Stamp Set. Drop forged, heat-treated CR-V. Smooth sandblasted finish.
0 bids Free Shipping
Condition: Used Location: Loveland, United States
Free Shipping. Shipped Same Day or Next. See pics for exactly what you are buying.
Buy It Now
Free Shipping
Condition: Used Location: Belton, United States
This Current Tools set includes a 1 1/2 inch and 2 inch Conduit knockout punch and die, making it the perfect addition to your hand tool collection. Ideal for use in the business and industrial sector, this set is designed to punch holes for conduit quickly and easily, without compromising the quality of your work. Whether you're looking to expand your light equipment and tool collection or need a reliable punch and die set for your business, this Conduit Current Tools set is the perfect choice. So why wait? Invest in quality today and enjoy the benefits of superior performance and lasting durability.
Buy It Now
$29.98 Shipping
Condition: Used Location: Mount Vernon, United States
WE DO OUR BEST TO DESCRIBE THE ITEM. WE WILL RESOLVE ANY ISSUES YOU MAY HAVE.
0 bids Free Shipping
Condition: New Location: Chino, United States
A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Up for sale we have a new MY2066 Electric Hydraulic Hole Puncher with 5 Dies Sets.
|
|
|
|
Enerpac SP5 Metal Stud Punch 1 11/32" Diameter Hole Used. In used condition. Length is 21" 1 7/8" opening.
|
|
|
Greenlee 1 1/4" Dia. conduit Knockout punch#1817223. Used but in Excellent condition.
|
|
|
ONE- Greenlee 1 3/8" 730 Radio Chassis Punch 1 3/8" Actual Diameter Punch and Die. Punch is used. But in good shape. Minor scratches/surface rust. Comes as pictured. I personally inspect each punch I sell and do my best to point out anything that I would want to know prior to purchase. I have a large variety of RC punches in stock, with only.60/ea additional shipping. So feel free to check out my other listings and save with combined shipping. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou. 1448
|
|
|
Greenlee Slugsplitter Knockout Punch and Die for 1 1/4" IPS. Stainless KO. Actual diameter of hole would be 43.2mm. Or appx. 1 3/4" I see no signs of use(vertical scratches, wear marks) on this punch. Believe it is new old stock. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1256 Posted with
|
|
| | 40 Pc Neiko Titanium Tap& Hexagon Die Set Metric. 40 piece tap& die with hexagon style set that includes taps and dies from 3MM to 12MM. Made by Neiko Tools USA. The set contains sizes: 3-0.5. 3-0.6, 4-0.7, 4-0.75, 5-0.8, 5-0.9, 6-0.75, 6-1.0, 7-0.75, 7-1.0, 8-1.0, 8-1.25, 10-1.25, 10-1.5, 12-1.5, 12-1.75mm, 1/8' NPT pipe tap. This set also includes an adjustable tap wrench, die stock, screw pitch gauge, and a screw driver. Each tap and die is made from titanium. The entire set comes in a case where each piece has its own place. Actual case received may be plastic or metal. SKU: 8417H. Click Image(s) to Enlarge FREE SHIPPING! PAYMENT: Once you have won an auction you will receive a confirmation email from Toolprice. This email will provide you with a link to purchase and checkout ... morewith payment by PayPal or Credit Card. Our checkout system gives you the ability to combine auction purchases and check order status including tracking information. SHIPPING INFORMATION: Shipping on this item is FREE to the 48 contiguous Unites States. Free shipping does not apply to Alaska. Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO or outside the USA. Most orders are shipped within 2 business days. Please allow 3-6 business days transit time for delivery. Most orders are shipped to your door via guaranteed UPS Ground Delivery Service. Our shipping service covers shipping, handling, and insurance. Sorry, will call is not available. We ship to the USA only. We do not ship to PO Boxes. Or APO/FPO addresses. ABOUT TOOLPRICE Toolprice was founded in 1996 on a simple concept: Offer quality tools at the lowest possible price. Toolprice is a direct importer so there is no middleman. We pass the savings on to you. We stock over 5000 items for both the contractor and the do-it-yourselfer. We have been an eBay seller since 1999 and are proud to have completed over 63.000 successful eBay transactions. ORDER TRACKING: Most orders are shipped within 2 business days. Please allow 3-6 business days transit time for delivery. Yo
|
|
|
This is a used working in good condition Greenlee 1804 Knockout Puller. No draw studs are included. Shipping is $12.00 I will not ever under any circumstance. Including a dispute over condition, pay for return shipping. The Buyer pays return shipping for any item being returned for any reason. I will not give a partial refund for any reason items that offer a guarantee may be returned for a full refund but not kept for a partial refund for any reason.
|
|
|
Used but well taken care of. Still very sharpe puts holes in 2/4 with ease. Posted with{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e543f5ce1-0xfb-
|
|
Up For Sale Today: GREENLEE 746/ 767 HYDRAULIC KNOCKOUT& PUNCH SET PRE-OWNED IN GOOD-FAIR CONDITION SHOWS WEAR FROM NORMAL USE COMES IN CASE WITH EVERYTHING PICTURED THE RIGHT CASE LOCK IS BROKEN OFF PLEASE ASK ANY AND ALL QUESTIONS FREE SHIPPING Shipping: We can only ship to your verified address you have listed on ebay/paypal. Please verify that it is correct before you complete your transaction. If you have just moved or are on going on vacation make sure you change your address before you complete check out) There is an additional shipping charge for large items outside the lower 48 states and PO boxes In addition for large items going west of the Mississippi the shipping price is an estimate and maybe higher. Please contact us first for an exact shipping quote There is also an additional ... morecharge for international orders please contact us first for shipping rates. Every item is not available for international shipping, a feedback score of 50 is also required for international shipping There is a 7% sales tax for NJ residents/accounts Items can be picked up. The sales tax is still required unless your account is from outside NJ and you pay online The shipping charge is not just for getting your item from here to there. It also include boxes, packaging materials, time to pack and time to bring to the post office/UPS Most items are packed up and shipped that day or the day after if it was bought after 3pm Larger items may have a handling time of up to 3 days. Please be patient, if you need/want/or expect a large item send out next day please contact us before you bid/buy and we will try our best to accommodate you Once UPS/USPS have the item we are not responsible for their shipping time. Most times your item will arrive quickly but there may arise some delay, please do not hold us responsible Small CD's and DVD's are sent USPS first class mail Large DVD's/CD/Box sets are sent USPS Media mail iPods. Cameras, other small electronics or valuable items as well as items that are being sent in close pr
|
|
|
Up for Buy it Now or Best Offer is a decent condition. Working GREENLEE 1731 HYDRAULIC KNOCK OUT PUNCH SET 1" 3/4" 1/2" Comes with 1"3/4" 1/2" punches& dies and 2 centering points(one is in the punch, one is in the tray)
|
|
|
I have a Greenlee 7310 Knockout Punch Driver Set for sale it is a complete set. If you have any questions just ask Thank you. Includes: 721-1/2 UPC 31756 1/2 IN Conduit Size Slug-Buster Punch. 14722 UPC 14722 1/2 IN Conduit Size Die, 123AV UPC 04008 3/4 IN Conduit Size Punch, 124AV UPC 06972 3/4 IN Conduit Size Die, 125AV UPC 04010 1 IN Conduit Size Punch, 126AV UPC 04011 1 IN Conduit SizeType: HydraulicWeight: 54.000 LB(24.500 KG) Posted with
|
|
Excellent condition. Includes 3/4" 1 1/4" 1 1/2" 2" Sizes and the cutting side of the 1" tool, but NOT the other half(sorry don't have it, that's why the title does not list 1" Also includes two tightening bolts, case box instructions. Item Thanks for looking! Pics show actual product you will receive! This is a NO reserve auction. Please ask any questions you may have before bidding. Shipping Please take the total cost of ownership into consideration when placing a bid(shipping + final price) I reserve the right to change carriers or service without notice. Most items are shipped within 48 hours of receiving payment(excluding Saturday/Sunday) Some items may take up to 3(three) days to properly package and ship. My auctions typically end on Sunday. And ... moreI ship on Monday. It should go without saying. But if you do not have the money for the item please do not bid. Unpaid items are very time consuming and delay re-listing which is bad for everyone involved. If you pay Sunday your items will be shipped quickly! If you wait. I have a full time job other than eBay and it may take up to three days. If you are sensitive to shipping time. Please inquire about expected shipping delays prior to bidding. Insurance up to $100 is included with FedEX shipments. For items that sell for more than $100. A small charge(about $1 per additional $100) will be added to the invoice, please wait for invoice reception before paying. Unless you specifically request otherwise: Domestic items shipped will be left without signature if the value is below $100. For items valued over $100 or if the address appears to be an apartment. Signatures are required for delivery. Combined shipping is done at the sellers discretion. Similar items won that can be safely packaged in the same box will reduce the total estimated cost by about 40% per item or will add $3-5 for each additional item within weight and size classes. Returns All merchandise is sold'as-is' We will accept returns if an item is significant
|
|
|
GREENLEE 3" CONDUIT KNOCKOUT PUNCH AND DIE NICE GREENLEE 3" CONDUIT KNOCKOUT PUNCH AND DIE PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
|
|
Welcome to Wayne Exchange NO RESERVE AUCTION Featuring a Greenlee Slug Buster Knockout Punch Set 7238SB With Wrench Driver for 1/2" thru 2" Conduit In great pre-owned condition! Shows very little signs of use. Includes: 1" Ratcheting Wrench*1 1/2" Punch and Die*2" Punch and Die*3/8" Draw Stud*3/4" Draw Stud*1/2" Punch and Die*3/4" Punch and Die*1" Punch and Die*1 1/4" Punch and Die Pilot hole size: 1/2" Conduit punch requires 3/8" or larger pilot hole. 3/4" thru 2" conduit punches require 3/4" or larger pilot hole. Instructions also included. Comes just as shown. Please see pictures. Bid it to win it! Check out my other items! Payment We will gladly accept Paypal. If you have any questions regarding this listing ... moreor payment information. Please feel free to email through Ebay or call us at 734-722-2828 We are Open Monday-Friday 10AM. to 6PM. EST. Except Tuesday 10AM. to 3PM. Shipping Continental US shipping and handling is quoted in the auction. I will ship to Canada as well but no longer over seas. All items with a selling price over $250.00 will be shipped with signature confirmation. We offer local pick up in our store at 32413 Michigan Ave. Wayne Mi. 48184. 6% sales tax will be charged for local pick up. Terms of Sale We will describe each item as best we can. Many items we sell are previously used. All items are in working condition unless stated in this listing. We encourage questions to eliminate any misunderstandings. Our return policy is. If you are not satisfied with the product we will refund your purchase price& original shipping within 14 days. Return shipping is the responsibility of the buyer. Refunds will be given as money back. Payment is expected within 5 days of auction end. We will file a dispute for any payment not received in that time. Please read all of our terms& conditions carefully About Us Wayne Exchange Inc. is located at 32413 Michigan Ave. Wayne. MI 48184 We are a Retail Exchange. Buying and Sellin
|
|
|
This punch will make a 15/16 inch hole. It is in good working condition. I accept PayPal and other payment methods. International buyers PayPal only. International buyers. We will not be responsible for non-delivery of items shipped USPS 1st Class International. Buyer pays shippping as calculated below
|
|
|
Five Greenlee Round Radio Knockout Punches 730 Series 1/2" 5/8" 3/4" 11/16" 1 1/16" all in good condition. FREE Shipping to US via USPS Priority Mail. Please ask any questions prior to buying. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13ed3ae7b59-0xfd-
|
|
|
Five piece set of Greenlee knockouts. You will get the following sizes: 1/2" 3/4" 1" 1 1/4" And an extra piece that looks like a shorter version of the 1/2" I am not sure what it is! I ship only to the continental United States Thank you for looking!
|
|
STRIPPIT 8 6J2 HOLE PUNCHING UNIT- USED STRIPPIT 8 6J2 HOLE PUNCHING UNIT INVENTORY# 4070 MODEL: 8 6J2 SPECIFICATIONS: SIZE: 12" L x 2" W x 6-1/4" T 8 THROAT 10 GAUGE MAXIMUM METAL THICKNESS- MILD STEEL MINIMUM RECOMMENDED DIE CLEARANCE.006 FEATURES: A-2 LONG LASTING STEEL. IDEAL FOR PUNCHING ANGLES, I-BEAMS, EXTRUSION AND OTHER FORMED PARTS. REPLACEMENT COST: 2" WIDE: MAXIMUM PUNCH DIAMETER: 375. $200.00 GOOD CONDITION! MORE HOLE PUNCHING UNITS AVAILABLE HERE OTHER USED HOLE PUNCHING UNITS AVAILABLE: 3654 8B3 UNI PUNCH HOLE PUNCHING UNIT(1) 3734 12BN 1 3/4 STRIPPIT HOLE PUNCHING UNIT(1) 4069 12BN 1 3/4 STRIPPIT HOLE PUNCHING UNITS(2) 4070 8 6J2 STRIPPIT HOLE PUNCHING UNIT(1) 4071 8B 1 3/4 UNI PUNCH HOLE PUNCHING UNIT(1) 4073 8BN 1 3/4 STRIPPIT HOLE PUNCHING UNIT(1) 4074 ... more8BN 2 1/4 UNI PUNCH HOLE PUNCHING UNITS(2) 4075 8A 1 1/2 UNI PUNCH HOLE PUNCHING UNIT(1) 4077 12BN3 STRIPPIT HOLE PUNCHING UNITS(2) 4078 8BN 2 1/4 STRIPPIT HOLE PUNCHES(3) 4079 12BN 1 3/4 STRIPPIT HOLE PUNCHES(1) 4080 8BN 2 1/4 STRIPPIT HOLE PUNCHING UNITS(2) 4081 12BN 1-3/4 STRIPPIT HOLE PUNCHING UNIT(1) FOB OUR WAREHOUSE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-439
|
|
UNI PUNCH 1-1/2" HOLE PUNCHING UNIT- USED UNI PUNCH 1-1/2" HOLE PUNCHING UNIT INVENTORY# 4075 MODEL: 8A 1 1/2 SPECIFICATIONS: 1-1/2 WIDE: MAXIMUM PUNCH DIAMETER: 500" 8 THROAT 10 GAUGE MAXIMUM METAL THICKNESS- MILD STEEL MINIMUM RECOMMENDED DIE CLEARANCE.006 FEATURES: A-2 LONG LASTING STEEL. IDEAL FOR PUNCHING ANGLES, I-BEAMS, EXTRUSIONS AND OTHER FORMED PARTS. NEW REPLACEMENT PRICE. $175.00 GOOD CONDITION- AS PICTURED MORE HOLE PUNCHING UNITS AVAILABLE HERE OTHER USED HOLE PUNCHING UNITS AVAILABLE: 3654 8B3 UNI PUNCH HOLE PUNCHING UNIT(1) 3734 12BN 1 3/4 STRIPPIT HOLE PUNCHING UNIT(1) 4069 12BN 1 3/4 STRIPPIT HOLE PUNCHING UNITS(2) 4070 8 6J2 STRIPPIT HOLE PUNCHING UNIT(1) 4071 8B 1 3/4 UNI PUNCH HOLE PUNCHING UNIT(1) 4073 8BN 1 3/4 STRIPPIT HOLE PUNCHING UNIT(1) 4074 8BN ... more2 1/4 UNI PUNCH HOLE PUNCHING UNITS(2) 4075 8A 1 1/2 UNI PUNCH HOLE PUNCHING UNIT(1) 4077 12BN3 STRIPPIT HOLE PUNCHING UNITS(2) 4078 8BN 2 1/4 STRIPPIT HOLE PUNCHES(3) 4079 12BN 1 3/4 STRIPPIT HOLE PUNCHES(1) 4080 8BN 2 1/4 STRIPPIT HOLE PUNCHING UNITS(2) 4081 12BN 1-3/4 STRIPPIT HOLE PUNCHING UNIT(1) FOB OUR WAREHOUSE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-439
|
|
HTML clipboard SURPLUS ELECTRONICS Greenlee 78-3310-04005 1-3/8" Conduit Size Slug-Buster Die UPC# 04005 Industrial Heavy Duty This is a(NOS) New Old Stock Part New. Never Used! NEW NEW NEW NEW You are bidding on(1) NEW Greenlee Slug Buster Die shown in the photo above Mega Surplus Electronics 3926 Geraldine St. Louis. MO 63115(314) 389-3721 SHIPPING RATE: on this item is $ FREE to anywhere in the lower 48 states of the U.S. I will ship anywhere in the world. Please ask. Before bidding, what the price will be for shipping to anywhere outside of the lower 48 of the U.S. Thank you. RETURN POLICY: I always stand behind ALL my items and will pay for return shipping if any item is not received in the condition stated above. ANY BUYER WISHING TO RETURN AN ITEM MUST CONTACT ME PRIOR TO RETURNING ... moreANY ITEM TO WORK OUT DETAILS. Buyers remorse is not an acceptable reason for a return. My phone number and physical address are listed in every auction. I work hard to make sure each and every transaction is done with the buyers best interest in mind to increase repeat sales. If you are not satisfied with your purchase PLEASE contact me. I am human and occasionally make mistakes. If given the chance I will ALWAYS work to satisfy your expectations. I have a huge 15.000 square foot warehouse FULL of electrical surplus, if your looking for something and I don't have it listed let me know as 1000's of my items are not yet listed on ebay. If you contact me through email or leave a message on my answering machine please include the eBay item number that you are referring to. I work Monday through Friday days so please be patient when contacting me on the weekend or in the evening. Accepted methods of payment are: Paypal. Look at my feedback and bid with confidence! Thanks. Hope we can do business!
|
|
|
knockout set Greenlee 5004011 AND 5004013 1 and 1-1/4" knockout. Posted with
|
|
|
Selling as used because"used' to sit around shop as duplicate. Stand is stamped on bottom"Great Lakes Pressed Steel Corp. Buffalo, N.Y" in a five line oval configuration. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f1a0c1b8b-0x104-
|
|
Greenlee Knock Out Punch for mild steel studs. List price is $345.65*Make Offer* Product Description From the Manufacturer Greenlee's metal stud punch can handle 2-1/2" and wider studs. And can punch through 20 gauge steel studs in one stroke. Product Description 332-710 Features: Aluminum head provides strength with minimum weight. Reducing operator fatigue. Contoured handle design gives better operator leverage and makes it possible to punch in tight places. Self-stripping design eliminates punch hang-ups.Automatically centers holes on standard studs.Price is for 1 Each. Dimensions: Cutting Thickness: 20 gauge. Garner Bender Info: Description Stud Punch. Hole Size(In. 1-11/32, Studding Capacity 1/2 to 1 In. Pipe, Max. Capacity Mild Steel(Ga. 20, Steel Head, Handle Type Steel, Function ... moreSpring Loaded Sleeve, Automatic Stripper, High-Leverage, Punches H Studs Without Damaging Flanges, From Center Of Punch To Back Of Housing Measures 2 In. Punch#43-52, Die#43-95 Studding Capacity: 1/2 to 1" Pipe Head: Steel Max. Capacity Mild Steel(Ga. 20 Item: Stud Punch Hole Size(In. 1-11/32 Handle Type: Steel Function: Spring Loaded Sleeve. Automatic Stripper, High-Leverage, Punches H Studs Without Damaging Flanges, From Center Of Punch To Back Of Housing Measures 2" Punch#43-52, Die#43-95 Check out my! Be sure to add me to your! Put God First and Pray for our troops and their families. All of them.
|
|
MAXIS PUNCH WITH 3/4" 2" KNOCKOUT SET. PREOWED, IN GREAT CONDITION, GREAT SET. L@K FAST SHIPPING(THIS SET IN FANTASTIC. SO EASY TO USE) This kit is designed for use with a cordless drill(not included) It can help you make accurate. Quick knockouts. Advanced knockout tool. With a cordless drill(sold separately) helps you draw punch dies together for quick, accurate knockouts 9 punch die sizes(1/2 in. to 2 in. Can make 2" knockouts in just seconds Virtually no hydraulic ratcheting or mess)BUYER IS RESPONSIBLE FOR READING AND UNDERSTANDING ALL POLICIES( YOU CAN BUY WITH CONFIDENCE. 100% SATISFACTION OR YOUR MONEY BACK. PLEASE FEEL FREE TO ASK ANY QUESTION OR CONCERNS. WE WILL GLADLY ANSWER. PAYMENTS: PayPal PAYMENTS MUST BE MADE WITHIN 4 DAYS AFTER THE PURCHASE. IF PAYMENT IS NOT ... moreMADE AFTER 4 DAYS. WE WILL NOTIFY EBAY FOR NON PAYMENT AND RELIST THE ITEM. SHIPPING: WE ONLY SHIP TO CONFIRMED ADDRESSES. SHIPPING PRICE LISTED IS FOR THE THE 48 US CONTIGUOUS STATES ONLY. PLEASE CONTACT US PRIOR TO PURCHASE IF YOU LIVE OUTSIDE THE CONTINENTAL US( SHIPPING PRICES MAY VARY) SHIPMENTS ARE MADE QUICKLY AFTER ITEM IS PAID. INTERNATIONAL SHIPMENT THE BUYER WILL BE RESPONSIBLE TO PAY ALL THE DUTIES IN THEIR COUNTRIES. FEEDBACK: WE WILL LEAVE POSITIVE FEEDBACK FOR ALL SMOOTH TRANSACTIONS. WE ASK FOR THE SAME IN RETURN. WE DO OUR BEST TO DESCRIBE THE ITEM. OUR GOAL IS TO MAKE YOUR SHOPPING EXPERIENCE A GREAT ONE. WE WILL LEAVE FEEDBACK AS SOON AS FEEDBACK IS LEFT FOR US. RETURNS: IF YOU ARE NOT COMPLETELY SATISFIED WITHIN 14 DAYS AFTER YOU RECEIVE THE ITEM. PLEASE CONTACT US AND RETURN THE ITEM FOR A FULL REFUND, MINUS THE SHIPPING COST. NO QUESTIONS ASKED) NO REFUND UNTIL ITEM IS RETURNED. REMINDER: PLEASE. DO NOT ASSUME ANYTHING. IF IT IS NOT SHOWN IN PICTURES OR WRITTEN IN THE DESCRIPTION, CHANCES ARE IT IS NOT INCLUDED! AGAIN, IF YOU UNSURE OF ANYTHING, PLEASE FEEL FREE TO CONTACT US AT(914) 447- 2238 IF YOU HAVE PURCHASED AND HAVE ANY ISSUES. PLEASE DO NOT FILE A DISPUTE OR LEAVE A NEGAT
|
|
One vintage Greenlee 5/8 inch diameter radio chasis knockout punch. Part# on the one piece is AV1742. It is not marked 730 but from researching I believe these are radio chassis punch. The gentlemans estate it comes from was a radio repairman. The tool looks like it has very light use. Please view pictures closely. Please feel free to ask any questions you may have. I will accept returns and my 100% rating is very important. If you feel the need to leave negative feed back please contact me before hand, so we can discuss it. I'm sure we can come to an agreement. Free shipping items returned will not receive a 100% refund. Refund will be total paid by buyer- minus) actual shipping cost I paid*I describe my items for sale/bid the best that I can. I will never intentionally mis represent ... moreanything I have listed. Combined Shipping is encouraged. Payments are expected at the time of purchase. Feedback is auto generated for you immediately as you leave positive feedback for us.
|
|
|
This is a lightly used Whit ney# 45 hand punch set. It's in good shape. This highly popular hand punch is lightweight and efficient. Durably built and compact, with the power and capacity to meet the majority of sheet metal requirements. Its 1.2 ton punching capacity easily pierces 16 gage mild steel. Use it for round or irregular shaped punching. Punches and dies are easy to change. An adjustable side gage permits accurate throat depth adjustment to be held. Maximum Diameter…9/32 inch(thru 18 gage mild steel) Maximum Thickness… ¼ inch Throat Depth…2 inch Space between Punch& Die 3/16” Overall Length…8½ inches Weight(tool only)2½ lbs Posted with
|
|
Vtg Craftsman 1/4" No 3784 Steel Figures Numbers 1-8 Punch Stamp Tool Wooden Box You may be interested in on eBay. This is for a vintage set of Craftsman No 3784 1/4" steel number punch with a wooden box. They have the numbers 0 1 2 3 4 5 6 7 8. The number 6 can be flipped and used for the 9. The punches have surface rust and wear. The wooden box is stained and worn. This Item is sold as is as pictured! My Policies: NO PARTIAL REFUNDS! YOU HAVE 3 DAYS TO PAY FOR YOUR ITEM. AFTER THAT IT WILL BE RELISTED AND NON PAYING BIDDER REPORTED TO EBAY. ITEMS ARE SHIPPED 3-4 DAYS AFTER PAYMENT CLEARS. NOT INCLUDING WEEKENDS OR HOLIDAYS. TO USE THE SHIPPING CALCULATOR CLICK THE SHIPING& PAYMENT TAB AT TOP OF LISTING* PAYMENT BY: PAYPAL ONLY NO CHECKS. I RETURN FEEDBACK. REFUNDS ONLY IF ITEM ... moreIS MISREPRESENTED. I USE CONFIRMED SHIPPING INFO FROM PAYPAL& EBAY'S SITE. NO SHIPPING TO ITALY. INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ALL IMPORT TAXES. ITEMS ARE NOT MARKED AS GIFTS AND ACUTAL VALUE OF ITEM IS STATED IN CUSTOMS FORMS. I ONLY ANSWER EMAILS THROUGH EBAY PA RESIDENTS MUST PAY 6% SALES TAX Powered by
|
|
wi_finders USED IN PERFECT WORKING CONDITION. Some light surface rust. GREENLEE Kit Includes: 1/2" conduit size punch 1/2" conduit size die 3/8" x 1-9/16" BALL BEARING draw stud 3/4" conduit size punch 3/4" conduit size die 1" conduit size punch 1" conduit size die 1-1/4" conduit size punch 1-1/4" conduit size die 3/4" x 2-1/8" BALL BEARING draw stud SUPPORT ADDRESS: R. Smith Engineering Company 3315 South Clement Ave. Milwaukee WI 53207 SHIPPING TO USA LOWER 48 STATES ONLY. Contact us before bidding about shipping outside of the US. We ship EVERYDAY when possible. Payment Within 5 Days Of Auction Close. Contact BEFORE Leaving Neutral Or Negative Feedback. Designated trademarks and brands are the property of their respective owners. ... moreSellers are not responsible for service transit time. Transit times are provided by the carrier. Exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.
|
|
SELLING ALL FOUR GREENLEE ITEMS TOGETHER- LARGE HYDROLIC DRAW BOLT LARGE HYDROLIC DRAW BOLT SLEEVE FOR LARGE KNOCK-OUTS SMALL HYDROLIC DRAW BOLT FOR SMALL KNOCK-OUTS HYDROLIC KNOCK-OUT SPACER*THE KNOCKOUT CUTTER IN THE PICTURE IS NOT INCLUDED ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Payment Restriction: We accept only Paypal payments. Payment is required at time of purchase to complete the transaction. Delivery Time: Please allow 3-5 BUSINESS days for handling time from date of purchase. We do not ship on weekends. Combine Shipping: If you would like to purchase multiple units of a single item. Contact us for a shipping discount before making ... morepayment. We do combine shipping upon request on different items won in 48 Hr. period also. Contact us for this rate before making payment. Additional Shipping Charges: Listed shipping rate applies to delivery within the Continental United States only. Shipping to Alaska. Hawaii, APO, FPO, Guam, Virgin Islands and Puerto Rico require additional Shipping charges, please contact us for these rates prior to purchase. We do not ship International. Communication and Feedback: Communication and Customer Service is our goal! We will communicate with you and tell you when your product ships. Our positive FEEDBACK is automatically sent upon receiving your positive feedback. If you are not completely satisfied. Contact us and we will work with you. Return Policy: Your satisfaction is important to us! We accept returns for replacement or refund. REFUND: If you are not satisfied with your purchase and wish to return for a refund. Please notify us within 14 days of receiving the item(s) in its original condition. Refunds will be for the original price paid, less shipping and handling. All refunds will be made to your Paypal account only; we will not mail the refund.
|
|
GOOD STUD PUNCH. WORKS FINE. ACTUAL PUNCH DIAMETER IS 1.356" 012- PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND ... moreOUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE*
|
|
|
greenleensquaredrock Store Greenlee 7804SB Hydraulic Punch Driver Set in good working condition. All punches complete. Looks like most sizes were not even used. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1428 Posted with
|
|
|
Being offered is a used Greenlee#60246 Slug Buster round punch set in excellent condition. It is 1-7/32” 30.5mm) diameter in size and will cut thru material up to 10-gauge. It comes in its original packaging with the original instruction sheet. Please see the photos for more detail. Note that I have additional round punch sets of various sizes in other listings. Priority Mail Flat-rate shipping of $4.99 will be to the lower 48 states only and I do combine shipping whenever possible. Just wait for a corrected invoice. Payment by PayPal is expected within 48 hours of winning. Please ask if any questions and thanks for looking! Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Being offered is a Greenlee Tool Co. 730 round radio chassis punch. It is 1/2” 12.7mm) diameter in size and will cut thru material up to 16-gauge. It comes in its original box with the original instruction sheet. I’ve listed this as Used although I don’t believe it actually has been. Please see the photos for more detail. I also have other additional punches in various sizes available in other listings. Priority Mail Flat-rate shipping of $3.99 will be to the lower 48 states only and I do combine shipping whenever possible. Just wait for a corrected invoice. Payment by PayPal is expected within 48 hours of winning. Please ask if any questions and thanks for looking!
|
|
|
Greenlee 5006978. 5004061, 1-1/2" Conduit Knockout Punch#B Posted with
|
|
|
Greenlee 1" Knockout Punch 5004011 5004040 5004010 Posted with
|
|
|
Up for bids are the two chassis punches you see in the picture. The one inch size is marked PIBCO. The 1 1/4" is marked 16A. No. 729, MADE IN USA. THANK YOU FOR LOOKING.
|
|
|
Only used this a few times. Last I was aware. It was in perfect working order. Includes two bags of plastic grommets.
|
|
|
Up for sale is a greenlee 1732-m hydraulic c frame punch in the case with the dies shown. This tool is in great working condition and comes as shown.
|
|
|
P&W 2-1/2" Square x 3/4" x 1" NPT I-6 Die Tap Tapping Tool made in USA
|
|
|
Used only twice. Motor/drill has 5 year warranty from Milwaukee. Comes with everything shown, no missing parts. Posted with
|
|
GREENLEE 735/735BB KNOCKOUT PUNCH SETS Greenlee ball bearing knockout punch sets model 735/735BB. Previously used. Shows cosmetic wear but is fully operational and functions as intended. Complete sets for 1/2" 3/4" 1" and 1-1/4" conduit size holes. Comes with the original green case but show signs of cosmetic wear. Shipping is FREE within the lower 48 states. Please allow 24 hours handling time. Shipping is done(Monday through Friday) Please read terms and conditions carefully. Please ask any questions prior to bidding. This is important and will save problems later. Payment: Payments are expected within 4 days after the listing ended. Payment accepted through PayPal with a confirmed address. If you have not submitted payment within 4 days. An unpaid item case will be opened. ... moreNo exceptions! All items will be ship 1 or 2 days after payment has been confirmed through PayPal. A tracking number will be sent to your account on eBay and PayPal. I don’t ship on Weekends or Federal holidays. Monday through Friday only. Condition: All item(s) are described as accurately as possible to the best of my ability. The(3 to 12) Photos are an important part of my item description. All items are sold“as is” All sales are final with no warranty or implied, unless otherwise stated. Pre-owned items means“ USED” expect some signs of wear. If not stated in“ NEW” condition. Returns: will be accepted only if the item is wrongfully described. All items must be return within 14 days. Contact seller within 3 days before initiating a return. All items must be in its original condition and packaging. Shipping and handling is non-refundable. If your item was offered free shipping. The cost of the original shipment will be deducted from the refund of the purchase price. I do not ship outside the United States or to APO/ FPO/ P.O. BOX Addresses. I will leave feedback only after I know our customer is satisfied. By bidding on this auction. I will assume that the buyer had accepted the terms and conditions. Please feel free to
|
|
|
Greenlee Rectangle Punch and Die Set. Part#s 60072 and 60071. 2.250" x 3.500" or 57.2mm x 88.9mm. Punch is in great shape. Not showing any knicks or cracks, it's ready to go to work for you. Designed to be used with a hydraulic punch driver, you would need a draw stud( unless you have one already. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1581 Posted with
|
|
Greenlee 7706SB Specifications: 721-1/2 1/2" Conduit Size Punch. Hole Size: 7/8" 14722 1/2" Conduit Size Die. Hole Size: 7/8" 721-3/4 3/4" Conduit Size Punch. Hole Size: 1.115" 124AV 3/4" Conduit Size Die. Hole Size: 1.115" 721-1 1" Conduit Size Punch. Hole Size: 1.362" 126AV 1" Conduit Size Die. Hole Size: 1.362" 721-1-1/4 1-1/4" Conduit Size Punch. Hole Size: 1.701" 128AV 1-1/4" Conduit Size Die. Hole Size: 1.701" 721-1-1/2 1-1/2" Conduit Size Punch. Hole Size: 1.951" 440AV 1-1/2" Conduit Size Die. Hole Size: 1.951" 721-2 2" Conduit Size Punch. Hole Size: 2-3/8" 442AV 2" Conduit Size Die. Hole Size: 2-3/8• 10383 Quick Draw Flex Driver• 1614SS Draw Stud- 3/8" x 2-13/16" ... more31872 Draw Stud- 3/4" x 4-1/8" 1924AA Spacer-Short• 33967 Stud Adapter- 3/8" 10391 Plastic Case Greenlee 7706SB Features: Compact. Lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching. Even in 10-gauge stainless steel, depending on individual punch capacities. Quick Draw is perfect for fast. Straight-on front panel punching. Quick Draw Flex allows unlimited driver orientation to simplify access to work area. YOU CAN BUY WITH CONFIDENCE. 100% SATISFACTION OR YOUR MONEY BACK. PLEASE FEEL FREE TO ASK ANY QUESTIONS OR CONCERNS. WE GLADLY ANSWER. IF YOU PURCHASED AN ITEM AND HAVE ANY ISSUES, PLEASE DO NOT FILE A DISPUTE OR LEAVE NEGATIVE FEEDBACK BEFORE CONTACTING US FIRST. I GUARANTEE A RESPONSE TO YOUR EMAIL OR PHONE CALL WE WILL RESOLVE ANY ISSUES YOU MAY HAVE. PLEASE CALL 914 447 2238. PLEASE VISIT OUR STORE AT WWW.HILTIMASTER,COM)BUYER IS RESPONSIBLE FOR READING AND UNDERSTANDING ALL POLICIES. PLEASE) INTERNATIONAL BUYER. PLEASE BEFORE BUY. EMAIL US TO CHECK HOW MUCH IS SHIPPING FIRST, WE GET THE BEST PRICE OF SHIPPING TO ANY COUNTRY. THANKS. CHECK OUT MY FEEDBACK AND BID WITH CONFIDENCE! PLEASE CLICK TO SEE MY OTHER AUCTIONS AND ADDITION
|
|
|
Only one slug cutter used(1/2" and others are NIB. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13fe4c2e88b-0xea-
|
|
CURRENT TOOLS 161SS STAINLESS STEEL 1/2" TO 2" KNOCKOUT PUNCH SET 1 GREENLEE DIE Up for sale is a used but in great working condition Current Tools 161SS Stainless Steel Knockout Punch Set 1/2" to 2" These are pictures of the actual item up for sale. It has been tested and is fully functional. Comes with case. 1/2" to 2" punch and dies, spacers and all draw studs shown. All the punches are very sharp with lots of life left in them. The 3/4" punch is greeenlee. The hydrauilic pump and ram work perfectly with no leaks.Free shipping to anywhere in the lower 48 states only. Alaska and Hawaii please email me for shipping cost. I will only ship to a Paypal confirmed address. Please review me feedback and bid with confidence I will only ship to a confirmed address. ... moreI accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much for looking please click below to view my other qaulity tools. A confirmed address is your credit card billing address.NO local pickup available. There is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Add me to your Favorite Sellers View My Other Items For Sale Please Read Carefully We do not pay for parts of repairs. If you have a problem with an item please contact us. You have a 3 day inspection period if not happy simply send back for a full refund.
|
|
GREENLEE 730 1 5/8" 41.2mm THIS IS A BRAND NEW 730 41.2MM 1 5/8 RADIO CHASSIS PUNCH. IT IN GREAT CONDITION, IT LOOKS NEW, IN ORIGINAL VINTAGE GREENLEE BOX! YOU CAN BUY WITH CONFIDENCE. 100% SATISFACTION OR YOUR MONEY BACK. PLEASE FEEL FREE TO ASK ANY QUESTIONS OR CONCERNS. WE GLADLY ANSWER. IF YOU PURCHASED AN ITEM AND HAVE ANY ISSUES, PLEASE DO NOT FILE A DISPUTE OR LEAVE NEGATIVE FEEDBACK BEFORE CONTACTING US FIRST. I GUARANTEE A RESPONSE TO YOUR EMAIL OR PHONE CALL WE WILL RESOLVE ANY ISSUES YOU MAY HAVE. PLEASE CALL 914 447 2238. PLEASE VISIT OUR STORE AT WWW.HILTIMASTER,COM)BUYER IS RESPONSIBLE FOR READING AND UNDERSTANDING ALL POLICIES. PLEASE) INTERNATIONAL BUYER. PLEASE BEFORE BUY. EMAIL US TO CHECK HOW MUCH IS SHIPPING FIRST, WE GET THE BEST PRICE OF SHIPPING TO ANY COUNTRY. ... moreTHANKS. CHECK OUT MY FEEDBACK AND BID WITH CONFIDENCE! PLEASE CLICK TO SEE MY OTHER AUCTIONS AND ADDITIONAL ITEMS IN MY EBAY STORE. INTERNATIONAL BUYERS? WE DO NOT SHIP TO SOUTH AMERICA(BRAZIL. PERU, VENEZUELA, ETC. IMPORT DUTIES. TAXES AND CHARGERS ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGERS. THESE CHARGERS ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING/BUYING. WE DO NOT MARK MERCHANDISE VALUES BELOW VALUE. US AND INTERNATIONAL GOVERNMENT REGULATIONS PROHIBIT SUCH BEHAVIOR.
|
|
GREENLEE RADIO CHASSIS PUNCH 730 1 5/32 THIS IS A BRAND NEW GREENLEE RADIO CHASSIS PUNCH 730 1 5/32. IT IS IN PERFECT CONDITION, COMES WITH ITS ORIGINAL GREENLEE BOX AND INSTRUCTION! YOU CAN BUY WITH CONFIDENCE. 100% SATISFACTION OR YOUR MONEY BACK. PLEASE FEEL FREE TO ASK ANY QUESTIONS OR CONCERNS. WE GLADLY ANSWER. IF YOU PURCHASED AN ITEM AND HAVE ANY ISSUES, PLEASE DO NOT FILE A DISPUTE OR LEAVE NEGATIVE FEEDBACK BEFORE CONTACTING US FIRST. I GUARANTEE A RESPONSE TO YOUR EMAIL OR PHONE CALL WE WILL RESOLVE ANY ISSUES YOU MAY HAVE. PLEASE CALL 914 447 2238. PLEASE VISIT OUR STORE AT WWW.HILTIMASTER,COM)BUYER IS RESPONSIBLE FOR READING AND UNDERSTANDING ALL POLICIES. PLEASE) INTERNATIONAL BUYER. PLEASE BEFORE BUY. EMAIL US TO CHECK HOW MUCH IS SHIPPING FIRST, WE GET THE BEST PRICE OF SHIPPING ... moreTO ANY COUNTRY. THANKS. CHECK OUT MY FEEDBACK AND BID WITH CONFIDENCE! PLEASE CLICK TO SEE MY OTHER AUCTIONS AND ADDITIONAL ITEMS IN MY EBAY STORE. INTERNATIONAL BUYERS? WE DO NOT SHIP TO SOUTH AMERICA(BRAZIL. PERU, VENEZUELA, ETC. IMPORT DUTIES. TAXES AND CHARGERS ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGERS. THESE CHARGERS ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING/BUYING. WE DO NOT MARK MERCHANDISE VALUES BELOW VALUE. US AND INTERNATIONAL GOVERNMENT REGULATIONS PROHIBIT SUCH BEHAVIOR.
|
|
|
GREENLEE 3/4" CONDUIT KNOCK OUT# 500-6972. GOOD SHAPE I ACCEPT MOST FORMS OF PAYMENT WILL COMBINE SHIPPING LOCAL PICK UP IS WELCOME
|
|
|
Up for sale is a clean. Rebuilt, and complete Greenlee#7306 hydraulic knock out punch set. If you need to punch up to 4" or even 5" check out my other items for sale. I have them for sale as well. Both the pump and ram have been re-built. Painted, etc. the pressure hose is new, the large draw stud and one of the smaller studs are new, the dies and cups are clean or new. Check the pictures, it draws in as it should with ease. This one was a keeper but I found a newer set in my tool room so I am letting this go. Other than the tool inventory number. It looks like a new punch! I am selling off all of my tools specific to the electrical trade. If you need something specific. Drop me a note. I may just have one ore two. Any questions. Please ask Posted with
|
|
You are considering a Greenlee Model 710 Metal Stud Punch. This punch is used and in fair overall condition. The body and handles have mild to moderate scratches and wear from use and handling. We tested the punch on a piece of 24 Ga mild steel and it punches fine with minimal burr. We currently have 5 of these punches available. All of them have been tested and are in the same overall condition. Mfg By: Greenlee Model: 710 Description: Metal Stud Punch Hole Dia: 1-11/32" for 1" conduit) Capacity: 20 GA Mild Steel SHIPPING: Buyer to pay actual shipping cost from Muscle Shoals. AL 35661. Or, you are more than welcome to pick the items up here. We will be happy to combine shipping on multiple items. Please contact us for combined shipping quotes. PAYMENT: Paypal If you have any other ... morequestions please feel free to contact us. You may do so by using the"ask seller a question" form on this listing. Or. Call us at(256) 386-9808, Monday- Friday, 8:00 to 4:30, CST. Thanks for looking and Happy Bidding. Be sure to Check out our other items for more new and used surplus items.
|
|
|
Greenlee Knockout Punch Set 36279 5036282 1-7/320*FREE SHIPPING* Payment required within seven(7) days after end of auction. I DON'T SHIP ON WEEKENDS* Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee 1" Conduit Knockout Punch Set 5004010 5004011*FREE SHIPPING* Payment required within seven(7) days after end of auction. I DON'T SHIP ON WEEKENDS* Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This is a used item. I have used this item myself and it works great.
|
|
|
GREENLEE CONDUIT CUTTER WITH DRAW STUD BOLT(1 1/2) 1 1/4) 1) 3/4) CONDITION: Normal wear and tear– see pictures Good Working Condition Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Will Combine Shipping– Request Invoice Please e-mail with questions
|
|
|
Offered here is a 1 7/8" hole diameter Greenlee Knockout Set. Set consists of punch and die. The punch can be used with the proper draw stud(not included) or it can be used with a hydraulic punch. Item is used but in great shape- see photos. Winner pays only 7.00 S&H. Good Luck!
|
|
|
GREENLEE KNOCKOUT PUNCH SET 7238SB 1/2 INCH THRU 2 INCH IN CASE. EXCELLENT CONDITION LIGHTLY USED CAN TEST PICS TO ANY CELL ALSO WILL ANSWER ANY QUESTIONS. THANKS.
|
|
|
1 1/4" SQUARE STUD PUNCH VERY NICE CONDITION USED BUT NOT ABUSED MADE BY ELEC=TOOLS PUNCH OUT 1 1/4" SQUARE HOLES UP TO 20 GAUGE STEEL THANKS FOR LOOKING f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-140022bc422-0x102-
|
|
|
Complete 1" knockout set. Hardly ever used. Excellent shape. SHARP. Please view all pics& ask any questions prior to bidding. PayPal only& payment is due in 2 days. Unpaid item case automatically opens on day 3. Check my other listings for 1-1/4" 3/4" Greenlee knockouts. Will make package deal on all 3 sets.just make an offer!
|
|
|
These conduit punches are like new. I seldom used them.
|
|
|
You are bidding on 3 Greenlee knockout hole punch dies and 1 knockout draw stud w ball bearing piece. Item are label as follows. 1-1/4 conduit. 5006974_ 1-1/4 conduit 43, 2mm, 5004013_ 1-1/4 conduit AV127_ 1-1/4 conduit 500-4013_ 1-1/2 conduit(1.951) 49, 6mm, 5031760-1_ 1-1/2 conduit 49.6mm, 5004061_ Items are used and sold as is! Flat $6 shipping and handling. Will process1-3 business days after payment is received. 14 day return policy, buyer paysreturn shipping, item will be returned. Thanks for looking and good luck!
|
|
|
HELLO AGAIN! I APPRECIATE YOUR TIME AND INTEREST. LETS TAKE A CLOSER LOOK AT WHAT'S UP FOR AUCTION: 1) GREENLEE PORTA THRED- CATALOG NO. 440 CONDITION: THIS IS IN AVERAGE USED WORKING CONDITION- SATISFACTION GUARANTEED! I WILL SHIP THIS USPS PARCEL POST FOR $20.00 ANYWHERE IN THE CONTINENTAL(48) UNITED STATES. ALASKA. HAWAII, AND PUERTO RICO WINNERS WILL BE CONTACTED TO DISCUSS YOUR SHIPPING PREFERENCES. BID WITH CONFIDENCE YOUR SATISFACTION IS GUARANTEED- PLEASE RETURN WITHIN FOURTEEN DAYS OF RECEIVING FOR A REFUND. YOU WILL BE RESPONSIBLE FOR RETURN SHIPPING COST. PLEASE ASK IF YOU HAVE ANY QUESTIONS- I APPRECIATE YOUR TIME AND INTEREST. PLEASE CHECK OUT MY OTHER AUCTIONS AT other items! BIDNOWBIDNOWBIDNOWBIDNOWBIDNOW!
|
|
|
GREENLEE# 730 5/8" ROUND RADIO CHASSIS HOLE PUNCH Punch is in GOOD working condition Has no CHIPS and is SHARP Box and Instructions included SHIP TO US 48 ONLY!
|
|
|
UP FOR AUCTION IS A GREENLEE 5" CONDUIT PUNCH AND DIE WITH DRAW STUD AND ADAPTER. IT IS USED AND IT IS IN GOOG WORKING CONDITION. LOOK AT PICTURES.
|
|
|
YOU ARE BIDDING ON A GREENLEE KIT 767A HYDRAULIC HAND PUMP AND 746 RAM OWNER STATES THAT ITEM IS IN GOOD WORKING CONDITION I DO NOT KNOW HOW TO TEST IT BUT JUST SOLD SIMILAR KIT FROM SAME OWNER AND CUSTOMER IS HAPPY WITH IT INCLUDES EVERYTHING SEEN IN PICTURES PLEASE CLICK ON see other items FOR MORE GREAT TREASURES. THANKS FOR LOOKING AND HAPPY BIDDING
|
|
|
THIS IS A NEAR NEW 7310-GREENLEE HYDRAULIC KNOCKOUT SET.VERY NICE,LOOKS LIKE NEVER USED TO ME,GOES 1/2" THRU 4" WISH ALL ASS. SEEN IN PICTURE.BUYER PAYS 44.99 S/H,INSURNANCE INCLUDED-FREE S/H WITH BUY IT NOW OPTION
|
|
Hello bidders and welcome. Today you will be bidding on a Klein Tools 53732-SEN Knockout Punch Set with Wrench- Looks New. Posted below are some features I found on a website. If you have any questions please feel free to contact us using the information at the bottom of this page. Thank you and Happy bidding. FEATURES: Set includes 1" ratcheting wrench. Knockout punches, dies and draw studs for 1/2" 3/4" 1" 1-1/4" 1-1/2" and 2" conduit sizes• Cutting capacity 10 gauge mild steel; also cuts aluminum. Fiberglass and plastic• Splits slugs for easy removal• Punches holes cleanly and accurately• Kit includes six different size knockout punches and dies. Two draw studs and ratcheting box end wrench. EVERY ITEM YOU SEE POSTED IN THE PICTURES IS INCLUDED IN THE ... morePURCHASE* We are a pawn shop and every item we list came out of our store. As such it is used and we list it that way. We offer 7 day cash back where the buyer pays return shipping. We ship via FedEx Ground on Tuesdays and Thursdays. All items will leave our shop by 6pm on those days after payment has been processed. When we calculate shipping. We take into account the weight of the item packaged. Our items are also covered by FedEx. If any damages occur in the shipping process, FedEx will be liable and we will work to resolve any shipping problems. We only accept U.S. buyers and we only ship to the greater 48 states. No exceptions. We do offer local pick up. If you want to pick the item(s) up from our store. Please send us a message immediately after you win the item, letting us know that you want to pick up the item(s) We will not charge you for shipping if you choose to do local pick up. Our store hours are 9am to 6pm Monday through Friday. If you have any questions feel free to email us at our e-bay account or you can call us at 337-436-0892. Thank you and Happy Bidding. H) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-140320e2e9b-0xfb-
|
|
|
Green Lee 7238sb 1/2" thru 2" Conduit Knockout Punch Set There Is Some Wear As Shown In Photos Overall Punch Set Is In Good Working Condition_ Selling As Is No Returns Any Questions Feel Free To Ask Ships Only To US and Canada No Reserve
|
|
|
Used. Very little, in very good working condition viz actual photo.
|
|
|
Retiring and this HYDRALIC punch kit is for sale. 1/2 to 2inch conduit punch kit, also included is the punch for Allen Bradley push buttons. The unit is used but work great and all the dies are sharp and ready to use. There are two draw studs in the kit(7) dies and the carrying case. GOOD LUCK. NOTE shipping charges will only be dollar for dollar any excess will be returned.
|
|
|
This is a solid set that still moves smoothly. No fractures or busted threads. Posted with
|
|
We have a Old Greenlee Knockout Punch Set up for Grabs! One of the Punches May Have Been Resharpened"The Smallest One" and One of the Ball Bearings is Attatched to the Bolt While the Other Is Not.Both Seem to Spin Ok! The Tools Show Signs of Age and Use Including"Rusting. Discoloration, Grime Ect- Please See Pics and Determine the Condition of them for yourself Before Bidding as Peoples Description of Wear Varies" Great Greenlee Set for a Great Price. Dont Let This One Pass you By! I Have Alot of Assorted Vintage and Modern Merchandise that I will be Offering up for Auction.Most Items come from Bulk Merchandise Purchases.All Will Be Auctioned With NO RESERVE! As Always Bid With Confidence and Please Profile Before Bidding!If For Any Reason you Are Not Satisfied with the ... moreMerchandise I Am Here to Help Resolve any Issues there May Be! All Of My Auctions are Calculated Based on Weight and the Rates of USPS. Please Factor your Bid Around the Shipping Cost you Decide to Choose! I Offer Competitive Prices on Everything I Sell.If You Win Multiple Items off of My Site I Will Combine The Shipping and the Charge will Be based on Package Weight and USPS Rates"This Includes Penny Items"Please Contact Me in the Event you win Multiple Items So i can Send you a Updated Invoice Reflecting the Combined Shipping Discounts! If You See More Items ending on Another Week and would Like to Combine Shipping on them. Just Message Me and Inform Me that you are Not Done Shopping until you Buy Them.Pay Only after you are Done Shopping as I Have a 1 Day Handling Fee and Cannot Push Off Shipping Once Paid without Harming my Account!As Long as I Am Informed you are Not Done Shopping there will Not Be a Unpaid Bidder Notification Sent But Once the Items are Paid I Must Ship them within a Day* Thank You for Visiting My Ebay Page! Please Click the Attached Link to to As you Never Know What you Will Find that Will Spark your Interest! INTERNATIONAL BIDDERS* Please Note that You Are Responsible for Knowin
|
|
|
Up for sale is a n 8 piece Cummins brass punch set#5183. It seems to be in good condition but please look at pictures and judge condition for yourself. They come in a really nice wooden box and would make a nice gift. They are sold as is and returns are not accepted. Payment is due within 3 days of auctions end. No international shipping at this time. Please ask if you have questions. Thanks for looking and good luck if bidding!
|
|
|
Used- Excellent Condition- Greenlee 4" Conduit Knockout Punch- Actual 4-1/2" Hole(Actually it may be new) Punch#5004655 Die 35004654 3216 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
We have for auction this Used No.730 Greenlee 1 1/4 inch Knockout Radio Chassis Punch. Appears to be in very good condition. I will be listing quite a few more Greenlee Knockout Punches so please check out my other listings.
|
|
100% of your bid contributes to the many quality programs Aspire provides to more than 1.000 adults and children with developmental disabilities Up for auction. We are offering a hand punch kit from Roger Whitney. Made in the U.S.A. This No. 5 Junior Hand Punch comes with seven(7) round punches and dies. All materials are stored in a red plastic case(9-1/2 inches by 5-inches by 1-7/8 inches thick) and come in the original manufacturer’s box. The tool displays the handwritten name of a previous owner(written in marker) otherwise. It appears to remain in excellent condition. The box shows some slight disrepair. But is intact. To ensure buyer satisfaction. We encourage questions regarding the products we offer. However. Once bidding has concluded, we must regard all sales as final. Buyer pays ... moreactual shipping. Only, ever! We accept PayPal for payment. Due within seven days of auction end. When auctions close in the evening. Invoicing will occur during normal business hours of the next business day. We notify buyers of expected delivery date. Whenever possible. We use recycled materials when packing your purchase. We appreciate your support of Aspire! jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1404c3ab489-0xf2-
|
|
|
Hello, up for auction 1 greenlee punch for1 inch conduit. good used tool. Threads are very nice. may ship for free if you win another auction if I can fit it in flat rate lot? so check out my other tool lot for electrical tools and many hand tools and tool boxes. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-1404c3ab482-0x101-
|
|
9 GREENLEE Conduit Knockout Punches Dies Bolts Cutters 1 1/8– 5/8 Up for auction today is a group of 9 conduit knockouts. 7 are GREENLEE sizes 1 1/8. 1 1/16, 1” 7/8, 7/8, 3/4 and 5/8 dia. 4 of the 7 have the previous shop name inscribed on them. 1 is a Pioneer 1 11/64” 1 has no bolt is marked PIBCO 1 11/64. They all seem to be in good working condition and could use a cleaning. Please see photos to determine condition and ask questions as needed. Winning bidder agrees to pay $ 7.30 priority for shipping and handling which includes delivery confirmation but not insurance. NEVER A RESERVE Please read information below before bidding. I thank you for viewing my item and good luck with your bid. My aim is to always fairly represent the item’s condition and what the item is. I will do this by providing ... morea description and pictures to the best of my ability. The pictures are an important part of the description so please look carefully. If you have information about this item in contrary to what I stated please let me know and I will correct it. If I have one. I will state the history of the item as conveyed to me. Since all the items I sell were purchased used and may have had many owners, I will never know all the history as far as the environment they were kept in. The items I sell are vintage or older and normal wear is to be expected. And will often enhance its beauty and value. Communication and understanding is essential to ensure a mutually satisfying transaction. So please e-mail me for any clarification of description needed or more photos. All items are sold as is with no returns. Please be certain of what you are bidding on before you bid. Please look at my feedback and know you can bid with confidence. Payment is expected with PayPal within 5 days of auction close. If payment is not received within this period. You will forfeit the item to the backup bidder unless we make other arrangements. All items will be shipped within 3 business days of receipt of payment. Unless other arrangements are made(I some
|
|
Greenlee Knockout Punch Set 1.5" 2" Conduit Tool w/ Leather Case + Extra 2" Vintage set of Greenlee conduit knockout punch set with original leather case. Includes 2" and 1.5" set. Also included is another Greenlee 2" punch set with no case. The extra 2" set is marked 2- Conduit 50.8 mm/5004063 and 2-conduit 5004062 We also have Greenlee 735 knockout punch set offered this week. Check it out. Made in Rockford. IL USA Payment for regular auctions is due within 48 hours of auction end time. Buy-it-now auctions require immediate payment. Insurance is always automatically calculated into the shipping price. Most items ship within 24 hours of receiving payment Thank you for viewing our auction! All our auction items are generously donated. Although condition will ... morebe described as accurately as possible; prior history is unknown. Therefore. Questions are encouraged, and will be answered promptly. Auction proceeds help provide better housing for citizens of Highlands County. Florida
|
|
|
You are bidding on a Greenlee Ratchet Knockout Punch Set for 1/2" Thru 5/8" Conduit. It is used. But everything is included and functional. Thanks for looking!
|
|
|
Greenlee 7238SB slugbuster 1/2"2" knock out punch set is complete and in good working order. The threads on the smaller threaded shaft are stripped but are high enough that it doesnt effect punching. The tool shows normal wear from use. I ship promptly. Good luck
|
|
|
Greenlee oil tight switch punch Model# 5060249(newer model number 60242) Grainger item number 4JA63 Knockout Punch. Oil Tight, Punch Size 1.210 x 0.190 x 1.380 In, Hole Size 1.210 x 0.190 x 1.380 In, Maximum Capacity Mild Steel 10 GA, Centering Marks For Hole Alignment, For Installation of Switches or Instruments, Use with Manual Wrench or Hydraulic Driver Used. Very good condition(sharp cutting edges) Buyer pays shipping Accept Paypal or MO
|
|
|
For sale is a used set of Knockouts. Sized from 1/2"2" with ratchet and hard case. Set has been used maybe 4-5 times so its fairly new. I will upload pics of actual set asap. Although its identical to set in pic. Questions? don't hesitate to ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14051fb7ac1-0xfa-
|
|
|
this conduct show ware some lite scratches some staining and lite rust.
|
|
This auction is for a Greenlee 7906SB Quick Draw 90 hydraulic punch driver in very good used condition. All the dies are sharp and in excellent condition with no chips or damage of any kind. An extra long draw bar is also included. Email me with any questions about this item or about shipping before bidding or for an international shipping quote. I don’t mark up shipping costs like some sellers do trying to make extra money but I do add enough to cover the packaging supply’s it takes to make sure your item gets to you without damage. The total shipping costs may vary from the Ebay shipping calculator depending on how much the item sells for and the cost to insure it. I normally ship with USPS the same or next business day of receiving payment. I can also ship with UPS and FedEx when needed. ... moreI also do combine items when possible to save you on shipping costs. If you do win more than 1 listing email me requesting a combined shipping total. Your item will be carefully packaged. Insured, tracked and shipped with USPS. Check out my other listing. PAYMENT: Payment for items is to be paid within 2 days of winning the auction and the Ebay Policy for items not paid within 4 days an automatic unpaid item case will be opened by ebay. Remember that you commit to pay when you buy or bid successfully on an item and with nonpaying bidders eBay will record an unpaid item on your account repeated unpaid items can result in your account being restricted or suspended. SHIPPING: Recently shipping costs with USPS has gone up so please don’t hold this against me when leaving feedback. I try to ship every item as fast as possible and will combine your items when possible and insure all items and provide tracking. USED PARTS: The used parts I sell will fit what they are listed to fit and possibly other years or models but I am not a shop with an interchange book that can tell you what parts will interchange with or if there compatible with what you might have so It’s up to you to research that information on the net or a dealer to be s
|
|
|
We have for auction this Used No.731 Greenlee 1 inch Square Knockout Radio Chassis Punch. Appears to be in very good condition. I will be listing quite a few more Greenlee Knockout Punches so please check out my other listings. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14055db7435-0x107-
|
|
This auction is for over 280 miscellaneous USED Steel Rule Die Seamless Punches. The height on all but four is.937” Those four are.918” Some of the many are Self Cleaning. Spring Extraction and Various sizes and shapes. These are used but still sharp enough to cut cardboard. Many are over 40 years old. Some have surface rust on them due to being stored in a basement. Shipping is determined by weight and your location. I try to describe(see pictures) each item as best as I can so if you have any questions. Please ask before bidding because items are sold as is with no returns unless my description and answers to your questions are misleading or incorrect. I do combine multiple orders at the lowest possible rate. Thanks for looking at my auction. Rates apply only to domestic sales. If international ... moreplease email me an address so I may quote you a shipping price. NOTE: I will leave feedback after you have left feedback. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-14058e33de1-0x104-
|
|
|
25 pin DIE punch replacement Used still in great working condition
|
|
GREENLEE 7506 SLUG SPLITTER Hydraulic Knockout Set for Stainless Steel 1/2" through 2" conduit sizes Set is complete and in excellent condition with no problems whatsoever. No leaks. Chipped or dull punches. Includes hydraulic hand pump. Hose, ram, 1/2 through 2" Slug Splitter punches and dies. Draw studs(2) spacers(3) and steel carry case. Slug-Splitter SC(self centering) knockout punches with capacities up through 10 gauge(3.5 mm) stainless steel. Self-centering punch aligns itself on pilot hole. No need to draw crosshairs or line up die alignment marks. Fast. Easy and simple to operate. Compact design makes this a perfect choice for use on construction sites and maintenance jobs. Will also drive 751 Cable Cutter head(available separately) Powerful 11-ton hydraulic ram. 3-foot ... morehose. Hydraulic ram and hand pump 90-day warranty on hydraulics Weighs 32-lbs. We have a wide variety of other new and used Greenlee. Klein and Maxis KO punch sets: hydraulic, drill-driven, self-contained hydraulic. Individual punches& dies and draw studs from 1/2" to 4" in stock now Fast FedEx Shipping WITHIN THE 48 LOWER UNITED STATES ONLY. NO P.O. boxes please. Adult signature required upon delivery. 100% satisfaction guaranteed or your payment cheerfully refunded upon return of item We're proud of our positive feedback rating We strive to do it right the first time. Every time We ship FAST! Usually the same day of your cleared payment Questions? We are here to help you. Call. Message, text or come visit our full-serice professional tool store: Roberts PRO Tools LLC 5959 E Southern Av. Suite 106 Mesa. AZ 85206(480) 600-6921 Our eBay department is open 7 days a week 8am to 7pm MST Top-Quality Brand Name New and Used Tools for the PRO
|
|
|
Greenlee Part#60050 rectangular punch. 1.2 x 1.3
|
|
|
Punch is in excellent shape. Only used a couple of times. Punch# is: Greenlee F3OBB-2 1\4 Round 25260 Retail 175.00.
|
|
|
GREENLEE#731 7/8" SQUARE HOLE PUNCH PUNCH in GREAT Condition. NO CHIPS and it is SHARP. SHIP TO: US 48 ONLY!
|
|
|
GREENLEE#731 5/8" SQUARE HOLE PUNCH PUNCH in GREAT Condition. NO CHIPS and it is SHARP. SHIP TO: US 48 ONLY!
|
|
|
GREENLEE#734 1-3/8 x 1-1/8 DOUBLE"D" HOLE PUNCH& DIE SET. PUNCH& DIE in EXCELLENT Condition. NO CHIPS and it is SHARP. SHIP TO: US 48 ONLY!
|
|
Powered by Up for auction is a used lot of miscellaneous pieces from a Greenlee Punch and Die set. Includes many punches and dies all of various sizes. Also included are numerous threads. Also in various sizes, for a knockout and or punch set. The lot is being sold as is, what is seen in the pictures is what you get. Cosmetically, all the pieces seem to be in good condition. some may have some rusting. Please look over the pictures and contact us if there are any questions. NOTE: The tool box containing the the lot is NOT the original container. The tool box is from a Milwaukee drill that is NOT included. This is the container we recieved the pieces in from the original owners. We accept PayPal. You may also pay with your credit card through PayPal. All Georgia residents will be charged sales ... moretax at the time of checkout. Payment must be received within 3 days of the close of auction. If payment isn't received within 3 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 24 hours of payment receipt(excluding Saturday/Sunday) Local pickup at our warehouse in Woodstock. GA is always welcome. Just send us a message before payment to let us know that is what you prefer. All orders are shipped via UPS or USPS. Shipping is non-negotiable. If you require shipping other than what we specify in the listing. You MUST communicate this to us before the end of the auction. If the item sells for $100.00 or more, it is our policy to require delivery and signature confirmation. If you would prefer us not to request signature confirmation, you must contact us before payment. We do not ship internationally except in special circumstances. If auctioned item requires extra packing materials to be shipped(or buyer requests extra packaging) These charges will be added to the shipping costs. If shipping via freight. We will use our preferred trucking lines and book the shipment. If you would prefer to book your own freight pickup, this MUST be communicated to us before
|
|
VTG GROBAN METAL STAMPING PUNCH SET DIE LETTERS NUMBERS ANTIQUE STEEL MADE IN CHICAGO USA ALL PIECES ARE THERE BUT ARE PROBABLY MIXED UP IN ORDER PLEASE SEE ALL PHOTOS. ENLARGE MODE AVAIL ABLE COSMETIC APPEARANCE OF BOX NOT PRETTY. S HOWS AGE BOX MEASURES 6.5" X 4" X3" HIGH EACH MEASURE 2.5" X.25" I'M AFRAID I KNOW LITTLE ABOUT THIS KIND OF ITEM HOWEVER. FEEL FREE TO ASK QUESTIONS. I'LL DO MY BEST IN ANSWERING THEM! Check out my! ONE OTHER METAL STAMPING SET International shipping: IMPORTANT: If you're okay with a tracking number that will show that I mailed the item and it left the USA. This can be mailed the cheapest way via USPS. If you would rather pay more for the tracking to your door. Then please be in touch for rates and shipping methods. Canadian ... morebidders please request a quote. Thanks. PLEASE NOTE THAT USPS SHIPPING COSTS HAVE RECENTLY GONE UP! I SHIP WITH-IN ONE BUSINESS DAY AND WITH TRACKING
|
|
|
Works just as good as new. Handy Tool. I just don't need it anymore
|
|
|
I have a green lee 767 pump which was recently rebuilt by a major company. It works great! You also get the stems for large knockouts and also down to 1/2. Included is a 2 1/2. 3, 3 1/2, and 4 inch knockout. I need to raise some cash so this is quick sale and you need to pay quickly. It will ship immdiatly upon payment received. If you want expedited shipping please ask for quote for the additional cost.
|
|
THIS IS A USED UNIT LOCATED IN THE USA. SHIPPING COST IS A FLAT $250 TO ANY LOCATION IN THE USA ON A PALLET TO YOUR HOME/WORK. THE UNIT WORKS GREAT. MINUS THE GREASE FROM LUBRICATING THE MACHINE. IT HAS 2 HOURS TOTAL RUN TIME. IT IS WIRED DIRECT TO USA 120V POWER AND READY TO GO. This machine is used for tabletting different kinds of granular raw materials into round tablets. It is applicable to trial manufacturing in lab or batch production in small amount different kinds of tablets. Sugar pieces, calcium tablets and tablets of abnormal shape. It features a small desktop type press for motive and continual sheeting. It can also be hand-operated. Only one pair of punching die can be erected on this press. Both filling depth of material and thickness of tablet are adjustable. 1. Model: TDP-5 ... more2. Max. pressure(kN) 50 3. Max. dia. of tablet(mm) 16 4. Max. depth of fill(mm) 12 5. Thickness of largest tablet(mm) 6 6. Net weight(kg) 125 7. Production capacity(pcs/h) 5.000 8. Motor(W) 550 9.voltage: 120V A. This machine is used to press all kinds of granular raw materials into tablets. As well as is used widely in making small lots of tablets, sugar tablets, calcium tablets and heterogeneous tablets in pharmaceutical, chemical industry, foodstuff factory and science research unit of hospital, etc. B. It is a type of mini desk-top electric tablet press that is operated by electricity. As well as be waved in hand, it fixed a set of die, with some characteristics of convenient use, easy to maintain,small volume and light weight.The filling depth of material, pressure and thickness of tablets are adjustable. Main technical parameter: Item. 1.5TDP. 5TDP. 6TDP. Max pressure of tablet. 15 kn. 50kn. 60kn. Max diameter of tablet. 12mm. 16mm. 25mm. Max filling depth(mm) 11mm. 12mm. 18mm. Max thickness of tablet. 6mm. 6mm. 10mm. Production capacity. 4000-6000pcs/h. 3600pcs/h. 3600pec/h. Power. 550w 1400r/min. 550w 1400r/min. 1.1kw1400r/min. Overall dimension(mm) 580x 450 x625. 580 x500 x700. 650x 600 x700.
|
|
|
ONE PER LISTING- Greenlee 11/16" 730 Radio Chassis Punch 11/16" Actual Diameter Punch and Die. Punch is in great used condition. Minor scratches/surface rust. Comes as pictured. I personally inspect each punch I sell and do my best to point out anything that I would want to know prior to purchase. I have a large variety of RC punches in stock. With only.60/ea additional shipping. So feel free to check out my other listings and save with combined shipping. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou. 1605
|
|
|
ONE PER LISTING- Greenlee 5/8" 730 Radio Chassis Punch 5/8" Actual Diameter Punch and Die. Punch appears almost new. Used once at most. Minor scratches/surface rust. Comes as pictured. I personally inspect each punch I sell and do my best to point out anything that I would want to know prior to purchase. I have a large variety of RC punches in stock, with only.60/ea additional shipping. So feel free to check out my other listings and save with combined shipping. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou. 1631 a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1406a752c14-0xf9-
|
|
|
ONE PER LISTING- Greenlee 1 1/4" 730 Radio Chassis Punch 1 1/3" Actual Diameter Punch and Die. Not for conduit(see other listings) Punch appears almost new, used maybe once or twice. Minor scratches/surface rust. Comes as pictured. I personally inspect each punch I sell and do my best to point out anything that I would want to know prior to purchase. I have a large variety of RC punches in stock, with only.60/ea additional shipping. So feel free to check out my other listings and save with combined shipping. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou. 1610{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-1406abf994e-0xff-
|
|
|