Heavy Equipment Parts & Accs - 6 - Industrial Equipment

You may also be interested in.

FUEL TANK CAP WITH GAUGE FITS YANMAR YM1500,YM2000 JOHN DEERE 850 750 950 & MORE

59.00

Buy It Now

Free Shipping

Condition: New

Location: Irvington, United States

FITS YANMAR TRACTOR MODELS; YM140, YM147, YM180, YM186, YM186D, YM187, YM187D, YM2210, YM2210D, YM226, YM226D, YM1401, YM1401D, YM1500, YM1500D, YM1510, YM1510D, YM1600, YM1700, YM1700B, YM1700D, YM1700BD, YM1900, YM2000, YM2000D, YM2210, YM2210D, YM2500, YM2610, YM2610D, YM3000, YM330, YM330D, YM336, YM336D, YM3810, YM3810D.

2 Keys for Kubota L G M Series Mahindra Mitsubishi H32412 35260-31852

4.95

Buy It Now

Free Shipping

Condition: New

Location: Noblesville, United States

# H32412. Mitsubishi Satoh Tractor and Mahindra Tractors MAH1200. Kubota L G M series. 2 KUB LGM keys, fit.

Front Grille Replaces For AM116207 Fits John Deere 415 425 445 455 BLACK

47.00

Buy It Now

Free Shipping

Condition: New

Location: Hayward, United States

Replace for AM116207. Replace AM116207. Fits John Deere models: 415 425 445 455. 1 x Front Grille. Product Gallery. For Club Car. For E-Z-Go. For Yamaha.

Seat Cushion Set - 3-Pieces Vinyl Yellow without Brackets fits John Deere 7700

123.29

Buy It Now

Free Shipping

Condition: New

Location: Lake Mills, United States

Compatible with John Deere Combine(s) 45 (s/n 6901-later), 55 (s/n 57001-later), 95 (s/n 9001-later), 96, 105 (s/n 3001-later), 3300, 6600, 6602, 6620, 7700. Backrest 2" Foam. Wrap around backrest with 2" foam.

John Deere Original Equipment Secondary Deck Drive V-Belt #M154958

38.67

Buy It Now

Free Shipping

Condition: New

Location: Hartville, United States

A Genuine John Deere #M154958 Secondary Deck Drive Belt. Used to power the lawn mower blades.

CAT C-Series Skidsteer Replacement Glass- 258-4071

319.99

Buy It Now

Free Shipping

Condition: New

Location: Elwood, United States

Glass Weight: 25lbs.

New OEM YANMAR Oil Filter 129150-35170

18.90

Buy It Now

Free Shipping

Condition: New

Location: Appleton, United States

New OEM YANMAR Oil Filter Part Number 129150-35170. Used In the following YANMAR Engines 4TNV- 4TNV82, 4TNV84T, 4TNV84T-GGE, 4TNV88, 4TNV88-GGE, 4TNV98, 4TNV98-GGE. 3TNV- 3TNV82A, 3TNV82AV-GGE, 3TNV84, 3TNV84T, 3TNV84T-GGE, 3TNV88, 3TNV88-GGE.

New 2(Two) 8" Front Self Propelled Wheels FITS Craftsman/ Husqvarna/ Sears

24.99

Buy It Now

Free Shipping

Condition: New

Location: Marlboro, United States

FRONT DRIVE WHEELS FOR CRAFTSMAN POULAN HUSQVARNA RALLY SEARS. Fits Model : Sears, Poulan, Husqvarna, Rally, Craftsman. Used on Front wheel drive walk behind mowers Fits many different Husqvarna, Craftsman, Poulan, Weedeater mowers.

OEM GENUINE CAT 363-5819 FUEL FILTER

29.95

Buy It Now

Free Shipping

Condition: New

Location: New Orleans, United States

COMPACT WHEEL LOADER. ENGINE - GENERATOR SET. INDUSTRIAL ENGINE. 908K 908M 903C2 906K 906M 914K 910K 907K 907M 903D. WHEEL-TYPE LOADER. 305.5E2 CR 308E2SR 305E2 CR 308E2CR 305E2 307E2 304.5E2 305.5E2 308E2 SR 308E2 CR 304E2 304E2 CR.

Bobcat G Series Skid Steer Door Glass - Part Number 6729776

102.29

Buy It Now

Free Shipping

Condition: New

Location: Elwood, United States

Fits the following Bobcat Models Skid Steer Loaders.

ROTARY CUTTER BUSH HOG TAIL WHEEL HUB HEAVY DUTY CAST IRON WITH 1" AXLE BOLT

42.99

Buy It Now

Free Shipping

Condition: New

Location: Swainsboro, United States

This hub will fit all 4 bolt rims on any make rotary cutter that uses a 1" axle bolt. We can't lose money because you ordered the wrong part. IF YOU DO NOT KNOW ALREADY, JESUS CHRIST DIED FOR YOU JUST HOW YOU ARE RIGHT NOW.

(2 TIRES+ 2 Tubes) 13.6-38 13.6X38 ROAD CREW R1 TRACTOR TIRES 12 PLY

1390.00

Buy It Now

Free Shipping

Condition: New

Location: Watertown, United States

TUBES INCLUDED (2 TIRES + TUBES INCLUDED) MADE IN China.

Case Heavy Equipment Key for Backhoe & Skid Steer Loader - OEM Logo A77313 D250

3.20

Buy It Now

$4.79 Shipping

Condition: New

Location: Volcano, United States

Replaces part numbers: A77313, 9703810, 307852A1 and keys marked D250.

LH & RH Lever Kit For Bobcat Bob-Tach 751 753 763 773 7753 863 873 963 #6702903

99.00

Buy It Now

Free Shipping

Condition: New

Location: Des Plaines, United States

OEM Number: For 6702903, 6713040, 6737191, 6728473, 6731119, 6578253. Replace Part Number: For 6702903, 6713040, 6737191, 6728473, 6731119, 6578253. (1) Left Hand LeverFor 6702903. LH & RH Lever Kit For Bobcat Loader 751 753 763 773 7753 863 873 963.

For Ford Hydraulic Remote Valve Kit Tractors 2000 2600 3000 3600 4000 4100 4600

218.99

Buy It Now

Free Shipping

Condition: New

Location: Northridge, United States

100% New Remote Hydraulic Valve Kit For Ford Tractors. Fits Ford Tractors 600, 800, 601, 801, 2000 4CYL, 4000 4 CYL, 2000 3 CYL, 3000, 4000 3 CYL, 2600, 3600, 4100, 4600, 2610, 2810, 2910, 3610, 3910, 4610.

New Fuel Tank with Cap FITS Ford Tractor "9N9002" (9N9030) 2N 8N 9N

119.99

Buy It Now

Free Shipping

Condition: New

Location: Marlboro, United States

Fuel Cap included: 9N9030. Fits Model: 2N 8N 9N Replaces 9N9002. fuel tank with cAP COMPATIBLE WITH ford new holland. 100% Money Back. Kumar Bros USA. is in no way affiliated with any OEM manufacturers.

Kubota Radiator Fits D1005, D1105, D1305 Engines. 451196, 106200000169, K05RAD2

399.00

Buy It Now

Free Shipping

Condition: New

Location: Orland Park, United States

Fits D1005, D1105, D1305 Engines.

3 Point Hitch Kit Fits Kubota B Series Compact Tractor Fits CATegory Fits CAT 1

148.50

Buy It Now

Free Shipping

Condition: New

Location: Webberville, United States

1 Stabilizer Bar. 2 Stabilizer Chain Assemblies. KIT CONTAINS 1 Adjustable Top Link. Replaces Part Number: HIF10-0013, S70641. Will Not Fit B3300SU, B7100, B7800 And B2620. Warranty1 Year Warranty. How do I know if my order was submitted properly?.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Past Items

Caterpillar Cat 951C Crawler Loader

1979 Cat 951C Track Loader. Runs good. Undercarriage is worn but still useable. Bucket in good condition. Needs new seatback. Our company has owned this machine for roughly 25 years. Please email any questions. All items sold as is where is. $500 Deposit due in 24 hours by PayPal. Balance due by certified bank check. Buyer responsible for all shipping costs. On Mar-21-13 at 19:16:06 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:

Somero Enterprises 3D PA target Mast Adapter P/N 62017

Somero Enterprises 3D PA Target Mast Adapter P/N 62017

Kobelco 115DZ Excavator

This is an excavator I have had for several years. It has the Cummins B4. That always starts easy. There is a cylinder that seeps some oil on the stick, and only very minor hydraulic leaks near the cab. It has a hydraulic quick coupler with a 36" bucket. The coupler uses a pin grabber, so I believe it is similar to Cat buckets. The cab shows wear, and the front glass is out. There is a small dent in the cab so the glass doesn't ride exactly right in the track, so I just took it out. The blade on this machine is a very handy feature. The machine is on a job site in Franklin, IN, and is ready to work. Call with any questions(317) 847-2697

VOLVO TD102 DIESEL ENGINE L150 LOADER

VOLVO TD102 DIESEL ENGINE SERIAL# 270314 GOOD RUNNING TAKE OUT FROM L150 LOADER HAS STARTER. NO ALTERNATOR TRANNY BEING SOLD SEPERATELY AS A CORE UNIT(NOT SHOWN) DO NOT KNOW HOURS ON ENGINE Check out my! OUR TECHS TEST RUN AND CHECK OUT ALL USED UNITS ALL ITEMS ARE FOR SALE IN OTHER MEDIA AND LOCALLY SO IF YOU WANT TO PURCHASE THE AUCTION ITEM CALL ZEE NOW AT 302.750.8440 FOR DETAILS AND PAYMENT INFORMATION OR EMAIL MRZEE102@COMCAST.NET CHECK OUT OUR STORE ITEMS BY CLICKING THIS ICON SPECIAL NOTE: DUE TO HAZERDOUS MATERIALS LAWS. ALL ENGINES AND OR EQUIPMENT MUST BE SHIPPED WITHOUT OIL OR ANTI-FREEZE AND BATTERIES. JUST A REMINDER TO FILL UNIT WITH OIL AND ANTI-FREEZE PRIOR TO STARTING AND TAKE ALL START UP PRECAUTIONS. ALL SALES ARE FINAL: SALES TAX AND ALL OTHER TAXES ARE THE RESPONSIBILITY ... moreOF THE BUYER. WARRANTY-NONE. THIS EQUIPMENT IS SOLD AS IS WITHOUT WARRANTY, EXPRESSED OF IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY/FITNESS FOR A PARTICULAR PURPOSE. SELLER IS NOT RESPONSIBLE FOR ANY/ALL DAMAGES/LOSSES OF ANY TYPE. BY BIDDING ON THIS ITEM. YOU ACKNOWLEDGE ALL QUESTIONS YOU HAVE ON THIS UNIT HAVE BEEN ANSWERED AND THE UNIT FITS YOUR NEEDS. WHAT YOU SEE IS WHAT YOU GET IN ALL PHOTOS UNLESS OTHERWISE NOTED. ANY ADDITIONAL QUESTIONS OTHER THAN WHAT IS STATED IN REGARDS TO THE LISTING MUST BE COMMUNICATED BY EMAIL. EQUIPMENT IS DESCRIBED TO THE BEST OF OUR ABILITY AND OPINIONS MAY VARY…MODEL. SERIAL# CPL’S OR ANY OTHER INFORMATION IS INCLUDED FOR CUSTOMER VERIFICATION. IF MANUALS ARE INCLUDED, IT WE BE NOTED IN THE LISTING. INSTALLATIONS/TERMS: WE DO NOT ADVISE CUSTOMERS ON WIRING OR LP/NATURAL GAS CONNECTIONS AND INSTALLATIONS IT IS STRONGLY ADVISED ALL GENERATOR WIRING AND HOOKUPS BE DONE BY QUALIFIED ELECTRICIANS. GAS COMPANIES OR EXPERIENCED GENERATOR PEOPLE. DUE TO THE DIFFERENT ELECTRICAL REQUIREMENTS/SITUATIONS OF BUYERS. WE DO NOT CONSULT ON GENERATOR INSTALLATION. WIRING, GAS REGULATORS, PRESSURES, ETC. UNITS NOT HOOKED UP CORRECTLY CAN CAUSE SERIOUS DAMAGE TO THE EQUIPMENT AND/O

Deutz diesel engine F4L 2011

This engine was pulled from a Lincoln 500 Vantage welding machine. The welding machine has a bad stater and I have decided not to fix the machine. The welder hour read out is 3950.5 hours. I used this machine for 400 hours and have not had any issues with the engine. I have a video of the engine running just before pulling it out. I can email you video if requested. I will send with this machine a new air filter housing with filter and fuel filter. Engine will be palletized in a wooden box for shipping and I will load.

JOHN DEERE 350 DOZER INJECTION PUMP LINES

I have a complete set of injector fuel lines from a machine that was recently parted out. Also will throw in the fuel pump because its been sitting for a long time and I am not sure if it still works. But all the fittings are still on it. every line is included from pump to lines in between injectors.

Cummins PT FUEL PUMP 3028791 3038432 for NH250 Military 5 ton 6x6 Army Truck

For Military 6x6 5 ton Army Truck.Cummins PT FUEL PUMP. Turns over. Condition unknown. Numbers on tag:026 3892C 0614301; 3028791 3038432. Buyer pays for shipping. Any questions call Greg at 406-727-7700. location: tub"E" Thanks! We have many used parts for a wide range of Cummins diesel engines-call or email.

Komatsu D65E-8B 8C Part List Catalog Tractor Dozer 1994 L@@K********************

You are bidding on a USED. Komatsu D65E-8B 8C Parts List Catalog Tractor Dozer 1994 The manual/ catalog was recently obtained from an estate sale. And was apart of an equipment sales service operation. This is a parts list catalog/ manual for the D65E-8B 7 D65E-8C Tractor/ Dozer. I believe dated June 1994. Covering serial numbers D65E-8B… 45001 and up and D65E-8C…45001 and up. The catalog covers part numbers. Part drawings, item description, and has a name and part number index. The manual catalog is# PEPBUILD4082. Has 722 pages, and is 6” x 8 1/2” The catalog/ manual is printed in USA. 6-94. The shipping is based on Media Mail in order to save you money! The manual is in good condition. And shows little use if any. As with a used manual. There is some light normal use wear, all as noted from ... morethe photos. The manual is SOLD AS IS with NO RESERVE. email questions before bidding. US LISTED SHIPPING RATE CHARGE IS FOR THE LOWER 48 US STATES 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13edaa49d91-0x103-

Booms/Scissors/Vertical Parts and Accessories Catalog JLG

Used Manual but in good condition Booms/Scissors/Vertical Parts and Accessories Catalog NO RETURNS NO WARRANTY NO SHIPPING OUTSIDE UNITED STATES

Skytrak - old Style Key

Skytrak Old Key NO RETURNS NO WARRANTY NO SHIPPING OUTSIDE UNITED STATES Posted with f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13eea028ff1-0xf3-

USED FUEL INJECTION PUMP , BOSCH 37510 , 0470006003 , 264P501

USED ELECTRONIC FUEL PUMP CAME OFF RUNNING ENGINE BOSCH 37510. 0470006003, 2644P501 FOR PARTS FOR MORE INFORMATION CONTACT ME

Track Groups Steel Tracks Shoe, Plow Bolts, Earnest, Black Diamond, watch fob

Here is a hard to find. Vintage, watch fob advertising heavy equipment plow bolts, track shoe bolts and nuts, etc. by Black Diamond, Earnest Machine Products, Cleveland, Ohio.

Caterpillar 215 excavator RADIATOR used. parting out machine. can ship-you pay

USED! I AM PARTING OUT A CAT 215 EXCAVATOR TRACKHOE. I HAVE MANY MORE PARTS. JUST ASK! 706-781-8221 TEXT OR CALL AND VOICEMAIL. LEAVE ME ALL FORMS OF COMMUNICATION SO I CAN REPLY. LOCATION TOO! THIS MACHINE WAS NOT PARTED OUT DUE TO COOLING FAILURE. IT WAS PARTED OUT DUE TO A FAILED HYDRAULIC PUMP. AS WITH ANY USED RADIATOR.HAVE THIS UNIT CLEANED.PRESSURE TESTED.AND RESEALED BEFORE INSTALLING. THIS IS COMMON PRACTICE WITH ANY HEAVY EQUIPMENT MAINTENANCE. FINS LOOK GOOD. TOP AND BOTTOM CAP LOOK GOOD ALSO! I HAVE A VIDEO OF THIS ON THE POPULAR VIDEO SITE. DO A SEARCH. OR. CONTACT ME FOR THE LINK. I WILL ASSIST IN SHIPPING THIS ANYWHERE IF YOU PAY ALL COSTS. PAY MY GAS FOR DELIVERY, PAY FOR PACKAGING COSTS.AND I WILL DELIVER TO ANY TRUCKING SHIPPING PORT. I AM TWO HOURS FROM ATLANTA, TWO HOURS ... moreFROM ASHEVILLE, TWO HOURS FROM CHATTANOOGA. I HAVE LOTS OF SERVICE MANUALS.PARTS.ENGINE.HYDRAULIC PARTS.MACHINES.TRUCK PARTS.ETC. ANYTHING, JUST ASK. I AM ALWAYS WILLING TO xchange this for that ALSO! IF YOU HAVE ANYTHING TO TRADE.JUST CONTACT ME WITH IDEAS! I RESERVE THE RIGHT TO END THIS AUCTION EARLY IF SOMEONE LOCAL WANTS TO BUY IT IN PERSON. THANKS!

JOHN DEERE 350 DOZER FLY WHEEL

I have a flywheel from a John Deere 350 dozer. This is from a 1535 hour machine that was recently parted. It is from a late 60's to early 70's machine that had the reverser in it. Not sure if that makes a difference or not. Also included is the clutch disk with face plate. The disk has two springs missing. Thought could be used for parts. Fly wheel is in good used condition. Will ship Weight is 112lbs. So email me for a quote. Posted with

Cummins B Series Injector 3802748-RX

5 remanufactured injectors available.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f1646adcb-0xf5-

Used Komatsu WA250-1LC Loader Shop Manual

Terex 3066C Articulated Truck Parts & Service Manuals

Used Terex 3066C Articulated Truck Parts& Service Manuals

Screed Lift Cylinders

Used Barber Greene Screed Lift Cylinders

Bendix Westinghouse AIR COMPRESSOR Diesel truck engine belt drive ?

Bendix Westinghouse AIR COMPRESSOR Diesel truck engine belt drive? Rescued out of a garage at an Estate Sale here in Denver. Seems to be complete. not frozen up. Seliing as is because I have no knowledge when it comes to these compressors.

John deere 1010 crawler Diesel Block

John deere 1010 crawler Diesel Block block looks good needs cleaned with oil pump cam and crankshaft that needs reworked. pick up only dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f2363595b-0xf3-

John deere 1010 crawler Diesel Head with injectors

John deere 1010 crawler Diesel Head with valves and injectors head is rusty and should be checked. pickup only

John deere 1010 crawler Diesel Oil Pan

John deere 1010 crawler Diesel Oil Pan looks ok

PERKINS 4236T DIESEL ENGINE

PERKINS DIESEL ENGINE MODEL 4236T. SERIAL# LJ33474U260098S HAS STARTER. ALTERNATOR, 3 BELL HOUSING 90 HP@ 2400 RPM INDUSTRIAL SET UP Check out my! ALL ITEMS ARE FOR SALE IN OTHER MEDIA AND LOCALLY SO IF YOU WANT TO PURCHASE THE AUCTION ITEM CALL ZEE NOW AT 302.750.8440 FOR DETAILS AND PAYMENT INFORMATION OR EMAIL MRZEE102@COMCAST.NET CHECK OUT OUR STORE ITEMS BY CLICKING THIS ICON SPECIAL NOTE: DUE TO HAZERDOUS MATERIALS LAWS. ALL ENGINES AND OR EQUIPMENT MUST BE SHIPPED WITHOUT OIL OR ANTI-FREEZE AND BATTERIES. JUST A REMINDER TO FILL UNIT WITH OIL AND ANTI-FREEZE PRIOR TO STARTING AND TAKE ALL START UP PRECAUTIONS. ALL SALES ARE FINAL: REMEMBER. WHEN YOU BID YOU ARE ENTERING INTO A CONTRACTUAL AGREEMENT TO BUY. SALES TAX AND ALL OTHER TAXES ARE THE RESPONSIBILITY OF THE BUYER. WARRANTY-NONE. ... moreTHIS EQUIPMENT IS SOLD AS IS WITHOUT WARRANTY, EXPRESSED OF IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY/FITNESS FOR A PARTICULAR PURPOSE. SELLER IS NOT RESPONSIBLE FOR ANY/ALL DAMAGES/LOSSES OF ANY TYPE. BY BIDDING ON THIS ITEM. YOU ACKNOWLEDGE ALL QUESTIONS YOU HAVE ON THIS UNIT HAVE BEEN ANSWERED AND THE UNIT FITS YOUR NEEDS. WHAT YOU SEE IS WHAT YOU GET IN ALL PHOTOS UNLESS OTHERWISE NOTED. ANY ADDITIONAL QUESTIONS OTHER THAN WHAT IS STATED IN REGARDS TO THE LISTING MUST BE COMMUNICATED BY EMAIL. EQUIPMENT IS DESCRIBED TO THE BEST OF OUR ABILITY AND OPINIONS MAY VARY…MODEL. SERIAL# CPL’S OR ANY OTHER INFORMATION IS INCLUDED FOR CUSTOMER VERIFICATION. IF MANUALS ARE INCLUDED, IT WE BE NOTED IN THE LISTING. DEPOSITS ARE NON-REFUNDABLE. WE ARE NOT RESPONSIBLE OF ANY OMISSIONS. SO IF YOU DO NOT SEE IT, PLEASE ASK. INSTALLATIONS/TERMS: WE DO NOT ADVISE CUSTOMERS ON WIRING OR LP/NATURAL GAS CONNECTIONS AND INSTALLATIONS IT IS STRONGLY ADVISED ALL GENERATOR WIRING AND HOOKUPS BE DONE BY QUALIFIED ELECTRICIANS. GAS COMPANIES OR EXPERIENCED GENERATOR PEOPLE. DUE TO THE DIFFERENT ELECTRICAL REQUIREMENTS/SITUATIONS OF BUYERS. WE DO NOT CONSULT ON GENERATOR INSTALLATION. WIRING, TROUBLE SHOOTING, GAS REGULA

JOHN DEERE RE526905 TURBOCHARGER TURBO FOR 6068HF485 ENGINE

For sale is a used take off VGT Turbo from a 6068HF485 John Deere engine. The reason I am listing it as"For Parts" is because I did not see it working on an engine. The turbo bearings feel good and the actuator moves when power is put to it. The actuator is 12V. I bought this for a project. But decided to go another direction. Let me know if you have any questions. Below are the parts numbers as shown in the pictures: Turbo: JD Part# RE526905 Borg Warner# 175333 Actuator: JD Part# RE523318 Borg Warner# 174774 Delphi# 25369835

4 Used Flat Proof Skid Steer Tires 14" (14X17.5) for BOBCAT 963

Premium quality flat proof tires from McLaren Industries. They are rated at 99% Life Capacity remaining. Please see the actual photos below for more details. Manufactured from heavy-duty rubber compounds. McLaren Nu-Air tires are designed to withstand the harshest operating environment and the most massive loads. McLaren tires provide maximum performance even in severe cutting conditions. The specially engineered sidewalls prevent cuts and snags, ensuring that you’ll never lose valuable time and money due to tire punctures again. Actual Specs: TIRE SIZE Width O.D. Tread Depth# of Bolt Holes Rim Size Weight w/rim(lbs) Load Capacity(lbs) 36.5X14-20 13 1/2" 36 1/2" 2.0" 20"x11" 10 582 McLaren now offers replacement tires for additional great savings! If you already have ... moresemi-pneumatic or solid tires that are worn out and ready to be replaced. You can save hundreds of dollars in rim replacements by purchasing a set of Nu-Air wheels. We have several sizes replacement Nu-Air tires to fit different rim sizes. We have tires for almost all makes of skid steer loaders including- Bobcat. Case, Caterpillar, Daewoo, GEHL, JCB, John Deere, Komatsu, New Holland and others. For additional information please call or e-mail us: sales@radmeister.com(Toll Free) 1-888-273-6487 What's included: 1 Set of 4 used skit steer tires. We have rims with 8 bolt holes. When ordering these tires. Please let us know how many bolt holes your current rims have. Product Number: RMST50X414-415X14-U99. Used Shipping: Depends on Customer's location Visit our website or e-mail us for additional info: sales@radmeister.com Or Call If you have any questions about the product please call(Toll Free) 1-888-273-6487

VINTAGE CATERPILLAR PONY STARTER HAND CRANK UA-27E

VERY USABLE. NO CRACKS OR REPAIRS, ROLLER HANDLE TURNS WELL, TEETH ARE GOOD, I SEE NO PROBLEMS. MEASURES 6-1/2 INCHES IN HEIGHT, HANDLE IS 3-1/2 INCHES IN LENGTH, INSERT PART IS 3-5/8 INCHES, HAS 1" HOLE SIZE. THIS IS EITHER UA-27E or UA-276.LOOKS TO ME LIKE UA-27E. THANK YOU FOR LOOKING. ++++ LOWER 48 SHIPPING ONLY++++'IF YOU BID AND DO NOT HAVE A US ADDRESS YOUR BID WILL NOT BE HONORED NO IF’S AND OR BUT'S…DON’T WASTE YOUR TIME OR MINE! IF YOU FEEL AS THOUGH YOU WANT THE ITEM THEN HAVE A FRIEND OR A RELATIVE OR A U.S. BUYER SERVICE BUY IT AND SHIP IT TO YOU. PLEASE LET ME KNOW BEFORE YOU BID' 1) YOUR PAYMENT IS REQUESTED WITHIN 3 DAYS OF AUCTION ENDING. FAILURE TO COMMUNICATE REGARDING YOUR PAYMENT WITHIN 3 DAYS WILL BE A COMPLAINT TO E-BAY& I WILL RE-LIST THE ITEM& ... moreYOU WILL NOT BE WELCOME ON MY SITE AGAIN. 2) I pack your purchase with the utmost care and will have it in the mail as swift as I can! I do not ship on Sat. or Sun. or holidays. I am happy to combine shipping whenever possible unless the items are two large to combine or very fragile. Shipping is more for Hawaii. Alaska unless it is shipped in a USPS flat rate box. Don't ask me to adjust my shipping charge, it is what it is! If it seems out of line, don't blame me, blame your postal service! Shipping does not include insurance but we highly recommend it.We are not responsible for USPS losing or damaging a package without insurance. 3) All items are sold" AS IS" We do not claim to be an expert on any item we have for sale. Please do not assume anything about this item. If there is something that should be on the item or something about the item and you do not see it. PLEASE ASK" No refund will be given on a missing part, wrong colors, size, etc, if it has any professional repairs that we do not have knowledge of or Buyers Remorse. Every item is described to the best of our ability and there are No Returns unless we sent you the wrong item. 4) I DO NOT INITIATE FEEDBACK. YOU LEAVE ONE I LEAVE ONE! SIMPLE

vulcan 880 wrecker bed?

I think it's a Vulcan 880 model has two winches and wheel lift its on f450 diesel chassis the chassis is 1993 ford f450 selling wrecker bed with wheel lift no chains or accessories or truck just bed! motor is blown in truck dose not run! selling bed as is like is just as I bought it! welcome to come and take look at it! pay pal payment due 24 hours of auction end! please don't bid if you don't have money or want! thanks take care no shipping local pickup! Posted with

2007 Kenworth L900

2007 Kenworth L900 Heavy hauler 550 cat engine. 18spd, 46,000 rears, double framed, has air ride suspension. Truck is in mint condition inside and out. Please feel free to call Bob qith any questions 978-423-4235.

Hiab 125-2 Truck Mounted Knuckleboom Crane

Hiab 125-2 Truck Mountable crane with a horizontal reach of 26'8" Year 2000, Includes Oil tank and pump, 415 degree rotation, Includes manual out/ hydraulic up& Down outrigger legs on both sides of crane, manual cross mount controls, weight- 3900 lbs. Capacity: 6'3"13.230 lbs 14'9"5.840 lbs 20'4.190 lbs 26'8"3.150 lbs

cat 977k l service manual and 977 k parts book

USED MANUALS FOR 977K AND L IN GOOD CONDITION I SOLD MY 977 SO I HAVE NO NEED FOR THEM ANYMORE

Caterpillar 545 Skidder (1999)

Will part out. Item is also listed locally ∼ Seller may end auction at any time. Item being sold"As Is"No Warranty! Used Motor Vehicle Dealer Deposit of $1.000.00 by either wire transfer or cashier's check. Remaining balance due by either wire transfer or cashier's check. Contact William at(804) 347-2638 ∼ Serious Inquiries Only! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f5b7dbbcd-0xf3-

1995 Series 60 DDEC III Core Motor

The motor is complete with turbo ECM. Fairly new air compressor, and jake brake. Piston seized and broken rod. It did not go through the cylinder or block.

Caterpillar Fuel Transfer Pump for 950 or 966?

What I have for sale here is what I believe to be a fuel transfer pump for a Caterpillar 950 or 966. This was not in a Caterpillar box. But it was written on the box Rebuilt Fuel Pump 950 or 966. Tag in the box had a part number of 4N4873X, back of pump has a number of 8S5582. Being sold AS-Is with NO warranties of any kind. What you see in the pictures is what you get. I will try to answer any questions to the best of my knowledge. I prefer PayPal for payment. Will ship in a U.S. Postal service medium flat rate box. Thanks! Please check out my other auction listings.

Caterpiller 225 excavator gear box and hydro pumps to fit 3208 engine

We bought the unit for the 3208 cat diesel engine with was new 500 hrs ago. The excavator cab was set on fire by vandels 5 years ago. None of the excavator was hurt except for the cab. One pump was changed when the engine was replaced. The other one was good. The charge pump was tested to be good when the engine was changed, but I dont know about the aux. pump but every thing looks good and the gear box turns free with no back lash. If you have a 225 this would be a good spare to have. I am in the generator game not in heavy equipment,so I dont need it. Dont let the low cost bother you I just want it gone. I will load and skid for free just send your truck. Please ask questions. The pumps have the pn of 9j9362 on the main pumps and 3v137 cast into the gearbox and the engine had a sae#2 bolt ... moreup. I have no numbers for the charge or aux pumps. I will skid and load for free just send your truck or I can find you a truck if you want. Thanks for looking!

hmmwv battery tie down J bolts new 12339013 M998 M1114 military Hummer Diesel

Here is the complete set of books to hold down hmmwv batteries.

Volvo Diesel Hood

This hood is in very good condition. Come off of a 2012 Volvo. If you want more detailed pictures call 6016976074. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13f697cc303-0xfb-

CAT 301.6 Mini Excavator - YR 2002 - 3003 Engine Make

CAT ERPILLAR 301.6 Mini Hydraulic Excavator Year- 2002 ~ 3003 Engine- ~ Model- 301.6/ 3003 engine ~ Time used- 2201 hours( see images) ~Year- 2002 ~ RETAILS OVER $30.000 ~ All Hydraulics/ Hose/ Electrical etc. working- Engine begins to turn. Faulting in smoke draws out of the crank case breather. As a result the engine may need replace or repaired. This machine is full of working parts and has been taken care of. New tracks were recently put on. Both final drives are in tact and working. Fuel pump, Hydraulics, electrical ETC. ALL are accounted for and working smooth. Very little rust and still has the CAT image. LARGE COST IN PARTS ON THIS MACHINE. ANY QUESTIONS AT ALL PLEASE CALL. DAN@ 440)289-7663(will respond ASAP) DELIVERY IS OPTIONAL WITH FEES MACHINE SPECIFICATIONS BELOW- Engine Model ... more3003. Net Power 13 kW. Gross Power 13.7 kW. Operating Weight 1660 kg. Operating Weight with Cab 1770 kg. Max digging depth- standard stick 2330 mm. Max reach ground level- standard stick 3800 mm. Center ground clearance 220 mm. Height over cab 2190 mm. Height over canopy 2190 mm. Max cutting height- long stick 3420 mm. Max digging depth- long stick 2330 mm. Max dump height- long stick 2470 mm. Max horizontal reach- long stick 3890 mm. Max reach ground level- long stick 3800 mm. Max vertical dig depth- long stick 1810 mm. Shipping length 3690 mm. Stick length- long stick 1090 mm. Swing radius- rear 1070 mm. Track gauge 750 mm. Track shoe width 230 mm. Width over track 980 mm. Width upper structure 980 mm. Bore 75 mm. Stroke 72 mm. Displacement 954 L. Gradeability(max) high 30 Degrees. Max traction force-

Digitrak (DCI) Eclipse location package w/ dual frequency transmitter

Package comes with receiver. Remote w/ antenna, remote 12V charger(cigarette plug powered) dual frequency purple sonde, 4 batteries, manual and two cases as pictured. NO BATTERY CHARGER. AS IS. NO WARRANTY. All components work properly. Ships inside continental US only.

CASE 580C BACKHOE PART / 580 HYDRAULIC VALVE

CASE 580 C HYDRAULIC VALVE LOOKS GOOD REMOVED FROM PARTS MACHINE

2000 Caterpillar D8R ***Used Transmission Only***

2000 Caterpillar D8R*Used Transmission Only*

CATERPILLAR E 3054 1798290 VALVE GROUP-BANK 3 -BACKHOE

1798290 VALVE GROUP-BANK 3-BACKHOE- BACKHOE LOADER Caterpillar 432D- 432D Backhoe Loader BLD00001-01594(MACHINE) POWERED BY 3054 Engine HYDRAULIC SYSTEM Brand new part cost $2.000 Posted with

18.00x33 General Tire E-4

Item Description Tire Size: 18.00x33 Manufactuer: General Model: E-4 Ply Rating: 32 Condition: Fair-Used Rock-Dmg Remaining Tread: 30/32' Shipping for this item is destination specific. Please call for an accurate freight quote. For more information on this specific tire. Please contact us and reference tire# T187 Pictures shown are for illustration purposes only. Actual product may vary. Please contact us for photos of actual item up for purchase. Please click here to: Not what you're looking for? If we don't have what you're looking for. Please contact us with your needs. We have a large inventory of used parts not listed. We are part of a vast dealer network giving us access to hundreds of dealer's inventories which means, if we don't have it in stock, odds are we ... morecan get it. We also offer rebuiling services so contact us for a highly competitive quote to get your machine up and running again. Why American Independent. Inc. We are an independent shop specializing in powershift transmissions for heavy equipment Caterpillar® tractors. Since opening our doors in 1988. We've rebuilt over 9,000 components for scrapers, loaders, dozers, haul trucks, etc. To learn more about our capabilities and familiarize yourself with our company, as well as see some pictures of our facility, please visit our website: American Independent. Inc. has one of the largest inventories of exchange components on the planet. At last count we had over 100 exchange CAT® transmissions on hand, as well as many differentials, torque converters, final drives, and several other drive train components on the shelf and ready for shipment. For many of these applications we offer two very competitively priced options: Rebuilt- Our rebuilt components are what we like to call"top-shelf" They are assembled with all new bearings. And premium Cat® parts. They are built to give long, trouble free service hours and carry a 1 year/ 2,000 hour warranty on parts and workmanship, with extended warranty option

18.00X25 General Tire E-3

Item Description Tire Size: 18.00X25 Manufactuer: General Model: E-3 Ply Rating: 28 Condition: Good-Used Remaining Tread: 32/32' Shipping for this item is destination specific. Please call for an accurate freight quote. For more information on this specific tire. Please contact us and reference tire# T84 Pictures shown are for illustration purposes only. Actual product may vary. Please contact us for photos of actual item up for purchase. Please click here to: Not what you're looking for? If we don't have what you're looking for. Please contact us with your needs. We have a large inventory of used parts not listed. We are part of a vast dealer network giving us access to hundreds of dealer's inventories which means, if we don't have it in stock, odds are we can get ... moreit. We also offer rebuiling services so contact us for a highly competitive quote to get your machine up and running again. Why American Independent. Inc. We are an independent shop specializing in powershift transmissions for heavy equipment Caterpillar® tractors. Since opening our doors in 1988. We've rebuilt over 9,000 components for scrapers, loaders, dozers, haul trucks, etc. To learn more about our capabilities and familiarize yourself with our company, as well as see some pictures of our facility, please visit our website: American Independent. Inc. has one of the largest inventories of exchange components on the planet. At last count we had over 100 exchange CAT® transmissions on hand, as well as many differentials, torque converters, final drives, and several other drive train components on the shelf and ready for shipment. For many of these applications we offer two very competitively priced options: Rebuilt- Our rebuilt components are what we like to call"top-shelf" They are assembled with all new bearings. And premium Cat® parts. They are built to give long, trouble free service hours and carry a 1 year/ 2,000 hour warranty on parts and workmanship, with extended warranty options of up to

16.00X25 General Tire Super LCM E-4

Item Description Tire Size: 16.00X25 Manufactuer: General Model: Super LCM E-4 Ply Rating: 22 Condition: Good-Used Remaining Tread: 51/32' Shipping for this item is destination specific. Please call for an accurate freight quote. For more information on this specific tire. Please contact us and reference tire# T31 Pictures shown are for illustration purposes only. Actual product may vary. Please contact us for photos of actual item up for purchase. Please click here to: Not what you're looking for? If we don't have what you're looking for. Please contact us with your needs. We have a large inventory of used parts not listed. We are part of a vast dealer network giving us access to hundreds of dealer's inventories which means, if we don't have it in stock, odds are we ... morecan get it. We also offer rebuiling services so contact us for a highly competitive quote to get your machine up and running again. Why American Independent. Inc. We are an independent shop specializing in powershift transmissions for heavy equipment Caterpillar® tractors. Since opening our doors in 1988. We've rebuilt over 9,000 components for scrapers, loaders, dozers, haul trucks, etc. To learn more about our capabilities and familiarize yourself with our company, as well as see some pictures of our facility, please visit our website: American Independent. Inc. has one of the largest inventories of exchange components on the planet. At last count we had over 100 exchange CAT® transmissions on hand, as well as many differentials, torque converters, final drives, and several other drive train components on the shelf and ready for shipment. For many of these applications we offer two very competitively priced options: Rebuilt- Our rebuilt components are what we like to call"top-shelf" They are assembled with all new bearings. And premium Cat® parts. They are built to give long, trouble free service hours and carry a 1 year/ 2,000 hour warranty on parts and workmanship, with extended warranty option

Tested John Deere 490E Excavator Radiator

This is a used tested radiator for a John Deere 490E excavator. Its in good condition and comes with a 30 day warranty. I also have many other parts for this machine and many others. I will palletize. Get freight rates and assist with shipping.Please feel free to contact me with any questions.Mike(253) 536-0600

EXCALIBER 100hp INDUSTRIAL TIRE SHREDDER

The Excaliber 1100 Series industrial shredder is designed to shred auto& truck tires. Pallets, white goods, solid waste, composting, automotive fenders, panels& doors, aluminum castings, plant waste, drums, plastic, electronic scrap and other industrial processing applications. The shredder has a 46" long cutting chamber& and is powered by a 100 hp electric motor and a infeed conveyor. The shredder utilizes a Smartpac PLC controller for hydraulic shock absorption of the drive train, soft/smooth starts, auto reverse, overload protection& diagnostic display. Payment by PayPal, wire transfer, certified funds, or company check(10 day hold on company checks) Payment should received within 10 days of auction end or the item will be relisted unless other arrangements have been ... moreapproved. The buyer to arrange& pay for all handling and transportation.

Yanmar 4TNE98-NMH High Pressure Injection Pump

Used Yanmar 3.319L 4TNE98-NMH 8 valve high pressure injection pump. Engine had a lower end failure. Engine ran good until failure. Family: YD3300PNVCEC 5YDXL3.32P4N. Posted with

Utility Body Bed Box for Bucket Crane Service Truck. 50" Cab-Axle & 102" Overall

Utility Body for Single Rear Axle Service Truck. 96" Cab-Axle- 190" Overall. Thank you very much for your interest in our products! Description Suitable for Dually Small Trucks. Extension Shelf Available. Plenty of Storage Boxes. If this is not what you need please email us the distance between the cab and the axle of your truck to see if we have an utility box for you. Send us with your best offer. We are offering an Utility Body Bed for Service Bucket or Crane Truck 50" Cab-Axle& 102" Overall Lenght and 94" Wide. Used. These Utility Bodies are perfect for Dually Utility Bucket Trucks or Service Trucks. Email us for more information. Payment Please be sure to read the entire description and understand what you are bidding on prior to placing a bid or buy the item ... moreavailable. Pay with PayPal. To use PayPal just click on the"Pay Now" button in eBay and follow the instructions to securely send your payment. Pay with Credit Card. If you do not have a PayPal account you still can pay with credit card. In this case. Please do not try to pay by using the button"Pay Now" on the eBay page because it will cause a delay on the transaction. For a faster. Secure, and effective transaction please email us(see logo) to send you a PayPal invoice so you can pay with your credit card. Pay with Wire Transfer. Please email us(see logo) to send you the wire transfer instructions. Additional quantities are available for some items. If you wish to purchase additional items please email us(see logo) We may be able to post more for you at a better price. Payments are due within 3 days of the end of auction date or purchase. If payment is not received. An unpaid item case will be opened. More information? Please do not hesitate to email us(see logo) if you have any question before bidding or buying. Shipping Shipping Quote Request. Please email us(see logo) your shipping address to quote you the best shipping service price. We do not profit from the shipping cost. We partner with several fr

l92 cylinder heads

These are l92 heads used for 65k miles. They need a bit of cleaning up but are in fine shape.These heads do not come with rockers.

Case Skid loader Quick Attach Bucket. 60", very good condition. Make offer!

Long story short. My father was a bit of a hoarder. Unfortunately he passed away in august of last year and I've been left to the task of organizing his hoard(a 4000 square foot shop completely full) So over the next few months I'll be listing tools, shop supplies, building materials, antiques, and anything else I find as I go through boxes after boxes. This is a bucket that came off of an 80's model case skid loader. the loader is gone. But the bucket still remains. I thought the bucket was in too good of shape to scrap. This is a 60" bucket that is 20" tall, 21" deep, inside edge to edge of the mounting brackets are 25" the outside edge to edge to edge is 36" and from center of the pin to center of the pin is 30 5/8" give or take) this bucket is ... morein great shape. If you have any questions feel free to ask. I am offering this for local pickup but I can deliver it within a 60 mile radius of Gallatin. MO for an additional $30. If you would like to have this shipped via freight I can load it on a skid. And deliver it to a local terminal. but all other shipping arrangements must be made on the sellers end. all offers will be considered. So shoot! thanks for looking

Clutch Kit Reman International 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706

Clutch Kit Reman International 706. 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288 PPA, 6 Pad Disc, Release& Pilot Bearings; Flywheel Step 1.406" Size 12" Type Single Stage Core Charge $24. CLUTCH WARRANTY POLICY This warranty is in lieu of any other warranty. Whether expressed or implied. All warranties are to the installing owner only, and are void if equipment is used in tractor pulling contests. A copy of the numbered and dated original installation shop ticket must be furnished with warranty claims, when requested. All warranty parts must be returned for inspection before warranties are issued. Discs, Pressure Plates and LUK Clutches have a One Year Parts only warranty. There is no warranty on Bearings. Warranty does not cover burnt release ... morelevers. Flywheels must be ground to correct specifications. All stock parts are subject to a 15% restocking charge. Special order parts are not returnable. 405300K Updated 2012-10-04. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f85094603-0x102-

Cummins Case Injector 7mm KDAL 59P7 Tip P274 PSI: 3550 Reman. - No Core

This is remanufactured Cummins or Case 7mm injector. It has the following markings: KDAL 59P7. Tip: P274 PSI: 3550. Payment is expected within 48 hours from the end of auction. We accept PayPal only. We ship using UPS to verified/confirmed PayPal address only. No P.O. Boxes or APO/FPO. We ship to the contiguous U.S. only. No Pick-ups. I try to describe these items as best I can. So ask questions and look at the photos. We have been in business of selling construction equipment parts since 1979. Give us a call(859) 266-5819. Thanks for looking. www.caywoodtractor.com

Allis Chalmers Injector 6000 7000 10000 11000 HD6G HD6A HD7G 745 745H HD6EP

This is a remanufactured fuel injector for Allis Chalmers 6000. 7000, 10000 and 11000 engines. Holder Assembly 4359369, Nozzle 4321933, PSI: 3825. No core charge. This injector may fit the following and other machines, but check with your dealer: 745 745H HD6A HD6G HD6AG, HD6B, HD6E, HD6EP, HD7G HD12G Payment is expected within 48 hours from the end of auction. We accept PayPal only. We ship using UPS to verified/confirmed PayPal address only. No P.O. Boxes or APO/FPO. We ship to the contiguous U.S. only. No Pick-ups. I try to describe these items as best I can. So ask questions and look at the photos. We have been in business of selling construction equipment parts since 1979. Give us a call(859) 266-5819. Thanks for looking. www.caywoodtractor.com

Vtg Dash Control Panel for a BULLDOZER or CATERPILLAR ~Compressor/Pressure~MORE~

Vtg Dash Control Panel for a BULLDOZER or CATERPILLAR ~Compressor/Pressure~MORE~ Description Vintage DASH CONTROL PANEL for what I believe is a smaller BULLDOZER/CATERPILLAR/Earth moving piece of equipment. It could be from the 1930-40's. I'm not sure. Because I know that JOHN DEERE made small dozers that were yellow colored during this same time. The panel shown and listed is in real good condition. The heavy metal frame from all the instrument is straight as original. No dings or bends. All guages are present as pictured. Large COMPRESSOR TERMINAL PRESSURE GAUGE on left is 3-1/2" in diameter with a glass face Smaller gauge. Second from the left at 1.75" in diameter COMPRESSOR INTERSTAGE AIR PRESSURE with a hard plastic face Next smaller gauge moving left to right is AMPRES ... moreat 1.75" in diameter with a cracked glass face next. A 1.75" WATER TEMP gauge with a glass face The last small 1.75" diameter gauge is OIL PRESSURE with a hard plastic The larger gauge to the far right is a TACHOMETER with a 3-1/2" diameter glass face. Note the indication for RPM's is time 10.000. I would say that the panels and guages all look quite good and I took a number of pictures from the back to show what cables and hookups were present. Also. The two yellow smaller buttons on the front are functional. The smaller hard knob does pull out easily to one click, much like a headlight button that does push in/clicks out that I believe is the"STARTER" Panel itself is 20" wide when not including the cylinder reset on the left. About 22" when RESET is included. 7" high x about 4" deep. Please enlarge all pictures to see the condition and details the best. I will combine shipping on multiple items. When possible, to save on shipping costs. Shipping insurance is included on all items($1.50 charge for this has been added per item for insurance costs)

John Deere 850K Dozer Cab

Cab has minor damage on right door stop and top but is in good overall condition. For more info call Mac at 979-220-9700. Cab is located in Texas for pick up. Posted with

John Deer 450J, 550J, 650J Hydraulic Pump

Part number AT224355 Hydraulic Pump. This is a used pump came off a low hour machine. The dozer it came off of had a thru drive pump installed due to having a winch put on the machine. The pump is fully operational. Further questions contact seller.

Cylinder Head Remachined Hercules 478 11641633 **LOADED** NEW VALVES & SPRINGS

Cylinder Head Remachined Hercules 478 3 Cyl DIESEL 11641633 WHITE 2-155*LOADED* NEW VALVES& SPRINGS. Cylinder Head Definitions: New– New aftermarket. Bare without valve hardware unless otherwise stated. Re–mach. Re–machined) Sent through machine shop to be cleaned. Checked& ready to install the valves. If stated loaded then valves& hardware are within spec or replaced with new parts as needed. Loaded cylinder heads will be ready to install. Reman– Cylinder heads are bare with new guides& new seats and are from a head shop that may or may not of made repairs or welds to the cylinder head to make it usable again. Cylinder heads are bare unless otherwise stated. Good Used– Cylinder head are cleaned to be& magged for cracks. All used heads are bare without valve hardware unless ... moreotherwise stated. Any used head containing hardware. The hardware has no type of guarantee or warranty of any kind. All used heads are guaranteed no cracks or welds. 11641633-5E3K1E8-ZT Updated 2013-06-27. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

Cylinder Head Reman Allis Chalmers 262 4516681, 4512284, 4514282, 4514790, 45166

Cylinder Head Reman Allis Chalmers 262 6 Cyl DIESEL 4516681. 4512284, 4514282, 4514790, 4516673 D17, D19*BARE* NEW GUIDES& SEATS. Additional Core Charge of $ 100 Required Cylinder Head Definitions: New– New aftermarket. Bare without valve hardware unless otherwise stated. Re–mach. Re–machined) Sent through machine shop to be cleaned. Checked& ready to install the valves. If stated loaded then valves& hardware are within spec or replaced with new parts as needed. Loaded cylinder heads will be ready to install. Reman– Cylinder heads are bare with new guides& new seats and are from a head shop that may or may not of made repairs or welds to the cylinder head to make it usable again. Cylinder heads are bare unless otherwise stated. Good Used– Cylinder head are cleaned to be& ... moremagged for cracks. All used heads are bare without valve hardware unless otherwise stated. Any used head containing hardware. The hardware has no type of guarantee or warranty of any kind. All used heads are guaranteed no cracks or welds. 4516681-3I3K5E8-WW Updated 2013-06-27. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

Cylinder Head Reman Allis Chalmers 301 4006933, 4006936, 4008087, 4023469 *BARE*

Cylinder Head Reman Allis Chalmers 301 6 Cyl DIESEL 4006933. 4006936, 4008087, 4023469 7000, 7010, 7020, 8010, L2, M2*BARE* NEW GUIDES, SEATS& TUBES. W/ BRASS TUBES. Additional Core Charge of $ 100 Required Cylinder Head Definitions: New– New aftermarket. Bare without valve hardware unless otherwise stated. Re–mach. Re–machined) Sent through machine shop to be cleaned. Checked& ready to install the valves. If stated loaded then valves& hardware are within spec or replaced with new parts as needed. Loaded cylinder heads will be ready to install. Reman– Cylinder heads are bare with new guides& new seats and are from a head shop that may or may not of made repairs or welds to the cylinder head to make it usable again. Cylinder heads are bare unless otherwise stated. Good Used– ... moreCylinder head are cleaned to be& magged for cracks. All used heads are bare without valve hardware unless otherwise stated. Any used head containing hardware. The hardware has no type of guarantee or warranty of any kind. All used heads are guaranteed no cracks or welds. 4006933-3I1D5E8-WW Updated 2013-06-27. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

Cylinder Head Reman Allis Chalmers 200 4008088, 74008088, 4007449, 74007449

Cylinder Head Reman Allis Chalmers 200 4 Cyl DIESEL 4008088. 74008088, 4007449, 74007449, 4007318, 4021035, 4007807 6060, 6070, 6080, F2, F3, K2*BARE* NEW GUIDES, SEATS& TUBES. Additional Core Charge of $ 100 Required Cylinder Head Definitions: New– New aftermarket. Bare without valve hardware unless otherwise stated. Re–mach. Re–machined) Sent through machine shop to be cleaned. Checked& ready to install the valves. If stated loaded then valves& hardware are within spec or replaced with new parts as needed. Loaded cylinder heads will be ready to install. Reman– Cylinder heads are bare with new guides& new seats and are from a head shop that may or may not of made repairs or welds to the cylinder head to make it usable again. Cylinder heads are bare unless otherwise stated. ... moreGood Used– Cylinder head are cleaned to be& magged for cracks. All used heads are bare without valve hardware unless otherwise stated. Any used head containing hardware. The hardware has no type of guarantee or warranty of any kind. All used heads are guaranteed no cracks or welds. 4008088-3I1K5E8-WW Updated 2013-06-27. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

Crankshaft Remachined International DT-466E/I530E 1821913C1, 1821914C1 OEM

Crankshaft Remachined International DT-466E/I530E 0.10 Rods/ 0.10 Mains 6 Cyl DIESEL 1821913C1. 1821914C1 For pre 2000 year model engines only OEM. Crankshaft Definitions: New Aftermarket. Crankshaft warranty varies by make and supplier, please contact us for specific warranty information. Reman/Remanufactured Crankshafts has been welded and ground down to a fresh surface. Remachined/Reground Crankshafts have been polished or ground down at machine shop to a fresh surface. Used Crankshafts are Good Used Take outs. Warranty: Inspection& fit warranty only no returns after engine is started or crankshafts are altered. 6736M1010-RI Updated 2013-06-27. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email ... moreor by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

Crosley Swivel Hook

This crosley hook came on a imt 6025 boom factory it has never lifted anything it was replaced with one for a different application the paint is worn where the hook was attached to the eye hook on boom itself for storage. Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f8d888713-0xf2-

Rotation Gearbox for Utility Bucket Trucks Boom Lifts Digger Derricks Cranes

Rotation Gearbox for Utility Bucket Trucks Boom Lifts Digger Derricks Cranes Thank you very much for your interest in our products! Description Different models and sizes. New. Used,or Remanufactured. Contact us before making any offer or buying with your specifications. We are offering Rotation Gearboxes Utility Bucket Trucks. Boom Lift, Digger Derricks, Cranes. New and Used. Altec. Versalift, Hi-Ranger, Terex, Teco, and others. Tis item are in perfect operational condition. Price shown is the lowest referencial price for an used rotation gearbox. Español Estamos ofreciendo Cajas de Engranajes de Rotación para equipos de elevación hidráulicos cesta. Grúas perforadoras(taladros hidráulicos) gruas y otros. Estos productos puden ser nuevos. Reconstruidos o usados. ... moreTenemos Altec. Versalift, Hi-Ranger, Terex, Teco, y otros. El precio es el mas bajo para una caja de engranajes de rotación usada. Payment Please be sure to read the entire description and understand what you are bidding on prior to placing a bid or buy the item available. Pay with PayPal. To use PayPal just click on the"Pay Now" button in eBay and follow the instructions to securely send your payment. Pay with Credit Card. If you do not have a PayPal account you still can pay with credit card. In this case. Please do not try to pay by using the button"Pay Now" on the eBay page because it will cause a delay on the transaction. For a faster. Secure, and effective transaction please email us(see logo) to send you a PayPal invoice so you can pay with your credit card. Pay with Wire Transfer. Please email us(see logo) to send you the wire transfer instructions. Additional quantities are available for some items. If you wish to purchase additional items please email us(see logo) We may be able to post more for you at a better price. Payments are due within 3 days of the end of auction date or purchase. If payment is not received. An unpaid item case will be opened. More information? Please do not hesitate

Complete Continental TMD20 Diesel Engine removed from Case 1835c Skid Steer

This auction is for a Continental TMD20 three cylinder diesel engine removed from a Case 1835C Uniloader Skidsteer last week. The engine has broken a rod and damaged the engine. It is complete as seen in the pics. The engine was running and running well just before this happened. In fact it was still running after the engine blew. The engine is probably best used for parts. These are often used on generators. Welders etc. It has a good starter, alternator, head, injection pump and many other parts or if you are handy you might fix it. It is sold as is and where is. I can load in your truck or for your shipper. Any questions please ask. Thank you Will accept personal or bank checks given 10 days to clear.

12"x2" Hydraulic brake backing plates for trailer

These do have wear on the shoes but do have a little bit of material left. The close up of the shoe shows the thinnest area. Cylinders do not leak. They come off of a rental trailer that the tongue was jack-knifed. Because its a rental the backing plates were changed also.

Swivel Joints for Utility Bucket Trucks Boom Lifts Digger Derricks Cranes

Swivel Joints for Utility Bucket Trucks Boom Lifts Digger Derricks Cranes Thank you very much for your interest in our products! Description Different models and sizes. Contact us before making any offer or buying with your specifications. We are offering Swivel Joints Utility Bucke Trucks. Boom Lift, Digger Derricks, Cranes. New and Used. Altec. Versalift, Hi-Ranger, Terex, Teco, and others. Tis item are in perfect operational condition. Price shown is the lowest referencial price for an used swivel joint. Español Estamos ofreciendo Juntas Rotativas para equipos de elevación hidráulicos cesta. Grúas perforadoras(taladros hidráulicos) gruas y otros. Estos productos puden ser nuevos o usados. Tenemos Altec. Versalift, Hi-Ranger, Terex, Teco, y otros. El precio es el ... moremas bajo para una junta rotativa usada. Payment Please be sure to read the entire description and understand what you are bidding on prior to placing a bid or buy the item available. Pay with PayPal. To use PayPal just click on the"Pay Now" button in eBay and follow the instructions to securely send your payment. Pay with Credit Card. If you do not have a PayPal account you still can pay with credit card. In this case. Please do not try to pay by using the button"Pay Now" on the eBay page because it will cause a delay on the transaction. For a faster. Secure, and effective transaction please email us(see logo) to send you a PayPal invoice so you can pay with your credit card. Pay with Wire Transfer. Please email us(see logo) to send you the wire transfer instructions. Additional quantities are available for some items. If you wish to purchase additional items please email us(see logo) We may be able to post more for you at a better price. Payments are due within 3 days of the end of auction date or purchase. If payment is not received. An unpaid item case will be opened. More information? Please do not hesitate to email us(see logo) if you have any question before bidding or buying. Shipping Shipping Quote R

Gradall Rear Hydraulic Pump Motor 001840RB 001840 RB

Gradall Rear Hydraulic Pump Motor 001840RB 001840 RB Description: Up for your consideration is one(1) new old stock(NOS) remanufactured Gradall Rear Hydraulic Pump Motor 001840RB. Motor is new and unused and has just been sitting on warehouse shelving in governmental maintenance department and needs to go to someone who can put it to use. Inventory OB70-72-80-25-00 Payment: All payments are due within 4 days of purchase or within 4 days of end of auction or unless otherwise agreed upon by barbaragenesattic prior to purchase. Shipping: We strive to ship all items within one(1) business day of receiving payment. Payments received on Fridays will be shipped the following Monday unless following Monday is a holiday. If following Monday is a holiday item will ship on Tuesday. Winning bidder will ... morebe notified via email through ebay. USPS, UPS or Paypal when item is shipped with shipping information. Tracking number for shipment can be found in purchaser's purchace history under item purchased. If shipping other than by one of the above methods email will be sent through ebay messages with shipping information. Insurance For all Domestic sales $75.00 and over. Insurance is provided through Auctiva. For all International Sales- Insurance is required on all sales(regardless of final sales price) and is included in our quoted shipping and handling charges for this listing. Insurance is provided through Auctiva. Terms of Sale: Payments are due within four(4) days of purchase or auction closing. Items will be shipped within one(1) business days. Returns are accepted if received within fourteen(14) days after original shipment date and items must be returned in original shipped condition. Returns must be returned with insurance. Actual cost of return insurance will be reimbursed. Buyer responsible for return postage. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's

Grove Scissorlift Upper Control Box Case

I have for sale a grove upper control box for a scissor lift. This is stripped of all components. If you have a broken case this is for you. Check my other auctions for great deals. Thanks. Posted with

used fuel injectors for ford tractors......for parts or repair

13 used fuel injectors for ford tractors. various types. These injectors are for repair or parts only these are not new. look like some were used.

King Pin Reamer Adjustible Freightliner-Kenworth-Peterbilt etc....

This Is a used Kingpin Reamer used to Ream out the neopriem this is a must have in order to install king pins properly when you are fitting the King pins in a big rig the sizes it goes up to is 1 25/32- 2 3/32 I gave over $500 when I bought this new I have no use for it now if you are a diesel mechanic then you know what this is shipping will be $25.00 due to weight thank you. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f917f41f9-0xf2-

Powers Crane with auger, complete hydraulic system. Optional aerial tower F-750

This auction is for the crane with auger only- NOT the entire truck. Although it could be purchased all together as a complete unit. It is a complete system which is separate from the aerial tower portion of the truck and is a separate unit from the utility body. It has it's own separate PTO. Pump and hydraulic system. You are bidding on the portion which is bolted to the rear of the truck behind the utility body and will also get the pump and all hydraulics. Due to the size and weight, it is local pickup only& is located in Sheffield Village Ohio 44054. I will not remove from the truck until a $500 non refundable deposit is made. The crane/auger are still mounted on the truck and i will need a week or so to get it removed and ready to be picked up. The crane and auger work the way ... morethey are intended, but there is a small hydraulic leak coming from inside the crane arm- i'm not sure if it's a hydraulic cylinder leaking or if it's a hose. The only thing it could be, is for extending the arm out. Also, the crane has large diameter ROPE, not steel cable. Look at the photo, showing my thumb as a comparison. It's very heavy duty rope and when i get a chance, i will take a video showing it lifting an engine or something heavy- i just want to make you aware that it's not steel cable. Here is a youtube video of the auger in operation- i was ripping tree roots out. From that oak tree next to it& it did it easily: You may also buy the entire truck. For $5,500.00 the way you see it. It's a 1974 F-750. It's such a big heavy truck, it's probably worth about half that amount in scrap, so buy it& take what you want from it and scrap the rest. It has a Ford gas FE engine(probably a 390) and runs extremely well with a manual transmission and a 2 speed rear end. The tires are in poor shape- dry rot, but hold air. You can see it has an aerial tower also, that goes very high. It would be a good vehicle if you had to work under bridges or street light or any situation where you needed to

VOLVO ARTICULATED HAULER HYDROSEEDER BM 527

VME ARTICULATED HAULER HYDROSEEDER VOLVO BM 527 TYPE 5350 ROPS MODEL 4 736 717 CAB SERIAL# 06777 VOLVO 6CY DIESEL 6X6 WHEEL DRIVE TIRES ARE 50% OR BETTER BRAKES ARE GOOD- ALL AIR HYDRAULICS&nbsp ALL THE HYDRAULICS WORKS; S-35183 VAXJO SWEDEN IF ANY QUESTIONS PLEASE CONTACT US AT 423-736-5136 OR 423-736-8703 Posted with

CASE 680C SWING CLY USED

CASE 680C SWING CYL 25.00 HANDING FEE PLEASE CALL 1-603-767-7679 FOR ANY INFO 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f98ba380c-0xea-

case 310 front grill

case 310 front grill 25.00 handling fee for more info please call 1-603-767-7679

CASE 680 STABLIZER CLY

CASE 680 STABLIZER CLY USED SOLD AS IS AS SEEN 25.00 TO HANDLE AND BOX PART FOR SHIPPING ANY MORE INFO PLEASE CALL 1-603-767-7679

INGERSOLL RAND CAPACITOR FOR LIGHT PLANT PART# 36883478

Up for bid is a INGERSOLL RAND CAPACITOR FOR LIGHT PLANT PART# 36883478 Posted with

CATERPILLAR PONY MOTOR off of a D6 CAT complete as shown - for parts

Found in a clean up Tag states that it ran in 2011 when removed and has been kept indoors until brought home by us this last week- now on a skid waiting to be shipped Turns over fine States there was a crack and there is evidence of an old weld below the starter bracket as in picture I dont know any more than i can see and that it turns over- thats all Appears to be complete with gas tank- lost gas cap in trip home- oops Am selling for parts since that is all I know Now the canned part- CONTACT ME– Please call with questions before you bid at 443-262-6605 and leave a message and I will call you back– mostly in the evenings as I work some crazy hours. Ya do what ya got ta do these days. International buyers should always contact me prior to bidding as it always gets complicated. INSPECTION– ... moreYou are encouraged to ask all your questions or even stop by and check out item prior to bidding. Item is available for sale locally. PAYMENT- Payment is due within 5 days of auction. CASH is ok upon pickup. WIRE TRANSFER is ok. PICK IT UP I will gladly keep this item for up to 60 days if you want to stop by and pick it up. I have a forklift and will load it on your truck or trailer. No extra charges. SHIP IT BY FREIGHT You are ultimately responsible for shipping arrangements. Estes is our most frequently used LTL carrier in this area. Contact Jennifer at Uni-shippers 800-383-0096 for reasonable estimates if you don’t have a preference of carriers Pickup is at G&G Machine in Chestertown MD 21620- We have a forklift and have no hidden shipment prep/ loading charges. I quality inspect all items before they leave my hands. I skid. Block, band and stretch wrap as necessary. I will send you pictures of your item when it is skidded and ready to go if you desire. I will not be held responsible for items once they leave our dock– that is between you and your shipper. INSURANCE I take great pride and care in packaging and shipping the items I sell. Please buy insurance with your carrier if you are concerned. If ins

ASV 4500 SKID STEER LOADER, BOBCAT GEHL HYDROSTATIC TRANSMISSION HYDRAULIC PUMP

Nearly new working hydraulic hydrostatic pump/transmission removed from ASV 4500 Positrack skid steer loader. Loader was a test loader that was ran for a short while and then dismantled. Unit has 720 hours on it. May work on other skid loaders etc. Do some research and find out before bidding. Thank you. We will pallet and ship. Discount shipping available to a commercial dock with forklift. Prices range from around $100-$200 anywhere in the continental US Feel free to send message with any questions and we will attempt to answer them.

DEUTZ F2L511 diesel engine, fits Bobcat 631, Case uniloader and more, 415 hours

Deutz F2L511 air cooled 4 cycle diesel engine-unit was removed in great running condition from an Ingersol Rand rotary screw compressor with 415 hours on the working hour meter. 2 cylinder. 1650 CC or 1.6 liters, 17:1 compression ratio-31.5 hp or 23kw@ 2500rpm. 3000 max rpm. 800 min rpm-direct injection(no precombustion chambers) This provides optimum fuel efficiency, and torque-CCW flywheel rotation. As view facing flywheel. Both cylinders compression test at over 400psi-80 psi of oil pressure at idle(800+/ rpm) starts instantly on the coldest days with enrichment feature for cold starting on the Bosch injection pump. NEW Bosch fuel injectors. And gaskets-NEW intake air preheater for assisting in easier cold weather starts. includes SAE# 5 bellhousing. Flywheel, flywheel adapter for torque ... morecoupling, front engine mounts, fuel and water separator/ filter, 12 volt starter, and alternator. Also included are the intake and exhaust manifolds. Fuel shutoff with Bosch 12 volt solenoid are incorporated into the injection pump. Unit is currently bolted to a pallet. And testable. Engine starts and runs great. It is powerful and smooth through the RPM range, and does not smoke at all. We would be happy to run the engine if anyone would like a demonstration, or email you the video we have taken of the engine being started and running. This model of engine was originally in the 631 Bobcat Skidloader. Earlier Case uniloaders, Case(Davis) trenchers, Ditch witch trenchers, Vibratory rollers, Water pumps, Lincoln and Miller Generator welders(250-350 amp) small articulated wheel loaders, air compressors, etc. This was known as one of the most dependable and longest running engines in its size range, the internally balanced, gear timed engine will generally exceed 10,000 hours of usable life. Air cooled engine provides an easy alternative in older implements when replacing a tired Wisconsin or other air cooled gasoline engine. Without the need to add a radiator, external fans, etc. Currently bolted to a p

Case 450D dozer 6 way blade Hydrostatic NR

Case D450 Dozer w/6 way blade Let me begin by stating that I don't not know how to estimate the undercarriage and I don't know what they mean when someone asks about"pins being turned" If you have a F350 and a 8 ton trailer you can haul this dozer. I bought this dozer about 6 years ago to clear some property. I am a novice and didn't use it that much just a couple of weeks per year. When I bought it I had new sprockets put on the back and had a set of tracks(used) but in very good shape installed. These are the newer tracks that have 4 bolts bolting them together instead of the old pin type that had to be driven out. Either was NEVER used on this dozer. It starts with just a hit of the starter button. Runs very strong. The brakes work as they should. It is hydrostatic ... moredrive with high and low. Very simple to operate. There are a couple of hydraulic cylinders that need new seals. They don't leak they just seep when it sits. I have only put one gallon of hydraulic fluid in it in 6 years. Does NOT use or burn oil. Currently has about 4600 hours on it. The serial number is 3060507. I have the original operators manual. Auction must be paid in full within 7 days. It can be stored in my pole barn for as long as you like. If you arrange shipping. I will load it. Powered by The free listing tool. List your items fast and easy and manage your active items.

Jeep Liberty Wheels Size: 16" x 7", 5 Lug, 4.5" Bolt Pattern 02-06

Factory Alloy Rims 2002- 2006 Jeep Wheels: 16" 7" 4.5 bolt in good condition! Machined edge W/ silver 5 spoke finished. No bends or cracks. A absolute steel for this price! Part# 9056

Over The Tire Steel Tracks McLaren Diamond 10DMV8

B.S.T. Trading Company LLC. Buy. Sell. Trade. Consignment. One set of two McLaren Over the Tire Steel Tracks These tracks appear to be new with only surface rust. They came off of a 743 Bobcat with 10-16.5 tires. There is 5 extra links that come with this set. Happy Bidding We accept all major credit cards We now offer financing Our goal it a satisfied customer! All items are sold as is unless specifically stated otherwise. We do our best to describe all items correctly to present them to you as they are. We recommend that if you are interested in any of our items you take the time to inspect before bidding and or buying. If you have specific questions please feel free to ask and we will do our best to answer. Per any request we can provide detailed pictures. Feel free to call to set up a ... moretime to come see before buying. B uy S ell T rade or C onsignment 610-327-2009 M-F 8:00am to 4:00 pm Sat& Sun by appointment only We can deliver these tracks for free within 50 miles of Pottstown. PA 19465. Please contact us for delivery charge outside of 50 miles. Local pick up is available as well. If paying by personal or business check. Funds must clear our bank before taking possession of item(7-10 days) Immediate possession if paying by cash, credit card,or cashiers check. Pay Pal is only accepted for deposit on this item. Please see our additional checkout instructions before bidding. Buying, or making an offer.

2006 Moffett M550 Forklift OPERATOR MANUAL HOLDER

Hello. You are bidding on a part that was removed from a vandalized forklift. Pick up is available most weekdays 7AM to 3PM. Closed weekends. Please confirm before you come. Shop is 740-986-2025 at 103 N. Main St. Williamsport. OH 43164. God Bless and happy bidding! Powered by

Cat/Caterpillar E-70 Mini Excavator Quick Coupler w/ Pins

For sale is a quick coupler for a Caterpillar E-70 Mini Excavator. Coupler comes with pins. Sold as is. Where is. No Warranties. PayPal not accepted for local pickup. Please contact us to make payment arrangements. If paying by PayPal. Item must be shipped to PayPal verified address. FREE SHIPPING WITHIN 25 MILES ONLY or will load for Free For shipping quotes please contact Tom at Access America at(866) 453- 6146 Pick up location at MSA in Sterling. CT 06377 Feel free to email with any questions or concerns Or call Marshall at(401) 568- 4400.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f9d21381b-0x101-

CONTINENTAL TM20 3 CYLINDER ENGINE GAS LONG BLOCK WITH COVERS

For sale is just the engine. It is being pulled from a Generator set. The auction is for THE LONG BLOCK ASSEMBLY only the accessories and all other parts will be sold separately! The engine fires up and runs smoothly. Can be heard running in the unit locally if interested. International buyers are welcome pleases let me know ahead of bidding. Please contact with questions prior to bidding 281-830-8001

Crankshaft Remachined Case 251 267 284 301 336 A22578 OEM small main 0.10 Rods

Crankshaft Remachined Case 251. 267, 284, 301, 336 0.10 Rods/ 0.10 Mains 4 Cyl DIESEL A22578 OEM small main. Crankshaft Definitions: New Aftermarket. Crankshaft warranty varies by make and supplier, please contact us for specific warranty information. Reman/Remanufactured Crankshafts has been welded and ground down to a fresh surface. Remachined/Reground Crankshafts have been polished or ground down at machine shop to a fresh surface. Used Crankshafts are Good Used Take outs. Warranty: Inspection& fit warranty only no returns after engine is started or crankshafts are altered. 5309M1010-ZB Updated 2013-06-26. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered ... moreare drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

Cummins Injector Adjustment Kit

This has all the parts to it. Everything works, this is a good deal, on ebay there is one other kit for $391 and its missing the gauge so this is a deal for sure

Utility Body Bed Box for Bucket Crane Service Truck. 57" Cab-Axle (SOLD)

Utility Body Bed Box for Bucket Crane Service Truck. 57" Cab-Axle& 108" Overall(SOLD) Thank you very much for your interest in our products! Description Suitable for Dually Small Trucks. Extension Shelf Available. If this is not what you need please email us the distance between the cab and the axle of your truck to see if we have an utility box for you. Send us with your best offer. We are offering an Utility Body Bed for Service Bucket or Crane Truck 57" Cab-Axle& 108" Overall Lenght. Used. This Utility Body are perfect for Dually Utility Bucket Trucks or Service Trucks. Email us for more information. Payment Please be sure to read the entire description and understand what you are bidding on prior to placing a bid or buy the item available. Pay with PayPal. To ... moreuse PayPal just click on the"Pay Now" button in eBay and follow the instructions to securely send your payment. Pay with Credit Card. If you do not have a PayPal account you still can pay with credit card. In this case. Please do not try to pay by using the button"Pay Now" on the eBay page because it will cause a delay on the transaction. For a faster. Secure, and effective transaction please email us(see logo) to send you a PayPal invoice so you can pay with your credit card. Pay with Wire Transfer. Please email us(see logo) to send you the wire transfer instructions. Additional quantities are available for some items. If you wish to purchase additional items please email us(see logo) We may be able to post more for you at a better price. Payments are due within 3 days of the end of auction date or purchase. If payment is not received. An unpaid item case will be opened. More information? Please do not hesitate to email us(see logo) if you have any question before bidding or buying. Shipping Shipping Quote Request. Please email us(see logo) your shipping address to quote you the best shipping service price. We do not profit from the shipping cost. We partner with several freight carrier and have a good cha

BOBCAT HYDRAULIC TILT BUCKET CYLINDER 500 600 610 SKIDLOADERS

hydraulic tilt cylinder for bobcat 500 600 610 skidloader it is in good used condition. thanks

CAT C7 Oil Pump

Up for sale is a new/ used high pressure oil pump from a cat C7 engine serial#KAL05142. The pump is#10R3144 and has a value of around $1200 and a core cost of $520, this pump was someone's mistake at trying to fix a engine by throwing parts at it, engine would not start, customer throws new High pressure pump at it, still no start, they tow it to me, I check it out and engine has very low compression, they end up with new engine and I have this pump that was installed and cranked over but never ran( new/used) any questions please drop me a line Posted with

BOBCAT 610 SKIDLOADER ENGINE DRIVE SHEAVE

We have a good used drive sheave off of a bobcat 610 skidloader. It is in great condition and ready to install on your tapered crankshaft wisconsin engine. buyer pays all shipping costs.

ASV RC100 Axle 0201-130

ASV/ TEREX RC100 Axle ASV Part Number 0201-130 Lashley Part Number 0001887 THIS IS JUST FOR the ONE AXLE- THANK YOU.

MUSTANG FUEL CAP 420-35589 NEW - FREE SHIPPING !!!

MUSTANG FUEL CAP NEW in wrap PN 420-35589 M3B 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13fa80e0e8d-0xfa-

CATERPILLER D2 D4 ALUMINUM FUEL CAP 4B5389 DIESEL TRACTOR CRAWLER DOZER

CATERPILLAR ALUMINUM FUEL CAP DOZER TRACTOR CRAWLER- D2 D4 4B5389 INSIDE MEASURMENT IS 4" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fac60feac-0x105-

BOBCAT SKIDLOADER 610 VARIABLE SPEED DRIVEN SHEAVE

Variable speed driven sheave removed from a real good 610 bobcat skidloader. bushings and pins are real nice. ready to go buyer pays all shipping costs. Thanks f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13fae00acc3-0xe9-

John Deere 200LC Excavator Final Drive

This is a complete used final drive for a John Deere 200LC excavator.It has been inspected and resealed and is ready to ship.This is the 16 bolt cover version. There IS a difference. Comes with a 30 day warranty. The price reflect a $1000 core charge which will be refunded once we receive your core. We pay return freight on your core. NO INTERNATIONAL SHIPPING ON THIS ITEM.I also have other parts for this machine and many others. Please feel free to contact me with any questions you may have.Mike(253) 536-0600

bobcat skid steer safety lever hydraulic lock out

Hydraulic lock out levers for older Bobcat skid steer loaders.

Cylinder Head Reman Yanmar 3T84 3 Cyl DIESEL 3T84 950 Bare New Guides And Seats

Cylinder Head Reman Yanmar 3T84 3 Cyl DIESEL 3T84 950 Bare New Guides And Seats Additional Core Charge of $ 350 Required Cylinder Head Definitions: New– New aftermarket. Bare without valve hardware unless otherwise stated. Re–mach. Re–machined) Sent through machine shop to be cleaned. Checked& ready to install the valves. If stated loaded then valves& hardware are within spec or replaced with new parts as needed. Loaded cylinder heads will be ready to install. Reman– Cylinder heads are bare with new guides& new seats and are from a head shop that may or may not of made repairs or welds to the cylinder head to make it usable again. Cylinder heads are bare unless otherwise stated. Good Used– Cylinder head are cleaned to be& magged for cracks. All used heads are bare without valve ... morehardware unless otherwise stated. Any used head containing hardware. The hardware has no type of guarantee or warranty of any kind. All used heads are guaranteed no cracks or welds. 3T84-3I3K6E8-WW Updated 2012-12-04. To avoid delays we recommend checking stock and availability prior to hitting"Buy it now" We can be contacted through eBay. By email or by phone. Many of the products offered are drop-shipped from the manufacturer to keep prices as low as possible. Items over 100 lbs are recommended to be shipped"truck freight" Call for truck freight quote. We do not use freightquote.com; however we can beat most freight quotes found on our truck freight listings. TRUCK. AIR AND INTERNATIONAL FREIGHT ARE NON-REFUNDABLE for any reason. All customs duties and fees are up to the buyer and not included in any shipping costs. See our page for other terms and conditions. THANK YOU R.F. Engine 877- 222- 9649

International TD-6 Final Drive Cover

Untitled Document International TD-6 Final Drive Cover Item Description This item is in Fair condition. Please see photos for a detailed look. Payment Information We accept payment by Paypal. Credit Card. We want to ensure you are 100% happy with your purchase so please check your goods on the day of delivery. Payment should reach us within 7 days and items will not be dispatched until full payment has been received and cleared. New York residents must add their local sales tax,please wait for invoice for amount. All PayPal shipments must have a Verified Address. We will not send orders to unconfirmed addresses. Due to new Ebay policies as of 1/15/09 we are no longer allowed to accept MO's,we apologize for any inconvenience this may cause. Shipping Information Items are usually dispatched ... morewithin 24 hours of receipt of cleared payment during Monday to Friday. All items are dispatched via USPS. All postage and packing charges are shown in the item description. Please note these charges are non-negotiable and include handling and packaging. If you are unhappy with these charges please do not bid on this item. All items shipped to Hawaii and Alaska are subject to a 50% increase. Please note: If the item description is Local Pickup Only there will be no shipping option. We apologize we are no longer shipping to Canada or internationally unless agreed. Return Policy We will honor requests made for returns within 14 days of receipt of your package only if item is not as decribed or pictured(excluding stock photos of items) All photos are of actual piece unless otherwise stated. Refund will be given upon receipt of the item as long as it is in the same condition as when shipped.We apologize shipping is non refundable.Any refunds given will be for item amount only. If you have any questions concerning this auction please call or email us with any questions. You can call during regular business hours: 631-744-9400 Check out our other auctions.

Caterpillar 151-5551 working generator control panel

This is a working caterpillar 151-5551 control panel. It was taken off of a running unit because we replaced the controls with a newer gen set controller. If you have any questions feel free to ask. This unit is guaranteed to work and I am very open to offers. But this unit goes for 10k new from caterpillar.