|
|
Order by: |
0 bids Free Shipping
Condition: New – Open box Location: Camden, United States
PORT SIZE ( WATER) 3/8". PORT SIZE ( OIL ) - SAE 12. IT DOES NOT INCLUDE HAWAII, ALASKA, PUERTO RICO, GUAM, OR ANY OTHER US ISLAND TERRITORIES.
Buy It Now
Free Shipping
Condition: New Location: Fort Smith, United States
0 bids Free Shipping
Condition: New Location: Ontario, United States
Specification： Item Weight：5.7 kg Package Size：20"x 12"x 3.5" Size：15x12 Inch Material：Copper Aluminum Steel Thickness：3.5" Installation Method：Strut-Mounted Item Package Quantity：1 Handle Material：Metal Plug Profile：Embedded Usage：Commercial/Residential Max Power: 2000W Tank Capacity: 3.2QT/3L Number of Oil tank containers Features：.
0 bids Free Shipping
Condition: Used Location: Garfield, United States
0 bids Free Shipping
Condition: Used Location: Holgate, United States
Buy It Now
Free Shipping
Condition: New Location: Mauston, United States
This kit will work with most coils being sold on other sites that are 3.5" wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4" are actually 3.5".
0 bids Free Shipping
Condition: Used Location: Scottsburg, United States
Buy It Now
Free Shipping
Condition: New Location: , United States
One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water.
Buy It Now
Free Shipping
Condition: New Location: Decatur, United States
Condition is New.
Buy It Now
Free Shipping
Condition: New – Open box Location: Knoxville, United States
Never used, removed from new unit (Open Box).
0 bids $16.50 Shipping
Condition: Used Location: New Ipswich, United States
Tubed Cold Plates. The CP10 is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate.
Buy It Now
Free Shipping
Condition: New – Open box Location: Yale, United States
0 bids Free Shipping
Condition: Used Location: Berlin, United States
Model: M10. If this is not what you are looking for, call. conveyors, ovens, washers, etc. We have more than 20 years of experience. We have over 30 different used. powder coating, liquid coating and electrocoating.
Buy It Now
Free Shipping
Condition: New Location: Mauston, United States
This kit will work with most coils being sold on other sites that are 3.5" wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4" are actually 3.5".
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Brazing Material: 99.9% pure copper. Material: sus304 stainless steel. Its design is fashionable and generous and it will bring you a comfortable bath in the cold winter. It is made of sus304 stainless steel,so it is high quality and durable use.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product description: ★The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2" FPT is used for one side of the swimming pool water and 1" FPT is used for hot water. ★The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. ★The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr.
0 bids $200.00 Shipping
Condition: New – Open box Location: Amelia Court House, United States
INGERSOLL RAND 39804745 300/150PSI SHELL TUBE HEAT EXCHANGER cooler,oil w/c 90d. Opened box . Original box but will be heavily re tapped.Not an Ingersoll Rand Authorized Dealer. No Manufacturer’s Warranty implied.
Buy It Now
$96.00 Shipping
Condition: New Location: Červený Kostelec, CZ
The casing is made of sheet aluminium and sealed with hot glue. The outgoing and incoming air flows between the plates and transfers energy to each other. Only the heat is transferred. for your heat recovery ventilation systems and air recuperative project.
0 bids Free Shipping
Condition: Used Location: Delta, United States
Model:HF-201-HY-1P-B 260372. 1/2IN NPT ADAPTER ON ONE END, 3/8IN NPT ADAPTER ON THE OTHER. Thread Type:NPT. Shell Material:Brass. Tube Material:Copper. Shell Inlet/Outlet Size:1/2 IN. Tube Inlet/Outlet Size:1 IN.
Buy It Now
$25.00 Shipping
Condition: New Location: Strafford, United States
Torch design allows easy starting of the fire in Classic Edge, E-Classic and Maxim models.
0 bids Free Shipping
Condition: Used Location: Scottsburg, United States
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Brazing Material: 99.9% pure copper. Material: sus304 stainless steel. Its design is fashionable and generous and it will bring you a comfortable bath in the cold winter. It is made of sus304 stainless steel,so it is high quality and durable use.
0 bids Free Shipping
Condition: New – Open box Location: Millersburg, United States
Model EC160. Looks to be the EC160 type. Lift Tables. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. This is a single pass unit.
Buy It Now
Free Shipping
Condition: New Location: Linwood, United States
This is a new part. I had unsealed the box to take the pictures.
0 bids Free Shipping
Condition: New – Open box Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Side of Hot Water Pipe: 2.54cm/1in FPT. 1 1/2" FPT is used for one side of the pool water and 1" FPT is used for hot water. This design ensures that the water source is clean and free of contamination.
Buy It Now
$118.00 Shipping
Condition: New Location: , PL
All our products are new and have 12-months warranty, unless otherwise stated.
0 bids Free Shipping
Condition: New – Open box Location: Delta, United States
Tube Material:Copper. Diaphragm Valves. Solenoid Coils. Solenoid Valves. Ball Valves. Gate Valves. Knife Gate Valves. Heating and Cooling.
0 bids Free Shipping
Condition: Used Location: Sun Valley, United States
We have 4 units available, the price is for a single unit only. If the item is listed as working, then it was tested to the best of our ability. HOURS OF OPERATION.
Buy It Now
Free Shipping
Condition: New Location: Brick, United States
NEW, Factory Sealed, Never Used! Whether you're a professional contractor or a DIY enthusiast, this product is easy to install and maintain. Made from high-quality materials, this product ensures durability and longevity.
0 bids Free Shipping
Condition: New Location: Delta, United States
Hoisting and Rigging. Fuse Holder. Circuit Breakers. Plug Valves. Safety and Security. Electrical Enclosures. Rotary Lobe Blowers. Roller Chains.
Buy It Now
Free Shipping
Condition: New Location: Mauston, United States
This kit will work with most coils being sold on other sites that are 3.5" wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4" are actually 3.5".
0 bids Free Shipping
Condition: New – Open box Location: Chandler, United States
0 bids $15.00 Shipping
Condition: Used Location: Clio, United States
.24 VDC FAN. Stainless Steel Tubes. MODEL: 4110G10SB Heat.
Buy It Now
Free Shipping
Condition: New Location: Lockport, United States
McLEAN MIDWEST HX-2016-001 Heat Exchanger 115 Volt. Made in USA. Sold as pictured.
Buy It Now
Free Shipping
Condition: New Location: Joliet, United States
Buy It Now
$3.50 Shipping
Condition: New Location: Kansas City, United States
TP-0755 3/4" 15-22.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product description: ★The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2" FPT is used for one side of the swimming pool water and 1" FPT is used for hot water. ★The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. ★The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr.
Buy It Now
Free Shipping
Condition: New Location: Carrollton, United States
One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Lift Tables. Country of Manufacture N/A. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
Free Shipping
Condition: New Location: Mauston, United States
Other sizes available. This makes the area inside of your plenum 1" longer. Tubing is 1/4" copper. This also includes the installation kit shown in the pictures above. This easy to install kit takes all of the work out of installing a coil.
0 bids $18.00 Shipping
Condition: New Location: Allentown, United States
up for sale is a new in the box B&G heat exhanger
0 bids Free Shipping
Condition: Used Location: Berlin, United States
Model: M10. If this is not what you are looking for, call. powder coating, liquid coating and electrocoating. in the design, manufacture, and installation of finishing systems including. product handling, energy efficiency, floor space, and budgets in order to.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Four thickened MNPT ports for your easier installation. Compact Design: Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings.
Buy It Now
Free Shipping
Condition: New Location: Fredericksburg, United States
Raychem # FZGARD-CCH-2C-240 / SELF REGULATING CRANKCASE HEATER. NEW OLD STOCK, ORIGINAL PACKAGE, OPENED FOR PIC'S. (INCLUDES INSTRUCTIONS).
Buy It Now
Free Shipping
Condition: New Location: Amery, United States
Pentair WCHE01926002 Heat Exchanger 230/1/60 VStorag3
0 bids Free Shipping
Condition: Used Location: Lawrence, United States
For sale is LYTRON ES0510G23 HEAT EXCHANGER pulled from working unit as is.
0 bids Free Shipping
Condition: Used Location: El Paso, United States
44.0000 x16.0000 x9.0000.
Buy It Now
Free Shipping
Condition: New – Open box Location: North Hollywood, United States
Open box but new product The item still sealed in factory wrapped What you see in pictures is what you gonna get.T12
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Product description: ★The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2" FPT is used for one side of the swimming pool water and 1" FPT is used for hot water. ★The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. ★The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr.
Buy It Now
$28.00 Shipping
Condition: Used Location: Morgantown, United States
MFG: OILTECH. Model: B10THX50 / 1P-SC-S. mac cooling cap: 55kw ( at oil flow 150 l/min at deltaT 40 deg). Length: 11.25. With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
0 bids Free Shipping
Condition: New – Open box Location: Galion, United States
But when available in multiple quantity, the photo shown is representative of the item. What's Included?. See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos then it will not be included with the item.
0 bids $35.00 Shipping
Condition: New Location: Southbridge, United States
0 bids Free Shipping
Condition: Used Location: Middlebury, United States
115V Single Phase. Will there be a dock or forklift. To get a freight quote we will need to know the following Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Free Shipping
Condition: New Location: Saint Germain, United States
Central Boiler Chimney. Central Boiler Electrical. Central Boiler Unit Heaters. Central Boiler Misc. Can be used if a fan only is needed for the High Output Draft inducer for Classic CL-7260. Authorized supplier of Central Boiler Parts and all other Outdoor Wood Furnace supplies.
Buy It Now
Free Shipping
Condition: New – Open box Location: Joplin, United States
Duda Energy Brazed Plate Heat Exchanger B3-12-020-1.0.
0 bids Free Shipping
Condition: Used Location: Leander, United States
Manufacturer: Tenez/API Schmidt. Welded threaded connections (not sure the thread size, pipes are 35.5mm OD). All-welded Stainless construction. All wetted parts are stainless. CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product.
0 bids Free Shipping
Condition: New Location: Frisco, United States
copper tube heat exchanger. part number WR86X10021.
0 bids Free Shipping
Condition: Used Location: Park Falls, United States
SONDEX INC. SF25A-1G-14 PLATE TYPE HEAT EXCHANGER MFG. 2013 STOCK H105530 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY)AUTHENTICITY GUARANTEED!WE SOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product description: ★The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2" FPT is used for one side of the swimming pool water and 1" FPT is used for hot water. ★The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. ★The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr.
|
|
|
MEC Loc: FYD-1055 Posted: DS USED Frick Company Heat Exchanger– Shell& Tubes National Board No: 52030 Max Allowable Working Pressure Shell: 300 PSI@ 20 to +200°F Tube: 300 PSI@ 20 to +300°F O.A. Length w/Flanges: 10'11" Shell O.D. 10" CONDITION Has not been tested Good used condition Approx. Shipping Dims 13ft L x 3ft W x 3ft H We’ve supplied pic’s for your inspection and review. Call or email with questions or additional info. We have more process related equipment in our inventory so. Call us 207-757-8201 or email@ Visit to see our ever changing inventory of sawmill. Industrial and process related equipment and machinery. Contact Info The Equipment Connection US Rt. 2 PO Box 180 Smynra Mills. ME 04780 Office: 207-757-8201 Fax: 207-757-8202 Cell: 207-694-2041. ... more207-694-0400. 207-538-7374 www.maineequipmentconnection.com email: equipconn@fairpoint.net SHIPPING DETAILS All items sold are shipped FOB our Smyrna Mills. ME location, unless otherwise noted. The actual shipping cost to be determined and calculated based on your location. Since each item's and each customer's shipping needs are unique, shipping costs and methods will vary by item and customer. Shipping details will be configured at time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 04780. TERMS All items are sold“AS-IS. WHERE-IS” Items are described to the best of our knowledge, however, we(THE EQUIPMENT CONNECTION and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of ant item. All sales are final. Buyer is responsible for actual shipping unless otherwise noted. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. FEEBACK We do our best t
|
|
American Standard Shell& Tube Heat Exchanger, 316 Stainless Steel, Shell size is 14" x 3" Overall length is 16-1/2" not including fittings, Heat transfer surface area is 4.3 SqFt- Four tubeside passes, Tubeside flow is 12 GPM, Design pressure is 150 psi tubeside and 225 psi shell side, Maximum temperature is 450° F, Shell pipe size is 1" Tube pipe size is 3/4" Each quadrant of the shell has fourteen tubes which are 1/4" OD and.210" ID- see photos, These were removed from lab equipment and were used to cool deionized water, American Standard became ITT Standard and more recently Standard Xchange, This unit is similar to the Standard Xchange 03014 SSCF, Used- Excellent condition- minor rust on mounting feet and bolts which are not stainless steel, ... moreCombined shipping is available- please request a combined invoice, Please contact us if you have any questions, We charge 8.25% sales tax for all items shipping within Illinois. Including local pickups. Tax exemption is available if we are provided with a valid Illinois resale certificate.
|
|
Xchanger Inc. TV-075 Heat Exchanger From our inventory. We are selling a Xchanger Inc. Heat Exchanger. Specifications: Model# TV-075 Pipes In/Out: 1 1/2" 1.9" OD) Flanges In/Out: ID 3" BCD 6" 4 x 3/4" Bolt holes OD 7 1/2" More Information: R3-2-B 86 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 86 lbs. To calculate shipping. Payment Types We are ... moreonly allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mi
|
|
|
Tranter SuperMax. Welded plate, heat exchanger(Max Operating Temperature = 356 Degrees F. 20 transfer Plates) 37 sq. ft. Contact Information Bob Swanson Harvest Energy Inc. 231-670-9316 Please limit calls to 8:00am to 5:00pm Eastern Standard Time. ALL ITEMS MUST BE PAID WITHIN SEVEN DAYS. BUYER RESPONSIBLE FOR HANDLING,SHIPPING,INSURANCE,CUSTOMS,DUTIES ETC. PAYMENTS ACCEPTED; PAYPAL, CHECK, PAY ON PICKUP- ITEM SHIPS AFTER FUNDS HAVE BEEN CREDITED TO OUR ACCOUNT. THANKS
|
|
|
For sale is a used ITT Bell& Gossett GPX Heat Exchanger- Model GPX258B s/n 761041-01 New in 2000 The National Board# 68398 That's all we know. Purchased at a surplus equipment auction. We have no history with this exchanger or any like them. We just buy and sell. Take a look at all of the photos as we show the name plates with all the data. The openings are 4" and 15" deep. If you need any questions answered please ask and we will try to help. Exchanger sold as is where is. We will secure to the pallet shown in the photos for shipping. Buyer pays for shipping. We will load on to buyer truck.Thank you for looking.
|
|
YOU ARE BUYING ONE STAINLESS STEEL VACUUM HEAT EXCHANGER WATER IN WATER OUT. MANUFACTURE AND PART NUMBER UNKNOWN. WHAT IS PICTURED IS WHAT YOU WILL RECEIVE. THIS UNIT IS GUARANTEED CLEAN AND WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G4 FRONT) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my other items! Be sure to add me to your favorites ... morelist!
|
|
Used Heat Exchanger For Model R20G Ovens. Serpentine Exchanger Only, In Good Working Condition*There is a $75.00 Pallet/Strapping Fee. Approx. Shipping Weight: Please call 480-968-7470*Approx. Shipping Dimensions: Please Call 480-968-7470*Unit Worked When We Pulled It Out Of Bakery. Certified Technician's on Staff To Inspect& Make Sure All Equipment In Working Condition. We Can also get New Equipment. Buyers are required to set up and pay for Shipping/Freight. You can call Crystal Foote With Freight Quote and she will help you set up freight 1-800-323-5441 ext# 1349. OR You can call Jennifer Rendine W/Freight Center and she will help you set up freight as well# 1-800-716-7608 Ext. 1019 OR You can call a Freight Company Of Your Choice. Pick Up Address: 4551 E. Ivy St. 101, Mesa AZ 85205. ... moreAny Questions you can call Tiffany@ 480-968-7470. We Do Not Except Returns, All Items Are Sold As Is. PAYMENT OF ITEMS We accept PayPal and all major credit cards by phone Payment must be completed within 3 days of auction or sale end If payment has not been made 6 days after we will send a final notice SHIPPING AND CLAIMS ALWAYS examine all items for damage BEFORE accepting them from shipper Used equipment will be shipped as described Please allow up to 3 days after payment has been received for item to be shipped The buyer is responsible for filing claims with the shipping service. We will give you any information you need If anything is wrong with the item please note it on all copies of the bill of lading and immediately contact the trucking company KEEP your packaging MISC If you have any problems or concerns contact us immediately and we will assist you If you are considering leaving negative feedback please contact us first We will give your situation priority service Please read these conditions carefully If you have any questions feel free to call us at 480-968-7470 When ordering please supply us with all delivery information Whether it is a business or residence Whether or not you will need a lift gate The na
|
|
Imation High Pressure Shell& Tube Heat Exchanger 1AA002 100 PSI Shell THIS ITEM IS USED. IT WAS REMOVED FROM A WORKING SYSTEM. WE HAVE SEVERAL OF THESE UNITS. THEY ARE ALL IN FAIR CONDITION. WITH THE SAME MAKER, MODEL AND SPECIFICATIONS. THE ONE YOU RECEIVE MAY NOT BE THE EXACT ONE PICTURED. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL: 1AA002 APPROX. PRODUCT DIMENSIONS: WIDTH: 20" LENGTH: 7" HEIGHT: 7" SHIPPING WEIGHT: 35 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER ... moreIS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE IT
|
|
APV PLATE-STYLE HEAT EXCHANGER TYPE: H17GLMGS10 YEAR: 1998 DESIGN PRESSURE: 145 PSIG TEST PRESSURE: 218 PSIG DESIGN TEMP( MAX/ MIN) °F: 350/ 20 NUMBER OF PLATES: 53 APPROX. WIDTH OF PLATES: 10-1/4" APPROX. DEPTH OF PLATES: 7-3/4" APPROX. HEIGHT OF PLATES: 35-1/4" INLETS: 2" FLANGES OUTLETS: 2" FLANGES NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited ... moreorders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if rec
|
|
Thermatron Stainless Tubes Heat Exchanger + Fan 732TPP0B01 ~1680W You are bidding on used: Thermatron Stainless Steel Tubes and Copper Fins Heat Exchanger + Fan 732TPP0B01 Dissipated Heat: ~1680W Thermatron Engineering LTD. Thermatron Stainless Steel Tubes and Copper Fins Heat Exchanger Cooling Water System + Fan 732 Series Model: 732TPP0B01 Dimensions: ~ 25cm x 23cm x 6.5cm Outer diameter of tubes: ~16mm Inner diameter of tubes: ~11.5mm Dissipated Heat: ~1680W at Δ =30 °C For specifications: This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by Email or Phone. ... moreBefore contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom.
|
|
Thermatron Stainless Steel Tubes Heat Exchanger 731MPJ2A01 + Fan ~1140W You are bidding on used: Thermatron Stainless Steel Tubes and Copper Fins Heat Exchanger 731MPJ2A01 with Fan ~1140W Thermatron Engineering LTD. Model: 731MPJ2A01 Stainless Steel Tubes and Copper Fins Heat Exchanger Water Cooling System with Fan Dimensions: ~ 27cm x 15cm x 15.2cm Internal Tube Diameter: ~ 12mm Nidec Alpha V Fan TA600 Model A30322-10 P/N 930714 230VAC 175A Thermally Protected Dissipated Heat: ~1140W at Δ =30 °C For specifications: http:www.thermatroneng.com/products/730/model_731.html This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are ... morenot satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 b
|
|
266 SQ FT BAC Baltimore Aircoil Superchanger Plate Heat Exchanger/Press EC5-068 USED IN WORKING CONDITION. 4" PORTS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# EC5-068-2MH SERIAL# OVERALL DIMENSIONS: WIDTH: 28" LENGTH: 52" HEIGHT: 64" SHIPPING WEIGHT: LBS: 1700 OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS ... moreAND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOM
|
|
Product Specifications. Brand: ITT, Condition: Used, Model: 5-201-06-060-004, Weight: 100 lbs, Dimensions: 65 x 10 x 10 in, SKU: B267172, Category: Miscellaneous, Additional Notes: TCF COMPLETE HEAT EXCHANGER SHELL/TUBE-300/150PSI, Product Photos. $1250 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship our items within 1 to 2 business days of receiving payment. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern ... moreTime. We only ship through UPS. Collect shipping must be through your UPS account. If the item is to be shipped on a skid please contact us for a competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your eBay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence. We put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer hassle-free refunds! All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. If you
|
|
Thermal Transfer Products Heat Exchanger SA-614-2-4-F 300 PSI THIS HEAT EXCHANGER IS USED. BUT IN GOOD CONDITION. IT WAS REMOVED FROM A WORKING SYSTEM. 1" PORTS. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL: SA-614-2-4-F APPROX. PRODUCT DIMENSIONS: WIDTH: 4.5" LENGTH: 20" HEIGHT: 4.5" SHIPPING WEIGHT: 35 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE ... moreWEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTIO
|
|
Stainless Steel Tubes Copper Fins Heat Exchanger Water Cooling System ~1530W You are bidding on used: Stainless Steel Tubes Copper Fins Heat Exchanger Water Cooling System ~ 1530W Dimensions: ~24.5cm x 23cm x 6cm Inner Diameter of tubes: ~8mm Dissipated Heat: ~ 1530W at Δ =30 °C(similar to Thermatron heat exchanger model 732 http:www.mb-electronic.de/sites/default/files/files/de/kuehlung/pdf/thermatron_waermetauscher_120416.pdf) This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! ... moreIf you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive your item within 26 business days afte
|
|
Lumenis Heat Exchanger Water Cooling System SA2322002-A Dissipated Heat ~600W You are bidding on used: Lumenis Heat Exchanger Water Cooling System SA2322002-A ~ 600W Lumenis Heat Exchanger Stainless Steel Tubes Copper Fins Water Cooling System SA2322002-A Dimensions: ~19cm x 22cm x 10cm Inner Diameter of tubes: ~ 8mm Dissipated Heat: ~ 600W at Δ =30 °C(similar to Thermatron heat exchanger model 732 http:www.mb-electronic.de/sites/default/files/files/de/kuehlung/pdf/thermatron_waermetauscher_120416.pdf) This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately by ... moreEmail or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office an
|
|
Lytron Stainless Steel Heat Exchanger TF6970G1 Dissipated Heat~ 2200W You are bidding on used: Lytron Stainless Steel Heat Exchanger with Copper Fins TF6970G1 Dissipated Heat: ~ 2200W Lytron Stainless Steel Heat Exchanger with Copper Fins Cooling Water System Part no. TF6970G1 Cust P/N 0633-841-01 Dimensions: 26.2cm x 8.6cm x 27.2cm Inner Tube Diameter: ~7.70mm Outer Tube Diameter: ~9.60mm Dissipated Heat: ~ 2200W at Δ =30 °C(similar to Thermatron heat exchanger model 732 http:www.mb-electronic.de/sites/default/files/files/de/kuehlung/pdf/thermatron_waermetauscher_120416.pdf) This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason ... moreyou are not satisfied with your purchase please contact us immediately by Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item withi
|
|
Stainless Steel Water Cooled Laser Heat Exchanger Dissipated Heat ~ 1250W You are bidding on Used: Stainless Steel Water Cooled Laser Heat Exchanger 22 x 15.5cm Dissipated Heat ~ 1250W Size of radiator: 22 x 15.5cm Came from a Laser system The lip of the item is stainless steel + Aluminum and the cooler is made of Copper Dissipated Heat: ~ 1250W at Δ =30 °C(similar to Thermatron heat exchanger model 732 http:www.mb-electronic.de/sites/default/files/files/de/kuehlung/pdf/thermatron_waermetauscher_120416.pdf) This Item Is For Sale As Is My Policies: Please note that most items are not Tested so the item condition is unknown and not guaranteed unless described otherwise. All items are for sale AS ARE! If for any reason you are not satisfied with your purchase please contact us immediately ... moreby Email or Phone. Before contacting eBay Resolution center/ Leaving Feedback! If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. SHIPPING Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. There is NO extra charge for packing materials or"handling" unless specified in the item description above. PLEASE NOTE: I reserve the right to refuse to ship items to"unconfirmed" PayPal addresses. We are shipping all items by Post Office's Air Mail/ EMS/ UPS- depends on weight. Buyer can choose his prefered way of shipping- but has to pay for it. We are responsible for any D.O.A. issues. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post offi
|
|
Concepts Industrial API HEAT TRANSFER PLATE HEAT EXCHANGER USED CONDITION MODEL: SX13-350-13 PART NO: 4-X13-GBN- 013-054 SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA THIS ITEM WILL SHIP FREIGHT ONLY. 225lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments. Unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. CE69. SW/225 RB 11/11/13. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing ... morespecial shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours!
|
|
HASTINGS HVAC NATURAL GAS DUCT FURNACES UNIT HEATER F250X F-250X*FOR PARTS* HASTINGS HVAC NATURAL GAS DUCT FURNACES UNIT HEATER F250X F-250X*FOR PARTS* REMOVED FROM A SHUT DOWN PHARMACEUTICAL PLANT. ITEMS IS UNTESTED AND SOLD' AS IS' PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. IF YOU FEEL THE SHIPPING COST FOR INTERNATIONAL LOCATION IS TOO MUCH. CONTACT US AND WE CAN CHECK IF WE CAN RE-SIZE THE BOX TO LOWER THE SHIPPING COST. DON'T LET SHIPPING COST MAKE YOUR DECISION. CONTACT US AND WE WILL WORK WITH YOU AS MUCH AS WE CAN! WE ALWAYS USE YOUR PAYPAL ADDRESS AND INFORMATION TERMS OF SALE Some items are offered“Used-As-Is” UNLESS IT’S NOTICED. ... moreThis does not mean that the item does not work; it just means that we have not run this item in production ourselves and we don’t have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US. Good relationship If there are any problems with your order. Please contact us. We will work with you to resolve any issue as quickly as possible. We want customer 100% satisfaction! Launched from my store- Powered by
|
|
This is a used Fanuc A02B-0094-C901 Heat Exchanger- A02B0094C901. Item is guaranteed not to be DOA for replacement or refund within 14 days of receiving. Item is sold as pictured. Note: the item you receive may not be the exact one pictured when multiple items are listed. Please ask any questions before your bid; be as specific as possible. Shipping We ship items once payment is received. We ship USPS Priority mail with delivery confirmation. USPS First Class mail and UPS Ground. Please note: we combine shipping. The cost of combined shipping depends on weight. Location of buyer and size of box. Large orders will require UPS shipping. If you purchase multiple auctions please wait to be invoiced before paying. International shipping: we will ship worldwide. Please remember your item must go ... morethrough customs which can delay receiving your item in a timely manner. We will not mark your item as a gift or pay any customs fees. Any and all extra fees incurred for international shipping are the responsibility of the buyer. All used items are sold as is and are non-returnable. So please be sure before purchasing the item. WE WILL NOT SHIP TO UNCONFIRMED ADDRESSES. WE WILL ONLY SHIP TO THE ADDRESS SPECIFIED ON YOUR PAYPAL ACCOUNT AS THE SHIP TO ADDRESS. THE ONLY EXCEPTION IS IF THE ADDRESS CHANGE IS IN THE SAME COUNTRY AND WE ARE PROVIDED WRITTEN CONFIRMATION OF THE NEW ADDRESS THROUGH EBAY. NO VERBAL CONFIRMATION WILL BE ACCEPTED; THIS MUST BE IN WRITING. Michigan State Sales Tax All Michigan customers are subject to Michigan State Sales tax of(6.0% regardless if the item is shipped or picked up. Return Policy We offer a 14 day money back guarantee if you receive an item that does not match our auction description and you contact us within 7 days from the closing date of the auction(excluding parts only non-working items. If you receive an item that you are not happy with we will refund the auction less shipping and a 10% restocking fee. Please note. When we sell used merchandise it will be listed in auction as“
|
|
This is a usedHoffman XR-2016-101H Heat Exchanger. Unit have been cleaned and tested. Item is guaranteed not to be DOA for replacement or refund within 14 days of receiving. Item is sold as pictured. Note: the item you receive may not be the exact one pictured when multiple items are listed. Please ask any questions before your bid; be as specific as possible. Shipping We ship items once payment is received. We ship USPS Priority mail with delivery confirmation. USPS First Class mail and UPS Ground. Please note: we combine shipping. The cost of combined shipping depends on weight. Location of buyer and size of box. Large orders will require UPS shipping. If you purchase multiple auctions please wait to be invoiced before paying. International shipping: we will ship worldwide. Please remember ... moreyour item must go through customs which can delay receiving your item in a timely manner. We will not mark your item as a gift or pay any customs fees. Any and all extra fees incurred for international shipping are the responsibility of the buyer. All used items are sold as is and are non-returnable. So please be sure before purchasing the item. WE WILL NOT SHIP TO UNCONFIRMED ADDRESSES. WE WILL ONLY SHIP TO THE ADDRESS SPECIFIED ON YOUR PAYPAL ACCOUNT AS THE SHIP TO ADDRESS. THE ONLY EXCEPTION IS IF THE ADDRESS CHANGE IS IN THE SAME COUNTRY AND WE ARE PROVIDED WRITTEN CONFIRMATION OF THE NEW ADDRESS THROUGH EBAY. NO VERBAL CONFIRMATION WILL BE ACCEPTED; THIS MUST BE IN WRITING. Michigan State Sales Tax All Michigan customers are subject to Michigan State Sales tax of(6.0% regardless if the item is shipped or picked up. Return Policy We offer a 14 day money back guarantee if you receive an item that does not match our auction description and you contact us within 7 days from the closing date of the auction(excluding parts only non-working items. If you receive an item that you are not happy with we will refund the auction less shipping and a 10% restocking fee. Please note. When we sell used merchandise it will be list
|
|
|
YOUNG MODEL F303-HY2P BRASS/ COOPER SHELL& TUBE HEAT EXCHANGER 150 PSI SHELL& TUBE 350 F MAX PART# 307698 31" LONG OVERALL 1" NPT PORTS ON ALL SIDES SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS LOCATED ON TOP OF SV-3 VINCE
|
|
Thermal Transfer Products 150 PSI 350 degree Heat Exchanger 16x9x2-1/4" 4 Pass SPECIFICATION Bullseye Catalog# 40591 Brand: Thermal Transfer Products, Model: RM-2S, Aluminum tubes and fins, SAE#8 Port sizes, 7" diameter hole to mount behind a TEFC motor, Weight: 8 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please ... morelet us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you ar
|
|
Young Radiator F-301-HY-2P Heat Exchanger 350F Degrees Max Operating Temp. 1" NPT Young Radiator F-301-HY-2P Heat Exchanger 350 Degrees F Max Operating Temp 1" NPT 150 psi Max Used. Came off of working equipment Email or call 920-684-9999 w/questions PLEASE READ PRIOR TO BIDDING You are buying the above as is(If you are not sure what that means. Look it up AS IS) This means don't assume anything. If you have a question, ask. If it is not listed as NEW, then don't assume that it is.It is sold as seen, as is. Unless an item specifically states that it has been tested, it has not been tested. If you would like an item to be tested and can tell us how to do so, please call/ email us and we will make every attempt to do so. However, please understand that our business is rigging ... moreand we are not electrical engineers. Most items were removed from working machines but are still sold AS IS.Feedback will only be left if you leave positive feedback. EBAY has removed the sellers right to post anything other than positive feedback and we feel that positive feedback should be mutually reciprocated. Lastly, if you try to threaten use of negative feedback to get something that was not listed or a service that was not listed, we will forward the request to EBAY without notice. BB13 S6
|
|
YOU ARE BUYING ONE LOT OF 4 NIEC PDT1508 THRYSTOR DIODE MODULES ON SD150T8K80U146 HEAT EXCHANGER. HIS UNIT WAS REMOVED FROM A VERTRON VERTICAL LOW PRESSURE CVD SYSTEM 200MM DIFFUSION FURNACE. WHICH WAS WORKING WHEN REMOVED FROM SERVICE, AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G1SSR1) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such ... morebehavior. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Therma-Stor refrigerant heat recovery system. Model# TS-II-120-1. Part# 4020188. Can be used w/ potable water.
|
|
THERMAL TRANSFER PRODUCTS 300 PSI 350°F HEAT EXCHANGER. AOC-08-41 THERMAL TRANSFER PRODUCTS HEAT EXCHANGER USED CONDITION AOC-08-41 300 PSI. 350°F ITEM SHOWN IS A REPRESENTATIVE UNIT, CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 68. KF SW 9 11/20/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. ... morePlease read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours!
|
|
|
Nice clean shell and tube heat exchanger for hot water application.No leaks and is clean. 27' Long and used for hot tubs and commercial and high hot water applications. 315-549-7664 Jason.
|
|
Concepts Industrial API BASCO HX-1805 183/FV PSI 250F HEAT EXCHANGER USED CONDITION. APPROX. 52" LONG. P/N 1445-04-036-006 SIZE 04036 SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. THIS ITEM WILL SHIP FREIGHT ONLY. 142lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALLSHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments. Unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. SW/142 DS 11/19/13. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. ... moreIf needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Nov-19-13 at 10:12:38 PST. Seller added the following information:
|
|
Concepts Industrial API BASCO HX-1803 183/FVPSI 250F SIZE 04018 HEAT EXCHANGER USED CONDITION. APPROX. 32" LONG. P/N 1445-04-018-000 SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. THIS ITEM WILL SHIP FREIGHT ONLY. 118lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALLSHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments. Unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. B20. SW/118 DS 11/19/13. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when ... moreapplicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Nov-19-13 at 10:12:42 PST. Seller added the following information:
|
|
Concepts Industrial NORTHERN DESIGNS SERVICES INC. 35IN HEAT EXCHANGER USED CONDITION. TK013 SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. B26. SW/63 DS 11/19/13. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we ... moreno returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14356b3ecf8-0xf9-
|
|
ITT STANDARD HEAT EXCHANGER BCF P/N 5-030-08-060-006 SHELL MAX WP: 300 PSI SHELL MAX TEMP: 300 DEG F TUBE MAX WP: 150 PSI TUBE MAX TEMP: 300 DEG F APPROX 60" OVERALL LENGTH*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charges ... moreto shipping. Approximate weight: 200 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities RAB/ 7678/SURPLUS/ 1) E
|
|
|
THERMAL TRANSFER PRODUCTS MODEL 4F356 300 PSI 350DEG F HEAT EXCHANGER USED. SKU: HVACS1402YV025-1613-FS-HOST1. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Sale is for One(1) NEW OUT OF BOX DAYTON 1HKL8 24" GUARD MOUNT EXHAUST FAN BLOWER 115 VOLT 3840 CFM This is new out of box This has light scratches from out of box storage This is missing the wire way cover it does not affect operation This will run on 115 volt Single phase current only Motor specs are; Item Exhaust Fan, Type Guard Mounted, Propeller Dia. In. 24, CFM@ 0.000-In. SP 3840, CFM@ 0.125-In. SP 2690, Sones@ 0.000-In. SP@ 5 Ft. 10.8, Voltage 115, Hz 60, Phase 1, Operating Amps 3.6, Motor HP 1/3, Max. Ambient Temp. F) 104, Bearing Type Sleeve, Motor RPM 1075, Motor Type Shaded Pole, Motor Enclosure Totally Enclosed Air-Over, Motor Insulation Class A, Max. Depth(In. 10-3/16, Mounting Position Horizontal or Vertical, Mounting Holes O.C. In. 19-5/8, Guard Material Steel, Wire Guard ... moreFinish Gray Polyester, Outside Dia. In. 26-7/8, Propeller Material Stamped Aluminum, Number of Blades 3, Includes Wiring. Junction Box, and 7" Leads, Agency Compliance UL Listed for US and Canada, Location- B-3-0 We Combine Shipping Thanks Kurt
|
|
ALUMINUM HEAT EXCHANGER INDUSTRIAL FLUID N2/ O2/ Ar 600 PSIG UNIT STANDS AT 109" TALL BASE OF UNIT STANDS AT 88" TALL LEGS STAND AT 21" HIGH MANUFACTURER: CRYOGENIC EXPERTS INC. MODEL: 4A4 WITH HOSE VALVE FLUID: N2/02/AR FLOW: 2000 SCFH-LBS/HR TUBE PRESSURE: 600 PSIG SERIAL NUMBER: 120730 TUBES: 4. 2 CONNECTED TO EACH OTHER PLEASE NOTE THAT THIS UNIT HAS SOME DAMAGE TO OUTSIDE DUE TO. BUT IT HAS NOT PUNCTURED THE TUBBING. A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. UNIT APPEARS IN GOOD WORKING CONDITION Buyer is responsible for cost and arrangement of flatbed shipping. We do not charge for loading. Unit can only be shipped via flatbed. For freight inquiry we recommend Tony Sidoti at FreightQuote You can reach him at ... more1800-323-5441 Ext 1383. We charge a $50 palletizing fee to steelband the unit onto a pallet. if applicable) You can either supply him the ebay listing ID. Or you can use the shipping information below to better help you. Shipping Dimension: APPROXIMATE DIMENSION: 24"W x 32"L x 109"T APPROXIMATE WEIGHT: 200 LBS We do not charge for loading. Comes as shown in photos PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. Please be sure to check out out other listings on Ebay. Item will immediately be re-listed if payment is not received within 5 working days. Please contact seller if for any reason payment cannot be made on time. Check out the photos provided. Thank you for looking and Good Luck! Sales Tax: Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via freight. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from our location. PAYMENT: Payment is due within 5 working days from end of auction. SHIPPING: Please refer to the shipping instructions on the auction page. TERMS OF SALE: All items are surplus and are sold in an as is condition. We do our best to be as clear and accurate in
|
|
|
TRIPLE S W 285R Water to Water Shell and Tube Heat Exchanger Water to water heat exchanger mounted on frame. Previously used in conjunction with casewasher. 42.4 square feet of heating surface. National board#752. Maximum water pressure 150 psi. SMB ID: 7249 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
FES 8WP-A11 Ammonia Chiller Welded Pair Plate Heat Exchanger manufactured by FES Systems Inc. Surface area/plate: 5.77 sq. ft. Maximum 3100 GPM. Top mounted surge drum. 8" connection size. Stainless steel control cabinet with product temperature and ammonia temperature monitoring displays. SMB ID: 9581 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ALFA-LAVAL MK15-BWFD 74 Plate& Frame Ammonia Chiller Ammonia plate and frame chiller used in association with Micro-Blend unit(Micro-Blend not included) MAWP- 250PSI AT 150F. MDMT-5F AT 250PSI. SMB ID: 9402 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ALFA a15-bwfd Chiller ALFA CHILLER L7'8'W2'8'H7'6' has a surgdrum made by REFRIGERATION VAVLE AND SYSTEMS serial no.40914 dims. L12' W6' H6' SMB ID: 9184 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14524f9a1a9-0x10f-
|
|
|
THERMAL TRANSFER PRODUCTS 300 PSI 400°F HEAT EXCHANGER. AOC-205-211478 The vents are bent(See photos) di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1453957068a-0x10c-
|
|
AKG HYDRAULIC HEAT TRANSFER EXCHANGER MODEL: AC16-3-AD MAX WKG. PR: 250 MAX WKG. TEMP: 250 HP: 50 KW: 37 3 PHASE VOLT 230/460 60 HZ VOLT 200/400 50 HZ AMP 1.6/0.8 60 HZ AMP 1.9/95 50 HZ RPM 3425 60 HZ RPM 2825 50 HZ 20" X 6" X 16" IEC METRIC MOTOR Condition: NEW. In box NEW. No box NEW. Old inventory X. USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: ITEM IS USED MAY HAVE LIGHT SCRATCHING SCUFFING ETC. DUE TO STORAGE AND USE. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase ... morethe item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE
|
|
|
RITTAL AIR WATER HEAT EXCHANGER MODEL No. 3217115 115 VOLT AC 50/60 Hz RATED CURRENT: 1.21.1 AMP NOMINAL REFRIGERATION: 88/83 WATT DIMENSIONS: 20-3/8" LONG X 12" WIDE X 5-1/2" DEEP SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS LOCATED BIG BLUE-51 SHELF-D JD
|
|
|
You are bidding on a used heat exchanger bundle. It has be cleaned and all tubes are clear and do not leak. Shipping is from Seattle. The cost of shipping will be determined by your location
|
|
|
You are bidding on one set of two Heat exchanger hoses. They are used but in good condition with no cracks. Shipping is from Seattle. Your destination will determine the cost.
|
|
STAINLESS STEEL HEAT EXCHANGER PLATES. HOLES VARY B Y PLATE. THE PLATES ARE 15 1/2" WIDE AND 45 1/4" LONG TERMS: Items listed under USED condition are not tested. Condition is not known and the item is being sold“ AS IS” unless stated otherwise. Condition of item will be noted in additional information. THE ITEM IN THE PICTURE MAY NOT BE THE EXACT ITEM SHIPPED. THE ITEM SHIPPED WILL BE THE SAME MODEL BUT MAY HAVE MINOR CHANGES IN APPEARANCE TURNAROUND TIME: Same day shipping is available on purchases made before 1:00PM EST Monday- Friday. Excluding holidays. Rush shipping will be available with additional fees. Please contact for more information. For pickup arrangements please also contact. Items left beyond 30 days will be marked abandoned and customer looses the rights to the ... moreitem or items. No exceptions. SHIPPING: For all Domestic shipping we will use UPS Ground. UPS First Class, or USPS Priority Mail at our digression. Larger items will require Freight shipping due to size and weight restrictions. Next day and 2 day shipping is available for additional fees. Shipping quotes do not include International Taxes or Duties; buyer will be responsible for any Import Tax and Customs Fees. For all International purchases buyer is responsible for all shipping costs. Taxes, and related fees. For all Freight shipments. The buyer is responsible for arranging pickup with the carrier of their choice. Pickup address, weight and dimensions will be provided upon request by PR39 Industries, PAYMENT: Payment must be received within 7 days of purchase or upon receiving invoice if requested. Payments not received in7 days items will be forfeited. For purchases requiring Freight Shipping. Charges must be received within 4 days. We only accept payment through PAYPAL. RETURN: Unwanted or broken items will not be covered; damaged or broken items due to shipping will be the responsibility of the carrier. Customer is responsible for return shipping. Unless product is shipped due to error we will refund in full as well as cove
|
|
CORRUGATED STAINLESS STEEL HEAT EXCHANGER PLATES. HOLES VARY BY PLATE. THE PLATES ARE 16 1/2" WIDE AND 61 1/2" LONG TERMS: Items listed under USED condition are not tested. Condition is not known and the item is being sold“ AS IS” unless stated otherwise. Condition of item will be noted in additional information. THE ITEM IN THE PICTURE MAY NOT BE THE EXACT ITEM SHIPPED. THE ITEM SHIPPED WILL BE THE SAME MODEL BUT MAY HAVE MINOR CHANGES IN APPEARANCE TURNAROUND TIME: Same day shipping is available on purchases made before 1:00PM EST Monday- Friday. Excluding holidays. Rush shipping will be available with additional fees. Please contact for more information. For pickup arrangements please also contact. Items left beyond 30 days will be marked abandoned and customer looses the rights ... moreto the item or items. No exceptions. SHIPPING: For all Domestic shipping we will use UPS Ground. UPS First Class, or USPS Priority Mail at our digression. Larger items will require Freight shipping due to size and weight restrictions. Next day and 2 day shipping is available for additional fees. Shipping quotes do not include International Taxes or Duties; buyer will be responsible for any Import Tax and Customs Fees. For all International purchases buyer is responsible for all shipping costs. Taxes, and related fees. For all Freight shipments. The buyer is responsible for arranging pickup with the carrier of their choice. Pickup address, weight and dimensions will be provided upon request by PR39 Industries, PAYMENT: Payment must be received within 7 days of purchase or upon receiving invoice if requested. Payments not received in7 days items will be forfeited. For purchases requiring Freight Shipping. Charges must be received within 4 days. We only accept payment through PAYPAL. RETURN: Unwanted or broken items will not be covered; damaged or broken items due to shipping will be the responsibility of the carrier. Customer is responsible for return shipping. Unless product is shipped due to error we will refund in full as we
|
|
Concepts Industrial THERMAL TRANSFER PRODUCTS 82" WATER COOLED HEAT EXCHANGER SBF-1608-D4-F GUARANTEED NOT DOA THIS ITEM WILL SHIP FREIGHT ONLY. 340lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. CE12. SW/340 RB 4/9/14. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding ... moreon the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Apr-09-14 at 07:15:14 PDT. Seller added the following information:
|
|
|
TRANTER MAXCHANGER 316LSS MINI WELDED HEAT EXCHANGERS PLEASE VIEW THE LINK BELOW FOR MORE INFORMATION
|
|
|
Standard Xchange Heat exchanger Xylem Brand Model BCF P/N STNV4 S/N503003014005 SHELL: Max W.P. 300 psi Max temp 300*F Tube; Max W.P. 300psi Max Temp 300*F This is a fully functional unit Thank you! NOTE: Free shipping to the contiguous USA only! If a return is issued buyer must pay return shipping. If item is returned in altered state(parts missing. Wrong packaging, broken, not working, wrong item and or used) NO REFUND WILL BE GIVEN. lower 48 States)
|
|
New Life Electronics NLESURPLUS New Page 1 ITT STANDARD HEAT EXCHANGE DESCRIPTION THERE MAY BE COSMETIC WEAR ON THE CASE FROM NORMAL USAGE. SHELL- 300PSI TUBE- 150PSI MAX TEMP 300 DEGREE AUCTION INCLUDES HEAT EXCHANGER ONLY AUCTION DOES NOT INCLUDE MANUAL OR ANY OTHER ACCESSORIES ITEM ID: R0416 CONTACT US Store hours: Monday- Friday 8:30 AM TO 4:00 PM EST Closed: Saturday& Sunday. We are also closed on some holidays. Address: 15635 Hudson Ave. Spring Hill. FL 34610 PAYMENT We accept PayPal and eCheck payments. We also accept all major credit and debit cards. Please contact us at(727) 378-8551 to make credit/debit card payments. SHIPPING We ship all orders within 1-2 Business Days of cleared payment. Please contact us immediately to make any address changes or for special instructions. ... moreWARRANTY We offer a 30 Day Hassle Free Warranty SquareTrade © AP6.0 SquareTrade © squaretrade warranty v2.0 Analyzing"Smart Counters" only at inkFrog.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1457157ef68-0x109-
|
|
Concepts Industrial BASCO SIZE 08060 TYPE 500 STEEL SHELL COPPER TUBE HEAT EXCHANGER 2A05A08060. GUARANTEED NOT DOA. THIS ITEM WILL SHIP FREIGHT ONLY. 500lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. CE507. SW/500 RB 4/16/14. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ ... morebidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours!
|
|
Mueller Model AT20S/SB-20 71- Plate Accu-Therm Plate Heat Exchanger 316 Stainless Steel 4- New Spare Plates Included Excellent Condition 316 Stainless Steel Heat Exchanger- used for Pasteurization Process. Manufacture Date 11-04 100 PSI Dimensions: 21" W x 17" L x 38" H s/n: 104760 We purchased this equipment new. It is exceptionally clean and well maintained. We are selling a complete milk processing operation that we have recently removed from service. Everything is listed separately but if you are interested in the whole system for one price- please contact us. Inquiries are welcome! We accept Paypal By bidding on this item you agree to complete the transaction within 14 days. Item will be made available to the winning bidder after we receive funds. Bidder will be contacted ... morevia email soon after auction ends with payment instructions. You May Control Shipping Cost and Schedule Delivery The wining bidder/buyer can sellect their own freight carrier. Arrange and pay for shipping and handling charges. The following basic rules apply. Must give us notification one business day before pick-up and pick-up be arranged during our platform business hours(8:00 am to 4:15 pm) FOB is the seller's dock(Buyer takes responsibility for item once it leaves seller's dock. Many freight companies require items be crated for shipment. Please see" You Can Have Your Item Crated for Shipment" heading below. You May Get Help Most shipping and freight companies are happy to assist you with an estimate and are ready to step you through the process. Quotes are available from the following websites: freightquote.com. Uship.com, yellowfreight.com, gitrucking.com(You may choose another company) A freight calculator is provided below for estimates only You Can Have Your Item Crated for Shipment Many freight companies require that items be crated for safe shipment. If crating is required. Please allow 3 to 5 business days. We Can Arrange Freight Shipping For You For buyers who would like for us to arrange the fr
|
|
MUELLER HEAT EXCHANGER- MODEL# AT80B-20 Description MUELLER HEAT EXCHANGER- MODEL# AT80B-20 STAINLESS STEEL 1.085 SQFT MAX PSI: 150 MAX TEMPERATURE: 150 MODEL# AT80B-20 BUYER PAYS FREIGHT/ SHIPPING. SUBJECT TO PRIOR SALE. VEC REFERENCE NUMBER: 61645 Contact Information Valley Equipment Company. Inc. 3903 West Market Street Johnson City. TN 37604 Hours: Phone: Fax: Mon-Fri 8am- 5pm EST(423) 753-3541 or(800) 832-3541(423) 753-3589 Seller warrants that it is the true and lawful owner of the equipment. That the same is free from all encumberances, and that seller has a lawful right to sell same. SELLER MAKES NO REPRESENTATION OR WARRANTY THAT THE EQUIPMENT IS MERCHANTABLE OR THAT IT IS FIT FOR A PARTICULAR PURPOSE. Except as here stated all warranties, express or implied, are excluded. Seller ... moreshall not be liable to purchaser, or any other person, for an indirect or inconsequential damage arising out of sale or use of the equipment. Buyer has inspected the equipment, or waived such inspection, and is satisfied with the condition thereof. Buyer assumes all risk and agrees to indemnify and hold harmless the seller against all claims and liability arising out of any condition, property or use of the equipment whether or not the claims and liability are for negligence of seller.
|
|
This auction is for an AIC HEAT EXCHANGER MODEL B500X. This is from an estate cleanout and is used but in good working condition. Shows some typical signs of wear/use. this is an AIC site with some specifications B-Line Heat Exchangers Shell and Straight Tube Heat Exchanger B-Line heat exchangers are fabricated with the distinctive AIC helically corrugated tube design. Intended for use with high fluid flows and low temperature variances. These robust, compact units are ideal for many residential and industrial applications. Their complete stainless steel welded structure ensures product strength and high quality performance. Applications Pools. Spas, hot tubs, Transmission and engine coolers, Oil coolers, Boiler sample cooler, Waste water heat recovery, Standard Materials: Stainless steel ... more316L, Titanium, Maximum Working Pressure: Up to 190 PSI(1.3 MPa) Maximum Working Temperature: Up to 406 °F(208°C) Model Heat Transfer Area Connection Shell Connection Tubes m2 ft2 in in B 45 0.15 1.62 1" 3/4" B 70 0.25 2.64 1-1/2" 3/4" B 130 0.33 3.64 1-1/2" 3/4" B 180 0.44 4.70 1-1/2" 1" B 250 0.63 6.80 1-1/2" 1" B 300 0.84 9.00 1-1/2" 1" B 500 1.56 16.80 2" 1" B 1000 2.00 21.50 2" 2 A QUICK GOOGLE SEARCH OF AIC HEAT EXHANGERS- B- LINE WILL HELP YOU FIND MORE INFO ON THE MODEL/ITEM Please examine the pictures and feel free to ask questions.
|
|
|
This is an OptiTemp Liquid to Liquid heat exchanger with digital controls. 5kW/17000Btu/1.42tons cooling capacity It is in excellent working conditions. Shipping to USA only.
|
|
|
MODEL NUMBER SP-210K stainless steel. Excellent shape we ship to lower 48 states only
|
|
3 CELL REPLACEMENT TUBE HEAT EXCHANGER EXCELLENT CONDITION PHOTO IS ACTUAL ITEM FDG1E2B JMB WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international or freight shipments. Feel free to contact us if you are purchasing multiple items ... moreto see if your purchase qualifies for shipping discounts. PAYMENT Payment can be made with PayPal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any re-manufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 15:11:19 PDT. Seller added the following information:
|
|
|
1-Alfa-Laval SS plate exchanger Type P.31.3. Mfg BB1919, NB# 1621, U" stamp 206.7 sq, ft. surface area, design temp. 25 to 240 F, 100 PSI, 4" flange in and out
|
|
Concepts Industrial DOVER TRANTER SUPERCHANGER HEAT EXCHANGER UXP-005-L-6-UJ-16. GUARANTEED NOT DOA. THIS ITEM WILL SHIP FREIGHT ONLY. 190lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. CE55. SW/190 RB 5/8/14. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. ... moreDue to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On May-08-14 at 06:34:56 PDT. Seller added the following information:
|
|
|
This is an extremely lightly used single wall. Brazed plate heat exchanger that was bought for a solar hot water application. It ended up bring too small and was only in operation for a week. It has been sitting in my garage for 2 years and I have decided to just sell it. Spec sheet can be found by typing the model number in a google search. Thanks and good luck bidding!
|
|
Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest, WATLOW 16250711 Heating Element 240V 6493W. 4 1/2"W, 34 1/2"L, 10 3/4"Rise PAYMENT: Payment is due upon receipt of your invoice. We accept PayPal payments and all major Credit Cards during the checkout process. We do not collect credit card or personal information. COMBINED SHIPPING: We always adjust shipping costs for multiple items paid for and shipped within the same business day. Items or quantities requiring multiple packages may not receive a discounts on shipping. SHIPPING: We ship using UPS and the US Postal Service(USPS) We do allow customers to use their own UPS account for overnight or special shipping situations. A packaging fee may be applied ... moreto your invoice. It is your responsibility to provide a deliverable ship to address at the time of purchase. Most orders are shipped same day with the exception of freight. Overnight Shipments: We can accommodate most requests. It is recommended that you make your purchase and payment before 3 PM MST. We do not refund overnight shipping costs. A valid phone number is required. Overseas Shipments: We ship USPS Priority Mail International in most cases. Each country has its own unique weight and size restrictions when using USPS. IF your package is over the USPS limits for your country. We will quote you UPS costs. Delivery times vary per country, we do not guarantee delivery times or how long the host country holds a package in customs. we have seen shipments via USPS take as long as 6 weeks. We do not allow self shipping and carrier pickup on non freight packages; we can ship items using your UPS account through our system. We do not ship FedEx, DHL, or any other shipper except UPS and USPS. Overseas Freight: Some items may require a special certified crate be made prior to shipment. This cost will be added to any freight charges. Overseas shipping is quoted as a door to door service. The shipping price does not include taxes(V
|
|
Search our eBay Store! Titus VAV 4N-04 DESV Size 08 Single Duct Terminal Variable Air Ventilation SKU: JV-MAT-C-TITUSVAV4N04 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Titus VAV 4N-04 DESV Size 08 Single Duct Terminal Variable Air Ventilation Model: VAV 4N-04 Size 08· Unit is untested. Dimensions(L”xW”xH” 50*10.25*15.25 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the ... moreunit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT M
|
|
|
Coils came out of a working unit last fall. Approximate dimensions: 25.5 x 14. 28 x 10.
|
|
ALFA-LAVAL G6-SH Plate and Frame Sanitary Heat Exchanger Serial: 30103-38065 Year: 2001 Alfa Laval Chiller. Volume-79.5 Liters. Design Pressure- 19.7 bar Design Temp-10/140 Degree Celsius. Test Pressure(Gauge) 26.0 Bar 26.0 at. 2" Threaded SS Fittings. SMB ID: 9815 We can provide a freight quote or load onto your truck at our warehouse. Equipment Sales are As-Is. This item has not been tested. SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore Can't find what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited ... moreto: Motors Blowers Pumps Gearboxes Electrical Controls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 7am-5pm EST Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Here is 3 plates for Schmidt plate heat exchanger 7H 100 Model 45094 HX 10 Material: titanium Glued EPDM gasket. Plates in very good condition. One is front plate One is back plate One is not sure. one before last one. Might fit other exchangers.
|
|
|
USED ITEM IN GOOD CONDITION WITH COSMETIC WEAR FROM USE/STORAGE(SEE PICTURES) 1516.
|
|
These ITT Standard 568602010002 are used working surplus. Sold as a Lot of 3. The physical condition is fair and there are signs of previous use and handling. Part No: 568602010002 Model No: Brazepak BP 400-010 AMAT No: 3380-01015 Max Pressure: 435 PSI Max Temp: 450°F Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 14"x14"x8" 14 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, ... moredate or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 14 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the bes
|
|
Search our eBay Store! Titus VAV 4N-05 DESV Size 05 Single Duct Terminal Variable Air Ventilation SKU: JV-MAT-C-SIZE05TITUS Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Titus VAV 4N-05 DESV Size 05 Single Duct Terminal Variable Air Ventilation Model: VAV 4N-05 Size 05· Unit is untested. Dimensions(L”xW”xH” 50*8*15.25 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) ... morebeing sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MILPIT
|
|
574-825-4990 SKU: 49513 Kool Mor DB-22 Forced Air Oil Cooler Hydraulic 1/4 HP 440 V 3Ph 3/4" NPT Ports. Brand: Dunham Bush Condition: Used Model: Kool Mor DB-22 MPN: Kool Mor DB-22 PHD 3421-0471 Seal Kit NIB CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. ... moreIf purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combined shipping. If you are not satisfied with combined shipping cost contact us and we will cancel your order. FREIG
|
|
Search our eBay Store! Titus VAV 4N-01 DESV Size 10 Single Duct Terminal Variable Air Ventilation SKU: JV-MAT-C-VAV4N01DUCT Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Titus VAV 4N-01 DESV Size 10 Single Duct Terminal Variable Air Ventilation Model: VAV 4N-01 Size 10· Unit is untested. Dimensions(L”xW”xH” 50*12.5*15.25 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the ... moreunit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MIL
|
|
Used Young Radiator Company Heat Exchanger SSF-804-ER-2P 258666 Used Young Radiator Company Heat Exchanger Model No. SSF-804-ER-2P Part No. 258666 Max. Operating Shell Pressure: 300 PSI Max. Operating Tube Pressure: 150 PSI Max. Operating Temperature: 40 F Will Ship Freight from Harrison. OH 45030 30 Day Guarantee International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyers' responsibility. Please check with your country's customs office to determine what these additional charges will be prior to bidding or buying. Location- PRH GMSCTN ACR Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and normal ... moreparcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote please contact us at the number above. All products are professionally packaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is not received within 7 Days we must begin an Unpaid Item Dispute. All return policies details are covered in each listing. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-1469a330228-0x10c-
|
|
|
This is an OEM Trane heat exchanger. was in a commercial voyager III. less than a year old. heat exchanger was salvaged when RTU was being relocated in parking lot during roof repairs and copper thieves ripped apart the unit leaving the most valuable heat exchanger. MODEL# YCD360B4LJ0AEC1 PART# EXC01293 this part costs way over $4.500 from factory. parts needed when changing your bad heat exchanger is INS01719. Which is a gasket for the burner plate, as you see in the picture its still half way there. I believe its cost is around $100-$150. local pickup. May ship locally within 100 miles if price is right.
|
|
|
CIPRIANI HEAT EXCHANGER Model SE0020( 031A00SPV011) The Gasketed Plate Heat Exchanger transfers heat between two fluids. For use in residential, commercial. Industrial and healthcare applications. with excellent transfer coefficient.It has a reduced surface area, an ultra-slim profile, it takes up little space and is easy to install. Easy to maintain. Very low pinch-point temperatures are possible. It has high corrosion resistance. Low-capacity circuits. Plates can be added to meet changes in capacity demand. Please feel free to call with any questions 559*348*7994. MasterCard and Visa welcome. Model SE0020 + 031A00SPV011 For more Info. To buy new or add plates. Go to http:www.cipriani-phe.com/index.php
|
|
|
Cipriani Scambiatori heat exchangers# SE#0020+031A006SPV0JJ11 1.25 MNP fittings 13"x 8" x 5" these units are in pristine condition Questions call 5593651873 ask for Ron we accept Master Card and Visa company/ cashiers checks. Money orders as well as PayPal
|
|
|
This item was pulled from a working surplus of spare inventory. This item may have scratches. And abrasions from being stored without packaging.
|
|
Rugged. Reliable Taco Brazed Heat Exchangers represent the latest technology in high-performance heat exchangers. The Taco TFP Series is designed specifically for domestic hot water applications. In-floor radiant heating, snow-melt applications and as a general alternative to shell& tube type heat exchangers. These compact units feature copper brazed, stainless steel plates that offer a highly-efficient, low fouling transfer service. All units have male pipe thread fittings and mounting stud bolts are standard. This is a used working unit taken out of service during a system upgrade. Call Shawn at 603-336-5100 if you have any questions. TFP Specifications Plate Material: 316 Stainless Steel, Braze Material: Copper, Maximum Working Temperature: 350° F, Minimum Working Temperature: ... more425° F, Maximum Working Pressure: 450 PSI, Domestic water 50 F in- 140F out Connected to boiler 200F supply. 150F return BTUH 2.500,000 Side A Boiler GPM 93.2 Side B water heater GPM 50.7 Snow melt 100F in- 130F out connected to boiler 18F supply- 150f return BTUH 1.000,000 Side A Boiler GPM 68.6 Side B snow melt circuit GPM 72.2 Plates 70 Width 9.8" Length 20.3" Depth 6.9" Connections 2" MPT Approvals UL Listed. USA and Canada Standard ASME Certification(Optional) Canadian CRN European TÜV
|
|
Click to see supersized image Click to see supersized image Click to see supersized image Click to see supersized image Click to see supersized image Thermal Transfer Heat Exchanger Model: R-1014-79883 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Removed from 1991 Van Dorn 85-RS-5F-HT Shell 250 PSI Tubes 150 PSI Temp*F 350 Contact Us@ info@idealmachinery.com or feel free to call 248-627-3135 WARRANTY All purchased items include a 30 day warranty(from date of purchase) unless otherwise stated. This warranty does not include items sold"as parts" or"as is" It also does not include manuals or new factory sealed items. Item must be returned in the same condition as purchased. Additionally the security seals must not be tampered with or removed; DOING ... moreSO WILL VOID THIS WARRANTY! In the unlikely event that your purchase does not turn out as expected. Please contact us for an RMA number as well as return instructions. Restocking fee may apply. Please email me with any questions and thanks for looking! Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites Payment in full must be made prior to loading. We accept PayPal. Credit cards, bank wire transfers and business checks; NO PERSONAL CHECKS, Please! All local. County, state and federal taxes are the sole responsibility of the buyer and are not included in the purchase price. Items can be picked up at 10230 N. Holly Rd. Holly. Michigan 48442. Please be sure and call our office at 248-627-3135 to schedule a time if you are picking up your item. We will need a 24 hour notice if your items requires a pallet. We ship Monday through Friday. We are in the Eastern Standard Time zone. If a request for overnight shipping is made before 3:00 p.m. We can get it to you the next day. We try our best to get all packages out within 48 hours but most items will ship the next day. Please check our feedback; everyone raves about our quick shipping. We take our feedback very seriously. Feel free to contact us for
|
|
|
You are bidding on: Alfa Laval Brazed Plate Heat Exchanger 3287000622 CB27-50H T06 See actual picture. We have no means to test this type of equipment. from bankrupt company. Local buyers can inspect/pick up for free If any problems. Please contact me. Please Note the following: 1. No warranty 2. If you have any questions regarding this item. Please contact me_before_ bidding. S/H via shipping calculator. Expedited shipping can be arranged upon request. Other Notes of Interest Shipments: All items will ship within 1-2 business days of payment receipt.
|
|
Untested Unknown Varion Heat Exchanger Model HE-190 Varian Heat Exchanger HE-190 Lytron Part Number 5210 GA Radiator Dimensions 8-1/2" x 9-1/2" x 2-1/2" 115 Volt Cmair Rotron Feather Fan Mounted Directly To The Radiator Used Take A Moment And Visit Our Ebay Store Please Read Terms and Conditions USA Sales Only All auctions must be paid for with in 10 Days of end of auction. All items are SOLD AS-IS Unless otherwise stated in the auction. All end of auction notifications will be sent to your registered Ebay email address. We will combine shipping on auctions if possible. However we may not combine shipping on auctions sold by different CTR Surplus sellers. If for some reason an item has to be returned to CTR Surplus the Buyer will have to pay the return shipping. The original ... moreshipping charges are not refundable. All returns are subject to a 20 percent restocking fee. For any return you must email CTR Surplus with in 3 days of receipt of the item. Please ask all questions before placing a bid. Most items will be shipped UPS Ground and automatically insured for the bid amount. Any item that requires Truck Freight will require Buyers phone number and someone to unload the item from the truck(The Freight Company Will Not Unload The Truck) CTR Surplus 202 W. Livingston Ave Crestline Ohio 44827 Phone 419-683-3535 Fax 419-683-3230 All Auctions Will Be Automatically Insured For Final Bid Price Please click here to see my other auctions. 7.25% Sales Tax Will Be Charged On Item Price And Shipping On All Ohio Sales Powered by SixBit's eCommerce Solution
|
|
Used Young Quality Radiator Company Heat Exchanger SSF-604-ER-2P 115689 Used Young Radiator Company Heat Exchanger Model No. SSF-604-ER-2P Part No. 115689 Max. Operating Shell Pressure: 300 PSI Max. Operating Tube Pressure: 150 PSI Max. Operating Temperature: 40 F Will Ship Freight from Harrison. OH 45030 30 Day Guarantee International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyers' responsibility. Please check with your country's customs office to determine what these additional charges will be prior to bidding or buying. Location- PRH GMSCTN ACR Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and ... morenormal parcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote please contact us at the number above. All products are professionally packaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is not received within 7 Days we must begin an Unpaid Item Dispute. All return policies details are covered in each listing. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates
|
|
|
Sale is for One(1) USED EMERSON K55HXNFE-0903 1075 RPM 1/2 HP 115 VOLT FAN MOTOR 1 PH This has light scratches and a small ding on the rear cap shown in the photos All that's included is shown in the photos This comes as shown This will run on 115 volts Single Phase Current Only The one in the photos is the one you receive Spec's Are; MFG- Emerson HP- 1/2 Volts- 115 RPM- 1075 Phase- Single Model Number- K55HXNFE-0903 Frame- 48Y Weight- 16.6 Rating- Continuous Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 4469 1 Location- P-3-2 We Combine Shipping Thanks Kurt
|
|
|
Kooltronic Heat Exchanger KXHE120A 115V 1PH.8A 125 Degree Max Temp Condition: Used Loc: 22f3-10
|
|
|
Up for auction is used bell& gosset heat exchanger. Part# BY544200056900. Serial#158344-02. Manufactured in 2011. Side 1: MAWP 150 PSI at 257 F, MDMT +32 at 150 PSI. Side 2: MAWP 150 PSI at 257 F, MDMT +32 at 150 PSI. Unit has four 2" pipe fittings. Item is in used condition and came out of a plant that recently closed- it was in use up until removal. Item will have to ship freight. Buyer is responsible for arranging and paying for freight. I can put on a pallet and load for free. Please see pictures and email with questions.
|
|
AMERICAN INDUSTRIAL HEAT EXCHANGER MODEL: AB-702-A4-FP 1007 BRASS SHELL 300 PSI COPPER TUBES: 150 PSI TEMP. 300°F 1" NPT ON TOP INPUTS 3/4" NPT ON INPUTS ON END OF UNIT 4 1/2" APPROXIMATE SHELL DIAMETER 18" FLANGE TO FLANGE FOR MORE INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS. Condition: NEW. In box. NEW. No box. NEW. Old inventory. X. USED. But in good working condition. REMANUFACTURED. Unused since repairs. AS-IS. For parts or repair, no warranty no refunds. DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the ... moreseller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL
|
|
Taisei Kogyo FCF-226-1 Pressure 981 Kpa Heat Exchanger#16* US SELLER* Taisei Kogyo FCF-226-1 Pressure 981 Kpa Heat Exchanger#16* US SELLER* SOLD SEPARATELY. CALL US TODAY AND WE CAN ACCEPT YOUR MAJOR CREDIT CARDS DIRECTLY. NO NEED TO PURCHASE THROUGH PAYPAL. 336-245-9099 Please be sure to have the eBay item number and your credit card ready. Untested. But will Warrant! If you have a problem with your purchase. Please Contact us! DS BRIGHTWOOD 304-A-16 BUY WITH CONFIDENCE. WE WARRANT OUR ITEMS! See Warranties Link under"Terms of Sale" Still unsure about who to buy from.just view our feed back. Highly recommended! I returned part with no problems!jayb1735 AWSOME! Great price! Great Delivery Charges! Arrived Fast& Immaculate!jimjaxn fast and accurate.the way all of ebay should be.tbrico ... moreFast Shipping. Came as advertised. Thank You!anacandies Item as described- Great Ebayer- Highly Recommended- A+++.vandykemik Great Buy. As described.dynacomllc For Payment Details. Please click here. For freight shipments. Contact us for a quote. Please have ready the following: 1. Business name? 2. Complete shipping address? 3. Contact name and number? 4. Does this location have a loading dock? 5. Any other information? For all other shipping information. Please click here for our shipping details. If you would like to see more information on our warranty. Please click here. To learn more about us. Please click here. For Contact Information. Please click here.
|
|
Zander Aachen MSG-32 Limit Switch 250V 5A~#17* US SELLER* Zander Aachen MSG-32 Limit Switch 250V 5A~#17* US SELLER* SOLD SEPARATELY. CALL US TODAY AND WE CAN ACCEPT YOUR MAJOR CREDIT CARDS DIRECTLY. NO NEED TO PURCHASE THROUGH PAYPAL. 336-245-9099 Please be sure to have the eBay item number and your credit card ready. Untested. But will Warrant! If you have a problem with your purchase. Please Contact us! DS BRIGHTWOOD 307-E-Z-17 BUY WITH CONFIDENCE. WE WARRANT OUR ITEMS! See Warranties Link under"Terms of Sale" Still unsure about who to buy from.just view our feed back. Highly recommended! I returned part with no problems!jayb1735 AWSOME! Great price! Great Delivery Charges! Arrived Fast& Immaculate!jimjaxn fast and accurate.the way all of ebay should be.tbrico Fast Shipping. ... moreCame as advertised. Thank You!anacandies Item as described- Great Ebayer- Highly Recommended- A+++.vandykemik Great Buy. As described.dynacomllc For Payment Details. Please click here. For freight shipments. Contact us for a quote. Please have ready the following: 1. Business name? 2. Complete shipping address? 3. Contact name and number? 4. Does this location have a loading dock? 5. Any other information? For all other shipping information. Please click here for our shipping details. If you would like to see more information on our warranty. Please click here. To learn more about us. Please click here. For Contact Information. Please click here.
|
|
AMERICAN INDUSTRIES HEAT EXCHANGER CAT. UNKNOWN, BRASS SHELL, COPPER TUBE SHELL: 300 PSI, TUBES: 150 PSI TEMP. °F: 300 1 1/2" NPT 18 1/2" LENGTH BETWEEN FLANGES, 5 1/4" APPROXIMATE BARREL DIA. FOR MORE INFORMATION ON THIS ITEM PLEASE SEE THE ABOVE PHOTOS. Condition: NEW. In box. NEW. No box NEW. Old inventory. X USED. But in good working condition. USED. REBUILT UNUSED SINCE USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of ... morethe end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly acc
|
|
SS Sanitary Tube& Shell Heat Exchanger 78" Length X 8" diameter Stainless steel tube and shell heat exchanger. Has 2" and 4" ports for shell side and 2" inlet/outlet for tube side. SMB ID: 10758 We can provide a freight quote or load onto your truck at our warehouse. Equipment Sales are As-Is. This item has not been tested. SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore Can't find what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited to: Motors Blowers Pumps Gearboxes Electrical ... moreControls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 7am-5pm EST Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
CHESTER JENSEN 45 HMF Plate and Frame Heat Exchanger Serial: 12984305 Year: 1999 Heat transfer surface per plate is 3.73 sq. ft. Plate gauge is 20. Heady-duty designed frames. Plates surfaces can be cleaned and sanitized. SMB ID: 10763 We can provide a freight quote or load onto your truck at our warehouse. Equipment Sales are As-Is. This item has not been tested. SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore Can't find what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited to: Motors Blowers Pumps Gearboxes ... moreElectrical Controls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 7am-5pm EST Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
THIS HEAT EXCHANGER WAS BOUGHT AS A SPARE FOR A COMMERCIAL HEATING UNIT. THE HEAT EXCHANGER WAS INSTALLED JUST TO CHECK FOR COMPATIBILITY WITH THE COMMERCIAL HEATING UNIT. IT WAS INSTALLED FOR ABOUT 1 HOUR. THE HEAT EXCHANGER WAS THEN PUT AWAY FOR STORAGE. THE OLD COMMERCIAL HEATING UNIT WAS REPLACED WITH A NEW AND BIGGER ONE. YOU HAVE A GREAT DEAL HERE. OUR LOSS IS YOUR GAIN. PLEASE REFER TO THE PICTURES FOR FURTHER DETAILS. SHIPPING IS FREE IN THE CONTINENTAL USA; SHIPPING FEE TO OTHER LOCATIONS WILL BE ADJUSTED ACCORDINGLY. WE ACCEPT PAYPAL ONLY. `.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3A%60%3E-146a5f50be5-0x104-
|
|
|
Ingersoll-Rand Coolers: Size 06060: Serial#5015307-101: Date 4-01- P& K Equipment. Inc. fax: 216-831-7779 Ingersoll-Rand Coolers: Size 06060: Serial#5015307-101: Date 4-01
|
|
|
EN-449 Heat exchanger Please see pictures for more info Please feel free to ask any questions Unit comes with 30 day warranty and free shipping to lower 48 We add new items weekly to our store so check back often Unit may be seen or picked up at Holland Equipment Recovery Sales 3345 60th St Hamilton MI. 49419 Will ship worldwide for additional fee
|
|
|
USED APPROX SHIPPING WEIGHT: 950 LBS. AJ. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EN-450 Heat exchanger Please see pictures for more info Please feel free to ask any questions Unit comes with 30 day warranty and free shipping to lower 48 We add new items weekly to our store so check back often Unit may be seen or picked up at Holland Equipment Recovery Sales 3345 60th St Hamilton MI. 49419 Will ship worldwide for additional fee
|
|
|
C11600 Young Model F-502-HY4P- Part No. 307107 Heat Exchanger. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146aa196d7f-0x10d-
|
|
|
You Are Bidding On A Baltimore Aircoil Enerchanger Heat Exchange Stainless Steel Plate and Frame Model: EC5-087-2 S/N: 87100982 Max Allow Press: 100 psig Max Allow Temp: 200 F Plate Pack Width: 11.38" Min Plate Pack Width: 12.24" Max Surface Area: 343.1 Sq Ft Happy Bidding!
|
|
DESCRIPTION Southern Heat Exchanger Corp. Manufacturer: Southern Heat Exchanger Corp. Model: Year: 1986 Condition: Used Specifications: Shell Side MADP 100 PSI AT 250 F MADT 250 F at 100 PSI Tube Side MADP 100 PSI AT 250 F MADT 250 F AT 100 PSI SHE ORDER 86-305 National BD Number 4811 Inlet 6" and 4" Dimensions 150" Long and 20" Diameter Carbon Steel Tubes Carbon Shell U-tube For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing ... moreFee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnor@essindustrial.com. Mac DB: 5645-1503-LR
|
|
LARGE PIPE CLAMP HEATER 5" DIAMETER 8" LONG 115 VOLTS TESTED Up for bid is a LARGE PIPE CLAMP HEATER. It measures about 5" DIAMETER and 8" LONG. It operates on 115 VOLTS and is TESTED. We are able to apply 115 volts and feel the clamp heat up rapidly. There is near 6 feet of connection wire attached. There is a manufacturer label attached. But is unreadable. Warranted NO DOA. USPS PRIORITY MAIL My Policies: TERMS PAYMENT DUE WITHIN 8 DAYS OF AUCTION CLOSE PA RESIDENTS MUST PAY SALES TAX We take Pay-Pal payments& other forms of ebay approved& NON APPROVED payments. We do not take credit cards directly- only thru PayPal. We only ship by UPS. USPS or TRUCK& have UPS daily pickup. Payment received by Noon will usually ship(UPS or USPS) same day- otherwise next business ... moreday. Truck shipments will ship within 2-3 business days. You are buying only what is shown in the pictures unless otherwise stated in the description! Any currency or coins shown in pictures are for size reference only and are not included in the auction. UPS/ TRUCK SHIPPING INSTRUCTIONS Any above shipping instructions(like truck shipping) take precedence over these UPS instructions Buyer pays shipping costs as shown by the eBay shipping calculator Shipping will be by UPS or USPS ONLY unless truck shipping applies-Cost can be checked by entering your zip code in the eBay shipping calculator-If calculator will not work for your zip or the item is truck ship only then it is the buyers responsibility to contact me for a shipping quote before bidding! ABSOLUTELY NO FEDX- NO COD OR SHIPPING ON ANOTHERS ACCOUNT# If you are a Canada buyer or the item is truck ship We MUST have your phone# for the shipping paper work before We can ship. We use a SEALED AIR FOAM PACK SYSTEM& pack most larger items in expanding foam packing to insure undamaged shipping. CANADA BUYERS Due to MANY-MANY problems with Canada buyers not being aware of customs duties and UPS broker fees + other costs we currently will not allow you to bid unless you
|
|
ITT Plate& Frame Heat Exchanger Part Number: BY543200037100 Plate Dimensions: 59-1/2" H X 19-1/2" W 257ºF 150 PSI 350 Plates Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due ... morewithin 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay on
|
|
|