In 
Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
236.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Better Results than Standard Stump Grinder Teeth. High Resistance to Wear and Abrasion. We will provide you with the high quality service.
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Leland, United States
These apron style pants create 6 layer protection designed for rough daily logging. ✅ not for use with electric chainsaw.
$
156.99
Buy It Now
Free Shipping
Condition: New
Location: Lithia Springs, United States
Skiding tongs - easy for pulling, dragging, and skidding logs a breeze. As pressure is applied the end points will dig into the log for a strong, secure grip. - HIGHLY VISIBLE: Red coating makes these tongs easy to see on the job site.
$
58.99
0 bids
Free Shipping
Condition: New
Location: Perth Amboy, United States
VEVOR Steel Core Lanyard Kit Safety Flipline 1/2"x8' Swivel Snap Arborist Orange. VEVOR Safety Climbing Harness Fall Protection Equip Climbing Rappelling Gear. VEVOR Vertical Lifeline Assembly Fall Protection Rope 100 ft Polyester 310 lbs.
$
65.99
Buy It Now
Free Shipping
Condition: New
Location: Lorain, United States
Skidding Tongs with Ring Red 25 Inch Steel Log Lifting Dragging Log Tongs.
$
65.90
Buy It Now
Free Shipping
Condition: New
Location: New Castle, United States
This planking milling guide bar is an excellent tool for you to cut planks in regular size. Very suitable for builders, woodworkers and outdoor enthusiasts. 1 PC Chainsaw Mill. Attaches directly to your chainsaw bar.
$
68.95
0 bids
Free Shipping
Condition: New
Location: Stanton, United States
Rope Size: 1/2". Anodized to BS EN 7599:2010 AA10.
$
139.99
Buy It Now
$7.00 Shipping
Condition: New
Location: Rogers, United States
Item #: OPG77769. Fits DK2 Stump Grinder Model# OPG777 & PowerKing Stump Grinder Model# PK0803. COMPLETE SET OF CUTTER TEETH - High speed cutting Teeth. Fits DK2 Stump Grinder Model# OPG777 & Power King Stump Grinder Model# PK0803.
$
109.50
Buy It Now
$7.00 Shipping
Condition: New
Location: Rogers, United States
Greenteeth® are concaved and work best in rocky soils. The 900 LoPro series is designed to be used for machines with35-90 horsepower. 900 Series WS Greenteeth. ® Stump Grinder Teeth. • Cost Effective - Three cutter teeth in one.
$
4.50
Buy It Now
$10.00 Shipping
Condition: New
Location: Clinton Township, United States
Specify center ,45 right,or 45 left. BOBCAT STYLE,500 SERIES. if your looking for larger qty.
$
79.00
Buy It Now
Free Shipping
Condition: New
Location: Elwood, United States
Mounts directly to the following John Deere loaders New Holland loaders, the 240TL, 250TL, 260TL and 270TL.
$
59.70
Buy It Now
$7.00 Shipping
Condition: New
Location: Rogers, United States
900 Series Straight Pockets: There are two different pockets for the 900 Series: Angle and Straight Each pocket is designed with a threaded hole and a counter-bored hole to allow each pocket to fit on either side of the wheel.
$
10.95
Buy It Now
$9.50 Shipping
Condition: New
Location: Barron, United States
This is a set of 25 bags only and does not include the holders, as shown in the first 2 photos. I have those in photos so you can see the bags better in use. You will get 25 of the bags that are in the photos.
$
166.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Binghamton, United States
Manufacturer part number: 806040406020. PRODUCTS MANUFACTURED IN THE USA. Like our products??.
$
69.50
Buy It Now
Free Shipping
Condition: New
Location: New Castle, United States
This planking milling guide bar is an excellent tool for you to cut planks in regular size. Very suitable for builders, woodworkers and outdoor enthusiasts. 1 PC Chainsaw Mill. (chainsaw and guide bar are not included).
$
400.00
0 bids
Free Shipping
Condition: New – Open box
Location: San Bernardino, United States
Notch Gecko Aluminum 2.0 Climbers (Tree Gaffs) (New Generation Climbers) German engineers designed Gecko gaffs to fulfill the comfort needs of modern tree and utility climbing personnel without all the weight and mass associated with traditional-style spurs.
$
309.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Mount Pleasant, United States
$
140.00
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
New design is 25% lighter.
$
31.11
0 bids
Free Shipping
Condition: New
Location: , United States
Suitable for a wide range of usage. You can use it with peace of mind, knowing that the tongs won't bend or break under heavy loads. Sharp Claw Hooks: The logging skidding tongs with a powerful eagle claw design is specifically used for securely gripping and holding logs during transport.
$
15.00
0 bids
Free Shipping
Condition: New
Location: Binghamton, United States
Chainsaw Lanyard P/N 25Y12-50A. PRODUCTS MANUFACTURED IN THE USA. Like our products??.
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Vienna, United States
LS Lock Nut fits the following models MT230E, MT230HE, MT235E, MT235HE and other various models. XR4040, XR4040H, XR4046, XR4046H and other various models. XU5055, XU5065.
$
38.00
Buy It Now
Free Shipping
Condition: New
Location: Hollidaysburg, United States
These are single bevel wedges to weld onto a log splitter wedge to split the log into four pieces. they have a single bevel so the log does not jam against the bottom rail of the splitter.
$
69.50
Buy It Now
Free Shipping
Condition: New
Location: Hayward, United States
This chainsaw mill will convert your chainsaw into a portable mill/slabbing machine! This tool has a parallel bar that can have it's distance adjusted from the chainsaw bar to provide different thickness slabs.
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
250LB AVERAGE BREAKING STRENGTH. 1/8" X 200FT ALL GEAR TARGET THROW LINE ROPE.
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Fort Lauderdale, United States
Varomorus Soil Probe Rod, Stainless Steel Soil Rod, Septic Tank Locator for Locating Underground Pipes, Gardening, Landscaping, T Handle. We designed this steel soil rod to provide you with a quick, convenient and simple way to probe the soil without straining your hands.
$
149.99
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
The advent of throwlines has changed the way arborists climb trees. The BIG SHOT is an accurate and lightweight launching system. The launch pouch cuts in-air projectile rotation by 50% over the original BIG SHOT pouch.
$
27.50
0 bids
Free Shipping
Condition: New
Location: Dayton, United States
Specification Material: Polyester Diameter: 12 mm Length: 31M/102ft Breaking Strength: 8400 lbs Working Strength: 1680 lbs   Package: 1 x 31M Double Braid Polyster Rope.
$
7.00
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
$
23.99
Buy It Now
$4.99 Shipping
Condition: New
Location: Leland, United States
These angular points, or felling “dogs”, face the stump to lift the tree side and help guide the tree to fall in the opposite direction·. STRONGEST felling wedges on the market, it is made of "High Impact ABS" with Orange Color that made for high impact.
$
61.40
0 bids
Free Shipping
Condition: New
Location: Ontario, United States
- The listing is about detachable pole pruning saw, consists of 8 epoxy resin pole and a alloy steel saw blade, features 8m overall length. - Light weight, Light weight, good insulation performance, high strength and strong bearing capacity. Includes sturdy canvas storage bag, features detachable design, the pole pruning saw is portable and convenient to store and transport. - Simply install this Sellery Aluminum Telescopic Rod into the Pruner head to converts it to a pole saw for pruning high and hard to reach branches, even allow you pruning tall trees, trim overhead without a ladder or at ground level without bending or kneeling. Now pruning your own tree has become more safety and easy than before.
$
76.26
0 bids
Free Shipping
Condition: New
Location: Monroe Township, United States
    3/4" x 150' double braid arborist bull rope     16,000 lbs. breaking strength. High tenacity polyester     Durable, abrasion resistant, UV resistant     Knots well, flexible, easy to use     Utility, rigging, hoisting, tree work     White with blue and gray tracers     Fast Shipping  .
$
140.68
0 bids
Free Shipping
Condition: New
Location: Hebron, United States
Better Results than Standard Stump Grinder Teeth. 20 × Stump Grinder Teeth. High Resistance to Wear and Abrasion.
$
3.99
Buy It Now
Free Shipping
Condition: New
Location: Glendale, United States
5" wide Set of 2 stickers Adhesive Vinyl.
$
119.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Better Results than Standard Stump Grinder Teeth. High Resistance to Wear and Abrasion. We will provide you with the high quality service.
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Eugene, United States
2 Serrated Claw Hook,Log Lifting Tongs,Heavy Duty Grapple Timber Claw,Lumber Skidding,Log Lifting -18in. 2 serrated claws can grip logs firmly.The tongs- crafted from high-quality steel- ensure long-lasting performance- making them ideal for lifting logs.
$
35.45
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
Rope Chainsaw Lanyard. These durable rope lanyards feature a ring at the loop end to hang your saw and keep it close to your body while in the tree. Constructed of durable round braided rope.
$
39.99
0 bids
Free Shipping
Condition: Used
Location: Sauk Centre, United States
We will do everything within our power to make the situation right.
$
49.45
Buy It Now
Free Shipping
Condition: New
Location: Woodstock, United States
Earth Worth skidding tongs are designed to be both functional and stylish. These tongs are ideal for every skidding and dragging operation. The tongs are a quick and easy way to skid logs. As pressure is applied the end points will dig into the log for a strong, secure grip.
$
34.99
0 bids
Free Shipping
Condition: New
Location: Anamosa, United States
Special hardened steel with treated surface makes it more robust and less sensitive to corrosion. Ability to pull or rotate timber with the hooks sharper ground edges. Ergonomically designed handle for improved grip.
$
38.99
0 bids
Free Shipping
Condition: New
Location: Chino, United States
1.This double braid polyester rope,which is ideal for various activities,such as climbing,caving,or other outdoor sports 2.Braided protection:solid braids are a type of braided rope that deliver high abrasion resistance and strength,with relatively low stretch 3.Waterproof surface:the surface of this polyester rope is waterproof material,which doesn't have storage requirements,and is suitable for long time exercise 4.Our rope solid braid has a smooth sheath that will not twist or unravel 5.The whole rope is made by poly.It's tough and strong,has 5500 lbs weight sustain ability for durable usage  .
$
27.07
Buy It Now
Free Shipping
Condition: New
Location: Santa Fe Springs, United States
Material : The Friction Saver is made of polyester and hot forged aluminum magnesium alloy, safe, durable, lightweight, wear resistance, and impact strength. The cambium saver strap wide webbing limits twisting : Strength: 24 KN, CE certificate.
$
279.00
Buy It Now
Free Shipping
Condition: New
Location: Rogers, United States
Greenteeth® are concaved and work best in rocky soils. The 1100 series is designed to be used for machines with more than 90hp. • Local pick up is allowed. Item #: 783558-1100WS.
$
26.90
Buy It Now
$8.80 Shipping
Condition: New
Location: Saint Croix Falls, United States
Manufacture : Gripple. Use : Wire Joiner & Tensioning. Made in : ENGLAND. Max Load : 880 LBS. Wire Gauge Size : Plain field electric wire 13.5 SWG - 10 SWG and high tensle barbed 15.5 swg. ARDEN SPECIALTY PRODUCTS.
$
21.99
0 bids
$3.99 Shipping
Condition: New
Location: Fair Oaks, United States
ROPE LOGICS YALE VERITAS EYE TO EYE PRUSIK 9mm 30IN ARBORIST CLIMBING RIGGING. New in package no returns
$
33.99
0 bids
Free Shipping
Condition: New
Location: Missouri Valley, United States
These gripples are used for wire joining and wire tensioning of fencing.
$
55.00
Buy It Now
Free Shipping
Condition: New
Location: Hot Springs National Park, United States
This is a New Notch Marvin 1.75" Pruner Head (w/bolt) PH5. New as pictured. Batch J22.1027.0167.
$
52.33
0 bids
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification:   Color:White with Blue and red Material:Polyester Diameter:1/2 inch, Length:150FT Package Includes: 1 x premium braided polyester rope   Features:  .
$
45.00
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
ALUMINUM ROPE GRAB W/ INTERNAL SPRING DESIGN. COMPATIBLE WITH STEEL CORE FLIPINES & ROPE LANYARDS. PART # 85528.
$
86.16
Buy It Now
Free Shipping
Condition: New
Location: Lititz, United States
We don't compromise on quality or performance, and neither should you. Ignition switch fits a number of Massey Ferguson tractor models. Product TypeAutomotive Ignition Starter Switches. High quality OEM part.
$
75.00
Buy It Now
Free Shipping
Condition: New
Location: Stillwater, United States
This kit includes 8" Tall 7" Dia throw line bag the bag is made of 1200-denier nylon and has multiple pockets also included is two rolls of throw line. One roll of 3/16th X 166' super slick throw line and one roll of proslick Dyneema coated 2.0mm 180' line.
$
120.99
0 bids
Free Shipping
Condition: New
Location: Perth Amboy, United States
It replaces manual labor, making your transportation and lifting work more efficient and flexible. Heavy-Duty Loading Weight: Made from thick #45 steel, our log skidding tongs can bear loads up to 3307 lbs.
$
41.76
Buy It Now
Free Shipping
Condition: New
Location: Mount Pleasant, United States
Filter kit RTV 2 (RTV1100 (S / N>=31003)). B2710HSD (Hydrostatic Transmission, 4wd) - 000600 OIL FILTER. B2910HSD (Hydrostatic Transmission, 4wd) - 000600 OIL FILTER. B3000HSDC - 000600 OIL FILTER. B3000HSDC (Hydrostatic Transmission, 4wd / Cabin) - 000600 OIL FILTER.
$
53.70
Buy It Now
$7.00 Shipping
Condition: New
Location: Rogers, United States
700 Series LoPro Straight Pockets : There are two different pockets for the 700 LoPro Series: Angle and Straight Each pocket is designed with a threaded hole and a counter-bored hole to allow each pocket to fit on either side of the wheel.
$
275.00
Buy It Now
Free Shipping
Condition: New
Location: San Bernardino, United States
Even weight distribution design and the adjustable neck piece allow for a perfect, secure and comfortable fit, even without the chin strap.
$
26.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Mount Pleasant, United States
$
6.99
Buy It Now
Free Shipping
Condition: New
Location: Saint Croix Falls, United States
MANUFACTURE: Gripple. MADE IN: ENGLAND. COLOR: BLUE.
$
139.00
Buy It Now
Free Shipping
Condition: New
Location: Rogers, United States
Greenteeth® are concaved and work best in rocky soils. The 500 LoPro series is designed to be used for machines withunder 18 horsepower. 500 Series Greenteeth. ® Stump Grinder Teeth. • Cost Effective - Three cutter teeth in one.
$
3.99
Buy It Now
Free Shipping
Condition: New
Location: Glendale, United States
$
269.55
Buy It Now
Free Shipping
Condition: New
Location: , China
Details about this arborist saddle. Best use: tree care,arborist,caving. Main parts: kernmantle rope,adjuster kit,swivel eye carabiner. details about this positioning lanyard. Rope type: braid kernmantle rope.
$
79.99
Buy It Now
Free Shipping
Condition: New
Location: Bel Air, United States
Arborist Rope - 1/2" x 150 ft., Blue / White / Red. Blue, White & Red 16 strand Arborist rope. Resistant to abrasion sunlight rot mildew and many common chemicals. 16 Strand braided Polyester jacket over parallel stranded Nylon core.
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
Ford Jubilee tractor. 5ft Ford finish mower& 5 ft John deere cutter Tractor was running fine last summer. Hasn't been cranked since- spins over but not firing- Sheet metal is very good- call for info. 334-217-0 6 8 7 This is a cash sale only On Mar-28-13 at 05:03:57 PDT. Seller added the following information: The finish mower& John deere cutter are also included- I can help load All can be inspected before your purchase All items are sold as-is where is Please call if you have questions 334-217-0687 On Apr-01-13 at 18:42:26 PDT. Seller added the following information: Update- Tractor started today- I pulled the carb. Cleaned it and put some good gas in the tank and it finally started- No smoke. No knocking but seems it may need the points adjusted. The clutch must be stuck because ... moreit has little pedal. Lift and pto both worked fine Call me for more info. 334-217-0687 On Apr-03-13 at 13:16:07 PDT. Seller added the following information: The clutch will not disengage the transmission- I had to start engine with trans in gear
This is the largest portable sawmill that Belsaw ever built. It is a Model A-24 which means it will cut a 24' log. The saw is a 54 inch insert tooth and is in excellent condition. This saw was probably from the 30's and even though it's disassembled it is all there. In fact there is an extra carriage and several other extra parts. Those new band saw mills are kinda nice but who has all day to saw up a pile of lumber. These old circle saws will out cut any portable bandsaw mill more then 3 to 1. Sure these take a wider kerf(this saw cuts about a 3/8" kerf)but they really get the job done. This will have to be shipped by freight but I have a local friend that runs the lower 48 with reefers vans and flatbeds so if you're interested I can get a quote from him. The"ways" ... moreor guide rails have been extend 2' so 25' material can be sawn. Even if you have a band sawmill these old circle sawmills are nice to have for canting the log thus saving your band and time. The book on this mill is obsolete however. You can get a book on the Belsaw M-14 and the machines are basically the same. The M-14 is just much lighter constrution. With todays economy there is no better way to make money then in your own small business. This is ideal for the guy that salvages timber or just sets up for custom sawing. Normally you get half the timber plus fuel for custom cutting. This mill was set up to be ran by a tractor but any 65+ horse stationary engine will do a great job. I will attempt to answer any questions that you may have. This could really be a great opportunity for someone to get into a very lucrative business of his own. You not only make money cutting the timber you sell the by-product which is sawdust. Any horse rancher will usually buy all you can make. If you don't like my price, make me an offer, who knows, I might just take it. Thanks for taking the time to look at my auction. I apologize for the poor quality pictures, if you are interested let me know and I will take and send you a
3 axle 20 feet 3 inches equipment trailer- all steel. Total length of trailer is 28 feet. Flatbed length is 20 feet 3 inches. Width of trailer is 8 foot 3 inches. Width between raised tracks is 5 foot 9 inches. This is a heavy duty trailer built to haul heavy equipment. The whole trailer is built out of steel. Even the bed/floor is covered with steel sheets. New wheel hub and bearings, All new lights and wiring. 8 new tires on new rims(6 on the trailer and 2 spares) 14 ply load range G New jack stand handle New paint It needs ramps. The axles are off a mobile home and are rated for 10k lbs each. The trailer is a 5th wheel but I used one of those gooseneck adaptors to work with a gooseneck truck. not included) Can Apply for Title with bill of sale. Please ask questions prior to bidding. Posted ... morewith
ASPLUNDH WHISPER CHIPPER WITH A JEY 12" DRUM. CHIPPER WAS COMPLETELY STRIPPED DOWN TO THE LAST BOLT. PAINTED, AND REASSEMBLED WITH NEW PARTS. HAS A FORD INDUSTRIAL 172 4-CYL ENGINE THAT WAS COMPLETELY REBUILT AND BORED.030 OVER BY WENGERS MACHINE SHOP OF MYERSTOWN. CARBURETOR, EXHAUST, WIRING, GAUGES, RADIATOR, ELECTRIC COOLING FAN, STARTER, ALTERNATOR, WATER PUMP, HOSES, BLADES AND CUTTING BAR ARE ALL NEW. COMES WITH AN EXTRA SET OF BLADES AND A CUTTING BAR. THIS UNIT WAS GONE OVER AND COMPLETELY REFURBISHED TO BETTER THAN NEW CONDITION. THE FORD 4-CYL INDUSTRIAL ENGINE IS VERY DEPENDABLE AND ALWAYS STARTS ON THE FIRST TURN OF THE KEY. IT HAS PLENTY OF POWER AND GETS GREAT FUEL ECONOMY. ONE OF THE GREATEST BENEFITS OF THE JEY CHIPPER IS THAT IT ONLY RUNS AROUND 2200 RPMS SO IT IS QUIET ... moreCOMPARED TO OTHER MODELS AND USES LESS FUEL DUE TO THE LOWER OPERATING RPMS. THE CHIPPER ONLY HAS 18 HOURS ON IT SINCE IT WAS REFURBISHED. I PURCHASED THE CHIPPER AND USED IT TO CLEAR A WOODED 2 ACRE LOT TO BUILD MY HOUSE. I NO LONGER NEED IT AND THAT IS WHY I AM SELLING IT. IT WILL MAKE SOMEONE A GREAT MACHINE! CHIPPER ALSO HAS ALL NEW LIGHTS AND A NEW 4 PIN TRAILER WIRING HARNESS.I TOOK A VIDEO OF THE CHIPPER TAKING 2 TREES ABOUT 5" ROUND AT THE BASE AND TURNING THEM INTO MULCH. ANOTHER VIDEO SHOWS THE ELECTRONIC TACH/ HOUR METER. PLEASE E-MAIL ME IF YOU WOULD LIKE THE LINKS TO THESE VIDEOS. E-BAY WOULD NOT LET ME POST THE LINKS IN MY AD. THANKS!
This auction is for one used excellent condition pto chipper. This is as close to new as you can get the only difference is the price. This is made in USA and is heavy duty. Sells for over 8000 new. I am only selling since I bought a tow behind model. The unit has under 30 hours total. Pick up in zip code 12740. I really don't want to ship, but can load for free on anything you bring to pick it up. I will deliver up to 200 miles for 1.75 loaded mile, but payment will be required before delivery is made. This is an auction so bid to win and ask questions now when the auction ends you own it so ask your wife before. Cash or certified funds only. 250 non refundable deposit within 24 hours after auction ends. PTO driven chipper. 30-50 HP(22-37 KW) 540 rpm The Befco PTO driven Bushmaster chipper ... moresaves time and labor by reducing humus material to a valuable mulch. It's ideal for nurseries. Contractors, small municipalities and golf courses. The Bushmaster's variable speed power-feed(70 or 45 Fpm) drum-style design gives smooth, sure handed feeding for continuous chipping of material up to 6" Designed with the user in mind. The Bushmaster provides easy access to the belts and chipper knives with a built in safety lock on the drum. The Bushmaster does not compromise on safety and that's why features such as smooth self-feeding system with no wood kickback, feed stop control bar, below waist chipper feed table and chipper drum locking pin for blade service are just some of the features built into the finest chipper on the market. Available as optional is a 15" blower pipe extension BUSHMASTER- TECHNICAL FEATURES Bushmaster. For tractors with PTO 540 rpm, 3 point hitch cat. 1 Model HP Weight Discharge Drive Capacity RPM Knives Feed rate BM6-800 30-50 900 360 manual swivel 6- 5V belts 6" 1450 2 7.5"X3"X3/8" 70 to 45 FPM Posted with
Weaver Throw Line w/ 16 oz Weight w/Bag. Only used once on one tree. Paid $40 for it. Check out my other auctions for tree climbing equipment. Will combine shipping. Payment due in 2 days and only ships to lower 48.
Found: in an old farm estate in central Indiana. Approximate Measurements: 5 1/2" tall x 1 3/4" across the opening. Marked or signed by maker: AMERICAN LOGGING TOOL CO EVART MICH. Condition: old. Aged and used. Comments: nice old piece. Approximate shipping will be based on a box that will be about 7 x 7 x 6 with a weight of about 1.8 pounds. ~~~~~~~~~~~~~~~ Shipping: I ship USPS. Shipping options are shown in the shipping tab. Unless an item is listed as pick up only. then the buyer will be responsible for contacting a shipping company or picking the item up them selves. I have listed a very good shipper below for a quick and easy quote. Fee's: I charge a $3.00 Fee already added into the shipping. This covers insurance or any other expense's I accure on your package. $2.00 ... moreon books) International Shipping: I charge a $5.00 fee for ALL International Shipments. Returns: Due to buyers remorse. I DO NOT accept any returns or refunds. Description: I list all my items to the best of my ability. If I fail to state something you feel is important, PLEASE email me with questions or concerns BEFORE you bid. All measurements are approximate. Photo's: A picture is worth a thousand words. VIEW photo's. They show condition better than I can describe it. Items I sell: I sell pre-owned items. Unless stated, ALL items will have been previously owned with condition stated. offers blanket wrap delivery inside your home at affordable prices. Enter your zip code and our item information will be pre-filled for you. Zip Code: Powered by The free listing tool. List your items fast and easy and manage your active items.
We have a Loftness Timber Ax 73H Mulcher that will fit a Skid Steer. We sold another one very similar to it a few weeks ago. It works perfectly. We have used it on some property and it does everything it is supposed to. It is slightly used. It came off a farm out of Ar. The guy bought a skid steer a couple years ago and this came with the package. He cleaned up about 10 acres and hasn't used it since, so the machine only has 50-100 hours on it. It has the hydraulics gauges on the attachment as well as the top bar to keep the trees off you. This attachment is ready to go to work. It cost right at $30,000 new. We are going to sell it to you at a bargain. We can also palatalize it and ship it anywhere in the US. Please call 501-881-4550 if you are interested.
2011 JOHN DEERE GATOR TX 4X2 WITH 2 CYLINDER KAWASAKI ENGINE. 158 HOURS. options: POWER DUMP DIFF LOCK PROTECTION PACKAGE FRONT AND REAR HORN ALL TERRAIN TIRES HEAVY DUTY FRONT SUSPENSION FLOOR AND BED MATS GATOR STARTS AND RUNS GREAT. NO SURPRISES. FASTER THAN ALOT OF GATORS I HAVE DRIVEN, 19 MPH IS WHAT SPECS SAY. I HAVE OWNER/OPERATOR MANUAL THAT WILL BE INCLUDED. I HAVE GATOR FOR SALE IN MY HOME TOWN AND WILL END AUCTION AT ANYTIME IF IT SELLS LOCAL. 500.00 DEPOSIT DUE WITHIN 48 HOURS OF PURCHASE. BALANCE DUE WITHIN 5 DAYS. DEPOSIT THRU PAYPAL AND BALANCE CASH ON PICK UP. IF YOU ARE NEAR INDIANOLA IOWA AND WOULD LIKE TO COME INSPECT AND DRIVE PLEASE CALL OR TEXT JOE AT 515-991-1114. GATOR IS SOLD AS IS WITH NO WARRANTY AND NO REFUNDS/RETURNS.
Here is the throttle connection rod from the Sthil MS 440. This might fit other models like the 044 046 or the MS 460 Please check before bidding. I will combine shipping. WILL SHIP WORLDWIDE. INSURANCE AND DELIVERY CONFIRMATION IS OPTIONAL, ANY FORM OF LEGAL PAYMENT ACCEPTED. LOCAL PICK-UP OKAY, CONTACT IN ADVANCE FOR ANY ADDITIONAL REQUESTS AND FOR SHIPPING IF YOU ARE OUTSIDE THE CONTINENTAL UNITED STATES.BE SURE TO INCLUDE YOUR POSTAL CODE. OTHER PHOTOS ON REQUEST OR AVAILABLE FOR VIEWING ANYTIME. Just a quick reminder to my International buyers when leaving feedback that I have no control over how long an item is in transit and I do my best to keep your shipping costs to a minimum. I usually ship within one business day.
4WD Burned Kubota Tractor for Parts. Model M7030DT-71653, Engine No V-4000-3A Logging Equipment-Burned Kubota Tractor Model M7030DT-71653. Engine No V-4000-3A This Model was Made in Japan and is a 4 wheel drive unit Hydraulic 3-Point Hitch Pump. $350 At Ackerman’s Used Parts we endeavor to sell the best used car and truck parts. We describe them as accurately as we can. But if you have any questions, call us toll free at 1-800-822-9898, or email us for more pictures. Read our feedback and you will see how much our customers like doing business with us. Our retail store is open Monday-Friday 8am-5pm. We have been located on US Route 76 in Prosperity, South Carolina, for over 40 years, just a few miles off exit 82 on I-26. We strive for positive feedback all the time, take a minute to read some ... moreof the feedback from our trading partners. These are pick up items. If you are considering purchasing it you know it is big and heavy. It would have to go on a straight body truck or flatbed trailer. With that noted we could contact our shippers and see if we can arrange something for you. If you need additional pictures. Please let us know and give us an email address as ebay only lets one go through their system. The rims are dented and bent. Please see pictures. Important Note on Overseas Shipping WE WILL SHIP PARTS ALMOST ANYWHERE IN THE WORLD. BUT WE OFTEN ENCOUNTER DELAYS AND STAGGERING POSTAL COST FOR SMALL ITEMS. The US POST OFFICE ALSO LIMITS THE WEIGHT PER BOX TO 70 POUNDS. WITH THAT NOTED WE WOULD BE HAPPY TO QUOTE THE POSTAL RATES FOR YOU.
FAIRMONT HYDRAULICS LIMB LOPPER LONG REACH HYDRAULIC POLE SAW- PROFESSIONAL- GREAT WORKING CONDITION + BONUS ITEMSThis listing offers a used professional Fairmont Hydraulic Limb Lopper Long Reach Hydraulic Pole Saw. Limb loppers are most frequently used to cut limbs and branches around power lines. Clear overhanging brush, and help maintain a clear line of sight on public roadways.The overall dimensions are about 81 inches in length, 6-1/4" wide; it weighs about 14 pounds.This Limb Lopper has been carefully cleaned and cared for and actually includes a brand new bar and chain as well as the instruction booklet, seal kits, and an extra sprocket.It is offered with a low opening bid and a reasonable Buy It Now Price. New, these cost well over $1,000. Why buy new when this Limb Lopper will ... morework just as well for much less than 1/2 price?Please view the photos to help you make your own judgement of condition and value.Thank you for stopping by. Please check my other listings. I gladly combine shipping whenever possible. Please contact me at close of auction(or before) if you wish to combine shipping. Also, I hope you'll check my other listings. I offer interesting items and plenty of variety.SELLER TERMS AND CONDITIONS:PAYMENT: We accept and prefer PayPal and greatly appreciate payment at the time of purchase.SHIPPING: Shipping costs are calculated by weight and dimensions of the product packaged for shipment. We do not add charges for shipping materials(unless otherwise noted in the listing) We do sell internationally. When a listing offers FREE SHIPPING, it does not include shipping to locations outside of the lower 48 US States. Shipping outside the lower 48 will be calculated and invoiced accordingly. If you desire a shipping service other that offered in the listing, please contact us through eBay and we will add that service as an option so that you can calculate actual shipping costs for your chosen service. Shipping will occur within one day of receipt of payment. You will receive an automated email pr
Up for auction is a set of tree climbing spikes with belts. I purchased this set a few years ago when I was feeling adventurous. Never quite got to the point of using them. I figured that I should pass them on to someone that has the right stuff.
PRECISION HUSKY BRUTE LOG LOADER XL235 CRANE STACKER TIMBER LUMBER LOGGING RIG UP FOR AUCTION IS A HUSKY BRUTE XL235 WHAT YOU SEE IS WHAT YOU GET. THE MOTOR IS NOT RUNNING SELLING AS IS. 4871 HOURS S#8420. GOOD OVERALL CONDITION. LOCATED IN OIL CITY LA 71051 NEED IT SHIPPED? CALL FOR A QUOTE CALL TROY AT 970-466-2886 WITH QUESTIONS. call me. Troy at 970-466-2886 if you have any questions or comments. thanks for looking and good luck! we take paypal visa mc amex and discover, as well as checks or wire transfers. bid with confidence. Payment is due within 3 days of end of auction unless other arrangements have been made or if payment is due upon you picking the item up. Please contact us if you have any questions. Please use checkout to pay for this item online unless you have made other arrangements ... morewith us prior to the end of the auction. Highest bidder takes it. You may pick this item up at our Sterling. Colorado business location or at our warehouse depending on location of items. Must be paid for in 3 days from end of auction. Please contact us for a shipping quote unless the item is listed as pickup only. You can avoid shipping charges on this by picking the item up or arranging your own pickup and shipping. But if you do need it shipped, please know that there will be a packing or crateing, palleting fee. We have no choice on this fee. Depending on the item, it can vary from 50.00 US to 100.00 US. Palleting large parts or packing glass windshields can be costly if you want the item to arrive undamaged and we pride ourselves on delivering the part you paid for in the advertised condtition. ALL items shipped via UPS are required to be insured. We cannot refund any purchase that has been shipped via freight due to shipping damage. Any damage claims must be made against the carrier by the purchaser. We will assist you in any claim as much as possible however we cannot assume any responsibility for damage during shipment. All sales of this item or any large item that is shipped whether via freight or UPS ground
Prentice 150 log loader all works no cracks or repair welds. About a 24' reach and a half cord bucket. The truck has a NH290 cummins with a 7 speed spicer tranny. I do have this listed locally and reserve the right to end the sale at any time. Any questions call(989)464-1827 Posted with
Low Hours: ~960hrs on working meter(still using) My ASV RC100 Multi-Terrain Loader is super clean for its age. Well taken care of and one of the best machines out there. Most of the components on this machine- including the engine, hydraulics and controls- are all high quality Caterpillar components. About the Loader: The loader is in excellent mechanical condition and has a strong running Cat 100hp diesel engine with responsive joystick controls. The joystick controls are effortless to operate and extremely smooth. Engine runs strong. Starts right up, and does not smoke except during heavy acceleration like any diesel. The pictures were taken with it running. There are no cracks or repair welds on the loader. The tracks are in good condition. There are a few chucks missing on the edges of ... morethe tracks, but nothing that affects its operation. It is rated by the manufacture of having a 50% tipping capacity of 3800lb! The paint is not perfect, but this is an excellent working machine. It has a TWO SPEED transmission for quick travel between job sites. Includes HIGH FLOW. 38GPM Auxiliary Hydraulics AND Low Flow Hydraulics: This is a high flow machine. 38GPM Auxiliary Hydraulics for virtually any attachment made for skid steers. It also features hydraulically actuated quick attach which means you can change attachments without leaving the cab! It is plumbed AND wired for low flow auxiliary hydraulics(~20gpm) for running other equipment with the control buttons already integrated into the joystick handles. Includes Forestry Package: This ASV RC100 also has the exclusive forestry package which includes extra mechanical protection around the cab and engine area as well as a filtered fresh air supply separate from the standard heating and air conditioning controls. It has a full enclosed cab and the heater and air conditioner both work. The cab features a back up camera and 4 ultrasonic back-up sensors to help you see behind you. Includes Fecon Bull Hog 74SS Mulching Head: Also included with the
2003 CHEVY SERVICE TRUCK. 6.0L, AUTO, AIR, CRUISE, TILT, 56500 MILES, 7'6" WESTERN PLOW, TRUCK IS IN GREAT SHAPE. THERE IS TAX, TITLE, PLATE, AND DOC FEE THAT WILL HAVE TO BE FIGURED INTO SELLING PRICE ALSO. PLEASE CALL 231-824-9505 LUTKE EQUIPMENT LLC 606 RW HARRIS DR MANTON MI 49663
1996 chevy chip truck. 56,000 miles. Standard 5 speed transmission, has a gas engine, new wheel simulators, pintle hitch, man cab, plenty of tools boxes, nice truck going out of business so I don't need it anymore. Pulled a Vermeer bc 1800 chipper just fine. Interior is in good shape no rips in the seat, etc. tires are about 65-70% all the way around. The stripes on the truck are vinyl so if u don't like the colors you can peel them off. The truck dumps fine never had and problems, no rust good and solid. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e52edc590-0x100-
I'm selling my spare stump grinder this grinder has sat for 15 months as a back up but was never needed. I'm currently looking to clean out all my unused equipment so someone else can use it before is goes to crap. Grinder ran great last time it was used but then I bought a bigger diesel and smaller 252 now it sits no reserve auction may end at any time do to local sale or good offer or I'll clean out carb and take it to delaware and use it as spare for another year. currently it doesnt start it tries to but the gas is old and the carb needs cleaned thanks craig
Luminos Stereoscope glasses. Ps-2a. With case. Folds up flat. Please ask any and all questions before bidding. No International bidders. Please. Condition is described to the best of our ability. Only what is shown, described or reported will be expected and included in this auction. Due to the amount of items we list, it is not possible for us to test every function or application. If you have a specific question or test request, just ask. We will do our very best to accomadate your request. Items are sold as is unless otherwise stated. Because items are as is, we price accordingly and aim to be the lowest price on eBay. We do not accept returns because we have had too many parts scams. We photograph and catalog all serial numbers and boards. Don't bother trying to scam us. Buyer accepts ... moreall responsiblity for Electrical safety Inspection, testing and calibration when applicable. Please check out our other items and add us to your favorites. Posted with the
UP FOR SALE IS 2005 FABTEK SINGLE BUNK FORWARDER. 23.1-26 RUBBER, JOHN DEERE ENGINE. ANY QUESTIONS PLEASE CALL 231-824-9505. LUTKE EQUIPMENT LLC 606 RW HARRIS DR MANTON MI 49663
1995 CATERPILLAR 527GR. DOZER/SKIDDER, 7100HRS, ESCO Fixed Grapple& Winch Drum,6 Way Blade, OROPS, good condition, Undercarriage at 70% Tracks at 40% always cat maintained, 1000 hours on recent motor rebuild.Great machine and hard to find. We have two of these availible. Any questions email us. Located in graeagle ca. Will assist in shipping anywhere in the world. Sold as is where is.
Lots of new parts! On site Inspections welcome and any question welcome also! Runs Good! Will need batteries replaced if used every day. Sold as is where it sets buyer will need to arrange pickup. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e5f98f183-0xf6-
This unit came off of a 961 ford tractor. Eaton pump that is new and never been used. All the insides are with pump(screen etc. I bought the pump new to put my tractor I had rebuilt but sold the tractor before I could use it.I do know the cylinder leaks from the shaft end,it did when I removed it. Was going to fix it or get another one,but now I dont need any of this so Im selling it. Calculated actual shipping! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e66905ba3-0x103-
YOU ARE BIDDING ON THE ALASKAN MK 111 PORTABLE LUMBER MILL. THE MODEL NUMBER IS G776-30. THIS AUCTION IS FOR THE PORTABLE LUMBER MILL ONLY. IT DOES NOT INCLUDE THE SAW. IT DOES NOT INCLUDE THE GUIDE RAILS THAT ARE AVAILABLE ON MY OTHER AUCTION. THIS ITEM IS USED AND IN VERY GOOD CONDITION. PURCHASED NEW AND NOW I AM FINISHED.
Four row carousel planter in fair condition with 400 gallon capacity. For any other questions feel free to call 606-307-5422 Will deliver up to 100 miles Posted with eBay Mobile
Cushman by Jacobsen spray tec ds-175 spray unit.this unit has a stainless steel pto driven pump with power booms all computer operated and 100 ft of what appears to be 5/8" rubber hose on a coxreel manual hosereel. the Cushman is gas powered with a 4 speed manual with reverse transmission model# 898625 d 175.Date code f0404, serial#2166304.pump was filled with antifreeze and fully circulated prior to winter storage. Local pickup only.
up for sale is a used Echo wood chipper. It has a belt drive. Hydraulic powered auto feed, and kubota diesel power. it will chip trees and branches up to 6" the discharge shoot swings 360. it takes a 2" ball for towing. it was manuf 11/08 and currently has 47 hrs(we are going to use it this week so it may have a few more) the blades and tires are both in like new condition. i also have the parts and owners manualthat goes with this machine. here is a link to Echo for the specs as you can see this machine is 20 grand new. This is your chance to buy one for about half. here is a link to see a video of this machine running on 4/29/2013. feel free to come and check it out for your self just give me a call 419-277-1086 my name is william. this item is located in portage ohio. 43451. this ... moreitem is local pick up only. sales tax will be charged unless item is being shipped out of state(copy of bill of lading must be provided to us) or a tax exempt form is filled out. thanks for looking 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e6af0927f-0xfc-
FOR SALE! Model X710C Master Winch Control. Came off a TimberJack skidder. Worked perfectly one year ago. Stored inside. CASH ONLY SALE. For more questions please call 319 795 8778. Shipping will be the buyers responsibility.
Excellent condition run less than 500 hours- clutch assembly and vbelt pully included 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e71d1f737-0x102-
LOT 4 EACH. WAJAX MK 75 OR MARK 75 FIRE FIGHTER 2 STROKE ROTAX PUMPS, PORTABLE UNITS. ALL RUN, BUT, ONE NEEDS A CARB CLEANING OR? AS IT WILL NOT REV ALL THE WAY UP WITH OUT LOADING UP. ONE HAS A BROKEN ADJUSTMENT FLOW KNOB. ALL NEED NEW BATTERIES. COULD NOT FIND A LOT OF INFO ON THESE AND DO NOT KNOW MUCH ELSE ABOUT THEM. BUT, THE COMPANY WAJAX IS NOW CALLED WILDFIRE. WELCOME TO COME INSPECT. SOLD AS PICTURED, AS IS, BUYER PAYS FREIGHT FROM 97338, 1255 LBS. I CAN QUOTE GOOD RATES TO SHIP. CALL JOHN FOR? 310) 7 1 7- 1 5 1 4 PACIFIC TIME ONLY 9AM-5PM. CREDIT CARDS WELCOME
For Sale: Dakota Hand ET28 Towable Tree Spade. Electric/Hydraulic control. It uses a generator to run an electric motor mounted hydraulic pump. The generator also operates an electric breaker(jackhammer) that is used to pound the spades into the ground. The hydraulics lift the tree out of the ground and tilts the tree forward for transportation. The ring opens so you can back up to the tree you want to move It can be pulled by a riding lawnmower. Tractor or truck with a 17/8" ball. I moved around 100 trees with it. It is rated to move 2-2 1/2" trees but I pushed it a bit higher with good results. The spade did not come with the generator or breaker, which I purchased afterwards. The generator is a Homelite LR5500 which is a 5500 watt unit run by a 11HP Briggs engine. The breaker ... moreis a Bosch electric weighing around 60-70 pounds. It has a special tip that fits on the blade. There are 6 blades on the spade and each on is driven in the ground by the breaker. It requires a bit of muscle but it works. I can deliver within 50 miles of 54473 for a fee of $1.50/mile round trip, otherwise the item is to be picked up at my location.
We have a used plastic felling wedge. Made by Grass Valley Wedges. Medford, Oregon. Measures 7 3/8" in length, 3" in width. To be used with chain saws for felling timber. The patent dates puts it at 1965. It is in good used condition, little bit of mushrooming and chipping at top, a nick at the tip and a couple along the side. For additional information or pictures please contact. Shipping free in U.S. IF ANY QUESTIONS PLEASE ASK BEFORE PURCHASING. RETURNS ACCEPTED ONLY IF ITEM NOT AS DESCRIBED.
You are bidding on a blinker switch your 56 and 66 series International tractors. This switch is in good tight condition without play. The buyer will pay $8.50 for shipping(overseas and Canada will be more) We will combine shipping when and where it is possible. We except all forms of payment but Paypal is not preferred.
Up for sale is a pair of used Elkhart Brass Select-O-Matic Fire Hose Nozzles. These are for 1 1/2" hoses. The smaller nozzle is rated at 300 GPM and is in good working condition. The larger pistol style nozzle is rated at 200 GPM and needs repair(Missing bolt- see photo) The pistol style nozzle is being sold'As Is' TERMS: Payment is to be received within 7 days of auction end. Please email any questions before bidding. All sales are final. Payment via PayPal or contact buyer to arrange alternate payment method. Buyer pays actually shipping. Illinois residents will be charged 7% sales tax. We will only ship to the continental US.
Nice low hour 4X2 Gator. Equipped with diff lock, machine has manual dump box with liner. Kawasaki engine, starts and runs great, no issues. One cosmetic issue. Crack in fender can be seen in last picture, it is on passenger side near where passenger knee would be when seated. Tires are in good condition. Still plenty of tread life, seats good with no rips or tears. I have machine for sale in Indianola. IA and available for you to come inspect and drive. Please call Joe for directions or if you have any questions at 515-991-1114. LISTING MAY BE ENDED EARLY IF GATOR IS SOLD LOCAL. 100.00 Deposit due within 48 hours of purchase via paypal. Balance due in cash when YOU pick up from my house within 10 days of purchase. If you require a little more time I am sure we can work it out. Please ask. ... moreGATOR IS SOLD AS IS. NO RETURNS. PLEASE BE SURE YOU WANT IT BEFORE MAKING ANY OFFER. AGAIN PLEASE CALL OR EMAIL ME WITH ANY QUESTIONS.
This listing is for a lot of the following Homelite Super XL auto oiling chainsaw parts: Cylinder- used in excellent condition with no scoring or heat damage. All of the fins are present and uncracked. This is a genuine Homelite part. 70072 Piston. Wristpin, and rings- also in excellent used condition with no significant wear present. Genuine Homelite 69241 1A Piston rings- new. European aftermarket Cardboard cylinder base gasket(new) Fuel hose#38-4972(new) This is basically everything you need to replace your burnt piston and cylinder. And the new fuel line just because it's good to replace these regularly on SXL saws. These parts can also be fitted to the Homelite XL 12 for 2mm added cylinder bore. These items will ship next business day via USPS Priority Mail. Please ask any/all questions ... moreprior to bidding. Thanks for looking! 100% POSITIVE FEEDBACK SO YOU CAN BID WITH CONFIDENCE!
Good working tree mover with a strong diesel engine.Minimum repair and maintenance required(filling tires with air. Battery replacement) please serious bidders only. Please contact me before bidding on this item. Call me after 5:30pm or text at 817-572-3306. We can have it delivered to you for $2 a mile. Located in Dallas- Fort Worth, TX Powered by The free listing tool. List your items fast and easy and manage your active items.
2002 SERCO 7500 LOG LOADER. ONE OWNER, SUPER LOW HOURS, THIS WAS BOUGHT AND USED AS A BACK-UP MACHINE AND SPENT MOST OF ITS LIFE AT THE SHOP TO UNLOAD A TRAILER NOW AND THEN. THIS CAN BE MOUNTED ON A TRUCK OR TRAILER, TANK,PUMPS,HOSE,DRIVESHAFT AND THE ORIGINAL MANUAL GO WITH IT. LOCATED NEAR HOULTON, ME SHIPPING IS THE RESPOSIBLITY OF THE BUYER, WE CAN HELP LOAD. ANY QUESTIONS PLEASE CALL DAN@ 845-559-4316 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e8524e446-0x101-
75.000 Original Miles- subject to change truck is being used until sold. 55ft Altec Bucket on a 1993 International Body With a 11 ft chipper dump body and storage boxes Runs and Drives good tires good brake s. New oil/ filters. New fuel and cooland filters. Good Glass If you want to inspect the truck. Please do it before you bid. 1000.00 deposit day of auction end. remainder to be paid in full within 5 days. Must pick up truck.
Well maintained 2008 Altec CFD1217 Brush chipper with 498 hours. Chipper has Kubota Deisel engine(80HP) Auto Feed Plus feature. Electric brakes and good tires. Local pickup preferred but shipping can be arranged at additional cost to buyer. Loading dock available. Bank certified check or cash also accepted.
8 feet with two snaps Used one time on a 10 foot climb Black marks on surface Bought it new about five years ago
Clean and ready for work. Shop Serviced New Battery/ Fuel Pump/ Starter/ 2 Rebuilt Hyd Feed Roller Motors/ Oil change& Filter/ Hyd Filter/ Cleaned& Repacked Wheel Bearings& Seals/ Buyer is resposable for all shipping cost. I will help loading to ship. For more information/ Inspection call Pete 856 332-2402
BAKER CUT-OFF SYSTE M* This auction is for a very nic e B aker Cut-Off Saw. 3 phase. 220 or 440 volt. With infeed and outfeed conveyors. P neumatic operated. V ery good condition. Also has extra saw blade. Buyer to arrange shipping. Will load for free.
Hi, After almost 20 years of living on a heavily-wooded Tennessee farm. My wife and I are downsizing and selling some of my equipment. I am putting up for auction a lightly-used and well-maintained Vermeer BC906 chipper in great condition. It's a pto-driven 9 inch chipper that was professionally mounted on an axle and wheels assembly so that it can be towed from site to site as opposed to being lifted and hauled using a 3 point hitch. This has made it MUCH easier to attach to my tractor and move it around my property. Also. It can be towed by any pickup truck and shared with friends and neighbors who have suitable tractors. Trying to do that with a conventional 906 chipper is a real pain because most tractors can't lift the unit high enough to place on a trailer! The Vermeer BC906 ... moreis a much heavier duty chipper than other brands. It's also much safer. With a 68" feed table as compared to 36" or less on most competitive chippers. The capacity of many chippers is significantly overstated, but this unit will actually handle wood up to 9 inches in diameter. Of course, the type of wood makes a difference(cedar trees chip a lot easier than oak trees do) but I can pretty typically cut a tree down with a 5 inch diameter, stick the base in the chipper and let it grind it up in a matter of seconds. If a trunk or limb is very heavy or thick, I simply use the control bar to start and stop the feed mechanism whenever the cutting disc seems to be lugging. Please note again that this is a pto-driven model. It does NOT have its own engine but instead relies on the engine of the tractor to which it is attached. This dramatically reduces the cost of maintenance and makes the unit virtually trouble free. All you need to do is grease it periodically. Check hydraulic hoses and level and sharpen the knives. NO engine maintenance and expense! IMPORTANT: This model requires a tractor with between 53 and 80 PTO horsepower. Also included(see photo) are: manuals. A VHS demo tape, a Vermeer hard hat and a second set of
With this Vertex III Hypsometer you can quickly and accurately measure tree height from 0-100m(0-300ft) and distances from 0-30m(0-100ft) Readings can be made in metric or English. Convenient. Pocket size unit even works through very thick vegetation and brush. Unit automatically displays distance, and horizontal distance to transponder or target. The Vertex III is a professional instrument for measuring heights(trees) Distance, angle inclination and air temperature. The Vertex III can measure an indefinite number of heights per object and the 2 lastly measured heights; the angle and the horizontal distance can be transferred to the Mantac Computer Caliper or other field computer device via IR(Infra Red) link for further storing and processing. In the distance measuring mode(DME) the slope ... moredistance can be transferred with IT. The Vertex uses ultrasonic signals to obtain the exact distance. Heights are calculated trigonometrically with the distance and angle variable. The Vertex III uses ultra sonic signals to determine distances. Humidity. Air, pressure, surrounding noise and, above all, the temperature can affect the range and extension of the ultra sonic signals. The Vertex III has a built-in temperature sensor that automatically compensates for the divergence caused by variations in temperature. In some cases, distance of 40 meters and greater can be measured without problems, and in other cases, the maximum distance can be shorter that 30 meters. This specific unit does not contain the plot center staff. Comes with user guide on how to use. This specific unit retails for approx. $1700.00 new
These are the most comfortable pads that are made for the price. I could stay comfortable all day long while in a tree, the only reason for selling is that im upgrading to Gecko climbing spikes. these pads are in great shape. I bought them new and took great care of them. The aluminum is nice and light while the thick neoprene pads adds no weight but adds exceptional cushion and support for all day comfort. They fit Buckingham and Klein climbing spikes. The straps in the pictures are included.
Used crankshaft. Very good condition. Big end bearing has no detectable play and is very smooth. Posted with
I have ha d a lot of antique saws but this one is the rarest o f all. RUNS GOOD with grea t power! Missing air cleaner end cap. Good bar and chain. Selling and shipping to the LOWER 48 states ONLY. Shipping is a set $ 4 4
This is a unverferth cultiplanter frame. It used to have a 20 ft cultivator on it that I am now using. I do not need the frame anymore. No cracks or welds everything is straight. Posted with 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e8b1ef021-0x104-
Good used CTR/slasher saw. Has a two-piece table that goes out to 18 foot 6 Inches. Just rebuilt hydraulic cylinder it has a new Driveshaft. Sprocket and nut. It runs off of a three line set up, Hydraulic lines come with the saw but does not have quick connect ends. This item is pick up only NO SHIPPING. $100 deposit is due 24 hours after the end of the auction through PayPal and the rest is due cash upon pick up. The item must be picked up within seven days after the end of the auction. Any questions my name is Tim my phone number 740-591-1466 and my email is boggslogging@yahoo.com Posted with
Early 1980s Caterpillar 930 Parts Machine Was Parked a few years ago when Transmission went out Engine was rebuilt less than 500 hours ago but got water in it while it sat Has the Auxiliary Hydraulic Valve 3 Firestone Forestry Special Tires size 23.1-26 in good condition the 4th tire is another brand and has a split in the sidewall Pemberton Quick Coupler Model# CAT-930-OHC Serial# 0634-3-186R 3-yd Rock Bucket
Alaskan MK III Portable Lumber Mill Model# G776 37" x 14" x 19" Alaskan MK III portable lumber mill model G776. Measures about 37 inches by about 14 inches by about 19 inches. C omes with what is shown and as shown. Please see the photo. ATTENTION: WE ACCEPT PAYPAL PAYMENTS! About Us: We offer a large variety of items and do not specialize in any one area. The majority of our items are acquired through estates. Home sales, storage bins, closeouts etc. We describe them to the best of our ability and use multiple photos to help aid you in your bidding decisions. If you have any questions or concerns please email prior to bidding as we are not specialty sellers and something that may seem obvious to you regarding an item may not be obvious to us. All items are as pictured and described ... moreto the best of our abilities. Regarding Classes of Mail and Delivery Times: We are a small operation and ship out twice a week. Due to this please expect a minimum of five business days(even though most orders will ship out sooner) We appreciate your business so please respect our posted processing time. Orders placed between 9:01 am on Wednesday and 9:00 am on Saturday will ship the following Tuesday(three days after Saturday) Orders placed between 9:01 am on Saturday and 9:00 am Wednesday will be shipped on Friday of that week. While Media Mail and Parcel Post are cost effective they are also the slowest methods of transport. Within the continental U.S. lower 48) these can take up to two or three weeks to arrive. When choosing these methods for Alaska. Hawaii. Puerto Rico expect delivery time of a month or more. This also applies to APO/FPO addresses. Please keep this in mind when choosing class of mail during checkout. DO NOT EXPECT TO RECEIVE MEDIA MAIL SHIPMENTS ANY SOONER THAN TWO WEEKS. Sometimes it may arrive quicker. Most times this is not the case. In some instances when Parcel Post is chosen we may upgrade the shipment to Fed Ex Ground since they are a more efficient means of transport. Priority Mail is gener
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Gannon Landscaper Box Scraper w/Rippers 80 in. Item Description: This is a Box Scpaer by Gannon. 80 in. wide with 3 point attachment. 8 ripper blades. Note Buyer ... morewill be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Ridgecrest. CA 93555 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33359) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Condition: This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. We can not verify operational status. May need service and/or parts to make fully operational. nbsp, nbsp, Pickup Logistics and Handling: NOTE: SHIPPING is NOT AVAILABLE for this item- LOCAL PICKUP ONLY. Due to the location of this item. This item can not be shipped. The item can not be prepared for pickup. Item must be re
1996 John Deere 548G Serial#DW548GX55 28 tires- good tires Strong Motor& Transmission Fairly new hydraulic pump Strong Hydraulics Center Section really loose Grapple control valve leaks and needs resealing No side covers Was used at woodyard Good winch& grapple $12.000 Posted with
This is a 2001 all terrain Jarraff tree trimmer with a 75 foot fiberglass boom so you can trim trees without shocking the machine or operator. This unit has been upgraded with a newer 2006 Deutz diesel engine that produces 97 HP with a turbo charged engine. Engine runs extremely well and there is a new front ram for the blade in front. IF YOU HAVE ANY QUESTIONS PLEASE CALL JOHN@ 228) 533-2124 The gauges have all been replaced and about $5000 in repairs and improvements have been completed. She has NO hydrolic leaks and the engine will run all day long. The boom has been reinforced and the repair is better than new. This unit uses a 24 inch carbide tipped circular saw blade to slice through tree limbs and clear the path for the elect rical lines. These units are bringing about $150 per hour ... moreunder contract. There are a few issues like worn tracks and a couple of drive gears but a new unit is around $240.000.00 and thin one could be bought for considerably less. These units are hard to find used at a reasonable price and this one is reasonable. The pictures below are of a new unit but the design is very similar and look about the same. Only better and prettier. Specifications. Ingenuity. Innovation and experience go into every Jarraff All-Terrain Tree Trimmer. From the smallest hydraulic seals to the 75-foot boom, every machine is constructed with unsurpassed quality and craftsmanship. The means you can expect outstanding performance in the field whether its standard tree trimming and cutting or transmission and distribution line clearing. The telescopic boom extends up to 75 feet with a 90-degree range of motion. Providing unmatched cutting height. The non-conductive, high tensile fiberglass construction provides shock resistance and strength while limb deflectors protect the operator from sliding branches. 24-inch blade with carbide tips operates at 3.200 rpm. Two specifically designed blades come with each Jarraff. The Jarraff’s saw blade is constructed for raw
I have a 1998 RAYCO T-185 Hydro-Stump.And Flail mower, It has 2400 hrs, HYDRAULIC'S are in good shape. Its runs great. Ready for work.need nothing. Deliver is possible. Machine is lotated in Hudson.Oh 44236. Minutes from route 8. Any qustions call Billy at 330-388-1435 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e94ba60cf-0x103-
2006 Tow Master flatbed. Goose neck trailer. 29 ft. dual tandem, dove tail, 10,000 lb. axels, turbo tube. Used very little. Trailer and tires in nearly new condition. Interested perspective buyers should contact seller on cell phone# 417 543 2347 instead of sending emails. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e94ba60d5-0x103-
New in Box PTO for a n IH Dozer Crawler. May fit others. But I hav e been told it was bought for a 9. It is very heavy. So I have local pic k up. E-mail with Questions or for more Photos. Satisfaction Guaranteed. Insurance included with Shipping. See my other auctions for similar items. Will combine shipping. Fixed prices for shipping are for lower 48. No handling charges. International bidders: Please wait for the invoice as the eBay shipping calculator is close. But not close enough. I pack very well. Using plenty of cushioning in strong boxes, and even double boxed with fragile items. I usually ship the day after payment, US Postal for Light Items and Media, Fedex for heavier items.
Husqvarna 51 Chainsaw Power Head This auction is for a Husqvarna 51 Chainsaw Power Head. It is for parts or repair as it is incomplete and has not been fired up. Please refer to the pics for condition. DISCLAIMER: We make every effort to depict and represent the items accurately. If you have questions after receiving an item. Please contact us immediately. We pride ourselves on providing excellent customer service and will make every effort to assure your satisfaction. Your satisfaction and positive feedback is our number one priority. Please ask questions BEFORE you bid. It is your responsibility to ask for the information if it is not in the description. All posted shipping costs are for the United States. International bidders will need to request a quote for the approximate shipping charges ... moreBEFORE the end of the auction. We will combine shipping on items unless to do so would cause damage to the items. PayPal is the preferred method of payment. Cashiers Checks will be accepted ONLY WITH PRIOR APPROVAL. Enter Text in Properties Inspector_gsrx_vers_486(GS 6.5.1(486)
Pair of Oregon Chainsaw Bars This auction is for a Pair of Oregon Chainsaw Bars. Both are in used condition showing wear consistent with age and purpose. Both are straight. One is 22 1/4" long and the other is 22 1/2" The longer one has the numbers 7915 FB and 200-D176 stamped on it. The other has the numbers M 050/13 325 78 and 2005SLCK095 Tl 85162. DISCLAIMER: We make every effort to depict and represent the items accurately. If you have questions after receiving an item. Please contact us immediately. We pride ourselves on providing excellent customer service and will make every effort to assure your satisfaction. Your satisfaction and positive feedback is our number one priority. Please ask questions BEFORE you bid. It is your responsibility to ask for the information if it is ... morenot in the description. All posted shipping costs are for the United States. International bidders will need to request a quote for the approximate shipping charges BEFORE the end of the auction. We will combine shipping on items unless to do so would cause damage to the items. PayPal is the preferred method of payment. Cashiers Checks will be accepted ONLY WITH PRIOR APPROVAL. Enter Text in Properties Inspector_gsrx_vers_486(GS 6.5.1(486)
This is an EDCO Medium Duty Winch. The unit was removed from a non running dozer. Seems to be fine but no real info. available. Unit sold as is where is with no warranties written or implied. Descriptions believed to be correct but are not guarantied to be so. Check. Verify and or call before you bid. ALL SALES ARE FINAL! Payment to be received within 5 days at address below. Buyer responsible for any taxes or shipping cost due.
You are bidding on a Prentice 180E Log Loader and CTR Model 45 Reversible Sawbuck with 18 foot bed. Loader is joystick controlled with a 6 cylinder Cummings motor. Call with questions-Tim at 570-971-1357. Also FOR SALE LOCALLY and I RESERVE THE RIGHT TO END THIS AUCTION EARLY if it should sell locally. NO PAYPAL ACCEPTED! Cash or Cashier's Check only. Must be paid for within 5 days. LOCAL PICK UP only.
Gravely Tractor was in Storage 5 years not running no battery seems to be complete other wise will not seperate the broom must take all NO FREE SHIPPING! Selling as is We can get good frt rates just give me your zip code
FORD 8N TRACTOR HYDRAULICS REFERENCE MANUAL 20 page booklet printed by Ford New Holland June 1987 as a reference manual for principals of operation& repair& maintenance procedures for the Ford 8 N Tractor hydraulic system. Manual in good used condition
LOOKING AT TWO NEW HOLLAND OPERATORS MANUALS FOR THE FOLLOWING TRACTORS TC35A-TC40A-TC45A-TC35DA-TC40DA-TC45DA- THESE MANUALS ARE IN VERY GOOD SHAPE INSIDE AND OUT TY FOR LOOKING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ea10c2f6b-0x103-
1997 Toro Groundsmaster 580D. Serial# 30580-70115. 2405 Hours. City was previous owner and said this was orginal hours. Full service completed and blades sharpened. 6 gauge wheels have had their bearings replaced the rest are fine. Tires almost new. Cruise control and high range work. This mower is ready to go. Operators. Parts and service manuals included. Might be able to help with delivery for a fee. Mower is sold as-is with no warranty. Must pay within 5 days. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13ea14453da-0xfa-
Antique saw for hit and miss engine or pulley type system. Blade is stuck but would likely be okay with some TLC. Posted with
REMOVED FROM MILITARY GENERATOR ENGINE. GOVERNOR IS USED BELT DRIVEN. PULLY MEASURES ROUGHLY 4-1'2" ACROSS. MADE OF METAL WITH A 3 BOLT MOUNTING FLANGE. LOOKS GOOD BUT PULLY IS BENT WILL NEED FIXED OR REPLACED. MAY HAVE SHELF DUST RUST AND OTHER IMPERFECTIONS SOLD AS IS. BUYER MUST PAY SHIPPING. OHIO BUYER MUST PAY TAX. Be sure to add me to your favorites list!
This is a used item but works perfect. Stanley PR40 Pruner with hoses. Pictured is the actual item. Light cosmetic scratches form normal use. Local pickup is also available Powered by The free listing tool. List your items fast and easy and manage your active items.
This attachment is in good condition but does not have any carbide teeth. I am selling as is without teeth. This unit has sat for the last 5 years due to the carrier machine catching on fire. The attachment was unharmed in the fire. Hoses, belts and bearings all seem to be in good shape. The drum rotates freely and smoothly. A set of teeth are approximately $2,250, there are 30 of them and they are around $75.00 individually. My loss is your gain. Local pickup is preferred. Buyer is responsible for making shipment arraignments, we will help load item.
Up for Sale is this Morbell Logger 15 inch shear 3 wheeled 3 cylinder Deutz air cooled diesel Runs good starts good hydraulics work good everything works as it should one back tire new other tires ok Please feel free to ask any questions or come to view it. Buyer responsible for any and all shipping/pick-up
Good solid pair of covers for a Disston 2 man Chainsaw. Ships to the upper US 48 only ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13ea73bc5e6-0xfa-
NICE* RENS Model P-3000 Metal Detector For Logs Complete in Original Case Up For Auction Is This*NICE* RENS Model P-3000 Metal Detector For Logs Complete in Original Case. In good condition. This unit shows light to moderate wear commensurate with age and use in the field. Intended for heavy industrial use, we are auctioning this sturdy, well built metal detector with orginal power cord and instructions in heavy duty case. RENS metal detectors are known as some of the most durable and reliable units in the field today. PLEASE SEE PHOTOS AND/OR EMAIL FOR MORE DETAILS. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO ASK BEFORE BIDDING THANKS AND HAPPY BIDDING Company Background We have been in business for over 25 years and we value our customers and their business. We try to provide the best ... morecustomer service possible. We take our feedback score VERY seriously and are very proud of our POSITIVE feedback rating. We strive for five star rating from all our customers. Terms and Conditions- Payments must be received within 5 days of the close of an auction. Payments can be made via Paypal or by credit card.you can pay by phone with a credit card by calling our store at 330-898-4197- I try to answer all e-mail within a timely fashion. I'm in the office Monday thru Friday from 9am-5pm.You can contact me directly at matt at larryssuperpawnDOTcom if you have any questions or use ebay messaging to contact me. Please SERIOUS bidders ONLY.Non paying bidders will be turned into eBay for Non-payment to help recover some of the listing fees. We ARE NOT EXPERTS in any area. We try to describe our items as accurately and completely as possible. We ARE NOT PERFECT. We may not notice every detail or have knowledge of an item’s completeness. Refunds and price reductions will NOT be granted due to our oversight of a detail or lack of information. Most items we sell are in"used condition" and have been obtained from auctions and estate sales unless otherwise noted. Please Read the descriptions CAREFULLY be
SELLING A REGROUND CAMSHAFT FOR A CASE 430/530/580 DIESEL TRACTOR.CAM HAS NEVER BEEN IN A TRACTOR SINCE RECONDITION.CAN HAS A COATING ON IT SO IT DON'T RUST.BROWN SPOT'S ON IT IS NOT RUST. PART# IS A38890 ASLO FIT'S 630/ 470/570 WITH D 188 ENGINE
This probe is in excellent used condition. Maybe only used twice. Comes with all orginal equipment in original box. Has the 22" probe. Compare at $300 for a new one.
648GII dual arch 66x4300x25 tires Engine runs well. Transmission shifts well. Just put a diff lock pump on it and packed several cylinders. I just do not need it. Call or text 931-235-7426. Asking 28.000 Posted with
Altec TA-35 Boom with Bucket( 40 foot working height) Has a new motor and the Altec Boom is in good working order. The transmission or torque converter is making some noise in reverse. Therefore we are not making any warranties or representations, expressed or implied on the soundness of the transmission. It is recommended that a service specialist look at the transmission before it is taken on a extended trip. This purchase will be"AS IS"
3 Ford Tractor Manuals Vol. 1. 2& 3 1965-1975 You are bidding on 3 Ford Tractor Manuals Vol. 1. 2& 3 1965-1975 Photos are off color but the manuals are nice and white. Tractor Series-2000. 3000, 4000, 5000, 7000, 3400, 3500, 3550, 4400, 4500, 5500, and 5550. Reprinted Very good condition.No tears or pages missing. Some oil spots on covers. We attempt to be very careful to describe each item to the best of my ability. With photos and pictures. If I have made an error or missed something please contact me before leaving negative feedback. Happy to respond to any enquiry and we will always combine shipping on multiple purchases to save you $$. On many fragile items. We quote Priority Shipping as we find that fragile items often fare better in that class. However, if you'd prefer Parcel ... morePost or any other shipping option, we're happy to accommodate. Be sure to check out our store at this link: We ship Tuesdays and Fridays after payment has been received. Good bidding and thank you for shopping Quiet Canyon Mercantile. Immediate Payment is required. We will ship on Tuesday and Friday after payment is received. Thank you for looking and while you are here I hope you will check the many additional items we are offering this week. We will combine items for shipping. We pack fragile items very carefully. gsrx_vers_421(GS 6.0.9(421)
OLD VINTAGE LARGE HUBLEY# 500 ALUMINUM CAST TRACTOR. ABOUT 13x5x5 SIZE. HARD RUBBER WHEELS ARE 100% INTACT AND NOT BRITTLE FROM AGE. STEERING WHEEL TURNS RIGHT AND LEFT SMOOTHLY. FRONT PLOW BLADE GOES UP AND DOWN WHEN HANDLE IS MANUALLY USED. HAS ORIG PAINT. LARGE REAR METAL RIMS ARE PERFECT WITH NO SPLITTING. SELLING AS FOUND AS IS AS SHOWN IN PICS. SEE MY OTHER ITEMS TOO. U.S BIDDERS ONLY U.S SHIPPING ONLY. I COMBINE MULTI AUCTIONS TO SAVE YOU MONEY ON SHIPPING.
You are bidding on a 12 volt coil for you any of your tractors. This coil is in good working condition. The buyer pays $6.50 for shipping and we will combine shipping when and where it is possible(overseas and Canada will be more) We except all forms of payment including PayPal but its not preferred. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13ec00b839b-0xf8-
You are bidding on a breather for your 400 and 450 tractors. This breather is in good condition and is ready to be mounted on your tractor. The buyer pays $6.50 for shipping and we will combine shipping when and where it is possible(overseas and Canada will be more) We except all forms of payment including PayPal but its not preferred.
Tree Trimming poles Octagonal wooden poles with around a 23' reach. Nice for keeping in the truck because they break down to 6' lengths. Seymour Smith clip head. Ships to the upper US 48 only
1989 Ford F700 Diesel Chipper Truck. Tilting bed. Everything is in working order. New Interior upholstery. Clean! Engine is in perfect working condition. Ford Brazilian Engine. Only 64.400 miles on it! Truck is newly painted. Located in Freehold NJ. Must be picked up. Any questions call 908-415-9266- Bogie. I work throughout the day and don't check my emails until evening so the best way to contact me is by telephone in the evening. Payment is due on pick-up by cashier's check or cash. Seller reserves the right to cancel and end the auction early.
16 ft landscape utility dump body 16 ft x 8 x 4 ft high wood floor comes with the hoist and hoses bent rear beam doors wont open easy fix or can be fixed for buy it now price email me for particulars. Sides are in great shape. Pin to front of trailer 159" no reserve. Posted with
for sale I have a older 16 in drum wood chipper with a 4 year old 351 marine engine despite the looks this chipper is great. i also have a 1973 ford 1 ton that goes with it brand new paint job. Dump bed and an overall sturdy truck. i use to do tree work part time but since i have to travel for work i can no longer do any work.any questions call bill 724 679 7352 cash and certified bank checks only. items are for sale locally and i reserve the right to end auction at any time. local pickup only
This auction is for a CAT 6-Way Dozer Blade for Skid Steer. The blade has minimal wear. This is a 92" x 81" x 25" blade with 10 degree tilt and 30 degree max blade angle. Cat® Dozer Blades are designed for rough and finish grading in dirt and gravel. And light dozing. With their 6-way capabilities, dozer blades are better suited for finish grade work in construction and landscaping applications. Specifications taken from CAT are below: General Specifications Overall width 2342 mm Width(fully angled) 2049 mm Maximum blade angle(right/left of center) 30 Degrees Blade height 619 mm Work tool height 737 mm Work tool length 1028 mm Weight 528 kg Tilt 10 Degrees Cutting edge thickness 16 mm Related Equipment 259B Series 3- Compact Track and Multi Terrain Loaders 247B Series 3- ... moreCompact Track and Multi Terrain Loaders 279C Series 2- Compact Track and Multi Terrain Loaders 257B Series 3- Compact Track and Multi Terrain Loaders 277C Series 2- Compact Track and Multi Terrain Loaders 289C Series 2- Compact Track and Multi Terrain Loaders 287C Series 2- Compact Track and Multi Terrain Loaders 299D- Compact Track and Multi Terrain Loaders 299D XHP- Compact Track and Multi Terrain Loaders 216B Series 3- Skid Steer Loaders 226B Series 3- Skid Steer Loaders 236B Series 3- Skid Steer Loaders 242B Series 3- Skid Steer Loaders 246C- Skid Steer Loaders 252B Series 3- Skid Steer Loaders 262C Series 2- Skid Steer Loaders 272D- Ski Please see pictures. Please feel free to Call Timothy if interested at 205-928-2750 or contact him through eBay email. Inspections are welcome. All items are sold"as is" with a bill of sale. No warranties expressed or implied. Other pieces that fit skid steer also available and will be listed for sale are: 1) CAT T9B Trencher(very low hours: less than 50hrs- not just a chain. Has sharks teeth also) 2) CAT HM312 Mulching Head and(3) LandPride bushhog. Package deal available. Shipping is buyer's responsibility. We can assist with loading. Our transportation department will be h
This auction is for a CAT T9B Trencher for use on high-flow skid steers. The trencher is not just a chain. It has sharks teeth and very low hours. It has less than 50 hours of use. Cat® Trenchers are designed for cutting narrow straight trenches in the soil prior to laying electrical. Telephone and cable lines, or water and gas pipe. Trenchers are ideal for residential. Commercial, agricultural, building construction, lawn care and golf course maintenance. Designed for cutting narrow. Straight trenches in the soil prior to laying electrical, telephone and cable lines, or water and gas pipe. Direct drive system features a variable speed. Bi-directional, gerotor style motor for optimal chain pull and torque for maximum trenching performance. Durable double standard antibackflex chain eliminates ... morechain backlash and ensures teeth are positioned at the most efficient angle for smooth cutting and longer tooth life. Hardfaced. Tungsten carbide steel cupped teeth deliver long life in many soil conditions. Hydraulic side-shift provides close trenching flexibility near structures or obstructions Please feel free to Call Timothy if interested at 205-928-2750 or contact him through eBay email. Inspections are welcome. All items are sold"as is" with a bill of sale. No warranties expressed or implied. Other pieces that fit skid steer also available and will be listed for sale are: 1) CAT HM312 Mulching Head. 2) CAT 6-way dozer blade(minimal wear) and(3) LandPride bushhog. Package deal available. Shipping is buyer's responsibility. We can assist with loading. Our transportation department will be happy to quote bringing the item/items to you. Down payment of $1.000.00 is due within 24 hours of auction's close. The remainder of payment is due within 7 days of auction's close. Thank you for your interest.
Petzl ce oo82 used but still in perfect working condition this item still looks new. Free pick up or s/h 12.50. Questions about it 3042374950 I apologize for having to start back up fresh on EBAY but I just went through a divorce. and many more items to come to Ebay with no reserve. Posted with
This set of climbers is in overall great condition.added top for extra comfort. There is wear on the leather boot strap at the point that touches the spike on both straps but it is minor and has many hours of work left before you need to replace or repair the strap. All other wear is normal. The top straps are a heavy synthetic and look like they will never wear out. The leather pads and hold downs are good. Spikes are adjustable. The pictures should tell the rest. Buyer to pay $15.00 for shipping to any location in the U.S.A. Thanks and best of luck with your bidding!
Very nice Fransgard logging winch. Model V-2800. Serial# 134409. Used very little. Works 100% Feel free to contact Vic w/ any questions 717.423.6300. We will ship. Contact with your zip code& I will get you a shipping quote. We do need to charge 6% sales tax to PA residents& all local pickups.
This is a small trac o light lot with some hardware. 3 lights. 2 With new 12v lights. One wing. And some other hardware. All origanal. What u see in pic is what u get. selling as needind restoe but are in decent shape. Posted with the
Up for sale is a 1987 Landini 8880 4x4 Farm Tractor. With Hardy DL85 loader with quick attach. I have installed a brand new custom built HLA 84' bucket to the quick attach. This work horse was originally from a farm in Ohio, now I feel like this machine is too much machine for me. The hydrulics work as should, shifts, and runs perfect, four wheel drive works great, tires are in descent shape, this tractor is a turn key machine everything works. Very clean machine overall and clean cab. It has 80hp and 5,200 hours I currently use it for light brush hoging and clearing snow out of my long driveway, but again this is too much machine for me, this would make a real farmer a great work horse to their field. Please dont hesitate to ask questions, I want you to bid with confidence I always try ... moremy best to sell good items that is why my feedback is 100. At the end of the auction there will need to be paid through paypal a $500.00 nonrefundable deposit, and paid infull within 7 days of auction end in person not through paypal. There will be no shipping on my end but I will help you or your shipper to load it up.
For Sale is a Honda 2-1 Wet Clutch Gear Box I bought this unit just for the motor and have no use for the gear box. It was on a GX200 Honda Motor. It takes an oversize 22mm crank that is also available for an additional $45 It appears to be in great shape. The motor was in like new condition! Please see pictures for condition. I did not test but it looks mechanicly sound. You will need to cut a housing gasket or seal it with RTV The motor base gasket is with it and can be reused. Buy With Confidence!
You are bidding on the ELVEX PROVEST.with PROLAR PROTECTION size LARGE. This rugged SAFET vest is made to help protect the chainsaw operator. Here are the specs. CA28137 Elvex Prolar II Elvex Protection Fibers 100% Heavy Nylon top and bottom(orange and navy) Padded shoulders and chest.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ed6093e25-0x102-
Vermeer 1230A Wood Chipper. Bought new in 04' 1700 hours, 110 hp perkins diesel engine, great shape, works perfect, comes with 4 extra blades, new tires, 12" capacity auto feed, kept inside 90% of the time.
USED PRENTICE 210B HYDRAULIC PUMP, FOR PARTS OR REBUILD, STOPPED WORKING ON MY LOADER.REPLACED IT. TOOK THIS ONE APART TO SEE THE PROBLEM/ SOME WARE AND A COULPLE.BEARINGS WERE BAD. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13ed791c3f1-0xfb-
SELLING A USED CLUTCH BOOSTER FROM A INTERNATIONAL 1086.BOOSTER WORK'S GOOD.SHAFT'S GOOD. NOT PITTED. FIT'S SEVERAL TRACTOR'S 786.886,986,3588,3788,6588 AND MORE.PART# IS 113965C93
Up for Auction Antique Sawmill or Ice Block Saw Blade! 58 inches long by 10 inches wide by 2.5 inches wide about a quarter inch thick. Very solid& heavy. Great Estate Sale Find! Not sure what it fits. At the widest part of the bottom are two rectangular holes. Will ship in a heavy duty cardboard sandwich No Reserve. Check out my other auctions please Thank you so much!
Morbark Wolverine. Multi Utility Tractor or M.U.T. with Telescopic Boom Forestry Tractor Construction or Demolition& Recycling Industries. 3 Quick Change Attachments as shown. Brush Grapple, Shear and Bucket, The Telescopic Boom. 20 ft Vertical Reach. 14ft horizontal Engine: 4 cylinder 3.9 Cummins. 100hp) Tires Front: 23.1x26 Forestry. Rear: 18x19.5( 16ply) Measures. ~ 9ft wide x 11'3" x 9 tall( est. 14.000 lbs. not including attachments. Works Great. Runs& functions like it should well maintained. and used properly not abused Questions? Offers. $ Please e-mail or Call us for details. Tel# 503.512.5407 Toll Free: 1-866-380-3922 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. ... moreFirst come First Serve. DONT WAIT BID Today. MAY THE HIGHEST BID WIN!