|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Convenience and Comfort, the Operator Can Shovel Digging a 360 Degree Rotation. Engineer Type：44mm, Single Eylinder, Air Coling,2 Stroke. Starter System：hand Pull Start. It Is Easy to Fall When Standing Upright.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specifications: Displacement: 32.6CC Impact Frequency: 3200min-1 Impact Energy: 30j Power：1200w Max Torque and Speed: 1.5n.m/5000r/Min0.5l/H Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil) Fuel Tank Capacity: 0.9l Fuel Consumption Rate: ≤0.5l/H Max Drilling Diameter:40mm Starter System: Hand Pull Start Package Contents: 1x Gasoline Hammer Drilling Machine 3x Drill 1x Point Chisel 1x Flat Chisel 1x Toolkit 1x Oil Can (Empty).
0 bids Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dig up Soil Ball. Fuel: Gasoline/ 4 Stroke Engine Oil. Net Weight : 16.5kg (36.4 Ib). Engine Type: 40 30mm. Single Cylinder, Air Cooling, 4-Stroke. Power and Speed: 1.2kw/8500r/Min. Max Torque and Speed: 1.2nm/5500/Min.
0 bids Free Shipping
Condition: New Location: Chino, United States
This applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. It is suitable for electricians and carpenters. It is an ideal choice for electricians, carpenters, etc. Good Filtering Effect: The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life.
0 bids $120.00 Shipping
Condition: Used Location: , United States
It is designed to efficiently break through tough materials and surfaces, making it an essential tool in any contractor's arsenal.
Buy It Now
Free Shipping
Condition: Used Location: Woodstock, United States
Bauer 1631E-B 110Amp SDS plus Type Pro Demolition Hammer Kit.Item tested by seller works like new but as marks from previous use.
Buy It Now
Free Shipping
Condition: New Location: Newington, United States
Toku RB110. Rivet Buster Retainer Parts Kit fits jumbo size rivet busters. Includes: Upper Sleever, Lower Sleeve, Rubber Bumper, Retainer Spring.
Buy It Now
Free Shipping
Condition: Used Location: Phoenix, United States
This tool is perfect for contractors or DIY enthusiasts tackling heavy-duty projects. Only what is pictured is what is included.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
(Tamp and compact loose granular soils, gravel and sand. Drill Bit Type: Tamper Shank with Plate. hex shank). Tamper Shank with Plate. Shank Style: 1-1/8 in. Plate size: 6" x 6". Excluded AK, HI, PR, APO, GUAM, VI, or PO Box.
0 bids Free Shipping
Condition: New Location: Greensboro, United States
BY SKIDRIL. Skidril high quality design, materials and build make this a rel iable driver.
Buy It Now
$19.99 Shipping
Condition: New Location: Memphis, United States
Size:2200Watt perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! Input motor:2200 watt.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
JackHammer Breaker Clay Spade Cutter Chisel Specifications: --Material: 40Cr Chromium steel --Size: 30*440*135mm --Suitable type: suitable for 65/95 Jack hammer --Color: Silver Application: --Hammer shovel can only be used for vulnerable objects, such as concrete, stone, etc. Never for metal objects such as steel bars. Features: --Made of high quality 40Cr chromium steel as raw material --High temperature quenching greatly improves hardness --The product life is longer than that of ordinary carbon steel. --65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Hexagonal Edge Length: 30mm/1.18inch Length Of Diagonal Edge: 34mm/1.34inch Shank Diameter: 24mm/0.94inch Top Diameter Of Handle: 20mm/0.79inch Package included.
0 bids Free Shipping
Condition: New Location: Chino, United States
Suitable for Tearing up Foundations, Ripping up Driveways, Demolishing Re-enforced, Concrete Floors or Walls, Breaking Through Solid Rock, Etc. Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil). Starter System: Hand Pull Start.
0 bids Free Shipping
Condition: New Location: Chino, United States
Packing List: mer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Key Data Engineer Type：44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Impact Fregnency:1500bpm Impact Enengy: 20-55j Starter System：hand Pull Start Net Weight :20.5 Kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch）.
Buy It Now
Free Shipping
Condition: New Location: Memphis, United States
Size:2200Watt perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! Includes: 1-1/8" Bull Point Chisel, 1-1/8" Flat Chisel.
0 bids $3.00 Shipping
Condition: New Location: Chino, United States
JackHammer Breaker Clay Spade Cutter Chisel Specifications: --Material: 40Cr Chromium steel --Size: 30*440*135mm --Suitable type: suitable for 65/95 Jack hammer --Color: Silver Application: --Hammer shovel can only be used for vulnerable objects, such as concrete, stone, etc. Never for metal objects such as steel bars. Features: --Made of high quality 40Cr chromium steel as raw material --High temperature quenching greatly improves hardness --The product life is longer than that of ordinary carbon steel. --65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Package included: 1 x Jack hammer Clay Spade Chisel.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
It is widely used for tamping, stone breaking, digging trenches, tree transplanting, digging up soil ball, tree digging, asphalt removal, root cutting, house demolition, etc. Fuel: Gasoline/ 4 Stroke Engine Oil.
Buy It Now
Free Shipping
Condition: Used Location: Kansas City, United States
Used, very rough cosmetic condition, but works great. NO CORD, or bits included. Tools and hard case ONLY. No other accessories included. Power cord NOT included. Hardcase is very distressed, and has a few cracks, but still works. Will NOT ship to Hawaii, Puerto Rico, Alaska, a PO Box, or a APO / FPO (please contact me before hand and maybe we can arrange something). Ships next business day with signature confirmation upon delivery.
Buy It Now
Free Shipping
Condition: New Location: , United States
Harbor Freight / BAUER 12.5 Amp 23 lb. There are two different versions of the Bauer 1631E-B that use different brush parts. Item #:63440 uses a "spring" type brush. Item #:63437 uses a "no spring" type brush.
Buy It Now
Free Shipping
Condition: New Location: , United States
MAKITA GENUINE 411478-6 4114786 SWITCH BUTTON. LS1013 Miter Saw. LS1212 Miter Saw. BLS712 Miter Saw. BLS820 Miter Saw. LS0711Z Miter Saw. LS1020 Miter Saw. LS1030N Miter Saw.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Suitable for tearing up foundations, ripping up driveways, concrete floors or walls, demolishing re-enforced, breaking through solid rock, etc. Widely used in concrete, bricks, rocks, construction, and more.
0 bids Free Shipping
Condition: New Location: , China
It is intended for professionals. It is perfect for demolition, trenching, chipping, and breaking holes in concrete, block, brick, and tile. Reassuring Experience: The high-strength alloy chuck can withstand the strong impact of the demolition operation.
Buy It Now
Free Shipping
Condition: New Location: Eugene, United States
Open flow with a lock-on clamp make it easy for hands free tire inflation. open flow with a lock-on clamp make it easy for hands free tire inflation.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
For HM1307 HM1203C HM1317 HR5210C. OEM Genuine Makita Brush Holder Unit 632D00-2.
Buy It Now
Free Shipping
Condition: New – Open box Location: Albemarle, United States
Fits the Atlas Copco 47LA, BM Breaker Cobra, and Stanley BR37. Overall length is 13-1/2".
Buy It Now
Free Shipping
Condition: New Location: Brea, United States
Product Type: Chisel Bit. Include: 1pc. Shank Style: 1-1/8in.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specifications Material: Plastic, Aluminum, Iron Color: Black Engine Type: Single Cylinder Cooling System: Air Cooling Stroke: 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65L/ 0.17gal Max. Power And Speed: 1.2kw/8500r/Min Max Torque And Speed: 1.2Nm/5500/Min Fuel Consumption Rate: 0.47L /kw.h(0.12gal/kw.
0 bids Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Size & Weight: Overall Dimension: 24 13/16" X 10 5/8" X 10 1/4" (63x27x26cm) Engine Type: 36 X32mm; Single Cylinder; Air Cooling; 2 Stroke Net weight of the machine (excluding the weight of the drill) : ≈10.5kg3pcs Drill:22*350mm 1pc Point Chisel:18*350mm 1pc Flat Chisel: :16*280mm Specifications: Displacement: 32.6cc Impact Frequency: 3200min-1 Impact Energy: 30j Power：1200w Max Torque and Speed: 1.5n.m/5000r/Min0.5l/H Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil) Fuel Tank Capacity: 0.9l Fuel Consumption Rate: ≤0.5l/H Max Drilling Diameter:40mm Starter System: Hand Pull Start Package Contents: 1x Gasoline Hammer Drilling Machine 3x Drill 1x Point Chisel 1x Flat Chisel 1x Toolkit 1x Oil Can (Empty).
0 bids Free Shipping
Condition: New Location: Chino, United States
Gas Demolition Jack Hammer Concrete Breaker Punch Jackhammer w/ 2-stroke Motor Features: 3 in 1 multifunction gasoline demolition hammer Powered by 2-stroke motor, with exchangeable drill and chisel to suit your needs Hand pulls start system offering a high degree of flexibility without cable Portable and lightweight for easy handling operation and convenient transport Widely used in concrete, bricks, rocks, construction and more Size & Weight: Overall Dimension: 24 13/16" x 10 5/8" x 10 1/4" (63x27x26cm) Engine Type: 36 x32mm; single cylinder; air cooling; 2 stroke Net weight of the machine (excluding the weight of the drill) : ≈10.5kg 3pcs drill:22*350mm 1pc point chisel:18*350mm 1pc flat chisel: :16*280mm Specifications: Displacement: 32.6CC Impact Frequency: 3200min-1 Impact.
Buy It Now
Free Shipping
Condition: Used Location: Pottstown, United States
We have several units available. Bosch® 11335K; Dewalt® D25960K; Hitachi® H65SD2; Milwaukee® 5337-21; Makita® HM1317CB; Makita® HM1307CB.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
OEM Genuine Makita Switch 651128-3 6511283. For the following Makita tools.
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
Shovel Head Width: 4-1/4"(110mm);. Shovel Head Length: 6"(150mm);. Shovel Head Thickness: 5/16"(8mm);. Net Weight: 4.5LBS /PC;. Drop Forged, Heat treated,;.
Buy It Now
$4.20 Shipping
Condition: New Location: Bellflower, United States
OEM Makita switch dust cover, part number 421265-5.
0 bids Free Shipping
Condition: New Location: , United States
Pointed Chisel Size:(Length): 5/8. Flat Chisel Size: (Length) : 5/8. 1 x Point Chisel (Hex Shank). 1 x Flat Chisel (Hex Shank). Net Weight: 6.5kgs (14.30 lbs). 1 x Pot of Grease. 1 x Hex Key. We have warehouses in the USA, CA, and AU.
Buy It Now
$199.00 Shipping
Condition: New Location: Elkhart Lake, United States
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： This Gasoline Rock Drill is a High Efficient Drill Machine. It Adapt to Outside Situations Where There is No Water, No Electronic Power and No Air Compressor. It Can be used as a tool for Breaking, Percussive Drilling, Tamping Splitting or Ramming. Light Drilling tools, Only 27kg, Easy to Carry. Easy to Operate , Just Turn The Handle to Make It Work. Time and Labor Saving, Drilling Fast and High Efficiency. Used to Drill Vertical Downward Hole(Max Depth 6m) and and <45 Degree Upward Hole. Internal Combustion Rock Drill Use: The Internal Combustion Rock Drill Has The Functions of Splitting, Crushing, Tamping, Shoveling, Etc. for Mining, Cement Pavement, Asphalt Pavement, etc. It is Widely Used in Mines, Road Construction, Quarrying, National Defense Projects, etc. .
0 bids Free Shipping
Condition: New Location: Chino, United States
NOTE: This product is heavy and light, easy to fall in the vertical state, please pay attention to posture to avoid falling and damage the machine, due to falling products damaged, the company does not assume after-sale responsibility. Product key data Engineer type：44mm, Single eylinder, air coling, 2 stroke Fuel:mixing oil(gasoline 25, two-stroke engine oil 1) Fuel tank capacity:1.3L Displacement:52cc Max power and speed:1.9K W/6500r/min Max torque and speed:3.5N.m/5000r/min Consmption rate:≤0.6L/h Impact fregnency:1500Bpm Impact enengy:20-55J Starter system：Hand pull start Net weight :20.5 kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch） Cylinder diameter * stroke :44×34 mm(1.73×1.34 inches) spark plug model: BM6A.
Buy It Now
Free Shipping
Condition: New Location: , United States
MAKITA ORIGINAL CB416 CARBON BRUSH SET. FOR MODEL.
Buy It Now
$4.20 Shipping
Condition: New Location: Bellflower, United States
HM1202, HM1202C, HM1211B. 2702, 2703, 2704. OEM Genuine Makita Brush Cap Holder part number 643650-4. For Makita models MBS400, MBS401, MBS402. LS1212, LS1214, LS1214F, LS1216, LS1220, LS1221. LS1040, LS1040F.
0 bids Free Shipping
Condition: New Location: , United States
Compatible with the following: Bosch models: 11304, 11304, USH27 2 230v.
Buy It Now
Free Shipping
Condition: New Location: , United States
EK6101 Power Cutter. Makita Genuine 161395-7 Carburetor Complete. For Models.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power Source Custom Bundle Does Not Apply.
Buy It Now
Free Shipping
Condition: New Location: Memphis, United States
Size:2200Watt perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! No Load Speed: 1900 Impacts Per Minute(55j).
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
Input Power: 1100W;. Impact Energy: 15J;. 1 x Key Wrench;. Drill Capacity Dia.: 1-1/2"/38MM;. 1 x Heavy Duty Plastic Storage Case;. Bit Type: 17mm (5/8 in.). Hex Shank Bits;. Ideal for demolition/concrete jobsite, crushing; chipping; digging and squaring.
Buy It Now
Free Shipping
Condition: New Location: , United States
MAKITA ORIGINAL CB458 CARBON BRUSH SET. GA4534 Paddle Switch Angle Grinder. GA4030 4" Angle Grinder. JS1602 Misc. TM3010CX1 Multi-Tool Kit. FOR MODELS TM3000C Misc. TM3010C Misc.
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
OEM Genuine Makita Switch 651189-3 6511893. For the following Makita tools.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
GA9020, GA9030, GA9050. OEM Genuine Makita Switch 650101-0 6501010. GA7020, GA7021. For the following Makita tools.
Buy It Now
Free Shipping
Condition: New Location: , United States
2853-20 IMPACT DRIVER.
0 bids Free Shipping
Condition: New – Open box Location: Sarver, United States
Model: MC4 RD4. Alloy Steel Heat Treated Components. Shank: 0.680” Round. Weight: 17 lbs. BPM: 1,700. Quick and Easy Chisel Retention.
Buy It Now
Free Shipping
Condition: New Location: South Richmond Hill, United States
OEM Genuine Makita Armature Part# 516921-1 or 5169211 for HM1810, HM1801
0 bids $30.00 Shipping
Condition: Used Location: Schertz, United States
It works great. No personal markings. No bits or case included. We can resolve most any problem easily.
0 bids Free Shipping
Condition: New Location: Tupelo, United States
Integrated Staple Puller (also replaceable – 5/64” Allen Key). 35oz Milled Face. Small Staple Starter Head. Integrated “J” Hook Remover. Large Head for driving Lag Screws, “J” Hooks and Hard Heads. Longer Handle for 2 Handed Driving.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Enhance your demolition and chiseling job with this point chisel and flat bit set. Made with high-grade forged and heat treated steel for maximum durability. Designed to drill through concrete, dig up clay for backyard & garden landscaping.
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
Our compactor fits precisely into your rotary power drill with a 1-1/8" Hexagon shank to get your work done easily. Don't rely on a tool that might work when you can get a tool that will work. Why Choose VEVOR?.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Parameters: Machine Size：69*37cm (27.2*14.6 inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65L Max. Power And Speed: 1.2kw/8500r/Min Max Torque And Speed: 1.2Nm/5500/Min Fuel Consumption Rate: 0.47L /kw.h Scope of Application: 1.Rock breaking 2.Dig Up Soil Ball 3.Tree transplanting 4.Tree Digging And Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Your satis faction is our ultimate goal.
|
|
|
|
FOR SALE BOSCH 11209 HAMMER FOUND IN MY GRAND FATHERS STORAGE SHED SEEMS TO BE WORKING FINE VERY HEAVY DUTY. BVYER TO PAY SHIPPING 50.00 SOLD AS IS
|
|
|
Makita HM0870C Demo Hammer WITH CHISSEL BIT AND CASE AND MANUAL(WORKS PERFECT) SUPER CLEAN EXCELLENT SHAPE NO RESERVE WEIGHT IS 27LBS(TOTAL)
|
|
Hilti TE-706 Electric Jackhammer Description: This is a Hilti electric jackhammer in slightly used condition. Works perfectly. Comes in original case with two drill bits. These are not stock photos! These are actual pictures of the item for sale. Please review the photos as they show the exact item's condition you are purchasing. Shipping and payment terms: I strive for positive feedback and five star rating and will do whatever it takes to satisfy the buyer. Please contact me before leaving feedback if you have any problems or questions about your purchase. I accept PayPal exclusively. Payment must clear prior to shipment. After 5 days if no payment is received an eBay Unpaid Item Dispute will be filed· I will ship from California via USPS Priority Mail and will email you the tracking ... morenumber once the item ships. I ship to USA only· I do not ship to APO/FPO· I ship Monday– Friday& all items are in stock· I ship within 1 day after your payment is received Feel free to contact me with any questions! CHECK MY FEEDBACK- All buyers are very happy: I will leave you POSITIVE feedback upon payment. Thanks for looking– Chris
|
|
|
You are bidding on a used IR JDM30 rock drill Details: For use in a variety of wet or dry drilling jobs. Requiring holes up to 1-1/2 inches(38 mm) wide and 10 feet(3 m) deep in concrete or soft to medium rock. It is also light enough for horizontal drilling. It has an oiler and whip with fitting. Posted with
|
|
UP FOR AUCTION IS THIS PREVIOUSLY OWNED BOSCH HAMMER. this was previously sold and returned as the hammer isn't hammering well at all. this is being sold for parts. PLEASE SEE PICTURES ABOVE AS REFERENCE. PLEASE SEE PRODUCT INFO BELOW Model: 11312E Manufacturer: Bosch-s-b Power Tool Co. Type: Demolition Hammer Year: 1995 5 DAY MONEY BACK GUARANTEE IF YOU ARE NOT SATISFIED FOR ANY REASON. RETURN FOR A FULL REFUND WITHIN 5 DAYS OF RECEIVING ITEM. I ALWAYS TRY TO SATISFY THE CUSTOMER! PLEASE USE CONTACT SELLER BUTTON FOR ANY QUESTIONS YOU MAY HAVE. PLEASE FEEL FREE TO READ MY FEEDBACK! THANK YOU AND HAPPY BIDDING! PLEASE PAY ALL INVOICES WITHIN 4 DAYS OF ANY ENDED ITEM IN YOUR INVOICE. I WILL NOT COMBINE ANY INVOICES EXCEEDING A 3 DAY PERIOD. ANY DISCOUNT IS VOID AND WILL BE REMOVED IF ANY ... moreINVOICE IS UNPAID AFTER 3 DAYS. THIS DOES NOT INCLUDE THE TIME IT TAKES FOR E-CHECKS TO CLEAR) Please do not bid if you have negative feedback rating or no intention of paying. LOCAL PICKUP IS ALWAYS WELCOME.
|
|
|
HILTI TE 55 DEMO HAMMER DRILL USED HILTI TE 55 DEMO HAMMER DRILL. THE DRILL WORKS GREAT, THE MOTOR IS STRONG. I HAVE TESTED IT ON HAMMER AND ALSO HAMMER DRILL, AND IT WORKED AS IT SHOULD. IT SHOWS NORMAL USAGE, SOME SCRATCHES HERE AND THERE BUT NO CRACKS. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE DRILL. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13e165d39e9-0xf9-
|
|
Pneumatic Rock Spitter by Darda This rock splitter is in great running condition and comes with the hydraulic pump. Hose and a brand new set of spare splitting feathers as you see here in the photos! It will need to be shipped on a pallet.We can ship it on your Fed Ex account if you have one or we will ship it on ours. Call us or use contact seller to let us know if you are a residential location or a commercial location and also let us know your zip code and whether you have a forklift to get this off the delivery truck or if you need them to bring a lift truck. This unit and tool will both come with literature. Phase 1. First, a hole of a precise diameter and depth is drilled into the material. The wedge set(one wedge and two counter wedges) is inserted into the drill-hole. Phase 2. The ... morewedge is driven forward under hydraulic pressure, forcing the counter wedges apart with a force of up to 400 tons. The material splits within seconds. Phase 3. With enlarging counter wedges the split can be expanded to its maximum width. Reinforcing rods break or can be cut up with a suitable power tool. Darda Rock Splitter/ Emaco Inc. Model: RC#3 2842/3 Total Length: 39" Maximum Expansion 7/8" Hole requirement 1 5/16" Minimum Hole Depth: 18" Enormous splitting force up to 220 tons Dust free and near silent operation Vibration free Light weight Precision work Always controllable For use in close quarters and hard to access places. Easy handling Darda Pump/ Emaco Inc. Model: POVA Air 02 Height: 19 1/4" Width: 18" Depth: 12 1/2" Oil Capacity: 5 Gallons Motor: Air Motor requires 50-80 cfm at 100 P.S.I.
|
|
|
Thor jack hammer Model 40874t size 254 weight 90 LBS Tools have been removed from a working enviroment. We have tested the tools and they do function however we can not make any guarentees or promises on the longevity of the tools. Tools are being sold"As Is" Only returnable if not as described. Any questions please call 270-893-4095. Thanks for looking. Check out our other listings:
|
|
|
Bosch electric jack hammer 0 611 304 034 rolling cart 4 bits $999 CALL FOR A SHIPPING QUOTE Come see it or give us a call with any questions The Tool Consignment Store 560 New Park Ave West Hartford. CT 06110 860-263-7908
|
|
|
Cobra two cycle engine jack hammer/ drill Model 148; Made in Sweden; Distributed in US by Atlas Copco Used. Good functional condition with 7 different bits; wooden box, homemade jack stand to hold the jack upright for starting(very helpful) side handle added for carrying; instruction manual& parts manual Buyer pays shipping. Will be shipped freight collect via buyers preferred carrier. Can be picked up locally in Arden NC(near Asheville NC) If need be could be shipped in two different packages via UPS(would probably cost more than motor freight) Accept Paypal or MO(cash with local pick up)
|
|
|
Hi i am selling my Bosch Breaker Hammer with 2 attachments and one heavy duty extention cord 25' long. I have used it on clouple of jobs and its still works like new. I got a new just no longer need it. It has been very well taken care of Great tool. I have 100% feedback bid with confidance. If you have any questions please feel free to ask Thank You. Happy bidding.
|
|
UP FOR AUCTION: Bosch(0-611-304-139) Brute Breaker Hammer with 1 Heavy Duty attachments. GENERAL CONDITION: PRE-OWNED. WORKING CONDITION: GREAT. COSMETIC CONDITION: GOOD. BRAND NAME: BOSCH. MODEL# 0-611-304-139) COLOR: YELLOW. ITEM SPECIFICS: CONTAINS SOME HEAVY SCUFFS AND SCRATCHES FROM. ANY DEFECTS OR OBVIOUS DAMAGE: NO DAMAGE. THIS AUCTION INCLUDES: Bosch(0-611-304-139) Brute Breaker Hammer with 1 Heavy Duty attachments Only. EVERYTHING COMES AS SHOWN IN PHOTOS! AUCTION WINNER: WHEN YOU RECEIVE YOUR ITEM. PLEASE CONTACT US IF YOU ARE UNHAPPY WITH THE DESCRIPTION OF THE ITEM. WE HOPE TO EARN YOUR 5 STAR POSITIVE FEEDBACK THROUGH GREAT CUSTOMER SERVICE AND WE WANT YOU BACK AS A SATISFIED CUSTOMER AGAIN! THERE IS NO RESERVE! Check out my! Be sure to add me to your! AUCTION DETAILS: ALL BIDS ... moreARE FINAL! THERE IS NO RESERVE! PAYPAL ONLY! PAYMENT MUST BE RECIEVED WITHIN(3) DAYS OF AUCTIONS END OR I WILL RE-LIST THE ITEM AND TAKE ACTION THROUGH EBAY! PLEASE. SERIOUS BIDDERS ONLY! I DO N OT CANCEL AUCTIONS OR BIDS! SHIPPING INSIDE THE U.S. ONLY TO CONFIRMED PAYPAL ADDRESS ONLY! NO EXCEPTIONS! NO INTERNAIONAL SHIPPING! NO EXCEPTIONS! IF ANY PROBLEMS ARISE AFTER THE END OF THE AUCTION. PLEASE CONTACT ME HERE. DIRECTLY ON EBAY, NOT VIA E-MAIL! I ALWAYS TRY TO KEEP MY CUSTOMERS HAPPY AND EARN 5 STAR POSITIVE FEEDBACK IN RETURN! I AM ALSO WILLING TO ANSWER ALL YOUR QUESTIONS BEFORE THE AUCTIONS END WITH AT LEAST(1) DAY NOTICE. GOOD LUCK!
|
|
|
CHICAGO ELECTRIC DEMOLITION HAMMER#93853 120v 1500w 20A start up- 9.5A no load- 13A with load 900-1800bpm- variable speed quick release retainer BULL AND SPADE CHISELS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e176fd6c2-0xfe-
|
|
|
Makita HM1202C USED Demoltion Hammer tool. And case. It comes exactly as you see it in the pictures and it is free from any issues. Damage and not reconditioned. Ultra strong 120 V. 13 amp motor Very smooth and it offers variable speed function. 950- 1900/ min. Will ship usps or Fed Ex
|
|
|
This is a good used ingersoll rand jack hammer 90# Works good. Model PB8A. 1-1/4" Hex. Posted with 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13e1778fb3a-0xf3-
|
|
Jack Hammer Spade 18-1/2" Long. 3" Wide, 1-1/8" Shaft This listing is for(1) Jack Hammer Spade USED. ShelfG15 031310JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ... moreACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
|
|
Hitachi H 45SB2 Demolition Hammer w/ 2 Chisel Bits& Case Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Make: Hitachi Model: H45sb2 Condition: Rough/Very Rough- This item is heavily used. But still works. This item will likely have heavy scratches and wear throughout as well as various other cracks/damage and cosmetic wear. Auction includes: Hammer with 2 chisel bits and case. Guarantee: 30 Day satisfaction guarantee 33772.1 1332 KH Order: 18710 We are only able to accept PayPal payments it's secure and offers the most protection to buyers and sellers alike. PayPal also gives you the flexibility to pay with your checking account. Debit, or credit cards. Payment is expected within 8 days. Sales tax must be collected for all Texas. Tennessee, Illinois, ... moreWashington, Nevada, and Florida buyers. We are unable to accept orders from resellers. We can only ship to addresses in the contiguous US(48 states) This item will be shipped via UPS ground. Shipments will only be made to confirmed PayPal addresses. Our goal is to ship within 24 hours of PayPal receipt of payment. And we guarantee it will leave our store within 2 business days. Insurance and delivery confirmation is included for all items and is calculated into the shipping charge. Shipping time with UPS ground is generally 2-6 business days, we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's expense, so please email any special requests, and we'll try to get you a quote within 24 hours. We currently ship from multiple locations in the states of Texas, Tennessee, Illinois, Washington, Nevada, and Florida. We can sometimes combine shipping and reduce the rate if you win items from the same location. Please see the three to four digit store identifier at the bottom of the description, and email prior to auction end for a quote on reduced shipping. We will do the best to accurately describe the item in the listing. Please feel free to emai
|
|
This listing is for a Chicago Pneumatic/ Boyer Air Hammer. Model No. 90. It has a 1-1/16" bore x 9" stroke. This tool is approximately 1950 vintage. It belonged to the owner's father and was used on personal projects for concrete and brick demolition. Listing is for the air hammer only- it does not include chisels or any other accessories- Sold As Is. From what I can tell. It looks like parts are still available online. Hammer was in working order when it was last used- it's been sitting on a shelf for years and the chisel got misplaced. I hooked up an air line and got a hissing noise when pulling the trigger. The owner believes it needs a chisel to be installed for it to operate- I'm not familiar with this tool, so I don't know. Please contact us with any questions- ... moreThanks for looking! We charge 8.25% sales tax for all items shipping within Illinois. Including local pickups. Tax exemption is available if we are provided with a valid Illinois resale certificate.
|
|
CALL BEFORE YOU BUY IT NOW* I HAVE 3 DEWALT HAMMER FOR SALE THEY ARE ALL IN ABOUT THE SAME CONDITION. WITH FEW SCRATHCED AND NICKS ON THE SIDES THEY ARE ALL LIKE NEW. WE PURCHASED THEM TO RENT IN APRIL AND BUY NEW ONES EVERY YEAR TO KEEP STUFF UPDATED. THEY COME WITH A CART AND 2-3 BITS. DEPENDING WHAT WE HAVE LEFT. WE THINK THEY ARE A GREAT HAMMER AND ARE BETTER THAN THE BOSCH HAMMERS. I CAN SHIP. SALES TAX IS DUE UNLESS SHIPPED OUT OF STATE. ADDITIONAL INFO AVAILABLE ANY ADDITIONAL QUESTIONS PLEASE ASK. OR CALL RYAN AT 724-887-9375 THANK YOU FOR YOUR BUSINESS*ATTENTION BUYER* ALL ITEMS SOLD AS-IS. WHERE-IS*ALL SALES FINAL* EQUIPMENT SOLD WITH A BILL OF SALE* ALL SHIPPING COSTS WILL BE COVERED BY THE BUYER.SELLER WILL LOAD PURCHASED EQUIPMENT AT NO CHARGE TO THE BUYER.SELLER WILL ALSO HOLD ... moreTHE ITEM UP TO 30 DAYS AT NO CHARGE TO THE BUYER. THE BEST PLACE TO GET SHIPPING QUOTES IS FROM FREIGHTQUOTE.COM OR USHIP.COM· WE DO HANDLE SOME LOCAL DELIVERIES. WITH-IN OUR AREA. ANYONE WHO CARES TO HANDLE SHIPPING WITH THEIR LOCAL COMPANIES OR AFFILIATES ARE WELCOME TO DO SO. PICK UP CAN BE ARRANGED ANYTIME THROUGH OUT THE DAY BY PRE- ARRANGING IT WITH US. ANYONE IS WELCOME TO COME TO OUR PHYSICAL LOCATION TO TEST OUT ANY OF OUR EQUIPMENT FOR SALE.WE ARE LOCATED AT 1 WEDDING LANEMOUNT PLEASANT. PENNSYLVANIA 15666, APPROX 48 MILES SOUTHEAST OF PITTSBURGH, IN THE SOUTHWESTERN PART OF THE STATE· PENNSYLVANIA SALE TAX IS 6%IF YOU PICK UP EQUIPMENT AT OUR YARD. UNLESS TAX EXEMPT, YOU MUST PAY SALES TAX.IF EQUIPMENT IS SHIPPED OUT OF STATE, THEIR WILL BE NO SALES TAX· ANY QUESTIONS CONTACT US AT 724-887-9375· FINANCING– CONTACT WWW.BANKCAPITAL SERVICES.COM FOR PAYMENT PLANS AND OPTIONS
|
|
Extremely low-hour. This is the latest and greatest in light weight demolition- it was released to the market this past spring. We have tested it a n d it is ready to rip and priced to sell. Dimensions(LxWxH) 564 x 125 x 248 mm, Rated input, 1300 W, Weight according EPTA-Procedure 01/2003, 7.9 kg, Single impact energy, 11.5 J, Full hammering frequency, 2760, Width, 125 mm, Chuck type, TE-Y, Triaxial vibration for chiseling in concrete, 6.5 m/s², Uncertainty(K) for triaxial vibration value for chiseling(ah.CHeq) 1.5, Mains frequency, 50-60, Service indicator, Yes, Radio and television interference suppression, Yes, Working modes, Chiseling A-weighted emission sound pressure level acc. EN 60745, 86, A-weighted sound power level acc. EN 60745, 97, Uncertainty for the given sound level acc. ... moreEN 60745, 3, AVR- Active Vibration Reduction, Yes, Approvals, IEC 60745-1 IEC 60745-2-6 EN 60745-1 EN 60745-2-6 UL/CSA 60745-1 UL/CSA 60745-2-6 On/Off switch, Yes, Interference immunity, Yes, Package content, Tool.
|
|
You are looking at a Kango 900. It is used. But in excellent working condition. It includes everything shown in the pictures. As shown in the pictures. 800x600 Manufacturer’s Description. The Kango 900 is the well-proven performer with an excellent power to weight ratio. A must for every contractor. Powerful 1.600W motor. Blow Energy: 7-27 Joules. Blow Rate: 950- 1.900bpm. Weight 11kg with Spade Handle. AVS(Anti Vibration Technology) Softgrip on all handles. Service Display& Cut-Off Carbon Brushes. Lock-on Function. Takes 21mm K-hex points& chisels. Dust Shield& Grease. Ideal for usage with generators. Digitronic- Fullwave Electronics for precise power adjustment to application. In-Line Motor Design for user comfort in below waist applications. Automatic Lubrication System for ... morelonger lifetime. Fiberglass reinforced polyamide housing combined with Metal Gear Box ensures outstanding reliability. Extreme long run-time thanks to New Carbon Brush Technology. Heavy Duty Milwaukee designed motor for enhanced reliability. K-Hex: the most durable tool-reception. Applications• Cutting/Breaking concrete. Masonry, brick or asphalt. Toothing of walls• Fllor cleaning/ Scraping. Tamping concrete. Ballast or soil. Vibrating. Dry Packing. Driving earthing electrodes. FEATURES and SPECIFICATIONS are taken from manufacturer sites and should be subject to verification* Shipping rates applies to the Lower 48 states only. All sales are sold as is. Please ask all questions before you bid. Sorry. There are no local pick ups. ITEMS CAN NOT BE SHIPPED TO P.O. BOXES. Items are shipped out on Mondays and Thursdays. Please note; if you are paying with Paypal; I will only ship to Paypal CONFIRMED addresses. If you do not have a confirmed Paypal account. Please pay with one of the other methods listed. Return Policy: Buyer must return item within 14 days after receiving the item. We'll provide a full refund minus the cost of shipping. Items must be returned in the same original condi
|
|
ItemDescription THIS IS A N AUCTION FOR A PIONJAR OR BEREMA 120 GAS POWERED ROTARY HAMMER WITH CRATE AND T HRE E ATTACH M ENTS. sEEMS TO BE IN GREAT SHAPE. STARTED FINE SEVERAL YEARS AG O. HAVE NOT ATTEMPTED RECENTLY. AS I S. ALSO PLEASE SEE OUR MANY OTHER QUALITY TOOLS IN OUR EBAY STORE. INTERNATIONAL CUSTOMERS PLEASE READ THE SPECIAL NOTES BELOW. Payment We accept the following payment method: Paypal Payment is required within 5 days of auction ending All Georgi a Residents must pay 7% state sales tax when checking out or wait for invoice to be sent to you before paying or your item will not ship. Shipping Shipping Info: $75 shipping anywhere in the continental US Item will be securely packaged and shipped via Fed-Ex Ground Item will ship out within 3 business days after received payment(typically ... morewithin 48 hours) We only ship internatio nal if buyer agrees to pay cost of shipping and all associated fees! Additional Information*PLEASE READ! This item is SOLD AS-IS and non-returnable with no warranty either implied or expressed by seller. We reserve the right to end any auction due to ebay.com technical difficulties Bidding and purchasing this item. The buyer agrees to hold harmless against damages,injury or death caused by this item. Buyer also agrees to release seller from any and all liability of the purchase, ownership, possession and or misuse of the purchased item described above. WE DO-NOT END AUCTIONS EARLY. PLEASE DO NOT ASK!
|
|
|
This is a Kango 950 jackhammer. It is being sold as-is. For parts or repair. This unit has a couple stripped gears in it. The long rod that runs up from the motor to the hammer at the end of the unit, is stripped at the end, and the piece it meshes with is also stripped. I have had it opened and seen the damage, and put it back together, and have decided to sell it as-is rather than pursue repair. The motor is fine however. It is strong and runs fine. If it weren't for these stripped gears, this unit would work fine with no issues, other than the external wear, as seen. It does also have a bit with it. Not pictured, which will be included to the winning bidder.
|
|
|
30 lb demo hammer with clay spade and chisel. Nice US made tool 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e3b6884d7-0xff-
|
|
|
YOU ARE BIDDING ON A USED APT MODEL 160 60LB 1-1/ 4" SHANK JACK HAMMER. THE JACK HAMMER IS FULLY FUNCTIONAL AND IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
STANLEY HP-1 HYDRAULIC PUMP 378 HRS WITH BREAKER HONDA 20HP STANLEY HP-1 HYDRAULIC PUMP 378 HRS WITH BREAKER HONDA 20HP. HAMMER HITS WITH 70- 90 LBS. LOW HOURS 378. STARTS RIGHT UP NO ISSUES OR LEAKS. IN GREAT WORKING CONDITION. READY TO GO TO WORK. PLEASE EMAIL OR CALL WITH ANY QUESTION 718-698-8400. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ... moreARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
Tools Hilti TE505 Breaker/Demolition Hammer Well-used but appears to be in working order. Power-tested OK. Includes the breaker. The case and the bit shown. The tools that I have up for auction belonged to a relative who passed away recently. We package well and ship quickly. We will also discount for combined shipping when possible. We will refund the difference via PayPal if shipping is less than calculated by the eBay shipping calculator. Payment or communication is expected within three days of the close of the auction. PayPal is the preferred method of payment. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Up for sale this Pneumatic Pavement Breaker Demolition Hammer Kent 20R Jack Hammer great working condition. Please see pictures for more detail.
|
|
|
YOU ARE BIDDING ON A USED JACK HAMMER 1-1/8" X 6" HEX SHANK SPADE CHISEL BIT. THE BIT IS IN GOOD USED CONDITION AND WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
|
This is a used Bosch11314 EVS demolition hammer in good condition.These are pictures of the actual tool you will receive
|
|
|
THIS IS A VERY LIGHTLY USED 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e65ab114e-0x103-
|
|
|
This rock drill came from a construction company that went out of business. Condition is unknown. Don't have a compressor big enough to run it, so it sells as is. I can ship it anywhere in continental USA for $80. It is heavy, weighs about 80 pounds. No bit, it takes a 1 1/8" hex Posted with
|
|
|
HELLO FOLKS. TODAY I AM SELLING MY HILTI TP 800 DEMOLTION ROTORY HAMMER/ JACK HAMMER. IT COMES WITH HAMMER/ CASE/ AND 3 BITS. 2 POINTY AND 1 FLAT BIT FOR A TOTAL OF 3 BITS. ITS BEEN A WHILE SINCE I HAVE BOUGHT BITS BUT THE LAST TIME I BELIVE ITS AROUND $100 A PEICE. THIS IS A VERY NICE HAMMER AND WORKS GREAT AND COMES WITH CASE. THESE ARE VERY STRONG AND YOU WONT BE DISSAPOINTED. THIS IS SELLING WITH NO RES AND WILL GO TO THE HIGHEST BIDDER. THANKS FOR LOOKING AND GOOD LUCK. HAVE A GREAT DAY.
|
|
|
In this auction Ad I am listing a Demolition Hammer. Brtand: Hitatchi Model: H651-1/8" Discription: Pre-Owned condition Lots of wear from use does not affect useability. Works and functions as it should. Hammer crushes concrete.Groves and channel digs in concret,asphalt and gravel roads. This model is also capable of cutting asphalt for road construction and repair. NO LATCHES on CASE{GRD} Attention. International bidders please contact prior to bidding for a shipping quote. Please provide postal code. Thank you.
|
|
Up for bid is a PRE OWNED HILTI 706 TE Demolition Hammer. Good condtion& full working order. Used sparingly. Will only ship to confirmed PayPal addresses. We do not ship to Alaska. Hawaii, Puerto Rico, nor Internationally. Email me if you have less than 10 feedback rating. Shippment will require a signature confirmation. Buyer will receive item as pictured Buy it Now from a trusted seller Thanks For Looking I do my best to describe items in great detail and use quality photographs. So if there are any questions, PLEASE email and ask before you bid. Feel free to email me with any questions through my E-Bay member account and I will do my best to answer. I will take additional pictures upon request and e-mail them to you as well! Comes as seen is photo. Please check out my other items up ... morefor auction as well as my store. SquareTrade © squaretrade warranty v2.0
|
|
|
BOSCH DEMOLITION HAMMER* MODEL: 11316EVS DEMOLITION HAMMER IS USED& TESTED. WORKS GREAT! HAMMER SHOWS SIGNS OF WEAR ALL AROUND COMES WITH ONE BIT PLEASE SEE PICTURES FOR COSMETIC CONDITION& FURTHER DETAILS INSURANCE AVAILABLE UPON REQUEST ONLY!
|
|
|
Excellent condition. Extra bit and 50 ft hose free. Posted with
|
|
This auction is for a Bosch 11316EVS SDS-Max Demolition Hammer Breaker 11316 EVS. Great used condition. Shows signs of use. Muddy with normal scratch and scuff marks. We usually ship items the next business day after auction has been paid for. This item ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If the error is our fault we will gladly cover all costs, original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds ... moreof items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e810d5fa2-0x104-
|
|
CLEVELAND PRO 78 ROCK DRILL. 7/8"x3 1/4" Comes with one threaded rod. 7/8" x 3 1/4" one threaded rod 7/8" x 4 1/4" one tapered rod, 7/8" x 3 1/4" one long 3/4" bit with 7/8" x 3 1/4" shaft. Also, with 9, 1 1/4" bits for the tapered shaft, 6, 1 3/8" bits for the threaded shaft, and 2, 2 1/2" bits for the threaded shaft. We are having an overstock and doubles equipment sale. We have 50+ pieces we will be selling. Most of the items are in good to like new condition. PLEASE SEE ALL PHOTOS. ALL ITEMS ARE SOLD AS IS. NO WARRANTIES OF ANY KIND ON ANYTHING. If you have a Zero(0) feedback. Call before bidding or bid will be canceled. Pickup only items: Pickup location is: BEVERLY RENTAL DEPOT 131 5 TH ST, BEVERLY. OH 45715 M-F 7am– ... more4pm. Sat. 8am- noon If buyer wants item shipped. Buyer will send us bill of lading at FAX 740-984-2607. We have loading facilities. And will assist with palletizing, and loading free of charge. We will NOT quote shipping. Arrange shipping, or pay for shipping. period) Shipping: Items with shipping charges will be shipped 1-3 days after payment has been received via UPS or USPS. UPS will not ship to PO Boxes. We do not ship out of the USA. Payment: We accept Paypal. We will accept green money if picking item up. Other forms of payment may or may not be acceptable. Please check before bidding. Starting Price is the RESERVE. Some items are for sale locally also. We will not cancel an EBay auction if there is a bid. If an item has no bid. We reserve right to sell locally and end auction. So bid fast to prevent local sale. All items to be paid within 10 days of auction end. If not paid. Item will be relisted. Return Policy: If you have an issue with our items. Contact us immediately by PHONE at 740-984-2517. We will work with you to resolve any issues in a manner that is professional and in accordance with all provisions herein. Any other questions please contact us at 740-984-2517.
|
|
On offer with a BUY NOW PRICE is a late model Wacker BH24 Petrol Powered Jack Hammer Breaker. It is a quality machine manufactured by Wacker in Germany and is powered by a Wacker 2-stroke petrol engine and has a working operating weight of 26kg. The RRP for this Wacker BH24 Petrol Powered Breaker is $4 986. GST is included in the sale price and a tax invoice will be supplied to the winning bidder. To see a YouTube video of a simular Wacker BH24 Breaker please go to the folowing link below. Additional Information New Wacker Concrete Equipment: Wacker Neuson: BH24 Petrol Breaker. Powered by Wacker WM80 1.7kW Petrol Engine. Weight without Tool: 26kg. Shank: 28 x 160mm. Percussion Rate: 1250 blows/min. Single Stroke Impact: 65 J. Fuel Tank: 1.8L. Machine Size without Tool: 905mm L x 492mm W x ... more346mm H. RRP $4875 http:www.youtube.com/watch?v=8cawwMxGzRY PICK UP LOCATION IS IN AUSTRAL NSW 2179 WE CAN ALSO ORGANISE DELIVERY AUSTRALIA WIDE AT BUYERS EXPENSE FOR FURTHER INFOMATION OR TO ORGAISE AN INSPECTION PLEASE CONTACT VIC ON 0404130864. THANKS
|
|
|
You are bidding on a used Bosch demolition hammer. Needing repair or for parts. Comes with 2 metal cases. Not shown. 3302 TW WHAT YOU SEE IN THE PICTURES IS WHAT YOU WILL RECEIVE. NOTHING MORE. NOTHING LESS. We are selling the entire equipment of a closed construction company. Email if you are interested in multiple items- many are very heavy and shipping costs per item will be prohibitive; but together may be feasible. Everything that can be tested has been and is noted. Items using 220 volt or using gas we are not able to test. No Returns on these items. Please bid accordingly. If you are local. Please call or email to arrange inspection before bidding, or to discuss what additional items we have. BOTTOM LINE LEVERAGE. LLC 3122 BRINKERHOFF RD. KANSAS CITY. KS 66115 913.233.0365
|
|
|
Wacker- Werke Model BHF 30 S/ A Demolition Hammer WM 80 Motor Gas Powered Weight 30 KG Made in Germany Preowned in good working condition just some grease on hammer as can be seen in pictures Owners Manual For Engine Included
|
|
|
Hello you are Bidding on a Pre Owned Hitachi Demolition Hammer H 45SB Being sold for parts Reason is. It does not provide the hammer action it should. Starts when trigger is pulled but does not hammer. has wear and tear and scratches and dents all over item Needs to be fixed! As Is On May-08-13 at 22:52:38 PDT. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e90dc3ea2-0xff-
|
|
The item for bid is a Makita Breaker Hammer Jackhammer with Cart and 3 Hammer Attachments As you can see in the photos. This Jackhammer has had a lot of use. It is in good strong solid working condition. Though, and is ready to go! This is an excellent opportunity to get a good pro- quality tool at a great price! Local Pickup ONLY Please see auction photos. As upon completion of this auction you will receive exactly what is pictured. If you have any questions or concerns. Please do not hesitate to contact us via email. Thank you for reviewing our product. We appreciate your time! Good luck bidding! 99% positive feedback rating on over 8000 transactions! New Mexico residents are required to pay sales tax of 7% Local Pickup is available ONLY IN ALBUQUERQUE. NEW MEXICO Paypal verified Quality ... moreitems listed everyday- 99 Cent No Reserves Listed Often! Shipping Combined when Possible. No Exaggerated Shipping Cost! Tracking& Signature Confirmation Provided on all Shipments We reserve the right to restrict delivery to PO Boxes. Alaska& Hawaii when USPS is not an option. We do not ship to APO/FPO addresses. U.S. Territories including: American Samoa, Guam, Northern Mariana Islands, Puerto Rico, and U.S. Virgin Islands. NO international shipping! No exceptions! Note that many of our items are now eligible for an extended service warranty from SquareTrade! Just look for the SquareTrade banner in the listing OUR PROMISE TO YOU! We strive to provide an outstanding Ebay buyer experience. Our 99% Positive Feedback on 8000 transactions speaks for itself. Our goal is to make the listing as accurate as possible. To the best of our knowledge& provide photos that clearly indicate the condition of the item, including all defects. Should you have any questions, comments or concerns, regardless of when during the auction process, please do not hesitate to email us via Ebay messaging. Our shipping department packages each item very diligently. Packages are then shipped out in the order in which payments were received. USPS da
|
|
SULLAIR MPB 90A 1 1/8" BREAKER! HAVE A FEW DIFFERENT MODELS IN STOCK! PLEASE VIEW OUR OTHER LISTINGS! MPB-90A Paving Breaker Our direct-impact. Non-corrosive automatic valve design with its one-piece housing dramatically reduces air consumption. You can operate multiple tools from a single compressor. INFORMATION High-Wear Parts Reduced, No Tappet System, One Piece. Non-Protrusive Housing, Minimal Lubrication Required, Direct Impact Piston, Parts Interchangeability, Quieter, Smoother Operation, Improved Latch Design, Less Air Consumption, FEATURES Weight 92 lbs. Length 27 1/2" Bore& Stroke 2 7/16" x 5 9/32" Impact Rate 1380 blows/min. Air Consumption 62 cfm(1.8 m 3/min. 29 l/s) Air Inlet Diameter 3/4" NPT, Shipping Weight 97 lbs. Chuck Size 1 1/8" HX x 6" ... more1 1/4" HX x 6" OUR COMPANY IS DOING A SUBSTANTIAL UPGRADE TO OUR TOOL& EQUIPTMENT COLLECTION! THEREFORE WE ARE CLEARING OUT ALOT OF OUR EXCESS TO EBAY. FROM JUST ABOUT ANY TOOL YOU CAN IMAGINE! ID BE WILLING TO BET WE A HAVE IT FOR SALE! FROM BOBCATS. FORK LIFTS, COMPANY TRUCKS, BUCKET TRUCK, DUMP TRUCK, TRAILERS(FLAT BED AND ENCLOSED) GREENLEE 555,SCIZZORLIFTS, C&C MACHINES, LATHES, MILLS, ANY DRILL, SAW, BIT YOU CAN THINK OF MIXERS, SAND BLASTERS, SULLAIR TOW BEHIND AIR COMPRESSOR WITH JACK HAMMERS! MAJORITY OF OUR TOOLS, PROBABLY 99% WERE PURCHASED BRAND NEW(UNLESS NOTED OTHERWISE) WE ARE NOT A"BUY AND RESALE COMPANY" ALL OF OUR INVENTORY WAS PURCHASED TO USE ON SPECIFIC JOBS! ALL TOOLS& EQUIPTMENT HAVE BEEN USED BY OUR EMPLOYEE'S AND WILL BE SOLD AS IS NO RETURNS! EVERYTHING IS TESTED AS FAR AS MAKING SURE POWER WORKS AND A SIMPLE JOB TASK TEST! PLEASE CHECK OUR OTHER LISTINGS AS WELL! IF NOTHING INTEREST YOU PLEASE SAVE US AS A FAVORITE! THANK YOU FOR STOPPING BY AND HOPE TO SEE YOU AGAIN REAL SOON! WE WILL SHIP OUT YOUR PACKAGE THE SAME DAY OR THE FOLLOWING DAY! WE ARE LOCATED IN MANTECA CALIFORNIA! FEEL FREE TO EMAIL/ CALL/ OR TEXT 209-643-9414. PLEASE DO NOT ASSUME ANYTHING! PLEAS
|
|
SULLAIR MPB 90A 1 1/4" BREAKER! HAVE A FEW DIFFERENT MODELS IN STOCK! PLEASE VIEW OUR OTHER LISTINGS! MPB-90A Paving Breaker Our direct-impact. Non-corrosive automatic valve design with its one-piece housing dramatically reduces air consumption. You can operate multiple tools from a single compressor. INFORMATION High-Wear Parts Reduced, No Tappet System, One Piece. Non-Protrusive Housing, Minimal Lubrication Required, Direct Impact Piston, Parts Interchangeability, Quieter, Smoother Operation, Improved Latch Design, Less Air Consumption, FEATURES Weight 92 lbs. Length 27 1/2" Bore& Stroke 2 7/16" x 5 9/32" Impact Rate 1380 blows/min. Air Consumption 62 cfm(1.8 m 3/min. 29 l/s) Air Inlet Diameter 3/4" NPT, Shipping Weight 97 lbs. Chuck Size 1 1/8" HX x 6" ... more1 1/4" HX x 6" OUR COMPANY IS DOING A SUBSTANTIAL UPGRADE TO OUR TOOL& EQUIPTMENT COLLECTION! THEREFORE WE ARE CLEARING OUT ALOT OF OUR EXCESS TO EBAY. FROM JUST ABOUT ANY TOOL YOU CAN IMAGINE! ID BE WILLING TO BET WE A HAVE IT FOR SALE! FROM BOBCATS. FORK LIFTS, COMPANY TRUCKS, BUCKET TRUCK, DUMP TRUCK, TRAILERS(FLAT BED AND ENCLOSED) GREENLEE 555,SCIZZORLIFTS, C&C MACHINES, LATHES, MILLS, ANY DRILL, SAW, BIT YOU CAN THINK OF MIXERS, SAND BLASTERS, SULLAIR TOW BEHIND AIR COMPRESSOR WITH JACK HAMMERS! MAJORITY OF OUR TOOLS, PROBABLY 99% WERE PURCHASED BRAND NEW(UNLESS NOTED OTHERWISE) WE ARE NOT A"BUY AND RESALE COMPANY" ALL OF OUR INVENTORY WAS PURCHASED TO USE ON SPECIFIC JOBS! ALL TOOLS& EQUIPTMENT HAVE BEEN USED BY OUR EMPLOYEE'S AND WILL BE SOLD AS IS NO RETURNS! EVERYTHING IS TESTED AS FAR AS MAKING SURE POWER WORKS AND A SIMPLE JOB TASK TEST! PLEASE CHECK OUR OTHER LISTINGS AS WELL! IF NOTHING INTEREST YOU PLEASE SAVE US AS A FAVORITE! THANK YOU FOR STOPPING BY AND HOPE TO SEE YOU AGAIN REAL SOON! WE WILL SHIP OUT YOUR PACKAGE THE SAME DAY OR THE FOLLOWING DAY! WE ARE LOCATED IN MANTECA CALIFORNIA! FEEL FREE TO EMAIL/ CALL/ OR TEXT 209-643-9414. PLEASE DO NOT ASSUME ANYTHING! PLEAS
|
|
Model: Sullair MPB60A. This tool is working great. Shipping Weight approx 90 lbs. for the jack hammer and 40 lbs for the tools. Available for local pickup in South Beloit, Illinois, or if you have a UPS number I can drop it off at the UPS center for packing and shipping, buyer pays for packing and shipping. Please email with any questions. Designed for Work Efficiency and a Long, Trouble-free Life. High-Wear Parts Reduced, the Sullair breakers have eliminated most high-wear parts. Fewer parts mean less wear, less maintenance, and less downtime. No Tappet System, unlike conventional breakers, Sullair breakers have no multi-part tappet system. With fewer parts, wear is reduced and risk of air leak is minimized. With no tappet system, which requires three independent impacts, noise is also reduced. ... moreOne Piece, Non-Protrusive Housing, A leak proof air cushion forms at the end of the piston stroke and stops the piston from direct impact when the tool is not breaking. The elimination of side rods, nuts, and springs makes Sullair breakers sleeker and more comfortable to operate. Minimal Lubrication Required, with only two parts moving during operation, normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. Manual lubrication before storage is sufficient. Direct Impact Piston, One moving impact part minimizes maintenance. Parts Interchangeability, Standardization of design permits a high degree of interchangeability of parts between Sullair models. Quieter, the piston, impacting directly on the steel shank rather than a tappet, reduces noise level of the breaker. Smoother Operation, Reduced kickback is less fatiguing to the operator. Improved Latch Design, Durable double roll pin permits easy steel changing. Less Air Consumption, The direct impact piston design, non-corrosive distribution valve and one-piece housing dramatically reduce air consumption. You can operate more tools from a single compressor. For example, a 1
|
|
This hammer drill is in good condition. This is a gas power drill. Ratio of 1:20. Item weighs 50 pounds just by itself. What you see is what you get. We pictured the actual products for our listings! Local Pickups: We offer local pickups but please contact us for details.Win one or more items and I will help you save on shipping. No international shipping. Disclaimer When item is purchased by the winning bidder he/she agrees to have read the auction listing and understands the item is sold“as is” and has been previously used. Please check us out on the web at southerncaliforniajewelryandloan.com or visit are store at 12522 Westminster Blvd. Santa Ana. California, 92706 We are open 6 days a weeks Monday 9am to 6 pm Tuesdays 9 am to 6 pm Wednesdays 11am to 6 pm Thursdays 9 am to 6 pm Friday ... more9 am to 6 pm Saturday 10 am to 5 pm Please feel free to call and ask questions(657)210-4645 Ask for Alise Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Please pay within a week of buying item.If there is any problems please contact me. Please note. If you enter the wrong billing address your card will be declined. Taxes: 8.000% Sales Tax to California buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed Paypal and Billing addresses Only! Shipping Carriers: USPS 1-8 Day Local Pickups: We offer local pickups but please contact us for details.
|
|
|
BOSCH Electric Jack Hammer Breaker Demolition Construction Tool 611304034 Parts BOSCH ELECTRIC JACK HAMMER TOOL FOR PARTS! FOR PARTS CONDITION! MISSING HANDLES. COMES WITH THE FOLLOWING: MODEL NO. 611304034 S/N:466064 15AMP. 1800W. HAS A 1 1/4" HEAD WHICH IS PRETTY WORN OUT. EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS!
|
|
|
LISTED IS A USED WORKING CP14RR ROCKDRILL. UNIT COMES WITHOUT AIR HOOKUP.
|
|
|
American Pneumatic Clay Spade Digger Tool. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ea8dcfee4-0x108-
|
|
Bosch 11305 demolition hammer w/ metal case in great operating condition! has 3 attachements to it also! AUCTION GUIDELINES: PAYMENT: Payment must be made within 3 days of sale unless other arrangements are made. Payment can be made by Paypal. Visa or mastercard by calling our office between 10-5 m-f central time 715-231-7296 SHIPPING: Shipping is done via shipping calculator for the 48 states. All others must email before placing bid we will let you know what shipping would be. We only ship to the U.S and Canada. RETURNS: Returns are accepted up to 7 days after you receive your Item if you are unhappy with the condition or functionality of the item. Keep in mind the items that have serial numbers ie: electronics. Power tools, etc. we have on file and everything is tested before listing unless ... morenew. The return must be sent back in the original package if item is new. If you need to return anything either email us or call us before you send back to get an RMA# if you do not have an RMA# we cannot accept the return. Refunds will be given as Money back less shipping and handling. QUESTIONS: Questions about an item or shipping of an item you can either email us anytime or call us at 715-231-7296 m-f 10-5 central time. We will do our best to answer any and all questions about the products we have available. If you email us we will get back to you within 24 hours.
|
|
|
YOU ARE BIDDING ON A USED BOSCH 11311 SDS MAX. WORKS VERY WELL. HITS HARD. VERY RELIABLE W/ 4 SDS MAX BITS AND CASE. 14 days money back. Buyer pays return shipping
|
|
|
Bosch Jack Hammer Used- Model 611304- includes 3 bits and cart. Free local pick up. Shipping available for $125.
|
|
|
40 lb little jackhammer works great and has a 1 1/4 inch point tip Posted with
|
|
|
BOSCH DEMOLITION HAMMER SDS MAX 11313EVS W/ONE STRAIGHT BIT. BIT HAS SOME WEAR. HAMMER HAS BEEN TESTED AND WORKING.IT IS USED SO SELLING AS IS. COMES WITH HANDLE AND HARD CASE. PAYMENT IS DUE WITHIN 3 DAYS OF END OF AUCTION.ITEMS WILL BE SHIPPED AS SOON AS PAYMENT IS RECEIVED.
|
|
|
I have a 2011 Sandvik Br108. It is in really good working shape. Posted with
|
|
SKU: 640032 A: 0015000000QdgDT O: 0065000000NJT5P PA: View Photo Gallery. Calculate Shipping. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a Makita HM1810 70lb AVT Breaker Hammer in good operating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Makita Model: HM1810 Serial Number: 36563 Transport Weight: approx. 75 lbs Transport Dimensions: 42” ... moreL x 48” W x 27” H Features/Specifications: Blows per Minute: 1.100 BPM Impact Energy: 46.5 ft.lbs. AMPS: 15a 120V 8 Bit Type 1-1/8" Hex Shank Bits Condition: Former rental unit in good overall condition Unit is in good overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: This item will be shipped on a pallet. There is a minimum charge of $75 for palletizing this item. This fee includes professional palletizing. Banding, wrapping and loading of this item so it is legal and ready for an LTL carrier to transport. Buyers will be assessed a $5 handling fee for the local pickup of item(s) as sho
|
|
SKU: 640033 A: 0015000000QdgDT O: 0065000000NJTs2 PA: View Photo Gallery. Calculate Shipping. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a Bosch Brute 0611304139 Demolition Hammer in Good operating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Bosch Model: Brute 0611304139 Serial Number: 290001086 Transport Weight: approx. 135 lbs Transport ... moreDimensions: 48” L x 42” W x 13” H(This item will be shipped on a pallet) Features/Specifications: 120V- 60 Hz- 1 5A Impact Energy(ft. lbs. 43 No Load BPM 1 Cord Length(ft. 12 Includes cart. As shown Resources: For more information on this unit including full specifications. View the manufacturer’s brochure(pdf) Condition: Former rental unit in good overall condition Unit was plugged in and tested. Functional. Unit is in good overall cosmetic condition with normal wear See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: This item will be shipped on a pallet. There is a minimum charge of $75 for palletizing
|
|
This auction is for a used but in great shape and fully functional Sullair MPB-90A Paving Breaker Jack Hammer. As per the manufacturer: Our direct-impact. Non-corrosive automatic valve design with its one-piece housing dramatically reduces air consumption. You can operate multiple tools from a single compressor. Weight 92 lbs. Length 27 1/2" Bore& Stroke 2 7/16" x 5 9/32" Impact Rate 1380 blows/min. Air Consumption 62 cfm(1.8 m 3/min. 29 l/s) Air Inlet Diameter 3/4" NPT Shipping Weight 97 lbs. Chuck Size 1 1/8" HX x 6" 1 1/4" HX x 6" High-Wear Parts Reduced No Tappet System One Piece. Non-Protrusive Housing Minimal Lubrication Required Direct Impact Piston Parts Interchangeability Quieter Smoother Operation Improved Latch Design Less Air Consumption ... moreSINCE 2003 SHIPPING This item is located in Miami Beach. Florida 33154 Please use the link to the freight/shipping calculator above for a shipping quote that includes all pallet. Banding, freight and loading fees. We can provide pallet. Banding, wrapping, and loading services if you would like to send in your own commercial carrier at no additional cost. PAYMENT Unless otherwise stated above. Full payment is due within 4 days after the close of auction. Unpaid auctions will be forfeited and a Non-Paying Bidder alert will be filed with eBay. We do not make exceptions. For this auction we accept: PayPal Bank Wire Transfer Credit Cards(via PayPal) PayPal eCheck is accepted. Please note that items cannot be released until the eCheck has cleared in 3 to 4 days(see you PayPal account) Cash at pickup All items must be shipped. Picked up, or removed within 14 days of the end of the auction(unless pre-approved via email) Items left after this time will be subject to a $20 per day storage fee. The buyer will forfeit the item- and any payments made- when storage fees reach either the sale price of the item or a time period of 30 days from the sale of the item. Whichever comes first. No money will be returned for forfeited items. Withou
|
|
|
Makita HM1304B jackhammer Used but in great working order Cart 3 bits Any questions 8607776221 Item will be shipped on pallet Posted with
|
|
Bosch Brute 0611304139 Electric Demolition Jackhammer Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Make: Bosch Model: 0611304139 Condition: Used/Lightly Used- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Jackhammer with one drill bit. Guarantee: 30 Day satisfaction guarantee 267663.1 1631 KH Order: 21438 We are only able to accept PayPal payments it's secure and offers the most protection to buyers and sellers alike. PayPal also gives you the flexibility to pay with your checking account. Debit, ... moreor credit cards. Payment is expected within 8 days. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. We can only ship to addresses in the contiguous US(48 states) This item will be shipped via UPS ground. Shipments will only be made to confirmed PayPal addresses. Our goal is to ship within 24 hours of PayPal receipt of payment. And we guarantee it will leave our store within 2 business days. Insurance and delivery confirmation is included for all items and is calculated into the shipping charge. Shipping time with UPS ground is generally 2-6 business days, we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's expense, so please email any special requests, and we'll try to get you a quote within 24 hours. We currently ship from multiple locations in the states of Texas, Tennessee, Illinois, Washington, Nevada, and Florida. We can sometimes combine shipping and reduce the rate if you win items from the same location. Please see the three to four digit store identifier at the bottom of the description, and email prior to auction end for a quote on
|
|
|
Rebuilt Rivet Buster. Chicago Pneumatic 4181PULER Valve Box. Piston, Lock Collar, Lock Clip, Lock Key, Upper& Lower Sleeves, Buffer& Lock Spring are Brand New!
|
|
This is a Makita HM1810 demolition hammer with cart and bit included(point bit) It hits hard and is in good overall working order. These are a 70lb breaker/demolition hammer. And they are equipped with AVT. That is Makita's patented Anti-Vibration Technology that utilizes a counterbalance system to reduce the tool vibration level for unmatched comfort. It has just been operated and inspected with any necessary repairs made. As such, it is being sold as 100% job ready and needing nothing. We can secure the hammer to a pallet and ship anywhere in the US-for the best rate, let us quote it to a commercial business address or to your nearest freight terminal. Please contact us for shipping quotes or with any questions through ebay messaging. Or call us at 1-866-444-4116. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13eca5acc6e-0x102-
|
|
|
two Ingersoll rand rock drills. the yellow one is in good condition and the other is only for parts. there is also a small jack hammer that is for parts only. item is local pick up only. However, buyer can arrange for shipping and I will deliver to local shipping depot. if buyer chooses to pick up item cash on pickup is the preferred method of payment. item is also for sale local so auction can be ended at anytime.
|
|
Atlas Copco MK1- Gas Breaker Checked out unit that customer brought in for repair. Unit had a hairline crack on the crankcase cover causing loss of vacuum pressure and in turn. Scoring piston& cylinder. Customer requested repair, but did not want us to change piston& cylinder. We attempted to repair by replacing rings, but when we reassembled unit, the unit still had an issue caused by the bad piston& cylinder. Customer requested that we stop the repair and asked that we sell the unit as they purchased a brand new unit. Installed the following parts. BRAND NEW PARTS IN UNIT: Over $500 in parts) Parts include. But not limited to: 0320 Crankcase Cover 0415 Gasket 0517 Seal 0536 Support Ring 2351 Oil Plug 0127 Gasket 923400081 Ignition Unit 923400007 Piston Ring 923400682 Carburetor ... more4700392011 Spray Nozzle 9234000126 Head Gasket Spark Plug BUYER BEWARE: Unit needs a piston& cylinder. Do not know if other items are needed. Customer Service We are here to answer any questions you have and to assist you in your concerns. Please contact us prior to leaving us a neutral or negative feedback. We pride ourselves in having a personal touch with all of our customers and always want to leave you 100% satisfied. If you do not receive a prompt response. Please note that we are in the office Mon-Fri 12-3 EST. Responses may be slower during weekends and holidays. Positive feedback is left automatically& immediately upon receiving the same. Payment& Shipping We accept all methods of payment. Payment is due within 3 days of auction ending. Local pick up is always available. But please note that there will be an 8.875% New York sales tax on all pickups. If the listing is for local pick up only. We can help load and/or assist in working out the best rate to have a 3 rd party pick up. But it is ultimately the responsibility of the buyer to have the item transported to them. If the listing is available for shipping. We ship using USPS, UPS Ground, and FreightQuote. Your item will be shipped usually within 1-2 bu
|
|
|
This came thru an auction I attend weekly. They plugged it up to let buyers see that it ran and it did. Comes with 4 bits that look good for used condition. Let me know if you have any questions. Thanks for looking and be sure to visit my store for more great tools.
|
|
|
I Tried to take alot of pics! This Jack Hammer is to my knowledge to be working. When it was taken in it worked perfectly fine. I dont know much about them therefore I am selling as is to the highest bidder. Who knows you may get a steal! If you have any questions feel free to ask before bidding Thanks!
|
|
Superb Condition Hitachi H65 1-1/8” Hex Shank Demolition Breaker/Hammer 11.4 amps. 1400 BPM, adjustable side handle Description: This is a nearly new condition contractor-grade tool that may have never even been used(condition is THAT nice. Although it looks like it has been sitting in the case for quite a while) Actual photos- sorry for my poor photography! Comes exactly as shown, including the metal case(1 latch broken) 2 bits, and extra brushes. There is a bunch of oil in the bottom of the case which looks like it leaked from the bottle/dispenser. Buyer will be very happy and we are selling at a LOW RESERVE PRICE! We have described this item to the best of our ability. Still have questions? Call us Toll Free: 1-800-851-3523 or click"Ask Seller A Question. Please read rules below prior ... moreto placing a bid. AUCTION RULES: Auction only available to bidders in the Continental US. High bidder agrees to pay by PayPal( WE SHIP ONLY TO THE CONFIRMED ADDRESS– NO EXCEPTIONS) Credit Card by phone, or if picking up in person we may accept other payment forms of payment– please ask. Payment required within 5 days of auction close. Buyer agrees to pay $70.00 for delivery to a Continental USA street address(no AK/HI. No APO) Plus 6% MD sales tax if shipping to a MD address or picking up from our store. `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13ed4aa2e4c-0xfe-
|
|
|
LISTED IS A LIGHTLY USED SULLAIR MCH2 CHIPPING HAMMER. UNIT WAS TESTED A WORKS GREAT,
|
|
SKU: 905943 A: 00130000002zo0b O: 0065000000MjsWe PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Bosh Brute Demolition Hammer 1400 BPM 120V 43 lbs/ft in Parts/ Repair condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Bosch Model: Brute 0611304139 Serial Number: 783000688 Features& Specifications: 120V- 60 Hz- 15A Impact Energy(ft. lbs. 43 No Load BPM 1 Cord Length(ft. 12 Dimensions& Weight: ... moreDimensions:L 29.5" x W 23" x H 5" Shipping Weight: 110 lbs. Condition: Former rental unit in parts/repair condition Note- hammer switch mechanism will not engage Normal wear form previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: This item will be shipped on a pallet. There is a minimum charge of $75 for palletizing this item. This fee includes professional palletizing. Banding, wrapping and loading of this item so it is legal and ready for an LTL carrier to transport. Buyers will be assessed a $5 handling fee for the local pickup of item(s) as shown abo
|
|
|
YOU ARE BIDDING ON A FULLY REBUILT USED BOSCH 11241 ROTARY SDS MAX. with now 4 bits*NEW SEALS.O-RINGS,BRUSHES,BEARINGS,CLEANED AND LUBED* WORKS GREAT! I REPAIR TOOLS FOR A LIVING AND WITH TWO KIDS IN COLLAGE I REBUILD AND SELL TOOLS IN MY SPARE TIME! ALL OF MY GUNS ARE VERY DEPENDABLE. READ MY FEEDBACK& BUY WITH CONFIDENCE" 14 days money back. Buyer pays return shippping only!
|
|
You are bidding on a BOSCH GSH 16 GSH16 PROFESSIONAL BREAKER DEMOLITION HAMMER ELECTRIC 3611C35010 Maker: Bosch Item: Breaker/Demolition Hammer Model: G SH 16 Professional Model no: 3611 C 35010 Style: Electric Specs: 120 V 60Hz 15A Serial no: 790000579 Made in: Germany NO CASE INCLU DED Condition: This Bosch Hammer is in very good cosmetic condition. It is previously owned. Shows some cosmetic wear from use and is in good working order. Please see photographs for best description of cosmetic condition. Style and to see what is included. No International Bidding or Shipping. We do not ship to PO/APO Bo xes as UPS will not deliver to them Items selling over $250 will go out with Signature Confirmation Good luck bidding. 141495801 888 Please visit our store where you are bound to find some great ... moredeals. Because your business is so important to us. We are committed to shipping expeditiously. Please bear in mind that we are a retail business and to meet our commitment to both our store and online customers. We ship twice a week(Tuesday and Friday) For your convenience. We will gladly combine shipping on multiple purchases(whenever possible) so we request that you wait for our final invoice before making a payment. To better serve you. We will provide you with the shipping information that pertains to the courier used and the tracking number. Your inquiries are always welcome. WE APPRECIATE YOUR WATCHING AND BIDDING. THANK YOU FOR CHOOSING FIRSTPOWERSELLERS OUR POLICY We highly appreciate your business. And we strive to meet our costumer’s expectations and satisfaction. In order to do so. We describe every item as accurately as possible, we fully disclose its condition(new or pre owned) cosmetic imperfections, or malfunction and we provide you with pictures that better illustrate said information. If we use a stock photo we will specifically say so. And under no circumstances will that reflect on the condition or the nature of the item since they will be clearly stated. Please. Feel free to contact us with a
|
|
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ALL PHOTOS ARE OF ACTUAL ITEMS OFFERED Makita HMO810B Demolition Hammer NR! This Makita Demolition Hammer is in typical workman's condition. The HMO810B is a compact lightweight hammer ideal for light chiseling. Scaling and chipping. Unique anti-vibration spring between tool body and rear handle reduces operator fatigue. Includes everything pictured. Sorry. No owner's manual or hex wrench. Over $430+ new! $ SAVE BIG $! Bidders with fewer than 3 Positive Feedbacks MUST contact me to confirm intention to complete auction or bids will be voided. I have had too many non-paying bidders in this feedback group. Sorry. Items shipped within 1 day of payment or first business day after payment. Shipping Discount Available For ... moreMultiple Purchases Email Us For Quote. All items insured for amount of high bid. 7 Day return policy. You pay return shipping. We ship to CONTINENTAL U.S. ONLY without prior approval! Alaska and Hawaii Bidders May Have Additional Shipping Charges. Washington State Residents add 8.7% sales tax. We prefer and recommend PayPal for FAST shipping and Easy Payment. We also accept Master Card. Visa, Discover, Direct No Personal or Business checks. Pay me securely with any major credit card through PayPal! Check Out My Other ebay Auctions Contact Axel-Factor: Please Use eBay Contact Seller Link Phone: 509-535-2251 Address: 3301 E Sprague Spokane. WA 99202 Axel's Pawnshop Is A Proud Member Of: Washington State Pawnbrokers Association inkfrog terapeak. I000000. InkFrog Analytics.
|
|
BOSCH BRUTE Electric Demolition Hammer Jackhammer 120v WORKS GREAT NO RESERVE AT THE END. This auction is for a used Bosch Brute electric demolition hammer. The hammer is in great working condition. A heavy duty workhorse of a jackhammer without the hassle of a large air compressor. just plug it in to any 120 volt outlet and start working.It comes with one pointed bit.It has normal signs of being used.But not abused. Not repainted.Sold with no reserve. Please email with any questions. GOOD LUCK! Paypal is accepted and preferred. Payment is expected within 48 hours of purchase. Items are shipped USPS. Unless weight or size exceed shipping requirements. Fed Ex is used for larger items. Delivery confirmation is required. Add To Favorites My Auctions Feedback Template and Photo By Olde*Blue*Barn*Primitives ... moreCopyright © 2008. 2009
|
|
Up for auction we have a BOSCH 11311EVS MAX DEMOLITION HAMMER W/7 BITS AND METAL CASE BOSCH 11311EVS MAX DEMOLITION HAMMER W/7 BITS AND METAL CASE. ITEM WAS TESTED AND IS IN VERY GOOD WORKING CONDITION AS SHOWN IN OUR PICTURES. SHANK STYLE SDS MAX, HAS DUST SHIELD, LOCKING SLEEVE, LOCK SELECTOR RING, HAND GRIP, AUXILIARY HANDLE, AIR VENTS, VARIBLE SPEED DIAL, SERVICE REMINDER LIGHT, SLIDE ON/OFF SWITCH. I will start the bidding $$$EXTRA LOW$$$ For all you treasure hunters out there! PS: Be careful not to be outbid by last Minute Bidders: It's real easy. eBay has a special proxy bidding system! If you just bid the absolute maximum you are willing to pay for this item right from the start. The proxy bidding system will always work for you! For example, if the bid is $4.00 and you feel it's ... moreworth $15.00, then just bid $15.00 now. The proxy system will automatically put a bid in for $4.25(one bid higher than the current top bidder) and continue to bid for you automatically until it reaches your preset bid limit(in this case, your highest bid will be no more than $15.00) Now, here's the best part! Let's say the last 2 minutes of the auction some SNIPER comes along, sees one of my wonderful items and bids $4.50 while you're not at your computer. Normally, you would lose. But in this case, the system will automatically increase your bid to $4.75(again making your bid one bid higher than the highest bidder) out-bidding that sniper and preserving your WIN! Isn't that easy? Do yourself a favor. Bid now so you don't forget later! High bidder to pay the SAME FLAT RATE FOR CONTINENTAL U.S. OR- CALCULATED SHIPPING RATE TO THE REST OF THE WORLD! Stated shipping charge covers USPS or UPS Ground shipping to addresses to the lower 48 states. I reserve the right to not ship to any address not confirmed through PayPal as well as any address with only a P.O. box with no physical location. Alaska. Hawaii, Puerto Rico and Canada, please e-mail me your postal code prior to bidding so I can calculate the shipp
|
|
I tested this used Cobra 149 Combi unit and it does run. I have no tools to check the impact rate nor the complete functon of the machine. This unit appears costs about $5400 new and this used one will be a great bargain for any budget. Please look at the pictures to see the great condition of this unit. You can see the serial number in the pictures and also the Sweden manufacturer label. Sweden manufacturers very high quality combi units and this will make a great addition to your inventory. The gas in this unit smelled old because it has been sitting for a while. But the unit did run on it. I drained the gas mix out before boxing it for shipping. Cobra Gas Powered Breakers/Drills: Are Easy to Operate, Run without a Compressor, Hits harder than a 60 lb. air breaker, Hits twice as hard as ... morean electric breaker, With no compressors. Hoses or cables to set up, gas breakers are ideal for smaller jobs. They are indispensable for tasks that involve moving along a line, from position to position. Or for working in remote, inaccessible locations. And for many years, they have been a standard piece of equipment for emergency teams. But the Cobra Combi is not only a self-contained breaker. It’s a powerful drill as well. It can sink holes to the depth of 6.5 feet, and drill up to 12 inches per minute in solid granite. You can use the multi-purpose Cobra Combi/Cobra Standard to: Break concrete, cut asphalt, dig, drive posts and fences, drive rods and spikes, tamp and compact soil, tamp ballast/ties, drill(Combi version only) split rocks(Combi version only)
|
|
|
SUPER AIR CHIPPING HAMMER SIZE 3 No. 3268 PNEUMATIC TOOLS THIS HAS TENSION IN THE TRIGGER. NO OTHER TESTING WAS DONE BY SELLER(I DON’T HAVE AIR AT MY PLACE) AND IT IS SELLING AS-IS.
|
|
|
KING MOLYBDENUM AIR CHIPPING HAMMER PNEUMATIC TOOL. TYPE A, SIZE 1-1/8x1-1/2” THIS HAS TENSION IN THE TRIGGER. NO OTHER TESTING WAS DONE BY SELLER(I DON’T HAVE AIR AT MY PLACE) AND IT IS SELLING AS-IS.
|
|
|
INGERSOLL RAND AIR CHIPPING HAMMER K2L PNEUMATIC TOOLS THIS HAS TENSION IN THE TRIGGER. NO OTHER TESTING WAS DONE BY SELLER(I DON’T HAVE AIR AT MY PLACE) AND IT IS SELLING AS-IS.
|
|
|
Selling a 90 pound. Ingersoll Rand Co. Yellow Jack Hammer MX90! used once•works great•it's been sitting around collecting dust•local pickup only! willing to deliver within a 50 mile radius for an extra fee! please contact me with further questions! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13eef2f175b-0x103-
|
|
|
Hilti TE 505 Break/Jack Hammer.Has some wear. See photos. Cleaning out the garage and getting rid of the things I no longer use. Works Great. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13ef70c59e1-0xfd-
|
|
|
Very nice used Fairmont Hydraulic Breaker/Demolition Hammer made in Fairmont Minnesota at their Railway Division. The better units are from the Railway division and are very hard to find in good condition. This one shows very little wear on the chuck end of the unit. Please click on the pictures to see the great condition of this quality unit.
|
|
i000000. HILTI TE-72 DEMOLITION HAMMER DRILL WITH BITS& CASE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: You are bidding on Hilti TE72 Demolition Hammer Drill with Bits& Case. This unit had been tested and works as it should. It comes in the case with the hammer drill. Bits and an adaptor chuck to use the smaller SDS drill bits also. The unit is in used condition. So if your looking for a mint one, then this is not the unit for you, but if all you need is for it to work well, then please bid and get a great deal on this unit. Most of my items come from mini-storage locker sales. Unless stated otherwise. Please click ... moreon each photo for greater detail* LOOK AT MY OTHER ITEMS. YOU NEVER KNOW WHAT YOU WILL FIND* You are bidding on what you see. I'm giving my opinion on what I think, you be the judge in the end. IF YOU DO NOT AGREE WITH MY DISCLAIMER AND SHIPPING. NO NOT BID. You know the shipping prior to bidding. I put in the box size, the weight and approximately a 3% handling fee(a $2 minimum, for packing materials, gas and time) on how much I think the item will bring. So the shipping is what it is. DISCLAIMER: I make every effort to describe items honestly and accurately. HOWEVER. I cannot catch every flaw. Therefore, no warranty is expressed or implied. Unless stated otherwise. ALL items are sold"AS-IS" ALL SALES ARE FINAL! Unless otherwise stated in listing. SHIPPING: USA- Winning bidder pays Shipping. Handling and Insurance. If you want your item insured you will have to email me. So I can send you a revised invoice. I will not pay for insurance. I will also not be held responsible if not insured due to damage. Loss, theft, etc. I need a physical address NOT a P.O. Box for shipment. I use FedEx Ground on most items. We will not ship to an alternate address for Paypal payments. I ONLY SHIP TO THE UNITED STATES.
|
|
SKU: SB356273 A: 0015000000Nj3zr O: 0065000000NJynW PA: 0015000000VvVTW View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Bosch Brute Electric Demolition Hammer W/ Hammer Hauler in Good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. ... moreTools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Bosch Model: BH2760VB Type: Electric Breaker Year: 2011 Hours: No Meter Serial Number: 103000215 Transport Weight: 135 lbs. Dimensions: L 44" x W 26" x H 12" Features& Specifications: Amperage: 15.0 Rating: 115V Impact Energy: 49.5(ft. lbs. Chuck Type: Hex Resources: For more information on this unit including full specifications. Visit the manufacturer’s website or view the manufacturer’s brochure(pdf) Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may
|
|
SKU: UR760699RA A: 0015000000mIrdV O: 0065000000NJvbA PA: 0015000000kLkjs View Photo Gallery. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a American Pneumatic Pavement Breaker APT 160 in Good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. ... moreTools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: American Pneumatic Tool Model: M160 Hours: No Meter Serial Number: 304191M160 Transport Weight: 115 lbs. Dimensions: L 26" x W 16" x H 8" Features& Specifications: Bore Diameter: 2-1/4" Stroke: 4-1/8" BPM: 1.680 CFM@ 90 PSI: 60-65 Air Inlet Size: 1/2" male Resources: For more information on this unit including full specifications. Visit the manufacturer’s website or view the manufacturer’s brochure(pdf) Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are a
|
|
|
The following item consist of a used APT 160 60LBS 1-1/8 JACKHAMMER CONCRETE DEMOLITION HYDRAULIC BREAKER in good condition. Unit comes with only whats seen in pictures. Don't miss your chance of owning this professional unit for a fraction of the price. see pictures for item's condition(photos always say more than I can) BUYER TO PAY $94.95 SHIPPING. OR CAN PICK UP. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f02be1baa-0x105-
|
|
BID ITEM 1 Hitachi H65 1-1/8-Inch 11.4 Amp Hex Shank Demolition Hammer 1 1-1/8" chisel bit by. Hitachi Model# H65 Condition: USED Please read our Terms and Conditions Pictures/Description: All pictures are ACTUAL PICTURES. Of the items for bid, unless otherwise indicated. If you have questions. Please feel free to contact us via eBay’s messaging system. SHIPPING: We usually ship within 1 business days of receiving your payment. Our regular shipping method is either UPS freight. Ground or USPS flat rate, depending on the item and destination. We ship to all 50 states of the U.S. We do not ship to APOs. FPOs, or Military Mail Box. The tracking number to your package will come directly from UPS(Quantum View Notify) or the USPS. Occasionally these emails will get stuck in your spam filter ... moreso make sure to check there if you have not received your tracking. Please feel free to message us through eBay if you have not received tracking info after two business days. We will be happy to provide it to you. For local pick-up for items. Store hours are Mon-Fri 9:00 to 5:00. WE ARE CLOSED SAT AND SUN. PAYMENTS: We accept Visa. Mastercard and Paypal. Payment is to be received within 7 days of the close of the auction. Use EBAY checkout to compute the total. PayPal will allow you to pay by credit card. Debit card, eCheck, bank transfer and other methods. Check with PayPal for details. 30 DAY RETURN POLICY: We’re confident in the product we sell. If your item is defective or damaged. Let us know within 30 days of your purchase and you can return it for a new one or a full refund. To return and item. You must have a RMA(return merchandise authorization) number issued by contacting our customer service department at 760-662-4496. Buyer is responsible for shipping costs. Items that are returned to us marked as"delivery refused" or"undeliverable as addressed" will be subject to a 20% re-stocking charge. We strive to resolve any issues you may have. Our ultimate goal is to keep you happy as a customer.
|
|
|
Used Bosch jack hammer. Reconditioned before bits and cart were stolen- not been used since. A great demo tool for a steal. Needs a paint job. Email with questions.
|
|
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! | | Bosch Brute Electric Jack Hammer Breaker Demolition W/Chisel, Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album This is a heavy duty Bosch Brute electric jack/breaker hammer with a 14" x 1 1/8" Brunner& Lay chisel bit. Only needs to be plugged in. Operates without a compressor. Shock mounted handles absorbs vibration, grease packed gear box and hammer mechanism. This is a good breaker but will need new brushes to use it. It has been setting about 3 years now unused due to we never got around to replacing the brushes and now no longer have use for it. NOTE: KEEP IN MIND WHEN BIDDING ... moreTHAT THE BRUSHES WILL NEED TO BE REPLACED BEFORE IT CAN BE USED. You will need to make your own shipping arrangements with a shipper of your choice or(PICK UP IS ALWAYS WELCOME. I might suggest Herberts Transport Sheri or Darren at 586-524-7701 or 586-709-0282 for a shipping option. Herberts Transport will blanket wrap and does a good job and very reasonable. Herberts Transport has delivered several items for me and always picks up on time, delivers fast and no drama just good service. The jack hammer will need to be picked up from a residential address 60641. Please make sure your shipper will blanket wrap for a safe arrival. Weight will be approximately 100 pounds only guessing. Good luck bidding and please view my other items for antiques and misc. Bid with confidence as we have many repeat buyers because our business was built on honest ethical sales, great packaging, prompt service and good communication throughout your transaction. PLEASE READ CAREFULLY BEFORE BIDDING: Buyer pays any and all shipping and handling cost. All shipping. Handling and insurance prices listed in the description are valid for the contiguous 48 states only unless otherwise noted. On all items being shipped i ship by FedEx and USPS at my discretio
|
|
|
Thor jack hammer. Industrial art. Mid century steampunk. In used conditio9n, spike locks in as in should. No tested. sold as is. 23" long, spike is 18" long. Very heavy 33 lbs. shipping weight will be 35 lbs. Have a close look at the photos, ask any questions you have and Thanks for looking. Sold as is. Shipping in the USA only. Will combine shipping when possible. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
You are looking at a Milwaukee Demolition Hammer 5332. This item is in used condition. Includes bits and metal case. Please see pics for details. Please ask the seller any questions. Posted with
|
|
|
DEWALT HAMMER DRILL D25891 VERY GOOD CONDITION. YELLOW AND BLACK. FULLY WORKING. FOR HEAVY DUTY WORK. Posted with
|
|
|
Bosch(0-611-304-139) Brute Jack Hammer w/ 1 Heavy Duty Attachment Included. THIS IS IN COMPLETE WORKING ORDER. BIDDING STARTS AT.99 AND SHIPPING IS 49.99 ANY QUESTIONS INBOX US A MESSAGE OR CALL US AT 313-297-2274
|
|
BOSCH BRUTE JACK HAMMER- MODEL 06 11304 139 USED IN GOOD WORKING CONDITION- WE GUARANTEE EVERYTHING WE SELL! PLUG IN HAMMER- DOES NOT NEED A COMPRESSOR- TRULY PORTABLE AND CONVENIENT SHOCK MOUNTED HANDLES ABSORBS VIBRATION TO REDUCE OPERATOR FATIGUE SPECS: AMPS 15- 120 V- 60 HZ IMPACT ENERGY 43 FT LBS NO LOAD BPM 1400 TOOL LENGTH IS APPROX 33" 43" WITH ATTACHED BIT ENGINEERING NUMBER 0611304139 CORD LENGTH APPROX 9' HANDLE SPAN 23 1/2" BODY DEPTH 5" GREASE PACKED HAMMER AND MECHANISM OPERATES ON 115/120- VOLT AC/DC. 15 AMP OUTLET OR 2,500 WATT PORTABLE GENERATOR DON'T PASS UP THIS GREAT DEAL! WE GUARANTEE EVERYTHING WE SELL! PLEASE NOTE. IF YOU LIVE CLOSE ENOUGH, YOU MAY PICK UP THIS ITEM AT SYDMOR'S 131 SECOND ST N.W. BARBERTON. OHIO 44203(330) 753- 6812- WHERE ... moreWE CARRY A LARGE SELECTION OF TOOLS AND GUN SUPPLIES DURING NORMAL BUSINESS HOURS M-F 9 am- 5 pm or SAT 9 am- 4 pm NO EXTRA CHARGE FOR LOCAL PICKUP. SALES TAX WILL BE CHARGED AT 6.5% PAYPAL PAYMENT IS DUE WITHIN 3 BUSINESS DAYS. IF PAYMENT IS NOT MADE WITHIN 3 BUSINESS DAYS THEN THE ITEM WILL BE RE-LISTED. THANK YOU FOR SHOPPING WITH SYDMORS! HAPPY BIDDING! PLEASE BROWSE ALL OF OUR LISTINGS AT SYDMORS ON EBAY! ONLY ITEMS PICTURED ARE INCLUDED IN THIS LISTING
|
|
SKU: SB186234 A: 0015000000UX2UA O: 0065000000NKyNm PA: 0015000000VvVTW View Photo Gallery. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a Bosch 3611C35010 120v Electric Demolition Hammer in good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions ... morefor industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Bosch Model: 3611C35010 Serial Number: 788000919 Transport Weight: approx. 42 lbs Transport Dimensions: 38” L x 14” W x 13” H Features/Specifications: 120v 60Hz 15A Impact energy: 17(ft.lbs. Carrying case Condition: Former rental unit in good overall condition Unit is in good overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: Buyers will be assessed a $5.00 handling fee for the local pickup of item(s) as shown above. Please see the Shipping tab(below) for more details including the l
|
|
SKU: SB159259 A: 0015000000bCw7m O: 0065000000NL1LU PA: 0015000000VvVTW View Photo Gallery. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a Sullair MPB-60 65lbs Pneumatic Breaker Hammer in Good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions ... morefor industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Sullair Model: MPB-60 Transport Weight: approx. 65 lbs Transport Dimensions: 27” L x 14” W x 10” H Features/Specifications: This large heavy-duty hammer is the tool of choice for thick concrete. Boulders, frozen ground, This large heavy-duty hammer is the tool of choice for thick concrete, boulders, frozen ground, etc. 1-1/8”x6” Shank/Chuck Bore& Stroke: 2-5/32" x 5-5/32" Impact Rate: 1360 blows/min Air Consumption: 48 cfm Air Inlet Diameter: 3/4" NPT Condition: Former rental unit in good overall condition Unit is in average overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximat
|
|
SKU: SB361405 A: 0015000000OKfmx O: 0065000000NKTC6 PA: 0015000000VvVTW View Photo Gallery. Location: Sacramento. CA 95826 Item Description. This is a no reserve auction for a 2011 APT 654 Air Hammer in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: APT Model: 654 Year: ... more2011 Serial Number: Unknown Shipping Weight: 20lbs Shipping Dimensions: 20" L) x 12" W) x 6" H) Features/Specifications: Pistol grip Exhaust deflector 3/8 coupler 1 1/8" Bore 2" Stroke 2100 BPM Condition: Former rental unit in good overall condition with normal wear from prior use- see photos Said to be working at time of decommission- not tested by bidadoo Unit is in good overall cosmetic condition with normal wear- see photos See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: Buyers will be assessed a $10 handling fee for the local pickup of item(s) as shown above. Please see the Shipping ta
|
|
SKU: UR657062RA A: 0015000000mIrdV O: 0065000000NJvW0 PA: 0015000000kLkjs View Photo Gallery. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Atlas Copco TEX P90S Pneumatic Breaker in good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. ... moreTools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Atlas Copco Model: P90S Serial Num ber: 003461 Type: Pneumatic Breaker Shipping Weight: 100 lbs. Shipping Dimensions: L 30" x W 15" x H 15" Features& Specifications: Breaker Type: standard Breaker Version: silenced Air Consumption: 85 cfm Impact Rate: 1260 blows/min Sound Level Guaranteed: 111 dB Sound Pressure Level: 99 dB SOFSTART™ two-step trigger Resources: For more information on this unit including full specifications. Visit the manufacturer’s website or view the manufacturer’s brochure(pdf) Condition: Former rental unit- operational at time of decommission- untested by bidadoo Normal wear from previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. W
|
|
Normal 0 0 1 551 3141 26 6 3857 11.1539 0 0 0 AM030113108 Up for purchase is a“USED” WORKING ORDER” Up for sale is a Bosch the 11314 SDS Max Great working Chisel Demo Hammer Manufactured in 1996 Included 1 tool 11314EVS 1 case 3 chisel bits for the tool PLEASE READ ENTIRE AUCTION BERFORE YOU BID! SEE MY OTHER ITEMS FOR SALE(Click the“See other items” below Seller information) Reference Guide: Condition– FAIR“ The reference guide below is just that! It is a reference for you. The buyer, to compare to our item descriptions. Example: If in our description we say that the item is in‘Fair’ condition, you can look at the guide below and see our definition of‘Fair’ New: Never used Great: Like new condition with very little wear Good: Few scratches. Small but noticeable Fair: Substantial wear and ... morescratches Poor: Significant wear or damage. But the item is functional Untested. Troubled” Sold As Is, or Needs Repair: No refunds can be issued and no returned can be accepted on items described as such. The item is damaged or defective in some way. The item probably can still be used for parts or possibly be repaired by a technician. Please Note: We do not warranty any rechargeable batteries. IE: laptops, tools, cameras, cell phones, PDAs, etc. Payment: We accept PayPal ONLY. PayPal payments are due 3 days after the auction ends. Shipping: Please note: All items that sell for over $250 will ship with insurance and signature confirmation required. We will ship within 3 days after payment has been received and tracking# will be emailed to you thru ebay. We will only ship to the address provided in PayPal. Please verify it is current before making payment. Shipping changes after payment will not be accepted. Combined shipping are available and it is the buyers responsibility to contact us in either of these situations PRIOR to paying for the item(s) so we may send them an updated invoice. If they fail to do so and make instant payment without receiving an updated invoice we are unable to issue a refund
|
|
|