|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Good tools are indispensable for the complicated work of breaking up concrete and block. 1900W power, 52cc two-stroke engine, and 6500 r/min speed can greatly improve your efficiency. It is also suitable for the compaction of loose material if suitable parts are connected.
0 bids Free Shipping
Condition: New Location: Chino, United States
NOTE: This product is heavy and light, easy to fall in the vertical state, please pay attention to posture to avoid falling and damage the machine, due to falling products damaged, the company does not assume after-sale responsibility. Product key data Engineer type：44mm, Single eylinder, air coling, 2 stroke Fuel:mixing oil(gasoline 25, two-stroke engine oil 1) Fuel tank capacity:1.3L Displacement:52cc Max power and speed:1.9K W/6500r/min Max torque and speed:3.5N.m/5000r/min Consmption rate:≤0.6L/h Impact fregnency:1500Bpm Impact enengy:20-55J Starter system：Hand pull start Net weight :20.5 kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch） Cylinder diameter * stroke :44×34 mm(1.73×1.34 inches) spark plug model: BM6A.
0 bids Free Shipping
Condition: New Location: Chino, United States
(Please Note: This Product Is Heavy on Top and Light on Bottom. It Is Easy to Fall When Standing Upright. Please Pay Attention to the Posture to Avoid Falling and Damaging the Machine) This Product Is Heavy and Light, Easy to Fall in the Vertical State, Please Pay Attention to Posture to Avoid Falling and Damage the Machine, Due to Falling Products Damaged, the Company Does Not Assume After-sale Responsibility. Product Key Data Engineer Type：44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Impact Fregnency:1500bpm Impact Enengy: 20-55j Starter System：hand Pull Start Net Weight :20.5 Kg.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Convenience and Comfort, the Operator Can Shovel Digging a 360 Degree Rotation. Chisel Speed, High Efficiency. Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1). Starter System：hand Pull Start. the Process of Using Machine May Lead to Gravel.
0 bids Free Shipping
Condition: New Location: Miami, United States
Atlas Copco, AEG, Milwaukee.
0 bids Free Shipping
Condition: New Location: Dayton, United States
✿The 16A motor with 60 JOULES impact energy, 1900BPM, 1700W output is optimal to complete work projects on different kinds of surface. ✿The system locks bits automatically to provide max impact energy and dust proof.
0 bids Free Shipping
Condition: New Location: Las Vegas, United States
DEWALT DWH052K Large Hammer Demolition Breaker Dust Extraction System. Condition is New. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Jack Hammer Clay Spade Shovel Chisel Bit 1.18in Demolition Hammer Tool Silver Specifications: --Material: 40Cr Chromium steel --Size: 30*440*135mm --Suitable type: suitable for 65/95 Jack hammer --Color: Silver Application: --Hammer shovel can only be used for vulnerable objects, such as concrete, stone, etc. Never for metal objects such as steel bars. Features: --Made of high quality 40Cr chromium steel as raw material --High temperature quenching greatly improves hardness --The product life is longer than that of ordinary carbon steel. --65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Package included: 1 x Jack hammer Clay Spade Chisel .
0 bids Free Shipping
Condition: New – Open box Location: Hamersville, United States
0 bids Free Shipping
Condition: New Location: Chino, United States
Suitable for Tearing up Foundations, Ripping up Driveways, Demolishing Re-enforced, Concrete Floors or Walls, Breaking Through Solid Rock, Etc. Widely Used in Concrete, Bricks, Rocks, Construction and More.
0 bids $5.00 Shipping
Condition: New Location: , Canada
Buy It Now
$68.93 Shipping
Condition: Used Location: Lakeland, United States
Zoom my pictures so you can see them better.
0 bids Free Shipping
Condition: New Location: Chino, United States
This Gasoline Rock Drill is a High Efficient Drill Machine. It Adapt to Outside Situations Where There is No Water, No Electronic Power and No Air Compressor. It Can be used as a tool for Breaking, Percussive Drilling, Tamping Splitting or Ramming.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Convenience and Comfort, the Operator Can Shovel Digging a 360 Degree Rotation. Chisel Speed, High Efficiency. Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1). the Process of Using Machine May Lead to Gravel.
0 bids Free Shipping
Condition: New Location: Chino, United States
The 16A motor with 65 JOULES impact energy, 1900BPM, 1700W output is optimal to complete work projects on different kinds of surface.The SDS-Hex system provides the convenience when switching bits without tools.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dig up Soil Ball. Fuel: Gasoline/ 4 Stroke Engine Oil. Net Weight : 16.5kg (36.4 Ib). Engine Type: 40 30mm. Single Cylinder, Air Cooling, 4-Stroke. FuelGasoline/ 4 stroke Engine Oil. Power and Speed: 1.2kw/8500r/Min.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. Powerful Strength: This pneumatic shovel adopts strengthened alloy steel cylinder, with larger storage capacity and strength, which can enhance the working efficiency. Relieve Vibration: This pneumatic shovel is designed with a straight handle, with a strong tension spring, full of elasticity, not easy to break the deformation, and effectively relieve vibration.
Buy It Now
Free Shipping
Condition: New Location: Greensboro, United States
BY SKIDRIL. Skidril high quality design, materials and build make this a rel iable driver.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
Buy It Now
Free Shipping
Condition: New Location: Roper, United States
The ET117-008 water softener air gap is designed to provide a convenient way to install an air gap into a 1-1/2-inch standpipe drain. The air gap’s splash-resistant design protects the air gap’s surroundings from water damage. The inlet accommodates flex tubing for leak-proof installation in tight spaces. The right-angle inlet provides a convenient way of connecting discharge water tubing to a drain line. This air gap is easy to use and legal to install in any state. The ET117 series air gaps are listed by UPC (Uniform Plumbing code) and tested for compliance with IPC (International Plumbing Code) and NSF standards.
Buy It Now
Free Shipping
Condition: New Location: Rogers, United States
1-1/8 Arbor. • Local pick up is allowed. • Must be unused.
0 bids Free Shipping
Condition: New Location: West Newton, United States
This is only for the trigger not the handle. The last two pictures are for reference only. You machine needs to look similar to the one without the line through it. One key difference is the shape of the handleopposite the triggerhandle.
0 bids Free Shipping
Condition: New Location: , United States
The 16A motor with 60 JOULES impact energy, 1900BPM, 1700W output is optimal to complete work projects on different kinds of surface.The SDS-Hex system provides the convenience when switching bits without tools.
Buy It Now
Free Shipping
Condition: New Location: , United States
65a Shovel Is Only for Objects with High Hardness and Brittleness, Such As Concrete, Brick Wall, Stone, Etc. Your satis faction is our ultimate goal. --Size: 30 440 135mm. Manufacturer Part Number ( 制造商零件编号 )Does not apply.
Buy It Now
Free Shipping
Condition: New Location: Melville, United States
Paramount 27 oz Head 1-3/4" Face Diam Rubber Dead Blow Hammer 12-3/4" OAL, Rubber-Covered Steel Handle
Buy It Now
$268.00 Shipping
Condition: Used Location: Lomita, United States
The Makita Demolition Hammer Model HM 1301 is a powerful electric tool designed for breaking and demolition tasks. Made in Japan, it boasts of high-quality construction and reliable performance. With its brand name and model number, users can trust that this tool is built to last. Ideal for use in construction sites and other industrial settings, this Makita Demolition Hammer is a must-have for those who need to break through tough materials quickly and efficiently.
0 bids Free Shipping
Condition: Used Location: Bergen, United States
Condition: USED - Removed from service in working condition. There is wear and tear from typical use.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Product Parameters: Machine Size：69*37cm (27.2*14.6 inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65L Max. Power And Speed: 1.2kw/8500r/Min Max Torque And Speed: 1.2Nm/5500/Min Fuel Consumption Rate: 0.47L /kw.h Scope of Application: 1.Rock breaking 2.Dig Up Soil Ball 3.Tree transplanting 4.Tree Digging And Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Key Data Engineer Type：44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Impact Fregnency:1500bpm Impact Enengy: 20-55j Starter System：hand Pull Start Net Weight :20.5 Kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch）.
Buy It Now
Free Shipping
Condition: New Location: Eastpointe, United States
Standard Chisel. Shank Size. These fees are your responsibility and will have to be paid before your order will be released to you. DeWalt Hand Tools. 1-1/4" x 14". Bucket Boss Tool Bags & Belts.
Buy It Now
Free Shipping
Condition: New Location: , China
Power: 2200W. Speed: 0-930r/min. Speed: 0-800r/min. We will reply you ASAP.
0 bids Free Shipping
Condition: Used Location: Endicott, United States
Drill weight: 22 lbs.
Buy It Now
$19.99 Shipping
Condition: New Location: Memphis, United States
Size:2200Watt perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! Input motor:2200 watt.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Good tools are indispensable for the complicated work of breaking up concrete and block. 1900W power, 52cc two-stroke engine, and 6500 r/min speed can greatly improve your efficiency. It is also suitable for the compaction of loose material if suitable parts are connected.
Buy It Now
Free Shipping
Condition: New Location: Cleveland, United States
Hoses and flat-face couplers included. Weight is 610 lbs less mounting bracket. 4406276366 Compare & Save. Low Profile, Long Bottom, Bulk Material, Snow & Litter, 6-in1 Combination, Stump & Grubber, Concrete, and Rock Buckets (w/ or w/o Teeth, Tooth Bars, & other Accessories).
0 bids Free Shipping
Condition: New Location: Rockford, United States
This item has never been used or tested. What you see in the picture is exactly what will arrive at your door! INGERSOLL RAND. Vibration Reducing Handles. (1) Bare Tool. Exhaust Location. Air Inlet Size.
Buy It Now
Free Shipping
Condition: New Location: Dillon, United States
Storage for four breaker chisels. High-quality steel with powder coat finish.
0 bids $79.90 Shipping
Condition: Used Location: , Canada
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Convenience and Comfort, the Operator Can Shovel Digging a 360 Degree Rotation. Chisel Speed, High Efficiency. Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1). the Process of Using Machine May Lead to Gravel.
0 bids Free Shipping
Condition: New Location: , China
For masonry and concrete demolition. Correctly hardened and tempered so blade will not shatter when struck hard. Material: Alloy. Type: #1: Round Head 7 teeth, #2: Square head 16 teeth(optional). Heat treated material for necessary hardness and durability.
Buy It Now
Free Shipping
Condition: New Location: , United States
MAKITA ORIGINAL CB440 CARBON BRUSH SET. LXFD01 18V LXT Lithium-Ion Cordless 1/2" Driver-Drill. BTD142 18V Compact Lithium-Ion Cordless Impact Driver. BJS130 18V LXT Lithium-Ion Cordless 18 Gauge Straight Shear.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Size & Weight: Overall Dimension: 24 13/16" X 10 5/8" X 10 1/4" (63x27x26cm) Engine Type: 36 X32mm; Single Cylinder; Air Cooling; 2 Stroke Net weight of the machine (excluding the weight of the drill) : ≈10.5kg3pcs Drill:22*350mm 1pc Point Chisel:18*350mm 1pc Flat Chisel: :16*280mm Specifications: Displacement: 32.6cc Impact Frequency: 3200min-1 Impact Energy: 30j Power：1200w Max Torque and Speed: 1.5n.m/5000r/Min0.5l/H Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil) Fuel Tank Capacity: 0.9l Fuel Consumption Rate: ≤0.5l/H Max Drilling Diameter:40mm Starter System: Hand Pull Start Package Contents: 1x Gasoline Hammer Drilling Machine 3x Drill 1x Point Chisel 1x Flat Chisel 1x Toolkit 1x Oil Can (Empty).
0 bids Free Shipping
Condition: Used Location: Davis, United States
Lot Heads for a stark jack hammer. Good condition
0 bids Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New – Open box Location: Macon, United States
Buy It Now
Free Shipping
Condition: New Location: South Richmond Hill, United States
LINCOLN ELECTRIC WELDERS. FLOOR SANDERS / WOOD WORKING TOOLS. GRINDERS, SAWZALLS, DRILLS, NAILERS, ETC (ALL ELECTRICAL TOOLS). Compatible with the following models FEEL FREE TO INQUIRE ABOUT ANY OTHER PARTS YOU MAY NEED!
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Other Accessories Pair of protective gloves, case, hex wrenches.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
Bosch 11335 (3611C35010) 35lb JACK Breaker Hammer handle assembly
Buy It Now
Free Shipping
Condition: New Location: , United States
65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Made of high quality 40Cr chromium steel as raw material. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: Used Location: Clare, United States
W&J hydraulic demolition breaker hammer. Specifications: Model: 24C Shank: 1-1/4" Hex Weight: 65 lbs Condition: Good working Warranty: 30 Days Please contact us directly if you need overnight shipping! M.I.S. Industrial contact info: info (at) misindustrial.com Office: [phone removed by eBay] Also please check out our website for free shipping!.
Buy It Now
Free Shipping
Condition: Used Location: Lockport, United States
Recently used at a Local Construction site so please expect some minor scratches, residue from use and other cosmetic imperfections. Shows wear from use, refer to pictures. We have multiple quantity available for purchase. Please see pictures carefully for further visual details as they are part of the description. This item is to be used for its intended purpose. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.
0 bids Free Shipping
Condition: New Location: Austell, United States
Package Included 1* Hammer Drilling Machine 3* Drills 1* Point Chisel 1* Flat Chisel 1* Fuel Tank 1* Funnel Other Accessories for Assembly Specification Color: Black Material: Aluminum, Plastic Style: Modern Surface Treatment: Painted Process Assembly Required: Yes Power: 1200W Displacement: 32.6CC Engine Type: Single Cylinder, Air Cooling, 2-stroke Impact Frequency: 3200min-1 Impact Energy: 30J Max Torque and Speed: 1.5N.m/5000rpm Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil) Fuel Tank Capacity: 0.9L/0.2gal/30Oz Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour Max Drilling Diameter: 40mm/1.5inch Starter System: Hand Pull Start Noise: ≤104dB Net Weight (Exclude Drill): About 10.5kg/23lbs Product Size (L*H): 63*24cm/24*9inch Engine Size: 36*32mm/14*12inch.
Buy It Now
Free Shipping
Condition: New Location: Sicklerville, United States
PB90-32 rubber RETAINER BOLT BUSHING GH. For Paving Breaker.
0 bids Free Shipping
Condition: New Location: Chino, United States
This Gasoline Rock Drill is a High Efficient Drill Machine. It Adapt to Outside Situations Where There is No Water, No Electronic Power and No Air Compressor. It Can be used as a tool for Breaking, Percussive Drilling, Tamping Splitting or Ramming.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
Buy It Now
Free Shipping
Condition: Used Location: Lockport, United States
Recently used at a Local Construction site so please expect some minor scratches, residue from use and other cosmetic imperfections. Shows wear from use, refer to pictures.We have multiple quantity available for purchase.Please see pictures carefully for further visual details as they are part of the description. This item is to be used for its intended purpose. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.
0 bids Free Shipping
Condition: New Location: Chino, United States
65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Your satis faction is our ultimate goal. Feature Compact Design,Unique Appearance，high reliability.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Austell, United States
(Please Note: This Product Is Heavy on Top and Light on Bottom. It Is Easy to Fall When Standing Upright. Please Pay Attention to the Posture to Avoid Falling and Damaging the Machine) Packing List: Machine+Drill*2+ Proportioning Bucket+Funnel+Filter+Small Accessories*7 Product Key Data： Engineer Type：44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Georgia Fregnency:1500bpm Georgia Enengy: 20-55j Starter System：hand Pull Start Net Weight :20.5 Kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch） Cylinder Diameter * Stroke :44×34 Mm(1.73×1.34 Inches) Spark Plug Model: Bm6a.
|
|
|
Please read details before bidding 1- We want positive feedback. 2- Please contact us before leaving negative/neutral feedback. We will always do what ever we can to make every buyer a happy buyer. 3- You have 10 days money back guaranteed and real person customer services. 4- After 10 days. The sale is FINAL( no exception) 5- No return. No refund, if negative/neutral feedback given without contacting the seller. 6- Bidder with"0" feedback must contact seller before placing a bid. If not your bid will be canceled without notice. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return.I do my very best to describe items to the best of my ability and send them out ASAP.I will always try my best to your shopping experience a pleasant one.I will ... moreleave feedback as soon as feedback is left for me! DESCRIPTION: YOU ARE LOOKING AT A HILTI TE-1000AVR IN EXCELLENT WORKING CONDITION. AUCTION INCLUDED: Everything as seen on the pictures. No more or no less(actual pictures) FEATURES: SHIPPING COST: 1- International buyer. Please contact the seller for the shipping cost 2- Package will ship without insured unless buyer pays shipping insurance. 3- Seller is not responsible for any circumstances. If the package is damaged in shipping, lost packages, after the item is shipped. a) Seller will provide the shipping tracking number(if shipped within USA) b) Seller will only provide Customs Declaration number(if shipped outside the USA) c) Shipping rates applies to the Lower 48 states only. Please ask all questions before you bid. Sorry. There are no local pick ups. ITEMS CAN NOT BE SHIPPED TO P.O. BOXES. Please note; if you are paying with Paypal; I will only ship to Paypal CONFIRMED addresses. If you do not have a confirmed Paypal account. Please pay with one of the other methods listed. d)Signature Required For Transaction Over $250. PAYMENT: Payment must be received within 5 days after the auction. If after 5 days, we have not received payment, we will notify Ebay for NONE-P
|
|
Up for auction today is a Bosch 11318EVS SDS-Max Demolition Hammer with Case. It is in good working condition but has cosmetic wear from use. It has scuffs and scrapes. The numbers 11-1-0094 has been scratched into it. The case has a lot of wear. It is missing one of the latches that hold it closed. Also it has several cracks and a couple of places where it has been broken leaving holes. Please see the photos. S/N- 781000094 CA$H LOANS LLC of Lafayette. Indiana Welcome to our eBay page! We are a family owned business located in Lafayette. Indiana. Since opening our doors in 2010, our business has grown leaps and bounds thanks to YOU, our valued customers! Thank you for your support! We are dedicated to offering our customers the safest and easiest eBay buying experience. Our hours are Monday- ... moreSaturday 9:00am- 7:00pm EST& Sunday 12:00pm- 5:00pm EST. We will reply to your inquiries as soon as possible. However. Please note that we are on EST time. Therefore, we promise at our best to answer your emails within 24 hours. PLEASE DO NOT ASK ABOUT OTHER PAYMENT OPTIONS OR INTERNATIONAL SHIPPING. WHAT WE HAVE LISTED IS WHAT WE ACCEPT. PLEASE DO NOT MESSAGE WITH A LOWER PRICE OR ASK ABOUT PRICE LOWERING. WE WILL LOWER THE PRICE AT OUR OWN DISCRETION AND PRICE THEM AT WHAT WE FIND APPROPRIATE. THESE QUESTIONS WILL NOT BE ANSWERED. THANK YOU FOR UNDERSTANDING. ONLY PICTURED ITEMS ARE INCLUDED IN PURCHASE. WE WILL USUALLY SHIP WITHIN 1 BUSINESS DAY OF RECEIVING A CLEARED PAYMENT. Please take a look around our eBay Store and bid on your favorite items today! We post new items daily! Be sure to add us to your favorite sellers list! GOOD BIDDINGS! MB(43882)
|
|
|
Visit My eBay Store: eairtool_1 Visit My eBay Store: eairtool_1 You are bidding on a Rebuilt Pneumatic Chipping Hammer + 2 Chisels Model: CP-9363R Blows per Minute: 1900 Stroke: 3" Bore: 1 1/8" Shank Diameter: 680 Round Length: 14 9/16" Tool Weight: 15lb Air Inlet Thread: 3/8" CFM: 33-35 This Chipping Hammer comes with two new Chisels! This chipping hammer has been completely rebuilt to like new condition and is in great shape and great running order! Visit My eBay Store: eairtool_1 Powered by Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Works great. Includes 3 bits. Blue paint covers the opposite side. Thanks for looking.
|
|
Pneumatic Pavement Breaker by American Pneumatic Tool Model: APT 190 Chuck: 1 1/8" Hex X 6" 90lb Class Stroke: 6 1/2" BPM: 1200 Recommended Hose Size: 3/4" Recommended Air Pressure: 90 PSI This tool has been rebuilt to like new condition by a professional air tool mechanic. All of the parts inside have been replaced with new ones. Only the body is used but it has been reconditioned. It comes with a 30 day warranty and has a new set of grips. This tool will also come with 2 reconditioned bits. The bits are not shown in the pictures due to what is available at the time of purchase. If you prefer a certain type of bit. Just email me at the time of purchase and we will try to accomodate you with what is available at that time. It is sometimes possible to get a flat, moil point, ... morewedge, 2 to 3" wide flat or a 5 to 6" wide shovel bit with this tool.
|
|
Up for bid is this Hilti TE-905 AVR Demolition Breaker Jack Hammer W/ 5 Bits. Case and Manual. Pr eviously used with signs of normal wear n tear. Great. Working Condition! Pl ease look at all of the pi cture s. Sold As Is. Visit my eBay store by The auction includes what's pictured. Please see photos for more on condition! Shipping via FedEx Ground or USPS within the lower 48 States We DO NOT ship to HI. AK, AFO, APO or MPO Addresses. Insurance is included with all of my auctions at no additional charge. The maximum handing time is five business days. Sorry. No International Bids Accepted- we do not ship internationally. We only accept PayPal payments. No other payment methods will be accepted unless you are doing a local pick-up. Winning bidders who want to do a local pick-up can pay ... moreby cash or PayPal. Local pick-up customers will not be charged shipping and handling. But will be subject to a 7.4% sales tax. Returns are accepted for auctions unless otherwise noted above. I do have a return policy: Returns are accepted within 7 days. Refund is given as Money Back. The buyer is responsible for paying return shipping costs. Items listed AS IS are not eligible for returns. Good luck!
|
|
|
Vintage Black& Decker Electric Corded Hammer Drill Power Tool 1" Hex Works! Black& Decker Vintage Hammer Drill! GOOD USED WORKING CONDITION! COMES WITH THE FOLLOWING: MODEL NO. UNKNOWN! 1" HEX BUSHING HAS SOME WEAR TO IT. MEASURES AROUND 21 INCHES! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS! c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13eff77271c-0xf4-
|
|
PRE-OWNED) USED) CENTRAL MACHINERY 10 Amp 120 Vo lt DEMOLITION HAMMER#68148. SPECIFICATIONS With an impact rate of 3.100 BPM with 9 ft. lbs. of impact energy, this demolition hammer tears through concrete and mortar with ease! Features include a ball bearing construction for extended longevity, an adjustable 360 degree side handle and an ergonomic D-grip handle to give you full control. This jack hammer is great for landscaping or extensive home remodeling! High impact rate: 3100 BPM with 9 ft. lbs. of impact energy Adjustable 360 degree side handle and ergonomic D-grip handle Power cord: 16 ft. Specifications Name 10 Amp. 120 Volt Demolition Hammer SKU 68148 Brand Central Machinery Amperage(amps) 10 Handle type D-grip Impact(BPM) 3100 Impact energy(ft. lb. 9 Power source 120V. 20A circuit ... moreVoltage(volts) 120 Wattage(watts) 1050 Cord length 16 ft. ITEM WAS TESTED BEFORE LISTING IT& IS IN 100% WORKING CONDITION. THERE WILL BE A NEW YORK STATE SALE TAX RATE OF 8.875% AND IT WILL BE ADDED TO THE FINAL SALE PRICE FOR ANY NEW YORK BUYER. GOOD LUCK BIDDING! WHAT YOU SEE IN PICTURES IS WHAT YOU ARE BIDDING ON. WE PROVIDE CLOSE UP PICTURES ITEMS HAVE: THE FOLLOWING: PLEASE VIEW PICTURES FOR CONDITION OF ITEMS VERY LIGHT WEAR AND TEAR. LIGHT SCRATCHES. SCUFF MARK'S. ECT ON ITEM FROM NORMAL USE. IT IS YOUR RESPONSIBILITY AS A BUYER TO VIEW ALL THE PICTURES BEFORE BIDDING. PICTURES SPEAKS LOUDER THAN WORDS. PLEASE LOOK AT MY OTHER ITEMS SHOWING RIGHT NOW ON eBay. Any questions? Please feel free to email me or call me at 347-624-3796
|
|
|
LOCAL PICK UP ONLY Makita HM1810 70 LB Electric Breaker Demolition Jackhammer Demo Hammer 1100 BPM This Listing Includes the Hammer. Cart, and 2 Bits. The cord has been re-worked and has had another grounded plug installed. This item has been tested for proper operation prior to listing. It was tested for 30 minutes breaking up a concrete driveway. PLEASE Inspect ALL Pictures. And ask ANY/ALL Questions and/or Concerns Prior to Bidding/Buying. Have a look at our store for more deals! ITEMS are being added to the store and/or auction EVERYDAY! SWAP AND TRADE HAS A LITTLE BIT OF EVERYTHING. BOOKMARK US! SUBSCRIBE! Or Just Keep On CHECKING Back. You Never Know What We'll List NEXT! PAYMENT IS EXPECTED WITHIN 3 DAYS FROM WHEN LISTING ENDS. Thank You. Powered by Posted with
|
|
|
Digging spade for digging in heavy clay or light shale. The“D” handle and tool bit holder are shock and heat insulated for operator comfort. Flow range is 7-9gpm/ 26-34 lpm Working pressure is 1500-2000 psi/ 105-140 bar 2250 psi/155 bar full relief setting 1800 bpm 7/8 in X 3-1/4 in shank.
|
|
|
This is a Thor orbital sander model 930 in perfect working order. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14158d67d6d-0xfe-
|
|
|
THIS IS A BOTTOM WITH LATCH IN GOOD SHAPE FROM A BR 72 STANLEY HYDRAULIC JACKHAMMER SHIPPING WILL BE 11.50 IN CONT US ONLY I HAVE MORE PARTS FROM SAME JACKHAMMER WILL BE LISTED SOON
|
|
|
Makita HM1301 Demolition Hammer with 2 Chisels and Tough Metal Case Tested and working. Please see pictures for condition and for what is included. Thank you for looking. Please see our other items for sale.
|
|
|
For sale is a working used Denver Gardner s55 rockdrill 7/8" shank. Posted with
|
|
|
For sale is a working used Ingersoll Rand rockdrill with lightly used bit. Posted with
|
|
Black And Decker 5026 Power Sledge Electric Jack Hammer Breaker Up for auction is a Black And Decker 5026 Power Sledge Electric Jack Hammer Breaker. This item is in fair condition with some minor cosmetic wear from normal use. There are several scuff marks and scratches on the item but this does not effect the functionality of the item. The handles are in good condition with no cracks or chips. The power cable is in good condition as well. The bit connection is in good condition with no cracks or dents. Please refer to the photos below for more details on the item. This item was plugged in and powered on with no problems. We were able to squeeze the trigger without any issues and the item started up immediately. We could feel the air coming out of the bottom of the item. We unfortunately did ... morenot test this item to its complete functionality but from what we can tell we believe this item to be fully functional. Since we are unable to test the complete functionality of the item we are required to sell this item as is. Thank You. Good Luck, and Happy Bidding! ATTENTION INTERNATIONAL BIDDERS: Import duties. Taxes, and Customs charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. It is illegal to falsify customs documentation by changing the value or marking items sold as"gift" We will not accommodate any such requests. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011 24962. Powered by
|
|
|
The item you are bidding on is a used American Pneumatic Tools 35LB Air Hammer. This hammer is in good working condition. But does have wear and tear to the unit. Item is sold as is. Please consult all pictures before purchase. If you are looking for multiples, we have 3 additional units that are not currently listed. They are exactly like these models and are in the same condition. Message us if you are interested in more than one. Shipping quote is for the lower 48 states only. All others please message us for a shipping quote. Thanks
|
|
|
Very Early Thor Independent tool Company Pneumatic Hand Air hammer. I did hook an air line to it and air went through it I just don't know how this is suppose to work. Would still make a nice piece for a tool collector. Please feel free to ask questions and thank you for looking.
|
|
|
up for auction is a used IR PB breaker. Missing the guts.latch is good, no crakes on housing. Local pick up only, unless you contact us before you bid. Sold as is with no returns.
|
|
|
This is a used 80 lb. jackhammer that I bought as an extra at an auction. This has been refufbished at one time in the past.
|
|
|
This is a used concrete bushing bit that has a lot of life left in it. This has a square drive 3/4" x 3/4" Thank you For looking Check out my!
|
|
Wacker PPH16 hydraulic power unit and paving breaker(jackhammer) 70 lb class hand held hydraulic paving breaker(equivalent to 90lb pneumatic hammer) Includes manual. Flat-face quick-attach hoses, several bits and tamper. This machine can also be used to run other hydraulic attachments, such as drills, post pounders, saws, etc. Power is supplied by a compact. Highly portable hydraulic pump driven by Kohler 16 HP gasoline engine. Recoil starter, oil heat exchanger and filter, 4 point shock mounts, hydraulic gear pump, pressure and filter condition gauge, 2.4 gallon fuel tank, roll cage with wheels, and hydraulic oil level switch. Works well for cutting and breaking concrete and asphalt. As well as digging in frozen or highly compacted soils. The hoses weep(not spray) fluid a little. And should ... morebe replaced, but the unit itself runs fine with no leaks. This machine was just serviced and is ready to go to work. Original cost on this unit is over $8.000.00 This item must ship freight. No international shipping.
|
|
|
Up for sale here is a Thor Independent Tool Co Size 53 Pneumatic Air Jack Hammer Breaker w/ 3 Tips. Thor Independent Tool Co Size 53 Pneumatic Air Jack Hammer Breaker w/ 3 Tips. Used in good condition. Feel free to ask any questions. SCT3463
|
|
YOU ARE BIDDING ON A ATLAS COPCO JACKHAMMER COBRA PRO. JACKHAMMER IS IN GOOD WORKING ORDER- ITEM HAS BEEN TESTED. IT SHIPS WITH BIT ONLY AS SHOWN IN PICTURES. PLEASE VIEW ALL PICTURES CAREFULLY AND ASK QUESTIONS ACCORDINGLY! PLEASE ASK IF YOU REQUIRE MORE INFORMATION OR PICTURES. 131215-341-PAP) PLEASE ASK ANY QUESTIONS BEFORE BIDDING. I DO NOT SHIP OUTSIDE THE LOWER 48 UNITED STATES(USA) SO PLEASE DON'T ASK. ALL GEORGIA RESIDENTS MUST PAY A 6% SALES TAX. I ACCEPT PAYPAL AND CASHIERS CHECKS ONLY. PAYPAL IS PREFERRED! PLEASE CHECK MY OTHER ITEMS UP FOR BID AND ADD ME TO YOUR FAVORITES LIST. AS ALWAYS. POSITIVE FEEDBACK IS APPRECIATED. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE OR HAVE ANY CONCERNS, PLEASE CONTACT ME BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK. PAYMENT IS EXPECTED WITHIN 3 ... moreDAYS OF WINNING BID. UNLESS ARRANGEMENTS ARE MADE. WE WILL LEAVE FEEDBACK WHEN FEEDBACK IS RECEIVED FROM BUYER. THANK YOU FOR VIEWING MY BID. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144c4cd201f-0x117-
|
|
|
This sale is for an Ingersoll Rand concrete jack hammer. 25" long and quite heavy. Can only be picked up in Youngstown. OH(midway between Pittsburgh and Cleveland) Works, but as with any air type tool, quality would improve with rebuilding. Please see our other tools and equipment all listed at great prices. Must be picked up.Thanks!
|
|
|
bosch jack hammer electric with two bits and stand.good running condition.Cord is good shape.the tires on the stand needs some air in them.listed local pick up but if the winning bidder wants it shipped,i will drop it off at pak mail in athens,al for shipping after the bid price is paid for.you can deal with pak mail directly on the shipping and packing cost.pick up in ardmore,al is always a option as well.
|
|
|
You are bidding on a used but in good working condition Nitto Kohki CH-24 Chipping hammer. Great for demo on just about anything. It works great but it does have some surface rust on it from sitting on our tool cabinet for some years. It does have the chisel on in but comes exactly how you see it. Specs. 85 psi. 7.1 cfm. 4000 spm. Shank size is 1/2" square. Intake size 3/8" 3.7 lbs. Posted with
|
|
|
HILTI TE 905-AVR ORIGINAL HEAVY DUTY REPLACEMENT BOX CASE NO RESERVE! Original HILTI TE 905-AVR CASE in great clean used condition. All hinges. Locks and handle work great, no cracks. Has surface scratches and scuffs as shown in the pictures. Comes with 3 rubber sleeves as an added bonus. Works and functions great. Protect your hammer with this original case at a fraction of the price of a new one. $79.95 NO RESERVE USA based bidders only please. Shipping will be $45.00
|
|
Pneumatic Air Rock Drill by Sullair The Sullair drills are designed so that the tool automatically stops operating when the operator releases the throttle lever. The single throttle lever controls all tool functions from off. To blowing only, to progressive drilling speeds. Allows stepless speed control for maximum drilling production. Blowing air is directed through the drill rod at all drilling speeds to clear debris from the hole. This feature reduces torque loss and eliminates wearing parts. Such as the rifle bar assembly. The unique design of the Sullair drills eliminates many high wear parts. This means less loss of power due to wear. Less downtime to replace worn parts and lower overall maintenance costs. With only two parts moving during operation. A non-corrosive distribution valve, ... moreless radial piston movement and high tech alloys, the Sullair drills do not require special rock drill oil. Normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. A built-in oil reservoir assures direct lubrication to rotating parts. Use of standard 90-140 weight gear lubricant extends the life of critical parts. Model: MRD-50 Bore& Stroke: 3" X 2 5/8" Impact Rate: 1800 BPM Air Consumption: 99 CFM Air Inlet: 3/4" NPT Chuck Size: 7/8" Hex X 3 1/4" Powered by
|
|
Chicago Electric 46935- Pavement Breaker. Jack Hammer 17A w/Case Item came here to us at the pawn shop. We do not have personal use of it. Item is pre owned. In fair cosmetic condition Broken(doesn't power on) for parts or repair- no returns Bits are not included Picture is actual item you will receive. Please see pictures for best item description. Comes with everything shown in pictures. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding. We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all ... moreshipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 2-3 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concerns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-145006d1801-0x108-
|
|
Makita HM1500B 42 lb. Electric Demolition Jack Hammer Rock Breaker Pile Driver includes case as shown in photos- good working condition $ 1300 new Guaranteed 14 days or money back Overseas shipping thru Ebay Global Program Product Description Makita HM1500B Specifications:Blows per minute 1300•AMPS(115V) 13.5•Bit type 1-1/8 Hex shankMakita Features:Innovative pneumatic compression system automatically adjusts air in the cylinder to minimize power loss and deliver unmatched power-to-weight ratio•Special idling mechanism(patented) reduces hammering while idling•Rubber-ringed brush holder cushions vibrations and lengthens life of brushes and armature•Automatic brush cut-out system•Side handle swivels 360° for operator comfort and control•Anti-vibration main handle markedly reduced operator ... morefatigue•Powerful 13.5 AMP motor•Factory grease packed for approximately 200 hours of lube free operation•Accepts commonly used 1-1/8 hex shank bits and air tool bits
|
|
|
Hilti TE 805 Rotary Hammer Drill Demolition Breaker with BITS& CHISELS working good condition
|
|
Milwaukee Heavy Duty Electric Demolition Jack Hammer Model 5332 with Bits + Case This has been Tested and determined to be for repair or used as a parts unit. This powers on and works yet does not hammer the way it should. We do not do repairs and cannot advise on this at all. There are some flaws/wear in appearance. We have replaced 3 missing screws if you happen to notice this in the pictures. We also cleaned the Gear case and replenished it with Gear Grease! Please view the pictures and contact us anytime. We are always happy to help. Be sure to add me to your! Check out my! Check out my! Be sure to add me to your! Payment We accept PayPal. And we require payment within 24 hours of the purchase. If we do not receive payment within 24 hours of the purchase. The item will be re-listed this ... moreis due to consistent non-payment. Sorry. If you contact us we are more than happy to work with you. Shipping We do not ship on weekends or holidays. Sorry. All items 13oz or less are shipped first class. USPS. All other items will be shipped with Economy Shipping. Either USPS or FedEx. All items are generally shipped within 24 hours of purchase. Terms of Sale We accept returns on all of our items within 14 days of receipt of the item. If the reason for your return is because of a shipping or listing error on our behalf. We will pay the return shipping& New items returned to us with no fault of our own will be subject to a 25% restocking fee. About Us We are a company dedicated to providing fine products at an affordable price. We pride ourselves on our customer service. And satisfaction, and we want to ensure that you receive the best we can offer. We take great care to make your experience with us a pleasant one. If you have any questions please feel free to contact us. Contact Us You can call our store at(810) 391-2359. Our hours are Monday. Through Friday 9am- 8pm Eastern Standard Time. We ship everything from our store location at: G-3085 S. Dort Hwy. Burton. MI 48529 USA. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7
|
|
|
WACKER BH-23 GAS POWERED DEMOLITION JACKHAMMER W/CART& BIT RUNS- This machine is in good condition and runs. I recently tested this machine out on some thick ice that i had to bust up around a piece of equipment that was froze in water and it performed great. SELLING AS IS. Has normal wear on the body with scratches and scuffs. Call me if you have more questions and possible discount. My cell is 260-585-9114.
|
|
STANLEY HP-1 HYDRAULIC PUMP 149 HRS HONDA 20HP STANLEY HP-1 HYDRAULIC PUMP 378 HRS WITH BREAKER HONDA 20HP. LOW HOURS 149. STARTS RIGHT UP NO ISSUES OR LEAKS. 2 25 foot hydaulic hose. IN GREAT WORKING CONDITION. READY TO GO TO WORK. PLEASE EMAIL OR CALL WITH ANY QUESTION 718-698-8400. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD ... moreTO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
sullair chipping hammer 15 pound(broken for parts or repair) i have no ways to test this air tool.Got from a friend may work or not happy bidding sell as is. Shipping 48 states.
|
|
HILTI TE 70-AVR COMBI-HAMMER The next generation of Hilti TE 70 Combihammers unleashes incredible power and speed while maintaining maximum protection and comfort. With a powerful 1800W motor. The TE 70 makes hammer drilling, coring and chiseling through tough concrete seem easy. The best-in-class combihammer has been upgraded to include Active Vibration Reduction(AVR) These hard-hitting combihammers have proven time and again that they are the best in the business. And now the best have gotten even better. Applications Drilling in concrete. Stone and masonry with TE-YX(SDS Max) bits Drilling holes for rebar dowels and anchor bolts Through hole drilling and coring for mechanical and electrical applications Chiseling and demolishing concrete and masonry Outperform Active Vibration Reduction ... moreallows for less operator fatigue and more switched on time Active Torque Control helps protect user from twisting if drill bit catches Best power-to-weight ratio in its class results in unmatched productivity Outlast Rugged components and efficient cooling Glass-figer reinforced housing Low contact pressure and dampened hammering mechanism
|
|
Vintage Black& Decker 103 Type D 3/4" Electric Hammer Work Great Tool Collector Normal 0 false false false EN-US X-NONE X-NONE Vintage Black and Decker 103 Type D 3/4" Electric Hammer Work Great Tool Collector Item Up for sale is Vintage Black and Decker 103 Type D 3/4" Electric Hammer which is part of my dad’s estate. He had this for many years as far as I can remember. I used it a few times works great has some tools with it. As showed in the pictures. If you have any question please just email me. Item is in good cosmetic condition. There are minor scratches on the outer casing. And many of the screws still have some old, dried oil on them. The carrying case that comes with the hammer is similarly worn. All of these items are in original condition, and have not been modified(aside ... morefrom a light cleaning) Item powers on and works properly. NB: before use on any job. The instruction sheet recommends oiling the hammer, and then reapplying oil every 3- 4 hours Full Refund If You Are Not Satisfied Thank You EVERY THING I SELL WILL BE SHIP AS SOON AS PAYMENT IS MADE DEPENDING ON THE TIME OF DAY Thank You for looking Happy Bidding SERIOUS BIDDERS ONLY with positive feedback please look closely and ask any question. And I will get back with you as soon as I can. I WILL ONLY SHIP TO A USA& CANADA PAYPAL CONFIRMED ADDRESS No PO. Boxes"PAYPAL PAYMENT REQUIRED WITHIN 3 DAYS AFTER AUCTION ENDS" PLEASE EMAIL ME BEFORE LEAVING ANYTHING BUT A 5 STAR POSITIVE FEEDBACK EMAIL ME FIRST AND I WILL MAKE IT RIGHT THANK YOU Normal 0 false false false EN-US X-NONE X-NONE
|
|
HILTI TE905AVR Demolition Jack Hammer Feel the comfort and sense the sheer power of the Hilti TE 905-AVR- the breaker that takes all-round demolition performance to new heights. While keeping vibration to an absolute minimum. Thanks to Hilti's advanced AVR sub-chassis concept. This tool cuts vibration dramatically. Its pneumatic hammering mechanism, powered by a brushless SR motor, delivers tremendous punch for impressive chiseling performance on floors and walls. Incorporating three sealed lubrication chambers that keep dust out of internal parts for longer life and higher reliability. The TE 905 AVR is built to last. Product Description. Demolition of concrete and masonry. Working at floor level or below waist level- Corrective chiseling such as adjustments to door and window openings- ... morePenetrations for pipes. Air ducts and cables- Renovation of floors of all kinds- Special applications such as floor tile removal. Bushing Powerful demolition performance thanks to high impact energy- Symmetrical form with new grip design for perfect handling- Maintenance-free. Brushless SR motor and triple-chamber lubrication system for longer service intervals and longer lifetime Lowest vibration values in its class thanks to Hilti's AVR(active vibration reduction) sub-chassis concept. 1600 watts; 120 volts 0-1950 blows per minute 16.3 ft-lb single impact energy Chiseling performance up to 323 cu.Inch per minute
|
|
Elco Darda Hydraulic Splitter Unit#12 Description: Nice find here. And at a great price! This is the whole package- includes a splitter, 2 sets of expansion wedges, 2 sets of lines and a pneumatic pump- all fully operational and in good condition! This is everything you need to get started- don't worry about piecing together one of these packages, buy it all at once and get to splitting! One set of lines shows some dry-rot/cracking but still useable. Lines are around 25 feet long each. These splitters are near impossible to find used and even moreso at a reasonable price like this! If you're in the industry. You already know what this is and what it's worth, so don't hesitate to bid! See pictures& bid accordingly. Call our offices at 1-570-471-3069 with any questions! Condition: ... moreUsed Condition. Sold as-is. Where-is with no warranties: express or implied. Payment& Shipping: LTL Freight- should be between $100 and $200 to most locations within the US. Add $30 for residential delivery. Please inquire for an exact freight quote. Payment terms are cash. Check or wire transfer. No paypal or credit cards on this item. Call our offices with any questions at 570-471-3069. Local pickup is free& encouraged! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
WELCOME BIDDERS* You are BIDDING on A BRUTE BOSCH 0611304139 JACK HAMMER WITH CART& BITS Local Pick up ONLY! Does show signs of usage however fully functional- TESTED- 100% FULLY FUNCTIONAL EVERYTHING IS AS PICTURED Please Take the time to view ALL Photos and ask Any questions you would like answered. Thanks and Have a Great Day! Comes with FREE USPS priority mail BID WORRY FREE! Pictures are ACTUAL Pictures of the item you are BIDDING on! Please feel free to ask any Question and I will respond asap! Buyers: Please remember I have been a member of EBay for some time now and have great scores and am working hard daily to exceed expectations. Please leave Positive feed back on your experience of your purchase and I'll will do the same. Negative feedback is Never necessary! If EVER any ... morediscrepancy Feel free to communicate. THIS IS KEY! This Item Will Sell in a AUCTION STYLE SETTING The BIDDING Will Start at a"PENNY" And Go On For( 7) Days*GOOD LUCK BIDDERS*
|
|
|
HILTI TE 50 ROTARY HAMMER DRIL Comes with Case.Manual&3 bits, One is New Features Lightest combihammer in the TE-Y class(SDS Max) Top performance with extremely compact design Maximum operating comfort due to perfectly balanced. Ergonomic design Rugged and durable Rotation speed gear 1 under no load: 550 rpm Full hammering frequency: 3180 impacts/minute Single impact energy: 3.8 ft-lbf
|
|
|
Up for bid is a large lot of bits and two jack hammers I can arrange shipping to anywhere. Listed below is the bits I have. The hammers worked when I last tried them and since have been out of the weather. No reason they will not operate. Most minus a few are brand new. Two hammers $150 List of bits: 1 1/4 shank(10) 5" wide chis(7) 3" wide chisel(4) 2" wide chisel(9) Pointed chisel Total of 30 On Jan-26-14 at 12:37:34 PST. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
Today we have for Auction a very nice and in Excellent Working Condition a Milwaukee SDS-MAX Demolition Hammer 5339-20 see pictures This Item has some sings of use but looks very nice and works even better! It comes with a two auxiliary handles. 4 mixed chisels as you can see in pictures gallery, also comes with a carrying case. Detailed item info Product Information The Milwaukee 5339-20 is capable of working on many surfaces and of performing a variety of tasks. The in-line design of this Milwaukee electric hammer makes working on floors very comfortable. The vibration absorption/reduction feature of this demolition hammer reduces your fatigue noticeably. You can also attach the side handle of the Milwaukee 5339-20 to the rear switch handle for reduced bending over. The soft grip provided ... moreby this demolition hammer’s handle gives you added comfort. The SDS-max bit holder system of this Milwaukee electric hammer lets you position the chisels in the most efficient way. Product Identifiers Brand Milwaukee Model 5339-20 MPN 5339-20 UPC Key Features Drill Type Hammer Drill Power Connectivity Corded Voltage 120V AC Technical Features Battery Amps 14 Amps Auxiliary Handle With Dimensions Weight 24.2 lbs Miscellaneous Additional Information Heavy-duty robust construction. High blow energy 19.9 ft-lbs, In-line design with 3 side handle positions and d-handle, Lock-on trigger, Soft-grip on all handles, User friendly vibration isolation system, Uses standard SDS-Max hammer iron, Variable speed control dial FEATURES: High Blow Energy 19.9 ft-lbs• User Friendly Vibration Isolation System• Heavy-Duty Robust Construction• In-Line Design with 3 Side Handle Positions Variable Speed Control Dial Service Reminder Light Soft-Grip on All Handles Lock-On Trigger SPECIFICATIONS: Voltage 120 AC Only• Amps 14.1• Steel Type SDS MAX• Impact Energy 19.9 ft-lbs• No Load BPM 975-1.951• Electronics Yes• Adjustable Chisel Yes•Anti-Vibration Yes•Bit Shank Type SDS MAX•Cord Type 10 ft. Fixed Large electric hammer used for bre
|
|
|
This auction is for a Atlas Copco Pico 14 gas powered Jack Hammer/ Drill. Unit has paint missing from being laid down. Handle can be used on right or left side. Center handle adjusts also. Unit runs good. I don't have a bit to try in it so I can't tell you how it drills/hammers. Comes with a metal case and parts list. Actual shipping. No handling charges. Boxed weight 50lbs 12x13x34 shipped from 57110. Will ship FedEx Ground to a home or business address. You can go to there website for a shipping quote. After the auction is over wait until I fill in and send you a invoice. Local pick-up is fine. I have a few extra of these I will be listing. Sold as is. Thanks for looking.
|
|
|
hammer shows signs of being worked and used like all this style of equipment the rubber handle on on side is missing but was told all the handles come off with use rubber handle still adv being sold as is no returns also comes with one bit
|
|
For sale is a Atlas Copco Pico 14 Breaker/ Drill Combo. Unit is in great condition and is fully functional. Unit was just serviced. Repaired/ replaced was the carburetor with a overhaul kit. New fuel lines, fuel filter, spark plug and the rewind starter was repaired Comes with 2 bits( chisel and point) and a wooden storage box. Pictures do a great job showing the overall condition of the machine. Great little unit. Bid with confidence. Note- For shipping reasons all fuel has been drained from the fuel tank and the carburetor has been ran dry. Fuel mix for this unit is 25:1 This item does have a 7 day money back return. I try to describe the item as best as I can so please contact me if you have any concerns. Questions or need more pics. Also I will do my best to ship within 24 hrs after payment ... morehas been received.
|
|
|
Makita HM1800 Jack Hammer with 3 bids Item is used but is in good working condition. Please view pictures for more details. Features: an innovative pneumatic compression system that automatically adjusts air in the cylinder to minimize power loss Special idling mechanism prevents hammering while idling Hi-impact resistant housing cover insulates heat for more comfortable handling Innovative shock absorbing handle minimizes vibration transmission Automatic brush cut-out system
|
|
|
HILTI TE76P ATC Rotary Hammer Drill Demolition Breaker Jack Hammer Combination Unit has not seen heavy use In Very Good overall Condition We Ship via UPS FREE USA SHIPPING TO LOWER 48 STATES We Accept Paypal
|
|
|
WELCOME TO 1012MERIDENRD- UP FOR AUCTION(1) USED* HILTI TE 905 AVR DEMOLITION BREAKER JACK HAMMER WITH ORIGINAL HILTI CARRYING CASE. THIS ITEM IS USED BUT IS IN GREAT PHYSICAL AND MECHANICAL WORKING ORDER( TYPICAL WEAR) AUCTION INCLUDES HILTI TE 905 AVR DEMOLITION BREAKER JACK HAMMER- HILTI CARRYING CASE AND ONE BIT. BID WITH CONFIDENCE! WE OFFER OUR DISCOUNTED SHIPPING ON THIS ITEM! PAYMENT DUE WITHIN 3 DAYS OF AUCTIONS END!
|
|
Wacker Magic Electric Drilling Chisel Demolition Hammer Drill w/ Case& Bit Up for bid is a good working Wacker Magic demolition hammer drill with a carrying case and bit. Payment: PayPal ONLY Payment must be made within 3 days after the end of the auction. Shipping: I only ship to CONFIRMED addresses NO PO boxes no exceptions. Shipping price listed is for the 48 contiguous states. NO INTERNATIONAL…NO CANADA OR HAWAII Local pick-up is GREAT. I WILL SHIP FEDEX GROUND. I AM NOT RESPONSIBLE FOR FEDEX LEAVING YOUR PACKAGE ON THE FRONT PORCH. AT THE DOOR, ECT. If the auction ends up over $200. Per my own policy I will be adding signature confirmation at no additional cost to you so make sure the address you have me ship to someone over the age of 18 will be home to sign for the package. I can ... morenot and will not take off the confirmation so please do not ask. I ONLY SHIP PACKAGES MONDAY- FRIDAY. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return. I do my very best to describe items to the best of my ability and send them out ASAP. I will always try my best to make your shopping experience a pleasant one. I will leave feedback as soon as feedback is left for me! Again. Ask any questions you may have before bidding on any items! Do not assume anything. If it is not shown in the pictures or written in the description, chances are, it does not come with it!In the case of a refund, shipping charges will NOT be refunded, Buyer is responsible for return shipping!
|
|
Ingersoll Rand Chipping Hammer size W1- 19" long- weighs 15 pounds- Made in USA I am selling this as untested AS IS. The only information I have is what is on the tag. I do not see a model number. Please view the pictures. Selling for parts or repair. Please use the zoom and enlarge feature to get a closer look. For Parts or Repair! Being sold AS-IS with No Returns. No Returns/ No Exchanges/ No Refunds* Bidding starts at 99¢& there is No Reserve price. Please ask any questions you have about this item before placing your bid. We ship Monday thru Friday to the United States only. In most instances we ship within 24 hours of payment. Payment must received within 3 days of auction end. Check out our other items! We will gladly combine shipping whenever possible. This is a No Reserve ... moreauction. Great customer service is the foundation of my business. Thank you and happy bidding! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14543567a18-0x113-
|
|
|
Professional Demolition Breaker Set Hammer with Cart Good condition Professional Demolition Breaker Hammer Breaker Hammer Cart 20 Amp 125V Power cord pigtail adapter to use with standard plug. Chisel Bit LOCAL PICK-UP IS OK. If you are within about 150 miles from 53168(Salem.WI) I will also deliver/meet up halfway for a fee. Message me and we can work something out.
|
|
Factory Reconditioned Milwaukee 5339-81 2 in. SDS-max Demolition Hammer with Case DETAILS Ergonomic inline d esign lets you dig and drill more comfortably. The 2 in. SDS-Max Demolition Hammer delivers 19.9 ft-lbs. of blow energy for drilling large holes in concrete or asphalt. Bushing, driving ground rods, scraping floors, digging and tamping. The inline design offers more comfortable operation, and the soft-grip side handle can be attached to the rear switch handle to minimize bending. Milwaukee’s unique Anti-Vibration System provides added comfort by minimizing vibration. Along with a sophisticated electronic feedback system that offer consistent operation and overload protection. Features: Powerful 14 Amp motor delivers 19.9 ft-lbs. of blow energy· Heavy-duty robust construction tackles ... morethe most demanding jobsite conditions with ease· Comfortable inline design with three side-handle positions and a soft-grip D-handle for ultimate comfort· Variable-speed dial maximizes user control to match the application· AVS Anti-Vibration System minimizes vibration for maximum comfort· Service reminder light indicates when service will be needed· Lock-on trigger enhances safety and peace of mind· Uses standard 3/4 in. hex hammer steel· This item may ship in the original manufacturer's packaging. Includes: 2 in. SDS-max Demolition Hammer- 5339-81· 2) Auxiliary Handles· Carrying Case· Product Manual SPECIFICATIONS Length: 27.5 in. Weight: 24.2 lbs. Amperage: 14 BPM: 975- 1.950 Chuck Type: SDS-Max Cord Length: 10-ft Impact Energy: 19.9 ft-lbs. Power Type: Electric Shipping Weight: 48 lbs. Voltage: 120V
|
|
HELLO! UP FOR YOUR CONSIDERATION IS A Kango 950 Concrete Jack Hammer Demolition Breaker Drill Works Great! PLEASE INDULGE IN ALL(5) PICTURES. PLEASE ZOOM IN FOR ITEM CONDITION. CONDITION OF ITEM: JACK HAMMER IS IN GOOD COSMETIC CONDITION WITH SOME SCRATCHES AND DENTS FROM NORMAL USE BUT IN PERFECT WORKING CONDITION. CABLE AND PLUG HAS BEEN REPLACED AND IS IN PERFECT WORKING CONDITION. SHIPPING& HANDLING: PLEASE GO TO THE SHIPPING AND PAYMENT TAB FOR A QUOTE IN YOUR AREA BEFORE PURCHASING/BIDDING ON ITEM. PLEASE BE INFORMED WE DO OFFER AT LEAST 2 OPTIONS FOR SHIPPING ON OUR ITEMS: PRIORITY 1-3 DAY. PARCEL 2-9 DAYS. INTERNATIONAL BUYERS FIRST CLASS INTERNATIONAL OPTION IS NOT AVAILABLE FOR ITEMS WORTH MORE THAN $20 DUE TO THESE PACKAGES CANNOT BE INSURED. INTERNATIONAL BUYER WELCOME. BUT ... morePLEASE BE INFORMED WE ARE UNABLE TO MODIFY CUSTOMS FORMS TO AVOID CUSTOMS FEES. PLEASE NOTE: IMPORT DUTIES, TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER’S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY’S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. ALSO CHECK IF THIS ITEM WOULD BE ON THEIR PROHIBITION LIST. WE DO OFFER COMBINE SHIPPING AND LOCAL PICK UP. JUST INFORM US AND WE WILL GLADLY WORK WITH YOU! IF YOU WOULD LIKE A SHIPPING QUOTE OR HAVE ANY QUESTIONS REGARDING SHIPPING PLEASE EMAIL US! PAYMENT: PAYPAL PREFERED AND ACCEPTED! PAYMENT WILL BE EXPECTED WITHIN 4 DAYS OF PURCHASE. BY THE FOURTH DAY EBAY WILL AUTOMATICALLY OPEN A NON-PAYING BIDDER CASE, IF PAYMENT IS NOT RECEIVED THIS WILL BE RECORDED AND WORK AGAINST YOUR ACCOUNT. PLEASE BE INFORMED FLORIDA RESIDENTS WILL BE CHARGED 7% TAXES ON THEIR PURCHASE. IF WE WISH TO CONTACT YOU REGARDING THE STATUS OF TRANSACTION AND DO NOT HEAR FROM YOU. WE WILL CANCEL THE TRANSACTION AND IMMEDIATELY RELIST ITEM. IF YOU SHOULD NEED MORE TIME TO PROVIDE PAYMENT PLEASE DON'T HESITATE IN LETTING US KNOW VIA EMAIL. WE WILL GLADLY WORK WITH YOU! RETURNS: PLEASE IF YOU WISH TO RETURN YO
|
|
|
You are considering a lightly used Central Machinery Electric Demolition Hammer Model 68148. This Demolition Hammer comes complete with the handle. 2 bits, manual and case. Local pickup only.
|
|
|
I purchased this tool at a estate sale. I know absolutely nothing about it. That it why I am selling it for parts or repair. It took me some time to even figure out what it is. Make me a reasonable offer. Shipping is calculated. Shipped in the US only. Fast shipping. There is two choices of shipping. Payment is expected immediately. Thanks for looking.
|
|
|
Vintage Thor Electric Hammer Carrying Case Good condition. No damage. But shows signs of age and wear(see photos) Nice graphics. Case only
|
|
|
Up for bid is a Bosch 11202 Demolition Hammer Drill. It comes in the case with two carbide tipped. Spline shank bits(1/2" 3/4" depth gauge, and instructions. It is in working condition, has scratches, engraving, and residue on the drill, and scratches, dings, and surface rust on the case. Please ask any questions you might have. Make sure to look at the other tools that I currently have listed. I mainly use Fed Ex even though the calculator shows it as UPS. The price will remain the same. I get far better service from them than UPS.
|
|
You are Bidding on a lot of Metal Chisels Specialty for Jack hammer or Large Hammer Drills No Makers Marks Good Condition Please Look closely at the photos See Pictures for other details Please read the descriptions carefully. If you have questions please ask as I do not take returns. Shipping Info: The cost of shipping is calculated by The United States Postal Service. I enter a weight and USPS calculates the cost by weight. Package size and the distance it has to travel. I do combine ship on multiple items purchased I ship USPS Priority. Please note: Once an item leaves my facility I have no control over how long it takes to be delivered to you. Note to overseas bidders: I do not decide the cost of shipping over seas the United State Postal Service Does. In some cases. Shipping items parcel ... morepost is not an option due to weight, Package size, or country of destination. So Please do not blame me for the high cost of over seas shipping. For over seas shipping it can take up to 16 weeks for your item to arrive. I can only communicate in english Posted with eBay Mobile Posted with
|
|
2007 DARDA ELCO HYDRAULIC ROCK SPLITTER HAMMER MODEL 12s. WORKS GREAT 2007 DARDA ELCO HYDRAULIC ROCK SPLITTER HAMMER MODEL 12s. WORKS LIKE NEW. THIS UNIT HAS SEEN VERY VERY VERY LITTLE USE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING ... moreA NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
The following item consist of a used PARTNER K 1200-II PROFESSIONAL CONCRETE CUTTING SAW for parts or repair. Saw had the pull cord break about 3 years ago and just put away. The cover with pull cord was lost and will need to be repalce but other than that all parts are there and turning freely. Unit comes with only whats seen in pictures and sold as parts or repair as is. Don't miss your chance of owning this professional unit for a fraction of the price. see pictures for item's condition(photos always say more than I can) BUYER TO PAY $35.95 SHIPPING. OR CAN PICK UP.
|
|
T This was bare used only and all in like new cosmetic and 100% working order. The hilti TE-1500 AVR jack hammer breaker kit, it's actual items photo and come as you see from the pictures and that including: hammer, side handle, two flat chisels: 1-1/4"W x 13" 3"W x 19" one new pointer 13"L, grease tube, manual ans case, the parts#3455943 of this kit and the price listed $2,249 plus tax& s/h extra, has minor wears on it only but no serious scratch no personal marking nothing chip or crack, all in near new condition, absolute working as new one, supper clean item and ready work for you without issue that I guarantee it, buyer with satisfaction or return to refund be guaranteed, international shipping welcome but i am not sure it can be shipping to any country ... moredue to size or weight limited so please contact me if you are oversea bidder, the buy it now at $1,749 only here Take your productivity in floor removal and concrete demolition to a whole new level with the new Hilti TE 1500-AVR Breaker. With 22 foot-pounds of impact energy. The TE 1500-AVR is Hilti’s most powerful breaker ever. For downward breaking in floors, slabs, or foundations, the TE 1500-AVR breaks the rules of what was previously possible. With the innovative Hilti Brushless SR Motor, the TE 1500-AVR not only possesses tremendous impact energy, it also is designed for extended durability and all of this power does not come at the sacrifice of comfort and weight. The TE 1500-AVR boasts a best in class weight to power ratio. Along with Hilti’s advanced AVR sub-chassis concept, this tool cuts vibration felt by the operator dramatically. The Hilti TE 1500-AVR– breaking the rules; not just rewriting them. For a limited time, get a free 18-Volt Lithium-Ion Cordless 2-Tool Combo Kit with your purchase. It includes the SID 18-Volt Impact Driver and the TE 2 Cordless Rotary Hammer Drill. This great offer for pros will not last long. Sub-chassis active vibration reduction achieves the lowest vibration in its class, New brushles
|
|
|
YOU ARE BIDDING ON THE HILTI TE 1500 AVR BREAKER DEMOLITION HAMMER JACKHAMMER WITH CASE AND 4 BITS. This tool has been used as can be seen in the pictures. It operates great and has a tremendous amount of power. it comes exactly as you see it in the pictures with the 4 bits. Any questions please let me know, Thank you and a wonderful day Posted with
|
|
STANLEY HYDRAULIC HAMMER FOR LARGE BACKHOES/MIDSIZE EXCAVATORS. MODEL MB875. ENERGY IMPACT: 1.000 FT-LB INPUT FLOW 22-30 GPM. 3-1/8" TOOL DIAMETER WEIGHT:1100 LB(500 KG) NEW TOOL(UNVERIFIED) EX-ARMY OWNED. FITS TO MANUFACTURER: 580/590 CASE. 416/426 CATERPILLAR, 310/410 DEERE"WE CAN LOAD. WE CAN PUT ANY MACHINE INTO CONTAINERS" Hablamos Espanol: Exportamos a Mexico! SEVEN HILLS MACHINERY. LLC SEVENHILLSM.COM. PH 915 613 2646 FX 915 808 1238. El Paso. Texas 79901 USA. TERMS All items are sold"AS-IS. WHERE-IS" Items are described to the best of our knowledge, however, we(Seven Hills Machinery,LLC and/or the SELLER) make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value ... moreor condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
|
|
|
For sale a HILTI TE 3000-AVR BREAKER HAMMER w/ 2 BITS& hauler. Has some use marks(scratches and scuffs) Used in very good working condition. What you see is what you get. See photos for more info.
|
|
Up for sale is a HMI power pump II that we have modified by increasing the hopper height to service more material handling capabilities. There is nothing at all wrong with this pump other than the fact that it sits idle while my concrete business has abruptly grown. Not leaving me any time to slab-jack or as many others call it: Mud-jack. Along with the pump comes the standard 5 foot(2" material injection hose. 2 of them actually) as well as 2 additional 12 foot sections of 2" high pressure grouting hose and associated connection collars. There is also a Pionjar Berema 120 Drill/Breaker with a few drill shanks and bits. Anyone wishing to get into the slabjacking business without putting high dollars out for new equipment might be interested in considering my equipment. I also have ... moreavailable a steak body truck. A material box that holds roughly 5 cu/yds of material, and ramp for running the pump up on the truck. A worthy note here would be to let people know that this pump is hydraulically self driven, can fit between a standard 29 inch door opening, and has no problem pulling a 30% grade filled with material. This was our 4th pump from HMI Mud-pumps over the past 20+ years. We have serviced extensively in the NY. NJ and PA area and made alot of money. The only product material ever ran through this pump was fly ash and cement. Never have we used pea gravel or highly abrasive materials. Additionally if you are local to the Allentown Pa area, and have a tri-axle truck( tandem will work as well) we can help you out with your first load of fly ash for no charge and direct you on the proper application of this process, also, I can more than likely throw a nice amount of work your way, as we have over 20 years of past customers who occasionally re-call us for slab-jacking services, I would be happy to direct those calls to you. This auction is for the Pump and the Drill alone. Any interest in the truck would be a private telephone call You can come to our shop in Allentown and we can help you to loa
|
|
|
Used good condition. Will contain scratches and scuffs. We wipe down the item as best we could, will contain slight Dust in some creases and crevices no tool included. Used empty carrying/storage case. If you are unsure of something please do not assume anything. Ask questions before you buy thank you,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1455cc15149-0x106-
|
|
I am selling a Berema FB60 Gasoline Jack Hammer. This set up is in good working condition and ready to go to work. It has several scrapes and scratches from use but this obviously does not hinder performance. It includes the cart and one shovel bit. This unit starts up very easy and hit very hard. The priming button has a hole in it but It has not hindered it turning on. This is a great unit to have when doing demo work where no power is available. This set up retails for about $3500. Here is your chance to save some money! I would prefer not to ship this unit out as it's heavy and a hassle. I can however load it on a pallet and take it to a local trucking company. Shipping charges would be between buyer and trucking company this way you only pay what the company charges. SHIPPING COST ... moreWILL BE AT BUYERS EXPENSE AND RESPONSIBILITY. If you choose to pick up locally I will only ACCEPT CASH at the time of pick NO EXCEPTIONS. Payment: Paypal Shipping: I only ship to CONFIRMED addresses NO P.O. BOXES NO EXCEPTIONS. Shipping price listed is for the 48 contiguous states. If you live outside the Continental US contact me for shipping quotes as they will vary. I ship quickly.once payment is received; the item is shipped within 1 to 2 business days in most cases. I do not ship on weekends unless prior arrangements are made. Local pick-up is fine. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return. I do my very best to describe items to the best of my ability and send them out ASAP. I will always try my best to make your shopping experience a pleasant one. I will leave feedback as soon as feedback is left for me! Again. Ask any questions you may have before bidding on any items! Do not assume anything. If it is not shown in the pictures or written in the description, chances are, it does not come with it! ASSUMING MAKES AN ASS OUT OF U AND ME! I will charge a $25.00 restocking fee for any one who backs out of a purchase. In the case of a refund shipping charg
|
|
|
RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14567137ea0-0x110-
|
|
Description Check out my other items! Be sure to add me to your favo rites list! PLEASE READ THE WHOLE DESCRIPTION IT WILL ANSWER MOST QUESTIONS. ALSO ANY DEFECTS NOT MENTIONED BUT VISIBLE IN THE PICTURES WILL BE CONSIDERED AS DESCRIBED. For Sale now we have a Bosch 11316EVS demolition hammer in great working shape. This item has been double tested and it is in excellent working condition. This item is variable speed as you can see in the photos provided. There is very little wear and tear for a used tool. This item does come in the original Bosch case with the 3 attachments pictured in the pictures provided. This is a great tool to have for the jobsite. Start your bidding today while you still have the chance. If you have any questions prior to purchase please feel free to ask. Thanks for ... morereading our description! Payment· Buyer has 3 days from close of auction to make arrangements for payment. California Residents Pay 8% sales tax. No exceptions. IF BUYER DOES NOT PAY AFTER WINNING ITEM. WE WILL OPEN AN UNPAID BUYER CASE AGAINST YOU! Shipping· International shipping: Expedited shipping only. Please provide a phone number for shipments, Large items will not be shipped internationally. Ex. Anything with over 8inches x8inches x8inches dimensions will not be shipped; Domestic anywhere in the 50 states Flat Rate Shipping is only for the lower 48 of the United States. Please message for details on how much it will cost to ship to any of the other States or Territories. Any Fees or duties for shipping outside the US must be paid by the customer! Local pick up always available(no pickup charge of course) Most items shipped within 24 hours through UPS ground but please give us a maximum of 72 hours. Smaller items shipped via USPS priority. Insurance is always included in every shipment! Terms of Sale· We sell in both auction and buy it now formats. If the item is in an auction format please do not ask us for a buy it now price. Only what you see pictured is what you get· If it is not listed in the auc
|
|
|
Used Milwaukee Heavy-Duty Demolition Hammer 5345-21. Call Rick for details at(708) 415-1801.
|
|
|
Good working kango 900k electric jack hammer demo tool
|
|
Hilti TE705 Demolition Hammer Breaker in Case TE 705_2 35233 Description Hilti TE705 Demolition Hammer Breaker in Case Condition: Good used. This tool is in great working condition. It shows normal marks. Scratches and wear from regular use. Comes with pictured chisels that are worn, and case. PLEASE READ BEFORE BIDDING SHIPPING We ship to PAYPAL ADDRESSES within the UNITED STATES. Please be sure the address in your PayPal account is correct PRIOR to bidding. We will not be responsible for changing the package destination once item has left our shipping department. Our items are shipped via UPS. Please DO NOT ask us to use another service. No PO. FPO, APO, or PMB Boxes please* For the protection of both the buyer and seller. We require an adult signature. If you have any concerns please email ... moreus before placing a bid. PAYMENT Payment is required in full via PAYPAL within 7 days of the end of the auction. Sales tax applies for local and shipped purchases in the state of Arizona. TERMS of SALE All auction pictures are of the actual item or items for purchase and are in good working order. Unless otherwise stated. Most of our auctions start at $.99 with no reserve. We stand behind our products. If for some reason you have an issue with the item you have received, please email us. We offer a 100% money back guarantee. Please contact us within three(3) days with any issues. All returns require an inspection to verify the reported issue. Items must be returned in the same condition that they were received. We require confirmed return delivery on any returned item. If the item was damaged in shipping, please notify us immediately and we will assist in filing a claim. Our goal is to have a smooth transaction with our customers. Satisfied with their purchase. Please contact us with any issues before you leave a negative or neutral feedback. Once the transaction is completed we will leave feedback for our buyer. To contact us. Please use the Contact Seller option in eBay. Thank you for viewing our auction.
|
|
|
Great working spike driver. 5 to 10 GPM. 2000 PSI. Weighs about 70 lbs.
|
|
|
you get the dolly and 2 bits with this hardly used Hilti TE 3000 AVR Breaker Hammer Jack Hammer 120V Jackhammer used on 3 jobs only- NO RESERVE- FEEL FREE TO ASK QUESTIONS- BID WITH CONFIDENCE CHECK MY FEEDBACK- SHIPPING IS FREE! USPS WITH DELIVERY CONFIRMATION;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14573f137e8-0x114-
|
|
|
Stanler BR 45 Hydraulic Breaker Description. Used Stanley BR45 Hydraulic Breaker. Flow 7-9 GPM. Press 1500-200 PSI 600 PSI Nitrogen. Tested Work With My Pump My Pump Is Not 2000 PSI. Will Ship This Item UPS Ground. Light to Medium duty underwater hydraulic breaker, Used for light concrete breaking. Small rock breaking, coral removal and rod driving, Feathering On/Off valve to control speed, Strong tie bolt design for durability, Trouble free diaphram accumulator to provide added punch and reduce recoil, TOOL BIT SIZE: 1 x 6 in. see below to order) HYDRAULIC FLOW: 7-9 gallons per minute, WEIGHT: 50 lbs, LENGTH: 25" WIDTH: 14" CONNECTION: 3/8" NPT Hose Whips,
|
|
|
This hammer is in great condition it works great my uncle used a couple of times he used to do masonary work.He put in the box forgot about it.Till i saw it.the box is in not such great condition i can send or not you decide.any questions please ask
|
|
|
Up for sale here is a Pittsburgh Pneumatic Co S-72662 Pneumatic Air Jack Hammer for Rebuild. I hooked it up to the compressor and it didn't hammer. It should be a good tool for rebuild. Feel free to ask any questions. SCT3694
|
|
HILTI TE-500 AVR SDS MAX(BREAKER) FREE CHISELS. FREE HILTIPROS T-SHIRT, FREE HEAVY DUTY KNIFE, AND FREE KNEE PADS! Amperage(amps) 9 Assembled Depth(in. 9.6 in Assembled Height(in. 18.5 in Assembled Width(in. 4.3 in Blow energy(ft.lb. 5.5 Blows per Minute 3180 Cart Included No Chuck Size 3/4 In. Chuck Type SDS-Max Color Family Red Impact Energy(ft.lbs) 5.5 Manufacturer Warranty Hilti Lifetime Service. 2 Years No Costs Warranty Power Tool Product Type Demolition Power Type Electric Reconditioned No Returnable 90-Day Side Handle Yes Start Type Electric Tool weight(lb. 11.2 Variable Speed Yes Vibration Control Yes Voltage(volts) 120 CHECK OUT MY FEEDBACK AND BID WITH CONFIDENCE! PLEASE CLICK TO SEE MY OTHER AUCTIONS AND ADDITIONAL ITEMS IN MY EBAY STORE. BUYER IS RESPONSIBLE FOR READING AND UNDERSTANDING ... moreALL POLICIES( YOU CAN BUY WITH CONFIDENCE. 100% SATISFACTION OR YOUR MONEY BACK. PLEASE FEEL FREE TO ASK ANY QUESTION OR CONCERNS. WE WILL GLADLY ANSWER. INTERNATIONAL BUYERS? WE DO NOT SHIP TO SOUTH AMERICA(BRAZIL. PERU, VENEZUELA, ETC. IMPORT DUTIES. TAXES AND CHARGERS ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGERS. THESE CHARGERS ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING/BUYING. WE DO NOT MARK MERCHANDISE VALUES BELOW VALUE. US AND INTERNATIONAL GOVERNMENT REGULATIONS PROHIBIT SUCH BEHAVIOR. PRIOR TO PURCHASE. PLEASE EMAIL US TO CHECK HOW MUCH THE SHIPPING COST ARE FIRST. WE WILL GET THE BEST PRICE OF SHIPPING TO ANY COUNTRY. THANKS. PLEASE VISIT OUR STORE AT WWW.HILTIMASTER,COM PAYMENTS: PayPal PAYMENTS MUST BE MADE WITHIN 4 DAYS AFTER THE PURCHASE. IF PAYMENT IS NOT MADE AFTER 4 DAYS. WE WILL NOTIFY EBAY FOR NON PAYMENT AND RELIST THE ITEM. SHIPPING: WE ONLY SHIP TO CONFIRMED ADDRESSES. SHIPPING PRICE LISTED IS FOR THE THE 48 US CONTIGUOUS STATES ONLY. PLEASE CONTACT US PRIOR TO PURCHASE IF YOU LIVE OUTSIDE THE CONTINENTAL
|
|
|
Heavy Duty Demolition Hammer This Hammer is a one owner in very good condition Black& Decker Model# 5052 with bits and carrying case wery well taken care of
|
|
|
Atlas Copco Handheld Breaker/ Jack Hammer Up for sale is a pre-owned jack hammer It looks to be in good condition but it is untested If you find an issue I will give you 2 weeks to return it Actual photos Sorry I can only answer emails during business hours 9:30 to 5 pm est time Mon-Tues. Thurs-Friday 10:30 to 4 Saturday Local pickup is always welcome inkfrogproseries. We ship to the US only Connecticut residents must pay sales tax of 6.35%Payment is due within 48 hours of auction close. We welcome local pick up in our Groton Ct store. If you would like to pick it up in our store please email me ahead of time so I can put it aside. Sorry we do not take Paypal on local pickups. inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
I used this Pneumatic Bumper jack in my Auto Body Shop for several years. It functions good with no problems. I've since sold my shop and have no use for this jack anymore. This cannot be shipped. It would have to be picked up.
|
|
|
I HAVE A USED HILTI TE 905 AVR JACKHAMMER. IT IS MADE IN LIECHTENSTEIN. IT IS USED AND IN PERFECT WORKING CONDITION. RUNS VERY STRONG. HEAVY DUTY. I WILL INCLUDE 2-NEW BITS. YOU WILL DESTROY CONCRETE WITH THIS JACKHAMMER. BUILD TO LAST. AS SOON AS YOU PAY I SHIP VERY FAST.
|
|
Up for sale! HITACHI DEMOLITION HAMMER MODEL H 65 with Extras Two attachments.Please look at the pictures The unit works well.Some cosmetic issues,look at the pictures,it has no influence on the performance.The latches on the case are broken.Please, be aware that there is no oil, since it is prohibited to send it with oil,add oil prior to its use. Payment must be forwarded within 3 days from the date of sale! You are buying what you see in the pictures! Please.Ask questions before bidding*I will ship the item within 24 hrs from receiving the funds*Item can be returned for refund within 14 days.Buyer pays the return shipping*If you have any questions.Please do not hesitate to email me, I will answer to the best of my knowledge*Please. Contact me in case of any problems before leaving a negative ... morefeedback,I will try to help you to solve the problem*Buyers from Hawaii.Alaska& California pay slightly higher shipping fee,please ask for the invoice CHECK MY OTHER LISTINGS. PLEASE! Thank you for looking at my listing and bidding on it!
|
|
|
I have 1Hilti te 3000 AVR Demo Hammer. It is in perfect working condition. This is a Beast. The best of the best. It is used with alot of life left. It will include 2-Chip pointed bits. The cart and the cord will also get included. Everything you see tlyou get. As soon as you pay I will ship super fast. Before you buy let me know where you live maybe I can give you better deal.
|
|
This item has very little use. Was tested and works great! LW370-F5-1. With an impact rate of 3100 BPM with 9 ft. lbs. of impact energy. This demolition hammer tears through concrete and mortar with ease! Features include a ball bearing construction for extended longevity, an adjustable 360 degree side handle and an ergonomic D-grip handle to give you full control. This jack hammer is great for landscaping or extensive home remodeling! High impact rate: 3100 BPM with 9 ft. lbs. of impact energy, Adjustable 360° side handle and ergonomic D-grip handle, Ball bearing construction for long life, Requires 20 amp. 120 volt circuit. Specifications. Name 10 Amp. 120 Volt Demolition Hammer, SKU 68148, Brand Chicago Electric Power Tools Professional Series, Amperage(amps) 10, Impact(BPM) 3100 BPM, ... moreImpact energy(ft. lb. 9 ft. lbs. Power cord(ft. 16 ft. Quantity 1, Wattage(watts) 1050, Shank size 17mm, Accessories Included bull point and spade chisels. Grease, hex wrench, grease cover wrench and spare motor brushes, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Mikita HM1203c Demolition Hammer You are bidding on a used Mikita HM1203C Demolition Hammer. it's dirty but working. Includes one bit and case. The bit is in used condition. Pretty wore out. Please ask if you have any questions at all! Thank You! Happy Bidding! 43790-1 ckk(crw)
|
|
SKIL model 737 demo hammer(jack hammer) Apple Valley. California) This is a neat old Skill electric demolition hammer. Lots of power and all metal construction it is heavy you must come pick this up I can not mail this. husband died I am cleaning out tool shed this is a SKIL model 737 demo hammer(jack hammer) heavy duty type 1 it is used it dates to about 1950 or 1960 look at pictures I am just cleaning up and cleaning out. Everything is as is, look at picture Vintage. Is well, old and has traveled through time. These items I present have been well loved and have their own stories to tell. They all have natural occurring flaws, which in most cases add to the visual interest. I do my best to point these out for each item but if you are looking for perfection you probably won’t find that here ... moreIf you have any questions please feel free to contact us. As with any vintage item expect that there will be some scuffs and some paint loss due to previous use and weathering. Someone has loved and used this to entertain them self This is a Collectible All items are sold"AS IS" and all sales are final no returns ask If you have any questions shipping price quoted for the 48 US STATES. All others must email for shipping rate some of the items that we list are used. Some vintage and/or collectable. We use pictures as a part of our description so please check the pictures and email if you have any questions. We are not experts in any collecting category we buy and offer things that we like.
|
|
This listing is for a*PERFECT* Hilti TE 70 Combihammer Demolition Hammer Drill w/ 293472 Bit. I am listing this as used. But I doubt it was. It is Perfect in Every Way possible. Case shows very minor scratching) I tested it thoroughly and used the bit briefly to test the hammer action. The bit shows light use on the tip do to this. It works perfect and looks perfect in every way. I may as well have put it as New. Includes the 293472 Masonry Bit w/ Case as seen. Manual, Cloth, Tube of Grease and Hard Carry Case. Please Read Everything Below Before Bidding/Buying* I do apologize if it sounds mean) If you have any issue with the item you receive. I politely ask that you message me Before Leaving FeedBack so we can resolve it. We can resolve most any problem easily. NO International or APO/ FPO ... moreShipping. Additional charges may apply to AK& HI. If it is not pictured or described. Please do not assume it is included; because it likely will not be. I WILL NOT end auctions early for a BIN; so please don't ask as all requests will be ignored. Due to the high volume of non-payers; report will be filed after 5 days of non-payment. TX residents will be charged 8.25% sales tax. The item(s) in the picture(s) is/are exactly the item(s) you will be receiving.
|
|
|
this is a dewalt d25940k 3/4 demolition hammer. this tool has been checked and is in good working condition. the hard case is missing one of the latches but still closes and carrys good
|
|
Milwaukee Max SDS Demo Hammer Model: 5446.21 This Demolition Hammer is in Good Condition with minimal Signs of use. Slight Whitening on the head and some white on the bottom of unit. This Tool works exactly like it should. Features; Heavy Duty Piston that Delivers 8.8 ft lbs impact energy. 2 Speed Impact Settings for lighter jobs Anti Vibration System combined with the Adjustable D Handle make this Hammer Easy to Use. Comes with Manual and Carry Case Also Included are 2 Concrete Bits This is a great Hammer. Perfect for any Demo Job We Are Starting This Auction At $ 372.58 With No Reserve! We Ship Most Items within 5 Days of Receipt of Payment Items are shipped using UPS exclusively Please Feel Free To Contact Us with Any Questions You May Have Thank You Viewing Our Listing& Good Luck Bidding ... moreMembers with a Feedback Rating of 5 Or Less Please Contact Us Prior To Placing a Bid Or Your Bid May Be Canceled Local Pickup is Available: Call 303.952.8000 for Details We Only Accept PayPal asa Form of Payment WE SHIP TO THE LOWER 48 U.S. STATES ONLY We cannot ship to APO or FPO or DPO PayPal Verified Addresses ONLY Check Out Our other items! Be sure to add us to your favorites list! ID#258
|
|
GRUNDOMAT 3" 3.33" Pneumatic Piercing Mole Trench Digging Used Missile Tool 85P Grab a GREAT Deal on a pre-owned! This item is Used in Good Condition. See Photos provided) Additional Details: Labels have worn off the item from use. Was told it is a Grundomat 85P 3-1/3" 3.33" I have a photo of a 4" PVC pipe around it for sample. Whip hose is a little frayed but was seen working. This is a Great tool for plumbing or electric work under lawns or roads. It weighed roughly 100lbs. Which going by the chart the 85P was the closest in length and weight. The Auction is for Just the Tool ONLY. No oiler or extras. For Additional Information Visit: All Photos are of the actual item you are bidding on. What you see is exactly what you will get. Contact me if you have any Questions ... morebefore Bidding. FREE SHIPPING Within the U.S Good Luck& Happy Bidding E
|
|
|
Sullair air demolition hammer.Chisel 15 lb(not tested,for parts or repair) sell as-is.Not tested(come from a surplus of construction company) Shipping 48 states happy bidding
|
|
Macdonald Size C11 5716 Pneumatic Demolition Hammer.No Reserve Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge We are liquidating an estate and this is one of many items we will be listing on eBay. Up for your consideration is: Macdonald C11 Pneumatic Demolition Hammer. No Reserve.To the best of our abilities. We can tell the manufacturer is Macdonald and the Model number SHOULD be a C11 5716. This Item Displays Normal Usage with Handling Marks. We do not have the capabilities to test or check it out, this does not mean that the Unit does not work. This Item APPEARS TO BE IN GOOD WORKING CONDITION. We received this Item as Displayed in Images Below. There are no bits included ... morewith this hammer. Check Out The Images. If you are unhappy with an item or the description is incorrect please contact us before leaving feedback. We are all human and sometimes make mistakes in the descriptions or get interrupted while listing. You can Email us via eBay Website or 407-275-6482 to resolve any problems. All Items Are Sold"AS-IS" with NO"Warranty" Written, expressed or implied. We Ship to the Domestic 48 contiguous states of the United States of America. We do not Ship Internationally. Shipping is through UPS(United Parcel Service) and the Cost is calculated. We Ship Monday-Friday through USPS to the Domestic 48 States. No International Shipping We Ship to the Domestic 48 contiguous states of the United States of America, we do not Ship Internationally Payment is Due within 48 Hours of Auction Close. We DO NOT SHIP INTERNATIONALLY. We Ship to the Domestic 48 contiguous states of the United States of America. We do not Ship Internationally DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000.
|
|
|
You are bidding on a: Bosch Demolition Hammer Model: EW/UHD 450 Watts This item is in GOOD working condition. Bits not included. I will ship FREE to anywhere in the Continental USA! Please note my 14 day return policy. See my 100% satisfaction rating, read my buyer feedback and bid with confidence.
|
|
|
GREAT CONDITION* THIS IS A HILTI TE 3000-AVR BREAKER HAMMER. IT COMES ON THE CART WITH 2 BITS. BUYER TO PAY $150.00 FOR FREIGHT TRUCK SHIPPING TO A BUSINESS ADDRESS WITH A FREIGHT DOCK. A FORKLIFT, OR TO A FREIGHT DOCK IN A MAJOR CITY CLOSE TO YOU. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
|
|
Up For Sale Today MAKITA HM1500 DEMOLITION HAMMER PRE-OWNED IN GOOD WORKING CONDITION COMES WITH PICTURED HARD CASE THE CASE DOES NOT STAY CLOSED AND IS MISSING A LATCH(THE OTHER LATCH IS LOOSE) IF IT IS NOT PICTURED IT IS NOT INCLUDED FREE SHIPPING Please E-mail with any questions or concerns*PLEASE READ* Our Policy: We will only ship to the address you used when checking out. Make sure you change or update your shipping address before you pay. Do not ask us to change the shipping address. It is a violation of Ebay’s policy and your order will be refunded if you ask us to do so· When free shipping is offered. We are referring to the 48 contiguous United States of America· If you live outside of that area shipping is not free and you must ask for a quote before purchasing· If ... moreyou are ordering a large and/or heavy item. And you require it shipped to a P.O. Box, then shipping will not be free. You must also ask for a quote before purchasing· International orders will only be shipped through Ebay’s Global Shipping Program· International shipping is not free and not available in all countries. Please take the time to read about the Global Shipping Program in Ebay’s help section· If shipping is available to your country. The price will be displayed along with any additional fees and surcharges. We do not have the ability to change or eliminate any of the fees associated with the Global Shipping Program· If you use an incomplete shipping address. i.e. you forgot to use your Apt# you will be responsible for paying an additional charge to reship your order. Every order is processed and shipped within 1 business day of your payment clearing. Our shipping department is open Monday-Friday from 10am-5pm EST· We do not ship on Saturday. Sunday or Holidays. If you require a faster method of shipping please contact us before purchasing to make sure you can be accommodated. Every order is handled with care and expertly packed in bubble wrap and/or peanuts. We have been shipping everything
|
|
|
Up for sale is a used KENT TOOLS KCB-3 pneumatic 19 pound class chipping hammer The unit was fully cleaned inspected tested and repainted prior to sale. I bought this chipper 8 years ago for truck repair use and was rarely needed. Has very low hours and I kept it oiled and stored indoors so it still performs just like new REDLINE SERIES- Pneumatic Hand Tools Drop-forged construction KCB-3 Series incorporate a four-bolt. Ergonomically designed handles for operator e3ę and rigid connection to the cylinderTeflon/graphite packing provides cooler operation, needs no adjustment; z
|
|
|
A Sullair Demolition Chipping/Jack hammer with air hose and flat head chisel/bit. The hammer has signs of wear as seen in pictures its not in perfect shape and sat in storage and hasn't been used in awhile but when i got them they worked fine, there are scratches and rust on the handle and flat head but the hose in good used condtion as well. Please email me with any questions
|
|
|